binutils-gdb/gdb
Fred Fish 570a390281 * tests1.exp (test_modes): Remove *-*-* setup_sfail for
"print unnumbered set range mode" and
	"print numbered set range mode".
1996-06-23 17:24:20 +00:00
..
29k-share Update FSF address. 1995-08-02 03:41:12 +00:00
Attic
config * h8300-dep.c (gdb_print_insn_h8300): Handle the H8/S. 1996-06-18 23:29:39 +00:00
doc * Makefile.in (DVIPS): New define, set to dvips. 1996-06-17 22:37:34 +00:00
gdbserver Add gdbreplay.c 1996-01-24 22:44:22 +00:00
nlm add maintainer-clean Makefile targets 1995-09-20 17:24:12 +00:00
testsuite * tests1.exp (test_modes): Remove *-*-* setup_sfail for 1996-06-23 17:24:20 +00:00
vx-share Added "regPacket.h" to "Things to Keep" 1995-04-10 21:18:02 +00:00
.gdbinit * gdb.gdb: New file. 1995-04-13 00:46:52 +00:00
.Sanitize * h8300-dep.c (gdb_print_insn_h8300): Handle the H8/S. 1996-06-18 23:29:39 +00:00
a29k-pinsn.c General cleanup and simplication of disassembler interface. 1995-01-17 04:36:51 +00:00
a29k-tdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
a68v-nat.c * coredep.c: Renamed to core-aout.c 1996-01-11 20:08:15 +00:00
a68v-xdep.c recording file death 1992-12-08 04:59:31 +00:00
abug-rom.c * abug-rom.c: Config file for the older style ABug monitor thatg 1996-05-09 18:39:15 +00:00
acconfig.h * config.in: Regenerated. 1996-06-13 18:44:33 +00:00
aclocal.m4 * config.in: Regenerated. 1996-06-13 18:44:33 +00:00
alpha-nat.c Changes from: David Mosberger-Tang <davidm@azstarnet.com> 1996-05-26 21:41:40 +00:00
alpha-tdep.c Changes from: David Mosberger-Tang <davidm@azstarnet.com> 1996-05-26 21:41:40 +00:00
altos-xdep.c * Makefile.in (COMMON_OBS): Use corefile.o rather than core.o 1995-11-05 00:58:57 +00:00
annotate.c * annotate.c (annotate_source, annotate_frame_begin): Issue 1995-11-18 12:19:25 +00:00
annotate.h Update FSF address. 1995-08-02 03:41:12 +00:00
arc-tdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
arm-convert.s
arm-tdep.c * arm-xdep.c: Move native-specific code to here from arm-tdep.c. 1996-04-05 04:14:11 +00:00
arm-xdep.c * arm-xdep.c: Move native-specific code to here from arm-tdep.c. 1996-04-05 04:14:11 +00:00
bcache.c From Michael Snyder <Michael_Snyder@next.com>: 1996-06-12 03:10:51 +00:00
bcache.h * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
blockframe.c * blockframe.c (inside_main_func): Fix a typo in previous change. 1995-08-14 21:42:17 +00:00
breakpoint.c * defs.h (read_command_lines, query_hook): Update prototypes. 1996-05-20 02:05:55 +00:00
breakpoint.h * From Peter Schauer: 1996-05-02 18:43:28 +00:00
buildsym.c * buildsym.c (end_symtab): Remove sort_pending and sort_linevec 1996-01-08 17:55:25 +00:00
buildsym.h * buildsym.c (end_symtab): Remove sort_pending and sort_linevec 1996-01-08 17:55:25 +00:00
c-exp.y * configure.in: Check for setpgid function. 1996-04-05 04:22:08 +00:00
c-lang.c * ch-exp.y: Replaced by ... 1995-11-30 03:26:34 +00:00
c-lang.h * c-lang.h (c_op_print_tab): Don't declare, some compilers 1995-12-06 01:33:49 +00:00
c-typeprint.c * demangle.c (is_cplus_marker): New function, checks if a 1996-02-16 06:14:15 +00:00
c-valprint.c * c-valprint.c (c_val_print): Fix printing for arrays defined 1996-04-29 23:25:27 +00:00
cadillac-patches recording file death 1992-12-08 04:59:31 +00:00
cadillac.c recording file death 1992-12-08 04:59:31 +00:00
call-cmds.h Update FSF address. 1995-08-02 03:41:12 +00:00
callback.c Changes to make the simulator work again. 1995-10-06 19:06:13 +00:00
callback.h Thu Sep 28 14:32:11 1995 steve chamberlain <sac@slash.cygnus.com> 1995-09-29 00:14:01 +00:00
ch-exp.c * ch-exp.c (ch_lex): In case of LOC_TYPEDEF call calculate_array_length. 1996-05-30 11:26:24 +00:00
ch-exp.y * ch-exp.y: Replaced by ... 1995-11-30 03:26:34 +00:00
ch-lang.c * ch-lang.c (evaluate_subexp_chill): Fix typo. 1996-03-23 19:52:50 +00:00
ch-lang.h Update FSF address. 1995-08-02 03:41:12 +00:00
ch-typeprint.c * ch-typeprint.c (chill_type_print_base): Slightly change of printing 1995-12-11 14:54:50 +00:00
ch-valprint.c * ch-valprint.c (chill_val_print): Remove call to calculate_array_length. 1996-04-10 10:01:30 +00:00
ChangeLog * gdbtk.tcl (populate_register_window): Make initial window one 1996-06-21 18:20:12 +00:00
ChangeLog-3.x
ChangeLog-92 * ChangeLog, ChangeLog-92: Split ChangeLog at 1993. 1993-05-18 15:16:01 +00:00
ChangeLog-93 * hpread.c: Include hp-symtab.h instead of hpux-symtab.h. 1994-11-25 08:06:49 +00:00
ChangeLog-94 Add configure to r16_files and arc_files in .Sanitize 1995-08-03 16:48:48 +00:00
ChangeLog-95 Remove SH3e sanitization. 1996-01-16 20:13:27 +00:00
ChangeLog-9091 Add configure to r16_files and arc_files in .Sanitize 1995-08-03 16:48:48 +00:00
ChangeLog.gm Merge supposedly (but not really) GM-specific bits into general MPW config 1994-09-13 00:50:38 +00:00
ChangeLog.hpread * hpread.c: Include hp-symtab.h instead of hpux-symtab.h. 1994-11-25 08:06:49 +00:00
ChangeLog.mpw Merge MPW ChangeLog in with generic ChangeLog 1995-04-11 01:55:20 +00:00
coff-solib.c Update FSF address. 1995-08-02 03:41:12 +00:00
coff-solib.h Update FSF address. 1995-08-02 03:41:12 +00:00
coffread.c * configure.in: Check for working mmap, ansi headers, string.h, 1995-08-01 20:14:27 +00:00
command.c * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
command.h
complaints.c Update FSF address. 1995-08-02 03:41:12 +00:00
complaints.h Update FSF address. 1995-08-02 03:41:12 +00:00
config.in * config.in: Regenerated. 1996-06-13 18:44:33 +00:00
config.sub recording file death 1992-12-08 04:59:31 +00:00
configure * configure.in: Revise sol-thread.o test. 1996-06-20 21:21:27 +00:00
configure.in * configure.in: Revise sol-thread.o test. 1996-06-20 21:21:27 +00:00
convex-tdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
convex-xdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
COPYING
copying.awk
copying.c
core-aout.c * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
core-regset.c * configure.in (AC_CHECK_HEADERS): Check for sys/procfs.h. 1996-01-27 18:51:09 +00:00
core-sol2.c * coredep.c: Renamed to core-aout.c 1996-01-11 20:08:15 +00:00
core-svr4.c * coredep.c: Renamed to core-aout.c 1996-01-11 20:08:15 +00:00
corefile.c * corefile.c (specify_exec_file_hook): Allow arbitrary number of 1996-04-22 22:31:10 +00:00
corelow.c * Makefile.in, breakpoint.c, corelow.c, fork-child.c, inflow.c, 1996-05-09 21:24:20 +00:00
cp-valprint.c * Makefile.in (scm-exp.o, scm-lang.o, scm-valprint.o): Add targets and 1996-04-09 06:09:33 +00:00
cpu32bug-rom.c Update FSF address. 1995-08-02 03:41:12 +00:00
cxux-nat.c Update FSF address. 1995-08-02 03:41:12 +00:00
dbxread.c Add new support for parsing cfront stabs. 1996-04-24 19:34:45 +00:00
dcache.c Changes from: David Mosberger-Tang <davidm@azstarnet.com> 1996-05-26 21:41:40 +00:00
dcache.h Update FSF address. 1995-08-02 03:41:12 +00:00
defs.h * defs.h: Define TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT 1996-04-12 16:53:08 +00:00
delta68-nat.c Update FSF address. 1995-08-02 03:41:12 +00:00
demangle.c * demangle.c (is_cplus_marker): New function, checks if a 1996-02-16 06:14:15 +00:00
demangle.h recording file death 1992-12-08 04:59:31 +00:00
dpx2-nat.c Update FSF address. 1995-08-02 03:41:12 +00:00
dst.h Merge Apollo patches from Troy Rollo (troy@cbme.unsw.edu.au): 1993-10-22 16:03:08 +00:00
dstread.c * coffread.c, dbxread.c, dstread.c, objfiles.c, os9kread.c, 1995-12-09 05:12:46 +00:00
dwarfread.c * symfile.c (INLINE_ADD_PSYMBOL): Remove ifdef. 1996-04-06 10:19:19 +00:00
ecoff.c recording file death 1992-12-08 04:59:31 +00:00
elfread.c * buildsym.c (end_symtab): Remove sort_pending and sort_linevec 1996-01-08 17:55:25 +00:00
energize-patches Blasting old junk 1995-05-11 02:01:22 +00:00
