binutils-gdb/sim/ppc/local.mk
Alan Modra 93f83dcc94 sim: no rule to make sim/ppc/Makefile.in
Seen with --enable-maintainer-mode.
make[3]: *** No rule to make target '.../sim/ppc/Makefile.in', needed
by 'ppc/stamp-pk'.  Stop.

	* sim/ppc/local.mk (stamp-pk): Depend on local.mk not
	Makefile.in.
	* Makefile.in: Regenerate.

Approved-By: Tom Tromey <tom@tromey.com>
2024-02-24 11:52:10 +10:30

289 lines
8.0 KiB
Makefile

## See sim/Makefile.am
##
## Copyright (C) 1994-2024 Free Software Foundation, Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 3 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program. If not, see <http://www.gnu.org/licenses/>.
AM_CPPFLAGS_%C% = \
-DHAVE_COMMON_FPU \
$(sim_ppc_smp) \
$(sim_ppc_xor_endian) \
$(sim_ppc_bitsize) \
$(sim_ppc_timebase) \
$(sim_ppc_float) \
$(sim_ppc_monitor) \
$(sim_ppc_model) $(sim_ppc_default_model) $(sim_ppc_model_issue) \
$(sim_ppc_switch)
AM_CPPFLAGS_%C%_options.o = '-DOPCODE_RULES="$(IGEN_OPCODE_RULES)"' '-DIGEN_FLAGS="$(ppc_IGEN_FLAGS)"'
%C%_libsim_a_SOURCES = \
$(common_libcommon_a_SOURCES)
%C%_libsim_a_LIBADD = \
%D%/debug.o \
%D%/bits.o \
%D%/sim-endian.o \
%D%/os_emul.o \
%D%/emul_generic.o \
%D%/emul_bugapi.o \
%D%/emul_chirp.o \
%D%/emul_netbsd.o \
%D%/emul_unix.o \
%D%/registers.o \
%D%/vm.o \
%D%/corefile.o \
%D%/model.o \
%D%/spreg.o \
%D%/cpu.o \
%D%/interrupts.o \
%D%/events.o \
%D%/cap.o \
%D%/device.o \
%D%/tree.o \
%D%/device_table.o \
%D%/itable.o \
%D%/mon.o \
%D%/icache.o \
%D%/semantics.o \
%D%/idecode.o \
%D%/support.o \
%D%/sim-fpu.o \
%D%/psim.o \
%D%/pk_disklabel.o \
$(patsubst %,%D%/%,$(sim_ppc_hw_obj)) \
%D%/options.o \
%D%/gdb-sim.o \
%D%/sim_calls.o
noinst_LIBRARIES += %D%/libsim.a
%D%/%.o: common/%.c ; $(SIM_COMPILE)
-@am__include@ %D%/$(DEPDIR)/*.Po
%C%_run_SOURCES = \
%D%/main.c
%C%_run_LDADD = \
%D%/libsim.a \
$(SIM_COMMON_LIBS)
noinst_PROGRAMS += %D%/run
%D%/defines.h: %D%/stamp-defines ; @true
%D%/stamp-defines: config.h Makefile
$(AM_V_GEN)$(SED) -n -e '/^#define HAVE_.*1$$/{ s/ 1$$/",/; s/.* HAVE_/"HAVE_/; p }' < config.h > %D%/defines.hin
$(AM_V_at)$(SHELL) $(srcroot)/move-if-change %D%/defines.hin %D%/defines.h
$(AM_V_at)touch $@
BUILT_SOURCES += %D%/defines.h
MOSTLYCLEANFILES += %D%/defines.h %D%/stamp-defines
%D%/spreg.c: @MAINT@ %D%/ppc-spr-table %D%/spreg-gen.py %D%/$(am__dirstamp)
$(AM_V_GEN)$(srcdir)/%D%/spreg-gen.py --source $@.tmp
$(AM_V_at)$(SHELL) $(srcroot)/move-if-change $@.tmp $(srcdir)/%D%/spreg.c
$(AM_V_at)touch $(srcdir)/%D%/spreg.c
%D%/spreg.h: @MAINT@ %D%/ppc-spr-table %D%/spreg-gen.py %D%/$(am__dirstamp)
