mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-11-25 11:04:18 +08:00
01e175fe1b
When making inferior function calls GDB sets up a dummy code region on the stack, and places a breakpoint within that region. If the random stack contents appear to be a compressed instruction then GDB will place a compressed breakpoint, which can cause problems if the target doesn't support compressed instructions. This commit prevents this issue by writing a 4-byte nop instruction to the dummy region at the time the region is allocated. With this nop instruction in place, when we come to insert the breakpoint then an uncompressed breakpoint will be used. This is similar to other targets, for example mips. gdb/ChangeLog: * riscv-tdep.c (riscv_push_dummy_code): Write a 4-byte nop instruction to the dummy code region. gdb/testsuite/ChangeLog: * gdb.arch/riscv-bp-infcall.c: New file. * gdb.arch/riscv-bp-infcall.exp: New file.
3540 lines
113 KiB
C
3540 lines
113 KiB
C
/* Target-dependent code for the RISC-V architecture, for GDB.
|
|
|
|
Copyright (C) 2018-2019 Free Software Foundation, Inc.
|
|
|
|
This file is part of GDB.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
#include "defs.h"
|
|
#include "frame.h"
|
|
#include "inferior.h"
|
|
#include "symtab.h"
|
|
#include "value.h"
|
|
#include "gdbcmd.h"
|
|
#include "language.h"
|
|
#include "gdbcore.h"
|
|
#include "symfile.h"
|
|
#include "objfiles.h"
|
|
#include "gdbtypes.h"
|
|
#include "target.h"
|
|
#include "arch-utils.h"
|
|
#include "regcache.h"
|
|
#include "osabi.h"
|
|
#include "riscv-tdep.h"
|
|
#include "block.h"
|
|
#include "reggroups.h"
|
|
#include "opcode/riscv.h"
|
|
#include "elf/riscv.h"
|
|
#include "elf-bfd.h"
|
|
#include "symcat.h"
|
|
#include "dis-asm.h"
|
|
#include "frame-unwind.h"
|
|
#include "frame-base.h"
|
|
#include "trad-frame.h"
|
|
#include "infcall.h"
|
|
#include "floatformat.h"
|
|
#include "remote.h"
|
|
#include "target-descriptions.h"
|
|
#include "dwarf2-frame.h"
|
|
#include "user-regs.h"
|
|
#include "valprint.h"
|
|
#include "gdbsupport/common-defs.h"
|
|
#include "opcode/riscv-opc.h"
|
|
#include "cli/cli-decode.h"
|
|
#include "observable.h"
|
|
#include "prologue-value.h"
|
|
#include "arch/riscv.h"
|
|
|
|
/* The stack must be 16-byte aligned. */
|
|
#define SP_ALIGNMENT 16
|
|
|
|
/* The biggest alignment that the target supports. */
|
|
#define BIGGEST_ALIGNMENT 16
|
|
|
|
/* Define a series of is_XXX_insn functions to check if the value INSN
|
|
is an instance of instruction XXX. */
|
|
#define DECLARE_INSN(INSN_NAME, INSN_MATCH, INSN_MASK) \
|
|
static inline bool is_ ## INSN_NAME ## _insn (long insn) \
|
|
{ \
|
|
return (insn & INSN_MASK) == INSN_MATCH; \
|
|
}
|
|
#include "opcode/riscv-opc.h"
|
|
#undef DECLARE_INSN
|
|
|
|
/* Cached information about a frame. */
|
|
|
|
struct riscv_unwind_cache
|
|
{
|
|
/* The register from which we can calculate the frame base. This is
|
|
usually $sp or $fp. */
|
|
int frame_base_reg;
|
|
|
|
/* The offset from the current value in register FRAME_BASE_REG to the
|
|
actual frame base address. */
|
|
int frame_base_offset;
|
|
|
|
/* Information about previous register values. */
|
|
struct trad_frame_saved_reg *regs;
|
|
|
|
/* The id for this frame. */
|
|
struct frame_id this_id;
|
|
|
|
/* The base (stack) address for this frame. This is the stack pointer
|
|
value on entry to this frame before any adjustments are made. */
|
|
CORE_ADDR frame_base;
|
|
};
|
|
|
|
/* RISC-V specific register group for CSRs. */
|
|
|
|
static reggroup *csr_reggroup = NULL;
|
|
|
|
/* A set of registers that we expect to find in a tdesc_feature. These
|
|
are use in RISCV_GDBARCH_INIT when processing the target description. */
|
|
|
|
struct riscv_register_feature
|
|
{
|
|
/* Information for a single register. */
|
|
struct register_info
|
|
{
|
|
/* The GDB register number for this register. */
|
|
int regnum;
|
|
|
|
/* List of names for this register. The first name in this list is the
|
|
preferred name, the name GDB should use when describing this
|
|
register. */
|
|
std::vector <const char *> names;
|
|
|
|
/* When true this register is required in this feature set. */
|
|
bool required_p;
|
|
};
|
|
|
|
/* The name for this feature. This is the name used to find this feature
|
|
within the target description. */
|
|
const char *name;
|
|
|
|
/* List of all the registers that we expect that we might find in this
|
|
register set. */
|
|
std::vector <struct register_info> registers;
|
|
};
|
|
|
|
/* The general x-registers feature set. */
|
|
|
|
static const struct riscv_register_feature riscv_xreg_feature =
|
|
{
|
|
"org.gnu.gdb.riscv.cpu",
|
|
{
|
|
{ RISCV_ZERO_REGNUM + 0, { "zero", "x0" }, true },
|
|
{ RISCV_ZERO_REGNUM + 1, { "ra", "x1" }, true },
|
|
{ RISCV_ZERO_REGNUM + 2, { "sp", "x2" }, true },
|
|
{ RISCV_ZERO_REGNUM + 3, { "gp", "x3" }, true },
|
|
{ RISCV_ZERO_REGNUM + 4, { "tp", "x4" }, true },
|
|
{ RISCV_ZERO_REGNUM + 5, { "t0", "x5" }, true },
|
|
{ RISCV_ZERO_REGNUM + 6, { "t1", "x6" }, true },
|
|
{ RISCV_ZERO_REGNUM + 7, { "t2", "x7" }, true },
|
|
{ RISCV_ZERO_REGNUM + 8, { "fp", "x8", "s0" }, true },
|
|
{ RISCV_ZERO_REGNUM + 9, { "s1", "x9" }, true },
|
|
{ RISCV_ZERO_REGNUM + 10, { "a0", "x10" }, true },
|
|
{ RISCV_ZERO_REGNUM + 11, { "a1", "x11" }, true },
|
|
{ RISCV_ZERO_REGNUM + 12, { "a2", "x12" }, true },
|
|
{ RISCV_ZERO_REGNUM + 13, { "a3", "x13" }, true },
|
|
{ RISCV_ZERO_REGNUM + 14, { "a4", "x14" }, true },
|
|
{ RISCV_ZERO_REGNUM + 15, { "a5", "x15" }, true },
|
|
{ RISCV_ZERO_REGNUM + 16, { "a6", "x16" }, true },
|
|
{ RISCV_ZERO_REGNUM + 17, { "a7", "x17" }, true },
|
|
{ RISCV_ZERO_REGNUM + 18, { "s2", "x18" }, true },
|
|
{ RISCV_ZERO_REGNUM + 19, { "s3", "x19" }, true },
|
|
{ RISCV_ZERO_REGNUM + 20, { "s4", "x20" }, true },
|
|
{ RISCV_ZERO_REGNUM + 21, { "s5", "x21" }, true },
|
|
{ RISCV_ZERO_REGNUM + 22, { "s6", "x22" }, true },
|
|
{ RISCV_ZERO_REGNUM + 23, { "s7", "x23" }, true },
|
|
{ RISCV_ZERO_REGNUM + 24, { "s8", "x24" }, true },
|
|
{ RISCV_ZERO_REGNUM + 25, { "s9", "x25" }, true },
|
|
{ RISCV_ZERO_REGNUM + 26, { "s10", "x26" }, true },
|
|
{ RISCV_ZERO_REGNUM + 27, { "s11", "x27" }, true },
|
|
{ RISCV_ZERO_REGNUM + 28, { "t3", "x28" }, true },
|
|
{ RISCV_ZERO_REGNUM + 29, { "t4", "x29" }, true },
|
|
{ RISCV_ZERO_REGNUM + 30, { "t5", "x30" }, true },
|
|
{ RISCV_ZERO_REGNUM + 31, { "t6", "x31" }, true },
|
|
{ RISCV_ZERO_REGNUM + 32, { "pc" }, true }
|
|
}
|
|
};
|
|
|
|
/* The f-registers feature set. */
|
|
|
|
static const struct riscv_register_feature riscv_freg_feature =
|
|
{
|
|
"org.gnu.gdb.riscv.fpu",
|
|
{
|
|
{ RISCV_FIRST_FP_REGNUM + 0, { "ft0", "f0" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 1, { "ft1", "f1" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 2, { "ft2", "f2" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 3, { "ft3", "f3" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 4, { "ft4", "f4" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 5, { "ft5", "f5" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 6, { "ft6", "f6" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 7, { "ft7", "f7" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 8, { "fs0", "f8" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 9, { "fs1", "f9" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 10, { "fa0", "f10" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 11, { "fa1", "f11" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 12, { "fa2", "f12" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 13, { "fa3", "f13" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 14, { "fa4", "f14" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 15, { "fa5", "f15" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 16, { "fa6", "f16" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 17, { "fa7", "f17" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 18, { "fs2", "f18" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 19, { "fs3", "f19" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 20, { "fs4", "f20" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 21, { "fs5", "f21" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 22, { "fs6", "f22" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 23, { "fs7", "f23" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 24, { "fs8", "f24" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 25, { "fs9", "f25" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 26, { "fs10", "f26" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 27, { "fs11", "f27" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 28, { "ft8", "f28" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 29, { "ft9", "f29" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 30, { "ft10", "f30" }, true },
|
|
{ RISCV_FIRST_FP_REGNUM + 31, { "ft11", "f31" }, true },
|
|
|
|
{ RISCV_CSR_FFLAGS_REGNUM, { "fflags" }, true },
|
|
{ RISCV_CSR_FRM_REGNUM, { "frm" }, true },
|
|
{ RISCV_CSR_FCSR_REGNUM, { "fcsr" }, true },
|
|
|
|
}
|
|
};
|
|
|
|
/* Set of virtual registers. These are not physical registers on the
|
|
hardware, but might be available from the target. These are not pseudo
|
|
registers, reading these really does result in a register read from the
|
|
target, it is just that there might not be a physical register backing
|
|
the result. */
|
|
|
|
static const struct riscv_register_feature riscv_virtual_feature =
|
|
{
|
|
"org.gnu.gdb.riscv.virtual",
|
|
{
|
|
{ RISCV_PRIV_REGNUM, { "priv" }, false }
|
|
}
|
|
};
|
|
|
|
/* Feature set for CSRs. This set is NOT constant as the register names
|
|
list for each register is not complete. The aliases are computed
|
|
during RISCV_CREATE_CSR_ALIASES. */
|
|
|
|
static struct riscv_register_feature riscv_csr_feature =
|
|
{
|
|
"org.gnu.gdb.riscv.csr",
|
|
{
|
|
#define DECLARE_CSR(NAME,VALUE) \
|
|
{ RISCV_ ## VALUE ## _REGNUM, { # NAME }, false },
|
|
#include "opcode/riscv-opc.h"
|
|
#undef DECLARE_CSR
|
|
}
|
|
};
|
|
|
|
/* Complete RISCV_CSR_FEATURE, building the CSR alias names and adding them
|
|
to the name list for each register. */
|
|
|
|
static void
|
|
riscv_create_csr_aliases ()
|
|
{
|
|
for (auto ® : riscv_csr_feature.registers)
|
|
{
|
|
int csr_num = reg.regnum - RISCV_FIRST_CSR_REGNUM;
|
|
const char *alias = xstrprintf ("csr%d", csr_num);
|
|
reg.names.push_back (alias);
|
|
}
|
|
}
|
|
|
|
/* Controls whether we place compressed breakpoints or not. When in auto
|
|
mode GDB tries to determine if the target supports compressed
|
|
breakpoints, and uses them if it does. */
|
|
|
|
static enum auto_boolean use_compressed_breakpoints;
|
|
|
|
/* The show callback for 'show riscv use-compressed-breakpoints'. */
|
|
|
|
static void
|
|
show_use_compressed_breakpoints (struct ui_file *file, int from_tty,
|
|
struct cmd_list_element *c,
|
|
const char *value)
|
|
{
|
|
fprintf_filtered (file,
|
|
_("Debugger's use of compressed breakpoints is set "
|
|
"to %s.\n"), value);
|
|
}
|
|
|
|
/* The set and show lists for 'set riscv' and 'show riscv' prefixes. */
|
|
|
|
static struct cmd_list_element *setriscvcmdlist = NULL;
|
|
static struct cmd_list_element *showriscvcmdlist = NULL;
|
|
|
|
/* The show callback for the 'show riscv' prefix command. */
|
|
|
|
static void
|
|
show_riscv_command (const char *args, int from_tty)
|
|
{
|
|
help_list (showriscvcmdlist, "show riscv ", all_commands, gdb_stdout);
|
|
}
|
|
|
|
/* The set callback for the 'set riscv' prefix command. */
|
|
|
|
static void
|
|
set_riscv_command (const char *args, int from_tty)
|
|
{
|
|
printf_unfiltered
|
|
(_("\"set riscv\" must be followed by an appropriate subcommand.\n"));
|
|
help_list (setriscvcmdlist, "set riscv ", all_commands, gdb_stdout);
|
|
}
|
|
|
|
/* The set and show lists for 'set riscv' and 'show riscv' prefixes. */
|
|
|
|
static struct cmd_list_element *setdebugriscvcmdlist = NULL;
|
|
static struct cmd_list_element *showdebugriscvcmdlist = NULL;
|
|
|
|
/* The show callback for the 'show debug riscv' prefix command. */
|
|
|
|
static void
|
|
show_debug_riscv_command (const char *args, int from_tty)
|
|
{
|
|
help_list (showdebugriscvcmdlist, "show debug riscv ", all_commands, gdb_stdout);
|
|
}
|
|
|
|
/* The set callback for the 'set debug riscv' prefix command. */
|
|
|
|
static void
|
|
set_debug_riscv_command (const char *args, int from_tty)
|
|
{
|
|
printf_unfiltered
|
|
(_("\"set debug riscv\" must be followed by an appropriate subcommand.\n"));
|
|
help_list (setdebugriscvcmdlist, "set debug riscv ", all_commands, gdb_stdout);
|
|
}
|
|
|
|
/* The show callback for all 'show debug riscv VARNAME' variables. */
|
|
|
|
static void
|
|
show_riscv_debug_variable (struct ui_file *file, int from_tty,
|
|
struct cmd_list_element *c,
|
|
const char *value)
|
|
{
|
|
fprintf_filtered (file,
|
|
_("RiscV debug variable `%s' is set to: %s\n"),
|
|
c->name, value);
|
|
}
|
|
|
|
/* When this is set to non-zero debugging information about breakpoint
|
|
kinds will be printed. */
|
|
|
|
static unsigned int riscv_debug_breakpoints = 0;
|
|
|
|
/* When this is set to non-zero debugging information about inferior calls
|
|
will be printed. */
|
|
|
|
static unsigned int riscv_debug_infcall = 0;
|
|
|
|
/* When this is set to non-zero debugging information about stack unwinding
|
|
will be printed. */
|
|
|
|
static unsigned int riscv_debug_unwinder = 0;
|
|
|
|
/* When this is set to non-zero debugging information about gdbarch
|
|
initialisation will be printed. */
|
|
|
|
static unsigned int riscv_debug_gdbarch = 0;
|
|
|
|
/* See riscv-tdep.h. */
|
|
|
|
int
|
|
riscv_isa_xlen (struct gdbarch *gdbarch)
|
|
{
|
|
return gdbarch_tdep (gdbarch)->isa_features.xlen;
|
|
}
|
|
|
|
/* See riscv-tdep.h. */
|
|
|
|
int
|
|
riscv_abi_xlen (struct gdbarch *gdbarch)
|
|
{
|
|
return gdbarch_tdep (gdbarch)->abi_features.xlen;
|
|
}
|
|
|
|
/* See riscv-tdep.h. */
|
|
|
|
int
|
|
riscv_isa_flen (struct gdbarch *gdbarch)
|
|
{
|
|
return gdbarch_tdep (gdbarch)->isa_features.flen;
|
|
}
|
|
|
|
/* See riscv-tdep.h. */
|
|
|
|
int
|
|
riscv_abi_flen (struct gdbarch *gdbarch)
|
|
{
|
|
return gdbarch_tdep (gdbarch)->abi_features.flen;
|
|
}
|
|
|
|
/* Return true if the target for GDBARCH has floating point hardware. */
|
|
|
|
static bool
|
|
riscv_has_fp_regs (struct gdbarch *gdbarch)
|
|
{
|
|
return (riscv_isa_flen (gdbarch) > 0);
|
|
}
|
|
|
|
/* Return true if GDBARCH is using any of the floating point hardware ABIs. */
|
|
|
|
static bool
|
|
riscv_has_fp_abi (struct gdbarch *gdbarch)
|
|
{
|
|
return gdbarch_tdep (gdbarch)->abi_features.flen > 0;
|
|
}
|
|
|
|
/* Return true if REGNO is a floating pointer register. */
|
|
|
|
static bool
|
|
riscv_is_fp_regno_p (int regno)
|
|
{
|
|
return (regno >= RISCV_FIRST_FP_REGNUM
|
|
&& regno <= RISCV_LAST_FP_REGNUM);
|
|
}
|
|
|
|
/* Implement the breakpoint_kind_from_pc gdbarch method. */
|
|
|
|
static int
|
|
riscv_breakpoint_kind_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr)
|
|
{
|
|
if (use_compressed_breakpoints == AUTO_BOOLEAN_AUTO)
|
|
{
|
|
bool unaligned_p = false;
|
|
gdb_byte buf[1];
|
|
|
|
/* Some targets don't support unaligned reads. The address can only
|
|
be unaligned if the C extension is supported. So it is safe to
|
|
use a compressed breakpoint in this case. */
|
|
if (*pcptr & 0x2)
|
|
unaligned_p = true;
|
|
else
|
|
{
|
|
/* Read the opcode byte to determine the instruction length. If
|
|
the read fails this may be because we tried to set the
|
|
breakpoint at an invalid address, in this case we provide a
|
|
fake result which will give a breakpoint length of 4.