energize.c Blasting old junk 1995-05-11 02:01:22 +00:00
energize.h Blasting old junk 1995-05-11 02:01:22 +00:00
environ.c * configure.in: Check for working mmap, ansi headers, string.h, 1995-08-01 20:14:27 +00:00
environ.h
eval.c * eval.c (evaluate_subexp_standard): In case of TYPE_CODE_SET: 1996-04-09 08:28:50 +00:00
exc_request.defs From: Miles Bader <miles@gnu.ai.mit.edu> 1996-04-08 05:50:30 +00:00
exec.c * configure.in: Check for working mmap, ansi headers, string.h, 1995-08-01 20:14:27 +00:00
expprint.c * breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET 1995-10-27 17:48:36 +00:00
expression.h * breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET 1995-10-27 17:48:36 +00:00
f-exp.y * configure.in: Check for setpgid function. 1996-04-05 04:22:08 +00:00
f-lang.c * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
f-lang.h Update FSF address. 1995-08-02 03:41:12 +00:00
f-typeprint.c * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
f-valprint.c * alpha-tdep.c, c-exp.y, h8500-tdep.c, f-exp.y, f-valprint.c, 1995-11-30 01:43:37 +00:00
findvar.c * defs.h: Define TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT 1996-04-12 16:53:08 +00:00
fork-child.c * Makefile.in, breakpoint.c, corelow.c, fork-child.c, inflow.c, 1996-05-09 21:24:20 +00:00
frame.h * frame.h, symtab.h: Revise comments regarding baseregs. 1993-08-21 02:54:33 +00:00
gcc.patch * gcc.patch: Remove, relevant only to long-ago versions of GCC. 1995-08-15 01:07:54 +00:00
gdb_stat.h Update FSF address. 1995-08-02 03:41:12 +00:00
gdb_string.h Update FSF address. 1995-08-02 03:41:12 +00:00
gdb-stabs.h Update FSF address. 1995-08-02 03:41:12 +00:00
gdb-stop.c * fork-child.c (startup_inferior) [STARTUP_INFERIOR]: If defined, 1994-06-16 23:04:55 +00:00
gdb.gdb * gdb.gdb: New file. 1995-04-13 00:46:52 +00:00
gdba.el Update FSF address. 1995-08-02 03:41:12 +00:00
gdba.texi new, emacs gdb mode with annotation stuff 1994-04-28 18:34:28 +00:00
gdbcmd.h * maint.c: New file. 1992-07-06 00:22:57 +00:00
gdbcore.h
gdbthread.h * Makefile.in, breakpoint.c, corelow.c, fork-child.c, inflow.c, 1996-05-09 21:24:20 +00:00
gdbtk.c * gdbtk.c (get_register): Support for printing raw formats. 1996-06-21 17:03:22 +00:00
gdbtk.tcl * gdbtk.tcl (populate_register_window): Make initial window one 1996-06-21 18:20:12 +00:00
gdbtypes.c Add new support for parsing cfront stabs. 1996-04-24 19:34:45 +00:00
gdbtypes.h * gdbtypes.h (enum type_code): Added TYPE_CODE_TYPEDEF. 1995-11-30 01:07:28 +00:00
gmagic.c * magic.h: Renamed to gmagic.h to avoid <magic.h> conflict. 1995-11-28 19:33:22 +00:00
gmagic.h * magic.h: Renamed to gmagic.h to avoid <magic.h> conflict. 1995-11-28 19:33:22 +00:00
gnu-nat.c From: Miles Bader <miles@gnu.ai.mit.edu> 1996-04-08 05:50:30 +00:00
gnu-nat.h From: Miles Bader <miles@gnu.ai.mit.edu> 1996-04-08 05:50:30 +00:00
gnu-regex.c * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
gnu-regex.h * regex.h: Renamed to gnu-regex.h. 1995-10-26 23:54:44 +00:00
go32-xdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
gould-tdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
gould-xdep.c * Makefile.in (COMMON_OBS): Use corefile.o rather than core.o 1995-11-05 00:58:57 +00:00
h8300-tdep.c * h8300-dep.c (gdb_print_insn_h8300): Handle the H8/S. 1996-06-18 23:29:39 +00:00
h8500-tdep.c * alpha-tdep.c, c-exp.y, h8500-tdep.c, f-exp.y, f-valprint.c, 1995-11-30 01:43:37 +00:00
hds-tdep.c recording file death 1992-12-08 04:59:31 +00:00
hp300ux-nat.c * hp300ux-nat.c (getpagesize): Remove unused function 1996-01-19 15:36:24 +00:00
hppa-coredep.c recording file death 1992-12-08 04:59:31 +00:00
hppa-pinsn.c General cleanup and simplication of disassembler interface. 1995-01-17 04:36:51 +00:00
hppa-tdep.c * Makefile.in (scm-exp.o, scm-lang.o, scm-valprint.o): Add targets and 1996-04-09 06:09:33 +00:00
hppab-core.c * Merge in HPPA/BSD patches from Utah: 1993-04-23 23:43:18 +00:00
hppab-nat.c Update FSF address. 1995-08-02 03:41:12 +00:00
hppab-tdep.c * Merge in HPPA/BSD patches from Utah: 1993-04-23 23:43:18 +00:00
hppab-xdep.c recording file death 1992-12-08 04:59:31 +00:00
hppabsd-core.c recording file death 1992-12-08 04:59:31 +00:00
hppabsd-xdep.c recording file death 1992-12-08 04:59:31 +00:00
hppah-nat.c * hppah-nat.c (store_inferior_registers, store_inferior_registers, 1996-04-01 01:25:44 +00:00
hppah-tdep.c * Merge in HPPA/BSD patches from Utah: 1993-04-23 23:43:18 +00:00
hppah-xdep.c recording file death 1992-12-08 04:59:31 +00:00
hppahpux-tdep.c recording file death 1992-12-08 04:59:31 +00:00
hppahpux-xdep.c recording file death 1992-12-08 04:59:31 +00:00
hppam3-nat.c Update FSF address. 1995-08-02 03:41:12 +00:00
hpread.c * symfile.c (INLINE_ADD_PSYMBOL): Remove ifdef. 1996-04-06 10:19:19 +00:00
i386-nlmstub.c * Makefile.in: Removed prelude.o, i386-nlmstub.o, nlmstub.o, 1994-09-19 23:00:48 +00:00
i386-stub.c * elfread.c, mipsread.c: Include <string.h>. 1992-11-04 23:31:52 +00:00
i386-tdep.c * configure.in: Check for working mmap, ansi headers, string.h, 1995-08-01 20:14:27 +00:00
i386aix-nat.c * coredep.c: Renamed to core-aout.c 1996-01-11 20:08:15 +00:00
i386b-nat.c * i386b-nat.c: Revert part of Mar 5 change. FreeBSD collapsed the 1996-03-07 20:13:45 +00:00
i386gnu-nat.c From: Miles Bader <miles@gnu.ai.mit.edu> 1996-04-08 05:50:30 +00:00
i386ly-nat.c Please CVS, let me kill this file! 1993-11-17 17:40:24 +00:00
i386ly-tdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
i386lynx-nat.c Change the stream argument to _filtered to GDB_FILE *. 1993-11-01 22:25:23 +00:00
i386m3-nat.c * coredep.c: Renamed to core-aout.c 1996-01-11 20:08:15 +00:00
i386m3-xdep.c new for mach 1993-10-07 18:03:51 +00:00
i386mach-nat.c * coredep.c: Renamed to core-aout.c 1996-01-11 20:08:15 +00:00
i386v4-nat.c * i386v4-nat.c (defs.h): Include before testing HAVE_SYS_PROCFS_H. 1996-03-17 01:08:19 +00:00
i386v-nat.c Changes to hexdump "struct user" for child process on some configurations 1996-01-04 21:09:59 +00:00
i387-tdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
i860-break.h * alldeps.mak, configure.in, i860-break.h, i860-opcode.h, 1993-03-25 23:08:24 +00:00
i860-opcode.h * alldeps.mak, configure.in, i860-break.h, i860-opcode.h, 1993-03-25 23:08:24 +00:00
i860-pinsn.c * alldeps.mak, configure.in, i860-break.h, i860-opcode.h, 1993-03-25 23:08:24 +00:00
i860-tdep.c * alldeps.mak, configure.in, i860-break.h, i860-opcode.h, 1993-03-25 23:08:24 +00:00
i960-tdep.c * mon960-rom.c: New file; support mon960 rom monitor on i960. 1996-03-11 23:49:22 +00:00
infcmd.c * fork-child.c (fork_inferior), inferior.h: init_trace_fun now 1996-05-06 21:27:37 +00:00
inferior.h * breakpoint.c (ignore, condition): Add usage notes to help strings. 1994-07-16 22:57:23 +00:00
inflow.c * configure.in: Check for working mmap, ansi headers, string.h, 1995-08-01 20:14:27 +00:00
infptrace.c * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
infrun.c * Makefile.in, breakpoint.c, corelow.c, fork-child.c, inflow.c, 1996-05-09 21:24:20 +00:00
inftarg.c * target.c, target.h: New variables target_activity_function and 1994-05-20 03:43:39 +00:00
irix4-nat.c * lynx-nat.c, irix4-nat.c, sparc-nat.c: Include gdbcore.h 1996-01-12 16:01:29 +00:00
irix5-nat.c * symfile.c (auto_solib_add): Renamed from auto_solib_add_at_startup. 1996-01-23 21:06:34 +00:00
isi-xdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
kdb-start.c Update FSF address. 1995-08-02 03:41:12 +00:00
language.c * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
language.h Fix typo in comment. 1996-01-23 23:11:07 +00:00
lynx-nat.c * lynx-nat.c, irix4-nat.c, sparc-nat.c: Include gdbcore.h 1996-01-12 16:01:29 +00:00
