mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-21 08:13:37 +08:00
f9830ec165
This patch adds constraints for read and write only system registers with the msr and mrs instructions. The code will treat having both flags set and none set as the same. These flags add constraints that must be matched up. e.g. a system register with a READ only flag set, can only be used with mrs. If The constraint fails a warning is emitted. Examples of the warnings generated: test.s: Assembler messages: test.s:5: Warning: specified register cannot be written to at operand 1 -- `msr dbgdtrrx_el0,x3' test.s:7: Warning: specified register cannot be read from at operand 2 -- `mrs x3,dbgdtrtx_el0' test.s:8: Warning: specified register cannot be written to at operand 1 -- `msr midr_el1,x3' and disassembly notes: 0000000000000000 <main>: 0: d5130503 msr dbgdtrtx_el0, x3 4: d5130503 msr dbgdtrtx_el0, x3 8: d5330503 mrs x3, dbgdtrrx_el0 c: d5330503 mrs x3, dbgdtrrx_el0 10: d5180003 msr midr_el1, x3 ; note: writing to a read-only register. Note that because dbgdtrrx_el0 and dbgdtrtx_el0 have the same encoding, during disassembly the constraints are use to disambiguate between the two. An exact constraint match is always prefered over partial ones if available. As always the warnings can be suppressed with -w and also be made errors using warnings as errors. binutils/ PR binutils/21446 * doc/binutils.texi (-M): Document AArch64 options. gas/ PR binutils/21446 * testsuite/gas/aarch64/illegal-sysreg-2.s: Fix pmbidr_el1 test. * testsuite/gas/aarch64/illegal-sysreg-2.l: Likewise. * testsuite/gas/aarch64/illegal-sysreg-2.d: Likewise. * testsuite/gas/aarch64/sysreg-diagnostic.s: New. * testsuite/gas/aarch64/sysreg-diagnostic.l: New. * testsuite/gas/aarch64/sysreg-diagnostic.d: New. include/ PR binutils/21446 * opcode/aarch64.h (F_SYS_READ, F_SYS_WRITE): New. opcodes/ PR binutils/21446 * aarch64-asm.c (opintl.h): Include. (aarch64_ins_sysreg): Enforce read/write constraints. * aarch64-dis.c (aarch64_ext_sysreg): Likewise. * aarch64-opc.h (F_DEPRECATED, F_ARCHEXT, F_HASXT): Moved here. (F_REG_READ, F_REG_WRITE): New. * aarch64-opc.c (aarch64_print_operand): Generate notes for AARCH64_OPND_SYSREG. (F_DEPRECATED, F_ARCHEXT, F_HASXT): Move to aarch64-opc.h. (aarch64_sys_regs): Add constraints to currentel, midr_el1, ctr_el0, mpidr_el1, revidr_el1, aidr_el1, dczid_el0, id_dfr0_el1, id_pfr0_el1, id_pfr1_el1, id_afr0_el1, id_mmfr0_el1, id_mmfr1_el1, id_mmfr2_el1, id_mmfr3_el1, id_mmfr4_el1, id_isar0_el1, id_isar1_el1, id_isar2_el1, id_isar3_el1, id_isar4_el1, id_isar5_el1, mvfr0_el1, mvfr1_el1, mvfr2_el1, ccsidr_el1, id_aa64pfr0_el1, id_aa64pfr1_el1, id_aa64dfr0_el1, id_aa64dfr1_el1, id_aa64isar0_el1, id_aa64isar1_el1, id_aa64mmfr0_el1, id_aa64mmfr1_el1, id_aa64mmfr2_el1, id_aa64afr0_el1, id_aa64afr0_el1, id_aa64afr1_el1, id_aa64zfr0_el1, clidr_el1, csselr_el1, vsesr_el2, erridr_el1, erxfr_el1, rvbar_el1, rvbar_el2, rvbar_el3, isr_el1, tpidrro_el0, cntfrq_el0, cntpct_el0, cntvct_el0, mdccsr_el0, dbgdtrrx_el0, dbgdtrtx_el0, osdtrrx_el1, osdtrtx_el1, mdrar_el1, oslar_el1, oslsr_el1, dbgauthstatus_el1, pmbidr_el1, pmsidr_el1, pmswinc_el0, pmceid0_el0, pmceid1_el0. * aarch64-tbl.h (aarch64_opcode_table): Add constraints to msr (F_SYS_WRITE), mrs (F_SYS_READ).
2045 lines
63 KiB
C
2045 lines
63 KiB
C
/* aarch64-asm.c -- AArch64 assembler support.
|
|
Copyright (C) 2012-2018 Free Software Foundation, Inc.
|
|
Contributed by ARM Ltd.
|
|
|
|
This file is part of the GNU opcodes library.
|
|
|
|
This library is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3, or (at your option)
|
|
any later version.
|
|
|
|
It is distributed in the hope that it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
|
|
License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; see the file COPYING3. If not,
|
|
see <http://www.gnu.org/licenses/>. */
|
|
|
|
#include "sysdep.h"
|
|
#include <stdarg.h>
|
|
#include "libiberty.h"
|
|
#include "aarch64-asm.h"
|
|
#include "opintl.h"
|
|
|
|
/* Utilities. */
|
|
|
|
/* The unnamed arguments consist of the number of fields and information about
|
|
these fields where the VALUE will be inserted into CODE. MASK can be zero or
|
|
the base mask of the opcode.
|
|
|
|
N.B. the fields are required to be in such an order than the least signficant
|
|
field for VALUE comes the first, e.g. the <index> in
|
|
SQDMLAL <Va><d>, <Vb><n>, <Vm>.<Ts>[<index>]
|
|
is encoded in H:L:M in some cases, the fields H:L:M should be passed in
|
|
the order of M, L, H. */
|
|
|
|
static inline void
|
|
insert_fields (aarch64_insn *code, aarch64_insn value, aarch64_insn mask, ...)
|
|
{
|
|
uint32_t num;
|
|
const aarch64_field *field;
|
|
enum aarch64_field_kind kind;
|
|
va_list va;
|
|
|
|
va_start (va, mask);
|
|
num = va_arg (va, uint32_t);
|
|
assert (num <= 5);
|
|
while (num--)
|
|
{
|
|
kind = va_arg (va, enum aarch64_field_kind);
|
|
field = &fields[kind];
|
|
insert_field (kind, code, value, mask);
|
|
value >>= field->width;
|
|
}
|
|
va_end (va);
|
|
}
|
|
|
|
/* Insert a raw field value VALUE into all fields in SELF->fields.
|
|
The least significant bit goes in the final field. */
|
|
|
|
static void
|
|
insert_all_fields (const aarch64_operand *self, aarch64_insn *code,
|
|
aarch64_insn value)
|
|
{
|
|
unsigned int i;
|
|
enum aarch64_field_kind kind;
|
|
|
|
for (i = ARRAY_SIZE (self->fields); i-- > 0; )
|
|
if (self->fields[i] != FLD_NIL)
|
|
{
|
|
kind = self->fields[i];
|
|
insert_field (kind, code, value, 0);
|
|
value >>= fields[kind].width;
|
|
}
|
|
}
|
|
|
|
/* Operand inserters. */
|
|
|
|
/* Insert register number. */
|
|
bfd_boolean
|
|
aarch64_ins_regno (const aarch64_operand *self, const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
insert_field (self->fields[0], code, info->reg.regno, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Insert register number, index and/or other data for SIMD register element
|
|
operand, e.g. the last source operand in
|
|
SQDMLAL <Va><d>, <Vb><n>, <Vm>.<Ts>[<index>]. */
|
|
bfd_boolean
|
|
aarch64_ins_reglane (const aarch64_operand *self, const aarch64_opnd_info *info,
|
|
aarch64_insn *code, const aarch64_inst *inst,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
/* regno */
|
|
insert_field (self->fields[0], code, info->reglane.regno, inst->opcode->mask);
|
|
/* index and/or type */
|
|
if (inst->opcode->iclass == asisdone || inst->opcode->iclass == asimdins)
|
|
{
|
|
int pos = info->qualifier - AARCH64_OPND_QLF_S_B;
|
|
if (info->type == AARCH64_OPND_En
|
|
&& inst->opcode->operands[0] == AARCH64_OPND_Ed)
|
|
{
|
|
/* index2 for e.g. INS <Vd>.<Ts>[<index1>], <Vn>.<Ts>[<index2>]. */
|
|
assert (info->idx == 1); /* Vn */
|
|
aarch64_insn value = info->reglane.index << pos;
|
|
insert_field (FLD_imm4, code, value, 0);
|
|
}
|
|
else
|
|
{
|
|
/* index and type for e.g. DUP <V><d>, <Vn>.<T>[<index>].