|
|
Hopefully when we try to actually insert the breakpoint we
|
|
will see a failure then too which will be reported to the
|
|
user. */
|
|
if (target_read_code (*pcptr, buf, 1) == -1)
|
|
buf[0] = 0;
|
|
read_code (*pcptr, buf, 1);
|
|
}
|
|
|
|
if (riscv_debug_breakpoints)
|
|
{
|
|
const char *bp = (unaligned_p || riscv_insn_length (buf[0]) == 2
|
|
? "C.EBREAK" : "EBREAK");
|
|
|
|
fprintf_unfiltered (gdb_stdlog, "Using %s for breakpoint at %s ",
|
|
bp, paddress (gdbarch, *pcptr));
|
|
if (unaligned_p)
|
|
fprintf_unfiltered (gdb_stdlog, "(unaligned address)\n");
|
|
else
|
|
fprintf_unfiltered (gdb_stdlog, "(instruction length %d)\n",
|
|
riscv_insn_length (buf[0]));
|
|
}
|
|
if (unaligned_p || riscv_insn_length (buf[0]) == 2)
|
|
return 2;
|
|
else
|
|
return 4;
|
|
}
|
|
else if (use_compressed_breakpoints == AUTO_BOOLEAN_TRUE)
|
|
return 2;
|
|
else
|
|
return 4;
|
|
}
|
|
|
|
/* Implement the sw_breakpoint_from_kind gdbarch method. */
|
|
|
|
static const gdb_byte *
|
|
riscv_sw_breakpoint_from_kind (struct gdbarch *gdbarch, int kind, int *size)
|
|
{
|
|
static const gdb_byte ebreak[] = { 0x73, 0x00, 0x10, 0x00, };
|
|
static const gdb_byte c_ebreak[] = { 0x02, 0x90 };
|
|
|
|
*size = kind;
|
|
switch (kind)
|
|
{
|
|
case 2:
|
|
return c_ebreak;
|
|
case 4:
|
|
return ebreak;
|
|
default:
|
|
gdb_assert_not_reached (_("unhandled breakpoint kind"));
|
|
}
|
|
}
|
|
|
|
/* Callback function for user_reg_add. */
|
|
|
|
static struct value *
|
|
value_of_riscv_user_reg (struct frame_info *frame, const void *baton)
|
|
{
|
|
const int *reg_p = (const int *) baton;
|
|
return value_of_register (*reg_p, frame);
|
|
}
|
|
|
|
/* Implement the register_name gdbarch method. This is used instead of
|
|
the function supplied by calling TDESC_USE_REGISTERS so that we can
|
|
ensure the preferred names are offered. */
|
|
|
|
static const char *
|
|
riscv_register_name (struct gdbarch *gdbarch, int regnum)
|
|
{
|
|
/* Lookup the name through the target description. If we get back NULL
|
|
then this is an unknown register. If we do get a name back then we
|
|
look up the registers preferred name below. */
|
|
const char *name = tdesc_register_name (gdbarch, regnum);
|
|
if (name == NULL || name[0] == '\0')
|
|
return NULL;
|
|
|
|
if (regnum >= RISCV_ZERO_REGNUM && regnum < RISCV_FIRST_FP_REGNUM)
|
|
{
|
|
gdb_assert (regnum < riscv_xreg_feature.registers.size ());
|
|
return riscv_xreg_feature.registers[regnum].names[0];
|
|
}
|
|
|
|
if (regnum >= RISCV_FIRST_FP_REGNUM && regnum <= RISCV_LAST_FP_REGNUM)
|
|
{
|
|
if (riscv_has_fp_regs (gdbarch))
|
|
{
|
|
regnum -= RISCV_FIRST_FP_REGNUM;
|
|
gdb_assert (regnum < riscv_freg_feature.registers.size ());
|
|
return riscv_freg_feature.registers[regnum].names[0];
|
|
}
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
/* Check that there's no gap between the set of registers handled above,
|
|
and the set of registers handled next. */
|
|
gdb_assert ((RISCV_LAST_FP_REGNUM + 1) == RISCV_FIRST_CSR_REGNUM);
|
|
|
|
if (regnum >= RISCV_FIRST_CSR_REGNUM && regnum <= RISCV_LAST_CSR_REGNUM)
|
|
{
|
|
#define DECLARE_CSR(NAME,VALUE) \
|
|
case RISCV_ ## VALUE ## _REGNUM: return # NAME;
|
|
|
|
switch (regnum)
|
|
{
|
|
#include "opcode/riscv-opc.h"
|
|
}
|
|
#undef DECLARE_CSR
|
|
}
|
|
|
|
if (regnum == RISCV_PRIV_REGNUM)
|
|
return "priv";
|
|
|
|
/* It is possible that that the target provides some registers that GDB
|
|
is unaware of, in that case just return the NAME from the target
|
|
description. */
|
|
return name;
|
|
}
|
|
|
|
/* Construct a type for 64-bit FP registers. */
|
|
|
|
static struct type *
|
|
riscv_fpreg_d_type (struct gdbarch *gdbarch)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
if (tdep->riscv_fpreg_d_type == nullptr)
|
|
{
|
|
const struct builtin_type *bt = builtin_type (gdbarch);
|
|
|
|
/* The type we're building is this: */
|
|
#if 0
|
|
union __gdb_builtin_type_fpreg_d
|
|
{
|
|
float f;
|
|
double d;
|
|
};
|
|
#endif
|
|
|
|
struct type *t;
|
|
|
|
t = arch_composite_type (gdbarch,
|
|
"__gdb_builtin_type_fpreg_d", TYPE_CODE_UNION);
|
|
append_composite_type_field (t, "float", bt->builtin_float);
|
|
append_composite_type_field (t, "double", bt->builtin_double);
|
|
TYPE_VECTOR (t) = 1;
|
|
TYPE_NAME (t) = "builtin_type_fpreg_d";
|
|
tdep->riscv_fpreg_d_type = t;
|
|
}
|
|
|
|
return tdep->riscv_fpreg_d_type;
|
|
}
|
|
|
|
/* Implement the register_type gdbarch method. This is installed as an
|
|
for the override setup by TDESC_USE_REGISTERS, for most registers we
|
|
delegate the type choice to the target description, but for a few
|
|
registers we try to improve the types if the target description has
|
|
taken a simplistic approach. */
|
|
|
|
static struct type *
|
|
riscv_register_type (struct gdbarch *gdbarch, int regnum)
|
|
{
|
|
struct type *type = tdesc_register_type (gdbarch, regnum);
|
|
int xlen = riscv_isa_xlen (gdbarch);
|
|
|
|
/* We want to perform some specific type "fixes" in cases where we feel
|
|
that we really can do better than the target description. For all
|
|
other cases we just return what the target description says. */
|
|
if (riscv_is_fp_regno_p (regnum))
|
|
{
|
|
/* This spots the case for RV64 where the double is defined as
|
|
either 'ieee_double' or 'float' (which is the generic name that
|
|
converts to 'double' on 64-bit). In these cases its better to
|
|
present the registers using a union type. */
|
|
int flen = riscv_isa_flen (gdbarch);
|
|
if (flen == 8
|
|
&& TYPE_CODE (type) == TYPE_CODE_FLT
|
|
&& TYPE_LENGTH (type) == flen
|
|
&& (strcmp (TYPE_NAME (type), "builtin_type_ieee_double") == 0
|
|
|| strcmp (TYPE_NAME (type), "double") == 0))
|
|
type = riscv_fpreg_d_type (gdbarch);
|
|
}
|
|
|
|
if ((regnum == gdbarch_pc_regnum (gdbarch)
|
|
|| regnum == RISCV_RA_REGNUM
|
|
|| regnum == RISCV_FP_REGNUM
|
|
|| regnum == RISCV_SP_REGNUM
|
|
|| regnum == RISCV_GP_REGNUM
|
|
|| regnum == RISCV_TP_REGNUM)
|
|
&& TYPE_CODE (type) == TYPE_CODE_INT
|
|
&& TYPE_LENGTH (type) == xlen)
|
|
{
|
|
/* This spots the case where some interesting registers are defined
|
|
as simple integers of the expected size, we force these registers
|
|
to be pointers as we believe that is more useful. */
|
|
if (regnum == gdbarch_pc_regnum (gdbarch)
|
|
|| regnum == RISCV_RA_REGNUM)
|
|
type = builtin_type (gdbarch)->builtin_func_ptr;
|
|
else if (regnum == RISCV_FP_REGNUM
|
|
|| regnum == RISCV_SP_REGNUM
|
|
|| regnum == RISCV_GP_REGNUM
|
|
|| regnum == RISCV_TP_REGNUM)
|
|
type = builtin_type (gdbarch)->builtin_data_ptr;
|
|
}
|
|
|
|
return type;
|
|
}
|
|
|
|
/* Helper for riscv_print_registers_info, prints info for a single register
|
|
REGNUM. */
|
|
|
|
static void
|
|
riscv_print_one_register_info (struct gdbarch *gdbarch,
|
|
struct ui_file *file,
|
|
struct frame_info *frame,
|
|
int regnum)
|
|
{
|
|
const char *name = gdbarch_register_name (gdbarch, regnum);
|
|
struct value *val;
|
|
struct type *regtype;
|
|
int print_raw_format;
|
|
enum tab_stops { value_column_1 = 15 };
|
|
|
|
fputs_filtered (name, file);
|
|
print_spaces_filtered (value_column_1 - strlen (name), file);
|
|
|
|
try
|
|
{
|
|
val = value_of_register (regnum, frame);
|
|
regtype = value_type (val);
|
|
}
|
|
catch (const gdb_exception_error &ex)
|
|
{
|
|
/* Handle failure to read a register without interrupting the entire
|
|
'info registers' flow. */
|
|
fprintf_filtered (file, "%s\n", ex.what ());
|
|
return;
|
|
}
|
|
|
|
print_raw_format = (value_entirely_available (val)
|
|
&& !value_optimized_out (val));
|
|
|
|
if (TYPE_CODE (regtype) == TYPE_CODE_FLT
|
|
|| (TYPE_CODE (regtype) == TYPE_CODE_UNION
|
|
&& TYPE_NFIELDS (regtype) == 2
|
|
&& TYPE_CODE (TYPE_FIELD_TYPE (regtype, 0)) == TYPE_CODE_FLT
|
|
&& TYPE_CODE (TYPE_FIELD_TYPE (regtype, 1)) == TYPE_CODE_FLT)
|
|
|| (TYPE_CODE (regtype) == TYPE_CODE_UNION
|
|
&& TYPE_NFIELDS (regtype) == 3
|
|
&& TYPE_CODE (TYPE_FIELD_TYPE (regtype, 0)) == TYPE_CODE_FLT
|
|
&& TYPE_CODE (TYPE_FIELD_TYPE (regtype, 1)) == TYPE_CODE_FLT
|
|
&& TYPE_CODE (TYPE_FIELD_TYPE (regtype, 2)) == TYPE_CODE_FLT))
|
|
{
|
|
struct value_print_options opts;
|
|
const gdb_byte *valaddr = value_contents_for_printing (val);
|
|
enum bfd_endian byte_order = gdbarch_byte_order (get_type_arch (regtype));
|
|
|
|
get_user_print_options (&opts);
|
|
opts.deref_ref = 1;
|
|
|
|
val_print (regtype,
|
|
value_embedded_offset (val), 0,
|
|
file, 0, val, &opts, current_language);
|
|
|
|
if (print_raw_format)
|
|
{
|
|
fprintf_filtered (file, "\t(raw ");
|
|
print_hex_chars (file, valaddr, TYPE_LENGTH (regtype), byte_order,
|
|
true);
|
|
fprintf_filtered (file, ")");
|
|
}
|
|
}
|
|
else
|
|
{
|
|
struct value_print_options opts;
|
|
|
|
/* Print the register in hex. */
|
|
get_formatted_print_options (&opts, 'x');
|
|
opts.deref_ref = 1;
|
|
val_print (regtype,
|
|
value_embedded_offset (val), 0,
|
|
file, 0, val, &opts, current_language);
|
|
|
|
if (print_raw_format)
|
|
{
|
|
if (regnum == RISCV_CSR_MSTATUS_REGNUM)
|
|
{
|
|
LONGEST d;
|
|
int size = register_size (gdbarch, regnum);
|
|
unsigned xlen;
|
|
|
|
/* The SD field is always in the upper bit of MSTATUS, regardless
|
|
of the number of bits in MSTATUS. */
|
|
d = value_as_long (val);
|
|
xlen = size * 8;
|
|
fprintf_filtered (file,
|
|
"\tSD:%X VM:%02X MXR:%X PUM:%X MPRV:%X XS:%X "
|
|
"FS:%X MPP:%x HPP:%X SPP:%X MPIE:%X HPIE:%X "
|
|
"SPIE:%X UPIE:%X MIE:%X HIE:%X SIE:%X UIE:%X",
|
|
(int) ((d >> (xlen - 1)) & 0x1),
|
|
(int) ((d >> 24) & 0x1f),
|
|
(int) ((d >> 19) & 0x1),
|
|
(int) ((d >> 18) & 0x1),
|
|
(int) ((d >> 17) & 0x1),
|
|
(int) ((d >> 15) & 0x3),
|
|
(int) ((d >> 13) & 0x3),
|
|
(int) ((d >> 11) & 0x3),
|
|
(int) ((d >> 9) & 0x3),
|
|
(int) ((d >> 8) & 0x1),
|
|
(int) ((d >> 7) & 0x1),
|
|
(int) ((d >> 6) & 0x1),
|
|
(int) ((d >> 5) & 0x1),
|
|
(int) ((d >> 4) & 0x1),
|
|
(int) ((d >> 3) & 0x1),
|
|
(int) ((d >> 2) & 0x1),
|
|
(int) ((d >> 1) & 0x1),
|
|
(int) ((d >> 0) & 0x1));
|
|
}
|
|
else if (regnum == RISCV_CSR_MISA_REGNUM)
|
|
{
|
|
int base;
|
|
unsigned xlen, i;
|
|
LONGEST d;
|
|
int size = register_size (gdbarch, regnum);
|
|
|
|
/* The MXL field is always in the upper two bits of MISA,
|
|
regardless of the number of bits in MISA. Mask out other
|
|
bits to ensure we have a positive value. */
|
|
d = value_as_long (val);
|
|
base = (d >> ((size * 8) - 2)) & 0x3;
|
|
xlen = 16;
|
|
|
|
for (; base > 0; base--)
|
|
xlen *= 2;
|
|
fprintf_filtered (file, "\tRV%d", xlen);
|
|
|
|
for (i = 0; i < 26; i++)
|
|
{
|
|
if (d & (1 << i))
|
|
fprintf_filtered (file, "%c", 'A' + i);
|
|
}
|
|
}
|
|
else if (regnum == RISCV_CSR_FCSR_REGNUM
|
|
|| regnum == RISCV_CSR_FFLAGS_REGNUM
|
|
|| regnum == RISCV_CSR_FRM_REGNUM)
|
|
{
|
|
LONGEST d;
|
|
|
|
d = value_as_long (val);
|
|
|
|
fprintf_filtered (file, "\t");
|
|
if (regnum != RISCV_CSR_FRM_REGNUM)
|
|
fprintf_filtered (file,
|
|
"RD:%01X NV:%d DZ:%d OF:%d UF:%d NX:%d",
|
|
(int) ((d >> 5) & 0x7),
|
|
(int) ((d >> 4) & 0x1),
|
|
(int) ((d >> 3) & 0x1),
|
|
(int) ((d >> 2) & 0x1),
|
|
(int) ((d >> 1) & 0x1),
|
|
(int) ((d >> 0) & 0x1));
|
|
|
|
if (regnum != RISCV_CSR_FFLAGS_REGNUM)
|
|
{
|
|
static const char * const sfrm[] =
|
|
{
|
|
"RNE (round to nearest; ties to even)",
|
|
"RTZ (Round towards zero)",
|
|
"RDN (Round down towards -INF)",
|
|
"RUP (Round up towards +INF)",
|
|
"RMM (Round to nearest; ties to max magnitude)",
|
|
"INVALID[5]",
|
|
"INVALID[6]",
|
|
"dynamic rounding mode",
|
|
};
|
|
int frm = ((regnum == RISCV_CSR_FCSR_REGNUM)
|
|
? (d >> 5) : d) & 0x3;
|
|
|
|
fprintf_filtered (file, "%sFRM:%i [%s]",
|
|
(regnum == RISCV_CSR_FCSR_REGNUM
|
|
? " " : ""),
|
|
frm, sfrm[frm]);
|
|
}
|
|
}
|
|
else if (regnum == RISCV_PRIV_REGNUM)
|
|
{
|
|
LONGEST d;
|
|
uint8_t priv;
|
|
|
|
d = value_as_long (val);
|
|
priv = d & 0xff;
|
|
|
|
if (priv < 4)
|
|
{
|
|
static const char * const sprv[] =
|
|
{
|
|
"User/Application",
|
|
"Supervisor",
|
|
"Hypervisor",
|
|
"Machine"
|
|
};
|
|
fprintf_filtered (file, "\tprv:%d [%s]",
|
|
priv, sprv[priv]);
|
|
}
|
|
else
|
|
fprintf_filtered (file, "\tprv:%d [INVALID]", priv);
|
|
}
|
|
else
|
|
{
|
|
/* If not a vector register, print it also according to its
|
|
natural format. */
|
|
if (TYPE_VECTOR (regtype) == 0)
|
|
{
|
|
get_user_print_options (&opts);
|
|
opts.deref_ref = 1;
|
|
fprintf_filtered (file, "\t");
|
|
val_print (regtype,
|
|
value_embedded_offset (val), 0,
|
|
file, 0, val, &opts, current_language);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
fprintf_filtered (file, "\n");
|
|
}
|
|
|
|
/* Return true if REGNUM is a valid CSR register. The CSR register space
|
|
is sparsely populated, so not every number is a named CSR. */
|
|
|
|
static bool
|
|
riscv_is_regnum_a_named_csr (int regnum)
|
|
{
|
|
gdb_assert (regnum >= RISCV_FIRST_CSR_REGNUM
|
|
&& regnum <= RISCV_LAST_CSR_REGNUM);
|
|
|
|
switch (regnum)
|
|
{
|
|
#define DECLARE_CSR(name, num) case RISCV_ ## num ## _REGNUM:
|
|
#include "opcode/riscv-opc.h"
|
|
#undef DECLARE_CSR
|
|
return true;
|
|
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
/* Implement the register_reggroup_p gdbarch method. Is REGNUM a member
|
|
of REGGROUP? */
|
|
|
|
static int
|
|
riscv_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
|
|
struct reggroup *reggroup)
|
|
{
|
|
/* Used by 'info registers' and 'info registers <groupname>'. */
|
|
|
|
if (gdbarch_register_name (gdbarch, regnum) == NULL
|
|
|| gdbarch_register_name (gdbarch, regnum)[0] == '\0')
|
|
return 0;
|
|
|
|
if (regnum > RISCV_LAST_REGNUM)
|
|
{
|
|
int ret = tdesc_register_in_reggroup_p (gdbarch, regnum, reggroup);
|
|
if (ret != -1)
|
|
return ret;
|
|
|
|
return default_register_reggroup_p (gdbarch, regnum, reggroup);
|
|
}
|
|
|
|
if (reggroup == all_reggroup)
|
|
{
|
|
if (regnum < RISCV_FIRST_CSR_REGNUM || regnum == RISCV_PRIV_REGNUM)
|
|
return 1;
|
|
if (riscv_is_regnum_a_named_csr (regnum))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
else if (reggroup == float_reggroup)
|
|
return (riscv_is_fp_regno_p (regnum)
|
|
|| regnum == RISCV_CSR_FCSR_REGNUM
|
|
|| regnum == RISCV_CSR_FFLAGS_REGNUM
|
|
|| regnum == RISCV_CSR_FRM_REGNUM);
|
|
else if (reggroup == general_reggroup)
|
|
return regnum < RISCV_FIRST_FP_REGNUM;
|
|
else if (reggroup == restore_reggroup || reggroup == save_reggroup)
|
|
{
|
|
if (riscv_has_fp_regs (gdbarch))