m2-exp.y * configure.in: Check for setpgid function. 1996-04-05 04:22:08 +00:00
m2-lang.c Update FSF address. 1995-08-02 03:41:12 +00:00
m2-lang.h Update FSF address. 1995-08-02 03:41:12 +00:00
m2-typeprint.c Update FSF address. 1995-08-02 03:41:12 +00:00
m2-valprint.c Update FSF address. 1995-08-02 03:41:12 +00:00
m3-nat.c * fork-child.c (fork_inferior), inferior.h: init_trace_fun now 1996-05-06 21:27:37 +00:00
m68k-stub.c * remote.c: Change PBUFSIZ back to 400. John's 28 Feb 1992 change 1993-10-26 20:41:35 +00:00
m68k-tdep.c remove obsolete comment about call function stuff being duplicated 1993-09-03 15:56:00 +00:00
m68kly-nat.c Please CVS, let me kill these files... 1993-11-17 17:39:00 +00:00
m68knbsd-nat.c * i386b-nat.c, m68knbsd-nat.c (fetch_core_registers): Provide 1996-03-05 20:09:21 +00:00
m88k-nat.c Update FSF address. 1995-08-02 03:41:12 +00:00
m88k-opcode.h recording file death 1992-12-08 04:59:31 +00:00
m88k-pinsn.c General cleanup and simplication of disassembler interface. 1995-01-17 04:36:51 +00:00
m88k-tdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
m88k-xdep.c recording file death 1992-12-08 04:59:31 +00:00
mac-defs.h Tue Apr 26 17:44:27 1994 Stan Shebs (shebs@andros.cygnus.com) 1994-04-27 00:55:59 +00:00
mac-gdb.r * configure.in (powerpc-*-macos*): New target configuration. 1995-12-12 02:35:27 +00:00
mac-nat.c * Makefile.in, breakpoint.c, corelow.c, fork-child.c, inflow.c, 1996-05-09 21:24:20 +00:00
mac-xdep.c * mpw-config.in: Add support for PowerMac host, add beginnings 1995-10-27 05:04:44 +00:00
macgdb.r * mpw-config.in: Adapt to work with autoconf'ed configury; 1995-10-19 19:29:52 +00:00
mach386-xdep.c recording file death 1992-12-08 04:59:31 +00:00
magic.c * magic.h: Renamed to gmagic.h to avoid <magic.h> conflict. 1995-11-28 19:33:22 +00:00
magic.h * magic.h: Renamed to gmagic.h to avoid <magic.h> conflict. 1995-11-28 19:33:22 +00:00
main.c * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
maint.c * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
Makefile recording file death 1992-12-08 04:59:31 +00:00
Makefile.in * Makefile.in, breakpoint.c, corelow.c, fork-child.c, inflow.c, 1996-05-09 21:24:20 +00:00
Makefile.in-29k-UDI Remove Makefile.in-29k-UDI. It's no longer needed now that the 29K stuff has 1993-02-02 04:52:30 +00:00
mdebugread.c Changes from: David Mosberger-Tang <davidm@azstarnet.com> 1996-05-26 21:41:40 +00:00
mem-break.c
minimon.h Update FSF address. 1995-08-02 03:41:12 +00:00
minsyms.c * blockframe.c (frameless_look_for_prologue): 1996-05-18 09:53:12 +00:00
mips-nat.c * coredep.c: Renamed to core-aout.c 1996-01-11 20:08:15 +00:00
mips-tdep.c * alpha-tdep.c, mips-tdep.c (init_extra_frame_info): 1995-10-21 13:14:53 +00:00
mipsm3-nat.c Update FSF address. 1995-08-02 03:41:12 +00:00
mipsm3-xdep.c new for mach 1993-10-07 18:03:51 +00:00
mipsread.c * configure.in: Check for working mmap, ansi headers, string.h, 1995-08-01 20:14:27 +00:00
mipsv4-nat.c * config/mips/tm-mips.h (UNUSED_REGNUM): Define. 1995-09-16 20:37:36 +00:00
mmap-alloc.c recording file death 1992-12-08 04:59:31 +00:00
mmap-sbrk.c recording file death 1992-12-08 04:59:31 +00:00
mon960-rom.c * mon960-rom.c (mon960_cmds): Remove forward decl. 1996-04-28 22:14:17 +00:00
monitor.c * monitor.c: Use int rather than LONGEST for values, since 1996-04-19 01:55:57 +00:00
monitor.h * dsrec.c (load_srec): Add WAITACK parameter, for machines 1996-05-21 06:09:23 +00:00
mpw-config.in * configure.in (powerpc-*-macos*): New target configuration. 1995-12-12 02:35:27 +00:00
mpw-init.c Actually lose it 1994-12-14 00:47:58 +00:00
mpw-make.in * mpw-config.in: Adapt to work with autoconf'ed configury; 1995-10-19 19:29:52 +00:00
mpw-make.sed * mpw-make.sed: Edit @THREAD_DB_OBS@ out of makefile. 1996-05-23 19:12:45 +00:00
mpw-xconfig.in Merge supposedly (but not really) GM-specific bits into general MPW config 1994-09-13 00:50:38 +00:00
msg_reply.defs From: Miles Bader <miles@gnu.ai.mit.edu> 1996-04-08 05:50:30 +00:00
msg.defs From: Miles Bader <miles@gnu.ai.mit.edu> 1996-04-08 05:50:30 +00:00
nat-sparc.c recording file death 1992-12-08 04:59:31 +00:00
nat-sun4os4.h recording file death 1992-12-08 04:59:31 +00:00
nat-trash.h recording file death 1992-12-08 04:59:31 +00:00
NEWS Changes from: David Mosberger-Tang <davidm@azstarnet.com> 1996-05-26 21:41:40 +00:00
news-xdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
nindy-tdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
nlmread.c Update FSF address. 1995-08-02 03:41:12 +00:00
nlmstub.def * nlmstub.def: Removed, this was moved to nlm/gdbserve.def 1995-03-15 21:24:56 +00:00
nm-apollo68b.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-apollo68v.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-hp300bsd.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-hp300hpux.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-hppab.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-hppah.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-i386bsd.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-i386mach.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-i386sco4.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-i386sco.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-i386v4.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-i386v.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-irix3.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-irix4.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-linux.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-m88k.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-mips.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-news.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-rs6000.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-sun2.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-sun3.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-sun4os4.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-sun386.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-sysv4.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-trash.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-ultra3.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-umax.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
nm-vax.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
notify.defs From: Miles Bader <miles@gnu.ai.mit.edu> 1996-04-08 05:50:30 +00:00
ns32k-tdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
ns32km3-nat.c * coredep.c: Renamed to core-aout.c 1996-01-11 20:08:15 +00:00
ns32km3-xdep.c new for mach 1993-10-07 18:03:51 +00:00
objfiles.c * Makefile.in (scm-exp.o, scm-lang.o, scm-valprint.o): Add targets and 1996-04-09 06:09:33 +00:00
objfiles.h * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
op50-rom.c * op50-rom.c (op50n_cmds): Send ".\r" after the interrupt 1995-09-21 03:11:16 +00:00
os9kread.c * symfile.c (INLINE_ADD_PSYMBOL): Remove ifdef. 1996-04-06 10:19:19 +00:00
os9kstab.c * os9kread.c (os9k_process_one_symbol): Rename 1994-03-02 03:01:34 +00:00
os68k-xdep.c * Makefile.in (TARDIRS): Add sparclite demo dir. 1993-02-04 10:30:19 +00:00
osfsolib.c * symfile.c (auto_solib_add): Renamed from auto_solib_add_at_startup. 1996-01-23 21:06:34 +00:00
paread.c * somread.c: Renamed from paread.c. Changed function names and 1994-06-27 06:09:40 +00:00
parse.c * Add native support for long double data type. 1996-02-17 00:07:35 +00:00
parser-defs.h * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
partial-stab.h Add new support for parsing cfront stabs. 1996-04-24 19:34:45 +00:00
ppcbug-rom.c Make ppcbug work 1995-12-21 17:06:04 +00:00
printcmd.c * configure.in: Check for working mmap, ansi headers, string.h, 1995-08-01 20:14:27 +00:00
