Commit Graph

332 Commits

Author SHA1 Message Date
Maciej W. Rozycki
df26367c79 bfd/
* config.bfd: Replace alpha*-*-linuxecoff* pattern with
	alpha*-*-linux*ecoff*.

	binutils/testsuite/
	* lib/binutils-common.exp (is_elf_format): Also exclude
	*-*-linux*ecoff*.

	gas/
	* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
	alpha*-*-linux*ecoff*.

	ld/
	* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
	alpha*-*-linux*ecoff*.  Update the `sed' pattern used to convert
	from alpha*-*-linux-* to alpha*-*-linux*ecoff*.
2013-05-01 17:27:46 +00:00
Alan Modra
49926cd0c8 bfd/
* config.bfd: Add powerpc64le-linux.
gas/
	* configure.in: Allow little-endian linux.
	* configure: Regenerate.
gold/
	* configure.tgt: Add powerpcle and powerpc64le.
ld/
	* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32lppclinux.c.
	(eelf32lppclinux.c): New rule.
	* Makefile.in: Regenerate.
	* configure.tgt: Merge powerpc-linux and other powerpc-elf targets
	with corresponding little-endian targets.
	* emulparams/elf32lppc.sh: Update comment.
	* emulparams/elf32lppclinux.sh: New.
2013-04-25 13:22:52 +00:00
H.J. Lu
05567e3d0b Enable x32 for x86_64-*-elf*
This patch enables x32 for x86_64-*-elf* for embedded target and disables
rex tests since it uses '/' as prefix separator which is `\' for
x86_64-*-elf*.

bfd/

	* config.bfd (targ_selvecs): Add bfd_elf32_x86_64_vec for
	x86_64-*-elf*.

gas/testsuite/

	* gas/i386/rex.d: Skip x86_64-*-elf*.
	* gas/i386/ilp32/rex.d: Likewise.

ld/

	* configure.tgt (targ_extra_emuls): Adds elf32_x86_64 for
	x86_64-*-elf*.
	(targ_extra_libpath): Likewise.
	(tdir_elf_i386): Replace x86_64 with i386 for x86_64-*-elf*.
2013-04-24 18:58:14 +00:00
Corinna Vinschen
a07ee50e95 * configure.host: Add x86_64-*-cygwin* as valid host.
* configure.tgt: Add x86_64-*-cygwin* as valid target.
	* emultempl/pep.em: Handle different requirements for Cygwin in terms
	of start addresses for executables and DLLs, based on memory model in
	http://cygwin.com/ml/cygwin-developers/2013-02/msg00027.html
2013-03-05 11:54:29 +00:00
Sandra Loosemore
36591ba149 2013-02-06 Sandra Loosemore <sandra@codesourcery.com>
Andrew Jenner <andrew@codesourcery.com>

	Based on patches from Altera Corporation.

	bfd/
	* Makefile.am (ALL_MACHINES): Add cpu-nios2.lo.
	(ALL_MACHINES_CFILES): Add cpu-nios2.c.
	(BFD_BACKENDS): Add elf32-nios2.lo.
	(BFD32_BACKENDS_CFILES): Add elf32-nios2.c.
	* Makefile.in: Regenerated.
	* configure.in: Add entries for bfd_elf32_bignios2_vec and
	bfd_elf32_littlenios2_vec.
	* configure: Regenerated.
	* config.bfd: Add cases for nios2.
	* archures.c (enum bfd_architecture): Add bfd_arch_nios2.
	(bfd_mach_nios2): Define.
	(bfd_nios2_arch): Declare.
	(bfd_archures_list): Add bfd_nios2_arch.
	* targets.c (bfd_elf32_bignios2_vec): Declare.
	(bfd_elf32_littlenios2_vec): Declare.
	(_bfd_target_vector): Add entries for bfd_elf32_bignios2_vec and
	bfd_elf32_littlenios2_vec.
	* elf-bfd.h (enum elf_target_id): Add NIOS2_ELF_DATA.
	* reloc.c (enum bfd_reloc_code_real): Add Nios II relocations.
	* bfd-in2.h: Regenerated.
	* libbfd.h: Regenerated.
	* cpu-nios2.c: New file.
	* elf32-nios2.c: New file.

	opcodes/
	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add nios2-dis.c and
	nios2-opc.c.
	* Makefile.in: Regenerated.
	* configure.in: Add case for bfd_nios2_arch.
	* configure: Regenerated.
	* disassemble.c (ARCH_nios2): Define.
	(disassembler): Add case for bfd_arch_nios2.
	* nios2-dis.c: New file.
	* nios2-opc.c: New file.

	include/
	* dis-asm.h (print_insn_big_nios2): Declare.
	(print_insn_little_nios2): Declare.

	include/elf
	* nios2.h: New file.

	include/opcode/
	* nios2.h: New file.

	gas/
	* Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c.
	(TARGET_CPU_HFILES): Add config/tc-nios2.h.
	* Makefile.in: Regenerated.
	* configure.tgt: Add case for nios2*-linux*.
	* config/obj-elf.c: Conditionally include elf/nios2.h.
	* config/tc-nios2.c: New file.
	* config/tc-nios2.h: New file.
	* doc/Makefile.am (CPU_DOCS): Add c-nios2.texi.
	* doc/Makefile.in: Regenerated.
	* doc/all.texi: Set NIOSII.
	* doc/as.texinfo (Overview): Add Nios II options.
	(Machine Dependencies): Include c-nios2.texi.
	* doc/c-nios2.texi: New file.
	* NEWS: Note Altera Nios II support.

	gas/testsuite/
	* gas/nios2/add.d: New.
	* gas/nios2/add.s: New.
	* gas/nios2/align_fill.d: New.
	* gas/nios2/align_fill.s: New.
	* gas/nios2/align_text.d: New.
	* gas/nios2/align_text.s: New.
	* gas/nios2/and.d: New.
	* gas/nios2/and.s: New.
	* gas/nios2/branch.d: New.
	* gas/nios2/branch.s: New.
	* gas/nios2/break.d: New.
	* gas/nios2/break.s: New.
	* gas/nios2/bret.d: New.
	* gas/nios2/bret.s: New.
	* gas/nios2/cache.d: New.
	* gas/nios2/cache.s: New.
	* gas/nios2/call26.d: New.
	* gas/nios2/call26.s: New.
	* gas/nios2/call.d: New.
	* gas/nios2/call.s: New.
	* gas/nios2/cmp.d: New.
	* gas/nios2/cmp.s: New.
	* gas/nios2/comments.d: New.
	* gas/nios2/comments.s: New.
	* gas/nios2/complex.d: New.
	* gas/nios2/complex.s: New.
	* gas/nios2/ctl.d: New.
	* gas/nios2/ctl.s: New.
	* gas/nios2/custom.d: New.
	* gas/nios2/custom.s: New.
	* gas/nios2/etbt.d: New.
	* gas/nios2/etbt.s: New.
	* gas/nios2/flushda.d: New.
	* gas/nios2/flushda.s: New.
	* gas/nios2/illegal.l: New.
	* gas/nios2/illegal.s: New.
	* gas/nios2/jmp.d: New.
	* gas/nios2/jmp.s: New.
	* gas/nios2/ldb.d: New.
	* gas/nios2/ldb.s: New.
	* gas/nios2/ldh.d: New.
	* gas/nios2/ldh.s: New.
	* gas/nios2/ldw.d: New.
	* gas/nios2/ldw.s: New.
	* gas/nios2/lineseparator.d: New.
	* gas/nios2/lineseparator.s: New.
	* gas/nios2/mov.d: New.
	* gas/nios2/movia.d: New.
	* gas/nios2/movia.s: New.
	* gas/nios2/movi.d: New.
	* gas/nios2/movi.s: New.
	* gas/nios2/mov.s: New.
	* gas/nios2/mul.d: New.
	* gas/nios2/mul.s: New.
	* gas/nios2/nios2.exp: New.
	* gas/nios2/nor.d: New.
	* gas/nios2/nor.s: New.
	* gas/nios2/or.d: New.
	* gas/nios2/or.s: New.
	* gas/nios2/ret.d: New.
	* gas/nios2/ret.s: New.
	* gas/nios2/rol.d: New.
	* gas/nios2/rol.s: New.
	* gas/nios2/rotate.d: New.
	* gas/nios2/rotate.s: New.
	* gas/nios2/stb.d: New.
	* gas/nios2/stb.s: New.
	* gas/nios2/sth.d: New.
	* gas/nios2/sth.s: New.
	* gas/nios2/stw.d: New.
	* gas/nios2/stw.s: New.
	* gas/nios2/sub.d: New.
	* gas/nios2/sub.s: New.
	* gas/nios2/sync.d: New.
	* gas/nios2/sync.s: New.
	* gas/nios2/trap.d: New.
	* gas/nios2/trap.s: New.
	* gas/nios2/tret.d: New.
	* gas/nios2/tret.s: New.
	* gas/nios2/warn_noat.l: New.
	* gas/nios2/warn_noat.s: New.
	* gas/nios2/warn_nobreak.l: New.
	* gas/nios2/warn_nobreak.s: New.
	* gas/nios2/xor.d: New.
	* gas/nios2/xor.s: New.

	ld/
	* Makefile.am (enios2elf.c): New rule.
	* Makefile.in: Regenerated.
	* configure.tgt: Add case for nios2*-*-*.
	* emulparams/nios2elf.sh: New file.
	* NEWS: Note Altera Nios II support.

