mirrors/buildroot
0
0
Fork 0
mirror of https://git.busybox.net/buildroot.git synced 2024-11-26 23:13:27 +08:00
Code Issues Packages Projects Releases Wiki Activity
master
buildroot/configs/imxrt1050-evk_defconfig

28 lines
987 B
Plaintext
Raw Permalink Normal View History

configs/imxrt1050-evk: new defconfig Add defconfig for imxrt1050-evk is a development board from NXP. The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz up to the latter with i.MXRT1170 with cortex-M7@1Ghz and cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing that these chips are comparable to the STM32F7xxs which have Buildroot ported to them it seems reasonable to add support for them. https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-01-03 02:16:03 +08:00
BR2_arm=y
BR2_cortex_m7=y
configs: regenerate all defconfigs During the hackathon in Vienna, it was decided [0] to stop requiring annotated defconfig files, and that they should all be regenerated. This commit does just that. This is a mechanical change, achieved by running (the defcfg script is repriducedc at the end of the commit log): $ for cfg in configs/*_defconfig; do ./defcfg "${cfg##*/}" || break done Out of our 302 defconfig files, only 247 needed regenerating, which means that about 1 in 5 was already not providing the requested annotations. To be noted: three defconfig files had duplicate definitions, which this commit resolves: nitrogen6sx_defconfig nitrogen7_defconfig olimex_a33_olinuxino_defconfig warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS [0] https://elinux.org/Buildroot:DeveloperDaysELCE2024#Rules_for_defconfigs Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr> Cc: Edgar Bonet <bonet@grenoble.cnrs.fr> Signed-off-by: Arnout Vandecappelle <arnout@mind.be> ==== Below is the script to reproduce the commmit. What it does is regenerate the configuration first, then applies a patch to update kernel headers to 3.11, and then recalls the defconfig again, and finally verifies that the 3.11 headers are not selected (and ignores whether the latest are selected or not): we want to catch whether defconfig that were using 3.10, currently the latest we support, would stioll get those headers after we regeerate those. --->8------>8------>8------>8------>8--- #!/bin/sh cfg="${1}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in make "${cfg}" make savedefconfig patch -p1 <<_EOF_ diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 2ae4077ffe..e669f89267 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -129,8 +129,12 @@ choice If your kernel headers are more recent than the latest version in the choice, then select the latest version. +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11 + bool "6.11.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10 - bool "6.10.x or later" + bool "6.10.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9 diff --git a/toolchain/Config.in b/toolchain/Config.in index 6e91ab756c..c2522aca7f 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -656,6 +656,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 bool select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 + +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 select BR2_TOOLCHAIN_HEADERS_LATEST # This should be selected by the latest version, above, to indicate that @@ -669,6 +673,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "6.11" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 default "6.10" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 default "6.9" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 default "6.8" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_8 _EOF_ make "${cfg}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in diff="$( diff -I '_6_11\|BR2_TOOLCHAIN_HEADERS_LATEST=y' -du \ <( tail -n +5 .config.old ) \ <( tail -n +5 .config ) )" if [ "${diff}" ]; then printf 'Not idempotent for "%s"\n' "${cfg}" >&2 exit 1 fi ---8<------8<------8<------8<------8<--- ==== To verify that no other changes are made to the defconfigs that are risky when the defaults change, we ran the following simple script (where buildroot-prev is a checkout just before this commit). It shows that there are many settings removed because they are default, but none of them run the same risk that the default is going to be changed in the future. for i in configs/*_defconfig; do diff="$(diffconfig ../buildroot-next/$i $i)" if [ -n "$diff" ]; then echo "==> $i" echo "$diff" echo fi done --->8------>8------>8------>8------>8--- ==> configs/aarch64_efi_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/acmesystems_aria_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_aria_g25_256mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_256mb_defconfig -BR2_arm926t y ==> configs/amarula_vyasa_rk3288_defconfig -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/armadeus_apf27_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf28_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf51_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/aspeed_ast2600evb_defconfig -BR2_ARM_FPU_VFPV4D16 y ==> configs/asus_tinker-s_rk3288_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/at91sam9260eknf_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9g20dfc_defconfig -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_ROOTFS_UBIFS y -BR2_TARGET_ROOTFS_UBIFS_LEBSIZE 0x1f800 -BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE 0x800 -BR2_TARGET_ROOTFS_UBI_PEBSIZE 0x20000 -BR2_TARGET_ROOTFS_UBI_SUBSIZE 512 -BR2_arm926t y ==> configs/at91sam9g45m10ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9rlek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_defconfig -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_dev_defconfig -BR2_arm926t y ==> configs/atmel_sama5d3_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3xek_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/bananapi_m2_ultra_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/bananapro_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/beaglebone_qt5_defconfig -BR2_PACKAGE_TI_SGX_KM y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/beagleboneai64_defconfig -BR2_TARGET_TI_K3_BOOT_FIRMWARE y -BR2_TARGET_UBOOT_NEEDS_PYLIBFDT y ==> configs/beelink_gs1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/canaan_kd233_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/ci20_defconfig -BR2_KERNEL_HEADERS_AS_KERNEL y -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_SPL_NAME "spl/u-boot-spl.bin" ==> configs/cubieboard2_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/freescale_imx28evk_defconfig -BR2_arm926t y ==> configs/friendlyarm_nanopi_r2s_defconfig -BR2_cortex_a53 y ==> configs/globalscale_espressobin_defconfig -BR2_cortex_a53 y ==> configs/hifive_unleashed_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_GENERIC_GETTY y ==> configs/imx23evk_defconfig -BR2_arm926t y ==> configs/imxrt1050-evk_defconfig -BR2_LINUX_KERNEL_ZIMAGE y ==> configs/khadas_vim3_defconfig -BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE "khadas-vim3" ==> configs/kontron_bl_imx8mm_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/kontron_pitx_imx8m_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/kontron_smarc_sal28_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/lafrite_defconfig -BR2_cortex_a53 y ==> configs/lego_ev3_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_arm926t y ==> configs/linksprite_pcduino_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/ls1046a-frwy_defconfig -BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM "ls1046" ==> configs/mx6cubox_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/nexbox_a95x_defconfig -BR2_cortex_a53 y ==> configs/nitrogen6sx_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen6x_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen7_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen8m_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mm_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mn_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mp_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/odroidc2_defconfig -BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY y ==> configs/olimex_a10_olinuxino_lime_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a13_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a20_olinuxino_lime2_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_lime_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_micro_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a33_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a64_olinuxino_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/olimex_imx233_olinuxino_defconfig -BR2_arm926t y ==> configs/openblocks_a6_defconfig -BR2_arm926t y ==> configs/orangepi_lite2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_one_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_one_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_pc_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_pc_plus_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_r1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero2w_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero3_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero_plus2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/pine64_defconfig -BR2_cortex_a53 y ==> configs/pine64_sopine_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/qemu_aarch64_sbsa_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/qemu_aarch64_virt_defconfig -BR2_cortex_a53 y ==> configs/qemu_arm_versatile_defconfig -BR2_arm926t y ==> configs/qemu_arm_vexpress_defconfig -BR2_ARM_FPU_VFPV3D16 y ==> configs/qemu_arm_vexpress_tz_defconfig -BR2_PACKAGE_LIBOPENSSL y ==> configs/qemu_m68k_mcf5208_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_m68k_q800_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y -BR2_m68k_68040 y ==> configs/qemu_microblazebe_mmu_defconfig -BR2_microblaze y ==> configs/qemu_microblazeel_mmu_defconfig -BR2_microblaze y ==> configs/qemu_mips32r2_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r2el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc64le_powernv8_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc64le_pseries_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc_bamboo_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_g3beige_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_mpc8544ds_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_sh4_r2d_defconfig -BR2_sh4 y ==> configs/qemu_sparc64_sun4u_defconfig -BR2_sparc_v9 y ==> configs/qemu_sparc_ss10_defconfig -BR2_sparc_v8 y ==> configs/qemu_x86_defconfig -BR2_i386 y ==> configs/raspberrypi0_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi0w_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi2_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi3_64_defconfig -BR2_cortex_a53 y ==> configs/raspberrypi3_qt5we_defconfig -BR2_PACKAGE_KMOD y -BR2_PACKAGE_QT5BASE_JPEG y -BR2_PACKAGE_QT5BASE_PNG y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/raspberrypi_defconfig -BR2_ARM_EABIHF y ==> configs/riotboard_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/rock64_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rock_pi_n8_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rockpro64_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/s6lx9_microboard_defconfig -BR2_microblaze y ==> configs/sheevaplug_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NETWORK n -BR2_arm926t y ==> configs/sipeed_maix_bit_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_bit_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_dock_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_dock_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_go_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_go_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maixduino_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maixduino_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/snps_archs38_hsdk_defconfig -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/solidrun_clearfog_gt_8k_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n ==> configs/solidrun_macchiatobin_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_UBOOT_USE_DEFCONFIG y ==> configs/spike_riscv64_defconfig -BR2_RISCV_64 y ==> configs/ts5500_defconfig -BR2_i386 y -BR2_x86_i586 y ==> configs/versal_vck190_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/versal_vpk180_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kd240_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kr260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kv260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu102_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu104_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu106_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ---8<------8<------8<------8<------8<---
2024-09-22 00:32:59 +08:00
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_7=y
configs/imxrt1050-evk: new defconfig Add defconfig for imxrt1050-evk is a development board from NXP. The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz up to the latter with i.MXRT1170 with cortex-M7@1Ghz and cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing that these chips are comparable to the STM32F7xxs which have Buildroot ported to them it seems reasonable to add support for them. https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-01-03 02:16:03 +08:00
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/imxrt1050evk/genimage.cfg"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
configs/imxrt1050-evk: Bump Kernel and U-boot Bump Linux to 6.7 and U-Boot to 2024.01 Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2024-01-09 22:11:31 +08:00
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.7"
configs/imxrt1050-evk: new defconfig Add defconfig for imxrt1050-evk is a development board from NXP. The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz up to the latter with i.MXRT1170 with cortex-M7@1Ghz and cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing that these chips are comparable to the STM32F7xxs which have Buildroot ported to them it seems reasonable to add support for them. https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-01-03 02:16:03 +08:00
BR2_LINUX_KERNEL_DEFCONFIG="imxrt"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
configs/imxrt1050-evk: Bump Kernel and U-boot Bump Linux to 6.7 and U-Boot to 2024.01 Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2024-01-09 22:11:31 +08:00
BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imxrt1050-evk"
configs/imxrt1050-evk: new defconfig Add defconfig for imxrt1050-evk is a development board from NXP. The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz up to the latter with i.MXRT1170 with cortex-M7@1Ghz and cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing that these chips are comparable to the STM32F7xxs which have Buildroot ported to them it seems reasonable to add support for them. https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-01-03 02:16:03 +08:00
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="16M"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
configs/imxrt1050-evk: Bump Kernel and U-boot Bump Linux to 6.7 and U-Boot to 2024.01 Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2024-01-09 22:11:31 +08:00
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01"
configs/imxrt1050-evk: new defconfig Add defconfig for imxrt1050-evk is a development board from NXP. The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz up to the latter with i.MXRT1170 with cortex-M7@1Ghz and cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing that these chips are comparable to the STM32F7xxs which have Buildroot ported to them it seems reasonable to add support for them. https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-01-03 02:16:03 +08:00
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imxrt1050-evk"
BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/freescale/imxrt1050evk/uboot.fragment"
configs: regenerate all defconfigs During the hackathon in Vienna, it was decided [0] to stop requiring annotated defconfig files, and that they should all be regenerated. This commit does just that. This is a mechanical change, achieved by running (the defcfg script is repriducedc at the end of the commit log): $ for cfg in configs/*_defconfig; do ./defcfg "${cfg##*/}" || break done Out of our 302 defconfig files, only 247 needed regenerating, which means that about 1 in 5 was already not providing the requested annotations. To be noted: three defconfig files had duplicate definitions, which this commit resolves: nitrogen6sx_defconfig nitrogen7_defconfig olimex_a33_olinuxino_defconfig warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS [0] https://elinux.org/Buildroot:DeveloperDaysELCE2024#Rules_for_defconfigs Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr> Cc: Edgar Bonet <bonet@grenoble.cnrs.fr> Signed-off-by: Arnout Vandecappelle <arnout@mind.be> ==== Below is the script to reproduce the commmit. What it does is regenerate the configuration first, then applies a patch to update kernel headers to 3.11, and then recalls the defconfig again, and finally verifies that the 3.11 headers are not selected (and ignores whether the latest are selected or not): we want to catch whether defconfig that were using 3.10, currently the latest we support, would stioll get those headers after we regeerate those. --->8------>8------>8------>8------>8--- #!/bin/sh cfg="${1}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in make "${cfg}" make savedefconfig patch -p1 <<_EOF_ diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 2ae4077ffe..e669f89267 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -129,8 +129,12 @@ choice If your kernel headers are more recent than the latest version in the choice, then select the latest version. +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11 + bool "6.11.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10 - bool "6.10.x or later" + bool "6.10.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9 diff --git a/toolchain/Config.in b/toolchain/Config.in index 6e91ab756c..c2522aca7f 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -656,6 +656,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 bool select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 + +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 select BR2_TOOLCHAIN_HEADERS_LATEST # This should be selected by the latest version, above, to indicate that @@ -669,6 +673,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "6.11" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 default "6.10" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 default "6.9" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 default "6.8" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_8 _EOF_ make "${cfg}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in diff="$( diff -I '_6_11\|BR2_TOOLCHAIN_HEADERS_LATEST=y' -du \ <( tail -n +5 .config.old ) \ <( tail -n +5 .config ) )" if [ "${diff}" ]; then printf 'Not idempotent for "%s"\n' "${cfg}" >&2 exit 1 fi ---8<------8<------8<------8<------8<--- ==== To verify that no other changes are made to the defconfigs that are risky when the defaults change, we ran the following simple script (where buildroot-prev is a checkout just before this commit). It shows that there are many settings removed because they are default, but none of them run the same risk that the default is going to be changed in the future. for i in configs/*_defconfig; do diff="$(diffconfig ../buildroot-next/$i $i)" if [ -n "$diff" ]; then echo "==> $i" echo "$diff" echo fi done --->8------>8------>8------>8------>8--- ==> configs/aarch64_efi_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/acmesystems_aria_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_aria_g25_256mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_256mb_defconfig -BR2_arm926t y ==> configs/amarula_vyasa_rk3288_defconfig -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/armadeus_apf27_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf28_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf51_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/aspeed_ast2600evb_defconfig -BR2_ARM_FPU_VFPV4D16 y ==> configs/asus_tinker-s_rk3288_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/at91sam9260eknf_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9g20dfc_defconfig -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_ROOTFS_UBIFS y -BR2_TARGET_ROOTFS_UBIFS_LEBSIZE 0x1f800 -BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE 0x800 -BR2_TARGET_ROOTFS_UBI_PEBSIZE 0x20000 -BR2_TARGET_ROOTFS_UBI_SUBSIZE 512 -BR2_arm926t y ==> configs/at91sam9g45m10ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9rlek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_defconfig -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_dev_defconfig -BR2_arm926t y ==> configs/atmel_sama5d3_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3xek_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/bananapi_m2_ultra_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/bananapro_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/beaglebone_qt5_defconfig -BR2_PACKAGE_TI_SGX_KM y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/beagleboneai64_defconfig -BR2_TARGET_TI_K3_BOOT_FIRMWARE y -BR2_TARGET_UBOOT_NEEDS_PYLIBFDT y ==> configs/beelink_gs1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/canaan_kd233_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/ci20_defconfig -BR2_KERNEL_HEADERS_AS_KERNEL y -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_SPL_NAME "spl/u-boot-spl.bin" ==> configs/cubieboard2_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/freescale_imx28evk_defconfig -BR2_arm926t y ==> configs/friendlyarm_nanopi_r2s_defconfig -BR2_cortex_a53 y ==> configs/globalscale_espressobin_defconfig -BR2_cortex_a53 y ==> configs/hifive_unleashed_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_GENERIC_GETTY y ==> configs/imx23evk_defconfig -BR2_arm926t y ==> configs/imxrt1050-evk_defconfig -BR2_LINUX_KERNEL_ZIMAGE y ==> configs/khadas_vim3_defconfig -BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE "khadas-vim3" ==> configs/kontron_bl_imx8mm_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/kontron_pitx_imx8m_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/kontron_smarc_sal28_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/lafrite_defconfig -BR2_cortex_a53 y ==> configs/lego_ev3_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_arm926t y ==> configs/linksprite_pcduino_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/ls1046a-frwy_defconfig -BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM "ls1046" ==> configs/mx6cubox_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/nexbox_a95x_defconfig -BR2_cortex_a53 y ==> configs/nitrogen6sx_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen6x_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen7_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen8m_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mm_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mn_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mp_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/odroidc2_defconfig -BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY y ==> configs/olimex_a10_olinuxino_lime_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a13_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a20_olinuxino_lime2_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_lime_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_micro_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a33_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a64_olinuxino_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/olimex_imx233_olinuxino_defconfig -BR2_arm926t y ==> configs/openblocks_a6_defconfig -BR2_arm926t y ==> configs/orangepi_lite2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_one_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_one_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_pc_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_pc_plus_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_r1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero2w_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero3_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero_plus2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/pine64_defconfig -BR2_cortex_a53 y ==> configs/pine64_sopine_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/qemu_aarch64_sbsa_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/qemu_aarch64_virt_defconfig -BR2_cortex_a53 y ==> configs/qemu_arm_versatile_defconfig -BR2_arm926t y ==> configs/qemu_arm_vexpress_defconfig -BR2_ARM_FPU_VFPV3D16 y ==> configs/qemu_arm_vexpress_tz_defconfig -BR2_PACKAGE_LIBOPENSSL y ==> configs/qemu_m68k_mcf5208_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_m68k_q800_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y -BR2_m68k_68040 y ==> configs/qemu_microblazebe_mmu_defconfig -BR2_microblaze y ==> configs/qemu_microblazeel_mmu_defconfig -BR2_microblaze y ==> configs/qemu_mips32r2_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r2el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc64le_powernv8_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc64le_pseries_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc_bamboo_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_g3beige_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_mpc8544ds_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_sh4_r2d_defconfig -BR2_sh4 y ==> configs/qemu_sparc64_sun4u_defconfig -BR2_sparc_v9 y ==> configs/qemu_sparc_ss10_defconfig -BR2_sparc_v8 y ==> configs/qemu_x86_defconfig -BR2_i386 y ==> configs/raspberrypi0_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi0w_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi2_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi3_64_defconfig -BR2_cortex_a53 y ==> configs/raspberrypi3_qt5we_defconfig -BR2_PACKAGE_KMOD y -BR2_PACKAGE_QT5BASE_JPEG y -BR2_PACKAGE_QT5BASE_PNG y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/raspberrypi_defconfig -BR2_ARM_EABIHF y ==> configs/riotboard_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/rock64_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rock_pi_n8_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rockpro64_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/s6lx9_microboard_defconfig -BR2_microblaze y ==> configs/sheevaplug_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NETWORK n -BR2_arm926t y ==> configs/sipeed_maix_bit_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_bit_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_dock_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_dock_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_go_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_go_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maixduino_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maixduino_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/snps_archs38_hsdk_defconfig -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/solidrun_clearfog_gt_8k_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n ==> configs/solidrun_macchiatobin_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_UBOOT_USE_DEFCONFIG y ==> configs/spike_riscv64_defconfig -BR2_RISCV_64 y ==> configs/ts5500_defconfig -BR2_i386 y -BR2_x86_i586 y ==> configs/versal_vck190_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/versal_vpk180_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kd240_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kr260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kv260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu102_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu104_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu106_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ---8<------8<------8<------8<------8<---
2024-09-22 00:32:59 +08:00
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
configs/imxrt1050-evk: new defconfig Add defconfig for imxrt1050-evk is a development board from NXP. The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz up to the latter with i.MXRT1170 with cortex-M7@1Ghz and cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing that these chips are comparable to the STM32F7xxs which have Buildroot ported to them it seems reasonable to add support for them. https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-01-03 02:16:03 +08:00
BR2_TARGET_UBOOT_FORMAT_IMG=y
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="SPL"
BR2_PACKAGE_HOST_DOSFSTOOLS=y
configs: regenerate all defconfigs During the hackathon in Vienna, it was decided [0] to stop requiring annotated defconfig files, and that they should all be regenerated. This commit does just that. This is a mechanical change, achieved by running (the defcfg script is repriducedc at the end of the commit log): $ for cfg in configs/*_defconfig; do ./defcfg "${cfg##*/}" || break done Out of our 302 defconfig files, only 247 needed regenerating, which means that about 1 in 5 was already not providing the requested annotations. To be noted: three defconfig files had duplicate definitions, which this commit resolves: nitrogen6sx_defconfig nitrogen7_defconfig olimex_a33_olinuxino_defconfig warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS [0] https://elinux.org/Buildroot:DeveloperDaysELCE2024#Rules_for_defconfigs Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr> Cc: Edgar Bonet <bonet@grenoble.cnrs.fr> Signed-off-by: Arnout Vandecappelle <arnout@mind.be> ==== Below is the script to reproduce the commmit. What it does is regenerate the configuration first, then applies a patch to update kernel headers to 3.11, and then recalls the defconfig again, and finally verifies that the 3.11 headers are not selected (and ignores whether the latest are selected or not): we want to catch whether defconfig that were using 3.10, currently the latest we support, would stioll get those headers after we regeerate those. --->8------>8------>8------>8------>8--- #!/bin/sh cfg="${1}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in make "${cfg}" make savedefconfig patch -p1 <<_EOF_ diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host index 2ae4077ffe..e669f89267 100644 --- a/package/linux-headers/Config.in.host +++ b/package/linux-headers/Config.in.host @@ -129,8 +129,12 @@ choice If your kernel headers are more recent than the latest version in the choice, then select the latest version. +config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11 + bool "6.11.x or later" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10 - bool "6.10.x or later" + bool "6.10.x" select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9 diff --git a/toolchain/Config.in b/toolchain/Config.in index 6e91ab756c..c2522aca7f 100644 --- a/toolchain/Config.in +++ b/toolchain/Config.in @@ -656,6 +656,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 bool select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 + +config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 select BR2_TOOLCHAIN_HEADERS_LATEST # This should be selected by the latest version, above, to indicate that @@ -669,6 +673,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST # stops affecting a value on the first matching default. config BR2_TOOLCHAIN_HEADERS_AT_LEAST string + default "6.11" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11 default "6.10" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10 default "6.9" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9 default "6.8" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_8 _EOF_ make "${cfg}" git checkout -- package/linux-headers/Config.in.host toolchain/Config.in diff="$( diff -I '_6_11\|BR2_TOOLCHAIN_HEADERS_LATEST=y' -du \ <( tail -n +5 .config.old ) \ <( tail -n +5 .config ) )" if [ "${diff}" ]; then printf 'Not idempotent for "%s"\n' "${cfg}" >&2 exit 1 fi ---8<------8<------8<------8<------8<--- ==== To verify that no other changes are made to the defconfigs that are risky when the defaults change, we ran the following simple script (where buildroot-prev is a checkout just before this commit). It shows that there are many settings removed because they are default, but none of them run the same risk that the default is going to be changed in the future. for i in configs/*_defconfig; do diff="$(diffconfig ../buildroot-next/$i $i)" if [ -n "$diff" ]; then echo "==> $i" echo "$diff" echo fi done --->8------>8------>8------>8------>8--- ==> configs/aarch64_efi_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/acmesystems_aria_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_aria_g25_256mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_128mb_defconfig -BR2_arm926t y ==> configs/acmesystems_arietta_g25_256mb_defconfig -BR2_arm926t y ==> configs/amarula_vyasa_rk3288_defconfig -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/armadeus_apf27_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf28_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/armadeus_apf51_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/aspeed_ast2600evb_defconfig -BR2_ARM_FPU_VFPV4D16 y ==> configs/asus_tinker-s_rk3288_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/at91sam9260eknf_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9g20dfc_defconfig -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_ROOTFS_UBIFS y -BR2_TARGET_ROOTFS_UBIFS_LEBSIZE 0x1f800 -BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE 0x800 -BR2_TARGET_ROOTFS_UBI_PEBSIZE 0x20000 -BR2_TARGET_ROOTFS_UBI_SUBSIZE 512 -BR2_arm926t y ==> configs/at91sam9g45m10ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9rlek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_defconfig -BR2_arm926t y ==> configs/at91sam9x5ek_mmc_dev_defconfig -BR2_arm926t y ==> configs/atmel_sama5d3_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d3xek_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/atmel_sama5d4_xplained_dev_defconfig -BR2_TARGET_ROOTFS_UBIFS y ==> configs/bananapi_m2_ultra_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/bananapro_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/beaglebone_qt5_defconfig -BR2_PACKAGE_TI_SGX_KM y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/beagleboneai64_defconfig -BR2_TARGET_TI_K3_BOOT_FIRMWARE y -BR2_TARGET_UBOOT_NEEDS_PYLIBFDT y ==> configs/beelink_gs1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/canaan_kd233_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/ci20_defconfig -BR2_KERNEL_HEADERS_AS_KERNEL y -BR2_PACKAGE_HOST_UBOOT_TOOLS y -BR2_TARGET_UBOOT_SPL_NAME "spl/u-boot-spl.bin" ==> configs/cubieboard2_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/freescale_imx28evk_defconfig -BR2_arm926t y ==> configs/friendlyarm_nanopi_r2s_defconfig -BR2_cortex_a53 y ==> configs/globalscale_espressobin_defconfig -BR2_cortex_a53 y ==> configs/hifive_unleashed_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_GENERIC_GETTY y ==> configs/imx23evk_defconfig -BR2_arm926t y ==> configs/imxrt1050-evk_defconfig -BR2_LINUX_KERNEL_ZIMAGE y ==> configs/khadas_vim3_defconfig -BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE "khadas-vim3" ==> configs/kontron_bl_imx8mm_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/kontron_pitx_imx8m_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/kontron_smarc_sal28_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/lafrite_defconfig -BR2_cortex_a53 y ==> configs/lego_ev3_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_arm926t y ==> configs/linksprite_pcduino_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/ls1046a-frwy_defconfig -BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM "ls1046" ==> configs/mx6cubox_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/nexbox_a95x_defconfig -BR2_cortex_a53 y ==> configs/nitrogen6sx_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen6x_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen7_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/nitrogen8m_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mm_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mn_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/nitrogen8mp_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_cortex_a53 y ==> configs/odroidc2_defconfig -BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY y ==> configs/olimex_a10_olinuxino_lime_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a13_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a20_olinuxino_lime2_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_lime_defconfig -BR2_ARM_EABIHF y -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/olimex_a20_olinuxino_micro_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a33_olinuxino_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_FORMAT_BIN y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/olimex_a64_olinuxino_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/olimex_imx233_olinuxino_defconfig -BR2_arm926t y ==> configs/openblocks_a6_defconfig -BR2_arm926t y ==> configs/orangepi_lite2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_one_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_one_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/orangepi_pc_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_pc_plus_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_r1_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero2w_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero3_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/orangepi_zero_plus2_defconfig -BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/orangepi_zero_plus_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y -BR2_cortex_a53 y ==> configs/pine64_defconfig -BR2_cortex_a53 y ==> configs/pine64_sopine_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_cortex_a53 y ==> configs/qemu_aarch64_sbsa_defconfig -BR2_TARGET_GRUB2_ARM64_EFI y ==> configs/qemu_aarch64_virt_defconfig -BR2_cortex_a53 y ==> configs/qemu_arm_versatile_defconfig -BR2_arm926t y ==> configs/qemu_arm_vexpress_defconfig -BR2_ARM_FPU_VFPV3D16 y ==> configs/qemu_arm_vexpress_tz_defconfig -BR2_PACKAGE_LIBOPENSSL y ==> configs/qemu_m68k_mcf5208_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_m68k_q800_defconfig -BR2_LINUX_KERNEL_VMLINUX y -BR2_TARGET_GENERIC_GETTY y -BR2_m68k_68040 y ==> configs/qemu_microblazebe_mmu_defconfig -BR2_microblaze y ==> configs/qemu_microblazeel_mmu_defconfig -BR2_microblaze y ==> configs/qemu_mips32r2_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r2el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips32r6el_malta_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_mips64r6el_malta_defconfig -BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc64le_powernv8_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc64le_pseries_defconfig -BR2_powerpc_power8 y ==> configs/qemu_ppc_bamboo_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_g3beige_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_ppc_mpc8544ds_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv32_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_nommu_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_riscv64_virt_defconfig -BR2_LINUX_KERNEL_IMAGE y -BR2_RISCV_64 y -BR2_TARGET_GENERIC_GETTY y ==> configs/qemu_sh4_r2d_defconfig -BR2_sh4 y ==> configs/qemu_sparc64_sun4u_defconfig -BR2_sparc_v9 y ==> configs/qemu_sparc_ss10_defconfig -BR2_sparc_v8 y ==> configs/qemu_x86_defconfig -BR2_i386 y ==> configs/raspberrypi0_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi0w_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi2_defconfig -BR2_ARM_EABIHF y ==> configs/raspberrypi3_64_defconfig -BR2_cortex_a53 y ==> configs/raspberrypi3_qt5we_defconfig -BR2_PACKAGE_KMOD y -BR2_PACKAGE_QT5BASE_JPEG y -BR2_PACKAGE_QT5BASE_PNG y -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/raspberrypi_defconfig -BR2_ARM_EABIHF y ==> configs/riotboard_defconfig -BR2_TARGET_GENERIC_GETTY y ==> configs/rock64_defconfig -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rock_pi_n8_defconfig -BR2_LINUX_KERNEL_USE_DEFCONFIG y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/rockpro64_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y -BR2_TARGET_UBOOT_NEEDS_PYTHON3 y ==> configs/s6lx9_microboard_defconfig -BR2_microblaze y ==> configs/sheevaplug_defconfig -BR2_TARGET_GENERIC_GETTY y -BR2_TARGET_UBOOT_NETWORK n -BR2_arm926t y ==> configs/sipeed_maix_bit_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_bit_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_dock_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_dock_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maix_go_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maix_go_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/sipeed_maixduino_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y ==> configs/sipeed_maixduino_sdcard_defconfig -BR2_BINFMT_FLAT y -BR2_RISCV_64 y -BR2_RISCV_ABI_LP64D y -BR2_TARGET_UBOOT_FORMAT_BIN y ==> configs/snps_archs38_hsdk_defconfig -BR2_TOOLCHAIN_BUILDROOT_GLIBC y ==> configs/solidrun_clearfog_gt_8k_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n ==> configs/solidrun_macchiatobin_defconfig -BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n -BR2_TARGET_ROOTFS_TAR y -BR2_TARGET_UBOOT_USE_DEFCONFIG y ==> configs/spike_riscv64_defconfig -BR2_RISCV_64 y ==> configs/ts5500_defconfig -BR2_i386 y -BR2_x86_i586 y ==> configs/versal_vck190_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/versal_vpk180_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kd240_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kr260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_kria_kv260_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu102_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu104_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ==> configs/zynqmp_zcu106_defconfig -BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1" ---8<------8<------8<------8<------8<---
2024-09-22 00:32:59 +08:00
BR2_PACKAGE_HOST_GENIMAGE=y
configs/imxrt1050-evk: new defconfig Add defconfig for imxrt1050-evk is a development board from NXP. The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz up to the latter with i.MXRT1170 with cortex-M7@1Ghz and cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing that these chips are comparable to the STM32F7xxs which have Buildroot ported to them it seems reasonable to add support for them. https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-01-03 02:16:03 +08:00
BR2_PACKAGE_HOST_MTOOLS=y
Reference in New Issue Copy Permalink