The patch bumps the Linux kernel to version 6.10.13 and U-Boot to
version 2024.10. As for U-Boot, the new version has added EFI Capsule
support, which depends on GnuTLS, thus requiring the activation of
BR2_TARGET_UBOOT_NEEDS_GNUTLS.
Arm trusted firmware is already up to date.
Co-developed-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Introduce the initial base-port support for the SK-AM62P reference board
made by Texas Instruments.
Signed-off-by: Bryan Brattlof <bb@ti.com>
[Arnout: extend explanation of tiboot3.bin]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When building the rock5b with BR2_PER_PACKAGE_DIRECTORIES enabled, the
following error occurs from U-Boot.
tools/mkeficapsule.c:19:10: fatal error: uuid/uuid.h: No such file or
directory
19 | #include <uuid/uuid.h>
| ^~~~~~~~~~~~~
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Julien Olivain <ju.o@free.fr>
The SBSA Reference Platform was updated to neoverse-n1 (armv8.2a) in
Qemu v8.1 [1].
BR2_cortex_a57:
# cat /proc/cpuinfo
processor : 0
BogoMIPS : 2000.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x1
CPU part : 0xd07
CPU revision : 0
[...]
BR2_neoverse_n1:
# cat /proc/cpuinfo
processor : 0
BogoMIPS : 2000.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp ssbs
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x4
CPU part : 0xd0c
CPU revision : 1
[...]
Tests test_fwts.py test_edk2.py using
BR2_TARGET_EDK2_PLATFORM_QEMU_SBSA=y are not updated to neoverse-n1 by
this commit. Those tests were disabled in a previous commit. Those
tests will be updated and fixed in followup commits.
Note: SBSA Reference Platform was recently updated again to neoverse-n2
(armv9.0a) in Qemu v9.1 [2]. But there is no armv9.0a support yet in
Buildroot.
[1] 1877272bad
[2] b1d592e7b0
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Julien: add a small comment in commit log about tests]
Signed-off-by: Julien Olivain <ju.o@free.fr>
qemu_aarch64_sbsa_defconfig doesn't boot since the qemu version bump to
9.0 [1]. Sync the ATF version with the one (v2.11) used by Qemu tests
[2].
Since we use a released version of ATF, we switch to ATF custom version
to use the official ATF repository instead of the read-only mirror on
ARM-software's github.
This doesn't fix yet this defconfig due to a bug in edk2 as mentioned
in the qemu commit log [2].
With the edk2 version bump applied, this defconfig doesn't boot with
ATF v2.10-lts but boot successfully with ATF v2.11.
[1] 103a55028c
[2] 24a7cd6a7c
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch adds support for Xilinx Versal VEK280 Evaluation Kit.
VEK280 features can be found here:
https://www.xilinx.com/products/boards-and-kits/vek280.html
The VEK280 requires a patch for the memory node in the dts file because it is
not currently correct. This patch has been applied to the linux-xlnx repo and
will be included in the 2024.2 release.
Upstream: 3c7a97d99b
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Julien: regenerated defconfig with savedefconfig for config ordering
and kept BR2_TARGET_XILINX_PREBUILT_VERSION]
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch adds a basic support for the Bluefied3 board from
Mellanox/NVIDIA:
- https://www.nvidia.com/en-us/networking/products/data-processing-unit/
Brief summary of the board features:
- multicore ARM
- 16 Core ARM Processor
- DDR4: 16GB/32GB
- 2x embedded CX7
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Reviewed-by: Julien Olivain <ju.o@free.fr>
[Julien:
- remove add-custom-hashes from the commit log
- add link for upstream kernel hashes
- check hash with pgp
- reflow the readme.txt
- regenerated defconfig with make savedefconfig]
Signed-off-by: Julien Olivain <ju.o@free.fr>
The patch bumps U-Boot to version 2024.10. The new version has added EFI
Capsule support, which depends on GnuTLS, thus requiring the activation of
BR2_TARGET_UBOOT_NEEDS_GNUTLS.
Tested on beaglebone black.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When bumping the Linux kernel version I inadvertently removed the pinned
linux-headers version from the defconfig which can break the build if
the default kernel version is not v6.10. Pin linux-headers to the
current am62ax-sk kernel version.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Qemu 9.1.0 removed support for NIOS2 emulation, so we can't
no longer test it when updating Qemu zo 9.1.0.
