Release notes:
https://github.com/tianocore/edk2/releases/tag/edk2-stable202405
We can't bump to edk2-stable202408 yet due to a runtime issue while
testing qemu_aarch64_sbsa_defconfig following the switch generic
ArmPsciResetSystemLib [1]
ERROR: sbsa_sip_smc_handler: unhandled SMC (0xc20000ca) (function id: 202)
Qemu 9.0/9.1 is using a slightly older edk2 firmware based on
edk2-stable202405 release [2] that contains a commit [3] fixing a
bootloader crash produced with qemu_aarch64_sbsa_defconfig [4] since
Qemu 9.0.
From [5]:
"The version of the sbsa-ref EDK2 firmware we used to use in this test
had a bug where it might make an unaligned access to the framebuffer,
which causes a guest crash on newer versions of QEMU where we enforce
the architectural requirement that unaligned accesses to Device memory
should take an exception."
This commit [5] is backported to edk2-stable202405.
For the same reason, we have to update edk2-platforms to a specific
version [6]:
"QemuSbsa: enable WriteCombine for the FrameBuffer
QEMU no longer permits misaligned access to device memory, which breaks
QemuVideoDxe on SbsaQemu.
c1d1910be6e04a8b1a73090cf2881fb698947a6e commit in EDK2 fixed it by
enabling WriteCombine for Framebuffer memory. This change enables that
fix."
As a side note, the edk2-non-osi package does not need to be updated, so
it is left untouched.
Finally, this EDK2 version requires a recent Qemu version. The version
included in the reference Docker image (5.2.0) is too old and will not
allow to start this EDK2 version. Therefore, this bump is known to be
incompatible with runtime tests which are using EDK2 on Aarch64
architecture. At the authoring time of this commit, broken tests are:
- tests.boot.test_edk2
- tests.boot.test_grub.TestGrubAArch64EFI
- tests.package.test_fwts
Note that the EDK2/Qemu incompatibility is only affecting Aarch64
tests. Other tests using EDK2 on i386 or x86_64 are not affected.
To prevent this commit introducing broken runtime tests, those have
been disabled in a previous commit.
[1] 2d0668d399
[2] 24a7cd6a7c
[3] c1d1910be6
[4] https://gitlab.com/buildroot.org/buildroot/-/jobs/7764483764
[5] 6c84daac58
[6] 3f08401365
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7764483764
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
[Julien: add comments in commit log]
Signed-off-by: Julien Olivain <ju.o@free.fr>
A new version of U-Boot has been released. Update to this latest version
to pull in the latest features and bug fixes
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The denx.de/wiki/U-Boot link now redirects to docs.u-boot.org/en/latest
Replace the link to the new location for the U-Boot documentation
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 86bb1b236 "boot/grub2: needs host-python3" [1] introduced a
dependency on host-python3.
Since grub does not have any specific requirements on host Python
modules, or recent host Python version, this commit replaces the
host-python3 dependency with BR2_PYTHON3_HOST_DEPENDENCY. This will
skip the host-python3 compilation if a sufficient version (3.4 or
greater at the time of this commit) is already present on host. This
will save build time.
This optimization was suggested by Peter, in [2].
Note 1: this commit was checked to ensure that grub is building with
Python 3.4.
Note 2: BR2_PYTHON3_HOST_DEPENDENCY was introduced in commit b60729784
"support/dependencies: add a check for python3" [3].
[1] 86bb1b2360
[2] https://lists.buildroot.org/pipermail/buildroot/2024-September/763967.html
[3] b60729784a
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the FDPIC ABI is enabled by default in the toolchain, it must be
explicitly disabled when building U-Boot.
Signed-off-by: Ben Wolsieffer <Ben.Wolsieffer@hefring.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OP-TEE OS and TAs can run on RISC-V (64-bit) machines, so allow
optee-os to be compiled for the new architecture.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
[Arnout:
- set CROSS_COMPILE_ta_rv64 even on arm builds;
- ARCH=arm for aarch64.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When the build host does not have a Python interpreter installed,
host-grub2 is failing to configure due to this missing interpreter.
Note that host-grub2 is the first package to fail because it is a
dependency of grub2. The grub2 target package has the same dependency
requirement.
The issue can be quickly reproduced on a host without Python with the
commands:
cat <<EOF >.config
BR2_aarch64=y
BR2_TARGET_GRUB2=y
BR2_TOOLCHAIN_EXTERNAL=y
EOF
make olddefconfig
make grub2
grub2 autotools configure.ac search for a Python interpreter since
upstream commit [1] 8b467844e "python: Use AM_PATH_PYTHON to determine
interpreter for gentpl.py", first included in grub v2.04 released
on 2019-07-04. For reference, grub2 has been updated to that version
in commit [2] ea7ec41c "boot/grub2: bump to verson 2.04".