$(AM_V_GEN)$(srcdir)/%D%/spreg-gen.py --header $@.tmp
$(AM_V_at)$(SHELL) $(srcroot)/move-if-change $@.tmp $(srcdir)/%D%/spreg.h
$(AM_V_at)touch $(srcdir)/%D%/spreg.h
EXTRA_LIBRARIES += %D%/libigen.a
%C%_libigen_a_SOURCES = \
%D%/table.c \
%D%/lf-ppc.c \
%D%/dumpf.c \
%D%/ld-decode.c \
%D%/ld-cache.c \
%D%/filter-ppc.c \
%D%/ld-insn.c \
%D%/gen-model.c \
%D%/gen-itable.c \
%D%/gen-icache.c \
%D%/gen-semantics.c \
%D%/gen-idecode.c \
%D%/gen-support.c
%C%_libigen_a_LIBADD = \
igen/filter.o \
igen/filter_host.o \
igen/lf.o \
igen/misc.o
%C%_igen_SOURCES = %D%/igen.c
%C%_igen_LDADD = %D%/libigen.a
# igen leaks memory, and therefore makes AddressSanitizer unhappy. Disable
# leak detection while running it.
PPC_IGEN = %D%/igen$(EXEEXT)
PPC_IGEN_RUN = ASAN_OPTIONS=detect_leaks=0 $(PPC_IGEN) $(%C%_IGEN_FLAGS)
%C%_IGEN_FLAGS = \
@sim_ppc_decode_mechanism@ \
@sim_ppc_dup@ \
@sim_ppc_jump@ \
@sim_ppc_filter@ \
@sim_ppc_icache@ \
@sim_ppc_igen_smp@ \
@sim_ppc_line_nr@
## List all generated headers to help Automake dependency tracking.
BUILT_SOURCES += \
%D%/icache.h \
%D%/idecode.h \
%D%/semantics.h \
%D%/model.h \
%D%/support.h \
%D%/itable.h
%C%_BUILT_SRC_FROM_IGEN = \
%D%/icache.h \
%D%/icache.c \
%D%/idecode.h \
%D%/idecode.c \
%D%/semantics.h \
%D%/semantics.c \
%D%/model.h \
%D%/model.c \
%D%/support.h \
%D%/support.c \
%D%/itable.h \
%D%/itable.c
%C%_BUILD_OUTPUTS = \
$(%C%_BUILT_SRC_FROM_IGEN) \
%D%/stamp-igen
$(%C%_BUILT_SRC_FROM_IGEN): %D%/stamp-igen
%C%_IGEN_OPCODE_RULES = %D%/@sim_ppc_opcode@
%D%/stamp-igen: %D%/powerpc.igen %D%/altivec.igen %D%/e500.igen $(%C%_IGEN_OPCODE_RULES) $(PPC_IGEN)
$(AM_V_GEN)$(PPC_IGEN_RUN) \
-o $(srcdir)/$(%C%_IGEN_OPCODE_RULES) \
-I $(srcdir)/%D% -i $(srcdir)/%D%/powerpc.igen \
-n icache.h -hc %D%/icache.h \
-n icache.c -c %D%/icache.c \
-n semantics.h -hs %D%/semantics.h \
-n semantics.c -s %D%/semantics.c \
-n idecode.h -hd %D%/idecode.h \
-n idecode.c -d %D%/idecode.c \
-n itable.h -ht %D%/itable.h \
-n itable.c -t %D%/itable.c \
-n model.h -hm %D%/model.h \
-n model.c -m %D%/model.c \
-n support.h -hf %D%/support.h \
-n support.c -f %D%/support.c
$(AM_V_at)touch $@
MOSTLYCLEANFILES += $(%C%_BUILD_OUTPUTS)
## These rules are copied from automake, but tweaked to use FOR_BUILD variables.
%D%/libigen.a: $(%C%_libigen_a_OBJECTS) $(%C%_libigen_a_DEPENDENCIES) $(EXTRA_%C%_libigen_a_DEPENDENCIES) %D%/$(am__dirstamp)
$(AM_V_at)-rm -f $@
$(AM_V_AR)$(AR_FOR_BUILD) $(ARFLAGS) $@ $(%C%_libigen_a_OBJECTS) $(%C%_libigen_a_LIBADD)
