mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-01 14:03:56 +08:00
c3ae2f98d0
2001-04-18 matthew green <mrg@redhat.com> * armcopro.c (write_cp15_reg): Set CHANGEMODE if endianness changes. (read_cp15_reg): Make non-static. (XScale_cp15_LDC): Update for write_cp15_reg() change. (XScale_cp15_MCR): Likewise. (XScale_cp15_write_reg): Likewise. (XScale_check_memacc): New function. Check for breakpoints being activated by memory accesses. Does not support the Branch Target Buffer. (XScale_set_fsr_far): New function. Set FSR and FAR for XScale. (XScale_debug_moe): New function. Set the debug Method Of Entry, if configured. (write_cp14_reg): Reset count counter if requested. * armdefs.h (struct ARMul_State): New members `LastTime' and `CP14R0_CCD' used for the timer/counters. (ARMul_CP13_R0_FIQ, ARMul_CP13_R0_IRQ, ARMul_CP13_R8_PMUS, ARMul_CP14_R0_ENABLE, ARMul_CP14_R0_CLKRST, ARMul_CP14_R0_CCD, ARMul_CP14_R0_INTEN0, ARMul_CP14_R0_INTEN1, ARMul_CP14_R0_INTEN2, ARMul_CP14_R0_FLAG0, ARMul_CP14_R0_FLAG1, ARMul_CP14_R0_FLAG2, ARMul_CP14_R10_MOE_IB, ARMul_CP14_R10_MOE_DB, ARMul_CP14_R10_MOE_BT, ARMul_CP15_R1_ENDIAN, ARMul_CP15_R1_ALIGN, ARMul_CP15_R5_X, ARMul_CP15_R5_ST_ALIGN, ARMul_CP15_R5_IMPRE, ARMul_CP15_R5_MMU_EXCPT, ARMul_CP15_DBCON_M, ARMul_CP15_DBCON_E1, ARMul_CP15_DBCON_E0): New defines for XScale registers. (XScale_check_memacc, XScale_set_fsr_far, XScale_debug_moe): Prototype. (ARMul_Emulate32, ARMul_Emulate26): Clean up function definition. (ARMul_Emulate32): Handle the clock counter and hardware instruction breakpoints. Call XScale_set_fsr_far() for software breakpoints and software interrupts. (LoadMult): Call XScale_set_fsr_far() for data aborts. (LoadSMult): Likewise. (StoreMult): Likewise. (StoreSMult): Likewise. * armemu.h (write_cp15_reg): Update prototype. * arminit.c (ARMul_NewState): Initialise CP14R0_CCD and LastTime. (ARMul_Abort): If XScale, check for FIQ and IRQ being enabled in CP13 register 0. * armvirt.c (GetWord): Call XScale_check_memacc(). (PutWord): Likewise. |
||
---|---|---|
.. | ||
acconfig.h | ||
armcopro.c | ||
armdefs.h | ||
armemu.c | ||
armemu.h | ||
armfpe.h | ||
arminit.c | ||
armopts.h | ||
armos.c | ||
armos.h | ||
armrdi.c | ||
armsupp.c | ||
armvirt.c | ||
bag.c | ||
bag.h | ||
ChangeLog | ||
communicate.c | ||
communicate.h | ||
config.in | ||
configure | ||
configure.in | ||
COPYING | ||
dbg_conf.h | ||
dbg_cp.h | ||
dbg_hif.h | ||
dbg_rdi.h | ||
gdbhost.c | ||
gdbhost.h | ||
kid.c | ||
main.c | ||
Makefile.in | ||
parent.c | ||
README.Cygnus | ||
tconfig.in | ||
thumbemu.c | ||
wrapper.c |
This directory contains the standard release of the ARMulator from Advanced RISC Machines, and was ftp'd from. ftp.cl.cam.ac.uk:/arm/gnu It likes to use TCP/IP between the simulator and the host, which is nice, but is a pain to use under anything non-unix. I've added created a new Makefile.in (the original in Makefile.orig) to build a version of the simulator without the TCP/IP stuff, and a wrapper.c to link directly into gdb and the run command. It should be possible (barring major changes in the layout of the armulator) to upgrade the simulator by copying all the files out of a release into this directory and renaming the Makefile. (Except that I changed armos.c to work more simply with our simulator rigs) Steve sac@cygnus.com Mon May 15 12:03:28 PDT 1995