mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-11 11:23:35 +08:00
8f595e9b4f
1. Remove the -mriscv-isa-version and --with-riscv-isa-version options.
We can still use -march to choose the version for each extensions, so there is
no need to add these.
2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...].
Unlike the architecture string has specified by spec, ther is no need to do
the same thing for options.
3. Spilt the patches to reduce the burdens of review.
[PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions
to
[PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions
[PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default.
[PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version.
to
[PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version.
[PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version.
4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c.
The behavior is same as comparing the choosen privilege spec.
include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean.
(enum riscv_isa_spec_class): New enum class. All supported ISA spec
belong to one of the class
(struct riscv_ext_version): New structure holds version information
for the specific ISA.
* opcode/riscv-opc.h (DECLARE_CSR): There are two version information,
define_version and abort_version. The define_version means which
privilege spec is started to define the CSR, and the abort_version
means which privilege spec is started to abort the CSR. If the CSR is
valid for the newest spec, then the abort_version should be
PRIV_SPEC_CLASS_DRAFT.
(DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR.
* opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define
the current supported privilege spec versions.
(struct riscv_csr_extra): Add new fields to store more information
about the CSR. We use these information to find the suitable CSR
address when user choosing a specific privilege spec.
binutils * dwarf.c: Updated since DECLARE_CSR is changed.
opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store
all information about the supported spec and the corresponding ISA
versions. Currently, only Zicsr is supported to verify the
correctness of Z sub extension settings. Others will be supported
in the future patches.
(struct isa_spec_t, isa_specs): List for all supported ISA spec
classes and the corresponding strings.
(riscv_get_isa_spec_class): New function. Get the corresponding ISA
spec class by giving a ISA spec string.
* riscv-opc.c (struct priv_spec_t): New structure.
(struct priv_spec_t priv_specs): List for all supported privilege spec
classes and the corresponding strings.
(riscv_get_priv_spec_class): New function. Get the corresponding
privilege spec class by giving a spec string.
(riscv_get_priv_spec_name): New function. Get the corresponding
privilege spec string by giving a CSR version class.
* riscv-dis.c: Updated since DECLARE_CSR is changed.
* riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR
according to the chosen version. Build a hash table riscv_csr_hash to
store the valid CSR for the chosen pirv verison. Dump the direct
CSR address rather than it's name if it is invalid.
(parse_riscv_dis_option_without_args): New function. Parse the options
without arguments.
(parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to
parse the options without arguments first, and then handle the options
with arguments. Add the new option -Mpriv-spec, which has argument.
* riscv-dis.c (print_riscv_disassembler_options): Add description
about the new OBJDUMP option.
ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated
priv attributes according to the -mpriv-spec option.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function
get_default_version. It is used to find the default version for
the specific extension.
* elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters
default_major_version and default_minor_version. Add new bfd_boolean
parameter *use_default_version. Set it to TRUE if we need to call
the callback rps->get_default_version to find the default version.
(riscv_parse_std_ext): Call rps->get_default_version if we fail to find
the default version in riscv_parsing_subset_version, and then call
riscv_add_subset to add the subset into subset list.
(riscv_parse_prefixed_ext): Likewise.
(riscv_std_z_ext_strtab): Support Zicsr extensions.
* elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the
strings rather than characters.
riscv_merge_arch_attr_info): The callback function get_default_version
is only needed for assembler, so set it to NULL int the linker.
* elfxx-riscv.c (riscv_estimate_digit): Remove the static.
* elfxx-riscv.h: Updated.
gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated.
* config/tc-riscv.c (default_arch_with_ext, default_isa_spec):
Static variables which are used to set the ISA extensions. You can
use -march (or ELF build attributes) and -misa-spec to set them,
respectively.
(ext_version_hash): The hash table used to handle the extensions
with versions.
(init_ext_version_hash): Initialize the ext_version_hash according
to riscv_ext_version_table.
(riscv_get_default_ext_version): The callback function of
riscv_parse_subset_t. According to the choosed ISA spec,
get the default version for the specific extension.
(riscv_set_arch): Set the callback function.
(enum options, struct option md_longopts): Add new option -misa-spec.
(md_parse_option): Do not call riscv_set_arch for -march. We will
call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class
to set default_isa_spec class.
(riscv_after_parse_args): Call init_ext_version_hash to initialize the
ext_version_hash, and then call riscv_set_arch to set the architecture
with versions according to default_arch_with_ext.
* testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for
x extensions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we
already set it's version to 2p1 by march, so no need to use the default
2p2 version. For m-ext, we do not set the version by -march and ELF arch
attribute, so set the default 2p0 to it. For zicsr, it is not defined in
ISA spec 2p2, so set 0p0 to it.
* testsuite/gas/riscv/attribute-10.d: New testcase. The version of
zicsr is 2p0 according to ISA spec 20191213.
* config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT)
(DEFAULT_RISCV_ISA_SPEC): Default configure option settings.
You can set them by configure options --with-arch and
--with-isa-spec, respectively.
(riscv_set_default_isa_spec): New function used to set the
default ISA spec.
(md_parse_option): Call riscv_set_default_isa_spec rather than
call riscv_get_isa_spec_class directly.
(riscv_after_parse_args): If the -isa-spec is not set, then we
set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by
calling riscv_set_default_isa_spec.
* testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since
the --with-isa-spec may be set to different ISA spec.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* configure.ac: Add configure options, --with-arch and
--with-isa-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (default_priv_spec): Static variable which is
used to check if the CSR is valid for the chosen privilege spec. You
can use -mpriv-spec to set it.
(enum reg_class): We now get the CSR address from csr_extra_hash rather
than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX.
(riscv_init_csr_hashes): Only need to initialize one hash table
csr_extra_hash.
(riscv_csr_class_check): Change the return type to void. Don't check
the ISA dependency if -mcsr-check isn't set.
(riscv_csr_version_check): New function. Check and find the CSR address
from csr_extra_hash, according to default_priv_spec. Report warning
for the invalid CSR if -mcsr-check is set.
(reg_csr_lookup_internal): Updated.
(reg_lookup_internal): Likewise.
(md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed.
(enum options, struct option md_longopts): Add new GAS option -mpriv-spec.
(md_parse_option): Call riscv_set_default_priv_version to set
default_priv_spec.
(riscv_after_parse_args): If -mpriv-spec isn't set, then set the default
privilege spec to the newest one.
(enum riscv_csr_class, struct riscv_csr_extra): Move them to
include/opcode/riscv.h.
* testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want
to check the ISA dependency for CSR, so fix the spec version by adding
-mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some
version warnings for the test case.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case.
Check whether the CSR is valid when privilege version 1.9 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case.
Check whether the CSR is valid when privilege version 1.9.1 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case.
Check whether the CSR is valid when privilege version 1.10 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case.
Check whether the CSR is valid when privilege version 1.11 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option
setting. You can set it by configure option --with-priv-spec.
(riscv_set_default_priv_spec): New function used to set the default
privilege spec.
(md_parse_option): Call riscv_set_default_priv_spec rather than
call riscv_get_priv_spec_class directly.
(riscv_after_parse_args): If -mpriv-spec isn't set, then we set the
default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by
calling riscv_set_default_priv_spec.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since
the --with-priv-spec may be set to different privilege spec.
* testsuite/gas/riscv/priv-reg.d: Likewise.
* configure.ac: Add configure option --with-priv-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to
explicit_attr. Set it to TRUE if any ELF attribute is found.
(riscv_set_default_priv_spec): Try to set the default_priv_spec if
the priv attributes are set.
(md_assemble): Set the default_priv_spec according to the priv
attributes when we start to assemble instruction.
(riscv_write_out_attrs): Rename riscv_write_out_arch_attr to
riscv_write_out_attrs. Update the arch and priv attributes. If we
don't set the corresponding ELF attributes, then try to output the
default ones.
(riscv_set_public_attributes): If any ELF attribute or -march-attr
options is set (explicit_attr is TRUE), then call riscv_write_out_attrs
to update the arch and priv attributes.
(s_riscv_attribute): Make sure all arch and priv attributes are set
before any instruction.
* testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any
ELF attribute or -march-attr is set. If the priv attributes are not
set, then try to update them by the default setting (-mpriv-spec or
--with-priv-spec).
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec
set by priv attributes must be supported.
* testsuite/gas/riscv/attribute-05.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated
priv attributes according to the -mpriv-spec option.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg.d: Removed.
* testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the
CSR according to the priv spec 1.9.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the
CSR according to the priv spec 1.9.1.
* testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the
CSR according to the priv spec 1.10.
* testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the
CSR according to the priv spec 1.11.
* config/tc-riscv.c (md_show_usage): Add descriptions about
the new GAS options.
* doc/c-riscv.texi: Likewise.