process_reply.defs From: Miles Bader <miles@gnu.ai.mit.edu> 1996-04-08 05:50:30 +00:00
procfs.c * procfs.c (procfs_thread_alive procfs_stop): Make static. 1996-05-15 01:09:57 +00:00
ptx4-nat.c Update FSF address. 1995-08-02 03:41:12 +00:00
pyr-tdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
pyr-xdep.c * Makefile.in (COMMON_OBS): Use corefile.o rather than core.o 1995-11-05 00:58:57 +00:00
README * Makefile.in (VERSION): Bump to 4.13.1 1994-08-14 20:13:01 +00:00
README.GDBTK Updated for Tcl 7.5a2 and Tk 4.1a2 1996-01-24 06:27:59 +00:00
remote-adapt.c * somsolib.c (som_solib_add): Use xmalloc rather than bare 1996-02-12 22:13:18 +00:00
remote-arc.c Update FSF address. 1995-08-02 03:41:12 +00:00
remote-array.c * NEWS: Make note of new record and replay feature for 1996-01-24 21:30:37 +00:00
remote-bug.c Update FSF address. 1995-08-02 03:41:12 +00:00
remote-e7000.c * symfile.c (report_transfer_performance): New function. 1996-04-04 23:57:02 +00:00
remote-eb.c Update FSF address. 1995-08-02 03:41:12 +00:00
remote-es1800.c rename for 14-char filenames 1993-06-11 19:00:25 +00:00
remote-es.c Update FSF address. 1995-08-02 03:41:12 +00:00
remote-est.c * dsrec.c (load_srec): Add WAITACK parameter, for machines 1996-05-21 06:09:23 +00:00
remote-hms.c * remote-hms.c (hms_ops): Add value for to_thread_alive. 1996-01-17 21:26:28 +00:00
remote-mips.c Removed EINVAL reference in remote-mips.c, and put a hardcoded 22 in its 1996-05-28 23:20:12 +00:00
remote-mm.c * somsolib.c (som_solib_add): Use xmalloc rather than bare 1996-02-12 22:13:18 +00:00
remote-mon.c Blasting old junk 1995-05-11 02:01:22 +00:00
remote-monitor.c * Rename files for 14-character limits: 1993-08-27 16:59:46 +00:00
remote-nindy.c * remote-nindy.c (nindy_open): Acquire more target state so that 1996-04-13 21:33:59 +00:00
remote-nrom.c * remote-nrom.c (nrom_ops): Add value for to_thread_alive, 1995-10-03 23:58:49 +00:00
remote-os9k.c * monitor.h: Clean up comment formatting. 1996-04-22 23:46:02 +00:00
remote-pa.c * Makefile.in (scm-exp.o, scm-lang.o, scm-valprint.o): Add targets and 1996-04-09 06:09:33 +00:00
remote-ppcbug.c Switch to using new fangled monitor.o routines for ppcbug, rather than remote 1995-11-15 00:11:14 +00:00
remote-rdp.c * remote-rdp.c (rdp_init): Take out variable baud rate stuff. 1995-09-30 00:06:55 +00:00
remote-ser.c recording file death 1992-12-08 04:59:31 +00:00
remote-sim.c * coffread.c (coff_symtab_read): Handle C_LABEL symbols like 1996-05-15 14:28:34 +00:00
remote-sim.h * srcwin.cpp (CSrcScroll1::OnDraw): Don't show disabled 1995-10-13 21:15:18 +00:00
remote-sp64sim.c * remote-sim.h: New file. 1993-09-17 17:27:43 +00:00
remote-st2000.c rename for 14-char filenames 1993-06-11 19:00:25 +00:00
remote-st.c Update FSF address. 1995-08-02 03:41:12 +00:00
remote-udi.c * remote-hms.c (hms_ops): Add value for to_thread_alive. 1996-01-17 21:26:28 +00:00
remote-utils.c Thu Sep 28 14:32:11 1995 steve chamberlain <sac@slash.cygnus.com> 1995-09-29 00:14:01 +00:00
remote-utils.h Update FSF address. 1995-08-02 03:41:12 +00:00
remote-vx29k.c Update FSF address. 1995-08-02 03:41:12 +00:00
remote-vx68.c Update FSF address. 1995-08-02 03:41:12 +00:00
remote-vx960.c Update FSF address. 1995-08-02 03:41:12 +00:00
remote-vx.c Update FSF address. 1995-08-02 03:41:12 +00:00
remote-vxmips.c * configure.in (mips*-*-vxworks*): New config. 1996-02-25 22:05:00 +00:00
remote-vxsparc.c * remote-vxsparc.c (vx_convert_to_virtual, vx_convert_from_virtual): 1996-01-24 02:59:06 +00:00
remote-z8k.c * config/h8300/h8300.mt: Renamed from h8300hms.mt. 1995-07-01 00:22:57 +00:00
remote.c Support for bi-endian remote breakpoints. 1996-04-28 23:43:05 +00:00
reply_mig_hack.awk From: Miles Bader <miles@gnu.ai.mit.edu> 1996-04-08 05:50:30 +00:00
rom68k-rom.c Update FSF address. 1995-08-02 03:41:12 +00:00
rs6k-opcode.def recording file death 1992-12-08 04:59:31 +00:00
rs6k-opcode.h recording file death 1992-12-08 04:59:31 +00:00
rs6000-nat.c * Makefile.in (rs6000-nat.o): Dependant on xcoffsolib.h. 1996-05-02 01:32:41 +00:00
rs6000-pinsn.c General cleanup and simplication of disassembler interface. 1995-01-17 04:36:51 +00:00
rs6000-tdep.c Do not do XCOFF hoooks for ELF systems 1996-05-06 11:56:56 +00:00
rs6000-xdep.c recording file death 1992-12-08 04:59:31 +00:00
saber.suppress * dache.c (struct dcache_block): Change data member from unsigned char 1995-07-18 04:38:06 +00:00
scm-exp.c * parse.c (write_dollar_variable): New function. 1995-10-05 22:15:49 +00:00
scm-lang.c * Makefile.in (scm-exp.o, scm-lang.o, scm-valprint.o): Add targets and 1996-04-09 06:09:33 +00:00
scm-lang.h * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
scm-tags.h * Makefile.in (CC-LD): Rename to CC_LD, so MPW xform works. 1995-10-19 19:54:44 +00:00
scm-valprint.c * scm-valprint.c (scm_isymnames): Remove "#@" prefix. 1995-11-30 03:10:59 +00:00
ser-bsd.c * Makefile.in (SFILES OBS): Add serial.[co] & ser-hardwire.[co]. 1993-04-06 05:50:54 +00:00
ser-e7kpc.c Update FSF address. 1995-08-02 03:41:12 +00:00
ser-go32-para.c Update FSF address. 1995-08-02 03:41:12 +00:00
ser-go32.c Update FSF address. 1995-08-02 03:41:12 +00:00
ser-mac.c * remote-mips.c (mips_receive_header): Recognize \012 instead 1996-01-09 00:37:35 +00:00
ser-tcp.c * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
ser-termios.c * Makefile.in (SFILES OBS): Add serial.[co] & ser-hardwire.[co]. 1993-04-06 05:50:54 +00:00
ser-unix.c Thu Sep 28 14:32:11 1995 steve chamberlain <sac@slash.cygnus.com> 1995-09-29 00:14:01 +00:00
serial.c * configure.in: Check for setpgid function. 1996-04-05 04:22:08 +00:00
serial.h * NEWS: Make note of new record and replay feature for 1996-01-24 21:30:37 +00:00
sh3-rom.c * dsrec.c (load_srec): Add WAITACK parameter, for machines 1996-05-21 06:09:23 +00:00
sh-stub.c * sh-stub.c: New file, was config/sh/stub.c. 1996-05-17 20:41:56 +00:00
sh-tdep.c SH3-E support from Allan Tajii <atajii@hmsi.com>: 1996-05-13 18:34:09 +00:00
signals.h Update FSF address. 1995-08-02 03:41:12 +00:00
sol-thread.c * Makefile.in (INTERNAL_LDFLAGS): Add in flags from configure. 1996-06-11 19:21:42 +00:00
solib.c * solib.c (solib_break_names): Add _r_debug_state for 1996-03-14 17:32:12 +00:00
solib.h * solib.c (solib_address): Return the name of the containing solib. 1995-11-19 07:16:03 +00:00
somread.c * buildsym.c (end_symtab): Remove sort_pending and sort_linevec 1996-01-08 17:55:25 +00:00
somsolib.c * somsolib.c (som_solib_create_inferior_hook): Handle tracking 1996-06-16 22:22:51 +00:00
somsolib.h Update FSF address. 1995-08-02 03:41:12 +00:00
source.c * configure.in: Check for working mmap, ansi headers, string.h, 1995-08-01 20:14:27 +00:00
sp64-tdep.c Merged into sparc-tdep.c. 1995-03-02 00:13:16 +00:00
sparc-nat.c * lynx-nat.c, irix4-nat.c, sparc-nat.c: Include gdbcore.h 1996-01-12 16:01:29 +00:00
sparc-stub.c * sparc-stub.c: add nop after 'bg good_wim'. 1995-03-22 01:06:36 +00:00
sparc-tdep.c * sparc-tdep.c (isbranch): Fix typo which caused wrong 1995-08-18 13:27:21 +00:00
sparcl-stub.c * dcache.c: Change default value of remotecache to off. It just 1995-10-16 18:25:19 +00:00
sparcl-tdep.c Update copyrights. Add copyright notice to configure.in. 1996-01-05 17:11:45 +00:00
sparclite-stub.c Added Files: 1994-06-10 23:26:59 +00:00
sparclite-tdep.c Added Files: 1994-06-10 23:26:59 +00:00
sparcly-nat.c * lynx-nat.c: Add Sparc support. 1994-01-22 01:58:55 +00:00
srec.h * dsrec.c (load_srec): Add WAITACK parameter, for machines 1996-05-21 06:09:23 +00:00
stabsread.c * stabsread.c: Changes and bug fixes for cfront support. 1996-04-27 09:47:53 +00:00
stabsread.h * bcache.c, bcache.h: New files to implement a byte cache. 1996-02-16 22:14:47 +00:00
