mirrors/buildroot
0
0
Fork 0
mirror of https://git.busybox.net/buildroot.git synced 2024-11-23 13:33:28 +08:00
Code Issues Packages Projects Releases Wiki Activity
7d358fe180
buildroot/configs/stm32mp157c_dk2_defconfig

44 lines
1.9 KiB
Plaintext
Raw Normal View History

configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 22:24:56 +08:00
BR2_arm=y
BR2_cortex_a7=y
configs/stm32mp157c_dk2: bump {TF-A, U-Boot, Linux} versions up Bump TF-A to v2.9 Bump U-Boot to v2024.07 Bump Linux to v6.0 Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2024-07-13 06:13:33 +08:00
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9=y
board/stmicroelectronics/common/stm32mp157: rename folder STM32MP15x and STM32MP13 can use almost of the same configuration regarding bootloaders and the Linux kernel. To make profit of the commont folder, rename it to 'stm32mp1xx' and change dependencies accordingly. Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2024-08-15 02:37:02 +08:00
BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/common/stm32mp1xx/patches"
configs/stm32mp157c_dk2: add hashes Now that the configurations of boards stm32mp157a-dk1 and stm32mp157c-dk2 have the same software versions, it is possible to share the hash files as well. The patch uses the hash files for Arm Trusted Firmware, Linux, Linux headers and U-Boot of stm32mp175a_dk1 also for stm32mp175c_dk2, and then enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the defconfig from .checkpackageignore. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2024-07-14 05:52:18 +08:00
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
configs/stm32mp157_dk: rename to the sm32mp157c_dk2 That is useful and needed for upcoming introducing stm32mp157a-dk1 board. Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-10-27 20:53:39 +08:00
BR2_ROOTFS_OVERLAY="board/stmicroelectronics/stm32mp157c-dk2/overlay/"
board/stmicroelectronics/common/stm32mp157: rename folder STM32MP15x and STM32MP13 can use almost of the same configuration regarding bootloaders and the Linux kernel. To make profit of the commont folder, rename it to 'stm32mp1xx' and change dependencies accordingly. Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2024-08-15 02:37:02 +08:00
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/stmicroelectronics/common/stm32mp1xx/post-image.sh"
configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 22:24:56 +08:00
BR2_LINUX_KERNEL=y
configs/stm32mp157_dk_defconfig: switch to mainline 5.3.7 linux version Switch to the official Linux repository since the board has been officially supported. Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-10-25 01:29:42 +08:00
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
configs/stm32mp157c_dk2: bump {TF-A, U-Boot, Linux} versions up Bump TF-A to v2.9 Bump U-Boot to v2024.07 Bump Linux to v6.0 Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2024-07-13 06:13:33 +08:00
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.9.8"
configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 22:24:56 +08:00
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
configs/stm32mp157_dk: rename to the sm32mp157c_dk2 That is useful and needed for upcoming introducing stm32mp157a-dk1 board. Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-10-27 20:53:39 +08:00
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/stmicroelectronics/stm32mp157c-dk2/linux.config"
configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 22:24:56 +08:00
BR2_LINUX_KERNEL_DTS_SUPPORT=y
configs/stm32mp157c_dk2: bump {TF-A, U-Boot, Linux} versions up Bump TF-A to v2.9 Bump U-Boot to v2024.07 Bump Linux to v6.0 Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2024-07-13 06:13:33 +08:00
BR2_LINUX_KERNEL_INTREE_DTS_NAME="st/stm32mp157c-dk2"
configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 22:24:56 +08:00
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
# BR2_TARGET_ROOTFS_TAR is not set
configs/stm32mp157*: switch to use TF-A based configurations This commit changes the stm32mp1 configurations to use the TF-A -> U-Boot boot flow (called "trusted boot flow" by ST) instead of the U-Boot SPL -> U-Boot boot flow. ST recommands this trusted boot, and it's also the only one that allows to use the STM32 Cube Programmer for reflashing devices. As part of this, the genimage configuration file is now generated, as it contains some file names that depend on the platform. Removing partition-type from genimage.cfg is mandatory, since it would cause a hybrid MBR partition table to be created, which itself would prevent ATF from finding the ssbl parition. Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-10-07 22:49:43 +08:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
configs/stm32mp157c_dk2: bump {TF-A, U-Boot, Linux} versions up Bump TF-A to v2.9 Bump U-Boot to v2024.07 Bump Linux to v6.0 Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2024-07-13 06:13:33 +08:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.9"
configs/stm32mp157*: switch to use TF-A based configurations This commit changes the stm32mp1 configurations to use the TF-A -> U-Boot boot flow (called "trusted boot flow" by ST) instead of the U-Boot SPL -> U-Boot boot flow. ST recommands this trusted boot, and it's also the only one that allows to use the STM32 Cube Programmer for reflashing devices. As part of this, the genimage configuration file is now generated, as it contains some file names that depend on the platform. Removing partition-type from genimage.cfg is mandatory, since it would cause a hybrid MBR partition table to be created, which itself would prevent ATF from finding the ssbl parition. Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-10-07 22:49:43 +08:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="stm32mp1"
