mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-06 00:34:26 +08:00
268a13a5a3
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
9185 lines
292 KiB
C
9185 lines
292 KiB
C
/* Target-struct-independent code to start (run) and stop an inferior
|
||
process.
|
||
|
||
Copyright (C) 1986-2019 Free Software Foundation, Inc.
|
||
|
||
This file is part of GDB.
|
||
|
||
This program is free software; you can redistribute it and/or modify
|
||
it under the terms of the GNU General Public License as published by
|
||
the Free Software Foundation; either version 3 of the License, or
|
||
(at your option) any later version.
|
||
|
||
This program is distributed in the hope that it will be useful,
|
||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
GNU General Public License for more details.
|
||
|
||
You should have received a copy of the GNU General Public License
|
||
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
||
|
||
#include "defs.h"
|
||
#include "infrun.h"
|
||
#include <ctype.h>
|
||
#include "symtab.h"
|
||
#include "frame.h"
|
||
#include "inferior.h"
|
||
#include "breakpoint.h"
|
||
#include "gdbsupport/gdb_wait.h"
|
||
#include "gdbcore.h"
|
||
#include "gdbcmd.h"
|
||
#include "cli/cli-script.h"
|
||
#include "target.h"
|
||
#include "gdbthread.h"
|
||
#include "annotate.h"
|
||
#include "symfile.h"
|
||
#include "top.h"
|
||
#include <signal.h>
|
||
#include "inf-loop.h"
|
||
#include "regcache.h"
|
||
#include "value.h"
|
||
#include "observable.h"
|
||
#include "language.h"
|
||
#include "solib.h"
|
||
#include "main.h"
|
||
#include "dictionary.h"
|
||
#include "block.h"
|
||
#include "mi/mi-common.h"
|
||
#include "event-top.h"
|
||
#include "record.h"
|
||
#include "record-full.h"
|
||
#include "inline-frame.h"
|
||
#include "jit.h"
|
||
#include "tracepoint.h"
|
||
#include "continuations.h"
|
||
#include "interps.h"
|
||
#include "skip.h"
|
||
#include "probe.h"
|
||
#include "objfiles.h"
|
||
#include "completer.h"
|
||
#include "target-descriptions.h"
|
||
#include "target-dcache.h"
|
||
#include "terminal.h"
|
||
#include "solist.h"
|
||
#include "event-loop.h"
|
||
#include "thread-fsm.h"
|
||
#include "gdbsupport/enum-flags.h"
|
||
#include "progspace-and-thread.h"
|
||
#include "gdbsupport/gdb_optional.h"
|
||
#include "arch-utils.h"
|
||
#include "gdbsupport/scope-exit.h"
|
||
#include "gdbsupport/forward-scope-exit.h"
|
||
|
||
/* Prototypes for local functions */
|
||
|
||
static void sig_print_info (enum gdb_signal);
|
||
|
||
static void sig_print_header (void);
|
||
|
||
static int follow_fork (void);
|
||
|
||
static int follow_fork_inferior (int follow_child, int detach_fork);
|
||
|
||
static void follow_inferior_reset_breakpoints (void);
|
||
|
||
static int currently_stepping (struct thread_info *tp);
|
||
|
||
void nullify_last_target_wait_ptid (void);
|
||
|
||
static void insert_hp_step_resume_breakpoint_at_frame (struct frame_info *);
|
||
|
||
static void insert_step_resume_breakpoint_at_caller (struct frame_info *);
|
||
|
||
static void insert_longjmp_resume_breakpoint (struct gdbarch *, CORE_ADDR);
|
||
|
||
static int maybe_software_singlestep (struct gdbarch *gdbarch, CORE_ADDR pc);
|
||
|
||
static void resume (gdb_signal sig);
|
||
|
||
/* Asynchronous signal handler registered as event loop source for
|
||
when we have pending events ready to be passed to the core. */
|
||
static struct async_event_handler *infrun_async_inferior_event_token;
|
||
|
||
/* Stores whether infrun_async was previously enabled or disabled.
|
||
Starts off as -1, indicating "never enabled/disabled". */
|
||
static int infrun_is_async = -1;
|
||
|
||
/* See infrun.h. */
|
||
|
||
void
|
||
infrun_async (int enable)
|
||
{
|
||
if (infrun_is_async != enable)
|
||
{
|
||
infrun_is_async = enable;
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: infrun_async(%d)\n",
|
||
enable);
|
||
|
||
if (enable)
|
||
mark_async_event_handler (infrun_async_inferior_event_token);
|
||
else
|
||
clear_async_event_handler (infrun_async_inferior_event_token);
|
||
}
|
||
}
|
||
|
||
/* See infrun.h. */
|
||
|
||
void
|
||
mark_infrun_async_event_handler (void)
|
||
{
|
||
mark_async_event_handler (infrun_async_inferior_event_token);
|
||
}
|
||
|
||
/* When set, stop the 'step' command if we enter a function which has
|
||
no line number information. The normal behavior is that we step
|
||
over such function. */
|
||
int step_stop_if_no_debug = 0;
|
||
static void
|
||
show_step_stop_if_no_debug (struct ui_file *file, int from_tty,
|
||
struct cmd_list_element *c, const char *value)
|
||
{
|
||
fprintf_filtered (file, _("Mode of the step operation is %s.\n"), value);
|
||
}
|
||
|
||
/* proceed and normal_stop use this to notify the user when the
|
||
inferior stopped in a different thread than it had been running
|
||
in. */
|
||
|
||
static ptid_t previous_inferior_ptid;
|
||
|
||
/* If set (default for legacy reasons), when following a fork, GDB
|
||
will detach from one of the fork branches, child or parent.
|
||
Exactly which branch is detached depends on 'set follow-fork-mode'
|
||
setting. */
|
||
|
||
static int detach_fork = 1;
|
||
|
||
int debug_displaced = 0;
|
||
static void
|
||
show_debug_displaced (struct ui_file *file, int from_tty,
|
||
struct cmd_list_element *c, const char *value)
|
||
{
|
||
fprintf_filtered (file, _("Displace stepping debugging is %s.\n"), value);
|
||
}
|
||
|
||
unsigned int debug_infrun = 0;
|
||
static void
|
||
show_debug_infrun (struct ui_file *file, int from_tty,
|
||
struct cmd_list_element *c, const char *value)
|
||
{
|
||
fprintf_filtered (file, _("Inferior debugging is %s.\n"), value);
|
||
}
|
||
|
||
|
||
/* Support for disabling address space randomization. */
|
||
|
||
int disable_randomization = 1;
|
||
|
||
static void
|
||
show_disable_randomization (struct ui_file *file, int from_tty,
|
||
struct cmd_list_element *c, const char *value)
|
||
{
|
||
if (target_supports_disable_randomization ())
|
||
fprintf_filtered (file,
|
||
_("Disabling randomization of debuggee's "
|
||
"virtual address space is %s.\n"),
|
||
value);
|
||
else
|
||
fputs_filtered (_("Disabling randomization of debuggee's "
|
||
"virtual address space is unsupported on\n"
|
||
"this platform.\n"), file);
|
||
}
|
||
|
||
static void
|
||
set_disable_randomization (const char *args, int from_tty,
|
||
struct cmd_list_element *c)
|
||
{
|
||
if (!target_supports_disable_randomization ())
|
||
error (_("Disabling randomization of debuggee's "
|
||
"virtual address space is unsupported on\n"
|
||
"this platform."));
|
||
}
|
||
|
||
/* User interface for non-stop mode. */
|
||
|
||
int non_stop = 0;
|
||
static int non_stop_1 = 0;
|
||
|
||
static void
|
||
set_non_stop (const char *args, int from_tty,
|
||
struct cmd_list_element *c)
|
||
{
|
||
if (target_has_execution)
|
||
{
|
||
non_stop_1 = non_stop;
|
||
error (_("Cannot change this setting while the inferior is running."));
|
||
}
|
||
|
||
non_stop = non_stop_1;
|
||
}
|
||
|
||
static void
|
||
show_non_stop (struct ui_file *file, int from_tty,
|
||
struct cmd_list_element *c, const char *value)
|
||
{
|
||
fprintf_filtered (file,
|
||
_("Controlling the inferior in non-stop mode is %s.\n"),
|
||
value);
|
||
}
|
||
|
||
/* "Observer mode" is somewhat like a more extreme version of
|
||
non-stop, in which all GDB operations that might affect the
|
||
target's execution have been disabled. */
|
||
|
||
int observer_mode = 0;
|
||
static int observer_mode_1 = 0;
|
||
|
||
static void
|
||
set_observer_mode (const char *args, int from_tty,
|
||
struct cmd_list_element *c)
|
||
{
|
||
if (target_has_execution)
|
||
{
|
||
observer_mode_1 = observer_mode;
|
||
error (_("Cannot change this setting while the inferior is running."));
|
||
}
|
||
|
||
observer_mode = observer_mode_1;
|
||
|
||
may_write_registers = !observer_mode;
|
||
may_write_memory = !observer_mode;
|
||
may_insert_breakpoints = !observer_mode;
|
||
may_insert_tracepoints = !observer_mode;
|
||
/* We can insert fast tracepoints in or out of observer mode,
|
||
but enable them if we're going into this mode. */
|
||
if (observer_mode)
|
||
may_insert_fast_tracepoints = 1;
|
||
may_stop = !observer_mode;
|
||
update_target_permissions ();
|
||
|
||
/* Going *into* observer mode we must force non-stop, then
|
||
going out we leave it that way. */
|
||
if (observer_mode)
|
||
{
|
||
pagination_enabled = 0;
|
||
non_stop = non_stop_1 = 1;
|
||
}
|
||
|
||
if (from_tty)
|
||
printf_filtered (_("Observer mode is now %s.\n"),
|
||
(observer_mode ? "on" : "off"));
|
||
}
|
||
|
||
static void
|
||
show_observer_mode (struct ui_file *file, int from_tty,
|
||
struct cmd_list_element *c, const char *value)
|
||
{
|
||
fprintf_filtered (file, _("Observer mode is %s.\n"), value);
|
||
}
|
||
|
||
/* This updates the value of observer mode based on changes in
|
||
permissions. Note that we are deliberately ignoring the values of
|
||
may-write-registers and may-write-memory, since the user may have
|
||
reason to enable these during a session, for instance to turn on a
|
||
debugging-related global. */
|
||
|
||
void
|
||
update_observer_mode (void)
|
||
{
|
||
int newval;
|
||
|
||
newval = (!may_insert_breakpoints
|
||
&& !may_insert_tracepoints
|
||
&& may_insert_fast_tracepoints
|
||
&& !may_stop
|
||
&& non_stop);
|
||
|
||
/* Let the user know if things change. */
|
||
if (newval != observer_mode)
|
||
printf_filtered (_("Observer mode is now %s.\n"),
|
||
(newval ? "on" : "off"));
|
||
|
||
observer_mode = observer_mode_1 = newval;
|
||
}
|
||
|
||
/* Tables of how to react to signals; the user sets them. */
|
||
|
||
static unsigned char signal_stop[GDB_SIGNAL_LAST];
|
||
static unsigned char signal_print[GDB_SIGNAL_LAST];
|
||
static unsigned char signal_program[GDB_SIGNAL_LAST];
|
||
|
||
/* Table of signals that are registered with "catch signal". A
|
||
non-zero entry indicates that the signal is caught by some "catch
|
||
signal" command. */
|
||
static unsigned char signal_catch[GDB_SIGNAL_LAST];
|
||
|
||
/* Table of signals that the target may silently handle.
|
||
This is automatically determined from the flags above,
|
||
and simply cached here. */
|
||
static unsigned char signal_pass[GDB_SIGNAL_LAST];
|
||
|
||
#define SET_SIGS(nsigs,sigs,flags) \
|
||
do { \
|
||
int signum = (nsigs); \
|
||
while (signum-- > 0) \
|
||
if ((sigs)[signum]) \
|
||
(flags)[signum] = 1; \
|
||
} while (0)
|
||
|
||
#define UNSET_SIGS(nsigs,sigs,flags) \
|
||
do { \
|
||
int signum = (nsigs); \
|
||
while (signum-- > 0) \
|
||
if ((sigs)[signum]) \
|
||
(flags)[signum] = 0; \
|
||
} while (0)
|
||
|
||
/* Update the target's copy of SIGNAL_PROGRAM. The sole purpose of
|
||
this function is to avoid exporting `signal_program'. */
|
||
|
||
void
|
||
update_signals_program_target (void)
|
||
{
|
||
target_program_signals (signal_program);
|
||
}
|
||
|
||
/* Value to pass to target_resume() to cause all threads to resume. */
|
||
|
||
#define RESUME_ALL minus_one_ptid
|
||
|
||
/* Command list pointer for the "stop" placeholder. */
|
||
|
||
static struct cmd_list_element *stop_command;
|
||
|
||
/* Nonzero if we want to give control to the user when we're notified
|
||
of shared library events by the dynamic linker. */
|
||
int stop_on_solib_events;
|
||
|
||
/* Enable or disable optional shared library event breakpoints
|
||
as appropriate when the above flag is changed. */
|
||
|
||
static void
|
||
set_stop_on_solib_events (const char *args,
|
||
int from_tty, struct cmd_list_element *c)
|
||
{
|
||
update_solib_breakpoints ();
|
||
}
|
||
|
||
static void
|
||
show_stop_on_solib_events (struct ui_file *file, int from_tty,
|
||
struct cmd_list_element *c, const char *value)
|
||
{
|
||
fprintf_filtered (file, _("Stopping for shared library events is %s.\n"),
|
||
value);
|
||
}
|
||
|
||
/* Nonzero after stop if current stack frame should be printed. */
|
||
|
||
static int stop_print_frame;
|
||
|
||
/* This is a cached copy of the pid/waitstatus of the last event
|
||
returned by target_wait()/deprecated_target_wait_hook(). This
|
||
information is returned by get_last_target_status(). */
|
||
static ptid_t target_last_wait_ptid;
|
||
static struct target_waitstatus target_last_waitstatus;
|
||
|
||
void init_thread_stepping_state (struct thread_info *tss);
|
||
|
||
static const char follow_fork_mode_child[] = "child";
|
||
static const char follow_fork_mode_parent[] = "parent";
|
||
|
||
static const char *const follow_fork_mode_kind_names[] = {
|
||
follow_fork_mode_child,
|
||
follow_fork_mode_parent,
|
||
NULL
|
||
};
|
||
|
||
static const char *follow_fork_mode_string = follow_fork_mode_parent;
|
||
static void
|
||
show_follow_fork_mode_string (struct ui_file *file, int from_tty,
|
||
struct cmd_list_element *c, const char *value)
|
||
{
|
||
fprintf_filtered (file,
|
||
_("Debugger response to a program "
|
||
"call of fork or vfork is \"%s\".\n"),
|
||
value);
|
||
}
|
||
|
||
|
||
/* Handle changes to the inferior list based on the type of fork,
|
||
which process is being followed, and whether the other process
|
||
should be detached. On entry inferior_ptid must be the ptid of
|
||
the fork parent. At return inferior_ptid is the ptid of the
|
||
followed inferior. */
|
||
|
||
static int
|
||
follow_fork_inferior (int follow_child, int detach_fork)
|
||
{
|
||
int has_vforked;
|
||
ptid_t parent_ptid, child_ptid;
|
||
|
||
has_vforked = (inferior_thread ()->pending_follow.kind
|
||
== TARGET_WAITKIND_VFORKED);
|
||
parent_ptid = inferior_ptid;
|
||
child_ptid = inferior_thread ()->pending_follow.value.related_pid;
|
||
|
||
if (has_vforked
|
||
&& !non_stop /* Non-stop always resumes both branches. */
|
||
&& current_ui->prompt_state == PROMPT_BLOCKED
|
||
&& !(follow_child || detach_fork || sched_multi))
|
||
{
|
||
/* The parent stays blocked inside the vfork syscall until the
|
||
child execs or exits. If we don't let the child run, then
|
||
the parent stays blocked. If we're telling the parent to run
|
||
in the foreground, the user will not be able to ctrl-c to get
|
||
back the terminal, effectively hanging the debug session. */
|
||
fprintf_filtered (gdb_stderr, _("\
|
||
Can not resume the parent process over vfork in the foreground while\n\
|
||
holding the child stopped. Try \"set detach-on-fork\" or \
|
||
\"set schedule-multiple\".\n"));
|
||
/* FIXME output string > 80 columns. */
|
||
return 1;
|
||
}
|
||
|
||
if (!follow_child)
|
||
{
|
||
/* Detach new forked process? */
|
||
if (detach_fork)
|
||
{
|
||
/* Before detaching from the child, remove all breakpoints
|
||
from it. If we forked, then this has already been taken
|
||
care of by infrun.c. If we vforked however, any
|
||
breakpoint inserted in the parent is visible in the
|
||
child, even those added while stopped in a vfork
|
||
catchpoint. This will remove the breakpoints from the
|
||
parent also, but they'll be reinserted below. */
|
||
if (has_vforked)
|
||
{
|
||
/* Keep breakpoints list in sync. */
|
||
remove_breakpoints_inf (current_inferior ());
|
||
}
|
||
|
||
if (print_inferior_events)
|
||
{
|
||
/* Ensure that we have a process ptid. */
|
||
ptid_t process_ptid = ptid_t (child_ptid.pid ());
|
||
|
||
target_terminal::ours_for_output ();
|
||
fprintf_filtered (gdb_stdlog,
|
||
_("[Detaching after %s from child %s]\n"),
|
||
has_vforked ? "vfork" : "fork",
|
||
target_pid_to_str (process_ptid).c_str ());
|
||
}
|
||
}
|
||
else
|
||
{
|
||
struct inferior *parent_inf, *child_inf;
|
||
|
||
/* Add process to GDB's tables. */
|
||
child_inf = add_inferior (child_ptid.pid ());
|
||
|
||
parent_inf = current_inferior ();
|
||
child_inf->attach_flag = parent_inf->attach_flag;
|
||
copy_terminal_info (child_inf, parent_inf);
|
||
child_inf->gdbarch = parent_inf->gdbarch;
|
||
copy_inferior_target_desc_info (child_inf, parent_inf);
|
||
|
||
scoped_restore_current_pspace_and_thread restore_pspace_thread;
|
||
|
||
inferior_ptid = child_ptid;
|
||
add_thread_silent (inferior_ptid);
|
||
set_current_inferior (child_inf);
|
||
child_inf->symfile_flags = SYMFILE_NO_READ;
|
||
|
||
/* If this is a vfork child, then the address-space is
|
||
shared with the parent. */
|
||
if (has_vforked)
|
||
{
|
||
child_inf->pspace = parent_inf->pspace;
|
||
child_inf->aspace = parent_inf->aspace;
|
||
|
||
/* The parent will be frozen until the child is done
|
||
with the shared region. Keep track of the
|
||
parent. */
|
||
child_inf->vfork_parent = parent_inf;
|
||
child_inf->pending_detach = 0;
|
||
parent_inf->vfork_child = child_inf;
|
||
parent_inf->pending_detach = 0;
|
||
}
|
||
else
|
||
{
|
||
child_inf->aspace = new_address_space ();
|
||
child_inf->pspace = new program_space (child_inf->aspace);
|
||
child_inf->removable = 1;
|
||
set_current_program_space (child_inf->pspace);
|
||
clone_program_space (child_inf->pspace, parent_inf->pspace);
|
||
|
||
/* Let the shared library layer (e.g., solib-svr4) learn
|
||
about this new process, relocate the cloned exec, pull
|
||
in shared libraries, and install the solib event
|
||
breakpoint. If a "cloned-VM" event was propagated
|
||
better throughout the core, this wouldn't be
|
||
required. */
|
||
solib_create_inferior_hook (0);
|
||
}
|
||
}
|
||
|
||
if (has_vforked)
|
||
{
|
||
struct inferior *parent_inf;
|
||
|
||
parent_inf = current_inferior ();
|
||
|
||
/* If we detached from the child, then we have to be careful
|
||
to not insert breakpoints in the parent until the child
|
||
is done with the shared memory region. However, if we're
|
||
staying attached to the child, then we can and should
|
||
insert breakpoints, so that we can debug it. A
|
||
subsequent child exec or exit is enough to know when does
|
||
the child stops using the parent's address space. */
|
||
parent_inf->waiting_for_vfork_done = detach_fork;
|
||
parent_inf->pspace->breakpoints_not_allowed = detach_fork;
|
||
}
|
||
}
|
||
else
|
||
{
|
||
/* Follow the child. */
|
||
struct inferior *parent_inf, *child_inf;
|
||
struct program_space *parent_pspace;
|
||
|
||
if (print_inferior_events)
|
||
{
|
||
std::string parent_pid = target_pid_to_str (parent_ptid);
|
||
std::string child_pid = target_pid_to_str (child_ptid);
|
||
|
||
target_terminal::ours_for_output ();
|
||
fprintf_filtered (gdb_stdlog,
|
||
_("[Attaching after %s %s to child %s]\n"),
|
||
parent_pid.c_str (),
|
||
has_vforked ? "vfork" : "fork",
|
||
child_pid.c_str ());
|
||
}
|
||
|
||
/* Add the new inferior first, so that the target_detach below
|
||
doesn't unpush the target. */
|
||
|
||
child_inf = add_inferior (child_ptid.pid ());
|
||
|
||
parent_inf = current_inferior ();
|
||
child_inf->attach_flag = parent_inf->attach_flag;
|
||
copy_terminal_info (child_inf, parent_inf);
|
||
child_inf->gdbarch = parent_inf->gdbarch;
|
||
copy_inferior_target_desc_info (child_inf, parent_inf);
|
||
|
||
parent_pspace = parent_inf->pspace;
|
||
|
||
/* If we're vforking, we want to hold on to the parent until the
|
||
child exits or execs. At child exec or exit time we can
|
||
remove the old breakpoints from the parent and detach or
|
||
resume debugging it. Otherwise, detach the parent now; we'll
|
||
want to reuse it's program/address spaces, but we can't set
|
||
them to the child before removing breakpoints from the
|
||
parent, otherwise, the breakpoints module could decide to
|
||
remove breakpoints from the wrong process (since they'd be
|
||
assigned to the same address space). */
|
||
|
||
if (has_vforked)
|
||
{
|
||
gdb_assert (child_inf->vfork_parent == NULL);
|
||
gdb_assert (parent_inf->vfork_child == NULL);
|
||
child_inf->vfork_parent = parent_inf;
|
||
child_inf->pending_detach = 0;
|
||
parent_inf->vfork_child = child_inf;
|
||
parent_inf->pending_detach = detach_fork;
|
||
parent_inf->waiting_for_vfork_done = 0;
|
||
}
|
||
else if (detach_fork)
|
||
{
|
||
if (print_inferior_events)
|
||
{
|
||
/* Ensure that we have a process ptid. */
|
||
ptid_t process_ptid = ptid_t (parent_ptid.pid ());
|
||
|
||
target_terminal::ours_for_output ();
|
||
fprintf_filtered (gdb_stdlog,
|
||
_("[Detaching after fork from "
|
||
"parent %s]\n"),
|
||
target_pid_to_str (process_ptid).c_str ());
|
||
}
|
||
|
||
target_detach (parent_inf, 0);
|
||
}
|
||
|
||
/* Note that the detach above makes PARENT_INF dangling. */
|
||
|
||
/* Add the child thread to the appropriate lists, and switch to
|
||
this new thread, before cloning the program space, and
|
||
informing the solib layer about this new process. */
|
||
|
||
inferior_ptid = child_ptid;
|
||
add_thread_silent (inferior_ptid);
|
||
set_current_inferior (child_inf);
|
||
|
||
/* If this is a vfork child, then the address-space is shared
|
||
with the parent. If we detached from the parent, then we can
|
||
reuse the parent's program/address spaces. */
|
||
if (has_vforked || detach_fork)
|
||
{
|
||
child_inf->pspace = parent_pspace;
|
||
child_inf->aspace = child_inf->pspace->aspace;
|
||
}
|
||
else
|
||
{
|
||
child_inf->aspace = new_address_space ();
|
||
child_inf->pspace = new program_space (child_inf->aspace);
|
||
child_inf->removable = 1;
|
||
child_inf->symfile_flags = SYMFILE_NO_READ;
|
||
set_current_program_space (child_inf->pspace);
|
||
clone_program_space (child_inf->pspace, parent_pspace);
|
||
|
||
/* Let the shared library layer (e.g., solib-svr4) learn
|
||
about this new process, relocate the cloned exec, pull in
|
||
shared libraries, and install the solib event breakpoint.
|
||
If a "cloned-VM" event was propagated better throughout
|
||
the core, this wouldn't be required. */
|
||
solib_create_inferior_hook (0);
|
||
}
|
||
}
|
||
|
||
return target_follow_fork (follow_child, detach_fork);
|
||
}
|
||
|
||
/* Tell the target to follow the fork we're stopped at. Returns true
|
||
if the inferior should be resumed; false, if the target for some
|
||
reason decided it's best not to resume. */
|
||
|
||
static int
|
||
follow_fork (void)
|
||
{
|
||
int follow_child = (follow_fork_mode_string == follow_fork_mode_child);
|
||
int should_resume = 1;
|
||
struct thread_info *tp;
|
||
|
||
/* Copy user stepping state to the new inferior thread. FIXME: the
|
||
followed fork child thread should have a copy of most of the
|
||
parent thread structure's run control related fields, not just these.
|
||
Initialized to avoid "may be used uninitialized" warnings from gcc. */
|
||
struct breakpoint *step_resume_breakpoint = NULL;
|
||
struct breakpoint *exception_resume_breakpoint = NULL;
|
||
CORE_ADDR step_range_start = 0;
|
||
CORE_ADDR step_range_end = 0;
|
||
struct frame_id step_frame_id = { 0 };
|
||
struct thread_fsm *thread_fsm = NULL;
|
||
|
||
if (!non_stop)
|
||
{
|
||
ptid_t wait_ptid;
|
||
struct target_waitstatus wait_status;
|
||
|
||
/* Get the last target status returned by target_wait(). */
|
||
get_last_target_status (&wait_ptid, &wait_status);
|
||
|
||
/* If not stopped at a fork event, then there's nothing else to
|
||
do. */
|
||
if (wait_status.kind != TARGET_WAITKIND_FORKED
|
||
&& wait_status.kind != TARGET_WAITKIND_VFORKED)
|
||
return 1;
|
||
|
||
/* Check if we switched over from WAIT_PTID, since the event was
|
||
reported. */
|
||
if (wait_ptid != minus_one_ptid
|
||
&& inferior_ptid != wait_ptid)
|
||
{
|
||
/* We did. Switch back to WAIT_PTID thread, to tell the
|
||
target to follow it (in either direction). We'll
|
||
afterwards refuse to resume, and inform the user what
|
||
happened. */
|
||
thread_info *wait_thread
|
||
= find_thread_ptid (wait_ptid);
|
||
switch_to_thread (wait_thread);
|
||
should_resume = 0;
|
||
}
|
||
}
|
||
|
||
tp = inferior_thread ();
|
||
|
||
/* If there were any forks/vforks that were caught and are now to be
|
||
followed, then do so now. */
|
||
switch (tp->pending_follow.kind)
|
||
{
|
||
case TARGET_WAITKIND_FORKED:
|
||
case TARGET_WAITKIND_VFORKED:
|
||
{
|
||
ptid_t parent, child;
|
||
|
||
/* If the user did a next/step, etc, over a fork call,
|
||
preserve the stepping state in the fork child. */
|
||
if (follow_child && should_resume)
|
||
{
|
||
step_resume_breakpoint = clone_momentary_breakpoint
|
||
(tp->control.step_resume_breakpoint);
|
||
step_range_start = tp->control.step_range_start;
|
||
step_range_end = tp->control.step_range_end;
|
||
step_frame_id = tp->control.step_frame_id;
|
||
exception_resume_breakpoint
|
||
= clone_momentary_breakpoint (tp->control.exception_resume_breakpoint);
|
||
thread_fsm = tp->thread_fsm;
|
||
|
||
/* For now, delete the parent's sr breakpoint, otherwise,
|
||
parent/child sr breakpoints are considered duplicates,
|
||
and the child version will not be installed. Remove
|
||
this when the breakpoints module becomes aware of
|
||
inferiors and address spaces. */
|
||
delete_step_resume_breakpoint (tp);
|
||
tp->control.step_range_start = 0;
|
||
tp->control.step_range_end = 0;
|
||
tp->control.step_frame_id = null_frame_id;
|
||
delete_exception_resume_breakpoint (tp);
|
||
tp->thread_fsm = NULL;
|
||
}
|
||
|
||
parent = inferior_ptid;
|
||
child = tp->pending_follow.value.related_pid;
|
||
|
||
/* Set up inferior(s) as specified by the caller, and tell the
|
||
target to do whatever is necessary to follow either parent
|
||
or child. */
|
||
if (follow_fork_inferior (follow_child, detach_fork))
|
||
{
|
||
/* Target refused to follow, or there's some other reason
|
||
we shouldn't resume. */
|
||
should_resume = 0;
|
||
}
|
||
else
|
||
{
|
||
/* This pending follow fork event is now handled, one way
|
||
or another. The previous selected thread may be gone
|
||
from the lists by now, but if it is still around, need
|
||
to clear the pending follow request. */
|
||
tp = find_thread_ptid (parent);
|
||
if (tp)
|
||
tp->pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
|
||
|
||
/* This makes sure we don't try to apply the "Switched
|
||
over from WAIT_PID" logic above. */
|
||
nullify_last_target_wait_ptid ();
|
||
|
||
/* If we followed the child, switch to it... */
|
||
if (follow_child)
|
||
{
|
||
thread_info *child_thr = find_thread_ptid (child);
|
||
switch_to_thread (child_thr);
|
||
|
||
/* ... and preserve the stepping state, in case the
|
||
user was stepping over the fork call. */
|
||
if (should_resume)
|
||
{
|
||
tp = inferior_thread ();
|
||
tp->control.step_resume_breakpoint
|
||
= step_resume_breakpoint;
|
||
tp->control.step_range_start = step_range_start;
|
||
tp->control.step_range_end = step_range_end;
|
||
tp->control.step_frame_id = step_frame_id;
|
||
tp->control.exception_resume_breakpoint
|
||
= exception_resume_breakpoint;
|
||
tp->thread_fsm = thread_fsm;
|
||
}
|
||
else
|
||
{
|
||
/* If we get here, it was because we're trying to
|
||
resume from a fork catchpoint, but, the user
|
||
has switched threads away from the thread that
|
||
forked. In that case, the resume command
|
||
issued is most likely not applicable to the
|
||
child, so just warn, and refuse to resume. */
|
||
warning (_("Not resuming: switched threads "
|
||
"before following fork child."));
|
||
}
|
||
|
||
/* Reset breakpoints in the child as appropriate. */
|
||
follow_inferior_reset_breakpoints ();
|
||
}
|
||
}
|
||
}
|
||
break;
|
||
case TARGET_WAITKIND_SPURIOUS:
|
||
/* Nothing to follow. */
|
||
break;
|
||
default:
|
||
internal_error (__FILE__, __LINE__,
|
||
"Unexpected pending_follow.kind %d\n",
|
||
tp->pending_follow.kind);
|
||
break;
|
||
}
|
||
|
||
return should_resume;
|
||
}
|
||
|
||
static void
|
||
follow_inferior_reset_breakpoints (void)
|
||
{
|
||
struct thread_info *tp = inferior_thread ();
|
||
|
||
/* Was there a step_resume breakpoint? (There was if the user
|
||
did a "next" at the fork() call.) If so, explicitly reset its
|
||
thread number. Cloned step_resume breakpoints are disabled on
|
||
creation, so enable it here now that it is associated with the
|
||
correct thread.
|
||
|
||
step_resumes are a form of bp that are made to be per-thread.
|
||
Since we created the step_resume bp when the parent process
|
||
was being debugged, and now are switching to the child process,
|
||
from the breakpoint package's viewpoint, that's a switch of
|
||
"threads". We must update the bp's notion of which thread
|
||
it is for, or it'll be ignored when it triggers. */
|
||
|
||
if (tp->control.step_resume_breakpoint)
|
||
{
|
||
breakpoint_re_set_thread (tp->control.step_resume_breakpoint);
|
||
tp->control.step_resume_breakpoint->loc->enabled = 1;
|
||
}
|
||
|
||
/* Treat exception_resume breakpoints like step_resume breakpoints. */
|
||
if (tp->control.exception_resume_breakpoint)
|
||
{
|
||
breakpoint_re_set_thread (tp->control.exception_resume_breakpoint);
|
||
tp->control.exception_resume_breakpoint->loc->enabled = 1;
|
||
}
|
||
|
||
/* Reinsert all breakpoints in the child. The user may have set
|
||
breakpoints after catching the fork, in which case those
|
||
were never set in the child, but only in the parent. This makes
|
||
sure the inserted breakpoints match the breakpoint list. */
|
||
|
||
breakpoint_re_set ();
|
||
insert_breakpoints ();
|
||
}
|
||
|
||
/* The child has exited or execed: resume threads of the parent the
|
||
user wanted to be executing. */
|
||
|
||
static int
|
||
proceed_after_vfork_done (struct thread_info *thread,
|
||
void *arg)
|
||
{
|
||
int pid = * (int *) arg;
|
||
|
||
if (thread->ptid.pid () == pid
|
||
&& thread->state == THREAD_RUNNING
|
||
&& !thread->executing
|
||
&& !thread->stop_requested
|
||
&& thread->suspend.stop_signal == GDB_SIGNAL_0)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: resuming vfork parent thread %s\n",
|
||
target_pid_to_str (thread->ptid).c_str ());
|
||
|
||
switch_to_thread (thread);
|
||
clear_proceed_status (0);
|
||
proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT);
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
/* Save/restore inferior_ptid, current program space and current
|
||
inferior. Only use this if the current context points at an exited
|
||
inferior (and therefore there's no current thread to save). */
|
||
class scoped_restore_exited_inferior
|
||
{
|
||
public:
|
||
scoped_restore_exited_inferior ()
|
||
: m_saved_ptid (&inferior_ptid)
|
||
{}
|
||
|
||
private:
|
||
scoped_restore_tmpl<ptid_t> m_saved_ptid;
|
||
scoped_restore_current_program_space m_pspace;
|
||
scoped_restore_current_inferior m_inferior;
|
||
};
|
||
|
||
/* Called whenever we notice an exec or exit event, to handle
|
||
detaching or resuming a vfork parent. */
|
||
|
||
static void
|
||
handle_vfork_child_exec_or_exit (int exec)
|
||
{
|
||
struct inferior *inf = current_inferior ();
|
||
|
||
if (inf->vfork_parent)
|
||
{
|
||
int resume_parent = -1;
|
||
|
||
/* This exec or exit marks the end of the shared memory region
|
||
between the parent and the child. Break the bonds. */
|
||
inferior *vfork_parent = inf->vfork_parent;
|
||
inf->vfork_parent->vfork_child = NULL;
|
||
inf->vfork_parent = NULL;
|
||
|
||
/* If the user wanted to detach from the parent, now is the
|
||
time. */
|
||
if (vfork_parent->pending_detach)
|
||
{
|
||
struct thread_info *tp;
|
||
struct program_space *pspace;
|
||
struct address_space *aspace;
|
||
|
||
/* follow-fork child, detach-on-fork on. */
|
||
|
||
vfork_parent->pending_detach = 0;
|
||
|
||
gdb::optional<scoped_restore_exited_inferior>
|
||
maybe_restore_inferior;
|
||
gdb::optional<scoped_restore_current_pspace_and_thread>
|
||
maybe_restore_thread;
|
||
|
||
/* If we're handling a child exit, then inferior_ptid points
|
||
at the inferior's pid, not to a thread. */
|
||
if (!exec)
|
||
maybe_restore_inferior.emplace ();
|
||
else
|
||
maybe_restore_thread.emplace ();
|
||
|
||
/* We're letting loose of the parent. */
|
||
tp = any_live_thread_of_inferior (vfork_parent);
|
||
switch_to_thread (tp);
|
||
|
||
/* We're about to detach from the parent, which implicitly
|
||
removes breakpoints from its address space. There's a
|
||
catch here: we want to reuse the spaces for the child,
|
||
but, parent/child are still sharing the pspace at this
|
||
point, although the exec in reality makes the kernel give
|
||
the child a fresh set of new pages. The problem here is
|
||
that the breakpoints module being unaware of this, would
|
||
likely chose the child process to write to the parent
|
||
address space. Swapping the child temporarily away from
|
||
the spaces has the desired effect. Yes, this is "sort
|
||
of" a hack. */
|
||
|
||
pspace = inf->pspace;
|
||
aspace = inf->aspace;
|
||
inf->aspace = NULL;
|
||
inf->pspace = NULL;
|
||
|
||
if (print_inferior_events)
|
||
{
|
||
std::string pidstr
|
||
= target_pid_to_str (ptid_t (vfork_parent->pid));
|
||
|
||
target_terminal::ours_for_output ();
|
||
|
||
if (exec)
|
||
{
|
||
fprintf_filtered (gdb_stdlog,
|
||
_("[Detaching vfork parent %s "
|
||
"after child exec]\n"), pidstr.c_str ());
|
||
}
|
||
else
|
||
{
|
||
fprintf_filtered (gdb_stdlog,
|
||
_("[Detaching vfork parent %s "
|
||
"after child exit]\n"), pidstr.c_str ());
|
||
}
|
||
}
|
||
|
||
target_detach (vfork_parent, 0);
|
||
|
||
/* Put it back. */
|
||
inf->pspace = pspace;
|
||
inf->aspace = aspace;
|
||
}
|
||
else if (exec)
|
||
{
|
||
/* We're staying attached to the parent, so, really give the
|
||
child a new address space. */
|
||
inf->pspace = new program_space (maybe_new_address_space ());
|
||
inf->aspace = inf->pspace->aspace;
|
||
inf->removable = 1;
|
||
set_current_program_space (inf->pspace);
|
||
|
||
resume_parent = vfork_parent->pid;
|
||
}
|
||
else
|
||
{
|
||
struct program_space *pspace;
|
||
|
||
/* If this is a vfork child exiting, then the pspace and
|
||
aspaces were shared with the parent. Since we're
|
||
reporting the process exit, we'll be mourning all that is
|
||
found in the address space, and switching to null_ptid,
|
||
preparing to start a new inferior. But, since we don't
|
||
want to clobber the parent's address/program spaces, we
|
||
go ahead and create a new one for this exiting
|
||
inferior. */
|
||
|
||
/* Switch to null_ptid while running clone_program_space, so
|
||
that clone_program_space doesn't want to read the
|
||
selected frame of a dead process. */
|
||
scoped_restore restore_ptid
|
||
= make_scoped_restore (&inferior_ptid, null_ptid);
|
||
|
||
/* This inferior is dead, so avoid giving the breakpoints
|
||
module the option to write through to it (cloning a
|
||
program space resets breakpoints). */
|
||
inf->aspace = NULL;
|
||
inf->pspace = NULL;
|
||
pspace = new program_space (maybe_new_address_space ());
|
||
set_current_program_space (pspace);
|
||
inf->removable = 1;
|
||
inf->symfile_flags = SYMFILE_NO_READ;
|
||
clone_program_space (pspace, vfork_parent->pspace);
|
||
inf->pspace = pspace;
|
||
inf->aspace = pspace->aspace;
|
||
|
||
resume_parent = vfork_parent->pid;
|
||
}
|
||
|
||
gdb_assert (current_program_space == inf->pspace);
|
||
|
||
if (non_stop && resume_parent != -1)
|
||
{
|
||
/* If the user wanted the parent to be running, let it go
|
||
free now. */
|
||
scoped_restore_current_thread restore_thread;
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: resuming vfork parent process %d\n",
|
||
resume_parent);
|
||
|
||
iterate_over_threads (proceed_after_vfork_done, &resume_parent);
|
||
}
|
||
}
|
||
}
|
||
|
||
/* Enum strings for "set|show follow-exec-mode". */
|
||
|
||
static const char follow_exec_mode_new[] = "new";
|
||
static const char follow_exec_mode_same[] = "same";
|
||
static const char *const follow_exec_mode_names[] =
|
||
{
|
||
follow_exec_mode_new,
|
||
follow_exec_mode_same,
|
||
NULL,
|
||
};
|
||
|
||
static const char *follow_exec_mode_string = follow_exec_mode_same;
|
||
static void
|
||
show_follow_exec_mode_string (struct ui_file *file, int from_tty,
|
||
struct cmd_list_element *c, const char *value)
|
||
{
|
||
fprintf_filtered (file, _("Follow exec mode is \"%s\".\n"), value);
|
||
}
|
||
|
||
/* EXEC_FILE_TARGET is assumed to be non-NULL. */
|
||
|
||
static void
|
||
follow_exec (ptid_t ptid, const char *exec_file_target)
|
||
{
|
||
struct inferior *inf = current_inferior ();
|
||
int pid = ptid.pid ();
|
||
ptid_t process_ptid;
|
||
|
||
/* Switch terminal for any messages produced e.g. by
|
||
breakpoint_re_set. */
|
||
target_terminal::ours_for_output ();
|
||
|
||
/* This is an exec event that we actually wish to pay attention to.
|
||
Refresh our symbol table to the newly exec'd program, remove any
|
||
momentary bp's, etc.
|
||
|
||
If there are breakpoints, they aren't really inserted now,
|
||
since the exec() transformed our inferior into a fresh set
|
||
of instructions.
|
||
|
||
We want to preserve symbolic breakpoints on the list, since
|
||
we have hopes that they can be reset after the new a.out's
|
||
symbol table is read.
|
||
|
||
However, any "raw" breakpoints must be removed from the list
|
||
(e.g., the solib bp's), since their address is probably invalid
|
||
now.
