mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-05 16:24:02 +08:00
268a13a5a3
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2578 lines
101 KiB
C++
2578 lines
101 KiB
C++
/* Interface between GDB and target environments, including files and processes
|
||
|
||
Copyright (C) 1990-2019 Free Software Foundation, Inc.
|
||
|
||
Contributed by Cygnus Support. Written by John Gilmore.
|
||
|
||
This file is part of GDB.
|
||
|
||
This program is free software; you can redistribute it and/or modify
|
||
it under the terms of the GNU General Public License as published by
|
||
the Free Software Foundation; either version 3 of the License, or
|
||
(at your option) any later version.
|
||
|
||
This program is distributed in the hope that it will be useful,
|
||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
GNU General Public License for more details.
|
||
|
||
You should have received a copy of the GNU General Public License
|
||
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
||
|
||
#if !defined (TARGET_H)
|
||
#define TARGET_H
|
||
|
||
struct objfile;
|
||
struct ui_file;
|
||
struct mem_attrib;
|
||
struct target_ops;
|
||
struct bp_location;
|
||
struct bp_target_info;
|
||
struct regcache;
|
||
struct target_section_table;
|
||
struct trace_state_variable;
|
||
struct trace_status;
|
||
struct uploaded_tsv;
|
||
struct uploaded_tp;
|
||
struct static_tracepoint_marker;
|
||
struct traceframe_info;
|
||
struct expression;
|
||
struct dcache_struct;
|
||
struct inferior;
|
||
|
||
#include "infrun.h" /* For enum exec_direction_kind. */
|
||
#include "breakpoint.h" /* For enum bptype. */
|
||
#include "gdbsupport/scoped_restore.h"
|
||
|
||
/* This include file defines the interface between the main part
|
||
of the debugger, and the part which is target-specific, or
|
||
specific to the communications interface between us and the
|
||
target.
|
||
|
||
A TARGET is an interface between the debugger and a particular
|
||
kind of file or process. Targets can be STACKED in STRATA,
|
||
so that more than one target can potentially respond to a request.
|
||
In particular, memory accesses will walk down the stack of targets
|
||
until they find a target that is interested in handling that particular
|
||
address. STRATA are artificial boundaries on the stack, within
|
||
which particular kinds of targets live. Strata exist so that
|
||
people don't get confused by pushing e.g. a process target and then
|
||
a file target, and wondering why they can't see the current values
|
||
of variables any more (the file target is handling them and they
|
||
never get to the process target). So when you push a file target,
|
||
it goes into the file stratum, which is always below the process
|
||
stratum.
|
||
|
||
Note that rather than allow an empty stack, we always have the
|
||
dummy target at the bottom stratum, so we can call the target
|
||
methods without checking them. */
|
||
|
||
#include "target/target.h"
|
||
#include "target/resume.h"
|
||
#include "target/wait.h"
|
||
#include "target/waitstatus.h"
|
||
#include "bfd.h"
|
||
#include "symtab.h"
|
||
#include "memattr.h"
|
||
#include "gdbsupport/vec.h"
|
||
#include "gdbsupport/gdb_signals.h"
|
||
#include "btrace.h"
|
||
#include "record.h"
|
||
#include "command.h"
|
||
#include "disasm.h"
|
||
#include "tracepoint.h"
|
||
|
||
#include "gdbsupport/break-common.h" /* For enum target_hw_bp_type. */
|
||
|
||
enum strata
|
||
{
|
||
dummy_stratum, /* The lowest of the low */
|
||
file_stratum, /* Executable files, etc */
|
||
process_stratum, /* Executing processes or core dump files */
|
||
thread_stratum, /* Executing threads */
|
||
record_stratum, /* Support record debugging */
|
||
arch_stratum, /* Architecture overrides */
|
||
debug_stratum /* Target debug. Must be last. */
|
||
};
|
||
|
||
enum thread_control_capabilities
|
||
{
|
||
tc_none = 0, /* Default: can't control thread execution. */
|
||
tc_schedlock = 1, /* Can lock the thread scheduler. */
|
||
};
|
||
|
||
/* The structure below stores information about a system call.
|
||
It is basically used in the "catch syscall" command, and in
|
||
every function that gives information about a system call.
|
||
|
||
It's also good to mention that its fields represent everything
|
||
that we currently know about a syscall in GDB. */
|
||
struct syscall
|
||
{
|
||
/* The syscall number. */
|
||
int number;
|
||
|
||
/* The syscall name. */
|
||
const char *name;
|
||
};
|
||
|
||
/* Return a pretty printed form of TARGET_OPTIONS. */
|
||
extern std::string target_options_to_string (int target_options);
|
||
|
||
/* Possible types of events that the inferior handler will have to
|
||
deal with. */
|
||
enum inferior_event_type
|
||
{
|
||
/* Process a normal inferior event which will result in target_wait
|
||
being called. */
|
||
INF_REG_EVENT,
|
||
/* We are called to do stuff after the inferior stops. */
|
||
INF_EXEC_COMPLETE,
|
||
};
|
||
|
||
/* Target objects which can be transfered using target_read,
|
||
target_write, et cetera. */
|
||
|
||
enum target_object
|
||
{
|
||
/* AVR target specific transfer. See "avr-tdep.c" and "remote.c". */
|
||
TARGET_OBJECT_AVR,
|
||
/* SPU target specific transfer. See "spu-tdep.c". */
|
||
TARGET_OBJECT_SPU,
|
||
/* Transfer up-to LEN bytes of memory starting at OFFSET. */
|
||
TARGET_OBJECT_MEMORY,
|
||
/* Memory, avoiding GDB's data cache and trusting the executable.
|
||
Target implementations of to_xfer_partial never need to handle
|
||
this object, and most callers should not use it. */
|
||
TARGET_OBJECT_RAW_MEMORY,
|
||
/* Memory known to be part of the target's stack. This is cached even
|
||
if it is not in a region marked as such, since it is known to be
|
||
"normal" RAM. */
|
||
TARGET_OBJECT_STACK_MEMORY,
|
||
/* Memory known to be part of the target code. This is cached even
|
||
if it is not in a region marked as such. */
|
||
TARGET_OBJECT_CODE_MEMORY,
|
||
/* Kernel Unwind Table. See "ia64-tdep.c". */
|
||
TARGET_OBJECT_UNWIND_TABLE,
|
||
/* Transfer auxilliary vector. */
|
||
TARGET_OBJECT_AUXV,
|
||
/* StackGhost cookie. See "sparc-tdep.c". */
|
||
TARGET_OBJECT_WCOOKIE,
|
||
/* Target memory map in XML format. */
|
||
TARGET_OBJECT_MEMORY_MAP,
|
||
/* Flash memory. This object can be used to write contents to
|
||
a previously erased flash memory. Using it without erasing
|
||
flash can have unexpected results. Addresses are physical
|
||
address on target, and not relative to flash start. */
|
||
TARGET_OBJECT_FLASH,
|
||
/* Available target-specific features, e.g. registers and coprocessors.
|
||
See "target-descriptions.c". ANNEX should never be empty. */
|
||
TARGET_OBJECT_AVAILABLE_FEATURES,
|
||
/* Currently loaded libraries, in XML format. */
|
||
TARGET_OBJECT_LIBRARIES,
|
||
/* Currently loaded libraries specific for SVR4 systems, in XML format. */
|
||
TARGET_OBJECT_LIBRARIES_SVR4,
|
||
/* Currently loaded libraries specific to AIX systems, in XML format. */
|
||
TARGET_OBJECT_LIBRARIES_AIX,
|
||
/* Get OS specific data. The ANNEX specifies the type (running
|
||
processes, etc.). The data being transfered is expected to follow
|
||
the DTD specified in features/osdata.dtd. */
|
||
TARGET_OBJECT_OSDATA,
|
||
/* Extra signal info. Usually the contents of `siginfo_t' on unix
|
||
platforms. */
|
||
TARGET_OBJECT_SIGNAL_INFO,
|
||
/* The list of threads that are being debugged. */
|
||
TARGET_OBJECT_THREADS,
|
||
/* Collected static trace data. */
|
||
TARGET_OBJECT_STATIC_TRACE_DATA,
|
||
/* Traceframe info, in XML format. */
|
||
TARGET_OBJECT_TRACEFRAME_INFO,
|
||
/* Load maps for FDPIC systems. */
|
||
TARGET_OBJECT_FDPIC,
|
||
/* Darwin dynamic linker info data. */
|
||
TARGET_OBJECT_DARWIN_DYLD_INFO,
|
||
/* OpenVMS Unwind Information Block. */
|
||
TARGET_OBJECT_OPENVMS_UIB,
|
||
/* Branch trace data, in XML format. */
|
||
TARGET_OBJECT_BTRACE,
|
||
/* Branch trace configuration, in XML format. */
|
||
TARGET_OBJECT_BTRACE_CONF,
|
||
/* The pathname of the executable file that was run to create
|
||
a specified process. ANNEX should be a string representation
|
||
of the process ID of the process in question, in hexadecimal
|
||
format. */
|
||
TARGET_OBJECT_EXEC_FILE,
|
||
/* FreeBSD virtual memory mappings. */
|
||
TARGET_OBJECT_FREEBSD_VMMAP,
|
||
/* FreeBSD process strings. */
|
||
TARGET_OBJECT_FREEBSD_PS_STRINGS,
|
||
/* Possible future objects: TARGET_OBJECT_FILE, ... */
|
||
};
|
||
|
||
/* Possible values returned by target_xfer_partial, etc. */
|
||
|
||
enum target_xfer_status
|
||
{
|
||
/* Some bytes are transferred. */
|
||
TARGET_XFER_OK = 1,
|
||
|
||
/* No further transfer is possible. */
|
||
TARGET_XFER_EOF = 0,
|
||
|
||
/* The piece of the object requested is unavailable. */
|
||
TARGET_XFER_UNAVAILABLE = 2,
|
||
|
||
/* Generic I/O error. Note that it's important that this is '-1',
|
||
as we still have target_xfer-related code returning hardcoded
|
||
'-1' on error. */
|
||
TARGET_XFER_E_IO = -1,
|
||
|
||
/* Keep list in sync with target_xfer_status_to_string. */
|
||
};
|
||
|
||
/* Return the string form of STATUS. */
|
||
|
||
extern const char *
|
||
target_xfer_status_to_string (enum target_xfer_status status);
|
||
|
||
typedef enum target_xfer_status
|
||
target_xfer_partial_ftype (struct target_ops *ops,
|
||
enum target_object object,
|
||
const char *annex,
|
||
gdb_byte *readbuf,
|
||
const gdb_byte *writebuf,
|
||
ULONGEST offset,
|
||
ULONGEST len,
|
||
ULONGEST *xfered_len);
|
||
|
||
enum target_xfer_status
|
||
raw_memory_xfer_partial (struct target_ops *ops, gdb_byte *readbuf,
|
||
const gdb_byte *writebuf, ULONGEST memaddr,
|
||
LONGEST len, ULONGEST *xfered_len);
|
||
|
||
/* Request that OPS transfer up to LEN addressable units of the target's
|
||
OBJECT. When reading from a memory object, the size of an addressable unit
|
||
is architecture dependent and can be found using
|
||
gdbarch_addressable_memory_unit_size. Otherwise, an addressable unit is 1
|
||
byte long. BUF should point to a buffer large enough to hold the read data,
|
||
taking into account the addressable unit size. The OFFSET, for a seekable
|
||
object, specifies the starting point. The ANNEX can be used to provide
|
||
additional data-specific information to the target.
|
||
|
||
Return the number of addressable units actually transferred, or a negative
|
||
error code (an 'enum target_xfer_error' value) if the transfer is not
|
||
supported or otherwise fails. Return of a positive value less than
|
||
LEN indicates that no further transfer is possible. Unlike the raw
|
||
to_xfer_partial interface, callers of these functions do not need
|
||
to retry partial transfers. */
|
||
|
||
extern LONGEST target_read (struct target_ops *ops,
|
||
enum target_object object,
|
||
const char *annex, gdb_byte *buf,
|
||
ULONGEST offset, LONGEST len);
|
||
|
||
struct memory_read_result
|
||
{
|
||
memory_read_result (ULONGEST begin_, ULONGEST end_,
|
||
gdb::unique_xmalloc_ptr<gdb_byte> &&data_)
|
||
: begin (begin_),
|
||
end (end_),
|
||
data (std::move (data_))
|
||
{
|
||
}
|
||
|
||
~memory_read_result () = default;
|
||
|
||
memory_read_result (memory_read_result &&other) = default;
|
||
|
||
DISABLE_COPY_AND_ASSIGN (memory_read_result);
|
||
|
||
/* First address that was read. */
|
||
ULONGEST begin;
|
||
/* Past-the-end address. */
|
||
ULONGEST end;
|
||
/* The data. */
|
||
gdb::unique_xmalloc_ptr<gdb_byte> data;
|
||
};
|
||
|
||
extern std::vector<memory_read_result> read_memory_robust
|
||
(struct target_ops *ops, const ULONGEST offset, const LONGEST len);
|
||
|
||
/* Request that OPS transfer up to LEN addressable units from BUF to the
|
||
target's OBJECT. When writing to a memory object, the addressable unit
|
||
size is architecture dependent and can be found using
|
||
gdbarch_addressable_memory_unit_size. Otherwise, an addressable unit is 1
|
||
byte long. The OFFSET, for a seekable object, specifies the starting point.
|
||
The ANNEX can be used to provide additional data-specific information to
|
||
the target.
