mirrors/buildroot
0
0
Fork 0
mirror of https://git.busybox.net/buildroot.git synced 2024-11-23 13:33:28 +08:00
Code Issues Packages Projects Releases Wiki Activity
7d358fe180
buildroot/configs/sipeed_maix_dock_defconfig

23 lines
760 B
Plaintext
Raw Normal View History

board: Add Sipeed MAIX-Dock board support Add two buildroot configuration files to build a minimal Linux environment for the Sipeed MAIX-Dock board. The configurations are: * sipeed_maix_dock_defconfig: Build a bootable kernel image with an embedded initramfs root file system. The image built can be flashed to the board as is and does not require a boot loader. This configuration uses the tiny busybox configuration defined in board/canaan/k210-soc/busybox-tiny.config. * sipeed_maix_dock_sdcard_defconfig: Build a kernel image with a root file system on the SD card and using U-Boot as the boot loader. This uses the default busybox minimal configuration. Both configurations also enable the kflash and pyserial-miniterm host tools for flashing image files to the board and opening a terminal console. The readme.txt file documents how to build and boot the Sipeed MAIX-Dock board with these configurations. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-07-20 10:45:29 +08:00
BR2_riscv=y
BR2_riscv_custom=y
arch/Config.in.riscv: allow extensions for generic The generic extension set 'G' is realy a base with the minimal set of extensions needed to be comfortable (but not required) to run a linux-bassed system. Similarly, we consider the custom to be about the custom set of features (not about a custom core implementing such a set). As such, we allow that a core with the G set can have futher extensions without requiring it to be configured as a custom set. We drop the intermediate symbols with the prompts, and move the prompts to the previously hidden symbols, and add a prompt for the I set. This alows one to clearly see what the generic set is about, without having to delve into the help and hunt the list of selected symbol. Note however that the G set implies Zicsr and Zifencei, but we have no prompt for thos two, because in Buildroot, we assume that they are mandatory and always present, like the I set (which they previously were part of). Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com> [yann.morin.1998@free.fr: - drop the intermediate symbols - move prompt to previously hidden symbols - add symbol for I - update defconfigs - reword the commit log accordingly ] Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2023-08-18 18:42:59 +08:00
BR2_RISCV_ISA_RVM=y
BR2_RISCV_ISA_RVA=y
BR2_RISCV_ISA_RVF=y
BR2_RISCV_ISA_RVD=y
BR2_RISCV_ISA_RVC=y
arch: rework MMU option handling and move to "Target architecture" menu The MMU option is currently located in the "Toolchain" menu, but it doesn't make sense as it's really architecture related. In addition, the selection of MMU has an impact on the choice of binary format available, which is visible in the architecture menu. Therefore, this commit moves the MMU option into the architecture menu. However, if we simply move it in arch/Config.in, it means that we would have the following order of options: Target architecture Target architecture variant ABI MMU Binary format But really, the MMU option should be right below the Target architecture variant, and the available ABIs derived from that. The variant and ABI are arch-specfic, and defined in the per-arch Config.in fragments; a Kconfig option can have only one prompt defined, even under conditions, and appears at the place in the menu where its prompt was defined. So, there is no (easy) possibility to have a generic option appear where we want it. Since in fact only 2 architectures show a visible prompt for the MMU option (RISC-V and Xtensa), we move this option in arch/Config.in.riscv and arch/Config.in.xtensa. Some walkthrough the commit: - BR2_ARCH_HAS_MMU_MANDATORY and BR2_ARCH_HAS_MMU_OPTIONAL are removed as they are no longer needed - BR2_USE_MMU becomes a hidden boolean - All the places where we used to select BR2_ARCH_HAS_MMU_MANDATORY now select BR2_USE_MMU directly. - Introduce BR2_RISCV_USE_MMU and BR2_XTENSA_USE_MMU. - All defconfigs that used "# BR2_USE_MMU is not set" are switched to using the new option. All in all, this simplifies things quite a bit, and allows to have a good option ordering in the Target architecture menu. This commit might raise a concern in terms of backward compatibility with existing configurations. The only configurations that will be broken by this change are RISC-V noMMU (which was very recently introduced) and Xtensa noMMU (which we can probably agree is not such a widely popular configuration). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> [yann.morin.1998@free.fr: - expand further why we need per-arch MMU options ] Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2022-07-27 00:39:51 +08:00
# BR2_RISCV_USE_MMU is not set
configs/{canaan, sipeed_maix}*: specify kernel headers version The defconfigs use a 5.19 kernel, so specify 5.19 kernel headers now that is available. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-10-05 03:50:37 +08:00
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y