|
|
imm5<3:0> <V>
|
|
0000 RESERVED
|
|
xxx1 B
|
|
xx10 H
|
|
x100 S
|
|
1000 D */
|
|
aarch64_insn value = ((info->reglane.index << 1) | 1) << pos;
|
|
insert_field (FLD_imm5, code, value, 0);
|
|
}
|
|
}
|
|
else if (inst->opcode->iclass == dotproduct)
|
|
{
|
|
unsigned reglane_index = info->reglane.index;
|
|
switch (info->qualifier)
|
|
{
|
|
case AARCH64_OPND_QLF_S_4B:
|
|
/* L:H */
|
|
assert (reglane_index < 4);
|
|
insert_fields (code, reglane_index, 0, 2, FLD_L, FLD_H);
|
|
break;
|
|
default:
|
|
assert (0);
|
|
}
|
|
}
|
|
else if (inst->opcode->iclass == cryptosm3)
|
|
{
|
|
/* index for e.g. SM3TT2A <Vd>.4S, <Vn>.4S, <Vm>S[<imm2>]. */
|
|
unsigned reglane_index = info->reglane.index;
|
|
assert (reglane_index < 4);
|
|
insert_field (FLD_SM3_imm2, code, reglane_index, 0);
|
|
}
|
|
else
|
|
{
|
|
/* index for e.g. SQDMLAL <Va><d>, <Vb><n>, <Vm>.<Ts>[<index>]
|
|
or SQDMLAL <Va><d>, <Vb><n>, <Vm>.<Ts>[<index>]. */
|
|
unsigned reglane_index = info->reglane.index;
|
|
|
|
if (inst->opcode->op == OP_FCMLA_ELEM)
|
|
/* Complex operand takes two elements. */
|
|
reglane_index *= 2;
|
|
|
|
switch (info->qualifier)
|
|
{
|
|
case AARCH64_OPND_QLF_S_H:
|
|
/* H:L:M */
|
|
assert (reglane_index < 8);
|
|
insert_fields (code, reglane_index, 0, 3, FLD_M, FLD_L, FLD_H);
|
|
break;
|
|
case AARCH64_OPND_QLF_S_S:
|
|
/* H:L */
|
|
assert (reglane_index < 4);
|
|
insert_fields (code, reglane_index, 0, 2, FLD_L, FLD_H);
|
|
break;
|
|
case AARCH64_OPND_QLF_S_D:
|
|
/* H */
|
|
assert (reglane_index < 2);
|
|
insert_field (FLD_H, code, reglane_index, 0);
|
|
break;
|
|
default:
|
|
assert (0);
|
|
}
|
|
}
|
|
return TRUE;
|
|
}
|
|
|
|
/* Insert regno and len field of a register list operand, e.g. Vn in TBL. */
|
|
bfd_boolean
|
|
aarch64_ins_reglist (const aarch64_operand *self, const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
/* R */
|
|
insert_field (self->fields[0], code, info->reglist.first_regno, 0);
|
|
/* len */
|
|
insert_field (FLD_len, code, info->reglist.num_regs - 1, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Insert Rt and opcode fields for a register list operand, e.g. Vt
|
|
in AdvSIMD load/store instructions. */
|
|
bfd_boolean
|
|
aarch64_ins_ldst_reglist (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
aarch64_insn value = 0;
|
|
/* Number of elements in each structure to be loaded/stored. */
|
|
unsigned num = get_opcode_dependent_value (inst->opcode);
|
|
|
|
/* Rt */
|
|
insert_field (FLD_Rt, code, info->reglist.first_regno, 0);
|
|
/* opcode */
|
|
switch (num)
|
|
{
|
|
case 1:
|
|
switch (info->reglist.num_regs)
|
|
{
|
|
case 1: value = 0x7; break;
|
|
case 2: value = 0xa; break;
|
|
case 3: value = 0x6; break;
|
|
case 4: value = 0x2; break;
|
|
default: assert (0);
|
|
}
|
|
break;
|
|
case 2:
|
|
value = info->reglist.num_regs == 4 ? 0x3 : 0x8;
|
|
break;
|
|
case 3:
|
|
value = 0x4;
|
|
break;
|
|
case 4:
|
|
value = 0x0;
|
|
break;
|
|
default:
|
|
assert (0);
|
|
}
|
|
insert_field (FLD_opcode, code, value, 0);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/* Insert Rt and S fields for a register list operand, e.g. Vt in AdvSIMD load
|
|
single structure to all lanes instructions. */
|
|
bfd_boolean
|
|
aarch64_ins_ldst_reglist_r (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
aarch64_insn value;
|
|
/* The opcode dependent area stores the number of elements in
|
|
each structure to be loaded/stored. */
|
|
int is_ld1r = get_opcode_dependent_value (inst->opcode) == 1;
|
|
|
|
/* Rt */
|
|
insert_field (FLD_Rt, code, info->reglist.first_regno, 0);
|
|
/* S */
|
|
value = (aarch64_insn) 0;
|
|
if (is_ld1r && info->reglist.num_regs == 2)
|
|
/* OP_LD1R does not have alternating variant, but have "two consecutive"
|
|
instead. */
|
|
value = (aarch64_insn) 1;
|
|
insert_field (FLD_S, code, value, 0);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/* Insert Q, opcode<2:1>, S, size and Rt fields for a register element list
|
|
operand e.g. Vt in AdvSIMD load/store single element instructions. */
|
|
bfd_boolean
|
|
aarch64_ins_ldst_elemlist (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
aarch64_field field = {0, 0};
|
|
aarch64_insn QSsize = 0; /* fields Q:S:size. */
|
|
aarch64_insn opcodeh2 = 0; /* opcode<2:1> */
|
|
|
|
assert (info->reglist.has_index);
|
|
|
|
/* Rt */
|
|
insert_field (FLD_Rt, code, info->reglist.first_regno, 0);
|
|
/* Encode the index, opcode<2:1> and size. */
|
|
switch (info->qualifier)
|
|
{
|
|
case AARCH64_OPND_QLF_S_B:
|
|
/* Index encoded in "Q:S:size". */
|
|
QSsize = info->reglist.index;
|
|
opcodeh2 = 0x0;
|
|
break;
|
|
case AARCH64_OPND_QLF_S_H:
|
|
/* Index encoded in "Q:S:size<1>". */
|
|
QSsize = info->reglist.index << 1;
|
|
opcodeh2 = 0x1;
|
|
break;
|
|
case AARCH64_OPND_QLF_S_S:
|
|
/* Index encoded in "Q:S". */
|
|
QSsize = info->reglist.index << 2;
|
|
opcodeh2 = 0x2;
|
|
break;
|
|
case AARCH64_OPND_QLF_S_D:
|
|
/* Index encoded in "Q". */
|
|
QSsize = info->reglist.index << 3 | 0x1;
|
|
opcodeh2 = 0x2;
|
|
break;
|
|
default:
|
|
assert (0);
|
|
}
|
|
insert_fields (code, QSsize, 0, 3, FLD_vldst_size, FLD_S, FLD_Q);
|
|
gen_sub_field (FLD_asisdlso_opcode, 1, 2, &field);
|
|
insert_field_2 (&field, code, opcodeh2, 0);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/* Insert fields immh:immb and/or Q for e.g. the shift immediate in
|
|
SSHR <Vd>.<T>, <Vn>.<T>, #<shift>
|
|
or SSHR <V><d>, <V><n>, #<shift>. */
|
|
bfd_boolean
|
|
aarch64_ins_advsimd_imm_shift (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info,
|
|
aarch64_insn *code, const aarch64_inst *inst,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
unsigned val = aarch64_get_qualifier_standard_value (info->qualifier);
|
|
aarch64_insn Q, imm;
|
|
|
|
if (inst->opcode->iclass == asimdshf)
|
|
{
|
|
/* Q
|
|
immh Q <T>
|
|
0000 x SEE AdvSIMD modified immediate
|
|
0001 0 8B
|
|
0001 1 16B
|
|
001x 0 4H
|
|
001x 1 8H
|
|
01xx 0 2S
|
|
01xx 1 4S
|
|
1xxx 0 RESERVED
|
|
1xxx 1 2D */
|
|
Q = (val & 0x1) ? 1 : 0;
|
|
insert_field (FLD_Q, code, Q, inst->opcode->mask);
|
|
val >>= 1;
|
|
}
|
|
|
|
assert (info->type == AARCH64_OPND_IMM_VLSR
|
|
|| info->type == AARCH64_OPND_IMM_VLSL);
|
|
|
|
if (info->type == AARCH64_OPND_IMM_VLSR)
|
|
/* immh:immb
|
|
immh <shift>
|
|
0000 SEE AdvSIMD modified immediate
|
|
0001 (16-UInt(immh:immb))
|
|
001x (32-UInt(immh:immb))
|
|
01xx (64-UInt(immh:immb))
|
|
1xxx (128-UInt(immh:immb)) */
|
|
imm = (16 << (unsigned)val) - info->imm.value;
|
|
else
|
|
/* immh:immb
|
|
immh <shift>
|
|
0000 SEE AdvSIMD modified immediate
|
|
0001 (UInt(immh:immb)-8)
|
|
001x (UInt(immh:immb)-16)
|
|
01xx (UInt(immh:immb)-32)
|
|
1xxx (UInt(immh:immb)-64) */
|
|
imm = info->imm.value + (8 << (unsigned)val);
|
|
insert_fields (code, imm, 0, 2, FLD_immb, FLD_immh);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/* Insert fields for e.g. the immediate operands in
|
|
BFM <Wd>, <Wn>, #<immr>, #<imms>. */
|
|
bfd_boolean
|
|
aarch64_ins_imm (const aarch64_operand *self, const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
int64_t imm;
|
|
|
|
imm = info->imm.value;
|
|
if (operand_need_shift_by_two (self))
|
|
imm >>= 2;
|
|
insert_all_fields (self, code, imm);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Insert immediate and its shift amount for e.g. the last operand in
|
|
MOVZ <Wd>, #<imm16>{, LSL #<shift>}. */
|
|
bfd_boolean
|
|
aarch64_ins_imm_half (const aarch64_operand *self, const aarch64_opnd_info *info,
|
|
aarch64_insn *code, const aarch64_inst *inst,
|
|
aarch64_operand_error *errors)
|
|
{
|
|
/* imm16 */
|
|
aarch64_ins_imm (self, info, code, inst, errors);
|
|
/* hw */
|
|
insert_field (FLD_hw, code, info->shifter.amount >> 4, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Insert cmode and "a:b:c:d:e:f:g:h" fields for e.g. the last operand in
|
|
MOVI <Vd>.<T>, #<imm8> {, LSL #<amount>}. */
|
|
bfd_boolean
|
|
aarch64_ins_advsimd_imm_modified (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors
|
|
ATTRIBUTE_UNUSED)
|
|
{
|
|
enum aarch64_opnd_qualifier opnd0_qualifier = inst->operands[0].qualifier;
|
|
uint64_t imm = info->imm.value;
|
|
enum aarch64_modifier_kind kind = info->shifter.kind;
|
|
int amount = info->shifter.amount;
|
|
aarch64_field field = {0, 0};
|
|
|
|
/* a:b:c:d:e:f:g:h */
|
|
if (!info->imm.is_fp && aarch64_get_qualifier_esize (opnd0_qualifier) == 8)
|
|
{
|
|
/* Either MOVI <Dd>, #<imm>
|
|
or MOVI <Vd>.2D, #<imm>.