|
|
return (regnum <= RISCV_LAST_FP_REGNUM
|
|
|| regnum == RISCV_CSR_FCSR_REGNUM
|
|
|| regnum == RISCV_CSR_FFLAGS_REGNUM
|
|
|| regnum == RISCV_CSR_FRM_REGNUM);
|
|
else
|
|
return regnum < RISCV_FIRST_FP_REGNUM;
|
|
}
|
|
else if (reggroup == system_reggroup || reggroup == csr_reggroup)
|
|
{
|
|
if (regnum == RISCV_PRIV_REGNUM)
|
|
return 1;
|
|
if (regnum < RISCV_FIRST_CSR_REGNUM || regnum > RISCV_LAST_CSR_REGNUM)
|
|
return 0;
|
|
if (riscv_is_regnum_a_named_csr (regnum))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
else if (reggroup == vector_reggroup)
|
|
return 0;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
/* Implement the print_registers_info gdbarch method. This is used by
|
|
'info registers' and 'info all-registers'. */
|
|
|
|
static void
|
|
riscv_print_registers_info (struct gdbarch *gdbarch,
|
|
struct ui_file *file,
|
|
struct frame_info *frame,
|
|
int regnum, int print_all)
|
|
{
|
|
if (regnum != -1)
|
|
{
|
|
/* Print one specified register. */
|
|
if (gdbarch_register_name (gdbarch, regnum) == NULL
|
|
|| *(gdbarch_register_name (gdbarch, regnum)) == '\0')
|
|
error (_("Not a valid register for the current processor type"));
|
|
riscv_print_one_register_info (gdbarch, file, frame, regnum);
|
|
}
|
|
else
|
|
{
|
|
struct reggroup *reggroup;
|
|
|
|
if (print_all)
|
|
reggroup = all_reggroup;
|
|
else
|
|
reggroup = general_reggroup;
|
|
|
|
for (regnum = 0; regnum <= RISCV_LAST_REGNUM; ++regnum)
|
|
{
|
|
/* Zero never changes, so might as well hide by default. */
|
|
if (regnum == RISCV_ZERO_REGNUM && !print_all)
|
|
continue;
|
|
|
|
/* Registers with no name are not valid on this ISA. */
|
|
if (gdbarch_register_name (gdbarch, regnum) == NULL
|
|
|| *(gdbarch_register_name (gdbarch, regnum)) == '\0')
|
|
continue;
|
|
|
|
/* Is the register in the group we're interested in? */
|
|
if (!gdbarch_register_reggroup_p (gdbarch, regnum, reggroup))
|
|
continue;
|
|
|
|
riscv_print_one_register_info (gdbarch, file, frame, regnum);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Class that handles one decoded RiscV instruction. */
|
|
|
|
class riscv_insn
|
|
{
|
|
public:
|
|
|
|
/* Enum of all the opcodes that GDB cares about during the prologue scan. */
|
|
enum opcode
|
|
{
|
|
/* Unknown value is used at initialisation time. */
|
|
UNKNOWN = 0,
|
|
|
|
/* These instructions are all the ones we are interested in during the
|
|
prologue scan. */
|
|
ADD,
|
|
ADDI,
|
|
ADDIW,
|
|
ADDW,
|
|
AUIPC,
|
|
LUI,
|
|
SD,
|
|
SW,
|
|
/* These are needed for software breakopint support. */
|
|
JAL,
|
|
JALR,
|
|
BEQ,
|
|
BNE,
|
|
BLT,
|
|
BGE,
|
|
BLTU,
|
|
BGEU,
|
|
/* These are needed for stepping over atomic sequences. */
|
|
LR,
|
|
SC,
|
|
|
|
/* Other instructions are not interesting during the prologue scan, and
|
|
are ignored. */
|
|
OTHER
|
|
};
|
|
|
|
riscv_insn ()
|
|
: m_length (0),
|
|
m_opcode (OTHER),
|
|
m_rd (0),
|
|
m_rs1 (0),
|
|
m_rs2 (0)
|
|
{
|
|
/* Nothing. */
|
|
}
|
|
|
|
void decode (struct gdbarch *gdbarch, CORE_ADDR pc);
|
|
|
|
/* Get the length of the instruction in bytes. */
|
|
int length () const
|
|
{ return m_length; }
|
|
|
|
/* Get the opcode for this instruction. */
|
|
enum opcode opcode () const
|
|
{ return m_opcode; }
|
|
|
|
/* Get destination register field for this instruction. This is only
|
|
valid if the OPCODE implies there is such a field for this
|
|
instruction. */
|
|
int rd () const
|
|
{ return m_rd; }
|
|
|
|
/* Get the RS1 register field for this instruction. This is only valid
|
|
if the OPCODE implies there is such a field for this instruction. */
|
|
int rs1 () const
|
|
{ return m_rs1; }
|
|
|
|
/* Get the RS2 register field for this instruction. This is only valid
|
|
if the OPCODE implies there is such a field for this instruction. */
|
|
int rs2 () const
|
|
{ return m_rs2; }
|
|
|
|
/* Get the immediate for this instruction in signed form. This is only
|
|
valid if the OPCODE implies there is such a field for this
|
|
instruction. */
|
|
int imm_signed () const
|
|
{ return m_imm.s; }
|
|
|
|
private:
|
|
|
|
/* Extract 5 bit register field at OFFSET from instruction OPCODE. */
|
|
int decode_register_index (unsigned long opcode, int offset)
|
|
{
|
|
return (opcode >> offset) & 0x1F;
|
|
}
|
|
|
|
/* Extract 5 bit register field at OFFSET from instruction OPCODE. */
|
|
int decode_register_index_short (unsigned long opcode, int offset)
|
|
{
|
|
return ((opcode >> offset) & 0x7) + 8;
|
|
}
|
|
|
|
/* Helper for DECODE, decode 32-bit R-type instruction. */
|
|
void decode_r_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rd = decode_register_index (ival, OP_SH_RD);
|
|
m_rs1 = decode_register_index (ival, OP_SH_RS1);
|
|
m_rs2 = decode_register_index (ival, OP_SH_RS2);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 16-bit compressed R-type instruction. */
|
|
void decode_cr_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rd = m_rs1 = decode_register_index (ival, OP_SH_CRS1S);
|
|
m_rs2 = decode_register_index (ival, OP_SH_CRS2);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 32-bit I-type instruction. */
|
|
void decode_i_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rd = decode_register_index (ival, OP_SH_RD);
|
|
m_rs1 = decode_register_index (ival, OP_SH_RS1);
|
|
m_imm.s = EXTRACT_ITYPE_IMM (ival);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 16-bit compressed I-type instruction. */
|
|
void decode_ci_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rd = m_rs1 = decode_register_index (ival, OP_SH_CRS1S);
|
|
m_imm.s = EXTRACT_RVC_IMM (ival);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 32-bit S-type instruction. */
|
|
void decode_s_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rs1 = decode_register_index (ival, OP_SH_RS1);
|
|
m_rs2 = decode_register_index (ival, OP_SH_RS2);
|
|
m_imm.s = EXTRACT_STYPE_IMM (ival);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 16-bit CS-type instruction. The immediate
|
|
encoding is different for each CS format instruction, so extracting
|
|
the immediate is left up to the caller, who should pass the extracted
|
|
immediate value through in IMM. */
|
|
void decode_cs_type_insn (enum opcode opcode, ULONGEST ival, int imm)
|
|
{
|
|
m_opcode = opcode;
|
|
m_imm.s = imm;
|
|
m_rs1 = decode_register_index_short (ival, OP_SH_CRS1S);
|
|
m_rs2 = decode_register_index_short (ival, OP_SH_CRS2S);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 16-bit CSS-type instruction. The immediate
|
|
encoding is different for each CSS format instruction, so extracting
|
|
the immediate is left up to the caller, who should pass the extracted
|
|
immediate value through in IMM. */
|
|
void decode_css_type_insn (enum opcode opcode, ULONGEST ival, int imm)
|
|
{
|
|
m_opcode = opcode;
|
|
m_imm.s = imm;
|
|
m_rs1 = RISCV_SP_REGNUM;
|
|
/* Not a compressed register number in this case. */
|
|
m_rs2 = decode_register_index (ival, OP_SH_CRS2);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 32-bit U-type instruction. */
|
|
void decode_u_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rd = decode_register_index (ival, OP_SH_RD);
|
|
m_imm.s = EXTRACT_UTYPE_IMM (ival);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 32-bit J-type instruction. */
|
|
void decode_j_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rd = decode_register_index (ival, OP_SH_RD);
|
|
m_imm.s = EXTRACT_UJTYPE_IMM (ival);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 32-bit J-type instruction. */
|
|
void decode_cj_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_imm.s = EXTRACT_RVC_J_IMM (ival);
|
|
}
|
|
|
|
void decode_b_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rs1 = decode_register_index (ival, OP_SH_RS1);
|
|
m_rs2 = decode_register_index (ival, OP_SH_RS2);
|
|
m_imm.s = EXTRACT_SBTYPE_IMM (ival);
|
|
}
|
|
|
|
void decode_cb_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rs1 = decode_register_index_short (ival, OP_SH_CRS1S);
|
|
m_imm.s = EXTRACT_RVC_B_IMM (ival);
|
|
}
|
|
|
|
/* Fetch instruction from target memory at ADDR, return the content of
|
|
the instruction, and update LEN with the instruction length. */
|
|
static ULONGEST fetch_instruction (struct gdbarch *gdbarch,
|
|
CORE_ADDR addr, int *len);
|
|
|
|
/* The length of the instruction in bytes. Should be 2 or 4. */
|
|
int m_length;
|
|
|
|
/* The instruction opcode. */
|
|
enum opcode m_opcode;
|
|
|
|
/* The three possible registers an instruction might reference. Not
|
|
every instruction fills in all of these registers. Which fields are
|
|
valid depends on the opcode. The naming of these fields matches the
|
|
naming in the riscv isa manual. */
|
|
int m_rd;
|
|
int m_rs1;
|
|
int m_rs2;
|
|
|
|
/* Possible instruction immediate. This is only valid if the instruction
|
|
format contains an immediate, not all instruction, whether this is
|
|
valid depends on the opcode. Despite only having one format for now
|
|
the immediate is packed into a union, later instructions might require
|
|
an unsigned formatted immediate, having the union in place now will
|
|
reduce the need for code churn later. */
|
|
union riscv_insn_immediate
|
|
{
|
|
riscv_insn_immediate ()
|
|
: s (0)
|
|
{
|
|
/* Nothing. */
|
|
}
|
|
|
|
int s;
|
|
} m_imm;
|
|
};
|
|
|
|
/* Fetch instruction from target memory at ADDR, return the content of the
|
|
instruction, and update LEN with the instruction length. */
|
|
|
|
ULONGEST
|
|
riscv_insn::fetch_instruction (struct gdbarch *gdbarch,
|
|
CORE_ADDR addr, int *len)
|
|
{
|
|
enum bfd_endian byte_order = gdbarch_byte_order_for_code (gdbarch);
|
|
gdb_byte buf[8];
|
|
int instlen, status;
|
|
|
|
/* All insns are at least 16 bits. */
|
|
status = target_read_memory (addr, buf, 2);
|
|
if (status)
|
|
memory_error (TARGET_XFER_E_IO, addr);
|
|
|
|
/* If we need more, grab it now. */
|
|
instlen = riscv_insn_length (buf[0]);
|
|
gdb_assert (instlen <= sizeof (buf));
|
|
*len = instlen;
|
|
|
|
if (instlen > 2)
|
|
{
|
|
status = target_read_memory (addr + 2, buf + 2, instlen - 2);
|
|
if (status)
|
|
memory_error (TARGET_XFER_E_IO, addr + 2);
|
|
}
|
|
|
|
return extract_unsigned_integer (buf, instlen, byte_order);
|
|
}
|
|
|
|
/* Fetch from target memory an instruction at PC and decode it. This can
|
|
throw an error if the memory access fails, callers are responsible for
|
|
handling this error if that is appropriate. */
|
|
|
|
void
|
|
riscv_insn::decode (struct gdbarch *gdbarch, CORE_ADDR pc)
|
|
{
|
|
ULONGEST ival;
|
|
|
|
/* Fetch the instruction, and the instructions length. */
|
|
ival = fetch_instruction (gdbarch, pc, &m_length);
|
|
|
|
if (m_length == 4)
|
|
{
|
|
if (is_add_insn (ival))
|
|
decode_r_type_insn (ADD, ival);
|
|
else if (is_addw_insn (ival))
|
|
decode_r_type_insn (ADDW, ival);
|
|
else if (is_addi_insn (ival))
|
|
decode_i_type_insn (ADDI, ival);
|
|
else if (is_addiw_insn (ival))
|
|
decode_i_type_insn (ADDIW, ival);
|
|
else if (is_auipc_insn (ival))
|
|
decode_u_type_insn (AUIPC, ival);
|
|
else if (is_lui_insn (ival))
|
|
decode_u_type_insn (LUI, ival);
|
|
else if (is_sd_insn (ival))
|
|
decode_s_type_insn (SD, ival);
|
|
else if (is_sw_insn (ival))
|
|
decode_s_type_insn (SW, ival);
|
|
else if (is_jal_insn (ival))
|
|
decode_j_type_insn (JAL, ival);
|
|
else if (is_jalr_insn (ival))
|
|
decode_i_type_insn (JALR, ival);
|
|
else if (is_beq_insn (ival))
|
|
decode_b_type_insn (BEQ, ival);
|
|
else if (is_bne_insn (ival))
|
|
decode_b_type_insn (BNE, ival);
|
|
else if (is_blt_insn (ival))
|
|
decode_b_type_insn (BLT, ival);
|
|
else if (is_bge_insn (ival))
|
|
decode_b_type_insn (BGE, ival);
|
|
else if (is_bltu_insn (ival))
|
|
decode_b_type_insn (BLTU, ival);
|
|
else if (is_bgeu_insn (ival))
|
|
decode_b_type_insn (BGEU, ival);
|
|
else if (is_lr_w_insn (ival))
|
|
decode_r_type_insn (LR, ival);
|
|
else if (is_lr_d_insn (ival))
|
|
decode_r_type_insn (LR, ival);
|
|
else if (is_sc_w_insn (ival))
|
|
decode_r_type_insn (SC, ival);
|
|
else if (is_sc_d_insn (ival))
|
|
decode_r_type_insn (SC, ival);
|
|
else
|
|
/* None of the other fields are valid in this case. */
|
|
m_opcode = OTHER;
|
|
}
|
|
else if (m_length == 2)
|
|
{
|
|
int xlen = riscv_isa_xlen (gdbarch);
|
|
|
|
/* C_ADD and C_JALR have the same opcode. If RS2 is 0, then this is a
|
|
C_JALR. So must try to match C_JALR first as it has more bits in
|
|
mask. */
|
|
if (is_c_jalr_insn (ival))
|
|
decode_cr_type_insn (JALR, ival);
|
|
else if (is_c_add_insn (ival))
|
|
decode_cr_type_insn (ADD, ival);
|
|
/* C_ADDW is RV64 and RV128 only. */
|
|
else if (xlen != 4 && is_c_addw_insn (ival))
|
|
decode_cr_type_insn (ADDW, ival);
|
|
else if (is_c_addi_insn (ival))
|
|
decode_ci_type_insn (ADDI, ival);
|
|
/* C_ADDIW and C_JAL have the same opcode. C_ADDIW is RV64 and RV128
|
|
only and C_JAL is RV32 only. */
|
|
else if (xlen != 4 && is_c_addiw_insn (ival))
|
|
decode_ci_type_insn (ADDIW, ival);
|
|
else if (xlen == 4 && is_c_jal_insn (ival))
|
|
decode_cj_type_insn (JAL, ival);
|
|
/* C_ADDI16SP and C_LUI have the same opcode. If RD is 2, then this is a
|
|
C_ADDI16SP. So must try to match C_ADDI16SP first as it has more bits
|
|
in mask. */
|
|
else if (is_c_addi16sp_insn (ival))
|
|
{
|
|
m_opcode = ADDI;
|
|
m_rd = m_rs1 = decode_register_index (ival, OP_SH_RD);
|
|
m_imm.s = EXTRACT_RVC_ADDI16SP_IMM (ival);
|
|
}
|
|
else if (is_c_addi4spn_insn (ival))
|
|
{
|
|
m_opcode = ADDI;
|
|
m_rd = decode_register_index_short (ival, OP_SH_CRS2S);
|
|
m_rs1 = RISCV_SP_REGNUM;
|
|
m_imm.s = EXTRACT_RVC_ADDI4SPN_IMM (ival);
|
|
}
|
|
else if (is_c_lui_insn (ival))
|
|
{
|
|
m_opcode = LUI;
|
|
m_rd = decode_register_index (ival, OP_SH_CRS1S);
|
|
m_imm.s = EXTRACT_RVC_LUI_IMM (ival);
|
|
}
|
|
/* C_SD and C_FSW have the same opcode. C_SD is RV64 and RV128 only,
|
|
and C_FSW is RV32 only. */
|
|
else if (xlen != 4 && is_c_sd_insn (ival))
|
|
decode_cs_type_insn (SD, ival, EXTRACT_RVC_LD_IMM (ival));
|
|
else if (is_c_sw_insn (ival))
|
|
decode_cs_type_insn (SW, ival, EXTRACT_RVC_LW_IMM (ival));
|
|
else if (is_c_swsp_insn (ival))
|
|
decode_css_type_insn (SW, ival, EXTRACT_RVC_SWSP_IMM (ival));
|
|
else if (xlen != 4 && is_c_sdsp_insn (ival))
|
|
decode_css_type_insn (SW, ival, EXTRACT_RVC_SDSP_IMM (ival));
|
|
/* C_JR and C_MV have the same opcode. If RS2 is 0, then this is a C_JR.