|
||
|
||
Return the number of addressable units actually transferred, or a negative
|
||
error code (an 'enum target_xfer_status' value) if the transfer is not
|
||
supported or otherwise fails. Return of a positive value less than
|
||
LEN indicates that no further transfer is possible. Unlike the raw
|
||
to_xfer_partial interface, callers of these functions do not need to
|
||
retry partial transfers. */
|
||
|
||
extern LONGEST target_write (struct target_ops *ops,
|
||
enum target_object object,
|
||
const char *annex, const gdb_byte *buf,
|
||
ULONGEST offset, LONGEST len);
|
||
|
||
/* Similar to target_write, except that it also calls PROGRESS with
|
||
the number of bytes written and the opaque BATON after every
|
||
successful partial write (and before the first write). This is
|
||
useful for progress reporting and user interaction while writing
|
||
data. To abort the transfer, the progress callback can throw an
|
||
exception. */
|
||
|
||
LONGEST target_write_with_progress (struct target_ops *ops,
|
||
enum target_object object,
|
||
const char *annex, const gdb_byte *buf,
|
||
ULONGEST offset, LONGEST len,
|
||
void (*progress) (ULONGEST, void *),
|
||
void *baton);
|
||
|
||
/* Wrapper to perform a full read of unknown size. OBJECT/ANNEX will be read
|
||
using OPS. The return value will be uninstantiated if the transfer fails or
|
||
is not supported.
|
||
|
||
This method should be used for objects sufficiently small to store
|
||
in a single xmalloc'd buffer, when no fixed bound on the object's
|
||
size is known in advance. Don't try to read TARGET_OBJECT_MEMORY
|
||
through this function. */
|
||
|
||
extern gdb::optional<gdb::byte_vector> target_read_alloc
|
||
(struct target_ops *ops, enum target_object object, const char *annex);
|
||
|
||
/* Read OBJECT/ANNEX using OPS. The result is a NUL-terminated character vector
|
||
(therefore usable as a NUL-terminated string). If an error occurs or the
|
||
transfer is unsupported, the return value will be uninstantiated. Empty
|
||
objects are returned as allocated but empty strings. Therefore, on success,
|
||
the returned vector is guaranteed to have at least one element. A warning is
|
||
issued if the result contains any embedded NUL bytes. */
|
||
|
||
extern gdb::optional<gdb::char_vector> target_read_stralloc
|
||
(struct target_ops *ops, enum target_object object, const char *annex);
|
||
|
||
/* See target_ops->to_xfer_partial. */
|
||
extern target_xfer_partial_ftype target_xfer_partial;
|
||
|
||
/* Wrappers to target read/write that perform memory transfers. They
|
||
throw an error if the memory transfer fails.
|
||
|
||
NOTE: cagney/2003-10-23: The naming schema is lifted from
|
||
"frame.h". The parameter order is lifted from get_frame_memory,
|
||
which in turn lifted it from read_memory. */
|
||
|
||
extern void get_target_memory (struct target_ops *ops, CORE_ADDR addr,
|
||
gdb_byte *buf, LONGEST len);
|
||
extern ULONGEST get_target_memory_unsigned (struct target_ops *ops,
|
||
CORE_ADDR addr, int len,
|
||
enum bfd_endian byte_order);
|
||
|
||
struct thread_info; /* fwd decl for parameter list below: */
|
||
|
||
/* The type of the callback to the to_async method. */
|
||
|
||
typedef void async_callback_ftype (enum inferior_event_type event_type,
|
||
void *context);
|
||
|
||
/* Normally target debug printing is purely type-based. However,
|
||
sometimes it is necessary to override the debug printing on a
|
||
per-argument basis. This macro can be used, attribute-style, to
|
||
name the target debug printing function for a particular method
|
||
argument. FUNC is the name of the function. The macro's
|
||
definition is empty because it is only used by the
|
||
make-target-delegates script. */
|
||
|
||
#define TARGET_DEBUG_PRINTER(FUNC)
|
||
|
||
/* These defines are used to mark target_ops methods. The script
|
||
make-target-delegates scans these and auto-generates the base
|
||
method implementations. There are four macros that can be used:
|
||
|
||
1. TARGET_DEFAULT_IGNORE. There is no argument. The base method
|
||
does nothing. This is only valid if the method return type is
|
||
'void'.
|
||
|
||
2. TARGET_DEFAULT_NORETURN. The argument is a function call, like
|
||
'tcomplain ()'. The base method simply makes this call, which is
|
||
assumed not to return.
|
||
|
||
3. TARGET_DEFAULT_RETURN. The argument is a C expression. The
|
||
base method returns this expression's value.
|
||
|
||
4. TARGET_DEFAULT_FUNC. The argument is the name of a function.
|
||
make-target-delegates does not generate a base method in this case,
|
||
but instead uses the argument function as the base method. */
|
||
|
||
#define TARGET_DEFAULT_IGNORE()
|
||
#define TARGET_DEFAULT_NORETURN(ARG)
|
||
#define TARGET_DEFAULT_RETURN(ARG)
|
||
#define TARGET_DEFAULT_FUNC(ARG)
|
||
|
||
/* Each target that can be activated with "target TARGET_NAME" passes
|
||
the address of one of these objects to add_target, which uses the
|
||
object's address as unique identifier, and registers the "target
|
||
TARGET_NAME" command using SHORTNAME as target name. */
|
||
|
||
struct target_info
|
||
{
|
||
/* Name of this target. */
|
||
const char *shortname;
|
||
|
||
/* Name for printing. */
|
||
const char *longname;
|
||
|
||
/* Documentation. Does not include trailing newline, and starts
|
||
with a one-line description (probably similar to longname). */
|
||
const char *doc;
|
||
};
|
||
|
||
struct target_ops
|
||
{
|
||
/* Return this target's stratum. */
|
||
virtual strata stratum () const = 0;
|
||
|
||
/* To the target under this one. */
|
||
target_ops *beneath () const;
|
||
|
||
/* Free resources associated with the target. Note that singleton
|
||
targets, like e.g., native targets, are global objects, not
|
||
heap allocated, and are thus only deleted on GDB exit. The
|
||
main teardown entry point is the "close" method, below. */
|
||
virtual ~target_ops () {}
|
||
|
||
/* Return a reference to this target's unique target_info
|
||
object. */
|
||
virtual const target_info &info () const = 0;
|
||
|
||
/* Name this target type. */
|
||
const char *shortname ()
|
||
{ return info ().shortname; }
|
||
|
||
const char *longname ()
|
||
{ return info ().longname; }
|
||
|
||
/* Close the target. This is where the target can handle
|
||
teardown. Heap-allocated targets should delete themselves
|
||
before returning. */
|
||
virtual void close ();
|
||
|
||
/* Attaches to a process on the target side. Arguments are as
|
||
passed to the `attach' command by the user. This routine can
|
||
be called when the target is not on the target-stack, if the
|
||
target_ops::can_run method returns 1; in that case, it must push
|
||
itself onto the stack. Upon exit, the target should be ready
|
||
for normal operations, and should be ready to deliver the
|
||
status of the process immediately (without waiting) to an
|
||
upcoming target_wait call. */
|
||
virtual bool can_attach ();
|
||
virtual void attach (const char *, int);
|
||
virtual void post_attach (int)
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual void detach (inferior *, int)
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual void disconnect (const char *, int)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
virtual void resume (ptid_t,
|
||
int TARGET_DEBUG_PRINTER (target_debug_print_step),
|
||
enum gdb_signal)
|
||
TARGET_DEFAULT_NORETURN (noprocess ());
|
||
virtual void commit_resume ()
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual ptid_t wait (ptid_t, struct target_waitstatus *,
|
||
int TARGET_DEBUG_PRINTER (target_debug_print_options))
|
||
TARGET_DEFAULT_FUNC (default_target_wait);
|
||
virtual void fetch_registers (struct regcache *, int)
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual void store_registers (struct regcache *, int)
|
||
TARGET_DEFAULT_NORETURN (noprocess ());
|
||
virtual void prepare_to_store (struct regcache *)
|
||
TARGET_DEFAULT_NORETURN (noprocess ());
|
||
|
||
virtual void files_info ()
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual int insert_breakpoint (struct gdbarch *,
|
||
struct bp_target_info *)
|
||
TARGET_DEFAULT_NORETURN (noprocess ());
|
||
virtual int remove_breakpoint (struct gdbarch *,
|
||
struct bp_target_info *,
|
||
enum remove_bp_reason)
|
||
TARGET_DEFAULT_NORETURN (noprocess ());
|
||
|
||
/* Returns true if the target stopped because it executed a
|
||
software breakpoint. This is necessary for correct background
|
||
execution / non-stop mode operation, and for correct PC
|
||
adjustment on targets where the PC needs to be adjusted when a
|
||
software breakpoint triggers. In these modes, by the time GDB
|
||
processes a breakpoint event, the breakpoint may already be
|
||
done from the target, so GDB needs to be able to tell whether
|
||
it should ignore the event and whether it should adjust the PC.
|
||
See adjust_pc_after_break. */
|
||
virtual bool stopped_by_sw_breakpoint ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
/* Returns true if the above method is supported. */
|
||
virtual bool supports_stopped_by_sw_breakpoint ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
/* Returns true if the target stopped for a hardware breakpoint.
|
||
Likewise, if the target supports hardware breakpoints, this
|
||
method is necessary for correct background execution / non-stop
|
||
mode operation. Even though hardware breakpoints do not
|
||
require PC adjustment, GDB needs to be able to tell whether the
|
||
hardware breakpoint event is a delayed event for a breakpoint
|
||
that is already gone and should thus be ignored. */
|
||
virtual bool stopped_by_hw_breakpoint ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
/* Returns true if the above method is supported. */
|
||
virtual bool supports_stopped_by_hw_breakpoint ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
virtual int can_use_hw_breakpoint (enum bptype, int, int)
|
||
TARGET_DEFAULT_RETURN (0);
|
||
virtual int ranged_break_num_registers ()
|
||
TARGET_DEFAULT_RETURN (-1);
|
||
virtual int insert_hw_breakpoint (struct gdbarch *,
|
||
struct bp_target_info *)
|
||
TARGET_DEFAULT_RETURN (-1);
|
||
virtual int remove_hw_breakpoint (struct gdbarch *,
|
||
struct bp_target_info *)
|
||
TARGET_DEFAULT_RETURN (-1);
|
||
|
||
/* Documentation of what the two routines below are expected to do is
|
||
provided with the corresponding target_* macros. */
|
||
virtual int remove_watchpoint (CORE_ADDR, int,
|
||
enum target_hw_bp_type, struct expression *)
|
||
TARGET_DEFAULT_RETURN (-1);
|
||
virtual int insert_watchpoint (CORE_ADDR, int,
|
||
enum target_hw_bp_type, struct expression *)
|
||
TARGET_DEFAULT_RETURN (-1);
|
||
|
||
virtual int insert_mask_watchpoint (CORE_ADDR, CORE_ADDR,
|
||
enum target_hw_bp_type)
|
||
TARGET_DEFAULT_RETURN (1);
|
||
virtual int remove_mask_watchpoint (CORE_ADDR, CORE_ADDR,
|
||
enum target_hw_bp_type)
|
||
TARGET_DEFAULT_RETURN (1);
|
||
virtual bool stopped_by_watchpoint ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
virtual bool have_steppable_watchpoint ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
virtual bool stopped_data_address (CORE_ADDR *)
|
||
TARGET_DEFAULT_RETURN (false);
|
||
virtual bool watchpoint_addr_within_range (CORE_ADDR, CORE_ADDR, int)
|
||
TARGET_DEFAULT_FUNC (default_watchpoint_addr_within_range);
|
||
|
||
/* Documentation of this routine is provided with the corresponding
|
||
target_* macro. */
|
||
virtual int region_ok_for_hw_watchpoint (CORE_ADDR, int)
|
||
TARGET_DEFAULT_FUNC (default_region_ok_for_hw_watchpoint);
|
||
|
||
virtual bool can_accel_watchpoint_condition (CORE_ADDR, int, int,
|
||
struct expression *)
|
||
TARGET_DEFAULT_RETURN (false);
|
||
virtual int masked_watch_num_registers (CORE_ADDR, CORE_ADDR)
|
||
TARGET_DEFAULT_RETURN (-1);
|
||
|
||
/* Return 1 for sure target can do single step. Return -1 for
|
||
unknown. Return 0 for target can't do. */
|
||
virtual int can_do_single_step ()
|
||
TARGET_DEFAULT_RETURN (-1);
|
||
|
||
virtual bool supports_terminal_ours ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
virtual void terminal_init ()
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual void terminal_inferior ()
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual void terminal_save_inferior ()
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual void terminal_ours_for_output ()
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual void terminal_ours ()
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual void terminal_info (const char *, int)
|
||
TARGET_DEFAULT_FUNC (default_terminal_info);
|
||
virtual void kill ()
|
||
TARGET_DEFAULT_NORETURN (noprocess ());
|
||
virtual void load (const char *, int)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
/* Start an inferior process and set inferior_ptid to its pid.
|
||
EXEC_FILE is the file to run.
|
||
ALLARGS is a string containing the arguments to the program.
|
||
ENV is the environment vector to pass. Errors reported with error().