	ld/testsuite/
	* ld-nios2/emit-relocs-1a.s: New.
	* ld-nios2/emit-relocs-1b.s: New.
	* ld-nios2/emit-relocs-1.d: New.
	* ld-nios2/emit-relocs-1.ld: New.
	* ld-nios2/gprel.d: New.
	* ld-nios2/gprel.s: New.
	* ld-nios2/hilo16.d: New.
	* ld-nios2/hilo16.s: New.
	* ld-nios2/hilo16_symbol.s: New.
	* ld-nios2/imm5.d: New.
	* ld-nios2/imm5.s: New.
	* ld-nios2/imm5_symbol.s: New.
	* ld-nios2/nios2.exp: New.
	* ld-nios2/pcrel16.d: New.
	* ld-nios2/pcrel16_label.s: New.
	* ld-nios2/pcrel16.s: New.
	* ld-nios2/relax_callr.d: New.
	* ld-nios2/relax_callr.ld: New.
	* ld-nios2/relax_callr.s: New.
	* ld-nios2/relax_cjmp.d: New.
	* ld-nios2/relax_cjmp.s: New.
	* ld-nios2/relax_jmp.ld: New.
	* ld-nios2/relax_section.d: New.
	* ld-nios2/relax_section.s: New.
	* ld-nios2/relax_ujmp.d: New.
	* ld-nios2/relax_ujmp.s: New.
	* ld-nios2/reloc.d: New.
	* ld-nios2/reloc.s: New.
	* ld-nios2/reloc_symbol.s: New.
	* ld-nios2/s16.d: New.
	* ld-nios2/s16.s: New.
	* ld-nios2/s16_symbol.s: New.
	* ld-nios2/u16.d: New.
	* ld-nios2/u16.s: New.
	* ld-nios2/u16_symbol.s: New.
	* ld-elf/indirect.exp: Skip on targets that don't support
	-shared -fPIC.
	* ld-elfcomm/elfcomm.exp: Build with -G0 for nios2.
	* ld-plugin/lto.exp: Skip shared library tests on targets that
	don't support them.  Skip execution tests on non-native targets.

	binutils/
	* readelf.c: Include elf/nios2.h.
	(dump_relocations): Add case for EM_ALTERA_NIOS2.
	(get_nios2_dynamic_type): New.
	(get_dynamic_type): Add case for EM_ALTERA_NIOS2.
	(is_32bit_abs_reloc): Fix EM_ALTERA_NIOS2 case.
	(is_16bit_abs_reloc): Likewise.
	(is_none_reloc): Add EM_ALTERA_NIOS2 and EM_NIOS32 cases.
	* NEWS: Note Altera Nios II support.
	* MAINTAINERS: Add Nios II maintainers.
2013-02-06 23:22:26 +00:00
Alan Modra
a6dea726b0 * Makefile.am (ALL_64_EMULATION_SOURCES): Add eelf64rdos.c.
(eelf64rdos.c): New rule.
	* emulparams/elf64rdos.sh: New file.
	* configure.tgt (x86_64-*-rdos*): Use above.
	* Makefile.in: Regenerate.
2013-01-23 10:31:13 +00:00
Nick Clifton
a3c629886c * common.h: Fix case of "Meta".
* metag.h: New file.

	* dis-asm.h (print_insn_metag): New declaration.

	* metag.h: New file.

	* Makefile.am: Add Meta.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* configure.in: Add Meta.
	* disassemble.c: Add Meta support.
	* metag-dis.c: New file.

	* Makefile.am: Add Meta.
	* Makefile.in: Regenerate.
	* archures.c (bfd_mach_metag): New.
	* bfd-in2.h: Regenerate.
	* config.bfd: Add Meta.
	* configure: Regenerate.
	* configure.in: Add Meta.
	* cpu-metag.c: New file.
	* elf-bfd.h: Add Meta.
	* elf32-metag.c: New file.
	* elf32-metag.h: New file.
	* libbfd.h: Regenerate.
	* reloc.c: Add Meta relocations.
	* targets.c: Add Meta.

	* Makefile.am: Add Meta.
	* Makefile.in: Regenerate.
	* config/tc-metag.c: New file.
	* config/tc-metag.h: New file.
	* configure.tgt: Add Meta.
	* doc/Makefile.am: Add Meta.
	* doc/Makefile.in: Regenerate.
	* doc/all.texi: Add Meta.
	* doc/as.texiinfo: Document Meta options.
	* doc/c-metag.texi: New file.

	* gas/metag/labelarithmetic.d: New file.
	* gas/metag/labelarithmetic.s: New file.
	* gas/metag/metacore12.d: New file.
	* gas/metag/metacore12.s: New file.
	* gas/metag/metacore21-invalid.l: New file.
	* gas/metag/metacore21-invalid.s: New file.
	* gas/metag/metacore21.d: New file.
	* gas/metag/metacore21.s: New file.
	* gas/metag/metacore21ext.d: New file.
	* gas/metag/metacore21ext.s: New file.
	* gas/metag/metadsp21-invalid.l: New file.
	* gas/metag/metadsp21-invalid.s: New file.
	* gas/metag/metadsp21.d: New file.
	* gas/metag/metadsp21.s: New file.
	* gas/metag/metadsp21ext.d: New file.
	* gas/metag/metadsp21ext.s: New file.
	* gas/metag/metafpu21.d: New file.
	* gas/metag/metafpu21.s: New file.
	* gas/metag/metafpu21ext.d: New file.
	* gas/metag/metafpu21ext.s: New file.
	* gas/metag/metag.exp: New file.
	* gas/metag/tls.d: New file.
	* gas/metag/tls.s: New file.

	* Makefile.am: Add Meta.
	* Makefile.in: Regenerate.
	* configure.tgt: Add Meta.
	* emulparams/elf32metag.sh: New file.
	* emultempl/metagelf.em: New file.

	* ld-elf/merge.d: Mark Meta as xfail.
	* ld-gc/start.d: Skip this test on Meta.
	* ld-gc/personality.d: Skip this test on Meta.
	* ld-metag/external.s: New file.
	* ld-metag/metag.exp: New file.
	* ld-metag/pcrel.d: New file.
	* ld-metag/pcrel.s: New file.
	* ld-metag/shared.d: New file.
	* ld-metag/shared.r: New file.
	* ld-metag/shared.s: New file.
	* ld-metag/stub.d: New file.
	* ld-metag/stub.s: New file.
	* ld-metag/stub_pic_app.d: New file.
	* ld-metag/stub_pic_app.r: New file.
	* ld-metag/stub_pic_app.s: New file.
	* ld-metag/stub_pic_shared.d: New file.
	* ld-metag/stub_pic_shared.s: New file.
	* ld-metag/stub_shared.d: New file.
	* ld-metag/stub_shared.r: New file.
	* ld-metag/stub_shared.s: New file.

	* binutils/readelf.c: (guess_is_rela): Add EM_METAG.
	(dump_relocations): Add EM_METAG.
	(get_machine_name): Correct case for Meta.
	(is_32bit_abs_reloc): Add support for Meta ADDR32 reloc.
	(is_none_reloc): Add support for Meta NONE reloc.
2013-01-10 09:49:22 +00:00
Nick Clifton
e407c74b5b * archures.c: Add support for MIPS r5900
* bfd-in2.h: Add support for MIPS r5900
	* config.bfd: Add support for Sony Playstation 2
	* cpu-mips.c: Add support for MIPS r5900
	* elfxx-mips.c: Add support for MIPS r5900 (extension of r4000)

	* config/tc-mips.c: Add support for MIPS r5900
	Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq.
	* config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot.
	* config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900.
	* config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
	* config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900.
	* configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu).

	* config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900.

	* elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software.
	* opcode/mips.h: Add support for r5900 instructions including lq and sq.

	* configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk).
	* emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32.
	* emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32.
	* Makefile.am: Add linker scripts for Sony Playstation 2 ELF files.

	* opcodes/mips-dis.c: Add names for CP0 registers of r5900.
	* opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq.

	* opcodes/mips-opc.c: Add support for MIPS r5900 CPU.
	Add support for 128 bit MMI (Multimedia Instructions).
	Add support for EE instructions (Emotion Engine).
	Disable unsupported floating point instructions (64 bit and undefined compare operations).
	Enable instructions of MIPS ISA IV which are supported by r5900.
	Disable 64 bit co processor instructions.
	Disable 64 bit multiplication and division instructions.
	Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)).
	Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900.
	Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
2013-01-04 17:22:53 +00:00
Alan Modra
79056107ed Add x86_64-*-rdos. 2012-12-05 05:48:19 +00:00
Joern Rennecke
f204ddb8a8 * scripttempl/epiphany_4x4.sc, emulparams/elf32epiphany_4x4.sh: Add.
* emultempl/epiphanyelf_4x4.em: Likewise.
        * configure.tgt: Add elf32epiphany_4x4 support.
        * Makefile.am: Likewise.
        * Makefile.in: Regenerate.
2012-11-30 18:28:38 +00:00
Nick Clifton
de863c7475 2012-11-09 Nick Clifton <nickc@redhat.com>
* Makefile.am (ALL_MACHINES): Add cpu-v850-rh850.lo.
	(ALL_MACHINES_CFILES): Add cpu-v850-rh850.c.
	* archures.c (bfd_arch_info): Add bfd_v850_rh850_arch.
	* config.bfd: Likewise.
	* configure.in: Add bfd_elf32_v850_rh850_vec.
	* cpu-v850.c: Update printed description.
	* cpu-v850_rh850.c: New file.
	* elf32-v850.c (v850_elf_check_relocs): Add support for RH850 ABI
	relocs.
	(v850_elf_perform_relocation): Likewise.
	(v850_elf_final_link_relocate): Likewise.
	(v850_elf_relocate_section): Likewise.
	(v850_elf_relax_section): Likewise.
	(v800_elf_howto_table): New.
	(v850_elf_object_p): Add support for RH850 ABI values.
	(v850_elf_final_write_processing): Likewise.
	(v850_elf_merge_private_bfd_data): Likewise.
	(v850_elf_print_private_bfd_data): Likewise.
	(v800_elf_reloc_map): New.
	(v800_elf_reloc_type_lookup): New.
	(v800_elf_reloc_name_lookup): New.
	(v800_elf_info_to_howto): New.
	(bfd_elf32_v850_rh850_vec): New.
	(bfd_arch_v850_rh850): New.
	* targets.c (_bfd_targets): Add bfd_elf32_v850_rh850_vec.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.

	* readelf.c (get_machine_flags): Add support for E_FLAG_RX_ABI.
	(guess_is_rela): Add EM_V800.
	(dump_relocations): Likewise.
	(get_machine_name): Update EM_V800.
	(get_machine_flags): Add support for RH850 ABI flags.
	(is_32bit_abs_reloc): Add support for RH850 ABI reloc.