|
|
So must try to match C_JR first as it ahs more bits in mask. */
|
|
else if (is_c_jr_insn (ival))
|
|
decode_cr_type_insn (JALR, ival);
|
|
else if (is_c_j_insn (ival))
|
|
decode_cj_type_insn (JAL, ival);
|
|
else if (is_c_beqz_insn (ival))
|
|
decode_cb_type_insn (BEQ, ival);
|
|
else if (is_c_bnez_insn (ival))
|
|
decode_cb_type_insn (BNE, ival);
|
|
else
|
|
/* None of the other fields of INSN are valid in this case. */
|
|
m_opcode = OTHER;
|
|
}
|
|
else
|
|
{
|
|
/* This must be a 6 or 8 byte instruction, we don't currently decode
|
|
any of these, so just ignore it. */
|
|
gdb_assert (m_length == 6 || m_length == 8);
|
|
m_opcode = OTHER;
|
|
}
|
|
}
|
|
|
|
/* The prologue scanner. This is currently only used for skipping the
|
|
prologue of a function when the DWARF information is not sufficient.
|
|
However, it is written with filling of the frame cache in mind, which
|
|
is why different groups of stack setup instructions are split apart
|
|
during the core of the inner loop. In the future, the intention is to
|
|
extend this function to fully support building up a frame cache that
|
|
can unwind register values when there is no DWARF information. */
|
|
|
|
static CORE_ADDR
|
|
riscv_scan_prologue (struct gdbarch *gdbarch,
|
|
CORE_ADDR start_pc, CORE_ADDR end_pc,
|
|
struct riscv_unwind_cache *cache)
|
|
{
|
|
CORE_ADDR cur_pc, next_pc, after_prologue_pc;
|
|
CORE_ADDR end_prologue_addr = 0;
|
|
|
|
/* Find an upper limit on the function prologue using the debug
|
|
information. If the debug information could not be used to provide
|
|
that bound, then use an arbitrary large number as the upper bound. */
|
|
after_prologue_pc = skip_prologue_using_sal (gdbarch, start_pc);
|
|
if (after_prologue_pc == 0)
|
|
after_prologue_pc = start_pc + 100; /* Arbitrary large number. */
|
|
if (after_prologue_pc < end_pc)
|
|
end_pc = after_prologue_pc;
|
|
|
|
pv_t regs[RISCV_NUM_INTEGER_REGS]; /* Number of GPR. */
|
|
for (int regno = 0; regno < RISCV_NUM_INTEGER_REGS; regno++)
|
|
regs[regno] = pv_register (regno, 0);
|
|
pv_area stack (RISCV_SP_REGNUM, gdbarch_addr_bit (gdbarch));
|
|
|
|
if (riscv_debug_unwinder)
|
|
fprintf_unfiltered
|
|
(gdb_stdlog,
|
|
"Prologue scan for function starting at %s (limit %s)\n",
|
|
core_addr_to_string (start_pc),
|
|
core_addr_to_string (end_pc));
|
|
|
|
for (next_pc = cur_pc = start_pc; cur_pc < end_pc; cur_pc = next_pc)
|
|
{
|
|
struct riscv_insn insn;
|
|
|
|
/* Decode the current instruction, and decide where the next
|
|
instruction lives based on the size of this instruction. */
|
|
insn.decode (gdbarch, cur_pc);
|
|
gdb_assert (insn.length () > 0);
|
|
next_pc = cur_pc + insn.length ();
|
|
|
|
/* Look for common stack adjustment insns. */
|
|
if ((insn.opcode () == riscv_insn::ADDI
|
|
|| insn.opcode () == riscv_insn::ADDIW)
|
|
&& insn.rd () == RISCV_SP_REGNUM
|
|
&& insn.rs1 () == RISCV_SP_REGNUM)
|
|
{
|
|
/* Handle: addi sp, sp, -i
|
|
or: addiw sp, sp, -i */
|
|
gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
|
|
gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
|
|
regs[insn.rd ()]
|
|
= pv_add_constant (regs[insn.rs1 ()], insn.imm_signed ());
|
|
}
|
|
else if ((insn.opcode () == riscv_insn::SW
|
|
|| insn.opcode () == riscv_insn::SD)
|
|
&& (insn.rs1 () == RISCV_SP_REGNUM
|
|
|| insn.rs1 () == RISCV_FP_REGNUM))
|
|
{
|
|
/* Handle: sw reg, offset(sp)
|
|
or: sd reg, offset(sp)
|
|
or: sw reg, offset(s0)
|
|
or: sd reg, offset(s0) */
|
|
/* Instruction storing a register onto the stack. */
|
|
gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
|
|
gdb_assert (insn.rs2 () < RISCV_NUM_INTEGER_REGS);
|
|
stack.store (pv_add_constant (regs[insn.rs1 ()], insn.imm_signed ()),
|
|
(insn.opcode () == riscv_insn::SW ? 4 : 8),
|
|
regs[insn.rs2 ()]);
|
|
}
|
|
else if (insn.opcode () == riscv_insn::ADDI
|
|
&& insn.rd () == RISCV_FP_REGNUM
|
|
&& insn.rs1 () == RISCV_SP_REGNUM)
|
|
{
|
|
/* Handle: addi s0, sp, size */
|
|
/* Instructions setting up the frame pointer. */
|
|
gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
|
|
gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
|
|
regs[insn.rd ()]
|
|
= pv_add_constant (regs[insn.rs1 ()], insn.imm_signed ());
|
|
}
|
|
else if ((insn.opcode () == riscv_insn::ADD
|
|
|| insn.opcode () == riscv_insn::ADDW)
|
|
&& insn.rd () == RISCV_FP_REGNUM
|
|
&& insn.rs1 () == RISCV_SP_REGNUM
|
|
&& insn.rs2 () == RISCV_ZERO_REGNUM)
|
|
{
|
|
/* Handle: add s0, sp, 0
|
|
or: addw s0, sp, 0 */
|
|
/* Instructions setting up the frame pointer. */
|
|
gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
|
|
gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
|
|
regs[insn.rd ()] = pv_add_constant (regs[insn.rs1 ()], 0);
|
|
}
|
|
else if ((insn.opcode () == riscv_insn::ADDI
|
|
&& insn.rd () == RISCV_ZERO_REGNUM
|
|
&& insn.rs1 () == RISCV_ZERO_REGNUM
|
|
&& insn.imm_signed () == 0))
|
|
{
|
|
/* Handle: add x0, x0, 0 (NOP) */
|
|
}
|
|
else if (insn.opcode () == riscv_insn::AUIPC)
|
|
{
|
|
gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
|
|
regs[insn.rd ()] = pv_constant (cur_pc + insn.imm_signed ());
|
|
}
|
|
else if (insn.opcode () == riscv_insn::LUI)
|
|
{
|
|
/* Handle: lui REG, n
|
|
Where REG is not gp register. */
|
|
gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
|
|
regs[insn.rd ()] = pv_constant (insn.imm_signed ());
|
|
}
|
|
else if (insn.opcode () == riscv_insn::ADDI)
|
|
{
|
|
/* Handle: addi REG1, REG2, IMM */
|
|
gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
|
|
gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
|
|
regs[insn.rd ()]
|
|
= pv_add_constant (regs[insn.rs1 ()], insn.imm_signed ());
|
|
}
|
|
else if (insn.opcode () == riscv_insn::ADD)
|
|
{
|
|
/* Handle: addi REG1, REG2, IMM */
|
|
gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
|
|
gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
|
|
gdb_assert (insn.rs2 () < RISCV_NUM_INTEGER_REGS);
|
|
regs[insn.rd ()] = pv_add (regs[insn.rs1 ()], regs[insn.rs2 ()]);
|
|
}
|
|
else
|
|
{
|
|
end_prologue_addr = cur_pc;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (end_prologue_addr == 0)
|
|
end_prologue_addr = cur_pc;
|
|
|
|
if (riscv_debug_unwinder)
|
|
fprintf_unfiltered (gdb_stdlog, "End of prologue at %s\n",
|
|
core_addr_to_string (end_prologue_addr));
|
|
|
|
if (cache != NULL)
|
|
{
|
|
/* Figure out if it is a frame pointer or just a stack pointer. Also
|
|
the offset held in the pv_t is from the original register value to
|
|
the current value, which for a grows down stack means a negative
|
|
value. The FRAME_BASE_OFFSET is the negation of this, how to get
|
|
from the current value to the original value. */
|
|
if (pv_is_register (regs[RISCV_FP_REGNUM], RISCV_SP_REGNUM))
|
|
{
|
|
cache->frame_base_reg = RISCV_FP_REGNUM;
|
|
cache->frame_base_offset = -regs[RISCV_FP_REGNUM].k;
|
|
}
|
|
else
|
|
{
|
|
cache->frame_base_reg = RISCV_SP_REGNUM;
|
|
cache->frame_base_offset = -regs[RISCV_SP_REGNUM].k;
|
|
}
|
|
|
|
/* Assign offset from old SP to all saved registers. As we don't
|
|
have the previous value for the frame base register at this
|
|
point, we store the offset as the address in the trad_frame, and
|
|
then convert this to an actual address later. */
|
|
for (int i = 0; i <= RISCV_NUM_INTEGER_REGS; i++)
|
|
{
|
|
CORE_ADDR offset;
|
|
if (stack.find_reg (gdbarch, i, &offset))
|
|
{
|
|
if (riscv_debug_unwinder)
|
|
{
|
|
/* Display OFFSET as a signed value, the offsets are from
|
|
the frame base address to the registers location on
|
|
the stack, with a descending stack this means the
|
|
offsets are always negative. */
|
|
fprintf_unfiltered (gdb_stdlog,
|
|
"Register $%s at stack offset %s\n",
|
|
gdbarch_register_name (gdbarch, i),
|
|
plongest ((LONGEST) offset));
|
|
}
|
|
trad_frame_set_addr (cache->regs, i, offset);
|
|
}
|
|
}
|
|
}
|
|
|
|
return end_prologue_addr;
|
|
}
|
|
|
|
/* Implement the riscv_skip_prologue gdbarch method. */
|
|
|
|
static CORE_ADDR
|
|
riscv_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
|
|
{
|
|
CORE_ADDR func_addr;
|
|
|
|
/* See if we can determine the end of the prologue via the symbol
|
|
table. If so, then return either PC, or the PC after the
|
|
prologue, whichever is greater. */
|
|
if (find_pc_partial_function (pc, NULL, &func_addr, NULL))
|
|
{
|
|
CORE_ADDR post_prologue_pc
|
|
= skip_prologue_using_sal (gdbarch, func_addr);
|
|
|
|
if (post_prologue_pc != 0)
|
|
return std::max (pc, post_prologue_pc);
|
|
}
|
|
|
|
/* Can't determine prologue from the symbol table, need to examine
|
|
instructions. Pass -1 for the end address to indicate the prologue
|
|
scanner can scan as far as it needs to find the end of the prologue. */
|
|
return riscv_scan_prologue (gdbarch, pc, ((CORE_ADDR) -1), NULL);
|
|
}
|
|
|
|
/* Implement the gdbarch push dummy code callback. */
|
|
|
|
static CORE_ADDR
|
|
riscv_push_dummy_code (struct gdbarch *gdbarch, CORE_ADDR sp,
|
|
CORE_ADDR funaddr, struct value **args, int nargs,
|
|
struct type *value_type, CORE_ADDR *real_pc,
|
|
CORE_ADDR *bp_addr, struct regcache *regcache)
|
|
{
|
|
/* A nop instruction is 'add x0, x0, 0'. */
|
|
static const gdb_byte nop_insn[] = { 0x13, 0x00, 0x00, 0x00 };
|
|
|
|
/* Allocate space for a breakpoint, and keep the stack correctly
|
|
aligned. The space allocated here must be at least big enough to
|
|
accommodate the NOP_INSN defined above. */
|
|
sp -= 16;
|
|
*bp_addr = sp;
|
|
*real_pc = funaddr;
|
|
|
|
/* When we insert a breakpoint we select whether to use a compressed
|
|
breakpoint or not based on the existing contents of the memory.
|
|
|
|
If the breakpoint is being placed onto the stack as part of setting up
|
|
for an inferior call from GDB, then the existing stack contents may
|
|
randomly appear to be a compressed instruction, causing GDB to insert
|
|
a compressed breakpoint. If this happens on a target that does not
|
|
support compressed instructions then this could cause problems.
|
|
|
|
To prevent this issue we write an uncompressed nop onto the stack at
|
|
the location where the breakpoint will be inserted. In this way we
|
|
ensure that we always use an uncompressed breakpoint, which should
|
|
work on all targets.
|
|
|
|
We call TARGET_WRITE_MEMORY here so that if the write fails we don't
|
|
throw an exception. Instead we ignore the error and move on. The
|
|
assumption is that either GDB will error later when actually trying to
|
|
insert a software breakpoint, or GDB will use hardware breakpoints and
|
|
there will be no need to write to memory later. */
|
|
int status = target_write_memory (*bp_addr, nop_insn, sizeof (nop_insn));
|
|
|
|
if (riscv_debug_breakpoints || riscv_debug_infcall)
|
|
fprintf_unfiltered (gdb_stdlog,
|
|
"Writing %lld-byte nop instruction to %s: %s\n",
|
|
((unsigned long long) sizeof (nop_insn)),
|
|
paddress (gdbarch, *bp_addr),
|
|
(status == 0 ? "success" : "failed"));
|
|
|
|
return sp;
|
|
}
|
|
|
|
/* Implement the gdbarch type alignment method, overrides the generic
|
|
alignment algorithm for anything that is RISC-V specific. */
|
|
|
|
static ULONGEST
|
|
riscv_type_align (gdbarch *gdbarch, type *type)
|
|
{
|
|
type = check_typedef (type);
|
|
if (TYPE_CODE (type) == TYPE_CODE_ARRAY && TYPE_VECTOR (type))
|
|
return std::min (TYPE_LENGTH (type), (ULONGEST) BIGGEST_ALIGNMENT);
|
|
|
|
/* Anything else will be aligned by the generic code. */
|
|
return 0;
|
|
}
|
|
|
|
/* Holds information about a single argument either being passed to an
|
|
inferior function, or returned from an inferior function. This includes
|
|
information about the size, type, etc of the argument, and also
|
|
information about how the argument will be passed (or returned). */
|
|
|
|
struct riscv_arg_info
|
|
{
|
|
/* Contents of the argument. */
|
|
const gdb_byte *contents;
|
|
|
|
/* Length of argument. */
|
|
int length;
|
|
|
|
/* Alignment required for an argument of this type. */
|
|
int align;
|
|
|
|
/* The type for this argument. */
|
|
struct type *type;
|
|
|
|
/* Each argument can have either 1 or 2 locations assigned to it. Each
|
|
location describes where part of the argument will be placed. The
|
|
second location is valid based on the LOC_TYPE and C_LENGTH fields
|
|
of the first location (which is always valid). */
|
|
struct location
|
|
{
|
|
/* What type of location this is. */
|
|
enum location_type
|
|
{
|
|
/* Argument passed in a register. */
|
|
in_reg,
|
|
|
|
/* Argument passed as an on stack argument. */
|
|
on_stack,
|
|
|
|
/* Argument passed by reference. The second location is always
|
|
valid for a BY_REF argument, and describes where the address
|
|
of the BY_REF argument should be placed. */
|
|
by_ref
|
|
} loc_type;
|
|
|
|
/* Information that depends on the location type. */
|
|
union
|
|
{
|
|
/* Which register number to use. */
|
|
int regno;
|
|
|
|
/* The offset into the stack region. */
|
|
int offset;
|
|
} loc_data;
|
|
|
|
/* The length of contents covered by this location. If this is less
|
|
than the total length of the argument, then the second location
|
|
will be valid, and will describe where the rest of the argument
|
|
will go. */
|
|
int c_length;
|
|
|
|
/* The offset within CONTENTS for this part of the argument. Will
|
|
always be 0 for the first part. For the second part of the
|
|
argument, this might be the C_LENGTH value of the first part,
|
|
however, if we are passing a structure in two registers, and there's
|
|
is padding between the first and second field, then this offset
|
|
might be greater than the length of the first argument part. When
|
|
the second argument location is not holding part of the argument
|
|
value, but is instead holding the address of a reference argument,
|
|
then this offset will be set to 0. */
|
|
int c_offset;
|
|
} argloc[2];
|
|
|
|
/* TRUE if this is an unnamed argument. */
|
|
bool is_unnamed;
|
|
};
|
|
|
|
/* Information about a set of registers being used for passing arguments as
|
|
part of a function call. The register set must be numerically
|
|
sequential from NEXT_REGNUM to LAST_REGNUM. The register set can be
|
|
disabled from use by setting NEXT_REGNUM greater than LAST_REGNUM. */
|
|
|
|
struct riscv_arg_reg
|
|
{
|
|
riscv_arg_reg (int first, int last)
|
|
: next_regnum (first),
|
|
last_regnum (last)
|
|
{
|
|
/* Nothing. */
|
|
}
|
|
|
|
/* The GDB register number to use in this set. */
|
|
int next_regnum;
|
|
|
|
/* The last GDB register number to use in this set. */
|
|
int last_regnum;
|
|
};
|
|
|
|
/* Arguments can be passed as on stack arguments, or by reference. The
|
|
on stack arguments must be in a continuous region starting from $sp,
|
|
while the by reference arguments can be anywhere, but we'll put them
|
|
on the stack after (at higher address) the on stack arguments.
