mirrors/buildroot
0
0
Fork 0
mirror of https://git.busybox.net/buildroot.git synced 2024-11-27 07:23:30 +08:00
Code Issues Packages Projects Releases Wiki Activity
dbf2ca9b5b
buildroot/configs/visionfive2_defconfig

40 lines
1.5 KiB
Plaintext
Raw Normal View History

configs/visionfive2_defconfig: new defconfig Add a defconfig for the Starfive VisionFive2 board, a board built around the Starfive JH7110 RISC-V 64bit SoC. This board comes with functional lowlevel and U-Boot bootloaders in SPI flash. The defconfig reuses these and only builds a (5.15 based) kernel and rootfs. The factory shipped U-Boot is hard coded to look at MMC partition 3. Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com> [Peter: add to DEVELOPERS] Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-12-19 16:57:10 +08:00
BR2_riscv=y
configs/visionfive2_defconfig: add hashes for linux/opensbi/u-boot Enable BR2_DOWNLOAD_FORCE_CHECK_HASHES and set the patch directory. Signed-off-by: Lukasz Tekieli <tekieli.lukasz@gmail.com> [Romain: remove .checkpackageignore entry] Signed-off-by: Romain Naour <romain.naour@smile.fr>
2024-05-02 03:04:41 +08:00
BR2_GLOBAL_PATCH_DIR="board/visionfive2/patches"
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
configs/visionfive2_defconfig: new defconfig Add a defconfig for the Starfive VisionFive2 board, a board built around the Starfive JH7110 RISC-V 64bit SoC. This board comes with functional lowlevel and U-Boot bootloaders in SPI flash. The defconfig reuses these and only builds a (5.15 based) kernel and rootfs. The factory shipped U-Boot is hard coded to look at MMC partition 3. Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com> [Peter: add to DEVELOPERS] Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-12-19 16:57:10 +08:00
BR2_SYSTEM_DHCP="eth0"
BR2_ROOTFS_OVERLAY="board/visionfive2/overlay"
board/visionfive2: add spi-nor image Builds the spi-nor.img together with the sdcard.img. Readme is extended with SPI NOR flash writing instructions and recovery. The spi-nor.img layout is based on the following document: https://doc-en.rvspace.org/VisionFive2/Boot_UG/JH7110_SDK/boot_address_allocation.html Signed-off-by: Lukasz Tekieli <tekieli.lukasz@gmail.com> [Arnout: extend readme.txt with paragraph that either boot mode works.] Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
2024-04-15 03:06:44 +08:00
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/visionfive2/post-image.sh"
configs/visionfive2_defconfig: new defconfig Add a defconfig for the Starfive VisionFive2 board, a board built around the Starfive JH7110 RISC-V 64bit SoC. This board comes with functional lowlevel and U-Boot bootloaders in SPI flash. The defconfig reuses these and only builds a (5.15 based) kernel and rootfs. The factory shipped U-Boot is hard coded to look at MMC partition 3. Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com> [Peter: add to DEVELOPERS] Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-12-19 16:57:10 +08:00
BR2_LINUX_KERNEL=y
configs/visionfive2: update kernel to upstream 6.8.2 The configuration is based on defconfig from starfive's kernel fork [1]. [1] https://github.com/starfive-tech/linux/blob/076ede06c00a4069cd9f90d609eaf35bf1bdc68a/arch/riscv/configs/starfive_visionfive2_defconfig Signed-off-by: Lukasz Tekieli <tekieli.lukasz@gmail.com> Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
2024-04-15 02:00:34 +08:00
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.8.2"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/visionfive2/linux_defconfig"
configs/visionfive2_defconfig: new defconfig Add a defconfig for the Starfive VisionFive2 board, a board built around the Starfive JH7110 RISC-V 64bit SoC. This board comes with functional lowlevel and U-Boot bootloaders in SPI flash. The defconfig reuses these and only builds a (5.15 based) kernel and rootfs. The factory shipped U-Boot is hard coded to look at MMC partition 3. Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com> [Peter: add to DEVELOPERS] Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-12-19 16:57:10 +08:00
BR2_LINUX_KERNEL_DTS_SUPPORT=y
configs/visionfive2: update kernel to upstream 6.8.2 The configuration is based on defconfig from starfive's kernel fork [1]. [1] https://github.com/starfive-tech/linux/blob/076ede06c00a4069cd9f90d609eaf35bf1bdc68a/arch/riscv/configs/starfive_visionfive2_defconfig Signed-off-by: Lukasz Tekieli <tekieli.lukasz@gmail.com> Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
2024-04-15 02:00:34 +08:00
BR2_LINUX_KERNEL_INTREE_DTS_NAME="starfive/jh7110-starfive-visionfive-2-v1.3b"