	* config/tc-v850.c (v850_target_arch): New.
	(v850_target_format): New.
	(set_machine): Use v850_target_arch.
	(md_begin): Likewise.
	(md_show_usage): Document new switches.
	(md_parse_option): Add -mgcc-abi, -mrh850-abi, -m8byte-align and
	-m4byte-align.
	* config/tc-v850.c (TARGET_ARCH) Use v850_target_arch.
	(TARGET_FORMAT): Use v850_target_format.
	* doc/c-v850.texi: Document new options.

	* v850.h: Add RH850 ABI values.

	* Makefile.am: (ALL_EMULATION_SOURCES): Add ev850_rh850.c.
	* Makefile.in: Regenerate.
	* configure.tgt (v850*-*-*): Make v850_rh850 the default
	emulation. Add vanilla v850 as an extra emulation.
	* emulparams/v850_rh850.sh: New file.
	* scripttempl/v850_rh850.sc: New file.

	* configure.in: Add bfd_v850_rh850_arch.
	* configure: Regenerate.
	* disassemble.c (disassembler): Likewise.
2012-11-09 17:36:19 +00:00
Michael Eager
f23200ada9 Add microblazeel target support to bfd, gas and ld.
binutils/bfd/Changelog

 2012-11-09  Edgar E. Iglesias <edgar.iglesias@gmail.com>

          * config.bfd: Add microblazeel-*-*
          * configure.in: Likewise.
          * configure: Regenerate.
          * elf32-microblaze.c (microblaze_elf_relocate_section):
            Add endian awareness.
            (microblaze_elf_merge_private_bfd_data): New.
            (microblaze_bfd_write_imm_value_32): New.
            (microblaze_bfd_write_imm_value_64): New.
            (microblaze_elf_relax_section): Add endian awareness.
            (microblaze_elf_add_symbol_hook): Define TARGET_LITTLE_NAME,
            TARGET_LITTLE_SYM and bfd_elf32_bfd_merge_private_bfd_data.
          * targets.c: Add bfd target bfd_elf32_microblazeel_vec.

binutils/gas/Changelog

 2012-11-09  Edgar E. Iglesias <edgar.iglesias@gmail.com>

          * tc-microblaze.c (md_longopts): Define OPTION_EB and
            OPTION_EL for target.
            (md_parse_option): Likewise.
          * tc-microblaze.h: Set elf32-microblazeel if not
            target_big_endian for TARGET_FORMAT.
          * configure.tgt: Add microblazeel and set endian per target.

binutils/gas/testsuite/Changelog

 2012-11-09  David Holsgrove  <david.holsgrove@xilinx.com>

          * gas/microblaze/endian.exp: New file - endian
            testcase for microblaze / microblazeel.
          * gas/microblaze/endian.s: Likewise.
          * gas/microblaze/endian_be.d: Likewise.
          * gas/microblaze/endian_le.d: Likewise.
          * gas/microblaze/endian_le_elf.d: Likewise.
          * gas/microblaze/reloc_sym.d: Update to accept targets
            other than elf32-microblaze.
          * gas/microblaze/special_reg.d: Likewise.

binutils/ld/Changelog

 2012-11-09  Edgar E. Iglesias <edgar.iglesias@gmail.com>

          * Makefile.am: Add eelf32microblazeel.c and eelf32mbel_linux.c.
          * Makefile.in: Regenerated.
          * configure.tgt: Add microblazeel and set endian per target.
          * emulparams/elf32mb_linux.sh: Add OUTPUT_FORMAT.
          * emulparams/elf32microblaze.sh: Likewise.
          * emulparams/elf32mbel_linux.sh: New file.
          * emulparams/elf32microblazeel.sh: Likewise.
2012-11-09 16:25:12 +00:00
Alan Modra
ce23608fa2 binutils/
* dlltool.c (INIT_SEC_DATA): Move.
	(secdata <DLLTOOL_PPC>): Use here too.
binutils/testsuite/
	* binutils-all/copy-3.d: Exclude all cygwin and mingw targets,
	and rs6000.
gas/
	* config/tc-ppc.c (ppc_znop): Remove unused vars.
ld/
	* configure.tgt (powerpcle-pe,winnt,cygwin): Add deffilep.o
	and pe-dll.o.
2012-10-29 10:09:34 +00:00
Steve Ellcey
c76b75fd82 2012-09-19 Steve Ellcey <sellcey@mips.com>
* configure.tgt: Add mips*-mti-elf* target.
2012-09-19 20:14:26 +00:00
Alan Modra
ffda88b480 * configure.tgt (powerpc-*-elf, et al): Define targ_extra_libpath.
Correct whitespace.
	(powerpcle-*-elf, et al): Likewise.  Correct targ_extra_emuls.
2012-09-10 14:35:07 +00:00
Iain Sandoe
c008817b74 * configure.tgt (powerpc-*-elf, et al): Define targ64_extra_emuls
and targ64_extra_libpath.
        (powerpcle-*-elf, et al): Likewise.
2012-09-10 09:59:07 +00:00
Nick Clifton
a06ea96464 Add support for 64-bit ARM architecture: AArch64 2012-08-13 14:52:54 +00:00
H.J. Lu
9e48fe0e38 Replace -linux-gnux32 with -linux-gnu 2012-06-24 21:47:45 +00:00
H.J. Lu
0c77920e10 Enable elf_k1om for x86_64-*-linux-gnux32
* configure.tgt: Enable elf_k1om for x86_64-*-linux-gnux32.
	Remove x32 in tdir_i386linux and tdir_elf_i386.
2012-06-24 18:52:17 +00:00
H.J. Lu
3c99554527 Support x86_64-*-linux-gnux32
gas/

	* configure.tgt: Support x86_64-*-linux-gnux32.

ld/

	* configure.tgt: Support x86_64-*-linux-gnux32.

ld/testsuite/

	* ld-elf/eh1.d: Skip x86_64-*-linux-gnux32.
	* ld-elf/eh2.d: Likewise.
	* ld-elf/eh3.d: Likewise.
	* ld-elf/eh4.d: Likewise.

	* ld-elfvsb/elfvsb.exp: Xfail x86_64-*-linux-gnux32.
	* ld-shared/shared.exp: Likewise.

	* ld-ifunc/ifunc-3a-x86.d: Support x86_64-*-linux-gnux32.
2012-05-04 20:01:03 +00:00
Nick Clifton
f6c1a2d592 Add support for Motorola XGATE embedded CPU 2012-05-03 13:12:08 +00:00
Nick Clifton
b38cadfb70 * elf32-arm.c (elf32_arm_nacl_plt0_entry, elf32_arm_nacl_plt_entry):
New variables.
	(struct elf32_arm_link_hash_table): New member `nacl_p'.
	(elf32_arm_link_hash_table_create): Initialize it.
	(elf32_arm_nacl_link_hash_table_create): New function.
	(arm_movw_immediate, arm_movt_immediate): New functions.
	(elf32_arm_populate_plt_entry): Test HTAB->nacl_p.
	(elf32_arm_finish_dynamic_sections): Likewise.
	(elf32_arm_output_plt_map_1): Likewise.
	(bfd_elf32_littlearm_nacl_vec, bfd_elf32_bigarm_nacl_vec):
	New backend vector stanza.
	(elf32_arm_nacl_modify_segment_map): New function.
	* config.bfd: Handle arm-*-nacl*, armeb-*-nacl*.
	* targets.c: Support bfd_elf32_{big,little}_nacl_vec.
	* configure.in: Likewise.
	(bfd_elf32_bigarm_nacl_vec): Add elf-nacl.lo here.
	(bfd_elf32_littlearm_nacl_vec): Likewise.
	(bfd_elf32_bigarm_vec, bfd_elf32_littlearm_vec): Likewise.
	(bfd_elf32_bigarm_symbian_vec): Likewise.
	(bfd_elf32_littlearm_symbian_vec): Likewise.
	(bfd_elf32_bigarm_vxworks_vec): Likewise.
	(bfd_elf32_littlearm_vxworks_vec): Likewise.
	* configure: Regenerated.

	* configure.tgt (arm-*-nacl*): Match it.
	* config/te-nacl.h (FPU_DEFAULT, EABI_DEFAULT): Define.
	(LOCAL_LABELS_DOLLAR): Define.
	* config/tc-arm.c (elf32_arm_target_format) [TE_NACL]:
	Use nacl format variants.

	* gas/elf/elf.exp (run_elf_list_test): Treat arm-*-nacl* targets
	as -armeabi.

