Traditional VT-10x terminals (and their emulators) [0] have a "magic
margins" feature that enables the last character position to be updated
without scrolling the screen: whenever a character is printed on the
last column, the cursor stays over the character, instead of moving to
the next line.
The Busybox shell, ash, attempts to defeat this feature by printing
CR,LF right after echoing a character to the last column.[1] This
doesn't play well with emulator.py. The run() method of the Emulator
class captures the output of the emulated system and assumes the first
line it reads is the echo of the command, and all subsequent lines are
the command's output. If the line made by the command + shell prompt is
longer than 80 characters, then it is echoed as two or more lines, and
all but the first one are mistaken for the command's output.
We fix this by telling the emulated system that we are using an
ultra-wide terminal with 29999 columns. Larger values would be ignored
and replaced by the default, namely 80 columns.[2]
[0] https://vt100.net/docs/vt100-ug/chapter3.html - DECAWM
[1] https://git.busybox.net/busybox/tree/libbb/lineedit.c?h=1_34_0#n412
[2] https://git.busybox.net/busybox/tree/libbb/xfuncs.c?h=1_34_0#n258
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Co-authored-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit eb3ee3078a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Compiling on Ubuntu 20.04 generates this:
./util.c: In function ‘file_write_dep’
./util.c:54:18: warning: ‘..config.tmp’ directive writing 12 bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
54 | sprintf(buf, "%s..config.tmp", dir);
| ^~~~~~~~~~~~
./util.c:54:2: note: ‘sprintf’ output between 13 and 4109 bytes into a destination of size 4097
54 | sprintf(buf, "%s..config.tmp", dir);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and similar warnings on confdata.c, lines 778, 989, 995, 1000, 1007,
1040, 1046 and 1054. Avoid the warnings by enlarging the destination
buffer of fprintf().
Normally, we want changes to kconfig to be reflected by patches in
support/kconfig/patches. This makes it easier to resync with upstream
kconfig. However, in this case, everything that is changed here is
already changed completely (and differently) upstream, so there is no
added value in keeping the patch.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 324612d68e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When booting under EFI, grub2 will output a nice and shiny boot menu,
using extended ASCII characters (in the [0x80..0xFF] range), namely
CP437 [0], on the assumption that the VGA BIOS is a real one and has the
corresponding (and only!) font, as is the case on real hardware.
However, when run in our runtime test infrastructure, this triggers the
infamous python UnicodeDecodeError exception:
Traceback (most recent call last):
[...]
emulator.login()
File "[...]/buildroot/support/testing/infra/emulator.py", line 89, in login
index = self.qemu.expect(["buildroot login:", pexpect.TIMEOUT],
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 340, in expect
return self.expect_list(compiled_pattern_list,
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 369, in expect_list
return exp.expect_loop(timeout)
File "/usr/lib/python3/dist-packages/pexpect/expect.py", line 111, in expect_loop
incoming = spawn.read_nonblocking(spawn.maxread, timeout)
File "/usr/lib/python3/dist-packages/pexpect/pty_spawn.py", line 485, in read_nonblocking
return super(spawn, self).read_nonblocking(size)
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 178, in read_nonblocking
s = self._decoder.decode(s, final=False)
File "/usr/lib/python3.8/codecs.py", line 322, in decode
(result, consumed) = self._buffer_decode(data, self.errors, final)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xda in position 0: invalid continuation byte
Grub2 is not wrong in emitting those chars, and basically we should not
expect the packages we test to always emit correct UTF-8 sequences; at
the very least, this should not cause the test infra to fail.
We fix that by telling pexpect.spawn to "fix" such invalid sequences by
replacing them with the suitable Unicode character, U+FFFD REPLACEMENT
CHARACTER.
[0] https://en.wikipedia.org/wiki/Code_page_437
[1] https://docs.python.org/3/library/codecs.html#error-handlers
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- don't change encoding, use codec_errors
- rewrite commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d6d7cbb8e0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To avoid spending some time to build the x86_64 toolchain (~20min),
switch to corei7 cpu (Nahalem) and use the prebuilt Bootlin toolchain.
We have to use the "stable" Bootlin toolchain to use the same kernel version
for the toolchain kernel headers and the running kernel.
With the "bleeding-edge" toolchain we have the "kernel too old" issue
(running kernel 4.19 vs kernel headers 5.4)
Runtime tested locally.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 521b6f8550)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch from the Buildroot internal toolchain for armv5 to
the prebuilt Bootlin external toolchain.
The test doesn't require to build a toolchain, there was
no prebuilt glibc toolchain recent enough at the time this
test has been introduced.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 184d20404e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This test already use builtin kernel provided by the testsuite infra:
self.emulator.boot(arch="armv7",
kernel="builtin",
options=["-initrd", img])
But a second kernel is build from the its defconfig. This second kernel
is not used by the test.
The TestRust (using BR2_PACKAGE_HOST_RUST=y) is really long to build,
save some cpu time by removing the kernel build.
