binutils-gdb/sim/v850/ChangeLog
Andrew Cagney 7ef2d4e783 * Makefile.in (simops.h, table.c): Delete targets.
(tmp-gencode, gencode.o, gencode): Delete targets.
(simops.h): New file.
($(BUILT_SRC_FROM_IGEN)): Do not depend on simops.h.
* gencode.c: Delete file.
2001-12-02 19:27:29 +00:00

1103 lines
36 KiB
Plaintext

2001-12-02 Andrew Cagney <ac131313@redhat.com>
* Makefile.in (simops.h, table.c): Delete targets.
(tmp-gencode, gencode.o, gencode): Delete targets.
(simops.h): New file.
($(BUILT_SRC_FROM_IGEN)): Do not depend on simops.h.
* gencode.c: Delete file.
2001-04-15 J.T. Conklin <jtc@redback.com>
* Makefile.in (simops.o): Add simops.h to dependency list.
2001-03-14 Andrew Cagney <ac131313@redhat.com>
* Makefile.in (gencode): Link with libintl.
2001-01-31 Jonathan Larmour <jlarmour@redhat.com>
* Makefile.in (gencode): Link with libopcodes in build tree rather
than building source files from there.
2000-05-30 Nick Clifton <nickc@cygnus.com>
* v850.igen: Remove illegal instruction pattern, since it is the
same as the breakpoint pattern.
Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
2000-04-14 Gary Thomas <gthomas@redhat.com>
* v850.igen: Define 'br *' as illegal since this is the only
way to provide a breakpoint on some v850 family processors.
2000-03-24 Frank Ch. Eigler <fche@redhat.com>
* v850.igen (ilgop): New insn pattern for four-byte breakpoints.
Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
1999-05-08 Felix Lee <flee@cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Tue Dec 1 17:25:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (NL_TARGET): Define as -DNL_TARGET_v850.
Wed Nov 25 17:52:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (simops.o): Depends on targ-vals.h
* simops.c: Include targ-vals.h instead of
libgloss/.../syscall.h. Replace SYS_* with TARGET_SYS_*.
(divn, divun, OP_1C007E0, OP_18207E0, OP_1C207E0,OP_18007E0):
Replace signed long int with signed32.
Fri Oct 9 18:02:25 1998 Doug Evans <devans@canuck.cygnus.com>
* interp.c: #include "itable.h".
(get_insn_name): New function.
(sim_open): Initialize CPU_INSN_NAME,CPU_MAX_INSNS.
* sim-main.h (MAX_INSNS,INSN_NAME): Delete.
Wed May 6 19:43:27 1998 Doug Evans <devans@canuck.cygnus.com>
* sim-main.h (INSN_NAME): New arg `cpu'.
Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Sun Apr 26 15:19:14 1998 Tom Tromey <tromey@cygnus.com>
* acconfig.h: New file.
* configure.in: Reverted change of Apr 24; use sinclude again.
Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Fri Apr 24 11:18:08 1998 Tom Tromey <tromey@cygnus.com>
* configure.in: Don't call sinclude.
Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* sim-main.h (SIM_MAIN_H): Wrap header.
Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Tue Mar 10 15:54:50 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_stop): Delete, second attempt.
Thu Feb 26 19:09:47 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_info): Delete.
Wed Feb 18 10:47:32 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (TRACE_ALU_INPUT*): Delete. Moved to sim-trace.[hc].
* simops.c (trace_result): Call trace_generic instead of
trace_one_insn.
(trace_module): Change variable type to integer.
(trace_input): Initialize trace_module with TRACE_ALU_IDX.
* sim-main.h (trace_module): Change variable decl to integer type.
(TRACE_BRANCH*, TRACE_LD, TRACE_ST): Update.
Tue Feb 17 12:51:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_store_register, sim_fetch_register): Pass in
length parameter. Return -1.
Tue Feb 3 16:24:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (IMEM16, IMEM16_IMMED): Rename IMEM and
IMEM_IMMED. To match recent igen change.
Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Fri Jan 30 09:51:27 1998 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (CPU_CIA): Delete, replaced by.
(CIA_SET, CIA_SET): Define.
Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Fri Dec 5 09:26:08 1997 Nick Clifton <nickc@cygnus.com>
* v850.igen: Revert break value back to its old value.
Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Dec 3 17:27:19 1997 Nick Clifton <nickc@cygnus.com>
* v850.igen: Make break have a zero first field, since otherwise
it clashes with the DIVH instruction.
Sat Nov 22 21:32:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (OP_10007E0): Rename SIGABRT -> SIM_SIGABRT. Give
sim_stopped instead of sim_signalled.
