mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-11-28 04:25:10 +08:00
e17a411335
extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * gdbcore.h (read_memory_integer, safe_read_memory_integer, read_memory_unsigned_integer, write_memory_signed_integer, write_memory_unsigned_integer): Add BYTE_ORDER parameter. * corefile.c (struct captured_read_memory_integer_arguments): Add BYTE_ORDER member. (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into struct captured_read_memory_integer_arguments. (do_captured_read_memory_integer): Pass it to read_memory_integer. (read_memory_integer): Add BYTE_ORDER parameter. Pass it to extract_signed_integer. (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it to store_signed_integer. (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to store_unsigned_integer. * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter. * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. Update calls to extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer, read_memory_integer, read_memory_unsigned_integer, safe_read_memory_integer, write_memory_signed_integer, write_memory_unsigned_integer, and get_target_memory_unsigned to pass byte order: * ada-lang.c (ada_value_binop): Update. * ada-valprint.c (char_at): Update. * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update. * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call, alpha_extract_return_value, alpha_read_insn, alpha_get_longjmp_target): Update. * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update. * amd64obsd-tdep.c (amd64obsd_supply_uthread, amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update. * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue, amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel, amd64_displaced_step_fixup): Update. * arm-linux-tdep.c (arm_linux_sigreturn_init, arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update. * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value, arm_store_return_value, arm_return_value): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. * auxv.c (default_auxv_parse): Update. * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address, avr_scan_prologue, avr_extract_return_value, avr_frame_prev_register, avr_push_dummy_call): Update. * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset, bsd_uthread_wait, bsd_uthread_thread_alive, bsd_uthread_extra_thread_info): Update. * c-lang.c (c_printstr, print_wchar): Update. * cp-valprint.c (cp_print_class_member): Update. * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache, cris_push_dummy_call, cris_scan_prologue, cris_store_return_value, cris_extract_return_value, find_step_target, dip_prefix, sixteen_bit_offset_branch_op, none_reg_mode_jump_op, move_mem_to_reg_movem_op, get_data_from_address): Update. * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update. * dwarf2-frame.c (execute_cfa_program): Update. * dwarf2loc.c (find_location_expression): Update. * dwarf2read.c (dwarf2_const_value): Update. * expprint.c (print_subexp_standard): Update. * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address, unsigned_address_to_pointer, address_to_signed_pointer, read_var_value): Update. * frame.c (frame_unwind_register_signed, frame_unwind_register_unsigned, get_frame_memory_signed, get_frame_memory_unsigned): Update. * frame-unwind.c (frame_unwind_got_constant): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp, frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache): Update. * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue, frv_extract_return_value, find_func_descr, frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update. * f-valprint.c (f_val_print): Update. * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr): Update. * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue, h8300_push_dummy_call, h8300_extract_return_value, h8300h_extract_return_value, h8300_store_return_value, h8300h_store_return_value): Update. * hppabsd-tdep.c (hppabsd_find_global_pointer): Update. * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline, hppa64_hpux_in_solib_call_trampoline, hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code, hppa_hpux_sigtramp_frame_unwind_cache, hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer, hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern, hppa32_hpux_search_dummy_call_sequence, hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state, hppa_hpux_unwind_adjust_stub): Update. * hppa-linux-tdep.c (insns_match_pattern, hppa_linux_find_global_pointer): Update. * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call, hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call, skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache, hppa_pseudo_register_read, hppa_frame_prev_register_helper, hppa_match_insns): Update. * hpux-thread.c (hpux_thread_fetch_registers): Update. * i386-tdep.c (i386bsd_sigcontext_addr): Update. * i386-cygwin-tdep.c (core_process_module_section): Update. * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn, amd64_darwin_sstep_at_sigreturn): Update. * i386-darwin-tdep.c (i386_darwin_sigcontext_addr, amd64_darwin_sigcontext_addr): Likewise. * i386-linux-nat.c (i386_linux_sigcontext_addr): Update. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update. * i386-nto-tdep.c (i386nto_sigcontext_addr): Update. * i386obsd-nat.c (i386obsd_supply_pcb): Update. * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread, i386obsd_trapframe_cache): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump, i386_analyze_frame_setup, i386_analyze_prologue, i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache, i386_get_longjmp_target, i386_push_dummy_call, i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr, i386_fetch_pointer_argument): Update. * i387-tdep.c (i387_supply_fsave): Update. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update. * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write, examine_prologue, ia64_frame_cache, ia64_frame_prev_register, ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register, ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id, ia64_libunwind_frame_prev_register, ia64_libunwind_sigtramp_frame_this_id, ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer, find_extant_func_descr, find_func_descr, ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id, ia64_unwind_pc): Update. * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer, iq2000_scan_prologue, iq2000_extract_return_value, iq2000_push_dummy_call): Update. * irix5nat.c (fill_gregset): Update. * jv-lang.c (evaluate_subexp_java): Update. * jv-valprint.c (java_value_print): Update. * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call, lm32_extract_return_value, lm32_store_return_value): Update. * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value, m32c_skip_trampoline_code, m32c_m16c_address_to_pointer, m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_store_return_value, decode_prologue, m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value): Update. * m68hc11-tdep.c (m68hc11_pseudo_register_read, m68hc11_pseudo_register_write, m68hc11_analyze_instruction, m68hc11_push_dummy_call): Update. * m68linux-tdep.c (m68k_linux_pc_in_sigtramp, m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache): Update. * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup, m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache, m68k_get_longjmp_target): Update. * m88k-tdep.c (m88k_fetch_instruction): Update. * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write, mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update. * mi/mi-main.c (mi_cmd_data_write_memory): Update. * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg, mips64_linux_get_longjmp_target, mips64_fill_gregset, mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update. * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update. * mips-tdep.c (mips_fetch_instruction, fetch_mips_16, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call, mips_single_step_through_delay, mips_skip_pic_trampoline_code, mips_integer_to_address): Update. * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call): Update. * monitor.c (monitor_supply_register, monitor_write_memory, monitor_read_memory_single): Update. * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value, moxie_analyze_prologue): Update. * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor, mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info, mt_push_dummy_call): Update. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class, find_implementation_from_class): Update. * ppc64-linux-tdep.c (ppc64_desc_entry_point, ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache): Update. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer, ppcobsd_sigtramp_frame_cache): Update. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call, do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_return_value): Update. * ppc-linux-nat.c (ppc_linux_auxv_parse): Update. * procfs.c (procfs_auxv_parse): Update. * p-valprint.c (pascal_val_print): Update. * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned, regcache_raw_write_signed, regcache_raw_write_unsigned, regcache_cooked_read_signed, regcache_cooked_read_unsigned, regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update. * remote-m32r-sdi.c (m32r_fetch_register): Update. * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory): Update. * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value, rs6000_convert_from_func_ptr_addr, branch_dest, rs6000_software_single_step): Update. * rs6000-tdep.c (rs6000_in_function_epilogue_p, ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence, bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue, rs6000_skip_main_prologue, rs6000_skip_trampoline_code, rs6000_frame_cache): Update. * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write, s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load, s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache, extend_simple_arg, s390_push_dummy_call, s390_return_value): Update. * scm-exp.c (scm_lreadr): Update. * scm-lang.c (scm_get_field, scm_unpack): Update. * scm-valprint.c (scm_val_print): Update. * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call, score_fetch_inst): Update. * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way, sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value, sh64_pseudo_register_read, sh64_pseudo_register_write, sh64_frame_prev_register): Update: * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu, sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update. * solib-darwin.c (darwin_load_image_infos): Update. * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2, find_canonical_descriptor_in_load_object): Update. * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Update. * solib-som.c (som_solib_create_inferior_hook, link_map_start, som_current_sos, som_open_symbol_file_object): Update. * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME): Update. * solib-svr4.c (read_program_header, scan_dyntag_auxv, solib_svr4_r_ldsomap): Update. * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update. * sparc64obsd-tdep.c (sparc64obsd_supply_uthread, sparc64obsd_collect_uthread): Update. * sparc64-tdep.c (sparc64_pseudo_register_read, sparc64_pseudo_register_write, sparc64_supply_gregset, sparc64_collect_gregset): Update. * sparc-linux-tdep.c (sparc32_linux_step_trap): Update. * sparcobsd-tdep.c (sparc32obsd_supply_uthread, sparc32obsd_collect_uthread): Update. * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code, sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow, sparc_collect_rwindow): Update. * spu-linux-nat.c (parse_spufs_run): Update. * spu-tdep.c (spu_pseudo_register_read_spu, spu_pseudo_register_write_spu, spu_pointer_to_address, spu_analyze_prologue, spu_in_function_epilogue_p, spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step, spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect, info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist, info_spu_dma_command, info_spu_proxydma_command): Update. * stack.c (print_frame_nameless_args, frame_info): Update. * symfile.c (read_target_long_array, simple_read_overlay_table, simple_read_overlay_region_table): Update. * target.c (debug_print_register): Update. * tramp-frame.c (tramp_frame_start): Update. * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call, v850_extract_return_value, v850_store_return_value, * valarith.c (value_binop, value_bit_index): Update. * valops.c (value_cast): Update. * valprint.c (val_print_type_code_int, val_print_string, read_string): Update. * value.c (unpack_long, unpack_double, unpack_field_as_long, modify_field, pack_long): Update. * vax-tdep.c (vax_store_arguments, vax_push_dummy_call, vax_skip_prologue): Update. * xstormy16-tdep.c (xstormy16_push_dummy_call, xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p, xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry, xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update. * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read, xtensa_pseudo_register_write, xtensa_frame_cache, xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update. * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. (decimal_to_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. Pass it to match_endianness. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. Pass them to match_endianness. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. Pass them to match_endianness. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. Pass them to match_endianness. * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and BYTE_ORDER_Y output parameters. (value_binop): Update call to value_args_as_decimal. Update calls to decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero, decimal_binop, decimal_compare and decimal_convert to pass/receive byte order: * c-exp.y (parse_number): Update. * printcmd.c (printf_command): Update. * valarith.c (value_args_as_decimal, value_binop, value_logical_not, value_equal, value_less): Update. * valops.c (value_cast, value_one): Update. * valprint.c (print_decimal_floating): Update. * value.c (unpack_long, unpack_double): Update. * python/python-value.c (valpy_nonzero): Update. * ada-valprint.c (char_at): Add BYTE_ORDER parameter. (printstr): Update calls to char_at. (ada_val_print_array): Likewise. * valprint.c (read_string): Add BYTE_ORDER parameter. (val_print_string): Update call to read_string. * c-lang.c (c_get_string): Likewise. * charset.h (target_wide_charset): Add BYTE_ORDER parameter. * charset.c (target_wide_charset): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * printcmd.c (printf_command): Update calls to target_wide_charset. * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter. Pass to target_wide_charset. Use it instead of current_gdbarch. (classify_type): Add BYTE_ORDER parameter. Pass to charset_for_string_type. Allow NULL encoding pointer. (print_wchar): Add BYTE_ORDER parameter. (c_emit_char): Update calls to classify_type and print_wchar. (c_printchar, c_printstr): Likewise. * gdbarch.sh (in_solib_return_trampoline): Convert to type "m". * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH parameter. * arch-utils.c (generic_in_solib_return_trampoline): Likewise. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise. (rs6000_skip_trampoline_code): Update call. * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to dynamic_sigtramp_offset and pc_in_sigtramp callbacks. (alpha_read_insn): Add GDBARCH parameter. * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter. (alpha_register_to_value): Pass architecture to alpha_sts. (alpha_extract_return_value): Likewise. (alpha_value_to_register): Pass architecture to alpha_lds. (alpha_store_return_value): Likewise. (alpha_read_insn): Add GDBARCH parameter. (alpha_skip_prologue): Pass architecture to alpha_read_insn. (alpha_heuristic_proc_start): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_next_pc): Likewise. (alpha_sigtramp_frame_this_id): Pass architecture to tdep->dynamic_sigtramp_offset callback. (alpha_sigtramp_frame_sniffer): Pass architecture to tdep->pc_in_sigtramp callback. * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter. (alphafbsd_sigtramp_offset): Likewise. * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH parameter. Pass to alpha_read_insn. (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset_1. (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset. (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn and alpha_linux_sigtramp_offset. * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter. (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alphanbsd_sigtramp_offset. * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter. (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_read_insn. (alphaobsd_sigcontext_addr): Pass architecture to alphaobsd_sigtramp_offset. * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH parameter. * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter. (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue. (amd64_frame_cache): Likewise. * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove. (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros. * arm-wince-tdep.c: Include "frame.h". * avr-tdep.c (EXTRACT_INSN): Remove. (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN. (avr_skip_prologue): Pass architecture to avr_scan_prologue. (avr_frame_unwind_cache): Likewise. * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member. (find_step_target): Initialize it. (get_data_from_address): Add BYTE_ORDER parameter. (bdap_prefix): Pass byte order to get_data_from_address. (handle_prefix_assign_mode_for_aritm_op): Likewise. (three_operand_add_sub_cmp_and_or_op): Likewise. (handle_inc_and_index_mode_for_aritm_op): Likewise. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter. (frv_linux_sigcontext_reg_addr): Pass architecture to frv_linux_pc_in_sigtramp. (frv_linux_sigtramp_frame_sniffer): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter. (h8300_analyze_prologue): Add GDBARCH parameter. Pass to h8300_is_argument_spill. (h8300_frame_cache, h8300_skip_prologue): Pass architecture to h8300_analyze_prologue. * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to in_solib_call_trampoline callback. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH parameter. (hppa64_push_dummy_call): Pass architecture to hppa64_convert_code_addr_to_fptr. (hppa_match_insns): Add GDBARCH parameter. (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to hppa_match_insns. (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to hppa_match_insns_relaxed. (hppa_stub_unwind_sniffer): Pass architecture to tdep->in_solib_call_trampoline callback. * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter. (hppa32_hpux_search_dummy_call_sequence): Pass architecture to hppa_hpux_search_pattern. * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter. (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter. Pass to insns_match_pattern. (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to hppa_linux_sigtramp_find_sigcontext. (hppa_linux_sigtramp_frame_sniffer): Likewise. (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter. (hppa64_hpux_in_solib_call_trampoline): Likewise. * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter. (i386_analyze_frame_setup): Add GDBARCH parameter. (i386_analyze_prologue): Add GDBARCH parameter. Pass to i386_follow_jump and i386_analyze_frame_setup. (i386_skip_prologue): Pass architecture to i386_analyze_prologue and i386_follow_jump. (i386_frame_cache): Pass architecture to i386_analyze_prologue. (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass frame to i386_pe_skip_trampoline_code. * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to sigcontext_register_address callback. * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter. (ia64_find_unwind_table): Pass architecture to ia64_find_global_pointer. (find_extant_func_descr): Add GDBARCH parameter. (find_func_descr): Pass architecture to find_extant_func_descr and ia64_find_global_pointer. (ia64_sigtramp_frame_init_saved_regs): Pass architecture to tdep->sigcontext_register_address callback. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add GDBARCH parameter. * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter. (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue. * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter. (lm32_skip_prologue, lm32_frame_cache): Pass architecture to lm32_analyze_prologue. * m32r-tdep.c (decode_prologue): Add GDBARCH parameter. (m32r_skip_prologue): Pass architecture to decode_prologue. * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter. (m68hc11_scan_prologue): Pass architecture to m68hc11_analyze_instruction. * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter. (m68k_analyze_prologue): Pass architecture to m68k_analyze_frame_setup. * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter. (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order to m88k_fetch_instruction. (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue. (m88k_frame_cache): Likewise. * mep-tdep.c (mep_get_insn): Add GDBARCH parameter. (mep_analyze_prologue): Pass architecture to mep_get_insn. * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter. (mips32_next_pc): Pass architecture to mips_fetch_instruction. (deal_with_atomic_sequence): Likewise. (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction. (mips16_scan_prologue): Likewise. (mips32_scan_prologue): Likewise. (mips16_in_function_epilogue_p): Likewise. (mips32_in_function_epilogue_p): Likewise. (mips_about_to_return): Likewise. (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue. (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue. (mips_skip_prologue): Pass architecture to mips16_scan_prologue and mips32_scan_prologue. (mips_in_function_epilogue_p): Pass architecture to mips16_in_function_epilogue_p and mips32_in_function_epilogue_p. (heuristic_proc_start): Pass architecture to mips_fetch_instruction and mips_about_to_return. (mips_skip_mips16_trampoline_code): Pass architecture to mips_fetch_instruction. (fetch_mips_16): Add GDBARCH parameter. (mips16_next_pc): Pass architecture to fetch_mips_16. (extended_mips16_next_pc): Pass architecture to unpack_mips16 and fetch_mips_16. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class): Add GDBARCH parameter. (find_implementation_from_class): Add GDBARCH parameter, pass to read_objc_class, read_objc_methlist_nmethods, and read_objc_methlist_method. (find_implementation): Add GDBARCH parameter, pass to read_objc_object and find_implementation_from_class. (resolve_msgsend, resolve_msgsend_stret): Pass architecture to find_implementation. (resolve_msgsend_super, resolve_msgsend_super_stret): Pass architecture to read_objc_super and find_implementation_from_class. * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter. (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target, ppc64_standard_linkage3_target): Pass architecture to ppc64_desc_entry_point. * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter. (skip_prologue): Pass byte order to bl_to_blrl_insn_p. (rs6000_fetch_instruction): Add GDBARCH parameter. (rs6000_skip_stack_check): Add GDBARCH parameter, pass to rs6000_fetch_instruction. (skip_prologue): Pass architecture to rs6000_fetch_instruction. * remote-mips.c (mips_store_word): Return old_contents as host integer value instead of target bytes. * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member. (s390_analyze_prologue): Initialize it. (extend_simple_arg): Add GDBARCH parameter. (s390_push_dummy_call): Pass architecture to extend_simple_arg. * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter. * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter. (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field. * scm-valprint.c (scm_scmval_print): Likewise. (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define SCM_BYTE_ORDER. * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter. (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to look_for_args_moves. (sh64_skip_prologue): Pass architecture to sh64_skip_prologue_hard_way. * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter. (sh_skip_prologue): Pass architecture to sh_analyze_prologue. (sh_frame_cache): Likewise. * solib-irix.c (extract_mips_address): Add GDBARCH parameter. (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Pass architecture to extract_mips_address. * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter. * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter. (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture to sparc_fetch_wcookie. (sparc32_frame_prev_register): Likewise. * sparc64-tdep.c (sparc64_frame_prev_register): Likewise. * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter. (spu_skip_prologue): Pass architecture to spu_analyze_prologue. (spu_virtual_frame_pointer): Likewise. (spu_frame_unwind_cache): Likewise. (info_spu_mailbox_list): Add BYTE_ORER parameter. (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list. (info_spu_dma_cmdlist): Add BYTE_ORER parameter. (info_spu_dma_command, info_spu_proxydma_command): Pass byte order to info_spu_dma_cmdlist. * symfile.c (read_target_long_array): Add GDBARCH parameter. (simple_read_overlay_table, simple_read_overlay_region_table, simple_overlay_update_1): Pass architecture to read_target_long_array. * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter. (v850_frame_cache): Pass architecture to v850_analyze_prologue. * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH parameter. (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture to xstormy16_analyze_prologue. (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter. (xstormy16_find_jmp_table_entry): Likewise. (xstormy16_skip_trampoline_code): Pass architecture to xstormy16_resolve_jmp_table_entry. (xstormy16_pointer_to_address): Likewise. (xstormy16_address_to_pointer): Pass architecture to xstormy16_find_jmp_table_entry. * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter. (call0_analyze_prologue): Add GDBARCH parameter, pass to call0_track_op. (call0_frame_cache): Pass architecture to call0_analyze_prologue. (xtensa_skip_prologue): Likewise.