stack.c * solib.c (solib_address): Return the name of the containing solib. 1995-11-19 07:16:03 +00:00
standalone.c * standalone.c (open, _initialize_standalone): Fix obvious typos 1996-02-22 01:58:53 +00:00
state.c Blasting old junk 1995-05-11 02:01:22 +00:00
state.h Blasting old junk 1995-05-11 02:01:22 +00:00
stop-gdb.c Update FSF address. 1995-08-02 03:41:12 +00:00
stuff.c Update FSF address. 1995-08-02 03:41:12 +00:00
sun3-nat.c * coredep.c: Renamed to core-aout.c 1996-01-11 20:08:15 +00:00
sun386-nat.c * coredep.c: Renamed to core-aout.c 1996-01-11 20:08:15 +00:00
symfile.c * symfile.c (generic_load): Initialize data_count properly. 1996-04-05 03:07:54 +00:00
symfile.h * bcache.c, bcache.h: New files to implement a byte cache. 1996-02-16 22:14:47 +00:00
symm-nat.c Update FSF address. 1995-08-02 03:41:12 +00:00
symm-tdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
symmisc.c * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
symtab.c * mdebugread.c (mylookup_symbol): enum namespace becomes 1996-01-04 19:07:28 +00:00
symtab.h * bcache.c, bcache.h: New files to implement a byte cache. 1996-02-16 22:14:47 +00:00
tahoe-tdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
target.c * fork-child.c (fork_inferior), inferior.h: init_trace_fun now 1996-05-06 21:27:37 +00:00
target.h * breakpoint.c, target.h: Move defaults of watchpoint related 1995-05-22 15:29:00 +00:00
terminal.h Sat Oct 28 23:51:48 1995 steve chamberlain <sac@slash.cygnus.com> 1995-10-29 06:58:26 +00:00
thread.c * Makefile.in, breakpoint.c, corelow.c, fork-child.c, inflow.c, 1996-05-09 21:24:20 +00:00
tm-68k-fp.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-68k-nofp.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-68k-noun.h Remove a few remaining underscore/no-underscore remnants from config files. 1993-03-14 10:49:01 +00:00
tm-68k-un.h Remove a few remaining underscore/no-underscore remnants from config files. 1993-03-14 10:49:01 +00:00
tm-amix.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-delta88.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-es1800.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-h8300.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-h8500.h * findvar.c (read_register, write_register): Make these capable 1993-03-25 22:34:26 +00:00
tm-hppa.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-hppab.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-hppabsd.h recording file death 1992-12-08 04:59:31 +00:00
tm-hppah.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-hppahpux.h recording file death 1992-12-08 04:59:31 +00:00
tm-i386bsd.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-i386v4.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-i860.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-irix3.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-linux.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-os68k.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-rs6000.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-spc-em.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-spc-noun.h Remove a few remaining underscore/no-underscore remnants from config files. 1993-03-14 10:49:01 +00:00
tm-spc-un.h Remove a few remaining underscore/no-underscore remnants from config files. 1993-03-14 10:49:01 +00:00
tm-st2000.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-stratus.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-sun4os5.h recording file death 1992-12-08 04:59:31 +00:00
tm-sun4sol2.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-svr4.h recording file death 1992-12-08 04:59:31 +00:00
tm-sysv4.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-ultra3.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
tm-z8k.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
TODO * coredep.c: Renamed to core-aout.c 1996-01-11 20:08:15 +00:00
top.c * defs.h (read_command_lines, query_hook): Update prototypes. 1996-05-20 02:05:55 +00:00
top.h Update FSF address. 1995-08-02 03:41:12 +00:00
typeprint.c * f-typeprint.c, valarith.c, valprint.c, typeprint.c, eval.c: 1995-11-30 02:32:29 +00:00
typeprint.h Update FSF address. 1995-08-02 03:41:12 +00:00
ultra3-nat.c * coredep.c: Renamed to core-aout.c 1996-01-11 20:08:15 +00:00
ultra3-xdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
umax-xdep.c * Makefile.in (COMMON_OBS): Use corefile.o rather than core.o 1995-11-05 00:58:57 +00:00
utils.c * remote-nindy.c (nindy_open): Acquire more target state so that 1996-04-13 21:33:59 +00:00
valarith.c * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
valops.c * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
valprint.c * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
valprint.h Update FSF address. 1995-08-02 03:41:12 +00:00
value.h * valops.c (value_arg_coerce): Now takes param_type argument. 1995-02-12 18:51:42 +00:00
values.c * core-aout.c (fetch_core_registers): Cast core_reg_size to int 1996-03-30 05:45:10 +00:00
vax-tdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
w65-tdep.c Update FSF address. 1995-08-02 03:41:12 +00:00
w89k-rom.c Update FSF address. 1995-08-02 03:41:12 +00:00
win32-nat.c * Makefile.in, breakpoint.c, corelow.c, fork-child.c, inflow.c, 1996-05-09 21:24:20 +00:00
win32.c * NEWS: Add information about win32 and arm code. 1995-10-09 21:54:26 +00:00
xcoffexec.c * exec.c: Merge in RS6000 support from xcoffexec.c. 1994-10-13 01:16:19 +00:00
xcoffread.c * breakpoint.c (clear_momentary_breakpoints): Remove dead code 1996-05-08 23:34:34 +00:00
xcoffsolib.c * Makefile.in (rs6000-nat.o): Dependant on xcoffsolib.h. 1996-05-02 01:32:41 +00:00
xcoffsolib.h * Makefile.in (rs6000-nat.o): Dependant on xcoffsolib.h. 1996-05-02 01:32:41 +00:00
xm-amix.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-apollo68b.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-apollo68v.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-delta88.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-go32.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-hppab.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-hppabsd.h recording file death 1992-12-08 04:59:31 +00:00
xm-hppah.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-hppahpux.h recording file death 1992-12-08 04:59:31 +00:00
xm-i386bsd.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-i386mach.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-i386v4.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-i860.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-irix3.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-irix4.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-linux.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-m68k.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-rs6000.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-rtbsd.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-stratus.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-sun4os5.h recording file death 1992-12-08 04:59:31 +00:00
xm-sun4sol2.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-svr4.h recording file death 1992-12-08 04:59:31 +00:00
xm-sysv4.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-ultra3.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-vaxbsd.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-vaxult2.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xm-vaxult.h * nm-*, xm-*, tm-*: All native, host, and target files, which 1993-03-23 01:57:27 +00:00
xmodem.c Update FSF address. 1995-08-02 03:41:12 +00:00
xmodem.h Update FSF address. 1995-08-02 03:41:12 +00:00
z8k-tdep.c Update FSF address. 1995-08-02 03:41:12 +00:00

