binutils-gdb/gdb/xcoffread.c
Jim Kingdon e2adc41a31 * xcoffread.c (xcoff_sym_fns): Revise comment about merging this
with coffread.c.

	* breakpoint.c (fixup_breakpoints): Removed.
	* rs6000-nat.c (vmap_symtab): Don't call fixup_breakpoints.
	(vmap_ldinfo, xcoff_relocate_core): Call breakpoint_re_set.

	* coffread.c (coff_symfile_offsets): Allocate SECT_OFF_MAX
	sections, not just SECT_OFF_MAX-1.

	* rs6000-nat.c (vmap_symtab), xcoffread.c: Re-do section offsets
	to be indexed by SECT_OFF_* instead of xcoff section numbers.
	* objfiles.c, remote.c: Remove comments regarding SECT_OFF_*.
	* symtab.h: Revise comment about block_line_section.
	* rs6000-nat.c (vmap_symtab): Don't relocate objfile->sections.
1995-04-16 00:53:31 +00:00

2448 lines
66 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Read AIX xcoff symbol tables and convert to internal format, for GDB.
Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Free Software Foundation, Inc.
Derived from coffread.c, dbxread.c, and a lot of hacking.
Contributed by IBM Corporation.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
/* Native only: Need struct tbtable in <sys/debug.h> from host, and
need xcoff_add_toc_to_loadinfo in rs6000-tdep.c from target.
need xcoff_init_loadinfo ditto.
However, if you grab <sys/debug.h> and make it available on your
host, and define FAKING_RS6000, then this code will compile. */
#include "defs.h"
#include "bfd.h"
#include <sys/types.h>
#include <fcntl.h>
#include <ctype.h>
#include <string.h>
#include "obstack.h"
#include <sys/param.h>
#ifndef NO_SYS_FILE
#include <sys/file.h>
#endif
#include <sys/stat.h>
#include <sys/debug.h>
#include "coff/internal.h" /* FIXME, internal data from BFD */
#include "libcoff.h" /* FIXME, internal data from BFD */
#include "coff/rs6000.h" /* FIXME, raw file-format guts of xcoff */
#include "symtab.h"
#include "gdbtypes.h"
#include "symfile.h"
#include "objfiles.h"
#include "buildsym.h"
#include "stabsread.h"
#include "complaints.h"
#include "gdb-stabs.h"
/* For interface with stabsread.c. */
#include "aout/stab_gnu.h"
/* Simplified internal version of coff symbol table information */
struct coff_symbol {
char *c_name;
int c_symnum; /* symbol number of this entry */
int c_naux; /* 0 if syment only, 1 if syment + auxent */
long c_value;
unsigned char c_sclass;
int c_secnum;
unsigned int c_type;
};
/* The COFF line table, in raw form. */
static char *linetab = NULL; /* Its actual contents */
static long linetab_offset; /* Its offset in the file */
static unsigned long linetab_size; /* Its size */
/* last function's saved coff symbol `cs' */
static struct coff_symbol fcn_cs_saved;
static bfd *symfile_bfd;
/* Core address of start and end of text of current source file.
This is calculated from the first function seen after a C_FILE
symbol. */
static CORE_ADDR cur_src_end_addr;
/* Core address of the end of the first object file. */
static CORE_ADDR first_object_file_end;
/* pointer to the string table */
static char *strtbl;
/* length of the string table */
static int strtbl_len;
/* pointer to debug section */
static char *debugsec;
/* pointer to the a.out symbol table */
static char *symtbl;
/* Number of symbols in symtbl. */
static int symtbl_num_syms;
/* initial symbol-table-debug-string vector length */
#define INITIAL_STABVECTOR_LENGTH 40
/* Nonzero if within a function (so symbols should be local,
if nothing says specifically). */
int within_function;
/* Local variables that hold the shift and mask values for the
COFF file that we are currently reading. These come back to us
from BFD, and are referenced by their macro names, as well as
internally to the BTYPE, ISPTR, ISFCN, ISARY, ISTAG, and DECREF
macros from ../internalcoff.h . */
static unsigned local_n_btshft;
static unsigned local_n_tmask;
#undef N_BTSHFT
#define N_BTSHFT local_n_btshft
#undef N_TMASK
#define N_TMASK local_n_tmask
/* Local variables that hold the sizes in the file of various COFF structures.
(We only need to know this to read them from the file -- BFD will then
translate the data in them, into `internal_xxx' structs in the right
byte order, alignment, etc.) */
static unsigned local_symesz;
struct coff_symfile_info {
file_ptr min_lineno_offset; /* Where in file lowest line#s are */
file_ptr max_lineno_offset; /* 1+last byte of line#s in file */
};
static struct complaint rsym_complaint =
{"Non-stab C_RSYM `%s' needs special handling", 0, 0};
static struct complaint storclass_complaint =
{"Unexpected storage class: %d", 0, 0};
static struct complaint bf_notfound_complaint =
{"line numbers off, `.bf' symbol not found", 0, 0};
extern struct complaint ef_complaint;
extern struct complaint eb_complaint;
static void
enter_line_range PARAMS ((struct subfile *, unsigned, unsigned,
CORE_ADDR, CORE_ADDR, unsigned *));
static void
free_debugsection PARAMS ((void));
static int
init_debugsection PARAMS ((bfd *));
static int
init_stringtab PARAMS ((bfd *, file_ptr, struct objfile *));
static void
xcoff_symfile_init PARAMS ((struct objfile *));
static void
xcoff_new_init PARAMS ((struct objfile *));
static void
xcoff_symfile_read PARAMS ((struct objfile *, struct section_offsets *, int));
static void
xcoff_symfile_finish PARAMS ((struct objfile *));
static struct section_offsets *
xcoff_symfile_offsets PARAMS ((struct objfile *, CORE_ADDR));
static int
init_lineno PARAMS ((bfd *, file_ptr, int));
static void
free_linetab PARAMS ((void));
static void
find_linenos PARAMS ((bfd *, sec_ptr, PTR));
static char *
coff_getfilename PARAMS ((union internal_auxent *));
static void
read_symbol PARAMS ((struct internal_syment *, int));
static int
read_symbol_lineno PARAMS ((int));
static int
read_symbol_nvalue PARAMS ((int));
static struct symbol *
process_xcoff_symbol PARAMS ((struct coff_symbol *, struct objfile *));
static void
read_xcoff_symtab PARAMS ((struct objfile *, int));
static void
add_stab_to_list PARAMS ((char *, struct pending_stabs **));
/* Return the section_offsets* that CS points to. */
static int cs_to_section PARAMS ((struct coff_symbol *, struct objfile *));
struct find_targ_sec_arg {
int targ_index;
int *resultp;
};
static void find_targ_sec PARAMS ((bfd *, asection *, void *));
static void find_targ_sec (abfd, sect, obj)
bfd *abfd;
asection *sect;
PTR obj;
{
struct find_targ_sec_arg *args = (struct find_targ_sec_arg *)obj;
if (sect->target_index == args->targ_index)
{
/* This is the section. Figure out what SECT_OFF_* code it is. */
if (bfd_get_section_flags (abfd, sect) & SEC_CODE)
*args->resultp = SECT_OFF_TEXT;
else if (bfd_get_section_flags (abfd, sect) & SEC_LOAD)
*args->resultp = SECT_OFF_DATA;
else
*args->resultp = SECT_OFF_BSS;
}
}
/* Return the section number (SECT_OFF_*) that CS points to. */
static int
cs_to_section (cs, objfile)
struct coff_symbol *cs;
struct objfile *objfile;
{
int off = SECT_OFF_TEXT;
struct find_targ_sec_arg args;
args.targ_index = cs->c_secnum;
args.resultp = &off;
bfd_map_over_sections (objfile->obfd, find_targ_sec, &args);
return off;
}
/* add a given stab string into given stab vector. */
static void
add_stab_to_list (stabname, stabvector)
char *stabname;
struct pending_stabs **stabvector;
{
if ( *stabvector == NULL) {
*stabvector = (struct pending_stabs *)
xmalloc (sizeof (struct pending_stabs) +
INITIAL_STABVECTOR_LENGTH * sizeof (char*));
(*stabvector)->count = 0;
(*stabvector)->length = INITIAL_STABVECTOR_LENGTH;
}
else if ((*stabvector)->count >= (*stabvector)->length) {
(*stabvector)->length += INITIAL_STABVECTOR_LENGTH;
*stabvector = (struct pending_stabs *)
xrealloc ((char *) *stabvector, sizeof (struct pending_stabs) +
(*stabvector)->length * sizeof (char*));
}
(*stabvector)->stab [(*stabvector)->count++] = stabname;
}
/* Linenos are processed on a file-by-file basis.
Two reasons:
1) xlc (IBM's native c compiler) postpones static function code
emission to the end of a compilation unit. This way it can
determine if those functions (statics) are needed or not, and
can do some garbage collection (I think). This makes line
numbers and corresponding addresses unordered, and we end up
with a line table like:
lineno addr
foo() 10 0x100
20 0x200
30 0x300
foo3() 70 0x400
80 0x500
90 0x600
static foo2()
40 0x700
50 0x800
60 0x900
and that breaks gdb's binary search on line numbers, if the
above table is not sorted on line numbers. And that sort
should be on function based, since gcc can emit line numbers
like:
10 0x100 - for the init/test part of a for stmt.
20 0x200
30 0x300
10 0x400 - for the increment part of a for stmt.
arrange_linetable() will do this sorting.
2) aix symbol table might look like:
c_file // beginning of a new file
.bi // beginning of include file
.ei // end of include file
.bi
.ei
basically, .bi/.ei pairs do not necessarily encapsulate
their scope. They need to be recorded, and processed later
on when we come the end of the compilation unit.
Include table (inclTable) and process_linenos() handle
that. */
/* compare line table entry addresses. */
static int
compare_lte (lte1, lte2)
struct linetable_entry *lte1, *lte2;
{
return lte1->pc - lte2->pc;
}
/* Give a line table with function entries are marked, arrange its functions
in assending order and strip off function entry markers and return it in
a newly created table. If the old one is good enough, return the old one. */
/* FIXME: I think all this stuff can be replaced by just passing
sort_linevec = 1 to end_symtab. */
static struct linetable *
arrange_linetable (oldLineTb)
struct linetable *oldLineTb; /* old linetable */
{
int ii, jj,
newline, /* new line count */
function_count; /* # of functions */
struct linetable_entry *fentry; /* function entry vector */
int fentry_size; /* # of function entries */
struct linetable *newLineTb; /* new line table */
#define NUM_OF_FUNCTIONS 20
fentry_size = NUM_OF_FUNCTIONS;
fentry = (struct linetable_entry*)
xmalloc (fentry_size * sizeof (struct linetable_entry));
for (function_count=0, ii=0; ii <oldLineTb->nitems; ++ii) {
if (oldLineTb->item[ii].line == 0) { /* function entry found. */
if (function_count >= fentry_size) { /* make sure you have room. */
fentry_size *= 2;
fentry = (struct linetable_entry*)
xrealloc (fentry, fentry_size * sizeof (struct linetable_entry));
}
fentry[function_count].line = ii;
fentry[function_count].pc = oldLineTb->item[ii].pc;
++function_count;
}
}
if (function_count == 0) {
free (fentry);
return oldLineTb;
}
else if (function_count > 1)
qsort (fentry, function_count, sizeof(struct linetable_entry), compare_lte);
/* allocate a new line table. */
newLineTb = (struct linetable *)
xmalloc
(sizeof (struct linetable) +
(oldLineTb->nitems - function_count) * sizeof (struct linetable_entry));
/* if line table does not start with a function beginning, copy up until
a function begin. */
newline = 0;
if (oldLineTb->item[0].line != 0)
for (newline=0;
newline < oldLineTb->nitems && oldLineTb->item[newline].line; ++newline)
newLineTb->item[newline] = oldLineTb->item[newline];
/* Now copy function lines one by one. */
for (ii=0; ii < function_count; ++ii) {
for (jj = fentry[ii].line + 1;
jj < oldLineTb->nitems && oldLineTb->item[jj].line != 0;
++jj, ++newline)
newLineTb->item[newline] = oldLineTb->item[jj];
}
free (fentry);
newLineTb->nitems = oldLineTb->nitems - function_count;
return newLineTb;
}
/* We try to detect the beginning of a compilation unit. That info will
be used as an entry in line number recording routines (enter_line_range) */
static unsigned first_fun_line_offset;
static unsigned first_fun_bf;
#define mark_first_line(OFFSET, SYMNUM) \
if (!first_fun_line_offset) { \
first_fun_line_offset = OFFSET; \
first_fun_bf = SYMNUM; \
}
/* include file support: C_BINCL/C_EINCL pairs will be kept in the
following `IncludeChain'. At the end of each symtab (end_symtab),
we will determine if we should create additional symtab's to
represent if (the include files. */
typedef struct _inclTable {
char *name; /* include filename */
/* Offsets to the line table. end points to the last entry which is
part of this include file. */
int begin, end;
struct subfile *subfile;
unsigned funStartLine; /* start line # of its function */
} InclTable;
#define INITIAL_INCLUDE_TABLE_LENGTH 20
static InclTable *inclTable; /* global include table */
static int inclIndx; /* last entry to table */
static int inclLength; /* table length */
static int inclDepth; /* nested include depth */
static void allocate_include_entry PARAMS ((void));
static void
record_include_begin (cs)
struct coff_symbol *cs;
{
if (inclDepth)
{
/* In xcoff, we assume include files cannot be nested (not in .c files
of course, but in corresponding .s files.). */
/* This can happen with old versions of GCC.
GCC 2.3.3-930426 does not exhibit this on a test case which
a user said produced the message for him. */
static struct complaint msg = {"Nested C_BINCL symbols", 0, 0};
complain (&msg);
}
++inclDepth;
allocate_include_entry ();
inclTable [inclIndx].name = cs->c_name;
inclTable [inclIndx].begin = cs->c_value;
}
static void
record_include_end (cs)
struct coff_symbol *cs;
{
InclTable *pTbl;
if (inclDepth == 0)
{
static struct complaint msg = {"Mismatched C_BINCL/C_EINCL pair", 0, 0};
complain (&msg);
}
allocate_include_entry ();
pTbl = &inclTable [inclIndx];
pTbl->end = cs->c_value;
--inclDepth;
++inclIndx;
}
static void
allocate_include_entry ()
{
if (inclTable == NULL)
{
inclTable = (InclTable *)
xmalloc (sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH);
memset (inclTable,
'\0', sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH);
inclLength = INITIAL_INCLUDE_TABLE_LENGTH;
inclIndx = 0;
}
else if (inclIndx >= inclLength)
{
inclLength += INITIAL_INCLUDE_TABLE_LENGTH;
inclTable = (InclTable *)
xrealloc (inclTable, sizeof (InclTable) * inclLength);
memset (inclTable + inclLength - INITIAL_INCLUDE_TABLE_LENGTH,
'\0', sizeof (InclTable)*INITIAL_INCLUDE_TABLE_LENGTH);
}
}
/* given the start and end addresses of a compilation unit (or a csect,
at times) process its lines and create appropriate line vectors. */
static void
process_linenos (start, end)
CORE_ADDR start, end;
{
char *pp;
int offset, ii;
/* subfile structure for the main compilation unit. */
struct subfile main_subfile;
/* In the main source file, any time we see a function entry, we
reset this variable to function's absolute starting line number.
All the following line numbers in the function are relative to
this, and we record absolute line numbers in record_line(). */
int main_source_baseline = 0;
unsigned *firstLine;
CORE_ADDR addr;
if (!(offset = first_fun_line_offset))
goto return_after_cleanup;
memset (&main_subfile, '\0', sizeof (main_subfile));
first_fun_line_offset = 0;
if (inclIndx == 0)
/* All source lines were in the main source file. None in include files. */
enter_line_range (&main_subfile, offset, 0, start, end,
&main_source_baseline);
else
{
/* There was source with line numbers in include files. */
main_source_baseline = 0;
for (ii=0; ii < inclIndx; ++ii)
{
struct subfile *tmpSubfile;
/* If there is main file source before include file, enter it. */
if (offset < inclTable[ii].begin)
{
enter_line_range
(&main_subfile, offset, inclTable[ii].begin - LINESZ,
start, 0, &main_source_baseline);
}
/* Have a new subfile for the include file. */
tmpSubfile = inclTable[ii].subfile =
(struct subfile *) xmalloc (sizeof (struct subfile));
memset (tmpSubfile, '\0', sizeof (struct subfile));
firstLine = &(inclTable[ii].funStartLine);
/* Enter include file's lines now. */
enter_line_range (tmpSubfile, inclTable[ii].begin,
inclTable[ii].end, start, 0, firstLine);
offset = inclTable[ii].end + LINESZ;
}
/* All the include files' line have been processed at this point. Now,
enter remaining lines of the main file, if any left. */
if (offset < (linetab_offset + linetab_size + 1 - LINESZ))
{
enter_line_range (&main_subfile, offset, 0, start, end,
&main_source_baseline);
}
}
/* Process main file's line numbers. */
if (main_subfile.line_vector)
{
struct linetable *lineTb, *lv;
lv = main_subfile.line_vector;
/* Line numbers are not necessarily ordered. xlc compilation will
put static function to the end. */
lineTb = arrange_linetable (lv);
if (lv == lineTb)
{
current_subfile->line_vector = (struct linetable *)
xrealloc (lv, (sizeof (struct linetable)
+ lv->nitems * sizeof (struct linetable_entry)));
}
else
{
free (lv);
current_subfile->line_vector = lineTb;
}
current_subfile->line_vector_length =
current_subfile->line_vector->nitems;
}
/* Now, process included files' line numbers. */
for (ii=0; ii < inclIndx; ++ii)
{
if ((inclTable[ii].subfile)->line_vector) /* Useless if!!! FIXMEmgo */
{
struct linetable *lineTb, *lv;
lv = (inclTable[ii].subfile)->line_vector;
/* Line numbers are not necessarily ordered. xlc compilation will
put static function to the end. */
lineTb = arrange_linetable (lv);
push_subfile ();
/* For the same include file, we might want to have more than one
subfile. This happens if we have something like:
......
#include "foo.h"
......
#include "foo.h"
......
while foo.h including code in it. (stupid but possible)
Since start_subfile() looks at the name and uses an
existing one if finds, we need to provide a fake name and
fool it. */
#if 0
start_subfile (inclTable[ii].name, (char*)0);
#else
{
/* Pick a fake name that will produce the same results as this
one when passed to deduce_language_from_filename. Kludge on
top of kludge. */
char *fakename = strrchr (inclTable[ii].name, '.');
if (fakename == NULL)
fakename = " ?";
start_subfile (fakename, (char*)0);
free (current_subfile->name);
}
current_subfile->name = strdup (inclTable[ii].name);
#endif
if (lv == lineTb)
{
current_subfile->line_vector =
(struct linetable *) xrealloc
(lv, (sizeof (struct linetable)
+ lv->nitems * sizeof (struct linetable_entry)));
}
else
{
free (lv);
current_subfile->line_vector = lineTb;
}
current_subfile->line_vector_length =
current_subfile->line_vector->nitems;
start_subfile (pop_subfile (), (char*)0);
}
}
return_after_cleanup:
/* We don't want to keep alloc/free'ing the global include file table. */
inclIndx = 0;
/* Start with a fresh subfile structure for the next file. */
memset (&main_subfile, '\0', sizeof (struct subfile));
}
void
aix_process_linenos ()
{
/* process line numbers and enter them into line vector */
process_linenos (last_source_start_addr, cur_src_end_addr);
}
/* Enter a given range of lines into the line vector.
can be called in the following two ways:
enter_line_range (subfile, beginoffset, endoffset, startaddr, 0, firstLine) or
enter_line_range (subfile, beginoffset, 0, startaddr, endaddr, firstLine)
endoffset points to the last line table entry that we should pay
attention to. */
static void
enter_line_range (subfile, beginoffset, endoffset, startaddr, endaddr, firstLine)
struct subfile *subfile;
unsigned beginoffset, endoffset; /* offsets to line table */
CORE_ADDR startaddr, endaddr;
unsigned *firstLine;
{
char *pp, *limit;
CORE_ADDR addr;
/* Do Byte swapping, if needed. FIXME! */
#define P_LINENO(PP) (*(unsigned short*)((struct external_lineno*)(PP))->l_lnno)
#define P_LINEADDR(PP) (*(long*)((struct external_lineno*)(PP))->l_addr.l_paddr)
#define P_LINESYM(PP) (*(long*)((struct external_lineno*)(PP))->l_addr.l_symndx)
pp = &linetab [beginoffset - linetab_offset];
if (endoffset != 0 && endoffset - linetab_offset >= linetab_size)
{
static struct complaint msg =
{"Bad line table offset in C_EINCL directive", 0, 0};
complain (&msg);
return;
}
limit = endoffset ? &linetab [endoffset - linetab_offset]
: &linetab [linetab_size -1];
while (pp <= limit) {
/* find the address this line represents */
addr = P_LINENO(pp) ?
P_LINEADDR(pp) : read_symbol_nvalue (P_LINESYM(pp));
if (addr < startaddr || (endaddr && addr >= endaddr))
return;
if (P_LINENO(pp) == 0) {
*firstLine = read_symbol_lineno (P_LINESYM(pp));
record_line (subfile, 0, addr);
--(*firstLine);
}
else
record_line (subfile, *firstLine + P_LINENO(pp), addr);
pp += LINESZ;
}
}
typedef struct {
int fsize; /* file size */
int fixedparms; /* number of fixed parms */
int floatparms; /* number of float parms */
unsigned int parminfo; /* parameter info.
See /usr/include/sys/debug.h
tbtable_ext.parminfo */
int framesize; /* function frame size */
} TracebackInfo;
/* Given a function symbol, return its traceback information. */
TracebackInfo *
retrieve_tracebackinfo (abfd, textsec, cs)
bfd *abfd;
sec_ptr textsec;
struct coff_symbol *cs;
{
#define TBTABLE_BUFSIZ 2000
static TracebackInfo tbInfo;
struct tbtable *ptb;
static char buffer [TBTABLE_BUFSIZ];
int *pinsn;
int bytesread=0; /* total # of bytes read so far */
int bufferbytes; /* number of bytes in the buffer */
int functionstart = cs->c_value - textsec->vma;
memset (&tbInfo, '\0', sizeof (tbInfo));
/* keep reading blocks of data from the text section, until finding a zero
word and a traceback table. */
/* Note: The logical thing way to write this code would be to assign
to bufferbytes within the while condition. But that triggers a
compiler (xlc in AIX 3.2) bug, so simplify it... */
bufferbytes =
(TBTABLE_BUFSIZ < (textsec->_raw_size - functionstart - bytesread) ?
TBTABLE_BUFSIZ : (textsec->_raw_size - functionstart - bytesread));
while (bufferbytes
&& (bfd_get_section_contents
(abfd, textsec, buffer,
(file_ptr)(functionstart + bytesread), bufferbytes)))
{
bytesread += bufferbytes;
pinsn = (int*) buffer;
/* if this is the first time we filled the buffer, retrieve function
framesize info. */
if (bytesread == bufferbytes) {
/* skip over unrelated instructions */
if (*pinsn == 0x7c0802a6) /* mflr r0 */
++pinsn;
if ((*pinsn & 0xfc00003e) == 0x7c000026) /* mfcr Rx */
++pinsn;
if ((*pinsn & 0xfc000000) == 0x48000000) /* bl foo, save fprs */
++pinsn;
if ((*pinsn & 0xfc1f0000) == 0xbc010000) /* stm Rx, NUM(r1) */
++pinsn;
do {
int tmp = (*pinsn >> 16) & 0xffff;
if (tmp == 0x9421) { /* stu r1, NUM(r1) */
tbInfo.framesize = 0x10000 - (*pinsn & 0xffff);
break;
}
else if ((*pinsn == 0x93e1fffc) || /* st r31,-4(r1) */
(tmp == 0x9001)) /* st r0, NUM(r1) */
;
/* else, could not find a frame size. */
else
return NULL;
} while (++pinsn && *pinsn);
if (!tbInfo.framesize)
return NULL;
}
/* look for a zero word. */
while (*pinsn && (pinsn < (int*)(buffer + bufferbytes - sizeof(int))))
++pinsn;
if (pinsn >= (int*)(buffer + bufferbytes))
continue;
if (*pinsn == 0) {
/* function size is the amount of bytes we have skipped so far. */
tbInfo.fsize = bytesread - (buffer + bufferbytes - (char*)pinsn);
++pinsn;
/* if we don't have the whole traceback table in the buffer, re-read
the whole thing. */
/* This is how much to read to get the traceback table.
8 bytes of the traceback table are always present, plus we
look at parminfo. */
#define MIN_TBTABSIZ 12
if ((char*)pinsn > (buffer + bufferbytes - MIN_TBTABSIZ)) {
/* In case if we are *very* close to the end of the text section
and cannot read properly from that point on, abort by returning
NULL.
This could happen if the traceback table is only 8 bytes,
but we try to read 12 bytes of it.
Handle this case more graciously -- FIXME */
if (!bfd_get_section_contents (
abfd, textsec, buffer,
(file_ptr)(functionstart +
bytesread - (buffer + bufferbytes - (char*)pinsn)),MIN_TBTABSIZ))
{ printf_unfiltered ("Abnormal return!..\n"); return NULL; }
ptb = (struct tbtable *)buffer;
}
else
ptb = (struct tbtable *)pinsn;
tbInfo.fixedparms = ptb->tb.fixedparms;
tbInfo.floatparms = ptb->tb.floatparms;
tbInfo.parminfo = ptb->tb_ext.parminfo;
return &tbInfo;
}
bufferbytes =
(TBTABLE_BUFSIZ < (textsec->_raw_size - functionstart - bytesread) ?
