binutils-gdb/sim/msp430/ChangeLog
Mike Frysinger b5689863bd sim: unify bfd library dependency testing logic
Move these options up to the common dir so we only test & export
them once across all ports.
2021-06-19 01:08:39 -04:00

498 lines
13 KiB
Plaintext

2021-06-19 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4: Regenerate.
* configure: Regenerate.
2021-06-19 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2021-06-18 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4, configure: Regenerate.
2021-06-18 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2021-06-18 Mike Frysinger <vapier@gentoo.org>
* msp430-sim.c: Include sim-signal.h.
* sim-main.h: Delete sim-signal.h include.
2021-06-17 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
* msp430-sim.c (sim_open): Set current_target_byte_order.
* aclocal.m4, configure: Regenerate.
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
* config.in: Removed.
2021-06-15 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2021-06-14 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Delete call to SIM_AC_OPTION_WARNINGS.
* configure: Regenerate.
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT.
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4, config.in, configure: Regenerate.
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2021-05-17 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Delete.
2021-05-17 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Define.
(struct sim_state): Delete.
2021-05-16 Mike Frysinger <vapier@gentoo.org>
* msp430-sim.c: Replace config.h include with defs.h.
2021-05-16 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2021-05-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2021-05-01 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2021-04-26 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (NL_TARGET): Delete.
2021-04-26 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4, config.in, configure: Regenerate.
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
2021-04-21 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4: Regenerate.
2021-04-21 Simon Marchi <simon.marchi@polymtl.ca>
* configure: Regenerate.
2021-04-18 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2021-04-18 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Delete AC_CHECK_HEADERS call.
* config.in, configure: Regenerate.
2021-04-18 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2021-04-12 Mike Frysinger <vapier@gentoo.org>
* msp430-sim.c (sim_open): Delete 3rd arg to sim_cpu_alloc_all.
2021-04-02 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4, configure: Regenerate.
2021-02-28 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2021-02-28 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_EXTRA_LIBDEPS): Delete.
2021-02-27 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_EXTRA_ALL): Delete.
2021-02-21 Mike Frysinger <vapier@gentoo.org>
* configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
* aclocal.m4, configure: Regenerate.
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
* aclocal.m4, configure: Regenerate.
2021-02-06 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2021-01-11 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2021-01-09 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2021-01-08 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2020-08-07 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* msp430-sim.c (sim_open): Increase the size of the main memory region
to 0xFAC0.
2020-08-05 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* msp430-sim.c (put_op): For unsigned multiplication, explicitly cast
operands to the unsigned type before multiplying.
* msp430-sim.h (struct msp430_cpu_state): Fix types used to store hwmult
operands.
2020-01-22 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* msp430-sim.c (msp430_step_once): Ignore the carry flag when executing
an RRC instruction, if the ZC bit of the extension word is set.
2017-09-06 John Baldwin <jhb@FreeBSD.org>
* configure: Regenerate.
2017-08-29 Jozef Lawrynowicz <jozef.l@somniumtech.com>
* sim/msp430/msp430-sim.c (maybe_perform_syscall): Fix passing of
arguments for variadic syscall "open".
2016-08-15 Mike Frysinger <vapier@gentoo.org>
* msp430-sim.c: Delete bfd.h include.
(lookup_symbol, msp430_sim_close): Delete.
(sim_open): Change lookup_symbol to trace_sym_value.
* sim-main.h (struct sim_state): Delete symbol_table and
number_of_symbols.
(STATE_SYMBOL_TABLE, STATE_NUM_SYMBOLS, msp430_sim_close,
SIM_CLOSE_HOOK): Delete.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure.ac (SIM_AC_OPTION_INLINE): Delete call.
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2016-01-09 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2016-01-06 Mike Frysinger <vapier@gentoo.org>
* msp430-sim.c (sim_open): Mark argv const.
(sim_create_inferior): Mark argv and env const.
2016-01-05 Mike Frysinger <vapier@gentoo.org>
* msp430-sim.c (loader_write_mem): Delete.
(lookup_symbol): Return -1 when abfd is NULL.
(sim_open): Delete prog_bfd variable. Delete call to sim_load_file.
Delete prog_bfd check.
2016-01-05 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete trace.o.
* msp430-sim.c: Delete dis-asm.h and trace.h includes.
(sim_open): Delete msp430_trace_init call.
(msp430_dis_read): Delete function.
(msp430_step_once): Replace disassembly logic with a call
to TRACE_DISASM.
* trace.c, trace.h: Delete files.
2016-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2016-01-02 Mike Frysinger <vapier@gentoo.org>
* configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
LITTLE.
* configure: Regenerate.
2015-12-27 Mike Frysinger <vapier@gentoo.org>
* msp430-sim.c (sim_dis_read): Change private_data to application_data.
(msp430_step_once): Likewise.
2015-12-27 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-hload.o.
2015-12-26 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2015-12-15 Dominik Vogt <vogt@linux.vnet.ibm.com>
* msp430-sim.c (get_op, put_op): Fix left shift of negative value.
2015-12-07 Nick Clifton <nickc@redhat.com>
* msp430-sim.c (sim_open): Check for needed memory at address
0x500 not 0x200.
(get_op): Add support for F5 hardware multiply addresses.
(put_op): Likewise.
2015-11-15 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-reason.o, sim-reg.o, and
sim-stop.o.
2015-11-14 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_close): Rename to ...
(msp430_sim_close): ... this. Delete call to sim_state_free.