Furthermore it seems that NIOS2 architecture will be soon
deprecated in the toolchain support.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable Andes SPI_burn tool for updating buildroot generated
bootloader and device-tree blob onto flash memory.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update Linux, U-Boot, and TF-A to the latest versions used by NXP's
Yocto project.
Drop the patches from board/freescale/common as the TF-A patches are
upstream.
Switch the Linux defconfig to the default ARM64 defconfig, as is done by
the NXP Yocto build.
The updated Linux kernel increases the rootfs size to 122MB so we bump
the rootfs size slightly to match.
See: https://github.com/nxp-qoriq/yocto-sdk/tree/scarthgap
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update Linux, U-Boot, and TF-A to the latest versions used by NXP's
Yocto project.
Drop the patches from board/freescale/common as the TF-A patches are
upstream.
The updated Linux kernel increases the rootfs size to 122MB so we bump
the rootfs size slightly to match.
Yocto project: https://github.com/nxp-qoriq/yocto-sdk/tree/scarthgap
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/7803199902
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 6.1.112. The size of xipImage
has increased by only 54 bytes (1669958 bytes compared to 1669904 in
version 6.1.98).
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps U-Boot to version 2024.10.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 5.15.167.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 5.15.167 and U-Boot to
version 2024.10.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 5.15.167 and U-Boot to
version 2024.10.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel to 6.10.12 and add the dependency on host-python3.
- Bump U-Boot to 2024.07.
- Bump TF-A to v2.11. Remove the stdout patch, which is present
upstream. Remove our hash file now that the arm-trusted-firmware
package centralises those.
- Bump FVP to 11.27.19 in the documentation.
- Convert to `make savedefconfig' format.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Having the uboot environment defined on the SD card allows the user to
use the uboot setenv and saveenv commands to make persistent changes
(e.g. to change the boot order, or to set a server IP for PXE boot).
Set the uboot-env partition type GUID to "U-Boot environment", see:
https://github.com/u-boot/u-boot/blob/v2024.10/doc/README.gpt#L288https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
and enable CONFIG_PARTITION_TYPE_GUID such that uboot will automatically
find the SD card partition to store/load the uboot environment to.
We need to mark the root partition as bootable, otherwise uboot will no
longer be able to boot the partition by default. (Most likely because
the root partition is now no longer the first partition on the device.)
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to the latest release tag: linux4microchip+fpga-2024.09.1.
This includes the latest features and bug fixes. The main highlights
include a kernel version bump from v6.6.35 to v6.6.51 and a fix for the
Microchip mpfs-auto-update driver.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to latest release tag: linux4microchip+fpga-2024.09. This
includes the latest features and bug fixes.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel to v6.10.14 and add the dependency on host python3.
- Bump U-Boot to v2024.10 and add the dependency on GnuTLS and
util-linux (for uuid).
- Bump TF-A to v2.11.
- Turn on hashes verification and add hashes for the Linux kernel and
U-Boot.
- Fix shellcheck warnings in the post-build script.
- Remove the related exceptions in .checkpackageignore.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Suniel Mahesh <sunil@amarulasolutions.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Newer uboot versions contain commit ebb0ad4eef0a ("arch: arm:
mach-rockchip: Kconfig: Enable BOOTSTD_FULL for RK3399 and RK3588"),
which enables BOOTSTD_FULL for RK3588, making it easier to figure
out issues with the bootflow, if any.
Also add the GnuTLS dependency which is needed for uboot 2024.10.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A bunch of new hardware has been enabled for rock5b in linux 6.11,
most notably USB3 host controller support, GPU support, cpufreq
support, and PCIe endpoint mode support.
Add the dependency on host python3 that is new since linux 6.10.
Also add the missing dependency on openssl (which has been needed for
a long time, since we are using arm64 defconfig, but only shows up as
an error if the host system doesn't have extract-cert installed.)
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While at it:
- Turn on hashes verification and add a hash for the Linux kernel.
- Linux kernel needs host-python3; add it.
- Convert to `make savedefconfig' format.