|
||
|
||
And, we DON'T want to call delete_breakpoints() here, since
|
||
that may write the bp's "shadow contents" (the instruction
|
||
value that was overwritten witha TRAP instruction). Since
|
||
we now have a new a.out, those shadow contents aren't valid. */
|
||
|
||
mark_breakpoints_out ();
|
||
|
||
/* The target reports the exec event to the main thread, even if
|
||
some other thread does the exec, and even if the main thread was
|
||
stopped or already gone. We may still have non-leader threads of
|
||
the process on our list. E.g., on targets that don't have thread
|
||
exit events (like remote); or on native Linux in non-stop mode if
|
||
there were only two threads in the inferior and the non-leader
|
||
one is the one that execs (and nothing forces an update of the
|
||
thread list up to here). When debugging remotely, it's best to
|
||
avoid extra traffic, when possible, so avoid syncing the thread
|
||
list with the target, and instead go ahead and delete all threads
|
||
of the process but one that reported the event. Note this must
|
||
be done before calling update_breakpoints_after_exec, as
|
||
otherwise clearing the threads' resources would reference stale
|
||
thread breakpoints -- it may have been one of these threads that
|
||
stepped across the exec. We could just clear their stepping
|
||
states, but as long as we're iterating, might as well delete
|
||
them. Deleting them now rather than at the next user-visible
|
||
stop provides a nicer sequence of events for user and MI
|
||
notifications. */
|
||
for (thread_info *th : all_threads_safe ())
|
||
if (th->ptid.pid () == pid && th->ptid != ptid)
|
||
delete_thread (th);
|
||
|
||
/* We also need to clear any left over stale state for the
|
||
leader/event thread. E.g., if there was any step-resume
|
||
breakpoint or similar, it's gone now. We cannot truly
|
||
step-to-next statement through an exec(). */
|
||
thread_info *th = inferior_thread ();
|
||
th->control.step_resume_breakpoint = NULL;
|
||
th->control.exception_resume_breakpoint = NULL;
|
||
th->control.single_step_breakpoints = NULL;
|
||
th->control.step_range_start = 0;
|
||
th->control.step_range_end = 0;
|
||
|
||
/* The user may have had the main thread held stopped in the
|
||
previous image (e.g., schedlock on, or non-stop). Release
|
||
it now. */
|
||
th->stop_requested = 0;
|
||
|
||
update_breakpoints_after_exec ();
|
||
|
||
/* What is this a.out's name? */
|
||
process_ptid = ptid_t (pid);
|
||
printf_unfiltered (_("%s is executing new program: %s\n"),
|
||
target_pid_to_str (process_ptid).c_str (),
|
||
exec_file_target);
|
||
|
||
/* We've followed the inferior through an exec. Therefore, the
|
||
inferior has essentially been killed & reborn. */
|
||
|
||
breakpoint_init_inferior (inf_execd);
|
||
|
||
gdb::unique_xmalloc_ptr<char> exec_file_host
|
||
= exec_file_find (exec_file_target, NULL);
|
||
|
||
/* If we were unable to map the executable target pathname onto a host
|
||
pathname, tell the user that. Otherwise GDB's subsequent behavior
|
||
is confusing. Maybe it would even be better to stop at this point
|
||
so that the user can specify a file manually before continuing. */
|
||
if (exec_file_host == NULL)
|
||
warning (_("Could not load symbols for executable %s.\n"
|
||
"Do you need \"set sysroot\"?"),
|
||
exec_file_target);
|
||
|
||
/* Reset the shared library package. This ensures that we get a
|
||
shlib event when the child reaches "_start", at which point the
|
||
dld will have had a chance to initialize the child. */
|
||
/* Also, loading a symbol file below may trigger symbol lookups, and
|
||
we don't want those to be satisfied by the libraries of the
|
||
previous incarnation of this process. */
|
||
no_shared_libraries (NULL, 0);
|
||
|
||
if (follow_exec_mode_string == follow_exec_mode_new)
|
||
{
|
||
/* The user wants to keep the old inferior and program spaces
|
||
around. Create a new fresh one, and switch to it. */
|
||
|
||
/* Do exit processing for the original inferior before setting the new
|
||
inferior's pid. Having two inferiors with the same pid would confuse
|
||
find_inferior_p(t)id. Transfer the terminal state and info from the
|
||
old to the new inferior. */
|
||
inf = add_inferior_with_spaces ();
|
||
swap_terminal_info (inf, current_inferior ());
|
||
exit_inferior_silent (current_inferior ());
|
||
|
||
inf->pid = pid;
|
||
target_follow_exec (inf, exec_file_target);
|
||
|
||
set_current_inferior (inf);
|
||
set_current_program_space (inf->pspace);
|
||
add_thread (ptid);
|
||
}
|
||
else
|
||
{
|
||
/* The old description may no longer be fit for the new image.
|
||
E.g, a 64-bit process exec'ed a 32-bit process. Clear the
|
||
old description; we'll read a new one below. No need to do
|
||
this on "follow-exec-mode new", as the old inferior stays
|
||
around (its description is later cleared/refetched on
|
||
restart). */
|
||
target_clear_description ();
|
||
}
|
||
|
||
gdb_assert (current_program_space == inf->pspace);
|
||
|
||
/* Attempt to open the exec file. SYMFILE_DEFER_BP_RESET is used
|
||
because the proper displacement for a PIE (Position Independent
|
||
Executable) main symbol file will only be computed by
|
||
solib_create_inferior_hook below. breakpoint_re_set would fail
|
||
to insert the breakpoints with the zero displacement. */
|
||
try_open_exec_file (exec_file_host.get (), inf, SYMFILE_DEFER_BP_RESET);
|
||
|
||
/* If the target can specify a description, read it. Must do this
|
||
after flipping to the new executable (because the target supplied
|
||
description must be compatible with the executable's
|
||
architecture, and the old executable may e.g., be 32-bit, while
|
||
the new one 64-bit), and before anything involving memory or
|
||
registers. */
|
||
target_find_description ();
|
||
|
||
solib_create_inferior_hook (0);
|
||
|
||
jit_inferior_created_hook ();
|
||
|
||
breakpoint_re_set ();
|
||
|
||
/* Reinsert all breakpoints. (Those which were symbolic have
|
||
been reset to the proper address in the new a.out, thanks
|
||
to symbol_file_command...). */
|
||
insert_breakpoints ();
|
||
|
||
/* The next resume of this inferior should bring it to the shlib
|
||
startup breakpoints. (If the user had also set bp's on
|
||
"main" from the old (parent) process, then they'll auto-
|
||
matically get reset there in the new process.). */
|
||
}
|
||
|
||
/* The queue of threads that need to do a step-over operation to get
|
||
past e.g., a breakpoint. What technique is used to step over the
|
||
breakpoint/watchpoint does not matter -- all threads end up in the
|
||
same queue, to maintain rough temporal order of execution, in order
|
||
to avoid starvation, otherwise, we could e.g., find ourselves
|
||
constantly stepping the same couple threads past their breakpoints
|
||
over and over, if the single-step finish fast enough. */
|
||
struct thread_info *step_over_queue_head;
|
||
|
||
/* Bit flags indicating what the thread needs to step over. */
|
||
|
||
enum step_over_what_flag
|
||
{
|
||
/* Step over a breakpoint. */
|
||
STEP_OVER_BREAKPOINT = 1,
|
||
|
||
/* Step past a non-continuable watchpoint, in order to let the
|
||
instruction execute so we can evaluate the watchpoint
|
||
expression. */
|
||
STEP_OVER_WATCHPOINT = 2
|
||
};
|
||
DEF_ENUM_FLAGS_TYPE (enum step_over_what_flag, step_over_what);
|
||
|
||
/* Info about an instruction that is being stepped over. */
|
||
|
||
struct step_over_info
|
||
{
|
||
/* If we're stepping past a breakpoint, this is the address space
|
||
and address of the instruction the breakpoint is set at. We'll
|
||
skip inserting all breakpoints here. Valid iff ASPACE is
|
||
non-NULL. */
|
||
const address_space *aspace;
|
||
CORE_ADDR address;
|
||
|
||
/* The instruction being stepped over triggers a nonsteppable
|
||
watchpoint. If true, we'll skip inserting watchpoints. */
|
||
int nonsteppable_watchpoint_p;
|
||
|
||
/* The thread's global number. */
|
||
int thread;
|
||
};
|
||
|
||
/* The step-over info of the location that is being stepped over.
|
||
|
||
Note that with async/breakpoint always-inserted mode, a user might
|
||
set a new breakpoint/watchpoint/etc. exactly while a breakpoint is
|
||
being stepped over. As setting a new breakpoint inserts all
|
||
breakpoints, we need to make sure the breakpoint being stepped over
|
||
isn't inserted then. We do that by only clearing the step-over
|
||
info when the step-over is actually finished (or aborted).
|
||
|
||
Presently GDB can only step over one breakpoint at any given time.
|
||
Given threads that can't run code in the same address space as the
|
||
breakpoint's can't really miss the breakpoint, GDB could be taught
|
||
to step-over at most one breakpoint per address space (so this info
|
||
could move to the address space object if/when GDB is extended).
|
||
The set of breakpoints being stepped over will normally be much
|
||
smaller than the set of all breakpoints, so a flag in the
|
||
breakpoint location structure would be wasteful. A separate list
|
||
also saves complexity and run-time, as otherwise we'd have to go
|
||
through all breakpoint locations clearing their flag whenever we
|
||
start a new sequence. Similar considerations weigh against storing
|
||
this info in the thread object. Plus, not all step overs actually
|
||
have breakpoint locations -- e.g., stepping past a single-step
|
||
breakpoint, or stepping to complete a non-continuable
|
||
watchpoint. */
|
||
static struct step_over_info step_over_info;
|
||
|
||
/* Record the address of the breakpoint/instruction we're currently
|
||
stepping over.
|
||
N.B. We record the aspace and address now, instead of say just the thread,
|
||
because when we need the info later the thread may be running. */
|
||
|
||
static void
|
||
set_step_over_info (const address_space *aspace, CORE_ADDR address,
|
||
int nonsteppable_watchpoint_p,
|
||
int thread)
|
||
{
|
||
step_over_info.aspace = aspace;
|
||
step_over_info.address = address;
|
||
step_over_info.nonsteppable_watchpoint_p = nonsteppable_watchpoint_p;
|
||
step_over_info.thread = thread;
|
||
}
|
||
|
||
/* Called when we're not longer stepping over a breakpoint / an
|
||
instruction, so all breakpoints are free to be (re)inserted. */
|
||
|
||
static void
|
||
clear_step_over_info (void)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: clear_step_over_info\n");
|
||
step_over_info.aspace = NULL;
|
||
step_over_info.address = 0;
|
||
step_over_info.nonsteppable_watchpoint_p = 0;
|
||
step_over_info.thread = -1;
|
||
}
|
||
|
||
/* See infrun.h. */
|
||
|
||
int
|
||
stepping_past_instruction_at (struct address_space *aspace,
|
||
CORE_ADDR address)
|
||
{
|
||
return (step_over_info.aspace != NULL
|
||
&& breakpoint_address_match (aspace, address,
|
||
step_over_info.aspace,
|
||
step_over_info.address));
|
||
}
|
||
|
||
/* See infrun.h. */
|
||
|
||
int
|
||
thread_is_stepping_over_breakpoint (int thread)
|
||
{
|
||
return (step_over_info.thread != -1
|
||
&& thread == step_over_info.thread);
|
||
}
|
||
|
||
/* See infrun.h. */
|
||
|
||
int
|
||
stepping_past_nonsteppable_watchpoint (void)
|
||
{
|
||
return step_over_info.nonsteppable_watchpoint_p;
|
||
}
|
||
|
||
/* Returns true if step-over info is valid. */
|
||
|
||
static int
|
||
step_over_info_valid_p (void)
|
||
{
|
||
return (step_over_info.aspace != NULL
|
||
|| stepping_past_nonsteppable_watchpoint ());
|
||
}
|
||
|
||
|
||
/* Displaced stepping. */
|
||
|
||
/* In non-stop debugging mode, we must take special care to manage
|
||
breakpoints properly; in particular, the traditional strategy for
|
||
stepping a thread past a breakpoint it has hit is unsuitable.
|
||
'Displaced stepping' is a tactic for stepping one thread past a
|
||
breakpoint it has hit while ensuring that other threads running
|
||
concurrently will hit the breakpoint as they should.
|
||
|
||
The traditional way to step a thread T off a breakpoint in a
|
||
multi-threaded program in all-stop mode is as follows:
|
||
|
||
a0) Initially, all threads are stopped, and breakpoints are not
|
||
inserted.
|
||
a1) We single-step T, leaving breakpoints uninserted.
|
||
a2) We insert breakpoints, and resume all threads.
|
||
|
||
In non-stop debugging, however, this strategy is unsuitable: we
|
||
don't want to have to stop all threads in the system in order to
|
||
continue or step T past a breakpoint. Instead, we use displaced
|
||
stepping:
|
||
|
||
n0) Initially, T is stopped, other threads are running, and
|
||
breakpoints are inserted.
|
||
n1) We copy the instruction "under" the breakpoint to a separate
|
||
location, outside the main code stream, making any adjustments
|
||
to the instruction, register, and memory state as directed by
|
||
T's architecture.
|
||
n2) We single-step T over the instruction at its new location.
|
||
n3) We adjust the resulting register and memory state as directed
|
||
by T's architecture. This includes resetting T's PC to point
|
||
back into the main instruction stream.
|
||
n4) We resume T.
|
||
|
||
This approach depends on the following gdbarch methods:
|
||
|
||
- gdbarch_max_insn_length and gdbarch_displaced_step_location
|
||
indicate where to copy the instruction, and how much space must
|
||
be reserved there. We use these in step n1.
|
||
|
||
- gdbarch_displaced_step_copy_insn copies a instruction to a new
|
||
address, and makes any necessary adjustments to the instruction,
|
||
register contents, and memory. We use this in step n1.
|
||
|
||
- gdbarch_displaced_step_fixup adjusts registers and memory after
|
||
we have successfuly single-stepped the instruction, to yield the
|
||
same effect the instruction would have had if we had executed it
|
||
at its original address. We use this in step n3.
|
||
|
||
The gdbarch_displaced_step_copy_insn and
|
||
gdbarch_displaced_step_fixup functions must be written so that
|
||
copying an instruction with gdbarch_displaced_step_copy_insn,
|
||
single-stepping across the copied instruction, and then applying
|
||
gdbarch_displaced_insn_fixup should have the same effects on the
|
||
thread's memory and registers as stepping the instruction in place
|
||
would have. Exactly which responsibilities fall to the copy and
|
||
which fall to the fixup is up to the author of those functions.
|
||
|
||
See the comments in gdbarch.sh for details.
|
||
|
||
Note that displaced stepping and software single-step cannot
|
||
currently be used in combination, although with some care I think
|
||
they could be made to. Software single-step works by placing
|
||
breakpoints on all possible subsequent instructions; if the
|
||
displaced instruction is a PC-relative jump, those breakpoints
|
||
could fall in very strange places --- on pages that aren't
|
||
executable, or at addresses that are not proper instruction
|
||
boundaries. (We do generally let other threads run while we wait
|
||
to hit the software single-step breakpoint, and they might
|
||
encounter such a corrupted instruction.) One way to work around
|
||
this would be to have gdbarch_displaced_step_copy_insn fully
|
||
simulate the effect of PC-relative instructions (and return NULL)
|
||
on architectures that use software single-stepping.
|
||
|
||
In non-stop mode, we can have independent and simultaneous step
|
||
requests, so more than one thread may need to simultaneously step
|
||
over a breakpoint. The current implementation assumes there is
|
||
only one scratch space per process. In this case, we have to
|
||
serialize access to the scratch space. If thread A wants to step
|
||
over a breakpoint, but we are currently waiting for some other
|
||
thread to complete a displaced step, we leave thread A stopped and
|
||
place it in the displaced_step_request_queue. Whenever a displaced
|
||
step finishes, we pick the next thread in the queue and start a new
|
||
displaced step operation on it. See displaced_step_prepare and
|
||
displaced_step_fixup for details. */
|
||
|
||
/* Default destructor for displaced_step_closure. */
|
||
|
||
displaced_step_closure::~displaced_step_closure () = default;
|
||
|
||
/* Get the displaced stepping state of process PID. */
|
||
|
||
static displaced_step_inferior_state *
|
||
get_displaced_stepping_state (inferior *inf)
|
||
{
|
||
return &inf->displaced_step_state;
|
||
}
|
||
|
||
/* Returns true if any inferior has a thread doing a displaced
|
||
step. */
|
||
|
||
static bool
|
||
displaced_step_in_progress_any_inferior ()
|
||
{
|
||
for (inferior *i : all_inferiors ())
|
||
{
|
||
if (i->displaced_step_state.step_thread != nullptr)
|
||
return true;
|
||
}
|
||
|
||
return false;
|
||
}
|
||
|
||
/* Return true if thread represented by PTID is doing a displaced
|
||
step. */
|
||
|
||
static int
|
||
displaced_step_in_progress_thread (thread_info *thread)
|
||
{
|
||
gdb_assert (thread != NULL);
|
||
|
||
return get_displaced_stepping_state (thread->inf)->step_thread == thread;
|
||
}
|
||
|
||
/* Return true if process PID has a thread doing a displaced step. */
|
||
|
||
static int
|
||
displaced_step_in_progress (inferior *inf)
|
||
{
|
||
return get_displaced_stepping_state (inf)->step_thread != nullptr;
|
||
}
|
||
|
||
/* If inferior is in displaced stepping, and ADDR equals to starting address
|
||
of copy area, return corresponding displaced_step_closure. Otherwise,
|
||
return NULL. */
|
||
|
||
struct displaced_step_closure*
|
||
get_displaced_step_closure_by_addr (CORE_ADDR addr)
|
||
{
|
||
displaced_step_inferior_state *displaced
|
||
= get_displaced_stepping_state (current_inferior ());
|
||
|
||
/* If checking the mode of displaced instruction in copy area. */
|
||
if (displaced->step_thread != nullptr
|
||
&& displaced->step_copy == addr)
|
||
return displaced->step_closure;
|
||
|
||
return NULL;
|
||
}
|
||
|
||
static void
|
||
infrun_inferior_exit (struct inferior *inf)
|
||
{
|
||
inf->displaced_step_state.reset ();
|
||
}
|
||
|
||
/* If ON, and the architecture supports it, GDB will use displaced
|
||
stepping to step over breakpoints. If OFF, or if the architecture
|
||
doesn't support it, GDB will instead use the traditional
|
||
hold-and-step approach. If AUTO (which is the default), GDB will
|
||
decide which technique to use to step over breakpoints depending on
|
||
which of all-stop or non-stop mode is active --- displaced stepping
|
||
in non-stop mode; hold-and-step in all-stop mode. */
|
||
|
||
static enum auto_boolean can_use_displaced_stepping = AUTO_BOOLEAN_AUTO;
|
||
|
||
static void
|
||
show_can_use_displaced_stepping (struct ui_file *file, int from_tty,
|
||
struct cmd_list_element *c,
|
||
const char *value)
|
||
{
|
||
if (can_use_displaced_stepping == AUTO_BOOLEAN_AUTO)
|
||
fprintf_filtered (file,
|
||
_("Debugger's willingness to use displaced stepping "
|
||
"to step over breakpoints is %s (currently %s).\n"),
|
||
value, target_is_non_stop_p () ? "on" : "off");
|
||
else
|
||
fprintf_filtered (file,
|
||
_("Debugger's willingness to use displaced stepping "
|
||
"to step over breakpoints is %s.\n"), value);
|
||
}
|
||
|
||
/* Return non-zero if displaced stepping can/should be used to step
|
||
over breakpoints of thread TP. */
|
||
|
||
static int
|
||
use_displaced_stepping (struct thread_info *tp)
|
||
{
|
||
struct regcache *regcache = get_thread_regcache (tp);
|
||
struct gdbarch *gdbarch = regcache->arch ();
|
||
displaced_step_inferior_state *displaced_state
|
||
= get_displaced_stepping_state (tp->inf);
|
||
|
||
return (((can_use_displaced_stepping == AUTO_BOOLEAN_AUTO
|
||
&& target_is_non_stop_p ())
|
||
|| can_use_displaced_stepping == AUTO_BOOLEAN_TRUE)
|
||
&& gdbarch_displaced_step_copy_insn_p (gdbarch)
|
||
&& find_record_target () == NULL
|
||
&& !displaced_state->failed_before);
|
||
}
|
||
|
||
/* Clean out any stray displaced stepping state. */
|
||
static void
|
||
displaced_step_clear (struct displaced_step_inferior_state *displaced)
|
||
{
|
||
/* Indicate that there is no cleanup pending. */
|
||
displaced->step_thread = nullptr;
|
||
|
||
delete displaced->step_closure;
|
||
displaced->step_closure = NULL;
|
||
}
|
||
|
||
/* A cleanup that wraps displaced_step_clear. */
|
||
using displaced_step_clear_cleanup
|
||
= FORWARD_SCOPE_EXIT (displaced_step_clear);
|
||
|
||
/* Dump LEN bytes at BUF in hex to FILE, followed by a newline. */
|
||
void
|
||
displaced_step_dump_bytes (struct ui_file *file,
|
||
const gdb_byte *buf,
|
||
size_t len)
|
||
{
|
||
int i;
|
||
|
||
for (i = 0; i < len; i++)
|
||
fprintf_unfiltered (file, "%02x ", buf[i]);
|
||
fputs_unfiltered ("\n", file);
|
||
}
|
||
|
||
/* Prepare to single-step, using displaced stepping.
|
||
|
||
Note that we cannot use displaced stepping when we have a signal to
|
||
deliver. If we have a signal to deliver and an instruction to step
|
||
over, then after the step, there will be no indication from the
|
||
target whether the thread entered a signal handler or ignored the
|
||
signal and stepped over the instruction successfully --- both cases
|
||
result in a simple SIGTRAP. In the first case we mustn't do a
|
||
fixup, and in the second case we must --- but we can't tell which.
|
||
Comments in the code for 'random signals' in handle_inferior_event
|
||
explain how we handle this case instead.
|
||
|
||
Returns 1 if preparing was successful -- this thread is going to be
|
||
stepped now; 0 if displaced stepping this thread got queued; or -1
|
||
if this instruction can't be displaced stepped. */
|
||
|
||
static int
|
||
displaced_step_prepare_throw (thread_info *tp)
|
||
{
|
||
regcache *regcache = get_thread_regcache (tp);
|
||
struct gdbarch *gdbarch = regcache->arch ();
|
||
const address_space *aspace = regcache->aspace ();
|
||
CORE_ADDR original, copy;
|
||
ULONGEST len;
|
||
struct displaced_step_closure *closure;
|
||
int status;
|
||
|
||
/* We should never reach this function if the architecture does not
|
||
support displaced stepping. */
|
||
gdb_assert (gdbarch_displaced_step_copy_insn_p (gdbarch));
|
||
|
||
/* Nor if the thread isn't meant to step over a breakpoint. */
|
||
gdb_assert (tp->control.trap_expected);
|
||
|
||
/* Disable range stepping while executing in the scratch pad. We
|
||
want a single-step even if executing the displaced instruction in
|
||
the scratch buffer lands within the stepping range (e.g., a
|
||
jump/branch). */
|
||
tp->control.may_range_step = 0;
|
||
|
||
/* We have to displaced step one thread at a time, as we only have
|
||
access to a single scratch space per inferior. */
|
||
|
||
displaced_step_inferior_state *displaced
|
||
= get_displaced_stepping_state (tp->inf);
|
||
|
||
if (displaced->step_thread != nullptr)
|
||
{
|
||
/* Already waiting for a displaced step to finish. Defer this
|
||
request and place in queue. */
|
||
|
||
if (debug_displaced)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"displaced: deferring step of %s\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
|
||
thread_step_over_chain_enqueue (tp);
|
||
return 0;
|
||
}
|
||
else
|
||
{
|
||
if (debug_displaced)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"displaced: stepping %s now\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
}
|
||
|
||
displaced_step_clear (displaced);
|
||
|
||
scoped_restore_current_thread restore_thread;
|
||
|
||
switch_to_thread (tp);
|
||
|
||
original = regcache_read_pc (regcache);
|
||
|
||
copy = gdbarch_displaced_step_location (gdbarch);
|
||
len = gdbarch_max_insn_length (gdbarch);
|
||
|
||
if (breakpoint_in_range_p (aspace, copy, len))
|
||
{
|
||
/* There's a breakpoint set in the scratch pad location range
|
||
(which is usually around the entry point). We'd either
|
||
install it before resuming, which would overwrite/corrupt the
|
||
scratch pad, or if it was already inserted, this displaced
|
||
step would overwrite it. The latter is OK in the sense that
|
||
we already assume that no thread is going to execute the code
|
||
in the scratch pad range (after initial startup) anyway, but
|
||
the former is unacceptable. Simply punt and fallback to
|
||
stepping over this breakpoint in-line. */
|
||
if (debug_displaced)
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"displaced: breakpoint set in scratch pad. "
|
||
"Stepping over breakpoint in-line instead.\n");
|
||
}
|
||
|
||
return -1;
|
||
}
|
||
|
||
/* Save the original contents of the copy area. */
|
||
displaced->step_saved_copy.resize (len);
|
||
status = target_read_memory (copy, displaced->step_saved_copy.data (), len);
|
||
if (status != 0)
|
||
throw_error (MEMORY_ERROR,
|
||
_("Error accessing memory address %s (%s) for "
|
||
"displaced-stepping scratch space."),
|
||
paddress (gdbarch, copy), safe_strerror (status));
|
||
if (debug_displaced)
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog, "displaced: saved %s: ",
|
||
paddress (gdbarch, copy));
|
||
displaced_step_dump_bytes (gdb_stdlog,
|
||
displaced->step_saved_copy.data (),
|
||
len);
|
||
};
|
||
|
||
closure = gdbarch_displaced_step_copy_insn (gdbarch,
|
||
original, copy, regcache);
|
||
if (closure == NULL)
|
||
{
|
||
/* The architecture doesn't know how or want to displaced step
|
||
this instruction or instruction sequence. Fallback to
|
||
stepping over the breakpoint in-line. */
|
||
return -1;
|
||
}
|
||
|
||
/* Save the information we need to fix things up if the step
|
||
succeeds. */
|
||
displaced->step_thread = tp;
|
||
displaced->step_gdbarch = gdbarch;
|
||
displaced->step_closure = closure;
|
||
displaced->step_original = original;
|
||
displaced->step_copy = copy;
|
||
|
||
{
|
||
displaced_step_clear_cleanup cleanup (displaced);
|
||
|
||
/* Resume execution at the copy. */
|
||
regcache_write_pc (regcache, copy);
|
||
|
||
cleanup.release ();
|
||
}
|
||
|
||
if (debug_displaced)
|
||
fprintf_unfiltered (gdb_stdlog, "displaced: displaced pc to %s\n",
|
||
paddress (gdbarch, copy));
|
||
|
||
return 1;
|
||
}
|
||
|
||
/* Wrapper for displaced_step_prepare_throw that disabled further
|
||
attempts at displaced stepping if we get a memory error. */
|
||
|
||
static int
|
||
displaced_step_prepare (thread_info *thread)
|
||
{
|
||
int prepared = -1;
|
||
|
||
try
|
||
{
|
||
prepared = displaced_step_prepare_throw (thread);
|
||
}
|
||
catch (const gdb_exception_error &ex)
|
||
{
|
||
struct displaced_step_inferior_state *displaced_state;
|
||
|
||
if (ex.error != MEMORY_ERROR
|
||
&& ex.error != NOT_SUPPORTED_ERROR)
|
||
throw;
|
||
|
||
if (debug_infrun)
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: disabling displaced stepping: %s\n",
|
||
ex.what ());
|
||
}
|
||
|
||
/* Be verbose if "set displaced-stepping" is "on", silent if
|
||
"auto". */
|
||
if (can_use_displaced_stepping == AUTO_BOOLEAN_TRUE)
|
||
{
|
||
warning (_("disabling displaced stepping: %s"),
|
||
ex.what ());
|
||
}
|
||
|
||
/* Disable further displaced stepping attempts. */
|
||
displaced_state
|
||
= get_displaced_stepping_state (thread->inf);
|
||
displaced_state->failed_before = 1;
|
||
}
|
||
|
||
return prepared;
|
||
}
|
||
|
||
static void
|
||
write_memory_ptid (ptid_t ptid, CORE_ADDR memaddr,
|
||
const gdb_byte *myaddr, int len)
|
||
{
|
||
scoped_restore save_inferior_ptid = make_scoped_restore (&inferior_ptid);
|
||
|
||
inferior_ptid = ptid;
|
||
write_memory (memaddr, myaddr, len);
|
||
}
|
||
|
||
/* Restore the contents of the copy area for thread PTID. */
|
||
|
||
static void
|
||
displaced_step_restore (struct displaced_step_inferior_state *displaced,
|
||
ptid_t ptid)
|
||
{
|
||
ULONGEST len = gdbarch_max_insn_length (displaced->step_gdbarch);
|
||
|
||
write_memory_ptid (ptid, displaced->step_copy,
|
||
displaced->step_saved_copy.data (), len);
|
||
if (debug_displaced)
|
||
fprintf_unfiltered (gdb_stdlog, "displaced: restored %s %s\n",
|
||
target_pid_to_str (ptid).c_str (),
|
||
paddress (displaced->step_gdbarch,
|
||
displaced->step_copy));
|
||
}
|
||
|
||
/* If we displaced stepped an instruction successfully, adjust
|
||
registers and memory to yield the same effect the instruction would
|
||
have had if we had executed it at its original address, and return
|
||
1. If the instruction didn't complete, relocate the PC and return
|
||
-1. If the thread wasn't displaced stepping, return 0. */
|
||
|
||
static int
|
||
displaced_step_fixup (thread_info *event_thread, enum gdb_signal signal)
|
||
{
|
||
struct displaced_step_inferior_state *displaced
|
||
= get_displaced_stepping_state (event_thread->inf);
|
||
int ret;
|
||
|
||
/* Was this event for the thread we displaced? */
|
||
if (displaced->step_thread != event_thread)
|
||
return 0;
|
||
|
||
displaced_step_clear_cleanup cleanup (displaced);
|
||
|
||
displaced_step_restore (displaced, displaced->step_thread->ptid);
|
||
|
||
/* Fixup may need to read memory/registers. Switch to the thread
|
||
that we're fixing up. Also, target_stopped_by_watchpoint checks
|
||
the current thread. */
|
||
switch_to_thread (event_thread);
|
||
|
||
/* Did the instruction complete successfully? */
|
||
if (signal == GDB_SIGNAL_TRAP
|
||
&& !(target_stopped_by_watchpoint ()
|
||
&& (gdbarch_have_nonsteppable_watchpoint (displaced->step_gdbarch)
|
||
|| target_have_steppable_watchpoint)))
|
||
{
|
||
/* Fix up the resulting state. */
|
||
gdbarch_displaced_step_fixup (displaced->step_gdbarch,
|
||
displaced->step_closure,
|
||
displaced->step_original,
|
||
displaced->step_copy,
|
||
get_thread_regcache (displaced->step_thread));
|
||
ret = 1;
|
||
}
|
||
else
|
||
{
|
||
/* Since the instruction didn't complete, all we can do is
|
||
relocate the PC. */
|
||
struct regcache *regcache = get_thread_regcache (event_thread);
|
||
CORE_ADDR pc = regcache_read_pc (regcache);
|
||
|
||
pc = displaced->step_original + (pc - displaced->step_copy);
|
||
regcache_write_pc (regcache, pc);
|
||
ret = -1;
|
||
}
|
||
|
||
return ret;
|
||
}
|
||
|
||
/* Data to be passed around while handling an event. This data is
|
||
discarded between events. */
|
||
struct execution_control_state
|
||
{
|
||
ptid_t ptid;
|
||
/* The thread that got the event, if this was a thread event; NULL
|
||
otherwise. */
|
||
struct thread_info *event_thread;
|
||
|
||
struct target_waitstatus ws;
|
||
int stop_func_filled_in;
|
||
CORE_ADDR stop_func_start;
|
||
CORE_ADDR stop_func_end;
|
||
const char *stop_func_name;
|
||
int wait_some_more;
|
||
|
||
/* True if the event thread hit the single-step breakpoint of
|
||
another thread. Thus the event doesn't cause a stop, the thread
|
||
needs to be single-stepped past the single-step breakpoint before
|
||
we can switch back to the original stepping thread. */
|
||
int hit_singlestep_breakpoint;
|
||
};
|
||
|
||
/* Clear ECS and set it to point at TP. */
|
||
|
||
static void
|
||
reset_ecs (struct execution_control_state *ecs, struct thread_info *tp)
|
||
{
|
||
memset (ecs, 0, sizeof (*ecs));
|
||
ecs->event_thread = tp;
|
||
ecs->ptid = tp->ptid;
|
||
}
|
||
|
||
static void keep_going_pass_signal (struct execution_control_state *ecs);
|
||
static void prepare_to_wait (struct execution_control_state *ecs);
|
||
static int keep_going_stepped_thread (struct thread_info *tp);
|
||
static step_over_what thread_still_needs_step_over (struct thread_info *tp);
|
||
|
||
/* Are there any pending step-over requests? If so, run all we can
|
||
now and return true. Otherwise, return false. */
|
||
|
||
static int
|
||
start_step_over (void)
|
||
{
|
||
struct thread_info *tp, *next;
|
||
|
||
/* Don't start a new step-over if we already have an in-line
|
||
step-over operation ongoing. */
|
||
if (step_over_info_valid_p ())
|
||
return 0;
|
||
|
||
for (tp = step_over_queue_head; tp != NULL; tp = next)
|
||
{
|
||
struct execution_control_state ecss;
|
||
struct execution_control_state *ecs = &ecss;
|
||
step_over_what step_what;
|
||
int must_be_in_line;
|
||
|
||
gdb_assert (!tp->stop_requested);
|
||
|
||
next = thread_step_over_chain_next (tp);
|
||
|
||
/* If this inferior already has a displaced step in process,
|
||
don't start a new one. */
|
||
if (displaced_step_in_progress (tp->inf))
|
||
continue;
|
||
|
||
step_what = thread_still_needs_step_over (tp);
|
||
must_be_in_line = ((step_what & STEP_OVER_WATCHPOINT)
|
||
|| ((step_what & STEP_OVER_BREAKPOINT)
|
||
&& !use_displaced_stepping (tp)));
|
||
|
||
/* We currently stop all threads of all processes to step-over
|
||
in-line. If we need to start a new in-line step-over, let
|
||
any pending displaced steps finish first. */
|
||
if (must_be_in_line && displaced_step_in_progress_any_inferior ())
|
||
return 0;
|
||
|
||
thread_step_over_chain_remove (tp);
|
||
|
||
if (step_over_queue_head == NULL)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: step-over queue now empty\n");
|
||
}
|
||
|
||
if (tp->control.trap_expected
|
||
|| tp->resumed
|
||
|| tp->executing)
|
||
{
|
||
internal_error (__FILE__, __LINE__,
|
||
"[%s] has inconsistent state: "
|
||
"trap_expected=%d, resumed=%d, executing=%d\n",
|
||
target_pid_to_str (tp->ptid).c_str (),
|
||
tp->control.trap_expected,
|
||
tp->resumed,
|
||
tp->executing);
|
||
}
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: resuming [%s] for step-over\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
|
||
/* keep_going_pass_signal skips the step-over if the breakpoint
|
||
is no longer inserted. In all-stop, we want to keep looking
|
||
for a thread that needs a step-over instead of resuming TP,
|
||
because we wouldn't be able to resume anything else until the
|
||
target stops again. In non-stop, the resume always resumes
|
||
only TP, so it's OK to let the thread resume freely. */
|
||
if (!target_is_non_stop_p () && !step_what)
|
||
continue;
|
||
|
||
switch_to_thread (tp);
|
||
reset_ecs (ecs, tp);
|
||
keep_going_pass_signal (ecs);
|
||
|
||
if (!ecs->wait_some_more)
|
||
error (_("Command aborted."));
|
||
|
||
gdb_assert (tp->resumed);
|
||
|
||
/* If we started a new in-line step-over, we're done. */
|
||
if (step_over_info_valid_p ())
|
||
{
|
||
gdb_assert (tp->control.trap_expected);
|
||
return 1;
|
||
}
|
||
|
||
if (!target_is_non_stop_p ())
|
||
{
|
||
/* On all-stop, shouldn't have resumed unless we needed a
|
||
step over. */
|
||
gdb_assert (tp->control.trap_expected
|
||
|| tp->step_after_step_resume_breakpoint);
|
||
|
||
/* With remote targets (at least), in all-stop, we can't
|
||
issue any further remote commands until the program stops
|
||
again. */
|
||
return 1;
|
||
}
|
||
|
||
/* Either the thread no longer needed a step-over, or a new
|
||
displaced stepping sequence started. Even in the latter
|
||
case, continue looking. Maybe we can also start another
|
||
displaced step on a thread of other process. */
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
/* Update global variables holding ptids to hold NEW_PTID if they were
|
||
holding OLD_PTID. */
|
||
static void
|
||
infrun_thread_ptid_changed (ptid_t old_ptid, ptid_t new_ptid)
|
||
{
|
||
if (inferior_ptid == old_ptid)
|
||
inferior_ptid = new_ptid;
|
||
}
|
||
|
||
|
||
|
||
static const char schedlock_off[] = "off";
|
||
static const char schedlock_on[] = "on";
|
||
static const char schedlock_step[] = "step";
|
||
static const char schedlock_replay[] = "replay";
|
||
static const char *const scheduler_enums[] = {
|
||
schedlock_off,
|
||
schedlock_on,
|
||
schedlock_step,
|
||
schedlock_replay,
|
||
NULL
|
||
};
|
||
static const char *scheduler_mode = schedlock_replay;
|
||
static void
|
||
show_scheduler_mode (struct ui_file *file, int from_tty,
|
||
struct cmd_list_element *c, const char *value)
|
||
{
|
||
fprintf_filtered (file,
|
||
_("Mode for locking scheduler "
|
||
"during execution is \"%s\".\n"),
|
||
value);
|
||
}
|
||
|
||
static void
|
||
set_schedlock_func (const char *args, int from_tty, struct cmd_list_element *c)
|
||
{
|
||
if (!target_can_lock_scheduler)
|
||
{
|
||
scheduler_mode = schedlock_off;
|
||
error (_("Target '%s' cannot support this command."), target_shortname);
|
||
}
|
||
}
|
||
|
||
/* True if execution commands resume all threads of all processes by
|
||
default; otherwise, resume only threads of the current inferior
|
||
process. */
|
||
int sched_multi = 0;
|
||
|
||
/* Try to setup for software single stepping over the specified location.
|
||
Return 1 if target_resume() should use hardware single step.
|
||
|
||
GDBARCH the current gdbarch.
|
||
PC the location to step over. */
|
||
|
||
static int
|
||
maybe_software_singlestep (struct gdbarch *gdbarch, CORE_ADDR pc)
|
||
{
|
||
int hw_step = 1;
|
||
|
||
if (execution_direction == EXEC_FORWARD
|
||
&& gdbarch_software_single_step_p (gdbarch))
|
||
hw_step = !insert_single_step_breakpoints (gdbarch);
|
||
|
||
return hw_step;
|
||
}
|
||
|
||
/* See infrun.h. */
|
||
|
||
ptid_t
|
||
user_visible_resume_ptid (int step)
|
||
{
|
||
ptid_t resume_ptid;
|
||
|
||
if (non_stop)
|
||
{
|
||
/* With non-stop mode on, threads are always handled
|
||
individually. */
|
||
resume_ptid = inferior_ptid;
|
||
}
|
||
else if ((scheduler_mode == schedlock_on)
|
||
|| (scheduler_mode == schedlock_step && step))
|
||
{
|
||
/* User-settable 'scheduler' mode requires solo thread
|
||
resume. */
|
||
resume_ptid = inferior_ptid;
|
||
}
|
||
else if ((scheduler_mode == schedlock_replay)
|
||
&& target_record_will_replay (minus_one_ptid, execution_direction))
|
||
{
|
||
/* User-settable 'scheduler' mode requires solo thread resume in replay
|
||
mode. */
|
||
resume_ptid = inferior_ptid;
|
||
}
|
||
else if (!sched_multi && target_supports_multi_process ())
|
||
{
|
||
/* Resume all threads of the current process (and none of other
|
||
processes). */
|
||
resume_ptid = ptid_t (inferior_ptid.pid ());
|
||
}
|
||
else
|
||
{
|
||
/* Resume all threads of all processes. */
|
||
resume_ptid = RESUME_ALL;
|
||
}
|
||
|
||
return resume_ptid;
|
||
}
|
||
|
||
/* Return a ptid representing the set of threads that we will resume,
|
||
in the perspective of the target, assuming run control handling
|
||
does not require leaving some threads stopped (e.g., stepping past
|
||
breakpoint). USER_STEP indicates whether we're about to start the
|
||
target for a stepping command. */
|
||
|
||
static ptid_t
|
||
internal_resume_ptid (int user_step)
|
||
{
|
||
/* In non-stop, we always control threads individually. Note that
|
||
the target may always work in non-stop mode even with "set
|
||
non-stop off", in which case user_visible_resume_ptid could
|
||
return a wildcard ptid. */
|
||
if (target_is_non_stop_p ())
|
||
return inferior_ptid;
|
||
else
|
||
return user_visible_resume_ptid (user_step);
|
||
}
|
||
|
||
/* Wrapper for target_resume, that handles infrun-specific
|
||
bookkeeping. */
|
||
|
||
static void
|
||
do_target_resume (ptid_t resume_ptid, int step, enum gdb_signal sig)
|
||
{
|
||
struct thread_info *tp = inferior_thread ();
|
||
|
||
gdb_assert (!tp->stop_requested);
|
||
|
||
/* Install inferior's terminal modes. */
|
||
target_terminal::inferior ();
|
||
|
||
/* Avoid confusing the next resume, if the next stop/resume
|
||
happens to apply to another thread. */
|
||
tp->suspend.stop_signal = GDB_SIGNAL_0;
|
||
|
||
/* Advise target which signals may be handled silently.
|
||
|
||
If we have removed breakpoints because we are stepping over one
|
||
in-line (in any thread), we need to receive all signals to avoid
|
||
accidentally skipping a breakpoint during execution of a signal
|
||
handler.
|
||
|
||
Likewise if we're displaced stepping, otherwise a trap for a
|
||
breakpoint in a signal handler might be confused with the
|
||
displaced step finishing. We don't make the displaced_step_fixup
|
||
step distinguish the cases instead, because:
|
||
|
||
- a backtrace while stopped in the signal handler would show the
|
||
scratch pad as frame older than the signal handler, instead of
|
||
the real mainline code.
|
||
|
||
- when the thread is later resumed, the signal handler would
|
||
return to the scratch pad area, which would no longer be
|
||
valid. */
|
||
if (step_over_info_valid_p ()
|
||
|| displaced_step_in_progress (tp->inf))
|
||
target_pass_signals ({});
|
||
else
|
||
target_pass_signals (signal_pass);
|
||
|
||
target_resume (resume_ptid, step, sig);
|
||
|
||
target_commit_resume ();
|
||
}
|
||
|
||
/* Resume the inferior. SIG is the signal to give the inferior
|
||
(GDB_SIGNAL_0 for none). Note: don't call this directly; instead
|
||
call 'resume', which handles exceptions. */
|
||
|
||
static void
|
||
resume_1 (enum gdb_signal sig)
|
||
{
|
||
struct regcache *regcache = get_current_regcache ();
|
||
struct gdbarch *gdbarch = regcache->arch ();
|
||
struct thread_info *tp = inferior_thread ();
|
||
CORE_ADDR pc = regcache_read_pc (regcache);
|
||
const address_space *aspace = regcache->aspace ();
|
||
ptid_t resume_ptid;
|
||
/* This represents the user's step vs continue request. When
|
||
deciding whether "set scheduler-locking step" applies, it's the
|
||
user's intention that counts. */
|
||
const int user_step = tp->control.stepping_command;
|
||
/* This represents what we'll actually request the target to do.
|
||
This can decay from a step to a continue, if e.g., we need to
|
||
implement single-stepping with breakpoints (software
|
||
single-step). */
|
||
int step;
|
||
|
||
gdb_assert (!tp->stop_requested);
|
||
gdb_assert (!thread_is_in_step_over_chain (tp));
|
||
|
||
if (tp->suspend.waitstatus_pending_p)
|
||
{
|
||
if (debug_infrun)
|
||
{
|
||
std::string statstr
|
||
= target_waitstatus_to_string (&tp->suspend.waitstatus);
|
||
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: resume: thread %s has pending wait "
|
||
"status %s (currently_stepping=%d).\n",
|
||
target_pid_to_str (tp->ptid).c_str (),
|
||
statstr.c_str (),
|
||
currently_stepping (tp));
|
||
}
|
||
|
||
tp->resumed = 1;
|
||
|
||
/* FIXME: What should we do if we are supposed to resume this
|
||
thread with a signal? Maybe we should maintain a queue of
|
||
pending signals to deliver. */
|
||
if (sig != GDB_SIGNAL_0)
|
||
{
|
||
warning (_("Couldn't deliver signal %s to %s."),
|
||
gdb_signal_to_name (sig),
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
}
|
||
|
||
tp->suspend.stop_signal = GDB_SIGNAL_0;
|
||
|
||
if (target_can_async_p ())
|
||
{
|
||
target_async (1);
|
||
/* Tell the event loop we have an event to process. */
|
||
mark_async_event_handler (infrun_async_inferior_event_token);
|
||
}
|
||
return;
|
||
}
|
||
|
||
tp->stepped_breakpoint = 0;
|
||
|
||
/* Depends on stepped_breakpoint. */
|
||
step = currently_stepping (tp);
|
||
|
||
if (current_inferior ()->waiting_for_vfork_done)
|
||
{
|
||
/* Don't try to single-step a vfork parent that is waiting for
|
||
the child to get out of the shared memory region (by exec'ing
|
||
or exiting). This is particularly important on software
|
||
single-step archs, as the child process would trip on the
|
||
software single step breakpoint inserted for the parent
|
||
process. Since the parent will not actually execute any
|
||
instruction until the child is out of the shared region (such
|
||
are vfork's semantics), it is safe to simply continue it.
