Commit [1] removed virtio-blk-device,drive=hd0 from the Qemu command
line since RISC-V virt target now define a default type for block
devices (virtio) [2].
While it's was working as expected using
qemu_riscv{32,64}_virt_defconfig, it doesn't work for nommu variant.
Without "-device virtio-blk-device,drive=hd0", the virtio block device
virtio0 is missing in dmesg:
Expected dmesg log:
virtio_blk virtio0: 1/0/0 default/read/poll queues
virtio_blk virtio0: [vda] 122880 512-byte logical blocks (62.9 MB/60.0 MiB)
Unlike qemu_riscv{32,64}_virt_defconfig, mmu variant doesn't use
opensbi (-bios none) and disable mmu (-cpu rv{32,64},mmu=off)
from the qemu command line...
Adding back "-device virtio-blk-device,drive=hd0" seems to help Qemu
to enable the virtio block device for nommu target.
This partially revert commit [1].
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/8233227503 (qemu_riscv32_nommu_virt_defconfig)
https://gitlab.com/buildroot.org/buildroot/-/jobs/8233227509 (qemu_riscv64_nommu_virt_defconfig)
[1] dba41736da
[2] 4406ba2b5e
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Align gcc-bare-metal site location to be the same as gcc site location.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove patch that was applied upstream.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patch.
Update README hash for text changes that are not related to license.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps U-Boot to version 2024.10. The new version has added EFI
Capsule support, which depends on GnuTLS, thus requiring the activation of
BR2_TARGET_UBOOT_NEEDS_GNUTLS.
Tested on beaglebone black.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
See here for release notes:
https://www.zabbix.com/rn/rn7.0.5
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The rootfs partition is the first partition, not the second one: the
Grub configuration file already contains root=/dev/sda1 by default,
and it should be changed to root=/dev/vda1 is Qemu emulation is used.
Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
checksec-2.7.1.tar.gz archive was replaced or regenerated by upstream
sometime between the 22 September 2024 [1] and the 29 September 2024
[2].
diffoscope report no changes in extracted files exept a different
top directory name (checksec.sh-2.7.1/checksec-2.7.1):
--- checksec-2.7.1.tar.gz a0d7a444d4603fb3d62fa25ef678e544ef39fa7b3c9bd5d22f1a8c526152cdde
+++ checksec-2.7.1.tar.gz eba0616f4033385d6093608a2a2aad3c2debb847d6778c87346f89c80946684f
Files identical despite different names
--- checksec-2.7.1/ChangeLog
+++ checksec.sh-2.7.1/ChangeLog
Use the git hash of the 2.7.1 release to use a different archive name
than the checksec-2.7.1.tar.gz archive previously released.
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/7888799855
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/7948006849
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7948006849
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bumps to the latest `libspdm 3.5.0` release, this release introduces the
optional SPDM 1.3 `GET/SET_KEY_PAIR` support. Which requires an integrator
to support additional functionality implemented at link time. Leave this
disabled by default as it is optional and so that it does not break build
compatibility with integrators.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This marks the transitioning of the 22.x releases
of nodejs into LTS. [1]
LICENSE hash changed due to
* various new bundled components[2,3,4]
* removed bundled components [5,6]
All new components fall under MIT or Apache license which are already
mentioned in the license field.
All node package tests have been run sucessfully after the update.
[1] https://nodejs.org/en/blog/release/v22.11.0
[2] 77936c3d24
[3] 92439fc160
[4] da6c61def8
[5] 8e4fd2842b
[6] 20a8c96c41
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The systemd service deployed to the target is derived from an example
hardcoded for the /usr/local/sbin/ path, but we install sshguard at
/usr/sbin/. Thus, by default we get this error message:
$ journalctl -b -u sshguard.service -f
systemd[1]: Started SSHGuard - blocks brute-force login attempts.
(sshguard)[612]: sshguard.service: Unable to locate executable '/usr/local/sbin/sshguard': No such file or directory
(sshguard)[612]: sshguard.service: Failed at step EXEC spawning /usr/local/sbin/sshguard: No such file or directory
systemd[1]: sshguard.service: Main process exited, code=exited, status=203/EXEC
systemd[1]: sshguard.service: Failed with result 'exit-code'.
systemd[1]: sshguard.service: Scheduled restart job, restart counter is at 5.
systemd[1]: sshguard.service: Start request repeated too quickly.
systemd[1]: sshguard.service: Failed with result 'exit-code'.
systemd[1]: Failed to start SSHGuard - blocks brute-force login attempts.
Fix up the path in the service after the $(INSTALL) command has run.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In the current systemd package, EFI support is tied to enabling
systemd-boot, but there are some use cases where EFI support is
desired, independently of systemd-boot, for example to mount
automatically efivarfs in /sys/firmware/efi/efivars.