- Fix shellcheck warnings in our post-image script and update
.checkpackageignore.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Dick Olsson <hi@senzilla.io>
Cc: Julien Olivain <ju.o@free.fr>
Reviewed-by: Julien Olivain <ju.o@free.fr>
[Julien: rebased the patch to resolve conflicts with commit
edc0a6b1a "configs: regenerate all defconfigs"]
Signed-off-by: Julien Olivain <ju.o@free.fr>
The patch, following the suggestion expressed in the review [1] for the
stm32f746-disco board support, moves the Linux kernel and the related
device tree to the ext4 rootfs partition. By doing so, the vfat partition,
improperly called u-boot, no longer makes sense and can therefore be
removed. From now on, U-Boot will load the kernel and the device tree
from the ext4 rootfs partition.
[1] https://patchwork.ozlabs.org/project/buildroot/patch/20240822183742.3550055-3-dario.binacchi@amarulasolutions.com/
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The patch, following the suggestion expressed in the review [1] for the
stm32f746-disco board support, moves the Linux kernel and the related
device tree to the ext4 rootfs partition. By doing so, the vfat partition,
improperly called u-boot, no longer makes sense and can therefore be
removed. From now on, U-Boot will load the kernel and the device tree
from the ext4 rootfs partition.
While we're at it, also fix shellcheck warnings in the post-build script.
[1] https://patchwork.ozlabs.org/project/buildroot/patch/20240822183742.3550055-3-dario.binacchi@amarulasolutions.com/
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Update the kernel to the latest 6.6 LTS version
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The commit adds support for STM32F746G-DISCO board. The discovery kit is
a complete demonstration and development platform for STMicroelectronics
Arm Cortex-M7-core-based STM32F746NG.
Board support package includes the following components:
- mainline Linux kernel 5.15.165
- mainline U-Boot 2024.07
- default packages from buildroot
Link: https://www.st.com/en/evaluation-tools/32f746gdiscovery.html
Co-Developed-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
During the hackathon in Vienna, it was decided [0] to stop requiring
annotated defconfig files, and that they should all be regenerated.
This commit does just that.
This is a mechanical change, achieved by running (the defcfg script is
repriducedc at the end of the commit log):
$ for cfg in configs/*_defconfig; do
./defcfg "${cfg##*/}" || break
done
Out of our 302 defconfig files, only 247 needed regenerating, which
means that about 1 in 5 was already not providing the requested
annotations.
To be noted: three defconfig files had duplicate definitions, which this
commit resolves:
nitrogen6sx_defconfig
nitrogen7_defconfig
olimex_a33_olinuxino_defconfig
warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS
[0] https://elinux.org/Buildroot:DeveloperDaysELCE2024#Rules_for_defconfigs
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
====
Below is the script to reproduce the commmit. What it does is regenerate
the configuration first, then applies a patch to update kernel headers
to 3.11, and then recalls the defconfig again, and finally verifies that
the 3.11 headers are not selected (and ignores whether the latest are
selected or not): we want to catch whether defconfig that were using
3.10, currently the latest we support, would stioll get those headers
after we regeerate those.
--->8------>8------>8------>8------>8---
#!/bin/sh
cfg="${1}"
git checkout -- package/linux-headers/Config.in.host toolchain/Config.in
make "${cfg}"
make savedefconfig
patch -p1 <<_EOF_
diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host
index 2ae4077ffe..e669f89267 100644
--- a/package/linux-headers/Config.in.host
+++ b/package/linux-headers/Config.in.host
@@ -129,8 +129,12 @@ choice
If your kernel headers are more recent than the latest version
in the choice, then select the latest version.
+config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11
+ bool "6.11.x or later"
+ select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
+
config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10
- bool "6.10.x or later"
