Go to file
Tim Wiederhake c0272db585 btrace: Resume recording after disconnect.
This patch allows gdbserver to continue recording after disconnect.  On
reconnect, the recorded data is accessible to gdb as if no disconnect happened.

A possible application for this feature is remotely examine bugs that occur
at irregular intervals, where maintaining a gdb connection is inconvenient.

This also fixes the issue mentioned here:
https://sourceware.org/ml/gdb-patches/2015-11/msg00424.html

Signed-off-by: Tim Wiederhake <tim.wiederhake@intel.com>

gdb/ChangeLog:
	* NEWS: Resume btrace on reconnect.
	* record-btrace.c: Added record-btrace.h include.
	(record_btrace_open): Split into this and ...
	(record_btrace_push_target): ... this.
	(record_btrace_disconnect): New function.
	(init_record_btrace_ops): Use record_btrace_disconnect.
	* record-btrace.h: New file.
	* remote.c: Added record-btrace.h include.
	(remote_start_remote): Check recording status.
	(remote_btrace_maybe_reopen): New function.

gdb/doc/ChangeLog:
	* gdb.texinfo: Resume btrace on reconnect.

gdb/testsuite/ChangeLog:

	* gdb.btrace/reconnect.c: New file.
	* gdb.btrace/reconnect.exp: New file.

Change-Id: I95e8b0ab8a89e58591aba0e63818cee82fd211bc
2016-07-25 11:03:43 +02:00
bfd Automatic date update in version.in 2016-07-25 00:00:19 +00:00
binutils Set BFD_VERSION to 2.27.51 2016-07-21 15:22:13 -07:00
config Sync top level files with gcc. 2016-02-10 10:54:29 +00:00
cpu Correct fr30 comment 2016-03-03 12:55:30 +10:30
elfcpp Add support for MIPS .rld_map section. 2016-06-20 12:16:26 -07:00
etc Fix compile time warning messages building with gcc v6.1.1 2016-06-13 10:49:26 +01:00
gas Set BFD_VERSION to 2.27.51 2016-07-21 15:22:13 -07:00
gdb btrace: Resume recording after disconnect. 2016-07-25 11:03:43 +02:00
gold Fix gold testsuite failure with GCC 6. 2016-06-29 23:24:35 -07:00
gprof Set BFD_VERSION to 2.27.51 2016-07-21 15:22:13 -07:00
include Add support to the ARC disassembler for selecting instruction classes. 2016-07-20 17:08:07 +01:00
intl Regen intl/configure 2015-08-31 12:53:36 +09:30
ld Revise targets able to run ELF 64k section test 2016-07-25 15:33:11 +09:30
libdecnumber Remove leading/trailing white spaces in ChangeLog 2015-07-24 04:16:47 -07:00
libiberty Don't needlessly clear xmemdup allocated memory. 2016-05-31 20:34:47 +09:30
opcodes Set BFD_VERSION to 2.27.51 2016-07-21 15:22:13 -07:00
readline Revert "Sync readline/ to version 7.0 alpha" 2015-07-25 15:57:00 -04:00
sim Fix typo fsqrt -> sqrtf. 2016-07-21 09:23:16 +01:00
texinfo * texinfo/texinfo.tex: Update to version 2009-03-28.05. 2009-04-21 12:36:46 +00:00
zlib Regenerate configure 2016-05-09 17:24:30 +09:30
.cvsignore add autom4te.cache to .cvsignore 2007-02-13 15:25:58 +00:00
.gitattributes Add a .gitattributes file for use with git-merge-changelog 2014-07-25 18:07:23 -04:00
.gitignore Import changes made to files shared with the FSF GCC project. 2016-01-11 11:06:56 +00:00
ChangeLog Enable the configuration of GDB for the NDS32 target. 2016-07-20 09:06:39 +01:00
compile Update from upstream Automake 2014-11-16 13:43:48 +01:00
config-ml.in Sync toplevel files with GCC 2015-07-27 07:49:05 -07:00
config.guess Fix typo introduced during the most recent synchronization update. 2016-05-27 14:34:06 +01:00
config.rpath Remove freebsd1 from libtool.m4 macros and config.rpath. 2011-02-13 21:00:14 +00:00
config.sub Sync config.guess and config.sub with FSF GCC mainline versions 2016-05-23 11:42:17 +01:00
configure Enable the configuration of GDB for the NDS32 target. 2016-07-20 09:06:39 +01:00
configure.ac Enable the configuration of GDB for the NDS32 target. 2016-07-20 09:06:39 +01:00
COPYING
COPYING3 * COPYING3: New file. Contains version 3 of the GNU General Public License. 2007-07-17 13:50:23 +00:00
COPYING3.LIB * COPYING3: New file. Contains version 3 of the GNU General Public License. 2007-07-17 13:50:23 +00:00
COPYING.LIB 2005-07-16 Kelley Cook <kcook@gcc.gnu.org> 2005-07-16 02:41:34 +00:00
COPYING.LIBGLOSS 2013-01-07 Jeff Johnston <jjohnstn@redhat.com> 2013-01-07 21:39:26 +00:00
COPYING.NEWLIB 2013-10-01 Jeff Johnston <jjohnstn@redhat.com> 2013-10-01 18:14:04 +00:00
depcomp Update from upstream Automake 2014-11-16 13:43:48 +01:00
djunpack.bat * djunpack.bat: Use ".." quoting in Sed command, for the sake of 2009-03-27 13:37:09 +00:00
install-sh Update from upstream Automake 2014-11-16 13:43:48 +01:00
libtool.m4 Sync top-level btool.m4 with GCC 2016-01-12 08:44:52 -08:00
lt~obsolete.m4 Sync Libtool from GCC. 2010-01-09 21:11:44 +00:00
ltgcc.m4 * libtool.m4: Update to libtool 2.2.6. 2008-09-29 15:28:14 +00:00
ltmain.sh PR target/59788 2014-02-06 11:01:57 +01:00
ltoptions.m4 Sync Libtool from GCC. 2010-01-09 21:11:44 +00:00
ltsugar.m4 * libtool.m4: Update to libtool 2.2.6. 2008-09-29 15:28:14 +00:00
ltversion.m4 Sync Libtool from GCC. 2010-01-09 21:11:44 +00:00
MAINTAINERS Update description of ownership of files in include/ 2014-11-04 16:14:14 -08:00
Makefile.def Sync top-level Makefile.def with GCC 2016-01-12 08:34:40 -08:00
Makefile.in Add dependencies to configure rule 2016-05-28 22:36:04 +09:30
Makefile.tpl Add dependencies to configure rule 2016-05-28 22:36:04 +09:30
makefile.vms
missing Update from upstream Automake 2014-11-16 13:43:48 +01:00
mkdep
mkinstalldirs Update from upstream Automake 2014-11-16 13:43:48 +01:00
move-if-change Update `move-if-change' from gnulib 2014-11-16 17:04:02 +01:00
README
README-maintainer-mode Cleanups after the update to Autoconf 2.64, Automake 1.11. 2009-08-22 17:08:11 +00:00
setup.com 2009-09-01 Tristan Gingold <gingold@adacore.com> 2009-09-01 13:38:26 +00:00
src-release.sh fix gdb version parsing in src-release.sh 2016-01-17 10:01:55 +04:00
symlink-tree
ylwrap Update from upstream Automake 2014-11-16 13:43:48 +01:00

