binutils-gdb/gdb/gdbserver/lynx-i386-low.c
Pedro Alves 3aee891821 [GDBserver] Multi-process + multi-arch
This patch makes GDBserver support multi-process + biarch.

Currently, if you're debugging more than one process at once with a
single gdbserver (in extended-remote mode), then all processes must
have the same architecture (e.g., 64-bit vs 32-bit).  Otherwise, you
see this:

Added inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
Reading symbols from /home/pedro/gdb/tests/main32...done.
Temporary breakpoint 2 at 0x4004cf: main. (2 locations)
Starting program: /home/pedro/gdb/tests/main32
warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64
warning: Architecture rejected target-supplied description
Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
... etc, etc ...

Even though the process was running a 32-bit program, GDBserver sent
back to GDB a register set in 64-bit layout.

A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a
while ago made GDB track a target_gdbarch per inferior, and as
consequence, fetch a target description per-inferior.  This patch is
the GDBserver counterpart, that makes GDBserver keep track of each
process'es XML target description and register layout.  So in the
example above, GDBserver will send the correct register set in 32-bit
layout to GDB.

A new "struct target_desc" object (tdesc for short) is added, that
holds the target description and register layout information about
each process.  Each `struct process_info' holds a pointer to a target
description.  The regcache also gains a pointer to a target
description, mainly for convenience, and parallel with GDB (and
possible future support for programs that flip processor modes).

The low target's arch_setup routines are responsible for setting the
process'es correct tdesc.  This isn't that much different to how
things were done before, except that instead of detecting the inferior
process'es architecture and calling the corresponding
init_registers_FOO routine, which would change the regcache layout
globals and recreate the threads' regcaches, the regcache.c globals
are gone, and the init_registers_$BAR routines now each initialize a
separate global struct target_desc object (one for each arch variant
GDBserver supports), and so all the init_registers_$BAR routines that
are built into GDBserver are called early at GDBserver startup time
(similarly to how GDB handles its built-in target descriptions), and
then the arch_setup routine is responsible for making
process_info->tdesc point to one of these target description globals.
The regcache module is all parameterized to get the regcache's layout
from the tdesc object instead of the old register_bytes, etc. globals.

The threads' regcaches are now created lazily.  The old scheme where
we created each of them when we added a new thread doesn't work
anymore, because we add the main thread/lwp before we see it stop for
the first time, and it is only when we see the thread stop for the
first time that we have a chance of determining the inferior's
architecture (through the_low_target.arch_setup).  Therefore when we
add the main thread we don't know which architecture/tdesc its
regcache should have.

This patch makes the gdb.multi/multi-arch.exp test now pass against
(extended-remote) GDBserver.  It currently fails, without this patch.

The IPA also uses the regcache, so it gains a new global struct
target_desc pointer, which points at the description of the process it
is loaded in.

Re. the linux-low.c & friends changes.  Since the register map
etc. may differ between processes (64-bit vs 32-bit) etc., the
linux_target_ops num_regs, regmap and regset_bitmap data fields are no
longer sufficient.  A new method is added in their place that returns
a pointer to a new struct that includes all info linux-low.c needs to
access registers of the current inferior.

The patch/discussion that originally introduced
linux-low.c:disabled_regsets mentions that the disabled_regsets set
may be different per mode (in a biarch setup), and indeed that is
cleared whenever we start a new (first) inferior, so that global is
moved as well behind the new `struct regs_info'.

On the x86 side:

I simply replaced the i387-fp.c:num_xmm_registers global with a check
for 64-bit or 32-bit process, which is equivalent to how the global
was set.  This avoided coming up with some more general mechanism that
would work for all targets that use this module (GNU/Linux, Windows,
etc.).