|
||
On VxWorks and various standalone systems, we ignore exec_file. */
|
||
virtual bool can_create_inferior ();
|
||
virtual void create_inferior (const char *, const std::string &,
|
||
char **, int);
|
||
virtual void post_startup_inferior (ptid_t)
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual int insert_fork_catchpoint (int)
|
||
TARGET_DEFAULT_RETURN (1);
|
||
virtual int remove_fork_catchpoint (int)
|
||
TARGET_DEFAULT_RETURN (1);
|
||
virtual int insert_vfork_catchpoint (int)
|
||
TARGET_DEFAULT_RETURN (1);
|
||
virtual int remove_vfork_catchpoint (int)
|
||
TARGET_DEFAULT_RETURN (1);
|
||
virtual int follow_fork (int, int)
|
||
TARGET_DEFAULT_FUNC (default_follow_fork);
|
||
virtual int insert_exec_catchpoint (int)
|
||
TARGET_DEFAULT_RETURN (1);
|
||
virtual int remove_exec_catchpoint (int)
|
||
TARGET_DEFAULT_RETURN (1);
|
||
virtual void follow_exec (struct inferior *, const char *)
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual int set_syscall_catchpoint (int, bool, int,
|
||
gdb::array_view<const int>)
|
||
TARGET_DEFAULT_RETURN (1);
|
||
virtual void mourn_inferior ()
|
||
TARGET_DEFAULT_FUNC (default_mourn_inferior);
|
||
|
||
/* Note that can_run is special and can be invoked on an unpushed
|
||
target. Targets defining this method must also define
|
||
to_can_async_p and to_supports_non_stop. */
|
||
virtual bool can_run ();
|
||
|
||
/* Documentation of this routine is provided with the corresponding
|
||
target_* macro. */
|
||
virtual void pass_signals (gdb::array_view<const unsigned char> TARGET_DEBUG_PRINTER (target_debug_print_signals))
|
||
TARGET_DEFAULT_IGNORE ();
|
||
|
||
/* Documentation of this routine is provided with the
|
||
corresponding target_* function. */
|
||
virtual void program_signals (gdb::array_view<const unsigned char> TARGET_DEBUG_PRINTER (target_debug_print_signals))
|
||
TARGET_DEFAULT_IGNORE ();
|
||
|
||
virtual bool thread_alive (ptid_t ptid)
|
||
TARGET_DEFAULT_RETURN (false);
|
||
virtual void update_thread_list ()
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual std::string pid_to_str (ptid_t)
|
||
TARGET_DEFAULT_FUNC (default_pid_to_str);
|
||
virtual const char *extra_thread_info (thread_info *)
|
||
TARGET_DEFAULT_RETURN (NULL);
|
||
virtual const char *thread_name (thread_info *)
|
||
TARGET_DEFAULT_RETURN (NULL);
|
||
virtual thread_info *thread_handle_to_thread_info (const gdb_byte *,
|
||
int,
|
||
inferior *inf)
|
||
TARGET_DEFAULT_RETURN (NULL);
|
||
/* See target_thread_info_to_thread_handle. */
|
||
virtual gdb::byte_vector thread_info_to_thread_handle (struct thread_info *)
|
||
TARGET_DEFAULT_RETURN (gdb::byte_vector ());
|
||
virtual void stop (ptid_t)
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual void interrupt ()
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual void pass_ctrlc ()
|
||
TARGET_DEFAULT_FUNC (default_target_pass_ctrlc);
|
||
virtual void rcmd (const char *command, struct ui_file *output)
|
||
TARGET_DEFAULT_FUNC (default_rcmd);
|
||
virtual char *pid_to_exec_file (int pid)
|
||
TARGET_DEFAULT_RETURN (NULL);
|
||
virtual void log_command (const char *)
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual struct target_section_table *get_section_table ()
|
||
TARGET_DEFAULT_RETURN (NULL);
|
||
|
||
/* Provide default values for all "must have" methods. */
|
||
virtual bool has_all_memory () { return false; }
|
||
virtual bool has_memory () { return false; }
|
||
virtual bool has_stack () { return false; }
|
||
virtual bool has_registers () { return false; }
|
||
virtual bool has_execution (ptid_t) { return false; }
|
||
|
||
/* Control thread execution. */
|
||
virtual thread_control_capabilities get_thread_control_capabilities ()
|
||
TARGET_DEFAULT_RETURN (tc_none);
|
||
virtual bool attach_no_wait ()
|
||
TARGET_DEFAULT_RETURN (0);
|
||
/* This method must be implemented in some situations. See the
|
||
comment on 'can_run'. */
|
||
virtual bool can_async_p ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
virtual bool is_async_p ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
virtual void async (int)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
virtual void thread_events (int)
|
||
TARGET_DEFAULT_IGNORE ();
|
||
/* This method must be implemented in some situations. See the
|
||
comment on 'can_run'. */
|
||
virtual bool supports_non_stop ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
/* Return true if the target operates in non-stop mode even with
|
||
"set non-stop off". */
|
||
virtual bool always_non_stop_p ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
/* find_memory_regions support method for gcore */
|
||
virtual int find_memory_regions (find_memory_region_ftype func, void *data)
|
||
TARGET_DEFAULT_FUNC (dummy_find_memory_regions);
|
||
/* make_corefile_notes support method for gcore */
|
||
virtual char *make_corefile_notes (bfd *, int *)
|
||
TARGET_DEFAULT_FUNC (dummy_make_corefile_notes);
|
||
/* get_bookmark support method for bookmarks */
|
||
virtual gdb_byte *get_bookmark (const char *, int)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
/* goto_bookmark support method for bookmarks */
|
||
virtual void goto_bookmark (const gdb_byte *, int)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
/* Return the thread-local address at OFFSET in the
|
||
thread-local storage for the thread PTID and the shared library
|
||
or executable file given by LOAD_MODULE_ADDR. If that block of
|
||
thread-local storage hasn't been allocated yet, this function
|
||
may throw an error. LOAD_MODULE_ADDR may be zero for statically
|
||
linked multithreaded inferiors. */
|
||
virtual CORE_ADDR get_thread_local_address (ptid_t ptid,
|
||
CORE_ADDR load_module_addr,
|
||
CORE_ADDR offset)
|
||
TARGET_DEFAULT_NORETURN (generic_tls_error ());
|
||
|
||
/* Request that OPS transfer up to LEN addressable units of the target's
|
||
OBJECT. When reading from a memory object, the size of an addressable
|
||
unit is architecture dependent and can be found using
|
||
gdbarch_addressable_memory_unit_size. Otherwise, an addressable unit is
|
||
1 byte long. The OFFSET, for a seekable object, specifies the
|
||
starting point. The ANNEX can be used to provide additional
|
||
data-specific information to the target.
|
||
|
||
Return the transferred status, error or OK (an
|
||
'enum target_xfer_status' value). Save the number of addressable units
|
||
actually transferred in *XFERED_LEN if transfer is successful
|
||
(TARGET_XFER_OK) or the number unavailable units if the requested
|
||
data is unavailable (TARGET_XFER_UNAVAILABLE). *XFERED_LEN
|
||
smaller than LEN does not indicate the end of the object, only
|
||
the end of the transfer; higher level code should continue
|
||
transferring if desired. This is handled in target.c.
|
||
|
||
The interface does not support a "retry" mechanism. Instead it
|
||
assumes that at least one addressable unit will be transfered on each
|
||
successful call.
|
||
|
||
NOTE: cagney/2003-10-17: The current interface can lead to
|
||
fragmented transfers. Lower target levels should not implement
|
||
hacks, such as enlarging the transfer, in an attempt to
|
||
compensate for this. Instead, the target stack should be
|
||
extended so that it implements supply/collect methods and a
|
||
look-aside object cache. With that available, the lowest
|
||
target can safely and freely "push" data up the stack.
|
||
|
||
See target_read and target_write for more information. One,
|
||
and only one, of readbuf or writebuf must be non-NULL. */
|
||
|
||
virtual enum target_xfer_status xfer_partial (enum target_object object,
|
||
const char *annex,
|
||
gdb_byte *readbuf,
|
||
const gdb_byte *writebuf,
|
||
ULONGEST offset, ULONGEST len,
|
||
ULONGEST *xfered_len)
|
||
TARGET_DEFAULT_RETURN (TARGET_XFER_E_IO);
|
||
|
||
/* Return the limit on the size of any single memory transfer
|
||
for the target. */
|
||
|
||
virtual ULONGEST get_memory_xfer_limit ()
|
||
TARGET_DEFAULT_RETURN (ULONGEST_MAX);
|
||
|
||
/* Returns the memory map for the target. A return value of NULL
|
||
means that no memory map is available. If a memory address
|
||
does not fall within any returned regions, it's assumed to be
|
||
RAM. The returned memory regions should not overlap.
|
||
|
||
The order of regions does not matter; target_memory_map will
|
||
sort regions by starting address. For that reason, this
|
||
function should not be called directly except via
|
||
target_memory_map.
|
||
|
||
This method should not cache data; if the memory map could
|
||
change unexpectedly, it should be invalidated, and higher
|
||
layers will re-fetch it. */
|
||
virtual std::vector<mem_region> memory_map ()
|
||
TARGET_DEFAULT_RETURN (std::vector<mem_region> ());
|
||
|
||
/* Erases the region of flash memory starting at ADDRESS, of
|
||
length LENGTH.
|
||
|
||
Precondition: both ADDRESS and ADDRESS+LENGTH should be aligned
|
||
on flash block boundaries, as reported by 'to_memory_map'. */
|
||
virtual void flash_erase (ULONGEST address, LONGEST length)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Finishes a flash memory write sequence. After this operation
|
||
all flash memory should be available for writing and the result
|
||
of reading from areas written by 'to_flash_write' should be
|
||
equal to what was written. */
|
||
virtual void flash_done ()
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Describe the architecture-specific features of this target. If
|
||
OPS doesn't have a description, this should delegate to the
|
||
"beneath" target. Returns the description found, or NULL if no
|
||
description was available. */
|
||
virtual const struct target_desc *read_description ()
|
||
TARGET_DEFAULT_RETURN (NULL);
|
||
|
||
/* Build the PTID of the thread on which a given task is running,
|
||
based on LWP and THREAD. These values are extracted from the
|
||
task Private_Data section of the Ada Task Control Block, and
|
||
their interpretation depends on the target. */
|
||
virtual ptid_t get_ada_task_ptid (long lwp, long thread)
|
||
TARGET_DEFAULT_FUNC (default_get_ada_task_ptid);
|
||
|
||
/* Read one auxv entry from *READPTR, not reading locations >= ENDPTR.
|
||
Return 0 if *READPTR is already at the end of the buffer.
|
||
Return -1 if there is insufficient buffer for a whole entry.
|
||
Return 1 if an entry was read into *TYPEP and *VALP. */
|
||
virtual int auxv_parse (gdb_byte **readptr,
|
||
gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp)
|
||
TARGET_DEFAULT_FUNC (default_auxv_parse);
|
||
|
||
/* Search SEARCH_SPACE_LEN bytes beginning at START_ADDR for the
|
||
sequence of bytes in PATTERN with length PATTERN_LEN.
|
||
|
||
The result is 1 if found, 0 if not found, and -1 if there was an error
|
||
requiring halting of the search (e.g. memory read error).
|
||
If the pattern is found the address is recorded in FOUND_ADDRP. */
|
||
virtual int search_memory (CORE_ADDR start_addr, ULONGEST search_space_len,
|
||
const gdb_byte *pattern, ULONGEST pattern_len,
|
||
CORE_ADDR *found_addrp)
|
||
TARGET_DEFAULT_FUNC (default_search_memory);
|
||
|
||
/* Can target execute in reverse? */
|
||
virtual bool can_execute_reverse ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
/* The direction the target is currently executing. Must be
|
||
implemented on targets that support reverse execution and async
|
||
mode. The default simply returns forward execution. */
|
||
virtual enum exec_direction_kind execution_direction ()
|
||
TARGET_DEFAULT_FUNC (default_execution_direction);
|
||
|
||
/* Does this target support debugging multiple processes
|
||
simultaneously? */
|
||
virtual bool supports_multi_process ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
/* Does this target support enabling and disabling tracepoints while a trace
|
||
experiment is running? */
|
||
virtual bool supports_enable_disable_tracepoint ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
/* Does this target support disabling address space randomization? */
|
||
virtual bool supports_disable_randomization ()
|
||
TARGET_DEFAULT_FUNC (find_default_supports_disable_randomization);
|
||
|
||
/* Does this target support the tracenz bytecode for string collection? */
|
||
virtual bool supports_string_tracing ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
/* Does this target support evaluation of breakpoint conditions on its
|
||
end? */
|
||
virtual bool supports_evaluation_of_breakpoint_conditions ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
/* Does this target support evaluation of breakpoint commands on its
|
||
end? */
|
||
virtual bool can_run_breakpoint_commands ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
/* Determine current architecture of thread PTID.
|
||
|
||
The target is supposed to determine the architecture of the code where
|
||
the target is currently stopped at (on Cell, if a target is in spu_run,
|
||
to_thread_architecture would return SPU, otherwise PPC32 or PPC64).
|
||
This is architecture used to perform decr_pc_after_break adjustment,
|
||
and also determines the frame architecture of the innermost frame.
|
||
ptrace operations need to operate according to target_gdbarch (). */
|
||
virtual struct gdbarch *thread_architecture (ptid_t)
|
||
TARGET_DEFAULT_RETURN (NULL);
|
||
|
||
/* Determine current address space of thread PTID. */
|
||
virtual struct address_space *thread_address_space (ptid_t)
|
||
TARGET_DEFAULT_RETURN (NULL);
|
||
|
||
/* Target file operations. */
|
||
|
||
/* Return nonzero if the filesystem seen by the current inferior
|
||
is the local filesystem, zero otherwise. */
|
||
virtual bool filesystem_is_local ()
|
||
TARGET_DEFAULT_RETURN (true);
|
||
|
||
/* Open FILENAME on the target, in the filesystem as seen by INF,
|
||
using FLAGS and MODE. If INF is NULL, use the filesystem seen
|
||
by the debugger (GDB or, for remote targets, the remote stub).
|
||
If WARN_IF_SLOW is nonzero, print a warning message if the file
|
||
is being accessed over a link that may be slow. Return a
|
||
target file descriptor, or -1 if an error occurs (and set
|
||
*TARGET_ERRNO). */
|
||
virtual int fileio_open (struct inferior *inf, const char *filename,
|
||
int flags, int mode, int warn_if_slow,
|
||
int *target_errno);
|
||
|
||
/* Write up to LEN bytes from WRITE_BUF to FD on the target.
|
||
Return the number of bytes written, or -1 if an error occurs
|
||
(and set *TARGET_ERRNO). */
|
||
virtual int fileio_pwrite (int fd, const gdb_byte *write_buf, int len,
|
||
ULONGEST offset, int *target_errno);
|
||
|
||
/* Read up to LEN bytes FD on the target into READ_BUF.