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

		      README for gdb-4.13 release
		    Updated 8-Aug-94 by Fred Fish

This is GDB, the GNU source-level debugger, presently running under un*x.
A summary of new features is in the file `NEWS'.


Unpacking and Installation -- quick overview
==========================

In this release, the GDB debugger sources, the generic GNU include
files, the BFD ("binary file description") library, the readline
library, and other libraries all have directories of their own
underneath the gdb-4.13 directory.  The idea is that a variety of GNU
tools can share a common copy of these things.  Be aware of variation
over time--for example don't try to build gdb with a copy of bfd from
a release other than the gdb release (such as a binutils or gas
release), especially if the releases are more than a few weeks apart.
Configuration scripts and makefiles exist to cruise up and down this
directory tree and automatically build all the pieces in the right
order.

When you unpack the gdb-4.13.tar.gz file, you'll find a directory
called `gdb-4.13', which contains:

  Makefile.in      config.sub*      glob/            opcodes/
  README           configure*       include/         readline/
  bfd/             configure.in     libiberty/       texinfo/
  config/          etc/             mmalloc/
  config.guess*    gdb/             move-if-change*

To build GDB, you can just do:

	cd gdb-4.13
	./configure
	make
	cp gdb/gdb /usr/local/bin/gdb	(or wherever you want)

This will configure and build all the libraries as well as GDB.
If `configure' can't determine your system type, specify one as its
argument, e.g. sun4 or decstation.

If you get compiler warnings during this stage, see the `Reporting Bugs'
section below; there are a few known problems.

GDB can be used as a cross-debugger, running on a machine of one type
while debugging a program running on a machine of another type.  See below.


More Documentation
******************

   The GDB 4 release includes an already-formatted reference card,
ready for printing with PostScript or Ghostscript, in the `gdb'
subdirectory of the main source directory.  (In `gdb-4.13/gdb/refcard.ps'.)
If you can use PostScript or Ghostscript with your printer, you can
print the reference card immediately with `refcard.ps'.

   The release also includes the source for the reference card.  You
can format it, using TeX, by typing:

     make refcard.dvi

   The GDB reference card is designed to print in landscape mode on US
"letter" size paper; that is, on a sheet 11 inches wide by 8.5 inches
high.  You will need to specify this form of printing as an option to
your DVI output program.

   All the documentation for GDB comes as part of the machine-readable
distribution.  The documentation is written in Texinfo format, which is
a documentation system that uses a single source file to produce both
on-line information and a printed manual.  You can use one of the Info
formatting commands to create the on-line version of the documentation
and TeX (or `texi2roff') to typeset the printed version.

   GDB includes an already formatted copy of the on-line Info version of
this manual in the `gdb' subdirectory.  The main Info file is
`gdb-VERSION-NUMBER/gdb/gdb.info', and it refers to subordinate files
matching `gdb.info*' in the same directory.  If necessary, you can
print out these files, or read them with any editor; but they are
easier to read using the `info' subsystem in GNU Emacs or the
standalone `info' program, available as part of the GNU Texinfo
distribution.

   If you want to format these Info files yourself, you need one of the
Info formatting programs, such as `texinfo-format-buffer' or `makeinfo'.

   If you have `makeinfo' installed, and are in the top level GDB
source directory (`gdb-4.13', in the case of version 4.13), you can make
the Info file by typing:

     cd gdb
     make gdb.info

   If you want to typeset and print copies of this manual, you need TeX,
a program to print its DVI output files, and `texinfo.tex', the Texinfo
definitions file.

