During the hackathon in Vienna, it was decided [0] to stop requiring
annotated defconfig files, and that they should all be regenerated.
This commit does just that.
This is a mechanical change, achieved by running (the defcfg script is
repriducedc at the end of the commit log):
$ for cfg in configs/*_defconfig; do
./defcfg "${cfg##*/}" || break
done
Out of our 302 defconfig files, only 247 needed regenerating, which
means that about 1 in 5 was already not providing the requested
annotations.
To be noted: three defconfig files had duplicate definitions, which this
commit resolves:
nitrogen6sx_defconfig
nitrogen7_defconfig
olimex_a33_olinuxino_defconfig
warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS
[0] https://elinux.org/Buildroot:DeveloperDaysELCE2024#Rules_for_defconfigs
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
====
Below is the script to reproduce the commmit. What it does is regenerate
the configuration first, then applies a patch to update kernel headers
to 3.11, and then recalls the defconfig again, and finally verifies that
the 3.11 headers are not selected (and ignores whether the latest are
selected or not): we want to catch whether defconfig that were using
3.10, currently the latest we support, would stioll get those headers
after we regeerate those.
--->8------>8------>8------>8------>8---
#!/bin/sh
cfg="${1}"
git checkout -- package/linux-headers/Config.in.host toolchain/Config.in
make "${cfg}"
make savedefconfig
patch -p1 <<_EOF_
diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host
index 2ae4077ffe..e669f89267 100644
--- a/package/linux-headers/Config.in.host
+++ b/package/linux-headers/Config.in.host
@@ -129,8 +129,12 @@ choice
If your kernel headers are more recent than the latest version
in the choice, then select the latest version.
+config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11
+ bool "6.11.x or later"
+ select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
+
config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10
- bool "6.10.x or later"
+ bool "6.10.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9
diff --git a/toolchain/Config.in b/toolchain/Config.in
index 6e91ab756c..c2522aca7f 100644
--- a/toolchain/Config.in
+++ b/toolchain/Config.in
@@ -656,6 +656,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
bool
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
+
+config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
+ bool
+ select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
select BR2_TOOLCHAIN_HEADERS_LATEST
# This should be selected by the latest version, above, to indicate that
@@ -669,6 +673,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST
# stops affecting a value on the first matching default.
config BR2_TOOLCHAIN_HEADERS_AT_LEAST
string
+ default "6.11" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
default "6.10" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
default "6.9" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
default "6.8" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_8
_EOF_
make "${cfg}"
git checkout -- package/linux-headers/Config.in.host toolchain/Config.in
diff="$(
diff -I '_6_11\|BR2_TOOLCHAIN_HEADERS_LATEST=y' -du \
<( tail -n +5 .config.old ) \
<( tail -n +5 .config )
)"
if [ "${diff}" ]; then
printf 'Not idempotent for "%s"\n' "${cfg}" >&2
exit 1
fi
---8<------8<------8<------8<------8<---
====
To verify that no other changes are made to the defconfigs that are
risky when the defaults change, we ran the following simple script
(where buildroot-prev is a checkout just before this commit). It shows
that there are many settings removed because they are default, but none
of them run the same risk that the default is going to be changed in the
future.
for i in configs/*_defconfig; do
diff="$(diffconfig ../buildroot-next/$i $i)"
if [ -n "$diff" ]; then
echo "==> $i"
echo "$diff"
echo
fi
done
--->8------>8------>8------>8------>8---
==> configs/aarch64_efi_defconfig
-BR2_TARGET_GRUB2_ARM64_EFI y
==> configs/acmesystems_aria_g25_128mb_defconfig
-BR2_arm926t y
==> configs/acmesystems_aria_g25_256mb_defconfig
-BR2_arm926t y
==> configs/acmesystems_arietta_g25_128mb_defconfig
-BR2_arm926t y
==> configs/acmesystems_arietta_g25_256mb_defconfig
-BR2_arm926t y
==> configs/amarula_vyasa_rk3288_defconfig
-BR2_PACKAGE_HOST_UBOOT_TOOLS y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/armadeus_apf27_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/armadeus_apf28_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/armadeus_apf51_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/aspeed_ast2600evb_defconfig
-BR2_ARM_FPU_VFPV4D16 y
==> configs/asus_tinker-s_rk3288_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/at91sam9260eknf_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9g20dfc_defconfig
-BR2_TARGET_ROOTFS_TAR y
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_TARGET_ROOTFS_UBIFS_LEBSIZE 0x1f800
-BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE 0x800
-BR2_TARGET_ROOTFS_UBI_PEBSIZE 0x20000
-BR2_TARGET_ROOTFS_UBI_SUBSIZE 512
-BR2_arm926t y
==> configs/at91sam9g45m10ek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9rlek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9x5ek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9x5ek_dev_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9x5ek_mmc_defconfig
-BR2_arm926t y
==> configs/at91sam9x5ek_mmc_dev_defconfig
-BR2_arm926t y