configs: regenerate all defconfigs During the hackathon in Vienna, it was decided [0] to stop requiring annotated defconfig files, and that they should all be regenerated. This commit does just that. This is a mechanical change, achieved by running (the defcfg script is repriducedc at the end of the commit log): $ for cfg in configs/*_defconfig; do ./defcfg "${cfg##*/}" || break done Out of our 302 defconfig files, only 247 needed regenerating, which means that about 1 in 5 was already not providing the requested annotations. To be noted: three defconfig files had duplicate definitions, which this commit resolves: nitrogen6sx_defconfig nitrogen7_defconfig olimex_a33_olinuxino_defconfig warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS [0] https://elinux.org/Buildroot:DeveloperDaysELCE2024#Rules_for_defconfigs Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr> Cc: Edgar Bonet <bonet@grenoble.cnrs.fr> Signed-off-by: Arnout Vandecappelle <arnout@mind.be> ==== Below is the script to reproduce the commmit. What it does is regenerate the configuration first, then applies a patch to update kernel headers to 3.11, and then recalls the defconfig again, and finally verifies that the 3.11 headers are not selected (and ignores whether the latest are selected or not): we want to catch whether defconfig that were using 3.10, currently the latest we support, would stioll get those headers after we regeerate those. --->8------>8------>8------>8------>8--- #!/bin/sh cfg="${1}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in make "${cfg}" make savedefconfig patch -p1 <<_EOF_ diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 2ae4077ffe..e669f89267 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -129,8 +129,12 @@ choice If your kernel headers are more recent than the latest version in the choice, then select the latest version. +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11 + bool "6.11.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10 - bool "6.10.x or later" + bool "6.10.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9 diff --git a/toolchain/Config.in b/toolchain/Config.in index 6e91ab756c..c2522aca7f 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -656,6 +656,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 bool select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 + +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 select BR2_TOOLCHAIN_HEADERS_LATEST # This should be selected by the latest version, above, to indicate that @@ -669,6 +673,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "6.11" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 default "6.10" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 default "6.9" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 default "6.8" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_8 _EOF_ make "${cfg}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in diff="$( diff -I '_6_11\|BR2_TOOLCHAIN_HEADERS_LATEST=y' -du \ <( tail -n +5 .config.old ) \ <( tail -n +5 .config ) )" if [ "${diff}" ]; then printf 'Not idempotent for "%s"\n' "${cfg}" >&2 exit 1 fi ---8<------8<------8<------8<------8<--- ==== To verify that no other changes are made to the defconfigs that are risky when the defaults change, we ran the following simple script (where buildroot-prev is a checkout just before this commit). It shows that there are many settings removed because they are default, but none of them run the same risk that the default is going to be changed in the future. for i in configs/*_defconfig; do diff="$(diffconfig ../buildroot-next/$i $i)" if [ -n "$diff" ]; then echo "==> $i" echo "$diff" echo fi done --->8------>8------>8------>8------>8--- ==> configs/aarch64_efi_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/acmesystems_aria_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_aria_g25_256mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_256mb_defconfig -BR2_arm926t y ==> configs/amarula_vyasa_rk3288_defconfig -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/armadeus_apf27_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf28_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf51_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/aspeed_ast2600evb_defconfig -BR2_ARM_FPU_VFPV4D16 y ==> configs/asus_tinker-s_rk3288_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/at91sam9260eknf_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9g20dfc_defconfig -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_ROOTFS_UBIFS y -BR2_TARGET_ROOTFS_UBIFS_LEBSIZE 0x1f800 -BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE 0x800 -BR2_TARGET_ROOTFS_UBI_PEBSIZE 0x20000 -BR2_TARGET_ROOTFS_UBI_SUBSIZE 512 -BR2_arm926t y ==> configs/at91sam9g45m10ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9rlek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_defconfig -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_dev_defconfig -BR2_arm926t y ==> configs/atmel_sama5d3_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3xek_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/bananapi_m2_ultra_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/bananapro_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/beaglebone_qt5_defconfig -BR2_PACKAGE_TI_SGX_KM y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/beagleboneai64_defconfig -BR2_TARGET_TI_K3_BOOT_FIRMWARE y -BR2_TARGET_UBOOT_NEEDS_PYLIBFDT y ==> configs/beelink_gs1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/canaan_kd233_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/ci20_defconfig -BR2_KERNEL_HEADERS_AS_KERNEL