* sim-main.h (msp430_sim_close): Declare.
(SIM_CLOSE_HOOK): Define.
2015-06-24 Mike Frysinger <vapier@gentoo.org>
* msp430-sim.c (trace_reg_put): Change TRACE_VPU to TRACE_REGISTER.
(trace_reg_get): Likewise.
2015-06-23 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2015-06-17 Mike Frysinger <vapier@gentoo.org>
* msp430-sim.c (maybe_perform_syscall): Replace call to cb_syscall
with sim_syscall.
2015-06-17 Mike Frysinger <vapier@gentoo.org>
* msp430-sim.c: Include sim-syscall.h.
(syscall_read_mem, syscall_write_mem): Delete.
(maybe_perform_syscall): Change syscall_read_mem/syscall_write_mem
to sim_syscall_read_mem/sim_syscall_write_mem.
2015-06-12 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2015-06-12 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2015-06-12 Mike Frysinger <vapier@gentoo.org>
* msp430-sim.c (trace_reg_put): Replace TRACE_VPU_P/trace_generic
with TRACE_VPU.
(trace_reg_get): Likewise.
(get_op): Replace TRACE_MEMORY_P/trace_generic with TRACE_MEMORY.
(put_op): Likewise.
(msp430_dis_read): Replace TRACE_ALU_P/trace_generic with TRACE_ALU.
(do_flags): Likewise.
(maybe_perform_syscall): Replace TRACE_SYSCALL_P/trace_generic with
TRACE_SYSCALL.
(msp430_step_once): Replace TRACE_ALU_P/trace_generic with TRACE_ALU.
Replace TRACE_BRANCH_P/trace_generic with TRACE_BRANCH.
2015-06-11 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (MAYBE_TRACE, TRACE_INSN, TRACE_DECODE, TRACE_EXTRACT,
TRACE_SYSCALL, TRACE_CORE, TRACE_EVENTS, TRACE_BRANCH,
trace_register, TRACE_REGISTER, TRACE_REG): Delete.
2015-04-18 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (SIM_CPU): Delete.
2015-04-18 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (sim_cia): Delete.
2015-04-17 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (CIA_GET, CIA_SET): Delete.
2015-04-15 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-cpu.o.
* sim-main.h (STATE_CPU): Delete.
2015-04-13 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2015-04-06 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
2015-04-01 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete $(SIM_EXTRA_OBJS).
2015-03-31 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2015-03-23 Mike Frysinger <vapier@gentoo.org>
* sim-main.h: Delete run-sim.h include.
2015-03-16 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2015-03-14 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4, configure: Regenerate.
* configure.ac: Call the common inline & warning macros.
* msp430-sim.c: Include unistd.h & trace.h.
* trace.c: Include trace.h.
(load_file_and_line): Move FILE* decl to top of scope.
* trace.h (msp430_get_current_source_location): Adjust prototype to
match the function definition.
2015-03-14 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_RUN_OBJS): Delete.
2015-02-24 Nick Clifton <nickc@redhat.com>
* msp430-sim.c (sim_open): Allocate memory regions matching those
declared in the libgloss/msp430 linker scripts.
Allow sim_load_file to fail.
(get_op): Test the correct address bit when checking for out of
range addresses.
Include the address in the error message when an illegal access to
the hardware multiplier is detected.
(put_op): Test the correct address bit when checking for out of
range addresses.
2014-08-19 Alan Modra <amodra@gmail.com>
* configure: Regenerate.
2014-08-19 Nick Clifton <nickc@redhat.com>
* msp430-sim.c: Move static hardware multiply support variables
from here...
* msp430-sim.h (msp430_cpu_state): ... into here ...
* msp430-sim.c (get_op, put_op): ... and update references to use
the msp430_cpu_state structure.
2014-08-15 Roland McGrath <mcgrathr@google.com>
* configure: Regenerate.
* config.in: Regenerate.
2014-06-03 Nick Clifton <nickc@redhat.com>
* msp430-sim.c (get_op): Handle reads of low result register when
in MAC mode.
(put_op): Copy MAC result into result words.
Handle writes to the low result register.
2014-05-12 DJ Delorie <dj@redhat.com>
* msp43-sim.c (sign_ext): Change to "long long" to support
sign-extending 32-bit values.
2014-05-08 Nick Clifton <nickc@redhat.com>
* msp430-sim.c (sim_open): Do not allocate memory over the
hardware multiply registers.
(get_op): Add support for reads from the hardware multiply
registers.
(put_op): Add support for writes to the hardware multiply
registers.
(msp430_step_once): Add support for the RETI instruction used by
the CPUX architecture.
2014-03-10 Mike Frysinger <vapier@gentoo.org>
* msp430-sim.c (sim_create_inferior): Set new_pc to the result of
bfd_get_start_address when abfd is not NULL and new_pc is zero.
2014-03-10 Mike Frysinger <vapier@gentoo.org>
* msp430-sim (maybe_perform_syscall): Change %d to %ld.
(msp430_step_once): Cast fprintf to fprintf_ftype.
2013-09-23 Alan Modra <amodra@gmail.com>
* aclocal.m4, configure: Regenerate.
2013-06-21 Nick Clifton <nickc@redhat.com>
* Makefile.in: New.
* aclocal.m4: Generate.
* config.in: Generate.
* configure.ac: New.
* configure: Generate.
* msp430-sim.c: New.
* msp430-sim.h: New.
* sim-main.h: New.
* trace.c: New.
* trace.h: New.