1531 lines
49 KiB
C
1531 lines
49 KiB
C
/* Target-dependent code for PowerPC systems using the SVR4 ABI
|
|
for GDB, the GNU debugger.
|
|
|
|
Copyright (C) 2000, 2001, 2002, 2003, 2005, 2007, 2008, 2009
|
|
Free Software Foundation, Inc.
|
|
|
|
This file is part of GDB.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
#include "defs.h"
|
|
#include "gdbcore.h"
|
|
#include "inferior.h"
|
|
#include "regcache.h"
|
|
#include "value.h"
|
|
#include "gdb_string.h"
|
|
#include "gdb_assert.h"
|
|
#include "ppc-tdep.h"
|
|
#include "target.h"
|
|
#include "objfiles.h"
|
|
#include "infcall.h"
|
|
|
|
/* Pass the arguments in either registers, or in the stack. Using the
|
|
ppc sysv ABI, the first eight words of the argument list (that might
|
|
be less than eight parameters if some parameters occupy more than one
|
|
word) are passed in r3..r10 registers. float and double parameters are
|
|
passed in fpr's, in addition to that. Rest of the parameters if any
|
|
are passed in user stack.
|
|
|
|
If the function is returning a structure, then the return address is passed
|
|
in r3, then the first 7 words of the parametes can be passed in registers,
|
|
starting from r4. */
|
|
|
|
CORE_ADDR
|
|
ppc_sysv_abi_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
|
|
struct regcache *regcache, CORE_ADDR bp_addr,
|
|
int nargs, struct value **args, CORE_ADDR sp,
|
|
int struct_return, CORE_ADDR struct_addr)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
ULONGEST saved_sp;
|
|
int argspace = 0; /* 0 is an initial wrong guess. */
|
|
int write_pass;
|
|
|
|
gdb_assert (tdep->wordsize == 4);
|
|
|
|
regcache_cooked_read_unsigned (regcache, gdbarch_sp_regnum (gdbarch),
|
|
&saved_sp);
|
|
|
|
/* Go through the argument list twice.
|
|
|
|
Pass 1: Figure out how much new stack space is required for
|
|
arguments and pushed values. Unlike the PowerOpen ABI, the SysV
|
|
ABI doesn't reserve any extra space for parameters which are put
|
|
in registers, but does always push structures and then pass their
|
|
address.
|
|
|
|
Pass 2: Replay the same computation but this time also write the
|
|
values out to the target. */
|
|
|
|
for (write_pass = 0; write_pass < 2; write_pass++)
|
|
{
|
|
int argno;
|
|
/* Next available floating point register for float and double
|
|
arguments. */
|
|
int freg = 1;
|
|
/* Next available general register for non-float, non-vector
|
|
arguments. */
|
|
int greg = 3;
|
|
/* Next available vector register for vector arguments. */
|
|
int vreg = 2;
|
|
/* Arguments start above the "LR save word" and "Back chain". */
|
|
int argoffset = 2 * tdep->wordsize;
|
|
/* Structures start after the arguments. */
|
|
int structoffset = argoffset + argspace;
|
|
|
|
/* If the function is returning a `struct', then the first word
|
|
(which will be passed in r3) is used for struct return
|
|
address. In that case we should advance one word and start
|
|
from r4 register to copy parameters. */
|
|
if (struct_return)
|
|
{
|
|
if (write_pass)
|
|
regcache_cooked_write_signed (regcache,
|
|
tdep->ppc_gp0_regnum + greg,
|
|
struct_addr);
|
|
greg++;
|
|
}
|
|
|
|
for (argno = 0; argno < nargs; argno++)
|
|
{
|
|
struct value *arg = args[argno];
|
|
struct type *type = check_typedef (value_type (arg));
|
|
int len = TYPE_LENGTH (type);
|
|
const bfd_byte *val = value_contents (arg);
|
|
|
|
if (TYPE_CODE (type) == TYPE_CODE_FLT && len <= 8
|
|
&& !tdep->soft_float)
|
|
{
|
|
/* Floating point value converted to "double" then
|
|
passed in an FP register, when the registers run out,
|
|
8 byte aligned stack is used. */
|
|
if (freg <= 8)
|
|
{
|
|
if (write_pass)
|
|
{
|
|
/* Always store the floating point value using
|
|
the register's floating-point format. */
|
|
gdb_byte regval[MAX_REGISTER_SIZE];
|
|
struct type *regtype
|
|
= register_type (gdbarch, tdep->ppc_fp0_regnum + freg);
|
|
convert_typed_floating (val, type, regval, regtype);
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_fp0_regnum + freg,
|
|
regval);
|
|
}
|
|
freg++;
|
|
}
|
|
else
|
|
{
|
|
/* The SysV ABI tells us to convert floats to
|
|
doubles before writing them to an 8 byte aligned
|
|
stack location. Unfortunately GCC does not do
|
|
that, and stores floats into 4 byte aligned
|
|
locations without converting them to doubles.
|
|
Since there is no know compiler that actually
|
|
follows the ABI here, we implement the GCC
|
|
convention. */
|
|
|
|
/* Align to 4 bytes or 8 bytes depending on the type of
|
|
the argument (float or double). */
|
|
argoffset = align_up (argoffset, len);
|
|
if (write_pass)
|
|
write_memory (sp + argoffset, val, len);
|
|
argoffset += len;
|
|
}
|
|
}
|
|
else if (TYPE_CODE (type) == TYPE_CODE_FLT
|
|
&& len == 16
|
|
&& !tdep->soft_float
|
|
&& (gdbarch_long_double_format (gdbarch)
|
|
== floatformats_ibm_long_double))
|
|
{
|
|
/* IBM long double passed in two FP registers if
|
|
available, otherwise 8-byte aligned stack. */
|
|
if (freg <= 7)
|
|
{
|
|
if (write_pass)
|
|
{
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_fp0_regnum + freg,
|
|
val);
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_fp0_regnum + freg + 1,
|
|
val + 8);
|
|
}
|
|
freg += 2;
|
|
}
|
|
else
|
|
{
|
|
argoffset = align_up (argoffset, 8);
|
|
if (write_pass)
|
|
write_memory (sp + argoffset, val, len);
|
|
argoffset += 16;
|
|
}
|
|
}
|
|
else if (len == 8
|
|
&& (TYPE_CODE (type) == TYPE_CODE_INT /* long long */
|
|
|| TYPE_CODE (type) == TYPE_CODE_FLT /* double */
|
|
|| (TYPE_CODE (type) == TYPE_CODE_DECFLOAT
|
|
&& tdep->soft_float)))
|
|
{
|
|
/* "long long" or soft-float "double" or "_Decimal64"
|
|
passed in an odd/even register pair with the low
|
|
addressed word in the odd register and the high
|
|
addressed word in the even register, or when the
|
|
registers run out an 8 byte aligned stack
|
|
location. */
|
|
if (greg > 9)
|
|
{
|
|
/* Just in case GREG was 10. */
|
|
greg = 11;
|
|
argoffset = align_up (argoffset, 8);
|
|
if (write_pass)
|
|
write_memory (sp + argoffset, val, len);
|
|
argoffset += 8;
|
|
}
|
|
else
|
|
{
|
|
/* Must start on an odd register - r3/r4 etc. */
|
|
if ((greg & 1) == 0)
|
|
greg++;
|
|
if (write_pass)
|
|
{
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_gp0_regnum + greg + 0,
|
|
val + 0);
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_gp0_regnum + greg + 1,
|
|
val + 4);
|
|
}
|
|
greg += 2;
|
|
}
|
|
}
|
|
else if (len == 16
|
|
&& ((TYPE_CODE (type) == TYPE_CODE_FLT
|
|
&& (gdbarch_long_double_format (gdbarch)
|
|
== floatformats_ibm_long_double))
|
|
|| (TYPE_CODE (type) == TYPE_CODE_DECFLOAT
|
|
&& tdep->soft_float)))
|
|
{
|
|
/* Soft-float IBM long double or _Decimal128 passed in
|
|
four consecutive registers, or on the stack. The
|
|
registers are not necessarily odd/even pairs. */
|
|
if (greg > 7)
|
|
{
|
|
greg = 11;
|
|
argoffset = align_up (argoffset, 8);
|
|
if (write_pass)
|
|
write_memory (sp + argoffset, val, len);
|
|
argoffset += 16;
|
|
}
|
|
else
|
|
{
|
|
if (write_pass)
|
|
{
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_gp0_regnum + greg + 0,
|
|
val + 0);
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_gp0_regnum + greg + 1,
|
|
val + 4);
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_gp0_regnum + greg + 2,
|
|
val + 8);
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_gp0_regnum + greg + 3,
|
|
val + 12);
|
|
}
|
|
greg += 4;
|
|
}
|
|
}
|
|
else if (TYPE_CODE (type) == TYPE_CODE_DECFLOAT && len <= 8
|
|
&& !tdep->soft_float)
|
|
{
|
|
/* 32-bit and 64-bit decimal floats go in f1 .. f8. They can
|
|
end up in memory. */
|
|
|
|
if (freg <= 8)
|
|
{
|
|
if (write_pass)
|
|
{
|
|
gdb_byte regval[MAX_REGISTER_SIZE];
|
|
const gdb_byte *p;
|
|
|
|
/* 32-bit decimal floats are right aligned in the
|
|
doubleword. */
|
|
if (TYPE_LENGTH (type) == 4)
|
|
{
|
|
memcpy (regval + 4, val, 4);
|
|
p = regval;
|
|
}
|
|
else
|
|
p = val;
|
|
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_fp0_regnum + freg, p);
|
|
}
|
|
|
|
freg++;
|
|
}
|
|
else
|
|
{
|
|
argoffset = align_up (argoffset, len);
|
|
|
|
if (write_pass)
|
|
/* Write value in the stack's parameter save area. */
|
|
write_memory (sp + argoffset, val, len);
|
|
|
|
argoffset += len;
|
|
}
|
|
}
|
|
else if (TYPE_CODE (type) == TYPE_CODE_DECFLOAT && len == 16
|
|
&& !tdep->soft_float)
|
|
{
|
|
/* 128-bit decimal floats go in f2 .. f7, always in even/odd
|
|
pairs. They can end up in memory, using two doublewords. */
|
|
|
|
if (freg <= 6)
|
|
{
|
|
/* Make sure freg is even. */
|
|
freg += freg & 1;
|
|
|
|
if (write_pass)
|
|
{
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_fp0_regnum + freg, val);
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_fp0_regnum + freg + 1, val + 8);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
argoffset = align_up (argoffset, 8);
|
|
|
|
if (write_pass)
|
|
write_memory (sp + argoffset, val, 16);
|
|
|
|
argoffset += 16;
|
|
}
|
|
|
|
/* If a 128-bit decimal float goes to the stack because only f7
|
|
and f8 are free (thus there's no even/odd register pair
|
|
available), these registers should be marked as occupied.