This commit fixes the issue by adding the host-python3 dependency to
host-grub2 and grub2.
Fixes:
checking for a Python interpreter with version >= 2.6... none
configure: error: no suitable Python interpreter found
[1] https://git.savannah.gnu.org/gitweb/?p=grub.git;a=commitdiff;h=8b467844e11170077c8ca727c39d2bd36eeb5f08
[2] ea7ec41cf6
Reported-by: Vincent Stehlé <vincent.stehle@arm.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Arm Trusted Firmware (TF-A) v2.11 fails to build in some situations
with the error message:
ld: build/qemu/release/bl1/bl1.elf: error: PHDR segment not covered by LOAD segment
This error can be reproduced with the commands:
make qemu_aarch64_ebbr_defconfig
utils/config --set-str BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE v2.11
make olddefconfig
make
This issue was reported in [1].
This error is coming from a check that was made more strict since
binutils ld 2.34. This error message is normally related to dynamic
linker, so it should normally not apply to a package like TF-A.
When BR2_SHARED_LIBS=y (shared libraries only) and BR2_PIC_PIE=y
(Build code with PIC/PIE), the Buildroot toolchain-wrapper will try
to enable position-independent code/executables. See [2]. This
configuration is a common default.
Arm Trusted Firmware (TF-A) build system, on its side, tries to detect
if the toolchain enables PIE automatically. It does so by checking if
--enable-default-pie is in the output of "$(CC) -v". If found, the TF-A
build system tries to disable PIE globally (it can be explicitly
enabled again with the ENABLE_PIE=1 build variable, in some specific
configurations). This detection mechanism is not working with the
Buildroot toolchain wrapper which is enabling PIE silently. See [3].
Commit 1061ed6c "boot/arm-trusted-firmware: add -fno-PIE to CFLAGS"
added the option -fno-PIE in CFLAGS for that reason. See [4].
TF-A >= v2.11 now needs the same treatment for LDFLAGS. This is
because TF-A switched the default linker from "ld" to "gcc", in
upstream commit [5]. This change makes the Buildroot toolchain wrapper
to enable PIE at link, without passing the "--no-dynamic-linker" option
that would normally avoids this ld error.
Also, even if there is no defconfigs using the
BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_VERSION config directive, it is
worth mentioning that the Buildroot TF-A "latest version" was updated
to v2.11 in commit 9c50759cd "boot/arm-trusted-firmware: bump to
v2.11". See [6]. This latest version is the default choice. So
Buildroot is subject to generate this build failure. This can be
reproduced with the commands:
cat <<EOF >.config
BR2_aarch64=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="qemu"
BR2_TOOLCHAIN_EXTERNAL=y
EOF
make olddefconfig
make arm-trusted-firmware
This commit fixes the issue by adding the option "-no-pie" in LDFLAGS.
This will prevent the Buildroot toolchain wrapper to enable PIE, for
versions using "gcc" as a linker. This change should also remain
compatible with older TF-A < 2.11 using "ld" as a linker, since
"-no-pie" is also a valid ld option.
Fixes:
ld: build/qemu/release/bl1/bl1.elf: error: PHDR segment not covered by LOAD segment
[1] https://github.com/TrustedFirmware-A/trusted-firmware-a/issues/26
[2] https://gitlab.com/buildroot.org/buildroot/-/blob/2024.08-rc3/toolchain/toolchain-wrapper.c?ref_type=tags#L403
[3] https://git.trustedfirmware.org/plugins/gitiles/TF-A/trusted-firmware-a.git/+/refs/tags/v2.11.0/Makefile#711
[4] 1061ed6c62
[5] 2f1c5e7eb1%5E%21/
[6] 9c50759cd1
Reported-by: Vincent Stehlé <vincent.stehle@arm.com>
Tested-by: Vincent Stehlé <vincent.stehle@arm.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Converting the pmufw.elf to a binary works with any objcopy, regardless
if it's from the host or cross-compiler. Prefer to use the
$(TARGET_OBJCOPY) as it's always available and reproducible.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building with `make -j` and PER_PACKAGE_DIRECTORIES, a race
condition occurs between xilinx-prebuilt and u-boot, resulting in the
following error.
objcopy -O binary -I elf32-little .../images/pmufw.elf .../images/pmufw.bin
objcopy: '.../images/pmufw.elf': No such file
U-Boot registers a KCONFIG_FIXUP_CMD that uses the pmufw.elf from
xilinx-prebuilt. But KCONFIG_FIXUP_CMDS does not use the normal
DEPENDENCIES, so xilinx-prebuilt is not guaranteed to have run before
fixup.