==> configs/atmel_sama5d3_xplained_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d3_xplained_dev_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d3xek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d4_xplained_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d4_xplained_dev_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/bananapi_m2_ultra_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/bananapro_defconfig
-BR2_ARM_EABIHF y
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/beaglebone_qt5_defconfig
-BR2_PACKAGE_TI_SGX_KM y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/beagleboneai64_defconfig
-BR2_TARGET_TI_K3_BOOT_FIRMWARE y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT y
==> configs/beelink_gs1_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/canaan_kd233_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/ci20_defconfig
-BR2_KERNEL_HEADERS_AS_KERNEL y
-BR2_PACKAGE_HOST_UBOOT_TOOLS y
-BR2_TARGET_UBOOT_SPL_NAME "spl/u-boot-spl.bin"
==> configs/cubieboard2_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/freescale_imx28evk_defconfig
-BR2_arm926t y
==> configs/friendlyarm_nanopi_r2s_defconfig
-BR2_cortex_a53 y
==> configs/globalscale_espressobin_defconfig
-BR2_cortex_a53 y
==> configs/hifive_unleashed_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_GENERIC_GETTY y
==> configs/imx23evk_defconfig
-BR2_arm926t y
==> configs/imxrt1050-evk_defconfig
-BR2_LINUX_KERNEL_ZIMAGE y
==> configs/khadas_vim3_defconfig
-BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE "khadas-vim3"
==> configs/kontron_bl_imx8mm_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/kontron_pitx_imx8m_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/kontron_smarc_sal28_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/lafrite_defconfig
-BR2_cortex_a53 y
==> configs/lego_ev3_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_arm926t y
==> configs/linksprite_pcduino_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/ls1046a-frwy_defconfig
-BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM "ls1046"
==> configs/mx6cubox_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/nexbox_a95x_defconfig
-BR2_cortex_a53 y
==> configs/nitrogen6sx_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/nitrogen6x_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/nitrogen7_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/nitrogen8m_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/nitrogen8mm_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/nitrogen8mn_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/nitrogen8mp_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/odroidc2_defconfig
-BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY y
==> configs/olimex_a10_olinuxino_lime_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a13_olinuxino_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a20_olinuxino_lime2_defconfig
-BR2_ARM_EABIHF y
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/olimex_a20_olinuxino_lime_defconfig
-BR2_ARM_EABIHF y
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/olimex_a20_olinuxino_micro_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a33_olinuxino_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a64_olinuxino_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/olimex_imx233_olinuxino_defconfig
-BR2_arm926t y
==> configs/openblocks_a6_defconfig
-BR2_arm926t y
==> configs/orangepi_lite2_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_cortex_a53 y
==> configs/orangepi_one_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_one_plus_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_cortex_a53 y
==> configs/orangepi_pc_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_pc_plus_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_r1_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_zero2w_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/orangepi_zero3_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/orangepi_zero_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_zero_plus2_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/orangepi_zero_plus_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/pine64_defconfig
-BR2_cortex_a53 y
==> configs/pine64_sopine_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_cortex_a53 y
==> configs/qemu_aarch64_sbsa_defconfig
-BR2_TARGET_GRUB2_ARM64_EFI y
==> configs/qemu_aarch64_virt_defconfig
-BR2_cortex_a53 y
==> configs/qemu_arm_versatile_defconfig
-BR2_arm926t y
==> configs/qemu_arm_vexpress_defconfig
-BR2_ARM_FPU_VFPV3D16 y
==> configs/qemu_arm_vexpress_tz_defconfig
-BR2_PACKAGE_LIBOPENSSL y
==> configs/qemu_m68k_mcf5208_defconfig
-BR2_LINUX_KERNEL_VMLINUX y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_m68k_q800_defconfig
-BR2_LINUX_KERNEL_VMLINUX y
-BR2_TARGET_GENERIC_GETTY y
-BR2_m68k_68040 y
==> configs/qemu_microblazebe_mmu_defconfig
-BR2_microblaze y
==> configs/qemu_microblazeel_mmu_defconfig
-BR2_microblaze y
==> configs/qemu_mips32r2_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips32r2el_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips32r6_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips32r6el_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64el_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64r6_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64r6el_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_ppc64le_powernv8_defconfig
-BR2_powerpc_power8 y
==> configs/qemu_ppc64le_pseries_defconfig
-BR2_powerpc_power8 y