   TeX is a typesetting program; it does not print files directly, but
produces output files called DVI files.  To print a typeset document,
you need a program to print DVI files.  If your system has TeX
installed, chances are it has such a program.  The precise command to
use depends on your system; `lpr -d' is common; another (for PostScript
devices) is `dvips'.  The DVI print command may require a file name
without any extension or a `.dvi' extension.

   TeX also requires a macro definitions file called `texinfo.tex'. 
This file tells TeX how to typeset a document written in Texinfo
format.  On its own, TeX cannot read, much less typeset a Texinfo file.
 `texinfo.tex' is distributed with GDB and is located in the
`gdb-VERSION-NUMBER/texinfo' directory.

   If you have TeX and a DVI printer program installed, you can typeset
and print this manual.  First switch to the the `gdb' subdirectory of
the main source directory (for example, to `gdb-4.13/gdb') and then type:

     make gdb.dvi


Installing GDB
**************

   GDB comes with a `configure' script that automates the process of
preparing GDB for installation; you can then use `make' to build the
`gdb' program.

   The GDB distribution includes all the source code you need for GDB in
a single directory, whose name is usually composed by appending the
version number to `gdb'.

   For example, the GDB version 4.13 distribution is in the `gdb-4.13'
directory.  That directory contains:

`gdb-4.13/configure (and supporting files)'
     script for configuring GDB and all its supporting libraries.

`gdb-4.13/gdb'
     the source specific to GDB itself

`gdb-4.13/bfd'
     source for the Binary File Descriptor library

`gdb-4.13/include'
     GNU include files

`gdb-4.13/libiberty'
     source for the `-liberty' free software library

`gdb-4.13/opcodes'
     source for the library of opcode tables and disassemblers

`gdb-4.13/readline'
     source for the GNU command-line interface

`gdb-4.13/glob'
     source for the GNU filename pattern-matching subroutine

`gdb-4.13/mmalloc'
     source for the GNU memory-mapped malloc package

'gdb-4.13/sim'
     source for some simulators (z8000, H8/300, H8/500, etc)

   The simplest way to configure and build GDB is to run `configure'
from the `gdb-VERSION-NUMBER' source directory, which in this example
is the `gdb-4.13' directory.

   First switch to the `gdb-VERSION-NUMBER' source directory if you are
not already in it; then run `configure'.  Pass the identifier for the
platform on which GDB will run as an argument.

   For example:

     cd gdb-4.13
     ./configure HOST
     make

where HOST is an identifier such as `sun4' or `decstation', that
identifies the platform where GDB will run.

   Running `configure HOST' followed by `make' builds the `bfd',
`readline', `mmalloc', and `libiberty' libraries, then `gdb' itself. 
The configured source files, and the binaries, are left in the
corresponding source directories.

   `configure' is a Bourne-shell (`/bin/sh') script; if your system
does not recognize this automatically when you run a different shell,
you may need to run `sh' on it explicitly:

     sh configure HOST

   If you run `configure' from a directory that contains source
directories for multiple libraries or programs, such as the `gdb-4.13'
source directory for version 4.13, `configure' creates configuration
files for every directory level underneath (unless you tell it not to,
with the `--norecursion' option).

   You can run the `configure' script from any of the subordinate
directories in the GDB distribution, if you only want to configure that
subdirectory; but be sure to specify a path to it.

   For example, with version 4.13, type the following to configure only
the `bfd' subdirectory:

     cd gdb-4.13/bfd
     ../configure HOST

   You can install `gdb' anywhere; it has no hardwired paths. However,
you should make sure that the shell on your path (named by the `SHELL'
environment variable) is publicly readable.  Remember that GDB uses the
shell to start your program--some systems refuse to let GDB debug child
processes whose programs are not readable.


Compiling GDB in another directory
==================================

   If you want to run GDB versions for several host or target machines,
you need a different `gdb' compiled for each combination of host and
target.  `configure' is designed to make this easy by allowing you to
generate each configuration in a separate subdirectory, rather than in
the source directory.  If your `make' program handles the `VPATH'
feature correctly (GNU `make' and SunOS 'make' are two that should),
running `make' in each of these directories builds the `gdb' program
specified there.

   To build `gdb' in a separate directory, run `configure' with the
`--srcdir' option to specify where to find the source. (You also need
to specify a path to find `configure' itself from your working
directory.  If the path to `configure' would be the same as the
argument to `--srcdir', you can leave out the `--srcdir' option; it
will be assumed.)

   For example, with version 4.13, you can build GDB in a separate
directory for a Sun 4 like this:

     cd gdb-4.13
     mkdir ../gdb-sun4
     cd ../gdb-sun4
     ../gdb-4.13/configure sun4
     make

   When `configure' builds a configuration using a remote source
directory, it creates a tree for the binaries with the same structure
(and using the same names) as the tree under the source directory.  In
the example, you'd find the Sun 4 library `libiberty.a' in the
directory `gdb-sun4/libiberty', and GDB itself in `gdb-sun4/gdb'.

   One popular reason to build several GDB configurations in separate
directories is to configure GDB for cross-compiling (where GDB runs on
one machine--the host--while debugging programs that run on another
machine--the target).  You specify a cross-debugging target by giving
the `--target=TARGET' option to `configure'.

   When you run `make' to build a program or library, you must run it
in a configured directory--whatever directory you were in when you
called `configure' (or one of its subdirectories).

   The `Makefile' that `configure' generates in each source directory
also runs recursively.  If you type `make' in a source directory such
as `gdb-4.13' (or in a separate configured directory configured with
`--srcdir=PATH/gdb-4.13'), you will build all the required libraries,
and then build GDB.

   When you have multiple hosts or targets configured in separate
directories, you can run `make' on them in parallel (for example, if
they are NFS-mounted on each of the hosts); they will not interfere
with each other.


Specifying names for hosts and targets
======================================

   The specifications used for hosts and targets in the `configure'
script are based on a three-part naming scheme, but some short
predefined aliases are also supported.  The full naming scheme encodes
three pieces of information in the following pattern:

     ARCHITECTURE-VENDOR-OS

   For example, you can use the alias `sun4' as a HOST argument or in a
`--target=TARGET' option.  The equivalent full name is
`sparc-sun-sunos4'.

   The `configure' script accompanying GDB does not provide any query
facility to list all supported host and target names or aliases. 
`configure' calls the Bourne shell script `config.sub' to map
abbreviations to full names; you can read the script, if you wish, or
you can use it to test your guesses on abbreviations--for example:

     % sh config.sub sun4
     sparc-sun-sunos411
     % sh config.sub sun3
     m68k-sun-sunos411
     % sh config.sub decstation
     mips-dec-ultrix42
     % sh config.sub hp300bsd
     m68k-hp-bsd
     % sh config.sub i386v
     i386-unknown-sysv
     % sh config.sub i786v
     Invalid configuration `i786v': machine `i786v' not recognized

`config.sub' is also distributed in the GDB source directory
(`gdb-4.13', for version 4.13).


`configure' options
===================

   Here is a summary of the `configure' options and arguments that are
most often useful for building GDB.  `configure' also has several other
options not listed here.  *note : (configure.info)What Configure Does,
for a full explanation of `configure'.

     configure [--help]
               [--prefix=DIR]
               [--srcdir=PATH]
               [--norecursion] [--rm]
               [--target=TARGET] HOST

You may introduce options with a single `-' rather than `--' if you
prefer; but you may abbreviate option names if you use `--'.

`--help'
     Display a quick summary of how to invoke `configure'.

`-prefix=DIR'
     Configure the source to install programs and files under directory
     `DIR'.

`--srcdir=PATH'
     *Warning: using this option requires GNU `make', or another `make'
     that compatibly implements the `VPATH' feature.*
     Use this option to make configurations in directories separate
     from the GDB source directories.  Among other things, you can use
     this to build (or maintain) several configurations simultaneously,
     in separate directories.  `configure' writes configuration
     specific files in the current directory, but arranges for them to
     use the source in the directory PATH.  `configure' will create
     directories under the working directory in parallel to the source
     directories below PATH.

`--norecursion'
     Configure only the directory level where `configure' is executed;
     do not propagate configuration to subdirectories.