	* gas/arm/any-idiv.d: Match *-*-nacl* targets too.
	* gas/arm/arch4t.d: Likewise.
	* gas/arm/arch4t-eabi.d: Likewise.
	* gas/arm/attr-any-armv4t.d: Likewise.
	* gas/arm/attr-any-thumbv6.d: Likewise.
	* gas/arm/attr-cpu-directive.d: Likewise.
	* gas/arm/attr-default.d: Likewise.
	* gas/arm/attr-march-all.d: Likewise.
	* gas/arm/attr-march-armv1.d: Likewise.
	* gas/arm/attr-march-armv2a.d: Likewise.
	* gas/arm/attr-march-armv2.d: Likewise.
	* gas/arm/attr-march-armv2s.d: Likewise.
	* gas/arm/attr-march-armv3.d: Likewise.
	* gas/arm/attr-march-armv3m.d: Likewise.
	* gas/arm/attr-march-armv4.d: Likewise.
	* gas/arm/attr-march-armv4t.d: Likewise.
	* gas/arm/attr-march-armv4txm.d: Likewise.
	* gas/arm/attr-march-armv4xm.d: Likewise.
	* gas/arm/attr-march-armv5.d: Likewise.
	* gas/arm/attr-march-armv5t.d: Likewise.
	* gas/arm/attr-march-armv5te.d: Likewise.
	* gas/arm/attr-march-armv5tej.d: Likewise.
	* gas/arm/attr-march-armv5texp.d: Likewise.
	* gas/arm/attr-march-armv5txm.d: Likewise.
	* gas/arm/attr-march-armv6.d: Likewise.
	* gas/arm/attr-march-armv6j.d: Likewise.
	* gas/arm/attr-march-armv6k.d: Likewise.
	* gas/arm/attr-march-armv6k+sec.d: Likewise.
	* gas/arm/attr-march-armv6kt2.d: Likewise.
	* gas/arm/attr-march-armv6-m.d: Likewise.
	* gas/arm/attr-march-armv6-m+os.d: Likewise.
	* gas/arm/attr-march-armv6s-m.d: Likewise.
	* gas/arm/attr-march-armv6t2.d: Likewise.
	* gas/arm/attr-march-armv6z.d: Likewise.
	* gas/arm/attr-march-armv6zk.d: Likewise.
	* gas/arm/attr-march-armv6zkt2.d: Likewise.
	* gas/arm/attr-march-armv6zt2.d: Likewise.
	* gas/arm/attr-march-armv7-a.d: Likewise.
	* gas/arm/attr-march-armv7a.d: Likewise.
	* gas/arm/attr-march-armv7-a+idiv.d: Likewise.
	* gas/arm/attr-march-armv7-a+mp.d: Likewise.
	* gas/arm/attr-march-armv7-a+sec.d: Likewise.
	* gas/arm/attr-march-armv7-a+sec+virt.d: Likewise.
	* gas/arm/attr-march-armv7-a+virt.d: Likewise.
	* gas/arm/attr-march-armv7.d: Likewise.
	* gas/arm/attr-march-armv7em.d: Likewise.
	* gas/arm/attr-march-armv7-m.d: Likewise.
	* gas/arm/attr-march-armv7m.d: Likewise.
	* gas/arm/attr-march-armv7-r.d: Likewise.
	* gas/arm/attr-march-armv7r.d: Likewise.
	* gas/arm/attr-march-armv7-r+mp.d: Likewise.
	* gas/arm/attr-march-iwmmxt2.d: Likewise.
	* gas/arm/attr-march-iwmmxt.d: Likewise.
	* gas/arm/attr-march-xscale.d: Likewise.
	* gas/arm/attr-mcpu.d: Likewise.
	* gas/arm/attr-mfpu-arm1020e.d: Likewise.
	* gas/arm/attr-mfpu-arm1020t.d: Likewise.
	* gas/arm/attr-mfpu-arm1136jf-s.d: Likewise.
	* gas/arm/attr-mfpu-arm1136jfs.d: Likewise.
	* gas/arm/attr-mfpu-arm7500fe.d: Likewise.
	* gas/arm/attr-mfpu-fpa10.d: Likewise.
	* gas/arm/attr-mfpu-fpa11.d: Likewise.
	* gas/arm/attr-mfpu-fpa.d: Likewise.
	* gas/arm/attr-mfpu-fpe2.d: Likewise.
	* gas/arm/attr-mfpu-fpe3.d: Likewise.
	* gas/arm/attr-mfpu-fpe.d: Likewise.
	* gas/arm/attr-mfpu-maverick.d: Likewise.
	* gas/arm/attr-mfpu-neon.d: Likewise.
	* gas/arm/attr-mfpu-neon-fp16.d: Likewise.
	* gas/arm/attr-mfpu-softfpa.d: Likewise.
	* gas/arm/attr-mfpu-softvfp.d: Likewise.
	* gas/arm/attr-mfpu-softvfp+vfp.d: Likewise.
	* gas/arm/attr-mfpu-vfp10.d: Likewise.
	* gas/arm/attr-mfpu-vfp10-r0.d: Likewise.
	* gas/arm/attr-mfpu-vfp3.d: Likewise.
	* gas/arm/attr-mfpu-vfp9.d: Likewise.
	* gas/arm/attr-mfpu-vfp.d: Likewise.
	* gas/arm/attr-mfpu-vfpv2.d: Likewise.
	* gas/arm/attr-mfpu-vfpv3-d16.d: Likewise.
	* gas/arm/attr-mfpu-vfpv3.d: Likewise.
	* gas/arm/attr-mfpu-vfpv4-d16.d: Likewise.
	* gas/arm/attr-mfpu-vfpv4.d: Likewise.
	* gas/arm/attr-mfpu-vfpxd.d: Likewise.
	* gas/arm/attr-names.d: Likewise.
	* gas/arm/attr-order.d: Likewise.
	* gas/arm/attr-override-cpu-directive.d: Likewise.
	* gas/arm/attr-override-mcpu.d: Likewise.
	* gas/arm/got_prel.d: Likewise.
	* gas/arm/mapdir.d: Likewise.
	* gas/arm/mapmisc.d: Likewise.
	* gas/arm/mapsecs.d: Likewise.
	* gas/arm/mapshort-eabi.d: Likewise.
	* gas/arm/mapshort-elf.d: Likewise.
	* gas/arm/mov-highregs-any.d: Likewise.
	* gas/arm/mov-lowregs-any.d: Likewise.
	* gas/arm/pr12198-1.d: Likewise.
	* gas/arm/pr12198-2.d: Likewise.
	* gas/arm/thumb.d: Likewise.
	* gas/arm/thumb-eabi.d: Likewise.
	* gas/arm/thumbrel.d: Likewise.

	* configure.tgt (arm*-*-nacl*, arm*b-*-nacl*): Handle them.
	* emulparams/armelf_nacl.sh: New file.
	* emulparams/armelfb_nacl.sh: New file.
	* Makefile.am (ALL_EMULATION_SOURCES): Add earmelf_nacl.c
	and earmelfb_nacl.c here.
	(earmelf_nacl.c, earmelfb_nacl.c): New targets.
	* Makefile.in: Regenerated.

	* ld-arm/arm-elf.exp (armelftests): Split out into ...
	(armelftests_common, armelftests_nonacl): ... these two.
	(armeabitests): Split out into ...
	(armeabitests_common, armeabitests_nonacl): ... these two.
	Omit _nonacl sets for arm*-*-nacl* targets.

	* ld-arm/farcall-mix.d: Don't match exact addresses, only symbolic ones.
	* ld-arm/farcall-mix2.d: Likewise.
	* ld-arm/farcall-group.d: Likewise.

	* ld-arm/tls-gdesc-got.d: Match variant file formats too.
	Accept some variation in exact addresses.

	* ld-arm/thumb2-b-interwork.d: Match variant file formats too.
	Fix regexps not to care about exact addresses where not relevant.

	* ld-arm/thumb2-bl-undefweak.d: Match any hex strings, not any
	strings of particular exact lengths.
	* ld-arm/thumb2-bl-undefweak1.d: Likewise.

	* ld-arm/arm-app.r: Match variant file formats too.
	* ld-arm/arm-app-abs32.r: Likewise.
	* ld-arm/arm-lib.d: Likewise.
	* ld-arm/arm-lib.r: Likewise.
	* ld-arm/arm-static-app.r: Likewise.
	* ld-arm/armv4-bx.d: Likewise.
	* ld-arm/data-only-map.d: Likewise.
	* ld-arm/group-relocs.d: Likewise.
	* ld-arm/jump19.d: Likewise.
	* ld-arm/reloc-boundaries.d: Likewise.
	* ld-arm/thumb1-bl.d: Likewise.
	* ld-arm/thumb2-bl.d: Likewise.
	* ld-arm/tls-app.d: Likewise.
	* ld-arm/tls-app.r: Likewise.
	* ld-arm/tls-gdierelax.d: Likewise.
	* ld-arm/tls-gdierelax2.d: Likewise.
	* ld-arm/tls-gdlerelax.d: Likewise.
	* ld-arm/tls-lib.d: Likewise.
	* ld-arm/tls-lib.r: Likewise.
	* ld-arm/tls-mixed.r: Likewise.
	* ld-arm/vfp11-fix-none.d: Likewise.
	* ld-arm/vfp11-fix-scalar.d: Likewise.
	* ld-arm/vfp11-fix-vector.d: Likewise.
	* ld-arm/arm-static-app.d: Likewise.
	Fix regexps not to care about exact number of leading spaces.
	* ld-arm/arm-app-abs32.d: Likewise.
	* ld-arm/fix-arm1176-off.d: Likewise.
	* ld-arm/fix-arm1176-on.d: Likewise.

	* ld-arm/arm-elf.exp: Treat nacl targets like eabi targets.
2012-04-12 13:01:15 +00:00
Nick Clifton
202e23565d * configure.ac (ia64*-*-*vms*): Add support for ld.
* configure: Regenerate.

	* scripttempl/ia64vms.sc: New file.
	* emultempl/vms.em (_before_parse): Support for ia64.
	(elf64-ia64-vms): New fragment for ia64.
	* emulparams/elf64_ia64_vms.sh: New file.
	* configure.tgt (ia64-*-*vms*): Add.
	* Makefile.am (ALL_64_EMULATION_SOURCES): Add eelf64_ia64_vms.c
	(eelf64_ia64_vms.c): New rule.
	* Makefile.in: Regenerate.

	* elflink.c (elf_link_output_extsym): Add a guard.
	(bfd_elf_final_link): Remove assertion.
	(bfd_elf_final_link): Add a guard.
	* elfnn-ia64.c (INCLUDE_IA64_VMS): Removed.
	(elfNN_vms_section_from_shdr, elfNN_vms_object_p)
	(elfNN_vms_post_process_headers, elfNN_vms_section_processing)
	(elfNN_vms_final_write_processing, elfNN_vms_close_and_cleanup):
	Remove.
	(elfNN-ia64-vms target): Move to ...
	* elf64-ia64-vms.c: New file.
	* configure.in (bfd_elf64_ia64_vms_vec): Add elf64-ia64-vms.lo
	* Makefile.am (BFD64_BACKENDS): Add elf64-ia64-vms.lo.
	(BFD64_BACKENDS_CFILES): Ad elf64-ia64-vms.c.
	* configure: Regenerate.
	* Makefile.in: Regenerate.
2012-04-12 07:35:07 +00:00
Roland McGrath
5a68afcf73 bfd/
2012-04-03  Roland McGrath  <mcgrathr@google.com>

	* elf-nacl.c: New file.
	* elf-nacl.h: New file.
	* elf32-i386.c (elf_backend_modify_segment_map): Define for
	bfd_elf32_i386_nacl_vec.
	(elf_backend_modify_program_headers): Likewise.
	* elf64-x86-64.c (elf_backend_modify_segment_map): Define for
	bfd_elf64_x86_64_nacl_vec and bfd_elf32_x86_64_nacl_vec.
	(elf_backend_modify_program_headers): Likewise.
	* Makefile.am (BFD32_BACKENDS, BFD64_BACKENDS): Add elf-nacl.lo here.
	(BFD32_BACKENDS_CFILES, BFD64_BACKENDS_CFILES): Add elf-nacl.c here.
	* Makefile.in: Regenerated.
	* configure.in (bfd_elf64_x86_64_nacl_vec): Add elf-nacl.o to tb here.
	(bfd_elf32_x86_64_nacl_vec): Likewise.
	(bfd_elf64_x86_64_vec, bfd_elf32_x86_64_vec): Likewise.
	(bfd_elf64_x86_64_freebsd_vec, bfd_elf64_x86_64_sol2_vec): Likewise.
	(bfd_elf64_l1om_vec, bfd_elf64_l1om_freebsd_vec): Likewise.
	(bfd_elf64_k1om_vec, bfd_elf64_k1om_freebsd_vec): Likewise.
	(bfd_elf32_i386_nacl_vec): Likewise.
	(bfd_elf32_i386_sol2_vec, bfd_elf32_i386_freebsd_vec): Likewise.
	(bfd_elf32_i386_vxworks_vec, bfd_elf32_i386_vec): Likewise.
	* configure: Regenerated.

binutils/testsuite/
2012-04-03  Roland McGrath  <mcgrathr@google.com>

	* lib/binutils-common.exp (is_elf_format): Consider *-*-nacl* to
	be ELF too.

	* binutils-all/elfedit-4.d: Add "#as: --64" option.

	* binutils-all/i386/i386.exp: Accept nacl targets too.
	* binutils-all/x86-64/x86-64.exp: Likewise.

gas/testsuite/
2012-04-03  Roland McGrath  <mcgrathr@google.com>

	* gas/i386/k1om.d: Add not-target match for *-*-nacl*.
	* gas/i386/l1om.d: Likewise.

ld/
2012-04-03  Roland McGrath  <mcgrathr@google.com>

	* configure.tgt (i[3-7]86-*-nacl*, x86_64-*-nacl*): Handle them.
	* emulparams/elf_nacl.sh: New file.
	* emulparams/elf_i386_nacl.sh: New file.
	* emulparams/elf32_x86_64_nacl.sh: New file.
	* emulparams/elf_x86_64_nacl.sh: New file.
	* Makefile.am (ALL_EMULATION_SOURCES): Add eelf_i386_nacl.c here.
	(ALL_64_EMULATION_SOURCES): Add eelf32_x86_64_nacl.c and
	eelf_x86_64_nacl.c here.
	(eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c):
	New targets.
	* Makefile.in: Regenerated.

	* scripttempl/elf.sc: Handle SEPARATE_CODE cases.

ld/testsuite/
2012-04-03  Roland McGrath  <mcgrathr@google.com>

	* ld-x86-64/ilp32-4-nacl.d: New file.
	* ld-x86-64/x86-64.exp: Run it.

	* ld-discard/discard.exp: Accept nacl targets too.
	* ld-elf/binutils.exp: Likewise.
	* ld-elf/comm-data.exp: Likewise.
	* ld-elf/elf.exp: Likewise.
	* ld-elf/tls_common.exp: Likewise.
	* ld-elfvers/vers.exp: Likewise.
	* ld-elfvsb/elfvsb.exp: Likewise.
	* ld-elfweak/elfweak.exp: Likewise.
	* ld-gc/gc.exp: Likewise.
	* ld-ifunc/binutils.exp: Likewise.
	* ld-ifunc/ifunc.exp: Likewise.
	* ld-linkonce/linkonce.exp:Likewise.
	* ld-pie/pie.exp: Likewise.
	* ld-shared/shared.exp: Likewise.
	* ld-undefined/weak-undef.exp: Likewise.
	* ld-unique/unique.exp: Likewise.
	* ld-x86-64/dwarfreloc.exp: Likewise.
	* ld-x86-64/line.exp: Likewise.

	* lib/ld-lib.exp (slurp_options): Support global array
	options_regsub to apply substitutions to the contents
	of options lines read from the file.
	* ld-i386/emit-relocs.d: Renamed to ...
	* ld-i386/emit-relocs.rd: ... this.
	* ld-i386/i386.exp: Accept nacl targets too.
	For them, use options_regsub to replace elf_i386 with
	elf_i386_nacl in run_dump_test cases; apply the same
	substitution in $i386tests; replace foo.rd expectations
	files with foo-nacl.rd in $i386tests.
	(i386tests): Change emit-relocs.d to emit-relocs.rd here.
	* ld-i386/emit-relocs-nacl.rd: New file.
	* ld-i386/plt-nacl.pd: New file.
	* ld-i386/plt-pic-nacl.pd: New file.
	* ld-i386/tlsbin-nacl.rd: New file.
	* ld-i386/tlsbindesc-nacl.rd: New file.
	* ld-i386/tlsdesc-nacl.rd: New file.
	* ld-i386/tlsgdesc-nacl.rd: New file.
	* ld-i386/tlsnopic-nacl.rd: New file.
	* ld-i386/tlspic-nacl.rd: New file.
	* ld-x86-64/x86-64.exp: Accept nacl targets too.
	For them, use options_regsub to replace elf_x86_64 with
	elf_x86_64_nacl in run_dump_test cases; apply the same
	substitution in $x86_64tests; replace foo.rd expectations
	files with foo-nacl.rd in $x86_64tests.
	Add explicit -melf_x86_64 to ld options in tests that need it,
	in case the default emulation is x32 (as it is for x86_64-nacl).
	* ld/testsuite/ld-x86-64/plt-nacl.pd: New file.
	* ld/testsuite/ld-x86-64/split-by-file-nacl.rd: New file.
	* ld/testsuite/ld-x86-64/tlsbin-nacl.rd: New file.
	* ld/testsuite/ld-x86-64/tlsbindesc-nacl.rd: New file.
	* ld/testsuite/ld-x86-64/tlsdesc-nacl.pd: New file.
	* ld/testsuite/ld-x86-64/tlsdesc-nacl.rd: New file.
	* ld/testsuite/ld-x86-64/tlsgdesc-nacl.rd: New file.
	* ld/testsuite/ld-x86-64/tlspic-nacl.rd: New file.

	* ld-i386/hidden2.d: Loosen regexps to match any file format variant,
	and not to depend on exact addresses, displacements, etc. where
	they are irrelevant.
	* ld-i386/pcrel16.d: Likewise.
	* ld-i386/pcrel16abs.d: Likewise.
	* ld-i386/pr12718.d: Likewise.
	* ld-i386/pr12921.d: Likewise.
	* ld-i386/reloc.d: Likewise.
	* ld-i386/tlsbin.dd: Likewise.
	* ld-i386/tlsbin.sd: Likewise.
	* ld-i386/tlsbin.td: Likewise.
	* ld-i386/tlsbindesc.dd: Likewise.
	* ld-i386/tlsbindesc.sd: Likewise.
	* ld-i386/tlsbindesc.td: Likewise.
	* ld-i386/tlsdesc.dd: Likewise.
	* ld-i386/tlsdesc.sd: Likewise.
	* ld-i386/tlsdesc.td: Likewise.
	* ld-i386/tlsg.sd: Likewise.
	* ld-i386/tlsgdesc.dd: Likewise.
	* ld-i386/tlsindntpoff.dd: Likewise.
	* ld-i386/tlsnopic.dd: Likewise.
	* ld-i386/tlsnopic.sd: Likewise.
	* ld-i386/tlspic.dd: Likewise.
	* ld-i386/tlspic.sd: Likewise.
	* ld-i386/tlspic.td: Likewise.
	* ld-i386/tlspie2.d: Likewise.
	* ld-x86-64/hidden2.d: Likewise.
	* ld-x86-64/pcrel16.d: Likewise.
	* ld-x86-64/pr12718.d: Likewise.
	* ld-x86-64/pr12921.d: Likewise.
	* ld-x86-64/protected3.d: Likewise.
	* ld-x86-64/tlsbin.dd: Likewise.
	* ld-x86-64/tlsbin.sd: Likewise.
	* ld-x86-64/tlsbin.td: Likewise.
	* ld-x86-64/tlsbindesc.dd: Likewise.
	* ld-x86-64/tlsbindesc.sd: Likewise.
	* ld-x86-64/tlsbindesc.td: Likewise.
	* ld-x86-64/tlsdesc.dd: Likewise.
	* ld-x86-64/tlsdesc.sd: Likewise.
	* ld-x86-64/tlsdesc.td: Likewise.
	* ld-x86-64/tlsg.sd: Likewise.
	* ld-x86-64/tlsgd5.dd: Likewise.
	* ld-x86-64/tlsgd6.dd: Likewise.
	* ld-x86-64/tlsgdesc.dd: Likewise.
	* ld-x86-64/tlspic.dd: Likewise.
	* ld-x86-64/tlspic.sd: Likewise.
	* ld-x86-64/tlspic.td: Likewise.

	* ld-x86-64/ilp32-8.d: Match any file format variant.
	Use a -Ttext and adjust expected results, to handle variant layouts.
	* ld-x86-64/ilp32-9.d: Likewise.

	* ld-i386/alloc.t: Remove superfluous OUTPUT_FORMAT statement.
	* ld-i386/pr12627.t: Likewise.

	* ld-x86-64/abs-l1om.d: Add target: constraint.
	* ld-x86-64/protected2-l1om.d: Likewise.
	* ld-x86-64/protected3-l1om.d: Likewise.
	* ld-x86-64/ilp32-4.d: Likewise.