|
||
Return the number of bytes read, or -1 if an error occurs
|
||
(and set *TARGET_ERRNO). */
|
||
virtual int fileio_pread (int fd, gdb_byte *read_buf, int len,
|
||
ULONGEST offset, int *target_errno);
|
||
|
||
/* Get information about the file opened as FD and put it in
|
||
SB. Return 0 on success, or -1 if an error occurs (and set
|
||
*TARGET_ERRNO). */
|
||
virtual int fileio_fstat (int fd, struct stat *sb, int *target_errno);
|
||
|
||
/* Close FD on the target. Return 0, or -1 if an error occurs
|
||
(and set *TARGET_ERRNO). */
|
||
virtual int fileio_close (int fd, int *target_errno);
|
||
|
||
/* Unlink FILENAME on the target, in the filesystem as seen by
|
||
INF. If INF is NULL, use the filesystem seen by the debugger
|
||
(GDB or, for remote targets, the remote stub). Return 0, or
|
||
-1 if an error occurs (and set *TARGET_ERRNO). */
|
||
virtual int fileio_unlink (struct inferior *inf,
|
||
const char *filename,
|
||
int *target_errno);
|
||
|
||
/* Read value of symbolic link FILENAME on the target, in the
|
||
filesystem as seen by INF. If INF is NULL, use the filesystem
|
||
seen by the debugger (GDB or, for remote targets, the remote
|
||
stub). Return a string, or an empty optional if an error
|
||
occurs (and set *TARGET_ERRNO). */
|
||
virtual gdb::optional<std::string> fileio_readlink (struct inferior *inf,
|
||
const char *filename,
|
||
int *target_errno);
|
||
|
||
/* Implement the "info proc" command. Returns true if the target
|
||
actually implemented the command, false otherwise. */
|
||
virtual bool info_proc (const char *, enum info_proc_what);
|
||
|
||
/* Tracepoint-related operations. */
|
||
|
||
/* Prepare the target for a tracing run. */
|
||
virtual void trace_init ()
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Send full details of a tracepoint location to the target. */
|
||
virtual void download_tracepoint (struct bp_location *location)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Is the target able to download tracepoint locations in current
|
||
state? */
|
||
virtual bool can_download_tracepoint ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
/* Send full details of a trace state variable to the target. */
|
||
virtual void download_trace_state_variable (const trace_state_variable &tsv)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Enable a tracepoint on the target. */
|
||
virtual void enable_tracepoint (struct bp_location *location)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Disable a tracepoint on the target. */
|
||
virtual void disable_tracepoint (struct bp_location *location)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Inform the target info of memory regions that are readonly
|
||
(such as text sections), and so it should return data from
|
||
those rather than look in the trace buffer. */
|
||
virtual void trace_set_readonly_regions ()
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Start a trace run. */
|
||
virtual void trace_start ()
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Get the current status of a tracing run. */
|
||
virtual int get_trace_status (struct trace_status *ts)
|
||
TARGET_DEFAULT_RETURN (-1);
|
||
|
||
virtual void get_tracepoint_status (struct breakpoint *tp,
|
||
struct uploaded_tp *utp)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Stop a trace run. */
|
||
virtual void trace_stop ()
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Ask the target to find a trace frame of the given type TYPE,
|
||
using NUM, ADDR1, and ADDR2 as search parameters. Returns the
|
||
number of the trace frame, and also the tracepoint number at
|
||
TPP. If no trace frame matches, return -1. May throw if the
|
||
operation fails. */
|
||
virtual int trace_find (enum trace_find_type type, int num,
|
||
CORE_ADDR addr1, CORE_ADDR addr2, int *tpp)
|
||
TARGET_DEFAULT_RETURN (-1);
|
||
|
||
/* Get the value of the trace state variable number TSV, returning
|
||
1 if the value is known and writing the value itself into the
|
||
location pointed to by VAL, else returning 0. */
|
||
virtual bool get_trace_state_variable_value (int tsv, LONGEST *val)
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
virtual int save_trace_data (const char *filename)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
virtual int upload_tracepoints (struct uploaded_tp **utpp)
|
||
TARGET_DEFAULT_RETURN (0);
|
||
|
||
virtual int upload_trace_state_variables (struct uploaded_tsv **utsvp)
|
||
TARGET_DEFAULT_RETURN (0);
|
||
|
||
virtual LONGEST get_raw_trace_data (gdb_byte *buf,
|
||
ULONGEST offset, LONGEST len)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Get the minimum length of instruction on which a fast tracepoint
|
||
may be set on the target. If this operation is unsupported,
|
||
return -1. If for some reason the minimum length cannot be
|
||
determined, return 0. */
|
||
virtual int get_min_fast_tracepoint_insn_len ()
|
||
TARGET_DEFAULT_RETURN (-1);
|
||
|
||
/* Set the target's tracing behavior in response to unexpected
|
||
disconnection - set VAL to 1 to keep tracing, 0 to stop. */
|
||
virtual void set_disconnected_tracing (int val)
|
||
TARGET_DEFAULT_IGNORE ();
|
||
virtual void set_circular_trace_buffer (int val)
|
||
TARGET_DEFAULT_IGNORE ();
|
||
/* Set the size of trace buffer in the target. */
|
||
virtual void set_trace_buffer_size (LONGEST val)
|
||
TARGET_DEFAULT_IGNORE ();
|
||
|
||
/* Add/change textual notes about the trace run, returning 1 if
|
||
successful, 0 otherwise. */
|
||
virtual bool set_trace_notes (const char *user, const char *notes,
|
||
const char *stopnotes)
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
/* Return the processor core that thread PTID was last seen on.
|
||
This information is updated only when:
|
||
- update_thread_list is called
|
||
- thread stops
|
||
If the core cannot be determined -- either for the specified
|
||
thread, or right now, or in this debug session, or for this
|
||
target -- return -1. */
|
||
virtual int core_of_thread (ptid_t ptid)
|
||
TARGET_DEFAULT_RETURN (-1);
|
||
|
||
/* Verify that the memory in the [MEMADDR, MEMADDR+SIZE) range
|
||
matches the contents of [DATA,DATA+SIZE). Returns 1 if there's
|
||
a match, 0 if there's a mismatch, and -1 if an error is
|
||
encountered while reading memory. */
|
||
virtual int verify_memory (const gdb_byte *data,
|
||
CORE_ADDR memaddr, ULONGEST size)
|
||
TARGET_DEFAULT_FUNC (default_verify_memory);
|
||
|
||
/* Return the address of the start of the Thread Information Block
|
||
a Windows OS specific feature. */
|
||
virtual bool get_tib_address (ptid_t ptid, CORE_ADDR *addr)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Send the new settings of write permission variables. */
|
||
virtual void set_permissions ()
|
||
TARGET_DEFAULT_IGNORE ();
|
||
|
||
/* Look for a static tracepoint marker at ADDR, and fill in MARKER
|
||
with its details. Return true on success, false on failure. */
|
||
virtual bool static_tracepoint_marker_at (CORE_ADDR,
|
||
static_tracepoint_marker *marker)
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
/* Return a vector of all tracepoints markers string id ID, or all
|
||
markers if ID is NULL. */
|
||
virtual std::vector<static_tracepoint_marker>
|
||
static_tracepoint_markers_by_strid (const char *id)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Return a traceframe info object describing the current
|
||
traceframe's contents. This method should not cache data;
|
||
higher layers take care of caching, invalidating, and
|
||
re-fetching when necessary. */
|
||
virtual traceframe_info_up traceframe_info ()
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Ask the target to use or not to use agent according to USE.
|
||
Return true if successful, false otherwise. */
|
||
virtual bool use_agent (bool use)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Is the target able to use agent in current state? */
|
||
virtual bool can_use_agent ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
/* Enable branch tracing for PTID using CONF configuration.
|
||
Return a branch trace target information struct for reading and for
|
||
disabling branch trace. */
|
||
virtual struct btrace_target_info *enable_btrace (ptid_t ptid,
|
||
const struct btrace_config *conf)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Disable branch tracing and deallocate TINFO. */
|
||
virtual void disable_btrace (struct btrace_target_info *tinfo)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Disable branch tracing and deallocate TINFO. This function is similar
|
||
to to_disable_btrace, except that it is called during teardown and is
|
||
only allowed to perform actions that are safe. A counter-example would
|
||
be attempting to talk to a remote target. */
|
||
virtual void teardown_btrace (struct btrace_target_info *tinfo)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Read branch trace data for the thread indicated by BTINFO into DATA.
|
||
DATA is cleared before new trace is added. */
|
||
virtual enum btrace_error read_btrace (struct btrace_data *data,
|
||
struct btrace_target_info *btinfo,
|
||
enum btrace_read_type type)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Get the branch trace configuration. */
|
||
virtual const struct btrace_config *btrace_conf (const struct btrace_target_info *)
|
||
TARGET_DEFAULT_RETURN (NULL);
|
||
|
||
/* Current recording method. */
|
||
virtual enum record_method record_method (ptid_t ptid)
|
||
TARGET_DEFAULT_RETURN (RECORD_METHOD_NONE);
|
||
|
||
/* Stop trace recording. */
|
||
virtual void stop_recording ()
|
||
TARGET_DEFAULT_IGNORE ();
|
||
|
||
/* Print information about the recording. */
|
||
virtual void info_record ()
|
||
TARGET_DEFAULT_IGNORE ();
|
||
|
||
/* Save the recorded execution trace into a file. */
|
||
virtual void save_record (const char *filename)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Delete the recorded execution trace from the current position
|
||
onwards. */
|
||
virtual bool supports_delete_record ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
virtual void delete_record ()
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Query if the record target is currently replaying PTID. */
|
||
virtual bool record_is_replaying (ptid_t ptid)
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
/* Query if the record target will replay PTID if it were resumed in
|
||
execution direction DIR. */
|
||
virtual bool record_will_replay (ptid_t ptid, int dir)
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
/* Stop replaying. */
|
||
virtual void record_stop_replaying ()
|
||
TARGET_DEFAULT_IGNORE ();
|
||
|
||
/* Go to the begin of the execution trace. */
|
||
virtual void goto_record_begin ()
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Go to the end of the execution trace. */
|
||
virtual void goto_record_end ()
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Go to a specific location in the recorded execution trace. */
|
||
virtual void goto_record (ULONGEST insn)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Disassemble SIZE instructions in the recorded execution trace from
|
||
the current position.
|
||
If SIZE < 0, disassemble abs (SIZE) preceding instructions; otherwise,
|
||
disassemble SIZE succeeding instructions. */
|
||
virtual void insn_history (int size, gdb_disassembly_flags flags)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Disassemble SIZE instructions in the recorded execution trace around
|
||
FROM.
|
||
If SIZE < 0, disassemble abs (SIZE) instructions before FROM; otherwise,
|
||
disassemble SIZE instructions after FROM. */
|
||
virtual void insn_history_from (ULONGEST from, int size,
|
||
gdb_disassembly_flags flags)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Disassemble a section of the recorded execution trace from instruction
|
||
BEGIN (inclusive) to instruction END (inclusive). */
|
||
virtual void insn_history_range (ULONGEST begin, ULONGEST end,
|
||
gdb_disassembly_flags flags)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Print a function trace of the recorded execution trace.
|
||
If SIZE < 0, print abs (SIZE) preceding functions; otherwise, print SIZE
|
||
succeeding functions. */
|
||
virtual void call_history (int size, record_print_flags flags)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Print a function trace of the recorded execution trace starting
|
||
at function FROM.
|
||
If SIZE < 0, print abs (SIZE) functions before FROM; otherwise, print
|
||
SIZE functions after FROM. */
|
||
virtual void call_history_from (ULONGEST begin, int size, record_print_flags flags)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* Print a function trace of an execution trace section from function BEGIN
|
||
(inclusive) to function END (inclusive). */
|
||
virtual void call_history_range (ULONGEST begin, ULONGEST end, record_print_flags flags)
|
||
TARGET_DEFAULT_NORETURN (tcomplain ());
|
||
|
||
/* True if TARGET_OBJECT_LIBRARIES_SVR4 may be read with a
|
||
non-empty annex. */
|
||
virtual bool augmented_libraries_svr4_read ()
|
||
TARGET_DEFAULT_RETURN (false);
|
||
|
||
/* Those unwinders are tried before any other arch unwinders. If
|
||
SELF doesn't have unwinders, it should delegate to the
|
||
"beneath" target. */
|
||
virtual const struct frame_unwind *get_unwinder ()
|
||
TARGET_DEFAULT_RETURN (NULL);
|
||
|
||
virtual const struct frame_unwind *get_tailcall_unwinder ()
|
||
TARGET_DEFAULT_RETURN (NULL);
|
||
|
||
/* Prepare to generate a core file. */
|
||
virtual void prepare_to_generate_core ()
|
||
TARGET_DEFAULT_IGNORE ();
|
||
|
||
/* Cleanup after generating a core file. */
|
||
virtual void done_generating_core ()
|
||
TARGET_DEFAULT_IGNORE ();
|
||
};
|
||
|
||
/* Deleter for std::unique_ptr. See comments in
|
||
target_ops::~target_ops and target_ops::close about heap-allocated
|
||
targets. */
|
||
struct target_ops_deleter
|
||
{
|
||
void operator() (target_ops *target)
|
||
{
|
||
target->close ();
|
||
}
|
||
};
|
||
|
||
/* A unique pointer for target_ops. */
|
||
typedef std::unique_ptr<target_ops, target_ops_deleter> target_ops_up;
|
||
|
||
/* Native target backends call this once at initialization time to
|
||
inform the core about which is the target that can respond to "run"
|
||
or "attach". Note: native targets are always singletons. */
|
||
extern void set_native_target (target_ops *target);
|
||
|
||
/* Get the registered native target, if there's one. Otherwise return
|
||
NULL. */
|
||
extern target_ops *get_native_target ();
|
||
|
||
/* Type that manages a target stack. See description of target stacks
|
||
and strata at the top of the file. */
|
||
|
||
class target_stack
|
||
{
|
||
public:
|
||
target_stack () = default;
|
||
DISABLE_COPY_AND_ASSIGN (target_stack);
|
||
|
||
/* Push a new target into the stack of the existing target
|
||
accessors, possibly superseding some existing accessor. */
|
||
void push (target_ops *t);
|
||
|
||
/* Remove a target from the stack, wherever it may be. Return true
|
||
if it was removed, false otherwise. */
|
||
bool unpush (target_ops *t);
|
||
|
||
/* Returns true if T is pushed on the target stack. */
|
||
bool is_pushed (target_ops *t) const
|
||
{ return at (t->stratum ()) == t; }
|
||
|
||
/* Return the target at STRATUM. */
|
||
target_ops *at (strata stratum) const { return m_stack[stratum]; }
|
||
|
||
/* Return the target at the top of the stack. */
|
||
target_ops *top () const { return at (m_top); }
|
||
|
||
/* Find the next target down the stack from the specified target. */
|
||
target_ops *find_beneath (const target_ops *t) const;
|
||
|
||
private:
|
||
/* The stratum of the top target. */
|
||
enum strata m_top {};
|
||
|
||
/* The stack, represented as an array, with one slot per stratum.