==> configs/qemu_ppc_bamboo_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_ppc_g3beige_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_ppc_mpc8544ds_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv32_nommu_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv32_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv64_nommu_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_RISCV_64 y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv64_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_RISCV_64 y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_sh4_r2d_defconfig
-BR2_sh4 y
==> configs/qemu_sparc64_sun4u_defconfig
-BR2_sparc_v9 y
==> configs/qemu_sparc_ss10_defconfig
-BR2_sparc_v8 y
==> configs/qemu_x86_defconfig
-BR2_i386 y
==> configs/raspberrypi0_defconfig
-BR2_ARM_EABIHF y
==> configs/raspberrypi0w_defconfig
-BR2_ARM_EABIHF y
==> configs/raspberrypi2_defconfig
-BR2_ARM_EABIHF y
==> configs/raspberrypi3_64_defconfig
-BR2_cortex_a53 y
==> configs/raspberrypi3_qt5we_defconfig
-BR2_PACKAGE_KMOD y
-BR2_PACKAGE_QT5BASE_JPEG y
-BR2_PACKAGE_QT5BASE_PNG y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/raspberrypi_defconfig
-BR2_ARM_EABIHF y
==> configs/riotboard_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/rock64_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/rock_pi_n8_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/rockpro64_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/s6lx9_microboard_defconfig
-BR2_microblaze y
==> configs/sheevaplug_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_NETWORK n
-BR2_arm926t y
==> configs/sipeed_maix_bit_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maix_bit_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/sipeed_maix_dock_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maix_dock_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/sipeed_maix_go_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maix_go_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/sipeed_maixduino_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maixduino_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/snps_archs38_hsdk_defconfig
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/solidrun_clearfog_gt_8k_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n
==> configs/solidrun_macchiatobin_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n
-BR2_TARGET_ROOTFS_TAR y
-BR2_TARGET_UBOOT_USE_DEFCONFIG y
==> configs/spike_riscv64_defconfig
-BR2_RISCV_64 y
==> configs/ts5500_defconfig
-BR2_i386 y
-BR2_x86_i586 y
==> configs/versal_vck190_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/versal_vpk180_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_kria_kd240_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_kria_kr260_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_kria_kv260_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_zcu102_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_zcu104_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_zcu106_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
---8<------8<------8<------8<------8<---
This moves some configs in the defconfigs and removes some comments so
the defconfig files look similar.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This installs Raspberry Pi Model B rev 1.0 device-tree blob.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux 6.1 has been marked LTS for a long time now. Time to bump
Linux for RaspberryPi's to the latest 6.1.61 Since April 2022
the RaspberryPi defconfigs have compressed kernel module enabled
by default. (see [1] and [2]).
To load compressed kernel modules kmod and xz packages are needed
because busybox doesn't support it.
For testing I used RaspberryPi 2, 3(32+64bit) and 4(32+64bit), all with mdev enabled.
[1] c45b4223a4
[2] https://github.com/raspberrypi/linux/issues/4966
Signed-off-by: Bram Oosterhuis <dev@bybram.com>
Reviewed-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Raspberry-Pis Linux kernel is now based on 5.10.76. The previous release
was 5.10.63.
Signed-off-by: Julien Grossholtz <julien.grossholtz@openest.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Try to be less smart (focused on the one target/one use-case),
instead reduce the rpi-firmware package to a selectable list
of (verbatim) installed firmware files.
- change rpi-firmware config handling from rpi-variant/rpi-flavour
choices to bootcode.bin, pi-default/-extended/-cut-down and
pi4-/default/-extended/-cut-down selection
- add BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE option to select installable
config.txt file
- remove config.txt modify code/handling from raspberry post-image.sh
script
- add different customized config.txt files to the raspberry board
section
- change dtoverlay krnbt from 'dtoverlay=miniuart-bt,krnbt=on' to extra line
with explanation comment
- change raspberry defconfigs to select appropiate rpi-firmware
and config.txt files
- change genimage-raspberrypi4.cfg/genimage-raspberrypi4-64.cfg to
use start4.elf and fixup4.dat
- update board/raspberrypi/readme.txt (add optional files fixup4.dat,
start4.elf and zImage)
With this changes a better support for custom use-cases should
be possible, specially multi-target SD cards as suggested by
Stefan Agner ([1]).
[1] http://lists.busybox.net/pipermail/buildroot/2021-February/303318.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: fix case of no config.txt provided]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 8c3f281626 (configs/rpi: fix defconfigs after upstream rebased)
attempted to point the raspberrypi defconfigs to an existing commit in
the linux rpi repository.