Instead move the `objcopy` call out to a PRE_BUILD_HOOK so it will run
after xilinx-prebuilt has finished.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Tested-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds license information, and license file hashes for LTS
versions, by using per-version directories.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There is a new lts-v2.10.x branch. Add it to the selection
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
bump the lts-v2.8.x branch to v2.8.20. Our patch still applies.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update trusted-firmware-a to v2.11
The hash of the license file is updated due to this change:
See the original `Linux MIT license`_.
+- Some source files originating from the `Open Profile for DICE`_ project.
+ These files are licensed under the Apache License, Version 2.0, which is a
+ permissive license compatible with BSD-3-Clause. Any contributions to this
+ code must also be made under the terms of `Apache License 2.0`_.
+ These files are:
+
+ - ``include/lib/dice/dice.h``
+
.. _FreeBSD: http://www.freebsd.org
.. _Linux MIT license: https://raw.githubusercontent.com/torvalds/linux/master/LICENSES/preferred/MIT
.. _SCC: http://www.simple-cc.org/
+.. _Open Profile for DICE: https://pigweed.googlesource.com/open-dice/
+.. _Apache License 2.0: https://www.apache.org/licenses/LICENSE-2.0.txt
+
As we only document the main license of TF-A, BSD-3-Clause, this
change has no impact for us.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ARM_TRUSTED_FIRMWARE_SITE is currently pointing to the deprecated
ARM-software github read-only mirror[0] which is no longer publishing
new tags. They do have a newer github mirror under the TrustedFirmware-A
organization[1] which continues to receive tag updates we could use
however because of the way github generates tarballs changing the SITE
to point to TrustedFormware-A changes the pre-calculated hash values
for every version for everyone.
Without much way around changing all hash values if we want these latest
tags, lets drop the github mirrors and move to the official git
source[2] so we can download real tarballs which shouldn't change even
if the ARM_TRUSTED_FIRMWARE_SITE moves again and hopefully preventing
this from ever happening again.
[2] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/
[1] https://github.com/TrustedFirmware-A/trusted-firmware-a
[0] https://github.com/ARM-software/arm-trusted-firmware
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When creating a hardware platform for AMD Versal devices with the AMD Vivado
Design Suite, the resulting XSA file has a file named "psm_fw.elf" included.
This does not match the "psmfw.elf" filename that users will get when building
the boot firmware from the Xilinx GIT repository.
A change request has been submitted to resolve this issue, so that future
AMD Vivado Design Suite versions will generate XSA files including the boot
firmware file named "psmfw.elf" to match the filename that is generated when
building the firmware.
In order to support both current and future versions of AMD Vivado Design
Suite, this patch changes the xilinx-prebuilt package to use the filename
"psm*fw.elf" when obtaining the Versal boot firmware images from a user
generated XSA file.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The following warning occurs from commit "boot/uboot: allow taking the
entire default environment from a text file".
boot/uboot/Config.in:141:warning: config symbol
'BR2_TARGET_UBOOT_DEFAULT_ENV_FILE' uses select, but is not bool or
tristate
Add a hidden 'bool' config so we can enable dependencies.
In addition, the DEFAULT_ENV_FILE works by setting Kconfig options,
therefore we also need to depend on
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default U-Boot builds a default environment from its own configuration
and a board-specific set of variables. However it also allows to bypass
this entirely and define the entire default environment from a text file.
Expose this feature to Buildroot. This allows to have a file e.g. in
board/.../uboot.env which contains an easy to maintain text file with the
wanted default environment, without patching the U-Boot source code.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Some specific versions of OP-TEE need cmake on the host to build the scmi
firmware, like the newly release STMicroelectronics 3.19.0-stm32mp-r2
version.
To allow building such OP-TEE OS versions, this commit adds the option
BR2_TARGET_OPTEE_OS_NEEDS_CMAKE which when enabled ensures that host-cmake
is built before OP-TEE OS.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[Arnout: use BR2_CMAKE_HOST_DEPENDENCY]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The xilinx-prebuilt package only supports development boards that Xilinx
has published firmware for. Custom designs based on the Xilinx platform
must generate their own firmware using the AMD Vivado Design Suite.
Vivado produces an XSA file, which is a Zip file containing all the
firmware needed by xilinx-prebuilt. We extend xilinx-prebuilt to
download custom XSA files and extract their contents.
Reviewed-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
[Romain: add a comment about the custom PSMFW file name.]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The beaglev-ddrinit was meant for the BeagleV-Starlight
board (beaglev_defconfig) but the support was removed.
Remove beaglev-ddrinit too.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The beaglev-secondboot was meant for the BeagleV-Starlight
board (beaglev_defconfig) but the support was removed.
Remove beaglev-secondboot too.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ti-k3-r5-loader is just a U-Boot SPL running on the R5 core on TI's K3
processors, so it makes sense to just share the downloads with U-Boot.