Tested:

  GNU/Linux IA64
  GNU/Linux MIPS64
  GNU/Linux PowerPC (Fedora 16)
  GNU/Linux s390x (Fedora 16)
  GNU/Linux sparc64 (Debian)
  GNU/Linux x86_64, -m64 and -m32 (Fedora 17)

Cross built, and smoke tested:

  i686-w64-mingw32, under Wine.
  GNU/Linux TI C6x, by Yao Qi.

Cross built but otherwise not tested:

  aarch64-linux-gnu
  arm-linux-gnu
  m68k-linux
  nios2-linux-gnu
  sh-linux-gnu
  spu
  tilegx-unknown-linux-gnu

Completely untested:

  GNU/Linux Blackfin
  GNU/Linux CRIS
  GNU/Linux CRISv32
  GNU/Linux TI Xtensa
  GNU/Linux M32R
  LynxOS
  QNX NTO

gdb/gdbserver/
2013-06-07  Pedro Alves  <palves@redhat.com>

	* Makefile.in (OBS): Add tdesc.o.
	(IPA_OBJS): Add tdesc-ipa.o.
	(tdesc-ipa.o): New rule.
	* ax.c (gdb_eval_agent_expr): Adjust register_size call to new
	interface.
	* linux-low.c (new_inferior): Delete.
	(disabled_regsets, num_regsets): Delete.
	(linux_add_process): Adjust to set the new per-process
	new_inferior flag.
	(linux_detach_one_lwp): Adjust to call regcache_invalidate_thread.
	(linux_wait_for_lwp): Adjust.  Only call arch_setup if the event
	was a stop.  When calling arch_setup, switch the current inferior
	to the thread that got an event.
	(linux_resume_one_lwp): Adjust to call regcache_invalidate_thread.
	(regsets_fetch_inferior_registers)
	(regsets_store_inferior_registers): New regsets_info parameter.
	Adjust to use it.
	(linux_register_in_regsets): New regs_info parameter.  Adjust to
	use it.
	(register_addr, fetch_register, store_register): New usrregs_info
	parameter.  Adjust to use it.
	(usr_fetch_inferior_registers, usr_store_inferior_registers): New
	parameter regs_info.  Adjust to use it.
	(linux_fetch_registers): Get the current inferior's regs_info, and
	adjust to use it.
	(linux_store_registers): Ditto.
	[HAVE_LINUX_REGSETS] (initialize_regsets_info): New.
	(initialize_low): Don't initialize the target_regsets here.  Call
	initialize_low_arch.
	* linux-low.h (target_regsets): Delete declaration.
	(struct regsets_info): New.
	(struct usrregs_info): New.
	(struct regs_info): New.
	(struct process_info_private) <new_inferior>: New field.
	(struct linux_target_ops): Delete the num_regs, regmap, and
	regset_bitmap fields.  New field regs_info.
	[HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare.
	* i387-fp.c (num_xmm_registers): Delete.
	(i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno
	calls to new interface.
	(i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache)
	(i387_xsave_to_cache): Adjust find_regno calls to new interface.
	Infer the number of xmm registers from the regcache's target
	description.
	* i387-fp.h (num_xmm_registers): Delete.
	* inferiors.c (add_thread): Don't install the thread's regcache
	here.
	* proc-service.c (gregset_info): Fetch the current inferior's
	regs_info.  Adjust to use it.
	* regcache.c: Include tdesc.h.
	(register_bytes, reg_defs, num_registers)
	(gdbserver_expedite_regs): Delete.
	(get_thread_regcache): If the thread doesn't have a regcache yet,
	create one, instead of aborting gdbserver.
	(regcache_invalidate_one): Rename to ...
	(regcache_invalidate_thread): ... this.
	(regcache_invalidate_one): New.
	(regcache_invalidate): Only invalidate registers of the current
	process.
	(init_register_cache): Add target_desc parameter, and use it.
	(new_register_cache): Ditto.  Assert the target description has a
	non zero registers_size.
	(regcache_cpy): Add assertions.  Adjust.
	(realloc_register_cache, set_register_cache): Delete.
	(registers_to_string, registers_from_string): Adjust.
	(find_register_by_name, find_regno, find_register_by_number)
	(register_cache_size): Add target_desc parameter, and use it.
	(free_register_cache_thread, free_register_cache_thread_one)
	(regcache_release, register_cache_size): New.