configs/stm32mp157*: bump ATF to v2.6 - v2.6 changes to FIP instead of SSBL boot. - This requires switching to u-boot.bin in U-Boot, and using that instead of .stm32 in ATF. - fiptool expects dtb to be split off from u-boot.bin, so need custom u-boot-nodtb.bin in addition to u-boot.dtb. Caveat: this is perhaps not really obligatory, but the ATF documentation explains it like that. - The partition must be named fip (while it must be named ssbl for SSBL boot). - Since the partition name is set in the common template, all defconfigs using that template must be bumped in a single commit - ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has been added to the configs - While we're at it, add the structuring comments to avenger96_defconfig similar like the other defconfigs Signed-off-by: Marleen Vos <marleen.vos@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-12-19 20:15:04 +08:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE="u-boot-nodtb.bin"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="STM32MP_SDMMC=1 AARCH32_SP=sp_min DTB_FILE_NAME=stm32mp157c-dk2.dtb E=0 BL33_CFG=$(BINARIES_DIR)/u-boot.dtb"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin *.stm32"
configs/stm32mp157*: switch to use TF-A based configurations This commit changes the stm32mp1 configurations to use the TF-A -> U-Boot boot flow (called "trusted boot flow" by ST) instead of the U-Boot SPL -> U-Boot boot flow. ST recommands this trusted boot, and it's also the only one that allows to use the STM32 Cube Programmer for reflashing devices. As part of this, the genimage configuration file is now generated, as it contains some file names that depend on the platform. Removing partition-type from genimage.cfg is mandatory, since it would cause a hybrid MBR partition table to be created, which itself would prevent ATF from finding the ssbl parition. Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-10-07 22:49:43 +08:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC=y
configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 22:24:56 +08:00
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
configs/stm32mp157_dk_defconfig: switch to mainline 2019.07 U-Boot version Switch to the official U-Boot repository since the board has been officially supported. Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-10-25 01:29:43 +08:00
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
configs/stm32mp157c_dk2: bump {TF-A, U-Boot, Linux} versions up Bump TF-A to v2.9 Bump U-Boot to v2024.07 Bump Linux to v6.0 Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2024-07-13 06:13:33 +08:00
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07"
configs/stm32mp157*: switch to use TF-A based configurations This commit changes the stm32mp1 configurations to use the TF-A -> U-Boot boot flow (called "trusted boot flow" by ST) instead of the U-Boot SPL -> U-Boot boot flow. ST recommands this trusted boot, and it's also the only one that allows to use the STM32 Cube Programmer for reflashing devices. As part of this, the genimage configuration file is now generated, as it contains some file names that depend on the platform. Removing partition-type from genimage.cfg is mandatory, since it would cause a hybrid MBR partition table to be created, which itself would prevent ATF from finding the ssbl parition. Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-10-07 22:49:43 +08:00
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp15_trusted"
configs/stm32mp157*_dk*: bump U-Boot version to 2023.04 The u-boot.stm32 image is now created by binman tool, so the BR2_TARGET_UBOOT_BUILD_FORMAT_STM32_LEGACY configuration needs to be disabled, but pylibfdt is now needed. Tested on stm32mp157f_dk2. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-07-04 00:01:49 +08:00
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
configs/stm32mp157*: uboot needs openssl Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1746850755 https://gitlab.com/buildroot.org/buildroot/-/jobs/1746850753 https://gitlab.com/buildroot.org/buildroot/-/jobs/1746850754 Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-11-06 18:02:44 +08:00
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
configs/stm32mp157c_dk2: bump {TF-A, U-Boot, Linux} versions up Bump TF-A to v2.9 Bump U-Boot to v2024.07 Bump Linux to v6.0 Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2024-07-13 06:13:33 +08:00
# BR2_TARGET_UBOOT_FORMAT_BIN is not set
configs/stm32mp157*: bump ATF to v2.6 - v2.6 changes to FIP instead of SSBL boot. - This requires switching to u-boot.bin in U-Boot, and using that instead of .stm32 in ATF. - fiptool expects dtb to be split off from u-boot.bin, so need custom u-boot-nodtb.bin in addition to u-boot.dtb. Caveat: this is perhaps not really obligatory, but the ATF documentation explains it like that. - The partition must be named fip (while it must be named ssbl for SSBL boot). - Since the partition name is set in the common template, all defconfigs using that template must be bumped in a single commit - ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has been added to the configs - While we're at it, add the structuring comments to avenger96_defconfig similar like the other defconfigs Signed-off-by: Marleen Vos <marleen.vos@mind.be> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-12-19 20:15:04 +08:00
BR2_TARGET_UBOOT_FORMAT_DTB=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin"
configs/stm32mp157_dk: new defconfig This commit adds a minimal defconfig to build a Buildroot system for the STM32MP157 Discovery Kit, which is the low-cost evaluation platform for the new STM32MP157 system-on-chip from ST. This system-on-chip features a single or dual Cortex-A7, a single Cortex-M4, and a wide variety of peripherals. This commit includes a custom linux configuration file, because there is no specific defconfig for this platform in the kernel, only multi_v7_defconfig supports it, which is really a massive defconfig. That's why a custom linux configuration file is added. A small U-Boot config fragment allows to disable the watchdog, so that userspace by default doesn't need to have a watchdog daemon running. The vendor U-Boot and Linux trees are used for the moment, but the platform support is being upstreamed, so switching to upstream versions will be possible in the relatively near future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-08-07 22:24:56 +08:00
BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp157c-dk2"
BR2_PACKAGE_HOST_GENIMAGE=y
Reference in New Issue Copy Permalink