$(AM_V_at)$(RANLIB_FOR_BUILD) $@
## igen is a build-time only tool. Override the default rules for it.
%D%/igen$(EXEEXT): $(%C%_igen_OBJECTS) $(%C%_igen_DEPENDENCIES) %D%/$(am__dirstamp)
$(AM_V_CCLD)$(LINK_FOR_BUILD) $(%C%_igen_OBJECTS) $(%C%_igen_LDADD)
$(%C%_libigen_a_OBJECTS) $(%C%_igen_OBJECTS): %D%/%.o: %D%/%.c
$(AM_V_CC)$(COMPILE_FOR_BUILD) -I$(srcdir)/igen -I$(srcdir)/%D% -c $< -o $@
## Build some of the files in standalone mode for developers of igen itself.
%D%/%-main.o: %D%/%.c
$(AM_V_CC)$(COMPILE_FOR_BUILD) -DMAIN -c $< -o $@
%C%_ld_cache_SOURCES =
%C%_ld_cache_LDADD = %D%/ld-cache-main.o %D%/libigen.a
%C%_ld_decode_SOURCES =
%C%_ld_decode_LDADD = %D%/ld-decode-main.o %D%/libigen.a
%C%_ld_insn_SOURCES =
%C%_ld_insn_LDADD = %D%/ld-insn-main.o %D%/libigen.a
%C%_IGEN_TOOLS = \
$(PPC_IGEN) \
%D%/ld-cache \
%D%/ld-decode \
%D%/ld-insn
EXTRA_PROGRAMS += $(%C%_IGEN_TOOLS)
MOSTLYCLEANFILES += $(%C%_IGEN_TOOLS) %D%/libigen.a
IGEN_OPCODE_RULES = @sim_ppc_opcode@
## Real hardware.
## NB: The first for loop is to remove duplicates.
%C%_HW_SRC = $(sim_ppc_hw_src:%=%D%/%)
%D%/hw.c %D%/hw.h: %D%/stamp-hw ; @true
%D%/stamp-hw: Makefile $(%C%_HW_SRC) $(srcroot)/move-if-change
$(AM_V_GEN)\
f=""; \
for i in $(%C%_HW_SRC) ; do \
case " $$f " in \
*" $$i "*) ;; \
*) f="$$f $$i" ;; \
esac ; \
done ; \
for hw in $$f ; do echo $$hw ; done \
| sed -e 's/^.*\(hw_.*\)\.c/\1/' \
-e 's/^/extern const device_descriptor /' \
-e 's/$$/_device_descriptor\[\];/' \
> %D%/hw.hin; \
f=""; \
for i in $(%C%_HW_SRC) ; do \
case " $$f " in \
*" $$i "*) ;; \
*) f="$$f $$i" ;; \
esac ; \
done ; \
for hw in $$f ; do echo $$hw ; done \
| sed -e 's/^.*\(hw_.*\)\.c/\1/' \
-e 's/^/ /' \
-e 's/$$/_device_descriptor,/' \
> %D%/hw.cin
$(AM_V_at)$(SHELL) $(srcroot)/move-if-change %D%/hw.hin %D%/hw.h
$(AM_V_at)$(SHELL) $(srcroot)/move-if-change %D%/hw.cin %D%/hw.c
$(AM_V_at)touch $@
BUILT_SOURCES += \
%D%/hw.h
%C%_BUILD_OUTPUTS += \
%D%/hw.c \
%D%/hw.h \
%D%/stamp-hw
%D%/hw.c %D%/hw.h: %D%/stamp-igen
## Real packages
## NB: The first for loop is to remove duplicates.
%C%_PACKAGE_SRC = %D%/pk_disklabel.c
$(srcdir)/%D%/pk.h: @MAINT@ %D%/stamp-pk ; @true
%D%/stamp-pk: $(srcdir)/%D%/local.mk $(%C%_PACKAGE_SRC) $(srcroot)/move-if-change
$(AM_V_GEN)echo "/* Generated file by local.mk; do not edit. */" > %D%/pk.hin; \
f=""; \
for i in $(%C%_PACKAGE_SRC) ; do \
case " $$f " in \
*" $$i "*) ;; \
*) f="$$f $$i" ;; \
esac ; \
done ; \
for pk in $$f ; do echo $$pk ; done \
| sed -e 's/^.*pk_\(.*\)\.c/\1/' \
-e 's/^/extern package_create_instance_callback pk_/' \
-e 's/$$/_create_instance;/' \
>> %D%/pk.hin
$(AM_V_at)$(SHELL) $(srcroot)/move-if-change %D%/pk.hin $(srcdir)/%D%/pk.h
$(AM_V_at)touch $@
%C%_BUILD_OUTPUTS += %D%/stamp-pk
%C%docdir = $(docdir)/%C%
%C%doc_DATA = %D%/BUGS %D%/INSTALL %D%/README %D%/RUN