|
||
If no target is pushed at some stratum, the corresponding slot is
|
||
null. */
|
||
target_ops *m_stack[(int) debug_stratum + 1] {};
|
||
};
|
||
|
||
/* The ops structure for our "current" target process. This should
|
||
never be NULL. If there is no target, it points to the dummy_target. */
|
||
|
||
extern target_ops *current_top_target ();
|
||
|
||
/* Define easy words for doing these operations on our current target. */
|
||
|
||
#define target_shortname (current_top_target ()->shortname ())
|
||
#define target_longname (current_top_target ()->longname ())
|
||
|
||
/* Does whatever cleanup is required for a target that we are no
|
||
longer going to be calling. This routine is automatically always
|
||
called after popping the target off the target stack - the target's
|
||
own methods are no longer available through the target vector.
|
||
Closing file descriptors and freeing all memory allocated memory are
|
||
typical things it should do. */
|
||
|
||
void target_close (struct target_ops *targ);
|
||
|
||
/* Find the correct target to use for "attach". If a target on the
|
||
current stack supports attaching, then it is returned. Otherwise,
|
||
the default run target is returned. */
|
||
|
||
extern struct target_ops *find_attach_target (void);
|
||
|
||
/* Find the correct target to use for "run". If a target on the
|
||
current stack supports creating a new inferior, then it is
|
||
returned. Otherwise, the default run target is returned. */
|
||
|
||
extern struct target_ops *find_run_target (void);
|
||
|
||
/* Some targets don't generate traps when attaching to the inferior,
|
||
or their target_attach implementation takes care of the waiting.
|
||
These targets must set to_attach_no_wait. */
|
||
|
||
#define target_attach_no_wait() \
|
||
(current_top_target ()->attach_no_wait ())
|
||
|
||
/* The target_attach operation places a process under debugger control,
|
||
and stops the process.
|
||
|
||
This operation provides a target-specific hook that allows the
|
||
necessary bookkeeping to be performed after an attach completes. */
|
||
#define target_post_attach(pid) \
|
||
(current_top_target ()->post_attach) (pid)
|
||
|
||
/* Display a message indicating we're about to detach from the current
|
||
inferior process. */
|
||
|
||
extern void target_announce_detach (int from_tty);
|
||
|
||
/* Takes a program previously attached to and detaches it.
|
||
The program may resume execution (some targets do, some don't) and will
|
||
no longer stop on signals, etc. We better not have left any breakpoints
|
||
in the program or it'll die when it hits one. FROM_TTY says whether to be
|
||
verbose or not. */
|
||
|
||
extern void target_detach (inferior *inf, int from_tty);
|
||
|
||
/* Disconnect from the current target without resuming it (leaving it
|
||
waiting for a debugger). */
|
||
|
||
extern void target_disconnect (const char *, int);
|
||
|
||
/* Resume execution (or prepare for execution) of a target thread,
|
||
process or all processes. STEP says whether to hardware
|
||
single-step or to run free; SIGGNAL is the signal to be given to
|
||
the target, or GDB_SIGNAL_0 for no signal. The caller may not pass
|
||
GDB_SIGNAL_DEFAULT. A specific PTID means `step/resume only this
|
||
process id'. A wildcard PTID (all threads, or all threads of
|
||
process) means `step/resume INFERIOR_PTID, and let other threads
|
||
(for which the wildcard PTID matches) resume with their
|
||
'thread->suspend.stop_signal' signal (usually GDB_SIGNAL_0) if it
|
||
is in "pass" state, or with no signal if in "no pass" state.
|
||
|
||
In order to efficiently handle batches of resumption requests,
|
||
targets may implement this method such that it records the
|
||
resumption request, but defers the actual resumption to the
|
||
target_commit_resume method implementation. See
|
||
target_commit_resume below. */
|
||
extern void target_resume (ptid_t ptid, int step, enum gdb_signal signal);
|
||
|
||
/* Commit a series of resumption requests previously prepared with
|
||
target_resume calls.
|
||
|
||
GDB always calls target_commit_resume after calling target_resume
|
||
one or more times. A target may thus use this method in
|
||
coordination with the target_resume method to batch target-side
|
||
resumption requests. In that case, the target doesn't actually
|
||
resume in its target_resume implementation. Instead, it prepares
|
||
the resumption in target_resume, and defers the actual resumption
|
||
to target_commit_resume. E.g., the remote target uses this to
|
||
coalesce multiple resumption requests in a single vCont packet. */
|
||
extern void target_commit_resume ();
|
||
|
||
/* Setup to defer target_commit_resume calls, and reactivate
|
||
target_commit_resume on destruction, if it was previously
|
||
active. */
|
||
extern scoped_restore_tmpl<int> make_scoped_defer_target_commit_resume ();
|
||
|
||
/* For target_read_memory see target/target.h. */
|
||
|
||
/* The default target_ops::to_wait implementation. */
|
||
|
||
extern ptid_t default_target_wait (struct target_ops *ops,
|
||
ptid_t ptid,
|
||
struct target_waitstatus *status,
|
||
int options);
|
||
|
||
/* Fetch at least register REGNO, or all regs if regno == -1. No result. */
|
||
|
||
extern void target_fetch_registers (struct regcache *regcache, int regno);
|
||
|
||
/* Store at least register REGNO, or all regs if REGNO == -1.
|
||
It can store as many registers as it wants to, so target_prepare_to_store
|
||
must have been previously called. Calls error() if there are problems. */
|
||
|
||
extern void target_store_registers (struct regcache *regcache, int regs);
|
||
|
||
/* Get ready to modify the registers array. On machines which store
|
||
individual registers, this doesn't need to do anything. On machines
|
||
which store all the registers in one fell swoop, this makes sure
|
||
that REGISTERS contains all the registers from the program being
|
||
debugged. */
|
||
|
||
#define target_prepare_to_store(regcache) \
|
||
(current_top_target ()->prepare_to_store) (regcache)
|
||
|
||
/* Determine current address space of thread PTID. */
|
||
|
||
struct address_space *target_thread_address_space (ptid_t);
|
||
|
||
/* Implement the "info proc" command. This returns one if the request
|
||
was handled, and zero otherwise. It can also throw an exception if
|
||
an error was encountered while attempting to handle the
|
||
request. */
|
||
|
||
int target_info_proc (const char *, enum info_proc_what);
|
||
|
||
/* Returns true if this target can disable address space randomization. */
|
||
|
||
int target_supports_disable_randomization (void);
|
||
|
||
/* Returns true if this target can enable and disable tracepoints
|
||
while a trace experiment is running. */
|
||
|
||
#define target_supports_enable_disable_tracepoint() \
|
||
(current_top_target ()->supports_enable_disable_tracepoint) ()
|
||
|
||
#define target_supports_string_tracing() \
|
||
(current_top_target ()->supports_string_tracing) ()
|
||
|
||
/* Returns true if this target can handle breakpoint conditions
|
||
on its end. */
|
||
|
||
#define target_supports_evaluation_of_breakpoint_conditions() \
|
||
(current_top_target ()->supports_evaluation_of_breakpoint_conditions) ()
|
||
|
||
/* Returns true if this target can handle breakpoint commands
|
||
on its end. */
|
||
|
||
#define target_can_run_breakpoint_commands() \
|
||
(current_top_target ()->can_run_breakpoint_commands) ()
|
||
|
||
extern int target_read_string (CORE_ADDR, gdb::unique_xmalloc_ptr<char> *,
|
||
int, int *);
|
||
|
||
/* For target_read_memory see target/target.h. */
|
||
|
||
extern int target_read_raw_memory (CORE_ADDR memaddr, gdb_byte *myaddr,
|
||
ssize_t len);
|
||
|
||
extern int target_read_stack (CORE_ADDR memaddr, gdb_byte *myaddr, ssize_t len);
|
||
|
||
extern int target_read_code (CORE_ADDR memaddr, gdb_byte *myaddr, ssize_t len);
|
||
|
||
/* For target_write_memory see target/target.h. */
|
||
|
||
extern int target_write_raw_memory (CORE_ADDR memaddr, const gdb_byte *myaddr,
|
||
ssize_t len);
|
||
|
||
/* Fetches the target's memory map. If one is found it is sorted
|
||
and returned, after some consistency checking. Otherwise, NULL
|
||
is returned. */
|
||
std::vector<mem_region> target_memory_map (void);
|
||
|
||
/* Erases all flash memory regions on the target. */
|
||
void flash_erase_command (const char *cmd, int from_tty);
|
||
|
||
/* Erase the specified flash region. */
|
||
void target_flash_erase (ULONGEST address, LONGEST length);
|
||
|
||
/* Finish a sequence of flash operations. */
|
||
void target_flash_done (void);
|
||
|
||
/* Describes a request for a memory write operation. */
|
||
struct memory_write_request
|
||
{
|
||
memory_write_request (ULONGEST begin_, ULONGEST end_,
|
||
gdb_byte *data_ = nullptr, void *baton_ = nullptr)
|
||
: begin (begin_), end (end_), data (data_), baton (baton_)
|
||
{}
|
||
|
||
/* Begining address that must be written. */
|
||
ULONGEST begin;
|
||
/* Past-the-end address. */
|
||
ULONGEST end;
|
||
/* The data to write. */
|
||
gdb_byte *data;
|
||
/* A callback baton for progress reporting for this request. */
|
||
void *baton;
|
||
};
|
||
|
||
/* Enumeration specifying different flash preservation behaviour. */
|
||
enum flash_preserve_mode
|
||
{
|
||
flash_preserve,
|
||
flash_discard
|
||
};
|
||
|
||
/* Write several memory blocks at once. This version can be more
|
||
efficient than making several calls to target_write_memory, in
|
||
particular because it can optimize accesses to flash memory.
|
||
|
||
Moreover, this is currently the only memory access function in gdb
|
||
that supports writing to flash memory, and it should be used for
|
||
all cases where access to flash memory is desirable.
|
||
|
||
REQUESTS is the vector (see vec.h) of memory_write_request.
|
||
PRESERVE_FLASH_P indicates what to do with blocks which must be
|
||
erased, but not completely rewritten.
|
||
PROGRESS_CB is a function that will be periodically called to provide
|
||
feedback to user. It will be called with the baton corresponding
|
||
to the request currently being written. It may also be called
|
||
with a NULL baton, when preserved flash sectors are being rewritten.
|
||
|
||
The function returns 0 on success, and error otherwise. */
|
||
int target_write_memory_blocks
|
||
(const std::vector<memory_write_request> &requests,
|
||
enum flash_preserve_mode preserve_flash_p,
|
||
void (*progress_cb) (ULONGEST, void *));
|
||
|
||
/* Print a line about the current target. */
|
||
|
||
#define target_files_info() \
|
||
(current_top_target ()->files_info) ()
|
||
|
||
/* Insert a breakpoint at address BP_TGT->placed_address in
|
||
the target machine. Returns 0 for success, and returns non-zero or
|
||
throws an error (with a detailed failure reason error code and
|
||
message) otherwise. */
|
||
|
||
extern int target_insert_breakpoint (struct gdbarch *gdbarch,
|
||
struct bp_target_info *bp_tgt);
|
||
|
||
/* Remove a breakpoint at address BP_TGT->placed_address in the target
|
||
machine. Result is 0 for success, non-zero for error. */
|
||
|
||
extern int target_remove_breakpoint (struct gdbarch *gdbarch,
|
||
struct bp_target_info *bp_tgt,
|
||
enum remove_bp_reason reason);
|
||
|
||
/* Return true if the target stack has a non-default
|
||
"terminal_ours" method. */
|
||
|
||
extern bool target_supports_terminal_ours (void);
|
||
|
||
/* Kill the inferior process. Make it go away. */
|
||
|
||
extern void target_kill (void);
|
||
|
||
/* Load an executable file into the target process. This is expected
|
||
to not only bring new code into the target process, but also to
|
||
update GDB's symbol tables to match.
|
||
|
||
ARG contains command-line arguments, to be broken down with
|
||
buildargv (). The first non-switch argument is the filename to
|
||
load, FILE; the second is a number (as parsed by strtoul (..., ...,
|
||
0)), which is an offset to apply to the load addresses of FILE's
|
||
sections. The target may define switches, or other non-switch
|
||
arguments, as it pleases. */
|
||
|
||
extern void target_load (const char *arg, int from_tty);
|
||
|
||
/* Some targets (such as ttrace-based HPUX) don't allow us to request
|
||
notification of inferior events such as fork and vork immediately
|
||
after the inferior is created. (This because of how gdb gets an
|
||
inferior created via invoking a shell to do it. In such a scenario,
|
||
if the shell init file has commands in it, the shell will fork and
|
||
exec for each of those commands, and we will see each such fork
|
||
event. Very bad.)
|
||
|
||
Such targets will supply an appropriate definition for this function. */
|
||
|
||
#define target_post_startup_inferior(ptid) \
|
||
(current_top_target ()->post_startup_inferior) (ptid)
|
||
|
||
/* On some targets, we can catch an inferior fork or vfork event when
|
||
it occurs. These functions insert/remove an already-created
|
||
catchpoint for such events. They return 0 for success, 1 if the
|
||
catchpoint type is not supported and -1 for failure. */
|
||
|
||
#define target_insert_fork_catchpoint(pid) \
|
||
(current_top_target ()->insert_fork_catchpoint) (pid)
|
||
|
||
#define target_remove_fork_catchpoint(pid) \
|
||
(current_top_target ()->remove_fork_catchpoint) (pid)
|
||
|
||
#define target_insert_vfork_catchpoint(pid) \
|
||
(current_top_target ()->insert_vfork_catchpoint) (pid)
|
||
|
||
#define target_remove_vfork_catchpoint(pid) \
|
||
(current_top_target ()->remove_vfork_catchpoint) (pid)
|
||
|
||
/* If the inferior forks or vforks, this function will be called at
|
||
the next resume in order to perform any bookkeeping and fiddling
|
||
necessary to continue debugging either the parent or child, as
|
||
requested, and releasing the other. Information about the fork
|
||
or vfork event is available via get_last_target_status ().