+ bool "6.10.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9
diff --git a/toolchain/Config.in b/toolchain/Config.in
index 6e91ab756c..c2522aca7f 100644
--- a/toolchain/Config.in
+++ b/toolchain/Config.in
@@ -656,6 +656,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
bool
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
+
+config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
+ bool
+ select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
select BR2_TOOLCHAIN_HEADERS_LATEST
# This should be selected by the latest version, above, to indicate that
@@ -669,6 +673,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST
# stops affecting a value on the first matching default.
config BR2_TOOLCHAIN_HEADERS_AT_LEAST
string
+ default "6.11" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
default "6.10" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
default "6.9" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
default "6.8" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_8
_EOF_
make "${cfg}"
git checkout -- package/linux-headers/Config.in.host toolchain/Config.in
diff="$(
diff -I '_6_11\|BR2_TOOLCHAIN_HEADERS_LATEST=y' -du \
<( tail -n +5 .config.old ) \
<( tail -n +5 .config )
)"
if [ "${diff}" ]; then
printf 'Not idempotent for "%s"\n' "${cfg}" >&2
exit 1
fi
---8<------8<------8<------8<------8<---
====
To verify that no other changes are made to the defconfigs that are
risky when the defaults change, we ran the following simple script
(where buildroot-prev is a checkout just before this commit). It shows
that there are many settings removed because they are default, but none
of them run the same risk that the default is going to be changed in the
future.
for i in configs/*_defconfig; do
diff="$(diffconfig ../buildroot-next/$i $i)"
if [ -n "$diff" ]; then
echo "==> $i"
echo "$diff"
echo
fi
done
--->8------>8------>8------>8------>8---
==> configs/aarch64_efi_defconfig
-BR2_TARGET_GRUB2_ARM64_EFI y
==> configs/acmesystems_aria_g25_128mb_defconfig
-BR2_arm926t y
==> configs/acmesystems_aria_g25_256mb_defconfig
-BR2_arm926t y
==> configs/acmesystems_arietta_g25_128mb_defconfig
-BR2_arm926t y
==> configs/acmesystems_arietta_g25_256mb_defconfig
-BR2_arm926t y
==> configs/amarula_vyasa_rk3288_defconfig
-BR2_PACKAGE_HOST_UBOOT_TOOLS y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/armadeus_apf27_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/armadeus_apf28_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/armadeus_apf51_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/aspeed_ast2600evb_defconfig
-BR2_ARM_FPU_VFPV4D16 y
==> configs/asus_tinker-s_rk3288_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/at91sam9260eknf_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9g20dfc_defconfig
-BR2_TARGET_ROOTFS_TAR y
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_TARGET_ROOTFS_UBIFS_LEBSIZE 0x1f800
-BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE 0x800
-BR2_TARGET_ROOTFS_UBI_PEBSIZE 0x20000
-BR2_TARGET_ROOTFS_UBI_SUBSIZE 512
-BR2_arm926t y
==> configs/at91sam9g45m10ek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9rlek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9x5ek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9x5ek_dev_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9x5ek_mmc_defconfig
-BR2_arm926t y
==> configs/at91sam9x5ek_mmc_dev_defconfig
-BR2_arm926t y
==> configs/atmel_sama5d3_xplained_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d3_xplained_dev_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d3xek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d4_xplained_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d4_xplained_dev_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/bananapi_m2_ultra_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/bananapro_defconfig
-BR2_ARM_EABIHF y
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/beaglebone_qt5_defconfig
-BR2_PACKAGE_TI_SGX_KM y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/beagleboneai64_defconfig
-BR2_TARGET_TI_K3_BOOT_FIRMWARE y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT y
==> configs/beelink_gs1_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/canaan_kd233_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/ci20_defconfig
-BR2_KERNEL_HEADERS_AS_KERNEL y
-BR2_PACKAGE_HOST_UBOOT_TOOLS y
-BR2_TARGET_UBOOT_SPL_NAME "spl/u-boot-spl.bin"
==> configs/cubieboard2_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/freescale_imx28evk_defconfig
-BR2_arm926t y
==> configs/friendlyarm_nanopi_r2s_defconfig
-BR2_cortex_a53 y
==> configs/globalscale_espressobin_defconfig
-BR2_cortex_a53 y
==> configs/hifive_unleashed_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_GENERIC_GETTY y
==> configs/imx23evk_defconfig
-BR2_arm926t y
==> configs/imxrt1050-evk_defconfig
-BR2_LINUX_KERNEL_ZIMAGE y
==> configs/khadas_vim3_defconfig
-BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE "khadas-vim3"
==> configs/kontron_bl_imx8mm_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/kontron_pitx_imx8m_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/kontron_smarc_sal28_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/lafrite_defconfig
-BR2_cortex_a53 y
==> configs/lego_ev3_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_arm926t y
==> configs/linksprite_pcduino_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/ls1046a-frwy_defconfig
-BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM "ls1046"
==> configs/mx6cubox_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/nexbox_a95x_defconfig
-BR2_cortex_a53 y
==> configs/nitrogen6sx_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/nitrogen6x_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/nitrogen7_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/nitrogen8m_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/nitrogen8mm_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/nitrogen8mn_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/nitrogen8mp_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/odroidc2_defconfig
-BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY y
==> configs/olimex_a10_olinuxino_lime_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a13_olinuxino_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a20_olinuxino_lime2_defconfig
-BR2_ARM_EABIHF y
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/olimex_a20_olinuxino_lime_defconfig
-BR2_ARM_EABIHF y
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/olimex_a20_olinuxino_micro_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a33_olinuxino_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a64_olinuxino_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/olimex_imx233_olinuxino_defconfig
-BR2_arm926t y
==> configs/openblocks_a6_defconfig
-BR2_arm926t y
==> configs/orangepi_lite2_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_cortex_a53 y
==> configs/orangepi_one_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_one_plus_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_cortex_a53 y
==> configs/orangepi_pc_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_pc_plus_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_r1_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_zero2w_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/orangepi_zero3_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/orangepi_zero_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_zero_plus2_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/orangepi_zero_plus_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/pine64_defconfig
-BR2_cortex_a53 y
==> configs/pine64_sopine_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_cortex_a53 y
==> configs/qemu_aarch64_sbsa_defconfig
-BR2_TARGET_GRUB2_ARM64_EFI y
==> configs/qemu_aarch64_virt_defconfig
-BR2_cortex_a53 y
==> configs/qemu_arm_versatile_defconfig
-BR2_arm926t y
==> configs/qemu_arm_vexpress_defconfig
-BR2_ARM_FPU_VFPV3D16 y
==> configs/qemu_arm_vexpress_tz_defconfig
-BR2_PACKAGE_LIBOPENSSL y
==> configs/qemu_m68k_mcf5208_defconfig
-BR2_LINUX_KERNEL_VMLINUX y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_m68k_q800_defconfig
-BR2_LINUX_KERNEL_VMLINUX y
-BR2_TARGET_GENERIC_GETTY y
-BR2_m68k_68040 y
==> configs/qemu_microblazebe_mmu_defconfig
-BR2_microblaze y
==> configs/qemu_microblazeel_mmu_defconfig
-BR2_microblaze y
==> configs/qemu_mips32r2_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips32r2el_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips32r6_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips32r6el_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64el_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64r6_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64r6el_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_ppc64le_powernv8_defconfig
-BR2_powerpc_power8 y
==> configs/qemu_ppc64le_pseries_defconfig
-BR2_powerpc_power8 y
==> configs/qemu_ppc_bamboo_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_ppc_g3beige_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_ppc_mpc8544ds_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv32_nommu_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv32_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv64_nommu_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_RISCV_64 y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv64_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_RISCV_64 y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_sh4_r2d_defconfig
-BR2_sh4 y
==> configs/qemu_sparc64_sun4u_defconfig
-BR2_sparc_v9 y
==> configs/qemu_sparc_ss10_defconfig
-BR2_sparc_v8 y
==> configs/qemu_x86_defconfig
-BR2_i386 y
==> configs/raspberrypi0_defconfig
-BR2_ARM_EABIHF y
==> configs/raspberrypi0w_defconfig
-BR2_ARM_EABIHF y
==> configs/raspberrypi2_defconfig
-BR2_ARM_EABIHF y
==> configs/raspberrypi3_64_defconfig
-BR2_cortex_a53 y
==> configs/raspberrypi3_qt5we_defconfig
-BR2_PACKAGE_KMOD y
-BR2_PACKAGE_QT5BASE_JPEG y
-BR2_PACKAGE_QT5BASE_PNG y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/raspberrypi_defconfig
-BR2_ARM_EABIHF y
==> configs/riotboard_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/rock64_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/rock_pi_n8_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/rockpro64_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/s6lx9_microboard_defconfig
-BR2_microblaze y
==> configs/sheevaplug_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_NETWORK n
-BR2_arm926t y
==> configs/sipeed_maix_bit_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maix_bit_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/sipeed_maix_dock_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maix_dock_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/sipeed_maix_go_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maix_go_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/sipeed_maixduino_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maixduino_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/snps_archs38_hsdk_defconfig
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/solidrun_clearfog_gt_8k_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n
==> configs/solidrun_macchiatobin_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n
-BR2_TARGET_ROOTFS_TAR y
-BR2_TARGET_UBOOT_USE_DEFCONFIG y
==> configs/spike_riscv64_defconfig
-BR2_RISCV_64 y
==> configs/ts5500_defconfig
-BR2_i386 y
-BR2_x86_i586 y
==> configs/versal_vck190_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/versal_vpk180_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_kria_kd240_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_kria_kr260_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_kria_kv260_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_zcu102_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_zcu104_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_zcu106_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
---8<------8<------8<------8<------8<---
Enable mdev so that coldplug will automatically load kernel modules that
were unavailable before rootfs was mounted.