|
|
Hence we increase freg even when writing to memory. */
|
|
freg += 2;
|
|
}
|
|
else if (len == 16
|
|
&& TYPE_CODE (type) == TYPE_CODE_ARRAY
|
|
&& TYPE_VECTOR (type)
|
|
&& tdep->vector_abi == POWERPC_VEC_ALTIVEC)
|
|
{
|
|
/* Vector parameter passed in an Altivec register, or
|
|
when that runs out, 16 byte aligned stack location. */
|
|
if (vreg <= 13)
|
|
{
|
|
if (write_pass)
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_vr0_regnum + vreg, val);
|
|
vreg++;
|
|
}
|
|
else
|
|
{
|
|
argoffset = align_up (argoffset, 16);
|
|
if (write_pass)
|
|
write_memory (sp + argoffset, val, 16);
|
|
argoffset += 16;
|
|
}
|
|
}
|
|
else if (len == 8
|
|
&& TYPE_CODE (type) == TYPE_CODE_ARRAY
|
|
&& TYPE_VECTOR (type)
|
|
&& tdep->vector_abi == POWERPC_VEC_SPE)
|
|
{
|
|
/* Vector parameter passed in an e500 register, or when
|
|
that runs out, 8 byte aligned stack location. Note
|
|
that since e500 vector and general purpose registers
|
|
both map onto the same underlying register set, a
|
|
"greg" and not a "vreg" is consumed here. A cooked
|
|
write stores the value in the correct locations
|
|
within the raw register cache. */
|
|
if (greg <= 10)
|
|
{
|
|
if (write_pass)
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_ev0_regnum + greg, val);
|
|
greg++;
|
|
}
|
|
else
|
|
{
|
|
argoffset = align_up (argoffset, 8);
|
|
if (write_pass)
|
|
write_memory (sp + argoffset, val, 8);
|
|
argoffset += 8;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Reduce the parameter down to something that fits in a
|
|
"word". */
|
|
gdb_byte word[MAX_REGISTER_SIZE];
|
|
memset (word, 0, MAX_REGISTER_SIZE);
|
|
if (len > tdep->wordsize
|
|
|| TYPE_CODE (type) == TYPE_CODE_STRUCT
|
|
|| TYPE_CODE (type) == TYPE_CODE_UNION)
|
|
{
|
|
/* Structs and large values are put in an
|
|
aligned stack slot ... */
|
|
if (TYPE_CODE (type) == TYPE_CODE_ARRAY
|
|
&& TYPE_VECTOR (type)
|
|
&& len >= 16)
|
|
structoffset = align_up (structoffset, 16);
|
|
else
|
|
structoffset = align_up (structoffset, 8);
|
|
|
|
if (write_pass)
|
|
write_memory (sp + structoffset, val, len);
|
|
/* ... and then a "word" pointing to that address is
|
|
passed as the parameter. */
|
|
store_unsigned_integer (word, tdep->wordsize, byte_order,
|
|
sp + structoffset);
|
|
structoffset += len;
|
|
}
|
|
else if (TYPE_CODE (type) == TYPE_CODE_INT)
|
|
/* Sign or zero extend the "int" into a "word". */
|
|
store_unsigned_integer (word, tdep->wordsize, byte_order,
|
|
unpack_long (type, val));
|
|
else
|
|
/* Always goes in the low address. */
|
|
memcpy (word, val, len);
|
|
/* Store that "word" in a register, or on the stack.
|
|
The words have "4" byte alignment. */
|
|
if (greg <= 10)
|
|
{
|
|
if (write_pass)
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_gp0_regnum + greg, word);
|
|
greg++;
|
|
}
|
|
else
|
|
{
|
|
argoffset = align_up (argoffset, tdep->wordsize);
|
|
if (write_pass)
|
|
write_memory (sp + argoffset, word, tdep->wordsize);
|
|
argoffset += tdep->wordsize;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Compute the actual stack space requirements. */
|
|
if (!write_pass)
|
|
{
|
|
/* Remember the amount of space needed by the arguments. */
|
|
argspace = argoffset;
|
|
/* Allocate space for both the arguments and the structures. */
|
|
sp -= (argoffset + structoffset);
|
|
/* Ensure that the stack is still 16 byte aligned. */
|
|
sp = align_down (sp, 16);
|
|
}
|
|
|
|
/* The psABI says that "A caller of a function that takes a
|
|
variable argument list shall set condition register bit 6 to
|
|
1 if it passes one or more arguments in the floating-point
|
|
registers. It is strongly recommended that the caller set the
|
|
bit to 0 otherwise..." Doing this for normal functions too
|
|
shouldn't hurt. */
|
|
if (write_pass)
|
|
{
|
|
ULONGEST cr;
|
|
|
|
regcache_cooked_read_unsigned (regcache, tdep->ppc_cr_regnum, &cr);
|
|
if (freg > 1)
|
|
cr |= 0x02000000;
|
|
else
|
|
cr &= ~0x02000000;
|
|
regcache_cooked_write_unsigned (regcache, tdep->ppc_cr_regnum, cr);
|
|
}
|
|
}
|
|
|
|
/* Update %sp. */
|
|
regcache_cooked_write_signed (regcache, gdbarch_sp_regnum (gdbarch), sp);
|
|
|
|
/* Write the backchain (it occupies WORDSIZED bytes). */
|
|
write_memory_signed_integer (sp, tdep->wordsize, byte_order, saved_sp);
|
|
|
|
/* Point the inferior function call's return address at the dummy's
|
|
breakpoint. */
|
|
regcache_cooked_write_signed (regcache, tdep->ppc_lr_regnum, bp_addr);
|
|
|
|
return sp;
|
|
}
|
|
|
|
/* Handle the return-value conventions for Decimal Floating Point values
|
|
in both ppc32 and ppc64, which are the same. */
|
|
static int
|
|
get_decimal_float_return_value (struct gdbarch *gdbarch, struct type *valtype,
|
|
struct regcache *regcache, gdb_byte *readbuf,
|
|
const gdb_byte *writebuf)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
gdb_assert (TYPE_CODE (valtype) == TYPE_CODE_DECFLOAT);
|
|
|
|
/* 32-bit and 64-bit decimal floats in f1. */
|
|
if (TYPE_LENGTH (valtype) <= 8)
|
|
{
|
|
if (writebuf != NULL)
|
|
{
|
|
gdb_byte regval[MAX_REGISTER_SIZE];
|
|
const gdb_byte *p;
|
|
|
|
/* 32-bit decimal float is right aligned in the doubleword. */
|
|
if (TYPE_LENGTH (valtype) == 4)
|
|
{
|
|
memcpy (regval + 4, writebuf, 4);
|
|
p = regval;
|
|
}
|
|
else
|
|
p = writebuf;
|
|
|
|
regcache_cooked_write (regcache, tdep->ppc_fp0_regnum + 1, p);
|
|
}
|
|
if (readbuf != NULL)
|
|
{
|
|
regcache_cooked_read (regcache, tdep->ppc_fp0_regnum + 1, readbuf);
|
|
|
|
/* Left align 32-bit decimal float. */
|
|
if (TYPE_LENGTH (valtype) == 4)
|
|
memcpy (readbuf, readbuf + 4, 4);
|
|
}
|
|
}
|
|
/* 128-bit decimal floats in f2,f3. */
|
|
else if (TYPE_LENGTH (valtype) == 16)
|
|
{
|
|
if (writebuf != NULL || readbuf != NULL)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 2; i++)
|
|
{
|
|
if (writebuf != NULL)
|
|
regcache_cooked_write (regcache, tdep->ppc_fp0_regnum + 2 + i,
|
|
writebuf + i * 8);
|
|
if (readbuf != NULL)
|
|
regcache_cooked_read (regcache, tdep->ppc_fp0_regnum + 2 + i,
|
|
readbuf + i * 8);
|
|
}
|
|
}
|
|
}
|
|
else
|
|
/* Can't happen. */
|
|
internal_error (__FILE__, __LINE__, "Unknown decimal float size.");
|
|
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
|
|
/* Handle the return-value conventions specified by the SysV 32-bit
|
|
PowerPC ABI (including all the supplements):
|
|
|
|
no floating-point: floating-point values returned using 32-bit
|
|
general-purpose registers.
|
|
|
|
Altivec: 128-bit vectors returned using vector registers.
|
|
|
|
e500: 64-bit vectors returned using the full full 64 bit EV
|
|
register, floating-point values returned using 32-bit
|
|
general-purpose registers.