|
||
This function returns 1 if the inferior should not be resumed
|
||
(i.e. there is another event pending). */
|
||
|
||
int target_follow_fork (int follow_child, int detach_fork);
|
||
|
||
/* Handle the target-specific bookkeeping required when the inferior
|
||
makes an exec call. INF is the exec'd inferior. */
|
||
|
||
void target_follow_exec (struct inferior *inf, const char *execd_pathname);
|
||
|
||
/* On some targets, we can catch an inferior exec event when it
|
||
occurs. These functions insert/remove an already-created
|
||
catchpoint for such events. They return 0 for success, 1 if the
|
||
catchpoint type is not supported and -1 for failure. */
|
||
|
||
#define target_insert_exec_catchpoint(pid) \
|
||
(current_top_target ()->insert_exec_catchpoint) (pid)
|
||
|
||
#define target_remove_exec_catchpoint(pid) \
|
||
(current_top_target ()->remove_exec_catchpoint) (pid)
|
||
|
||
/* Syscall catch.
|
||
|
||
NEEDED is true if any syscall catch (of any kind) is requested.
|
||
If NEEDED is false, it means the target can disable the mechanism to
|
||
catch system calls because there are no more catchpoints of this type.
|
||
|
||
ANY_COUNT is nonzero if a generic (filter-less) syscall catch is
|
||
being requested. In this case, SYSCALL_COUNTS should be ignored.
|
||
|
||
SYSCALL_COUNTS is an array of ints, indexed by syscall number. An
|
||
element in this array is nonzero if that syscall should be caught.
|
||
This argument only matters if ANY_COUNT is zero.
|
||
|
||
Return 0 for success, 1 if syscall catchpoints are not supported or -1
|
||
for failure. */
|
||
|
||
#define target_set_syscall_catchpoint(pid, needed, any_count, syscall_counts) \
|
||
(current_top_target ()->set_syscall_catchpoint) (pid, needed, any_count, \
|
||
syscall_counts)
|
||
|
||
/* The debugger has completed a blocking wait() call. There is now
|
||
some process event that must be processed. This function should
|
||
be defined by those targets that require the debugger to perform
|
||
cleanup or internal state changes in response to the process event. */
|
||
|
||
/* For target_mourn_inferior see target/target.h. */
|
||
|
||
/* Does target have enough data to do a run or attach command? */
|
||
|
||
extern int target_can_run ();
|
||
|
||
/* Set list of signals to be handled in the target.
|
||
|
||
PASS_SIGNALS is an array indexed by target signal number
|
||
(enum gdb_signal). For every signal whose entry in this array is
|
||
non-zero, the target is allowed -but not required- to skip reporting
|
||
arrival of the signal to the GDB core by returning from target_wait,
|
||
and to pass the signal directly to the inferior instead.
|
||
|
||
However, if the target is hardware single-stepping a thread that is
|
||
about to receive a signal, it needs to be reported in any case, even
|
||
if mentioned in a previous target_pass_signals call. */
|
||
|
||
extern void target_pass_signals
|
||
(gdb::array_view<const unsigned char> pass_signals);
|
||
|
||
/* Set list of signals the target may pass to the inferior. This
|
||
directly maps to the "handle SIGNAL pass/nopass" setting.
|
||
|
||
PROGRAM_SIGNALS is an array indexed by target signal
|
||
number (enum gdb_signal). For every signal whose entry in this
|
||
array is non-zero, the target is allowed to pass the signal to the
|
||
inferior. Signals not present in the array shall be silently
|
||
discarded. This does not influence whether to pass signals to the
|
||
inferior as a result of a target_resume call. This is useful in
|
||
scenarios where the target needs to decide whether to pass or not a
|
||
signal to the inferior without GDB core involvement, such as for
|
||
example, when detaching (as threads may have been suspended with
|
||
pending signals not reported to GDB). */
|
||
|
||
extern void target_program_signals
|
||
(gdb::array_view<const unsigned char> program_signals);
|
||
|
||
/* Check to see if a thread is still alive. */
|
||
|
||
extern int target_thread_alive (ptid_t ptid);
|
||
|
||
/* Sync the target's threads with GDB's thread list. */
|
||
|
||
extern void target_update_thread_list (void);
|
||
|
||
/* Make target stop in a continuable fashion. (For instance, under
|
||
Unix, this should act like SIGSTOP). Note that this function is
|
||
asynchronous: it does not wait for the target to become stopped
|
||
before returning. If this is the behavior you want please use
|
||
target_stop_and_wait. */
|
||
|
||
extern void target_stop (ptid_t ptid);
|
||
|
||
/* Interrupt the target. Unlike target_stop, this does not specify
|
||
which thread/process reports the stop. For most target this acts
|
||
like raising a SIGINT, though that's not absolutely required. This
|
||
function is asynchronous. */
|
||
|
||
extern void target_interrupt ();
|
||
|
||
/* Pass a ^C, as determined to have been pressed by checking the quit
|
||
flag, to the target, as if the user had typed the ^C on the
|
||
inferior's controlling terminal while the inferior was in the
|
||
foreground. Remote targets may take the opportunity to detect the
|
||
remote side is not responding and offer to disconnect. */
|
||
|
||
extern void target_pass_ctrlc (void);
|
||
|
||
/* The default target_ops::to_pass_ctrlc implementation. Simply calls
|
||
target_interrupt. */
|
||
extern void default_target_pass_ctrlc (struct target_ops *ops);
|
||
|
||
/* Send the specified COMMAND to the target's monitor
|
||
(shell,interpreter) for execution. The result of the query is
|
||
placed in OUTBUF. */
|
||
|
||
#define target_rcmd(command, outbuf) \
|
||
(current_top_target ()->rcmd) (command, outbuf)
|
||
|
||
|
||
/* Does the target include all of memory, or only part of it? This
|
||
determines whether we look up the target chain for other parts of
|
||
memory if this target can't satisfy a request. */
|
||
|
||
extern int target_has_all_memory_1 (void);
|
||
#define target_has_all_memory target_has_all_memory_1 ()
|
||
|
||
/* Does the target include memory? (Dummy targets don't.) */
|
||
|
||
extern int target_has_memory_1 (void);
|
||
#define target_has_memory target_has_memory_1 ()
|
||
|
||
/* Does the target have a stack? (Exec files don't, VxWorks doesn't, until
|
||
we start a process.) */
|
||
|
||
extern int target_has_stack_1 (void);
|
||
#define target_has_stack target_has_stack_1 ()
|
||
|
||
/* Does the target have registers? (Exec files don't.) */
|
||
|
||
extern int target_has_registers_1 (void);
|
||
#define target_has_registers target_has_registers_1 ()
|
||
|
||
/* Does the target have execution? Can we make it jump (through
|
||
hoops), or pop its stack a few times? This means that the current
|
||
target is currently executing; for some targets, that's the same as
|
||
whether or not the target is capable of execution, but there are
|
||
also targets which can be current while not executing. In that
|
||
case this will become true after to_create_inferior or
|
||
to_attach. */
|
||
|
||
extern int target_has_execution_1 (ptid_t);
|
||
|
||
/* Like target_has_execution_1, but always passes inferior_ptid. */
|
||
|
||
extern int target_has_execution_current (void);
|
||
|
||
#define target_has_execution target_has_execution_current ()
|
||
|
||
/* Can the target support the debugger control of thread execution?
|
||
Can it lock the thread scheduler? */
|
||
|
||
#define target_can_lock_scheduler \
|
||
(current_top_target ()->get_thread_control_capabilities () & tc_schedlock)
|
||
|
||
/* Controls whether async mode is permitted. */
|
||
extern int target_async_permitted;
|
||
|
||
/* Can the target support asynchronous execution? */
|
||
#define target_can_async_p() (current_top_target ()->can_async_p ())
|
||
|
||
/* Is the target in asynchronous execution mode? */
|
||
#define target_is_async_p() (current_top_target ()->is_async_p ())
|
||
|
||
/* Enables/disabled async target events. */
|
||
extern void target_async (int enable);
|
||
|
||
/* Enables/disables thread create and exit events. */
|
||
extern void target_thread_events (int enable);
|
||
|
||
/* Whether support for controlling the target backends always in
|
||
non-stop mode is enabled. */
|
||
extern enum auto_boolean target_non_stop_enabled;
|
||
|
||
/* Is the target in non-stop mode? Some targets control the inferior
|
||
in non-stop mode even with "set non-stop off". Always true if "set
|
||
non-stop" is on. */
|
||
extern int target_is_non_stop_p (void);
|
||
|
||
#define target_execution_direction() \
|
||
(current_top_target ()->execution_direction ())
|
||
|
||
/* Converts a process id to a string. Usually, the string just contains
|
||
`process xyz', but on some systems it may contain
|
||
`process xyz thread abc'. */
|
||
|
||
extern std::string target_pid_to_str (ptid_t ptid);
|
||
|
||
extern std::string normal_pid_to_str (ptid_t ptid);
|
||
|
||
/* Return a short string describing extra information about PID,
|
||
e.g. "sleeping", "runnable", "running on LWP 3". Null return value
|
||
is okay. */
|
||
|
||
#define target_extra_thread_info(TP) \
|
||
(current_top_target ()->extra_thread_info (TP))
|
||
|
||
/* Return the thread's name, or NULL if the target is unable to determine it.
|
||
The returned value must not be freed by the caller. */
|
||
|
||
extern const char *target_thread_name (struct thread_info *);
|
||
|
||
/* Given a pointer to a thread library specific thread handle and
|
||
its length, return a pointer to the corresponding thread_info struct. */
|
||
|
||
extern struct thread_info *target_thread_handle_to_thread_info
|
||
(const gdb_byte *thread_handle, int handle_len, struct inferior *inf);
|
||
|
||
/* Given a thread, return the thread handle, a target-specific sequence of
|
||
bytes which serves as a thread identifier within the program being
|
||
debugged. */
|
||
extern gdb::byte_vector target_thread_info_to_thread_handle
|
||
(struct thread_info *);
|
||
|
||
/* Attempts to find the pathname of the executable file
|
||
that was run to create a specified process.
|
||
|
||
The process PID must be stopped when this operation is used.
|
||
|
||
If the executable file cannot be determined, NULL is returned.
|
||
|
||
Else, a pointer to a character string containing the pathname
|
||
is returned. This string should be copied into a buffer by
|
||
the client if the string will not be immediately used, or if
|
||
it must persist. */
|
||
|
||
#define target_pid_to_exec_file(pid) \
|
||
(current_top_target ()->pid_to_exec_file) (pid)
|
||
|
||
/* See the to_thread_architecture description in struct target_ops. */
|
||
|
||
#define target_thread_architecture(ptid) \
|
||
(current_top_target ()->thread_architecture (ptid))
|
||
|
||
/*
|
||
* Iterator function for target memory regions.
|
||
* Calls a callback function once for each memory region 'mapped'
|
||
* in the child process. Defined as a simple macro rather than
|
||
* as a function macro so that it can be tested for nullity.
|
||
*/
|
||
|
||
#define target_find_memory_regions(FUNC, DATA) \
|
||
(current_top_target ()->find_memory_regions) (FUNC, DATA)
|
||
|
||
/*
|
||
* Compose corefile .note section.
|
||
*/
|
||
|
||
#define target_make_corefile_notes(BFD, SIZE_P) \
|
||
(current_top_target ()->make_corefile_notes) (BFD, SIZE_P)
|
||
|
||
/* Bookmark interfaces. */
|
||
#define target_get_bookmark(ARGS, FROM_TTY) \
|
||
(current_top_target ()->get_bookmark) (ARGS, FROM_TTY)
|
||
|
||
#define target_goto_bookmark(ARG, FROM_TTY) \
|
||
(current_top_target ()->goto_bookmark) (ARG, FROM_TTY)
|
||
|
||
/* Hardware watchpoint interfaces. */
|
||
|
||
/* GDB's current model is that there are three "kinds" of watchpoints,
|
||
with respect to when they trigger and how you can move past them.
|
||
|
||
Those are: continuable, steppable, and non-steppable.
|
||
|
||
Continuable watchpoints are like x86's -- those trigger after the
|
||
memory access's side effects are fully committed to memory. I.e.,
|
||
they trap with the PC pointing at the next instruction already.
|
||
Continuing past such a watchpoint is doable by just normally
|
||
continuing, hence the name.
|
||
|
||
Both steppable and non-steppable watchpoints trap before the memory
|
||
access. I.e, the PC points at the instruction that is accessing
|
||
the memory. So GDB needs to single-step once past the current
|
||
instruction in order to make the access effective and check whether
|
||
the instruction's side effects change the watched expression.
|
||
|
||
Now, in order to step past that instruction, depending on
|
||
architecture and target, you can have two situations:
|
||
|
||
- steppable watchpoints: you can single-step with the watchpoint
|
||
still armed, and the watchpoint won't trigger again.
|
||
|
||
- non-steppable watchpoints: if you try to single-step with the
|
||
watchpoint still armed, you'd trap the watchpoint again and the
|
||
thread wouldn't make any progress. So GDB needs to temporarily
|
||
remove the watchpoint in order to step past it.