	(register_size): Add target_desc parameter, and use it.
	(register_data, supply_register, supply_register_zeroed)
	(supply_regblock, supply_register_by_name, collect_register)
	(collect_register_as_string, collect_register_by_name): Adjust.
	* regcache.h (struct target_desc): Forward declare.
	(struct regcache) <tdesc>: New field.
	(init_register_cache, new_register_cache): Add target_desc
	parameter.
	(regcache_invalidate_thread): Declare.
	(regcache_invalidate_one): Delete declaration.
	(regcache_release): Declare.
	(find_register_by_number, register_cache_size, register_size)
	(find_regno): Add target_desc parameter.
	(gdbserver_expedite_regs, gdbserver_xmltarget): Delete
	declarations.
	* remote-utils.c: Include tdesc.h.
	(outreg, prepare_resume_reply): Adjust.
	* server.c: Include tdesc.h.
	(gdbserver_xmltarget): Delete declaration.
	(get_features_xml, process_serial_event): Adjust.
	* server.h [IN_PROCESS_AGENT] (struct target_desc): Forward
	declare.
	(struct process_info) <tdesc>: New field.
	(ipa_tdesc): Declare.
	* tdesc.c: New file.
	* tdesc.h: New file.
	* tracepoint.c: Include tdesc.h.
	[IN_PROCESS_AGENT] (ipa_tdesc): Define.
	(get_context_regcache): Adjust to pass ipa_tdesc down.
	(do_action_at_tracepoint): Adjust to get the register cache size
	from the context regcache's description.
	(traceframe_walk_blocks): Adjust to get the register cache size
	from the current trace frame's description.
	(traceframe_get_pc): Adjust to get current trace frame's
	description and pass it down.
	(gdb_collect): Adjust to get the register cache size from the
	IPA's description.
	* linux-amd64-ipa.c (tdesc_amd64_linux): Declare.
	(gdbserver_xmltarget): Delete.
	(initialize_low_tracepoint): Set the ipa's target description.
	* linux-i386-ipa.c (tdesc_i386_linux): Declare.
	(initialize_low_tracepoint): Set the ipa's target description.
	* linux-x86-low.c: Include tdesc.h.
	[__x86_64__] (is_64bit_tdesc): New.
	(ps_get_thread_area, x86_get_thread_area): Use it.
	(i386_cannot_store_register): Rename to ...
	(x86_cannot_store_register): ... this.  Use is_64bit_tdesc.
	(i386_cannot_fetch_register): Rename to ...
	(x86_cannot_fetch_register): ... this.  Use is_64bit_tdesc.
	(x86_fill_gregset, x86_store_gregset): Adjust register_size calls
	to new interface.
	(target_regsets): Rename to ...
	(x86_regsets): ... this.
	(x86_get_pc, x86_set_pc): Adjust register_size calls to new
	interface.
	(x86_siginfo_fixup): Use is_64bit_tdesc.
	[__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux)
	(tdesc_x32_avx_linux, tdesc_x32_linux)
	(tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux):
	Declare.
	(x86_linux_update_xmltarget): Delete.
	(I386_LINUX_XSAVE_XCR0_OFFSET): Define.
	(have_ptrace_getfpxregs, have_ptrace_getregset): New.
	(AMD64_LINUX_USER64_CS): New.
	(x86_linux_read_description): New, based on
	x86_linux_update_xmltarget.
	(same_process_callback): New.
	(x86_arch_setup_process_callback): New.
	(x86_linux_update_xmltarget): New.
	(x86_regsets_info): New.
	(amd64_linux_regs_info): New.
	(i386_linux_usrregs_info): New.
	(i386_linux_regs_info): New.
	(x86_linux_regs_info): New.
	(x86_arch_setup): Reimplement.
	(x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc.
	(x86_emit_ops): Ditto.
	(the_low_target): Adjust.  Install x86_linux_regs_info,
	x86_cannot_fetch_register, and x86_cannot_store_register.
	(initialize_low_arch): New.
	* linux-ia64-low.c (tdesc_ia64): Declare.
	(ia64_fetch_register): Adjust.
	(ia64_usrregs_info, regs_info): New globals.
	(ia64_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-sparc-low.c (tdesc_sparc64): Declare.
	(sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack):
	Adjust.
	(sparc_arch_setup): New function.