426 lines
11 KiB
Plaintext
426 lines
11 KiB
Plaintext
/* config.in. Generated from configure.ac by autoheader. */
|
|
|
|
/* Check that config.h is #included before system headers
|
|
(this works only for glibc, but that should be enough). */
|
|
#if defined(__GLIBC__) && !defined(__FreeBSD_kernel__) && !defined(__CONFIG_H__)
|
|
# error config.h must be #included before system headers
|
|
#endif
|
|
#define __CONFIG_H__ 1
|
|
|
|
/* Define if building universal (internal helper macro) */
|
|
#undef AC_APPLE_UNIVERSAL_BUILD
|
|
|
|
/* Define if using AIX 5.2 value for C_WEAKEXT. */
|
|
#undef AIX_WEAK_SUPPORT
|
|
|
|
/* assert broken? */
|
|
#undef BROKEN_ASSERT
|
|
|
|
/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP
|
|
systems. This function is required for `alloca.c' support on those systems.
|
|
*/
|
|
#undef CRAY_STACKSEG_END
|
|
|
|
/* Compiling cross-assembler? */
|
|
#undef CROSS_COMPILE
|
|
|
|
/* Define to 1 if using `alloca.c'. */
|
|
#undef C_ALLOCA
|
|
|
|
/* Default architecture. */
|
|
#undef DEFAULT_ARCH
|
|
|
|
/* Default CRIS architecture. */
|
|
#undef DEFAULT_CRIS_ARCH
|
|
|
|
/* Default emulation. */
|
|
#undef DEFAULT_EMULATION
|
|
|
|
/* Define if you want compressed debug sections by default. */
|
|
#undef DEFAULT_FLAG_COMPRESS_DEBUG
|
|
|
|
/* Define to 1 if you want to generate GNU Build attribute notes by default,
|
|
if none are contained in the input. */
|
|
#undef DEFAULT_GENERATE_BUILD_NOTES
|
|
|
|
/* Define to 1 if you want to generate ELF common symbols with the STT_COMMON
|
|
type by default. */
|
|
#undef DEFAULT_GENERATE_ELF_STT_COMMON
|
|
|
|
/* Define to 1 if you want to generate x86 relax relocations by default. */
|
|
#undef DEFAULT_GENERATE_X86_RELAX_RELOCATIONS
|
|
|
|
/* Define to 1 if you want to fix Loongson3 LLSC Errata by default. */
|
|
#undef DEFAULT_MIPS_FIX_LOONGSON3_LLSC
|
|
|
|
/* Define default value for RISC-V -march. */
|
|
#undef DEFAULT_RISCV_ARCH_WITH_EXT
|
|
|
|
/* Define to 1 if you want to generate RISC-V arch attribute by default. */
|
|
#undef DEFAULT_RISCV_ATTR
|
|
|
|
/* Define default value for RISC-V -misa-spec. */
|
|
#undef DEFAULT_RISCV_ISA_SPEC
|
|
|
|
/* Define default value for RISC-V -mpriv-spec */
|
|
#undef DEFAULT_RISCV_PRIV_SPEC
|
|
|
|
/* Define to 1 if you want to generate GNU x86 used ISA and feature properties
|
|
by default. */
|
|
#undef DEFAULT_X86_USED_NOTE
|
|
|
|
/* Supported emulations. */
|
|
#undef EMULATIONS
|
|
|
|
/* Define if you want run-time sanity checks. */
|
|
#undef ENABLE_CHECKING
|
|
|
|
/* Define to 1 if translation of program messages to the user's native
|
|
language is requested. */
|
|
#undef ENABLE_NLS
|
|
|
|
/* Define to 1 if you have `alloca', as a function or macro. */
|
|
#undef HAVE_ALLOCA
|
|
|
|
/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
|
|
*/
|
|
#undef HAVE_ALLOCA_H
|
|
|
|
/* Define to 1 if you have the declaration of `asprintf', and to 0 if you
|
|
don't. */
|
|
#undef HAVE_DECL_ASPRINTF
|
|
|
|
/* Define to 1 if you have the declaration of `free', and to 0 if you don't.
|
|
*/
|
|
#undef HAVE_DECL_FREE
|
|
|
|
/* Define to 1 if you have the declaration of `getenv', and to 0 if you don't.