mdev will also enable hotplug so that kernel modules will be automatically
loaded when a new device is inserted in e.g. USB or PCIe after boot.
Before this change:
$ lsmod | wc -l
0
After this change:
$ lsmod | wc -l
43
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kernel 5.15 fails to build with GCC 13.
Update to kernel 6.6.51 to avoid the build failure.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/7803199854
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following
build warning:
include/image.h:1471:12: fatal error: openssl/evp.h: No such file or directory
1471 | # include <openssl/evp.h>
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/7803199927
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following
build warning:
include/image.h:1471:12: fatal error: openssl/evp.h: No such file or directory
1471 | # include <openssl/evp.h>
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/7803199869
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The initialization script provided by the tinyinit package is the same
as the one contained in board/canaan/k210-soc/rootfs_overlay/sbin/init
except for the Linux logo, which has been removed. The patch reworks
the configurations that use this overlay directory by replacing the
initialization process contained within it with the one provided by
the tinyinit package.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Newer versions of the imx6ulpico board come populated with QCA9377
Wifi chip instad of BRCM4339.
Also install the QCA9377 firmware so that Wifi can work by default
on the newer board revisions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to U-Boot 2024.07 and kernel 6.6.48 versions.
The default U-Boot pico-imx6ul_defconfig causes the board to hang in SPL.
Fix it by chaging it to the more specific U-Boot
pico-pi-imx6ul_defconfig.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to version 2024.07 and kernel to 6.6.46.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The imx8mqevk_defconfig is failing to build the arm-trusted-firmware
package, with the error message:
plat/imx/imx8m/hab.c: In function 'imx_hab_handler':
plat/imx/imx8m/hab.c:65:57: error: array subscript 0 is outside array bounds of 'uint32_t[0]' {aka 'unsigned int[]'} [-Werror=array-bounds=]
65 | #define HAB_RVT_CHECK_TARGET_ARM64 ((unsigned long)*(uint32_t *)(HAB_RVT_BASE + 0x18))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is happening since commit dc0f721 "package/gcc: switch to 13.x
as default".
This commit fixes this build failure by updating the TF-A, U-Boot and
Linux Kernel. Note: this imx8mqevk_defconfig uses the upstream Kernel
(in contrast of the freescale_imx8mqevk_defconfig which is using the NXP
BSP Kernel version).
Also, this new uboot version needs gnutls and openssl, so the
corresponding options are added to the defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7691701411
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The imx8mqevk_defconfig is failing to build the arm-trusted-firmware
package, with the error message:
plat/imx/imx8m/hab.c: In function 'imx_hab_handler':
plat/imx/imx8m/hab.c:65:57: error: array subscript 0 is outside array bounds of 'uint32_t[0]' {aka 'unsigned int[]'} [-Werror=array-bounds=]
65 | #define HAB_RVT_CHECK_TARGET_ARM64 ((unsigned long)*(uint32_t *)(HAB_RVT_BASE + 0x18))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is happening since commit dc0f721 "package/gcc: switch to 13.x
as default".
This commit fixes this build failure by updating the TF-A, U-Boot and
Linux Kernel. Note: this imx8mqevk_defconfig uses the upstream Kernel
(in contrast of the freescale_imx8mqevk_defconfig which is using the NXP
BSP Kernel version).
Also, this new uboot version needs gnutls and openssl, so the
corresponding options are added to the defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7691701411
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