		   README for GNU development tools

This directory contains various GNU compilers, assemblers, linkers, 
debuggers, etc., plus their support routines, definitions, and documentation.

If you are receiving this as part of a GDB release, see the file gdb/README.
If with a binutils release, see binutils/README;  if with a libg++ release,
see libg++/README, etc.  That'll give you info about this
package -- supported targets, how to use it, how to report bugs, etc.

It is now possible to automatically configure and build a variety of
tools with one command.  To build all of the tools contained herein,
run the ``configure'' script here, e.g.:

	./configure 
	make

To install them (by default in /usr/local/bin, /usr/local/lib, etc),
then do:
	make install

(If the configure script can't determine your type of computer, give it
the name as an argument, for instance ``./configure sun4''.  You can
use the script ``config.sub'' to test whether a name is recognized; if
it is, config.sub translates it to a triplet specifying CPU, vendor,
and OS.)

If you have more than one compiler on your system, it is often best to
explicitly set CC in the environment before running configure, and to
also set CC when running make.  For example (assuming sh/bash/ksh):

	CC=gcc ./configure
	make

A similar example using csh:

	setenv CC gcc
	./configure
	make

Much of the code and documentation enclosed is copyright by
the Free Software Foundation, Inc.  See the file COPYING or
COPYING.LIB in the various directories, for a description of the
GNU General Public License terms under which you can copy the files.

REPORTING BUGS: Again, see gdb/README, binutils/README, etc., for info
on where and how to report problems.