	* ld-x86-64/plt.s: New file.
	* ld-x86-64/pltlib.s: New file.
	* ld-x86-64/plt.pd: New file.
	* ld-x86-64/x86-64.exp (x86_64tests): Add them.

	* ld-i386/plt.s: New file.
	* ld-i386/pltlib.s: New file.
	* ld-i386/plt.pd: New file.
	* ld-i386/plt-pic.s: New file.
	* ld-i386/plt-pic.pd: New file.
	* ld-i386/i386.exp (i386tests): Add them.
2012-04-03 16:01:38 +00:00
Hans-Peter Nilsson
cae4ddc69f * configure.tgt (mips64*el-*-freebsd*, mips64*-*-freebsd*)
(mips*el-*-freebsd*, mips*-*-freebsd*): Correct triplets by
	replacing trailing "-*" with "*".
2012-03-05 04:02:20 +00:00
Walter Lee
fb6ceddedd Add big-endian support for tilegx.
bfd/
	* config.bfd (tilegx-*-*): rename little endian vector; add big
	endian vector.
	(tilegxbe-*-*): New case.
	* configure.in (bfd_elf32_tilegx_vec): Rename...
	(bfd_elf32_tilegx_le_vec): ... to this.
	(bfd_elf32_tilegx_be_vec): New vector.
	(bfd_elf64_tilegx_vec): Rename...
	(bfd_elf64_tilegx_le_vec): ... to this.
	(bfd_elf64_tilegx_be_vec): New vector.
	* configure: Regenerate.
	* elf32-tilegx.c (TARGET_LITTLE_SYM): Rename.
	(TARGET_LITTLE_NAME): Ditto.
	(TARGET_BIG_SYM): Define.
	(TARGET_BIG_NAME): Define.
	* elf64-tilegx.c (TARGET_LITTLE_SYM): Rename.
	(TARGET_LITTLE_NAME): Ditto.
	(TARGET_BIG_SYM): Define.
	(TARGET_BIG_NAME): Define.
	* targets.c (bfd_elf32_tilegx_vec): Rename...
	(bfd_elf32_tilegx_le_vec): ... to this.
	(bfd_elf32_tilegx_be_vec): Declare.
	(bfd_elf64_tilegx_vec): Rename...
	(bfd_elf64_tilegx_le_vec): ... to this.
	(bfd_elf64_tilegx_be_vec): Declare.
	(_bfd_target_vector): Add / rename above vectors.

binutils/testsuite/
	* binutils-all/objdump.exp (cpus_expected): Add tilegx.

gas/
	* tc-tilegx.c (tilegx_target_format): Handle big endian.
	(OPTION_EB): Define.
	(OPTION_EL): Define.
	(md_longopts): Add entries for "EB" and "EL".
	(md_parse_option): Handle OPTION_EB and OPTION_EL.
	(md_show_usage): Add -EB and -EL.
	(md_number_to_chars): New.
	* tc-tilegx.h (TARGET_BYTES_BIG_ENDIAN): Guard definition with
	ifndef.
	(md_number_to_chars): Delete.
	* configure.tgt (tilegx*be): Handle.
	* doc/as.texinfo [TILE-Gx]: Document -EB and -EL.
	* doc/c-tilegx.texi: Ditto.

ld/
	* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32tilegx_be.c.
	(ALL_64_EMULATION_SOURCES): Add eelf64tilegx_be.c.
	(eelf32tilegx_be.c): Add rule to build this file.
	(eelf64tilegx_be.c): Ditto.
	* Makefile.in: Regenerate.
	* configure.tgt (tilegx-*-*): Support big endian.
	(tilegxbe-*-*): New.
	* emulparams/elf32tilegx.sh (OUTPUT_FORMAT): Rename.
	(BIG_OUTPUT_FORMAT): Define.
	(LITTLE_OUTPUT_FORMAT): Define.
	* emulparams/elf32tilegx_be.sh: New.
	* emulparams/elf64tilegx.sh (OUTPUT_FORMAT): Rename.
	(BIG_OUTPUT_FORMAT): Define.
	(LITTLE_OUTPUT_FORMAT): Define.
	* emulparams/elf64tilegx_be.sh: New.

ld/testsuite/
	* ld-tilegx/reloc-be.d: New.
	* ld-tilegx/reloc-le.d: New.
	* ld-tilegx/reloc.d: Delete.
	* ld-tilegx/tilegx.exp: Test big and little endian.
2012-02-25 19:51:34 +00:00
Alan Modra
bd59d91639 * Makefile.am (ALL_64_EMULATION_SOURCES): Add powerpc64-*-freebsd
source.
	(eelf64ppc_fbsd.c): Add rules to build this file.
	* Makefile.in: Regenerate.
	* configure.tgt: Add target definition for powerpc64-*-freebsd*.
	Adjust powerpc-*-freebsd*.
	* emultempl/ppc64elf.em: Add a mechanism to override the default
	value of 0 for plt_static_chain.
	* emulparams/elf32ppc_fbsd.sh (OUTPUT_FORMAT): Override the default.
	* emulparams/elf64ppc_fbsd.sh (OUTPUT_FORMAT): Likewise.
	(DEFAULT_PLT_STATIC_CHAIN): Define to 1.
2011-11-21 13:22:46 +00:00
Rainer Orth
e0d08d4b30 ld:
* configure.tgt (x86_64-*-solaris2*): Use $targ_extra_emuls for
	targ_extra_libpath.
2011-11-02 15:28:17 +00:00
DJ Delorie
99c513f6ac [.]
* configure.ac (rl78-*-*) New case.
	* configure: Regenerate.

[bfd]
	* Makefile.am (ALL_MACHINES): Add cpu-rl78.lo.
	(ALL_MACHINES_CFILES): Add cpu-rl78.c.
	(BFD32_BACKENDS): Add elf32-rl78.lo.
	(BFD32_BACKENDS_CFILES): Add elf32-rl78.c.
	(Makefile.in): Regenerate.
	* archures.c (bfd_architecture): Define bfd_arch_rl78.
	(bfd_archures_list): Add bfd_rl78_arch.
	* config.bfd: Add rl78-*-elf.
	* configure.in: Add bfd_elf32_rl78_vec.
	* reloc.c (bfd_reloc_code_type): Add BFD_RELOC_RL78_* relocations.
	* targets.c (bfd_target_vector): Add bfd_elf32_rl78_vec.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* libbfd.h: Regenerate.
	* cpu-rl78.c: New file.
	* elf32-rl78.c: New file.

[binutils]
	* readelf.c: Include elf/rl78.h
	(guess_is_rela): Handle EM_RL78.
	(dump_relocations): Likewise.
	(get_machine_name): Likewise.
	(is_32bit_abs_reloc): Likewise.
	* NEWS: Mention addition of RL78 support.
	* MAINTAINERS: Add myself as RL78 port maintainer.

[gas]
	* Makefile.am (TARGET_CPU_CFILES): Add tc-rl78.c.
	(TARGET_CPU_HFILES): Add rc-rl78.h.
	(EXTRA_DIST): Add rl78-parse.c and rl78-parse.y.
	(rl78-parse.c, rl78-parse.h, rl78-parse.o, rl78-defs.h): New rules.
	* Makefile.in: Regenerate.
	* configure.in: Add rl78 case.
	* configure: Regenerate.
	* configure.tgt: Add rl78 case.
	* config/rl78-defs.h: New file.
	* config/rl78-parse.y: New file.
	* config/tc-rl78.c: New file.
	* config/tc-rl78.h: New file.
	* NEWS: Add Renesas RL78.

	* doc/Makefile.am (c-rl78.texi): New.
	* doc/Makefile.in: Likewise.
	* doc/all.texi: Enable it.
	* doc/as.texi: Add it.

[include]
	* dis-asm.h (print_insn_rl78): Declare.

[include/elf]
	* common.h (EM_RL78, EM_78K0R): New.
	* rl78.h: New.

[include/opcode]
	* rl78.h: New file.

[ld]
	* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32rl78.c.
	(+eelf32rl78.c): New rule.
	* Makefile.in: Regenerate.
	* configure.tgt: Add rl78-*-* case.
	* emulparams/elf32rl78.sh: New file.
	* NEWS: Mention addition of Renesas RL78 support.

