Previously, AUTOPOINT was hardcoded to /bin/true in autoconf.mk.
Moving the definition of this variable into AUTOCONF_ENV as part of the
autotools infrastructure will allow us to conditionally set the variable
based on package flags to support migrating away from FOO_GETTEXTIZE.
While we're at it, split the overly long line that defines AUTORECONF,
wrapping at 80 columns.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
[Arnout: split long line]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since version 2.70 (which was skipped when bumping to 2.71 in ecd54b65c1)
autoreconf checks if a package uses gtkdoc by check if the macro GTK_DOC_CHECK
is used. If detected, gtkdocize will be run as part of the reconfiguration
process.
http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commit;h=dd880a0a6de5602cdd40b770ed6b083b34aa0768
If gtkdocize is not installed, this fails with:
Can't exec "gtkdocize": No such file or directory at /home/buildroot/autobuild/instance-1/output-1/host/share/autoconf/Autom4te/FileUtils.pm line 293.
autoreconf: error: gtkdocize failed with exit status: 2
Defining GTKDOCIZE ensures, that autoreconf succeeds without gtkdocize.
Fixes:
http://autobuild.buildroot.net/results/d0259d1f8bed195e35338ead6c7c33fcc571497a/
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The first include path is special in aclocal. For example it is the path
for the --install option. Also, the first include is treated in a
special way if it doesn't exists. This might be the case if there is the
following construct:
configure.ac: AC_CONFIG_MACRO_DIR([m4])
Makefile.am: ACLOCAL_AMFLAGS="-I m4"
If the package doesn't have local macros, the m4/ directory might not
exist. aclocal will then just issue a warning instead of aborting the
execution with a fatal error. See discussion here:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=565663
Don't use the "-I" option in aclocal. Instead use ACLOCAL_PATH to pass
the system-wide include dirs.
As a side effect this should fix the use of $(ACLOCAL) alone. Up until
now, $(ACLOCAL) didn't include the ACLOCAL_HOST_DIR system include path.
autoreconf will pass the "-I" options to every tool it runs, of which
aclocal, which, as seen above, we don't want. So move the argument down
to each individual tool, except for aclocal.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: slight rewording of the commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/bin' | xargs sed -i 's%$(HOST_DIR)/usr/bin%$(HOST_DIR)/bin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for GPLv3/GPLv3+ is GPL-3.0/GPL-3.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv3\>/GPL-3.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Autogenerated from rename-patch.py (http://patchwork.ozlabs.org/patch/403345)
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The variable ACLOCAL_DIR points to the staging area but is not useful
anymore because the target package was removed. Fix ACLOCAL_DIR by
pointing to $(HOST_DIR)/usr/share/aclocal and remove ACLOCAL_HOST_DIR
because ACLOCAL_DIR has the same value so it's not useful anymore.
Also remove the reference to ACLOCAL_HOST_DIR from the host-autoconf
package.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The autoconf support on target has been deprecated for more than four
buildroot releases and thus can be removed. This doesn't change anything
about the host autoconf support.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to keep better track of when a feature got deprecated, and hence
when it can be removed, a new set of symbols BR2_DEPRECATED_SINCE_xxxx_xx is
introduced. These symbols are automatically selected when BR2_DEPRECATED is
selected, and thus are transparent to the user.
A deprecated feature will no longer depend on BR2_DEPRECATED directly, but
rather on the appropriate BR2_DEPRECATED_SINCE_xxxx_xx. If that symbol does
not yet exist, it has to be created in Config.in.
When removing a deprecated feature, one should also check whether this was
the last feature using the BR2_DEPRECATED_SINCE_xxxx_xx symbol, in which
case the latter can be removed from Config.in.
A followup patch will make sure the overview is added to the list of
deprecated features in the manual, so that a buildroot core developer can
easily determine which features to remove in a given development cycle.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: leave change xz tarball format to not end up with circular deps]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When building autoconf for the target, we already passed EMACS="no" to
prevent autoconf from building Emacs mode files. But we weren't doing
that when building autoconf for the host. This causes problems when
'emacs' is not really emacs, but a sort of clone like Jove. So we also
pass EMACS="no" when building host-autoconf to avoid autoconf
./configure script from detecting emacs and then use it to build .elc
files from .el source code.
Reported-by: Spielmann Werner <Werner.Spielmann@swarovski.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Finally get rid of all := used for variable definitions in packages,
as we suggest in our manual and during the review of new packages.
While I was at it, I also sometimes added a few missing new lines
between the header and the first variable definition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
automake, autoconf, libtool and make on the target are basically
useless if we don't support building a toolchain on the target. Of
course, the host variant of automake, autoconf and libtool will remain
available.
[Peter: fixup to apply after perl change]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since perl no longer requires host-qemu, autoconf and automake work
again on the architectures that are not supported by host-qemu.
This reverts commit c65d92e8e2.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we're using full perl (which needs qemu), only make auto{conf,make}
available on the supported archs.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We currently don't build a host-gettext package, so when a package using
gettext is autoreconf'ed, we end up using autopoint from the host.
Autopoint unfortunately requires CVS, so if that isn't available autoreconf
fails.
From reading:
http://www.gnu.org/software/gnulib/manual/html_node/gettextize-and-autopoint.html
It seems that we don't really need to rerun autopoint, so fix it by
passing autopoint=/bin/true instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Autoconf would append -dirty to it's version number, causing build breakage
with packages explicitly requesting autoconf 2.65, if built in a subdir
of a git tree with uncommitted changes. This is a relatively common
situation when developing on BR.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since we are preparing a package generation mechanism, we would like
to avoid packages that move/touch/modify files which are not part
of their own package. That's why we try to not install host files into
the staging directory (in this case .m4 files) and instead we include
$(HOST_DIR)/usr/share/aclocal into autoreconf search directory.
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that <pkg>_INSTALL_TARGET_OPT always defaults to
'DESTDIR=$(TARGET_DIR) install', we can remove the
<pkg>_INSTALL_TARGET_OPT definition from a lot of packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
autoheader is used by autoreconf, therefor we need to give the right
path to this tools for host/target autoreconfiguration.
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
autoconf >= 2.64 was broken when /bin/sh is symlinked to dash. This
has been fixed post-2.65 by the commit at
http://git.savannah.gnu.org/cgit/autoconf.git/commit/?id=7f75858f577f11a844781764f30cd42cfe8a5669.
Compared to the original patch, the patch included in Buildroot
manually does the change to the ./configure script itself. Otherwise,
the compilation of host-autoconf would require host-autoconf itself.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Hardcode m4 config instead of letting configure detect it automatically.
This hopefully fixes the build issues some (Ubuntu) users seems to be
having lately (E.G. #679).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We have been passing -q to ./configure when using 'make -s' for
packages using Makefile.autotools.in for some time. Do the same
for packages using autotools, but not using the
Makefile.autotools.in infrastructure, taking care to not do it
for packages with hand written configure scripts.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This release of autoconf brings a number of bug fixes, including a change
to the autoreconf script to pass the correct include path parameter to
aclocal.
Signed-off-by: Will Newton <will.newton@gmail.com>
A C library will have been built by the toolchain makefiles, so there is no
need for packages to explicitly depend on uclibc.
Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