* v850.igen (BREAK), simops.c (OP_12007E0): Rename SIGTRAP to
SIM_SIGTRAP.
(illegal): Rename SIGILL to SIM_SIGILL.
* sim-main.h, simops.c, interp.c: Do not include signal.h.
* sim-main.h: Include sim-signal.h instead of signal.h.
(SIGTRAP, SIGQUIT): Delete definition.
(SIG_V850_EXIT): Delete definition.
Tue Nov 18 15:33:48 1997 Doug Evans <devans@canuck.cygnus.com>
* Makefile.in (SIM_OBJS): Use $(SIM_NEW_COMMON_OBJS).
Fri Oct 31 10:33:40 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_open): Check state magic number.
(sim-assert.h): Include.
Tue Oct 28 11:06:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
* v850.igen: Add model filter field to records.
Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Fri Sep 26 11:56:02 1997 Felix Lee <flee@cygnus.com>
* sim-main.h: delete null override of SIM_ENGINE_HALT_HOOK and
SIM_ENGINE_RESTART_HOOK.
Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Sep 24 17:28:26 1997 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (WITH_TARGET_WORD_MSB): Delete.
* configure.in (SIM_AC_OPTION_BITSIZE): Specify 32 bit
architecture with MSB == 31.
Wed Sep 24 14:04:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
* v850.igen: Make divh insn with RRRRR==0 breakpoint.
Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Tue Sep 23 10:19:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (SIM_WARNINGS, SIM_ALIGNMENT, SIM_ENDIAN,
SIM_HOSTENDIAN, SIM_RESERVED_BITS): Delete, moved to common.
(SIM_EXTRA_CFLAGS): Update.
Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* configure.in: Really specify NONSTRICT_ALIGNMENT as the default.
Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in: Specify NONSTRICT_ALIGNMENT as the default.
* configure: Regenerated to track ../common/aclocal.m4 changes.
Fri Sep 19 10:37:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
* v850.igen (disp16): Use EXTEND16 to sign extend disp.
(disp22): Only shift left by 1, not 2.
("jmp"): Ensure PC is 2 byte aligned.
* simops.c, v850.igen: Move "Bcond", "jr", "jarl" code to
v850.igen. Fix tracing.
* simops.c (OP_300, OP_400, OP_500): Move "sdl.b", "sld.h",
"sld.w" insns to v850.igen. Fix tracing.
(OP_70): Ditto for "sld.hu".
* v850.igen: Clarify tracing of "sld.b", "sld.h" et.al.
* simops.c (condition_met): Make global.
* sim-main.h (TRACE_ALU_INPUT3, TRACE_BRANCH0, TRACE_LD,
TRACE_ST): Define.
(TRACE_LD_NAME): Define.
* simops.c: Move "cmov", "cmov imm" to v850.igen, fix.
Wed Sep 17 16:21:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c: Move "mov", "reti", to v850.igen, fix tracing.
* interp.c (hash): Delete.
* v850.igen (nop): Really do nothing.
* interp.c (do_interrupt): Mask interrupts after PSW is saved, not
before.
* v850.igen (reti): Return to current PC not previous.
Wed Sep 17 14:02:10 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c: Move "ctret", "bsw", "hsw" to v850.igen, fix tracing.
(trace_module): Global, save component/module name across insn.
* simops.c: Move "bsh" to v850.igen, fix.
* v850.igen (callt): Load correct number of bytes. Fix tracing.
(stsr, ldsr): Correct src, dest fields. Fix tracing.
(ctret): Force alignment. Fix tracing.
Tue Sep 16 22:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (trace_output): Add result argument.
(trace_result): New function. Simpler version of trace_output,
assumes trace needed.
(trace_output): Call trace_result.
(trace_output): For IMM_REG_REG, trace correct register.
(trace_input): Add case for 16bit immediates.
(OP_600, OP_640, OP_680, OP_6C0, OP_6A0): Use.
* sim-main.h (TRACE_ALU_INPUT, TRACE_ALU_RESULT): Define.
(trace_values, trace_name, trace_pc, trace_num_values): Make
global.
(GR, SR): Define.
v850.insn (movea, stsr): Use.
(sxb, sxh, zxb, zxh): Ditto.
Tue Sep 16 21:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c: Move "movea" from here.
* v850.igen: To here.
* v850.igen (simm16): Define, sign extend imm16.
(uimm16): Define, no sign extension.
(addi, andi, movea, movhi, mulhi, ori, satsubi, xori): Use.
* simops.c: Move "sxh", "switch", "sxb", "callt", "dispose",
"mov32" from here.
* v850.igen: To here.
(switch): Fix off by two error in NIA calc.