|
||
Eventually, we'll see a TARGET_WAITKIND_VFORK_DONE event for
|
||
the parent, and tell it to `keep_going', which automatically
|
||
re-sets it stepping. */
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: resume : clear step\n");
|
||
step = 0;
|
||
}
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: resume (step=%d, signal=%s), "
|
||
"trap_expected=%d, current thread [%s] at %s\n",
|
||
step, gdb_signal_to_symbol_string (sig),
|
||
tp->control.trap_expected,
|
||
target_pid_to_str (inferior_ptid).c_str (),
|
||
paddress (gdbarch, pc));
|
||
|
||
/* Normally, by the time we reach `resume', the breakpoints are either
|
||
removed or inserted, as appropriate. The exception is if we're sitting
|
||
at a permanent breakpoint; we need to step over it, but permanent
|
||
breakpoints can't be removed. So we have to test for it here. */
|
||
if (breakpoint_here_p (aspace, pc) == permanent_breakpoint_here)
|
||
{
|
||
if (sig != GDB_SIGNAL_0)
|
||
{
|
||
/* We have a signal to pass to the inferior. The resume
|
||
may, or may not take us to the signal handler. If this
|
||
is a step, we'll need to stop in the signal handler, if
|
||
there's one, (if the target supports stepping into
|
||
handlers), or in the next mainline instruction, if
|
||
there's no handler. If this is a continue, we need to be
|
||
sure to run the handler with all breakpoints inserted.
|
||
In all cases, set a breakpoint at the current address
|
||
(where the handler returns to), and once that breakpoint
|
||
is hit, resume skipping the permanent breakpoint. If
|
||
that breakpoint isn't hit, then we've stepped into the
|
||
signal handler (or hit some other event). We'll delete
|
||
the step-resume breakpoint then. */
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: resume: skipping permanent breakpoint, "
|
||
"deliver signal first\n");
|
||
|
||
clear_step_over_info ();
|
||
tp->control.trap_expected = 0;
|
||
|
||
if (tp->control.step_resume_breakpoint == NULL)
|
||
{
|
||
/* Set a "high-priority" step-resume, as we don't want
|
||
user breakpoints at PC to trigger (again) when this
|
||
hits. */
|
||
insert_hp_step_resume_breakpoint_at_frame (get_current_frame ());
|
||
gdb_assert (tp->control.step_resume_breakpoint->loc->permanent);
|
||
|
||
tp->step_after_step_resume_breakpoint = step;
|
||
}
|
||
|
||
insert_breakpoints ();
|
||
}
|
||
else
|
||
{
|
||
/* There's no signal to pass, we can go ahead and skip the
|
||
permanent breakpoint manually. */
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: resume: skipping permanent breakpoint\n");
|
||
gdbarch_skip_permanent_breakpoint (gdbarch, regcache);
|
||
/* Update pc to reflect the new address from which we will
|
||
execute instructions. */
|
||
pc = regcache_read_pc (regcache);
|
||
|
||
if (step)
|
||
{
|
||
/* We've already advanced the PC, so the stepping part
|
||
is done. Now we need to arrange for a trap to be
|
||
reported to handle_inferior_event. Set a breakpoint
|
||
at the current PC, and run to it. Don't update
|
||
prev_pc, because if we end in
|
||
switch_back_to_stepped_thread, we want the "expected
|
||
thread advanced also" branch to be taken. IOW, we
|
||
don't want this thread to step further from PC
|
||
(overstep). */
|
||
gdb_assert (!step_over_info_valid_p ());
|
||
insert_single_step_breakpoint (gdbarch, aspace, pc);
|
||
insert_breakpoints ();
|
||
|
||
resume_ptid = internal_resume_ptid (user_step);
|
||
do_target_resume (resume_ptid, 0, GDB_SIGNAL_0);
|
||
tp->resumed = 1;
|
||
return;
|
||
}
|
||
}
|
||
}
|
||
|
||
/* If we have a breakpoint to step over, make sure to do a single
|
||
step only. Same if we have software watchpoints. */
|
||
if (tp->control.trap_expected || bpstat_should_step ())
|
||
tp->control.may_range_step = 0;
|
||
|
||
/* If enabled, step over breakpoints by executing a copy of the
|
||
instruction at a different address.
|
||
|
||
We can't use displaced stepping when we have a signal to deliver;
|
||
the comments for displaced_step_prepare explain why. The
|
||
comments in the handle_inferior event for dealing with 'random
|
||
signals' explain what we do instead.
|
||
|
||
We can't use displaced stepping when we are waiting for vfork_done
|
||
event, displaced stepping breaks the vfork child similarly as single
|
||
step software breakpoint. */
|
||
if (tp->control.trap_expected
|
||
&& use_displaced_stepping (tp)
|
||
&& !step_over_info_valid_p ()
|
||
&& sig == GDB_SIGNAL_0
|
||
&& !current_inferior ()->waiting_for_vfork_done)
|
||
{
|
||
int prepared = displaced_step_prepare (tp);
|
||
|
||
if (prepared == 0)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"Got placed in step-over queue\n");
|
||
|
||
tp->control.trap_expected = 0;
|
||
return;
|
||
}
|
||
else if (prepared < 0)
|
||
{
|
||
/* Fallback to stepping over the breakpoint in-line. */
|
||
|
||
if (target_is_non_stop_p ())
|
||
stop_all_threads ();
|
||
|
||
set_step_over_info (regcache->aspace (),
|
||
regcache_read_pc (regcache), 0, tp->global_num);
|
||
|
||
step = maybe_software_singlestep (gdbarch, pc);
|
||
|
||
insert_breakpoints ();
|
||
}
|
||
else if (prepared > 0)
|
||
{
|
||
struct displaced_step_inferior_state *displaced;
|
||
|
||
/* Update pc to reflect the new address from which we will
|
||
execute instructions due to displaced stepping. */
|
||
pc = regcache_read_pc (get_thread_regcache (tp));
|
||
|
||
displaced = get_displaced_stepping_state (tp->inf);
|
||
step = gdbarch_displaced_step_hw_singlestep (gdbarch,
|
||
displaced->step_closure);
|
||
}
|
||
}
|
||
|
||
/* Do we need to do it the hard way, w/temp breakpoints? */
|
||
else if (step)
|
||
step = maybe_software_singlestep (gdbarch, pc);
|
||
|
||
/* Currently, our software single-step implementation leads to different
|
||
results than hardware single-stepping in one situation: when stepping
|
||
into delivering a signal which has an associated signal handler,
|
||
hardware single-step will stop at the first instruction of the handler,
|
||
while software single-step will simply skip execution of the handler.
|
||
|
||
For now, this difference in behavior is accepted since there is no
|
||
easy way to actually implement single-stepping into a signal handler
|
||
without kernel support.
|
||
|
||
However, there is one scenario where this difference leads to follow-on
|
||
problems: if we're stepping off a breakpoint by removing all breakpoints
|
||
and then single-stepping. In this case, the software single-step
|
||
behavior means that even if there is a *breakpoint* in the signal
|
||
handler, GDB still would not stop.
|
||
|
||
Fortunately, we can at least fix this particular issue. We detect
|
||
here the case where we are about to deliver a signal while software
|
||
single-stepping with breakpoints removed. In this situation, we
|
||
revert the decisions to remove all breakpoints and insert single-
|
||
step breakpoints, and instead we install a step-resume breakpoint
|
||
at the current address, deliver the signal without stepping, and
|
||
once we arrive back at the step-resume breakpoint, actually step
|
||
over the breakpoint we originally wanted to step over. */
|
||
if (thread_has_single_step_breakpoints_set (tp)
|
||
&& sig != GDB_SIGNAL_0
|
||
&& step_over_info_valid_p ())
|
||
{
|
||
/* If we have nested signals or a pending signal is delivered
|
||
immediately after a handler returns, might might already have
|
||
a step-resume breakpoint set on the earlier handler. We cannot
|
||
set another step-resume breakpoint; just continue on until the
|
||
original breakpoint is hit. */
|
||
if (tp->control.step_resume_breakpoint == NULL)
|
||
{
|
||
insert_hp_step_resume_breakpoint_at_frame (get_current_frame ());
|
||
tp->step_after_step_resume_breakpoint = 1;
|
||
}
|
||
|
||
delete_single_step_breakpoints (tp);
|
||
|
||
clear_step_over_info ();
|
||
tp->control.trap_expected = 0;
|
||
|
||
insert_breakpoints ();
|
||
}
|
||
|
||
/* If STEP is set, it's a request to use hardware stepping
|
||
facilities. But in that case, we should never
|
||
use singlestep breakpoint. */
|
||
gdb_assert (!(thread_has_single_step_breakpoints_set (tp) && step));
|
||
|
||
/* Decide the set of threads to ask the target to resume. */
|
||
if (tp->control.trap_expected)
|
||
{
|
||
/* We're allowing a thread to run past a breakpoint it has
|
||
hit, either by single-stepping the thread with the breakpoint
|
||
removed, or by displaced stepping, with the breakpoint inserted.
|
||
In the former case, we need to single-step only this thread,
|
||
and keep others stopped, as they can miss this breakpoint if
|
||
allowed to run. That's not really a problem for displaced
|
||
stepping, but, we still keep other threads stopped, in case
|
||
another thread is also stopped for a breakpoint waiting for
|
||
its turn in the displaced stepping queue. */
|
||
resume_ptid = inferior_ptid;
|
||
}
|
||
else
|
||
resume_ptid = internal_resume_ptid (user_step);
|
||
|
||
if (execution_direction != EXEC_REVERSE
|
||
&& step && breakpoint_inserted_here_p (aspace, pc))
|
||
{
|
||
/* There are two cases where we currently need to step a
|
||
breakpoint instruction when we have a signal to deliver:
|
||
|
||
- See handle_signal_stop where we handle random signals that
|
||
could take out us out of the stepping range. Normally, in
|
||
that case we end up continuing (instead of stepping) over the
|
||
signal handler with a breakpoint at PC, but there are cases
|
||
where we should _always_ single-step, even if we have a
|
||
step-resume breakpoint, like when a software watchpoint is
|
||
set. Assuming single-stepping and delivering a signal at the
|
||
same time would takes us to the signal handler, then we could
|
||
have removed the breakpoint at PC to step over it. However,
|
||
some hardware step targets (like e.g., Mac OS) can't step
|
||
into signal handlers, and for those, we need to leave the
|
||
breakpoint at PC inserted, as otherwise if the handler
|
||
recurses and executes PC again, it'll miss the breakpoint.
|
||
So we leave the breakpoint inserted anyway, but we need to
|
||
record that we tried to step a breakpoint instruction, so
|
||
that adjust_pc_after_break doesn't end up confused.
|
||
|
||
- In non-stop if we insert a breakpoint (e.g., a step-resume)
|
||
in one thread after another thread that was stepping had been
|
||
momentarily paused for a step-over. When we re-resume the
|
||
stepping thread, it may be resumed from that address with a
|
||
breakpoint that hasn't trapped yet. Seen with
|
||
gdb.threads/non-stop-fair-events.exp, on targets that don't
|
||
do displaced stepping. */
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: resume: [%s] stepped breakpoint\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
|
||
tp->stepped_breakpoint = 1;
|
||
|
||
/* Most targets can step a breakpoint instruction, thus
|
||
executing it normally. But if this one cannot, just
|
||
continue and we will hit it anyway. */
|
||
if (gdbarch_cannot_step_breakpoint (gdbarch))
|
||
step = 0;
|
||
}
|
||
|
||
if (debug_displaced
|
||
&& tp->control.trap_expected
|
||
&& use_displaced_stepping (tp)
|
||
&& !step_over_info_valid_p ())
|
||
{
|
||
struct regcache *resume_regcache = get_thread_regcache (tp);
|
||
struct gdbarch *resume_gdbarch = resume_regcache->arch ();
|
||
CORE_ADDR actual_pc = regcache_read_pc (resume_regcache);
|
||
gdb_byte buf[4];
|
||
|
||
fprintf_unfiltered (gdb_stdlog, "displaced: run %s: ",
|
||
paddress (resume_gdbarch, actual_pc));
|
||
read_memory (actual_pc, buf, sizeof (buf));
|
||
displaced_step_dump_bytes (gdb_stdlog, buf, sizeof (buf));
|
||
}
|
||
|
||
if (tp->control.may_range_step)
|
||
{
|
||
/* If we're resuming a thread with the PC out of the step
|
||
range, then we're doing some nested/finer run control
|
||
operation, like stepping the thread out of the dynamic
|
||
linker or the displaced stepping scratch pad. We
|
||
shouldn't have allowed a range step then. */
|
||
gdb_assert (pc_in_thread_step_range (pc, tp));
|
||
}
|
||
|
||
do_target_resume (resume_ptid, step, sig);
|
||
tp->resumed = 1;
|
||
}
|
||
|
||
/* Resume the inferior. SIG is the signal to give the inferior
|
||
(GDB_SIGNAL_0 for none). This is a wrapper around 'resume_1' that
|
||
rolls back state on error. */
|
||
|
||
static void
|
||
resume (gdb_signal sig)
|
||
{
|
||
try
|
||
{
|
||
resume_1 (sig);
|
||
}
|
||
catch (const gdb_exception &ex)
|
||
{
|
||
/* If resuming is being aborted for any reason, delete any
|
||
single-step breakpoint resume_1 may have created, to avoid
|
||
confusing the following resumption, and to avoid leaving
|
||
single-step breakpoints perturbing other threads, in case
|
||
we're running in non-stop mode. */
|
||
if (inferior_ptid != null_ptid)
|
||
delete_single_step_breakpoints (inferior_thread ());
|
||
throw;
|
||
}
|
||
}
|
||
|
||
|
||
/* Proceeding. */
|
||
|
||
/* See infrun.h. */
|
||
|
||
/* Counter that tracks number of user visible stops. This can be used
|
||
to tell whether a command has proceeded the inferior past the
|
||
current location. This allows e.g., inferior function calls in
|
||
breakpoint commands to not interrupt the command list. When the
|
||
call finishes successfully, the inferior is standing at the same
|
||
breakpoint as if nothing happened (and so we don't call
|
||
normal_stop). */
|
||
static ULONGEST current_stop_id;
|
||
|
||
/* See infrun.h. */
|
||
|
||
ULONGEST
|
||
get_stop_id (void)
|
||
{
|
||
return current_stop_id;
|
||
}
|
||
|
||
/* Called when we report a user visible stop. */
|
||
|
||
static void
|
||
new_stop_id (void)
|
||
{
|
||
current_stop_id++;
|
||
}
|
||
|
||
/* Clear out all variables saying what to do when inferior is continued.
|
||
First do this, then set the ones you want, then call `proceed'. */
|
||
|
||
static void
|
||
clear_proceed_status_thread (struct thread_info *tp)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: clear_proceed_status_thread (%s)\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
|
||
/* If we're starting a new sequence, then the previous finished
|
||
single-step is no longer relevant. */
|
||
if (tp->suspend.waitstatus_pending_p)
|
||
{
|
||
if (tp->suspend.stop_reason == TARGET_STOPPED_BY_SINGLE_STEP)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: clear_proceed_status: pending "
|
||
"event of %s was a finished step. "
|
||
"Discarding.\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
|
||
tp->suspend.waitstatus_pending_p = 0;
|
||
tp->suspend.stop_reason = TARGET_STOPPED_BY_NO_REASON;
|
||
}
|
||
else if (debug_infrun)
|
||
{
|
||
std::string statstr
|
||
= target_waitstatus_to_string (&tp->suspend.waitstatus);
|
||
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: clear_proceed_status_thread: thread %s "
|
||
"has pending wait status %s "
|
||
"(currently_stepping=%d).\n",
|
||
target_pid_to_str (tp->ptid).c_str (),
|
||
statstr.c_str (),
|
||
currently_stepping (tp));
|
||
}
|
||
}
|
||
|
||
/* If this signal should not be seen by program, give it zero.
|
||
Used for debugging signals. */
|
||
if (!signal_pass_state (tp->suspend.stop_signal))
|
||
tp->suspend.stop_signal = GDB_SIGNAL_0;
|
||
|
||
delete tp->thread_fsm;
|
||
tp->thread_fsm = NULL;
|
||
|
||
tp->control.trap_expected = 0;
|
||
tp->control.step_range_start = 0;
|
||
tp->control.step_range_end = 0;
|
||
tp->control.may_range_step = 0;
|
||
tp->control.step_frame_id = null_frame_id;
|
||
tp->control.step_stack_frame_id = null_frame_id;
|
||
tp->control.step_over_calls = STEP_OVER_UNDEBUGGABLE;
|
||
tp->control.step_start_function = NULL;
|
||
tp->stop_requested = 0;
|
||
|
||
tp->control.stop_step = 0;
|
||
|
||
tp->control.proceed_to_finish = 0;
|
||
|
||
tp->control.stepping_command = 0;
|
||
|
||
/* Discard any remaining commands or status from previous stop. */
|
||
bpstat_clear (&tp->control.stop_bpstat);
|
||
}
|
||
|
||
void
|
||
clear_proceed_status (int step)
|
||
{
|
||
/* With scheduler-locking replay, stop replaying other threads if we're
|
||
not replaying the user-visible resume ptid.
|
||
|
||
This is a convenience feature to not require the user to explicitly
|
||
stop replaying the other threads. We're assuming that the user's
|
||
intent is to resume tracing the recorded process. */
|
||
if (!non_stop && scheduler_mode == schedlock_replay
|
||
&& target_record_is_replaying (minus_one_ptid)
|
||
&& !target_record_will_replay (user_visible_resume_ptid (step),
|
||
execution_direction))
|
||
target_record_stop_replaying ();
|
||
|
||
if (!non_stop && inferior_ptid != null_ptid)
|
||
{
|
||
ptid_t resume_ptid = user_visible_resume_ptid (step);
|
||
|
||
/* In all-stop mode, delete the per-thread status of all threads
|
||
we're about to resume, implicitly and explicitly. */
|
||
for (thread_info *tp : all_non_exited_threads (resume_ptid))
|
||
clear_proceed_status_thread (tp);
|
||
}
|
||
|
||
if (inferior_ptid != null_ptid)
|
||
{
|
||
struct inferior *inferior;
|
||
|
||
if (non_stop)
|
||
{
|
||
/* If in non-stop mode, only delete the per-thread status of
|
||
the current thread. */
|
||
clear_proceed_status_thread (inferior_thread ());
|
||
}
|
||
|
||
inferior = current_inferior ();
|
||
inferior->control.stop_soon = NO_STOP_QUIETLY;
|
||
}
|
||
|
||
gdb::observers::about_to_proceed.notify ();
|
||
}
|
||
|
||
/* Returns true if TP is still stopped at a breakpoint that needs
|
||
stepping-over in order to make progress. If the breakpoint is gone
|
||
meanwhile, we can skip the whole step-over dance. */
|
||
|
||
static int
|
||
thread_still_needs_step_over_bp (struct thread_info *tp)
|
||
{
|
||
if (tp->stepping_over_breakpoint)
|
||
{
|
||
struct regcache *regcache = get_thread_regcache (tp);
|
||
|
||
if (breakpoint_here_p (regcache->aspace (),
|
||
regcache_read_pc (regcache))
|
||
== ordinary_breakpoint_here)
|
||
return 1;
|
||
|
||
tp->stepping_over_breakpoint = 0;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
/* Check whether thread TP still needs to start a step-over in order
|
||
to make progress when resumed. Returns an bitwise or of enum
|
||
step_over_what bits, indicating what needs to be stepped over. */
|
||
|
||
static step_over_what
|
||
thread_still_needs_step_over (struct thread_info *tp)
|
||
{
|
||
step_over_what what = 0;
|
||
|
||
if (thread_still_needs_step_over_bp (tp))
|
||
what |= STEP_OVER_BREAKPOINT;
|
||
|
||
if (tp->stepping_over_watchpoint
|
||
&& !target_have_steppable_watchpoint)
|
||
what |= STEP_OVER_WATCHPOINT;
|
||
|
||
return what;
|
||
}
|
||
|
||
/* Returns true if scheduler locking applies. STEP indicates whether
|
||
we're about to do a step/next-like command to a thread. */
|
||
|
||
static int
|
||
schedlock_applies (struct thread_info *tp)
|
||
{
|
||
return (scheduler_mode == schedlock_on
|
||
|| (scheduler_mode == schedlock_step
|
||
&& tp->control.stepping_command)
|
||
|| (scheduler_mode == schedlock_replay
|
||
&& target_record_will_replay (minus_one_ptid,
|
||
execution_direction)));
|
||
}
|
||
|
||
/* Basic routine for continuing the program in various fashions.
|
||
|
||
ADDR is the address to resume at, or -1 for resume where stopped.
|
||
SIGGNAL is the signal to give it, or GDB_SIGNAL_0 for none,
|
||
or GDB_SIGNAL_DEFAULT for act according to how it stopped.
|
||
|
||
You should call clear_proceed_status before calling proceed. */
|
||
|
||
void
|
||
proceed (CORE_ADDR addr, enum gdb_signal siggnal)
|
||
{
|
||
struct regcache *regcache;
|
||
struct gdbarch *gdbarch;
|
||
CORE_ADDR pc;
|
||
ptid_t resume_ptid;
|
||
struct execution_control_state ecss;
|
||
struct execution_control_state *ecs = &ecss;
|
||
int started;
|
||
|
||
/* If we're stopped at a fork/vfork, follow the branch set by the
|
||
"set follow-fork-mode" command; otherwise, we'll just proceed
|
||
resuming the current thread. */
|
||
if (!follow_fork ())
|
||
{
|
||
/* The target for some reason decided not to resume. */
|
||
normal_stop ();
|
||
if (target_can_async_p ())
|
||
inferior_event_handler (INF_EXEC_COMPLETE, NULL);
|
||
return;
|
||
}
|
||
|
||
/* We'll update this if & when we switch to a new thread. */
|
||
previous_inferior_ptid = inferior_ptid;
|
||
|
||
regcache = get_current_regcache ();
|
||
gdbarch = regcache->arch ();
|
||
const address_space *aspace = regcache->aspace ();
|
||
|
||
pc = regcache_read_pc (regcache);
|
||
thread_info *cur_thr = inferior_thread ();
|
||
|
||
/* Fill in with reasonable starting values. */
|
||
init_thread_stepping_state (cur_thr);
|
||
|
||
gdb_assert (!thread_is_in_step_over_chain (cur_thr));
|
||
|
||
if (addr == (CORE_ADDR) -1)
|
||
{
|
||
if (pc == cur_thr->suspend.stop_pc
|
||
&& breakpoint_here_p (aspace, pc) == ordinary_breakpoint_here
|
||
&& execution_direction != EXEC_REVERSE)
|
||
/* There is a breakpoint at the address we will resume at,
|
||
step one instruction before inserting breakpoints so that
|
||
we do not stop right away (and report a second hit at this
|
||
breakpoint).
|
||
|
||
Note, we don't do this in reverse, because we won't
|
||
actually be executing the breakpoint insn anyway.
|
||
We'll be (un-)executing the previous instruction. */
|
||
cur_thr->stepping_over_breakpoint = 1;
|
||
else if (gdbarch_single_step_through_delay_p (gdbarch)
|
||
&& gdbarch_single_step_through_delay (gdbarch,
|
||
get_current_frame ()))
|
||
/* We stepped onto an instruction that needs to be stepped
|
||
again before re-inserting the breakpoint, do so. */
|
||
cur_thr->stepping_over_breakpoint = 1;
|
||
}
|
||
else
|
||
{
|
||
regcache_write_pc (regcache, addr);
|
||
}
|
||
|
||
if (siggnal != GDB_SIGNAL_DEFAULT)
|
||
cur_thr->suspend.stop_signal = siggnal;
|
||
|
||
resume_ptid = user_visible_resume_ptid (cur_thr->control.stepping_command);
|
||
|
||
/* If an exception is thrown from this point on, make sure to
|
||
propagate GDB's knowledge of the executing state to the
|
||
frontend/user running state. */
|
||
scoped_finish_thread_state finish_state (resume_ptid);
|
||
|
||
/* Even if RESUME_PTID is a wildcard, and we end up resuming fewer
|
||
threads (e.g., we might need to set threads stepping over
|
||
breakpoints first), from the user/frontend's point of view, all
|
||
threads in RESUME_PTID are now running. Unless we're calling an
|
||
inferior function, as in that case we pretend the inferior
|
||
doesn't run at all. */
|
||
if (!cur_thr->control.in_infcall)
|
||
set_running (resume_ptid, 1);
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: proceed (addr=%s, signal=%s)\n",
|
||
paddress (gdbarch, addr),
|
||
gdb_signal_to_symbol_string (siggnal));
|
||
|
||
annotate_starting ();
|
||
|
||
/* Make sure that output from GDB appears before output from the
|
||
inferior. */
|
||
gdb_flush (gdb_stdout);
|
||
|
||
/* Since we've marked the inferior running, give it the terminal. A
|
||
QUIT/Ctrl-C from here on is forwarded to the target (which can
|
||
still detect attempts to unblock a stuck connection with repeated
|
||
Ctrl-C from within target_pass_ctrlc). */
|
||
target_terminal::inferior ();
|
||
|
||
/* In a multi-threaded task we may select another thread and
|
||
then continue or step.
|
||
|
||
But if a thread that we're resuming had stopped at a breakpoint,
|
||
it will immediately cause another breakpoint stop without any
|
||
execution (i.e. it will report a breakpoint hit incorrectly). So
|
||
we must step over it first.
|
||
|
||
Look for threads other than the current (TP) that reported a
|
||
breakpoint hit and haven't been resumed yet since. */
|
||
|
||
/* If scheduler locking applies, we can avoid iterating over all
|
||
threads. */
|
||
if (!non_stop && !schedlock_applies (cur_thr))
|
||
{
|
||
for (thread_info *tp : all_non_exited_threads (resume_ptid))
|
||
{
|
||
/* Ignore the current thread here. It's handled
|
||
afterwards. */
|
||
if (tp == cur_thr)
|
||
continue;
|
||
|
||
if (!thread_still_needs_step_over (tp))
|
||
continue;
|
||
|
||
gdb_assert (!thread_is_in_step_over_chain (tp));
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: need to step-over [%s] first\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
|
||
thread_step_over_chain_enqueue (tp);
|
||
}
|
||
}
|
||
|
||
/* Enqueue the current thread last, so that we move all other
|
||
threads over their breakpoints first. */
|
||
if (cur_thr->stepping_over_breakpoint)
|
||
thread_step_over_chain_enqueue (cur_thr);
|
||
|
||
/* If the thread isn't started, we'll still need to set its prev_pc,
|
||
so that switch_back_to_stepped_thread knows the thread hasn't
|
||
advanced. Must do this before resuming any thread, as in
|
||
all-stop/remote, once we resume we can't send any other packet
|
||
until the target stops again. */
|
||
cur_thr->prev_pc = regcache_read_pc (regcache);
|
||
|
||
{
|
||
scoped_restore save_defer_tc = make_scoped_defer_target_commit_resume ();
|
||
|
||
started = start_step_over ();
|
||
|
||
if (step_over_info_valid_p ())
|
||
{
|
||
/* Either this thread started a new in-line step over, or some
|
||
other thread was already doing one. In either case, don't
|
||
resume anything else until the step-over is finished. */
|
||
}
|
||
else if (started && !target_is_non_stop_p ())
|
||
{
|
||
/* A new displaced stepping sequence was started. In all-stop,
|
||
we can't talk to the target anymore until it next stops. */
|
||
}
|
||
else if (!non_stop && target_is_non_stop_p ())
|
||
{
|
||
/* In all-stop, but the target is always in non-stop mode.
|
||
Start all other threads that are implicitly resumed too. */
|
||
for (thread_info *tp : all_non_exited_threads (resume_ptid))
|
||
{
|
||
if (tp->resumed)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: proceed: [%s] resumed\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
gdb_assert (tp->executing || tp->suspend.waitstatus_pending_p);
|
||
continue;
|
||
}
|
||
|
||
if (thread_is_in_step_over_chain (tp))
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: proceed: [%s] needs step-over\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
continue;
|
||
}
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: proceed: resuming %s\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
|
||
reset_ecs (ecs, tp);
|
||
switch_to_thread (tp);
|
||
keep_going_pass_signal (ecs);
|
||
if (!ecs->wait_some_more)
|
||
error (_("Command aborted."));
|
||
}
|
||
}
|
||
else if (!cur_thr->resumed && !thread_is_in_step_over_chain (cur_thr))
|
||
{
|
||
/* The thread wasn't started, and isn't queued, run it now. */
|
||
reset_ecs (ecs, cur_thr);
|
||
switch_to_thread (cur_thr);
|
||
keep_going_pass_signal (ecs);
|
||
if (!ecs->wait_some_more)
|
||
error (_("Command aborted."));
|
||
}
|
||
}
|
||
|
||
target_commit_resume ();
|
||
|
||
finish_state.release ();
|
||
|
||
/* Tell the event loop to wait for it to stop. If the target
|
||
supports asynchronous execution, it'll do this from within
|
||
target_resume. */
|
||
if (!target_can_async_p ())
|
||
mark_async_event_handler (infrun_async_inferior_event_token);
|
||
}
|
||
|
||
|
||
/* Start remote-debugging of a machine over a serial link. */
|
||
|
||
void
|
||
start_remote (int from_tty)
|
||
{
|
||
struct inferior *inferior;
|
||
|
||
inferior = current_inferior ();
|
||
inferior->control.stop_soon = STOP_QUIETLY_REMOTE;
|
||
|
||
/* Always go on waiting for the target, regardless of the mode. */
|
||
/* FIXME: cagney/1999-09-23: At present it isn't possible to
|
||
indicate to wait_for_inferior that a target should timeout if
|
||
nothing is returned (instead of just blocking). Because of this,
|
||
targets expecting an immediate response need to, internally, set
|
||
things up so that the target_wait() is forced to eventually
|
||
timeout. */
|
||
/* FIXME: cagney/1999-09-24: It isn't possible for target_open() to
|
||
differentiate to its caller what the state of the target is after
|
||
the initial open has been performed. Here we're assuming that
|
||
the target has stopped. It should be possible to eventually have
|
||
target_open() return to the caller an indication that the target
|
||
is currently running and GDB state should be set to the same as
|
||
for an async run. */
|
||
wait_for_inferior ();
|
||
|
||
/* Now that the inferior has stopped, do any bookkeeping like
|
||
loading shared libraries. We want to do this before normal_stop,
|
||
so that the displayed frame is up to date. */
|
||
post_create_inferior (current_top_target (), from_tty);
|
||
|
||
normal_stop ();
|
||
}
|
||
|
||
/* Initialize static vars when a new inferior begins. */
|
||
|
||
void
|
||
init_wait_for_inferior (void)
|
||
{
|
||
/* These are meaningless until the first time through wait_for_inferior. */
|
||
|
||
breakpoint_init_inferior (inf_starting);
|
||
|
||
clear_proceed_status (0);
|
||
|
||
target_last_wait_ptid = minus_one_ptid;
|
||
|
||
previous_inferior_ptid = inferior_ptid;
|
||
}
|
||
|
||
|
||
|
||
static void handle_inferior_event (struct execution_control_state *ecs);
|
||
|
||
static void handle_step_into_function (struct gdbarch *gdbarch,
|
||
struct execution_control_state *ecs);
|
||
static void handle_step_into_function_backward (struct gdbarch *gdbarch,
|
||
struct execution_control_state *ecs);
|
||
static void handle_signal_stop (struct execution_control_state *ecs);
|
||
static void check_exception_resume (struct execution_control_state *,
|
||
struct frame_info *);
|
||
|
||
static void end_stepping_range (struct execution_control_state *ecs);
|
||
static void stop_waiting (struct execution_control_state *ecs);
|
||
static void keep_going (struct execution_control_state *ecs);
|
||
static void process_event_stop_test (struct execution_control_state *ecs);
|
||
static int switch_back_to_stepped_thread (struct execution_control_state *ecs);
|
||
|
||
/* This function is attached as a "thread_stop_requested" observer.
|
||
Cleanup local state that assumed the PTID was to be resumed, and
|
||
report the stop to the frontend. */
|
||
|
||
static void
|
||
infrun_thread_stop_requested (ptid_t ptid)
|
||
{
|
||
/* PTID was requested to stop. If the thread was already stopped,
|
||
but the user/frontend doesn't know about that yet (e.g., the
|
||
thread had been temporarily paused for some step-over), set up
|
||
for reporting the stop now. */
|
||
for (thread_info *tp : all_threads (ptid))
|
||
{
|
||
if (tp->state != THREAD_RUNNING)
|
||
continue;
|
||
if (tp->executing)
|
||
continue;
|
||
|
||
/* Remove matching threads from the step-over queue, so
|
||
start_step_over doesn't try to resume them
|
||
automatically. */
|
||
if (thread_is_in_step_over_chain (tp))
|
||
thread_step_over_chain_remove (tp);
|
||
|
||
/* If the thread is stopped, but the user/frontend doesn't
|
||
know about that yet, queue a pending event, as if the
|
||
thread had just stopped now. Unless the thread already had
|
||
a pending event. */
|
||
if (!tp->suspend.waitstatus_pending_p)
|
||
{
|
||
tp->suspend.waitstatus_pending_p = 1;
|
||
tp->suspend.waitstatus.kind = TARGET_WAITKIND_STOPPED;
|
||
tp->suspend.waitstatus.value.sig = GDB_SIGNAL_0;
|
||
}
|
||
|
||
/* Clear the inline-frame state, since we're re-processing the
|
||
stop. */
|
||
clear_inline_frame_state (tp->ptid);
|
||
|
||
/* If this thread was paused because some other thread was
|
||
doing an inline-step over, let that finish first. Once
|
||
that happens, we'll restart all threads and consume pending
|
||
stop events then. */
|
||
if (step_over_info_valid_p ())
|
||
continue;
|
||
|
||
/* Otherwise we can process the (new) pending event now. Set
|
||
it so this pending event is considered by
|
||
do_target_wait. */
|
||
tp->resumed = 1;
|
||
}
|
||
}
|
||
|
||
static void
|
||
infrun_thread_thread_exit (struct thread_info *tp, int silent)
|
||
{
|
||
if (target_last_wait_ptid == tp->ptid)
|
||
nullify_last_target_wait_ptid ();
|
||
}
|
||
|
||
/* Delete the step resume, single-step and longjmp/exception resume
|
||
breakpoints of TP. */
|
||
|
||
static void
|
||
delete_thread_infrun_breakpoints (struct thread_info *tp)
|
||
{
|
||
delete_step_resume_breakpoint (tp);
|
||
delete_exception_resume_breakpoint (tp);
|
||
delete_single_step_breakpoints (tp);
|
||
}
|
||
|
||
/* If the target still has execution, call FUNC for each thread that
|
||
just stopped. In all-stop, that's all the non-exited threads; in
|
||
non-stop, that's the current thread, only. */
|
||
|
||
typedef void (*for_each_just_stopped_thread_callback_func)
|
||
(struct thread_info *tp);
|
||
|
||
static void
|
||
for_each_just_stopped_thread (for_each_just_stopped_thread_callback_func func)
|
||
{
|
||
if (!target_has_execution || inferior_ptid == null_ptid)
|
||
return;
|
||
|
||
if (target_is_non_stop_p ())
|
||
{
|
||
/* If in non-stop mode, only the current thread stopped. */
|
||
func (inferior_thread ());
|
||
}
|
||
else
|
||
{
|
||
/* In all-stop mode, all threads have stopped. */
|
||
for (thread_info *tp : all_non_exited_threads ())
|
||
func (tp);
|
||
}
|
||
}
|
||
|
||
/* Delete the step resume and longjmp/exception resume breakpoints of
|
||
the threads that just stopped. */
|
||
|
||
static void
|
||
delete_just_stopped_threads_infrun_breakpoints (void)
|
||
{
|
||
for_each_just_stopped_thread (delete_thread_infrun_breakpoints);
|
||
}
|
||
|
||
/* Delete the single-step breakpoints of the threads that just
|
||
stopped. */
|
||
|
||
static void
|
||
delete_just_stopped_threads_single_step_breakpoints (void)
|
||
{
|
||
for_each_just_stopped_thread (delete_single_step_breakpoints);
|
||
}
|
||
|
||
/* See infrun.h. */
|
||
|
||
void
|
||
print_target_wait_results (ptid_t waiton_ptid, ptid_t result_ptid,
|
||
const struct target_waitstatus *ws)
|
||
{
|
||
std::string status_string = target_waitstatus_to_string (ws);
|
||
string_file stb;
|
||
|
||
/* The text is split over several lines because it was getting too long.
|
||
Call fprintf_unfiltered (gdb_stdlog) once so that the text is still
|
||
output as a unit; we want only one timestamp printed if debug_timestamp
|
||
is set. */
|
||
|
||
stb.printf ("infrun: target_wait (%d.%ld.%ld",
|
||
waiton_ptid.pid (),
|
||
waiton_ptid.lwp (),
|
||
waiton_ptid.tid ());
|
||
if (waiton_ptid.pid () != -1)
|
||
stb.printf (" [%s]", target_pid_to_str (waiton_ptid).c_str ());
|
||
stb.printf (", status) =\n");
|
||
stb.printf ("infrun: %d.%ld.%ld [%s],\n",
|
||
result_ptid.pid (),
|
||
result_ptid.lwp (),
|
||
result_ptid.tid (),
|
||
target_pid_to_str (result_ptid).c_str ());
|
||
stb.printf ("infrun: %s\n", status_string.c_str ());
|
||
|
||
/* This uses %s in part to handle %'s in the text, but also to avoid
|
||
a gcc error: the format attribute requires a string literal. */
|
||
fprintf_unfiltered (gdb_stdlog, "%s", stb.c_str ());
|
||
}
|
||
|
||
/* Select a thread at random, out of those which are resumed and have
|
||
had events. */
|
||
|
||
static struct thread_info *
|
||
random_pending_event_thread (ptid_t waiton_ptid)
|
||
{
|
||
int num_events = 0;
|
||
|
||
auto has_event = [] (thread_info *tp)
|
||
{
|
||
return (tp->resumed
|
||
&& tp->suspend.waitstatus_pending_p);
|
||
};
|
||
|
||
/* First see how many events we have. Count only resumed threads
|
||
that have an event pending. */
|
||
for (thread_info *tp : all_non_exited_threads (waiton_ptid))
|
||
if (has_event (tp))
|
||
num_events++;
|
||
|
||
if (num_events == 0)
|
||
return NULL;
|
||
|
||
/* Now randomly pick a thread out of those that have had events. */
|
||
int random_selector = (int) ((num_events * (double) rand ())
|
||
/ (RAND_MAX + 1.0));
|
||
|
||
if (debug_infrun && num_events > 1)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: Found %d events, selecting #%d\n",
|
||
num_events, random_selector);
|
||
|
||
/* Select the Nth thread that has had an event. */
|
||
for (thread_info *tp : all_non_exited_threads (waiton_ptid))
|
||
if (has_event (tp))
|
||
if (random_selector-- == 0)
|
||
return tp;
|
||
|
||
gdb_assert_not_reached ("event thread not found");
|
||
}
|
||
|
||
/* Wrapper for target_wait that first checks whether threads have
|
||
pending statuses to report before actually asking the target for
|
||
more events. */
|
||
|
||
static ptid_t
|
||
do_target_wait (ptid_t ptid, struct target_waitstatus *status, int options)
|
||
{
|
||
ptid_t event_ptid;
|
||
struct thread_info *tp;
|
||
|
||
/* First check if there is a resumed thread with a wait status
|
||
pending. */
|
||
if (ptid == minus_one_ptid || ptid.is_pid ())
|
||
{
|
||
tp = random_pending_event_thread (ptid);
|
||
}
|
||
else
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: Waiting for specific thread %s.\n",
|
||
target_pid_to_str (ptid).c_str ());
|
||
|
||
/* We have a specific thread to check. */
|
||
tp = find_thread_ptid (ptid);
|
||
gdb_assert (tp != NULL);
|
||
if (!tp->suspend.waitstatus_pending_p)
|
||
tp = NULL;
|
||
}
|
||
|
||
if (tp != NULL
|
||
&& (tp->suspend.stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT
|
||
|| tp->suspend.stop_reason == TARGET_STOPPED_BY_HW_BREAKPOINT))
|
||
{
|
||
struct regcache *regcache = get_thread_regcache (tp);
|
||
struct gdbarch *gdbarch = regcache->arch ();
|
||
CORE_ADDR pc;
|
||
int discard = 0;
|
||
|
||
pc = regcache_read_pc (regcache);
|
||
|
||
if (pc != tp->suspend.stop_pc)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: PC of %s changed. was=%s, now=%s\n",
|
||
target_pid_to_str (tp->ptid).c_str (),
|
||
paddress (gdbarch, tp->suspend.stop_pc),
|
||
paddress (gdbarch, pc));
|
||
discard = 1;
|
||
}
|
||
else if (!breakpoint_inserted_here_p (regcache->aspace (), pc))
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: previous breakpoint of %s, at %s gone\n",
|
||
target_pid_to_str (tp->ptid).c_str (),
|
||
paddress (gdbarch, pc));
|
||
|
||
discard = 1;
|
||
}
|
||
|
||
if (discard)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: pending event of %s cancelled.\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
|
||
tp->suspend.waitstatus.kind = TARGET_WAITKIND_SPURIOUS;
|
||
tp->suspend.stop_reason = TARGET_STOPPED_BY_NO_REASON;
|
||
}
|
||
}
|
||
|
||
if (tp != NULL)
|
||
{
|
||
if (debug_infrun)
|
||
{
|
||
std::string statstr
|
||
= target_waitstatus_to_string (&tp->suspend.waitstatus);
|
||
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: Using pending wait status %s for %s.\n",
|
||
statstr.c_str (),
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
}
|
||
|
||
/* Now that we've selected our final event LWP, un-adjust its PC
|
||
if it was a software breakpoint (and the target doesn't
|
||
always adjust the PC itself). */
|
||
if (tp->suspend.stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT
|
||
&& !target_supports_stopped_by_sw_breakpoint ())
|
||
{
|
||
struct regcache *regcache;
|
||
struct gdbarch *gdbarch;
|
||
int decr_pc;
|
||
|
||
regcache = get_thread_regcache (tp);
|
||
gdbarch = regcache->arch ();
|
||
|
||
decr_pc = gdbarch_decr_pc_after_break (gdbarch);
|
||
if (decr_pc != 0)
|
||
{
|
||
CORE_ADDR pc;
|
||
|
||
pc = regcache_read_pc (regcache);
|
||
regcache_write_pc (regcache, pc + decr_pc);
|
||
}
|
||
}
|
||
|
||
tp->suspend.stop_reason = TARGET_STOPPED_BY_NO_REASON;
|
||
*status = tp->suspend.waitstatus;
|
||
tp->suspend.waitstatus_pending_p = 0;
|
||
|
||
/* Wake up the event loop again, until all pending events are
|
||
processed. */
|
||
if (target_is_async_p ())
|
||
mark_async_event_handler (infrun_async_inferior_event_token);
|
||
return tp->ptid;
|
||
}
|
||
|
||
/* But if we don't find one, we'll have to wait. */
|
||
|
||
if (deprecated_target_wait_hook)
|
||
event_ptid = deprecated_target_wait_hook (ptid, status, options);
|
||
else
|
||
event_ptid = target_wait (ptid, status, options);
|
||
|
||
return event_ptid;
|
||
}
|
||
|
||
/* Prepare and stabilize the inferior for detaching it. E.g.,
|
||
detaching while a thread is displaced stepping is a recipe for
|
||
crashing it, as nothing would readjust the PC out of the scratch
|
||
pad. */
|
||
|
||
void
|
||
prepare_for_detach (void)
|
||
{
|
||
struct inferior *inf = current_inferior ();
|
||
ptid_t pid_ptid = ptid_t (inf->pid);
|
||
|
||
displaced_step_inferior_state *displaced = get_displaced_stepping_state (inf);
|
||
|
||
/* Is any thread of this process displaced stepping? If not,
|
||
there's nothing else to do. */
|
||
if (displaced->step_thread == nullptr)
|
||
return;
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"displaced-stepping in-process while detaching");
|
||
|
||
scoped_restore restore_detaching = make_scoped_restore (&inf->detaching, true);
|
||
|
||
while (displaced->step_thread != nullptr)
|
||
{
|
||
struct execution_control_state ecss;
|
||
struct execution_control_state *ecs;
|
||
|
||
ecs = &ecss;
|
||
memset (ecs, 0, sizeof (*ecs));
|
||
|
||
overlay_cache_invalid = 1;
|
||
/* Flush target cache before starting to handle each event.