|
|
*/
|
|
#undef HAVE_DECL_GETENV
|
|
|
|
/* Is the prototype for getopt in <unistd.h> in the expected format? */
|
|
#undef HAVE_DECL_GETOPT
|
|
|
|
/* Define to 1 if you have the declaration of `malloc', and to 0 if you don't.
|
|
*/
|
|
#undef HAVE_DECL_MALLOC
|
|
|
|
/* Define to 1 if you have the declaration of `mempcpy', and to 0 if you
|
|
don't. */
|
|
#undef HAVE_DECL_MEMPCPY
|
|
|
|
/* Define to 1 if you have the declaration of `realloc', and to 0 if you
|
|
don't. */
|
|
#undef HAVE_DECL_REALLOC
|
|
|
|
/* Define to 1 if you have the declaration of `stpcpy', and to 0 if you don't.
|
|
*/
|
|
#undef HAVE_DECL_STPCPY
|
|
|
|
/* Define to 1 if you have the declaration of `strstr', and to 0 if you don't.
|
|
*/
|
|
#undef HAVE_DECL_STRSTR
|
|
|
|
/* Define to 1 if you have the declaration of `vsnprintf', and to 0 if you
|
|
don't. */
|
|
#undef HAVE_DECL_VSNPRINTF
|
|
|
|
/* Define to 1 if you have the <dlfcn.h> header file. */
|
|
#undef HAVE_DLFCN_H
|
|
|
|
/* Define to 1 if you have the <errno.h> header file. */
|
|
#undef HAVE_ERRNO_H
|
|
|
|
/* Define to 1 if you have the <inttypes.h> header file. */
|
|
#undef HAVE_INTTYPES_H
|
|
|
|
/* Define if your <locale.h> file defines LC_MESSAGES. */
|
|
#undef HAVE_LC_MESSAGES
|
|
|
|
/* Define to 1 if you have the <limits.h> header file. */
|
|
#undef HAVE_LIMITS_H
|
|
|
|
/* Define to 1 if you have the <locale.h> header file. */
|
|
#undef HAVE_LOCALE_H
|
|
|
|
/* Define to 1 if you have the <memory.h> header file. */
|
|
#undef HAVE_MEMORY_H
|
|
|
|
/* Define to 1 if you have the `remove' function. */
|
|
#undef HAVE_REMOVE
|
|
|
|
/* Define to 1 if you have the `sbrk' function. */
|
|
#undef HAVE_SBRK
|
|
|
|
/* Define to 1 if you have the `setlocale' function. */
|
|
#undef HAVE_SETLOCALE
|
|
|
|
/* Define to 1 if you have the <stdint.h> header file. */
|
|
#undef HAVE_STDINT_H
|
|
|
|
/* Define to 1 if you have the <stdlib.h> header file. */
|
|
#undef HAVE_STDLIB_H
|
|
|
|
/* Define to 1 if you have the <strings.h> header file. */
|
|
#undef HAVE_STRINGS_H
|
|
|
|
/* Define to 1 if you have the <string.h> header file. */
|
|
#undef HAVE_STRING_H
|
|
|
|
/* Define to 1 if you have the `strsignal' function. */
|
|
#undef HAVE_STRSIGNAL
|
|
|
|
/* Define if <sys/stat.h> has struct stat.st_mtim.tv_nsec */
|
|
#undef HAVE_ST_MTIM_TV_NSEC
|
|
|
|
/* Define if <sys/stat.h> has struct stat.st_mtim.tv_sec */
|
|
#undef HAVE_ST_MTIM_TV_SEC
|
|
|
|
/* Define to 1 if you have the <sys/stat.h> header file. */
|
|
#undef HAVE_SYS_STAT_H
|
|
|
|
/* Define to 1 if you have the <sys/types.h> header file. */
|
|
#undef HAVE_SYS_TYPES_H
|
|
|
|
/* Define to 1 if you have the <time.h> header file. */
|
|
#undef HAVE_TIME_H
|
|
|
|
/* Define if <time.h> has struct tm.tm_gmtoff. */
|
|
#undef HAVE_TM_GMTOFF
|
|
|
|
/* Define to 1 if you have the <unistd.h> header file. */
|
|
#undef HAVE_UNISTD_H
|
|
|
|
/* Define to 1 if you have the `unlink' function. */
|
|
#undef HAVE_UNLINK
|
|
|
|
/* Define to 1 if you have the <windows.h> header file. */
|
|
#undef HAVE_WINDOWS_H
|
|
|
|
/* Using i386 COFF? */
|
|
#undef I386COFF
|
|
|
|
/* Define to the sub-directory in which libtool stores uninstalled libraries.