|
|
|
|
GCC (broken): Small struct values right (instead of left) aligned
|
|
when returned in general-purpose registers. */
|
|
|
|
static enum return_value_convention
|
|
do_ppc_sysv_return_value (struct gdbarch *gdbarch, struct type *type,
|
|
struct regcache *regcache, gdb_byte *readbuf,
|
|
const gdb_byte *writebuf, int broken_gcc)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
gdb_assert (tdep->wordsize == 4);
|
|
if (TYPE_CODE (type) == TYPE_CODE_FLT
|
|
&& TYPE_LENGTH (type) <= 8
|
|
&& !tdep->soft_float)
|
|
{
|
|
if (readbuf)
|
|
{
|
|
/* Floats and doubles stored in "f1". Convert the value to
|
|
the required type. */
|
|
gdb_byte regval[MAX_REGISTER_SIZE];
|
|
struct type *regtype = register_type (gdbarch,
|
|
tdep->ppc_fp0_regnum + 1);
|
|
regcache_cooked_read (regcache, tdep->ppc_fp0_regnum + 1, regval);
|
|
convert_typed_floating (regval, regtype, readbuf, type);
|
|
}
|
|
if (writebuf)
|
|
{
|
|
/* Floats and doubles stored in "f1". Convert the value to
|
|
the register's "double" type. */
|
|
gdb_byte regval[MAX_REGISTER_SIZE];
|
|
struct type *regtype = register_type (gdbarch, tdep->ppc_fp0_regnum);
|
|
convert_typed_floating (writebuf, type, regval, regtype);
|
|
regcache_cooked_write (regcache, tdep->ppc_fp0_regnum + 1, regval);
|
|
}
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
if (TYPE_CODE (type) == TYPE_CODE_FLT
|
|
&& TYPE_LENGTH (type) == 16
|
|
&& !tdep->soft_float
|
|
&& (gdbarch_long_double_format (gdbarch) == floatformats_ibm_long_double))
|
|
{
|
|
/* IBM long double stored in f1 and f2. */
|
|
if (readbuf)
|
|
{
|
|
regcache_cooked_read (regcache, tdep->ppc_fp0_regnum + 1, readbuf);
|
|
regcache_cooked_read (regcache, tdep->ppc_fp0_regnum + 2,
|
|
readbuf + 8);
|
|
}
|
|
if (writebuf)
|
|
{
|
|
regcache_cooked_write (regcache, tdep->ppc_fp0_regnum + 1, writebuf);
|
|
regcache_cooked_write (regcache, tdep->ppc_fp0_regnum + 2,
|
|
writebuf + 8);
|
|
}
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
if (TYPE_LENGTH (type) == 16
|
|
&& ((TYPE_CODE (type) == TYPE_CODE_FLT
|
|
&& (gdbarch_long_double_format (gdbarch) == floatformats_ibm_long_double))
|
|
|| (TYPE_CODE (type) == TYPE_CODE_DECFLOAT && tdep->soft_float)))
|
|
{
|
|
/* Soft-float IBM long double or _Decimal128 stored in r3, r4,
|
|
r5, r6. */
|
|
if (readbuf)
|
|
{
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 3, readbuf);
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 4,
|
|
readbuf + 4);
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 5,
|
|
readbuf + 8);
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 6,
|
|
readbuf + 12);
|
|
}
|
|
if (writebuf)
|
|
{
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 3, writebuf);
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 4,
|
|
writebuf + 4);
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 5,
|
|
writebuf + 8);
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 6,
|
|
writebuf + 12);
|
|
}
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
if ((TYPE_CODE (type) == TYPE_CODE_INT && TYPE_LENGTH (type) == 8)
|
|
|| (TYPE_CODE (type) == TYPE_CODE_FLT && TYPE_LENGTH (type) == 8)
|
|
|| (TYPE_CODE (type) == TYPE_CODE_DECFLOAT && TYPE_LENGTH (type) == 8
|
|
&& tdep->soft_float))
|
|
{
|
|
if (readbuf)
|
|
{
|
|
/* A long long, double or _Decimal64 stored in the 32 bit
|
|
r3/r4. */
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 3,
|
|
readbuf + 0);
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 4,
|
|
readbuf + 4);
|
|
}
|
|
if (writebuf)
|
|
{
|
|
/* A long long, double or _Decimal64 stored in the 32 bit
|
|
r3/r4. */
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 3,
|
|
writebuf + 0);
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 4,
|
|
writebuf + 4);
|
|
}
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
if (TYPE_CODE (type) == TYPE_CODE_DECFLOAT && !tdep->soft_float)
|
|
return get_decimal_float_return_value (gdbarch, type, regcache, readbuf,
|
|
writebuf);
|
|
else if ((TYPE_CODE (type) == TYPE_CODE_INT
|
|
|| TYPE_CODE (type) == TYPE_CODE_CHAR
|
|
|| TYPE_CODE (type) == TYPE_CODE_BOOL
|
|
|| TYPE_CODE (type) == TYPE_CODE_PTR
|
|
|| TYPE_CODE (type) == TYPE_CODE_REF
|
|
|| TYPE_CODE (type) == TYPE_CODE_ENUM)
|
|
&& TYPE_LENGTH (type) <= tdep->wordsize)
|
|
{
|
|
if (readbuf)
|
|
{
|
|
/* Some sort of integer stored in r3. Since TYPE isn't
|
|
bigger than the register, sign extension isn't a problem
|
|
- just do everything unsigned. */
|
|
ULONGEST regval;
|
|
regcache_cooked_read_unsigned (regcache, tdep->ppc_gp0_regnum + 3,
|
|
®val);
|
|
store_unsigned_integer (readbuf, TYPE_LENGTH (type), byte_order,
|
|
regval);
|
|
}
|
|
if (writebuf)
|
|
{
|
|
/* Some sort of integer stored in r3. Use unpack_long since
|
|
that should handle any required sign extension. */
|
|
regcache_cooked_write_unsigned (regcache, tdep->ppc_gp0_regnum + 3,
|
|
unpack_long (type, writebuf));
|
|
}
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
if (TYPE_LENGTH (type) == 16
|
|
&& TYPE_CODE (type) == TYPE_CODE_ARRAY
|
|
&& TYPE_VECTOR (type)
|
|
&& tdep->vector_abi == POWERPC_VEC_ALTIVEC)
|
|
{
|
|
if (readbuf)
|
|
{
|
|
/* Altivec places the return value in "v2". */
|
|
regcache_cooked_read (regcache, tdep->ppc_vr0_regnum + 2, readbuf);
|
|
}
|
|
if (writebuf)
|
|
{
|
|
/* Altivec places the return value in "v2". */
|
|
regcache_cooked_write (regcache, tdep->ppc_vr0_regnum + 2, writebuf);
|
|
}
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
if (TYPE_LENGTH (type) == 16
|
|
&& TYPE_CODE (type) == TYPE_CODE_ARRAY
|
|
&& TYPE_VECTOR (type)
|
|
&& tdep->vector_abi == POWERPC_VEC_GENERIC)
|
|
{
|
|
/* GCC -maltivec -mabi=no-altivec returns vectors in r3/r4/r5/r6.
|
|
GCC without AltiVec returns them in memory, but it warns about
|
|
ABI risks in that case; we don't try to support it. */
|
|
if (readbuf)
|
|
{
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 3,
|
|
readbuf + 0);
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 4,
|
|
readbuf + 4);
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 5,
|
|
readbuf + 8);
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 6,
|
|
readbuf + 12);
|
|
}
|
|
if (writebuf)
|
|
{
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 3,
|
|
writebuf + 0);
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 4,
|
|
writebuf + 4);
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 5,
|
|
writebuf + 8);
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 6,
|
|
writebuf + 12);
|
|
}
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
if (TYPE_LENGTH (type) == 8
|
|
&& TYPE_CODE (type) == TYPE_CODE_ARRAY
|
|
&& TYPE_VECTOR (type)
|
|
&& tdep->vector_abi == POWERPC_VEC_SPE)
|
|
{
|
|
/* The e500 ABI places return values for the 64-bit DSP types
|
|
(__ev64_opaque__) in r3. However, in GDB-speak, ev3
|
|
corresponds to the entire r3 value for e500, whereas GDB's r3
|
|
only corresponds to the least significant 32-bits. So place
|
|
the 64-bit DSP type's value in ev3. */
|
|
if (readbuf)
|
|
regcache_cooked_read (regcache, tdep->ppc_ev0_regnum + 3, readbuf);
|
|
if (writebuf)
|
|
regcache_cooked_write (regcache, tdep->ppc_ev0_regnum + 3, writebuf);
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
if (broken_gcc && TYPE_LENGTH (type) <= 8)
|
|
{
|
|
/* GCC screwed up for structures or unions whose size is less
|
|
than or equal to 8 bytes.. Instead of left-aligning, it
|
|
right-aligns the data into the buffer formed by r3, r4. */
|
|
gdb_byte regvals[MAX_REGISTER_SIZE * 2];
|
|
int len = TYPE_LENGTH (type);
|
|
int offset = (2 * tdep->wordsize - len) % tdep->wordsize;
|
|
|
|
if (readbuf)
|
|
{
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 3,
|
|
regvals + 0 * tdep->wordsize);
|
|
if (len > tdep->wordsize)
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 4,
|
|
regvals + 1 * tdep->wordsize);
|
|
memcpy (readbuf, regvals + offset, len);
|
|
}
|
|
if (writebuf)
|
|
{
|
|
memset (regvals, 0, sizeof regvals);
|
|
memcpy (regvals + offset, writebuf, len);
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 3,
|
|
regvals + 0 * tdep->wordsize);
|
|
if (len > tdep->wordsize)
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 4,
|
|
regvals + 1 * tdep->wordsize);
|
|
}
|
|
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
if (TYPE_LENGTH (type) <= 8)
|
|
{
|
|
if (readbuf)
|
|
{
|
|
/* This matches SVr4 PPC, it does not match GCC. */
|
|
/* The value is right-padded to 8 bytes and then loaded, as
|
|
two "words", into r3/r4. */
|
|
gdb_byte regvals[MAX_REGISTER_SIZE * 2];
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 3,
|
|
regvals + 0 * tdep->wordsize);
|
|
if (TYPE_LENGTH (type) > tdep->wordsize)
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 4,
|
|
regvals + 1 * tdep->wordsize);
|
|
memcpy (readbuf, regvals, TYPE_LENGTH (type));
|
|
}
|
|
if (writebuf)
|
|
{
|
|
/* This matches SVr4 PPC, it does not match GCC. */
|
|
/* The value is padded out to 8 bytes and then loaded, as
|
|
two "words" into r3/r4. */
|
|
gdb_byte regvals[MAX_REGISTER_SIZE * 2];
|
|
memset (regvals, 0, sizeof regvals);
|
|
memcpy (regvals, writebuf, TYPE_LENGTH (type));
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 3,
|
|
regvals + 0 * tdep->wordsize);
|
|
if (TYPE_LENGTH (type) > tdep->wordsize)
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 4,
|
|
regvals + 1 * tdep->wordsize);
|
|
}
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
return RETURN_VALUE_STRUCT_CONVENTION;
|
|
}
|
|
|
|
enum return_value_convention
|
|
ppc_sysv_abi_return_value (struct gdbarch *gdbarch, struct type *func_type,
|
|
struct type *valtype, struct regcache *regcache,
|
|
gdb_byte *readbuf, const gdb_byte *writebuf)
|
|
{
|
|
return do_ppc_sysv_return_value (gdbarch, valtype, regcache, readbuf,
|
|
writebuf, 0);
|
|
}
|
|
|
|
enum return_value_convention
|
|
ppc_sysv_abi_broken_return_value (struct gdbarch *gdbarch,
|
|
struct type *func_type,
|
|
struct type *valtype,
|
|
struct regcache *regcache,
|
|
gdb_byte *readbuf, const gdb_byte *writebuf)
|
|
{
|
|
return do_ppc_sysv_return_value (gdbarch, valtype, regcache, readbuf,
|
|
writebuf, 1);
|
|
}
|
|
|
|
/* The helper function for 64-bit SYSV push_dummy_call. Converts the
|
|
function's code address back into the function's descriptor
|
|
address.