However, in doing so, only a partial replacement was done: the version
string in the tarball filename was not replaced (missing 'g' to the sed
expression).
Fix that now.
Reported-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Branches in the Rappberry Pi linux repository are often rebased, which
means that commits that are not reachable from a reference (tag,branch)
will eventually get garbage-collected.
This is probably what hapenned with the commit we are curently
referencing in our defconfig files.
Swith to using the current HEAD of the rpi-5.10.y brnch, in lieue of the
previous one.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now based on 5.10.33 (from 5.10.1).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now based on 5.10.1 (from 5.4.80).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now based on 5.4.61 (from 5.4.51)
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now based on 4.19.126 (from 4.19.113).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now based on 4.19.97 (from 4.19.75).
Go back to sha1 version scheme instead of official tag (after
only two tag versions) to get an up-to-date kernel version
(as the offical last tag is for 4.19.94).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's the latest original version. The defconfig and
package/rpi-firmware changes are done in a single patch, as they are
going together.
Signed-off-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to Linux 4.19 in commit
ed02414e9c, the number of kernel modules
built has increased significantly, to the point where the default of
60 MB for the ext4 image is no longer sufficient, so let's increase to
120 MB.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339561
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now based on 4.19.23 (from 4.14.98) and bump linux header
version accordingly and needs host openssl.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now based on 4.14.29 (from 4.9.79)
Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: adjusted on top of Yann E. Morin changes to use a tarball
instead of a git clone.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The linux git trees on github can be huge, and takes a long time to
download, which is not very nice nor convenient for newcomers.
Switch them to using a wget, with the github macro.
A nice side effect of this conversion, is that we no longer need to wait
for the git clone to finish to notice that the ref is gone; doing a wget
will instantly fail in that case.
Mechanical patch, obtained by running (hang-on tight):
$ sed -r -i -e 's/BR2_LINUX_KERNEL_CUSTOM_GIT/BR2_LINUX_KERNEL_CUSTOM_TARBALL/; /BR2_LINUX_KERNEL_CUSTOM_REPO_URL/N; s:BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https\://github.com/([^/]+)/(.+)"\nBR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="(.+)":BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,\1,\2,\3)/linux-\3.tar.gz":; s/(call github.*)\.git/\1/;' $(grep -l 'BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com' configs/*)
olimex_a20_olinuxino_lime_mali had a comment in between, so it was
manually fixed thereafter; that comment was also moved.
Except for socrates_cyclone5 which did not work previously (missing tag
in git tree?), all the affected defconfigs still download their sources.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current Buildroot defconfigs for Raspberry Pi and Raspberry Pi 2
instantiate a console on tty1, which appears on HDMI. Add a console on
the serial port (ttyAMA0) to be more consistent with other defconfigs
and provide a better out-of-the-box experience to users used to have a
serial console from Buildroot defconfigs.
This requires three changes:
1. have two 'console=' entries in the kernel command line: tty1,
then ttyAMA0;
2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
a getty on the last console= passed to the kernel, ttyAMA0;
3. add a new getty on tty1 to the generated inittab.
Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.
Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.
Note: instead of simply adding a new getty on ttyAMA0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate an HDMI console, then instantiate a really-serial
console on another line.
The result is these two inittab lines:
console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL
tty1::respawn:/sbin/getty -L tty1 0 vt100 # HDMI console
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since quite some time, the kernel and bootloader communities consider
zImage as the default format for kernel images on ARM, replacing
uImage. The load address information in uImage is no longer needed,
since the kernel is position-independent in terms of physical address,
except on a few old platforms. For most people, using zImage is simply
better/simpler, so let's switch to zImage as the default image format
on ARM.
All defconfigs are updated: 46 defconfigs no longer need to select
explicitly zImage because it's the default, and 16 defconfigs now need
to explicitly select uImage because that's no longer the default.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Acked-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For most defconfigs, it was trivial to deduce the kernel version, by
just reading the version string, which could be:
- a standard upstream version string vX.Y.Z
- a non-standard version string, but still containg the standard X.Y.Z
Those for which it was not so trivial were those hosted on git tree.
Since most were already using a custom linux-headers version, it could
be easily deduced from that. It was confirmed by browsing said git trees
and check the version there.
There are a few cases were there was a mismatch:
- microzed: uses a 3.18 kernel, but 3.8 headers; fixed.
- xilinx_zc706: uses a 3.14 kernel, but 3.8 headers; fixed.
- zedboard: uses a 3.18 kernel, but 3.8 headers; fixed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