|
|
*/
|
|
#undef LT_OBJDIR
|
|
|
|
/* Default CPU for MIPS targets. */
|
|
#undef MIPS_CPU_STRING_DEFAULT
|
|
|
|
/* Generate 64-bit code by default on MIPS targets. */
|
|
#undef MIPS_DEFAULT_64BIT
|
|
|
|
/* Choose a default ABI for MIPS targets. */
|
|
#undef MIPS_DEFAULT_ABI
|
|
|
|
/* Define value for nds32_arch_name */
|
|
#undef NDS32_DEFAULT_ARCH_NAME
|
|
|
|
/* Define default value for nds32_audio_ext */
|
|
#undef NDS32_DEFAULT_AUDIO_EXT
|
|
|
|
/* Define default value for nds32_dsp_ext */
|
|
#undef NDS32_DEFAULT_DSP_EXT
|
|
|
|
/* Define default value for nds32_dx_regs */
|
|
#undef NDS32_DEFAULT_DX_REGS
|
|
|
|
/* Define default value for nds32_perf_ext */
|
|
#undef NDS32_DEFAULT_PERF_EXT
|
|
|
|
/* Define default value for nds32_perf_ext2 */
|
|
#undef NDS32_DEFAULT_PERF_EXT2
|
|
|
|
/* Define default value for nds32_string_ext */
|
|
#undef NDS32_DEFAULT_STRING_EXT
|
|
|
|
/* Define default value for nds32_zol_ext */
|
|
#undef NDS32_DEFAULT_ZOL_EXT
|
|
|
|
/* Define default value for nds32_linux_toolchain */
|
|
#undef NDS32_LINUX_TOOLCHAIN
|
|
|
|
/* Define if environ is not declared in system header files. */
|
|
#undef NEED_DECLARATION_ENVIRON
|
|
|
|
/* Define if errno is not declared in system header files. */
|
|
#undef NEED_DECLARATION_ERRNO
|
|
|
|
/* Define if ffs is not declared in system header files. */
|
|
#undef NEED_DECLARATION_FFS
|
|
|
|
/* Define if free is not declared in system header files. */
|
|
#undef NEED_DECLARATION_FREE
|
|
|
|
/* Define if malloc is not declared in system header files. */
|
|
#undef NEED_DECLARATION_MALLOC
|
|
|
|
/* Define if sbrk is not declared in system header files. */
|
|
#undef NEED_DECLARATION_SBRK
|
|
|
|
/* Define if strstr is not declared in system header files. */
|
|
#undef NEED_DECLARATION_STRSTR
|
|
|
|
/* a.out support? */
|
|
#undef OBJ_MAYBE_AOUT
|
|
|
|
/* COFF support? */
|
|
#undef OBJ_MAYBE_COFF
|
|
|
|
/* ECOFF support? */
|
|
#undef OBJ_MAYBE_ECOFF
|
|
|
|
/* ELF support? */
|
|
#undef OBJ_MAYBE_ELF
|
|
|
|
/* generic support? */
|
|
#undef OBJ_MAYBE_GENERIC
|
|
|
|
/* SOM support? */
|
|
#undef OBJ_MAYBE_SOM
|
|
|
|
/* Name of package */
|
|
#undef PACKAGE
|
|
|
|
/* Define to the address where bug reports for this package should be sent. */
|
|
#undef PACKAGE_BUGREPORT
|
|
|
|
/* Define to the full name of this package. */
|
|
#undef PACKAGE_NAME
|
|
|
|
/* Define to the full name and version of this package. */
|
|
#undef PACKAGE_STRING
|
|
|
|
/* Define to the one symbol short name of this package. */
|
|
#undef PACKAGE_TARNAME
|
|
|
|
/* Define to the home page for this package. */
|
|
#undef PACKAGE_URL
|
|
|
|
/* Define to the version of this package. */
|
|
#undef PACKAGE_VERSION
|
|
|
|
/* If using the C implementation of alloca, define if you know the
|
|
direction of stack growth for your system; otherwise it will be
|
|
automatically deduced at runtime.