	(sparc_regsets_info, sparc_usrregs_info, regs_info): New globals.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l)
	(tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l)
	(tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l)
	(tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l)
	(tdesc_powerpc_64l, tdesc_powerpc_altivec64l)
	(tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l)
	(tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l)
	(tdesc_powerpc_isa205_vsx64l): Declare.
	(ppc_cannot_store_register, ppc_collect_ptrace_register)
	(ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc)
	(ppc_set_pc, ppc_get_hwcap): Adjust.
	(ppc_usrregs_info): Forward declare.
	(!__powerpc64__) ppc_regmap_adjusted: New global.
	(ppc_arch_setup): Adjust to the current process'es target
	description.
	(ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset)
	(ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse)
	(ppc_store_evrregset): Adjust.
	(target_regsets): Rename to ...
	(ppc_regsets): ... this, and make static.
	(ppc_usrregs_info, ppc_regsets_info, regs_info): New globals.
	(ppc_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1)
	(tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1)
	(tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1)
	(tdesc_s390x_linux64v2): Declare.
	(s390_collect_ptrace_register, s390_supply_ptrace_register)
	(s390_fill_gregset, s390_store_last_break): Adjust.
	(target_regsets): Rename to ...
	(s390_regsets): ... this, and make static.
	(s390_get_pc, s390_set_pc): Adjust.
	(s390_get_hwcap): New target_desc parameter, and use it.
	[__s390x__] (have_hwcap_s390_high_gprs): New global.
	(s390_arch_setup): Adjust to set the current process'es target
	description.  Don't adjust the regmap.
	(s390_usrregs_info, s390_regsets_info, regs_info): New globals.
	[__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264)
	(regs_info_3264): New globals.
	(s390_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux)
	(tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare.
	[__mips64] (init_registers_mips_linux)
	(init_registers_mips_dsp_linux): Delete defines.
	[__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines.
	(have_dsp): New global.
	(mips_read_description): New, based on mips_arch_setup.
	(mips_arch_setup): Reimplement.
	(get_usrregs_info): New function.
	(mips_cannot_fetch_register, mips_cannot_store_register)
	(mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset)
	(mips_fill_fpregset, mips_store_fpregset): Adjust.
	(target_regsets): Rename to ...
	(mips_regsets): ... this, and make static.
	(mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info)
	(dsp_regs_info, regs_info): New globals.
	(mips_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt)
	(tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon):
	Declare.
	(arm_fill_vfpregset, arm_store_vfpregset): Adjust.
	(arm_read_description): New, with bits factored from
	arm_arch_setup.
	(arm_arch_setup): Reimplement.
	(target_regsets): Rename to ...
	(arm_regsets): ... this, and make static.
	(arm_regsets_info, arm_usrregs_info, regs_info): New globals.
	(arm_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-m68k-low.c (tdesc_m68k): Declare.
	(target_regsets): Rename to ...
	(m68k_regsets): ... this, and make static.
	(m68k_regsets_info, m68k_usrregs_info, regs_info): New globals.
	(m68k_regs_info): New function.
	(m68k_arch_setup): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-sh-low.c (tdesc_sharch): Declare.
	(target_regsets): Rename to ...
	(sh_regsets): ... this, and make static.
	(sh_regsets_info, sh_usrregs_info, regs_info): New globals.
	(sh_regs_info, sh_arch_setup): New functions.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-bfin-low.c (tdesc_bfin): Declare.