With commit ebe238f2b5 (package/pkg-download: use _DL_SUBDIR as root
dir of generated archives), the root of the generated archive will also
be based on _DL_SUBDIR, but the name of the archive, _SOURCE, is still
based on the current package unless explicitly set. For ti-k3-r5-loader,
that would create an archive which fiename does not match its root
directory; although Buildroot does not care (we --strip-components=1
when extracting), this would be a bit surprising to anyone manually
extrating the archive, as it diverges from the usual expectations.
Do like we do for linux-headers, and force the ti-k3-r4-loader archive
filename to be u-boot-VERSION.tar.gz
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Bryan Brattlof <bb@ti.com>
Cc: Xuanhao Shi <X15000177@gmail.com>
Cc: Paresh Bhagat <p-bhagat@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Add missing stdio.h include. Without this includes, the build fails
with the following error under GCC 14.x:
../../../com32/lib/syslinux/debug.c: In function ‘syslinux_debug’:
../../../com32/lib/syslinux/debug.c:91:5: error: implicit declaration of function ‘printf’ [-Wimplicit-function-declaration]
91 | printf("Dynamic debug unavailable\n");
Signed-off-by: Lance Fredrickson <lancethepants@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Correct the spelling of the word 'there' in the comment.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This patch reduces the xilinx-prebuilt package to a single install variable
that changes depending on device family variant.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the syslinux patches to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This patch removes the package/versal-firmware as this package is replaced
by the boot/xilinx-prebuilt target boot firmware package.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Brandon Maier <brandon.maier@collins.com>
[yann.morin.1998@free.fr: handle legacy]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The new BR2_TARGET_UBOOT_ZYNQMP_PMUFW_PREBUILT option will enable u-boot to
use the xilinx-prebuilt package for downloading a pmufw.elf that gets included
in the generated boot.bin.
If the BR2_TARGET_UBOOT_ZYNQMP_PMUFW_PREBUILT option is enabled, then the
BR2_TARGET_UBOOT_ZYNQMP_PMUFW config for downloading a prebuilt pmufw will
be ignored.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Brandon Maier <brandon.maier@collins.com>
[yann.morin.1998@free.fr:
- add 'custom' to prompt for BR2_TARGET_UBOOT_ZYNQMP_PMUFW
- fix checkpackage
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch add a new boot package for downloading prebuilt firmware for Xilinx
versal and zynqmp evaluation boards.
It solves the problem of being able to verify the hash when downloading a
prebuilt zynqmp pmufw.elf binary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Brandon Maier <brandon.maier@collins.com>
[yann.morin.1998@free.fr:
- move the hash file to the package dir, not the board dir
- move board name after familly choice
- add default board name for each family
- qstrip the Kconfig strings before use
- introduce XILINX_PREBUILT_BOARD_DIR to simplify paths
- explain the *.pdi glob
- simplify non-versal install
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
At91dataflashboot is an ancient (2006) fork of at91bootstrap1 specifically
for the Atmel/Microchip AT45 series (dataflash) of serial flashes.
The package hasn't seen any meaningful updates since, is not used by any
defconfigs and at91bootstrap3 nowadays has AT45 support - So remove the
package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The upstream is no longer available, no defconfigs use it and the package
has been replaced 12 years ago with at91bootstrap3 with commit ca0d69c61c
(at91bootstrap3: new package), so remove it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Replace all git and svn packages archive names in hash files:
$ sed -r -i -e 's/-br2/-git3/; s/-br3/-svn4/' $(
git grep -l -E -- '-br2|-br3' '*.hash'
)
$ sed -r -i -e 's/(\.tar\.gz)$/-go1\1/' $(
git grep -l -E '\$\(eval \$\((host-)?golang-package\)\)' '*.mk' \
|sed -r -e 's/\.mk$/.hash/' \
|sort -u
)
$ sed -r -i -e 's/(\.tar\.gz)$/-cargo1\1/' $(
git grep -l -E '\$\(eval \$\((host-)?cargo-package\)\)' '*.mk' \
|sed -r -e 's/\.mk$/.hash/' \
|sort -u
)
Then a bit of make source (based on: git diff --name-only), a lot of
sweat, and carefully checking the new archives to verify that only
modes have changed...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The version suffix for the git-generated archives has changed, so update
the filenames accordingly in the hash files. The content of the archives
has not changed, though.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The 09.02.00.009 release of ti-linux-firmware has the latest updates to
TI's TIFS, DM and DMSC firmware needed for the K3 generation of
processors. Update to pull in these latest updates.
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Tested-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The ti-k3-r5-loader is just U-Boot with a different defconfig compiled
for the 32b MCU cores needed for TI's K3 generation of SoCs. Update to
match the U-Boot version
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