[opcodes]
	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add rl78-decode.c and
	rl78-dis.c.
	(MAINTAINERCLEANFILES): Add rl78-decode.c.
	(rl78-decode.c): New rule, built from rl78-decode.opc and opc2c.
	* Makefile.in: Regenerate.
	* configure.in: Add bfd_rl78_arch case.
	* configure: Regenerate.
	* disassemble.c: Define ARCH_rl78.
	(disassembler): Add ARCH_rl78 case.
	* rl78-decode.c: New file.
	* rl78-decode.opc: New file.
	* rl78-dis.c: New file.
2011-11-02 03:09:11 +00:00
Nick Clifton
cfb8c0921c bfd:
* Makefile.am (ALL_MACHINES): Add cpu-epiphany.lo .
	(ALL_MACHINES_CFILES): Add cpu-epiphany.c .
	(BFD32_BACKENDS): Add elf32-epiphany.lo .
	(BFD32_BACKENDS_CFILES): Add elf32-epiphany.c .
	* Makefile.in, bfd-in2.h, configure, libbfd.h: Regenerate.
	* archures.c (bfd_arch_epiphany): Add.
	(bfd_mach_epiphany16, bfd_mach_epiphany32): Define.
	(bfd_epiphany_arch): Declare.
	(bfd_archures_list): Add &bfd_epiphany_arch.
	* config.bfd (epiphany-*-elf): New target case.
	* configure.in (bfd_elf32_epiphany_vec): New target vector case.
	* reloc.c (BFD_RELOC_EPIPHANY_SIMM8): New relocation.
	(BFD_RELOC_EPIPHANY_SIMM24, BFD_RELOC_EPIPHANY_HIGH): Likewise.
	(BFD_RELOC_EPIPHANY_LOW, BFD_RELOC_EPIPHANY_SIMM11): Likewise.
	(BFD_RELOC_EPIPHANY_IMM11, BFD_RELOC_EPIPHANY_IMM8): Likewise.
	* targets.c (bfd_elf32_epiphany_vec): Declare.
	(_bfd_target_vector): Add bfd_elf32_epiphany_vec.
	* po/SRC-POTFILES.in, po/bfd.pot: Regenerate.
	* cpu-epiphany.c, elf32-epiphany.c: New files.
binutils:
	* readelf.c (include "elf/epiphany.h")
	(guess_is_rela, dump_relocation): Handle EM_ADAPTEVA_EPIPHANY.
	(get_machine_name, is_32bit_abs_reloc, is_32bit_pcrel_reloc): Likewise.
	(is_16bit_abs_reloc, is_none_reloc): Likewise.
	* po/binutils.pot: Regenerate.
cpu:
	* cpu/epiphany.cpu, cpu/epiphany.opc: New files.
gas:
	* NEWS: Mention addition of Adapteva Epiphany support.
	* config/tc-epiphany.c, config/tc-epiphany.h: New files.
	* Makefile.am (TARGET_CPU_CFILES): Add config/tc-epiphany.c .
	(TARGET_CPU_HFILES): Add config/tc-epiphany.h .
	* Makefile.in, configure, doc/Makefile.in, po/POTFILES.in: Regenerate.
	* configure.in: Also set using_cgen for epiphany.
	* configure.tgt: Handle epiphany.
	* doc/Makefile.am (CPU_DOCS): Add c-epiphany.texi .
	* doc/all.texi: Set EPIPHANY.
	* doc/as.texinfo: Add EPIPHANY-specific text.
	* doc/c-epiphany.texi: New file.
	* po/gas.pot: Regenerate.
gas/testsuite:
	* gas/epiphany: New directory.
include:
	* dis-asm.h (print_insn_epiphany): Declare.
	* elf/epiphany.h: New file.
	* elf/common.h (EM_ADAPTEVA_EPIPHANY): Define.
ld:
	* NEWS: Mention addition of Adapteva Epiphany support.
	* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32epiphany.c .
	(eelf32epiphany.c): New rule.
	* Makefile.in: Regenerate.
	* configure.tgt: Handle epiphany-*-elf.
	* po/ld.pot: Regenerate.
	* testsuite/ld-srec/srec.exp: xfail epiphany.
	* emulparams/elf32epiphany.sh: New file.
opcodes:
	* Makefile.am (HFILES): Add epiphany-desc.h and epiphany-opc.h .
	(TARGET_LIBOPCODES_CFILES): Add  epiphany-asm.c, epiphany-desc.c,
	epiphany-dis.c, epiphany-ibld.c and epiphany-opc.c .
	(CLEANFILES): Add stamp-epiphany.
	(EPIPHANY_DEPS): Set.  Make CGEN-generated Epiphany files depend on it.
	(stamp-epiphany): New rule.
	* Makefile.in, configure, po/POTFILES.in, po/opcodes.pot: Regenerate.
	* configure.in: Handle bfd_epiphany_arch.
	* disassemble.c (ARCH_epiphany): Define.
	(disassembler): Handle bfd_arch_epiphany.
	* epiphany-asm.c, epiphany-desc.c, epiphany-desc.h: New files.
	* epiphany-dis.c, epiphany-ibld.c, epiphany-opc.c: Likewise.
	* epiphany-opc.h: Likewise.
2011-10-25 11:18:16 +00:00
H.J. Lu
7a9068fe16 Add initial Intel K1OM support.
bfd/

2011-07-22  H.J. Lu  <hongjiu.lu@intel.com>

	* Makefile.am (ALL_MACHINES): Add cpu-k1om.lo.
	(ALL_MACHINES_CFILES): Add cpu-k1om.c.
	* Makefile.in: Regenerated.

	* archures.c (bfd_architecture): Add bfd_arch_k1om.
	(bfd_k1om_arch): New.
	(bfd_archures_list): Add &bfd_k1om_arch.
	* bfd-in2.h: Regenerated.

	* config.bfd (targ64_selvecs): Add bfd_elf64_k1om_vec if
	bfd_elf64_x86_64_vec is supported.  Add bfd_elf64_k1om_freebsd_vec
	if bfd_elf64_x86_64_freebsd_vec is supported.
	(targ_selvecs): Likewise.

	* configure.in: Support bfd_elf64_k1om_vec and
	bfd_elf64_k1om_freebsd_vec.
	* configure: Regenerated.

	* cpu-k1om.c: New.

	* elf64-x86-64.c (elf64_k1om_elf_object_p): New.
	(bfd_elf64_k1om_vec): Likewise.
	(bfd_elf64_k1om_freebsd_vec): Likewise.

	* targets.c (bfd_elf64_k1om_vec): New.
	(bfd_elf64_k1om_freebsd_vec): Likewise.
	(_bfd_target_vector): Add bfd_elf64_k1om_vec and
	bfd_elf64_k1om_freebsd_vec.

binutils/

2011-07-22  H.J. Lu  <hongjiu.lu@intel.com>

	* dwarf.c (init_dwarf_regnames): Handle EM_K1OM.

	* elfedit.c (elf_machine): Support EM_K1OM.
	(elf_class): Likewise.

	* readelf.c (guess_is_rela): Handle EM_K1OM.
	(dump_relocations): Likewise.
	(get_machine_name): Likewise.
	(get_section_type_name): Likewise.
	(get_elf_section_flags): Likewise.
	(process_section_headers): Likewise.
	(get_symbol_index_type): Likewise.
	(is_32bit_abs_reloc): Likewise.
	(is_32bit_pcrel_reloc): Likewise.
	(is_64bit_abs_reloc): Likewise.
	(is_64bit_pcrel_reloc): Likewise.
	(is_none_reloc): Likewise.

	* doc/binutils.texi: Mention K1OM for elfedit.

binutils/testsuite/

2011-07-22  H.J. Lu  <hongjiu.lu@intel.com>

	* binutils-all/elfedit.exp: Run elfedit-4.

	* binutils-all/elfedit-4.d: New.

gas/

2011-07-22  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (cpu_arch): Add k1om.
	(i386_align_code): Handle PROCESSOR_K1OM.
	(check_cpu_arch_compatible): Check EM_K1OM.
	(i386_arch): Handle Intel K1OM.
	(i386_mach): Return bfd_mach_k1om for Intel K1OM.
	(i386_target_format): Return ELF_TARGET_K1OM_FORMAT for Intel
	K1OM.

	* config/tc-i386.h (ELF_TARGET_K1OM_FORMAT): New.
	(processor_type): Add PROCESSOR_K1OM.

	* doc/c-i386.texi: Document k1om.

gas/testsuite/

2011-07-22  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/i386/k1om.d: New.
	* gas/i386/k1om-inval.l: Likewise.
	* gas/i386/k1om-inval.s: Likewise.

	* gas/i386/i386.exp: Run k1om-inval and k1om.

include/elf/

2011-07-22  H.J. Lu  <hongjiu.lu@intel.com>

	* common.h (EM_K1OM): New.

ld/

2011-07-22  H.J. Lu  <hongjiu.lu@intel.com>

	* Makefile.am (ALL_64_EMULATIONS): Add eelf_k1om.o and
	eelf_k1om_fbsd.o
	(eelf_k1om.c): New.
	(eelf_k1om_fbsd.c): Likewise.
	* Makefile.in: Regenerated.

	* configure.tgt (targ64_extra_emuls): Add elf_k1om if elf_x86_64
	is supported.  Add elf_k1om_fbsd if elf_x86_64_fbsd is supported.
	(targ_extra_emuls): Likewise.

	* emulparams/elf_k1om.sh: New.
	* emulparams/elf_k1om_fbsd.sh: Likewise.

ld/testsuite/

2011-07-22  H.J. Lu  <hongjiu.lu@intel.com>

	* ld-x86-64/abs-k1om.d: New.
	* ld-x86-64/protected2-k1om.d: Likewise.
	* ld-x86-64/protected3-k1om.d: Likewise.

	* ld-x86-64/x86-64.exp: Run abs-k1om, protected2-k1om and
	protected3-k1om.

opcodes/

2011-07-22  H.J. Lu  <hongjiu.lu@intel.com>

	* configure.in: Handle bfd_k1om_arch.
	* configure: Regenerated.

	* disassemble.c (disassembler): Handle bfd_k1om_arch.

	* i386-dis.c (print_insn): Handle bfd_mach_k1om and
	bfd_mach_k1om_intel_syntax.

	* i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to
	~(CpuL1OM|CpuK1OM).  Add CPU_K1OM_FLAGS.
	(cpu_flags): Add CpuK1OM.

	* i386-opc.h (CpuK1OM): New.
	(i386_cpu_flags): Add cpuk1om.

	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.
2011-07-22 20:22:38 +00:00
H.J. Lu
ade78dba78 Revert x86_64-x32-* change.
gas/

2011-06-20  H.J. Lu  <hongjiu.lu@intel.com>

	* configure.tgt: Revert x32 change.

ld/

2011-06-20  H.J. Lu  <hongjiu.lu@intel.com>

	* configure.tgt: Revert x32 change.

ld/testsuite/

2011-06-20  H.J. Lu  <hongjiu.lu@intel.com>

	* ld-elf/eh1.d: Revert x32 change.
	* ld-elf/eh2.d: Likewise.
	* ld-elf/eh3.d: Likewise.
	* ld-elf/eh4.d: Likewise.
2011-06-20 13:23:22 +00:00
H.J. Lu
8b7789423c Fix misc x32 bugs.
bfd/

2011-06-19  H.J. Lu  <hongjiu.lu@intel.com>

	* elf64-x86-64.c (elf_backend_post_process_headers): Defined
	for x32.

binutils/testsuite/

2011-06-19  H.J. Lu  <hongjiu.lu@intel.com>

	* binutils-all/elfedit-1.d: Updated for x32.

gas/

2011-06-19  H.J. Lu  <hongjiu.lu@intel.com>

	* configure.tgt: Support x32.

ld/

2011-06-19  H.J. Lu  <hongjiu.lu@intel.com>

	* configure.tgt: Support x32.

ld/testsuite/

2011-06-19  H.J. Lu  <hongjiu.lu@intel.com>

	* ld-elf/eh1.d: Skip x32.
	* ld-elf/eh2.d: Likewise.
	* ld-elf/eh3.d: Likewise.
	* ld-elf/eh4.d: Likewise.