|
|
|
|
Find a value for the TOC register. Every symbol should have both
|
|
".FN" and "FN" in the minimal symbol table. "FN" points at the
|
|
FN's descriptor, while ".FN" points at the entry point (which
|
|
matches FUNC_ADDR). Need to reverse from FUNC_ADDR back to the
|
|
FN's descriptor address (while at the same time being careful to
|
|
find "FN" in the same object file as ".FN"). */
|
|
|
|
static int
|
|
convert_code_addr_to_desc_addr (CORE_ADDR code_addr, CORE_ADDR *desc_addr)
|
|
{
|
|
struct obj_section *dot_fn_section;
|
|
struct minimal_symbol *dot_fn;
|
|
struct minimal_symbol *fn;
|
|
CORE_ADDR toc;
|
|
/* Find the minimal symbol that corresponds to CODE_ADDR (should
|
|
have a name of the form ".FN"). */
|
|
dot_fn = lookup_minimal_symbol_by_pc (code_addr);
|
|
if (dot_fn == NULL || SYMBOL_LINKAGE_NAME (dot_fn)[0] != '.')
|
|
return 0;
|
|
/* Get the section that contains CODE_ADDR. Need this for the
|
|
"objfile" that it contains. */
|
|
dot_fn_section = find_pc_section (code_addr);
|
|
if (dot_fn_section == NULL || dot_fn_section->objfile == NULL)
|
|
return 0;
|
|
/* Now find the corresponding "FN" (dropping ".") minimal symbol's
|
|
address. Only look for the minimal symbol in ".FN"'s object file
|
|
- avoids problems when two object files (i.e., shared libraries)
|
|
contain a minimal symbol with the same name. */
|
|
fn = lookup_minimal_symbol (SYMBOL_LINKAGE_NAME (dot_fn) + 1, NULL,
|
|
dot_fn_section->objfile);
|
|
if (fn == NULL)
|
|
return 0;
|
|
/* Found a descriptor. */
|
|
(*desc_addr) = SYMBOL_VALUE_ADDRESS (fn);
|
|
return 1;
|
|
}
|
|
|
|
/* Pass the arguments in either registers, or in the stack. Using the
|
|
ppc 64 bit SysV ABI.
|
|
|
|
This implements a dumbed down version of the ABI. It always writes
|
|
values to memory, GPR and FPR, even when not necessary. Doing this
|
|
greatly simplifies the logic. */
|
|
|
|
CORE_ADDR
|
|
ppc64_sysv_abi_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
|
|
struct regcache *regcache, CORE_ADDR bp_addr,
|
|
int nargs, struct value **args, CORE_ADDR sp,
|
|
int struct_return, CORE_ADDR struct_addr)
|
|
{
|
|
CORE_ADDR func_addr = find_function_addr (function, NULL);
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
ULONGEST back_chain;
|
|
/* See for-loop comment below. */
|
|
int write_pass;
|
|
/* Size of the Altivec's vector parameter region, the final value is
|
|
computed in the for-loop below. */
|
|
LONGEST vparam_size = 0;
|
|
/* Size of the general parameter region, the final value is computed
|
|
in the for-loop below. */
|
|
LONGEST gparam_size = 0;
|
|
/* Kevin writes ... I don't mind seeing tdep->wordsize used in the
|
|
calls to align_up(), align_down(), etc. because this makes it
|
|
easier to reuse this code (in a copy/paste sense) in the future,
|
|
but it is a 64-bit ABI and asserting that the wordsize is 8 bytes
|
|
at some point makes it easier to verify that this function is
|
|
correct without having to do a non-local analysis to figure out
|
|
the possible values of tdep->wordsize. */
|
|
gdb_assert (tdep->wordsize == 8);
|
|
|
|
/* This function exists to support a calling convention that
|
|
requires floating-point registers. It shouldn't be used on
|
|
processors that lack them. */
|
|
gdb_assert (ppc_floating_point_unit_p (gdbarch));
|
|
|
|
/* By this stage in the proceedings, SP has been decremented by "red
|
|
zone size" + "struct return size". Fetch the stack-pointer from
|
|
before this and use that as the BACK_CHAIN. */
|
|
regcache_cooked_read_unsigned (regcache, gdbarch_sp_regnum (gdbarch),
|
|
&back_chain);
|
|
|
|
/* Go through the argument list twice.
|
|
|
|
Pass 1: Compute the function call's stack space and register
|
|
requirements.
|
|
|
|
Pass 2: Replay the same computation but this time also write the
|
|
values out to the target. */
|
|
|
|
for (write_pass = 0; write_pass < 2; write_pass++)
|
|
{
|
|
int argno;
|
|
/* Next available floating point register for float and double
|
|
arguments. */
|
|
int freg = 1;
|
|
/* Next available general register for non-vector (but possibly
|
|
float) arguments. */
|
|
int greg = 3;
|
|
/* Next available vector register for vector arguments. */
|
|
int vreg = 2;
|
|
/* The address, at which the next general purpose parameter
|
|
(integer, struct, float, ...) should be saved. */
|
|
CORE_ADDR gparam;
|
|
/* Address, at which the next Altivec vector parameter should be
|
|
saved. */
|
|
CORE_ADDR vparam;
|
|
|
|
if (!write_pass)
|
|
{
|
|
/* During the first pass, GPARAM and VPARAM are more like
|
|
offsets (start address zero) than addresses. That way
|
|
they accumulate the total stack space each region
|
|
requires. */
|
|
gparam = 0;
|
|
vparam = 0;
|
|
}
|
|
else
|
|
{
|
|
/* Decrement the stack pointer making space for the Altivec
|
|
and general on-stack parameters. Set vparam and gparam
|
|
to their corresponding regions. */
|
|
vparam = align_down (sp - vparam_size, 16);
|
|
gparam = align_down (vparam - gparam_size, 16);
|
|
/* Add in space for the TOC, link editor double word,
|
|
compiler double word, LR save area, CR save area. */
|
|
sp = align_down (gparam - 48, 16);
|
|
}
|
|
|
|
/* If the function is returning a `struct', then there is an
|
|
extra hidden parameter (which will be passed in r3)
|
|
containing the address of that struct.. In that case we
|
|
should advance one word and start from r4 register to copy
|
|
parameters. This also consumes one on-stack parameter slot. */
|
|
if (struct_return)
|
|
{
|
|
if (write_pass)
|
|
regcache_cooked_write_signed (regcache,
|
|
tdep->ppc_gp0_regnum + greg,
|
|
struct_addr);
|
|
greg++;
|
|
gparam = align_up (gparam + tdep->wordsize, tdep->wordsize);
|
|
}
|
|
|
|
for (argno = 0; argno < nargs; argno++)
|
|
{
|
|
struct value *arg = args[argno];
|
|
struct type *type = check_typedef (value_type (arg));
|
|
const bfd_byte *val = value_contents (arg);
|
|
|
|
if (TYPE_CODE (type) == TYPE_CODE_FLT && TYPE_LENGTH (type) <= 8)
|
|
{
|
|
/* Floats and Doubles go in f1 .. f13. They also
|
|
consume a left aligned GREG,, and can end up in
|
|
memory. */
|
|
if (write_pass)
|
|
{
|
|
gdb_byte regval[MAX_REGISTER_SIZE];
|
|
const gdb_byte *p;
|
|
|
|
/* Version 1.7 of the 64-bit PowerPC ELF ABI says:
|
|
|
|
"Single precision floating point values are mapped to
|
|
the first word in a single doubleword."
|
|
|
|
And version 1.9 says:
|
|
|
|
"Single precision floating point values are mapped to
|
|
the second word in a single doubleword."