|
|
<imm> is a 64-bit immediate
|
|
"aaaaaaaabbbbbbbbccccccccddddddddeeeeeeeeffffffffgggggggghhhhhhhh",
|
|
encoded in "a:b:c:d:e:f:g:h". */
|
|
imm = aarch64_shrink_expanded_imm8 (imm);
|
|
assert ((int)imm >= 0);
|
|
}
|
|
insert_fields (code, imm, 0, 2, FLD_defgh, FLD_abc);
|
|
|
|
if (kind == AARCH64_MOD_NONE)
|
|
return TRUE;
|
|
|
|
/* shift amount partially in cmode */
|
|
assert (kind == AARCH64_MOD_LSL || kind == AARCH64_MOD_MSL);
|
|
if (kind == AARCH64_MOD_LSL)
|
|
{
|
|
/* AARCH64_MOD_LSL: shift zeros. */
|
|
int esize = aarch64_get_qualifier_esize (opnd0_qualifier);
|
|
assert (esize == 4 || esize == 2 || esize == 1);
|
|
/* For 8-bit move immediate, the optional LSL #0 does not require
|
|
encoding. */
|
|
if (esize == 1)
|
|
return TRUE;
|
|
amount >>= 3;
|
|
if (esize == 4)
|
|
gen_sub_field (FLD_cmode, 1, 2, &field); /* per word */
|
|
else
|
|
gen_sub_field (FLD_cmode, 1, 1, &field); /* per halfword */
|
|
}
|
|
else
|
|
{
|
|
/* AARCH64_MOD_MSL: shift ones. */
|
|
amount >>= 4;
|
|
gen_sub_field (FLD_cmode, 0, 1, &field); /* per word */
|
|
}
|
|
insert_field_2 (&field, code, amount, 0);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/* Insert fields for an 8-bit floating-point immediate. */
|
|
bfd_boolean
|
|
aarch64_ins_fpimm (const aarch64_operand *self, const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
insert_all_fields (self, code, info->imm.value);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Insert 1-bit rotation immediate (#90 or #270). */
|
|
bfd_boolean
|
|
aarch64_ins_imm_rotate1 (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info,
|
|
aarch64_insn *code, const aarch64_inst *inst,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
uint64_t rot = (info->imm.value - 90) / 180;
|
|
assert (rot < 2U);
|
|
insert_field (self->fields[0], code, rot, inst->opcode->mask);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Insert 2-bit rotation immediate (#0, #90, #180 or #270). */
|
|
bfd_boolean
|
|
aarch64_ins_imm_rotate2 (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info,
|
|
aarch64_insn *code, const aarch64_inst *inst,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
uint64_t rot = info->imm.value / 90;
|
|
assert (rot < 4U);
|
|
insert_field (self->fields[0], code, rot, inst->opcode->mask);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Insert #<fbits> for the immediate operand in fp fix-point instructions,
|
|
e.g. SCVTF <Dd>, <Wn>, #<fbits>. */
|
|
bfd_boolean
|
|
aarch64_ins_fbits (const aarch64_operand *self, const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
insert_field (self->fields[0], code, 64 - info->imm.value, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Insert arithmetic immediate for e.g. the last operand in
|
|
SUBS <Wd>, <Wn|WSP>, #<imm> {, <shift>}. */
|
|
bfd_boolean
|
|
aarch64_ins_aimm (const aarch64_operand *self, const aarch64_opnd_info *info,
|
|
aarch64_insn *code, const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
/* shift */
|
|
aarch64_insn value = info->shifter.amount ? 1 : 0;
|
|
insert_field (self->fields[0], code, value, 0);
|
|
/* imm12 (unsigned) */
|
|
insert_field (self->fields[1], code, info->imm.value, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Common routine shared by aarch64_ins{,_inv}_limm. INVERT_P says whether
|
|
the operand should be inverted before encoding. */
|
|
static bfd_boolean
|
|
aarch64_ins_limm_1 (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst, bfd_boolean invert_p,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
aarch64_insn value;
|
|
uint64_t imm = info->imm.value;
|
|
int esize = aarch64_get_qualifier_esize (inst->operands[0].qualifier);
|
|
|
|
if (invert_p)
|
|
imm = ~imm;
|
|
/* The constraint check should have guaranteed this wouldn't happen. */
|
|
assert (aarch64_logical_immediate_p (imm, esize, &value));
|
|
|
|
insert_fields (code, value, 0, 3, self->fields[2], self->fields[1],
|
|
self->fields[0]);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Insert logical/bitmask immediate for e.g. the last operand in
|
|
ORR <Wd|WSP>, <Wn>, #<imm>. */
|
|
bfd_boolean
|
|
aarch64_ins_limm (const aarch64_operand *self, const aarch64_opnd_info *info,
|
|
aarch64_insn *code, const aarch64_inst *inst,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
return aarch64_ins_limm_1 (self, info, code, inst,
|
|
inst->opcode->op == OP_BIC, errors);
|
|
}
|
|
|
|
/* Insert a logical/bitmask immediate for the BIC alias of AND (etc.). */
|
|
bfd_boolean
|
|
aarch64_ins_inv_limm (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
return aarch64_ins_limm_1 (self, info, code, inst, TRUE, errors);
|
|
}
|
|
|
|
/* Encode Ft for e.g. STR <Qt>, [<Xn|SP>, <R><m>{, <extend> {<amount>}}]
|
|
or LDP <Qt1>, <Qt2>, [<Xn|SP>], #<imm>. */
|
|
bfd_boolean
|
|
aarch64_ins_ft (const aarch64_operand *self, const aarch64_opnd_info *info,
|
|
aarch64_insn *code, const aarch64_inst *inst,
|
|
aarch64_operand_error *errors)
|
|
{
|
|
aarch64_insn value = 0;
|
|
|
|
assert (info->idx == 0);
|
|
|
|
/* Rt */
|
|
aarch64_ins_regno (self, info, code, inst, errors);
|
|
if (inst->opcode->iclass == ldstpair_indexed
|
|
|| inst->opcode->iclass == ldstnapair_offs
|
|
|| inst->opcode->iclass == ldstpair_off
|
|
|| inst->opcode->iclass == loadlit)
|
|
{
|
|
/* size */
|
|
switch (info->qualifier)
|
|
{
|
|
case AARCH64_OPND_QLF_S_S: value = 0; break;
|
|
case AARCH64_OPND_QLF_S_D: value = 1; break;
|
|
case AARCH64_OPND_QLF_S_Q: value = 2; break;
|
|
default: assert (0);
|
|
}
|
|
insert_field (FLD_ldst_size, code, value, 0);
|
|
}
|
|
else
|
|
{
|
|
/* opc[1]:size */
|
|
value = aarch64_get_qualifier_standard_value (info->qualifier);
|
|
insert_fields (code, value, 0, 2, FLD_ldst_size, FLD_opc1);
|
|
}
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the address operand for e.g. STXRB <Ws>, <Wt>, [<Xn|SP>{,#0}]. */
|
|
bfd_boolean
|
|
aarch64_ins_addr_simple (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
/* Rn */
|
|
insert_field (FLD_Rn, code, info->addr.base_regno, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the address operand for e.g.
|
|
STR <Qt>, [<Xn|SP>, <R><m>{, <extend> {<amount>}}]. */
|
|
bfd_boolean
|
|
aarch64_ins_addr_regoff (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
aarch64_insn S;
|
|
enum aarch64_modifier_kind kind = info->shifter.kind;
|
|
|
|
/* Rn */
|
|
insert_field (FLD_Rn, code, info->addr.base_regno, 0);
|
|
/* Rm */
|
|
insert_field (FLD_Rm, code, info->addr.offset.regno, 0);
|
|
/* option */
|
|
if (kind == AARCH64_MOD_LSL)
|
|
kind = AARCH64_MOD_UXTX; /* Trick to enable the table-driven. */
|
|
insert_field (FLD_option, code, aarch64_get_operand_modifier_value (kind), 0);
|
|
/* S */
|
|
if (info->qualifier != AARCH64_OPND_QLF_S_B)
|
|
S = info->shifter.amount != 0;
|
|
else
|
|
/* For STR <Bt>, [<Xn|SP>, <R><m>{, <extend> {<amount>}},
|
|
S <amount>
|
|
0 [absent]
|
|
1 #0
|
|
Must be #0 if <extend> is explicitly LSL. */
|
|
S = info->shifter.operator_present && info->shifter.amount_present;
|
|
insert_field (FLD_S, code, S, 0);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the address operand for e.g.