`--rm'
     Remove the configuration that the other arguments specify.

`--target=TARGET'
     Configure GDB for cross-debugging programs running on the specified
     TARGET.  Without this option, GDB is configured to debug programs
     that run on the same machine (HOST) as GDB itself.

     There is no convenient way to generate a list of all available
     targets.

`HOST ...'
     Configure GDB to run on the specified HOST.

     There is no convenient way to generate a list of all available
     hosts.

`configure' accepts other options, for compatibility with configuring
other GNU tools recursively; but these are the only options that affect
GDB or its supporting libraries.


Languages other than C
=======================

See the GDB manual (doc/gdb.texinfo) for information on this.

Kernel debugging
=================

I have't done this myself so I can't really offer any advice.
Remote debugging over serial lines works fine, but the kernel debugging
code in here has not been tested in years.  Van Jacobson has
better kernel debugging, but the UC lawyers won't let FSF have it.


Remote debugging
=================

The files m68k-stub.c, i386-stub.c, and sparc-stub.c are examples of
remote stubs to be used with remote.c.  They are designed to run
standalone on an m68k, i386, or SPARC cpu and communicate properly with
the remote.c stub over a serial line.

The file rem-multi.shar contains a general stub that can probably
run on various different flavors of unix to allow debugging over a
serial line from one machine to another.

Some working remote interfaces for talking to existing ROM monitors
are:
	remote-adapt.c	 AMD 29000 "Adapt"
	remote-eb.c	 AMD 29000 "EBMON"
	remote-es1800.c	 Ericsson 1800 monitor
	remote-hms.c	 Hitachi Micro Systems H8/300 monitor
	remote-mips.c	 MIPS remote debugging protocol
	remote-mm.c	 AMD 29000 "minimon"
	remote-nindy.c   Intel 960 "Nindy"
	remote-sim.c	 Generalized simulator protocol
	remote-st2000.c	 Tandem ST-2000 monitor
	remote-udi.c	 AMD 29000 using the AMD "Universal Debug Interface"
	remote-vx.c	 VxWorks realtime kernel
	remote-z8k.c	 Zilog Z8000 simulator

Remote-vx.c and the vx-share subdirectory contain a remote interface for the
VxWorks realtime kernel, which communicates over TCP using the Sun
RPC library.  This would be a useful starting point for other remote-
via-ethernet back ends.

Remote-udi.c and the 29k-share subdirectory contain a remote interface
for AMD 29000 programs, which uses the AMD "Universal Debug Interface".
This allows GDB to talk to software simulators, emulators, and/or bare
hardware boards, via network or serial interfaces.  Note that GDB only
provides an interface that speaks UDI, not a complete solution.  You
will need something on the other end that also speaks UDI.


Reporting Bugs
===============

The correct address for reporting bugs found in gdb is
"bug-gdb@prep.ai.mit.edu".  Please email all bugs, and all requests for
help with GDB, to that address.  Please include the GDB version number
(e.g. gdb-4.13), and how you configured it (e.g. "sun4" or "mach386
host, i586-intel-synopsys target").  If you include the banner that GDB
prints when it starts up, that will give us enough information.

For more information on how/whether to report bugs, see the GDB Bugs
section of the GDB manual (gdb/doc/gdb.texinfo).

Known bugs:

  * Under Ultrix 4.2 (DECstation-3100) or Alphas under OSF/1, we have
    seen problems with backtraces after interrupting the inferior out
    of a read().  The problem is caused by ptrace() returning an
    incorrect value for the frame pointer register (register 15 or
    30).  As far as we can tell, this is a kernel problem.  Any help
    with this would be greatly appreciated.

  * On DECstations there are warnings about shift counts out of range in
    various BFD modules.  None of them is a cause for alarm, they are actually
    a result of bugs in the DECstation compiler.

  * Notes for the DEC Alpha using OSF/1:
    The debugging output of native cc has two known problems; we view these
    as compiler bugs.
    The linker miscompacts symbol tables, which causes gdb to confuse the
    type of variables or results in `struct <illegal>' type outputs.
    dbx has the same problems with those executables.  A workaround is to
    specify -Wl,-b when linking, but that will increase the executable size
    considerably.
    If a structure has incomplete type in one file (e.g. "struct foo *"
    without a definition for "struct foo"), gdb will be unable to find the
    structure definition from another file.
    It has been reported that the Ultrix 4.3A compiler on decstations has the
    same problems.

    Under some circumstances OSF/1 shared libraries do get relocated to a
    different address, but gdb cannot handle these relocations yet. If you
    encounter problems while debugging executables which use shared libraries,
    try to relink your executable with the -non_shared option when using cc
    or with the -static option when using gcc.

  * Notes for Solaris 2.x, using the SPARCworks cc compiler:
    You have to compile your program with the -xs option of the SPARCworks
    compiler to be able to debug your program with gdb.
    Under Solaris 2.3 you also need patch 101409-03 (Jumbo linker patch).
    Under Solaris 2.2, if you have patch 101052 installed, make sure
    that it is at least at revision 101052-06.

  * Notes for BSD/386:
    To compile gdb-4.13 on BSD/386, you must run the configure script and
    its subscripts with bash.  Here is an easy way to do this:

	bash -c 'CONFIG_SHELL=/bin/bash ./configure'

    (configure will report i386-unknown-bsd).  Then, compile with the
    standard "make" command.

GDB can produce warnings about symbols that it does not understand.  By
default, these warnings are disabled.  You can enable them by executing
`set complaint 10' (which you can put in your ~/.gdbinit if you like).
I recommend doing this if you are working on a compiler, assembler,
linker, or gdb, since it will point out problems that you may be able
to fix.  Warnings produced during symbol reading indicate some mismatch
between the object file and GDB's symbol reading code.  In many cases,
it's a mismatch between the specs for the object file format, and what
the compiler actually outputs or the debugger actually understands.


X Windows versus GDB
=====================

There is an "xxgdb", which seems to work for simple operations,
which was posted to comp.sources.x.

For those interested in auto display of source and the availability of
an editor while debugging I suggest trying gdb-mode in gnu-emacs
(Try typing M-x gdb RETURN).  Comments on this mode are welcome.


Writing Code for GDB
=====================

There is a lot of information about writing code for GDB in the
internals manual, distributed with GDB in gdb/doc/gdbint.texinfo.  You
can read it by hand, print it by using TeX and texinfo, or process it
into an `info' file for use with Emacs' info mode or the standalone
`info' program.  In particular, see the nodes Getting Started,
Debugging GDB, New Architectures, Coding Style, Clean Design, and
Submitting Patches.

If you are pondering writing anything but a short patch, especially
take note of the information about copyrights in the node Submitting
Patches.  It can take quite a while to get all the paperwork done, so
we encourage you to start that process as soon as you decide you are
planning to work on something, or at least well ahead of when you
think you will be ready to submit the patches.


GDB Testsuite
=============

There is a dejagnu based testsuite available for testing your newly
built GDB, or for regression testing GDBs with local modifications.
The testsuite is distributed separately from the base GDB distribution
for the convenience of people that wish to get either GDB or the testsuite
separately.

The name of the testsuite is gdb-4.13-testsuite.tar.gz.  You unpack it in the
same directory in which you unpacked the base GDB distribution, and it
will create and populate the directory gdb-4.13/gdb/testsuite.

Running the testsuite requires the prior installation of dejagnu, which
should be available via ftp.  Once dejagnu is installed, you can run
the tests in one of two ways:

  (1)	cd gdb-4.13/gdb		(assuming you also unpacked gdb)
	make check

or

  (2)	cd gdb-4.13/gdb/testsuite
	make		(builds the test executables)
	make site.exp	(builds the site specific file)
	runtest -tool gdb GDB=../gdb    (or GDB=<somepath> as appropriate)

The second method gives you slightly more control in case of problems with
building one or more test executables, in case you wish to remove some
test executables before running the tests, or if you are using the testsuite
'standalone', without it being part of the GDB source tree.

See the dejagnu documentation for further details.


(this is for editing this file with GNU emacs)
Local Variables:
mode: text
End: