binutils-gdb/gas
Peter Bergner 066be9f7bd gas/
* config/tc-ppc.c (pre_defined_registers): Add "f32" to "f63",
	"f.32" to "f.63", "vs0" to "vs63" and "vs.0" to "vs.63".
	(parse_cpu): Extend -mpower7 to accept power7 and isel instructions.

gas/testsuite/
	* gas/ppc/e500mc.d ("wait", "waitsrv", "waitimpl"): Add tests.
	* gas/ppc/e500mc.s: Likewise.
	* gas/ppc/power6.d ("cdtbcd", "cbcdtd", "addg6s"): Add tests.
	* gas/ppc/power6.s: Likewise.
	* gas/ppc/power7.d ("lfdpx", "mffgpr", "mftgpr"): Remove invalid tests.
	("wait", "waitsrv", "waitimpl", "divwe", "divwe.", "divweo", "divweo.",
	"divweu", "divweu.", "divweuo", "divweuo.", "bpermd", "popcntw",
	"popcntd", "ldbrx", "stdbrx", "lfiwzx", "lfiwzx", "fcfids", "fcfids.",
	"fcfidus", "fcfidus.", "fctiwu", "fctiwu.", "fctiwuz", "fctiwuz.",
	"fctidu", "fctidu.", "fctiduz", "fctiduz.", "fcfidu", "fcfidu.",
	"ftdiv", "ftdiv", "ftsqrt", "ftsqrt", "dcbtt", "dcbtstt", "dcffix",
	"dcffix.", "lbarx", "lbarx", "lbarx", "lharx", "lharx", "lharx",
	"stbcx.", "sthcx.", "fre", "fre.", "fres", "fres.", "frsqrte",
	"frsqrte.", "frsqrtes", "frsqrtes.", "isel"): Add tests.
	* gas/ppc/power7.s: Likewise.
	* gas/ppc/vsx.d: New test.
	* gas/ppc/vsx.s: Likewise.
	* gas/ppc/ppc.exp: Run it.

include/opcode/
	* ppc.h (PPC_OPCODE_POWER7): New.

opcodes/
	* ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
	the power7 and the isel instructions.
	* ppc-opc.c (insert_xc6, extract_xc6): New static functions.
	(insert_dm, extract_dm): Likewise.
	(XB6): Update comment to include XX2 form.
	(WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
	XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
	(RemoveXX3DM): Delete.
	(powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
	"mftgpr">: Deprecate for POWER7.
	<"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
	"frsqrte.">: Deprecate the three operand form and enable the two
	operand form for POWER7 and later.
	<"wait">: Extend to accept optional parameter.  Enable for POWER7.
	<"waitsrv", "waitimpl">: Add extended opcodes.
	<"ldbrx", "stdbrx">: Enable for POWER7.
	<"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
	<"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
	"divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
	"divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
	"divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
	"fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
	"fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
	"lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
	<"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
	"stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
	"xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
	"xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
	"xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
	"xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
	"xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
	"xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
	"xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
	"xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
	"xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
	"xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
	"xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
	"xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
	"xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
	"xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
	"xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
	"xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
	"xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
	"xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
	"xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
	"xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
	"xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
	"xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
	"xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
	"xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
	"xxspltw", "xxswapd">: Add VSX opcodes.
2009-02-26 22:07:33 +00:00
..
config gas/ 2009-02-26 22:07:33 +00:00
doc * doc/all.texi: Set S390. 2009-02-23 10:10:25 +00:00
po bfd: 2009-02-03 15:54:05 +00:00
testsuite gas/ 2009-02-26 22:07:33 +00:00
acinclude.m4 bfd/ 2007-06-14 15:31:01 +00:00
aclocal.m4 * configure: Regenerate for new libtool. 2008-09-29 15:34:33 +00:00
app.c PR 6878 2008-09-29 14:20:39 +00:00
as.c Update copyright year in --version messages. 2008-11-17 17:44:32 +00:00
as.h Banish PARAMS and PTR. Convert to ISO C. 2008-08-12 23:39:31 +00:00
asintl.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
atof-generic.c Switch to GPLv3 2007-07-03 11:01:12 +00:00
bignum.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
bit_fix.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
cgen.c Switch to GPLv3 2007-07-03 11:01:12 +00:00
cgen.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
ChangeLog gas/ 2009-02-26 22:07:33 +00:00
ChangeLog-0001 formatting, tack emacs control vars at end 2005-03-03 01:27:10 +00:00
ChangeLog-0203 Fix year in ChangeLog entries. 2007-08-07 16:05:45 +00:00
ChangeLog-2004 split changelogs 2006-01-16 23:15:07 +00:00
ChangeLog-2005 Fix year in ChangeLog entries. 2007-08-07 16:05:45 +00:00
ChangeLog-2006 Fix year in ChangeLog entries. 2007-08-07 16:05:45 +00:00
ChangeLog-2007 Move 2007 ChangeLog entries to ChangeLog-2007. 2008-01-02 21:41:02 +00:00
ChangeLog-2008 gas/ 2009-01-06 01:03:27 +00:00
ChangeLog-9295 Fix typo. 2005-07-16 02:31:22 +00:00
ChangeLog-9697 formatting, tack emacs control vars at end 2005-03-03 01:27:10 +00:00
ChangeLog-9899 formatting, tack emacs control vars at end 2005-03-03 01:27:10 +00:00
cond.c Switch to GPLv3 2007-07-03 11:01:12 +00:00
config.in bfd/ 2008-09-11 19:02:04 +00:00
configure bfd: 2009-02-03 15:54:05 +00:00
configure.in bfd: 2009-02-03 15:54:05 +00:00
configure.tgt * configure.tgt: Restore alpha sorting to object format switch 2009-01-19 15:40:56 +00:00
CONTRIBUTORS
COPYING Switch to GPLv3 2007-07-03 11:01:12 +00:00
debug.c Switch to GPLv3 2007-07-03 11:01:12 +00:00
dep-in.sed top level: 2007-02-17 13:33:57 +00:00
depend.c Switch to GPLv3 2007-07-03 11:01:12 +00:00
dw2gencfi.c * Makefile.am (ehopt.o): Add struc-symbol.h. 2008-11-28 21:28:28 +00:00
dw2gencfi.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
dwarf2dbg.c * include/elf/ia64.h (SHT_IA_64_VMS_DISPLAY_NAME_INFO, 2009-01-15 12:42:52 +00:00
dwarf2dbg.h * include/elf/ia64.h (SHT_IA_64_VMS_DISPLAY_NAME_INFO, 2009-01-15 12:42:52 +00:00
ecoff.c Banish PARAMS and PTR. Convert to ISO C. 2008-08-12 23:39:31 +00:00
ecoff.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
ehopt.c * Makefile.am (ehopt.o): Add struc-symbol.h. 2008-11-28 21:28:28 +00:00
emul-target.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
emul.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
expr.c Add MN10300 linker relaxation support for symbol differences 2007-10-19 17:31:31 +00:00
expr.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
flonum-copy.c Switch to GPLv3 2007-07-03 11:01:12 +00:00
flonum-konst.c Switch to GPLv3 2007-07-03 11:01:12 +00:00
flonum-mult.c Switch to GPLv3 2007-07-03 11:01:12 +00:00
flonum.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
frags.c Remove unnecessary casts on obstack_alloc invocations. 2008-10-21 00:26:17 +00:00
frags.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
gdbinit.in * as.h (as_perror): Delete declaration. 2006-09-22 11:35:14 +00:00
hash.c Remove unnecessary casts on obstack_alloc invocations. 2008-10-21 00:26:17 +00:00
hash.h PR 6575 2008-08-11 07:40:22 +00:00
input-file.c Switch to GPLv3 2007-07-03 11:01:12 +00:00
input-file.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
input-scrub.c PR gas/7025 2008-11-12 02:42:46 +00:00
itbl-lex.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
itbl-lex.l Switch to GPLv3 2007-07-03 11:01:12 +00:00
itbl-ops.c * or32-opc.c (or32_print_register, or32_print_immediate, 2009-01-02 14:21:54 +00:00
itbl-ops.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
itbl-parse.y Switch to GPLv3 2007-07-03 11:01:12 +00:00
listing.c * listing.c (buffer_line): Open the source file with FOPEN_RB. 2008-10-03 20:21:33 +00:00
listing.h * listing.c: Add -ag listing flag to show general information in 2008-04-10 12:45:18 +00:00
literal.c Switch to GPLv3 2007-07-03 11:01:12 +00:00
macro.c Banish PARAMS and PTR. Convert to ISO C. 2008-08-12 23:39:31 +00:00
macro.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
MAINTAINERS
Makefile.am bfd: 2009-02-03 15:54:05 +00:00
Makefile.in bfd: 2009-02-03 15:54:05 +00:00
messages.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
NEWS Add LM32 port. 2008-12-23 19:10:25 +00:00
obj.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
output-file.c Switch to GPLv3 2007-07-03 11:01:12 +00:00
output-file.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
read.c 2009-01-26 Andrew Stubbs <ams@codesourcery.com> 2009-01-26 14:36:43 +00:00
read.h 2009-01-26 Andrew Stubbs <ams@codesourcery.com> 2009-01-26 14:36:43 +00:00
README * README-vms: Delete. 2005-08-11 01:25:29 +00:00
remap.c 2007-08-24 Joseph Myers <joseph@codesourcery.com> 2007-08-24 21:49:55 +00:00
sb.c Switch to GPLv3 2007-07-03 11:01:12 +00:00
sb.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
stabs.c * read.c (do_s_func): Check asprintf return status. 2007-10-15 02:01:25 +00:00
stamp-h.in
struc-symbol.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
subsegs.c Switch to GPLv3 2007-07-03 11:01:12 +00:00
subsegs.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
symbols.c Remove unnecessary casts on obstack_alloc invocations. 2008-10-21 00:26:17 +00:00
symbols.h Switch to GPLv3 2007-07-03 11:01:12 +00:00
tc.h * include/elf/ia64.h (SHT_IA_64_VMS_DISPLAY_NAME_INFO, 2009-01-15 12:42:52 +00:00
write.c * write.c (TC_FORCE_RELOCATION_SUB_LOCAL): Heed md_register_arithmetic. 2008-09-19 10:00:40 +00:00
write.h Switch to GPLv3 2007-07-03 11:01:12 +00:00

		README for GAS

A number of things have changed since version 1 and the wonderful
world of gas looks very different.  There's still a lot of irrelevant
garbage lying around that will be cleaned up in time.  Documentation
is scarce, as are logs of the changes made since the last gas release.
My apologies, and I'll try to get something useful.

Unpacking and Installation - Summary
====================================

See ../binutils/README.

To build just the assembler, make the target all-gas.

Documentation
=============

The GAS release includes texinfo source for its manual, which can be processed
into `info' or `dvi' forms.

The DVI form is suitable for printing or displaying; the commands for doing
this vary from system to system.  On many systems, `lpr -d' will print a DVI
file.  On others, you may need to run a program such as `dvips' to convert the
DVI file into a form your system can print.

If you wish to build the DVI file, you will need to have TeX installed on your
system.  You can rebuild it by typing:

	cd gas/doc
	make as.dvi

The Info form is viewable with the GNU Emacs `info' subsystem, or the
stand-alone `info' program, available as part of the GNU Texinfo distribution.
To build the info files, you will need the `makeinfo' program.  Type:

	cd gas/doc
	make info

Specifying names for hosts and targets
======================================

   The specifications used for hosts and targets in the `configure'
script are based on a three-part naming scheme, but some short
predefined aliases are also supported.  The full naming scheme encodes
three pieces of information in the following pattern:

     ARCHITECTURE-VENDOR-OS

   For example, you can use the alias `sun4' as a HOST argument or in a
`--target=TARGET' option.  The equivalent full name is
`sparc-sun-sunos4'.

   The `configure' script accompanying GAS does not provide any query
facility to list all supported host and target names or aliases. 
`configure' calls the Bourne shell script `config.sub' to map
abbreviations to full names; you can read the script, if you wish, or
you can use it to test your guesses on abbreviations--for example:

     % sh config.sub i386v
     i386-unknown-sysv
     % sh config.sub i786v
     Invalid configuration `i786v': machine `i786v' not recognized


`configure' options
===================

   Here is a summary of the `configure' options and arguments that are
most often useful for building GAS.  `configure' also has several other
options not listed here.

     configure [--help]
               [--prefix=DIR]
               [--srcdir=PATH]
               [--host=HOST]
               [--target=TARGET]
               [--with-OPTION]
               [--enable-OPTION]

You may introduce options with a single `-' rather than `--' if you
prefer; but you may abbreviate option names if you use `--'.

`--help'
     Print a summary of the options to `configure', and exit.

`-prefix=DIR'
     Configure the source to install programs and files under directory
     `DIR'.

`--srcdir=PATH'
     Look for the package's source code in directory DIR.  Usually
     `configure' can determine that directory automatically.

`--host=HOST'
     Configure GAS to run on the specified HOST.  Normally the
     configure script can figure this out automatically.

     There is no convenient way to generate a list of all available
     hosts.

`--target=TARGET'
     Configure GAS for cross-assembling programs for the specified
     TARGET.  Without this option, GAS is configured to assemble .o files
     that run on the same machine (HOST) as GAS itself.

     There is no convenient way to generate a list of all available
     targets.

`--enable-OPTION'
     These flags tell the program or library being configured to 
     configure itself differently from the default for the specified
     host/target combination.  See below for a list of `--enable'
     options recognized in the gas distribution.

`configure' accepts other options, for compatibility with configuring
other GNU tools recursively; but these are the only options that affect
GAS or its supporting libraries.

The `--enable' options recognized by software in the gas distribution are:

`--enable-targets=...'
     This causes one or more specified configurations to be added to those for
     which BFD support is compiled.  Currently gas cannot use any format other
     than its compiled-in default, so this option is not very useful.

`--enable-bfd-assembler'
     This causes the assembler to use the new code being merged into it to use
     BFD data structures internally, and use BFD for writing object files.
     For most targets, this isn't supported yet.  For most targets where it has
     been done, it's already the default.  So generally you won't need to use
     this option.

Compiler Support Hacks
======================

On a few targets, the assembler has been modified to support a feature
that is potentially useful when assembling compiler output, but which
may confuse assembly language programmers.  If assembler encounters a
.word pseudo-op of the form symbol1-symbol2 (the difference of two
symbols), and the difference of those two symbols will not fit in 16
bits, the assembler will create a branch around a long jump to
symbol1, and insert this into the output directly before the next
label: The .word will (instead of containing garbage, or giving an
error message) contain (the address of the long jump)-symbol2.  This
allows the assembler to assemble jump tables that jump to locations
very far away into code that works properly.  If the next label is
more than 32K away from the .word, you lose (silently); RMS claims
this will never happen.  If the -K option is given, you will get a
warning message when this happens.


REPORTING BUGS IN GAS
=====================

Bugs in gas should be reported to:

   bug-binutils@gnu.org.

They may be cross-posted to gcc-bugs@gnu.org if they affect the use of
gas with gcc.  They should not be reported just to gcc-bugs, since not
all of the maintainers read that list.

See ../binutils/README for what we need in a bug report.