This commit therefore adds a separate option to enable EFI support.
Signed-off-by: Guillaume GC. Chaye <guillaume.chaye@zeetim.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch fixes a regression [1] introduced in ntpd 4.2.8p18 [2].
ntpd[200]: Listen normally on 3 lo [::1]:123
ntpd[200]: bind(20) AF_INET6 [fe80::bf3d:254d:dee0:d345%3]:123 flags 0x811 failed: Cannot assign requested address
ntpd[200]: unable to create socket on enp0s3 (4) for [fe80::bf3d:254d:dee0:d345%3]:123
ntpd[192]: daemon control: got EOF
ntpd[192]: daemon child died with signal 11
systemd[1]: ntpd.service: Control process exited, code=exited, status=70/SOFTWARE
systemd[1]: ntpd.service: Failed with result 'exit-code'.
systemd[1]: Failed to start Network Time Service.
If the IPv6 link-local interface was not ready for binding on the first
attempt, ntpd would segfault in update_interfaces(). The segfault would
only occur when ntpd was started as part of the boot sequence. Most
- but not all - boots were affected. Evidently it could happen that the
timing of ntpd's start up was delayed enough that the IPv6 link-local
interface was ready for the bind() call when it was first issued by
open_socket() via create_interface().
[1]: https://bugs.ntp.org/show_bug.cgi?id=3928
[2]: https://bugs.ntp.org/show_bug.cgi?id=3913
Signed-off-by: TIAN Yuanhao <tianyuanhao3@163.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
when pam_lastlog.so is not installed login issues an error
that it is not able to load it.
Hence only enable the entry when pam_lastlog.so is installed.
Fixes:
login[649]: PAM unable to dlopen(/lib/security/pam_lastlog.so): /lib/security/pam_lastlog.so: cannot open shared object file: No such file or directory
login[649]: PAM adding faulty module: /lib/security/pam_lastlog.so
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Ethernet MAC address of the Acqua board is stored in an onboard
EEPROM. Its location is described in the device tree as:
eeprom@58 { // NVMEM node
// EEPROM parameters...
eth0_addr: eth-mac-addr@9A { // NVMEM cells
reg = <0x0 0x06>;
};
};
Since Linux 6.5, defining NVMEM cells this way, as direct children of
the NVMEM node, is deprecated. It is instead recommended to wrap the
cells inside a "fixed-layout" node.
The older, deprecated syntax is still supported on Linux 6.6. Since
Linux 6.7 (commit 2cc3b37f5b6d: "nvmem: add explicit config option to
read old syntax fixed OF cells") however, it is only supported by
selected NVMEM drivers. It is not supported by the at24 driver used to
access the Acqua's onboard EEPROM.
Update the device tree to the new, recommended, syntax. This makes it
work with newer kernels, while preserving compatibility with the
currently used 6.6.30.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit
a39e0b95e1 ("package/qt6/qt6base: add
support for concurrent module"), we have an explicit option that
enables/disables concurrent support, so it no longer makes sense to
explicitly disable it unconditionnally first.
Signed-off-by: Hannah Kiekens <hannah.kiekens@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the package was introduced in Buildroot commit
3cb185d3df, it has been failing to build
on !wchar configurations. Let's add the missing dependency on wchar
support.
Fixes:
https://autobuild.buildroot.org/results/f5c543bcf57181373680d0c16a1814d21b000bcf
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The homepage has moved, the previous one links to the new URL.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
[yann.morin.1998@free.fr: split into its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, goi depends on cairo.
So far, this would not cause any issue, but once we bump libglib2 and
goi, that would cause a circular dependency chain, where goi would
depend on cairo, cairo on libglib2, and libglib2 back on goi...
However, in goi, cairo is only needed to build some tests, and thus we
do not need that dependency, even before we update goi+libglib2.
Thanks to Fiona for helping sorting the issue out.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <adam.duskett@amarulasolutions.com>
Cc: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
License hash changed due to [1].
[1] 595cf21334
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This was already done in start(), but not in stop() and reload().
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch brings package/chrony/S49chronyd in line with the start
script standards. Note that users will need to update the location of
any script config from /etc/default/chrony to /etc/default/chronyd.
One deviation from the standard remains (and thus the check-package
override): The PID file is placed in /var/run/chrony/$DAEMON.pid. This
is necessary because chronyd drops privileges, and would not be able
to delete the PID file from root-owned /var/run on shutdown.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build system has been switched to meson upstream.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove patch that was merged upstream.
Changelog: https://github.com/raboof/nethogs/releases/tag/v0.8.8
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes a crash when using the libhttp-parser dependency, which is the
configuration that we use in buildroot.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