|
|
|
|
GDB then writes single precision floating point values
|
|
at both words in a doubleword, to support both ABIs. */
|
|
if (TYPE_LENGTH (type) == 4)
|
|
{
|
|
memcpy (regval, val, 4);
|
|
memcpy (regval + 4, val, 4);
|
|
p = regval;
|
|
}
|
|
else
|
|
p = val;
|
|
|
|
/* Write value in the stack's parameter save area. */
|
|
write_memory (gparam, p, 8);
|
|
|
|
if (freg <= 13)
|
|
{
|
|
struct type *regtype
|
|
= register_type (gdbarch, tdep->ppc_fp0_regnum);
|
|
|
|
convert_typed_floating (val, type, regval, regtype);
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_fp0_regnum + freg,
|
|
regval);
|
|
}
|
|
if (greg <= 10)
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_gp0_regnum + greg,
|
|
regval);
|
|
}
|
|
|
|
freg++;
|
|
greg++;
|
|
/* Always consume parameter stack space. */
|
|
gparam = align_up (gparam + 8, tdep->wordsize);
|
|
}
|
|
else if (TYPE_CODE (type) == TYPE_CODE_FLT
|
|
&& TYPE_LENGTH (type) == 16
|
|
&& (gdbarch_long_double_format (gdbarch)
|
|
== floatformats_ibm_long_double))
|
|
{
|
|
/* IBM long double stored in two doublewords of the
|
|
parameter save area and corresponding registers. */
|
|
if (write_pass)
|
|
{
|
|
if (!tdep->soft_float && freg <= 13)
|
|
{
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_fp0_regnum + freg,
|
|
val);
|
|
if (freg <= 12)
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_fp0_regnum + freg + 1,
|
|
val + 8);
|
|
}
|
|
if (greg <= 10)
|
|
{
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_gp0_regnum + greg,
|
|
val);
|
|
if (greg <= 9)
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_gp0_regnum + greg + 1,
|
|
val + 8);
|
|
}
|
|
write_memory (gparam, val, TYPE_LENGTH (type));
|
|
}
|
|
freg += 2;
|
|
greg += 2;
|
|
gparam = align_up (gparam + TYPE_LENGTH (type), tdep->wordsize);
|
|
}
|
|
else if (TYPE_CODE (type) == TYPE_CODE_DECFLOAT
|
|
&& TYPE_LENGTH (type) <= 8)
|
|
{
|
|
/* 32-bit and 64-bit decimal floats go in f1 .. f13. They can
|
|
end up in memory. */
|
|
if (write_pass)
|
|
{
|
|
gdb_byte regval[MAX_REGISTER_SIZE];
|
|
const gdb_byte *p;
|
|
|
|
/* 32-bit decimal floats are right aligned in the
|
|
doubleword. */
|
|
if (TYPE_LENGTH (type) == 4)
|
|
{
|
|
memcpy (regval + 4, val, 4);
|
|
p = regval;
|
|
}
|
|
else
|
|
p = val;
|
|
|
|
/* Write value in the stack's parameter save area. */
|
|
write_memory (gparam, p, 8);
|
|
|
|
if (freg <= 13)
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_fp0_regnum + freg, p);
|
|
}
|
|
|
|
freg++;
|
|
greg++;
|
|
/* Always consume parameter stack space. */
|
|
gparam = align_up (gparam + 8, tdep->wordsize);
|
|
}
|
|
else if (TYPE_CODE (type) == TYPE_CODE_DECFLOAT &&
|
|
TYPE_LENGTH (type) == 16)
|
|
{
|
|
/* 128-bit decimal floats go in f2 .. f12, always in even/odd
|
|
pairs. They can end up in memory, using two doublewords. */
|
|
if (write_pass)
|
|
{
|
|
if (freg <= 12)
|
|
{
|
|
/* Make sure freg is even. */
|
|
freg += freg & 1;
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_fp0_regnum + freg, val);
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_fp0_regnum + freg + 1, val + 8);
|
|
}
|
|
|
|
write_memory (gparam, val, TYPE_LENGTH (type));
|
|
}
|
|
|
|
freg += 2;
|
|
greg += 2;
|
|
gparam = align_up (gparam + TYPE_LENGTH (type), tdep->wordsize);
|
|
}
|
|
else if (TYPE_LENGTH (type) == 16 && TYPE_VECTOR (type)
|
|
&& TYPE_CODE (type) == TYPE_CODE_ARRAY
|
|
&& tdep->ppc_vr0_regnum >= 0)
|
|
{
|
|
/* In the Altivec ABI, vectors go in the vector
|
|
registers v2 .. v13, or when that runs out, a vector
|
|
annex which goes above all the normal parameters.
|
|
NOTE: cagney/2003-09-21: This is a guess based on the
|
|
PowerOpen Altivec ABI. */
|
|
if (vreg <= 13)
|
|
{
|
|
if (write_pass)
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_vr0_regnum + vreg, val);
|
|
vreg++;
|
|
}
|
|
else
|
|
{
|
|
if (write_pass)
|
|
write_memory (vparam, val, TYPE_LENGTH (type));
|
|
vparam = align_up (vparam + TYPE_LENGTH (type), 16);
|
|
}
|
|
}
|
|
else if ((TYPE_CODE (type) == TYPE_CODE_INT
|
|
|| TYPE_CODE (type) == TYPE_CODE_ENUM
|
|
|| TYPE_CODE (type) == TYPE_CODE_BOOL
|
|
|| TYPE_CODE (type) == TYPE_CODE_CHAR
|
|
|| TYPE_CODE (type) == TYPE_CODE_PTR
|
|
|| TYPE_CODE (type) == TYPE_CODE_REF)
|
|
&& TYPE_LENGTH (type) <= 8)
|
|
{
|
|
/* Scalars and Pointers get sign[un]extended and go in
|
|
gpr3 .. gpr10. They can also end up in memory. */
|
|
if (write_pass)
|
|
{
|
|
/* Sign extend the value, then store it unsigned. */
|
|
ULONGEST word = unpack_long (type, val);
|
|
/* Convert any function code addresses into
|
|
descriptors. */
|
|
if (TYPE_CODE (type) == TYPE_CODE_PTR
|
|
|| TYPE_CODE (type) == TYPE_CODE_REF)
|
|
{
|
|
struct type *target_type;
|
|
target_type = check_typedef (TYPE_TARGET_TYPE (type));
|
|
|
|
if (TYPE_CODE (target_type) == TYPE_CODE_FUNC
|
|
|| TYPE_CODE (target_type) == TYPE_CODE_METHOD)
|
|
{
|
|
CORE_ADDR desc = word;
|
|
convert_code_addr_to_desc_addr (word, &desc);
|
|
word = desc;
|
|
}
|
|
}
|
|
if (greg <= 10)
|
|
regcache_cooked_write_unsigned (regcache,
|
|
tdep->ppc_gp0_regnum +
|
|
greg, word);
|
|
write_memory_unsigned_integer (gparam, tdep->wordsize,
|
|
byte_order, word);
|
|
}
|
|
greg++;
|
|
gparam = align_up (gparam + TYPE_LENGTH (type), tdep->wordsize);
|
|
}
|
|
else
|
|
{
|
|
int byte;
|
|
for (byte = 0; byte < TYPE_LENGTH (type);
|
|
byte += tdep->wordsize)
|
|
{
|
|
if (write_pass && greg <= 10)
|
|
{
|
|
gdb_byte regval[MAX_REGISTER_SIZE];
|
|
int len = TYPE_LENGTH (type) - byte;
|
|
if (len > tdep->wordsize)
|
|
len = tdep->wordsize;
|
|
memset (regval, 0, sizeof regval);
|
|
/* The ABI (version 1.9) specifies that values
|
|
smaller than one doubleword are right-aligned
|
|
and those larger are left-aligned. GCC
|
|
versions before 3.4 implemented this
|
|
incorrectly; see
|
|
<http://gcc.gnu.org/gcc-3.4/powerpc-abi.html>. */
|
|
if (byte == 0)
|
|
memcpy (regval + tdep->wordsize - len,
|
|
val + byte, len);
|
|
else
|
|
memcpy (regval, val + byte, len);
|
|
regcache_cooked_write (regcache, greg, regval);
|
|
}
|
|
greg++;
|
|
}
|
|
if (write_pass)
|
|
{
|
|
/* WARNING: cagney/2003-09-21: Strictly speaking, this
|
|
isn't necessary, unfortunately, GCC appears to get
|
|
"struct convention" parameter passing wrong putting
|
|
odd sized structures in memory instead of in a
|
|
register. Work around this by always writing the
|
|
value to memory. Fortunately, doing this
|
|
simplifies the code. */
|
|
int len = TYPE_LENGTH (type);
|
|
if (len < tdep->wordsize)
|
|
write_memory (gparam + tdep->wordsize - len, val, len);
|
|
else
|
|
write_memory (gparam, val, len);
|
|
}
|
|
if (freg <= 13
|
|
&& TYPE_CODE (type) == TYPE_CODE_STRUCT
|
|
&& TYPE_NFIELDS (type) == 1
|
|
&& TYPE_LENGTH (type) <= 16)
|
|
{
|
|
/* The ABI (version 1.9) specifies that structs
|
|
containing a single floating-point value, at any
|
|
level of nesting of single-member structs, are
|
|
passed in floating-point registers. */
|
|
while (TYPE_CODE (type) == TYPE_CODE_STRUCT
|
|
&& TYPE_NFIELDS (type) == 1)
|
|
type = check_typedef (TYPE_FIELD_TYPE (type, 0));
|
|
if (TYPE_CODE (type) == TYPE_CODE_FLT)
|
|
{
|
|
if (TYPE_LENGTH (type) <= 8)
|
|
{
|
|
if (write_pass)
|
|
{
|
|
gdb_byte regval[MAX_REGISTER_SIZE];
|
|
struct type *regtype
|
|
= register_type (gdbarch,
|
|
tdep->ppc_fp0_regnum);
|
|
convert_typed_floating (val, type, regval,
|
|
regtype);
|
|
regcache_cooked_write (regcache,
|
|
(tdep->ppc_fp0_regnum
|
|
+ freg),
|
|
regval);
|
|
}
|
|
freg++;
|
|
}
|
|
else if (TYPE_LENGTH (type) == 16
|
|
&& (gdbarch_long_double_format (gdbarch)
|
|
== floatformats_ibm_long_double))
|
|
{
|
|
if (write_pass)
|
|
{
|
|
regcache_cooked_write (regcache,
|
|
(tdep->ppc_fp0_regnum
|
|
+ freg),
|
|
val);
|
|
if (freg <= 12)
|
|
regcache_cooked_write (regcache,
|
|
(tdep->ppc_fp0_regnum
|
|
+ freg + 1),
|
|
val + 8);
|
|
}
|
|
freg += 2;
|
|
}
|
|
}
|
|
}
|
|
/* Always consume parameter stack space. */
|
|
gparam = align_up (gparam + TYPE_LENGTH (type), tdep->wordsize);
|
|
}
|
|
}
|
|
|
|
if (!write_pass)
|
|
{
|
|
/* Save the true region sizes ready for the second pass. */
|
|
vparam_size = vparam;
|
|
/* Make certain that the general parameter save area is at
|
|
least the minimum 8 registers (or doublewords) in size. */
|
|
if (greg < 8)
|
|
gparam_size = 8 * tdep->wordsize;
|
|
else
|
|
gparam_size = gparam;
|
|
}
|
|
}
|
|
|
|
/* Update %sp. */
|
|
regcache_cooked_write_signed (regcache, gdbarch_sp_regnum (gdbarch), sp);
|
|
|
|
/* Write the backchain (it occupies WORDSIZED bytes). */
|
|
write_memory_signed_integer (sp, tdep->wordsize, byte_order, back_chain);
|
|
|
|
/* Point the inferior function call's return address at the dummy's
|
|
breakpoint. */
|
|
regcache_cooked_write_signed (regcache, tdep->ppc_lr_regnum, bp_addr);
|
|
|
|
/* Use the func_addr to find the descriptor, and use that to find
|
|
the TOC. */
|
|
{
|
|
CORE_ADDR desc_addr;
|
|
if (convert_code_addr_to_desc_addr (func_addr, &desc_addr))
|
|
{
|
|
/* The TOC is the second double word in the descriptor. */
|
|
CORE_ADDR toc =
|
|
read_memory_unsigned_integer (desc_addr + tdep->wordsize,
|
|
tdep->wordsize, byte_order);
|
|
regcache_cooked_write_unsigned (regcache,
|
|
tdep->ppc_gp0_regnum + 2, toc);
|
|
}
|
|
}
|
|
|
|
return sp;
|
|
}
|
|
|
|
|
|
/* The 64 bit ABI return value convention.