|
|
|
|
This might not be the right approach to take. The ABI is clear that
|
|
an argument passed by reference can be modified by the callee, which
|
|
us placing the argument (temporarily) onto the stack will not achieve
|
|
(changes will be lost). There's also the possibility that very large
|
|
arguments could overflow the stack.
|
|
|
|
This struct is used to track offset into these two areas for where
|
|
arguments are to be placed. */
|
|
struct riscv_memory_offsets
|
|
{
|
|
riscv_memory_offsets ()
|
|
: arg_offset (0),
|
|
ref_offset (0)
|
|
{
|
|
/* Nothing. */
|
|
}
|
|
|
|
/* Offset into on stack argument area. */
|
|
int arg_offset;
|
|
|
|
/* Offset into the pass by reference area. */
|
|
int ref_offset;
|
|
};
|
|
|
|
/* Holds information about where arguments to a call will be placed. This
|
|
is updated as arguments are added onto the call, and can be used to
|
|
figure out where the next argument should be placed. */
|
|
|
|
struct riscv_call_info
|
|
{
|
|
riscv_call_info (struct gdbarch *gdbarch)
|
|
: int_regs (RISCV_A0_REGNUM, RISCV_A0_REGNUM + 7),
|
|
float_regs (RISCV_FA0_REGNUM, RISCV_FA0_REGNUM + 7)
|
|
{
|
|
xlen = riscv_abi_xlen (gdbarch);
|
|
flen = riscv_abi_flen (gdbarch);
|
|
|
|
/* Disable use of floating point registers if needed. */
|
|
if (!riscv_has_fp_abi (gdbarch))
|
|
float_regs.next_regnum = float_regs.last_regnum + 1;
|
|
}
|
|
|
|
/* Track the memory areas used for holding in-memory arguments to a
|
|
call. */
|
|
struct riscv_memory_offsets memory;
|
|
|
|
/* Holds information about the next integer register to use for passing
|
|
an argument. */
|
|
struct riscv_arg_reg int_regs;
|
|
|
|
/* Holds information about the next floating point register to use for
|
|
passing an argument. */
|
|
struct riscv_arg_reg float_regs;
|
|
|
|
/* The XLEN and FLEN are copied in to this structure for convenience, and
|
|
are just the results of calling RISCV_ABI_XLEN and RISCV_ABI_FLEN. */
|
|
int xlen;
|
|
int flen;
|
|
};
|
|
|
|
/* Return the number of registers available for use as parameters in the
|
|
register set REG. Returned value can be 0 or more. */
|
|
|
|
static int
|
|
riscv_arg_regs_available (struct riscv_arg_reg *reg)
|
|
{
|
|
if (reg->next_regnum > reg->last_regnum)
|
|
return 0;
|
|
|
|
return (reg->last_regnum - reg->next_regnum + 1);
|
|
}
|
|
|
|
/* If there is at least one register available in the register set REG then
|
|
the next register from REG is assigned to LOC and the length field of
|
|
LOC is updated to LENGTH. The register set REG is updated to indicate
|
|
that the assigned register is no longer available and the function
|
|
returns true.
|
|
|
|
If there are no registers available in REG then the function returns
|
|
false, and LOC and REG are unchanged. */
|
|
|
|
static bool
|
|
riscv_assign_reg_location (struct riscv_arg_info::location *loc,
|
|
struct riscv_arg_reg *reg,
|
|
int length, int offset)
|
|
{
|
|
if (reg->next_regnum <= reg->last_regnum)
|
|
{
|
|
loc->loc_type = riscv_arg_info::location::in_reg;
|
|
loc->loc_data.regno = reg->next_regnum;
|
|
reg->next_regnum++;
|
|
loc->c_length = length;
|
|
loc->c_offset = offset;
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
/* Assign LOC a location as the next stack parameter, and update MEMORY to
|
|
record that an area of stack has been used to hold the parameter
|
|
described by LOC.
|
|
|
|
The length field of LOC is updated to LENGTH, the length of the
|
|
parameter being stored, and ALIGN is the alignment required by the
|
|
parameter, which will affect how memory is allocated out of MEMORY. */
|
|
|
|
static void
|
|
riscv_assign_stack_location (struct riscv_arg_info::location *loc,
|
|
struct riscv_memory_offsets *memory,
|
|
int length, int align)
|
|
{
|
|
loc->loc_type = riscv_arg_info::location::on_stack;
|
|
memory->arg_offset
|
|
= align_up (memory->arg_offset, align);
|
|
loc->loc_data.offset = memory->arg_offset;
|
|
memory->arg_offset += length;
|
|
loc->c_length = length;
|
|
|
|
/* Offset is always 0, either we're the first location part, in which
|
|
case we're reading content from the start of the argument, or we're
|
|
passing the address of a reference argument, so 0. */
|
|
loc->c_offset = 0;
|
|
}
|
|
|
|
/* Update AINFO, which describes an argument that should be passed or
|
|
returned using the integer ABI. The argloc fields within AINFO are
|
|
updated to describe the location in which the argument will be passed to
|
|
a function, or returned from a function.
|
|
|
|
The CINFO structure contains the ongoing call information, the holds
|
|
information such as which argument registers are remaining to be
|
|
assigned to parameter, and how much memory has been used by parameters
|
|
so far.
|
|
|
|
By examining the state of CINFO a suitable location can be selected,
|
|
and assigned to AINFO. */
|
|
|
|
static void
|
|
riscv_call_arg_scalar_int (struct riscv_arg_info *ainfo,
|
|
struct riscv_call_info *cinfo)
|
|
{
|
|
if (ainfo->length > (2 * cinfo->xlen))
|
|
{
|
|
/* Argument is going to be passed by reference. */
|
|
ainfo->argloc[0].loc_type
|
|
= riscv_arg_info::location::by_ref;
|
|
cinfo->memory.ref_offset
|
|
= align_up (cinfo->memory.ref_offset, ainfo->align);
|
|
ainfo->argloc[0].loc_data.offset = cinfo->memory.ref_offset;
|
|
cinfo->memory.ref_offset += ainfo->length;
|
|
ainfo->argloc[0].c_length = ainfo->length;
|
|
|
|
/* The second location for this argument is given over to holding the
|
|
address of the by-reference data. Pass 0 for the offset as this
|
|
is not part of the actual argument value. */
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[1],
|
|
&cinfo->int_regs,
|
|
cinfo->xlen, 0))
|
|
riscv_assign_stack_location (&ainfo->argloc[1],
|
|
&cinfo->memory, cinfo->xlen,
|
|
cinfo->xlen);
|
|
}
|
|
else
|
|
{
|
|
int len = std::min (ainfo->length, cinfo->xlen);
|
|
int align = std::max (ainfo->align, cinfo->xlen);
|
|
|
|
/* Unnamed arguments in registers that require 2*XLEN alignment are
|
|
passed in an aligned register pair. */
|
|
if (ainfo->is_unnamed && (align == cinfo->xlen * 2)
|
|
&& cinfo->int_regs.next_regnum & 1)
|
|
cinfo->int_regs.next_regnum++;
|
|
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->int_regs, len, 0))
|
|
riscv_assign_stack_location (&ainfo->argloc[0],
|
|
&cinfo->memory, len, align);
|
|
|
|
if (len < ainfo->length)
|
|
{
|
|
len = ainfo->length - len;
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[1],
|
|
&cinfo->int_regs, len,
|
|
cinfo->xlen))
|
|
riscv_assign_stack_location (&ainfo->argloc[1],
|
|
&cinfo->memory, len, cinfo->xlen);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Like RISCV_CALL_ARG_SCALAR_INT, except the argument described by AINFO
|
|
is being passed with the floating point ABI. */
|
|
|
|
static void
|
|
riscv_call_arg_scalar_float (struct riscv_arg_info *ainfo,
|
|
struct riscv_call_info *cinfo)
|
|
{
|
|
if (ainfo->length > cinfo->flen || ainfo->is_unnamed)
|
|
return riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
else
|
|
{
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->float_regs,
|
|
ainfo->length, 0))
|
|
return riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
}
|
|
}
|
|
|
|
/* Like RISCV_CALL_ARG_SCALAR_INT, except the argument described by AINFO
|
|
is a complex floating point argument, and is therefore handled
|
|
differently to other argument types. */
|
|
|
|
static void
|
|
riscv_call_arg_complex_float (struct riscv_arg_info *ainfo,
|
|
struct riscv_call_info *cinfo)
|
|
{
|
|
if (ainfo->length <= (2 * cinfo->flen)
|
|
&& riscv_arg_regs_available (&cinfo->float_regs) >= 2
|
|
&& !ainfo->is_unnamed)
|
|
{
|
|
bool result;
|
|
int len = ainfo->length / 2;
|
|
|
|
result = riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->float_regs, len, 0);
|
|
gdb_assert (result);
|
|
|
|
result = riscv_assign_reg_location (&ainfo->argloc[1],
|
|
&cinfo->float_regs, len, len);
|
|
gdb_assert (result);
|
|
}
|
|
else
|
|
return riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
}
|
|
|
|
/* A structure used for holding information about a structure type within
|
|
the inferior program. The RiscV ABI has special rules for handling some
|
|
structures with a single field or with two fields. The counting of
|
|
fields here is done after flattening out all nested structures. */
|
|
|
|
class riscv_struct_info
|
|
{
|
|
public:
|
|
riscv_struct_info ()
|
|
: m_number_of_fields (0),
|
|
m_types { nullptr, nullptr },
|
|
m_offsets { 0, 0 }
|
|
{
|
|
/* Nothing. */
|
|
}
|
|
|
|
/* Analyse TYPE descending into nested structures, count the number of
|
|
scalar fields and record the types of the first two fields found. */
|
|
void analyse (struct type *type)
|
|
{
|
|
analyse_inner (type, 0);
|
|
}
|
|
|
|
/* The number of scalar fields found in the analysed type. This is
|
|
currently only accurate if the value returned is 0, 1, or 2 as the
|
|
analysis stops counting when the number of fields is 3. This is
|
|
because the RiscV ABI only has special cases for 1 or 2 fields,
|
|
anything else we just don't care about. */
|
|
int number_of_fields () const
|
|
{ return m_number_of_fields; }
|
|
|
|
/* Return the type for scalar field INDEX within the analysed type. Will
|
|
return nullptr if there is no field at that index. Only INDEX values
|
|
0 and 1 can be requested as the RiscV ABI only has special cases for
|
|
structures with 1 or 2 fields. */
|
|
struct type *field_type (int index) const
|
|
{
|
|
gdb_assert (index < (sizeof (m_types) / sizeof (m_types[0])));
|
|
return m_types[index];
|
|
}
|
|
|
|
/* Return the offset of scalar field INDEX within the analysed type. Will
|
|
return 0 if there is no field at that index. Only INDEX values 0 and
|
|
1 can be requested as the RiscV ABI only has special cases for
|
|
structures with 1 or 2 fields. */
|
|
int field_offset (int index) const
|
|
{
|
|
gdb_assert (index < (sizeof (m_offsets) / sizeof (m_offsets[0])));
|
|
return m_offsets[index];
|
|
}
|
|
|
|
private:
|
|
/* The number of scalar fields found within the structure after recursing
|
|
into nested structures. */
|
|
int m_number_of_fields;
|
|
|
|
/* The types of the first two scalar fields found within the structure
|
|
after recursing into nested structures. */
|
|
struct type *m_types[2];
|
|
|
|
/* The offsets of the first two scalar fields found within the structure
|
|
after recursing into nested structures. */
|
|
int m_offsets[2];
|
|
|
|
/* Recursive core for ANALYSE, the OFFSET parameter tracks the byte
|
|
offset from the start of the top level structure being analysed. */
|
|
void analyse_inner (struct type *type, int offset);
|
|
};
|
|
|
|
/* See description in class declaration. */
|
|
|
|
void
|
|
riscv_struct_info::analyse_inner (struct type *type, int offset)
|
|
{
|
|
unsigned int count = TYPE_NFIELDS (type);
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < count; ++i)
|
|
{
|
|
if (TYPE_FIELD_LOC_KIND (type, i) != FIELD_LOC_KIND_BITPOS)
|
|
continue;
|
|
|
|
struct type *field_type = TYPE_FIELD_TYPE (type, i);
|
|
field_type = check_typedef (field_type);
|
|
int field_offset
|
|
= offset + TYPE_FIELD_BITPOS (type, i) / TARGET_CHAR_BIT;
|
|
|
|
switch (TYPE_CODE (field_type))
|
|
{
|
|
case TYPE_CODE_STRUCT:
|
|
analyse_inner (field_type, field_offset);
|
|
break;
|
|
|
|
default:
|
|
/* RiscV only flattens out structures. Anything else does not
|
|
need to be flattened, we just record the type, and when we
|
|
look at the analysis results we'll realise this is not a
|
|
structure we can special case, and pass the structure in
|
|
memory. */
|
|
if (m_number_of_fields < 2)
|
|
{
|
|
m_types[m_number_of_fields] = field_type;
|
|
m_offsets[m_number_of_fields] = field_offset;
|
|
}
|
|
m_number_of_fields++;
|
|
break;
|
|
}
|
|
|
|
/* RiscV only has special handling for structures with 1 or 2 scalar
|
|
fields, any more than that and the structure is just passed in
|
|
memory. We can safely drop out early when we find 3 or more
|
|
fields then. */
|
|
|
|
if (m_number_of_fields > 2)
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Like RISCV_CALL_ARG_SCALAR_INT, except the argument described by AINFO
|
|
is a structure. Small structures on RiscV have some special case
|
|
handling in order that the structure might be passed in register.
|
|
Larger structures are passed in memory. After assigning location
|
|
information to AINFO, CINFO will have been updated. */
|
|
|
|
static void
|
|
riscv_call_arg_struct (struct riscv_arg_info *ainfo,
|
|
struct riscv_call_info *cinfo)
|
|
{
|
|
if (riscv_arg_regs_available (&cinfo->float_regs) >= 1)
|
|
{
|
|
struct riscv_struct_info sinfo;
|
|
|
|
sinfo.analyse (ainfo->type);
|
|
if (sinfo.number_of_fields () == 1
|
|
&& TYPE_CODE (sinfo.field_type (0)) == TYPE_CODE_COMPLEX)
|
|
{
|
|
/* The following is similar to RISCV_CALL_ARG_COMPLEX_FLOAT,
|
|
except we use the type of the complex field instead of the
|
|
type from AINFO, and the first location might be at a non-zero
|
|
offset. */
|
|
if (TYPE_LENGTH (sinfo.field_type (0)) <= (2 * cinfo->flen)
|
|
&& riscv_arg_regs_available (&cinfo->float_regs) >= 2
|
|
&& !ainfo->is_unnamed)
|
|
{
|
|
bool result;
|
|
int len = TYPE_LENGTH (sinfo.field_type (0)) / 2;
|
|
int offset = sinfo.field_offset (0);
|
|
|
|
result = riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->float_regs, len,
|
|
offset);
|
|
gdb_assert (result);
|
|
|
|
result = riscv_assign_reg_location (&ainfo->argloc[1],
|
|
&cinfo->float_regs, len,
|
|
(offset + len));
|
|
gdb_assert (result);
|
|
}
|
|
else
|
|
riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
return;
|
|
}
|
|
|
|
if (sinfo.number_of_fields () == 1
|
|
&& TYPE_CODE (sinfo.field_type (0)) == TYPE_CODE_FLT)
|
|
{
|
|
/* The following is similar to RISCV_CALL_ARG_SCALAR_FLOAT,
|
|
except we use the type of the first scalar field instead of
|
|
the type from AINFO. Also the location might be at a non-zero
|
|
offset. */
|
|
if (TYPE_LENGTH (sinfo.field_type (0)) > cinfo->flen
|
|
|| ainfo->is_unnamed)
|
|
riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
else
|
|
{
|
|
int offset = sinfo.field_offset (0);
|
|
int len = TYPE_LENGTH (sinfo.field_type (0));
|
|
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->float_regs,
|
|
len, offset))
|
|
riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
}
|
|
return;
|
|
}
|
|
|
|
if (sinfo.number_of_fields () == 2
|
|
&& TYPE_CODE (sinfo.field_type (0)) == TYPE_CODE_FLT
|
|
&& TYPE_LENGTH (sinfo.field_type (0)) <= cinfo->flen
|
|
&& TYPE_CODE (sinfo.field_type (1)) == TYPE_CODE_FLT
|
|
&& TYPE_LENGTH (sinfo.field_type (1)) <= cinfo->flen
|
|
&& riscv_arg_regs_available (&cinfo->float_regs) >= 2)
|
|
{
|
|
int len0 = TYPE_LENGTH (sinfo.field_type (0));
|
|
int offset = sinfo.field_offset (0);
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->float_regs, len0, offset))
|
|
error (_("failed during argument setup"));
|
|
|
|
int len1 = TYPE_LENGTH (sinfo.field_type (1));
|
|
offset = sinfo.field_offset (1);
|
|
gdb_assert (len1 <= (TYPE_LENGTH (ainfo->type)
|
|
- TYPE_LENGTH (sinfo.field_type (0))));
|
|
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[1],
|
|
&cinfo->float_regs,
|
|
len1, offset))
|
|
error (_("failed during argument setup"));
|
|
return;
|
|
}
|
|
|
|
if (sinfo.number_of_fields () == 2
|
|
&& riscv_arg_regs_available (&cinfo->int_regs) >= 1
|
|
&& (TYPE_CODE (sinfo.field_type (0)) == TYPE_CODE_FLT
|
|
&& TYPE_LENGTH (sinfo.field_type (0)) <= cinfo->flen
|
|
&& is_integral_type (sinfo.field_type (1))
|
|
&& TYPE_LENGTH (sinfo.field_type (1)) <= cinfo->xlen))
|
|
{
|
|
int len0 = TYPE_LENGTH (sinfo.field_type (0));
|
|
int offset = sinfo.field_offset (0);
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->float_regs, len0, offset))
|
|
error (_("failed during argument setup"));
|
|
|
|
int len1 = TYPE_LENGTH (sinfo.field_type (1));
|
|
offset = sinfo.field_offset (1);
|
|
gdb_assert (len1 <= cinfo->xlen);
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[1],
|
|
&cinfo->int_regs, len1, offset))
|
|
error (_("failed during argument setup"));
|
|
return;
|
|
}
|
|
|
|
if (sinfo.number_of_fields () == 2
|
|
&& riscv_arg_regs_available (&cinfo->int_regs) >= 1
|
|
&& (is_integral_type (sinfo.field_type (0))
|
|
&& TYPE_LENGTH (sinfo.field_type (0)) <= cinfo->xlen
|
|
&& TYPE_CODE (sinfo.field_type (1)) == TYPE_CODE_FLT
|
|
&& TYPE_LENGTH (sinfo.field_type (1)) <= cinfo->flen))
|
|
{
|
|
int len0 = TYPE_LENGTH (sinfo.field_type (0));
|
|
int len1 = TYPE_LENGTH (sinfo.field_type (1));
|
|
|
|
gdb_assert (len0 <= cinfo->xlen);
|
|
gdb_assert (len1 <= cinfo->flen);
|
|
|
|
int offset = sinfo.field_offset (0);
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->int_regs, len0, offset))
|
|
error (_("failed during argument setup"));
|
|
|
|
offset = sinfo.field_offset (1);
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[1],
|
|
&cinfo->float_regs,
|
|
len1, offset))
|
|
error (_("failed during argument setup"));
|
|
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Non of the structure flattening cases apply, so we just pass using
|
|
the integer ABI. */
|
|
riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
}
|
|
|
|
/* Assign a location to call (or return) argument AINFO, the location is
|
|
selected from CINFO which holds information about what call argument
|
|
locations are available for use next. The TYPE is the type of the
|
|
argument being passed, this information is recorded into AINFO (along
|
|
with some additional information derived from the type). IS_UNNAMED
|
|
is true if this is an unnamed (stdarg) argument, this info is also
|
|
recorded into AINFO.
