mirrors/buildroot
0
0
Fork 0
mirror of https://git.busybox.net/buildroot.git synced 2024-11-23 13:33:28 +08:00
Code Issues Packages Projects Releases Wiki Activity

board: Add FriendlyARM Nanopi NEO Plus2 support

Browse Source 
board with below features:
- U-Boot 2019.01
- Linux 5.0
- Default packages from buildroot

Signed-off-by: Aussedat Louis <aussedat.louis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit is contained in:
Aussedat Louis 2019-10-17 22:39:47 +02:00 committed by Arnout Vandecappelle (Essensium/Mind)
parent 5db9d1e92f
commit 34deac05a5
8 changed files with 213 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.gitlab-ci.yml
View File

@ -185,6 +185,7 @@ freescale_t1040d4rdb_defconfig: { extends: .defconfig }
freescale_t2080_qds_rdb_defconfig: { extends: .defconfig }
friendlyarm_nanopi_a64_defconfig: { extends: .defconfig }
friendlyarm_nanopi_neo2_defconfig: { extends: .defconfig }
friendlyarm_nanopi_neo_plus2_defconfig: { extends: .defconfig }
galileo_defconfig: { extends: .defconfig }
grinn_chiliboard_defconfig: { extends: .defconfig }
grinn_liteboard_defconfig: { extends: .defconfig }

4
DEVELOPERS
View File

@ -2512,3 +2512,7 @@ F: package/qjson/
F: package/quazip/
F: package/shapelib/
F: package/tinc/
N: Aussedat Louis <aussedat.louis@gmail.com>
F: board/friendlyarm/nanopi-neo-plus2/
F: configs/friendlyarm_nanopi_neo_plus2_defconfig

6
board/friendlyarm/nanopi-neo-plus2/boot.cmd Normal file
View File

@ -0,0 +1,6 @@
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
fatload mmc 0 $kernel_addr_r Image
fatload mmc 0 $fdt_addr_r sun50i-h5-nanopi-neo-plus2.dtb
booti $kernel_addr_r - $fdt_addr_r

39
board/friendlyarm/nanopi-neo-plus2/genimage.cfg Normal file
View File

@ -0,0 +1,39 @@
image boot.vfat {
vfat {
files = {
"Image",
"sun50i-h5-nanopi-neo-plus2.dtb",
"boot.scr"
}
}
size = 64M
}
image sdcard.img {
hdimage {
}
partition spl {
in-partition-table = "no"
image = "sunxi-spl.bin"
offset = 8192
}
partition u-boot {
in-partition-table = "no"
image = "u-boot.itb"
offset = 40K
size = 1M # 1MB - 40K
}
partition boot {
partition-type = 0xC
bootable = "true"
image = "boot.vfat"
}
partition rootfs {
partition-type = 0x83
image = "rootfs.ext4"
}
}

10
board/friendlyarm/nanopi-neo-plus2/linux-extras.config Normal file
View File

@ -0,0 +1,10 @@
# wireless core
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_CFG80211_WEXT=y
# wireless drivers
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_BRCMFMAC=m

37
board/friendlyarm/nanopi-neo-plus2/readme.txt Normal file
View File

@ -0,0 +1,37 @@
Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the Nanopi NEO Plus2. With the current configuration
it will bring-up the board, and allow access through the serial console.
Nanopi NEO2 link:
http://nanopi.io/nanopi-neo-plus2.html
Wiki link:
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2
This configuration uses U-Boot mainline and kernel mainline.
How to build
============
$ make friendlyarm_nanopi_neo_plus2_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync
Insert the micro SDcard in your Nanopi NEO Plus2 and power it up. The console
is on the serial line, 115200 8N1.

53
board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt Normal file
View File

@ -0,0 +1,53 @@
#AP6212_NVRAM_V1.0.1_20160606
# 2.4 GHz, 20 MHz BW mode
# The following parameter values are just placeholders, need to be updated.
manfid=0x2d0
prodid=0x0726
vendid=0x14e4
devid=0x43e2
boardtype=0x0726
boardrev=0x1101
boardnum=22
macaddr=00:90:4c:c5:12:38
sromrev=11
boardflags=0x00404201
xtalfreq=26000
nocrc=1
ag0=255
aa2g=1
ccode=ALL
pa0itssit=0x20
extpagain2g=0
#PA parameters for 2.4GHz, measured at CHIP OUTPUT
pa2ga0=-168,7161,-820
AvVmid_c0=0x0,0xc8
cckpwroffset0=5
# PPR params
maxp2ga0=90
txpwrbckof=6
cckbw202gpo=0x5555
legofdmbw202gpo=0x77777777
mcsbw202gpo=0xaaaaaaaa
# OFDM IIR :
ofdmdigfilttype=7
# PAPD mode:
papdmode=2
il0macaddr=00:90:4c:c5:12:38
wl0id=0x431b
#OOB parameters
hostwake=0x40
hostrdy=0x41
usbrdy=0x03
usbrdydelay=100
deadman_to=0xffffffff
# muxenab: 0x1 for UART enable, 0x10 for Host awake
muxenab=0x10
# CLDO PWM voltage settings - 0x4 - 1.1 volt
#cldo_pwm=0x4
glitch_based_crsmin=1

63
configs/friendlyarm_nanopi_neo_plus2_defconfig Normal file
View File

@ -0,0 +1,63 @@
BR2_aarch64=y
BR2_cortex_a53=y
BR2_ARM_FPU_VFPV4=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
BR2_ROOTFS_OVERLAY="board/friendlyarm/nanopi-neo-plus2/rootfs_overlay"
# Firmware
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
R2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
# Bootloader
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo_plus2"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
BR2_TARGET_UBOOT_BOOT_SCRIPT=y
BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-neo-plus2/boot.cmd"
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-nanopi-neo-plus2"
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/friendlyarm/nanopi-neo-plus2/linux-extras.config"
# Filesystem
BR2_TARGET_GENERIC_ISSUE="Welcome to FriendlyARM Nanopi NEO Plus2"
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo-plus2/genimage.cfg"
# wireless firmware
BR2_PACKAGE_LINUX_FIRMWARE=y
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
# wireless tools
BR2_PACKAGE_IW=y
BR2_PACKAGE_WIRELESS_TOOLS=y
BR2_PACKAGE_WIRELESS_TOOLS_LIB=y
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
BR2_PACKAGE_WPA_SUPPLICANT_CLI=y