|
|
stlur <Xt>, [<Xn|SP>{, <amount>}]. */
|
|
bfd_boolean
|
|
aarch64_ins_addr_offset (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
/* Rn */
|
|
insert_field (self->fields[0], code, info->addr.base_regno, 0);
|
|
|
|
/* simm9 */
|
|
int imm = info->addr.offset.imm;
|
|
insert_field (self->fields[1], code, imm, 0);
|
|
|
|
/* writeback */
|
|
if (info->addr.writeback)
|
|
{
|
|
assert (info->addr.preind == 1 && info->addr.postind == 0);
|
|
insert_field (self->fields[2], code, 1, 0);
|
|
}
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the address operand for e.g. LDRSW <Xt>, [<Xn|SP>, #<simm>]!. */
|
|
bfd_boolean
|
|
aarch64_ins_addr_simm (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
int imm;
|
|
|
|
/* Rn */
|
|
insert_field (FLD_Rn, code, info->addr.base_regno, 0);
|
|
/* simm (imm9 or imm7) */
|
|
imm = info->addr.offset.imm;
|
|
if (self->fields[0] == FLD_imm7)
|
|
/* scaled immediate in ld/st pair instructions.. */
|
|
imm >>= get_logsz (aarch64_get_qualifier_esize (info->qualifier));
|
|
insert_field (self->fields[0], code, imm, 0);
|
|
/* pre/post- index */
|
|
if (info->addr.writeback)
|
|
{
|
|
assert (inst->opcode->iclass != ldst_unscaled
|
|
&& inst->opcode->iclass != ldstnapair_offs
|
|
&& inst->opcode->iclass != ldstpair_off
|
|
&& inst->opcode->iclass != ldst_unpriv);
|
|
assert (info->addr.preind != info->addr.postind);
|
|
if (info->addr.preind)
|
|
insert_field (self->fields[1], code, 1, 0);
|
|
}
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the address operand for e.g. LDRAA <Xt>, [<Xn|SP>{, #<simm>}]. */
|
|
bfd_boolean
|
|
aarch64_ins_addr_simm10 (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
int imm;
|
|
|
|
/* Rn */
|
|
insert_field (self->fields[0], code, info->addr.base_regno, 0);
|
|
/* simm10 */
|
|
imm = info->addr.offset.imm >> 3;
|
|
insert_field (self->fields[1], code, imm >> 9, 0);
|
|
insert_field (self->fields[2], code, imm, 0);
|
|
/* writeback */
|
|
if (info->addr.writeback)
|
|
{
|
|
assert (info->addr.preind == 1 && info->addr.postind == 0);
|
|
insert_field (self->fields[3], code, 1, 0);
|
|
}
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the address operand for e.g. LDRSW <Xt>, [<Xn|SP>{, #<pimm>}]. */
|
|
bfd_boolean
|
|
aarch64_ins_addr_uimm12 (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
int shift = get_logsz (aarch64_get_qualifier_esize (info->qualifier));
|
|
|
|
/* Rn */
|
|
insert_field (self->fields[0], code, info->addr.base_regno, 0);
|
|
/* uimm12 */
|
|
insert_field (self->fields[1], code,info->addr.offset.imm >> shift, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the address operand for e.g.
|
|
LD1 {<Vt>.<T>, <Vt2>.<T>, <Vt3>.<T>}, [<Xn|SP>], <Xm|#<amount>>. */
|
|
bfd_boolean
|
|
aarch64_ins_simd_addr_post (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
/* Rn */
|
|
insert_field (FLD_Rn, code, info->addr.base_regno, 0);
|
|
/* Rm | #<amount> */
|
|
if (info->addr.offset.is_reg)
|
|
insert_field (FLD_Rm, code, info->addr.offset.regno, 0);
|
|
else
|
|
insert_field (FLD_Rm, code, 0x1f, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the condition operand for e.g. CSEL <Xd>, <Xn>, <Xm>, <cond>. */
|
|
bfd_boolean
|
|
aarch64_ins_cond (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
/* cond */
|
|
insert_field (FLD_cond, code, info->cond->value, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the system register operand for e.g. MRS <Xt>, <systemreg>. */
|
|
bfd_boolean
|
|
aarch64_ins_sysreg (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst,
|
|
aarch64_operand_error *detail ATTRIBUTE_UNUSED)
|
|
{
|
|
/* If a system instruction check if we have any restrictions on which
|
|
registers it can use. */
|
|
if (inst->opcode->iclass == ic_system)
|
|
{
|
|
uint64_t opcode_flags
|
|
= inst->opcode->flags & (F_SYS_READ | F_SYS_WRITE);
|
|
uint32_t sysreg_flags
|
|
= info->sysreg.flags & (F_REG_READ | F_REG_WRITE);
|
|
|
|
/* Check to see if it's read-only, else check if it's write only.
|
|
if it's both or unspecified don't care. */
|
|
if (opcode_flags == F_SYS_READ
|
|
&& sysreg_flags
|
|
&& sysreg_flags != F_REG_READ)
|
|
{
|
|
detail->kind = AARCH64_OPDE_SYNTAX_ERROR;
|
|
detail->error = _("specified register cannot be read from");
|
|
detail->index = info->idx;
|
|
detail->non_fatal = TRUE;
|
|
}
|
|
else if (opcode_flags == F_SYS_WRITE
|
|
&& sysreg_flags
|
|
&& sysreg_flags != F_REG_WRITE)
|
|
{
|
|
detail->kind = AARCH64_OPDE_SYNTAX_ERROR;
|
|
detail->error = _("specified register cannot be written to");
|
|
detail->index = info->idx;
|
|
detail->non_fatal = TRUE;
|
|
}
|
|
}
|
|
/* op0:op1:CRn:CRm:op2 */
|
|
insert_fields (code, info->sysreg.value, inst->opcode->mask, 5,
|
|
FLD_op2, FLD_CRm, FLD_CRn, FLD_op1, FLD_op0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the PSTATE field operand for e.g. MSR <pstatefield>, #<imm>. */
|
|
bfd_boolean
|
|
aarch64_ins_pstatefield (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
/* op1:op2 */
|
|
insert_fields (code, info->pstatefield, inst->opcode->mask, 2,
|
|
FLD_op2, FLD_op1);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the system instruction op operand for e.g. AT <at_op>, <Xt>. */
|
|
bfd_boolean
|
|
aarch64_ins_sysins_op (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
/* op1:CRn:CRm:op2 */
|
|
insert_fields (code, info->sysins_op->value, inst->opcode->mask, 4,
|
|
FLD_op2, FLD_CRm, FLD_CRn, FLD_op1);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the memory barrier option operand for e.g. DMB <option>|#<imm>. */
|
|
|
|
bfd_boolean
|
|
aarch64_ins_barrier (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
/* CRm */
|
|
insert_field (FLD_CRm, code, info->barrier->value, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the prefetch operation option operand for e.g.
|
|
PRFM <prfop>, [<Xn|SP>{, #<pimm>}]. */
|
|
|
|
bfd_boolean
|
|
aarch64_ins_prfop (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
/* prfop in Rt */
|
|
insert_field (FLD_Rt, code, info->prfop->value, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the hint number for instructions that alias HINT but take an
|
|
operand. */
|
|
|
|
bfd_boolean
|
|
aarch64_ins_hint (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
/* CRm:op2. */
|
|
insert_fields (code, info->hint_option->value, 0, 2, FLD_op2, FLD_CRm);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the extended register operand for e.g.
|
|
STR <Qt>, [<Xn|SP>, <R><m>{, <extend> {<amount>}}]. */
|
|
bfd_boolean
|
|
aarch64_ins_reg_extended (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
enum aarch64_modifier_kind kind;
|
|
|
|
/* Rm */
|
|
insert_field (FLD_Rm, code, info->reg.regno, 0);
|
|
/* option */
|
|
kind = info->shifter.kind;
|
|
if (kind == AARCH64_MOD_LSL)
|
|
kind = info->qualifier == AARCH64_OPND_QLF_W
|
|
? AARCH64_MOD_UXTW : AARCH64_MOD_UXTX;
|
|
insert_field (FLD_option, code, aarch64_get_operand_modifier_value (kind), 0);
|
|
/* imm3 */
|
|
insert_field (FLD_imm3, code, info->shifter.amount, 0);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode the shifted register operand for e.g.
|
|
SUBS <Xd>, <Xn>, <Xm> {, <shift> #<amount>}. */
|
|
bfd_boolean
|
|
aarch64_ins_reg_shifted (const aarch64_operand *self ATTRIBUTE_UNUSED,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
/* Rm */
|
|
insert_field (FLD_Rm, code, info->reg.regno, 0);
|
|
/* shift */
|
|
insert_field (FLD_shift, code,
|
|
aarch64_get_operand_modifier_value (info->shifter.kind), 0);
|
|
/* imm6 */
|
|
insert_field (FLD_imm6, code, info->shifter.amount, 0);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode an SVE address [<base>, #<simm4>*<factor>, MUL VL],
|
|
where <simm4> is a 4-bit signed value and where <factor> is 1 plus
|
|
SELF's operand-dependent value. fields[0] specifies the field that
|
|
holds <base>. <simm4> is encoded in the SVE_imm4 field. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_addr_ri_s4xvl (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
int factor = 1 + get_operand_specific_data (self);
|
|
insert_field (self->fields[0], code, info->addr.base_regno, 0);
|
|
insert_field (FLD_SVE_imm4, code, info->addr.offset.imm / factor, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode an SVE address [<base>, #<simm6>*<factor>, MUL VL],
|
|
where <simm6> is a 6-bit signed value and where <factor> is 1 plus
|
|
SELF's operand-dependent value. fields[0] specifies the field that
|
|
holds <base>. <simm6> is encoded in the SVE_imm6 field. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_addr_ri_s6xvl (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
int factor = 1 + get_operand_specific_data (self);
|
|
insert_field (self->fields[0], code, info->addr.base_regno, 0);
|
|
insert_field (FLD_SVE_imm6, code, info->addr.offset.imm / factor, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode an SVE address [<base>, #<simm9>*<factor>, MUL VL],
|
|
where <simm9> is a 9-bit signed value and where <factor> is 1 plus
|
|
SELF's operand-dependent value. fields[0] specifies the field that
|
|
holds <base>. <simm9> is encoded in the concatenation of the SVE_imm6
|
|
and imm3 fields, with imm3 being the less-significant part. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_addr_ri_s9xvl (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
int factor = 1 + get_operand_specific_data (self);
|
|
insert_field (self->fields[0], code, info->addr.base_regno, 0);
|
|
insert_fields (code, info->addr.offset.imm / factor, 0,
|
|
2, FLD_imm3, FLD_SVE_imm6);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode an SVE address [X<n>, #<SVE_imm4> << <shift>], where <SVE_imm4>
|
|
is a 4-bit signed number and where <shift> is SELF's operand-dependent
|
|
value. fields[0] specifies the base register field. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_addr_ri_s4 (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
int factor = 1 << get_operand_specific_data (self);
|
|
insert_field (self->fields[0], code, info->addr.base_regno, 0);
|
|
insert_field (FLD_SVE_imm4, code, info->addr.offset.imm / factor, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode an SVE address [X<n>, #<SVE_imm6> << <shift>], where <SVE_imm6>
|
|
is a 6-bit unsigned number and where <shift> is SELF's operand-dependent
|
|
value. fields[0] specifies the base register field. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_addr_ri_u6 (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
int factor = 1 << get_operand_specific_data (self);
|
|
insert_field (self->fields[0], code, info->addr.base_regno, 0);
|
|
insert_field (FLD_SVE_imm6, code, info->addr.offset.imm / factor, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode an SVE address [X<n>, X<m>{, LSL #<shift>}], where <shift>
|
|
is SELF's operand-dependent value. fields[0] specifies the base
|
|
register field and fields[1] specifies the offset register field. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_addr_rr_lsl (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
insert_field (self->fields[0], code, info->addr.base_regno, 0);
|
|
insert_field (self->fields[1], code, info->addr.offset.regno, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode an SVE address [X<n>, Z<m>.<T>, (S|U)XTW {#<shift>}], where
|
|
<shift> is SELF's operand-dependent value. fields[0] specifies the
|
|
base register field, fields[1] specifies the offset register field and
|
|
fields[2] is a single-bit field that selects SXTW over UXTW. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_addr_rz_xtw (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
insert_field (self->fields[0], code, info->addr.base_regno, 0);
|
|
insert_field (self->fields[1], code, info->addr.offset.regno, 0);
|
|
if (info->shifter.kind == AARCH64_MOD_UXTW)
|
|
insert_field (self->fields[2], code, 0, 0);
|
|
else
|
|
insert_field (self->fields[2], code, 1, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode an SVE address [Z<n>.<T>, #<imm5> << <shift>], where <imm5> is a
|
|
5-bit unsigned number and where <shift> is SELF's operand-dependent value.
