mirrors/buildroot
0
0
Fork 0
mirror of https://git.busybox.net/buildroot.git synced 2024-11-30 08:53:29 +08:00
Code Issues Packages Projects Releases Wiki Activity
ed590a22e2
buildroot/configs/minnowboard_max_defconfig

23 lines
782 B
Plaintext
Raw Normal View History

board: add support for Minnowboard MAX Very similar to the older Minnowboard, except that it works with mainline Linux, uses 64bit firmware and a realtek NIC needing firmware. The Linux configuration is based on the configuration fragment on elinux: http://elinux.org/Minnowboard:MinnowMaxLinuxKernel Many thanks to Circuitco for sponsoring a board. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-11-03 04:59:47 +08:00
BR2_x86_64=y
minnowboard-max: defconfigs: use silvermont x86 variant As that is the CPU core in the E38xx Atoms used on the Minnowboard max. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-01-15 05:01:15 +08:00
BR2_x86_silvermont=y
configs: regenerate all defconfigs During the hackathon in Vienna, it was decided [0] to stop requiring annotated defconfig files, and that they should all be regenerated. This commit does just that. This is a mechanical change, achieved by running (the defcfg script is repriducedc at the end of the commit log): $ for cfg in configs/*_defconfig; do ./defcfg "${cfg##*/}" || break done Out of our 302 defconfig files, only 247 needed regenerating, which means that about 1 in 5 was already not providing the requested annotations. To be noted: three defconfig files had duplicate definitions, which this commit resolves: nitrogen6sx_defconfig nitrogen7_defconfig olimex_a33_olinuxino_defconfig warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS [0] https://elinux.org/Buildroot:DeveloperDaysELCE2024#Rules_for_defconfigs Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr> Cc: Edgar Bonet <bonet@grenoble.cnrs.fr> Signed-off-by: Arnout Vandecappelle <arnout@mind.be> ==== Below is the script to reproduce the commmit. What it does is regenerate the configuration first, then applies a patch to update kernel headers to 3.11, and then recalls the defconfig again, and finally verifies that the 3.11 headers are not selected (and ignores whether the latest are selected or not): we want to catch whether defconfig that were using 3.10, currently the latest we support, would stioll get those headers after we regeerate those. --->8------>8------>8------>8------>8--- #!/bin/sh cfg="${1}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in make "${cfg}" make savedefconfig patch -p1 <<_EOF_ diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 2ae4077ffe..e669f89267 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -129,8 +129,12 @@ choice If your kernel headers are more recent than the latest version in the choice, then select the latest version. +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11 + bool "6.11.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10 - bool "6.10.x or later" + bool "6.10.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9 diff --git a/toolchain/Config.in b/toolchain/Config.in index 6e91ab756c..c2522aca7f 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -656,6 +656,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 bool select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 + +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 select BR2_TOOLCHAIN_HEADERS_LATEST # This should be selected by the latest version, above, to indicate that @@ -669,6 +673,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "6.11" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 default "6.10" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 default "6.9" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 default "6.8" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_8 _EOF_ make "${cfg}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in diff="$( diff -I '_6_11\|BR2_TOOLCHAIN_HEADERS_LATEST=y' -du \ <( tail -n +5 .config.old ) \ <( tail -n +5 .config ) )" if [ "${diff}" ]; then printf 'Not idempotent for "%s"\n' "${cfg}" >&2 exit 1 fi ---8<------8<------8<------8<------8<--- ==== To verify that no other changes are made to the defconfigs that are risky when the defaults change, we ran the following simple script (where buildroot-prev is a checkout just before this commit). It shows that there are many settings removed because they are default, but none of them run the same risk that the default is going to be changed in the future. for i in configs/*_defconfig; do diff="$(diffconfig ../buildroot-next/$i $i)" if [ -n "$diff" ]; then echo "==> $i" echo "$diff" echo fi done --->8------>8------>8------>8------>8--- ==> configs/aarch64_efi_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/acmesystems_aria_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_aria_g25_256mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_256mb_defconfig -BR2_arm926t y ==> configs/amarula_vyasa_rk3288_defconfig -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/armadeus_apf27_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf28_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf51_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/aspeed_ast2600evb_defconfig -BR2_ARM_FPU_VFPV4D16 y ==> configs/asus_tinker-s_rk3288_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/at91sam9260eknf_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9g20dfc_defconfig -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_ROOTFS_UBIFS y -BR2_TARGET_ROOTFS_UBIFS_LEBSIZE 0x1f800 -BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE 0x800 -BR2_TARGET_ROOTFS_UBI_PEBSIZE 0x20000 -BR2_TARGET_ROOTFS_UBI_SUBSIZE 512 -BR2_arm926t y ==> configs/at91sam9g45m10ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9rlek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_defconfig -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_dev_defconfig -BR2_arm926t y ==> configs/atmel_sama5d3_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3xek_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/bananapi_m2_ultra_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/bananapro_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/beaglebone_qt5_defconfig -BR2_PACKAGE_TI_SGX_KM y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/beagleboneai64_defconfig -BR2_TARGET_TI_K3_BOOT_FIRMWARE y -BR2_TARGET_UBOOT_NEEDS_PYLIBFDT y ==> configs/beelink_gs1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/canaan_kd233_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/ci20_defconfig -BR2_KERNEL_HEADERS_AS_KERNEL y -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_SPL_NAME "spl/u-boot-spl.bin" ==> configs/cubieboard2_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/freescale_imx28evk_defconfig -BR2_arm926t y ==> configs/friendlyarm_nanopi_r2s_defconfig -BR2_cortex_a53 y ==> configs/globalscale_espressobin_defconfig -BR2_cortex_a53 y ==> configs/hifive_unleashed_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_GENERIC_GETTY y ==> configs/imx23evk_defconfig -BR2_arm926t y ==> configs/imxrt1050-evk_defconfig -BR2_LINUX_KERNEL_ZIMAGE y ==> configs/khadas_vim3_defconfig -BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE "khadas-vim3" ==> configs/kontron_bl_imx8mm_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/kontron_pitx_imx8m_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/kontron_smarc_sal28_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/lafrite_defconfig -BR2_cortex_a53 y ==> configs/lego_ev3_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_arm926t y ==> configs/linksprite_pcduino_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/ls1046a-frwy_defconfig -BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM "ls1046" ==> configs/mx6cubox_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/nexbox_a95x_defconfig -BR2_cortex_a53 y ==> configs/nitrogen6sx_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen6x_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen7_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen8m_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mm_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mn_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mp_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/odroidc2_defconfig -BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY y ==> configs/olimex_a10_olinuxino_lime_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a13_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a20_olinuxino_lime2_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_lime_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_micro_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a33_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a64_olinuxino_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/olimex_imx233_olinuxino_defconfig -BR2_arm926t y ==> configs/openblocks_a6_defconfig -BR2_arm926t y ==> configs/orangepi_lite2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_one_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_one_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_pc_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_pc_plus_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_r1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero2w_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero3_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero_plus2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/pine64_defconfig -BR2_cortex_a53 y ==> configs/pine64_sopine_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/qemu_aarch64_sbsa_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/qemu_aarch64_virt_defconfig -BR2_cortex_a53 y ==> configs/qemu_arm_versatile_defconfig -BR2_arm926t y ==> configs/qemu_arm_vexpress_defconfig -BR2_ARM_FPU_VFPV3D16 y ==> configs/qemu_arm_vexpress_tz_defconfig -BR2_PACKAGE_LIBOPENSSL y ==> configs/qemu_m68k_mcf5208_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_m68k_q800_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y -BR2_m68k_68040 y ==> configs/qemu_microblazebe_mmu_defconfig -BR2_microblaze y ==> configs/qemu_microblazeel_mmu_defconfig -BR2_microblaze y ==> configs/qemu_mips32r2_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r2el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc64le_powernv8_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc64le_pseries_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc_bamboo_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_g3beige_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_mpc8544ds_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_sh4_r2d_defconfig -BR2_sh4 y ==> configs/qemu_sparc64_sun4u_defconfig -BR2_sparc_v9 y ==> configs/qemu_sparc_ss10_defconfig -BR2_sparc_v8 y ==> configs/qemu_x86_defconfig -BR2_i386 y ==> configs/raspberrypi0_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi0w_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi2_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi3_64_defconfig -BR2_cortex_a53 y ==> configs/raspberrypi3_qt5we_defconfig -BR2_PACKAGE_KMOD y -BR2_PACKAGE_QT5BASE_JPEG y -BR2_PACKAGE_QT5BASE_PNG y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/raspberrypi_defconfig -BR2_ARM_EABIHF y ==> configs/riotboard_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/rock64_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rock_pi_n8_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rockpro64_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/s6lx9_microboard_defconfig -BR2_microblaze y ==> configs/sheevaplug_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NETWORK n -BR2_arm926t y ==> configs/sipeed_maix_bit_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_bit_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_dock_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_dock_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_go_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_go_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maixduino_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maixduino_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/snps_archs38_hsdk_defconfig -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/solidrun_clearfog_gt_8k_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n ==> configs/solidrun_macchiatobin_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_UBOOT_USE_DEFCONFIG y ==> configs/spike_riscv64_defconfig -BR2_RISCV_64 y ==> configs/ts5500_defconfig -BR2_i386 y -BR2_x86_i586 y ==> configs/versal_vck190_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/versal_vpk180_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kd240_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kr260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kv260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu102_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu104_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu106_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ---8<------8<------8<------8<------8<---
2024-09-22 00:32:59 +08:00
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
configs/minnowboard_max: configure eth0 through dhcp The minnowboard max board has an ethernet port, so configure it at startup. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-15 15:50:08 +08:00
BR2_SYSTEM_DHCP="eth0"
board/minnowboard: Unify Minnowboard and Minnowboard MAX boards Given Minnowboard and Minnowboard MAX boards are very similar, it's desirable to unify the support for them. This commit does the following: 1) Remove Minnowboard MAX's genimage.cfg, post-build.sh and post-image.sh. These are identical to Minnowboard's. 2) Move Minnowboard MAX's linux config, and rename it. It would be lovely to have a single kernel config file. The kernel size penalty involved in adding support for all the peripherals on both boards is small enough to justify this. However, the original Minnowboard has some GPIO buttons that need to be registered by the kernel. This is not upstreamed, and hence we need to use the yocto v3.8 kernel to have this support. 3) Rename each grub config to grub-{board}.cfg. 4) Modify (the now unique) post-build script to use a different grub config, according to the board. 5) Update both defconfigs, as per the above changes. 6) Finally, update the readme.txt. [Peter: mention MAX in readme title] Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-15 23:56:05 +08:00
BR2_ROOTFS_POST_BUILD_SCRIPT="board/minnowboard/post-build.sh"
configs/minnowboard_max: drop custom post-image script Use support/scripts/genimage.sh, instead, which prevents duplicating TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root. Signed-off-by: Carlos Santos <unixmania@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-10-13 08:22:28 +08:00
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/minnowboard/genimage.cfg"
board: add support for Minnowboard MAX Very similar to the older Minnowboard, except that it works with mainline Linux, uses 64bit firmware and a realtek NIC needing firmware. The Linux configuration is based on the configuration fragment on elinux: http://elinux.org/Minnowboard:MinnowMaxLinuxKernel Many thanks to Circuitco for sponsoring a board. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-11-03 04:59:47 +08:00
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
configs/minnowboard_max_defconfig: bump kernel to 5.10.11 Explicitly enable PCI support in the kernel after commit eb01d42a77785 (PCI: consolidate PCI config entry in drivers/pci) and change to GPT partitions / root=PARTLABEL to find the rootfs instead of hardcoding /dev/mmcblk2p2 as the mmc probing order has changed since commit 21b2cec61c04bd1 (mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4). This has the additional advantage that the same image will work when written to a USB drive instead of a microsd. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-01-30 18:19:13 +08:00
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.11"
board: add support for Minnowboard MAX Very similar to the older Minnowboard, except that it works with mainline Linux, uses 64bit firmware and a realtek NIC needing firmware. The Linux configuration is based on the configuration fragment on elinux: http://elinux.org/Minnowboard:MinnowMaxLinuxKernel Many thanks to Circuitco for sponsoring a board. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-11-03 04:59:47 +08:00
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
minnowboard_max: bump to kernel 4.12.2 And drop the version number from the linux configuration. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-15 22:12:53 +08:00
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/minnowboard/linux.config"
configs: regenerate all defconfigs During the hackathon in Vienna, it was decided [0] to stop requiring annotated defconfig files, and that they should all be regenerated. This commit does just that. This is a mechanical change, achieved by running (the defcfg script is repriducedc at the end of the commit log): $ for cfg in configs/*_defconfig; do ./defcfg "${cfg##*/}" || break done Out of our 302 defconfig files, only 247 needed regenerating, which means that about 1 in 5 was already not providing the requested annotations. To be noted: three defconfig files had duplicate definitions, which this commit resolves: nitrogen6sx_defconfig nitrogen7_defconfig olimex_a33_olinuxino_defconfig warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS [0] https://elinux.org/Buildroot:DeveloperDaysELCE2024#Rules_for_defconfigs Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr> Cc: Edgar Bonet <bonet@grenoble.cnrs.fr> Signed-off-by: Arnout Vandecappelle <arnout@mind.be> ==== Below is the script to reproduce the commmit. What it does is regenerate the configuration first, then applies a patch to update kernel headers to 3.11, and then recalls the defconfig again, and finally verifies that the 3.11 headers are not selected (and ignores whether the latest are selected or not): we want to catch whether defconfig that were using 3.10, currently the latest we support, would stioll get those headers after we regeerate those. --->8------>8------>8------>8------>8--- #!