This unused kernel (based on 4.11.3 release) doesn't even build with
host gcc >= 10.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f6d438d59f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel 4.19.79 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
The issue was fixed in 4.19.114 [2]
Bump to the latest 4.19.x version.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
[2] http://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/?id=621f2ded601546119fabccd1651b1ae29d26cd38
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 883d5a2f3d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel 5.5.7 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
But we can't just update this test to the next linux kernel LTS 5.10.y since
the minimum gcc version has been updated to gcc 4.9 since 5.8 kernel [2]
and the Sourcery CodeBench ARM 2014.05 is used (gcc 4.8 based).
Enable arm cortex A9 and VFP support to switch to the ARM arm prebuilt
toolchain (the Bootlin toolchain could be used).
While at it use the prebuilt buildin kernel for the vexpress target
recently updated to 5.10.7.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1564202094
[1] https://gcc.gnu.org/gcc-10/porting_to.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6ec4476ac82512f09c94aff5972654b70f3772b2
[3] 3cf2782906
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e0ad7c6411)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel 4.16.7 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 73278c8a70)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel 4.16.7 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e0a64dfc0e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel 4.11.3 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 69de111c46)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel 4.11.3 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 322b40405e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version bump is needed to pass the ATF test with
hardening option enabled (-fstack-protector-strong)
With the version v2.2, ATF fail due to undefined references:
./build/juno/release/bl2u/arm_tzc400.o: In function `arm_tzc400_setup':
arm_tzc400.c:(.text.arm_tzc400_setup+0x10): undefined reference to `__stack_chk_guard'
arm_tzc400.c:(.text.arm_tzc400_setup+0x18): undefined reference to `__stack_chk_guard'
arm_tzc400.c:(.text.arm_tzc400_setup+0xb8): undefined reference to `__stack_chk_guard'
arm_tzc400.c:(.text.arm_tzc400_setup+0xcc): undefined reference to `__stack_chk_fail'
Since commit ccac9a5bbb, Buildroot no
longer forces ENABLE_STACK_PROTECTOR. However, we rely on the ATF build
system to handle it correctly, and this wasn't the case in v2.2.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1524842591
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e5494f1fac)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc 10.x is now used by default but the kernel 4.19 used by
test_docker_compose doesn't build with it.
Bump the kernel to 4.19.204 release that contains a lot of
fixes for newer gcc.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5d60e07e27)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 2eaa6d0f36 (boot/uboot: fix uboot building host tools on x86
architecture) added use of $(PKG_CONFIG_HOST_BINARY), but forgot to add
the corresponding build-ordr dependency.
Add this missing depenency now.
Additionally, the associated test had an explicit host pkgconf enbled in
its configuration. This is superfluous now that uboot properly depends
on host-pkgconf, so drop that from the test.
Note: it hapenned to work, because host-pkgconf, when explicitly enabled
in the configuration, and without per-package directories, would build
before uboot and thus be available. This would fail with PPD, though,
and thus would break for TLPB.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d0edfec1e2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The make all command run the tools/makefile on the process.
This makefile use "pkg-config" command to support static link.
The issue is the use of pkg-config configured for crosscompiling
to build binaries tools for host architecture.
To fix it, I add pkg-config environment variable to configure it for host.
Add a test to avoid future regress on the build of U-boot.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- fix mixed space-TAB indentation
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2eaa6d0f36)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- If a package doesn't have any versioning, ignore and state that
- If a package is virtual, CVE=ignore and CPE state virtual
- For any of these NA cases, don't provide search link and color box
green
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
has_valid_infra() is incorrectly named; it probably should be named
is_actual_package(), and has_valid_infra() would be changed to
actually represent having an actual infra.
This resolves packages reporting as having no valid package infra and
cleans up reporting cases of CPE and CVEs where there isn't a valid version
or package definition outside Buildroot
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently a verified CPE reports the following if versions are not found
cpe:2.3🅰️qemu:qemu:5.2.0:*:*:*:*:*:*:*
CPE identifier unknown in CPE database (Search)
This patch clarifies the report to state the 'version' is unknown instead
of the 'identifier'.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since [1], PIC/PIE is enabled by default but the TestRelroPartial
test expect implicitely PIC/PIE being disabled.
Disable PIC/PIE from the config fragment provided by
TestRelroPartial.
[1] 810ba387be
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1255661757
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
From [1]
"Xorg does not implement real dynamic linking and requires that its
modules get loaded in the right order."
From /var/log/Xorg.0.0.log:
(II) LoadModule: "modesetting"
(II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
(EE) Failed to load /usr/lib/xorg/modules/drivers/modesetting_drv.so: /usr/lib/xorg/modules/drivers/modesetting_drv.so: undefined symbol: shadowRemove
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1255661899
[1] https://forums.gentoo.org/viewtopic-p-8245578.html#8245578
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the mesa3d bump to version 21.0.3 [1], the
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST option is not supported anymore
since the mesa DRI swrast driver has been removed upstream
So, switch to Gallium swrast.