|
|
|
|
After assigning a location to AINFO, CINFO will have been updated. */
|
|
|
|
static void
|
|
riscv_arg_location (struct gdbarch *gdbarch,
|
|
struct riscv_arg_info *ainfo,
|
|
struct riscv_call_info *cinfo,
|
|
struct type *type, bool is_unnamed)
|
|
{
|
|
ainfo->type = type;
|
|
ainfo->length = TYPE_LENGTH (ainfo->type);
|
|
ainfo->align = type_align (ainfo->type);
|
|
ainfo->is_unnamed = is_unnamed;
|
|
ainfo->contents = nullptr;
|
|
ainfo->argloc[0].c_length = 0;
|
|
ainfo->argloc[1].c_length = 0;
|
|
|
|
switch (TYPE_CODE (ainfo->type))
|
|
{
|
|
case TYPE_CODE_INT:
|
|
case TYPE_CODE_BOOL:
|
|
case TYPE_CODE_CHAR:
|
|
case TYPE_CODE_RANGE:
|
|
case TYPE_CODE_ENUM:
|
|
case TYPE_CODE_PTR:
|
|
if (ainfo->length <= cinfo->xlen)
|
|
{
|
|
ainfo->type = builtin_type (gdbarch)->builtin_long;
|
|
ainfo->length = cinfo->xlen;
|
|
}
|
|
else if (ainfo->length <= (2 * cinfo->xlen))
|
|
{
|
|
ainfo->type = builtin_type (gdbarch)->builtin_long_long;
|
|
ainfo->length = 2 * cinfo->xlen;
|
|
}
|
|
|
|
/* Recalculate the alignment requirement. */
|
|
ainfo->align = type_align (ainfo->type);
|
|
riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
break;
|
|
|
|
case TYPE_CODE_FLT:
|
|
riscv_call_arg_scalar_float (ainfo, cinfo);
|
|
break;
|
|
|
|
case TYPE_CODE_COMPLEX:
|
|
riscv_call_arg_complex_float (ainfo, cinfo);
|
|
break;
|
|
|
|
case TYPE_CODE_STRUCT:
|
|
riscv_call_arg_struct (ainfo, cinfo);
|
|
break;
|
|
|
|
default:
|
|
riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Used for printing debug information about the call argument location in
|
|
INFO to STREAM. The addresses in SP_REFS and SP_ARGS are the base
|
|
addresses for the location of pass-by-reference and
|
|
arguments-on-the-stack memory areas. */
|
|
|
|
static void
|
|
riscv_print_arg_location (ui_file *stream, struct gdbarch *gdbarch,
|
|
struct riscv_arg_info *info,
|
|
CORE_ADDR sp_refs, CORE_ADDR sp_args)
|
|
{
|
|
fprintf_unfiltered (stream, "type: '%s', length: 0x%x, alignment: 0x%x",
|
|
TYPE_SAFE_NAME (info->type), info->length, info->align);
|
|
switch (info->argloc[0].loc_type)
|
|
{
|
|
case riscv_arg_info::location::in_reg:
|
|
fprintf_unfiltered
|
|
(stream, ", register %s",
|
|
gdbarch_register_name (gdbarch, info->argloc[0].loc_data.regno));
|
|
if (info->argloc[0].c_length < info->length)
|
|
{
|
|
switch (info->argloc[1].loc_type)
|
|
{
|
|
case riscv_arg_info::location::in_reg:
|
|
fprintf_unfiltered
|
|
(stream, ", register %s",
|
|
gdbarch_register_name (gdbarch,
|
|
info->argloc[1].loc_data.regno));
|
|
break;
|
|
|
|
case riscv_arg_info::location::on_stack:
|
|
fprintf_unfiltered (stream, ", on stack at offset 0x%x",
|
|
info->argloc[1].loc_data.offset);
|
|
break;
|
|
|
|
case riscv_arg_info::location::by_ref:
|
|
default:
|
|
/* The second location should never be a reference, any
|
|
argument being passed by reference just places its address
|
|
in the first location and is done. */
|
|
error (_("invalid argument location"));
|
|
break;
|
|
}
|
|
|
|
if (info->argloc[1].c_offset > info->argloc[0].c_length)
|
|
fprintf_unfiltered (stream, " (offset 0x%x)",
|
|
info->argloc[1].c_offset);
|
|
}
|
|
break;
|
|
|
|
case riscv_arg_info::location::on_stack:
|
|
fprintf_unfiltered (stream, ", on stack at offset 0x%x",
|
|
info->argloc[0].loc_data.offset);
|
|
break;
|
|
|
|
case riscv_arg_info::location::by_ref:
|
|
fprintf_unfiltered
|
|
(stream, ", by reference, data at offset 0x%x (%s)",
|
|
info->argloc[0].loc_data.offset,
|
|
core_addr_to_string (sp_refs + info->argloc[0].loc_data.offset));
|
|
if (info->argloc[1].loc_type
|
|
== riscv_arg_info::location::in_reg)
|
|
fprintf_unfiltered
|
|
(stream, ", address in register %s",
|
|
gdbarch_register_name (gdbarch, info->argloc[1].loc_data.regno));
|
|
else
|
|
{
|
|
gdb_assert (info->argloc[1].loc_type
|
|
== riscv_arg_info::location::on_stack);
|
|
fprintf_unfiltered
|
|
(stream, ", address on stack at offset 0x%x (%s)",
|
|
info->argloc[1].loc_data.offset,
|
|
core_addr_to_string (sp_args + info->argloc[1].loc_data.offset));
|
|
}
|
|
break;
|
|
|
|
default:
|
|
gdb_assert_not_reached (_("unknown argument location type"));
|
|
}
|
|
}
|
|
|
|
/* Implement the push dummy call gdbarch callback. */
|
|
|
|
static CORE_ADDR
|
|
riscv_push_dummy_call (struct gdbarch *gdbarch,
|
|
struct value *function,
|
|
struct regcache *regcache,
|
|
CORE_ADDR bp_addr,
|
|
int nargs,
|
|
struct value **args,
|
|
CORE_ADDR sp,
|
|
function_call_return_method return_method,
|
|
CORE_ADDR struct_addr)
|
|
{
|
|
int i;
|
|
CORE_ADDR sp_args, sp_refs;
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
|
|
struct riscv_arg_info *arg_info =
|
|
(struct riscv_arg_info *) alloca (nargs * sizeof (struct riscv_arg_info));
|
|
|
|
struct riscv_call_info call_info (gdbarch);
|
|
|
|
CORE_ADDR osp = sp;
|
|
|
|
struct type *ftype = check_typedef (value_type (function));
|
|
|
|
if (TYPE_CODE (ftype) == TYPE_CODE_PTR)
|
|
ftype = check_typedef (TYPE_TARGET_TYPE (ftype));
|
|
|
|
/* We'll use register $a0 if we're returning a struct. */
|
|
if (return_method == return_method_struct)
|
|
++call_info.int_regs.next_regnum;
|
|
|
|
for (i = 0; i < nargs; ++i)
|
|
{
|
|
struct value *arg_value;
|
|
struct type *arg_type;
|
|
struct riscv_arg_info *info = &arg_info[i];
|
|
|
|
arg_value = args[i];
|
|
arg_type = check_typedef (value_type (arg_value));
|
|
|
|
riscv_arg_location (gdbarch, info, &call_info, arg_type,
|
|
TYPE_VARARGS (ftype) && i >= TYPE_NFIELDS (ftype));
|
|
|
|
if (info->type != arg_type)
|
|
arg_value = value_cast (info->type, arg_value);
|
|
info->contents = value_contents (arg_value);
|
|
}
|
|
|
|
/* Adjust the stack pointer and align it. */
|
|
sp = sp_refs = align_down (sp - call_info.memory.ref_offset, SP_ALIGNMENT);
|
|
sp = sp_args = align_down (sp - call_info.memory.arg_offset, SP_ALIGNMENT);
|
|
|
|
if (riscv_debug_infcall > 0)
|
|
{
|
|
fprintf_unfiltered (gdb_stdlog, "dummy call args:\n");
|
|
fprintf_unfiltered (gdb_stdlog, ": floating point ABI %s in use\n",
|
|
(riscv_has_fp_abi (gdbarch) ? "is" : "is not"));
|
|
fprintf_unfiltered (gdb_stdlog, ": xlen: %d\n: flen: %d\n",
|
|
call_info.xlen, call_info.flen);
|
|
if (return_method == return_method_struct)
|
|
fprintf_unfiltered (gdb_stdlog,
|
|
"[*] struct return pointer in register $A0\n");
|
|
for (i = 0; i < nargs; ++i)
|
|
{
|
|
struct riscv_arg_info *info = &arg_info [i];
|
|
|
|
fprintf_unfiltered (gdb_stdlog, "[%2d] ", i);
|
|
riscv_print_arg_location (gdb_stdlog, gdbarch, info, sp_refs, sp_args);
|
|
fprintf_unfiltered (gdb_stdlog, "\n");
|
|
}
|
|
if (call_info.memory.arg_offset > 0
|
|
|| call_info.memory.ref_offset > 0)
|
|
{
|
|
fprintf_unfiltered (gdb_stdlog, " Original sp: %s\n",
|
|
core_addr_to_string (osp));
|
|
fprintf_unfiltered (gdb_stdlog, "Stack required (for args): 0x%x\n",
|
|
call_info.memory.arg_offset);
|
|
fprintf_unfiltered (gdb_stdlog, "Stack required (for refs): 0x%x\n",
|
|
call_info.memory.ref_offset);
|
|
fprintf_unfiltered (gdb_stdlog, " Stack allocated: %s\n",
|
|
core_addr_to_string_nz (osp - sp));
|
|
}
|
|
}
|
|
|
|
/* Now load the argument into registers, or onto the stack. */
|
|
|
|
if (return_method == return_method_struct)
|
|
{
|
|
gdb_byte buf[sizeof (LONGEST)];
|
|
|
|
store_unsigned_integer (buf, call_info.xlen, byte_order, struct_addr);
|
|
regcache->cooked_write (RISCV_A0_REGNUM, buf);
|
|
}
|
|
|
|
for (i = 0; i < nargs; ++i)
|
|
{
|
|
CORE_ADDR dst;
|
|
int second_arg_length = 0;
|
|
const gdb_byte *second_arg_data;
|
|
struct riscv_arg_info *info = &arg_info [i];
|
|
|
|
gdb_assert (info->length > 0);
|
|
|
|
switch (info->argloc[0].loc_type)
|
|
{
|
|
case riscv_arg_info::location::in_reg:
|
|
{
|
|
gdb_byte tmp [sizeof (ULONGEST)];
|
|
|
|
gdb_assert (info->argloc[0].c_length <= info->length);
|
|
/* FP values in FP registers must be NaN-boxed. */
|
|
if (riscv_is_fp_regno_p (info->argloc[0].loc_data.regno)
|
|
&& info->argloc[0].c_length < call_info.flen)
|
|
memset (tmp, -1, sizeof (tmp));
|
|
else
|
|
memset (tmp, 0, sizeof (tmp));
|
|
memcpy (tmp, (info->contents + info->argloc[0].c_offset),
|
|
info->argloc[0].c_length);
|
|
regcache->cooked_write (info->argloc[0].loc_data.regno, tmp);
|
|
second_arg_length =
|
|
(((info->argloc[0].c_length + info->argloc[0].c_offset) < info->length)
|
|
? info->argloc[1].c_length : 0);
|
|
second_arg_data = info->contents + info->argloc[1].c_offset;
|
|
}
|
|
break;
|
|
|
|
case riscv_arg_info::location::on_stack:
|
|
dst = sp_args + info->argloc[0].loc_data.offset;
|
|
write_memory (dst, info->contents, info->length);
|
|
second_arg_length = 0;
|
|
break;
|
|
|
|
case riscv_arg_info::location::by_ref:
|
|
dst = sp_refs + info->argloc[0].loc_data.offset;
|
|
write_memory (dst, info->contents, info->length);
|
|
|
|
second_arg_length = call_info.xlen;
|
|
second_arg_data = (gdb_byte *) &dst;
|
|
break;
|
|
|
|
default:
|
|
gdb_assert_not_reached (_("unknown argument location type"));
|
|
}
|
|
|
|
if (second_arg_length > 0)
|
|
{
|
|
switch (info->argloc[1].loc_type)
|
|
{
|
|
case riscv_arg_info::location::in_reg:
|
|
{
|
|
gdb_byte tmp [sizeof (ULONGEST)];
|
|
|
|
gdb_assert ((riscv_is_fp_regno_p (info->argloc[1].loc_data.regno)
|
|
&& second_arg_length <= call_info.flen)
|
|
|| second_arg_length <= call_info.xlen);
|
|
/* FP values in FP registers must be NaN-boxed. */
|
|
if (riscv_is_fp_regno_p (info->argloc[1].loc_data.regno)
|
|
&& second_arg_length < call_info.flen)
|
|
memset (tmp, -1, sizeof (tmp));
|
|
else
|
|
memset (tmp, 0, sizeof (tmp));
|
|
memcpy (tmp, second_arg_data, second_arg_length);
|
|
regcache->cooked_write (info->argloc[1].loc_data.regno, tmp);
|
|
}
|
|
break;
|
|
|
|
case riscv_arg_info::location::on_stack:
|
|
{
|
|
CORE_ADDR arg_addr;
|
|
|
|
arg_addr = sp_args + info->argloc[1].loc_data.offset;
|
|
write_memory (arg_addr, second_arg_data, second_arg_length);
|
|
break;
|
|
}
|
|
|
|
case riscv_arg_info::location::by_ref:
|
|
default:
|
|
/* The second location should never be a reference, any
|
|
argument being passed by reference just places its address
|
|
in the first location and is done. */
|
|
error (_("invalid argument location"));
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Set the dummy return value to bp_addr.