y -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_SPL_NAME "spl/u-boot-spl.bin" ==> configs/cubieboard2_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/freescale_imx28evk_defconfig -BR2_arm926t y ==> configs/friendlyarm_nanopi_r2s_defconfig -BR2_cortex_a53 y ==> configs/globalscale_espressobin_defconfig -BR2_cortex_a53 y ==> configs/hifive_unleashed_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_GENERIC_GETTY y ==> configs/imx23evk_defconfig -BR2_arm926t y ==> configs/imxrt1050-evk_defconfig -BR2_LINUX_KERNEL_ZIMAGE y ==> configs/khadas_vim3_defconfig -BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE "khadas-vim3" ==> configs/kontron_bl_imx8mm_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/kontron_pitx_imx8m_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/kontron_smarc_sal28_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/lafrite_defconfig -BR2_cortex_a53 y ==> configs/lego_ev3_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_arm926t y ==> configs/linksprite_pcduino_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/ls1046a-frwy_defconfig -BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM "ls1046" ==> configs/mx6cubox_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/nexbox_a95x_defconfig -BR2_cortex_a53 y ==> configs/nitrogen6sx_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen6x_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen7_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen8m_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mm_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mn_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mp_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/odroidc2_defconfig -BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY y ==> configs/olimex_a10_olinuxino_lime_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a13_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a20_olinuxino_lime2_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_lime_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_micro_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a33_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a64_olinuxino_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/olimex_imx233_olinuxino_defconfig -BR2_arm926t y ==> configs/openblocks_a6_defconfig -BR2_arm926t y ==> configs/orangepi_lite2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_one_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_one_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_pc_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_pc_plus_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_r1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero2w_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero3_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero_plus2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/pine64_defconfig -BR2_cortex_a53 y ==> configs/pine64_sopine_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/qemu_aarch64_sbsa_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/qemu_aarch64_virt_defconfig -BR2_cortex_a53 y ==> configs/qemu_arm_versatile_defconfig -BR2_arm926t y ==> configs/qemu_arm_vexpress_defconfig -BR2_ARM_FPU_VFPV3D16 y ==> configs/qemu_arm_vexpress_tz_defconfig -BR2_PACKAGE_LIBOPENSSL y ==> configs/qemu_m68k_mcf5208_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_m68k_q800_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y -BR2_m68k_68040 y ==> configs/qemu_microblazebe_mmu_defconfig -BR2_microblaze y ==> configs/qemu_microblazeel_mmu_defconfig -BR2_microblaze y ==> configs/qemu_mips32r2_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r2el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc64le_powernv8_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc64le_pseries_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc_bamboo_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_g3beige_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_mpc8544ds_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_sh4_r2d_defconfig -BR2_sh4 y ==> configs/qemu_sparc64_sun4u_defconfig -BR2_sparc_v9 y ==> configs/qemu_sparc_ss10_defconfig -BR2_sparc_v8 y ==> configs/qemu_x86_defconfig -BR2_i386 y ==> configs/raspberrypi0_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi0w_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi2_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi3_64_defconfig -BR2_cortex_a53 y ==> configs/raspberrypi3_qt5we_defconfig -BR2_PACKAGE_KMOD y -BR2_PACKAGE_QT5BASE_JPEG y -BR2_PACKAGE_QT5BASE_PNG y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/raspberrypi_defconfig -BR2_ARM_EABIHF y ==> configs/riotboard_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/rock64_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rock_pi_n8_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rockpro64_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/s6lx9_microboard_defconfig -BR2_microblaze y ==> configs/sheevaplug_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NETWORK n -BR2_arm926t y ==> configs/sipeed_maix_bit_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_bit_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_dock_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_dock_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_go_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_go_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maixduino_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maixduino_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/snps_archs38_hsdk_defconfig -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/solidrun_clearfog_gt_8k_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n ==> configs/solidrun_macchiatobin_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_UBOOT_USE_DEFCONFIG y ==> configs/spike_riscv64_defconfig -BR2_RISCV_64 y ==> configs/ts5500_defconfig -BR2_i386 y -BR2_x86_i586 y ==> configs/versal_vck190_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/versal_vpk180_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kd240_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kr260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kv260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu102_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu104_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu106_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ---8<------8<------8<------8<------8<---
2024-09-22 00:32:59 +08:00
BR2_INIT_TINYINIT=y
board: Add Sipeed MAIX-Dock board support Add two buildroot configuration files to build a minimal Linux environment for the Sipeed MAIX-Dock board. The configurations are: * sipeed_maix_dock_defconfig: Build a bootable kernel image with an embedded initramfs root file system. The image built can be flashed to the board as is and does not require a boot loader. This configuration uses the tiny busybox configuration defined in board/canaan/k210-soc/busybox-tiny.config. * sipeed_maix_dock_sdcard_defconfig: Build a kernel image with a root file system on the SD card and using U-Boot as the boot loader. This uses the default busybox minimal configuration. Both configurations also enable the kflash and pyserial-miniterm host tools for flashing image files to the board and opening a terminal console. The readme.txt file documents how to build and boot the Sipeed MAIX-Dock board with these configurations. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-07-20 10:45:29 +08:00
# BR2_TARGET_ENABLE_ROOT_LOGIN is not set
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
board/riscv/nommu: bump kernel version and drop no longer needed patch Bump the kernel version for all riscv nommu configs from 5.18 to 5.19. That way, we can remove the one and only riscv nommu patch, since this patch is included in kernel 5.19. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-08-10 19:50:55 +08:00
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19"
board: Add Sipeed MAIX-Dock board support Add two buildroot configuration files to build a minimal Linux environment for the Sipeed MAIX-Dock board. The configurations are: * sipeed_maix_dock_defconfig: Build a bootable kernel image with an embedded initramfs root file system. The image built can be flashed to the board as is and does not require a boot loader. This configuration uses the tiny busybox configuration defined in board/canaan/k210-soc/busybox-tiny.config. * sipeed_maix_dock_sdcard_defconfig: Build a kernel image with a root file system on the SD card and using U-Boot as the boot loader. This uses the default busybox minimal configuration. Both configurations also enable the kflash and pyserial-miniterm host tools for flashing image files to the board and opening a terminal console. The readme.txt file documents how to build and boot the Sipeed MAIX-Dock board with these configurations. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2022-07-20 10:45:29 +08:00
BR2_LINUX_KERNEL_DEFCONFIG="nommu_k210"
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/sipeed/maix-dock/linux-cpio.config"
BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
BR2_LINUX_KERNEL_IMAGE_NAME="loader.bin"
BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES="board/canaan/k210-soc/busybox-tiny.config"
# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
configs: regenerate all defconfigs During the hackathon in Vienna, it was decided [0] to stop requiring annotated defconfig files, and that they should all be regenerated. This commit does just that. This is a mechanical change, achieved by running (the defcfg script is repriducedc at the end of the commit log): $ for cfg in configs/*_defconfig; do ./defcfg "${cfg##*/}" || break done Out of our 302 defconfig files, only 247 needed regenerating, which means that about 1 in 5 was already not providing the requested annotations. To be noted: three defconfig files had duplicate definitions, which this commit resolves: nitrogen6sx_defconfig nitrogen7_defconfig olimex_a33_olinuxino_defconfig warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS [0] https://elinux.org/Buildroot:DeveloperDaysELCE2024#Rules_for_defconfigs Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr> Cc: Edgar Bonet <bonet@grenoble.cnrs.fr> Signed-off-by: Arnout Vandecappelle <arnout@mind.be> ==== Below is the script to reproduce the commmit. What it does is regenerate the configuration first, then applies a patch to update kernel headers to 3.11, and then recalls the defconfig again, and finally verifies that the 3.11 headers are not selected (and ignores whether the latest are selected or not): we want to catch whether defconfig that were using 3.10, currently the latest we support, would stioll get those headers after we regeerate those. --->8------>8------>8------>8------>8--- #!