	(bfin_arch_setup): New function.
	(bfin_usrregs_info, regs_info): New globals.
	(bfin_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-cris-low.c (tdesc_cris): Declare.
	(cris_arch_setup): New function.
	(cris_usrregs_info, regs_info): New globals.
	(cris_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-cris-low.c (tdesc_crisv32): Declare.
	(cris_arch_setup): New function.
	(cris_regsets_info, cris_usrregs_info, regs_info): New globals.
	(cris_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-m32r-low.c (tdesc_m32r): Declare.
	(m32r_arch_setup): New function.
	(m32r_usrregs_info, regs_info): New globals.
	(m32r_regs_info): Adjust.
	(initialize_low_arch): New function.
	* linux-tic6x-low.c (tdesc_tic6x_c64xp_linux)
	(tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare.
	(tic6x_usrregs_info): Forward declare.
	(tic6x_read_description): New function, based on ...
	(tic6x_arch_setup): ... this.  Reimplement.
	(target_regsets): Rename to ...
	(tic6x_regsets): ... this, and make static.
	(tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals.
	(tic6x_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-xtensa-low.c (tdesc_xtensa): Declare.
	(xtensa_fill_gregset, xtensa_store_gregset): Adjust.
	(target_regsets): Rename to ...
	(xtensa_regsets): ... this, and make static.
	(xtensa_regsets_info, xtensa_usrregs_info, regs_info): New
	globals.
	(xtensa_arch_setup, xtensa_regs_info): New functions.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-nios2-low.c (tdesc_nios2_linux): Declare.
	(nios2_arch_setup): Set the current process'es tdesc.
	(target_regsets): Rename to ...
	(nios2_regsets): ... this.
	(nios2_regsets_info, nios2_usrregs_info, regs_info): New globals.
	(nios2_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
        * linux-aarch64-low.c (tdesc_aarch64): Declare.
        (aarch64_arch_setup): Set the current process'es tdesc.
        (target_regsets): Rename to ...
        (aarch64_regsets): ... this.
        (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals.
        (aarch64_regs_info): New function.
        (the_low_target): Adjust.
        (initialize_low_arch): New function.
	* linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare
	globals.
	(target_regsets): Rename to ...
	(tile_regsets): ... this.
	(tile_regsets_info, tile_usrregs_info, regs_info): New globals.
	(tile_regs_info): New function.
	(tile_arch_setup): Set the current process'es tdesc.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* spu-low.c (tdesc_spu): Declare.
	(spu_create_inferior, spu_attach): Set the new process'es tdesc.
	* win32-arm-low.c (tdesc_arm): Declare.
	(arm_arch_setup): New function.
	(the_low_target): Install arm_arch_setup instead of
	init_registers_arm.
	* win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare.
	(init_windows_x86): Rename to ...
	(i386_arch_setup): ... this.  Set `win32_tdesc'.
	(the_low_target): Adjust.
	* win32-low.c (win32_tdesc): New global.
	(child_add_thread): Don't create the thread cache here.
	(do_initial_child_stuff): Set the new process'es tdesc.
	* win32-low.h (struct target_desc): Forward declare.
	(win32_tdesc): Declare.
	* lynx-i386-low.c (tdesc_i386): Declare global.
	(lynx_i386_arch_setup): Set `lynx_tdesc'.
	* lynx-low.c (lynx_tdesc): New global.
	(lynx_add_process): Set the new process'es tdesc.
	* lynx-low.h (struct target_desc): Forward declare.
	(lynx_tdesc): Declare global.
	* lynx-ppc-low.c (tdesc_powerpc_32): Declare global.
	(lynx_ppc_arch_setup): Set `lynx_tdesc'.
	* nto-low.c (nto_tdesc): New global.
	(do_attach): Set the new process'es tdesc.
	* nto-low.h (struct target_desc): Forward declare.
	(nto_tdesc): Declare.
	* nto-x86-low.c (tdesc_i386): Declare.
	(nto_x86_arch_setup): Set `nto_tdesc'.