configs/visionfive2_defconfig: new defconfig Add a defconfig for the Starfive VisionFive2 board, a board built around the Starfive JH7110 RISC-V 64bit SoC. This board comes with functional lowlevel and U-Boot bootloaders in SPI flash. The defconfig reuses these and only builds a (5.15 based) kernel and rootfs. The factory shipped U-Boot is hard coded to look at MMC partition 3. Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com> [Peter: add to DEVELOPERS] Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-12-19 16:57:10 +08:00
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
# BR2_TARGET_ROOTFS_TAR is not set
board/visionfive2: enable u-boot Enables U-Boot and required OpenSBI builds for the VisionFive2. Changes the sdcard.img to use GPT and adds the SPL and U-Boot to partitions specified in U-Boot's documentation for the board: https://docs.u-boot.org/en/v2024.01/board/starfive/visionfive2.html U-Boot config uses BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME with value "u-boot.itb". Using BR2_TARGET_UBOOT_FORMAT_ITB fails, because the build does not support u-boot.itb make target. Signed-off-by: Lukasz Tekieli <tekieli.lukasz@gmail.com> [Peter: document boot mode setting, add U-Boot documentation link] Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2024-02-09 05:15:17 +08:00
BR2_TARGET_OPENSBI=y
BR2_TARGET_OPENSBI_CUSTOM_VERSION=y
BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.4"
BR2_TARGET_OPENSBI_PLAT="generic"
# BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set
BR2_TARGET_OPENSBI_ADDITIONAL_VARIABLES="FW_TEXT_START=0x40000000 FW_OPTIONS=0"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
configs/visionfive2: update u-boot to 2024.04 Signed-off-by: Lukasz Tekieli <tekieli.lukasz@gmail.com> Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
2024-04-15 02:14:08 +08:00
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.04"
board/visionfive2: enable u-boot Enables U-Boot and required OpenSBI builds for the VisionFive2. Changes the sdcard.img to use GPT and adds the SPL and U-Boot to partitions specified in U-Boot's documentation for the board: https://docs.u-boot.org/en/v2024.01/board/starfive/visionfive2.html U-Boot config uses BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME with value "u-boot.itb". Using BR2_TARGET_UBOOT_FORMAT_ITB fails, because the build does not support u-boot.itb make target. Signed-off-by: Lukasz Tekieli <tekieli.lukasz@gmail.com> [Peter: document boot mode setting, add U-Boot documentation link] Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2024-02-09 05:15:17 +08:00
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="starfive_visionfive2"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
BR2_TARGET_UBOOT_NEEDS_OPENSBI=y
configs/visionfive2: uboot needs openssl The defconfig fails in uboot build, with output: scripts/sign-file.c:25:10: fatal error: openssl/opensslv.h: No such file or directory 25 | #include <openssl/opensslv.h> | ^~~~~~~~~~~~~~~~~~~~ This commit fixes the issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the defconfig. Fixes: - https://gitlab.com/buildroot.org/buildroot/-/jobs/6929002318 Signed-off-by: Julien Olivain <ju.o@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2024-05-25 05:13:59 +08:00
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
board/visionfive2: enable u-boot Enables U-Boot and required OpenSBI builds for the VisionFive2. Changes the sdcard.img to use GPT and adds the SPL and U-Boot to partitions specified in U-Boot's documentation for the board: https://docs.u-boot.org/en/v2024.01/board/starfive/visionfive2.html U-Boot config uses BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME with value "u-boot.itb". Using BR2_TARGET_UBOOT_FORMAT_ITB fails, because the build does not support u-boot.itb make target. Signed-off-by: Lukasz Tekieli <tekieli.lukasz@gmail.com> [Peter: document boot mode setting, add U-Boot documentation link] Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2024-02-09 05:15:17 +08:00
# BR2_TARGET_UBOOT_FORMAT_BIN is not set
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin.normal.out"
configs/visionfive2_defconfig: new defconfig Add a defconfig for the Starfive VisionFive2 board, a board built around the Starfive JH7110 RISC-V 64bit SoC. This board comes with functional lowlevel and U-Boot bootloaders in SPI flash. The defconfig reuses these and only builds a (5.15 based) kernel and rootfs. The factory shipped U-Boot is hard coded to look at MMC partition 3. Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com> [Peter: add to DEVELOPERS] Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-12-19 16:57:10 +08:00
BR2_PACKAGE_HOST_GENIMAGE=y
Reference in New Issue Copy Permalink