/bin/sh cfg="${1}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in make "${cfg}" make savedefconfig patch -p1 <<_EOF_ diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 2ae4077ffe..e669f89267 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -129,8 +129,12 @@ choice If your kernel headers are more recent than the latest version in the choice, then select the latest version. +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11 + bool "6.11.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10 - bool "6.10.x or later" + bool "6.10.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9 diff --git a/toolchain/Config.in b/toolchain/Config.in index 6e91ab756c..c2522aca7f 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -656,6 +656,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 bool select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 + +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 select BR2_TOOLCHAIN_HEADERS_LATEST # This should be selected by the latest version, above, to indicate that @@ -669,6 +673,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "6.11" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 default "6.10" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 default "6.9" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 default "6.8" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_8 _EOF_ make "${cfg}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in diff="$( diff -I '_6_11\|BR2_TOOLCHAIN_HEADERS_LATEST=y' -du \ <( tail -n +5 .config.old ) \ <( tail -n +5 .config ) )" if [ "${diff}" ]; then printf 'Not idempotent for "%s"\n' "${cfg}" >&2 exit 1 fi ---8<------8<------8<------8<------8<--- ==== To verify that no other changes are made to the defconfigs that are risky when the defaults change, we ran the following simple script (where buildroot-prev is a checkout just before this commit). It shows that there are many settings removed because they are default, but none of them run the same risk that the default is going to be changed in the future. for i in configs/*_defconfig; do diff="$(diffconfig ../buildroot-next/$i $i)" if [ -n "$diff" ]; then echo "==> $i" echo "$diff" echo fi done --->8------>8------>8------>8------>8--- ==> configs/aarch64_efi_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/acmesystems_aria_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_aria_g25_256mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_256mb_defconfig -BR2_arm926t y ==> configs/amarula_vyasa_rk3288_defconfig -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/armadeus_apf27_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf28_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf51_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/aspeed_ast2600evb_defconfig -BR2_ARM_FPU_VFPV4D16 y ==> configs/asus_tinker-s_rk3288_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/at91sam9260eknf_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9g20dfc_defconfig -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_ROOTFS_UBIFS y -BR2_TARGET_ROOTFS_UBIFS_LEBSIZE 0x1f800 -BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE 0x800 -BR2_TARGET_ROOTFS_UBI_PEBSIZE 0x20000 -BR2_TARGET_ROOTFS_UBI_SUBSIZE 512 -BR2_arm926t y ==> configs/at91sam9g45m10ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9rlek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_defconfig -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_dev_defconfig -BR2_arm926t y ==> configs/atmel_sama5d3_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3xek_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/bananapi_m2_ultra_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/bananapro_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/beaglebone_qt5_defconfig -BR2_PACKAGE_TI_SGX_KM y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/beagleboneai64_defconfig -BR2_TARGET_TI_K3_BOOT_FIRMWARE y -BR2_TARGET_UBOOT_NEEDS_PYLIBFDT y ==> configs/beelink_gs1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/canaan_kd233_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/ci20_defconfig -BR2_KERNEL_HEADERS_AS_KERNEL y -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_SPL_NAME "spl/u-boot-spl.bin" ==> configs/cubieboard2_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/freescale_imx28evk_defconfig -BR2_arm926t y ==> configs/friendlyarm_nanopi_r2s_defconfig -BR2_cortex_a53 y ==> configs/globalscale_espressobin_defconfig -BR2_cortex_a53 y ==> configs/hifive_unleashed_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_GENERIC_GETTY y ==> configs/imx23evk_defconfig -BR2_arm926t y ==> configs/imxrt1050-evk_defconfig -BR2_LINUX_KERNEL_ZIMAGE y ==> configs/khadas_vim3_defconfig -BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE "khadas-vim3" ==> configs/kontron_bl_imx8mm_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/kontron_pitx_imx8m_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/kontron_smarc_sal28_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/lafrite_defconfig -BR2_cortex_a53 y ==> configs/lego_ev3_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_arm926t y ==> configs/linksprite_pcduino_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/ls1046a-frwy_defconfig -BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM "ls1046" ==> configs/mx6cubox_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/nexbox_a95x_defconfig -BR2_cortex_a53 y ==> configs/nitrogen6sx_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen6x_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen7_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen8m_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mm_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mn_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mp_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/odroidc2_defconfig -BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY y ==> configs/olimex_a10_olinuxino_lime_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a13_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a20_olinuxino_lime2_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_lime_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_micro_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a33_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a64_olinuxino_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/olimex_imx233_olinuxino_defconfig -BR2_arm926t y ==> configs/openblocks_a6_defconfig -BR2_arm926t y ==> configs/orangepi_lite2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_one_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_one_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_pc_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_pc_plus_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_r1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero2w_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero3_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero_plus2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/pine64_defconfig -BR2_cortex_a53 y ==> configs/pine64_sopine_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/qemu_aarch64_sbsa_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/qemu_aarch64_virt_defconfig -BR2_cortex_a53 y ==> configs/qemu_arm_versatile_defconfig -BR2_arm926t y ==> configs/qemu_arm_vexpress_defconfig -BR2_ARM_FPU_VFPV3D16 y ==> configs/qemu_arm_vexpress_tz_defconfig -BR2_PACKAGE_LIBOPENSSL y ==> configs/qemu_m68k_mcf5208_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_m68k_q800_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y -BR2_m68k_68040 y ==> configs/qemu_microblazebe_mmu_defconfig -BR2_microblaze y ==> configs/qemu_microblazeel_mmu_defconfig -BR2_microblaze y ==> configs/qemu_mips32r2_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r2el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc64le_powernv8_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc64le_pseries_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc_bamboo_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_g3beige_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_mpc8544ds_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_sh4_r2d_defconfig -BR2_sh4 y ==> configs/qemu_sparc64_sun4u_defconfig -BR2_sparc_v9 y ==> configs/qemu_sparc_ss10_defconfig -BR2_sparc_v8 y ==> configs/qemu_x86_defconfig -BR2_i386 y ==> configs/raspberrypi0_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi0w_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi2_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi3_64_defconfig -BR2_cortex_a53 y ==> configs/raspberrypi3_qt5we_defconfig -BR2_PACKAGE_KMOD y -BR2_PACKAGE_QT5BASE_JPEG y -BR2_PACKAGE_QT5BASE_PNG y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/raspberrypi_defconfig -BR2_ARM_EABIHF y ==> configs/riotboard_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/rock64_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rock_pi_n8_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rockpro64_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/s6lx9_microboard_defconfig -BR2_microblaze y ==> configs/sheevaplug_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NETWORK n -BR2_arm926t y ==> configs/sipeed_maix_bit_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_bit_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_dock_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_dock_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_go_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_go_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maixduino_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maixduino_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/snps_archs38_hsdk_defconfig -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/solidrun_clearfog_gt_8k_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n ==> configs/solidrun_macchiatobin_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_UBOOT_USE_DEFCONFIG y ==> configs/spike_riscv64_defconfig -BR2_RISCV_64 y ==> configs/ts5500_defconfig -BR2_i386 y -BR2_x86_i586 y ==> configs/versal_vck190_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/versal_vpk180_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kd240_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kr260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kv260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu102_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu104_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu106_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ---8<------8<------8<------8<------8<---
2024-09-22 00:32:59 +08:00
BR2_PACKAGE_LINUX_FIRMWARE=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_8169=y
board/minnowboard-max: Rework to generate SD card image Let's rework the board and config files to use genimage to generate the SD card image directly. [Peter: add host-mtools for genimage vfat handling] Signed-off-by: Ezequiel García <ezequiel@vanguardiasur.com.ar> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-12 13:29:22 +08:00
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