gdb/
2013-06-07  Pedro Alves  <palves@redhat.com>

	* regformats/regdat.sh: Output #include tdesc.h.  Make globals
	static.  Output a global target description pointer.
	(init_registers_${name}): Adjust to initialize a
	target description structure.
2013-06-07 10:46:59 +00:00

322 lines
11 KiB
C

/* Copyright (C) 2010-2013 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "server.h"
#include "lynx-low.h"
#include <stdint.h>
#include <limits.h>
#include <sys/ptrace.h>
/* The following two typedefs are defined in a .h file which is not
in the standard include path (/sys/include/family/x86/ucontext.h),
so we just duplicate them here. */
/* General register context */
typedef struct usr_econtext {
uint32_t uec_fault;
uint32_t uec_es;
uint32_t uec_ds;
uint32_t uec_edi;
uint32_t uec_esi;
uint32_t uec_ebp;
uint32_t uec_temp;
uint32_t uec_ebx;
uint32_t uec_edx;
uint32_t uec_ecx;
uint32_t uec_eax;
uint32_t uec_inum;
uint32_t uec_ecode;
uint32_t uec_eip;
uint32_t uec_cs;
uint32_t uec_eflags;
uint32_t uec_esp;
uint32_t uec_ss;
uint32_t uec_fs;
uint32_t uec_gs;
} usr_econtext_t;
/* Floating point and SIMD register context */
typedef struct usr_fcontext {
uint16_t ufc_control;
uint16_t ufc_status;
uint16_t ufc_tag;
uint16_t ufc_opcode;
uint8_t *ufc_inst_off;
uint32_t ufc_inst_sel;
uint8_t *ufc_data_off;
uint32_t ufc_data_sel;
uint32_t usse_mxcsr;
uint32_t usse_mxcsr_mask;
struct ufp387_real {
uint16_t umant4;
uint16_t umant3;
uint16_t umant2;
uint16_t umant1;
uint16_t us_and_e;
uint16_t ureserved_1;
uint16_t ureserved_2;
uint16_t ureserved_3;
} ufc_reg[8];
struct uxmm_register {
uint16_t uchunk_1;
uint16_t uchunk_2;
uint16_t uchunk_3;
uint16_t uchunk_4;
uint16_t uchunk_5;
uint16_t uchunk_6;
uint16_t uchunk_7;
uint16_t uchunk_8;
} uxmm_reg[8];
char ureserved[16][14];
} usr_fcontext_t;
/* The index of various registers inside the regcache. */
enum lynx_i386_gdb_regnum
{
I386_EAX_REGNUM,
I386_ECX_REGNUM,
I386_EDX_REGNUM,
I386_EBX_REGNUM,
I386_ESP_REGNUM,
I386_EBP_REGNUM,
I386_ESI_REGNUM,
I386_EDI_REGNUM,
I386_EIP_REGNUM,
I386_EFLAGS_REGNUM,
I386_CS_REGNUM,
I386_SS_REGNUM,
I386_DS_REGNUM,
I386_ES_REGNUM,
I386_FS_REGNUM,
I386_GS_REGNUM,
I386_ST0_REGNUM,
I386_FCTRL_REGNUM = I386_ST0_REGNUM + 8,
I386_FSTAT_REGNUM,
I386_FTAG_REGNUM,
I386_FISEG_REGNUM,
I386_FIOFF_REGNUM,
I386_FOSEG_REGNUM,
I386_FOOFF_REGNUM,
I386_FOP_REGNUM,
I386_XMM0_REGNUM = 32,
I386_MXCSR_REGNUM = I386_XMM0_REGNUM + 8,
I386_SENTINEL_REGUM
};
/* Defined in auto-generated file i386.c. */
extern void init_registers_i386 (void);
extern const struct target_desc *tdesc_i386;
/* The fill_function for the general-purpose register set. */
static void
lynx_i386_fill_gregset (struct regcache *regcache, char *buf)
{
#define lynx_i386_collect_gp(regnum, fld) \
collect_register (regcache, regnum, \
buf + offsetof (usr_econtext_t, uec_##fld))
lynx_i386_collect_gp (I386_EAX_REGNUM, eax);
lynx_i386_collect_gp (I386_ECX_REGNUM, ecx);
lynx_i386_collect_gp (I386_EDX_REGNUM, edx);
lynx_i386_collect_gp (I386_EBX_REGNUM, ebx);
lynx_i386_collect_gp (I386_ESP_REGNUM, esp);