|
||
|
||
If your target/architecture does not signal that it has either
|
||
steppable or non-steppable watchpoints via either
|
||
target_have_steppable_watchpoint or
|
||
gdbarch_have_nonsteppable_watchpoint, GDB assumes continuable
|
||
watchpoints. */
|
||
|
||
/* Returns non-zero if we were stopped by a hardware watchpoint (memory read or
|
||
write). Only the INFERIOR_PTID task is being queried. */
|
||
|
||
#define target_stopped_by_watchpoint() \
|
||
((current_top_target ()->stopped_by_watchpoint) ())
|
||
|
||
/* Returns non-zero if the target stopped because it executed a
|
||
software breakpoint instruction. */
|
||
|
||
#define target_stopped_by_sw_breakpoint() \
|
||
((current_top_target ()->stopped_by_sw_breakpoint) ())
|
||
|
||
#define target_supports_stopped_by_sw_breakpoint() \
|
||
((current_top_target ()->supports_stopped_by_sw_breakpoint) ())
|
||
|
||
#define target_stopped_by_hw_breakpoint() \
|
||
((current_top_target ()->stopped_by_hw_breakpoint) ())
|
||
|
||
#define target_supports_stopped_by_hw_breakpoint() \
|
||
((current_top_target ()->supports_stopped_by_hw_breakpoint) ())
|
||
|
||
/* Non-zero if we have steppable watchpoints */
|
||
|
||
#define target_have_steppable_watchpoint \
|
||
(current_top_target ()->have_steppable_watchpoint ())
|
||
|
||
/* Provide defaults for hardware watchpoint functions. */
|
||
|
||
/* If the *_hw_beakpoint functions have not been defined
|
||
elsewhere use the definitions in the target vector. */
|
||
|
||
/* Returns positive if we can set a hardware watchpoint of type TYPE.
|
||
Returns negative if the target doesn't have enough hardware debug
|
||
registers available. Return zero if hardware watchpoint of type
|
||
TYPE isn't supported. TYPE is one of bp_hardware_watchpoint,
|
||
bp_read_watchpoint, bp_write_watchpoint, or bp_hardware_breakpoint.
|
||
CNT is the number of such watchpoints used so far, including this
|
||
one. OTHERTYPE is the number of watchpoints of other types than
|
||
this one used so far. */
|
||
|
||
#define target_can_use_hardware_watchpoint(TYPE,CNT,OTHERTYPE) \
|
||
(current_top_target ()->can_use_hw_breakpoint) ( \
|
||
TYPE, CNT, OTHERTYPE)
|
||
|
||
/* Returns the number of debug registers needed to watch the given
|
||
memory region, or zero if not supported. */
|
||
|
||
#define target_region_ok_for_hw_watchpoint(addr, len) \
|
||
(current_top_target ()->region_ok_for_hw_watchpoint) (addr, len)
|
||
|
||
|
||
#define target_can_do_single_step() \
|
||
(current_top_target ()->can_do_single_step) ()
|
||
|
||
/* Set/clear a hardware watchpoint starting at ADDR, for LEN bytes.
|
||
TYPE is 0 for write, 1 for read, and 2 for read/write accesses.
|
||
COND is the expression for its condition, or NULL if there's none.
|
||
Returns 0 for success, 1 if the watchpoint type is not supported,
|
||
-1 for failure. */
|
||
|
||
#define target_insert_watchpoint(addr, len, type, cond) \
|
||
(current_top_target ()->insert_watchpoint) (addr, len, type, cond)
|
||
|
||
#define target_remove_watchpoint(addr, len, type, cond) \
|
||
(current_top_target ()->remove_watchpoint) (addr, len, type, cond)
|
||
|
||
/* Insert a new masked watchpoint at ADDR using the mask MASK.
|
||
RW may be hw_read for a read watchpoint, hw_write for a write watchpoint
|
||
or hw_access for an access watchpoint. Returns 0 for success, 1 if
|
||
masked watchpoints are not supported, -1 for failure. */
|
||
|
||
extern int target_insert_mask_watchpoint (CORE_ADDR, CORE_ADDR,
|
||
enum target_hw_bp_type);
|
||
|
||
/* Remove a masked watchpoint at ADDR with the mask MASK.
|
||
RW may be hw_read for a read watchpoint, hw_write for a write watchpoint
|
||
or hw_access for an access watchpoint. Returns 0 for success, non-zero
|
||
for failure. */
|
||
|
||
extern int target_remove_mask_watchpoint (CORE_ADDR, CORE_ADDR,
|
||
enum target_hw_bp_type);
|
||
|
||
/* Insert a hardware breakpoint at address BP_TGT->placed_address in
|
||
the target machine. Returns 0 for success, and returns non-zero or
|
||
throws an error (with a detailed failure reason error code and
|
||
message) otherwise. */
|
||
|
||
#define target_insert_hw_breakpoint(gdbarch, bp_tgt) \
|
||
(current_top_target ()->insert_hw_breakpoint) (gdbarch, bp_tgt)
|
||
|
||
#define target_remove_hw_breakpoint(gdbarch, bp_tgt) \
|
||
(current_top_target ()->remove_hw_breakpoint) (gdbarch, bp_tgt)
|
||
|
||
/* Return number of debug registers needed for a ranged breakpoint,
|
||
or -1 if ranged breakpoints are not supported. */
|
||
|
||
extern int target_ranged_break_num_registers (void);
|
||
|
||
/* Return non-zero if target knows the data address which triggered this
|
||
target_stopped_by_watchpoint, in such case place it to *ADDR_P. Only the
|
||
INFERIOR_PTID task is being queried. */
|
||
#define target_stopped_data_address(target, addr_p) \
|
||
(target)->stopped_data_address (addr_p)
|
||
|
||
/* Return non-zero if ADDR is within the range of a watchpoint spanning
|
||
LENGTH bytes beginning at START. */
|
||
#define target_watchpoint_addr_within_range(target, addr, start, length) \
|
||
(target)->watchpoint_addr_within_range (addr, start, length)
|
||
|
||
/* Return non-zero if the target is capable of using hardware to evaluate
|
||
the condition expression. In this case, if the condition is false when
|
||
the watched memory location changes, execution may continue without the
|
||
debugger being notified.
|
||
|
||
Due to limitations in the hardware implementation, it may be capable of
|
||
avoiding triggering the watchpoint in some cases where the condition
|
||
expression is false, but may report some false positives as well.
|
||
For this reason, GDB will still evaluate the condition expression when
|
||
the watchpoint triggers. */
|
||
#define target_can_accel_watchpoint_condition(addr, len, type, cond) \
|
||
(current_top_target ()->can_accel_watchpoint_condition) (addr, len, type, cond)
|
||
|
||
/* Return number of debug registers needed for a masked watchpoint,
|
||
-1 if masked watchpoints are not supported or -2 if the given address
|
||
and mask combination cannot be used. */
|
||
|
||
extern int target_masked_watch_num_registers (CORE_ADDR addr, CORE_ADDR mask);
|
||
|
||
/* Target can execute in reverse? */
|
||
#define target_can_execute_reverse \
|
||
current_top_target ()->can_execute_reverse ()
|
||
|
||
extern const struct target_desc *target_read_description (struct target_ops *);
|
||
|
||
#define target_get_ada_task_ptid(lwp, tid) \
|
||
(current_top_target ()->get_ada_task_ptid) (lwp,tid)
|
||
|
||
/* Utility implementation of searching memory. */
|
||
extern int simple_search_memory (struct target_ops* ops,
|
||
CORE_ADDR start_addr,
|
||
ULONGEST search_space_len,
|
||
const gdb_byte *pattern,
|
||
ULONGEST pattern_len,
|
||
CORE_ADDR *found_addrp);
|
||
|
||
/* Main entry point for searching memory. */
|
||
extern int target_search_memory (CORE_ADDR start_addr,
|
||
ULONGEST search_space_len,
|
||
const gdb_byte *pattern,
|
||
ULONGEST pattern_len,
|
||
CORE_ADDR *found_addrp);
|
||
|
||
/* Target file operations. */
|
||
|
||
/* Return nonzero if the filesystem seen by the current inferior
|
||
is the local filesystem, zero otherwise. */
|
||
#define target_filesystem_is_local() \
|
||
current_top_target ()->filesystem_is_local ()
|
||
|
||
/* Open FILENAME on the target, in the filesystem as seen by INF,
|
||
using FLAGS and MODE. If INF is NULL, use the filesystem seen
|
||
by the debugger (GDB or, for remote targets, the remote stub).
|
||
Return a target file descriptor, or -1 if an error occurs (and
|
||
set *TARGET_ERRNO). */
|
||
extern int target_fileio_open (struct inferior *inf,
|
||
const char *filename, int flags,
|
||
int mode, int *target_errno);
|
||
|
||
/* Like target_fileio_open, but print a warning message if the
|
||
file is being accessed over a link that may be slow. */
|
||
extern int target_fileio_open_warn_if_slow (struct inferior *inf,
|
||
const char *filename,
|
||
int flags,
|
||
int mode,
|
||
int *target_errno);
|
||
|
||
/* Write up to LEN bytes from WRITE_BUF to FD on the target.
|
||
Return the number of bytes written, or -1 if an error occurs
|
||
(and set *TARGET_ERRNO). */
|
||
extern int target_fileio_pwrite (int fd, const gdb_byte *write_buf, int len,
|
||
ULONGEST offset, int *target_errno);
|
||
|
||
/* Read up to LEN bytes FD on the target into READ_BUF.
|
||
Return the number of bytes read, or -1 if an error occurs
|
||
(and set *TARGET_ERRNO). */
|
||
extern int target_fileio_pread (int fd, gdb_byte *read_buf, int len,
|
||
ULONGEST offset, int *target_errno);
|
||
|
||
/* Get information about the file opened as FD on the target
|
||
and put it in SB. Return 0 on success, or -1 if an error
|
||
occurs (and set *TARGET_ERRNO). */
|
||
extern int target_fileio_fstat (int fd, struct stat *sb,
|
||
int *target_errno);
|
||
|
||
/* Close FD on the target. Return 0, or -1 if an error occurs
|
||
(and set *TARGET_ERRNO). */
|
||
extern int target_fileio_close (int fd, int *target_errno);
|
||
|
||
/* Unlink FILENAME on the target, in the filesystem as seen by INF.
|
||
If INF is NULL, use the filesystem seen by the debugger (GDB or,
|
||
for remote targets, the remote stub). Return 0, or -1 if an error
|
||
occurs (and set *TARGET_ERRNO). */
|
||
extern int target_fileio_unlink (struct inferior *inf,
|
||
const char *filename,
|
||
int *target_errno);
|
||
|
||
/* Read value of symbolic link FILENAME on the target, in the
|
||
filesystem as seen by INF. If INF is NULL, use the filesystem seen
|
||
by the debugger (GDB or, for remote targets, the remote stub).
|
||
Return a null-terminated string allocated via xmalloc, or NULL if
|
||
an error occurs (and set *TARGET_ERRNO). */
|
||
extern gdb::optional<std::string> target_fileio_readlink
|
||
(struct inferior *inf, const char *filename, int *target_errno);
|
||
|
||
/* Read target file FILENAME, in the filesystem as seen by INF. If
|
||
INF is NULL, use the filesystem seen by the debugger (GDB or, for
|
||
remote targets, the remote stub). The return value will be -1 if
|
||
the transfer fails or is not supported; 0 if the object is empty;
|
||
or the length of the object otherwise. If a positive value is
|
||
returned, a sufficiently large buffer will be allocated using
|
||
xmalloc and returned in *BUF_P containing the contents of the
|
||
object.