Tue Sep 16 15:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (trace_pc, trace_name, trace_values, trace_num_values):
New static globals.
(trace_input): Just save pc, name and values for trace_output.
(trace_output): Write trace values to a buffer. Use
trace_one_insn to print trace info and buffer.
(SIZE_OPERANDS, SIZE_LOCATION): Delete.
Tue Sep 16 09:02:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (struct _sim_cpu): Add psw_mask so that reserved bits
can be masked out.
* simops.c (OP_2007E0, OP_4007E0): Move "ldsr", "stsr"
instructions from here.
* v850.igen (ldsr, stsr): To here. Mask out reserved bits when
setting PSW.
* interp.c (sim_open): Set psw_mask if machine known.
Tue Sep 16 10:20:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
* v850-dc: Add rule to diferentiate between breakpoint and divh.
* v850.igen (break): New instruction, breakpoint simulator.
* v850.igen (breakpoint): Enable. Change to a 32bit instruction.
Mon Sep 15 18:44:05 1997 Jim Wilson <wilson@cygnus.com>
* simops.c (Multiply64): Don't store into register zero.
Tue Sep 16 09:02:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (semantics.o): Add dependency.
* sim-main.h (SAVE_1, SAVE_2): Perform backward compatible save,
do not adjust CIA/NIA.
Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (OP_300, OP_400, OP_70): Make behavour depend on PSW[US].
* simops.c: Move "divun", "sld.bu", "divhn", "divhun", "divn",
"divun", "pushml" code from here to v850.igen.
(divun): Make global.
(type3_regs): Make global
* v850.igen: Move simops.c code to here.
* interp.c (sim_create_inferior): For v850eq set US bit by
default.
* interp.c (sim_open): Don't set arch, now set by
sim_analyze_program.
* configure: Regenerated to track ../common/aclocal.m4 changes.
Mon Sep 15 14:39:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (op_types): Move from here.
sim-main.h: To here.
* sim-main.h (trace_input, trace_output), simops.c: Make global.
* simops.c (OP_60): Move "jmp" code from here.
* v850.igen (jmp): To here.
* simops.c (OP_60): Move "sld.bu" code from here.
* v850.igen (sld.bu): To here.
Fri Sep 12 15:11:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
* v850.igen (prepare, ...): Add to v850eq architecture.
* interp.c (sim_open): Default to v850eq.
* interp.c (sim_open): Default to v850e.
* sim-main.h (signal.h): Include.
* v850.igen (illegal): Report/halt illegal instructions.
* Makefile.in (SIM_EXTRA_CFLAGS): Add SIM_RESERVED_BITS.
* configure.in: Add reserved bits option.
* configure: Regenerate.
Thu Sep 11 08:40:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_open): Use sim_do_commandf instead of asprintf.
* sim-main.h (INSN_NAME):
* Makefile.in (INCLUDE): Add SIM_EXTRA_DEPS.
(SIM_EXTRA_DEPS): Add itable.h
(tmp-gencode): Does not depend on simops.h
* sim-main.h (itable.h): Include.
(MAX_INSNS, INSN_NAME): Define.
* interp.c: Compute inttype from the interrupt_names index that
was passed in.
Wed Sep 10 10:25:40 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (trace_input): Use trace_printf instead of
sim_io_printf.
(trace_output): Ditto.
(trace_input): Only trace when TRACE_ALU_P. Delete code
disasembling instruction.
(trace_output): Only trace when TRACE_ALU_P.
Tue Sep 9 01:29:50 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (trace_input, trace_output): Use sim_io_printf.
(OP_620): Pass correct argument to trace.
(OP_E607E0): Ditto.
(trace_input): Obtain prog_bfd, text_start et.al from simulator
struct.
Mon Sep 8 21:03:52 1997 Andrew Cagney <cagney@b1.cygnus.com>
* v850.igen: New file.
* v850-dc: New file.
Mon Sep 8 18:33:04 1997 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h (SEXT16): Delete, use EXTEND16.
(SEXT8): Delete, use EXTEND8.
(SEXT32): Delete, used?
(SEXT40, SEXT44, SEXT64): Use UNSIGNED64 for constants, not ...LL.
(WITH_TARGET_WORD_MSB): Define as 31. v850 little bit endian.
* simops.c: Use EXTEND15 from sim-bits instead of SEXT16.
* sim-main.h (DEBUG_TRACE, DEBUG_VALUES, v850_debug): Delete,
replace with TRACE_INSN_P and TRACE_ALU_P.
* simops.c (trace_input, trace_output): Update.
* interp.c (sim_engine_run): Delete.
(lookup_hash): Delete.