|
||
Target was running and cache could be stale. This is just a
|
||
heuristic. Running threads may modify target memory, but we
|
||
don't get any event. */
|
||
target_dcache_invalidate ();
|
||
|
||
ecs->ptid = do_target_wait (pid_ptid, &ecs->ws, 0);
|
||
|
||
if (debug_infrun)
|
||
print_target_wait_results (pid_ptid, ecs->ptid, &ecs->ws);
|
||
|
||
/* If an error happens while handling the event, propagate GDB's
|
||
knowledge of the executing state to the frontend/user running
|
||
state. */
|
||
scoped_finish_thread_state finish_state (minus_one_ptid);
|
||
|
||
/* Now figure out what to do with the result of the result. */
|
||
handle_inferior_event (ecs);
|
||
|
||
/* No error, don't finish the state yet. */
|
||
finish_state.release ();
|
||
|
||
/* Breakpoints and watchpoints are not installed on the target
|
||
at this point, and signals are passed directly to the
|
||
inferior, so this must mean the process is gone. */
|
||
if (!ecs->wait_some_more)
|
||
{
|
||
restore_detaching.release ();
|
||
error (_("Program exited while detaching"));
|
||
}
|
||
}
|
||
|
||
restore_detaching.release ();
|
||
}
|
||
|
||
/* Wait for control to return from inferior to debugger.
|
||
|
||
If inferior gets a signal, we may decide to start it up again
|
||
instead of returning. That is why there is a loop in this function.
|
||
When this function actually returns it means the inferior
|
||
should be left stopped and GDB should read more commands. */
|
||
|
||
void
|
||
wait_for_inferior (void)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered
|
||
(gdb_stdlog, "infrun: wait_for_inferior ()\n");
|
||
|
||
SCOPE_EXIT { delete_just_stopped_threads_infrun_breakpoints (); };
|
||
|
||
/* If an error happens while handling the event, propagate GDB's
|
||
knowledge of the executing state to the frontend/user running
|
||
state. */
|
||
scoped_finish_thread_state finish_state (minus_one_ptid);
|
||
|
||
while (1)
|
||
{
|
||
struct execution_control_state ecss;
|
||
struct execution_control_state *ecs = &ecss;
|
||
ptid_t waiton_ptid = minus_one_ptid;
|
||
|
||
memset (ecs, 0, sizeof (*ecs));
|
||
|
||
overlay_cache_invalid = 1;
|
||
|
||
/* Flush target cache before starting to handle each event.
|
||
Target was running and cache could be stale. This is just a
|
||
heuristic. Running threads may modify target memory, but we
|
||
don't get any event. */
|
||
target_dcache_invalidate ();
|
||
|
||
ecs->ptid = do_target_wait (waiton_ptid, &ecs->ws, 0);
|
||
|
||
if (debug_infrun)
|
||
print_target_wait_results (waiton_ptid, ecs->ptid, &ecs->ws);
|
||
|
||
/* Now figure out what to do with the result of the result. */
|
||
handle_inferior_event (ecs);
|
||
|
||
if (!ecs->wait_some_more)
|
||
break;
|
||
}
|
||
|
||
/* No error, don't finish the state yet. */
|
||
finish_state.release ();
|
||
}
|
||
|
||
/* Cleanup that reinstalls the readline callback handler, if the
|
||
target is running in the background. If while handling the target
|
||
event something triggered a secondary prompt, like e.g., a
|
||
pagination prompt, we'll have removed the callback handler (see
|
||
gdb_readline_wrapper_line). Need to do this as we go back to the
|
||
event loop, ready to process further input. Note this has no
|
||
effect if the handler hasn't actually been removed, because calling
|
||
rl_callback_handler_install resets the line buffer, thus losing
|
||
input. */
|
||
|
||
static void
|
||
reinstall_readline_callback_handler_cleanup ()
|
||
{
|
||
struct ui *ui = current_ui;
|
||
|
||
if (!ui->async)
|
||
{
|
||
/* We're not going back to the top level event loop yet. Don't
|
||
install the readline callback, as it'd prep the terminal,
|
||
readline-style (raw, noecho) (e.g., --batch). We'll install
|
||
it the next time the prompt is displayed, when we're ready
|
||
for input. */
|
||
return;
|
||
}
|
||
|
||
if (ui->command_editing && ui->prompt_state != PROMPT_BLOCKED)
|
||
gdb_rl_callback_handler_reinstall ();
|
||
}
|
||
|
||
/* Clean up the FSMs of threads that are now stopped. In non-stop,
|
||
that's just the event thread. In all-stop, that's all threads. */
|
||
|
||
static void
|
||
clean_up_just_stopped_threads_fsms (struct execution_control_state *ecs)
|
||
{
|
||
if (ecs->event_thread != NULL
|
||
&& ecs->event_thread->thread_fsm != NULL)
|
||
ecs->event_thread->thread_fsm->clean_up (ecs->event_thread);
|
||
|
||
if (!non_stop)
|
||
{
|
||
for (thread_info *thr : all_non_exited_threads ())
|
||
{
|
||
if (thr->thread_fsm == NULL)
|
||
continue;
|
||
if (thr == ecs->event_thread)
|
||
continue;
|
||
|
||
switch_to_thread (thr);
|
||
thr->thread_fsm->clean_up (thr);
|
||
}
|
||
|
||
if (ecs->event_thread != NULL)
|
||
switch_to_thread (ecs->event_thread);
|
||
}
|
||
}
|
||
|
||
/* Helper for all_uis_check_sync_execution_done that works on the
|
||
current UI. */
|
||
|
||
static void
|
||
check_curr_ui_sync_execution_done (void)
|
||
{
|
||
struct ui *ui = current_ui;
|
||
|
||
if (ui->prompt_state == PROMPT_NEEDED
|
||
&& ui->async
|
||
&& !gdb_in_secondary_prompt_p (ui))
|
||
{
|
||
target_terminal::ours ();
|
||
gdb::observers::sync_execution_done.notify ();
|
||
ui_register_input_event_handler (ui);
|
||
}
|
||
}
|
||
|
||
/* See infrun.h. */
|
||
|
||
void
|
||
all_uis_check_sync_execution_done (void)
|
||
{
|
||
SWITCH_THRU_ALL_UIS ()
|
||
{
|
||
check_curr_ui_sync_execution_done ();
|
||
}
|
||
}
|
||
|
||
/* See infrun.h. */
|
||
|
||
void
|
||
all_uis_on_sync_execution_starting (void)
|
||
{
|
||
SWITCH_THRU_ALL_UIS ()
|
||
{
|
||
if (current_ui->prompt_state == PROMPT_NEEDED)
|
||
async_disable_stdin ();
|
||
}
|
||
}
|
||
|
||
/* Asynchronous version of wait_for_inferior. It is called by the
|
||
event loop whenever a change of state is detected on the file
|
||
descriptor corresponding to the target. It can be called more than
|
||
once to complete a single execution command. In such cases we need
|
||
to keep the state in a global variable ECSS. If it is the last time
|
||
that this function is called for a single execution command, then
|
||
report to the user that the inferior has stopped, and do the
|
||
necessary cleanups. */
|
||
|
||
void
|
||
fetch_inferior_event (void *client_data)
|
||
{
|
||
struct execution_control_state ecss;
|
||
struct execution_control_state *ecs = &ecss;
|
||
int cmd_done = 0;
|
||
ptid_t waiton_ptid = minus_one_ptid;
|
||
|
||
memset (ecs, 0, sizeof (*ecs));
|
||
|
||
/* Events are always processed with the main UI as current UI. This
|
||
way, warnings, debug output, etc. are always consistently sent to
|
||
the main console. */
|
||
scoped_restore save_ui = make_scoped_restore (¤t_ui, main_ui);
|
||
|
||
/* End up with readline processing input, if necessary. */
|
||
{
|
||
SCOPE_EXIT { reinstall_readline_callback_handler_cleanup (); };
|
||
|
||
/* We're handling a live event, so make sure we're doing live
|
||
debugging. If we're looking at traceframes while the target is
|
||
running, we're going to need to get back to that mode after
|
||
handling the event. */
|
||
gdb::optional<scoped_restore_current_traceframe> maybe_restore_traceframe;
|
||
if (non_stop)
|
||
{
|
||
maybe_restore_traceframe.emplace ();
|
||
set_current_traceframe (-1);
|
||
}
|
||
|
||
gdb::optional<scoped_restore_current_thread> maybe_restore_thread;
|
||
|
||
if (non_stop)
|
||
/* In non-stop mode, the user/frontend should not notice a thread
|
||
switch due to internal events. Make sure we reverse to the
|
||
user selected thread and frame after handling the event and
|
||
running any breakpoint commands. */
|
||
maybe_restore_thread.emplace ();
|
||
|
||
overlay_cache_invalid = 1;
|
||
/* Flush target cache before starting to handle each event. Target
|
||
was running and cache could be stale. This is just a heuristic.
|
||
Running threads may modify target memory, but we don't get any
|
||
event. */
|
||
target_dcache_invalidate ();
|
||
|
||
scoped_restore save_exec_dir
|
||
= make_scoped_restore (&execution_direction,
|
||
target_execution_direction ());
|
||
|
||
ecs->ptid = do_target_wait (waiton_ptid, &ecs->ws,
|
||
target_can_async_p () ? TARGET_WNOHANG : 0);
|
||
|
||
if (debug_infrun)
|
||
print_target_wait_results (waiton_ptid, ecs->ptid, &ecs->ws);
|
||
|
||
/* If an error happens while handling the event, propagate GDB's
|
||
knowledge of the executing state to the frontend/user running
|
||
state. */
|
||
ptid_t finish_ptid = !target_is_non_stop_p () ? minus_one_ptid : ecs->ptid;
|
||
scoped_finish_thread_state finish_state (finish_ptid);
|
||
|
||
/* Get executed before scoped_restore_current_thread above to apply
|
||
still for the thread which has thrown the exception. */
|
||
auto defer_bpstat_clear
|
||
= make_scope_exit (bpstat_clear_actions);
|
||
auto defer_delete_threads
|
||
= make_scope_exit (delete_just_stopped_threads_infrun_breakpoints);
|
||
|
||
/* Now figure out what to do with the result of the result. */
|
||
handle_inferior_event (ecs);
|
||
|
||
if (!ecs->wait_some_more)
|
||
{
|
||
struct inferior *inf = find_inferior_ptid (ecs->ptid);
|
||
int should_stop = 1;
|
||
struct thread_info *thr = ecs->event_thread;
|
||
|
||
delete_just_stopped_threads_infrun_breakpoints ();
|
||
|
||
if (thr != NULL)
|
||
{
|
||
struct thread_fsm *thread_fsm = thr->thread_fsm;
|
||
|
||
if (thread_fsm != NULL)
|
||
should_stop = thread_fsm->should_stop (thr);
|
||
}
|
||
|
||
if (!should_stop)
|
||
{
|
||
keep_going (ecs);
|
||
}
|
||
else
|
||
{
|
||
bool should_notify_stop = true;
|
||
int proceeded = 0;
|
||
|
||
clean_up_just_stopped_threads_fsms (ecs);
|
||
|
||
if (thr != NULL && thr->thread_fsm != NULL)
|
||
should_notify_stop = thr->thread_fsm->should_notify_stop ();
|
||
|
||
if (should_notify_stop)
|
||
{
|
||
/* We may not find an inferior if this was a process exit. */
|
||
if (inf == NULL || inf->control.stop_soon == NO_STOP_QUIETLY)
|
||
proceeded = normal_stop ();
|
||
}
|
||
|
||
if (!proceeded)
|
||
{
|
||
inferior_event_handler (INF_EXEC_COMPLETE, NULL);
|
||
cmd_done = 1;
|
||
}
|
||
}
|
||
}
|
||
|
||
defer_delete_threads.release ();
|
||
defer_bpstat_clear.release ();
|
||
|
||
/* No error, don't finish the thread states yet. */
|
||
finish_state.release ();
|
||
|
||
/* This scope is used to ensure that readline callbacks are
|
||
reinstalled here. */
|
||
}
|
||
|
||
/* If a UI was in sync execution mode, and now isn't, restore its
|
||
prompt (a synchronous execution command has finished, and we're
|
||
ready for input). */
|
||
all_uis_check_sync_execution_done ();
|
||
|
||
if (cmd_done
|
||
&& exec_done_display_p
|
||
&& (inferior_ptid == null_ptid
|
||
|| inferior_thread ()->state != THREAD_RUNNING))
|
||
printf_unfiltered (_("completed.\n"));
|
||
}
|
||
|
||
/* Record the frame and location we're currently stepping through. */
|
||
void
|
||
set_step_info (struct frame_info *frame, struct symtab_and_line sal)
|
||
{
|
||
struct thread_info *tp = inferior_thread ();
|
||
|
||
tp->control.step_frame_id = get_frame_id (frame);
|
||
tp->control.step_stack_frame_id = get_stack_frame_id (frame);
|
||
|
||
tp->current_symtab = sal.symtab;
|
||
tp->current_line = sal.line;
|
||
}
|
||
|
||
/* Clear context switchable stepping state. */
|
||
|
||
void
|
||
init_thread_stepping_state (struct thread_info *tss)
|
||
{
|
||
tss->stepped_breakpoint = 0;
|
||
tss->stepping_over_breakpoint = 0;
|
||
tss->stepping_over_watchpoint = 0;
|
||
tss->step_after_step_resume_breakpoint = 0;
|
||
}
|
||
|
||
/* Set the cached copy of the last ptid/waitstatus. */
|
||
|
||
void
|
||
set_last_target_status (ptid_t ptid, struct target_waitstatus status)
|
||
{
|
||
target_last_wait_ptid = ptid;
|
||
target_last_waitstatus = status;
|
||
}
|
||
|
||
/* Return the cached copy of the last pid/waitstatus returned by
|
||
target_wait()/deprecated_target_wait_hook(). The data is actually
|
||
cached by handle_inferior_event(), which gets called immediately
|
||
after target_wait()/deprecated_target_wait_hook(). */
|
||
|
||
void
|
||
get_last_target_status (ptid_t *ptidp, struct target_waitstatus *status)
|
||
{
|
||
*ptidp = target_last_wait_ptid;
|
||
*status = target_last_waitstatus;
|
||
}
|
||
|
||
void
|
||
nullify_last_target_wait_ptid (void)
|
||
{
|
||
target_last_wait_ptid = minus_one_ptid;
|
||
}
|
||
|
||
/* Switch thread contexts. */
|
||
|
||
static void
|
||
context_switch (execution_control_state *ecs)
|
||
{
|
||
if (debug_infrun
|
||
&& ecs->ptid != inferior_ptid
|
||
&& ecs->event_thread != inferior_thread ())
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: Switching context from %s ",
|
||
target_pid_to_str (inferior_ptid).c_str ());
|
||
fprintf_unfiltered (gdb_stdlog, "to %s\n",
|
||
target_pid_to_str (ecs->ptid).c_str ());
|
||
}
|
||
|
||
switch_to_thread (ecs->event_thread);
|
||
}
|
||
|
||
/* If the target can't tell whether we've hit breakpoints
|
||
(target_supports_stopped_by_sw_breakpoint), and we got a SIGTRAP,
|
||
check whether that could have been caused by a breakpoint. If so,
|
||
adjust the PC, per gdbarch_decr_pc_after_break. */
|
||
|
||
static void
|
||
adjust_pc_after_break (struct thread_info *thread,
|
||
struct target_waitstatus *ws)
|
||
{
|
||
struct regcache *regcache;
|
||
struct gdbarch *gdbarch;
|
||
CORE_ADDR breakpoint_pc, decr_pc;
|
||
|
||
/* If we've hit a breakpoint, we'll normally be stopped with SIGTRAP. If
|
||
we aren't, just return.
|
||
|
||
We assume that waitkinds other than TARGET_WAITKIND_STOPPED are not
|
||
affected by gdbarch_decr_pc_after_break. Other waitkinds which are
|
||
implemented by software breakpoints should be handled through the normal
|
||
breakpoint layer.
|
||
|
||
NOTE drow/2004-01-31: On some targets, breakpoints may generate
|
||
different signals (SIGILL or SIGEMT for instance), but it is less
|
||
clear where the PC is pointing afterwards. It may not match
|
||
gdbarch_decr_pc_after_break. I don't know any specific target that
|
||
generates these signals at breakpoints (the code has been in GDB since at
|
||
least 1992) so I can not guess how to handle them here.
|
||
|
||
In earlier versions of GDB, a target with
|
||
gdbarch_have_nonsteppable_watchpoint would have the PC after hitting a
|
||
watchpoint affected by gdbarch_decr_pc_after_break. I haven't found any
|
||
target with both of these set in GDB history, and it seems unlikely to be
|
||
correct, so gdbarch_have_nonsteppable_watchpoint is not checked here. */
|
||
|
||
if (ws->kind != TARGET_WAITKIND_STOPPED)
|
||
return;
|
||
|
||
if (ws->value.sig != GDB_SIGNAL_TRAP)
|
||
return;
|
||
|
||
/* In reverse execution, when a breakpoint is hit, the instruction
|
||
under it has already been de-executed. The reported PC always
|
||
points at the breakpoint address, so adjusting it further would
|
||
be wrong. E.g., consider this case on a decr_pc_after_break == 1
|
||
architecture:
|
||
|
||
B1 0x08000000 : INSN1
|
||
B2 0x08000001 : INSN2
|
||
0x08000002 : INSN3
|
||
PC -> 0x08000003 : INSN4
|
||
|
||
Say you're stopped at 0x08000003 as above. Reverse continuing
|
||
from that point should hit B2 as below. Reading the PC when the
|
||
SIGTRAP is reported should read 0x08000001 and INSN2 should have
|
||
been de-executed already.
|
||
|
||
B1 0x08000000 : INSN1
|
||
B2 PC -> 0x08000001 : INSN2
|
||
0x08000002 : INSN3
|
||
0x08000003 : INSN4
|
||
|
||
We can't apply the same logic as for forward execution, because
|
||
we would wrongly adjust the PC to 0x08000000, since there's a
|
||
breakpoint at PC - 1. We'd then report a hit on B1, although
|
||
INSN1 hadn't been de-executed yet. Doing nothing is the correct
|
||
behaviour. */
|
||
if (execution_direction == EXEC_REVERSE)
|
||
return;
|
||
|
||
/* If the target can tell whether the thread hit a SW breakpoint,
|
||
trust it. Targets that can tell also adjust the PC
|
||
themselves. */
|
||
if (target_supports_stopped_by_sw_breakpoint ())
|
||
return;
|
||
|
||
/* Note that relying on whether a breakpoint is planted in memory to
|
||
determine this can fail. E.g,. the breakpoint could have been
|
||
removed since. Or the thread could have been told to step an
|
||
instruction the size of a breakpoint instruction, and only
|
||
_after_ was a breakpoint inserted at its address. */
|
||
|
||
/* If this target does not decrement the PC after breakpoints, then
|
||
we have nothing to do. */
|
||
regcache = get_thread_regcache (thread);
|
||
gdbarch = regcache->arch ();
|
||
|
||
decr_pc = gdbarch_decr_pc_after_break (gdbarch);
|
||
if (decr_pc == 0)
|
||
return;
|
||
|
||
const address_space *aspace = regcache->aspace ();
|
||
|
||
/* Find the location where (if we've hit a breakpoint) the
|
||
breakpoint would be. */
|
||
breakpoint_pc = regcache_read_pc (regcache) - decr_pc;
|
||
|
||
/* If the target can't tell whether a software breakpoint triggered,
|
||
fallback to figuring it out based on breakpoints we think were
|
||
inserted in the target, and on whether the thread was stepped or
|
||
continued. */
|
||
|
||
/* Check whether there actually is a software breakpoint inserted at
|
||
that location.
|
||
|
||
If in non-stop mode, a race condition is possible where we've
|
||
removed a breakpoint, but stop events for that breakpoint were
|
||
already queued and arrive later. To suppress those spurious
|
||
SIGTRAPs, we keep a list of such breakpoint locations for a bit,
|
||
and retire them after a number of stop events are reported. Note
|
||
this is an heuristic and can thus get confused. The real fix is
|
||
to get the "stopped by SW BP and needs adjustment" info out of
|
||
the target/kernel (and thus never reach here; see above). */
|
||
if (software_breakpoint_inserted_here_p (aspace, breakpoint_pc)
|
||
|| (target_is_non_stop_p ()
|
||
&& moribund_breakpoint_here_p (aspace, breakpoint_pc)))
|
||
{
|
||
gdb::optional<scoped_restore_tmpl<int>> restore_operation_disable;
|
||
|
||
if (record_full_is_used ())
|
||
restore_operation_disable.emplace
|
||
(record_full_gdb_operation_disable_set ());
|
||
|
||
/* When using hardware single-step, a SIGTRAP is reported for both
|
||
a completed single-step and a software breakpoint. Need to
|
||
differentiate between the two, as the latter needs adjusting
|
||
but the former does not.
|
||
|
||
The SIGTRAP can be due to a completed hardware single-step only if
|
||
- we didn't insert software single-step breakpoints
|
||
- this thread is currently being stepped
|
||
|
||
If any of these events did not occur, we must have stopped due
|
||
to hitting a software breakpoint, and have to back up to the
|
||
breakpoint address.
|
||
|
||
As a special case, we could have hardware single-stepped a
|
||
software breakpoint. In this case (prev_pc == breakpoint_pc),
|
||
we also need to back up to the breakpoint address. */
|
||
|
||
if (thread_has_single_step_breakpoints_set (thread)
|
||
|| !currently_stepping (thread)
|
||
|| (thread->stepped_breakpoint
|
||
&& thread->prev_pc == breakpoint_pc))
|
||
regcache_write_pc (regcache, breakpoint_pc);
|
||
}
|
||
}
|
||
|
||
static int
|
||
stepped_in_from (struct frame_info *frame, struct frame_id step_frame_id)
|
||
{
|
||
for (frame = get_prev_frame (frame);
|
||
frame != NULL;
|
||
frame = get_prev_frame (frame))
|
||
{
|
||
if (frame_id_eq (get_frame_id (frame), step_frame_id))
|
||
return 1;
|
||
if (get_frame_type (frame) != INLINE_FRAME)
|
||
break;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
/* If the event thread has the stop requested flag set, pretend it
|
||
stopped for a GDB_SIGNAL_0 (i.e., as if it stopped due to
|
||
target_stop). */
|
||
|
||
static bool
|
||
handle_stop_requested (struct execution_control_state *ecs)
|
||
{
|
||
if (ecs->event_thread->stop_requested)
|
||
{
|
||
ecs->ws.kind = TARGET_WAITKIND_STOPPED;
|
||
ecs->ws.value.sig = GDB_SIGNAL_0;
|
||
handle_signal_stop (ecs);
|
||
return true;
|
||
}
|
||
return false;
|
||
}
|
||
|
||
/* Auxiliary function that handles syscall entry/return events.
|
||
It returns 1 if the inferior should keep going (and GDB
|
||
should ignore the event), or 0 if the event deserves to be
|
||
processed. */
|
||
|
||
static int
|
||
handle_syscall_event (struct execution_control_state *ecs)
|
||
{
|
||
struct regcache *regcache;
|
||
int syscall_number;
|
||
|
||
context_switch (ecs);
|
||
|
||
regcache = get_thread_regcache (ecs->event_thread);
|
||
syscall_number = ecs->ws.value.syscall_number;
|
||
ecs->event_thread->suspend.stop_pc = regcache_read_pc (regcache);
|
||
|
||
if (catch_syscall_enabled () > 0
|
||
&& catching_syscall_number (syscall_number) > 0)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: syscall number = '%d'\n",
|
||
syscall_number);
|
||
|
||
ecs->event_thread->control.stop_bpstat
|
||
= bpstat_stop_status (regcache->aspace (),
|
||
ecs->event_thread->suspend.stop_pc,
|
||
ecs->event_thread, &ecs->ws);
|
||
|
||
if (handle_stop_requested (ecs))
|
||
return 0;
|
||
|
||
if (bpstat_causes_stop (ecs->event_thread->control.stop_bpstat))
|
||
{
|
||
/* Catchpoint hit. */
|
||
return 0;
|
||
}
|
||
}
|
||
|
||
if (handle_stop_requested (ecs))
|
||
return 0;
|
||
|
||
/* If no catchpoint triggered for this, then keep going. */
|
||
keep_going (ecs);
|
||
return 1;
|
||
}
|
||
|
||
/* Lazily fill in the execution_control_state's stop_func_* fields. */
|
||
|
||
static void
|
||
fill_in_stop_func (struct gdbarch *gdbarch,
|
||
struct execution_control_state *ecs)
|
||
{
|
||
if (!ecs->stop_func_filled_in)
|
||
{
|
||
/* Don't care about return value; stop_func_start and stop_func_name
|
||
will both be 0 if it doesn't work. */
|
||
find_function_entry_range_from_pc (ecs->event_thread->suspend.stop_pc,
|
||
&ecs->stop_func_name,
|
||
&ecs->stop_func_start,
|
||
&ecs->stop_func_end);
|
||
ecs->stop_func_start
|
||
+= gdbarch_deprecated_function_start_offset (gdbarch);
|
||
|
||
if (gdbarch_skip_entrypoint_p (gdbarch))
|
||
ecs->stop_func_start = gdbarch_skip_entrypoint (gdbarch,
|
||
ecs->stop_func_start);
|
||
|
||
ecs->stop_func_filled_in = 1;
|
||
}
|
||
}
|
||
|
||
|
||
/* Return the STOP_SOON field of the inferior pointed at by ECS. */
|
||
|
||
static enum stop_kind
|
||
get_inferior_stop_soon (execution_control_state *ecs)
|
||
{
|
||
struct inferior *inf = find_inferior_ptid (ecs->ptid);
|
||
|
||
gdb_assert (inf != NULL);
|
||
return inf->control.stop_soon;
|
||
}
|
||
|
||
/* Wait for one event. Store the resulting waitstatus in WS, and
|
||
return the event ptid. */
|
||
|
||
static ptid_t
|
||
wait_one (struct target_waitstatus *ws)
|
||
{
|
||
ptid_t event_ptid;
|
||
ptid_t wait_ptid = minus_one_ptid;
|
||
|
||
overlay_cache_invalid = 1;
|
||
|
||
/* Flush target cache before starting to handle each event.
|
||
Target was running and cache could be stale. This is just a
|
||
heuristic. Running threads may modify target memory, but we
|
||
don't get any event. */
|
||
target_dcache_invalidate ();
|
||
|
||
if (deprecated_target_wait_hook)
|
||
event_ptid = deprecated_target_wait_hook (wait_ptid, ws, 0);
|
||
else
|
||
event_ptid = target_wait (wait_ptid, ws, 0);
|
||
|
||
if (debug_infrun)
|
||
print_target_wait_results (wait_ptid, event_ptid, ws);
|
||
|
||
return event_ptid;
|
||
}
|
||
|
||
/* Generate a wrapper for target_stopped_by_REASON that works on PTID
|
||
instead of the current thread. */
|
||
#define THREAD_STOPPED_BY(REASON) \
|
||
static int \
|
||
thread_stopped_by_ ## REASON (ptid_t ptid) \
|
||
{ \
|
||
scoped_restore save_inferior_ptid = make_scoped_restore (&inferior_ptid); \
|
||
inferior_ptid = ptid; \
|
||
\
|
||
return target_stopped_by_ ## REASON (); \
|
||
}
|
||
|
||
/* Generate thread_stopped_by_watchpoint. */
|
||
THREAD_STOPPED_BY (watchpoint)
|
||
/* Generate thread_stopped_by_sw_breakpoint. */
|
||
THREAD_STOPPED_BY (sw_breakpoint)
|
||
/* Generate thread_stopped_by_hw_breakpoint. */
|
||
THREAD_STOPPED_BY (hw_breakpoint)
|
||
|
||
/* Save the thread's event and stop reason to process it later. */
|
||
|
||
static void
|
||
save_waitstatus (struct thread_info *tp, struct target_waitstatus *ws)
|
||
{
|
||
if (debug_infrun)
|
||
{
|
||
std::string statstr = target_waitstatus_to_string (ws);
|
||
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: saving status %s for %d.%ld.%ld\n",
|
||
statstr.c_str (),
|
||
tp->ptid.pid (),
|
||
tp->ptid.lwp (),
|
||
tp->ptid.tid ());
|
||
}
|
||
|
||
/* Record for later. */
|
||
tp->suspend.waitstatus = *ws;
|
||
tp->suspend.waitstatus_pending_p = 1;
|
||
|
||
struct regcache *regcache = get_thread_regcache (tp);
|
||
const address_space *aspace = regcache->aspace ();
|
||
|
||
if (ws->kind == TARGET_WAITKIND_STOPPED
|
||
&& ws->value.sig == GDB_SIGNAL_TRAP)
|
||
{
|
||
CORE_ADDR pc = regcache_read_pc (regcache);
|
||
|
||
adjust_pc_after_break (tp, &tp->suspend.waitstatus);
|
||
|
||
if (thread_stopped_by_watchpoint (tp->ptid))
|
||
{
|
||
tp->suspend.stop_reason
|
||
= TARGET_STOPPED_BY_WATCHPOINT;
|
||
}
|
||
else if (target_supports_stopped_by_sw_breakpoint ()
|
||
&& thread_stopped_by_sw_breakpoint (tp->ptid))
|
||
{
|
||
tp->suspend.stop_reason
|
||
= TARGET_STOPPED_BY_SW_BREAKPOINT;
|
||
}
|
||
else if (target_supports_stopped_by_hw_breakpoint ()
|
||
&& thread_stopped_by_hw_breakpoint (tp->ptid))
|
||
{
|
||
tp->suspend.stop_reason
|
||
= TARGET_STOPPED_BY_HW_BREAKPOINT;
|
||
}
|
||
else if (!target_supports_stopped_by_hw_breakpoint ()
|
||
&& hardware_breakpoint_inserted_here_p (aspace,
|
||
pc))
|
||
{
|
||
tp->suspend.stop_reason
|
||
= TARGET_STOPPED_BY_HW_BREAKPOINT;
|
||
}
|
||
else if (!target_supports_stopped_by_sw_breakpoint ()
|
||
&& software_breakpoint_inserted_here_p (aspace,
|
||
pc))
|
||
{
|
||
tp->suspend.stop_reason
|
||
= TARGET_STOPPED_BY_SW_BREAKPOINT;
|
||
}
|
||
else if (!thread_has_single_step_breakpoints_set (tp)
|
||
&& currently_stepping (tp))
|
||
{
|
||
tp->suspend.stop_reason
|
||
= TARGET_STOPPED_BY_SINGLE_STEP;
|
||
}
|
||
}
|
||
}
|
||
|
||
/* See infrun.h. */
|
||
|
||
void
|
||
stop_all_threads (void)
|
||
{
|
||
/* We may need multiple passes to discover all threads. */
|
||
int pass;
|
||
int iterations = 0;
|
||
|
||
gdb_assert (target_is_non_stop_p ());
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: stop_all_threads\n");
|
||
|
||
scoped_restore_current_thread restore_thread;
|
||
|
||
target_thread_events (1);
|
||
SCOPE_EXIT { target_thread_events (0); };
|
||
|
||
/* Request threads to stop, and then wait for the stops. Because
|
||
threads we already know about can spawn more threads while we're
|
||
trying to stop them, and we only learn about new threads when we
|
||
update the thread list, do this in a loop, and keep iterating
|
||
until two passes find no threads that need to be stopped. */
|
||
for (pass = 0; pass < 2; pass++, iterations++)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: stop_all_threads, pass=%d, "
|
||
"iterations=%d\n", pass, iterations);
|
||
while (1)
|
||
{
|
||
ptid_t event_ptid;
|
||
struct target_waitstatus ws;
|
||
int need_wait = 0;
|
||
|
||
update_thread_list ();
|
||
|
||
/* Go through all threads looking for threads that we need
|
||
to tell the target to stop. */
|
||
for (thread_info *t : all_non_exited_threads ())
|
||
{
|
||
if (t->executing)
|
||
{
|
||
/* If already stopping, don't request a stop again.
|
||
We just haven't seen the notification yet. */
|
||
if (!t->stop_requested)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: %s executing, "
|
||
"need stop\n",
|
||
target_pid_to_str (t->ptid).c_str ());
|
||
target_stop (t->ptid);
|
||
t->stop_requested = 1;
|
||
}
|
||
else
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: %s executing, "
|
||
"already stopping\n",
|
||
target_pid_to_str (t->ptid).c_str ());
|
||
}
|
||
|
||
if (t->stop_requested)
|
||
need_wait = 1;
|
||
}
|
||
else
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: %s not executing\n",
|
||
target_pid_to_str (t->ptid).c_str ());
|
||
|
||
/* The thread may be not executing, but still be
|
||
resumed with a pending status to process. */
|
||
t->resumed = 0;
|
||
}
|
||
}
|
||
|
||
if (!need_wait)
|
||
break;
|
||
|
||
/* If we find new threads on the second iteration, restart
|
||
over. We want to see two iterations in a row with all
|
||
threads stopped. */
|
||
if (pass > 0)
|
||
pass = -1;
|
||
|
||
event_ptid = wait_one (&ws);
|
||
if (debug_infrun)
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: stop_all_threads %s %s\n",
|
||
target_waitstatus_to_string (&ws).c_str (),
|
||
target_pid_to_str (event_ptid).c_str ());
|
||
}
|
||
|
||
if (ws.kind == TARGET_WAITKIND_NO_RESUMED
|
||
|| ws.kind == TARGET_WAITKIND_THREAD_EXITED
|
||
|| ws.kind == TARGET_WAITKIND_EXITED
|
||
|| ws.kind == TARGET_WAITKIND_SIGNALLED)
|
||
{
|
||
/* All resumed threads exited
|
||
or one thread/process exited/signalled. */
|
||
}
|
||
else
|
||
{
|
||
thread_info *t = find_thread_ptid (event_ptid);
|
||
if (t == NULL)
|
||
t = add_thread (event_ptid);
|
||
|
||
t->stop_requested = 0;
|
||
t->executing = 0;
|
||
t->resumed = 0;
|
||
t->control.may_range_step = 0;
|
||
|
||
/* This may be the first time we see the inferior report
|
||
a stop. */
|
||
inferior *inf = find_inferior_ptid (event_ptid);
|
||
if (inf->needs_setup)
|
||
{
|
||
switch_to_thread_no_regs (t);
|
||
setup_inferior (0);
|
||
}
|
||
|
||
if (ws.kind == TARGET_WAITKIND_STOPPED
|
||
&& ws.value.sig == GDB_SIGNAL_0)
|
||
{
|
||
/* We caught the event that we intended to catch, so
|
||
there's no event pending. */
|
||
t->suspend.waitstatus.kind = TARGET_WAITKIND_IGNORE;
|
||
t->suspend.waitstatus_pending_p = 0;
|
||
|
||
if (displaced_step_fixup (t, GDB_SIGNAL_0) < 0)
|
||
{
|
||
/* Add it back to the step-over queue. */
|
||
if (debug_infrun)
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: displaced-step of %s "
|
||
"canceled: adding back to the "
|
||
"step-over queue\n",
|
||
target_pid_to_str (t->ptid).c_str ());
|
||
}
|
||
t->control.trap_expected = 0;
|
||
thread_step_over_chain_enqueue (t);
|
||
}
|
||
}
|
||
else
|
||
{
|
||
enum gdb_signal sig;
|
||
struct regcache *regcache;
|
||
|
||
if (debug_infrun)
|
||
{
|
||
std::string statstr = target_waitstatus_to_string (&ws);
|
||
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: target_wait %s, saving "
|
||
"status for %d.%ld.%ld\n",
|
||
statstr.c_str (),
|
||
t->ptid.pid (),
|
||
t->ptid.lwp (),
|
||
t->ptid.tid ());
|
||
}
|
||
|
||
/* Record for later. */
|
||
save_waitstatus (t, &ws);
|
||
|
||
sig = (ws.kind == TARGET_WAITKIND_STOPPED
|
||
? ws.value.sig : GDB_SIGNAL_0);
|
||
|
||
if (displaced_step_fixup (t, sig) < 0)
|
||
{
|
||
/* Add it back to the step-over queue. */
|
||
t->control.trap_expected = 0;
|
||
thread_step_over_chain_enqueue (t);
|
||
}
|
||
|
||
regcache = get_thread_regcache (t);
|
||
t->suspend.stop_pc = regcache_read_pc (regcache);
|
||
|
||
if (debug_infrun)
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: saved stop_pc=%s for %s "
|
||
"(currently_stepping=%d)\n",
|
||
paddress (target_gdbarch (),
|
||
t->suspend.stop_pc),
|
||
target_pid_to_str (t->ptid).c_str (),
|
||
currently_stepping (t));
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: stop_all_threads done\n");
|
||
}
|
||
|
||
/* Handle a TARGET_WAITKIND_NO_RESUMED event. */
|
||
|
||
static int
|
||
handle_no_resumed (struct execution_control_state *ecs)
|
||
{
|
||
if (target_can_async_p ())
|
||
{
|
||
struct ui *ui;
|
||
int any_sync = 0;
|
||
|
||
ALL_UIS (ui)
|
||
{
|
||
if (ui->prompt_state == PROMPT_BLOCKED)
|
||
{
|
||
any_sync = 1;
|
||
break;
|
||
}
|
||
}
|
||
if (!any_sync)
|
||
{
|
||
/* There were no unwaited-for children left in the target, but,
|
||
we're not synchronously waiting for events either. Just
|
||
ignore. */
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: TARGET_WAITKIND_NO_RESUMED "
|
||
"(ignoring: bg)\n");
|
||
prepare_to_wait (ecs);
|
||
return 1;
|
||
}
|
||
}
|
||
|
||
/* Otherwise, if we were running a synchronous execution command, we
|
||
may need to cancel it and give the user back the terminal.
|
||
|
||
In non-stop mode, the target can't tell whether we've already
|
||
consumed previous stop events, so it can end up sending us a
|
||
no-resumed event like so:
|
||
|
||
#0 - thread 1 is left stopped
|
||
|
||
#1 - thread 2 is resumed and hits breakpoint
|
||
-> TARGET_WAITKIND_STOPPED
|
||
|
||
#2 - thread 3 is resumed and exits
|
||
this is the last resumed thread, so
|
||
-> TARGET_WAITKIND_NO_RESUMED
|
||
|
||
#3 - gdb processes stop for thread 2 and decides to re-resume
|
||
it.
|
||
|
||
#4 - gdb processes the TARGET_WAITKIND_NO_RESUMED event.
|
||
thread 2 is now resumed, so the event should be ignored.
|
||
|
||
IOW, if the stop for thread 2 doesn't end a foreground command,
|
||
then we need to ignore the following TARGET_WAITKIND_NO_RESUMED
|
||
event. But it could be that the event meant that thread 2 itself
|
||
(or whatever other thread was the last resumed thread) exited.
|
||
|
||
To address this we refresh the thread list and check whether we
|
||
have resumed threads _now_. In the example above, this removes
|
||
thread 3 from the thread list. If thread 2 was re-resumed, we
|
||
ignore this event. If we find no thread resumed, then we cancel
|
||
the synchronous command show "no unwaited-for " to the user. */
|
||
update_thread_list ();
|
||
|
||
for (thread_info *thread : all_non_exited_threads ())
|
||
{
|
||
if (thread->executing
|
||
|| thread->suspend.waitstatus_pending_p)
|
||
{
|
||
/* There were no unwaited-for children left in the target at
|
||
some point, but there are now. Just ignore. */
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: TARGET_WAITKIND_NO_RESUMED "
|
||
"(ignoring: found resumed)\n");
|
||
prepare_to_wait (ecs);
|
||
return 1;
|
||
}
|
||
}
|
||
|
||
/* Note however that we may find no resumed thread because the whole
|
||
process exited meanwhile (thus updating the thread list results
|
||
in an empty thread list). In this case we know we'll be getting
|
||
a process exit event shortly. */
|
||
for (inferior *inf : all_inferiors ())
|
||
{
|
||
if (inf->pid == 0)
|
||
continue;
|
||
|
||
thread_info *thread = any_live_thread_of_inferior (inf);
|
||
if (thread == NULL)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: TARGET_WAITKIND_NO_RESUMED "
|
||
"(expect process exit)\n");
|
||
prepare_to_wait (ecs);
|
||
return 1;
|
||
}
|
||
}
|
||
|
||
/* Go ahead and report the event. */
|
||
return 0;
|
||
}
|
||
|
||
/* Given an execution control state that has been freshly filled in by
|
||
an event from the inferior, figure out what it means and take
|
||
appropriate action.
|
||
|
||
The alternatives are:
|
||
|
||
1) stop_waiting and return; to really stop and return to the
|
||
debugger.
|
||
|
||
2) keep_going and return; to wait for the next event (set
|
||
ecs->event_thread->stepping_over_breakpoint to 1 to single step
|
||
once). */
|
||
|
||
static void
|
||
handle_inferior_event (struct execution_control_state *ecs)
|
||
{
|
||
/* Make sure that all temporary struct value objects that were
|
||
created during the handling of the event get deleted at the
|
||
end. */
|
||
scoped_value_mark free_values;
|
||
|
||
enum stop_kind stop_soon;
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: handle_inferior_event %s\n",
|
||
target_waitstatus_to_string (&ecs->ws).c_str ());
|
||
|
||
if (ecs->ws.kind == TARGET_WAITKIND_IGNORE)
|
||
{
|
||
/* We had an event in the inferior, but we are not interested in
|
||
handling it at this level. The lower layers have already
|
||
done what needs to be done, if anything.