|
|
|
|
Return non-zero if the return-value is stored in a register, return
|
|
0 if the return-value is instead stored on the stack (a.k.a.,
|
|
struct return convention).
|
|
|
|
For a return-value stored in a register: when WRITEBUF is non-NULL,
|
|
copy the buffer to the corresponding register return-value location
|
|
location; when READBUF is non-NULL, fill the buffer from the
|
|
corresponding register return-value location. */
|
|
enum return_value_convention
|
|
ppc64_sysv_abi_return_value (struct gdbarch *gdbarch, struct type *func_type,
|
|
struct type *valtype, struct regcache *regcache,
|
|
gdb_byte *readbuf, const gdb_byte *writebuf)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
|
|
/* This function exists to support a calling convention that
|
|
requires floating-point registers. It shouldn't be used on
|
|
processors that lack them. */
|
|
gdb_assert (ppc_floating_point_unit_p (gdbarch));
|
|
|
|
/* Floats and doubles in F1. */
|
|
if (TYPE_CODE (valtype) == TYPE_CODE_FLT && TYPE_LENGTH (valtype) <= 8)
|
|
{
|
|
gdb_byte regval[MAX_REGISTER_SIZE];
|
|
struct type *regtype = register_type (gdbarch, tdep->ppc_fp0_regnum);
|
|
if (writebuf != NULL)
|
|
{
|
|
convert_typed_floating (writebuf, valtype, regval, regtype);
|
|
regcache_cooked_write (regcache, tdep->ppc_fp0_regnum + 1, regval);
|
|
}
|
|
if (readbuf != NULL)
|
|
{
|
|
regcache_cooked_read (regcache, tdep->ppc_fp0_regnum + 1, regval);
|
|
convert_typed_floating (regval, regtype, readbuf, valtype);
|
|
}
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
if (TYPE_CODE (valtype) == TYPE_CODE_DECFLOAT)
|
|
return get_decimal_float_return_value (gdbarch, valtype, regcache, readbuf,
|
|
writebuf);
|
|
/* Integers in r3. */
|
|
if ((TYPE_CODE (valtype) == TYPE_CODE_INT
|
|
|| TYPE_CODE (valtype) == TYPE_CODE_ENUM
|
|
|| TYPE_CODE (valtype) == TYPE_CODE_CHAR
|
|
|| TYPE_CODE (valtype) == TYPE_CODE_BOOL)
|
|
&& TYPE_LENGTH (valtype) <= 8)
|
|
{
|
|
if (writebuf != NULL)
|
|
{
|
|
/* Be careful to sign extend the value. */
|
|
regcache_cooked_write_unsigned (regcache, tdep->ppc_gp0_regnum + 3,
|
|
unpack_long (valtype, writebuf));
|
|
}
|
|
if (readbuf != NULL)
|
|
{
|
|
/* Extract the integer from r3. Since this is truncating the
|
|
value, there isn't a sign extension problem. */
|
|
ULONGEST regval;
|
|
regcache_cooked_read_unsigned (regcache, tdep->ppc_gp0_regnum + 3,
|
|
®val);
|
|
store_unsigned_integer (readbuf, TYPE_LENGTH (valtype), byte_order,
|
|
regval);
|
|
}
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
/* All pointers live in r3. */
|
|
if (TYPE_CODE (valtype) == TYPE_CODE_PTR
|
|
|| TYPE_CODE (valtype) == TYPE_CODE_REF)
|
|
{
|
|
/* All pointers live in r3. */
|
|
if (writebuf != NULL)
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 3, writebuf);
|
|
if (readbuf != NULL)
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 3, readbuf);
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
/* Array type has more than one use. */
|
|
if (TYPE_CODE (valtype) == TYPE_CODE_ARRAY)
|
|
{
|
|
/* Small character arrays are returned, right justified, in r3. */
|
|
if (TYPE_LENGTH (valtype) <= 8
|
|
&& TYPE_CODE (TYPE_TARGET_TYPE (valtype)) == TYPE_CODE_INT
|
|
&& TYPE_LENGTH (TYPE_TARGET_TYPE (valtype)) == 1)
|
|
{
|
|
int offset = (register_size (gdbarch, tdep->ppc_gp0_regnum + 3)
|
|
- TYPE_LENGTH (valtype));
|
|
if (writebuf != NULL)
|
|
regcache_cooked_write_part (regcache, tdep->ppc_gp0_regnum + 3,
|
|
offset, TYPE_LENGTH (valtype), writebuf);
|
|
if (readbuf != NULL)
|
|
regcache_cooked_read_part (regcache, tdep->ppc_gp0_regnum + 3,
|
|
offset, TYPE_LENGTH (valtype), readbuf);
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
/* A VMX vector is returned in v2. */
|
|
if (TYPE_CODE (valtype) == TYPE_CODE_ARRAY
|
|
&& TYPE_VECTOR (valtype) && tdep->ppc_vr0_regnum >= 0)
|
|
{
|
|
if (readbuf)
|
|
regcache_cooked_read (regcache, tdep->ppc_vr0_regnum + 2, readbuf);
|
|
if (writebuf)
|
|
regcache_cooked_write (regcache, tdep->ppc_vr0_regnum + 2, writebuf);
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
}
|
|
/* Big floating point values get stored in adjacent floating
|
|
point registers, starting with F1. */
|
|
if (TYPE_CODE (valtype) == TYPE_CODE_FLT
|
|
&& (TYPE_LENGTH (valtype) == 16 || TYPE_LENGTH (valtype) == 32))
|
|
{
|
|
if (writebuf || readbuf != NULL)
|
|
{
|
|
int i;
|
|
for (i = 0; i < TYPE_LENGTH (valtype) / 8; i++)
|
|
{
|
|
if (writebuf != NULL)
|
|
regcache_cooked_write (regcache, tdep->ppc_fp0_regnum + 1 + i,
|
|
(const bfd_byte *) writebuf + i * 8);
|
|
if (readbuf != NULL)
|
|
regcache_cooked_read (regcache, tdep->ppc_fp0_regnum + 1 + i,
|
|
(bfd_byte *) readbuf + i * 8);
|
|
}
|
|
}
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
/* Complex values get returned in f1:f2, need to convert. */
|
|
if (TYPE_CODE (valtype) == TYPE_CODE_COMPLEX
|
|
&& (TYPE_LENGTH (valtype) == 8 || TYPE_LENGTH (valtype) == 16))
|
|
{
|
|
if (regcache != NULL)
|
|
{
|
|
int i;
|
|
for (i = 0; i < 2; i++)
|
|
{
|
|
gdb_byte regval[MAX_REGISTER_SIZE];
|
|
struct type *regtype =
|
|
register_type (gdbarch, tdep->ppc_fp0_regnum);
|
|
if (writebuf != NULL)
|
|
{
|
|
convert_typed_floating ((const bfd_byte *) writebuf +
|
|
i * (TYPE_LENGTH (valtype) / 2),
|
|
valtype, regval, regtype);
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_fp0_regnum + 1 + i,
|
|
regval);
|
|
}
|
|
if (readbuf != NULL)
|
|
{
|
|
regcache_cooked_read (regcache,
|
|
tdep->ppc_fp0_regnum + 1 + i,
|
|
regval);
|
|
convert_typed_floating (regval, regtype,
|
|
(bfd_byte *) readbuf +
|
|
i * (TYPE_LENGTH (valtype) / 2),
|
|
valtype);
|
|
}
|
|
}
|
|
}
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
/* Big complex values get stored in f1:f4. */
|
|
if (TYPE_CODE (valtype) == TYPE_CODE_COMPLEX && TYPE_LENGTH (valtype) == 32)
|
|
{
|
|
if (regcache != NULL)
|
|
{
|
|
int i;
|
|
for (i = 0; i < 4; i++)
|
|
{
|
|
if (writebuf != NULL)
|
|
regcache_cooked_write (regcache, tdep->ppc_fp0_regnum + 1 + i,
|
|
(const bfd_byte *) writebuf + i * 8);
|
|
if (readbuf != NULL)
|
|
regcache_cooked_read (regcache, tdep->ppc_fp0_regnum + 1 + i,
|
|
(bfd_byte *) readbuf + i * 8);
|
|
}
|
|
}
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
return RETURN_VALUE_STRUCT_CONVENTION;
|
|
}
|
|
|