lynx_i386_collect_gp (I386_EBP_REGNUM, ebp);
lynx_i386_collect_gp (I386_ESI_REGNUM, esi);
lynx_i386_collect_gp (I386_EDI_REGNUM, edi);
lynx_i386_collect_gp (I386_EIP_REGNUM, eip);
lynx_i386_collect_gp (I386_EFLAGS_REGNUM, eflags);
lynx_i386_collect_gp (I386_CS_REGNUM, cs);
lynx_i386_collect_gp (I386_SS_REGNUM, ss);
lynx_i386_collect_gp (I386_DS_REGNUM, ds);
lynx_i386_collect_gp (I386_ES_REGNUM, es);
lynx_i386_collect_gp (I386_FS_REGNUM, fs);
lynx_i386_collect_gp (I386_GS_REGNUM, gs);
}
/* The store_function for the general-purpose register set. */
static void
lynx_i386_store_gregset (struct regcache *regcache, const char *buf)
{
#define lynx_i386_supply_gp(regnum, fld) \
supply_register (regcache, regnum, \
buf + offsetof (usr_econtext_t, uec_##fld))
lynx_i386_supply_gp (I386_EAX_REGNUM, eax);
lynx_i386_supply_gp (I386_ECX_REGNUM, ecx);
lynx_i386_supply_gp (I386_EDX_REGNUM, edx);
lynx_i386_supply_gp (I386_EBX_REGNUM, ebx);
lynx_i386_supply_gp (I386_ESP_REGNUM, esp);
lynx_i386_supply_gp (I386_EBP_REGNUM, ebp);
lynx_i386_supply_gp (I386_ESI_REGNUM, esi);
lynx_i386_supply_gp (I386_EDI_REGNUM, edi);
lynx_i386_supply_gp (I386_EIP_REGNUM, eip);
lynx_i386_supply_gp (I386_EFLAGS_REGNUM, eflags);
lynx_i386_supply_gp (I386_CS_REGNUM, cs);
lynx_i386_supply_gp (I386_SS_REGNUM, ss);
lynx_i386_supply_gp (I386_DS_REGNUM, ds);
lynx_i386_supply_gp (I386_ES_REGNUM, es);
lynx_i386_supply_gp (I386_FS_REGNUM, fs);
lynx_i386_supply_gp (I386_GS_REGNUM, gs);
}
/* Extract the first 16 bits of register REGNUM in the REGCACHE,
and store these 2 bytes at DEST.
This is useful to collect certain 16bit registers which are known
by GDBserver as 32bit registers (such as the Control Register
for instance). */
static void
collect_16bit_register (struct regcache *regcache, int regnum, char *dest)
{
gdb_byte word[4];
collect_register (regcache, regnum, word);
memcpy (dest, word, 2);
}
/* The fill_function for the floating-point register set. */
static void
lynx_i386_fill_fpregset (struct regcache *regcache, char *buf)
{
int i;
/* Collect %st0 .. %st7. */
for (i = 0; i < 8; i++)
collect_register (regcache, I386_ST0_REGNUM + i,
buf + offsetof (usr_fcontext_t, ufc_reg)
+ i * sizeof (struct ufp387_real));
/* Collect the other FPU registers. */
collect_16bit_register (regcache, I386_FCTRL_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_control));
collect_16bit_register (regcache, I386_FSTAT_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_status));
collect_16bit_register (regcache, I386_FTAG_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_tag));
collect_register (regcache, I386_FISEG_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_inst_sel));
collect_register (regcache, I386_FIOFF_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_inst_off));
collect_register (regcache, I386_FOSEG_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_data_sel));
collect_register (regcache, I386_FOOFF_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_data_off));
collect_16bit_register (regcache, I386_FOP_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_opcode));