|
||
|
||
One of the possible circumstances for this is when the
|
||
inferior produces output for the console. The inferior has
|
||
not stopped, and we are ignoring the event. Another possible
|
||
circumstance is any event which the lower level knows will be
|
||
reported multiple times without an intervening resume. */
|
||
prepare_to_wait (ecs);
|
||
return;
|
||
}
|
||
|
||
if (ecs->ws.kind == TARGET_WAITKIND_THREAD_EXITED)
|
||
{
|
||
prepare_to_wait (ecs);
|
||
return;
|
||
}
|
||
|
||
if (ecs->ws.kind == TARGET_WAITKIND_NO_RESUMED
|
||
&& handle_no_resumed (ecs))
|
||
return;
|
||
|
||
/* Cache the last pid/waitstatus. */
|
||
set_last_target_status (ecs->ptid, ecs->ws);
|
||
|
||
/* Always clear state belonging to the previous time we stopped. */
|
||
stop_stack_dummy = STOP_NONE;
|
||
|
||
if (ecs->ws.kind == TARGET_WAITKIND_NO_RESUMED)
|
||
{
|
||
/* No unwaited-for children left. IOW, all resumed children
|
||
have exited. */
|
||
stop_print_frame = 0;
|
||
stop_waiting (ecs);
|
||
return;
|
||
}
|
||
|
||
if (ecs->ws.kind != TARGET_WAITKIND_EXITED
|
||
&& ecs->ws.kind != TARGET_WAITKIND_SIGNALLED)
|
||
{
|
||
ecs->event_thread = find_thread_ptid (ecs->ptid);
|
||
/* If it's a new thread, add it to the thread database. */
|
||
if (ecs->event_thread == NULL)
|
||
ecs->event_thread = add_thread (ecs->ptid);
|
||
|
||
/* Disable range stepping. If the next step request could use a
|
||
range, this will be end up re-enabled then. */
|
||
ecs->event_thread->control.may_range_step = 0;
|
||
}
|
||
|
||
/* Dependent on valid ECS->EVENT_THREAD. */
|
||
adjust_pc_after_break (ecs->event_thread, &ecs->ws);
|
||
|
||
/* Dependent on the current PC value modified by adjust_pc_after_break. */
|
||
reinit_frame_cache ();
|
||
|
||
breakpoint_retire_moribund ();
|
||
|
||
/* First, distinguish signals caused by the debugger from signals
|
||
that have to do with the program's own actions. Note that
|
||
breakpoint insns may cause SIGTRAP or SIGILL or SIGEMT, depending
|
||
on the operating system version. Here we detect when a SIGILL or
|
||
SIGEMT is really a breakpoint and change it to SIGTRAP. We do
|
||
something similar for SIGSEGV, since a SIGSEGV will be generated
|
||
when we're trying to execute a breakpoint instruction on a
|
||
non-executable stack. This happens for call dummy breakpoints
|
||
for architectures like SPARC that place call dummies on the
|
||
stack. */
|
||
if (ecs->ws.kind == TARGET_WAITKIND_STOPPED
|
||
&& (ecs->ws.value.sig == GDB_SIGNAL_ILL
|
||
|| ecs->ws.value.sig == GDB_SIGNAL_SEGV
|
||
|| ecs->ws.value.sig == GDB_SIGNAL_EMT))
|
||
{
|
||
struct regcache *regcache = get_thread_regcache (ecs->event_thread);
|
||
|
||
if (breakpoint_inserted_here_p (regcache->aspace (),
|
||
regcache_read_pc (regcache)))
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: Treating signal as SIGTRAP\n");
|
||
ecs->ws.value.sig = GDB_SIGNAL_TRAP;
|
||
}
|
||
}
|
||
|
||
/* Mark the non-executing threads accordingly. In all-stop, all
|
||
threads of all processes are stopped when we get any event
|
||
reported. In non-stop mode, only the event thread stops. */
|
||
{
|
||
ptid_t mark_ptid;
|
||
|
||
if (!target_is_non_stop_p ())
|
||
mark_ptid = minus_one_ptid;
|
||
else if (ecs->ws.kind == TARGET_WAITKIND_SIGNALLED
|
||
|| ecs->ws.kind == TARGET_WAITKIND_EXITED)
|
||
{
|
||
/* If we're handling a process exit in non-stop mode, even
|
||
though threads haven't been deleted yet, one would think
|
||
that there is nothing to do, as threads of the dead process
|
||
will be soon deleted, and threads of any other process were
|
||
left running. However, on some targets, threads survive a
|
||
process exit event. E.g., for the "checkpoint" command,
|
||
when the current checkpoint/fork exits, linux-fork.c
|
||
automatically switches to another fork from within
|
||
target_mourn_inferior, by associating the same
|
||
inferior/thread to another fork. We haven't mourned yet at
|
||
this point, but we must mark any threads left in the
|
||
process as not-executing so that finish_thread_state marks
|
||
them stopped (in the user's perspective) if/when we present
|
||
the stop to the user. */
|
||
mark_ptid = ptid_t (ecs->ptid.pid ());
|
||
}
|
||
else
|
||
mark_ptid = ecs->ptid;
|
||
|
||
set_executing (mark_ptid, 0);
|
||
|
||
/* Likewise the resumed flag. */
|
||
set_resumed (mark_ptid, 0);
|
||
}
|
||
|
||
switch (ecs->ws.kind)
|
||
{
|
||
case TARGET_WAITKIND_LOADED:
|
||
context_switch (ecs);
|
||
/* Ignore gracefully during startup of the inferior, as it might
|
||
be the shell which has just loaded some objects, otherwise
|
||
add the symbols for the newly loaded objects. Also ignore at
|
||
the beginning of an attach or remote session; we will query
|
||
the full list of libraries once the connection is
|
||
established. */
|
||
|
||
stop_soon = get_inferior_stop_soon (ecs);
|
||
if (stop_soon == NO_STOP_QUIETLY)
|
||
{
|
||
struct regcache *regcache;
|
||
|
||
regcache = get_thread_regcache (ecs->event_thread);
|
||
|
||
handle_solib_event ();
|
||
|
||
ecs->event_thread->control.stop_bpstat
|
||
= bpstat_stop_status (regcache->aspace (),
|
||
ecs->event_thread->suspend.stop_pc,
|
||
ecs->event_thread, &ecs->ws);
|
||
|
||
if (handle_stop_requested (ecs))
|
||
return;
|
||
|
||
if (bpstat_causes_stop (ecs->event_thread->control.stop_bpstat))
|
||
{
|
||
/* A catchpoint triggered. */
|
||
process_event_stop_test (ecs);
|
||
return;
|
||
}
|
||
|
||
/* If requested, stop when the dynamic linker notifies
|
||
gdb of events. This allows the user to get control
|
||
and place breakpoints in initializer routines for
|
||
dynamically loaded objects (among other things). */
|
||
ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
|
||
if (stop_on_solib_events)
|
||
{
|
||
/* Make sure we print "Stopped due to solib-event" in
|
||
normal_stop. */
|
||
stop_print_frame = 1;
|
||
|
||
stop_waiting (ecs);
|
||
return;
|
||
}
|
||
}
|
||
|
||
/* If we are skipping through a shell, or through shared library
|
||
loading that we aren't interested in, resume the program. If
|
||
we're running the program normally, also resume. */
|
||
if (stop_soon == STOP_QUIETLY || stop_soon == NO_STOP_QUIETLY)
|
||
{
|
||
/* Loading of shared libraries might have changed breakpoint
|
||
addresses. Make sure new breakpoints are inserted. */
|
||
if (stop_soon == NO_STOP_QUIETLY)
|
||
insert_breakpoints ();
|
||
resume (GDB_SIGNAL_0);
|
||
prepare_to_wait (ecs);
|
||
return;
|
||
}
|
||
|
||
/* But stop if we're attaching or setting up a remote
|
||
connection. */
|
||
if (stop_soon == STOP_QUIETLY_NO_SIGSTOP
|
||
|| stop_soon == STOP_QUIETLY_REMOTE)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: quietly stopped\n");
|
||
stop_waiting (ecs);
|
||
return;
|
||
}
|
||
|
||
internal_error (__FILE__, __LINE__,
|
||
_("unhandled stop_soon: %d"), (int) stop_soon);
|
||
|
||
case TARGET_WAITKIND_SPURIOUS:
|
||
if (handle_stop_requested (ecs))
|
||
return;
|
||
context_switch (ecs);
|
||
resume (GDB_SIGNAL_0);
|
||
prepare_to_wait (ecs);
|
||
return;
|
||
|
||
case TARGET_WAITKIND_THREAD_CREATED:
|
||
if (handle_stop_requested (ecs))
|
||
return;
|
||
context_switch (ecs);
|
||
if (!switch_back_to_stepped_thread (ecs))
|
||
keep_going (ecs);
|
||
return;
|
||
|
||
case TARGET_WAITKIND_EXITED:
|
||
case TARGET_WAITKIND_SIGNALLED:
|
||
inferior_ptid = ecs->ptid;
|
||
set_current_inferior (find_inferior_ptid (ecs->ptid));
|
||
set_current_program_space (current_inferior ()->pspace);
|
||
handle_vfork_child_exec_or_exit (0);
|
||
target_terminal::ours (); /* Must do this before mourn anyway. */
|
||
|
||
/* Clearing any previous state of convenience variables. */
|
||
clear_exit_convenience_vars ();
|
||
|
||
if (ecs->ws.kind == TARGET_WAITKIND_EXITED)
|
||
{
|
||
/* Record the exit code in the convenience variable $_exitcode, so
|
||
that the user can inspect this again later. */
|
||
set_internalvar_integer (lookup_internalvar ("_exitcode"),
|
||
(LONGEST) ecs->ws.value.integer);
|
||
|
||
/* Also record this in the inferior itself. */
|
||
current_inferior ()->has_exit_code = 1;
|
||
current_inferior ()->exit_code = (LONGEST) ecs->ws.value.integer;
|
||
|
||
/* Support the --return-child-result option. */
|
||
return_child_result_value = ecs->ws.value.integer;
|
||
|
||
gdb::observers::exited.notify (ecs->ws.value.integer);
|
||
}
|
||
else
|
||
{
|
||
struct gdbarch *gdbarch = current_inferior ()->gdbarch;
|
||
|
||
if (gdbarch_gdb_signal_to_target_p (gdbarch))
|
||
{
|
||
/* Set the value of the internal variable $_exitsignal,
|
||
which holds the signal uncaught by the inferior. */
|
||
set_internalvar_integer (lookup_internalvar ("_exitsignal"),
|
||
gdbarch_gdb_signal_to_target (gdbarch,
|
||
ecs->ws.value.sig));
|
||
}
|
||
else
|
||
{
|
||
/* We don't have access to the target's method used for
|
||
converting between signal numbers (GDB's internal
|
||
representation <-> target's representation).
|
||
Therefore, we cannot do a good job at displaying this
|
||
information to the user. It's better to just warn
|
||
her about it (if infrun debugging is enabled), and
|
||
give up. */
|
||
if (debug_infrun)
|
||
fprintf_filtered (gdb_stdlog, _("\
|
||
Cannot fill $_exitsignal with the correct signal number.\n"));
|
||
}
|
||
|
||
gdb::observers::signal_exited.notify (ecs->ws.value.sig);
|
||
}
|
||
|
||
gdb_flush (gdb_stdout);
|
||
target_mourn_inferior (inferior_ptid);
|
||
stop_print_frame = 0;
|
||
stop_waiting (ecs);
|
||
return;
|
||
|
||
/* The following are the only cases in which we keep going;
|
||
the above cases end in a continue or goto. */
|
||
case TARGET_WAITKIND_FORKED:
|
||
case TARGET_WAITKIND_VFORKED:
|
||
/* Check whether the inferior is displaced stepping. */
|
||
{
|
||
struct regcache *regcache = get_thread_regcache (ecs->event_thread);
|
||
struct gdbarch *gdbarch = regcache->arch ();
|
||
|
||
/* If checking displaced stepping is supported, and thread
|
||
ecs->ptid is displaced stepping. */
|
||
if (displaced_step_in_progress_thread (ecs->event_thread))
|
||
{
|
||
struct inferior *parent_inf
|
||
= find_inferior_ptid (ecs->ptid);
|
||
struct regcache *child_regcache;
|
||
CORE_ADDR parent_pc;
|
||
|
||
/* GDB has got TARGET_WAITKIND_FORKED or TARGET_WAITKIND_VFORKED,
|
||
indicating that the displaced stepping of syscall instruction
|
||
has been done. Perform cleanup for parent process here. Note
|
||
that this operation also cleans up the child process for vfork,
|
||
because their pages are shared. */
|
||
displaced_step_fixup (ecs->event_thread, GDB_SIGNAL_TRAP);
|
||
/* Start a new step-over in another thread if there's one
|
||
that needs it. */
|
||
start_step_over ();
|
||
|
||
if (ecs->ws.kind == TARGET_WAITKIND_FORKED)
|
||
{
|
||
struct displaced_step_inferior_state *displaced
|
||
= get_displaced_stepping_state (parent_inf);
|
||
|
||
/* Restore scratch pad for child process. */
|
||
displaced_step_restore (displaced, ecs->ws.value.related_pid);
|
||
}
|
||
|
||
/* Since the vfork/fork syscall instruction was executed in the scratchpad,
|
||
the child's PC is also within the scratchpad. Set the child's PC
|
||
to the parent's PC value, which has already been fixed up.
|
||
FIXME: we use the parent's aspace here, although we're touching
|
||
the child, because the child hasn't been added to the inferior
|
||
list yet at this point. */
|
||
|
||
child_regcache
|
||
= get_thread_arch_aspace_regcache (ecs->ws.value.related_pid,
|
||
gdbarch,
|
||
parent_inf->aspace);
|
||
/* Read PC value of parent process. */
|
||
parent_pc = regcache_read_pc (regcache);
|
||
|
||
if (debug_displaced)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"displaced: write child pc from %s to %s\n",
|
||
paddress (gdbarch,
|
||
regcache_read_pc (child_regcache)),
|
||
paddress (gdbarch, parent_pc));
|
||
|
||
regcache_write_pc (child_regcache, parent_pc);
|
||
}
|
||
}
|
||
|
||
context_switch (ecs);
|
||
|
||
/* Immediately detach breakpoints from the child before there's
|
||
any chance of letting the user delete breakpoints from the
|
||
breakpoint lists. If we don't do this early, it's easy to
|
||
leave left over traps in the child, vis: "break foo; catch
|
||
fork; c; <fork>; del; c; <child calls foo>". We only follow
|
||
the fork on the last `continue', and by that time the
|
||
breakpoint at "foo" is long gone from the breakpoint table.
|
||
If we vforked, then we don't need to unpatch here, since both
|
||
parent and child are sharing the same memory pages; we'll
|
||
need to unpatch at follow/detach time instead to be certain
|
||
that new breakpoints added between catchpoint hit time and
|
||
vfork follow are detached. */
|
||
if (ecs->ws.kind != TARGET_WAITKIND_VFORKED)
|
||
{
|
||
/* This won't actually modify the breakpoint list, but will
|
||
physically remove the breakpoints from the child. */
|
||
detach_breakpoints (ecs->ws.value.related_pid);
|
||
}
|
||
|
||
delete_just_stopped_threads_single_step_breakpoints ();
|
||
|
||
/* In case the event is caught by a catchpoint, remember that
|
||
the event is to be followed at the next resume of the thread,
|
||
and not immediately. */
|
||
ecs->event_thread->pending_follow = ecs->ws;
|
||
|
||
ecs->event_thread->suspend.stop_pc
|
||
= regcache_read_pc (get_thread_regcache (ecs->event_thread));
|
||
|
||
ecs->event_thread->control.stop_bpstat
|
||
= bpstat_stop_status (get_current_regcache ()->aspace (),
|
||
ecs->event_thread->suspend.stop_pc,
|
||
ecs->event_thread, &ecs->ws);
|
||
|
||
if (handle_stop_requested (ecs))
|
||
return;
|
||
|
||
/* If no catchpoint triggered for this, then keep going. Note
|
||
that we're interested in knowing the bpstat actually causes a
|
||
stop, not just if it may explain the signal. Software
|
||
watchpoints, for example, always appear in the bpstat. */
|
||
if (!bpstat_causes_stop (ecs->event_thread->control.stop_bpstat))
|
||
{
|
||
int should_resume;
|
||
int follow_child
|
||
= (follow_fork_mode_string == follow_fork_mode_child);
|
||
|
||
ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
|
||
|
||
should_resume = follow_fork ();
|
||
|
||
thread_info *parent = ecs->event_thread;
|
||
thread_info *child = find_thread_ptid (ecs->ws.value.related_pid);
|
||
|
||
/* At this point, the parent is marked running, and the
|
||
child is marked stopped. */
|
||
|
||
/* If not resuming the parent, mark it stopped. */
|
||
if (follow_child && !detach_fork && !non_stop && !sched_multi)
|
||
parent->set_running (false);
|
||
|
||
/* If resuming the child, mark it running. */
|
||
if (follow_child || (!detach_fork && (non_stop || sched_multi)))
|
||
child->set_running (true);
|
||
|
||
/* In non-stop mode, also resume the other branch. */
|
||
if (!detach_fork && (non_stop
|
||
|| (sched_multi && target_is_non_stop_p ())))
|
||
{
|
||
if (follow_child)
|
||
switch_to_thread (parent);
|
||
else
|
||
switch_to_thread (child);
|
||
|
||
ecs->event_thread = inferior_thread ();
|
||
ecs->ptid = inferior_ptid;
|
||
keep_going (ecs);
|
||
}
|
||
|
||
if (follow_child)
|
||
switch_to_thread (child);
|
||
else
|
||
switch_to_thread (parent);
|
||
|
||
ecs->event_thread = inferior_thread ();
|
||
ecs->ptid = inferior_ptid;
|
||
|
||
if (should_resume)
|
||
keep_going (ecs);
|
||
else
|
||
stop_waiting (ecs);
|
||
return;
|
||
}
|
||
process_event_stop_test (ecs);
|
||
return;
|
||
|
||
case TARGET_WAITKIND_VFORK_DONE:
|
||
/* Done with the shared memory region. Re-insert breakpoints in
|
||
the parent, and keep going. */
|
||
|
||
context_switch (ecs);
|
||
|
||
current_inferior ()->waiting_for_vfork_done = 0;
|
||
current_inferior ()->pspace->breakpoints_not_allowed = 0;
|
||
|
||
if (handle_stop_requested (ecs))
|
||
return;
|
||
|
||
/* This also takes care of reinserting breakpoints in the
|
||
previously locked inferior. */
|
||
keep_going (ecs);
|
||
return;
|
||
|
||
case TARGET_WAITKIND_EXECD:
|
||
|
||
/* Note we can't read registers yet (the stop_pc), because we
|
||
don't yet know the inferior's post-exec architecture.
|
||
'stop_pc' is explicitly read below instead. */
|
||
switch_to_thread_no_regs (ecs->event_thread);
|
||
|
||
/* Do whatever is necessary to the parent branch of the vfork. */
|
||
handle_vfork_child_exec_or_exit (1);
|
||
|
||
/* This causes the eventpoints and symbol table to be reset.
|
||
Must do this now, before trying to determine whether to
|
||
stop. */
|
||
follow_exec (inferior_ptid, ecs->ws.value.execd_pathname);
|
||
|
||
/* In follow_exec we may have deleted the original thread and
|
||
created a new one. Make sure that the event thread is the
|
||
execd thread for that case (this is a nop otherwise). */
|
||
ecs->event_thread = inferior_thread ();
|
||
|
||
ecs->event_thread->suspend.stop_pc
|
||
= regcache_read_pc (get_thread_regcache (ecs->event_thread));
|
||
|
||
ecs->event_thread->control.stop_bpstat
|
||
= bpstat_stop_status (get_current_regcache ()->aspace (),
|
||
ecs->event_thread->suspend.stop_pc,
|
||
ecs->event_thread, &ecs->ws);
|
||
|
||
/* Note that this may be referenced from inside
|
||
bpstat_stop_status above, through inferior_has_execd. */
|
||
xfree (ecs->ws.value.execd_pathname);
|
||
ecs->ws.value.execd_pathname = NULL;
|
||
|
||
if (handle_stop_requested (ecs))
|
||
return;
|
||
|
||
/* If no catchpoint triggered for this, then keep going. */
|
||
if (!bpstat_causes_stop (ecs->event_thread->control.stop_bpstat))
|
||
{
|
||
ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
process_event_stop_test (ecs);
|
||
return;
|
||
|
||
/* Be careful not to try to gather much state about a thread
|
||
that's in a syscall. It's frequently a losing proposition. */
|
||
case TARGET_WAITKIND_SYSCALL_ENTRY:
|
||
/* Getting the current syscall number. */
|
||
if (handle_syscall_event (ecs) == 0)
|
||
process_event_stop_test (ecs);
|
||
return;
|
||
|
||
/* Before examining the threads further, step this thread to
|
||
get it entirely out of the syscall. (We get notice of the
|
||
event when the thread is just on the verge of exiting a
|
||
syscall. Stepping one instruction seems to get it back
|
||
into user code.) */
|
||
case TARGET_WAITKIND_SYSCALL_RETURN:
|
||
if (handle_syscall_event (ecs) == 0)
|
||
process_event_stop_test (ecs);
|
||
return;
|
||
|
||
case TARGET_WAITKIND_STOPPED:
|
||
handle_signal_stop (ecs);
|
||
return;
|
||
|
||
case TARGET_WAITKIND_NO_HISTORY:
|
||
/* Reverse execution: target ran out of history info. */
|
||
|
||
/* Switch to the stopped thread. */
|
||
context_switch (ecs);
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n");
|
||
|
||
delete_just_stopped_threads_single_step_breakpoints ();
|
||
ecs->event_thread->suspend.stop_pc
|
||
= regcache_read_pc (get_thread_regcache (inferior_thread ()));
|
||
|
||
if (handle_stop_requested (ecs))
|
||
return;
|
||
|
||
gdb::observers::no_history.notify ();
|
||
stop_waiting (ecs);
|
||
return;
|
||
}
|
||
}
|
||
|
||
/* Restart threads back to what they were trying to do back when we
|
||
paused them for an in-line step-over. The EVENT_THREAD thread is
|
||
ignored. */
|
||
|
||
static void
|
||
restart_threads (struct thread_info *event_thread)
|
||
{
|
||
/* In case the instruction just stepped spawned a new thread. */
|
||
update_thread_list ();
|
||
|
||
for (thread_info *tp : all_non_exited_threads ())
|
||
{
|
||
if (tp == event_thread)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: restart threads: "
|
||
"[%s] is event thread\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
continue;
|
||
}
|
||
|
||
if (!(tp->state == THREAD_RUNNING || tp->control.in_infcall))
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: restart threads: "
|
||
"[%s] not meant to be running\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
continue;
|
||
}
|
||
|
||
if (tp->resumed)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: restart threads: [%s] resumed\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
gdb_assert (tp->executing || tp->suspend.waitstatus_pending_p);
|
||
continue;
|
||
}
|
||
|
||
if (thread_is_in_step_over_chain (tp))
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: restart threads: "
|
||
"[%s] needs step-over\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
gdb_assert (!tp->resumed);
|
||
continue;
|
||
}
|
||
|
||
|
||
if (tp->suspend.waitstatus_pending_p)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: restart threads: "
|
||
"[%s] has pending status\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
tp->resumed = 1;
|
||
continue;
|
||
}
|
||
|
||
gdb_assert (!tp->stop_requested);
|
||
|
||
/* If some thread needs to start a step-over at this point, it
|
||
should still be in the step-over queue, and thus skipped
|
||
above. */
|
||
if (thread_still_needs_step_over (tp))
|
||
{
|
||
internal_error (__FILE__, __LINE__,
|
||
"thread [%s] needs a step-over, but not in "
|
||
"step-over queue\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
}
|
||
|
||
if (currently_stepping (tp))
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: restart threads: [%s] was stepping\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
keep_going_stepped_thread (tp);
|
||
}
|
||
else
|
||
{
|
||
struct execution_control_state ecss;
|
||
struct execution_control_state *ecs = &ecss;
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: restart threads: [%s] continuing\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
reset_ecs (ecs, tp);
|
||
switch_to_thread (tp);
|
||
keep_going_pass_signal (ecs);
|
||
}
|
||
}
|
||
}
|
||
|
||
/* Callback for iterate_over_threads. Find a resumed thread that has
|
||
a pending waitstatus. */
|
||
|
||
static int
|
||
resumed_thread_with_pending_status (struct thread_info *tp,
|
||
void *arg)
|
||
{
|
||
return (tp->resumed
|
||
&& tp->suspend.waitstatus_pending_p);
|
||
}
|
||
|
||
/* Called when we get an event that may finish an in-line or
|
||
out-of-line (displaced stepping) step-over started previously.
|
||
Return true if the event is processed and we should go back to the
|
||
event loop; false if the caller should continue processing the
|
||
event. */
|
||
|
||
static int
|
||
finish_step_over (struct execution_control_state *ecs)
|
||
{
|
||
int had_step_over_info;
|
||
|
||
displaced_step_fixup (ecs->event_thread,
|
||
ecs->event_thread->suspend.stop_signal);
|
||
|
||
had_step_over_info = step_over_info_valid_p ();
|
||
|
||
if (had_step_over_info)
|
||
{
|
||
/* If we're stepping over a breakpoint with all threads locked,
|
||
then only the thread that was stepped should be reporting
|
||
back an event. */
|
||
gdb_assert (ecs->event_thread->control.trap_expected);
|
||
|
||
clear_step_over_info ();
|
||
}
|
||
|
||
if (!target_is_non_stop_p ())
|
||
return 0;
|
||
|
||
/* Start a new step-over in another thread if there's one that
|
||
needs it. */
|
||
start_step_over ();
|
||
|
||
/* If we were stepping over a breakpoint before, and haven't started
|
||
a new in-line step-over sequence, then restart all other threads
|
||
(except the event thread). We can't do this in all-stop, as then
|
||
e.g., we wouldn't be able to issue any other remote packet until
|
||
these other threads stop. */
|
||
if (had_step_over_info && !step_over_info_valid_p ())
|
||
{
|
||
struct thread_info *pending;
|
||
|
||
/* If we only have threads with pending statuses, the restart
|
||
below won't restart any thread and so nothing re-inserts the
|
||
breakpoint we just stepped over. But we need it inserted
|
||
when we later process the pending events, otherwise if
|
||
another thread has a pending event for this breakpoint too,
|
||
we'd discard its event (because the breakpoint that
|
||
originally caused the event was no longer inserted). */
|
||
context_switch (ecs);
|
||
insert_breakpoints ();
|
||
|
||
restart_threads (ecs->event_thread);
|
||
|
||
/* If we have events pending, go through handle_inferior_event
|
||
again, picking up a pending event at random. This avoids
|
||
thread starvation. */
|
||
|
||
/* But not if we just stepped over a watchpoint in order to let
|
||
the instruction execute so we can evaluate its expression.
|
||
The set of watchpoints that triggered is recorded in the
|
||
breakpoint objects themselves (see bp->watchpoint_triggered).
|
||
If we processed another event first, that other event could
|
||
clobber this info. */
|
||
if (ecs->event_thread->stepping_over_watchpoint)
|
||
return 0;
|
||
|
||
pending = iterate_over_threads (resumed_thread_with_pending_status,
|
||
NULL);
|
||
if (pending != NULL)
|
||
{
|
||
struct thread_info *tp = ecs->event_thread;
|
||
struct regcache *regcache;
|
||
|
||
if (debug_infrun)
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: found resumed threads with "
|
||
"pending events, saving status\n");
|
||
}
|
||
|
||
gdb_assert (pending != tp);
|
||
|
||
/* Record the event thread's event for later. */
|
||
save_waitstatus (tp, &ecs->ws);
|
||
/* This was cleared early, by handle_inferior_event. Set it
|
||
so this pending event is considered by
|
||
do_target_wait. */
|
||
tp->resumed = 1;
|
||
|
||
gdb_assert (!tp->executing);
|
||
|
||
regcache = get_thread_regcache (tp);
|
||
tp->suspend.stop_pc = regcache_read_pc (regcache);
|
||
|
||
if (debug_infrun)
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: saved stop_pc=%s for %s "
|
||
"(currently_stepping=%d)\n",
|
||
paddress (target_gdbarch (),
|
||
tp->suspend.stop_pc),
|
||
target_pid_to_str (tp->ptid).c_str (),
|
||
currently_stepping (tp));
|
||
}
|
||
|
||
/* This in-line step-over finished; clear this so we won't
|
||
start a new one. This is what handle_signal_stop would
|
||
do, if we returned false. */
|
||
tp->stepping_over_breakpoint = 0;
|
||
|
||
/* Wake up the event loop again. */
|
||
mark_async_event_handler (infrun_async_inferior_event_token);
|
||
|
||
prepare_to_wait (ecs);
|
||
return 1;
|
||
}
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
/* Come here when the program has stopped with a signal. */
|
||
|
||
static void
|
||
handle_signal_stop (struct execution_control_state *ecs)
|
||
{
|
||
struct frame_info *frame;
|
||
struct gdbarch *gdbarch;
|
||
int stopped_by_watchpoint;
|
||
enum stop_kind stop_soon;
|
||
int random_signal;
|
||
|
||
gdb_assert (ecs->ws.kind == TARGET_WAITKIND_STOPPED);
|
||
|
||
ecs->event_thread->suspend.stop_signal = ecs->ws.value.sig;
|
||
|
||
/* Do we need to clean up the state of a thread that has
|
||
completed a displaced single-step? (Doing so usually affects
|
||
the PC, so do it here, before we set stop_pc.) */
|
||
if (finish_step_over (ecs))
|
||
return;
|
||
|
||
/* If we either finished a single-step or hit a breakpoint, but
|
||
the user wanted this thread to be stopped, pretend we got a
|
||
SIG0 (generic unsignaled stop). */
|
||
if (ecs->event_thread->stop_requested
|
||
&& ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
|
||
ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
|
||
|
||
ecs->event_thread->suspend.stop_pc
|
||
= regcache_read_pc (get_thread_regcache (ecs->event_thread));
|
||
|
||
if (debug_infrun)
|
||
{
|
||
struct regcache *regcache = get_thread_regcache (ecs->event_thread);
|
||
struct gdbarch *reg_gdbarch = regcache->arch ();
|
||
scoped_restore save_inferior_ptid = make_scoped_restore (&inferior_ptid);
|
||
|
||
inferior_ptid = ecs->ptid;
|
||
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: stop_pc = %s\n",
|
||
paddress (reg_gdbarch,
|
||
ecs->event_thread->suspend.stop_pc));
|
||
if (target_stopped_by_watchpoint ())
|
||
{
|
||
CORE_ADDR addr;
|
||
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: stopped by watchpoint\n");
|
||
|
||
if (target_stopped_data_address (current_top_target (), &addr))
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: stopped data address = %s\n",
|
||
paddress (reg_gdbarch, addr));
|
||
else
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: (no data address available)\n");
|
||
}
|
||
}
|
||
|
||
/* This is originated from start_remote(), start_inferior() and
|
||
shared libraries hook functions. */
|
||
stop_soon = get_inferior_stop_soon (ecs);
|
||
if (stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_REMOTE)
|
||
{
|
||
context_switch (ecs);
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: quietly stopped\n");
|
||
stop_print_frame = 1;
|
||
stop_waiting (ecs);
|
||
return;
|
||
}
|
||
|
||
/* This originates from attach_command(). We need to overwrite
|
||
the stop_signal here, because some kernels don't ignore a
|
||
SIGSTOP in a subsequent ptrace(PTRACE_CONT,SIGSTOP) call.
|
||
See more comments in inferior.h. On the other hand, if we
|
||
get a non-SIGSTOP, report it to the user - assume the backend
|
||
will handle the SIGSTOP if it should show up later.
|
||
|
||
Also consider that the attach is complete when we see a
|
||
SIGTRAP. Some systems (e.g. Windows), and stubs supporting
|
||
target extended-remote report it instead of a SIGSTOP
|
||
(e.g. gdbserver). We already rely on SIGTRAP being our
|
||
signal, so this is no exception.
|
||
|
||
Also consider that the attach is complete when we see a
|
||
GDB_SIGNAL_0. In non-stop mode, GDB will explicitly tell
|
||
the target to stop all threads of the inferior, in case the
|
||
low level attach operation doesn't stop them implicitly. If
|
||
they weren't stopped implicitly, then the stub will report a
|
||
GDB_SIGNAL_0, meaning: stopped for no particular reason
|
||
other than GDB's request. */
|
||
if (stop_soon == STOP_QUIETLY_NO_SIGSTOP
|
||
&& (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_STOP
|
||
|| ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
|
||
|| ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_0))
|
||
{
|
||
stop_print_frame = 1;
|
||
stop_waiting (ecs);
|
||
ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
|
||
return;
|
||
}
|
||
|
||
/* See if something interesting happened to the non-current thread. If
|
||
so, then switch to that thread. */
|
||
if (ecs->ptid != inferior_ptid)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: context switch\n");
|
||
|
||
context_switch (ecs);
|
||
|
||
if (deprecated_context_hook)
|
||
deprecated_context_hook (ecs->event_thread->global_num);
|
||
}
|
||
|
||
/* At this point, get hold of the now-current thread's frame. */
|
||
frame = get_current_frame ();
|
||
gdbarch = get_frame_arch (frame);
|
||
|
||
/* Pull the single step breakpoints out of the target. */
|
||
if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
|
||
{
|
||
struct regcache *regcache;
|
||
CORE_ADDR pc;
|
||
|
||
regcache = get_thread_regcache (ecs->event_thread);
|
||
const address_space *aspace = regcache->aspace ();
|
||
|
||
pc = regcache_read_pc (regcache);
|
||
|
||
/* However, before doing so, if this single-step breakpoint was
|
||
actually for another thread, set this thread up for moving
|
||
past it. */
|
||
if (!thread_has_single_step_breakpoint_here (ecs->event_thread,
|
||
aspace, pc))
|
||
{
|
||
if (single_step_breakpoint_inserted_here_p (aspace, pc))
|
||
{
|
||
if (debug_infrun)
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: [%s] hit another thread's "
|
||
"single-step breakpoint\n",
|
||
target_pid_to_str (ecs->ptid).c_str ());
|
||
}
|
||
ecs->hit_singlestep_breakpoint = 1;
|
||
}
|
||
}
|
||
else
|
||
{
|
||
if (debug_infrun)
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: [%s] hit its "
|
||
"single-step breakpoint\n",
|
||
target_pid_to_str (ecs->ptid).c_str ());
|
||
}
|
||
}
|
||
}
|
||
delete_just_stopped_threads_single_step_breakpoints ();
|
||
|
||
if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
|
||
&& ecs->event_thread->control.trap_expected
|
||
&& ecs->event_thread->stepping_over_watchpoint)
|
||
stopped_by_watchpoint = 0;
|
||
else
|
||
stopped_by_watchpoint = watchpoints_triggered (&ecs->ws);
|
||
|
||
/* If necessary, step over this watchpoint. We'll be back to display
|
||
it in a moment. */
|
||
if (stopped_by_watchpoint
|
||
&& (target_have_steppable_watchpoint
|
||
|| gdbarch_have_nonsteppable_watchpoint (gdbarch)))
|
||
{
|
||
/* At this point, we are stopped at an instruction which has
|
||
attempted to write to a piece of memory under control of
|
||
a watchpoint. The instruction hasn't actually executed
|
||
yet. If we were to evaluate the watchpoint expression
|
||
now, we would get the old value, and therefore no change
|
||
would seem to have occurred.
|
||
|
||
In order to make watchpoints work `right', we really need
|
||
to complete the memory write, and then evaluate the
|
||
watchpoint expression. We do this by single-stepping the
|
||
target.
|
||
|
||
It may not be necessary to disable the watchpoint to step over
|
||
it. For example, the PA can (with some kernel cooperation)
|
||
single step over a watchpoint without disabling the watchpoint.
|
||
|
||
It is far more common to need to disable a watchpoint to step
|
||
the inferior over it. If we have non-steppable watchpoints,
|
||
we must disable the current watchpoint; it's simplest to
|
||
disable all watchpoints.
|
||
|
||
Any breakpoint at PC must also be stepped over -- if there's
|
||
one, it will have already triggered before the watchpoint
|
||
triggered, and we either already reported it to the user, or
|
||
it didn't cause a stop and we called keep_going. In either
|
||
case, if there was a breakpoint at PC, we must be trying to
|
||
step past it. */
|
||
ecs->event_thread->stepping_over_watchpoint = 1;
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
|
||
ecs->event_thread->stepping_over_breakpoint = 0;
|
||
ecs->event_thread->stepping_over_watchpoint = 0;
|
||
bpstat_clear (&ecs->event_thread->control.stop_bpstat);
|
||
ecs->event_thread->control.stop_step = 0;
|
||
stop_print_frame = 1;
|
||
stopped_by_random_signal = 0;
|
||
bpstat stop_chain = NULL;
|
||
|
||
/* Hide inlined functions starting here, unless we just performed stepi or
|
||
nexti. After stepi and nexti, always show the innermost frame (not any
|
||
inline function call sites). */
|
||
if (ecs->event_thread->control.step_range_end != 1)
|
||
{
|
||
const address_space *aspace
|
||
= get_thread_regcache (ecs->event_thread)->aspace ();
|
||
|
||
/* skip_inline_frames is expensive, so we avoid it if we can
|
||
determine that the address is one where functions cannot have
|
||
been inlined. This improves performance with inferiors that
|
||
load a lot of shared libraries, because the solib event
|
||
breakpoint is defined as the address of a function (i.e. not
|
||
inline). Note that we have to check the previous PC as well
|
||
as the current one to catch cases when we have just
|
||
single-stepped off a breakpoint prior to reinstating it.
|
||
Note that we're assuming that the code we single-step to is
|
||
not inline, but that's not definitive: there's nothing
|
||
preventing the event breakpoint function from containing
|
||
inlined code, and the single-step ending up there. If the
|
||
user had set a breakpoint on that inlined code, the missing
|
||
skip_inline_frames call would break things. Fortunately
|
||
that's an extremely unlikely scenario. */
|
||
if (!pc_at_non_inline_function (aspace,
|
||
ecs->event_thread->suspend.stop_pc,
|
||
&ecs->ws)
|
||
&& !(ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
|
||
&& ecs->event_thread->control.trap_expected
|
||
&& pc_at_non_inline_function (aspace,
|
||
ecs->event_thread->prev_pc,
|
||
&ecs->ws)))
|
||
{
|
||
stop_chain = build_bpstat_chain (aspace,
|
||
ecs->event_thread->suspend.stop_pc,
|
||
&ecs->ws);
|
||
skip_inline_frames (ecs->event_thread, stop_chain);
|
||
|
||
/* Re-fetch current thread's frame in case that invalidated
|
||
the frame cache. */
|
||
frame = get_current_frame ();
|
||
gdbarch = get_frame_arch (frame);
|
||
}
|
||
}
|
||
|
||
if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
|
||
&& ecs->event_thread->control.trap_expected
|
||
&& gdbarch_single_step_through_delay_p (gdbarch)
|
||
&& currently_stepping (ecs->event_thread))
|
||
{
|
||
/* We're trying to step off a breakpoint. Turns out that we're
|
||
also on an instruction that needs to be stepped multiple
|
||
times before it's been fully executing. E.g., architectures
|
||
with a delay slot. It needs to be stepped twice, once for
|
||
the instruction and once for the delay slot. */
|
||
int step_through_delay
|
||
= gdbarch_single_step_through_delay (gdbarch, frame);
|
||
|
||
if (debug_infrun && step_through_delay)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: step through delay\n");
|
||
if (ecs->event_thread->control.step_range_end == 0
|
||
&& step_through_delay)
|
||
{
|
||
/* The user issued a continue when stopped at a breakpoint.
|
||
Set up for another trap and get out of here. */
|
||
ecs->event_thread->stepping_over_breakpoint = 1;
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
else if (step_through_delay)
|
||
{
|
||
/* The user issued a step when stopped at a breakpoint.
|
||
Maybe we should stop, maybe we should not - the delay
|
||
slot *might* correspond to a line of source. In any
|
||
case, don't decide that here, just set
|
||
ecs->stepping_over_breakpoint, making sure we
|
||
single-step again before breakpoints are re-inserted. */
|
||
ecs->event_thread->stepping_over_breakpoint = 1;
|
||
}
|
||
}
|
||
|
||
/* See if there is a breakpoint/watchpoint/catchpoint/etc. that
|
||
handles this event. */
|
||
ecs->event_thread->control.stop_bpstat
|
||
= bpstat_stop_status (get_current_regcache ()->aspace (),
|
||
ecs->event_thread->suspend.stop_pc,
|
||
ecs->event_thread, &ecs->ws, stop_chain);
|
||
|
||
/* Following in case break condition called a
|
||
function. */
|
||
stop_print_frame = 1;
|
||
|
||
/* This is where we handle "moribund" watchpoints. Unlike
|
||
software breakpoints traps, hardware watchpoint traps are
|
||
always distinguishable from random traps. If no high-level
|
||
watchpoint is associated with the reported stop data address
|
||
anymore, then the bpstat does not explain the signal ---
|
||
simply make sure to ignore it if `stopped_by_watchpoint' is
|
||
set. */
|
||
|
||
if (debug_infrun
|
||
&& ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
|
||
&& !bpstat_explains_signal (ecs->event_thread->control.stop_bpstat,
|
||
GDB_SIGNAL_TRAP)
|
||
&& stopped_by_watchpoint)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: no user watchpoint explains "
|
||
"watchpoint SIGTRAP, ignoring\n");
|
||
|
||
/* NOTE: cagney/2003-03-29: These checks for a random signal
|
||
at one stage in the past included checks for an inferior
|
||
function call's call dummy's return breakpoint. The original
|
||
comment, that went with the test, read:
|
||
|
||
``End of a stack dummy. Some systems (e.g. Sony news) give
|
||
another signal besides SIGTRAP, so check here as well as
|
||
above.''
|
||
|
||
If someone ever tries to get call dummys on a
|
||
non-executable stack to work (where the target would stop
|
||
with something like a SIGSEGV), then those tests might need
|
||
to be re-instated. Given, however, that the tests were only
|
||
enabled when momentary breakpoints were not being used, I
|
||
suspect that it won't be the case.