(sim_open): Do not fill hash table.
(sim_trace): Delete.
Fri Sep 5 17:04:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (OP_FFFF): Use sim_engine_halt.
(OP_12007E0): Ditto.
(OP_10007E0): Ditto.
* sim-main.h (struct sim_cpu): Delete member exception. Using
sim-engine et.al.
* interp.c (sim_info): Do not do anything in sim-info.
(sim_stop): Delete, replace with sim-stop.
(sim_stop_reason): Delete, replace with sim-reason.
* sim-main.h (WITH_WATCHPOINTS): Define.
(WITH_MODULO_MEMORY): Define
* Makefile.in (SIM_OBJS): Add sim-resume, sim-watch, sim-stop,
sim-reason.
* interp.c (enum interrupt_cond_type): Delete.
(struct interrupt_generator): Delete.
(enum interrupt_type): Drop int_none.
(sim_open): Initialize WATCHPOINT module.
(sim_resume, sim_run): Rename sim_resume to sim_run.
(sim_engine_run): Replace interrupt code with call to sim-events.
(sim_set_interrupt): Delete.
(sim_parse_number): Delete.
Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Thu Sep 4 18:11:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (fetch_argv): New function, fetch a arg vector from
simulator memory.
* configure.in: Check for fork, execve, execv.
* configure: Regenerate.
* interp.c (sim_store_register, sim_fetch_register): Use H2T_4 and
T2H_4 for byte swapping.
* sim-main.h, interp.c (get_word, get_half, get_byte, put_word,
put_half, put_byte): Delete.
* Makefile.in (SIM_OBJS): Add sim-memopt.o module.
* sim-main.h (load_mem, store_mem): Redefine as macros.
(IMEM, IMEM_IMMED): New macros - fetch instructions.
* simops.c (OP_10007E0): For SYS_read, SYS_write, SYS_open
transfer data via a buffer.
(fetch_str): New function, fetch string from memory.
* Makefile.in (SIM_OBJS): Add sim-hrw.o module.
* interp.c (sim_open): Establish memory maps using sim-memopt.c
via sim_do_command.
(sim_do_command): Print error if memory-map command is used. Call
sim_args_command.
(map): Delete, replaced by sim-core.
(sim_memory_init): Delete, replaced by sim-core.
(sim_set_memory_map): Delete, replaced by sim-memopt.
(load_mem): Delete, replaced by sim-core.
(store_mem): Delete, replaced by sim-core.
(sim_write): Delete, replaced by sim-hrw.
(sim_read): Delete, replaced by sim-hrw.
* sim-main.h (struct sim_state): Remove memory members, using
sim-core.c
Wed Sep 3 10:18:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
* sim-main.h: Replace SIM_HAVE_FLATMEM with mem ptr.
* interp.c (map): Do not add to a void pointer.
* Makefile.in (INCLUDE): Add sim-main.h
* configure.in: Check for time.h
* configure: Re-generate.
* interp.c (struct interrupt_generator): Make time unsigned long,
address SIM_ADDR.
(sim_resume): Make oldpc SIM_ADDR.
(struct hash_entry): Make mask/opcode unsigned.
* v850_sim.h (struct simops ): Make opcode and mask unsigned.
* simops.c (utime.h): Include if available.
(OP_10007E0): Check for UTIME function.
(divun): Put parentheses around shift argument.
(OP_640): Put parentheses around shift argument, was wrong.
(OP_107F0): Return something.
* interp.c (sim_parse_number): Use strtoul not strtol.
(sim_resume): Use sim_elapsed_time_get to keep track of the time.
* configure.in (SIM_AC_OPTION_WARNINGS): Add.
(SIM_AC_OPTION_ENDIAN): Set to hardwired big.
(SIM_AC_OPTION_HOST_ENDIAN): Add.
(AC_CHECK_FUNCS): Add utime.
(AC_CHECK_HEADERS): Add stdlib.h, string.h, strings.h, utime.h
configure: Regenerate.
* Makefile.in (SIM_RUN_OBJS): Use nrun.o.
(SIM_OBJS): Add sim-io.o, sim-hload.o, sim-utils.o, sim-options.o,
sim-config.o, sim-module.o, sim-events.o, sim-core.o,
sim-endian.o, sim-engine.o, sim-trace.o, sim-profile.o
(SIM_ENDIAN, SIM_WARNGINS): Define.
* simops.c (OP_10007E0): Use sim_io_* for transfers.
* interp.c (sim_resume): Pass sd around.
* simops.c (sim-main.h): Include.
* gencode.c (write_template): Generate #include sim-main.h.
(write_opcodes): Ditto.