|
|
A dummy breakpoint will be setup to execute the call. */
|
|
|
|
if (riscv_debug_infcall > 0)
|
|
fprintf_unfiltered (gdb_stdlog, ": writing $ra = %s\n",
|
|
core_addr_to_string (bp_addr));
|
|
regcache_cooked_write_unsigned (regcache, RISCV_RA_REGNUM, bp_addr);
|
|
|
|
/* Finally, update the stack pointer. */
|
|
|
|
if (riscv_debug_infcall > 0)
|
|
fprintf_unfiltered (gdb_stdlog, ": writing $sp = %s\n",
|
|
core_addr_to_string (sp));
|
|
regcache_cooked_write_unsigned (regcache, RISCV_SP_REGNUM, sp);
|
|
|
|
return sp;
|
|
}
|
|
|
|
/* Implement the return_value gdbarch method. */
|
|
|
|
static enum return_value_convention
|
|
riscv_return_value (struct gdbarch *gdbarch,
|
|
struct value *function,
|
|
struct type *type,
|
|
struct regcache *regcache,
|
|
gdb_byte *readbuf,
|
|
const gdb_byte *writebuf)
|
|
{
|
|
struct riscv_call_info call_info (gdbarch);
|
|
struct riscv_arg_info info;
|
|
struct type *arg_type;
|
|
|
|
arg_type = check_typedef (type);
|
|
riscv_arg_location (gdbarch, &info, &call_info, arg_type, false);
|
|
|
|
if (riscv_debug_infcall > 0)
|
|
{
|
|
fprintf_unfiltered (gdb_stdlog, "riscv return value:\n");
|
|
fprintf_unfiltered (gdb_stdlog, "[R] ");
|
|
riscv_print_arg_location (gdb_stdlog, gdbarch, &info, 0, 0);
|
|
fprintf_unfiltered (gdb_stdlog, "\n");
|
|
}
|
|
|
|
if (readbuf != nullptr || writebuf != nullptr)
|
|
{
|
|
unsigned int arg_len;
|
|
struct value *abi_val;
|
|
gdb_byte *old_readbuf = nullptr;
|
|
int regnum;
|
|
|
|
/* We only do one thing at a time. */
|
|
gdb_assert (readbuf == nullptr || writebuf == nullptr);
|
|
|
|
/* In some cases the argument is not returned as the declared type,
|
|
and we need to cast to or from the ABI type in order to
|
|
correctly access the argument. When writing to the machine we
|
|
do the cast here, when reading from the machine the cast occurs
|
|
later, after extracting the value. As the ABI type can be
|
|
larger than the declared type, then the read or write buffers
|
|
passed in might be too small. Here we ensure that we are using
|
|
buffers of sufficient size. */
|
|
if (writebuf != nullptr)
|
|
{
|
|
struct value *arg_val = value_from_contents (arg_type, writebuf);
|
|
abi_val = value_cast (info.type, arg_val);
|
|
writebuf = value_contents_raw (abi_val);
|
|
}
|
|
else
|
|
{
|
|
abi_val = allocate_value (info.type);
|
|
old_readbuf = readbuf;
|
|
readbuf = value_contents_raw (abi_val);
|
|
}
|
|
arg_len = TYPE_LENGTH (info.type);
|
|
|
|
switch (info.argloc[0].loc_type)
|
|
{
|
|
/* Return value in register(s). */
|
|
case riscv_arg_info::location::in_reg:
|
|
{
|
|
regnum = info.argloc[0].loc_data.regno;
|
|
gdb_assert (info.argloc[0].c_length <= arg_len);
|
|
gdb_assert (info.argloc[0].c_length
|
|
<= register_size (gdbarch, regnum));
|
|
|
|
if (readbuf)
|
|
{
|
|
gdb_byte *ptr = readbuf + info.argloc[0].c_offset;
|
|
regcache->cooked_read_part (regnum, 0,
|
|
info.argloc[0].c_length,
|
|
ptr);
|
|
}
|
|
|
|
if (writebuf)
|
|
{
|
|
const gdb_byte *ptr = writebuf + info.argloc[0].c_offset;
|
|
regcache->cooked_write_part (regnum, 0,
|
|
info.argloc[0].c_length,
|
|
ptr);
|
|
}
|
|
|
|
/* A return value in register can have a second part in a
|
|
second register. */
|
|
if (info.argloc[1].c_length > 0)
|
|
{
|
|
switch (info.argloc[1].loc_type)
|
|
{
|
|
case riscv_arg_info::location::in_reg:
|
|
regnum = info.argloc[1].loc_data.regno;
|
|
|
|
gdb_assert ((info.argloc[0].c_length
|
|
+ info.argloc[1].c_length) <= arg_len);
|
|
gdb_assert (info.argloc[1].c_length
|
|
<= register_size (gdbarch, regnum));
|
|
|
|
if (readbuf)
|
|
{
|
|
readbuf += info.argloc[1].c_offset;
|
|
regcache->cooked_read_part (regnum, 0,
|
|
info.argloc[1].c_length,
|
|
readbuf);
|
|
}
|
|
|
|
if (writebuf)
|
|
{
|
|
writebuf += info.argloc[1].c_offset;
|
|
regcache->cooked_write_part (regnum, 0,
|
|
info.argloc[1].c_length,
|
|
writebuf);
|
|
}
|
|
break;
|
|
|
|
case riscv_arg_info::location::by_ref:
|
|
case riscv_arg_info::location::on_stack:
|
|
default:
|
|
error (_("invalid argument location"));
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
/* Return value by reference will have its address in A0. */
|
|
case riscv_arg_info::location::by_ref:
|
|
{
|
|
ULONGEST addr;
|
|
|
|
regcache_cooked_read_unsigned (regcache, RISCV_A0_REGNUM,
|
|
&addr);
|
|
if (readbuf != nullptr)
|
|
read_memory (addr, readbuf, info.length);
|
|
if (writebuf != nullptr)
|
|
write_memory (addr, writebuf, info.length);
|
|
}
|
|
break;
|
|
|
|
case riscv_arg_info::location::on_stack:
|
|
default:
|
|
error (_("invalid argument location"));
|
|
break;
|
|
}
|
|
|
|
/* This completes the cast from abi type back to the declared type
|
|
in the case that we are reading from the machine. See the
|
|
comment at the head of this block for more details. */
|
|
if (readbuf != nullptr)
|
|
{
|
|
struct value *arg_val = value_cast (arg_type, abi_val);
|
|
memcpy (old_readbuf, value_contents_raw (arg_val),
|
|
TYPE_LENGTH (arg_type));
|
|
}
|
|
}
|
|
|
|
switch (info.argloc[0].loc_type)
|
|
{
|
|
case riscv_arg_info::location::in_reg:
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
case riscv_arg_info::location::by_ref:
|
|
return RETURN_VALUE_ABI_RETURNS_ADDRESS;
|
|
case riscv_arg_info::location::on_stack:
|
|
default:
|
|
error (_("invalid argument location"));
|
|
}
|
|
}
|
|
|
|
/* Implement the frame_align gdbarch method. */
|
|
|
|
static CORE_ADDR
|
|
riscv_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
|
|
{
|
|
return align_down (addr, 16);
|
|
}
|
|
|
|
/* Generate, or return the cached frame cache for the RiscV frame
|
|
unwinder. */
|
|
|
|
static struct riscv_unwind_cache *
|
|
riscv_frame_cache (struct frame_info *this_frame, void **this_cache)
|
|
{
|
|
CORE_ADDR pc, start_addr;
|
|
struct riscv_unwind_cache *cache;
|
|
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
|
int numregs, regno;
|
|
|
|
if ((*this_cache) != NULL)
|
|
return (struct riscv_unwind_cache *) *this_cache;
|
|
|
|
cache = FRAME_OBSTACK_ZALLOC (struct riscv_unwind_cache);
|
|
cache->regs = trad_frame_alloc_saved_regs (this_frame);
|
|
(*this_cache) = cache;
|
|
|
|
/* Scan the prologue, filling in the cache. */
|
|
start_addr = get_frame_func (this_frame);
|
|
pc = get_frame_pc (this_frame);
|
|
riscv_scan_prologue (gdbarch, start_addr, pc, cache);
|
|
|
|
/* We can now calculate the frame base address. */
|
|
cache->frame_base
|
|
= (get_frame_register_signed (this_frame, cache->frame_base_reg)
|
|
+ cache->frame_base_offset);
|
|
if (riscv_debug_unwinder)
|
|
fprintf_unfiltered (gdb_stdlog, "Frame base is %s ($%s + 0x%x)\n",
|
|
core_addr_to_string (cache->frame_base),
|
|
gdbarch_register_name (gdbarch,
|
|
cache->frame_base_reg),
|
|
cache->frame_base_offset);
|
|
|
|
/* The prologue scanner sets the address of registers stored to the stack
|
|
as the offset of that register from the frame base. The prologue
|
|
scanner doesn't know the actual frame base value, and so is unable to
|
|
compute the exact address. We do now know the frame base value, so
|
|
update the address of registers stored to the stack. */
|
|
numregs = gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch);
|
|
for (regno = 0; regno < numregs; ++regno)
|
|
{
|
|
if (trad_frame_addr_p (cache->regs, regno))
|
|
cache->regs[regno].addr += cache->frame_base;
|
|
}
|
|
|
|
/* The previous $pc can be found wherever the $ra value can be found.
|
|
The previous $ra value is gone, this would have been stored be the
|
|
previous frame if required. */
|
|
cache->regs[gdbarch_pc_regnum (gdbarch)] = cache->regs[RISCV_RA_REGNUM];
|
|
trad_frame_set_unknown (cache->regs, RISCV_RA_REGNUM);
|
|
|
|
/* Build the frame id. */
|
|
cache->this_id = frame_id_build (cache->frame_base, start_addr);
|
|
|
|
/* The previous $sp value is the frame base value. */
|
|
trad_frame_set_value (cache->regs, gdbarch_sp_regnum (gdbarch),
|
|
cache->frame_base);
|
|
|
|
return cache;
|
|
}
|
|
|
|
/* Implement the this_id callback for RiscV frame unwinder. */
|
|
|
|
static void
|
|
riscv_frame_this_id (struct frame_info *this_frame,
|
|
void **prologue_cache,
|
|
struct frame_id *this_id)
|
|
{
|
|
struct riscv_unwind_cache *cache;
|
|
|
|
try
|
|
{
|
|
cache = riscv_frame_cache (this_frame, prologue_cache);
|
|
*this_id = cache->this_id;
|
|
}
|
|
catch (const gdb_exception_error &ex)
|
|
{
|
|
/* Ignore errors, this leaves the frame id as the predefined outer
|
|
frame id which terminates the backtrace at this point. */
|
|
}
|
|
}
|
|
|
|
/* Implement the prev_register callback for RiscV frame unwinder. */
|
|
|
|
static struct value *
|
|
riscv_frame_prev_register (struct frame_info *this_frame,
|
|
void **prologue_cache,
|
|
int regnum)
|
|
{
|
|
struct riscv_unwind_cache *cache;
|
|
|
|
cache = riscv_frame_cache (this_frame, prologue_cache);
|
|
return trad_frame_get_prev_register (this_frame, cache->regs, regnum);
|
|
}
|
|
|
|
/* Structure defining the RiscV normal frame unwind functions. Since we
|
|
are the fallback unwinder (DWARF unwinder is used first), we use the
|
|
default frame sniffer, which always accepts the frame. */
|
|
|
|
static const struct frame_unwind riscv_frame_unwind =
|
|
{
|
|
/*.type =*/ NORMAL_FRAME,
|
|
/*.stop_reason =*/ default_frame_unwind_stop_reason,
|
|
/*.this_id =*/ riscv_frame_this_id,
|
|
/*.prev_register =*/ riscv_frame_prev_register,
|
|
/*.unwind_data =*/ NULL,
|
|
/*.sniffer =*/ default_frame_sniffer,
|
|
/*.dealloc_cache =*/ NULL,
|
|
/*.prev_arch =*/ NULL,
|
|
};
|
|
|
|
/* Extract a set of required target features out of INFO, specifically the
|
|
bfd being executed is examined to see what target features it requires.
|
|
IF there is no current bfd, or the bfd doesn't indicate any useful
|
|
features then a RISCV_GDBARCH_FEATURES is returned in its default state. */
|
|
|
|
static struct riscv_gdbarch_features
|
|
riscv_features_from_gdbarch_info (const struct gdbarch_info info)
|
|
{
|
|
struct riscv_gdbarch_features features;
|
|
|
|
/* Now try to improve on the defaults by looking at the binary we are
|
|
going to execute. We assume the user knows what they are doing and
|
|
that the target will match the binary. Remember, this code path is
|
|
only used at all if the target hasn't given us a description, so this
|
|
is really a last ditched effort to do something sane before giving
|
|
up. */
|
|
if (info.abfd != NULL
|
|
&& bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
|
|
{
|
|
unsigned char eclass = elf_elfheader (info.abfd)->e_ident[EI_CLASS];
|
|
int e_flags = elf_elfheader (info.abfd)->e_flags;
|
|
|
|
if (eclass == ELFCLASS32)
|
|
features.xlen = 4;
|
|
else if (eclass == ELFCLASS64)
|
|
features.xlen = 8;
|
|
else
|
|
internal_error (__FILE__, __LINE__,
|
|
_("unknown ELF header class %d"), eclass);
|
|
|
|
if (e_flags & EF_RISCV_FLOAT_ABI_DOUBLE)
|
|
features.flen = 8;
|
|
else if (e_flags & EF_RISCV_FLOAT_ABI_SINGLE)
|
|
features.flen = 4;
|
|
}
|
|
|
|
return features;
|
|
}
|
|
|
|
/* Find a suitable default target description. Use the contents of INFO,
|
|
specifically the bfd object being executed, to guide the selection of a
|
|
suitable default target description. */
|
|
|
|
static const struct target_desc *
|
|
riscv_find_default_target_description (const struct gdbarch_info info)
|
|
{
|
|
/* Extract desired feature set from INFO. */
|
|
struct riscv_gdbarch_features features
|
|
= riscv_features_from_gdbarch_info (info);
|
|
|
|
/* If the XLEN field is still 0 then we got nothing useful from INFO. In
|
|
this case we fall back to a minimal useful target, 8-byte x-registers,
|
|
with no floating point. */
|
|
if (features.xlen == 0)
|
|
features.xlen = 8;
|
|
|
|
/* Now build a target description based on the feature set. */
|
|
return riscv_create_target_description (features);
|
|
}
|
|
|
|
/* All of the registers in REG_SET are checked for in FEATURE, TDESC_DATA
|
|
is updated with the register numbers for each register as listed in
|
|
REG_SET. If any register marked as required in REG_SET is not found in
|
|
FEATURE then this function returns false, otherwise, it returns true. */
|
|
|
|
static bool
|
|
riscv_check_tdesc_feature (struct tdesc_arch_data *tdesc_data,
|
|
const struct tdesc_feature *feature,
|
|
const struct riscv_register_feature *reg_set)
|
|
{
|
|
for (const auto ® : reg_set->registers)
|
|
{
|
|
bool found = false;
|
|
|
|
for (const char *name : reg.names)
|
|
{
|
|
found =
|
|
tdesc_numbered_register (feature, tdesc_data, reg.regnum, name);
|
|
|
|
if (found)
|
|
break;
|
|
}
|
|
|
|
if (!found && reg.required_p)
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/* Add all the expected register sets into GDBARCH. */
|
|
|
|
static void
|
|
riscv_add_reggroups (struct gdbarch *gdbarch)
|
|
{
|
|
/* Add predefined register groups. */
|
|
reggroup_add (gdbarch, all_reggroup);
|
|
reggroup_add (gdbarch, save_reggroup);
|
|
reggroup_add (gdbarch, restore_reggroup);
|
|
reggroup_add (gdbarch, system_reggroup);
|
|
reggroup_add (gdbarch, vector_reggroup);
|
|
reggroup_add (gdbarch, general_reggroup);
|
|
reggroup_add (gdbarch, float_reggroup);
|
|
|
|
/* Add RISC-V specific register groups. */
|
|
reggroup_add (gdbarch, csr_reggroup);
|
|
}
|
|
|
|
/* Create register aliases for all the alternative names that exist for
|
|
registers in REG_SET. */
|
|
|
|
static void
|
|
riscv_setup_register_aliases (struct gdbarch *gdbarch,
|
|
const struct riscv_register_feature *reg_set)
|
|
{
|
|
for (auto ® : reg_set->registers)
|
|
{
|
|
/* The first item in the names list is the preferred name for the
|
|
register, this is what RISCV_REGISTER_NAME returns, and so we
|
|
don't need to create an alias with that name here. */
|
|
for (int i = 1; i < reg.names.size (); ++i)
|
|
user_reg_add (gdbarch, reg.names[i], value_of_riscv_user_reg,
|
|
®.regnum);
|
|
}
|
|
}
|
|
|
|
/* Implement the "dwarf2_reg_to_regnum" gdbarch method. */
|
|
|
|
static int
|
|
riscv_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int reg)
|
|
{
|
|
if (reg < RISCV_DWARF_REGNUM_X31)
|
|
return RISCV_ZERO_REGNUM + (reg - RISCV_DWARF_REGNUM_X0);
|
|
|
|
else if (reg < RISCV_DWARF_REGNUM_F31)
|
|
return RISCV_FIRST_FP_REGNUM + (reg - RISCV_DWARF_REGNUM_F0);
|
|
|
|
return -1;
|
|
}
|
|
|
|
/* Initialize the current architecture based on INFO. If possible,
|
|
re-use an architecture from ARCHES, which is a list of
|
|
architectures already created during this debugging session.