|
|
fields[0] specifies the base register field. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_addr_zi_u5 (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
int factor = 1 << get_operand_specific_data (self);
|
|
insert_field (self->fields[0], code, info->addr.base_regno, 0);
|
|
insert_field (FLD_imm5, code, info->addr.offset.imm / factor, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode an SVE address [Z<n>.<T>, Z<m>.<T>{, <modifier> {#<msz>}}],
|
|
where <modifier> is fixed by the instruction and where <msz> is a
|
|
2-bit unsigned number. fields[0] specifies the base register field
|
|
and fields[1] specifies the offset register field. */
|
|
static bfd_boolean
|
|
aarch64_ext_sve_addr_zz (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
insert_field (self->fields[0], code, info->addr.base_regno, 0);
|
|
insert_field (self->fields[1], code, info->addr.offset.regno, 0);
|
|
insert_field (FLD_SVE_msz, code, info->shifter.amount, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode an SVE address [Z<n>.<T>, Z<m>.<T>{, LSL #<msz>}], where
|
|
<msz> is a 2-bit unsigned number. fields[0] specifies the base register
|
|
field and fields[1] specifies the offset register field. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_addr_zz_lsl (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors)
|
|
{
|
|
return aarch64_ext_sve_addr_zz (self, info, code, errors);
|
|
}
|
|
|
|
/* Encode an SVE address [Z<n>.<T>, Z<m>.<T>, SXTW {#<msz>}], where
|
|
<msz> is a 2-bit unsigned number. fields[0] specifies the base register
|
|
field and fields[1] specifies the offset register field. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_addr_zz_sxtw (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors)
|
|
{
|
|
return aarch64_ext_sve_addr_zz (self, info, code, errors);
|
|
}
|
|
|
|
/* Encode an SVE address [Z<n>.<T>, Z<m>.<T>, UXTW {#<msz>}], where
|
|
<msz> is a 2-bit unsigned number. fields[0] specifies the base register
|
|
field and fields[1] specifies the offset register field. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_addr_zz_uxtw (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors)
|
|
{
|
|
return aarch64_ext_sve_addr_zz (self, info, code, errors);
|
|
}
|
|
|
|
/* Encode an SVE ADD/SUB immediate. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_aimm (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
if (info->shifter.amount == 8)
|
|
insert_all_fields (self, code, (info->imm.value & 0xff) | 256);
|
|
else if (info->imm.value != 0 && (info->imm.value & 0xff) == 0)
|
|
insert_all_fields (self, code, ((info->imm.value / 256) & 0xff) | 256);
|
|
else
|
|
insert_all_fields (self, code, info->imm.value & 0xff);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode an SVE CPY/DUP immediate. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_asimm (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst,
|
|
aarch64_operand_error *errors)
|
|
{
|
|
return aarch64_ins_sve_aimm (self, info, code, inst, errors);
|
|
}
|
|
|
|
/* Encode Zn[MM], where MM has a 7-bit triangular encoding. The fields
|
|
array specifies which field to use for Zn. MM is encoded in the
|
|
concatenation of imm5 and SVE_tszh, with imm5 being the less
|
|
significant part. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_index (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
unsigned int esize = aarch64_get_qualifier_esize (info->qualifier);
|
|
insert_field (self->fields[0], code, info->reglane.regno, 0);
|
|
insert_fields (code, (info->reglane.index * 2 + 1) * esize, 0,
|
|
2, FLD_imm5, FLD_SVE_tszh);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode a logical/bitmask immediate for the MOV alias of SVE DUPM. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_limm_mov (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst,
|
|
aarch64_operand_error *errors)
|
|
{
|
|
return aarch64_ins_limm (self, info, code, inst, errors);
|
|
}
|
|
|
|
/* Encode Zn[MM], where Zn occupies the least-significant part of the field
|
|
and where MM occupies the most-significant part. The operand-dependent
|
|
value specifies the number of bits in Zn. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_quad_index (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
unsigned int reg_bits = get_operand_specific_data (self);
|
|
assert (info->reglane.regno < (1U << reg_bits));
|
|
unsigned int val = (info->reglane.index << reg_bits) + info->reglane.regno;
|
|
insert_all_fields (self, code, val);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode {Zn.<T> - Zm.<T>}. The fields array specifies which field
|
|
to use for Zn. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_reglist (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
insert_field (self->fields[0], code, info->reglist.first_regno, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode <pattern>{, MUL #<amount>}. The fields array specifies which
|
|
fields to use for <pattern>. <amount> - 1 is encoded in the SVE_imm4
|
|
field. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_scale (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
insert_all_fields (self, code, info->imm.value);
|
|
insert_field (FLD_SVE_imm4, code, info->shifter.amount - 1, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode an SVE shift left immediate. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_shlimm (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
const aarch64_opnd_info *prev_operand;
|
|
unsigned int esize;
|
|
|
|
assert (info->idx > 0);
|
|
prev_operand = &inst->operands[info->idx - 1];
|
|
esize = aarch64_get_qualifier_esize (prev_operand->qualifier);
|
|
insert_all_fields (self, code, 8 * esize + info->imm.value);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode an SVE shift right immediate. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_shrimm (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info, aarch64_insn *code,
|
|
const aarch64_inst *inst,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
const aarch64_opnd_info *prev_operand;
|
|
unsigned int esize;
|
|
|
|
assert (info->idx > 0);
|
|
prev_operand = &inst->operands[info->idx - 1];
|
|
esize = aarch64_get_qualifier_esize (prev_operand->qualifier);
|
|
insert_all_fields (self, code, 16 * esize - info->imm.value);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode a single-bit immediate that selects between #0.5 and #1.0.
|
|
The fields array specifies which field to use. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_float_half_one (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
if (info->imm.value == 0x3f000000)
|
|
insert_field (self->fields[0], code, 0, 0);
|
|
else
|
|
insert_field (self->fields[0], code, 1, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode a single-bit immediate that selects between #0.5 and #2.0.
|
|
The fields array specifies which field to use. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_float_half_two (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
if (info->imm.value == 0x3f000000)
|
|
insert_field (self->fields[0], code, 0, 0);
|
|
else
|
|
insert_field (self->fields[0], code, 1, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Encode a single-bit immediate that selects between #0.0 and #1.0.