* interp.c (prog_bfd, prog_bfd_was_opened_p): Delete.
(v850_callback): Ditto.
(sim_kind, myname): Ditto.
(lookup_hash): Pass SD. Use sim_io_error.
(sim_set_memory_map): Pass in SD, use.
(init_system): Pass in SD, use.
(sim_open): Update.
(sim_set_profile): Delete.
(sim_set_profile_size): Delete.
(do_interrupt): Pass in SD, use.
(sim_info): Use sim_io_printf.
(sim_create_inferior): Reset registers. Set PC from prog_bfd
argument.
(sim_load): Delete, use common/sim-hload.c
(sim_size): Rename to sim_memory_init.
(sim_write): Remove call to init_system.
(init_system): Delete.
(sim_set_callbacks): Delete.
(sim_set_interrupt): Pass in SD, use.
(start_time): Delete.
* v850_sim.h: Remove everything except `struct simops' from here.
* sim-main.h: Move most to here.
* gencode.c: Move #includes to here.
* sim-main.h(struct _sim_cpu): Rename struct _state.
(#define PC, et.al.): Update
(v850_callback): Delete. Replaced with SIM_DESC arg.
(int8, uint8, int16, uint16, int32, uint32): Define types using
unsigned8 et.al from common/sim-types.h.
* sim-main.h (State): Define as STATE_CPU.
Mon Sep 1 12:07:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in: Check for time, chmod.
* configure: Regenerate.
* simops.c (SYS_time, SYS_chmod): Use HAVE_TIME, HAVE_CHMOD.
* simops.c (../../libgloss/v850/sys/syscall.h): Include instead of
sys/syscall.h.
(OP_10007E0): Check the existance each SYS_* macro independantly.
* v850_sim.h (SIGQUIT, SIGTRAP): Only define if missing.
Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Tue Aug 26 10:42:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_kill): Delete.
(sim_create_inferior): Add ABFD argument.
(sim_load): Move setting of PC from here.
(sim_create_inferior): To here.
Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Mon Aug 25 11:31:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_open): Add ABFD argument.
Fri Aug 22 10:39:28 1997 Nick Clifton <nickc@cygnus.com>
* simops.c (bsh): Only set CY flag if either of the bottom
bytes is zero.
* simops.c (prepare, dispose): Lower numbered
registers go to higher numbered address.
* simops.c (unsigned divide instructions): S bit set if result has
top bit set.
* simops.c (pushml, pushmh, popml, popmh): Lower numbered
registers go to higher numbered address.
Wed Aug 20 13:56:35 1997 Nick Clifton <nickc@cygnus.com>
* simops.c (OP_107E0, OP_107F0, OP_307E0, OP_307F0): Use correct
interpretation of SR bit in list18 structure.
(divn, divun): New functions to perform N step divide functions.
Mon Aug 18 10:59:02 1997 Nick Clifton <nickc@cygnus.com>
* simops.c (OP_300, OP_400, OP_60, OP_70): Support variant opcodes
with US bit set in the PSW.
Wed Aug 13 19:06:55 1997 Nick Clifton <nickc@cygnus.com>
* interp.c (sim_resume): Opcode functions return amount to be
added to PC and all opcodes take a standard format in the OP[]
array.
(do_format_*): Functions removed.
* v850_sim.h (SP, EP): New register mnemonics.
* gencode.c (write_header): Functions prototypes return an
integer.
* simops.c: Opcode functions return amount to be added to PC.
* v850_sim.h (CTPC, CTPSW, CTBP): New register mnemonics.
* simops.c: Add support for v850e instructions.
* simops.c: Add support for v850eq instructions.
Tue May 20 10:24:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_open): Add callback argument.
(sim_set_callbacks): Delete SIM_DESC argument.
Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Apr 23 17:20:16 1997 Doug Evans <dje@canuck.cygnus.com>
* interp.c (prog_bfd_was_opened_p): New static local.
(prog_bfd): New global variable.
(sim_open): Undo patch to add -E support.
(sim_close): Close prog_bfd if sim_load opened it.
(sim_load): Record bfd of loaded file in prog_bfd.
* simops.c (prog_bfd): Renamed from exec_bfd.
Fri Apr 18 14:17:12 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_stop): Stub function.
Thu Apr 17 03:53:18 1997 Doug Evans <dje@canuck.cygnus.com>
* Makefile.in (SIM_OBJS): Add sim-load.o.
* interp.c (sim_kind, myname): New static locals.
(sim_open): Set sim_kind, myname. Ignore -E arg.
(sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
load file into simulator. Set start address from bfd.
(sim_create_inferior): Return SIM_RC. Delete arg start_address.