|
||
|
||
NOTE: kettenis/2004-02-05: Indeed such checks don't seem to
|
||
be necessary for call dummies on a non-executable stack on
|
||
SPARC. */
|
||
|
||
/* See if the breakpoints module can explain the signal. */
|
||
random_signal
|
||
= !bpstat_explains_signal (ecs->event_thread->control.stop_bpstat,
|
||
ecs->event_thread->suspend.stop_signal);
|
||
|
||
/* Maybe this was a trap for a software breakpoint that has since
|
||
been removed. */
|
||
if (random_signal && target_stopped_by_sw_breakpoint ())
|
||
{
|
||
if (program_breakpoint_here_p (gdbarch,
|
||
ecs->event_thread->suspend.stop_pc))
|
||
{
|
||
struct regcache *regcache;
|
||
int decr_pc;
|
||
|
||
/* Re-adjust PC to what the program would see if GDB was not
|
||
debugging it. */
|
||
regcache = get_thread_regcache (ecs->event_thread);
|
||
decr_pc = gdbarch_decr_pc_after_break (gdbarch);
|
||
if (decr_pc != 0)
|
||
{
|
||
gdb::optional<scoped_restore_tmpl<int>>
|
||
restore_operation_disable;
|
||
|
||
if (record_full_is_used ())
|
||
restore_operation_disable.emplace
|
||
(record_full_gdb_operation_disable_set ());
|
||
|
||
regcache_write_pc (regcache,
|
||
ecs->event_thread->suspend.stop_pc + decr_pc);
|
||
}
|
||
}
|
||
else
|
||
{
|
||
/* A delayed software breakpoint event. Ignore the trap. */
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: delayed software breakpoint "
|
||
"trap, ignoring\n");
|
||
random_signal = 0;
|
||
}
|
||
}
|
||
|
||
/* Maybe this was a trap for a hardware breakpoint/watchpoint that
|
||
has since been removed. */
|
||
if (random_signal && target_stopped_by_hw_breakpoint ())
|
||
{
|
||
/* A delayed hardware breakpoint event. Ignore the trap. */
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: delayed hardware breakpoint/watchpoint "
|
||
"trap, ignoring\n");
|
||
random_signal = 0;
|
||
}
|
||
|
||
/* If not, perhaps stepping/nexting can. */
|
||
if (random_signal)
|
||
random_signal = !(ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
|
||
&& currently_stepping (ecs->event_thread));
|
||
|
||
/* Perhaps the thread hit a single-step breakpoint of _another_
|
||
thread. Single-step breakpoints are transparent to the
|
||
breakpoints module. */
|
||
if (random_signal)
|
||
random_signal = !ecs->hit_singlestep_breakpoint;
|
||
|
||
/* No? Perhaps we got a moribund watchpoint. */
|
||
if (random_signal)
|
||
random_signal = !stopped_by_watchpoint;
|
||
|
||
/* Always stop if the user explicitly requested this thread to
|
||
remain stopped. */
|
||
if (ecs->event_thread->stop_requested)
|
||
{
|
||
random_signal = 1;
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: user-requested stop\n");
|
||
}
|
||
|
||
/* For the program's own signals, act according to
|
||
the signal handling tables. */
|
||
|
||
if (random_signal)
|
||
{
|
||
/* Signal not for debugging purposes. */
|
||
struct inferior *inf = find_inferior_ptid (ecs->ptid);
|
||
enum gdb_signal stop_signal = ecs->event_thread->suspend.stop_signal;
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: random signal (%s)\n",
|
||
gdb_signal_to_symbol_string (stop_signal));
|
||
|
||
stopped_by_random_signal = 1;
|
||
|
||
/* Always stop on signals if we're either just gaining control
|
||
of the program, or the user explicitly requested this thread
|
||
to remain stopped. */
|
||
if (stop_soon != NO_STOP_QUIETLY
|
||
|| ecs->event_thread->stop_requested
|
||
|| (!inf->detaching
|
||
&& signal_stop_state (ecs->event_thread->suspend.stop_signal)))
|
||
{
|
||
stop_waiting (ecs);
|
||
return;
|
||
}
|
||
|
||
/* Notify observers the signal has "handle print" set. Note we
|
||
returned early above if stopping; normal_stop handles the
|
||
printing in that case. */
|
||
if (signal_print[ecs->event_thread->suspend.stop_signal])
|
||
{
|
||
/* The signal table tells us to print about this signal. */
|
||
target_terminal::ours_for_output ();
|
||
gdb::observers::signal_received.notify (ecs->event_thread->suspend.stop_signal);
|
||
target_terminal::inferior ();
|
||
}
|
||
|
||
/* Clear the signal if it should not be passed. */
|
||
if (signal_program[ecs->event_thread->suspend.stop_signal] == 0)
|
||
ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
|
||
|
||
if (ecs->event_thread->prev_pc == ecs->event_thread->suspend.stop_pc
|
||
&& ecs->event_thread->control.trap_expected
|
||
&& ecs->event_thread->control.step_resume_breakpoint == NULL)
|
||
{
|
||
/* We were just starting a new sequence, attempting to
|
||
single-step off of a breakpoint and expecting a SIGTRAP.
|
||
Instead this signal arrives. This signal will take us out
|
||
of the stepping range so GDB needs to remember to, when
|
||
the signal handler returns, resume stepping off that
|
||
breakpoint. */
|
||
/* To simplify things, "continue" is forced to use the same
|
||
code paths as single-step - set a breakpoint at the
|
||
signal return address and then, once hit, step off that
|
||
breakpoint. */
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: signal arrived while stepping over "
|
||
"breakpoint\n");
|
||
|
||
insert_hp_step_resume_breakpoint_at_frame (frame);
|
||
ecs->event_thread->step_after_step_resume_breakpoint = 1;
|
||
/* Reset trap_expected to ensure breakpoints are re-inserted. */
|
||
ecs->event_thread->control.trap_expected = 0;
|
||
|
||
/* If we were nexting/stepping some other thread, switch to
|
||
it, so that we don't continue it, losing control. */
|
||
if (!switch_back_to_stepped_thread (ecs))
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
|
||
if (ecs->event_thread->suspend.stop_signal != GDB_SIGNAL_0
|
||
&& (pc_in_thread_step_range (ecs->event_thread->suspend.stop_pc,
|
||
ecs->event_thread)
|
||
|| ecs->event_thread->control.step_range_end == 1)
|
||
&& frame_id_eq (get_stack_frame_id (frame),
|
||
ecs->event_thread->control.step_stack_frame_id)
|
||
&& ecs->event_thread->control.step_resume_breakpoint == NULL)
|
||
{
|
||
/* The inferior is about to take a signal that will take it
|
||
out of the single step range. Set a breakpoint at the
|
||
current PC (which is presumably where the signal handler
|
||
will eventually return) and then allow the inferior to
|
||
run free.
|
||
|
||
Note that this is only needed for a signal delivered
|
||
while in the single-step range. Nested signals aren't a
|
||
problem as they eventually all return. */
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: signal may take us out of "
|
||
"single-step range\n");
|
||
|
||
clear_step_over_info ();
|
||
insert_hp_step_resume_breakpoint_at_frame (frame);
|
||
ecs->event_thread->step_after_step_resume_breakpoint = 1;
|
||
/* Reset trap_expected to ensure breakpoints are re-inserted. */
|
||
ecs->event_thread->control.trap_expected = 0;
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
|
||
/* Note: step_resume_breakpoint may be non-NULL. This occures
|
||
when either there's a nested signal, or when there's a
|
||
pending signal enabled just as the signal handler returns
|
||
(leaving the inferior at the step-resume-breakpoint without
|
||
actually executing it). Either way continue until the
|
||
breakpoint is really hit. */
|
||
|
||
if (!switch_back_to_stepped_thread (ecs))
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: random signal, keep going\n");
|
||
|
||
keep_going (ecs);
|
||
}
|
||
return;
|
||
}
|
||
|
||
process_event_stop_test (ecs);
|
||
}
|
||
|
||
/* Come here when we've got some debug event / signal we can explain
|
||
(IOW, not a random signal), and test whether it should cause a
|
||
stop, or whether we should resume the inferior (transparently).
|
||
E.g., could be a breakpoint whose condition evaluates false; we
|
||
could be still stepping within the line; etc. */
|
||
|
||
static void
|
||
process_event_stop_test (struct execution_control_state *ecs)
|
||
{
|
||
struct symtab_and_line stop_pc_sal;
|
||
struct frame_info *frame;
|
||
struct gdbarch *gdbarch;
|
||
CORE_ADDR jmp_buf_pc;
|
||
struct bpstat_what what;
|
||
|
||
/* Handle cases caused by hitting a breakpoint. */
|
||
|
||
frame = get_current_frame ();
|
||
gdbarch = get_frame_arch (frame);
|
||
|
||
what = bpstat_what (ecs->event_thread->control.stop_bpstat);
|
||
|
||
if (what.call_dummy)
|
||
{
|
||
stop_stack_dummy = what.call_dummy;
|
||
}
|
||
|
||
/* A few breakpoint types have callbacks associated (e.g.,
|
||
bp_jit_event). Run them now. */
|
||
bpstat_run_callbacks (ecs->event_thread->control.stop_bpstat);
|
||
|
||
/* If we hit an internal event that triggers symbol changes, the
|
||
current frame will be invalidated within bpstat_what (e.g., if we
|
||
hit an internal solib event). Re-fetch it. */
|
||
frame = get_current_frame ();
|
||
gdbarch = get_frame_arch (frame);
|
||
|
||
switch (what.main_action)
|
||
{
|
||
case BPSTAT_WHAT_SET_LONGJMP_RESUME:
|
||
/* If we hit the breakpoint at longjmp while stepping, we
|
||
install a momentary breakpoint at the target of the
|
||
jmp_buf. */
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME\n");
|
||
|
||
ecs->event_thread->stepping_over_breakpoint = 1;
|
||
|
||
if (what.is_longjmp)
|
||
{
|
||
struct value *arg_value;
|
||
|
||
/* If we set the longjmp breakpoint via a SystemTap probe,
|
||
then use it to extract the arguments. The destination PC
|
||
is the third argument to the probe. */
|
||
arg_value = probe_safe_evaluate_at_pc (frame, 2);
|
||
if (arg_value)
|
||
{
|
||
jmp_buf_pc = value_as_address (arg_value);
|
||
jmp_buf_pc = gdbarch_addr_bits_remove (gdbarch, jmp_buf_pc);
|
||
}
|
||
else if (!gdbarch_get_longjmp_target_p (gdbarch)
|
||
|| !gdbarch_get_longjmp_target (gdbarch,
|
||
frame, &jmp_buf_pc))
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME "
|
||
"(!gdbarch_get_longjmp_target)\n");
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
|
||
/* Insert a breakpoint at resume address. */
|
||
insert_longjmp_resume_breakpoint (gdbarch, jmp_buf_pc);
|
||
}
|
||
else
|
||
check_exception_resume (ecs, frame);
|
||
keep_going (ecs);
|
||
return;
|
||
|
||
case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
|
||
{
|
||
struct frame_info *init_frame;
|
||
|
||
/* There are several cases to consider.
|
||
|
||
1. The initiating frame no longer exists. In this case we
|
||
must stop, because the exception or longjmp has gone too
|
||
far.
|
||
|
||
2. The initiating frame exists, and is the same as the
|
||
current frame. We stop, because the exception or longjmp
|
||
has been caught.
|
||
|
||
3. The initiating frame exists and is different from the
|
||
current frame. This means the exception or longjmp has
|
||
been caught beneath the initiating frame, so keep going.
|
||
|
||
4. longjmp breakpoint has been placed just to protect
|
||
against stale dummy frames and user is not interested in
|
||
stopping around longjmps. */
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME\n");
|
||
|
||
gdb_assert (ecs->event_thread->control.exception_resume_breakpoint
|
||
!= NULL);
|
||
delete_exception_resume_breakpoint (ecs->event_thread);
|
||
|
||
if (what.is_longjmp)
|
||
{
|
||
check_longjmp_breakpoint_for_call_dummy (ecs->event_thread);
|
||
|
||
if (!frame_id_p (ecs->event_thread->initiating_frame))
|
||
{
|
||
/* Case 4. */
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
}
|
||
|
||
init_frame = frame_find_by_id (ecs->event_thread->initiating_frame);
|
||
|
||
if (init_frame)
|
||
{
|
||
struct frame_id current_id
|
||
= get_frame_id (get_current_frame ());
|
||
if (frame_id_eq (current_id,
|
||
ecs->event_thread->initiating_frame))
|
||
{
|
||
/* Case 2. Fall through. */
|
||
}
|
||
else
|
||
{
|
||
/* Case 3. */
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
}
|
||
|
||
/* For Cases 1 and 2, remove the step-resume breakpoint, if it
|
||
exists. */
|
||
delete_step_resume_breakpoint (ecs->event_thread);
|
||
|
||
end_stepping_range (ecs);
|
||
}
|
||
return;
|
||
|
||
case BPSTAT_WHAT_SINGLE:
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SINGLE\n");
|
||
ecs->event_thread->stepping_over_breakpoint = 1;
|
||
/* Still need to check other stuff, at least the case where we
|
||
are stepping and step out of the right range. */
|
||
break;
|
||
|
||
case BPSTAT_WHAT_STEP_RESUME:
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STEP_RESUME\n");
|
||
|
||
delete_step_resume_breakpoint (ecs->event_thread);
|
||
if (ecs->event_thread->control.proceed_to_finish
|
||
&& execution_direction == EXEC_REVERSE)
|
||
{
|
||
struct thread_info *tp = ecs->event_thread;
|
||
|
||
/* We are finishing a function in reverse, and just hit the
|
||
step-resume breakpoint at the start address of the
|
||
function, and we're almost there -- just need to back up
|
||
by one more single-step, which should take us back to the
|
||
function call. */
|
||
tp->control.step_range_start = tp->control.step_range_end = 1;
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
fill_in_stop_func (gdbarch, ecs);
|
||
if (ecs->event_thread->suspend.stop_pc == ecs->stop_func_start
|
||
&& execution_direction == EXEC_REVERSE)
|
||
{
|
||
/* We are stepping over a function call in reverse, and just
|
||
hit the step-resume breakpoint at the start address of
|
||
the function. Go back to single-stepping, which should
|
||
take us back to the function call. */
|
||
ecs->event_thread->stepping_over_breakpoint = 1;
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
break;
|
||
|
||
case BPSTAT_WHAT_STOP_NOISY:
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_NOISY\n");
|
||
stop_print_frame = 1;
|
||
|
||
/* Assume the thread stopped for a breapoint. We'll still check
|
||
whether a/the breakpoint is there when the thread is next
|
||
resumed. */
|
||
ecs->event_thread->stepping_over_breakpoint = 1;
|
||
|
||
stop_waiting (ecs);
|
||
return;
|
||
|
||
case BPSTAT_WHAT_STOP_SILENT:
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_SILENT\n");
|
||
stop_print_frame = 0;
|
||
|
||
/* Assume the thread stopped for a breapoint. We'll still check
|
||
whether a/the breakpoint is there when the thread is next
|
||
resumed. */
|
||
ecs->event_thread->stepping_over_breakpoint = 1;
|
||
stop_waiting (ecs);
|
||
return;
|
||
|
||
case BPSTAT_WHAT_HP_STEP_RESUME:
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_HP_STEP_RESUME\n");
|
||
|
||
delete_step_resume_breakpoint (ecs->event_thread);
|
||
if (ecs->event_thread->step_after_step_resume_breakpoint)
|
||
{
|
||
/* Back when the step-resume breakpoint was inserted, we
|
||
were trying to single-step off a breakpoint. Go back to
|
||
doing that. */
|
||
ecs->event_thread->step_after_step_resume_breakpoint = 0;
|
||
ecs->event_thread->stepping_over_breakpoint = 1;
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
break;
|
||
|
||
case BPSTAT_WHAT_KEEP_CHECKING:
|
||
break;
|
||
}
|
||
|
||
/* If we stepped a permanent breakpoint and we had a high priority
|
||
step-resume breakpoint for the address we stepped, but we didn't
|
||
hit it, then we must have stepped into the signal handler. The
|
||
step-resume was only necessary to catch the case of _not_
|
||
stepping into the handler, so delete it, and fall through to
|
||
checking whether the step finished. */
|
||
if (ecs->event_thread->stepped_breakpoint)
|
||
{
|
||
struct breakpoint *sr_bp
|
||
= ecs->event_thread->control.step_resume_breakpoint;
|
||
|
||
if (sr_bp != NULL
|
||
&& sr_bp->loc->permanent
|
||
&& sr_bp->type == bp_hp_step_resume
|
||
&& sr_bp->loc->address == ecs->event_thread->prev_pc)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: stepped permanent breakpoint, stopped in "
|
||
"handler\n");
|
||
delete_step_resume_breakpoint (ecs->event_thread);
|
||
ecs->event_thread->step_after_step_resume_breakpoint = 0;
|
||
}
|
||
}
|
||
|
||
/* We come here if we hit a breakpoint but should not stop for it.
|
||
Possibly we also were stepping and should stop for that. So fall
|
||
through and test for stepping. But, if not stepping, do not
|
||
stop. */
|
||
|
||
/* In all-stop mode, if we're currently stepping but have stopped in
|
||
some other thread, we need to switch back to the stepped thread. */
|
||
if (switch_back_to_stepped_thread (ecs))
|
||
return;
|
||
|
||
if (ecs->event_thread->control.step_resume_breakpoint)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: step-resume breakpoint is inserted\n");
|
||
|
||
/* Having a step-resume breakpoint overrides anything
|
||
else having to do with stepping commands until
|
||
that breakpoint is reached. */
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
|
||
if (ecs->event_thread->control.step_range_end == 0)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: no stepping, continue\n");
|
||
/* Likewise if we aren't even stepping. */
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
|
||
/* Re-fetch current thread's frame in case the code above caused
|
||
the frame cache to be re-initialized, making our FRAME variable
|
||
a dangling pointer. */
|
||
frame = get_current_frame ();
|
||
gdbarch = get_frame_arch (frame);
|
||
fill_in_stop_func (gdbarch, ecs);
|
||
|
||
/* If stepping through a line, keep going if still within it.
|
||
|
||
Note that step_range_end is the address of the first instruction
|
||
beyond the step range, and NOT the address of the last instruction
|
||
within it!
|
||
|
||
Note also that during reverse execution, we may be stepping
|
||
through a function epilogue and therefore must detect when
|
||
the current-frame changes in the middle of a line. */
|
||
|
||
if (pc_in_thread_step_range (ecs->event_thread->suspend.stop_pc,
|
||
ecs->event_thread)
|
||
&& (execution_direction != EXEC_REVERSE
|
||
|| frame_id_eq (get_frame_id (frame),
|
||
ecs->event_thread->control.step_frame_id)))
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered
|
||
(gdb_stdlog, "infrun: stepping inside range [%s-%s]\n",
|
||
paddress (gdbarch, ecs->event_thread->control.step_range_start),
|
||
paddress (gdbarch, ecs->event_thread->control.step_range_end));
|
||
|
||
/* Tentatively re-enable range stepping; `resume' disables it if
|
||
necessary (e.g., if we're stepping over a breakpoint or we
|
||
have software watchpoints). */
|
||
ecs->event_thread->control.may_range_step = 1;
|
||
|
||
/* When stepping backward, stop at beginning of line range
|
||
(unless it's the function entry point, in which case
|
||
keep going back to the call point). */
|
||
CORE_ADDR stop_pc = ecs->event_thread->suspend.stop_pc;
|
||
if (stop_pc == ecs->event_thread->control.step_range_start
|
||
&& stop_pc != ecs->stop_func_start
|
||
&& execution_direction == EXEC_REVERSE)
|
||
end_stepping_range (ecs);
|
||
else
|
||
keep_going (ecs);
|
||
|
||
return;
|
||
}
|
||
|
||
/* We stepped out of the stepping range. */
|
||
|
||
/* If we are stepping at the source level and entered the runtime
|
||
loader dynamic symbol resolution code...
|
||
|
||
EXEC_FORWARD: we keep on single stepping until we exit the run
|
||
time loader code and reach the callee's address.
|
||
|
||
EXEC_REVERSE: we've already executed the callee (backward), and
|
||
the runtime loader code is handled just like any other
|
||
undebuggable function call. Now we need only keep stepping
|
||
backward through the trampoline code, and that's handled further
|
||
down, so there is nothing for us to do here. */
|
||
|
||
if (execution_direction != EXEC_REVERSE
|
||
&& ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE
|
||
&& in_solib_dynsym_resolve_code (ecs->event_thread->suspend.stop_pc))
|
||
{
|
||
CORE_ADDR pc_after_resolver =
|
||
gdbarch_skip_solib_resolver (gdbarch,
|
||
ecs->event_thread->suspend.stop_pc);
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: stepped into dynsym resolve code\n");
|
||
|
||
if (pc_after_resolver)
|
||
{
|
||
/* Set up a step-resume breakpoint at the address
|
||
indicated by SKIP_SOLIB_RESOLVER. */
|
||
symtab_and_line sr_sal;
|
||
sr_sal.pc = pc_after_resolver;
|
||
sr_sal.pspace = get_frame_program_space (frame);
|
||
|
||
insert_step_resume_breakpoint_at_sal (gdbarch,
|
||
sr_sal, null_frame_id);
|
||
}
|
||
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
|
||
/* Step through an indirect branch thunk. */
|
||
if (ecs->event_thread->control.step_over_calls != STEP_OVER_NONE
|
||
&& gdbarch_in_indirect_branch_thunk (gdbarch,
|
||
ecs->event_thread->suspend.stop_pc))
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: stepped into indirect branch thunk\n");
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
|
||
if (ecs->event_thread->control.step_range_end != 1
|
||
&& (ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE
|
||
|| ecs->event_thread->control.step_over_calls == STEP_OVER_ALL)
|
||
&& get_frame_type (frame) == SIGTRAMP_FRAME)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: stepped into signal trampoline\n");
|
||
/* The inferior, while doing a "step" or "next", has ended up in
|
||
a signal trampoline (either by a signal being delivered or by
|
||
the signal handler returning). Just single-step until the
|
||
inferior leaves the trampoline (either by calling the handler
|
||
or returning). */
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
|
||
/* If we're in the return path from a shared library trampoline,
|
||
we want to proceed through the trampoline when stepping. */
|
||
/* macro/2012-04-25: This needs to come before the subroutine
|
||
call check below as on some targets return trampolines look
|
||
like subroutine calls (MIPS16 return thunks). */
|
||
if (gdbarch_in_solib_return_trampoline (gdbarch,
|
||
ecs->event_thread->suspend.stop_pc,
|
||
ecs->stop_func_name)
|
||
&& ecs->event_thread->control.step_over_calls != STEP_OVER_NONE)
|
||
{
|
||
/* Determine where this trampoline returns. */
|
||
CORE_ADDR stop_pc = ecs->event_thread->suspend.stop_pc;
|
||
CORE_ADDR real_stop_pc
|
||
= gdbarch_skip_trampoline_code (gdbarch, frame, stop_pc);
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: stepped into solib return tramp\n");
|
||
|
||
/* Only proceed through if we know where it's going. */
|
||
if (real_stop_pc)
|
||
{
|
||
/* And put the step-breakpoint there and go until there. */
|
||
symtab_and_line sr_sal;
|
||
sr_sal.pc = real_stop_pc;
|
||
sr_sal.section = find_pc_overlay (sr_sal.pc);
|
||
sr_sal.pspace = get_frame_program_space (frame);
|
||
|
||
/* Do not specify what the fp should be when we stop since
|
||
on some machines the prologue is where the new fp value
|
||
is established. */
|
||
insert_step_resume_breakpoint_at_sal (gdbarch,
|
||
sr_sal, null_frame_id);
|
||
|
||
/* Restart without fiddling with the step ranges or
|
||
other state. */
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
}
|
||
|
||
/* Check for subroutine calls. The check for the current frame
|
||
equalling the step ID is not necessary - the check of the
|
||
previous frame's ID is sufficient - but it is a common case and
|
||
cheaper than checking the previous frame's ID.
|
||
|
||
NOTE: frame_id_eq will never report two invalid frame IDs as
|
||
being equal, so to get into this block, both the current and
|
||
previous frame must have valid frame IDs. */
|
||
/* The outer_frame_id check is a heuristic to detect stepping
|
||
through startup code. If we step over an instruction which
|
||
sets the stack pointer from an invalid value to a valid value,
|
||
we may detect that as a subroutine call from the mythical
|
||
"outermost" function. This could be fixed by marking
|
||
outermost frames as !stack_p,code_p,special_p. Then the
|
||
initial outermost frame, before sp was valid, would
|
||
have code_addr == &_start. See the comment in frame_id_eq
|
||
for more. */
|
||
if (!frame_id_eq (get_stack_frame_id (frame),
|
||
ecs->event_thread->control.step_stack_frame_id)
|
||
&& (frame_id_eq (frame_unwind_caller_id (get_current_frame ()),
|
||
ecs->event_thread->control.step_stack_frame_id)
|
||
&& (!frame_id_eq (ecs->event_thread->control.step_stack_frame_id,
|
||
outer_frame_id)
|
||
|| (ecs->event_thread->control.step_start_function
|
||
!= find_pc_function (ecs->event_thread->suspend.stop_pc)))))
|
||
{
|
||
CORE_ADDR stop_pc = ecs->event_thread->suspend.stop_pc;
|
||
CORE_ADDR real_stop_pc;
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: stepped into subroutine\n");
|
||
|
||
if (ecs->event_thread->control.step_over_calls == STEP_OVER_NONE)
|
||
{
|
||
/* I presume that step_over_calls is only 0 when we're
|
||
supposed to be stepping at the assembly language level
|
||
("stepi"). Just stop. */
|
||
/* And this works the same backward as frontward. MVS */
|
||
end_stepping_range (ecs);
|
||
return;
|
||
}
|
||
|
||
/* Reverse stepping through solib trampolines. */
|
||
|
||
if (execution_direction == EXEC_REVERSE
|
||
&& ecs->event_thread->control.step_over_calls != STEP_OVER_NONE
|
||
&& (gdbarch_skip_trampoline_code (gdbarch, frame, stop_pc)
|
||
|| (ecs->stop_func_start == 0
|
||
&& in_solib_dynsym_resolve_code (stop_pc))))
|
||
{
|
||
/* Any solib trampoline code can be handled in reverse
|
||
by simply continuing to single-step. We have already
|
||
executed the solib function (backwards), and a few
|
||
steps will take us back through the trampoline to the
|
||
caller. */
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
|
||
if (ecs->event_thread->control.step_over_calls == STEP_OVER_ALL)
|
||
{
|
||
/* We're doing a "next".
|
||
|
||
Normal (forward) execution: set a breakpoint at the
|
||
callee's return address (the address at which the caller
|
||
will resume).
|
||
|
||
Reverse (backward) execution. set the step-resume
|
||
breakpoint at the start of the function that we just
|
||
stepped into (backwards), and continue to there. When we
|
||
get there, we'll need to single-step back to the caller. */
|
||
|
||
if (execution_direction == EXEC_REVERSE)
|
||
{
|
||
/* If we're already at the start of the function, we've either
|
||
just stepped backward into a single instruction function,
|
||
or stepped back out of a signal handler to the first instruction
|
||
of the function. Just keep going, which will single-step back
|
||
to the caller. */
|
||
if (ecs->stop_func_start != stop_pc && ecs->stop_func_start != 0)
|
||
{
|
||
/* Normal function call return (static or dynamic). */
|
||
symtab_and_line sr_sal;
|
||
sr_sal.pc = ecs->stop_func_start;
|
||
sr_sal.pspace = get_frame_program_space (frame);
|
||
insert_step_resume_breakpoint_at_sal (gdbarch,
|
||
sr_sal, null_frame_id);
|
||
}
|
||
}
|
||
else
|
||
insert_step_resume_breakpoint_at_caller (frame);
|
||
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
|
||
/* If we are in a function call trampoline (a stub between the
|
||
calling routine and the real function), locate the real
|
||
function. That's what tells us (a) whether we want to step
|
||
into it at all, and (b) what prologue we want to run to the
|
||
end of, if we do step into it. */
|
||
real_stop_pc = skip_language_trampoline (frame, stop_pc);
|
||
if (real_stop_pc == 0)
|
||
real_stop_pc = gdbarch_skip_trampoline_code (gdbarch, frame, stop_pc);
|
||
if (real_stop_pc != 0)
|
||
ecs->stop_func_start = real_stop_pc;
|
||
|
||
if (real_stop_pc != 0 && in_solib_dynsym_resolve_code (real_stop_pc))
|
||
{
|
||
symtab_and_line sr_sal;
|
||
sr_sal.pc = ecs->stop_func_start;
|
||
sr_sal.pspace = get_frame_program_space (frame);
|
||
|
||
insert_step_resume_breakpoint_at_sal (gdbarch,
|
||
sr_sal, null_frame_id);
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
|
||
/* If we have line number information for the function we are
|
||
thinking of stepping into and the function isn't on the skip
|
||
list, step into it.
|
||
|
||
If there are several symtabs at that PC (e.g. with include
|
||
files), just want to know whether *any* of them have line
|
||
numbers. find_pc_line handles this. */
|
||
{
|
||
struct symtab_and_line tmp_sal;
|
||
|
||
tmp_sal = find_pc_line (ecs->stop_func_start, 0);
|
||
if (tmp_sal.line != 0
|
||
&& !function_name_is_marked_for_skip (ecs->stop_func_name,
|
||
tmp_sal))
|
||
{
|
||
if (execution_direction == EXEC_REVERSE)
|
||
handle_step_into_function_backward (gdbarch, ecs);
|
||
else
|
||
handle_step_into_function (gdbarch, ecs);
|
||
return;
|
||
}
|
||
}
|
||
|
||
/* If we have no line number and the step-stop-if-no-debug is
|
||
set, we stop the step so that the user has a chance to switch
|
||
in assembly mode. */
|
||
if (ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE
|
||
&& step_stop_if_no_debug)
|
||
{
|
||
end_stepping_range (ecs);
|
||
return;
|
||
}
|
||
|
||
if (execution_direction == EXEC_REVERSE)
|
||
{
|
||
/* If we're already at the start of the function, we've either just
|
||
stepped backward into a single instruction function without line
|
||
number info, or stepped back out of a signal handler to the first
|
||
instruction of the function without line number info. Just keep
|
||
going, which will single-step back to the caller. */
|
||
if (ecs->stop_func_start != stop_pc)
|
||
{
|
||
/* Set a breakpoint at callee's start address.
|
||
From there we can step once and be back in the caller. */
|
||
symtab_and_line sr_sal;
|
||
sr_sal.pc = ecs->stop_func_start;
|
||
sr_sal.pspace = get_frame_program_space (frame);
|
||
insert_step_resume_breakpoint_at_sal (gdbarch,
|
||
sr_sal, null_frame_id);
|
||
}
|
||
}
|
||
else
|
||
/* Set a breakpoint at callee's return address (the address
|
||
at which the caller will resume). */
|
||
insert_step_resume_breakpoint_at_caller (frame);
|
||
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
|
||
/* Reverse stepping through solib trampolines. */
|
||
|
||
if (execution_direction == EXEC_REVERSE
|
||
&& ecs->event_thread->control.step_over_calls != STEP_OVER_NONE)
|
||
{
|
||
CORE_ADDR stop_pc = ecs->event_thread->suspend.stop_pc;
|
||
|
||
if (gdbarch_skip_trampoline_code (gdbarch, frame, stop_pc)
|
||
|| (ecs->stop_func_start == 0
|
||
&& in_solib_dynsym_resolve_code (stop_pc)))
|
||
{
|
||
/* Any solib trampoline code can be handled in reverse
|
||
by simply continuing to single-step. We have already
|
||
executed the solib function (backwards), and a few
|
||
steps will take us back through the trampoline to the
|
||
caller. */
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
else if (in_solib_dynsym_resolve_code (stop_pc))
|
||
{
|
||
/* Stepped backward into the solib dynsym resolver.
|
||
Set a breakpoint at its start and continue, then
|
||
one more step will take us out. */
|
||
symtab_and_line sr_sal;
|
||
sr_sal.pc = ecs->stop_func_start;
|
||
sr_sal.pspace = get_frame_program_space (frame);
|
||
insert_step_resume_breakpoint_at_sal (gdbarch,
|
||
sr_sal, null_frame_id);
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
}
|
||
|
||
stop_pc_sal = find_pc_line (ecs->event_thread->suspend.stop_pc, 0);
|
||
|
||
/* NOTE: tausq/2004-05-24: This if block used to be done before all
|
||
the trampoline processing logic, however, there are some trampolines
|
||
that have no names, so we should do trampoline handling first. */
|
||
if (ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE
|
||
&& ecs->stop_func_name == NULL
|
||
&& stop_pc_sal.line == 0)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: stepped into undebuggable function\n");
|
||
|
||
/* The inferior just stepped into, or returned to, an
|
||
undebuggable function (where there is no debugging information
|
||
and no line number corresponding to the address where the
|
||
inferior stopped). Since we want to skip this kind of code,
|
||
we keep going until the inferior returns from this
|
||
function - unless the user has asked us not to (via
|
||
set step-mode) or we no longer know how to get back
|
||
to the call site. */
|
||
if (step_stop_if_no_debug
|
||
|| !frame_id_p (frame_unwind_caller_id (frame)))
|
||
{
|
||
/* If we have no line number and the step-stop-if-no-debug
|
||
is set, we stop the step so that the user has a chance to
|
||
switch in assembly mode. */
|
||
end_stepping_range (ecs);
|
||
return;
|
||
}
|
||
else
|
||
{
|
||
/* Set a breakpoint at callee's return address (the address
|
||
at which the caller will resume). */
|
||
insert_step_resume_breakpoint_at_caller (frame);
|
||
keep_going (ecs);
|
||
return;
|
||
}
|
||
}
|
||
|
||
if (ecs->event_thread->control.step_range_end == 1)
|
||
{
|
||
/* It is stepi or nexti. We always want to stop stepping after
|
||
one instruction. */
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: stepi/nexti\n");
|
||
end_stepping_range (ecs);
|
||
return;
|
||
}
|
||
|
||
if (stop_pc_sal.line == 0)
|
||
{
|
||
/* We have no line number information. That means to stop
|
||
stepping (does this always happen right after one instruction,
|
||
when we do "s" in a function with no line numbers,
|
||
or can this happen as a result of a return or longjmp?). */
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: no line number info\n");
|
||
end_stepping_range (ecs);
|
||
return;
|
||
}
|
||
|
||
/* Look for "calls" to inlined functions, part one. If the inline
|
||
frame machinery detected some skipped call sites, we have entered
|
||
a new inline function. */
|
||
|
||
if (frame_id_eq (get_frame_id (get_current_frame ()),
|
||
ecs->event_thread->control.step_frame_id)
|
||
&& inline_skipped_frames (ecs->event_thread))
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: stepped into inlined function\n");
|
||
|
||
symtab_and_line call_sal = find_frame_sal (get_current_frame ());
|
||
|
||
if (ecs->event_thread->control.step_over_calls != STEP_OVER_ALL)
|
||
{
|
||
/* For "step", we're going to stop. But if the call site
|
||
for this inlined function is on the same source line as
|
||
we were previously stepping, go down into the function
|
||
first. Otherwise stop at the call site. */
|
||
|
||
if (call_sal.line == ecs->event_thread->current_line
|
||
&& call_sal.symtab == ecs->event_thread->current_symtab)
|
||
step_into_inline_frame (ecs->event_thread);
|
||
|
||
end_stepping_range (ecs);
|
||
return;
|
||
}
|
||
else
|
||
{
|
||
/* For "next", we should stop at the call site if it is on a
|
||
different source line. Otherwise continue through the
|
||
inlined function. */
|
||
if (call_sal.line == ecs->event_thread->current_line
|
||
&& call_sal.symtab == ecs->event_thread->current_symtab)
|
||
keep_going (ecs);
|
||
else
|
||
end_stepping_range (ecs);
|
||
return;
|
||
}
|
||
}
|
||
|
||
/* Look for "calls" to inlined functions, part two. If we are still
|
||
in the same real function we were stepping through, but we have
|
||
to go further up to find the exact frame ID, we are stepping
|
||
through a more inlined call beyond its call site. */
|
||
|
||
if (get_frame_type (get_current_frame ()) == INLINE_FRAME
|
||
&& !frame_id_eq (get_frame_id (get_current_frame ()),
|
||
ecs->event_thread->control.step_frame_id)
|
||
&& stepped_in_from (get_current_frame (),
|
||
ecs->event_thread->control.step_frame_id))
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: stepping through inlined function\n");
|
||
|
||
if (ecs->event_thread->control.step_over_calls == STEP_OVER_ALL)
|
||
keep_going (ecs);
|
||
else
|
||
end_stepping_range (ecs);
|
||
return;
|
||
}
|
||
|
||
if ((ecs->event_thread->suspend.stop_pc == stop_pc_sal.pc)
|
||
&& (ecs->event_thread->current_line != stop_pc_sal.line
|
||
|| ecs->event_thread->current_symtab != stop_pc_sal.symtab))
|
||
{
|
||
/* We are at the start of a different line. So stop. Note that
|
||
we don't stop if we step into the middle of a different line.
|
||
That is said to make things like for (;;) statements work
|
||
better. */
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: stepped to a different line\n");
|
||
end_stepping_range (ecs);
|
||
return;
|
||
}
|
||
|
||
/* We aren't done stepping.
|
||
|
||
Optimize by setting the stepping range to the line.
|
||
(We might not be in the original line, but if we entered a
|
||
new line in mid-statement, we continue stepping. This makes
|
||
things like for(;;) statements work better.) */
|
||
|
||
ecs->event_thread->control.step_range_start = stop_pc_sal.pc;
|
||
ecs->event_thread->control.step_range_end = stop_pc_sal.end;
|
||
ecs->event_thread->control.may_range_step = 1;
|
||
set_step_info (frame, stop_pc_sal);
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: keep going\n");
|
||
keep_going (ecs);
|
||
}
|
||
|
||
/* In all-stop mode, if we're currently stepping but have stopped in
|
||
some other thread, we may need to switch back to the stepped
|
||
thread. Returns true we set the inferior running, false if we left
|
||
it stopped (and the event needs further processing). */
|
||
|
||
static int
|
||
switch_back_to_stepped_thread (struct execution_control_state *ecs)
|
||
{
|
||
if (!target_is_non_stop_p ())
|
||
{
|
||
struct thread_info *stepping_thread;
|
||
|
||
/* If any thread is blocked on some internal breakpoint, and we
|
||
simply need to step over that breakpoint to get it going
|
||
again, do that first. */
|
||
|
||
/* However, if we see an event for the stepping thread, then we
|
||
know all other threads have been moved past their breakpoints
|
||
already. Let the caller check whether the step is finished,
|
||
etc., before deciding to move it past a breakpoint. */
|
||
if (ecs->event_thread->control.step_range_end != 0)
|
||
return 0;
|
||
|
||
/* Check if the current thread is blocked on an incomplete
|
||
step-over, interrupted by a random signal. */
|
||
if (ecs->event_thread->control.trap_expected
|
||
&& ecs->event_thread->suspend.stop_signal != GDB_SIGNAL_TRAP)
|
||
{
|
||
if (debug_infrun)
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: need to finish step-over of [%s]\n",
|
||
target_pid_to_str (ecs->event_thread->ptid).c_str ());
|
||
}
|
||
keep_going (ecs);
|
||
return 1;
|
||
}
|
||
|
||
/* Check if the current thread is blocked by a single-step
|
||
breakpoint of another thread. */
|
||
if (ecs->hit_singlestep_breakpoint)
|
||
{
|
||
if (debug_infrun)
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: need to step [%s] over single-step "
|
||
"breakpoint\n",
|
||
target_pid_to_str (ecs->ptid).c_str ());
|
||
}
|
||
keep_going (ecs);
|
||
return 1;
|
||
}
|
||
|
||
/* If this thread needs yet another step-over (e.g., stepping
|
||
through a delay slot), do it first before moving on to
|
||
another thread. */
|
||
if (thread_still_needs_step_over (ecs->event_thread))
|
||
{
|
||
if (debug_infrun)
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: thread [%s] still needs step-over\n",
|
||
target_pid_to_str (ecs->event_thread->ptid).c_str ());
|
||
}
|
||
keep_going (ecs);
|
||
return 1;
|
||
}
|
||
|
||
/* If scheduler locking applies even if not stepping, there's no
|
||
need to walk over threads. Above we've checked whether the
|
||
current thread is stepping. If some other thread not the
|
||
event thread is stepping, then it must be that scheduler
|
||
locking is not in effect. */
|
||
if (schedlock_applies (ecs->event_thread))
|
||
return 0;
|
||
|
||
/* Otherwise, we no longer expect a trap in the current thread.
|
||
Clear the trap_expected flag before switching back -- this is
|
||
what keep_going does as well, if we call it. */
|
||
ecs->event_thread->control.trap_expected = 0;
|
||
|
||
/* Likewise, clear the signal if it should not be passed. */
|
||
if (!signal_program[ecs->event_thread->suspend.stop_signal])
|
||
ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
|
||
|
||
/* Do all pending step-overs before actually proceeding with
|
||
step/next/etc. */
|
||
if (start_step_over ())
|
||
{
|
||
prepare_to_wait (ecs);
|
||
return 1;
|
||
}
|
||
|
||
/* Look for the stepping/nexting thread. */
|
||
stepping_thread = NULL;
|
||
|
||
for (thread_info *tp : all_non_exited_threads ())
|
||
{
|
||
/* Ignore threads of processes the caller is not
|
||
resuming. */
|
||
if (!sched_multi
|
||
&& tp->ptid.pid () != ecs->ptid.pid ())
|
||
continue;
|
||
|
||
/* When stepping over a breakpoint, we lock all threads
|
||
except the one that needs to move past the breakpoint.
|
||
If a non-event thread has this set, the "incomplete
|
||
step-over" check above should have caught it earlier. */
|
||
if (tp->control.trap_expected)
|
||
{
|
||
internal_error (__FILE__, __LINE__,
|
||
"[%s] has inconsistent state: "
|
||
"trap_expected=%d\n",
|
||
target_pid_to_str (tp->ptid).c_str (),
|
||
tp->control.trap_expected);
|
||
}
|
||
|
||
/* Did we find the stepping thread? */
|
||
if (tp->control.step_range_end)
|
||
{
|
||
/* Yep. There should only one though. */
|
||
gdb_assert (stepping_thread == NULL);
|
||
|
||
/* The event thread is handled at the top, before we
|
||
enter this loop. */
|
||
gdb_assert (tp != ecs->event_thread);
|
||
|
||
/* If some thread other than the event thread is
|
||
stepping, then scheduler locking can't be in effect,
|
||
otherwise we wouldn't have resumed the current event
|
||
thread in the first place. */
|
||
gdb_assert (!schedlock_applies (tp));
|
||
|
||
stepping_thread = tp;
|
||
}
|
||
}
|
||
|
||
if (stepping_thread != NULL)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: switching back to stepped thread\n");
|
||
|
||
if (keep_going_stepped_thread (stepping_thread))
|
||
{
|
||
prepare_to_wait (ecs);
|
||
return 1;
|
||
}
|
||
}
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
/* Set a previously stepped thread back to stepping. Returns true on
|
||
success, false if the resume is not possible (e.g., the thread
|
||
vanished). */
|
||
|
||
static int
|
||
keep_going_stepped_thread (struct thread_info *tp)
|
||
{
|
||
struct frame_info *frame;
|
||
struct execution_control_state ecss;
|
||
struct execution_control_state *ecs = &ecss;
|
||
|
||
/* If the stepping thread exited, then don't try to switch back and
|
||
resume it, which could fail in several different ways depending
|
||
on the target. Instead, just keep going.
|
||
|
||
We can find a stepping dead thread in the thread list in two
|
||
cases:
|
||
|
||
- The target supports thread exit events, and when the target
|
||
tries to delete the thread from the thread list, inferior_ptid
|
||
pointed at the exiting thread. In such case, calling
|
||
delete_thread does not really remove the thread from the list;
|
||
instead, the thread is left listed, with 'exited' state.