|
|
|
|
Called e.g. at program startup, when reading a core file, and when
|
|
reading a binary file. */
|
|
|
|
static struct gdbarch *
|
|
riscv_gdbarch_init (struct gdbarch_info info,
|
|
struct gdbarch_list *arches)
|
|
{
|
|
struct gdbarch *gdbarch;
|
|
struct gdbarch_tdep *tdep;
|
|
struct riscv_gdbarch_features features;
|
|
const struct target_desc *tdesc = info.target_desc;
|
|
|
|
/* Ensure we always have a target description. */
|
|
if (!tdesc_has_registers (tdesc))
|
|
tdesc = riscv_find_default_target_description (info);
|
|
gdb_assert (tdesc);
|
|
|
|
if (riscv_debug_gdbarch)
|
|
fprintf_unfiltered (gdb_stdlog, "Have got a target description\n");
|
|
|
|
const struct tdesc_feature *feature_cpu
|
|
= tdesc_find_feature (tdesc, riscv_xreg_feature.name);
|
|
const struct tdesc_feature *feature_fpu
|
|
= tdesc_find_feature (tdesc, riscv_freg_feature.name);
|
|
const struct tdesc_feature *feature_virtual
|
|
= tdesc_find_feature (tdesc, riscv_virtual_feature.name);
|
|
const struct tdesc_feature *feature_csr
|
|
= tdesc_find_feature (tdesc, riscv_csr_feature.name);
|
|
|
|
if (feature_cpu == NULL)
|
|
return NULL;
|
|
|
|
struct tdesc_arch_data *tdesc_data = tdesc_data_alloc ();
|
|
|
|
bool valid_p = riscv_check_tdesc_feature (tdesc_data,
|
|
feature_cpu,
|
|
&riscv_xreg_feature);
|
|
if (valid_p)
|
|
{
|
|
/* Check that all of the core cpu registers have the same bitsize. */
|
|
int xlen_bitsize = tdesc_register_bitsize (feature_cpu, "pc");
|
|
|
|
for (auto &tdesc_reg : feature_cpu->registers)
|
|
valid_p &= (tdesc_reg->bitsize == xlen_bitsize);
|
|
|
|
if (riscv_debug_gdbarch)
|
|
fprintf_filtered
|
|
(gdb_stdlog,
|
|
"From target-description, xlen = %d\n", xlen_bitsize);
|
|
|
|
features.xlen = (xlen_bitsize / 8);
|
|
}
|
|
|
|
if (feature_fpu != NULL)
|
|
{
|
|
valid_p &= riscv_check_tdesc_feature (tdesc_data, feature_fpu,
|
|
&riscv_freg_feature);
|
|
|
|
/* Search for the first floating point register (by any alias), to
|
|
determine the bitsize. */
|
|
int bitsize = -1;
|
|
const auto &fp0 = riscv_freg_feature.registers[0];
|
|
|
|
for (const char *name : fp0.names)
|
|
{
|
|
if (tdesc_unnumbered_register (feature_fpu, name))
|
|
{
|
|
bitsize = tdesc_register_bitsize (feature_fpu, name);
|
|
break;
|
|
}
|
|
}
|
|
|
|
gdb_assert (bitsize != -1);
|
|
features.flen = (bitsize / 8);
|
|
|
|
if (riscv_debug_gdbarch)
|
|
fprintf_filtered
|
|
(gdb_stdlog,
|
|
"From target-description, flen = %d\n", bitsize);
|
|
}
|
|
else
|
|
{
|
|
features.flen = 0;
|
|
|
|
if (riscv_debug_gdbarch)
|
|
fprintf_filtered
|
|
(gdb_stdlog,
|
|
"No FPU in target-description, assume soft-float ABI\n");
|
|
}
|
|
|
|
if (feature_virtual)
|
|
riscv_check_tdesc_feature (tdesc_data, feature_virtual,
|
|
&riscv_virtual_feature);
|
|
|
|
if (feature_csr)
|
|
riscv_check_tdesc_feature (tdesc_data, feature_csr,
|
|
&riscv_csr_feature);
|
|
|
|
if (!valid_p)
|
|
{
|
|
if (riscv_debug_gdbarch)
|
|
fprintf_unfiltered (gdb_stdlog, "Target description is not valid\n");
|
|
tdesc_data_cleanup (tdesc_data);
|
|
return NULL;
|
|
}
|
|
|
|
/* Have a look at what the supplied (if any) bfd object requires of the
|
|
target, then check that this matches with what the target is
|
|
providing. */
|
|
struct riscv_gdbarch_features abi_features
|
|
= riscv_features_from_gdbarch_info (info);
|
|
/* In theory a binary compiled for RV32 could run on an RV64 target,
|
|
however, this has not been tested in GDB yet, so for now we require
|
|
that the requested xlen match the targets xlen. */
|
|
if (abi_features.xlen != 0 && abi_features.xlen != features.xlen)
|
|
error (_("bfd requires xlen %d, but target has xlen %d"),
|
|
abi_features.xlen, features.xlen);
|
|
/* We do support running binaries compiled for 32-bit float on targets
|
|
with 64-bit float, so we only complain if the binary requires more
|
|
than the target has available. */
|
|
if (abi_features.flen > features.flen)
|
|
error (_("bfd requires flen %d, but target has flen %d"),
|
|
abi_features.flen, features.flen);
|
|
|
|
/* If the ABI_FEATURES xlen is 0 then this indicates we got no useful abi
|
|
features from the INFO object. In this case we assume that the xlen
|
|
abi matches the hardware. */
|
|
if (abi_features.xlen == 0)
|
|
abi_features.xlen = features.xlen;
|
|
|
|
/* Find a candidate among the list of pre-declared architectures. */
|
|
for (arches = gdbarch_list_lookup_by_info (arches, &info);
|
|
arches != NULL;
|
|
arches = gdbarch_list_lookup_by_info (arches->next, &info))
|
|
{
|
|
/* Check that the feature set of the ARCHES matches the feature set
|
|
we are looking for. If it doesn't then we can't reuse this
|
|
gdbarch. */
|
|
struct gdbarch_tdep *other_tdep = gdbarch_tdep (arches->gdbarch);
|
|
|
|
if (other_tdep->isa_features != features
|
|
|| other_tdep->abi_features != abi_features)
|
|
continue;
|
|
|
|
break;
|
|
}
|
|
|
|
if (arches != NULL)
|
|
{
|
|
tdesc_data_cleanup (tdesc_data);
|
|
return arches->gdbarch;
|
|
}
|
|
|
|
/* None found, so create a new architecture from the information provided. */
|
|
tdep = new (struct gdbarch_tdep);
|
|
gdbarch = gdbarch_alloc (&info, tdep);
|
|
tdep->isa_features = features;
|
|
tdep->abi_features = abi_features;
|
|
|
|
/* Target data types. */
|
|
set_gdbarch_short_bit (gdbarch, 16);
|
|
set_gdbarch_int_bit (gdbarch, 32);
|
|
set_gdbarch_long_bit (gdbarch, riscv_isa_xlen (gdbarch) * 8);
|
|
set_gdbarch_long_long_bit (gdbarch, 64);
|
|
set_gdbarch_float_bit (gdbarch, 32);
|
|
set_gdbarch_double_bit (gdbarch, 64);
|
|
set_gdbarch_long_double_bit (gdbarch, 128);
|
|
set_gdbarch_long_double_format (gdbarch, floatformats_ia64_quad);
|
|
set_gdbarch_ptr_bit (gdbarch, riscv_isa_xlen (gdbarch) * 8);
|
|
set_gdbarch_char_signed (gdbarch, 0);
|
|
set_gdbarch_type_align (gdbarch, riscv_type_align);
|
|
|
|
/* Information about the target architecture. */
|
|
set_gdbarch_return_value (gdbarch, riscv_return_value);
|
|
set_gdbarch_breakpoint_kind_from_pc (gdbarch, riscv_breakpoint_kind_from_pc);
|
|
set_gdbarch_sw_breakpoint_from_kind (gdbarch, riscv_sw_breakpoint_from_kind);
|
|
set_gdbarch_have_nonsteppable_watchpoint (gdbarch, 1);
|
|
|
|
/* Functions to analyze frames. */
|
|
set_gdbarch_skip_prologue (gdbarch, riscv_skip_prologue);
|
|
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
|
|
set_gdbarch_frame_align (gdbarch, riscv_frame_align);
|
|
|
|
/* Functions handling dummy frames. */
|
|
set_gdbarch_call_dummy_location (gdbarch, ON_STACK);
|
|
set_gdbarch_push_dummy_code (gdbarch, riscv_push_dummy_code);
|
|
set_gdbarch_push_dummy_call (gdbarch, riscv_push_dummy_call);
|
|
|
|
/* Frame unwinders. Use DWARF debug info if available, otherwise use our own
|
|
unwinder. */
|
|
dwarf2_append_unwinders (gdbarch);
|
|
frame_unwind_append_unwinder (gdbarch, &riscv_frame_unwind);
|
|
|
|
/* Register architecture. */
|
|
riscv_add_reggroups (gdbarch);
|
|
|
|
/* Internal <-> external register number maps. */
|
|
set_gdbarch_dwarf2_reg_to_regnum (gdbarch, riscv_dwarf_reg_to_regnum);
|
|
|
|
/* We reserve all possible register numbers for the known registers.
|
|
This means the target description mechanism will add any target
|
|
specific registers after this number. This helps make debugging GDB
|
|
just a little easier. */
|
|
set_gdbarch_num_regs (gdbarch, RISCV_LAST_REGNUM + 1);
|
|
|
|
/* We don't have to provide the count of 0 here (its the default) but
|
|
include this line to make it explicit that, right now, we don't have
|
|
any pseudo registers on RISC-V. */
|
|
set_gdbarch_num_pseudo_regs (gdbarch, 0);
|
|
|
|
/* Some specific register numbers GDB likes to know about. */
|
|
set_gdbarch_sp_regnum (gdbarch, RISCV_SP_REGNUM);
|
|
set_gdbarch_pc_regnum (gdbarch, RISCV_PC_REGNUM);
|
|
|
|
set_gdbarch_print_registers_info (gdbarch, riscv_print_registers_info);
|
|
|
|
/* Finalise the target description registers. */
|
|
tdesc_use_registers (gdbarch, tdesc, tdesc_data);
|
|
|
|
/* Override the register type callback setup by the target description
|
|
mechanism. This allows us to provide special type for floating point
|
|
registers. */
|
|
set_gdbarch_register_type (gdbarch, riscv_register_type);
|
|
|
|
/* Override the register name callback setup by the target description
|
|
mechanism. This allows us to force our preferred names for the
|
|
registers, no matter what the target description called them. */
|
|
set_gdbarch_register_name (gdbarch, riscv_register_name);
|
|
|
|
/* Override the register group callback setup by the target description
|
|
mechanism. This allows us to force registers into the groups we
|
|
want, ignoring what the target tells us. */
|
|
set_gdbarch_register_reggroup_p (gdbarch, riscv_register_reggroup_p);
|
|
|
|
/* Create register aliases for alternative register names. */
|
|
riscv_setup_register_aliases (gdbarch, &riscv_xreg_feature);
|
|
if (riscv_has_fp_regs (gdbarch))
|
|
riscv_setup_register_aliases (gdbarch, &riscv_freg_feature);
|
|
riscv_setup_register_aliases (gdbarch, &riscv_csr_feature);
|
|
|
|
/* Hook in OS ABI-specific overrides, if they have been registered. */
|
|
gdbarch_init_osabi (info, gdbarch);
|
|
|
|
return gdbarch;
|
|
}
|
|
|
|
/* This decodes the current instruction and determines the address of the
|
|
next instruction. */
|
|
|
|
static CORE_ADDR
|
|
riscv_next_pc (struct regcache *regcache, CORE_ADDR pc)
|
|
{
|
|
struct gdbarch *gdbarch = regcache->arch ();
|
|
struct riscv_insn insn;
|
|
CORE_ADDR next_pc;
|
|
|
|
insn.decode (gdbarch, pc);
|
|
next_pc = pc + insn.length ();
|
|
|
|
if (insn.opcode () == riscv_insn::JAL)
|
|
next_pc = pc + insn.imm_signed ();
|
|
else if (insn.opcode () == riscv_insn::JALR)
|
|
{
|
|
LONGEST source;
|
|
regcache->cooked_read (insn.rs1 (), &source);
|
|
next_pc = (source + insn.imm_signed ()) & ~(CORE_ADDR) 0x1;
|
|
}
|
|
else if (insn.opcode () == riscv_insn::BEQ)
|
|
{
|
|
LONGEST src1, src2;
|
|
regcache->cooked_read (insn.rs1 (), &src1);
|
|
regcache->cooked_read (insn.rs2 (), &src2);
|
|
if (src1 == src2)
|
|
next_pc = pc + insn.imm_signed ();
|
|
}
|
|
else if (insn.opcode () == riscv_insn::BNE)
|
|
{
|
|
LONGEST src1, src2;
|
|
regcache->cooked_read (insn.rs1 (), &src1);
|
|
regcache->cooked_read (insn.rs2 (), &src2);
|
|
if (src1 != src2)
|
|
next_pc = pc + insn.imm_signed ();
|
|
}
|
|
else if (insn.opcode () == riscv_insn::BLT)
|
|
{
|
|
LONGEST src1, src2;
|
|
regcache->cooked_read (insn.rs1 (), &src1);
|
|
regcache->cooked_read (insn.rs2 (), &src2);
|
|
if (src1 < src2)
|
|
next_pc = pc + insn.imm_signed ();
|
|
}
|
|
else if (insn.opcode () == riscv_insn::BGE)
|
|
{
|
|
LONGEST src1, src2;
|
|
regcache->cooked_read (insn.rs1 (), &src1);
|
|
regcache->cooked_read (insn.rs2 (), &src2);
|
|
if (src1 >= src2)
|
|
next_pc = pc + insn.imm_signed ();
|
|
}
|
|
else if (insn.opcode () == riscv_insn::BLTU)
|
|
{
|
|
ULONGEST src1, src2;
|
|
regcache->cooked_read (insn.rs1 (), &src1);
|
|
regcache->cooked_read (insn.rs2 (), &src2);
|
|
if (src1 < src2)
|
|
next_pc = pc + insn.imm_signed ();
|
|
}
|
|
else if (insn.opcode () == riscv_insn::BGEU)
|
|
{
|
|
ULONGEST src1, src2;
|
|
regcache->cooked_read (insn.rs1 (), &src1);
|
|
regcache->cooked_read (insn.rs2 (), &src2);
|
|
if (src1 >= src2)
|
|
next_pc = pc + insn.imm_signed ();
|
|
}
|
|
|
|
return next_pc;
|
|
}
|
|
|
|
/* We can't put a breakpoint in the middle of a lr/sc atomic sequence, so look
|
|
for the end of the sequence and put the breakpoint there. */
|
|
|
|
static bool
|
|
riscv_next_pc_atomic_sequence (struct regcache *regcache, CORE_ADDR pc,
|
|
CORE_ADDR *next_pc)
|
|
{
|
|
struct gdbarch *gdbarch = regcache->arch ();
|
|
struct riscv_insn insn;
|
|
CORE_ADDR cur_step_pc = pc;
|
|
CORE_ADDR last_addr = 0;
|
|
|
|
/* First instruction has to be a load reserved. */
|
|
insn.decode (gdbarch, cur_step_pc);
|
|
if (insn.opcode () != riscv_insn::LR)
|
|
return false;
|
|
cur_step_pc = cur_step_pc + insn.length ();
|
|
|
|
/* Next instruction should be branch to exit. */
|
|
insn.decode (gdbarch, cur_step_pc);
|
|
if (insn.opcode () != riscv_insn::BNE)
|
|
return false;
|
|
last_addr = cur_step_pc + insn.imm_signed ();
|
|
cur_step_pc = cur_step_pc + insn.length ();
|
|
|
|
/* Next instruction should be store conditional. */
|
|
insn.decode (gdbarch, cur_step_pc);
|
|
if (insn.opcode () != riscv_insn::SC)
|
|
return false;
|
|
cur_step_pc = cur_step_pc + insn.length ();
|
|
|
|
/* Next instruction should be branch to start. */
|
|
insn.decode (gdbarch, cur_step_pc);
|
|
if (insn.opcode () != riscv_insn::BNE)
|
|
return false;
|
|
if (pc != (cur_step_pc + insn.imm_signed ()))
|
|
return false;
|
|
cur_step_pc = cur_step_pc + insn.length ();
|
|
|
|
/* We should now be at the end of the sequence. */
|
|
if (cur_step_pc != last_addr)
|
|
return false;
|
|
|
|
*next_pc = cur_step_pc;
|
|
return true;
|
|
}
|
|
|
|
/* This is called just before we want to resume the inferior, if we want to
|
|
single-step it but there is no hardware or kernel single-step support. We
|
|
find the target of the coming instruction and breakpoint it. */
|
|
|
|
std::vector<CORE_ADDR>
|
|
riscv_software_single_step (struct regcache *regcache)
|
|
{
|
|
CORE_ADDR pc, next_pc;
|
|
|
|
pc = regcache_read_pc (regcache);
|
|
|
|
if (riscv_next_pc_atomic_sequence (regcache, pc, &next_pc))
|
|
return {next_pc};
|
|
|
|
next_pc = riscv_next_pc (regcache, pc);
|
|
|
|
return {next_pc};
|
|
}
|
|
|
|
/* Create RISC-V specific reggroups. */
|
|
|
|
static void
|
|
riscv_init_reggroups ()
|
|
{
|
|
csr_reggroup = reggroup_new ("csr", USER_REGGROUP);
|
|
}
|
|
|
|
void
|
|
_initialize_riscv_tdep (void)
|
|
{
|
|
riscv_create_csr_aliases ();
|
|
riscv_init_reggroups ();
|
|
|
|
gdbarch_register (bfd_arch_riscv, riscv_gdbarch_init, NULL);
|
|
|
|
/* Add root prefix command for all "set debug riscv" and "show debug
|
|
riscv" commands. */
|
|
add_prefix_cmd ("riscv", no_class, set_debug_riscv_command,
|
|
_("RISC-V specific debug commands."),
|
|
&setdebugriscvcmdlist, "set debug riscv ", 0,
|
|
&setdebuglist);
|
|
|
|
add_prefix_cmd ("riscv", no_class, show_debug_riscv_command,
|
|
_("RISC-V specific debug commands."),
|
|
&showdebugriscvcmdlist, "show debug riscv ", 0,
|
|
&showdebuglist);
|
|
|
|
add_setshow_zuinteger_cmd ("breakpoints", class_maintenance,
|
|
&riscv_debug_breakpoints, _("\
|
|
Set riscv breakpoint debugging."), _("\
|
|
Show riscv breakpoint debugging."), _("\
|
|
When non-zero, print debugging information for the riscv specific parts\n\
|
|
of the breakpoint mechanism."),
|
|
NULL,
|
|
show_riscv_debug_variable,
|
|
&setdebugriscvcmdlist, &showdebugriscvcmdlist);
|
|
|
|
add_setshow_zuinteger_cmd ("infcall", class_maintenance,
|
|
&riscv_debug_infcall, _("\
|
|
Set riscv inferior call debugging."), _("\
|
|
Show riscv inferior call debugging."), _("\
|
|
When non-zero, print debugging information for the riscv specific parts\n\
|
|
of the inferior call mechanism."),
|
|
NULL,
|
|
show_riscv_debug_variable,
|
|
&setdebugriscvcmdlist, &showdebugriscvcmdlist);
|
|
|
|
add_setshow_zuinteger_cmd ("unwinder", class_maintenance,
|
|
&riscv_debug_unwinder, _("\
|
|
Set riscv stack unwinding debugging."), _("\
|
|
Show riscv stack unwinding debugging."), _("\
|
|
When non-zero, print debugging information for the riscv specific parts\n\
|
|
of the stack unwinding mechanism."),
|
|
NULL,
|
|
show_riscv_debug_variable,
|
|
&setdebugriscvcmdlist, &showdebugriscvcmdlist);
|
|
|
|
add_setshow_zuinteger_cmd ("gdbarch", class_maintenance,
|
|
&riscv_debug_gdbarch, _("\
|
|
Set riscv gdbarch initialisation debugging."), _("\
|
|
Show riscv gdbarch initialisation debugging."), _("\
|
|
When non-zero, print debugging information for the riscv gdbarch\n\
|
|
initialisation process."),
|
|
NULL,
|
|
show_riscv_debug_variable,
|
|
&setdebugriscvcmdlist, &showdebugriscvcmdlist);
|
|
|
|
/* Add root prefix command for all "set riscv" and "show riscv" commands. */
|
|
add_prefix_cmd ("riscv", no_class, set_riscv_command,
|
|
_("RISC-V specific commands."),
|
|
&setriscvcmdlist, "set riscv ", 0, &setlist);
|
|
|
|
add_prefix_cmd ("riscv", no_class, show_riscv_command,
|
|
_("RISC-V specific commands."),
|
|
&showriscvcmdlist, "show riscv ", 0, &showlist);
|
|
|
|
|
|
use_compressed_breakpoints = AUTO_BOOLEAN_AUTO;
|
|
add_setshow_auto_boolean_cmd ("use-compressed-breakpoints", no_class,
|
|
&use_compressed_breakpoints,
|
|
_("\
|
|
Set debugger's use of compressed breakpoints."), _(" \
|
|
Show debugger's use of compressed breakpoints."), _("\
|
|
Debugging compressed code requires compressed breakpoints to be used. If\n\
|
|
left to 'auto' then gdb will use them if the existing instruction is a\n\
|
|
compressed instruction. If that doesn't give the correct behavior, then\n\
|
|
this option can be used."),
|
|
NULL,
|
|
show_use_compressed_breakpoints,
|
|
&setriscvcmdlist,
|
|
&showriscvcmdlist);
|
|
}
|