TBTABLE_BUFSIZ : (textsec->_raw_size - functionstart - bytesread));
}
return NULL;
}
#if 0
/* Given a function symbol, return a pointer to its traceback table. */
struct tbtable *
retrieve_traceback (abfd, textsec, cs, size)
bfd *abfd;
sec_ptr textsec;
struct coff_symbol *cs;
int *size; /* return function size */
{
#define TBTABLE_BUFSIZ 2000
#define MIN_TBTABSIZ 50 /* minimum buffer size to hold a
traceback table. */
static char buffer [TBTABLE_BUFSIZ];
int *pinsn;
int bytesread=0; /* total # of bytes read so far */
int bufferbytes; /* number of bytes in the buffer */
int functionstart = cs->c_value - textsec->filepos + textsec->vma;
*size = 0;
/* keep reading blocks of data from the text section, until finding a zero
word and a traceback table. */
while (bfd_get_section_contents (abfd, textsec, buffer,
(file_ptr)(functionstart + bytesread),
bufferbytes = (
(TBTABLE_BUFSIZ < (textsec->size - functionstart - bytesread)) ?
TBTABLE_BUFSIZ : (textsec->size - functionstart - bytesread))))
{
bytesread += bufferbytes;
pinsn = (int*) buffer;
/* look for a zero word. */
while (*pinsn && (pinsn < (int*)(buffer + bufferbytes - sizeof(int))))
++pinsn;
if (pinsn >= (int*)(buffer + bufferbytes))
continue;
if (*pinsn == 0) {
/* function size is the amount of bytes we have skipped so far. */
*size = bytesread - (buffer + bufferbytes - pinsn);
++pinsn;
/* if we don't have the whole traceback table in the buffer, re-read
the whole thing. */
if ((char*)pinsn > (buffer + bufferbytes - MIN_TBTABSIZ)) {
/* In case if we are *very* close to the end of the text section
and cannot read properly from that point on, abort for now.
Handle this case more graciously -- FIXME */
if (!bfd_get_section_contents (
abfd, textsec, buffer,
(file_ptr)(functionstart +
bytesread - (buffer + bufferbytes - pinsn)),MIN_TBTABSIZ))
/* abort (); */ { printf_unfiltered ("abort!!!\n"); return NULL; }
return (struct tbtable *)buffer;
}
else
return (struct tbtable *)pinsn;
}
}
return NULL;
}
#endif /* 0 */
/* Save the vital information for use when closing off the current file.
NAME is the file name the symbols came from, START_ADDR is the first
text address for the file, and SIZE is the number of bytes of text. */
#define complete_symtab(name, start_addr) { \
last_source_file = savestring (name, strlen (name)); \
last_source_start_addr = start_addr; \
}
/* Refill the symbol table input buffer
and set the variables that control fetching entries from it.
Reports an error if no data available.
This function can read past the end of the symbol table
(into the string table) but this does no harm. */
/* Reading symbol table has to be fast! Keep the followings as macros, rather
than functions. */
#define RECORD_MINIMAL_SYMBOL(NAME, ADDR, TYPE, ALLOCED, SECTION, OBJFILE) \
{ \
char *namestr; \
namestr = (NAME); \
if (namestr[0] == '.') ++namestr; \
if (!(ALLOCED)) { \
(NAME) = namestr = \
obstack_copy0 (&objfile->symbol_obstack, namestr, strlen (namestr)); \
(ALLOCED) = 1; \
} \
prim_record_minimal_symbol_and_info (namestr, (ADDR), (TYPE), \
(char *)NULL, (SECTION), (OBJFILE)); \
misc_func_recorded = 1; \
}
/* A parameter template, used by ADD_PARM_TO_PENDING. It is initialized
in our initializer function at the bottom of the file, to avoid
dependencies on the exact "struct symbol" format. */
static struct symbol parmsym;
/* Add a parameter to a given pending symbol list. */
#define ADD_PARM_TO_PENDING(PARM, VALUE, PTYPE, PENDING_SYMBOLS) \
{ \
PARM = (struct symbol *) \
obstack_alloc (&objfile->symbol_obstack, sizeof (struct symbol)); \
*(PARM) = parmsym; \
SYMBOL_TYPE (PARM) = PTYPE; \
SYMBOL_VALUE (PARM) = VALUE; \
add_symbol_to_list (PARM, &PENDING_SYMBOLS); \
}
/* xcoff has static blocks marked in `.bs', `.es' pairs. They cannot be
nested. At any given time, a symbol can only be in one static block.
This is the base address of current static block, zero if non exists. */
static int static_block_base = 0;
/* Section number for the current static block. */
static int static_block_section = -1;
/* true if space for symbol name has been allocated. */
static int symname_alloced = 0;
/* Next symbol to read. Pointer into raw seething symbol table. */
static char *raw_symbol;
/* This is the function which stabsread.c calls to get symbol
continuations. */
static char *
xcoff_next_symbol_text ()
{
struct internal_syment symbol;
static struct complaint msg =
{"Unexpected symbol continuation", 0, 0};
char *retval;
bfd_coff_swap_sym_in (current_objfile->obfd, raw_symbol, &symbol);
if (symbol.n_zeroes)
{
complain (&msg);
/* Return something which points to '\0' and hope the symbol reading
code does something reasonable. */
retval = "";
}
else if (symbol.n_sclass & 0x80)
{
retval = debugsec + symbol.n_offset;
raw_symbol += coff_data (current_objfile->obfd)->local_symesz;
++symnum;
}
else
{
complain (&msg);
/* Return something which points to '\0' and hope the symbol reading
code does something reasonable. */
retval = "";
}
return retval;
}
/* read the whole symbol table of a given bfd. */
static void
read_xcoff_symtab (objfile, nsyms)
struct objfile *objfile; /* Object file we're reading from */
int nsyms; /* # of symbols */
{
bfd *abfd = objfile->obfd;
char *raw_auxptr; /* Pointer to first raw aux entry for sym */
sec_ptr textsec; /* Pointer to text section */
TracebackInfo *ptb; /* Pointer to traceback table */
struct internal_syment symbol[1];
union internal_auxent main_aux;
struct coff_symbol cs[1];
CORE_ADDR file_start_addr = 0;
CORE_ADDR file_end_addr = 0;
int next_file_symnum = -1;
int just_started = 1;
int depth = 0;
int toc_offset = 0; /* toc offset value in data section. */
int val;
int fcn_last_line;
int fcn_start_addr;
long fcn_line_offset;
size_t size;
struct coff_symbol fcn_stab_saved;
/* fcn_cs_saved is global because process_xcoff_symbol needs it. */
union internal_auxent fcn_aux_saved;
struct type *fcn_type_saved = NULL;
struct context_stack *new;
char *filestring = " _start_ "; /* Name of the current file. */
char *last_csect_name; /* last seen csect's name and value */
CORE_ADDR last_csect_val;
int last_csect_sec;
int misc_func_recorded; /* true if any misc. function */
current_objfile = objfile;
/* Get the appropriate COFF "constants" related to the file we're
handling. */
N_TMASK = coff_data (abfd)->local_n_tmask;
N_BTSHFT = coff_data (abfd)->local_n_btshft;
local_symesz = coff_data (abfd)->local_symesz;
last_source_file = NULL;
last_csect_name = 0;
last_csect_val = 0;
misc_func_recorded = 0;
start_stabs ();
start_symtab (filestring, (char *)NULL, file_start_addr);
symnum = 0;
first_object_file_end = 0;
/* Allocate space for the entire symbol table at once, and read it
all in. The bfd is already positioned at the beginning of
the symbol table. */
size = coff_data (abfd)->local_symesz * nsyms;
symtbl = xmalloc (size);
symtbl_num_syms = nsyms;
val = bfd_read (symtbl, size, 1, abfd);
if (val != size)
perror_with_name ("reading symbol table");
raw_symbol = symtbl;
textsec = bfd_get_section_by_name (abfd, ".text");
if (!textsec)
{
printf_unfiltered ("Unable to locate text section!\n");
}
next_symbol_text_func = xcoff_next_symbol_text;
while (symnum < nsyms)
{
QUIT; /* make this command interruptable. */
/* READ_ONE_SYMBOL (symbol, cs, symname_alloced); */
/* read one symbol into `cs' structure. After processing the
whole symbol table, only string table will be kept in memory,
symbol table and debug section of xcoff will be freed. Thus
we can mark symbols with names in string table as
`alloced'. */
{
int ii;
/* Swap and align the symbol into a reasonable C structure. */
bfd_coff_swap_sym_in (abfd, raw_symbol, symbol);
cs->c_symnum = symnum;
cs->c_naux = symbol->n_numaux;
if (symbol->n_zeroes)
{
symname_alloced = 0;
/* We must use the original, unswapped, name here so the name field
pointed to by cs->c_name will persist throughout xcoffread. If
we use the new field, it gets overwritten for each symbol. */
cs->c_name = ((struct external_syment *)raw_symbol)->e.e_name;
/* If it's exactly E_SYMNMLEN characters long it isn't
'\0'-terminated. */
if (cs->c_name[E_SYMNMLEN - 1] != '\0')
{
char *p;
p = obstack_alloc (&objfile->symbol_obstack, E_SYMNMLEN + 1);
strncpy (p, cs->c_name, E_SYMNMLEN);
p[E_SYMNMLEN] = '\0';
cs->c_name = p;
symname_alloced = 1;
}
}
else if (symbol->n_sclass & 0x80)
{
cs->c_name = debugsec + symbol->n_offset;
symname_alloced = 0;
}
else
{
/* in string table */
cs->c_name = strtbl + (int)symbol->n_offset;
symname_alloced = 1;
}
cs->c_value = symbol->n_value;
cs->c_sclass = symbol->n_sclass;
cs->c_secnum = symbol->n_scnum;
cs->c_type = (unsigned)symbol->n_type;
raw_symbol += coff_data (abfd)->local_symesz;
++symnum;
/* Save addr of first aux entry. */
raw_auxptr = raw_symbol;
/* Skip all the auxents associated with this symbol. */
for (ii = symbol->n_numaux; ii; --ii)
{
raw_symbol += coff_data (abfd)->local_auxesz;
++symnum;
}
}
/* if symbol name starts with ".$" or "$", ignore it. */
if (cs->c_name[0] == '$'
|| (cs->c_name[1] == '$' && cs->c_name[0] == '.'))
continue;
if (cs->c_symnum == next_file_symnum && cs->c_sclass != C_FILE)
{
if (last_source_file)
{
end_symtab (cur_src_end_addr, 1, 0, objfile, SECT_OFF_TEXT);
end_stabs ();
}
start_stabs ();
start_symtab ("_globals_", (char *)NULL, (CORE_ADDR)0);
cur_src_end_addr = first_object_file_end;
/* done with all files, everything from here on is globals */
}
/* if explicitly specified as a function, treat is as one. */
if (ISFCN(cs->c_type) && cs->c_sclass != C_TPDEF)
{
bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
0, cs->c_naux, &main_aux);
goto function_entry_point;
}
if ((cs->c_sclass == C_EXT || cs->c_sclass == C_HIDEXT)
&& cs->c_naux == 1)
{
/* Dealing with a symbol with a csect entry. */
#define CSECT(PP) ((PP)->x_csect)
#define CSECT_LEN(PP) (CSECT(PP).x_scnlen.l)
#define CSECT_ALIGN(PP) (SMTYP_ALIGN(CSECT(PP).x_smtyp))
#define CSECT_SMTYP(PP) (SMTYP_SMTYP(CSECT(PP).x_smtyp))
#define CSECT_SCLAS(PP) (CSECT(PP).x_smclas)
/* Convert the auxent to something we can access. */
bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
0, cs->c_naux, &main_aux);
switch (CSECT_SMTYP (&main_aux))
{
case XTY_ER:
/* Ignore all external references. */
continue;
case XTY_SD:
/* A section description. */
{
switch (CSECT_SCLAS (&main_aux))
{
case XMC_PR:
{
/* A program csect is seen. We have to allocate one
symbol table for each program csect. Normally gdb
prefers one symtab for each source file. In case
of AIX, one source file might include more than one
[PR] csect, and they don't have to be adjacent in
terms of the space they occupy in memory. Thus, one
single source file might get fragmented in the
memory and gdb's file start and end address
approach does not work! GCC (and I think xlc) seem
to put all the code in the unnamed program csect. */
if (last_csect_name)
{
/* If no misc. function recorded in the last
seen csect, enter it as a function. This
will take care of functions like strcmp()
compiled by xlc. */
if (!misc_func_recorded)
{
int alloced = 0;
RECORD_MINIMAL_SYMBOL
(last_csect_name, last_csect_val,
mst_text, alloced, last_csect_sec,
objfile);
}
complete_symtab (filestring, file_start_addr);
cur_src_end_addr = file_end_addr;
end_symtab (file_end_addr, 1, 0, objfile,
SECT_OFF_TEXT);
end_stabs ();
start_stabs ();
/* Give all csects for this source file the same
name. */
start_symtab (filestring, NULL, (CORE_ADDR)0);
}
/* If this is the very first csect seen,
basically `__start'. */
if (just_started)
{
first_object_file_end
= cs->c_value + CSECT_LEN (&main_aux);
just_started = 0;
}
file_start_addr = cs->c_value;
file_end_addr = cs->c_value + CSECT_LEN (&main_aux);
if (cs->c_name && cs->c_name[0] == '.')
{
last_csect_name = cs->c_name;
last_csect_val = cs->c_value;
last_csect_sec = cs_to_section (cs, objfile);
}
}
misc_func_recorded = 0;
continue;
case XMC_RW :
break;
/* If the section is not a data description,
ignore it. Note that uninitialized data will
show up as XTY_CM/XMC_RW pair. */
case XMC_TC0:
if (toc_offset)
warning ("More than one xmc_tc0 symbol found.");
toc_offset = cs->c_value;
continue;
case XMC_TC:
#ifdef STATIC_NODEBUG_VARS
/* We need to process these symbols if they are C_HIDEXT,
for static variables in files compiled without -g. */
if (cs->c_sclass == C_HIDEXT)
break;
else
#endif
continue;
default:
/* Ignore the symbol. */
continue;
}
}
break;
case XTY_LD:
switch (CSECT_SCLAS (&main_aux))
{
case XMC_PR:
/* a function entry point. */
function_entry_point:
RECORD_MINIMAL_SYMBOL
(cs->c_name, cs->c_value, mst_text,
symname_alloced, cs_to_section (cs, objfile),
objfile);
fcn_line_offset = main_aux.x_sym.x_fcnary.x_fcn.x_lnnoptr;
fcn_start_addr = cs->c_value;
/* save the function header info, which will be used
when `.bf' is seen. */
fcn_cs_saved = *cs;
fcn_aux_saved = main_aux;
ptb = NULL;
/* If function has two auxent, then debugging information is
already available for it. Process traceback table for
functions with only one auxent. */
if (cs->c_naux == 1)
ptb = retrieve_tracebackinfo (abfd, textsec, cs);
else if (cs->c_naux != 2)
{
static struct complaint msg =
{"Expected one or two auxents for function", 0, 0};
complain (&msg);
}
/* If there is traceback info, create and add parameters
for it. */
if (ptb && (ptb->fixedparms || ptb->floatparms))
{
int parmcnt = ptb->fixedparms + ptb->floatparms;
char *parmcode = (char*) &ptb->parminfo;
/* The link area is 0x18 bytes. */
int parmvalue = ptb->framesize + 0x18;
unsigned int ii, mask;
for (ii=0, mask = 0x80000000; ii <parmcnt; ++ii)
{
struct symbol *parm;
if (ptb->parminfo & mask)
{
/* float or double */
mask = mask >> 1;
if (ptb->parminfo & mask)
{
/* double parm */
ADD_PARM_TO_PENDING
(parm, parmvalue, builtin_type_double,
local_symbols);
parmvalue += sizeof (double);
}
else
{
/* float parm */
ADD_PARM_TO_PENDING
(parm, parmvalue, builtin_type_float,
local_symbols);
parmvalue += sizeof (float);
}
}
else
{
static struct type *intparm_type;
if (intparm_type == NULL)
{
/* Create a type, which is a pointer
type (a kludge to make it print
in hex), but which has a name
indicating we don't know the real
type. */
intparm_type =
init_type
(TYPE_CODE_PTR,
TARGET_PTR_BIT / HOST_CHAR_BIT,
0,
"<non-float parameter>",
NULL);
TYPE_TARGET_TYPE (intparm_type) =
builtin_type_void;
}
ADD_PARM_TO_PENDING
(parm, parmvalue,
intparm_type,
local_symbols);
parmvalue += sizeof (int);
}
mask = mask >> 1;
}
/* Fake this as a function. Needed in
process_xcoff_symbol(). */
cs->c_type = 32;
finish_block
(process_xcoff_symbol (cs, objfile), &local_symbols,
pending_blocks, cs->c_value,
cs->c_value + ptb->fsize, objfile);
}
continue;
case XMC_GL:
/* shared library function trampoline code entry point. */
/* record trampoline code entries as
mst_solib_trampoline symbol. When we lookup mst
symbols, we will choose mst_text over
mst_solib_trampoline. */
RECORD_MINIMAL_SYMBOL
(cs->c_name, cs->c_value,
mst_solib_trampoline,
symname_alloced, cs_to_section (cs, objfile), objfile);
continue;
case XMC_DS:
/* The symbols often have the same names as debug symbols for
functions, and confuse lookup_symbol. */
continue;
default:
/* xlc puts each variable in a separate csect, so we get
an XTY_SD for each variable. But gcc puts several
variables in a csect, so that each variable only gets
an XTY_LD. We still need to record them. This will
typically be XMC_RW; I suspect XMC_RO and XMC_BS might
be possible too. */
break;
}
default:
break;
}
}
switch (cs->c_sclass)
{
case C_FILE:
/* see if the last csect needs to be recorded. */
if (last_csect_name && !misc_func_recorded)
{
/* If no misc. function recorded in the last seen csect, enter
it as a function. This will take care of functions like
strcmp() compiled by xlc. */
int alloced = 0;
RECORD_MINIMAL_SYMBOL
(last_csect_name, last_csect_val,
mst_text, alloced, last_csect_sec, objfile);
}
/* c_value field contains symnum of next .file entry in table
or symnum of first global after last .file. */
next_file_symnum = cs->c_value;
/* Complete symbol table for last object file containing
debugging information. */
/* Whether or not there was a csect in the previous file, we
have to call `end_stabs' and `start_stabs' to reset
type_vector, line_vector, etc. structures. */
complete_symtab (filestring, file_start_addr);
cur_src_end_addr = file_end_addr;
end_symtab (file_end_addr, 1, 0, objfile, SECT_OFF_TEXT);
end_stabs ();
/* XCOFF, according to the AIX 3.2 documentation, puts the filename
in cs->c_name. But xlc 1.3.0.2 has decided to do things the
standard COFF way and put it in the auxent. We use the auxent if
the symbol is ".file" and an auxent exists, otherwise use the symbol
itself. Simple enough. */
if (!strcmp (cs->c_name, ".file") && cs->c_naux > 0)
{
bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
0, cs->c_naux, &main_aux);
filestring = coff_getfilename (&main_aux);
}
else
filestring = cs->c_name;
start_stabs ();
start_symtab (filestring, (char *)NULL, (CORE_ADDR)0);
last_csect_name = 0;
/* reset file start and end addresses. A compilation unit with no text
(only data) should have zero file boundaries. */
file_start_addr = file_end_addr = 0;
break;
case C_FUN:
fcn_stab_saved = *cs;
break;
case C_FCN:
if (STREQ (cs->c_name, ".bf"))
{
bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
0, cs->c_naux, &main_aux);
within_function = 1;
mark_first_line (fcn_line_offset, cs->c_symnum);
new = push_context (0, fcn_start_addr);
new->name = define_symbol
(fcn_cs_saved.c_value, fcn_stab_saved.c_name, 0, 0, objfile);
if (new->name != NULL)
SYMBOL_SECTION (new->name) = cs_to_section (cs, objfile);
}
else if (STREQ (cs->c_name, ".ef"))
{
bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
0, cs->c_naux, &main_aux);
/* The value of .ef is the address of epilogue code;
not useful for gdb. */
/* { main_aux.x_sym.x_misc.x_lnsz.x_lnno
contains number of lines to '}' */
fcn_last_line = main_aux.x_sym.x_misc.x_lnsz.x_lnno;
new = pop_context ();
/* Stack must be empty now. */
if (context_stack_depth > 0 || new == NULL)
{
complain (&ef_complaint, cs->c_symnum);
within_function = 0;
break;
}
finish_block (new->name, &local_symbols, new->old_blocks,
new->start_addr,
fcn_cs_saved.c_value +
fcn_aux_saved.x_sym.x_misc.x_fsize, objfile);
within_function = 0;
}
break;
case C_BSTAT:
/* Begin static block. */
{
struct internal_syment symbol;
struct coff_symbol csymbol;
read_symbol (&symbol, cs->c_value);
static_block_base = symbol.n_value;
csymbol.c_secnum = symbol.n_scnum;
static_block_section = cs_to_section (&csymbol, objfile);
}
break;
case C_ESTAT:
/* End of static block. */
static_block_base = 0;
static_block_section = -1;
break;
case C_ARG:
case C_REGPARM:
case C_REG:
case C_TPDEF:
case C_STRTAG:
case C_UNTAG:
case C_ENTAG:
{
static struct complaint msg =
{"Unrecognized storage class %d.", 0, 0};
complain (&msg, cs->c_sclass);
}
break;
case C_LABEL:
case C_NULL:
/* Ignore these. */
break;
/* This is wrong. These symbols are XMC_TC, which means that
the value of the symbol is the address of the TOC entry, not
the address of the variable itself. */
case C_HIDEXT:
#ifdef STATIC_NODEBUG_VARS
{
/* This is the only place that static variables show up in files
compiled without -g. External variables also have a C_EXT,
so that is why we record everything as mst_file_* here. */
enum minimal_symbol_type ms_type;
CORE_ADDR tmpaddr;
int sec;
sec = cs_to_section (cs, objfile);
tmpaddr = cs->c_value;
switch (sec)
{
case SECT_OFF_TEXT:
case SECT_OFF_RODATA:
ms_type = mst_file_text;
break;
case SECT_OFF_DATA:
ms_type = mst_file_data;
break;
case SECT_OFF_BSS:
ms_type = mst_file_bss;
break;
default:
ms_type = mst_unknown;
break;
}
RECORD_MINIMAL_SYMBOL (cs->c_name, cs->c_value, ms_type,
symname_alloced, sec, objfile);
}
#endif /* STATIC_NODEBUG_VARS */
break;
case C_BINCL:
/* beginning of include file */
/* In xlc output, C_BINCL/C_EINCL pair doesn't show up in sorted
order. Thus, when wee see them, we might not know enough info
to process them. Thus, we'll be saving them into a table
(inclTable) and postpone their processing. */
record_include_begin (cs);
break;
case C_EINCL:
/* End of include file. */
/* See the comment after case C_BINCL. */
record_include_end (cs);
break;
case C_BLOCK:
if (STREQ (cs->c_name, ".bb"))
{
depth++;
new = push_context (depth, cs->c_value);
}
else if (STREQ (cs->c_name, ".eb"))
{
new = pop_context ();
if (depth-- != new->depth)
{
complain (&eb_complaint, symnum);
break;
}
if (local_symbols && context_stack_depth > 0)
{
/* Make a block for the local symbols within. */
finish_block (new->name, &local_symbols, new->old_blocks,
new->start_addr, cs->c_value, objfile);
}
local_symbols = new->locals;
}
break;
default:
process_xcoff_symbol (cs, objfile);
break;
}
}
if (last_source_file)
{
end_symtab (cur_src_end_addr, 1, 0, objfile, SECT_OFF_TEXT);
end_stabs ();
}
free (symtbl);
current_objfile = NULL;
/* Record the toc offset value of this symbol table into ldinfo structure.
If no XMC_TC0 is found, toc_offset should be zero. Another place to obtain
this information would be file auxiliary header. */
#ifndef FAKING_RS6000
xcoff_add_toc_to_loadinfo (toc_offset);
#endif
}
#define SYMBOL_DUP(SYMBOL1, SYMBOL2) \
(SYMBOL2) = (struct symbol *) \
obstack_alloc (&objfile->symbol_obstack, sizeof (struct symbol)); \
*(SYMBOL2) = *(SYMBOL1);
#define SYMNAME_ALLOC(NAME, ALLOCED) \
(ALLOCED) ? (NAME) : obstack_copy0 (&objfile->symbol_obstack, (NAME), strlen (NAME));
static struct type *func_symbol_type;
static struct type *var_symbol_type;
/* process one xcoff symbol. */
static struct symbol *
process_xcoff_symbol (cs, objfile)
register struct coff_symbol *cs;
struct objfile *objfile;
{
struct symbol onesymbol;
register struct symbol *sym = &onesymbol;
struct symbol *sym2 = NULL;
struct type *ttype;
char *name, *pp, *qq;
int struct_and_type_combined;
int nameless;
name = cs->c_name;
if (name[0] == '.')
++name;
memset (sym, '\0', sizeof (struct symbol));
/* default assumptions */
SYMBOL_VALUE (sym) = cs->c_value;
SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
SYMBOL_SECTION (sym) = cs_to_section (cs, objfile);
if (ISFCN (cs->c_type))
{
/* At this point, we don't know the type of the function. This
will be patched with the type from its stab entry later on in
patch_block_stabs (), unless the file was compiled without -g. */
SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
SYMBOL_TYPE (sym) = func_symbol_type;
SYMBOL_CLASS (sym) = LOC_BLOCK;
SYMBOL_DUP (sym, sym2);
if (cs->c_sclass == C_EXT)
add_symbol_to_list (sym2, &global_symbols);
else if (cs->c_sclass == C_HIDEXT || cs->c_sclass == C_STAT)
add_symbol_to_list (sym2, &file_symbols);
}
else
{
/* In case we can't figure out the type, provide default. */
SYMBOL_TYPE (sym) = var_symbol_type;
switch (cs->c_sclass)
{
#if 0
case C_FUN:
if (fcn_cs_saved.c_sclass == C_EXT)
add_stab_to_list (name, &global_stabs);
else
add_stab_to_list (name, &file_stabs);
break;
#endif
case C_GSYM:
add_stab_to_list (name, &global_stabs);
break;
case C_BCOMM:
common_block_start (cs->c_name, objfile);
break;
case C_ECOMM:
common_block_end (objfile);
break;
default:
complain (&storclass_complaint, cs->c_sclass);
/* FALLTHROUGH */
case C_DECL:
case C_PSYM:
case C_RPSYM:
case C_ECOML:
sym = define_symbol (cs->c_value, cs->c_name, 0, 0, objfile);
if (sym != NULL)
{
SYMBOL_SECTION (sym) = cs_to_section (cs, objfile);
}
return sym;
case C_STSYM:
/* For xlc (not GCC), the 'V' symbol descriptor is used for
all statics and we need to distinguish file-scope versus
function-scope using within_function. We do this by
changing the string we pass to define_symbol to use 'S'
where we need to, which is not necessarily super-clean,
but seems workable enough. */
if (*name == ':' || (pp = (char *) strchr(name, ':')) == NULL)
return NULL;
++pp;
if (*pp == 'V' && !within_function)
*pp = 'S';
sym = define_symbol (cs->c_value, cs->c_name, 0, 0, objfile);
if (sym != NULL)
{
SYMBOL_VALUE (sym) += static_block_base;
SYMBOL_SECTION (sym) = static_block_section;
}
return sym;
case C_LSYM:
sym = define_symbol (cs->c_value, cs->c_name, 0, N_LSYM, objfile);
if (sym != NULL)
{
SYMBOL_SECTION (sym) = cs_to_section (cs, objfile);
}
return sym;
case C_AUTO:
SYMBOL_CLASS (sym) = LOC_LOCAL;
SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
SYMBOL_SECTION (sym) = cs_to_section (cs, objfile);
SYMBOL_DUP (sym, sym2);
add_symbol_to_list (sym2, &local_symbols);
break;
case C_EXT:
SYMBOL_CLASS (sym) = LOC_STATIC;
SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
SYMBOL_SECTION (sym) = cs_to_section (cs, objfile);
SYMBOL_DUP (sym, sym2);
add_symbol_to_list (sym2, &global_symbols);
break;
case C_STAT:
SYMBOL_CLASS (sym) = LOC_STATIC;
SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
SYMBOL_SECTION (sym) = cs_to_section (cs, objfile);
SYMBOL_DUP (sym, sym2);
add_symbol_to_list
(sym2, within_function ? &local_symbols : &file_symbols);
break;
case C_RSYM:
pp = (char*) strchr (name, ':');
if (pp)
{
sym = define_symbol (cs->c_value, cs->c_name, 0, 0, objfile);
if (sym != NULL)
SYMBOL_SECTION (sym) = cs_to_section (cs, objfile);
return sym;
}
else
{
complain (&rsym_complaint, name);
return NULL;
}
}
}
return sym2;
}
/* Extract the file name from the aux entry of a C_FILE symbol. Return
only the last component of the name. Result is in static storage and
is only good for temporary use. */
static char *
coff_getfilename (aux_entry)
union internal_auxent *aux_entry;
{
static char buffer[BUFSIZ];
register char *temp;
char *result;
if (aux_entry->x_file.x_n.x_zeroes == 0)
strcpy (buffer, strtbl + aux_entry->x_file.x_n.x_offset);
else
{
strncpy (buffer, aux_entry->x_file.x_fname, FILNMLEN);
buffer[FILNMLEN] = '\0';
}
result = buffer;
/* FIXME: We should not be throwing away the information about what
directory. It should go into dirname of the symtab, or some such
place. */
if ((temp = strrchr (result, '/')) != NULL)
result = temp + 1;
return (result);
}
/* Set *SYMBOL to symbol number symno in symtbl. */
static void
read_symbol (symbol, symno)
struct internal_syment *symbol;
int symno;
{
if (symno < 0 || symno >= symtbl_num_syms)
{
static struct complaint msg =
{"Invalid symbol offset", 0, 0};
complain (&msg);
symbol->n_value = 0;
symbol->n_scnum = -1;
return;
}
bfd_coff_swap_sym_in (symfile_bfd, symtbl + (symno*local_symesz), symbol);
}
/* Get value corresponding to symbol number symno in symtbl. */
static int
read_symbol_nvalue (symno)
int symno;
{
struct internal_syment symbol[1];
read_symbol (symbol, symno);
return symbol->n_value;
}
/* Find the address of the function corresponding to symno, where
symno is the symbol pointed to by the linetable. */
static int
read_symbol_lineno (symno)
int symno;
{
struct internal_syment symbol[1];
union internal_auxent main_aux[1];
/* Note that just searching for a short distance (e.g. 50 symbols)
is not enough, at least in the following case.
.extern foo
[many .stabx entries]
[a few functions, referring to foo]
.globl foo
.bf
What happens here is that the assembler moves the .stabx entries
to right before the ".bf" for foo, but the symbol for "foo" is before
all the stabx entries. See PR gdb/2222. */
while (symno < symtbl_num_syms) {
bfd_coff_swap_sym_in (symfile_bfd,
symtbl + (symno*local_symesz), symbol);
if (symbol->n_sclass == C_FCN && STREQ (symbol->n_name, ".bf"))
goto gotit;
symno += symbol->n_numaux+1;
}
complain (&bf_notfound_complaint);
return 0;
gotit:
/* take aux entry and return its lineno */
symno++;
bfd_coff_swap_aux_in (symfile_bfd, symtbl+(symno*local_symesz),
symbol->n_type, symbol->n_sclass,
0, symbol->n_numaux, main_aux);
return main_aux->x_sym.x_misc.x_lnsz.x_lnno;
}
/* Support for line number handling */
/* This function is called for every section; it finds the outer limits
* of the line table (minimum and maximum file offset) so that the
* mainline code can read the whole thing for efficiency.
*/
static void
find_linenos(abfd, asect, vpinfo)
bfd *abfd;
sec_ptr asect;
PTR vpinfo;
{
struct coff_symfile_info *info;
int size, count;
file_ptr offset, maxoff;
count = asect->lineno_count;
if (!STREQ (asect->name, ".text") || count == 0)
return;
size = count * coff_data (symfile_bfd)->local_linesz;
info = (struct coff_symfile_info *)vpinfo;
offset = asect->line_filepos;
maxoff = offset + size;
if (offset < info->min_lineno_offset || info->min_lineno_offset == 0)
info->min_lineno_offset = offset;
if (maxoff > info->max_lineno_offset)
info->max_lineno_offset = maxoff;
}
/* Read in all the line numbers for fast lookups later. Leave them in
external (unswapped) format in memory; we'll swap them as we enter
them into GDB's data structures. */
static int
init_lineno (abfd, offset, size)
bfd *abfd;
file_ptr offset;
int size;
{
int val;
free_linetab ();
if (bfd_seek(abfd, offset, L_SET) < 0)
return -1;
linetab = (char *) xmalloc(size);
val = bfd_read(linetab, 1, size, abfd);
if (val != size)
return -1;
linetab_offset = offset;
linetab_size = size;
return 0;
}
static void
free_linetab ()
{
if (linetab)
free (linetab);
linetab = NULL;
}
static void
xcoff_new_init (objfile)
struct objfile *objfile;
{
}
/* xcoff_symfile_init()
is the xcoff-specific initialization routine for reading symbols.
It is passed an objfile which contains, among other things,
the BFD for the file whose symbols are being read, and a slot for
a pointer to "private data" which we fill with cookies and other
treats for xcoff_symfile_read().
We will only be called if this is an XCOFF or XCOFF-like file.