|
||
|
||
- The target's debug interface does not support thread exit
|
||
events, and so we have no idea whatsoever if the previously
|
||
stepping thread is still alive. For that reason, we need to
|
||
synchronously query the target now. */
|
||
|
||
if (tp->state == THREAD_EXITED || !target_thread_alive (tp->ptid))
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: not resuming previously "
|
||
"stepped thread, it has vanished\n");
|
||
|
||
delete_thread (tp);
|
||
return 0;
|
||
}
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: resuming previously stepped thread\n");
|
||
|
||
reset_ecs (ecs, tp);
|
||
switch_to_thread (tp);
|
||
|
||
tp->suspend.stop_pc = regcache_read_pc (get_thread_regcache (tp));
|
||
frame = get_current_frame ();
|
||
|
||
/* If the PC of the thread we were trying to single-step has
|
||
changed, then that thread has trapped or been signaled, but the
|
||
event has not been reported to GDB yet. Re-poll the target
|
||
looking for this particular thread's event (i.e. temporarily
|
||
enable schedlock) by:
|
||
|
||
- setting a break at the current PC
|
||
- resuming that particular thread, only (by setting trap
|
||
expected)
|
||
|
||
This prevents us continuously moving the single-step breakpoint
|
||
forward, one instruction at a time, overstepping. */
|
||
|
||
if (tp->suspend.stop_pc != tp->prev_pc)
|
||
{
|
||
ptid_t resume_ptid;
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: expected thread advanced also (%s -> %s)\n",
|
||
paddress (target_gdbarch (), tp->prev_pc),
|
||
paddress (target_gdbarch (), tp->suspend.stop_pc));
|
||
|
||
/* Clear the info of the previous step-over, as it's no longer
|
||
valid (if the thread was trying to step over a breakpoint, it
|
||
has already succeeded). It's what keep_going would do too,
|
||
if we called it. Do this before trying to insert the sss
|
||
breakpoint, otherwise if we were previously trying to step
|
||
over this exact address in another thread, the breakpoint is
|
||
skipped. */
|
||
clear_step_over_info ();
|
||
tp->control.trap_expected = 0;
|
||
|
||
insert_single_step_breakpoint (get_frame_arch (frame),
|
||
get_frame_address_space (frame),
|
||
tp->suspend.stop_pc);
|
||
|
||
tp->resumed = 1;
|
||
resume_ptid = internal_resume_ptid (tp->control.stepping_command);
|
||
do_target_resume (resume_ptid, 0, GDB_SIGNAL_0);
|
||
}
|
||
else
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: expected thread still hasn't advanced\n");
|
||
|
||
keep_going_pass_signal (ecs);
|
||
}
|
||
return 1;
|
||
}
|
||
|
||
/* Is thread TP in the middle of (software or hardware)
|
||
single-stepping? (Note the result of this function must never be
|
||
passed directly as target_resume's STEP parameter.) */
|
||
|
||
static int
|
||
currently_stepping (struct thread_info *tp)
|
||
{
|
||
return ((tp->control.step_range_end
|
||
&& tp->control.step_resume_breakpoint == NULL)
|
||
|| tp->control.trap_expected
|
||
|| tp->stepped_breakpoint
|
||
|| bpstat_should_step ());
|
||
}
|
||
|
||
/* Inferior has stepped into a subroutine call with source code that
|
||
we should not step over. Do step to the first line of code in
|
||
it. */
|
||
|
||
static void
|
||
handle_step_into_function (struct gdbarch *gdbarch,
|
||
struct execution_control_state *ecs)
|
||
{
|
||
fill_in_stop_func (gdbarch, ecs);
|
||
|
||
compunit_symtab *cust
|
||
= find_pc_compunit_symtab (ecs->event_thread->suspend.stop_pc);
|
||
if (cust != NULL && compunit_language (cust) != language_asm)
|
||
ecs->stop_func_start
|
||
= gdbarch_skip_prologue_noexcept (gdbarch, ecs->stop_func_start);
|
||
|
||
symtab_and_line stop_func_sal = find_pc_line (ecs->stop_func_start, 0);
|
||
/* Use the step_resume_break to step until the end of the prologue,
|
||
even if that involves jumps (as it seems to on the vax under
|
||
4.2). */
|
||
/* If the prologue ends in the middle of a source line, continue to
|
||
the end of that source line (if it is still within the function).
|
||
Otherwise, just go to end of prologue. */
|
||
if (stop_func_sal.end
|
||
&& stop_func_sal.pc != ecs->stop_func_start
|
||
&& stop_func_sal.end < ecs->stop_func_end)
|
||
ecs->stop_func_start = stop_func_sal.end;
|
||
|
||
/* Architectures which require breakpoint adjustment might not be able
|
||
to place a breakpoint at the computed address. If so, the test
|
||
``ecs->stop_func_start == stop_pc'' will never succeed. Adjust
|
||
ecs->stop_func_start to an address at which a breakpoint may be
|
||
legitimately placed.
|
||
|
||
Note: kevinb/2004-01-19: On FR-V, if this adjustment is not
|
||
made, GDB will enter an infinite loop when stepping through
|
||
optimized code consisting of VLIW instructions which contain
|
||
subinstructions corresponding to different source lines. On
|
||
FR-V, it's not permitted to place a breakpoint on any but the
|
||
first subinstruction of a VLIW instruction. When a breakpoint is
|
||
set, GDB will adjust the breakpoint address to the beginning of
|
||
the VLIW instruction. Thus, we need to make the corresponding
|
||
adjustment here when computing the stop address. */
|
||
|
||
if (gdbarch_adjust_breakpoint_address_p (gdbarch))
|
||
{
|
||
ecs->stop_func_start
|
||
= gdbarch_adjust_breakpoint_address (gdbarch,
|
||
ecs->stop_func_start);
|
||
}
|
||
|
||
if (ecs->stop_func_start == ecs->event_thread->suspend.stop_pc)
|
||
{
|
||
/* We are already there: stop now. */
|
||
end_stepping_range (ecs);
|
||
return;
|
||
}
|
||
else
|
||
{
|
||
/* Put the step-breakpoint there and go until there. */
|
||
symtab_and_line sr_sal;
|
||
sr_sal.pc = ecs->stop_func_start;
|
||
sr_sal.section = find_pc_overlay (ecs->stop_func_start);
|
||
sr_sal.pspace = get_frame_program_space (get_current_frame ());
|
||
|
||
/* Do not specify what the fp should be when we stop since on
|
||
some machines the prologue is where the new fp value is
|
||
established. */
|
||
insert_step_resume_breakpoint_at_sal (gdbarch, sr_sal, null_frame_id);
|
||
|
||
/* And make sure stepping stops right away then. */
|
||
ecs->event_thread->control.step_range_end
|
||
= ecs->event_thread->control.step_range_start;
|
||
}
|
||
keep_going (ecs);
|
||
}
|
||
|
||
/* Inferior has stepped backward into a subroutine call with source
|
||
code that we should not step over. Do step to the beginning of the
|
||
last line of code in it. */
|
||
|
||
static void
|
||
handle_step_into_function_backward (struct gdbarch *gdbarch,
|
||
struct execution_control_state *ecs)
|
||
{
|
||
struct compunit_symtab *cust;
|
||
struct symtab_and_line stop_func_sal;
|
||
|
||
fill_in_stop_func (gdbarch, ecs);
|
||
|
||
cust = find_pc_compunit_symtab (ecs->event_thread->suspend.stop_pc);
|
||
if (cust != NULL && compunit_language (cust) != language_asm)
|
||
ecs->stop_func_start
|
||
= gdbarch_skip_prologue_noexcept (gdbarch, ecs->stop_func_start);
|
||
|
||
stop_func_sal = find_pc_line (ecs->event_thread->suspend.stop_pc, 0);
|
||
|
||
/* OK, we're just going to keep stepping here. */
|
||
if (stop_func_sal.pc == ecs->event_thread->suspend.stop_pc)
|
||
{
|
||
/* We're there already. Just stop stepping now. */
|
||
end_stepping_range (ecs);
|
||
}
|
||
else
|
||
{
|
||
/* Else just reset the step range and keep going.
|
||
No step-resume breakpoint, they don't work for
|
||
epilogues, which can have multiple entry paths. */
|
||
ecs->event_thread->control.step_range_start = stop_func_sal.pc;
|
||
ecs->event_thread->control.step_range_end = stop_func_sal.end;
|
||
keep_going (ecs);
|
||
}
|
||
return;
|
||
}
|
||
|
||
/* Insert a "step-resume breakpoint" at SR_SAL with frame ID SR_ID.
|
||
This is used to both functions and to skip over code. */
|
||
|
||
static void
|
||
insert_step_resume_breakpoint_at_sal_1 (struct gdbarch *gdbarch,
|
||
struct symtab_and_line sr_sal,
|
||
struct frame_id sr_id,
|
||
enum bptype sr_type)
|
||
{
|
||
/* There should never be more than one step-resume or longjmp-resume
|
||
breakpoint per thread, so we should never be setting a new
|
||
step_resume_breakpoint when one is already active. */
|
||
gdb_assert (inferior_thread ()->control.step_resume_breakpoint == NULL);
|
||
gdb_assert (sr_type == bp_step_resume || sr_type == bp_hp_step_resume);
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: inserting step-resume breakpoint at %s\n",
|
||
paddress (gdbarch, sr_sal.pc));
|
||
|
||
inferior_thread ()->control.step_resume_breakpoint
|
||
= set_momentary_breakpoint (gdbarch, sr_sal, sr_id, sr_type).release ();
|
||
}
|
||
|
||
void
|
||
insert_step_resume_breakpoint_at_sal (struct gdbarch *gdbarch,
|
||
struct symtab_and_line sr_sal,
|
||
struct frame_id sr_id)
|
||
{
|
||
insert_step_resume_breakpoint_at_sal_1 (gdbarch,
|
||
sr_sal, sr_id,
|
||
bp_step_resume);
|
||
}
|
||
|
||
/* Insert a "high-priority step-resume breakpoint" at RETURN_FRAME.pc.
|
||
This is used to skip a potential signal handler.
|
||
|
||
This is called with the interrupted function's frame. The signal
|
||
handler, when it returns, will resume the interrupted function at
|
||
RETURN_FRAME.pc. */
|
||
|
||
static void
|
||
insert_hp_step_resume_breakpoint_at_frame (struct frame_info *return_frame)
|
||
{
|
||
gdb_assert (return_frame != NULL);
|
||
|
||
struct gdbarch *gdbarch = get_frame_arch (return_frame);
|
||
|
||
symtab_and_line sr_sal;
|
||
sr_sal.pc = gdbarch_addr_bits_remove (gdbarch, get_frame_pc (return_frame));
|
||
sr_sal.section = find_pc_overlay (sr_sal.pc);
|
||
sr_sal.pspace = get_frame_program_space (return_frame);
|
||
|
||
insert_step_resume_breakpoint_at_sal_1 (gdbarch, sr_sal,
|
||
get_stack_frame_id (return_frame),
|
||
bp_hp_step_resume);
|
||
}
|
||
|
||
/* Insert a "step-resume breakpoint" at the previous frame's PC. This
|
||
is used to skip a function after stepping into it (for "next" or if
|
||
the called function has no debugging information).
|
||
|
||
The current function has almost always been reached by single
|
||
stepping a call or return instruction. NEXT_FRAME belongs to the
|
||
current function, and the breakpoint will be set at the caller's
|
||
resume address.
|
||
|
||
This is a separate function rather than reusing
|
||
insert_hp_step_resume_breakpoint_at_frame in order to avoid
|
||
get_prev_frame, which may stop prematurely (see the implementation
|
||
of frame_unwind_caller_id for an example). */
|
||
|
||
static void
|
||
insert_step_resume_breakpoint_at_caller (struct frame_info *next_frame)
|
||
{
|
||
/* We shouldn't have gotten here if we don't know where the call site
|
||
is. */
|
||
gdb_assert (frame_id_p (frame_unwind_caller_id (next_frame)));
|
||
|
||
struct gdbarch *gdbarch = frame_unwind_caller_arch (next_frame);
|
||
|
||
symtab_and_line sr_sal;
|
||
sr_sal.pc = gdbarch_addr_bits_remove (gdbarch,
|
||
frame_unwind_caller_pc (next_frame));
|
||
sr_sal.section = find_pc_overlay (sr_sal.pc);
|
||
sr_sal.pspace = frame_unwind_program_space (next_frame);
|
||
|
||
insert_step_resume_breakpoint_at_sal (gdbarch, sr_sal,
|
||
frame_unwind_caller_id (next_frame));
|
||
}
|
||
|
||
/* Insert a "longjmp-resume" breakpoint at PC. This is used to set a
|
||
new breakpoint at the target of a jmp_buf. The handling of
|
||
longjmp-resume uses the same mechanisms used for handling
|
||
"step-resume" breakpoints. */
|
||
|
||
static void
|
||
insert_longjmp_resume_breakpoint (struct gdbarch *gdbarch, CORE_ADDR pc)
|
||
{
|
||
/* There should never be more than one longjmp-resume breakpoint per
|
||
thread, so we should never be setting a new
|
||
longjmp_resume_breakpoint when one is already active. */
|
||
gdb_assert (inferior_thread ()->control.exception_resume_breakpoint == NULL);
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: inserting longjmp-resume breakpoint at %s\n",
|
||
paddress (gdbarch, pc));
|
||
|
||
inferior_thread ()->control.exception_resume_breakpoint =
|
||
set_momentary_breakpoint_at_pc (gdbarch, pc, bp_longjmp_resume).release ();
|
||
}
|
||
|
||
/* Insert an exception resume breakpoint. TP is the thread throwing
|
||
the exception. The block B is the block of the unwinder debug hook
|
||
function. FRAME is the frame corresponding to the call to this
|
||
function. SYM is the symbol of the function argument holding the
|
||
target PC of the exception. */
|
||
|
||
static void
|
||
insert_exception_resume_breakpoint (struct thread_info *tp,
|
||
const struct block *b,
|
||
struct frame_info *frame,
|
||
struct symbol *sym)
|
||
{
|
||
try
|
||
{
|
||
struct block_symbol vsym;
|
||
struct value *value;
|
||
CORE_ADDR handler;
|
||
struct breakpoint *bp;
|
||
|
||
vsym = lookup_symbol_search_name (SYMBOL_SEARCH_NAME (sym),
|
||
b, VAR_DOMAIN);
|
||
value = read_var_value (vsym.symbol, vsym.block, frame);
|
||
/* If the value was optimized out, revert to the old behavior. */
|
||
if (! value_optimized_out (value))
|
||
{
|
||
handler = value_as_address (value);
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: exception resume at %lx\n",
|
||
(unsigned long) handler);
|
||
|
||
bp = set_momentary_breakpoint_at_pc (get_frame_arch (frame),
|
||
handler,
|
||
bp_exception_resume).release ();
|
||
|
||
/* set_momentary_breakpoint_at_pc invalidates FRAME. */
|
||
frame = NULL;
|
||
|
||
bp->thread = tp->global_num;
|
||
inferior_thread ()->control.exception_resume_breakpoint = bp;
|
||
}
|
||
}
|
||
catch (const gdb_exception_error &e)
|
||
{
|
||
/* We want to ignore errors here. */
|
||
}
|
||
}
|
||
|
||
/* A helper for check_exception_resume that sets an
|
||
exception-breakpoint based on a SystemTap probe. */
|
||
|
||
static void
|
||
insert_exception_resume_from_probe (struct thread_info *tp,
|
||
const struct bound_probe *probe,
|
||
struct frame_info *frame)
|
||
{
|
||
struct value *arg_value;
|
||
CORE_ADDR handler;
|
||
struct breakpoint *bp;
|
||
|
||
arg_value = probe_safe_evaluate_at_pc (frame, 1);
|
||
if (!arg_value)
|
||
return;
|
||
|
||
handler = value_as_address (arg_value);
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: exception resume at %s\n",
|
||
paddress (get_objfile_arch (probe->objfile),
|
||
handler));
|
||
|
||
bp = set_momentary_breakpoint_at_pc (get_frame_arch (frame),
|
||
handler, bp_exception_resume).release ();
|
||
bp->thread = tp->global_num;
|
||
inferior_thread ()->control.exception_resume_breakpoint = bp;
|
||
}
|
||
|
||
/* This is called when an exception has been intercepted. Check to
|
||
see whether the exception's destination is of interest, and if so,
|
||
set an exception resume breakpoint there. */
|
||
|
||
static void
|
||
check_exception_resume (struct execution_control_state *ecs,
|
||
struct frame_info *frame)
|
||
{
|
||
struct bound_probe probe;
|
||
struct symbol *func;
|
||
|
||
/* First see if this exception unwinding breakpoint was set via a
|
||
SystemTap probe point. If so, the probe has two arguments: the
|
||
CFA and the HANDLER. We ignore the CFA, extract the handler, and
|
||
set a breakpoint there. */
|
||
probe = find_probe_by_pc (get_frame_pc (frame));
|
||
if (probe.prob)
|
||
{
|
||
insert_exception_resume_from_probe (ecs->event_thread, &probe, frame);
|
||
return;
|
||
}
|
||
|
||
func = get_frame_function (frame);
|
||
if (!func)
|
||
return;
|
||
|
||
try
|
||
{
|
||
const struct block *b;
|
||
struct block_iterator iter;
|
||
struct symbol *sym;
|
||
int argno = 0;
|
||
|
||
/* The exception breakpoint is a thread-specific breakpoint on
|
||
the unwinder's debug hook, declared as:
|
||
|
||
void _Unwind_DebugHook (void *cfa, void *handler);
|
||
|
||
The CFA argument indicates the frame to which control is
|
||
about to be transferred. HANDLER is the destination PC.
|
||
|
||
We ignore the CFA and set a temporary breakpoint at HANDLER.
|
||
This is not extremely efficient but it avoids issues in gdb
|
||
with computing the DWARF CFA, and it also works even in weird
|
||
cases such as throwing an exception from inside a signal
|
||
handler. */
|
||
|
||
b = SYMBOL_BLOCK_VALUE (func);
|
||
ALL_BLOCK_SYMBOLS (b, iter, sym)
|
||
{
|
||
if (!SYMBOL_IS_ARGUMENT (sym))
|
||
continue;
|
||
|
||
if (argno == 0)
|
||
++argno;
|
||
else
|
||
{
|
||
insert_exception_resume_breakpoint (ecs->event_thread,
|
||
b, frame, sym);
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
catch (const gdb_exception_error &e)
|
||
{
|
||
}
|
||
}
|
||
|
||
static void
|
||
stop_waiting (struct execution_control_state *ecs)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: stop_waiting\n");
|
||
|
||
/* Let callers know we don't want to wait for the inferior anymore. */
|
||
ecs->wait_some_more = 0;
|
||
|
||
/* If all-stop, but the target is always in non-stop mode, stop all
|
||
threads now that we're presenting the stop to the user. */
|
||
if (!non_stop && target_is_non_stop_p ())
|
||
stop_all_threads ();
|
||
}
|
||
|
||
/* Like keep_going, but passes the signal to the inferior, even if the
|
||
signal is set to nopass. */
|
||
|
||
static void
|
||
keep_going_pass_signal (struct execution_control_state *ecs)
|
||
{
|
||
gdb_assert (ecs->event_thread->ptid == inferior_ptid);
|
||
gdb_assert (!ecs->event_thread->resumed);
|
||
|
||
/* Save the pc before execution, to compare with pc after stop. */
|
||
ecs->event_thread->prev_pc
|
||
= regcache_read_pc (get_thread_regcache (ecs->event_thread));
|
||
|
||
if (ecs->event_thread->control.trap_expected)
|
||
{
|
||
struct thread_info *tp = ecs->event_thread;
|
||
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: %s has trap_expected set, "
|
||
"resuming to collect trap\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
|
||
/* We haven't yet gotten our trap, and either: intercepted a
|
||
non-signal event (e.g., a fork); or took a signal which we
|
||
are supposed to pass through to the inferior. Simply
|
||
continue. */
|
||
resume (ecs->event_thread->suspend.stop_signal);
|
||
}
|
||
else if (step_over_info_valid_p ())
|
||
{
|
||
/* Another thread is stepping over a breakpoint in-line. If
|
||
this thread needs a step-over too, queue the request. In
|
||
either case, this resume must be deferred for later. */
|
||
struct thread_info *tp = ecs->event_thread;
|
||
|
||
if (ecs->hit_singlestep_breakpoint
|
||
|| thread_still_needs_step_over (tp))
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: step-over already in progress: "
|
||
"step-over for %s deferred\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
thread_step_over_chain_enqueue (tp);
|
||
}
|
||
else
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"infrun: step-over in progress: "
|
||
"resume of %s deferred\n",
|
||
target_pid_to_str (tp->ptid).c_str ());
|
||
}
|
||
}
|
||
else
|
||
{
|
||
struct regcache *regcache = get_current_regcache ();
|
||
int remove_bp;
|
||
int remove_wps;
|
||
step_over_what step_what;
|
||
|
||
/* Either the trap was not expected, but we are continuing
|
||
anyway (if we got a signal, the user asked it be passed to
|
||
the child)
|
||
-- or --
|
||
We got our expected trap, but decided we should resume from
|
||
it.
|
||
|
||
We're going to run this baby now!
|
||
|
||
Note that insert_breakpoints won't try to re-insert
|
||
already inserted breakpoints. Therefore, we don't
|
||
care if breakpoints were already inserted, or not. */
|
||
|
||
/* If we need to step over a breakpoint, and we're not using
|
||
displaced stepping to do so, insert all breakpoints
|
||
(watchpoints, etc.) but the one we're stepping over, step one
|
||
instruction, and then re-insert the breakpoint when that step
|
||
is finished. */
|
||
|
||
step_what = thread_still_needs_step_over (ecs->event_thread);
|
||
|
||
remove_bp = (ecs->hit_singlestep_breakpoint
|
||
|| (step_what & STEP_OVER_BREAKPOINT));
|
||
remove_wps = (step_what & STEP_OVER_WATCHPOINT);
|
||
|
||
/* We can't use displaced stepping if we need to step past a
|
||
watchpoint. The instruction copied to the scratch pad would
|
||
still trigger the watchpoint. */
|
||
if (remove_bp
|
||
&& (remove_wps || !use_displaced_stepping (ecs->event_thread)))
|
||
{
|
||
set_step_over_info (regcache->aspace (),
|
||
regcache_read_pc (regcache), remove_wps,
|
||
ecs->event_thread->global_num);
|
||
}
|
||
else if (remove_wps)
|
||
set_step_over_info (NULL, 0, remove_wps, -1);
|
||
|
||
/* If we now need to do an in-line step-over, we need to stop
|
||
all other threads. Note this must be done before
|
||
insert_breakpoints below, because that removes the breakpoint
|
||
we're about to step over, otherwise other threads could miss
|
||
it. */
|
||
if (step_over_info_valid_p () && target_is_non_stop_p ())
|
||
stop_all_threads ();
|
||
|
||
/* Stop stepping if inserting breakpoints fails. */
|
||
try
|
||
{
|
||
insert_breakpoints ();
|
||
}
|
||
catch (const gdb_exception_error &e)
|
||
{
|
||
exception_print (gdb_stderr, e);
|
||
stop_waiting (ecs);
|
||
clear_step_over_info ();
|
||
return;
|
||
}
|
||
|
||
ecs->event_thread->control.trap_expected = (remove_bp || remove_wps);
|
||
|
||
resume (ecs->event_thread->suspend.stop_signal);
|
||
}
|
||
|
||
prepare_to_wait (ecs);
|
||
}
|
||
|
||
/* Called when we should continue running the inferior, because the
|
||
current event doesn't cause a user visible stop. This does the
|
||
resuming part; waiting for the next event is done elsewhere. */
|
||
|
||
static void
|
||
keep_going (struct execution_control_state *ecs)
|
||
{
|
||
if (ecs->event_thread->control.trap_expected
|
||
&& ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
|
||
ecs->event_thread->control.trap_expected = 0;
|
||
|
||
if (!signal_program[ecs->event_thread->suspend.stop_signal])
|
||
ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
|
||
keep_going_pass_signal (ecs);
|
||
}
|
||
|
||
/* This function normally comes after a resume, before
|
||
handle_inferior_event exits. It takes care of any last bits of
|
||
housekeeping, and sets the all-important wait_some_more flag. */
|
||
|
||
static void
|
||
prepare_to_wait (struct execution_control_state *ecs)
|
||
{
|
||
if (debug_infrun)
|
||
fprintf_unfiltered (gdb_stdlog, "infrun: prepare_to_wait\n");
|
||
|
||
ecs->wait_some_more = 1;
|
||
|
||
if (!target_is_async_p ())
|
||
mark_infrun_async_event_handler ();
|
||
}
|
||
|
||
/* We are done with the step range of a step/next/si/ni command.
|
||
Called once for each n of a "step n" operation. */
|
||
|
||
static void
|
||
end_stepping_range (struct execution_control_state *ecs)
|
||
{
|
||
ecs->event_thread->control.stop_step = 1;
|
||
stop_waiting (ecs);
|
||
}
|
||
|
||
/* Several print_*_reason functions to print why the inferior has stopped.
|
||
We always print something when the inferior exits, or receives a signal.
|
||
The rest of the cases are dealt with later on in normal_stop and
|
||
print_it_typical. Ideally there should be a call to one of these
|
||
print_*_reason functions functions from handle_inferior_event each time
|
||
stop_waiting is called.
|
||
|
||
Note that we don't call these directly, instead we delegate that to
|
||
the interpreters, through observers. Interpreters then call these
|
||
with whatever uiout is right. */
|
||
|
||
void
|
||
print_end_stepping_range_reason (struct ui_out *uiout)
|
||
{
|
||
/* For CLI-like interpreters, print nothing. */
|
||
|
||
if (uiout->is_mi_like_p ())
|
||
{
|
||
uiout->field_string ("reason",
|
||
async_reason_lookup (EXEC_ASYNC_END_STEPPING_RANGE));
|
||
}
|
||
}
|
||
|
||
void
|
||
print_signal_exited_reason (struct ui_out *uiout, enum gdb_signal siggnal)
|
||
{
|
||
annotate_signalled ();
|
||
if (uiout->is_mi_like_p ())
|
||
uiout->field_string
|
||
("reason", async_reason_lookup (EXEC_ASYNC_EXITED_SIGNALLED));
|
||
uiout->text ("\nProgram terminated with signal ");
|
||
annotate_signal_name ();
|
||
uiout->field_string ("signal-name",
|
||
gdb_signal_to_name (siggnal));
|
||
annotate_signal_name_end ();
|
||
uiout->text (", ");
|
||
annotate_signal_string ();
|
||
uiout->field_string ("signal-meaning",
|
||
gdb_signal_to_string (siggnal));
|
||
annotate_signal_string_end ();
|
||
uiout->text (".\n");
|
||
uiout->text ("The program no longer exists.\n");
|
||
}
|
||
|
||
void
|
||
print_exited_reason (struct ui_out *uiout, int exitstatus)
|
||
{
|
||
struct inferior *inf = current_inferior ();
|
||
std::string pidstr = target_pid_to_str (ptid_t (inf->pid));
|
||
|
||
annotate_exited (exitstatus);
|
||
if (exitstatus)
|
||
{
|
||
if (uiout->is_mi_like_p ())
|
||
uiout->field_string ("reason", async_reason_lookup (EXEC_ASYNC_EXITED));
|
||
uiout->text ("[Inferior ");
|
||
uiout->text (plongest (inf->num));
|
||
uiout->text (" (");
|
||
uiout->text (pidstr.c_str ());
|
||
uiout->text (") exited with code ");
|
||
uiout->field_fmt ("exit-code", "0%o", (unsigned int) exitstatus);
|
||
uiout->text ("]\n");
|
||
}
|
||
else
|
||
{
|
||
if (uiout->is_mi_like_p ())
|
||
uiout->field_string
|
||
("reason", async_reason_lookup (EXEC_ASYNC_EXITED_NORMALLY));
|
||
uiout->text ("[Inferior ");
|
||
uiout->text (plongest (inf->num));
|
||
uiout->text (" (");
|
||
uiout->text (pidstr.c_str ());
|
||
uiout->text (") exited normally]\n");
|
||
}
|
||
}
|
||
|
||
/* Some targets/architectures can do extra processing/display of
|
||
segmentation faults. E.g., Intel MPX boundary faults.
|
||
Call the architecture dependent function to handle the fault. */
|
||
|
||
static void
|
||
handle_segmentation_fault (struct ui_out *uiout)
|
||
{
|
||
struct regcache *regcache = get_current_regcache ();
|
||
struct gdbarch *gdbarch = regcache->arch ();
|
||
|
||
if (gdbarch_handle_segmentation_fault_p (gdbarch))
|
||
gdbarch_handle_segmentation_fault (gdbarch, uiout);
|
||
}
|
||
|
||
void
|
||
print_signal_received_reason (struct ui_out *uiout, enum gdb_signal siggnal)
|
||
{
|
||
struct thread_info *thr = inferior_thread ();
|
||
|
||
annotate_signal ();
|
||
|
||
if (uiout->is_mi_like_p ())
|
||
;
|
||
else if (show_thread_that_caused_stop ())
|
||
{
|
||
const char *name;
|
||
|
||
uiout->text ("\nThread ");
|
||
uiout->field_fmt ("thread-id", "%s", print_thread_id (thr));
|
||
|
||
name = thr->name != NULL ? thr->name : target_thread_name (thr);
|
||
if (name != NULL)
|
||
{
|
||
uiout->text (" \"");
|
||
uiout->field_fmt ("name", "%s", name);
|
||
uiout->text ("\"");
|
||
}
|
||
}
|
||
else
|
||
uiout->text ("\nProgram");
|
||
|
||
if (siggnal == GDB_SIGNAL_0 && !uiout->is_mi_like_p ())
|
||
uiout->text (" stopped");
|
||
else
|
||
{
|
||
uiout->text (" received signal ");
|
||
annotate_signal_name ();
|
||
if (uiout->is_mi_like_p ())
|
||
uiout->field_string
|
||
("reason", async_reason_lookup (EXEC_ASYNC_SIGNAL_RECEIVED));
|
||
uiout->field_string ("signal-name", gdb_signal_to_name (siggnal));
|
||
annotate_signal_name_end ();
|
||
uiout->text (", ");
|
||
annotate_signal_string ();
|
||
uiout->field_string ("signal-meaning", gdb_signal_to_string (siggnal));
|
||
|
||
if (siggnal == GDB_SIGNAL_SEGV)
|
||
handle_segmentation_fault (uiout);
|
||
|
||
annotate_signal_string_end ();
|
||
}
|
||
uiout->text (".\n");
|
||
}
|
||
|
||
void
|
||
print_no_history_reason (struct ui_out *uiout)
|
||
{
|
||
uiout->text ("\nNo more reverse-execution history.\n");
|
||
}
|
||
|
||
/* Print current location without a level number, if we have changed
|
||
functions or hit a breakpoint. Print source line if we have one.
|
||
bpstat_print contains the logic deciding in detail what to print,
|
||
based on the event(s) that just occurred. */
|
||
|
||
static void
|
||
print_stop_location (struct target_waitstatus *ws)
|
||
{
|
||
int bpstat_ret;
|
||
enum print_what source_flag;
|
||
int do_frame_printing = 1;
|
||
struct thread_info *tp = inferior_thread ();
|
||
|
||
bpstat_ret = bpstat_print (tp->control.stop_bpstat, ws->kind);
|
||
switch (bpstat_ret)
|
||
{
|
||
case PRINT_UNKNOWN:
|
||
/* FIXME: cagney/2002-12-01: Given that a frame ID does (or
|
||
should) carry around the function and does (or should) use
|
||
that when doing a frame comparison. */
|
||
if (tp->control.stop_step
|
||
&& frame_id_eq (tp->control.step_frame_id,
|
||
get_frame_id (get_current_frame ()))
|
||
&& (tp->control.step_start_function
|
||
== find_pc_function (tp->suspend.stop_pc)))
|
||
{
|
||
/* Finished step, just print source line. */
|
||
source_flag = SRC_LINE;
|
||
}
|
||
else
|
||
{
|
||
/* Print location and source line. */
|
||
source_flag = SRC_AND_LOC;
|
||
}
|
||
break;
|
||
case PRINT_SRC_AND_LOC:
|
||
/* Print location and source line. */
|
||
source_flag = SRC_AND_LOC;
|
||
break;
|
||
case PRINT_SRC_ONLY:
|
||
source_flag = SRC_LINE;
|
||
break;
|
||
case PRINT_NOTHING:
|
||
/* Something bogus. */
|
||
source_flag = SRC_LINE;
|
||
do_frame_printing = 0;
|
||
break;
|
||
default:
|
||
internal_error (__FILE__, __LINE__, _("Unknown value."));
|
||
}
|
||
|
||
/* The behavior of this routine with respect to the source
|
||
flag is:
|
||
SRC_LINE: Print only source line
|
||
LOCATION: Print only location
|
||
SRC_AND_LOC: Print location and source line. */
|
||
if (do_frame_printing)
|
||
print_stack_frame (get_selected_frame (NULL), 0, source_flag, 1);
|
||
}
|
||
|
||
/* See infrun.h. */
|
||
|
||
void
|
||
print_stop_event (struct ui_out *uiout, bool displays)
|
||
{
|
||
struct target_waitstatus last;
|
||
ptid_t last_ptid;
|
||
struct thread_info *tp;
|
||
|
||
get_last_target_status (&last_ptid, &last);
|
||
|
||
{
|
||
scoped_restore save_uiout = make_scoped_restore (¤t_uiout, uiout);
|
||
|
||
print_stop_location (&last);
|
||
|
||
/* Display the auto-display expressions. */
|
||
if (displays)
|
||
do_displays ();
|
||
}
|
||
|
||
tp = inferior_thread ();
|
||
if (tp->thread_fsm != NULL
|
||
&& tp->thread_fsm->finished_p ())
|
||
{
|
||
struct return_value_info *rv;
|
||
|
||
rv = tp->thread_fsm->return_value ();
|
||
if (rv != NULL)
|
||
print_return_value (uiout, rv);
|
||
}
|
||
}
|
||
|
||
/* See infrun.h. */
|
||
|
||
void
|
||
maybe_remove_breakpoints (void)
|
||
{
|
||
if (!breakpoints_should_be_inserted_now () && target_has_execution)
|
||
{
|
||
if (remove_breakpoints ())
|
||
{
|
||
target_terminal::ours_for_output ();
|
||
printf_filtered (_("Cannot remove breakpoints because "
|
||
"program is no longer writable.\nFurther "
|
||
"execution is probably impossible.\n"));
|
||
}
|
||
}
|
||
}
|
||
|
||
/* The execution context that just caused a normal stop. */
|
||
|
||
struct stop_context
|
||
{
|
||
stop_context ();
|
||
~stop_context ();
|
||
|
||
DISABLE_COPY_AND_ASSIGN (stop_context);
|
||
|
||
bool changed () const;
|
||
|
||
/* The stop ID. */
|
||
ULONGEST stop_id;
|
||
|
||
/* The event PTID. */
|
||
|
||
ptid_t ptid;
|
||
|
||
/* If stopp for a thread event, this is the thread that caused the
|
||
stop. */
|
||
struct thread_info *thread;
|
||
|
||
/* The inferior that caused the stop. */
|
||
int inf_num;
|
||
};
|
||
|
||
/* Initializes a new stop context. If stopped for a thread event, this
|
||
takes a strong reference to the thread. */
|
||
|
||
stop_context::stop_context ()
|
||
{
|
||
stop_id = get_stop_id ();
|
||
ptid = inferior_ptid;
|
||
inf_num = current_inferior ()->num;
|
||
|
||
if (inferior_ptid != null_ptid)
|
||
{
|
||
/* Take a strong reference so that the thread can't be deleted
|
||
yet. */
|
||
thread = inferior_thread ();
|
||
thread->incref ();
|
||
}
|
||
else
|
||
thread = NULL;
|
||
}
|
||
|
||
/* Release a stop context previously created with save_stop_context.
|
||
Releases the strong reference to the thread as well. */
|
||
|
||
stop_context::~stop_context ()
|
||
{
|
||
if (thread != NULL)
|
||
thread->decref ();
|
||
}
|
||
|
||
/* Return true if the current context no longer matches the saved stop
|
||
context. */
|
||
|
||
bool
|
||
stop_context::changed () const
|
||
{
|
||
if (ptid != inferior_ptid)
|
||
return true;
|
||
if (inf_num != current_inferior ()->num)
|
||
return true;
|
||
if (thread != NULL && thread->state != THREAD_STOPPED)
|
||
return true;
|
||
if (get_stop_id () != stop_id)
|
||
return true;
|
||
return false;
|
||
}
|
||
|
||
/* See infrun.h. */
|
||
|
||
int
|
||
normal_stop (void)
|
||
{
|
||
struct target_waitstatus last;
|
||
ptid_t last_ptid;
|
||
|
||
get_last_target_status (&last_ptid, &last);
|
||
|
||
new_stop_id ();
|
||
|
||
/* If an exception is thrown from this point on, make sure to
|
||
propagate GDB's knowledge of the executing state to the
|
||
frontend/user running state. A QUIT is an easy exception to see
|
||
here, so do this before any filtered output. */
|
||
|
||
gdb::optional<scoped_finish_thread_state> maybe_finish_thread_state;
|
||
|
||
if (!non_stop)
|
||
maybe_finish_thread_state.emplace (minus_one_ptid);
|
||
else if (last.kind == TARGET_WAITKIND_SIGNALLED
|
||
|| last.kind == TARGET_WAITKIND_EXITED)
|
||
{
|
||
/* On some targets, we may still have live threads in the
|
||
inferior when we get a process exit event. E.g., for
|
||
"checkpoint", when the current checkpoint/fork exits,
|
||
linux-fork.c automatically switches to another fork from
|
||
within target_mourn_inferior. */
|
||
if (inferior_ptid != null_ptid)
|
||
maybe_finish_thread_state.emplace (ptid_t (inferior_ptid.pid ()));
|
||
}
|
||
else if (last.kind != TARGET_WAITKIND_NO_RESUMED)
|
||
maybe_finish_thread_state.emplace (inferior_ptid);
|
||
|
||
/* As we're presenting a stop, and potentially removing breakpoints,
|
||
update the thread list so we can tell whether there are threads
|
||
running on the target. With target remote, for example, we can
|
||
only learn about new threads when we explicitly update the thread
|
||
list. Do this before notifying the interpreters about signal
|
||
stops, end of stepping ranges, etc., so that the "new thread"
|
||
output is emitted before e.g., "Program received signal FOO",
|
||
instead of after. */
|
||
update_thread_list ();
|
||
|
||
if (last.kind == TARGET_WAITKIND_STOPPED && stopped_by_random_signal)
|
||
gdb::observers::signal_received.notify (inferior_thread ()->suspend.stop_signal);
|
||
|
||
/* As with the notification of thread events, we want to delay
|
||
notifying the user that we've switched thread context until
|
||
the inferior actually stops.
|
||
|
||
There's no point in saying anything if the inferior has exited.
|
||
Note that SIGNALLED here means "exited with a signal", not
|
||
"received a signal".
|
||
|
||
Also skip saying anything in non-stop mode. In that mode, as we
|
||
don't want GDB to switch threads behind the user's back, to avoid
|
||
races where the user is typing a command to apply to thread x,
|
||
but GDB switches to thread y before the user finishes entering
|
||
the command, fetch_inferior_event installs a cleanup to restore
|
||
the current thread back to the thread the user had selected right
|
||
after this event is handled, so we're not really switching, only
|
||
informing of a stop. */
|
||
if (!non_stop
|
||
&& previous_inferior_ptid != inferior_ptid
|
||
&& target_has_execution
|
||
&& last.kind != TARGET_WAITKIND_SIGNALLED
|
||
&& last.kind != TARGET_WAITKIND_EXITED
|
||
&& last.kind != TARGET_WAITKIND_NO_RESUMED)
|
||
{
|
||
SWITCH_THRU_ALL_UIS ()
|
||
{
|
||
target_terminal::ours_for_output ();
|
||
printf_filtered (_("[Switching to %s]\n"),
|
||
target_pid_to_str (inferior_ptid).c_str ());
|
||
annotate_thread_changed ();
|
||
}
|
||
previous_inferior_ptid = inferior_ptid;
|
||
}
|
||
|
||
if (last.kind == TARGET_WAITKIND_NO_RESUMED)
|
||
{
|
||
SWITCH_THRU_ALL_UIS ()
|
||
if (current_ui->prompt_state == PROMPT_BLOCKED)
|
||
{
|
||
target_terminal::ours_for_output ();
|
||
printf_filtered (_("No unwaited-for children left.\n"));
|
||
}
|
||
}
|
||
|
||
/* Note: this depends on the update_thread_list call above. */
|
||
maybe_remove_breakpoints ();
|
||
|
||
/* If an auto-display called a function and that got a signal,
|
||
delete that auto-display to avoid an infinite recursion. */
|
||
|
||
if (stopped_by_random_signal)
|
||
disable_current_display ();
|
||
|
||
SWITCH_THRU_ALL_UIS ()
|
||
{
|
||
async_enable_stdin ();
|
||
}
|
||
|
||
/* Let the user/frontend see the threads as stopped. */
|
||
maybe_finish_thread_state.reset ();
|
||
|
||
/* Select innermost stack frame - i.e., current frame is frame 0,
|
||
and current location is based on that. Handle the case where the
|
||
dummy call is returning after being stopped. E.g. the dummy call
|
||
previously hit a breakpoint. (If the dummy call returns
|
||
normally, we won't reach here.) Do this before the stop hook is
|
||
run, so that it doesn't get to see the temporary dummy frame,
|
||
which is not where we'll present the stop. */
|
||
if (has_stack_frames ())
|
||
{
|
||
if (stop_stack_dummy == STOP_STACK_DUMMY)
|
||
{
|
||
/* Pop the empty frame that contains the stack dummy. This
|
||
also restores inferior state prior to the call (struct
|
||
infcall_suspend_state). */
|
||
struct frame_info *frame = get_current_frame ();
|
||
|
||
gdb_assert (get_frame_type (frame) == DUMMY_FRAME);
|
||
frame_pop (frame);
|
||
/* frame_pop calls reinit_frame_cache as the last thing it
|
||
does which means there's now no selected frame. */
|
||
}
|
||
|
||
select_frame (get_current_frame ());
|
||
|
||
/* Set the current source location. */
|
||
set_current_sal_from_frame (get_current_frame ());
|
||
}
|
||
|
||
/* Look up the hook_stop and run it (CLI internally handles problem
|
||
of stop_command's pre-hook not existing). */
|
||
if (stop_command != NULL)
|
||
{
|
||
stop_context saved_context;
|
||
|
||
try
|
||
{
|
||
execute_cmd_pre_hook (stop_command);
|
||
}
|
||
catch (const gdb_exception &ex)
|
||
{
|
||
exception_fprintf (gdb_stderr, ex,
|
||
"Error while running hook_stop:\n");
|
||
}
|
||
|
||
/* If the stop hook resumes the target, then there's no point in
|
||
trying to notify about the previous stop; its context is
|
||
gone. Likewise if the command switches thread or inferior --
|
||
the observers would print a stop for the wrong
|
||
thread/inferior. */
|
||
if (saved_context.changed ())
|
||
return 1;
|
||
}
|
||
|
||
/* Notify observers about the stop. This is where the interpreters
|
||
print the stop event. */
|
||
if (inferior_ptid != null_ptid)
|
||
gdb::observers::normal_stop.notify (inferior_thread ()->control.stop_bpstat,
|
||
stop_print_frame);
|
||
else
|
||
gdb::observers::normal_stop.notify (NULL, stop_print_frame);
|
||
|
||
annotate_stopped ();
|
||
|
||
if (target_has_execution)
|
||
{
|
||
if (last.kind != TARGET_WAITKIND_SIGNALLED
|
||
&& last.kind != TARGET_WAITKIND_EXITED
|
||
&& last.kind != TARGET_WAITKIND_NO_RESUMED)
|
||
/* Delete the breakpoint we stopped at, if it wants to be deleted.