Wed Apr 16 19:53:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (OP_10007E0): Only provide system calls SYS_execv,
SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
* interp.c (sim_open): New arg `kind'.
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
* configure: Re-generate.
Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
* configure: Regenerate to track ../common/aclocal.m4 changes.
Thu Mar 13 13:00:54 1997 Doug Evans <dje@canuck.cygnus.com>
* interp.c (sim_open): New SIM_DESC result. Argument is now
in argv form.
(other sim_*): New SIM_DESC argument.
Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
* Makefile.in (@COMMON_MAKEFILE_FRAG): Use
COMMON_{PRE,POST}_CONFIG_FRAG instead.
* configure.in: sinclude ../common/aclocal.m4.
* configure: Regenerated.
Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
* configure configure.in Makefile.in: Update to new configure
scheme which is more compatible with WinGDB builds.
* configure.in: Improve comment on how to run autoconf.
* configure: Re-run autoconf to get new ../common/aclocal.m4.
* Makefile.in: Use autoconf substitution to install common
makefile fragment.
Mon Jan 20 16:05:34 1997 Michael Meissner <meissner@tiktok.cygnus.com>
* simops.c (OP_{E0,2E0,6E0}): The multiply operations sign extend,
not zero extend.
Tue Jan 14 17:06:03 1997 Stu Grossman (grossman@critters.cygnus.com)
* simops.c: Put ifdefs around things to make MSVC happy. Get rid
of unistd.h. Disable SYS_stat, SYS_chown, SYS_time, SYS_times,
SYS_gettimeofday and SYS_utime from MSVC.
Tue Dec 31 18:11:13 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* simops.c (OP_10007E0): Know that kill encodes the signal number
via: 0xdead0000 | signal and turn it back into a signal.
Fri Dec 27 14:44:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* v850_sim.h (SIG_V850_EXIT): Define as -1.
* interp.c (sim_open): Cast calloc function.
(sim_stop_reason): If signal is SIG_V850_EXIT, inform gdb the
program exited with the appropriate exit code.
(sim_set_interrupt): Declare buildargv.
* simops.c (OP_10007E0): Make exit signal normal exit. Make time
type correct and work on big endian systems.
Wed Nov 20 02:18:44 1996 Doug Evans <dje@canuck.cygnus.com>
* Makefile.in: Delete stuff moved to ../common/Make-common.in.
(SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
* configure.in: Simplify using macros in ../common/aclocal.m4.
Call AC_CHECK_HEADERS(unistd.h).
* configure: Regenerated.
* config.in: New file.
* simops.c: #include "config.h". #include <unistd.h> if present.
Sun Nov 3 23:02:54 1996 Stan Shebs <shebs@andros.cygnus.com>
* v850_sim.h (State): New slots dummy_mem, pending_nmi.
(EIPC, etc): New macros for system registers.
* simops.c, interp.c: Use everywhere.
* interp.c: Add support for interrupts issued by interrupt
generators, either PC- or time-based. Controlled by simulator
command "sim interrupt".
* interp.c: Add support for variable-size allocation of memory,
via simulator command "sim memory-map".
(map): Issue SIGSEGV for references to invalid memory regions.
Thu Oct 31 14:44:10 1996 Gavin Koch <gavin@cygnus.com>
* simops.c: Include <sys/time.h> for struct timeval and
struct timezone.
Wed Oct 30 08:49:10 1996 Jeffrey A Law (law@cygnus.com)
* simops.c (OP_10007E0): Handle SYS_times and SYS_gettimeofday.
* simops.c (OP_10007E0): Handle SYS_time.
Tue Oct 29 14:22:55 1996 Jeffrey A Law (law@cygnus.com)
* simops.c: Include <sys/stat.h>.
(OP_10007E0): Handle SYS_stat.
Thu Oct 24 12:26:35 1996 Jeffrey A Law (law@cygnus.com)
* simops.c (OP_10007E0): Don't declare errno.
* simops.c (OP_500): Mask off low bit in displacement
for sld.w.
(OP_501): Similarly.
* simops.c (OP_500): Fix displacement handling for sld.w.
(OP_501): Similarly for sst.w.
* simops.c (trace_input): Remove all references to SEXT7.
(OP_300, OP_400, OP_500, OP_380, OP_480, OP_501): Displacement
is zero extended for sst/sld instructions.
* v850_sim.h (SEX7): Delete. It's no longer needed (and it
was incorrect anyway).
Thu Oct 24 10:33:33 1996 Stu Grossman (grossman@critters.cygnus.com)
* Makefile.in: Get rid of srcroot. Set all INSTALL macros via
autoconf.