|
|
STACK_DIRECTION > 0 => grows toward higher addresses
|
|
STACK_DIRECTION < 0 => grows toward lower addresses
|
|
STACK_DIRECTION = 0 => direction of growth unknown */
|
|
#undef STACK_DIRECTION
|
|
|
|
/* Define to 1 if you have the ANSI C header files. */
|
|
#undef STDC_HEADERS
|
|
|
|
/* Using strict COFF? */
|
|
#undef STRICTCOFF
|
|
|
|
/* Define if you can safely include both <string.h> and <strings.h>. */
|
|
#undef STRING_WITH_STRINGS
|
|
|
|
/* Target alias. */
|
|
#undef TARGET_ALIAS
|
|
|
|
/* Define as 1 if big endian. */
|
|
#undef TARGET_BYTES_BIG_ENDIAN
|
|
|
|
/* Canonical target. */
|
|
#undef TARGET_CANONICAL
|
|
|
|
/* Target CPU. */
|
|
#undef TARGET_CPU
|
|
|
|
/* Target OS. */
|
|
#undef TARGET_OS
|
|
|
|
/* Define if default target is PowerPC Solaris. */
|
|
#undef TARGET_SOLARIS_COMMENT
|
|
|
|
/* Target vendor. */
|
|
#undef TARGET_VENDOR
|
|
|
|
/* Target specific CPU. */
|
|
#undef TARGET_WITH_CPU
|
|
|
|
/* Use b modifier when opening binary files? */
|
|
#undef USE_BINARY_FOPEN
|
|
|
|
/* Use emulation support? */
|
|
#undef USE_EMULATIONS
|
|
|
|
/* Allow use of E_MIPS_ABI_O32 on MIPS targets. */
|
|
#undef USE_E_MIPS_ABI_O32
|
|
|
|
/* Enable extensions on AIX 3, Interix. */
|
|
#ifndef _ALL_SOURCE
|
|
# undef _ALL_SOURCE
|
|
#endif
|
|
/* Enable GNU extensions on systems that have them. */
|
|
#ifndef _GNU_SOURCE
|
|
# undef _GNU_SOURCE
|
|
#endif
|
|
/* Enable threading extensions on Solaris. */
|
|
#ifndef _POSIX_PTHREAD_SEMANTICS
|
|
# undef _POSIX_PTHREAD_SEMANTICS
|
|
#endif
|
|
/* Enable extensions on HP NonStop. */
|
|
#ifndef _TANDEM_SOURCE
|
|
# undef _TANDEM_SOURCE
|
|
#endif
|
|
/* Enable general extensions on Solaris. */
|
|
#ifndef __EXTENSIONS__
|
|
# undef __EXTENSIONS__
|
|
#endif
|
|
|
|
|
|
/* Using cgen code? */
|
|
#undef USING_CGEN
|
|
|
|
/* Version number of package */
|
|
#undef VERSION
|
|
|
|
/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
|
|
significant byte first (like Motorola and SPARC, unlike Intel). */
|
|
#if defined AC_APPLE_UNIVERSAL_BUILD
|
|
# if defined __BIG_ENDIAN__
|
|
# define WORDS_BIGENDIAN 1
|
|
# endif
|
|
#else
|
|
# ifndef WORDS_BIGENDIAN
|
|
# undef WORDS_BIGENDIAN
|
|
# endif
|
|
#endif
|
|
|
|
/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a
|
|
`char[]'. */
|
|
#undef YYTEXT_POINTER
|
|
|
|
/* Enable large inode numbers on Mac OS X 10.5. */
|
|
#ifndef _DARWIN_USE_64_BIT_INODE
|
|
# define _DARWIN_USE_64_BIT_INODE 1
|
|
#endif
|
|
|
|
/* Number of bits in a file offset, on hosts where this is settable. */
|
|
#undef _FILE_OFFSET_BITS
|
|
|
|
/* Define for large files, on AIX-style hosts. */
|
|
#undef _LARGE_FILES
|
|
|
|
/* Define to 1 if on MINIX. */
|
|
#undef _MINIX
|
|
|
|
/* Define to 2 if the system does not provide POSIX.1 features except with
|
|
this defined. */
|
|
#undef _POSIX_1_SOURCE
|
|
|
|
/* Define to 1 if you need to in order for `stat' and other things to work. */
|
|
#undef _POSIX_SOURCE
|
|
|
|
/* Define to `__inline__' or `__inline' if that's what the C compiler
|
|
calls it, or to nothing if 'inline' is not supported under any name. */
|
|
#ifndef __cplusplus
|
|
#undef inline
|
|
#endif
|
|
|
|
/* Define to `unsigned int' if <sys/types.h> does not define. */
|
|
#undef size_t
|