|
||
|
||
This method should be used for objects sufficiently small to store
|
||
in a single xmalloc'd buffer, when no fixed bound on the object's
|
||
size is known in advance. */
|
||
extern LONGEST target_fileio_read_alloc (struct inferior *inf,
|
||
const char *filename,
|
||
gdb_byte **buf_p);
|
||
|
||
/* Read target file FILENAME, in the filesystem as seen by INF. If
|
||
INF is NULL, use the filesystem seen by the debugger (GDB or, for
|
||
remote targets, the remote stub). The result is NUL-terminated and
|
||
returned as a string, allocated using xmalloc. If an error occurs
|
||
or the transfer is unsupported, NULL is returned. Empty objects
|
||
are returned as allocated but empty strings. A warning is issued
|
||
if the result contains any embedded NUL bytes. */
|
||
extern gdb::unique_xmalloc_ptr<char> target_fileio_read_stralloc
|
||
(struct inferior *inf, const char *filename);
|
||
|
||
|
||
/* Tracepoint-related operations. */
|
||
|
||
#define target_trace_init() \
|
||
(current_top_target ()->trace_init) ()
|
||
|
||
#define target_download_tracepoint(t) \
|
||
(current_top_target ()->download_tracepoint) (t)
|
||
|
||
#define target_can_download_tracepoint() \
|
||
(current_top_target ()->can_download_tracepoint) ()
|
||
|
||
#define target_download_trace_state_variable(tsv) \
|
||
(current_top_target ()->download_trace_state_variable) (tsv)
|
||
|
||
#define target_enable_tracepoint(loc) \
|
||
(current_top_target ()->enable_tracepoint) (loc)
|
||
|
||
#define target_disable_tracepoint(loc) \
|
||
(current_top_target ()->disable_tracepoint) (loc)
|
||
|
||
#define target_trace_start() \
|
||
(current_top_target ()->trace_start) ()
|
||
|
||
#define target_trace_set_readonly_regions() \
|
||
(current_top_target ()->trace_set_readonly_regions) ()
|
||
|
||
#define target_get_trace_status(ts) \
|
||
(current_top_target ()->get_trace_status) (ts)
|
||
|
||
#define target_get_tracepoint_status(tp,utp) \
|
||
(current_top_target ()->get_tracepoint_status) (tp, utp)
|
||
|
||
#define target_trace_stop() \
|
||
(current_top_target ()->trace_stop) ()
|
||
|
||
#define target_trace_find(type,num,addr1,addr2,tpp) \
|
||
(current_top_target ()->trace_find) (\
|
||
(type), (num), (addr1), (addr2), (tpp))
|
||
|
||
#define target_get_trace_state_variable_value(tsv,val) \
|
||
(current_top_target ()->get_trace_state_variable_value) ((tsv), (val))
|
||
|
||
#define target_save_trace_data(filename) \
|
||
(current_top_target ()->save_trace_data) (filename)
|
||
|
||
#define target_upload_tracepoints(utpp) \
|
||
(current_top_target ()->upload_tracepoints) (utpp)
|
||
|
||
#define target_upload_trace_state_variables(utsvp) \
|
||
(current_top_target ()->upload_trace_state_variables) (utsvp)
|
||
|
||
#define target_get_raw_trace_data(buf,offset,len) \
|
||
(current_top_target ()->get_raw_trace_data) ((buf), (offset), (len))
|
||
|
||
#define target_get_min_fast_tracepoint_insn_len() \
|
||
(current_top_target ()->get_min_fast_tracepoint_insn_len) ()
|
||
|
||
#define target_set_disconnected_tracing(val) \
|
||
(current_top_target ()->set_disconnected_tracing) (val)
|
||
|
||
#define target_set_circular_trace_buffer(val) \
|
||
(current_top_target ()->set_circular_trace_buffer) (val)
|
||
|
||
#define target_set_trace_buffer_size(val) \
|
||
(current_top_target ()->set_trace_buffer_size) (val)
|
||
|
||
#define target_set_trace_notes(user,notes,stopnotes) \
|
||
(current_top_target ()->set_trace_notes) ((user), (notes), (stopnotes))
|
||
|
||
#define target_get_tib_address(ptid, addr) \
|
||
(current_top_target ()->get_tib_address) ((ptid), (addr))
|
||
|
||
#define target_set_permissions() \
|
||
(current_top_target ()->set_permissions) ()
|
||
|
||
#define target_static_tracepoint_marker_at(addr, marker) \
|
||
(current_top_target ()->static_tracepoint_marker_at) (addr, marker)
|
||
|
||
#define target_static_tracepoint_markers_by_strid(marker_id) \
|
||
(current_top_target ()->static_tracepoint_markers_by_strid) (marker_id)
|
||
|
||
#define target_traceframe_info() \
|
||
(current_top_target ()->traceframe_info) ()
|
||
|
||
#define target_use_agent(use) \
|
||
(current_top_target ()->use_agent) (use)
|
||
|
||
#define target_can_use_agent() \
|
||
(current_top_target ()->can_use_agent) ()
|
||
|
||
#define target_augmented_libraries_svr4_read() \
|
||
(current_top_target ()->augmented_libraries_svr4_read) ()
|
||
|
||
/* Command logging facility. */
|
||
|
||
#define target_log_command(p) \
|
||
(current_top_target ()->log_command) (p)
|
||
|
||
|
||
extern int target_core_of_thread (ptid_t ptid);
|
||
|
||
/* See to_get_unwinder in struct target_ops. */
|
||
extern const struct frame_unwind *target_get_unwinder (void);
|
||
|
||
/* See to_get_tailcall_unwinder in struct target_ops. */
|
||
extern const struct frame_unwind *target_get_tailcall_unwinder (void);
|
||
|
||
/* This implements basic memory verification, reading target memory
|
||
and performing the comparison here (as opposed to accelerated
|
||
verification making use of the qCRC packet, for example). */
|
||
|
||
extern int simple_verify_memory (struct target_ops* ops,
|
||
const gdb_byte *data,
|
||
CORE_ADDR memaddr, ULONGEST size);
|
||
|
||
/* Verify that the memory in the [MEMADDR, MEMADDR+SIZE) range matches
|
||
the contents of [DATA,DATA+SIZE). Returns 1 if there's a match, 0
|
||
if there's a mismatch, and -1 if an error is encountered while
|
||
reading memory. Throws an error if the functionality is found not
|
||
to be supported by the current target. */
|
||
int target_verify_memory (const gdb_byte *data,
|
||
CORE_ADDR memaddr, ULONGEST size);
|
||
|
||
/* Routines for maintenance of the target structures...
|
||
|
||
add_target: Add a target to the list of all possible targets.
|
||
This only makes sense for targets that should be activated using
|
||
the "target TARGET_NAME ..." command.
|
||
|
||
push_target: Make this target the top of the stack of currently used
|
||
targets, within its particular stratum of the stack. Result
|
||
is 0 if now atop the stack, nonzero if not on top (maybe
|
||
should warn user).
|
||
|
||
unpush_target: Remove this from the stack of currently used targets,
|
||
no matter where it is on the list. Returns 0 if no
|
||
change, 1 if removed from stack. */
|
||
|
||
/* Type of callback called when the user activates a target with
|
||
"target TARGET_NAME". The callback routine takes the rest of the
|
||
parameters from the command, and (if successful) pushes a new
|
||
target onto the stack. */
|
||
typedef void target_open_ftype (const char *args, int from_tty);
|
||
|
||
/* Add the target described by INFO to the list of possible targets
|
||
and add a new command 'target $(INFO->shortname)'. Set COMPLETER
|
||
as the command's completer if not NULL. */
|
||
|
||
extern void add_target (const target_info &info,
|
||
target_open_ftype *func,
|
||
completer_ftype *completer = NULL);
|
||
|
||
/* Adds a command ALIAS for the target described by INFO and marks it
|
||
deprecated. This is useful for maintaining backwards compatibility
|
||
when renaming targets. */
|
||
|
||
extern void add_deprecated_target_alias (const target_info &info,
|
||
const char *alias);
|
||
|
||
extern void push_target (struct target_ops *);
|
||
|
||
/* An overload that deletes the target on failure. */
|
||
extern void push_target (target_ops_up &&);
|
||
|
||
extern int unpush_target (struct target_ops *);
|
||
|
||
extern void target_pre_inferior (int);
|
||
|
||
extern void target_preopen (int);
|
||
|
||
/* Does whatever cleanup is required to get rid of all pushed targets. */
|
||
extern void pop_all_targets (void);
|
||
|
||
/* Like pop_all_targets, but pops only targets whose stratum is at or
|
||
above STRATUM. */
|
||
extern void pop_all_targets_at_and_above (enum strata stratum);
|
||
|
||
/* Like pop_all_targets, but pops only targets whose stratum is
|
||
strictly above ABOVE_STRATUM. */
|
||
extern void pop_all_targets_above (enum strata above_stratum);
|
||
|
||
extern int target_is_pushed (struct target_ops *t);
|
||
|
||
extern CORE_ADDR target_translate_tls_address (struct objfile *objfile,
|
||
CORE_ADDR offset);
|
||
|
||
/* Struct target_section maps address ranges to file sections. It is
|
||
mostly used with BFD files, but can be used without (e.g. for handling
|
||
raw disks, or files not in formats handled by BFD). */
|
||
|
||
struct target_section
|
||
{
|
||
CORE_ADDR addr; /* Lowest address in section */
|
||
CORE_ADDR endaddr; /* 1+highest address in section */
|
||
|
||
struct bfd_section *the_bfd_section;
|
||
|
||
/* The "owner" of the section.
|
||
It can be any unique value. It is set by add_target_sections
|
||
and used by remove_target_sections.
|
||
For example, for executables it is a pointer to exec_bfd and
|
||
for shlibs it is the so_list pointer. */
|
||
void *owner;
|
||
};
|
||
|
||
/* Holds an array of target sections. Defined by [SECTIONS..SECTIONS_END[. */
|
||
|
||
struct target_section_table
|
||
{
|
||
struct target_section *sections;
|
||
struct target_section *sections_end;
|
||
};
|
||
|
||
/* Return the "section" containing the specified address. */
|
||
struct target_section *target_section_by_addr (struct target_ops *target,
|
||
CORE_ADDR addr);
|
||
|
||
/* Return the target section table this target (or the targets
|
||
beneath) currently manipulate. */
|
||
|
||
extern struct target_section_table *target_get_section_table
|
||
(struct target_ops *target);
|
||
|
||
/* From mem-break.c */
|
||
|
||
extern int memory_remove_breakpoint (struct target_ops *,
|
||
struct gdbarch *, struct bp_target_info *,
|
||
enum remove_bp_reason);
|
||
|
||
extern int memory_insert_breakpoint (struct target_ops *,
|
||
struct gdbarch *, struct bp_target_info *);
|
||
|
||
/* Convenience template use to add memory breakpoints support to a
|
||
target. */
|
||
|
||
template <typename BaseTarget>
|
||
struct memory_breakpoint_target : public BaseTarget
|
||
{
|
||
int insert_breakpoint (struct gdbarch *gdbarch,
|
||
struct bp_target_info *bp_tgt) override
|
||
{ return memory_insert_breakpoint (this, gdbarch, bp_tgt); }
|
||
|
||
int remove_breakpoint (struct gdbarch *gdbarch,
|
||
struct bp_target_info *bp_tgt,
|
||
enum remove_bp_reason reason) override
|
||
{ return memory_remove_breakpoint (this, gdbarch, bp_tgt, reason); }
|
||
};
|
||
|
||
/* Check whether the memory at the breakpoint's placed address still
|
||
contains the expected breakpoint instruction. */
|
||
|
||
extern int memory_validate_breakpoint (struct gdbarch *gdbarch,
|
||
struct bp_target_info *bp_tgt);
|
||
|
||
extern int default_memory_remove_breakpoint (struct gdbarch *,
|
||
struct bp_target_info *);
|
||
|
||
extern int default_memory_insert_breakpoint (struct gdbarch *,
|
||
struct bp_target_info *);
|
||
|
||
|
||
/* From target.c */
|
||
|
||
extern void initialize_targets (void);
|
||
|
||
extern void noprocess (void) ATTRIBUTE_NORETURN;
|
||
|
||
extern void target_require_runnable (void);
|
||
|
||
/* Find the target at STRATUM. If no target is at that stratum,
|
||
return NULL. */
|
||
|
||
struct target_ops *find_target_at (enum strata stratum);
|
||
|
||
/* Read OS data object of type TYPE from the target, and return it in XML
|
||
format. The return value follows the same rules as target_read_stralloc. */
|
||
|
||
extern gdb::optional<gdb::char_vector> target_get_osdata (const char *type);
|
||
|
||
/* Stuff that should be shared among the various remote targets. */
|
||
|
||
/* Debugging level. 0 is off, and non-zero values mean to print some debug
|
||
information (higher values, more information). */
|
||
extern int remote_debug;
|
||
|
||
/* Speed in bits per second, or -1 which means don't mess with the speed. */
|
||
extern int baud_rate;
|
||
|
||
/* Parity for serial port */
|
||
extern int serial_parity;
|
||
|
||
/* Timeout limit for response from target. */
|
||
extern int remote_timeout;
|
||
|
||
|
||
|
||
/* Set the show memory breakpoints mode to show, and return a
|
||
scoped_restore to restore it back to the current value. */
|
||
extern scoped_restore_tmpl<int>
|
||
make_scoped_restore_show_memory_breakpoints (int show);
|
||
|
||
extern int may_write_registers;
|
||
extern int may_write_memory;
|
||
extern int may_insert_breakpoints;
|
||
extern int may_insert_tracepoints;
|
||
extern int may_insert_fast_tracepoints;
|
||
extern int may_stop;
|
||
|
||
extern void update_target_permissions (void);
|
||
|
||
|
||
/* Imported from machine dependent code. */
|
||
|
||
/* See to_enable_btrace in struct target_ops. */
|
||
extern struct btrace_target_info *
|
||
target_enable_btrace (ptid_t ptid, const struct btrace_config *);
|
||
|
||
/* See to_disable_btrace in struct target_ops. */
|
||
extern void target_disable_btrace (struct btrace_target_info *btinfo);
|
||
|
||
/* See to_teardown_btrace in struct target_ops. */
|
||
extern void target_teardown_btrace (struct btrace_target_info *btinfo);
|
||
|
||
/* See to_read_btrace in struct target_ops. */
|
||
extern enum btrace_error target_read_btrace (struct btrace_data *,
|
||
struct btrace_target_info *,
|
||
enum btrace_read_type);
|
||
|
||
/* See to_btrace_conf in struct target_ops. */
|
||
extern const struct btrace_config *
|
||
target_btrace_conf (const struct btrace_target_info *);
|
||
|
||
/* See to_stop_recording in struct target_ops. */
|
||
extern void target_stop_recording (void);
|
||
|
||
/* See to_save_record in struct target_ops. */
|
||
extern void target_save_record (const char *filename);
|
||
|
||
/* Query if the target supports deleting the execution log. */
|
||
extern int target_supports_delete_record (void);
|
||
|
||
/* See to_delete_record in struct target_ops. */
|
||
extern void target_delete_record (void);
|
||
|
||
/* See to_record_method. */
|
||
extern enum record_method target_record_method (ptid_t ptid);
|
||
|
||
/* See to_record_is_replaying in struct target_ops. */
|
||
extern int target_record_is_replaying (ptid_t ptid);
|
||
|
||
/* See to_record_will_replay in struct target_ops. */
|
||
extern int target_record_will_replay (ptid_t ptid, int dir);
|
||
|
||
/* See to_record_stop_replaying in struct target_ops. */
|
||
extern void target_record_stop_replaying (void);
|
||
|
||
/* See to_goto_record_begin in struct target_ops. */
|
||
extern void target_goto_record_begin (void);
|
||
|
||
/* See to_goto_record_end in struct target_ops. */
|
||
extern void target_goto_record_end (void);
|
||
|
||
/* See to_goto_record in struct target_ops. */
|
||
extern void target_goto_record (ULONGEST insn);
|
||
|
||
/* See to_insn_history. */
|
||
extern void target_insn_history (int size, gdb_disassembly_flags flags);
|
||
|
||
/* See to_insn_history_from. */
|
||
extern void target_insn_history_from (ULONGEST from, int size,
|
||
gdb_disassembly_flags flags);
|
||
|
||
/* See to_insn_history_range. */
|
||
extern void target_insn_history_range (ULONGEST begin, ULONGEST end,
|
||
gdb_disassembly_flags flags);
|
||
|
||
/* See to_call_history. */
|
||
extern void target_call_history (int size, record_print_flags flags);
|
||
|
||
/* See to_call_history_from. */
|
||
extern void target_call_history_from (ULONGEST begin, int size,
|
||
record_print_flags flags);
|
||
|
||
/* See to_call_history_range. */
|
||
extern void target_call_history_range (ULONGEST begin, ULONGEST end,
|
||
record_print_flags flags);
|
||
|
||
/* See to_prepare_to_generate_core. */
|
||
extern void target_prepare_to_generate_core (void);
|
||
|
||
/* See to_done_generating_core. */
|
||
extern void target_done_generating_core (void);
|
||
|
||
#endif /* !defined (TARGET_H) */
|