diff --git a/board/qemu/powerpc-g3beige/linux-2.6.36.config b/board/qemu/powerpc-g3beige/linux-2.6.36.config new file mode 100644 index 0000000000..098dae30ac --- /dev/null +++ b/board/qemu/powerpc-g3beige/linux-2.6.36.config @@ -0,0 +1,86 @@ +CONFIG_ALTIVEC=y +CONFIG_EXPERIMENTAL=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +CONFIG_LBDAF=y +CONFIG_PPC_PMAC=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y +CONFIG_PPC601_SYNC_FIX=y +CONFIG_HIGHMEM=y +CONFIG_NO_HZ=y +CONFIG_BINFMT_ELF=y +CONFIG_PROC_DEVICETREE=y +CONFIG_PM=y +CONFIG_SECCOMP=y +CONFIG_PCCARD=y +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_YENTA=y +CONFIG_ADVANCED_OPTIONS=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_INET_LRO=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_IDE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_PROC_FS=y +CONFIG_BLK_DEV_CMD64X=y +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_IEEE1394=y +CONFIG_IEEE1394_OHCI1394=y +CONFIG_IEEE1394_ETH1394=y +CONFIG_IEEE1394_RAWIO=y +CONFIG_IEEE1394_VIDEO1394=y +CONFIG_IEEE1394_DV1394=y +CONFIG_MACINTOSH_DRIVERS=y +CONFIG_ADB=y +CONFIG_ADB_CUDA=y +CONFIG_ADB_PMU=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_MACE=y +CONFIG_BMAC=y +CONFIG_HAPPYMEAL=y +CONFIG_SUNGEM=y +CONFIG_CASSINI=y +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +CONFIG_NE2K_PCI=y +CONFIG_8139CP=y +CONFIG_8139TOO=y +CONFIG_8139TOO_PIO=y +CONFIG_SERIO=y +CONFIG_SERIAL_PMACZILOG=y +CONFIG_SERIAL_PMACZILOG_TTYS=y +CONFIG_SERIAL_PMACZILOG_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_SSB=y +CONFIG_SSB_PCIHOST=y +CONFIG_SSB_PCMCIAHOST=y +CONFIG_SSB_DRIVER_PCICORE=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_MISC_FILESYSTEMS=y +CONFIG_SQUASHFS=y +CONFIG_LIBCRC32C=y +CONFIG_BOOTX_TEXT=y +CONFIG_CRYPTO_HW=y diff --git a/board/qemu/powerpc-g3beige/readme.txt b/board/qemu/powerpc-g3beige/readme.txt new file mode 100644 index 0000000000..1006af9aac --- /dev/null +++ b/board/qemu/powerpc-g3beige/readme.txt @@ -0,0 +1,6 @@ +Run the emulation with: + + qemu-system-ppc -M g3beige -kernel vmlinux -hda rootfs.ext2 -append "console=ttyS0 root=/dev/hdc" -serial stdio + +The login prompt will appear in the terminal that started Qemu. The +graphical window is the framebuffer. diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig new file mode 100644 index 0000000000..8b9212dda4 --- /dev/null +++ b/configs/qemu_ppc_g3beige_defconfig @@ -0,0 +1,15 @@ +# Architecture +BR2_powerpc=y +BR2_powerpc_440fp=y + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="2.6.36" +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-2.6.36.config" +BR2_LINUX_KERNEL_VMLINUX=y + +# Serial port config +BR2_TARGET_GENERIC_GETTY=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"