|
|
The fields array specifies which field to use. */
|
|
bfd_boolean
|
|
aarch64_ins_sve_float_zero_one (const aarch64_operand *self,
|
|
const aarch64_opnd_info *info,
|
|
aarch64_insn *code,
|
|
const aarch64_inst *inst ATTRIBUTE_UNUSED,
|
|
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
|
|
{
|
|
if (info->imm.value == 0)
|
|
insert_field (self->fields[0], code, 0, 0);
|
|
else
|
|
insert_field (self->fields[0], code, 1, 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/* Miscellaneous encoding functions. */
|
|
|
|
/* Encode size[0], i.e. bit 22, for
|
|
e.g. FCVTN<Q> <Vd>.<Tb>, <Vn>.<Ta>. */
|
|
|
|
static void
|
|
encode_asimd_fcvt (aarch64_inst *inst)
|
|
{
|
|
aarch64_insn value;
|
|
aarch64_field field = {0, 0};
|
|
enum aarch64_opnd_qualifier qualifier;
|
|
|
|
switch (inst->opcode->op)
|
|
{
|
|
case OP_FCVTN:
|
|
case OP_FCVTN2:
|
|
/* FCVTN<Q> <Vd>.<Tb>, <Vn>.<Ta>. */
|
|
qualifier = inst->operands[1].qualifier;
|
|
break;
|
|
case OP_FCVTL:
|
|
case OP_FCVTL2:
|
|
/* FCVTL<Q> <Vd>.<Ta>, <Vn>.<Tb>. */
|
|
qualifier = inst->operands[0].qualifier;
|
|
break;
|
|
default:
|
|
assert (0);
|
|
}
|
|
assert (qualifier == AARCH64_OPND_QLF_V_4S
|
|
|| qualifier == AARCH64_OPND_QLF_V_2D);
|
|
value = (qualifier == AARCH64_OPND_QLF_V_4S) ? 0 : 1;
|
|
gen_sub_field (FLD_size, 0, 1, &field);
|
|
insert_field_2 (&field, &inst->value, value, 0);
|
|
}
|
|
|
|
/* Encode size[0], i.e. bit 22, for
|
|
e.g. FCVTXN <Vb><d>, <Va><n>. */
|
|
|
|
static void
|
|
encode_asisd_fcvtxn (aarch64_inst *inst)
|
|
{
|
|
aarch64_insn val = 1;
|
|
aarch64_field field = {0, 0};
|
|
assert (inst->operands[0].qualifier == AARCH64_OPND_QLF_S_S);
|
|
gen_sub_field (FLD_size, 0, 1, &field);
|
|
insert_field_2 (&field, &inst->value, val, 0);
|
|
}
|
|
|
|
/* Encode the 'opc' field for e.g. FCVT <Dd>, <Sn>. */
|
|
static void
|
|
encode_fcvt (aarch64_inst *inst)
|
|
{
|
|
aarch64_insn val;
|
|
const aarch64_field field = {15, 2};
|
|
|
|
/* opc dstsize */
|
|
switch (inst->operands[0].qualifier)
|
|
{
|
|
case AARCH64_OPND_QLF_S_S: val = 0; break;
|
|
case AARCH64_OPND_QLF_S_D: val = 1; break;
|
|
case AARCH64_OPND_QLF_S_H: val = 3; break;
|
|
default: abort ();
|
|
}
|
|
insert_field_2 (&field, &inst->value, val, 0);
|
|
|
|
return;
|
|
}
|
|
|
|
/* Return the index in qualifiers_list that INST is using. Should only
|
|
be called once the qualifiers are known to be valid. */
|
|
|
|
static int
|
|
aarch64_get_variant (struct aarch64_inst *inst)
|
|
{
|
|
int i, nops, variant;
|
|
|
|
nops = aarch64_num_of_operands (inst->opcode);
|
|
for (variant = 0; variant < AARCH64_MAX_QLF_SEQ_NUM; ++variant)
|
|
{
|
|
for (i = 0; i < nops; ++i)
|
|
if (inst->opcode->qualifiers_list[variant][i]
|
|
!= inst->operands[i].qualifier)
|
|
break;
|
|
if (i == nops)
|
|
return variant;
|
|
}
|
|
abort ();
|
|
}
|
|
|
|
/* Do miscellaneous encodings that are not common enough to be driven by
|
|
flags. */
|
|
|
|
static void
|
|
do_misc_encoding (aarch64_inst *inst)
|
|
{
|
|
unsigned int value;
|
|
|
|
switch (inst->opcode->op)
|
|
{
|
|
case OP_FCVT:
|
|
encode_fcvt (inst);
|
|
break;
|
|
case OP_FCVTN:
|
|
case OP_FCVTN2:
|
|
case OP_FCVTL:
|
|
case OP_FCVTL2:
|
|
encode_asimd_fcvt (inst);
|
|
break;
|
|
case OP_FCVTXN_S:
|
|
encode_asisd_fcvtxn (inst);
|
|
break;
|
|
case OP_MOV_P_P:
|
|
case OP_MOVS_P_P:
|
|
/* Copy Pn to Pm and Pg. */
|
|
value = extract_field (FLD_SVE_Pn, inst->value, 0);
|
|
insert_field (FLD_SVE_Pm, &inst->value, value, 0);
|
|
insert_field (FLD_SVE_Pg4_10, &inst->value, value, 0);
|
|
break;
|
|
case OP_MOV_Z_P_Z:
|
|
/* Copy Zd to Zm. */
|
|
value = extract_field (FLD_SVE_Zd, inst->value, 0);
|
|
insert_field (FLD_SVE_Zm_16, &inst->value, value, 0);
|
|
break;
|
|
case OP_MOV_Z_V:
|
|
/* Fill in the zero immediate. */
|
|
insert_fields (&inst->value, 1 << aarch64_get_variant (inst), 0,
|
|
2, FLD_imm5, FLD_SVE_tszh);
|
|
break;
|
|
case OP_MOV_Z_Z:
|
|
/* Copy Zn to Zm. */
|
|
value = extract_field (FLD_SVE_Zn, inst->value, 0);
|
|
insert_field (FLD_SVE_Zm_16, &inst->value, value, 0);
|
|
break;
|
|
case OP_MOV_Z_Zi:
|
|
break;
|
|
case OP_MOVM_P_P_P:
|
|
/* Copy Pd to Pm. */
|
|
value = extract_field (FLD_SVE_Pd, inst->value, 0);
|
|
insert_field (FLD_SVE_Pm, &inst->value, value, 0);
|
|
break;
|
|
case OP_MOVZS_P_P_P:
|
|
case OP_MOVZ_P_P_P:
|
|
/* Copy Pn to Pm. */
|
|
value = extract_field (FLD_SVE_Pn, inst->value, 0);
|
|
insert_field (FLD_SVE_Pm, &inst->value, value, 0);
|
|
break;
|
|
case OP_NOTS_P_P_P_Z:
|
|
case OP_NOT_P_P_P_Z:
|
|
/* Copy Pg to Pm. */
|
|
value = extract_field (FLD_SVE_Pg4_10, inst->value, 0);
|
|
insert_field (FLD_SVE_Pm, &inst->value, value, 0);
|
|
break;
|
|
default: break;
|
|
}
|
|
}
|
|
|
|
/* Encode the 'size' and 'Q' field for e.g. SHADD. */
|
|
static void
|
|
encode_sizeq (aarch64_inst *inst)
|
|
{
|
|
aarch64_insn sizeq;
|
|
enum aarch64_field_kind kind;
|
|
int idx;
|
|
|
|
/* Get the index of the operand whose information we are going to use
|
|
to encode the size and Q fields.
|
|
This is deduced from the possible valid qualifier lists. */
|
|
idx = aarch64_select_operand_for_sizeq_field_coding (inst->opcode);
|
|
DEBUG_TRACE ("idx: %d; qualifier: %s", idx,
|
|
aarch64_get_qualifier_name (inst->operands[idx].qualifier));
|
|
sizeq = aarch64_get_qualifier_standard_value (inst->operands[idx].qualifier);
|
|
/* Q */
|
|
insert_field (FLD_Q, &inst->value, sizeq & 0x1, inst->opcode->mask);
|
|
/* size */
|
|
if (inst->opcode->iclass == asisdlse
|
|
|| inst->opcode->iclass == asisdlsep
|
|
|| inst->opcode->iclass == asisdlso
|
|
|| inst->opcode->iclass == asisdlsop)
|
|
kind = FLD_vldst_size;
|
|
else
|
|
kind = FLD_size;
|
|
insert_field (kind, &inst->value, (sizeq >> 1) & 0x3, inst->opcode->mask);
|
|
}
|
|
|
|
/* Opcodes that have fields shared by multiple operands are usually flagged
|
|
with flags. In this function, we detect such flags and use the
|
|
information in one of the related operands to do the encoding. The 'one'
|
|
operand is not any operand but one of the operands that has the enough
|
|
information for such an encoding. */
|
|
|
|
static void
|
|
do_special_encoding (struct aarch64_inst *inst)
|
|
{
|
|
int idx;
|
|
aarch64_insn value = 0;
|
|
|
|
DEBUG_TRACE ("enter with coding 0x%x", (uint32_t) inst->value);
|
|
|
|
/* Condition for truly conditional executed instructions, e.g. b.cond. */
|
|
if (inst->opcode->flags & F_COND)
|
|
{
|
|
insert_field (FLD_cond2, &inst->value, inst->cond->value, 0);
|
|
}
|
|
if (inst->opcode->flags & F_SF)
|
|
{
|
|
idx = select_operand_for_sf_field_coding (inst->opcode);
|
|
value = (inst->operands[idx].qualifier == AARCH64_OPND_QLF_X
|
|
|| inst->operands[idx].qualifier == AARCH64_OPND_QLF_SP)
|
|
? 1 : 0;
|
|
insert_field (FLD_sf, &inst->value, value, 0);
|
|
if (inst->opcode->flags & F_N)
|
|
insert_field (FLD_N, &inst->value, value, inst->opcode->mask);
|
|
}
|
|
if (inst->opcode->flags & F_LSE_SZ)
|
|
{
|
|
idx = select_operand_for_sf_field_coding (inst->opcode);
|
|
value = (inst->operands[idx].qualifier == AARCH64_OPND_QLF_X
|
|
|| inst->operands[idx].qualifier == AARCH64_OPND_QLF_SP)
|
|
? 1 : 0;
|
|
insert_field (FLD_lse_sz, &inst->value, value, 0);
|
|
}
|
|
if (inst->opcode->flags & F_SIZEQ)
|
|
encode_sizeq (inst);
|
|
if (inst->opcode->flags & F_FPTYPE)
|
|
{
|
|
idx = select_operand_for_fptype_field_coding (inst->opcode);
|
|
switch (inst->operands[idx].qualifier)
|
|
{
|
|
case AARCH64_OPND_QLF_S_S: value = 0; break;
|
|
case AARCH64_OPND_QLF_S_D: value = 1; break;
|
|
case AARCH64_OPND_QLF_S_H: value = 3; break;
|
|
default: assert (0);
|
|
}
|
|
insert_field (FLD_type, &inst->value, value, 0);
|
|
}
|
|
if (inst->opcode->flags & F_SSIZE)
|
|
{
|
|
enum aarch64_opnd_qualifier qualifier;
|
|
idx = select_operand_for_scalar_size_field_coding (inst->opcode);
|
|
qualifier = inst->operands[idx].qualifier;
|
|
assert (qualifier >= AARCH64_OPND_QLF_S_B
|
|
&& qualifier <= AARCH64_OPND_QLF_S_Q);
|
|
value = aarch64_get_qualifier_standard_value (qualifier);
|
|
insert_field (FLD_size, &inst->value, value, inst->opcode->mask);
|
|
}
|
|
if (inst->opcode->flags & F_T)
|
|
{
|
|
int num; /* num of consecutive '0's on the right side of imm5<3:0>. */
|
|
aarch64_field field = {0, 0};
|
|
enum aarch64_opnd_qualifier qualifier;
|
|
|
|
idx = 0;
|
|
qualifier = inst->operands[idx].qualifier;
|
|
assert (aarch64_get_operand_class (inst->opcode->operands[0])
|
|
== AARCH64_OPND_CLASS_SIMD_REG
|
|
&& qualifier >= AARCH64_OPND_QLF_V_8B
|
|
&& qualifier <= AARCH64_OPND_QLF_V_2D);
|
|
/* imm5<3:0> q <t>
|
|
0000 x reserved
|
|
xxx1 0 8b
|
|
xxx1 1 16b
|
|
xx10 0 4h
|
|
xx10 1 8h
|
|
x100 0 2s
|
|
x100 1 4s
|
|
1000 0 reserved
|
|
1000 1 2d */
|
|
value = aarch64_get_qualifier_standard_value (qualifier);
|
|
insert_field (FLD_Q, &inst->value, value & 0x1, inst->opcode->mask);
|
|
num = (int) value >> 1;
|
|
assert (num >= 0 && num <= 3);
|
|
gen_sub_field (FLD_imm5, 0, num + 1, &field);
|
|
insert_field_2 (&field, &inst->value, 1 << num, inst->opcode->mask);
|
|
}
|
|
if (inst->opcode->flags & F_GPRSIZE_IN_Q)
|
|
{
|
|
/* Use Rt to encode in the case of e.g.