/bin/sh cfg="${1}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in make "${cfg}" make savedefconfig patch -p1 <<_EOF_ diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 2ae4077ffe..e669f89267 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -129,8 +129,12 @@ choice If your kernel headers are more recent than the latest version in the choice, then select the latest version. +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11 + bool "6.11.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10 - bool "6.10.x or later" + bool "6.10.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9 diff --git a/toolchain/Config.in b/toolchain/Config.in index 6e91ab756c..c2522aca7f 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -656,6 +656,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 bool select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 + +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 select BR2_TOOLCHAIN_HEADERS_LATEST # This should be selected by the latest version, above, to indicate that @@ -669,6 +673,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "6.11" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 default "6.10" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 default "6.9" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 default "6.8" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_8 _EOF_ make "${cfg}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in diff="$( diff -I '_6_11\|BR2_TOOLCHAIN_HEADERS_LATEST=y' -du \ <( tail -n +5 .config.old ) \ <( tail -n +5 .config ) )" if [ "${diff}" ]; then printf 'Not idempotent for "%s"\n' "${cfg}" >&2 exit 1 fi ---8<------8<------8<------8<------8<--- ==== To verify that no other changes are made to the defconfigs that are risky when the defaults change, we ran the following simple script (where buildroot-prev is a checkout just before this commit). It shows that there are many settings removed because they are default, but none of them run the same risk that the default is going to be changed in the future. for i in configs/*_defconfig; do diff="$(diffconfig ../buildroot-next/$i $i)" if [ -n "$diff" ]; then echo "==> $i" echo "$diff" echo fi done --->8------>8------>8------>8------>8--- ==> configs/aarch64_efi_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/acmesystems_aria_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_aria_g25_256mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_256mb_defconfig -BR2_arm926t y ==> configs/amarula_vyasa_rk3288_defconfig -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/armadeus_apf27_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf28_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf51_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/aspeed_ast2600evb_defconfig -BR2_ARM_FPU_VFPV4D16 y ==> configs/asus_tinker-s_rk3288_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/at91sam9260eknf_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9g20dfc_defconfig -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_ROOTFS_UBIFS y -BR2_TARGET_ROOTFS_UBIFS_LEBSIZE 0x1f800 -BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE 0x800 -BR2_TARGET_ROOTFS_UBI_PEBSIZE 0x20000 -BR2_TARGET_ROOTFS_UBI_SUBSIZE 512 -BR2_arm926t y ==> configs/at91sam9g45m10ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9rlek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_defconfig -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_dev_defconfig -BR2_arm926t y ==> configs/atmel_sama5d3_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3xek_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/bananapi_m2_ultra_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/bananapro_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/beaglebone_qt5_defconfig -BR2_PACKAGE_TI_SGX_KM y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/beagleboneai64_defconfig -BR2_TARGET_TI_K3_BOOT_FIRMWARE y -BR2_TARGET_UBOOT_NEEDS_PYLIBFDT y ==> configs/beelink_gs1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/canaan_kd233_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/ci20_defconfig -BR2_KERNEL_HEADERS_AS_KERNEL y -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_SPL_NAME "spl/u-boot-spl.bin" ==> configs/cubieboard2_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/freescale_imx28evk_defconfig -BR2_arm926t y ==> configs/friendlyarm_nanopi_r2s_defconfig -BR2_cortex_a53 y ==> configs/globalscale_espressobin_defconfig -BR2_cortex_a53 y ==> configs/hifive_unleashed_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_GENERIC_GETTY y ==> configs/imx23evk_defconfig -BR2_arm926t y ==> configs/imxrt1050-evk_defconfig -BR2_LINUX_KERNEL_ZIMAGE y ==> configs/khadas_vim3_defconfig -BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE "khadas-vim3" ==> configs/kontron_bl_imx8mm_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/kontron_pitx_imx8m_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/kontron_smarc_sal28_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/lafrite_defconfig -BR2_cortex_a53 y ==> configs/lego_ev3_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_arm926t y ==> configs/linksprite_pcduino_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/ls1046a-frwy_defconfig -BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM "ls1046" ==> configs/mx6cubox_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/nexbox_a95x_defconfig -BR2_cortex_a53 y ==> configs/nitrogen6sx_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen6x_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen7_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen8m_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mm_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mn_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mp_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/odroidc2_defconfig -BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY y ==> configs/olimex_a10_olinuxino_lime_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a13_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a20_olinuxino_lime2_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_lime_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_micro_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a33_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a64_olinuxino_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/olimex_imx233_olinuxino_defconfig -BR2_arm926t y ==> configs/openblocks_a6_defconfig -BR2_arm926t y ==> configs/orangepi_lite2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_one_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_one_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_pc_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_pc_plus_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_r1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero2w_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero3_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero_plus2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/pine64_defconfig -BR2_cortex_a53 y ==> configs/pine64_sopine_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/qemu_aarch64_sbsa_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/qemu_aarch64_virt_defconfig -BR2_cortex_a53 y ==> configs/qemu_arm_versatile_defconfig -BR2_arm926t y ==> configs/qemu_arm_vexpress_defconfig -BR2_ARM_FPU_VFPV3D16 y ==> configs/qemu_arm_vexpress_tz_defconfig -BR2_PACKAGE_LIBOPENSSL y ==> configs/qemu_m68k_mcf5208_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_m68k_q800_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y -BR2_m68k_68040 y ==> configs/qemu_microblazebe_mmu_defconfig -BR2_microblaze y ==> configs/qemu_microblazeel_mmu_defconfig -BR2_microblaze y ==> configs/qemu_mips32r2_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r2el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc64le_powernv8_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc64le_pseries_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc_bamboo_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_g3beige_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_mpc8544ds_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_sh4_r2d_defconfig -BR2_sh4 y ==> configs/qemu_sparc64_sun4u_defconfig -BR2_sparc_v9 y ==> configs/qemu_sparc_ss10_defconfig -BR2_sparc_v8 y ==> configs/qemu_x86_defconfig -BR2_i386 y ==> configs/raspberrypi0_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi0w_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi2_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi3_64_defconfig -BR2_cortex_a53 y ==> configs/raspberrypi3_qt5we_defconfig -BR2_PACKAGE_KMOD y -BR2_PACKAGE_QT5BASE_JPEG y -BR2_PACKAGE_QT5BASE_PNG y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/raspberrypi_defconfig -BR2_ARM_EABIHF y ==> configs/riotboard_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/rock64_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rock_pi_n8_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rockpro64_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/s6lx9_microboard_defconfig -BR2_microblaze y ==> configs/sheevaplug_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NETWORK n -BR2_arm926t y ==> configs/sipeed_maix_bit_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_bit_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_dock_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_dock_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_go_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_go_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maixduino_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maixduino_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/snps_archs38_hsdk_defconfig -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/solidrun_clearfog_gt_8k_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n ==> configs/solidrun_macchiatobin_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_UBOOT_USE_DEFCONFIG y ==> configs/spike_riscv64_defconfig -BR2_RISCV_64 y ==> configs/ts5500_defconfig -BR2_i386 y -BR2_x86_i586 y ==> configs/versal_vck190_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/versal_vpk180_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kd240_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kr260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kv260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu102_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu104_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu106_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ---8<------8<------8<------8<------8<---
2024-09-22 00:32:59 +08:00
BR2_PACKAGE_HOST_PYTHON_KFLASH=y
Reference in New Issue Copy Permalink