/* Collect the XMM registers. */
for (i = 0; i < 8; i++)
collect_register (regcache, I386_XMM0_REGNUM + i,
buf + offsetof (usr_fcontext_t, uxmm_reg)
+ i * sizeof (struct uxmm_register));
collect_register (regcache, I386_MXCSR_REGNUM,
buf + offsetof (usr_fcontext_t, usse_mxcsr));
}
/* This is the supply counterpart for collect_16bit_register:
It extracts a 2byte value from BUF, and uses that value to
set REGNUM's value in the regcache.
This is useful to supply the value of certain 16bit registers
which are known by GDBserver as 32bit registers (such as the Control
Register for instance). */
static void
supply_16bit_register (struct regcache *regcache, int regnum, const char *buf)
{
gdb_byte word[4];
memcpy (word, buf, 2);
memset (word + 2, 0, 2);
supply_register (regcache, regnum, word);
}
/* The store_function for the floating-point register set. */
static void
lynx_i386_store_fpregset (struct regcache *regcache, const char *buf)
{
int i;
/* Store the %st0 .. %st7 registers. */
for (i = 0; i < 8; i++)
supply_register (regcache, I386_ST0_REGNUM + i,
buf + offsetof (usr_fcontext_t, ufc_reg)
+ i * sizeof (struct ufp387_real));
/* Store the other FPU registers. */
supply_16bit_register (regcache, I386_FCTRL_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_control));
supply_16bit_register (regcache, I386_FSTAT_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_status));
supply_16bit_register (regcache, I386_FTAG_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_tag));
supply_register (regcache, I386_FISEG_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_inst_sel));
supply_register (regcache, I386_FIOFF_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_inst_off));
supply_register (regcache, I386_FOSEG_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_data_sel));
supply_register (regcache, I386_FOOFF_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_data_off));
supply_16bit_register (regcache, I386_FOP_REGNUM,
buf + offsetof (usr_fcontext_t, ufc_opcode));
/* Store the XMM registers. */
for (i = 0; i < 8; i++)
supply_register (regcache, I386_XMM0_REGNUM + i,
buf + offsetof (usr_fcontext_t, uxmm_reg)
+ i * sizeof (struct uxmm_register));
supply_register (regcache, I386_MXCSR_REGNUM,
buf + offsetof (usr_fcontext_t, usse_mxcsr));
}
/* Implements the lynx_target_ops.arch_setup routine. */
static void
lynx_i386_arch_setup (void)
{
init_registers_i386 ();
lynx_tdesc = tdesc_i386;
}
/* Description of all the x86-lynx register sets. */
struct lynx_regset_info lynx_target_regsets[] = {
/* General Purpose Registers. */
{PTRACE_GETREGS, PTRACE_SETREGS, sizeof(usr_econtext_t),
lynx_i386_fill_gregset, lynx_i386_store_gregset},
/* Floating Point Registers. */
{ PTRACE_GETFPREGS, PTRACE_SETFPREGS, sizeof(usr_fcontext_t),
lynx_i386_fill_fpregset, lynx_i386_store_fpregset },
/* End of list marker. */
{0, 0, -1, NULL, NULL }
};
/* The lynx_target_ops vector for x86-lynx. */
struct lynx_target_ops the_low_target = {
lynx_i386_arch_setup,
};