* gencode.c (write_opcodes): Pad operands field to account for
MSVC braindamage.
* simops.c: Include errno.h. Exclude SYS_chown, since MSVC
doesn't support it. (Why is this here in the first place?!?)
* v850_sim.h: Get rid of 64 bit defs. Also, get rid of #elif's.
Change number of operands in struct simops from 9 to 6. Define
SIGTRAP and SIGQUIT for MSVC.
Tue Oct 15 16:19:51 1996 Stu Grossman (grossman@critters.cygnus.com)
* interp.c (MEM_SIZE): It's now bytes, not a power of 2.
* (map): Add support for external mem in the 1->2 meg range.
Also, abort() when memory access is way out of bounds. (Better to
die than to give wrong result. (This will be fixed later.))
* (sim_size): MEM_SIZE is now bytes, not shift factor.
Tue Oct 1 15:53:24 1996 Gavin Koch <gavin@cygnus.com>
* simops.c (trace_input): Swapped order of operands for output
output of OP_IMM_REG. Changed the fetching of the operands for
OP_LOAD32, and OP_STORE32 to work like op-function.
Mon Sep 30 15:46:33 1996 Stu Grossman (grossman@critters.cygnus.com)
* interp.c: Move includes of remote-sim.h and callback.h to
v850-sim.h.
* (lookup_hash): Add PC to report of hash failure.
* (map load_mem store_mem): New memory subsystem. Models V851
memory system.
* (sim_write sim_read): Use new memory subsystem.
* (sim_resume): Don't load and save PC into EIPC anymore. Needed
to make user-defined traps work right.
* simops.c (OP_*): Use new memory subsystem.
* (OP_14007E0 (reti)): Implement reti.
* (OP_14996E0 (trap)): Implement user-defined traps. Move I/O to
trap 31. Use new memory subsystem.
* v850_sim.h: Prototypes for load_mem, store_mem and map. Use
load_mem in RLW macro.
Fri Sep 27 18:34:09 1996 Stu Grossman (grossman@critters.cygnus.com)
* gencode.c (write_opcodes): Output hex values for opcode mask
and patterns.
* interp.c (sim_resume): Save and restore PC from the appropriate
register.
* (sim_fetch_register sim_store_register): Fix byte-order problem
with reading and writing registers.
* simops.c (OP_FFFF): Implement pseudo-breakpoint insn.
Fri Sep 27 17:42:37 1996 Jeffrey A Law (law@cygnus.com)
* simops.c (trace_input): Fix thinko.
Wed Sep 18 09:54:12 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* simops.c (exec_bfd): Rename from sim_bfd.
(trace_input): Ditto.
Thu Sep 12 12:03:05 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* simops.c (trace_input): Use find_nearest_line to print line
number, function name or file name of PC.
Wed Sep 11 16:44:37 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* simops.c: Add tracing support. Use SEXTxx macros instead of
doing hardwired shifts.
* configure.in (--enable-sim-cflags): Add switch to add additional
flags to simulator buld. If --enable-sim-cflags=trace, turn on
tracing.
* configure: Regenerate.
* Makefile.in: Don't require a VPATH capable make if configuring
in the same directory. Don't use CFLAGS for configuration flags.
Add flags from --enable-sim-cflags. Support canadian cross
builds. Rebuild whole simulator if include files change.
* interp.c (v850_debug): New global for debugging.
(lookup_hash,sim_size,sim_set_profile): Use
printf_filtered callback, instead of calling printf directly.
(sim_{open,trace}): Enable tracing if -t and compiled for tracing.
* v850_sim.h: Use limits.h to set the various sized types.
(SEXT{5,7,16,22}): New macros.
Mon Sep 9 20:50:46 1996 Jeffrey A Law (law@cygnus.com)
* interp.c (hash): Make this an inline function
when compiling with GCC. Simplify.
* simpos.c: Explicitly include "sys/syscall.h". Remove
some #if 0'd code. Enable more emulated syscalls.
Wed Sep 4 01:48:55 1996 Jeffrey A Law (law@cygnus.com)
* interp.c: Fix sign bit handling for add and sub instructions.
Tue Sep 3 10:20:30 1996 Jeffrey A Law (law@cygnus.com)
* gencode.c: Fix various indention & style problems.
Remove test code. Remove #if 0 code.
* interp.c: Provide prototypes for all static functions.
Fix minor indention problems.
(sim_open, sim_resume): Remove unused variables.
(sim_read): Return type is "int".
* simops.c: Remove unused variables.
(divh): Make result of divide-by-zero zero.
(setf): Initialize result to keep compiler quiet.
(sar instructions): These just clear the overflow bit.