BFD handles figuring out the format of the file, and code in symfile.c
uses BFD's determination to vector to us.
The ultimate result is a new symtab (or, FIXME, eventually a psymtab). */
static void
xcoff_symfile_init (objfile)
struct objfile *objfile;
{
bfd *abfd = objfile->obfd;
/* Allocate struct to keep track of the symfile */
objfile -> sym_private = xmmalloc (objfile -> md,
sizeof (struct coff_symfile_info));
init_entry_point_info (objfile);
}
/* Perform any local cleanups required when we are done with a particular
objfile. I.E, we are in the process of discarding all symbol information
for an objfile, freeing up all memory held for it, and unlinking the
objfile struct from the global list of known objfiles. */
static void
xcoff_symfile_finish (objfile)
struct objfile *objfile;
{
if (objfile -> sym_private != NULL)
{
mfree (objfile -> md, objfile -> sym_private);
}
/* Start with a fresh include table for the next objfile. */
if (inclTable)
{
free (inclTable);
inclTable = NULL;
}
inclIndx = inclLength = inclDepth = 0;
}
static int
init_stringtab(abfd, offset, objfile)
bfd *abfd;
file_ptr offset;
struct objfile *objfile;
{
long length;
int val;
unsigned char lengthbuf[4];
if (bfd_seek(abfd, offset, L_SET) < 0)
return -1;
val = bfd_read((char *)lengthbuf, 1, sizeof lengthbuf, abfd);
length = bfd_h_get_32(abfd, lengthbuf);
/* If no string table is needed, then the file may end immediately
after the symbols. Just return with `strtbl' set to null. */
if (val != sizeof length || length < sizeof length)
return 0;
/* Allocate string table from symbol_obstack. We will need this table
as long as we have its symbol table around. */
strtbl = (char*) obstack_alloc (&objfile->symbol_obstack, length);
if (strtbl == NULL)
return -1;
memcpy(strtbl, &length, sizeof length);
if (length == sizeof length)
return 0;
val = bfd_read(strtbl + sizeof length, 1, length - sizeof length, abfd);
if (val != length - sizeof length || strtbl[length - 1] != '\0')
return -1;
return 0;
}
static int
init_debugsection(abfd)
bfd *abfd;
{
register sec_ptr secp;
bfd_size_type length;
if (debugsec) {
free(debugsec);
debugsec = NULL;
}
secp = bfd_get_section_by_name(abfd, ".debug");
if (!secp)
return 0;
if (!(length = bfd_section_size(abfd, secp)))
return 0;
debugsec = (char *) xmalloc ((unsigned)length);
if (debugsec == NULL)
return -1;
if (!bfd_get_section_contents(abfd, secp, debugsec, (file_ptr) 0, length)) {
printf_unfiltered ("Can't read .debug section from symbol file\n");
return -1;
}
return 0;
}
static void
free_debugsection()
{
if (debugsec)
free(debugsec);
debugsec = NULL;
}
/* xcoff version of symbol file read. */
static void
xcoff_symfile_read (objfile, section_offset, mainline)
struct objfile *objfile;
struct section_offsets *section_offset;
int mainline;
{
int num_symbols; /* # of symbols */
file_ptr symtab_offset; /* symbol table and */
file_ptr stringtab_offset; /* string table file offsets */
int val;
bfd *abfd;
struct coff_symfile_info *info;
char *name;
struct cleanup *back_to = make_cleanup (null_cleanup, 0);
info = (struct coff_symfile_info *) objfile -> sym_private;
symfile_bfd = abfd = objfile->obfd;
name = objfile->name;
num_symbols = bfd_get_symcount (abfd); /* # of symbols */
symtab_offset = obj_sym_filepos (abfd); /* symbol table file offset */
stringtab_offset = symtab_offset +
num_symbols * coff_data(abfd)->local_symesz;
info->min_lineno_offset = 0;
info->max_lineno_offset = 0;
bfd_map_over_sections (abfd, find_linenos, info);
/* FIXME! This stuff should move into symfile_init */
if (info->min_lineno_offset != 0
&& info->max_lineno_offset > info->min_lineno_offset) {
/* only read in the line # table if one exists */
make_cleanup (free_linetab, 0);
val = init_lineno(abfd, info->min_lineno_offset,
(int) (info->max_lineno_offset - info->min_lineno_offset));
if (val < 0)
error("\"%s\": error reading line numbers\n", name);
}
if (num_symbols > 0)
{
val = init_stringtab(abfd, stringtab_offset, objfile);
if (val < 0) {
error ("\"%s\": can't get string table", name);
}
if (init_debugsection(abfd) < 0) {
error ("Error reading .debug section of `%s'\n", name);
}
}
/* Position to read the symbol table. Do not read it all at once. */
val = bfd_seek(abfd, symtab_offset, L_SET);
if (val < 0)
perror_with_name(name);
if (bfd_tell(abfd) != symtab_offset)
fatal("bfd? BFD!");
init_minimal_symbol_collection ();
make_cleanup (discard_minimal_symbols, 0);
#ifndef FAKING_RS6000
/* Initialize load info structure. */
if (mainline)
xcoff_init_loadinfo ();
#endif
/* Now that the executable file is positioned at symbol table,
process it and define symbols accordingly. */
read_xcoff_symtab(objfile, num_symbols);
/* Free debug section. */
free_debugsection ();
/* Sort symbols alphabetically within each block. */
{
struct symtab *s;
for (s = objfile -> symtabs; s != NULL; s = s -> next)
{
sort_symtab_syms (s);
}
}
/* Install any minimal symbols that have been collected as the current
minimal symbols for this objfile. */
install_minimal_symbols (objfile);
do_cleanups (back_to);
}
static struct section_offsets *
xcoff_symfile_offsets (objfile, addr)
struct objfile *objfile;
CORE_ADDR addr;
{
struct section_offsets *section_offsets;
int i;
objfile->num_sections = SECT_OFF_MAX;
section_offsets = (struct section_offsets *)
obstack_alloc
(&objfile -> psymbol_obstack,
sizeof (struct section_offsets)
+ sizeof (section_offsets->offsets) * objfile->num_sections);
/* syms_from_objfile kindly subtracts from addr the bfd_section_vma
of the .text section. This strikes me as wrong--whether the
offset to be applied to symbol reading is relative to the start
address of the section depends on the symbol format. In any
event, this whole "addr" concept is pretty broken (it doesn't
handle any section but .text sensibly), so just ignore the addr
parameter and use 0. That matches the fact that xcoff_symfile_read
ignores the section_offsets). */
for (i = 0; i < objfile->num_sections; ++i)
ANOFFSET (section_offsets, i) = 0;
return section_offsets;
}
/* Register our ability to parse symbols for xcoff BFD files. */
static struct sym_fns xcoff_sym_fns =
{
/* Because the bfd uses coff_flavour, we need to specially kludge
the flavour. It is possible that coff and xcoff should be merged as
they do have fundamental similarities (for example, the extra storage
classes used for stabs could presumably be recognized in any COFF file).
However, in addition to obvious things like all the csect hair, there are
some subtler differences between xcoffread.c and coffread.c, notably
the fact that coffread.c has no need to read in all the symbols, but
xcoffread.c reads all the symbols and does in fact randomly access them
(in C_BSTAT and B_BINCL processing). */
(enum bfd_flavour)-1,
xcoff_new_init, /* sym_new_init: init anything gbl to entire symtab */
xcoff_symfile_init, /* sym_init: read initial info, setup for sym_read() */
xcoff_symfile_read, /* sym_read: read a symbol file into symtab */
xcoff_symfile_finish, /* sym_finish: finished with file, cleanup */
xcoff_symfile_offsets, /* sym_offsets: xlate offsets ext->int form */
NULL /* next: pointer to next struct sym_fns */
};
void
_initialize_xcoffread ()
{
add_symtab_fns(&xcoff_sym_fns);
/* Initialize symbol template later used for arguments. Its other
fields are zero, or are filled in later. */
SYMBOL_NAME (&parmsym) = "";
SYMBOL_INIT_LANGUAGE_SPECIFIC (&parmsym, language_c);
SYMBOL_NAMESPACE (&parmsym) = VAR_NAMESPACE;
SYMBOL_CLASS (&parmsym) = LOC_ARG;
func_symbol_type = init_type (TYPE_CODE_FUNC, 1, 0,
"<function, no debug info>", NULL);
TYPE_TARGET_TYPE (func_symbol_type) = builtin_type_int;
var_symbol_type =
init_type (TYPE_CODE_INT, TARGET_INT_BIT / HOST_CHAR_BIT, 0,
"<variable, no debug info>", NULL);
}