|
|
STXP <Ws>, <Xt1>, <Xt2>, [<Xn|SP>{,#0}]. */
|
|
enum aarch64_opnd_qualifier qualifier;
|
|
idx = aarch64_operand_index (inst->opcode->operands, AARCH64_OPND_Rt);
|
|
if (idx == -1)
|
|
/* Otherwise use the result operand, which has to be a integer
|
|
register. */
|
|
idx = 0;
|
|
assert (idx == 0 || idx == 1);
|
|
assert (aarch64_get_operand_class (inst->opcode->operands[idx])
|
|
== AARCH64_OPND_CLASS_INT_REG);
|
|
qualifier = inst->operands[idx].qualifier;
|
|
insert_field (FLD_Q, &inst->value,
|
|
aarch64_get_qualifier_standard_value (qualifier), 0);
|
|
}
|
|
if (inst->opcode->flags & F_LDS_SIZE)
|
|
{
|
|
/* e.g. LDRSB <Wt>, [<Xn|SP>, <R><m>{, <extend> {<amount>}}]. */
|
|
enum aarch64_opnd_qualifier qualifier;
|
|
aarch64_field field = {0, 0};
|
|
assert (aarch64_get_operand_class (inst->opcode->operands[0])
|
|
== AARCH64_OPND_CLASS_INT_REG);
|
|
gen_sub_field (FLD_opc, 0, 1, &field);
|
|
qualifier = inst->operands[0].qualifier;
|
|
insert_field_2 (&field, &inst->value,
|
|
1 - aarch64_get_qualifier_standard_value (qualifier), 0);
|
|
}
|
|
/* Miscellaneous encoding as the last step. */
|
|
if (inst->opcode->flags & F_MISC)
|
|
do_misc_encoding (inst);
|
|
|
|
DEBUG_TRACE ("exit with coding 0x%x", (uint32_t) inst->value);
|
|
}
|
|
|
|
/* Some instructions (including all SVE ones) use the instruction class
|
|
to describe how a qualifiers_list index is represented in the instruction
|
|
encoding. If INST is such an instruction, encode the chosen qualifier
|
|
variant. */
|
|
|
|
static void
|
|
aarch64_encode_variant_using_iclass (struct aarch64_inst *inst)
|
|
{
|
|
switch (inst->opcode->iclass)
|
|
{
|
|
case sve_cpy:
|
|
insert_fields (&inst->value, aarch64_get_variant (inst),
|
|
0, 2, FLD_SVE_M_14, FLD_size);
|
|
break;
|
|
|
|
case sve_index:
|
|
case sve_shift_pred:
|
|
case sve_shift_unpred:
|
|
/* For indices and shift amounts, the variant is encoded as
|
|
part of the immediate. */
|
|
break;
|
|
|
|
case sve_limm:
|
|
/* For sve_limm, the .B, .H, and .S forms are just a convenience
|
|
and depend on the immediate. They don't have a separate
|
|
encoding. */
|
|
break;
|
|
|
|
case sve_misc:
|
|
/* sve_misc instructions have only a single variant. */
|
|
break;
|
|
|
|
case sve_movprfx:
|
|
insert_fields (&inst->value, aarch64_get_variant (inst),
|
|
0, 2, FLD_SVE_M_16, FLD_size);
|
|
break;
|
|
|
|
case sve_pred_zm:
|
|
insert_field (FLD_SVE_M_4, &inst->value, aarch64_get_variant (inst), 0);
|
|
break;
|
|
|
|
case sve_size_bhs:
|
|
case sve_size_bhsd:
|
|
insert_field (FLD_size, &inst->value, aarch64_get_variant (inst), 0);
|
|
break;
|
|
|
|
case sve_size_hsd:
|
|
insert_field (FLD_size, &inst->value, aarch64_get_variant (inst) + 1, 0);
|
|
break;
|
|
|
|
case sve_size_sd:
|
|
insert_field (FLD_SVE_sz, &inst->value, aarch64_get_variant (inst), 0);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Converters converting an alias opcode instruction to its real form. */
|
|
|
|
/* ROR <Wd>, <Ws>, #<shift>
|
|
is equivalent to:
|
|
EXTR <Wd>, <Ws>, <Ws>, #<shift>. */
|
|
static void
|
|
convert_ror_to_extr (aarch64_inst *inst)
|
|
{
|
|
copy_operand_info (inst, 3, 2);
|
|
copy_operand_info (inst, 2, 1);
|
|
}
|
|
|
|
/* UXTL<Q> <Vd>.<Ta>, <Vn>.<Tb>
|
|
is equivalent to:
|
|
USHLL<Q> <Vd>.<Ta>, <Vn>.<Tb>, #0. */
|
|
static void
|
|
convert_xtl_to_shll (aarch64_inst *inst)
|
|
{
|
|
inst->operands[2].qualifier = inst->operands[1].qualifier;
|
|
inst->operands[2].imm.value = 0;
|
|
}
|
|
|
|
/* Convert
|
|
LSR <Xd>, <Xn>, #<shift>
|
|
to
|
|
UBFM <Xd>, <Xn>, #<shift>, #63. */
|
|
static void
|
|
convert_sr_to_bfm (aarch64_inst *inst)
|
|
{
|
|
inst->operands[3].imm.value =
|
|
inst->operands[2].qualifier == AARCH64_OPND_QLF_imm_0_31 ? 31 : 63;
|
|
}
|
|
|
|
/* Convert MOV to ORR. */
|
|
static void
|
|
convert_mov_to_orr (aarch64_inst *inst)
|
|
{
|
|
/* MOV <Vd>.<T>, <Vn>.<T>
|
|
is equivalent to:
|
|
ORR <Vd>.<T>, <Vn>.<T>, <Vn>.<T>. */
|
|
copy_operand_info (inst, 2, 1);
|
|
}
|
|
|
|
/* When <imms> >= <immr>, the instruction written:
|
|
SBFX <Xd>, <Xn>, #<lsb>, #<width>
|
|
is equivalent to:
|
|
SBFM <Xd>, <Xn>, #<lsb>, #(<lsb>+<width>-1). */
|
|
|
|
static void
|
|
convert_bfx_to_bfm (aarch64_inst *inst)
|
|
{
|
|
int64_t lsb, width;
|
|
|
|
/* Convert the operand. */
|
|
lsb = inst->operands[2].imm.value;
|
|
width = inst->operands[3].imm.value;
|
|
inst->operands[2].imm.value = lsb;
|
|
inst->operands[3].imm.value = lsb + width - 1;
|
|
}
|
|
|
|
/* When <imms> < <immr>, the instruction written:
|
|
SBFIZ <Xd>, <Xn>, #<lsb>, #<width>
|
|
is equivalent to:
|
|
SBFM <Xd>, <Xn>, #((64-<lsb>)&0x3f), #(<width>-1). */
|
|
|
|
static void
|
|
convert_bfi_to_bfm (aarch64_inst *inst)
|
|
{
|
|
int64_t lsb, width;
|
|
|
|
/* Convert the operand. */
|
|
lsb = inst->operands[2].imm.value;
|
|
width = inst->operands[3].imm.value;
|
|
if (inst->operands[2].qualifier == AARCH64_OPND_QLF_imm_0_31)
|
|
{
|
|
inst->operands[2].imm.value = (32 - lsb) & 0x1f;
|
|
inst->operands[3].imm.value = width - 1;
|
|
}
|
|
else
|
|
{
|
|
inst->operands[2].imm.value = (64 - lsb) & 0x3f;
|
|
inst->operands[3].imm.value = width - 1;
|
|
}
|
|
}
|
|
|
|
/* The instruction written:
|
|
BFC <Xd>, #<lsb>, #<width>
|
|
is equivalent to:
|
|
BFM <Xd>, XZR, #((64-<lsb>)&0x3f), #(<width>-1). */
|
|
|
|
static void
|
|
convert_bfc_to_bfm (aarch64_inst *inst)
|
|
{
|
|
int64_t lsb, width;
|
|
|
|
/* Insert XZR. */
|
|
copy_operand_info (inst, 3, 2);
|
|
copy_operand_info (inst, 2, 1);
|
|
copy_operand_info (inst, 1, 0);
|
|
inst->operands[1].reg.regno = 0x1f;
|
|
|
|
/* Convert the immediate operand. */
|
|
lsb = inst->operands[2].imm.value;
|
|
width = inst->operands[3].imm.value;
|
|
if (inst->operands[2].qualifier == AARCH64_OPND_QLF_imm_0_31)
|
|
{
|
|
inst->operands[2].imm.value = (32 - lsb) & 0x1f;
|
|
inst->operands[3].imm.value = width - 1;
|
|
}
|
|
else
|
|
{
|
|
inst->operands[2].imm.value = (64 - lsb) & 0x3f;
|
|
inst->operands[3].imm.value = width - 1;
|
|
}
|
|
}
|
|
|
|
/* The instruction written:
|
|
LSL <Xd>, <Xn>, #<shift>
|
|
is equivalent to:
|
|
UBFM <Xd>, <Xn>, #((64-<shift>)&0x3f), #(63-<shift>). */
|
|
|
|
static void
|
|
convert_lsl_to_ubfm (aarch64_inst *inst)
|
|
{
|
|
int64_t shift = inst->operands[2].imm.value;
|
|
|
|
if (inst->operands[2].qualifier == AARCH64_OPND_QLF_imm_0_31)
|
|
{
|
|
inst->operands[2].imm.value = (32 - shift) & 0x1f;
|
|
inst->operands[3].imm.value = 31 - shift;
|
|
}
|
|
else
|
|
{
|
|
inst->operands[2].imm.value = (64 - shift) & 0x3f;
|
|
inst->operands[3].imm.value = 63 - shift;
|
|
}
|
|
}
|
|
|
|
/* CINC <Wd>, <Wn>, <cond>
|
|
is equivalent to:
|
|
CSINC <Wd>, <Wn>, <Wn>, invert(<cond>). */