* v850_sim.h: Provide prototypes for put_byte, put_half
and put_word.
* interp.c: OP should be an array of 32bit operands!
(v850_callback): Declare.
(do_format_5): Fix extraction of OP[0].
(sim_size): Remove debugging printf.
(sim_set_callbacks): Do something useful.
(sim_stop_reason): Gross hacks to get c-torture running.
* simops.c: Simplify code for computing targets of bCC
insns. Invert 's' bit if 'ov' bit is set for some
instructions. Fix 'cy' bit handling for numerous
instructions. Make the simulator stop when a halt
instruction is encountered. Very crude support for
emulated syscalls (trap 0).
* v850_sim.h: Include "callback.h" and declare
v850_callback. Items in the operand array are 32bits.
Sun Sep 1 22:35:35 1996 Jeffrey A Law (law@cygnus.com)
* interp.c (sim_resume): Fix code to check for a format 3
opcode.
* simops.c: bCC insns only argument is a constant, not a
register value (duh...)
Fri Aug 30 10:33:49 1996 Jeffrey A Law (law@cygnus.com)
* simops.c: Fix "not1" and "set1".
* simops.c: Don't forget to initialize temp for
"ld.h" and "ld.w"
* interp.c: Remove various debugging printfs.
* simops.c: Fix satadd, satsub boundary case handling.
* interp.c (hash): Fix.
* interp.c (do_format_8): Get operands correctly and
call the target function.
* simops.c: Rough cut at "clr1", "not1", "set1", and "tst1".
Thu Aug 29 13:53:29 1996 Jeffrey A Law (law@cygnus.com)
* interp.c (do_format_4): Get operands correctly and
call the target function.
* simops.c: Rough cut at "sld.b", "sld.h", "sld.w", "sst.b",
"sst.h", and "sst.w".
* v850_sim.h: The V850 doesn't have split I&D spaces. Change
accordingly. Remove many unused definitions.
* interp.c: The V850 doesn't have split I&D spaces. Change
accordingly.
(get_longlong, get_longword, get_word): Deleted.
(write_longlong, write_longword, write_word): Deleted.
(get_operands): Deleted.
(get_byte, get_half, get_word): New functions.
(put_byte, put_half, put_word): New functions.
* simops.c: Remove unused functions. Rough cut at
"ld.b", "ld.h", "ld.w", "st.b", "st.h", "st.w" insns.
* v850_sim.h (struct _state): Remove "psw" field. Add
"sregs" field.
(PSW): Remove bogus definition.
* simops.c: Change condition code handling to use the psw
register within the sregs array. Handle "ldsr" and "stsr".
* simops.c: Handle "satadd", "satsub", "satsubi", "satsubr".
* interp.c (do_format_5): Get operands correctly and
call the target function.
(sim_resume): Don't do a PC update for format 5 instructions.
* simops.c: Handle "jarl" and "jmp" instructions.
* simops.c: Fix minor typos. Handle "cmp", "setf", "tst"
"di", and "ei" instructions correctly.
* interp.c (do_format_3): Get operands correctly and call
the target function.
* simops.c: Handle bCC instructions.
* simops.c: Add condition code handling to shift insns.
Fix minor typos in condition code handling for other insns.
* Makefile.in: Fix typo.
* simops.c: Add condition code handling to "sub" "subr" and
"divh" instructions.
* interp.c (hash): Update to be more accurate.
(lookup_hash): Call hash rather than computing the hash
code here.
(do_format_1_2): Handle format 1 and format 2 instructions.
Get operands correctly and call the target function.
(do_format_6): Get operands correctly and call the target
function.
(do_formats_9_10): Rough cut so shift ops will work.
(sim_resume): Tweak to deal with format 1 and format 2
handling in a single funtion. Don't update the PC
for format 3 insns. Fix typos.
* simops.c: Slightly reorganize. Add condition code handling
to "add", "addi", "and", "andi", "or", "ori", "xor", "xori"
and "not" instructions.
* v850_sim.h (reg_t): Registers are 32bits.
(_state): The V850 has 32 general registers. Add a 32bit
psw and pc register too. Add accessor macros
* Makefile.in, interp.c, v850_sim.h: Bring over endianness
changes from the d10v simulator.
* simops.c: Add shift support.
* simops.c: Add multiply & divide support. Abort for system
instructions.
* simops.c: Add logicals, mov, movhi, movea, add, addi, sub
and subr. No condition codes yet.
Wed Aug 28 13:53:22 1996 Jeffrey A Law (law@cygnus.com)
* ChangeLog, Makefile.in, configure, configure.in, v850_sim.h,
gencode.c, interp.c, simops.c: Created.