[1]15a2f9b819806d38a7d8172a20f80130b1d60e63
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When doing analysis it is helpful to be able to view what CVE have
been patched / diagnosed to not apply to Buildroot. This exposes
that list to the reporting and prevents a step where you have to
dig into the .mk's of a pkg to check for sure what has been
ignored.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[yann.morin.1998@free.fr: only set background if there are ignored CVEs]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For cases of a CPE having a unknown version or when there hasn't
been a CPE verified, proposed a search criteria to help the
user research an update.
(libcurl has NIST dict entries but not this version)
cpe:2.3🅰️haxx:libcurl:7.76.1:*:*:*:*:*:*:*
CPE identifier unknown in CPE database (Search)
(jitterentropy-library package doesn't have any NIST dict entries)
no verified CPE identifier (Search)
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[yann.morin.1998@free.fr: fix flake8 issues]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This script queries the list of CPE IDs for the packages of the
current configuration (based on the "make show-info" output), and:
- for CPE IDs that do not have any matching entry in the CPE
database, it emits a warning
- for CPE IDs that do have a matching entry, but not with the same
version, it generates a snippet of XML that can be used to propose
an updated version to NIST.
Ref: NIST has a group email (cpe_dictionary@nist.gov) used to
recieve these version update and new entry xml files. They do
process the XML and provide feedback. In some cases they will
propose back something different where the vendor or version is
slightly different.
Limitations
- Currently any use of non-number version identifiers isn't
supported by NIST as they use ranges to determine impact
of a CVE
- Any Linux version from a non-upstream is also not supported
without manually adjusting the information as the custom
kernel will more then likely not match the upstream version
used in the dictionary
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
[yann.morin.1998@free.fr:
- codestyles as spotted by Arnout
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Extend docker_compose_test() to expose /bin on the host to the container
through a volume mount and verify that /bin/busybox can be downloaded and
contains the right data.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Extend docker_test() to expose a random (8888) port to verify that doesn't
fail, and extend the docker-compose test to run the busybox httpd in the
background, expose that as port 80 and verify that /etc/resolv.conf could be
fetched by wget.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The python2 support has been removed since the python-colorzero bump version to 2.0.
[1] 73bf3292e1
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The python2 support has been removed since the python-colorzero bump version to 2.0.
Remove the gpiozero test with python2
[1] 73bf3292e1
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 76b4f9e9b6)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Create a new user 'sudotest' to validate that sudo really works (i.e.
properly has setuid).
Creating the user and adding it to sudoers is done at runtime, otherwise
we'd need to add extra files to the config which complicates things a
little bit.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kernel 4.16.7 is old enough to produce the "multiple definition of `yylloc'"
error which is fixed in newer versions.
Bump the test kernel version from 4.16.7 to 5.10.34 to prevent this error wwhen
building the test image.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Test that the TAICLOCK and TCP servers are working.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: indent config lines more]
Test that s6-rc service database compilation is working.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: indent config lines more]
Test that a few basis utilities are working.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: indent config lines more]
Test that directory scanning and supervision is working.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: properly indent, and use textwrap to dedent again.]
Test that the interpreter can run a basic command.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: indent config lines more]
Commit 54d3d94b6e broke the 'hg' download
method, in a similar way as it broke the 'git' download method (later fixed
with commit b70ce56651), by introducing extra
output on stdout in a case where the output is redirected.
In the case of 'hg', the 'hg archive' step uses shell redirection rather
than directly letting hg write the output file, since commit
76b51f90c0.
As a result, the extra print added by the _hg function is prepended to the
actual archive, causing an invalid archive.
Fix by using the _plain_hg function instead. The disadvantage is that the
command for 'hg archive' is no longer printed.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ijson < 2.5 (as available in Debian 10) use the slow python backend by
default instead of the most efficient one available like modern ijson
versions, significantly slowing down cve checking. E.G.:
time ./support/scripts/pkg-stats --nvd-path ~/.nvd -p avahi --html foobar.html
Goes from
174,44s user 2,11s system 99% cpu 2:58,04 total
To
93,53s user 2,00s system 98% cpu 1:36,65 total
E.G. almost 2x as fast.
As a workaround, detect when the python backend is used and try to use a
more efficient one instead. Use the yajl2_cffi backend as recommended by
upstream, as it is most likely to work, and print a warning (and continue)
if we fail to load it.
The detection is slightly complicated by the fact that ijson.backends used
to be a reference to a backend module, but is nowadays a string (without the
ijson.backends prefix).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
OpenZFS is an advanced file system and volume manager which was originally
developed for Solaris and is now maintained by the OpenZFS community. This
repository contains the code for running OpenZFS on Linux and FreeBSD.
http://zfsonlinux.org/
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
[me:
- fix test case on how to use a pre-built toolchain
- reorder the test case config
- add test case with glibc
- drop superflous test timeout override
- only select libtirpc when C library lacks native RPC
- drop unused ZFS_MODULES variable
- drop ZFS_CPE_ID_PREFIX and ZFS_AUTORECONF_OPTS which are defaults
- drop NLS options, already set in a generic manner
- drop incomplete/improper sysvinit support
- some cosmetics
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bb10b0dfe6)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