|
||
Delete any breakpoint that is to be deleted at the next stop. */
|
||
breakpoint_auto_delete (inferior_thread ()->control.stop_bpstat);
|
||
}
|
||
|
||
/* Try to get rid of automatically added inferiors that are no
|
||
longer needed. Keeping those around slows down things linearly.
|
||
Note that this never removes the current inferior. */
|
||
prune_inferiors ();
|
||
|
||
return 0;
|
||
}
|
||
|
||
int
|
||
signal_stop_state (int signo)
|
||
{
|
||
return signal_stop[signo];
|
||
}
|
||
|
||
int
|
||
signal_print_state (int signo)
|
||
{
|
||
return signal_print[signo];
|
||
}
|
||
|
||
int
|
||
signal_pass_state (int signo)
|
||
{
|
||
return signal_program[signo];
|
||
}
|
||
|
||
static void
|
||
signal_cache_update (int signo)
|
||
{
|
||
if (signo == -1)
|
||
{
|
||
for (signo = 0; signo < (int) GDB_SIGNAL_LAST; signo++)
|
||
signal_cache_update (signo);
|
||
|
||
return;
|
||
}
|
||
|
||
signal_pass[signo] = (signal_stop[signo] == 0
|
||
&& signal_print[signo] == 0
|
||
&& signal_program[signo] == 1
|
||
&& signal_catch[signo] == 0);
|
||
}
|
||
|
||
int
|
||
signal_stop_update (int signo, int state)
|
||
{
|
||
int ret = signal_stop[signo];
|
||
|
||
signal_stop[signo] = state;
|
||
signal_cache_update (signo);
|
||
return ret;
|
||
}
|
||
|
||
int
|
||
signal_print_update (int signo, int state)
|
||
{
|
||
int ret = signal_print[signo];
|
||
|
||
signal_print[signo] = state;
|
||
signal_cache_update (signo);
|
||
return ret;
|
||
}
|
||
|
||
int
|
||
signal_pass_update (int signo, int state)
|
||
{
|
||
int ret = signal_program[signo];
|
||
|
||
signal_program[signo] = state;
|
||
signal_cache_update (signo);
|
||
return ret;
|
||
}
|
||
|
||
/* Update the global 'signal_catch' from INFO and notify the
|
||
target. */
|
||
|
||
void
|
||
signal_catch_update (const unsigned int *info)
|
||
{
|
||
int i;
|
||
|
||
for (i = 0; i < GDB_SIGNAL_LAST; ++i)
|
||
signal_catch[i] = info[i] > 0;
|
||
signal_cache_update (-1);
|
||
target_pass_signals (signal_pass);
|
||
}
|
||
|
||
static void
|
||
sig_print_header (void)
|
||
{
|
||
printf_filtered (_("Signal Stop\tPrint\tPass "
|
||
"to program\tDescription\n"));
|
||
}
|
||
|
||
static void
|
||
sig_print_info (enum gdb_signal oursig)
|
||
{
|
||
const char *name = gdb_signal_to_name (oursig);
|
||
int name_padding = 13 - strlen (name);
|
||
|
||
if (name_padding <= 0)
|
||
name_padding = 0;
|
||
|
||
printf_filtered ("%s", name);
|
||
printf_filtered ("%*.*s ", name_padding, name_padding, " ");
|
||
printf_filtered ("%s\t", signal_stop[oursig] ? "Yes" : "No");
|
||
printf_filtered ("%s\t", signal_print[oursig] ? "Yes" : "No");
|
||
printf_filtered ("%s\t\t", signal_program[oursig] ? "Yes" : "No");
|
||
printf_filtered ("%s\n", gdb_signal_to_string (oursig));
|
||
}
|
||
|
||
/* Specify how various signals in the inferior should be handled. */
|
||
|
||
static void
|
||
handle_command (const char *args, int from_tty)
|
||
{
|
||
int digits, wordlen;
|
||
int sigfirst, siglast;
|
||
enum gdb_signal oursig;
|
||
int allsigs;
|
||
|
||
if (args == NULL)
|
||
{
|
||
error_no_arg (_("signal to handle"));
|
||
}
|
||
|
||
/* Allocate and zero an array of flags for which signals to handle. */
|
||
|
||
const size_t nsigs = GDB_SIGNAL_LAST;
|
||
unsigned char sigs[nsigs] {};
|
||
|
||
/* Break the command line up into args. */
|
||
|
||
gdb_argv built_argv (args);
|
||
|
||
/* Walk through the args, looking for signal oursigs, signal names, and
|
||
actions. Signal numbers and signal names may be interspersed with
|
||
actions, with the actions being performed for all signals cumulatively
|
||
specified. Signal ranges can be specified as <LOW>-<HIGH>. */
|
||
|
||
for (char *arg : built_argv)
|
||
{
|
||
wordlen = strlen (arg);
|
||
for (digits = 0; isdigit (arg[digits]); digits++)
|
||
{;
|
||
}
|
||
allsigs = 0;
|
||
sigfirst = siglast = -1;
|
||
|
||
if (wordlen >= 1 && !strncmp (arg, "all", wordlen))
|
||
{
|
||
/* Apply action to all signals except those used by the
|
||
debugger. Silently skip those. */
|
||
allsigs = 1;
|
||
sigfirst = 0;
|
||
siglast = nsigs - 1;
|
||
}
|
||
else if (wordlen >= 1 && !strncmp (arg, "stop", wordlen))
|
||
{
|
||
SET_SIGS (nsigs, sigs, signal_stop);
|
||
SET_SIGS (nsigs, sigs, signal_print);
|
||
}
|
||
else if (wordlen >= 1 && !strncmp (arg, "ignore", wordlen))
|
||
{
|
||
UNSET_SIGS (nsigs, sigs, signal_program);
|
||
}
|
||
else if (wordlen >= 2 && !strncmp (arg, "print", wordlen))
|
||
{
|
||
SET_SIGS (nsigs, sigs, signal_print);
|
||
}
|
||
else if (wordlen >= 2 && !strncmp (arg, "pass", wordlen))
|
||
{
|
||
SET_SIGS (nsigs, sigs, signal_program);
|
||
}
|
||
else if (wordlen >= 3 && !strncmp (arg, "nostop", wordlen))
|
||
{
|
||
UNSET_SIGS (nsigs, sigs, signal_stop);
|
||
}
|
||
else if (wordlen >= 3 && !strncmp (arg, "noignore", wordlen))
|
||
{
|
||
SET_SIGS (nsigs, sigs, signal_program);
|
||
}
|
||
else if (wordlen >= 4 && !strncmp (arg, "noprint", wordlen))
|
||
{
|
||
UNSET_SIGS (nsigs, sigs, signal_print);
|
||
UNSET_SIGS (nsigs, sigs, signal_stop);
|
||
}
|
||
else if (wordlen >= 4 && !strncmp (arg, "nopass", wordlen))
|
||
{
|
||
UNSET_SIGS (nsigs, sigs, signal_program);
|
||
}
|
||
else if (digits > 0)
|
||
{
|
||
/* It is numeric. The numeric signal refers to our own
|
||
internal signal numbering from target.h, not to host/target
|
||
signal number. This is a feature; users really should be
|
||
using symbolic names anyway, and the common ones like
|
||
SIGHUP, SIGINT, SIGALRM, etc. will work right anyway. */
|
||
|
||
sigfirst = siglast = (int)
|
||
gdb_signal_from_command (atoi (arg));
|
||
if (arg[digits] == '-')
|
||
{
|
||
siglast = (int)
|
||
gdb_signal_from_command (atoi (arg + digits + 1));
|
||
}
|
||
if (sigfirst > siglast)
|
||
{
|
||
/* Bet he didn't figure we'd think of this case... */
|
||
std::swap (sigfirst, siglast);
|
||
}
|
||
}
|
||
else
|
||
{
|
||
oursig = gdb_signal_from_name (arg);
|
||
if (oursig != GDB_SIGNAL_UNKNOWN)
|
||
{
|
||
sigfirst = siglast = (int) oursig;
|
||
}
|
||
else
|
||
{
|
||
/* Not a number and not a recognized flag word => complain. */
|
||
error (_("Unrecognized or ambiguous flag word: \"%s\"."), arg);
|
||
}
|
||
}
|
||
|
||
/* If any signal numbers or symbol names were found, set flags for
|
||
which signals to apply actions to. */
|
||
|
||
for (int signum = sigfirst; signum >= 0 && signum <= siglast; signum++)
|
||
{
|
||
switch ((enum gdb_signal) signum)
|
||
{
|
||
case GDB_SIGNAL_TRAP:
|
||
case GDB_SIGNAL_INT:
|
||
if (!allsigs && !sigs[signum])
|
||
{
|
||
if (query (_("%s is used by the debugger.\n\
|
||
Are you sure you want to change it? "),
|
||
gdb_signal_to_name ((enum gdb_signal) signum)))
|
||
{
|
||
sigs[signum] = 1;
|
||
}
|
||
else
|
||
printf_unfiltered (_("Not confirmed, unchanged.\n"));
|
||
}
|
||
break;
|
||
case GDB_SIGNAL_0:
|
||
case GDB_SIGNAL_DEFAULT:
|
||
case GDB_SIGNAL_UNKNOWN:
|
||
/* Make sure that "all" doesn't print these. */
|
||
break;
|
||
default:
|
||
sigs[signum] = 1;
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
|
||
for (int signum = 0; signum < nsigs; signum++)
|
||
if (sigs[signum])
|
||
{
|
||
signal_cache_update (-1);
|
||
target_pass_signals (signal_pass);
|
||
target_program_signals (signal_program);
|
||
|
||
if (from_tty)
|
||
{
|
||
/* Show the results. */
|
||
sig_print_header ();
|
||
for (; signum < nsigs; signum++)
|
||
if (sigs[signum])
|
||
sig_print_info ((enum gdb_signal) signum);
|
||
}
|
||
|
||
break;
|
||
}
|
||
}
|
||
|
||
/* Complete the "handle" command. */
|
||
|
||
static void
|
||
handle_completer (struct cmd_list_element *ignore,
|
||
completion_tracker &tracker,
|
||
const char *text, const char *word)
|
||
{
|
||
static const char * const keywords[] =
|
||
{
|
||
"all",
|
||
"stop",
|
||
"ignore",
|
||
"print",
|
||
"pass",
|
||
"nostop",
|
||
"noignore",
|
||
"noprint",
|
||
"nopass",
|
||
NULL,
|
||
};
|
||
|
||
signal_completer (ignore, tracker, text, word);
|
||
complete_on_enum (tracker, keywords, word, word);
|
||
}
|
||
|
||
enum gdb_signal
|
||
gdb_signal_from_command (int num)
|
||
{
|
||
if (num >= 1 && num <= 15)
|
||
return (enum gdb_signal) num;
|
||
error (_("Only signals 1-15 are valid as numeric signals.\n\
|
||
Use \"info signals\" for a list of symbolic signals."));
|
||
}
|
||
|
||
/* Print current contents of the tables set by the handle command.
|
||
It is possible we should just be printing signals actually used
|
||
by the current target (but for things to work right when switching
|
||
targets, all signals should be in the signal tables). */
|
||
|
||
static void
|
||
info_signals_command (const char *signum_exp, int from_tty)
|
||
{
|
||
enum gdb_signal oursig;
|
||
|
||
sig_print_header ();
|
||
|
||
if (signum_exp)
|
||
{
|
||
/* First see if this is a symbol name. */
|
||
oursig = gdb_signal_from_name (signum_exp);
|
||
if (oursig == GDB_SIGNAL_UNKNOWN)
|
||
{
|
||
/* No, try numeric. */
|
||
oursig =
|
||
gdb_signal_from_command (parse_and_eval_long (signum_exp));
|
||
}
|
||
sig_print_info (oursig);
|
||
return;
|
||
}
|
||
|
||
printf_filtered ("\n");
|
||
/* These ugly casts brought to you by the native VAX compiler. */
|
||
for (oursig = GDB_SIGNAL_FIRST;
|
||
(int) oursig < (int) GDB_SIGNAL_LAST;
|
||
oursig = (enum gdb_signal) ((int) oursig + 1))
|
||
{
|
||
QUIT;
|
||
|
||
if (oursig != GDB_SIGNAL_UNKNOWN
|
||
&& oursig != GDB_SIGNAL_DEFAULT && oursig != GDB_SIGNAL_0)
|
||
sig_print_info (oursig);
|
||
}
|
||
|
||
printf_filtered (_("\nUse the \"handle\" command "
|
||
"to change these tables.\n"));
|
||
}
|
||
|
||
/* The $_siginfo convenience variable is a bit special. We don't know
|
||
for sure the type of the value until we actually have a chance to
|
||
fetch the data. The type can change depending on gdbarch, so it is
|
||
also dependent on which thread you have selected.
|
||
|
||
1. making $_siginfo be an internalvar that creates a new value on
|
||
access.
|
||
|
||
2. making the value of $_siginfo be an lval_computed value. */
|
||
|
||
/* This function implements the lval_computed support for reading a
|
||
$_siginfo value. */
|
||
|
||
static void
|
||
siginfo_value_read (struct value *v)
|
||
{
|
||
LONGEST transferred;
|
||
|
||
/* If we can access registers, so can we access $_siginfo. Likewise
|
||
vice versa. */
|
||
validate_registers_access ();
|
||
|
||
transferred =
|
||
target_read (current_top_target (), TARGET_OBJECT_SIGNAL_INFO,
|
||
NULL,
|
||
value_contents_all_raw (v),
|
||
value_offset (v),
|
||
TYPE_LENGTH (value_type (v)));
|
||
|
||
if (transferred != TYPE_LENGTH (value_type (v)))
|
||
error (_("Unable to read siginfo"));
|
||
}
|
||
|
||
/* This function implements the lval_computed support for writing a
|
||
$_siginfo value. */
|
||
|
||
static void
|
||
siginfo_value_write (struct value *v, struct value *fromval)
|
||
{
|
||
LONGEST transferred;
|
||
|
||
/* If we can access registers, so can we access $_siginfo. Likewise
|
||
vice versa. */
|
||
validate_registers_access ();
|
||
|
||
transferred = target_write (current_top_target (),
|
||
TARGET_OBJECT_SIGNAL_INFO,
|
||
NULL,
|
||
value_contents_all_raw (fromval),
|
||
value_offset (v),
|
||
TYPE_LENGTH (value_type (fromval)));
|
||
|
||
if (transferred != TYPE_LENGTH (value_type (fromval)))
|
||
error (_("Unable to write siginfo"));
|
||
}
|
||
|
||
static const struct lval_funcs siginfo_value_funcs =
|
||
{
|
||
siginfo_value_read,
|
||
siginfo_value_write
|
||
};
|
||
|
||
/* Return a new value with the correct type for the siginfo object of
|
||
the current thread using architecture GDBARCH. Return a void value
|
||
if there's no object available. */
|
||
|
||
static struct value *
|
||
siginfo_make_value (struct gdbarch *gdbarch, struct internalvar *var,
|
||
void *ignore)
|
||
{
|
||
if (target_has_stack
|
||
&& inferior_ptid != null_ptid
|
||
&& gdbarch_get_siginfo_type_p (gdbarch))
|
||
{
|
||
struct type *type = gdbarch_get_siginfo_type (gdbarch);
|
||
|
||
return allocate_computed_value (type, &siginfo_value_funcs, NULL);
|
||
}
|
||
|
||
return allocate_value (builtin_type (gdbarch)->builtin_void);
|
||
}
|
||
|
||
|
||
/* infcall_suspend_state contains state about the program itself like its
|
||
registers and any signal it received when it last stopped.
|
||
This state must be restored regardless of how the inferior function call
|
||
ends (either successfully, or after it hits a breakpoint or signal)
|
||
if the program is to properly continue where it left off. */
|
||
|
||
class infcall_suspend_state
|
||
{
|
||
public:
|
||
/* Capture state from GDBARCH, TP, and REGCACHE that must be restored
|
||
once the inferior function call has finished. */
|
||
infcall_suspend_state (struct gdbarch *gdbarch,
|
||
const struct thread_info *tp,
|
||
struct regcache *regcache)
|
||
: m_thread_suspend (tp->suspend),
|
||
m_registers (new readonly_detached_regcache (*regcache))
|
||
{
|
||
gdb::unique_xmalloc_ptr<gdb_byte> siginfo_data;
|
||
|
||
if (gdbarch_get_siginfo_type_p (gdbarch))
|
||
{
|
||
struct type *type = gdbarch_get_siginfo_type (gdbarch);
|
||
size_t len = TYPE_LENGTH (type);
|
||
|
||
siginfo_data.reset ((gdb_byte *) xmalloc (len));
|
||
|
||
if (target_read (current_top_target (), TARGET_OBJECT_SIGNAL_INFO, NULL,
|
||
siginfo_data.get (), 0, len) != len)
|
||
{
|
||
/* Errors ignored. */
|
||
siginfo_data.reset (nullptr);
|
||
}
|
||
}
|
||
|
||
if (siginfo_data)
|
||
{
|
||
m_siginfo_gdbarch = gdbarch;
|
||
m_siginfo_data = std::move (siginfo_data);
|
||
}
|
||
}
|
||
|
||
/* Return a pointer to the stored register state. */
|
||
|
||
readonly_detached_regcache *registers () const
|
||
{
|
||
return m_registers.get ();
|
||
}
|
||
|
||
/* Restores the stored state into GDBARCH, TP, and REGCACHE. */
|
||
|
||
void restore (struct gdbarch *gdbarch,
|
||
struct thread_info *tp,
|
||
struct regcache *regcache) const
|
||
{
|
||
tp->suspend = m_thread_suspend;
|
||
|
||
if (m_siginfo_gdbarch == gdbarch)
|
||
{
|
||
struct type *type = gdbarch_get_siginfo_type (gdbarch);
|
||
|
||
/* Errors ignored. */
|
||
target_write (current_top_target (), TARGET_OBJECT_SIGNAL_INFO, NULL,
|
||
m_siginfo_data.get (), 0, TYPE_LENGTH (type));
|
||
}
|
||
|
||
/* The inferior can be gone if the user types "print exit(0)"
|
||
(and perhaps other times). */
|
||
if (target_has_execution)
|
||
/* NB: The register write goes through to the target. */
|
||
regcache->restore (registers ());
|
||
}
|
||
|
||
private:
|
||
/* How the current thread stopped before the inferior function call was
|
||
executed. */
|
||
struct thread_suspend_state m_thread_suspend;
|
||
|
||
/* The registers before the inferior function call was executed. */
|
||
std::unique_ptr<readonly_detached_regcache> m_registers;
|
||
|
||
/* Format of SIGINFO_DATA or NULL if it is not present. */
|
||
struct gdbarch *m_siginfo_gdbarch = nullptr;
|
||
|
||
/* The inferior format depends on SIGINFO_GDBARCH and it has a length of
|
||
TYPE_LENGTH (gdbarch_get_siginfo_type ()). For different gdbarch the
|
||
content would be invalid. */
|
||
gdb::unique_xmalloc_ptr<gdb_byte> m_siginfo_data;
|
||
};
|
||
|
||
infcall_suspend_state_up
|
||
save_infcall_suspend_state ()
|
||
{
|
||
struct thread_info *tp = inferior_thread ();
|
||
struct regcache *regcache = get_current_regcache ();
|
||
struct gdbarch *gdbarch = regcache->arch ();
|
||
|
||
infcall_suspend_state_up inf_state
|
||
(new struct infcall_suspend_state (gdbarch, tp, regcache));
|
||
|
||
/* Having saved the current state, adjust the thread state, discarding
|
||
any stop signal information. The stop signal is not useful when
|
||
starting an inferior function call, and run_inferior_call will not use
|
||
the signal due to its `proceed' call with GDB_SIGNAL_0. */
|
||
tp->suspend.stop_signal = GDB_SIGNAL_0;
|
||
|
||
return inf_state;
|
||
}
|
||
|
||
/* Restore inferior session state to INF_STATE. */
|
||
|
||
void
|
||
restore_infcall_suspend_state (struct infcall_suspend_state *inf_state)
|
||
{
|
||
struct thread_info *tp = inferior_thread ();
|
||
struct regcache *regcache = get_current_regcache ();
|
||
struct gdbarch *gdbarch = regcache->arch ();
|
||
|
||
inf_state->restore (gdbarch, tp, regcache);
|
||
discard_infcall_suspend_state (inf_state);
|
||
}
|
||
|
||
void
|
||
discard_infcall_suspend_state (struct infcall_suspend_state *inf_state)
|
||
{
|
||
delete inf_state;
|
||
}
|
||
|
||
readonly_detached_regcache *
|
||
get_infcall_suspend_state_regcache (struct infcall_suspend_state *inf_state)
|
||
{
|
||
return inf_state->registers ();
|
||
}
|
||
|
||
/* infcall_control_state contains state regarding gdb's control of the
|
||
inferior itself like stepping control. It also contains session state like
|
||
the user's currently selected frame. */
|
||
|
||
struct infcall_control_state
|
||
{
|
||
struct thread_control_state thread_control;
|
||
struct inferior_control_state inferior_control;
|
||
|
||
/* Other fields: */
|
||
enum stop_stack_kind stop_stack_dummy = STOP_NONE;
|
||
int stopped_by_random_signal = 0;
|
||
|
||
/* ID if the selected frame when the inferior function call was made. */
|
||
struct frame_id selected_frame_id {};
|
||
};
|
||
|
||
/* Save all of the information associated with the inferior<==>gdb
|
||
connection. */
|
||
|
||
infcall_control_state_up
|
||
save_infcall_control_state ()
|
||
{
|
||
infcall_control_state_up inf_status (new struct infcall_control_state);
|
||
struct thread_info *tp = inferior_thread ();
|
||
struct inferior *inf = current_inferior ();
|
||
|
||
inf_status->thread_control = tp->control;
|
||
inf_status->inferior_control = inf->control;
|
||
|
||
tp->control.step_resume_breakpoint = NULL;
|
||
tp->control.exception_resume_breakpoint = NULL;
|
||
|
||
/* Save original bpstat chain to INF_STATUS; replace it in TP with copy of
|
||
chain. If caller's caller is walking the chain, they'll be happier if we
|
||
hand them back the original chain when restore_infcall_control_state is
|
||
called. */
|
||
tp->control.stop_bpstat = bpstat_copy (tp->control.stop_bpstat);
|
||
|
||
/* Other fields: */
|
||
inf_status->stop_stack_dummy = stop_stack_dummy;
|
||
inf_status->stopped_by_random_signal = stopped_by_random_signal;
|
||
|
||
inf_status->selected_frame_id = get_frame_id (get_selected_frame (NULL));
|
||
|
||
return inf_status;
|
||
}
|
||
|
||
static void
|
||
restore_selected_frame (const frame_id &fid)
|
||
{
|
||
frame_info *frame = frame_find_by_id (fid);
|
||
|
||
/* If inf_status->selected_frame_id is NULL, there was no previously
|
||
selected frame. */
|
||
if (frame == NULL)
|
||
{
|
||
warning (_("Unable to restore previously selected frame."));
|
||
return;
|
||
}
|
||
|
||
select_frame (frame);
|
||
}
|
||
|
||
/* Restore inferior session state to INF_STATUS. */
|
||
|
||
void
|
||
restore_infcall_control_state (struct infcall_control_state *inf_status)
|
||
{
|
||
struct thread_info *tp = inferior_thread ();
|
||
struct inferior *inf = current_inferior ();
|
||
|
||
if (tp->control.step_resume_breakpoint)
|
||
tp->control.step_resume_breakpoint->disposition = disp_del_at_next_stop;
|
||
|
||
if (tp->control.exception_resume_breakpoint)
|
||
tp->control.exception_resume_breakpoint->disposition
|
||
= disp_del_at_next_stop;
|
||
|
||
/* Handle the bpstat_copy of the chain. */
|
||
bpstat_clear (&tp->control.stop_bpstat);
|
||
|
||
tp->control = inf_status->thread_control;
|
||
inf->control = inf_status->inferior_control;
|
||
|
||
/* Other fields: */
|
||
stop_stack_dummy = inf_status->stop_stack_dummy;
|
||
stopped_by_random_signal = inf_status->stopped_by_random_signal;
|
||
|
||
if (target_has_stack)
|
||
{
|
||
/* The point of the try/catch is that if the stack is clobbered,
|
||
walking the stack might encounter a garbage pointer and
|
||
error() trying to dereference it. */
|
||
try
|
||
{
|
||
restore_selected_frame (inf_status->selected_frame_id);
|
||
}
|
||
catch (const gdb_exception_error &ex)
|
||
{
|
||
exception_fprintf (gdb_stderr, ex,
|
||
"Unable to restore previously selected frame:\n");
|
||
/* Error in restoring the selected frame. Select the
|
||
innermost frame. */
|
||
select_frame (get_current_frame ());
|
||
}
|
||
}
|
||
|
||
delete inf_status;
|
||
}
|
||
|
||
void
|
||
discard_infcall_control_state (struct infcall_control_state *inf_status)
|
||
{
|
||
if (inf_status->thread_control.step_resume_breakpoint)
|
||
inf_status->thread_control.step_resume_breakpoint->disposition
|
||
= disp_del_at_next_stop;
|
||
|
||
if (inf_status->thread_control.exception_resume_breakpoint)
|
||
inf_status->thread_control.exception_resume_breakpoint->disposition
|
||
= disp_del_at_next_stop;
|
||
|
||
/* See save_infcall_control_state for info on stop_bpstat. */
|
||
bpstat_clear (&inf_status->thread_control.stop_bpstat);
|
||
|
||
delete inf_status;
|
||
}
|
||
|
||
/* See infrun.h. */
|
||
|
||
void
|
||
clear_exit_convenience_vars (void)
|
||
{
|
||
clear_internalvar (lookup_internalvar ("_exitsignal"));
|
||
clear_internalvar (lookup_internalvar ("_exitcode"));
|
||
}
|
||
|
||
|
||
/* User interface for reverse debugging:
|
||
Set exec-direction / show exec-direction commands
|
||
(returns error unless target implements to_set_exec_direction method). */
|
||
|
||
enum exec_direction_kind execution_direction = EXEC_FORWARD;
|
||
static const char exec_forward[] = "forward";
|
||
static const char exec_reverse[] = "reverse";
|
||
static const char *exec_direction = exec_forward;
|
||
static const char *const exec_direction_names[] = {
|
||
exec_forward,
|
||
exec_reverse,
|
||
NULL
|
||
};
|
||
|
||
static void
|
||
set_exec_direction_func (const char *args, int from_tty,
|
||
struct cmd_list_element *cmd)
|
||
{
|
||
if (target_can_execute_reverse)
|
||
{
|
||
if (!strcmp (exec_direction, exec_forward))
|
||
execution_direction = EXEC_FORWARD;
|
||
else if (!strcmp (exec_direction, exec_reverse))
|
||
execution_direction = EXEC_REVERSE;
|
||
}
|
||
else
|
||
{
|
||
exec_direction = exec_forward;
|
||
error (_("Target does not support this operation."));
|
||
}
|
||
}
|
||
|
||
static void
|
||
show_exec_direction_func (struct ui_file *out, int from_tty,
|
||
struct cmd_list_element *cmd, const char *value)
|
||
{
|
||
switch (execution_direction) {
|
||
case EXEC_FORWARD:
|
||
fprintf_filtered (out, _("Forward.\n"));
|
||
break;
|
||
case EXEC_REVERSE:
|
||
fprintf_filtered (out, _("Reverse.\n"));
|
||
break;
|
||
default:
|
||
internal_error (__FILE__, __LINE__,
|
||
_("bogus execution_direction value: %d"),
|
||
(int) execution_direction);
|
||
}
|
||
}
|
||
|
||
static void
|
||
show_schedule_multiple (struct ui_file *file, int from_tty,
|
||
struct cmd_list_element *c, const char *value)
|
||
{
|
||
fprintf_filtered (file, _("Resuming the execution of threads "
|
||
"of all processes is %s.\n"), value);
|
||
}
|
||
|
||
/* Implementation of `siginfo' variable. */
|
||
|
||
static const struct internalvar_funcs siginfo_funcs =
|
||
{
|
||
siginfo_make_value,
|
||
NULL,
|
||
NULL
|
||
};
|
||
|
||
/* Callback for infrun's target events source. This is marked when a
|
||
thread has a pending status to process. */
|
||
|
||
static void
|
||
infrun_async_inferior_event_handler (gdb_client_data data)
|
||
{
|
||
inferior_event_handler (INF_REG_EVENT, NULL);
|
||
}
|
||
|
||
void
|
||
_initialize_infrun (void)
|
||
{
|
||
struct cmd_list_element *c;
|
||
|
||
/* Register extra event sources in the event loop. */
|
||
infrun_async_inferior_event_token
|
||
= create_async_event_handler (infrun_async_inferior_event_handler, NULL);
|
||
|
||
add_info ("signals", info_signals_command, _("\
|
||
What debugger does when program gets various signals.\n\
|
||
Specify a signal as argument to print info on that signal only."));
|
||
add_info_alias ("handle", "signals", 0);
|
||
|
||
c = add_com ("handle", class_run, handle_command, _("\
|
||
Specify how to handle signals.\n\
|
||
Usage: handle SIGNAL [ACTIONS]\n\
|
||
Args are signals and actions to apply to those signals.\n\
|
||
If no actions are specified, the current settings for the specified signals\n\
|
||
will be displayed instead.\n\
|
||
\n\
|
||
Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
|
||
from 1-15 are allowed for compatibility with old versions of GDB.\n\
|
||
Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
|
||
The special arg \"all\" is recognized to mean all signals except those\n\
|
||
used by the debugger, typically SIGTRAP and SIGINT.\n\
|
||
\n\
|
||
Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
|
||
\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
|
||
Stop means reenter debugger if this signal happens (implies print).\n\
|
||
Print means print a message if this signal happens.\n\
|
||
Pass means let program see this signal; otherwise program doesn't know.\n\
|
||
Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
|
||
Pass and Stop may be combined.\n\
|
||
\n\
|
||
Multiple signals may be specified. Signal numbers and signal names\n\
|
||
may be interspersed with actions, with the actions being performed for\n\
|
||
all signals cumulatively specified."));
|
||
set_cmd_completer (c, handle_completer);
|
||
|
||
if (!dbx_commands)
|
||
stop_command = add_cmd ("stop", class_obscure,
|
||
not_just_help_class_command, _("\
|
||
There is no `stop' command, but you can set a hook on `stop'.\n\
|
||
This allows you to set a list of commands to be run each time execution\n\
|
||
of the program stops."), &cmdlist);
|
||
|
||
add_setshow_zuinteger_cmd ("infrun", class_maintenance, &debug_infrun, _("\
|
||
Set inferior debugging."), _("\
|
||
Show inferior debugging."), _("\
|
||
When non-zero, inferior specific debugging is enabled."),
|
||
NULL,
|
||
show_debug_infrun,
|
||
&setdebuglist, &showdebuglist);
|
||
|
||
add_setshow_boolean_cmd ("displaced", class_maintenance,
|
||
&debug_displaced, _("\
|
||
Set displaced stepping debugging."), _("\
|
||
Show displaced stepping debugging."), _("\
|
||
When non-zero, displaced stepping specific debugging is enabled."),
|
||
NULL,
|
||
show_debug_displaced,
|
||
&setdebuglist, &showdebuglist);
|
||
|
||
add_setshow_boolean_cmd ("non-stop", no_class,
|
||
&non_stop_1, _("\
|
||
Set whether gdb controls the inferior in non-stop mode."), _("\
|
||
Show whether gdb controls the inferior in non-stop mode."), _("\
|
||
When debugging a multi-threaded program and this setting is\n\
|
||
off (the default, also called all-stop mode), when one thread stops\n\
|
||
(for a breakpoint, watchpoint, exception, or similar events), GDB stops\n\
|
||
all other threads in the program while you interact with the thread of\n\
|
||
interest. When you continue or step a thread, you can allow the other\n\
|
||
threads to run, or have them remain stopped, but while you inspect any\n\
|
||
thread's state, all threads stop.\n\
|
||
\n\
|
||
In non-stop mode, when one thread stops, other threads can continue\n\
|
||
to run freely. You'll be able to step each thread independently,\n\
|
||
leave it stopped or free to run as needed."),
|
||
set_non_stop,
|
||
show_non_stop,
|
||
&setlist,
|
||
&showlist);
|
||
|
||
for (size_t i = 0; i < GDB_SIGNAL_LAST; i++)
|
||
{
|
||
signal_stop[i] = 1;
|
||
signal_print[i] = 1;
|
||
signal_program[i] = 1;
|
||
signal_catch[i] = 0;
|
||
}
|
||
|
||
/* Signals caused by debugger's own actions should not be given to
|
||
the program afterwards.
|
||
|
||
Do not deliver GDB_SIGNAL_TRAP by default, except when the user
|
||
explicitly specifies that it should be delivered to the target
|
||
program. Typically, that would occur when a user is debugging a
|
||
target monitor on a simulator: the target monitor sets a
|
||
breakpoint; the simulator encounters this breakpoint and halts
|
||
the simulation handing control to GDB; GDB, noting that the stop
|
||
address doesn't map to any known breakpoint, returns control back
|
||
to the simulator; the simulator then delivers the hardware
|
||
equivalent of a GDB_SIGNAL_TRAP to the program being
|
||
debugged. */
|
||
signal_program[GDB_SIGNAL_TRAP] = 0;
|
||
signal_program[GDB_SIGNAL_INT] = 0;
|
||
|
||
/* Signals that are not errors should not normally enter the debugger. */
|
||
signal_stop[GDB_SIGNAL_ALRM] = 0;
|
||
signal_print[GDB_SIGNAL_ALRM] = 0;
|
||
signal_stop[GDB_SIGNAL_VTALRM] = 0;
|
||
signal_print[GDB_SIGNAL_VTALRM] = 0;
|
||
signal_stop[GDB_SIGNAL_PROF] = 0;
|
||
signal_print[GDB_SIGNAL_PROF] = 0;
|
||
signal_stop[GDB_SIGNAL_CHLD] = 0;
|
||
signal_print[GDB_SIGNAL_CHLD] = 0;
|
||
signal_stop[GDB_SIGNAL_IO] = 0;
|
||
signal_print[GDB_SIGNAL_IO] = 0;
|
||
signal_stop[GDB_SIGNAL_POLL] = 0;
|
||
signal_print[GDB_SIGNAL_POLL] = 0;
|
||
signal_stop[GDB_SIGNAL_URG] = 0;
|
||
signal_print[GDB_SIGNAL_URG] = 0;
|
||
signal_stop[GDB_SIGNAL_WINCH] = 0;
|
||
signal_print[GDB_SIGNAL_WINCH] = 0;
|
||
signal_stop[GDB_SIGNAL_PRIO] = 0;
|
||
signal_print[GDB_SIGNAL_PRIO] = 0;
|
||
|
||
/* These signals are used internally by user-level thread
|
||
implementations. (See signal(5) on Solaris.) Like the above
|
||
signals, a healthy program receives and handles them as part of
|
||
its normal operation. */
|
||
signal_stop[GDB_SIGNAL_LWP] = 0;
|
||
signal_print[GDB_SIGNAL_LWP] = 0;
|
||
signal_stop[GDB_SIGNAL_WAITING] = 0;
|
||
signal_print[GDB_SIGNAL_WAITING] = 0;
|
||
signal_stop[GDB_SIGNAL_CANCEL] = 0;
|
||
signal_print[GDB_SIGNAL_CANCEL] = 0;
|
||
signal_stop[GDB_SIGNAL_LIBRT] = 0;
|
||
signal_print[GDB_SIGNAL_LIBRT] = 0;
|
||
|
||
/* Update cached state. */
|
||
signal_cache_update (-1);
|
||
|
||
add_setshow_zinteger_cmd ("stop-on-solib-events", class_support,
|
||
&stop_on_solib_events, _("\
|
||
Set stopping for shared library events."), _("\
|
||
Show stopping for shared library events."), _("\
|
||
If nonzero, gdb will give control to the user when the dynamic linker\n\
|
||
notifies gdb of shared library events. The most common event of interest\n\
|
||
to the user would be loading/unloading of a new library."),
|
||
set_stop_on_solib_events,
|
||
show_stop_on_solib_events,
|
||
&setlist, &showlist);
|
||
|
||
add_setshow_enum_cmd ("follow-fork-mode", class_run,
|
||
follow_fork_mode_kind_names,
|
||
&follow_fork_mode_string, _("\
|
||
Set debugger response to a program call of fork or vfork."), _("\
|
||
Show debugger response to a program call of fork or vfork."), _("\
|
||
A fork or vfork creates a new process. follow-fork-mode can be:\n\
|
||
parent - the original process is debugged after a fork\n\
|
||
child - the new process is debugged after a fork\n\
|
||
The unfollowed process will continue to run.\n\
|
||
By default, the debugger will follow the parent process."),
|
||
NULL,
|
||
show_follow_fork_mode_string,
|
||
&setlist, &showlist);
|
||
|
||
add_setshow_enum_cmd ("follow-exec-mode", class_run,
|
||
follow_exec_mode_names,
|
||
&follow_exec_mode_string, _("\
|
||
Set debugger response to a program call of exec."), _("\
|
||
Show debugger response to a program call of exec."), _("\
|
||
An exec call replaces the program image of a process.\n\
|
||
\n\
|
||
follow-exec-mode can be:\n\
|
||
\n\
|
||
new - the debugger creates a new inferior and rebinds the process\n\
|
||
to this new inferior. The program the process was running before\n\
|
||
the exec call can be restarted afterwards by restarting the original\n\
|
||
inferior.\n\
|
||
\n\
|
||
same - the debugger keeps the process bound to the same inferior.\n\
|
||
The new executable image replaces the previous executable loaded in\n\
|
||
the inferior. Restarting the inferior after the exec call restarts\n\
|
||
the executable the process was running after the exec call.\n\
|
||
\n\
|
||
By default, the debugger will use the same inferior."),
|
||
NULL,
|
||
show_follow_exec_mode_string,
|
||
&setlist, &showlist);
|
||
|
||
add_setshow_enum_cmd ("scheduler-locking", class_run,
|
||
scheduler_enums, &scheduler_mode, _("\
|
||
Set mode for locking scheduler during execution."), _("\
|
||
Show mode for locking scheduler during execution."), _("\
|
||
off == no locking (threads may preempt at any time)\n\
|
||
on == full locking (no thread except the current thread may run)\n\
|
||
This applies to both normal execution and replay mode.\n\
|
||
step == scheduler locked during stepping commands (step, next, stepi, nexti).\n\
|
||
In this mode, other threads may run during other commands.\n\
|
||
This applies to both normal execution and replay mode.\n\
|
||
replay == scheduler locked in replay mode and unlocked during normal execution."),
|
||
set_schedlock_func, /* traps on target vector */
|
||
show_scheduler_mode,
|
||
&setlist, &showlist);
|
||
|
||
add_setshow_boolean_cmd ("schedule-multiple", class_run, &sched_multi, _("\
|
||
Set mode for resuming threads of all processes."), _("\
|
||
Show mode for resuming threads of all processes."), _("\
|
||
When on, execution commands (such as 'continue' or 'next') resume all\n\
|
||
threads of all processes. When off (which is the default), execution\n\
|
||
commands only resume the threads of the current process. The set of\n\
|
||
threads that are resumed is further refined by the scheduler-locking\n\
|
||
mode (see help set scheduler-locking)."),
|
||
NULL,
|
||
show_schedule_multiple,
|
||
&setlist, &showlist);
|
||
|
||
add_setshow_boolean_cmd ("step-mode", class_run, &step_stop_if_no_debug, _("\
|
||
Set mode of the step operation."), _("\
|
||
Show mode of the step operation."), _("\
|
||
When set, doing a step over a function without debug line information\n\
|
||
will stop at the first instruction of that function. Otherwise, the\n\
|
||
function is skipped and the step command stops at a different source line."),
|
||
NULL,
|
||
show_step_stop_if_no_debug,
|
||
&setlist, &showlist);
|
||
|
||
add_setshow_auto_boolean_cmd ("displaced-stepping", class_run,
|
||
&can_use_displaced_stepping, _("\
|
||
Set debugger's willingness to use displaced stepping."), _("\
|
||
Show debugger's willingness to use displaced stepping."), _("\
|
||
If on, gdb will use displaced stepping to step over breakpoints if it is\n\
|
||
supported by the target architecture. If off, gdb will not use displaced\n\
|
||
stepping to step over breakpoints, even if such is supported by the target\n\
|
||
architecture. If auto (which is the default), gdb will use displaced stepping\n\
|
||
if the target architecture supports it and non-stop mode is active, but will not\n\
|
||
use it in all-stop mode (see help set non-stop)."),
|
||
NULL,
|
||
show_can_use_displaced_stepping,
|
||
&setlist, &showlist);
|
||
|
||
add_setshow_enum_cmd ("exec-direction", class_run, exec_direction_names,
|
||
&exec_direction, _("Set direction of execution.\n\
|
||
Options are 'forward' or 'reverse'."),
|
||
_("Show direction of execution (forward/reverse)."),
|
||
_("Tells gdb whether to execute forward or backward."),
|
||
set_exec_direction_func, show_exec_direction_func,
|
||
&setlist, &showlist);
|
||
|
||
/* Set/show detach-on-fork: user-settable mode. */
|
||
|
||
add_setshow_boolean_cmd ("detach-on-fork", class_run, &detach_fork, _("\
|
||
Set whether gdb will detach the child of a fork."), _("\
|
||
Show whether gdb will detach the child of a fork."), _("\
|
||
Tells gdb whether to detach the child of a fork."),
|
||
NULL, NULL, &setlist, &showlist);
|
||
|
||
/* Set/show disable address space randomization mode. */
|
||
|
||
add_setshow_boolean_cmd ("disable-randomization", class_support,
|
||
&disable_randomization, _("\
|
||
Set disabling of debuggee's virtual address space randomization."), _("\
|
||
Show disabling of debuggee's virtual address space randomization."), _("\
|
||
When this mode is on (which is the default), randomization of the virtual\n\
|
||
address space is disabled. Standalone programs run with the randomization\n\
|
||
enabled by default on some platforms."),
|
||
&set_disable_randomization,
|
||
&show_disable_randomization,
|
||
&setlist, &showlist);
|
||
|
||
/* ptid initializations */
|
||
inferior_ptid = null_ptid;
|
||
target_last_wait_ptid = minus_one_ptid;
|
||
|
||
gdb::observers::thread_ptid_changed.attach (infrun_thread_ptid_changed);
|
||
gdb::observers::thread_stop_requested.attach (infrun_thread_stop_requested);
|
||
gdb::observers::thread_exit.attach (infrun_thread_thread_exit);
|
||
gdb::observers::inferior_exit.attach (infrun_inferior_exit);
|
||
|
||
/* Explicitly create without lookup, since that tries to create a
|
||
value with a void typed value, and when we get here, gdbarch
|
||
isn't initialized yet. At this point, we're quite sure there
|
||
isn't another convenience variable of the same name. */
|
||
create_internalvar_type_lazy ("_siginfo", &siginfo_funcs, NULL);
|
||
|
||
add_setshow_boolean_cmd ("observer", no_class,
|
||
&observer_mode_1, _("\
|
||
Set whether gdb controls the inferior in observer mode."), _("\
|
||
Show whether gdb controls the inferior in observer mode."), _("\
|
||
In observer mode, GDB can get data from the inferior, but not\n\
|
||
affect its execution. Registers and memory may not be changed,\n\
|
||
breakpoints may not be set, and the program cannot be interrupted\n\
|
||
or signalled."),
|
||
set_observer_mode,
|
||
show_observer_mode,
|
||
&setlist,
|
||
&showlist);
|
||
}
|