# BR2_TARGET_ROOTFS_TAR is not set
configs: regenerate all defconfigs During the hackathon in Vienna, it was decided [0] to stop requiring annotated defconfig files, and that they should all be regenerated. This commit does just that. This is a mechanical change, achieved by running (the defcfg script is repriducedc at the end of the commit log): $ for cfg in configs/*_defconfig; do ./defcfg "${cfg##*/}" || break done Out of our 302 defconfig files, only 247 needed regenerating, which means that about 1 in 5 was already not providing the requested annotations. To be noted: three defconfig files had duplicate definitions, which this commit resolves: nitrogen6sx_defconfig nitrogen7_defconfig olimex_a33_olinuxino_defconfig warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS [0] https://elinux.org/Buildroot:DeveloperDaysELCE2024#Rules_for_defconfigs Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr> Cc: Edgar Bonet <bonet@grenoble.cnrs.fr> Signed-off-by: Arnout Vandecappelle <arnout@mind.be> ==== Below is the script to reproduce the commmit. What it does is regenerate the configuration first, then applies a patch to update kernel headers to 3.11, and then recalls the defconfig again, and finally verifies that the 3.11 headers are not selected (and ignores whether the latest are selected or not): we want to catch whether defconfig that were using 3.10, currently the latest we support, would stioll get those headers after we regeerate those. --->8------>8------>8------>8------>8--- #!/bin/sh cfg="${1}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in make "${cfg}" make savedefconfig patch -p1 <<_EOF_ diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 2ae4077ffe..e669f89267 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -129,8 +129,12 @@ choice If your kernel headers are more recent than the latest version in the choice, then select the latest version. +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11 + bool "6.11.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10 - bool "6.10.x or later" + bool "6.10.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9 diff --git a/toolchain/Config.in b/toolchain/Config.in index 6e91ab756c..c2522aca7f 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -656,6 +656,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 bool select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 + +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 select BR2_TOOLCHAIN_HEADERS_LATEST # This should be selected by the latest version, above, to indicate that @@ -669,6 +673,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "6.11" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 default "6.10" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 default "6.9" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 default "6.8" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_8 _EOF_ make "${cfg}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in diff="$( diff -I '_6_11\|BR2_TOOLCHAIN_HEADERS_LATEST=y' -du \ <( tail -n +5 .config.old ) \ <( tail -n +5 .config ) )" if [ "${diff}" ]; then printf 'Not idempotent for "%s"\n' "${cfg}" >&2 exit 1 fi ---8<------8<------8<------8<------8<--- ==== To verify that no other changes are made to the defconfigs that are risky when the defaults change, we ran the following simple script (where buildroot-prev is a checkout just before this commit). It shows that there are many settings removed because they are default, but none of them run the same risk that the default is going to be changed in the future. for i in configs/*_defconfig; do diff="$(diffconfig ../buildroot-next/$i $i)" if [ -n "$diff" ]; then echo "==> $i" echo "$diff" echo fi done --->8------>8------>8------>8------>8--- ==> configs/aarch64_efi_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/acmesystems_aria_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_aria_g25_256mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_256mb_defconfig -BR2_arm926t y ==> configs/amarula_vyasa_rk3288_defconfig -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/armadeus_apf27_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf28_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf51_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/aspeed_ast2600evb_defconfig -BR2_ARM_FPU_VFPV4D16 y ==> configs/asus_tinker-s_rk3288_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/at91sam9260eknf_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9g20dfc_defconfig -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_ROOTFS_UBIFS y -BR2_TARGET_ROOTFS_UBIFS_LEBSIZE 0x1f800 -BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE 0x800 -BR2_TARGET_ROOTFS_UBI_PEBSIZE 0x20000 -BR2_TARGET_ROOTFS_UBI_SUBSIZE 512 -BR2_arm926t y ==> configs/at91sam9g45m10ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9rlek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_defconfig -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_dev_defconfig -BR2_arm926t y ==> configs/atmel_sama5d3_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3xek_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/bananapi_m2_ultra_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/bananapro_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/beaglebone_qt5_defconfig -BR2_PACKAGE_TI_SGX_KM y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/beagleboneai64_defconfig -BR2_TARGET_TI_K3_BOOT_FIRMWARE y -BR2_TARGET_UBOOT_NEEDS_PYLIBFDT y ==> configs/beelink_gs1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/canaan_kd233_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/ci20_defconfig -BR2_KERNEL_HEADERS_AS_KERNEL y -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_SPL_NAME "spl/u-boot-spl.bin" ==> configs/cubieboard2_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/freescale_imx28evk_defconfig -BR2_arm926t y ==> configs/friendlyarm_nanopi_r2s_defconfig -BR2_cortex_a53 y ==> configs/globalscale_espressobin_defconfig -BR2_cortex_a53 y ==> configs/hifive_unleashed_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_GENERIC_GETTY y ==> configs/imx23evk_defconfig -BR2_arm926t y ==> configs/imxrt1050-evk_defconfig -BR2_LINUX_KERNEL_ZIMAGE y ==> configs/khadas_vim3_defconfig -BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE "khadas-vim3" ==> configs/kontron_bl_imx8mm_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/kontron_pitx_imx8m_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/kontron_smarc_sal28_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/lafrite_defconfig -BR2_cortex_a53 y ==> configs/lego_ev3_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_arm926t y ==> configs/linksprite_pcduino_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/ls1046a-frwy_defconfig -BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM "ls1046" ==> configs/mx6cubox_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/nexbox_a95x_defconfig -BR2_cortex_a53 y ==> configs/nitrogen6sx_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen6x_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen7_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen8m_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mm_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mn_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mp_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/odroidc2_defconfig -BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY y ==> configs/olimex_a10_olinuxino_lime_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a13_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a20_olinuxino_lime2_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_lime_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_micro_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a33_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a64_olinuxino_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/olimex_imx233_olinuxino_defconfig -BR2_arm926t y ==> configs/openblocks_a6_defconfig -BR2_arm926t y ==> configs/orangepi_lite2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_one_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_one_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_pc_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_pc_plus_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_r1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero2w_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero3_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero_plus2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/pine64_defconfig -BR2_cortex_a53 y ==> configs/pine64_sopine_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/qemu_aarch64_sbsa_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/qemu_aarch64_virt_defconfig -BR2_cortex_a53 y ==> configs/qemu_arm_versatile_defconfig -BR2_arm926t y ==> configs/qemu_arm_vexpress_defconfig -BR2_ARM_FPU_VFPV3D16 y ==> configs/qemu_arm_vexpress_tz_defconfig -BR2_PACKAGE_LIBOPENSSL y ==> configs/qemu_m68k_mcf5208_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_m68k_q800_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y -BR2_m68k_68040 y ==> configs/qemu_microblazebe_mmu_defconfig -BR2_microblaze y ==> configs/qemu_microblazeel_mmu_defconfig -BR2_microblaze y ==> configs/qemu_mips32r2_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r2el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc64le_powernv8_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc64le_pseries_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc_bamboo_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_g3beige_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_mpc8544ds_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_sh4_r2d_defconfig -BR2_sh4 y ==> configs/qemu_sparc64_sun4u_defconfig -BR2_sparc_v9 y ==> configs/qemu_sparc_ss10_defconfig -BR2_sparc_v8 y ==> configs/qemu_x86_defconfig -BR2_i386 y ==> configs/raspberrypi0_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi0w_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi2_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi3_64_defconfig -BR2_cortex_a53 y ==> configs/raspberrypi3_qt5we_defconfig -BR2_PACKAGE_KMOD y -BR2_PACKAGE_QT5BASE_JPEG y -BR2_PACKAGE_QT5BASE_PNG y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/raspberrypi_defconfig -BR2_ARM_EABIHF y ==> configs/riotboard_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/rock64_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rock_pi_n8_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rockpro64_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/s6lx9_microboard_defconfig -BR2_microblaze y ==> configs/sheevaplug_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NETWORK n -BR2_arm926t y ==> configs/sipeed_maix_bit_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_bit_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_dock_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_dock_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_go_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_go_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maixduino_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maixduino_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/snps_archs38_hsdk_defconfig -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/solidrun_clearfog_gt_8k_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n ==> configs/solidrun_macchiatobin_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_UBOOT_USE_DEFCONFIG y ==> configs/spike_riscv64_defconfig -BR2_RISCV_64 y ==> configs/ts5500_defconfig -BR2_i386 y -BR2_x86_i586 y ==> configs/versal_vck190_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/versal_vpk180_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kd240_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kr260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kv260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu102_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu104_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu106_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ---8<------8<------8<------8<------8<---
2024-09-22 00:32:59 +08:00
BR2_TARGET_GRUB2=y
BR2_TARGET_GRUB2_X86_64_EFI=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
Reference in New Issue Copy Permalink