|
|
|
|
static void
|
|
convert_to_csel (aarch64_inst *inst)
|
|
{
|
|
copy_operand_info (inst, 3, 2);
|
|
copy_operand_info (inst, 2, 1);
|
|
inst->operands[3].cond = get_inverted_cond (inst->operands[3].cond);
|
|
}
|
|
|
|
/* CSET <Wd>, <cond>
|
|
is equivalent to:
|
|
CSINC <Wd>, WZR, WZR, invert(<cond>). */
|
|
|
|
static void
|
|
convert_cset_to_csinc (aarch64_inst *inst)
|
|
{
|
|
copy_operand_info (inst, 3, 1);
|
|
copy_operand_info (inst, 2, 0);
|
|
copy_operand_info (inst, 1, 0);
|
|
inst->operands[1].reg.regno = 0x1f;
|
|
inst->operands[2].reg.regno = 0x1f;
|
|
inst->operands[3].cond = get_inverted_cond (inst->operands[3].cond);
|
|
}
|
|
|
|
/* MOV <Wd>, #<imm>
|
|
is equivalent to:
|
|
MOVZ <Wd>, #<imm16>, LSL #<shift>. */
|
|
|
|
static void
|
|
convert_mov_to_movewide (aarch64_inst *inst)
|
|
{
|
|
int is32;
|
|
uint32_t shift_amount;
|
|
uint64_t value;
|
|
|
|
switch (inst->opcode->op)
|
|
{
|
|
case OP_MOV_IMM_WIDE:
|
|
value = inst->operands[1].imm.value;
|
|
break;
|
|
case OP_MOV_IMM_WIDEN:
|
|
value = ~inst->operands[1].imm.value;
|
|
break;
|
|
default:
|
|
assert (0);
|
|
}
|
|
inst->operands[1].type = AARCH64_OPND_HALF;
|
|
is32 = inst->operands[0].qualifier == AARCH64_OPND_QLF_W;
|
|
if (! aarch64_wide_constant_p (value, is32, &shift_amount))
|
|
/* The constraint check should have guaranteed this wouldn't happen. */
|
|
assert (0);
|
|
value >>= shift_amount;
|
|
value &= 0xffff;
|
|
inst->operands[1].imm.value = value;
|
|
inst->operands[1].shifter.kind = AARCH64_MOD_LSL;
|
|
inst->operands[1].shifter.amount = shift_amount;
|
|
}
|
|
|
|
/* MOV <Wd>, #<imm>
|
|
is equivalent to:
|
|
ORR <Wd>, WZR, #<imm>. */
|
|
|
|
static void
|
|
convert_mov_to_movebitmask (aarch64_inst *inst)
|
|
{
|
|
copy_operand_info (inst, 2, 1);
|
|
inst->operands[1].reg.regno = 0x1f;
|
|
inst->operands[1].skip = 0;
|
|
}
|
|
|
|
/* Some alias opcodes are assembled by being converted to their real-form. */
|
|
|
|
static void
|
|
convert_to_real (aarch64_inst *inst, const aarch64_opcode *real)
|
|
{
|
|
const aarch64_opcode *alias = inst->opcode;
|
|
|
|
if ((alias->flags & F_CONV) == 0)
|
|
goto convert_to_real_return;
|
|
|
|
switch (alias->op)
|
|
{
|
|
case OP_ASR_IMM:
|
|
case OP_LSR_IMM:
|
|
convert_sr_to_bfm (inst);
|
|
break;
|
|
case OP_LSL_IMM:
|
|
convert_lsl_to_ubfm (inst);
|
|
break;
|
|
case OP_CINC:
|
|
case OP_CINV:
|
|
case OP_CNEG:
|
|
convert_to_csel (inst);
|
|
break;
|
|
case OP_CSET:
|
|
case OP_CSETM:
|
|
convert_cset_to_csinc (inst);
|
|
break;
|
|
case OP_UBFX:
|
|
case OP_BFXIL:
|
|
case OP_SBFX:
|
|
convert_bfx_to_bfm (inst);
|
|
break;
|
|
case OP_SBFIZ:
|
|
case OP_BFI:
|
|
case OP_UBFIZ:
|
|
convert_bfi_to_bfm (inst);
|
|
break;
|
|
case OP_BFC:
|
|
convert_bfc_to_bfm (inst);
|
|
break;
|
|
case OP_MOV_V:
|
|
convert_mov_to_orr (inst);
|
|
break;
|
|
case OP_MOV_IMM_WIDE:
|
|
case OP_MOV_IMM_WIDEN:
|
|
convert_mov_to_movewide (inst);
|
|
break;
|
|
case OP_MOV_IMM_LOG:
|
|
convert_mov_to_movebitmask (inst);
|
|
break;
|
|
case OP_ROR_IMM:
|
|
convert_ror_to_extr (inst);
|
|
break;
|
|
case OP_SXTL:
|
|
case OP_SXTL2:
|
|
case OP_UXTL:
|
|
case OP_UXTL2:
|
|
convert_xtl_to_shll (inst);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
convert_to_real_return:
|
|
aarch64_replace_opcode (inst, real);
|
|
}
|
|
|
|
/* Encode *INST_ORI of the opcode code OPCODE.
|
|
Return the encoded result in *CODE and if QLF_SEQ is not NULL, return the
|
|
matched operand qualifier sequence in *QLF_SEQ. */
|
|
|
|
bfd_boolean
|
|
aarch64_opcode_encode (const aarch64_opcode *opcode,
|
|
const aarch64_inst *inst_ori, aarch64_insn *code,
|
|
aarch64_opnd_qualifier_t *qlf_seq,
|
|
aarch64_operand_error *mismatch_detail)
|
|
{
|
|
int i;
|
|
const aarch64_opcode *aliased;
|
|
aarch64_inst copy, *inst;
|
|
|
|
DEBUG_TRACE ("enter with %s", opcode->name);
|
|
|
|
/* Create a copy of *INST_ORI, so that we can do any change we want. */
|
|
copy = *inst_ori;
|
|
inst = ©
|
|
|
|
assert (inst->opcode == NULL || inst->opcode == opcode);
|
|
if (inst->opcode == NULL)
|
|
inst->opcode = opcode;
|
|
|
|
/* Constrain the operands.
|
|
After passing this, the encoding is guaranteed to succeed. */
|
|
if (aarch64_match_operands_constraint (inst, mismatch_detail) == 0)
|
|
{
|
|
DEBUG_TRACE ("FAIL since operand constraint not met");
|
|
return 0;
|
|
}
|
|
|
|
/* Get the base value.
|
|
Note: this has to be before the aliasing handling below in order to
|
|
get the base value from the alias opcode before we move on to the
|
|
aliased opcode for encoding. */
|
|
inst->value = opcode->opcode;
|
|
|
|
/* No need to do anything else if the opcode does not have any operand. */
|
|
if (aarch64_num_of_operands (opcode) == 0)
|
|
goto encoding_exit;
|
|
|
|
/* Assign operand indexes and check types. Also put the matched
|
|
operand qualifiers in *QLF_SEQ to return. */
|
|
for (i = 0; i < AARCH64_MAX_OPND_NUM; ++i)
|
|
{
|
|
assert (opcode->operands[i] == inst->operands[i].type);
|
|
inst->operands[i].idx = i;
|
|
if (qlf_seq != NULL)
|
|
*qlf_seq = inst->operands[i].qualifier;
|
|
}
|
|
|
|
aliased = aarch64_find_real_opcode (opcode);
|
|
/* If the opcode is an alias and it does not ask for direct encoding by
|
|
itself, the instruction will be transformed to the form of real opcode
|
|
and the encoding will be carried out using the rules for the aliased
|
|
opcode. */
|
|
if (aliased != NULL && (opcode->flags & F_CONV))
|
|
{
|
|
DEBUG_TRACE ("real opcode '%s' has been found for the alias %s",
|
|
aliased->name, opcode->name);
|
|
/* Convert the operands to the form of the real opcode. */
|
|
convert_to_real (inst, aliased);
|
|
opcode = aliased;
|
|
}
|
|
|
|
aarch64_opnd_info *info = inst->operands;
|
|
|
|
/* Call the inserter of each operand. */
|
|
for (i = 0; i < AARCH64_MAX_OPND_NUM; ++i, ++info)
|
|
{
|
|
const aarch64_operand *opnd;
|
|
enum aarch64_opnd type = opcode->operands[i];
|
|
if (type == AARCH64_OPND_NIL)
|
|
break;
|
|
if (info->skip)
|
|
{
|
|
DEBUG_TRACE ("skip the incomplete operand %d", i);
|
|
continue;
|
|
}
|
|
opnd = &aarch64_operands[type];
|
|
if (operand_has_inserter (opnd)
|
|
&& !aarch64_insert_operand (opnd, info, &inst->value, inst,
|
|
mismatch_detail))
|
|
return FALSE;
|
|
}
|
|
|
|
/* Call opcode encoders indicated by flags. */
|
|
if (opcode_has_special_coder (opcode))
|
|
do_special_encoding (inst);
|
|
|
|
/* Possibly use the instruction class to encode the chosen qualifier
|
|
variant. */
|
|
aarch64_encode_variant_using_iclass (inst);
|
|
|
|
encoding_exit:
|
|
DEBUG_TRACE ("exit with %s", opcode->name);
|
|
|
|
*code = inst->value;
|
|
|
|
return TRUE;
|
|
}
|