	* ld-elfvsb/elfvsb.exp: Only xfail 64bit x86_64-*-linux*.
	* ld-shared/shared.exp: Likewise.

	* ld-ifunc/ifunc-1-local-x86.d: Support x32.
	* ld-ifunc/ifunc-1-x86.d: Likewise.
	* ld-ifunc/ifunc-3a-x86.d: Likewise.
	* ld-x86-64/pcrel16.d: Likewise.

	* ld-x86-64/x86-64.exp (x86_64tests): Add missing -melf_x86_64.
2011-06-19 21:22:16 +00:00
Nick Clifton
aa137e4d51 * Makefile.am (ALL_MACHINES): Add cpu-tilegx.lo and cpu-tilepro.lo.
(ALL_MACHINE_CFILES): Add cpu-tilegx.c and cpu-tilepro.c.
    (BFD32_BACKENDS): Add elf32-tilegx.lo, elf32-tilepro.lo,
    and elfxx-tilegx.lo.
    (BFD32_BACKENDS_CFILES): Add elf32-tilegx.c elf32-tilepro.c, and
    elfxx-tilegx.c.
    (BFD64_BACKENDS): Add elf64-tilegx.lo.
    (BFD64_BACKENDS_CFILES): Add elf64-tilegx.c.
    * Makefile.in: Regenerate.
    * arctures.c (bfd_architecture): Define bfd_arch_tilepro,
    bfd_arch_tilegx, bfd_mach_tilepro, bfd_mach_tilegx.
    (bfd_arch_info): Add bfd_tilegx_arch, bfd_tilepro_arch.
    (bfd_archures_list): Add bfd_tilegx_arch, bfd_tilepro_arch.
    bfd-in2.h: Regenerate.
    * config.bfd: Handle tilegx-*-* and tilepro-*-*.
    * configure.in: Handle bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec,
    and bfd_elf64_tilegx_vec.
    * configure: Regenerate.
    * elf-bfd.h (enum elf_target_id): Define TILEGX_ELF_DATA and
    TILEPRO_ELF_DATA.
    * libbfd.h: Regenerate.
    * reloc.c: Add BFD_RELOC_TILEPRO_{COPY, GLOB_DAT, JMP_SLOT,
    RELATIVE, BROFF_X1, JOFFLONG_X1, JOFFLONG_X1_PLT, IMM8_X0,
    IMM8_Y0, IMM8_X1, IMM8_Y1, DEST_IMM8_X1, MT_IMM15_X1, MF_IMM15_X1,
    IMM16_X0, IMM16_X1, IMM16_X0_LO, IMM16_X1_LO, IMM16_X0_HI,
    IMM16_X1_HI, IMM16_X0_HA, IMM16_X1_HA, IMM16_X0_PCREL,
    IMM16_X1_PCREL, IMM16_X0_LO_PCREL, IMM16_X1_LO_PCREL,
    IMM16_X0_HI_PCREL, IMM16_X1_HI_PCREL, IMM16_X0_HA_PCREL,
    IMM16_X1_HA_PCREL, IMM16_X0_GOT, IMM16_X1_GOT, IMM16_X0_GOT_LO,
    IMM16_X1_GOT_LO, IMM16_X0_GOT_HI, IMM16_X1_GOT_HI,
    IMM16_X0_GOT_HA, IMM16_X1_GOT_HA, MMSTART_X0, MMEND_X0,
    MMSTART_X1, MMEND_X1, SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1,
    IMM16_X0_TLS_GD, IMM16_X1_TLS_GD, IMM16_X0_TLS_GD_LO,
    IMM16_X1_TLS_GD_LO, IMM16_X0_TLS_GD_HI, IMM16_X1_TLS_GD_HI,
    IMM16_X0_TLS_GD_HA, IMM16_X1_TLS_GD_HA, IMM16_X0_TLS_IE,
    IMM16_X1_TLS_IE, IMM16_X0_TLS_IE_LO, IMM16_X1_TLS_IE_LO,
    IMM16_X0_TLS_IE_HI, IMM16_X1_TLS_IE_HI, IMM16_X0_TLS_IE_HA,
    IMM16_X1_TLS_IE_HA, TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32}
    Add BFD_RELOC_TILEGX_{HW0, HW1, HW2, HW3, HW0_LAST, HW1_LAST,
    HW2_LAST, COPY, GLOB_DAT, JMP_SLOT, RELATIVE, BROFF_X1,
    JUMPOFF_X1, JUMPOFF_X1_PLT, IMM8_X0, IMM8_Y0, IMM8_X1, IMM8_Y1,
    DEST_IMM8_X1, MT_IMM14_X1, MF_IMM14_X1, MMSTART_X0, MMEND_X0,
    SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1, IMM16_X0_HW0,
    IMM16_X1_HW0, IMM16_X0_HW1, IMM16_X1_HW1, IMM16_X0_HW2,
    IMM16_X1_HW2, IMM16_X0_HW3, IMM16_X1_HW3, IMM16_X0_HW0_LAST,
    IMM16_X1_HW0_LAST, IMM16_X0_HW1_LAST, IMM16_X1_HW1_LAST,
    IMM16_X0_HW2_LAST, IMM16_X1_HW2_LAST, IMM16_X0_HW0_PCREL,
    IMM16_X1_HW0_PCREL, IMM16_X0_HW1_PCREL, IMM16_X1_HW1_PCREL,
    IMM16_X0_HW2_PCREL, IMM16_X1_HW2_PCREL, IMM16_X0_HW3_PCREL,
    IMM16_X1_HW3_PCREL, IMM16_X0_HW0_LAST_PCREL,
    IMM16_X1_HW0_LAST_PCREL, IMM16_X0_HW1_LAST_PCREL,
    IMM16_X1_HW1_LAST_PCREL, IMM16_X0_HW2_LAST_PCREL,
    IMM16_X1_HW2_LAST_PCREL, IMM16_X0_HW0_GOT, IMM16_X1_HW0_GOT,
    IMM16_X0_HW1_GOT, IMM16_X1_HW1_GOT, IMM16_X0_HW2_GOT,
    IMM16_X1_HW2_GOT, IMM16_X0_HW3_GOT, IMM16_X1_HW3_GOT,
    IMM16_X0_HW0_LAST_GOT, IMM16_X1_HW0_LAST_GOT,
    IMM16_X0_HW1_LAST_GOT, IMM16_X1_HW1_LAST_GOT,
    IMM16_X0_HW2_LAST_GOT, IMM16_X1_HW2_LAST_GOT, IMM16_X0_HW0_TLS_GD,
    IMM16_X1_HW0_TLS_GD, IMM16_X0_HW1_TLS_GD, IMM16_X1_HW1_TLS_GD,
    IMM16_X0_HW2_TLS_GD, IMM16_X1_HW2_TLS_GD, IMM16_X0_HW3_TLS_GD,
    IMM16_X1_HW3_TLS_GD, IMM16_X0_HW0_LAST_TLS_GD,
    IMM16_X1_HW0_LAST_TLS_GD, IMM16_X0_HW1_LAST_TLS_GD,
    IMM16_X1_HW1_LAST_TLS_GD, IMM16_X0_HW2_LAST_TLS_GD,
    IMM16_X1_HW2_LAST_TLS_GD, IMM16_X0_HW0_TLS_IE,
    IMM16_X1_HW0_TLS_IE, IMM16_X0_HW1_TLS_IE, IMM16_X1_HW1_TLS_IE,
    IMM16_X0_HW2_TLS_IE, IMM16_X1_HW2_TLS_IE, IMM16_X0_HW3_TLS_IE,
    IMM16_X1_HW3_TLS_IE, IMM16_X0_HW0_LAST_TLS_IE,
    IMM16_X1_HW0_LAST_TLS_IE, IMM16_X0_HW1_LAST_TLS_IE,
    IMM16_X1_HW1_LAST_TLS_IE, IMM16_X0_HW2_LAST_TLS_IE,
    IMM16_X1_HW2_LAST_TLS_IE, TLS_DTPMOD64, TLS_DTPOFF64, TLS_TPOFF64,
    TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32}
    * targets.c (bfd_elf32_tilegx_vec): Declare.
    (bfd_elf32_tilepro_vec): Declare.
    (bfd_elf64_tilegx_vec): Declare.
    (bfd_target_vector): Add bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec,
    and bfd_elf64_tilegx_vec.
    * cpu-tilegx.c: New file.
    * cpu-tilepro.c: New file.
    * elf32-tilepro.h: New file.
    * elf32-tilepro.c: New file.
    * elf32-tilegx.c: New file.
    * elf32-tilegx.h: New file.
    * elf64-tilegx.c: New file.
    * elf64-tilegx.h: New file.
    * elfxx-tilegx.c: New file.
    * elfxx-tilegx.h: New file.

	* Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and
	config/tc-tilepro.c.
	(TARGET_CPU_HFILES): Add config/tc-tilegx.h and
	config/tc-tilepro.h.
	* Makefile.in: Regenerate.
	* configure.tgt (tilepro-*-*): New.
	(tilegx-*-*): Likewise.
	* config/tc-tilegx.c: New file.
	* config/tc-tilegx.h: Likewise.
	* config/tc-tilepro.h: Likewise.
	* config/tc-tilepro.c: Likewise.
	* doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and
	c-tilepro.texi.
	* doc/Makefile.in: Regenerate.
	* doc/all.texi (TILEGX): Define.
	(TILEPRO): Define.
	* doc/as.texinfo: Add Tile-Gx and TILEPro documentation.  Include
	c-tilegx.texi and c-tilepro.texi.
	* doc/c-tilegx.texi: New.
	* doc/c-tilepro.texi: New.

        * gas/tilepro/t_constants.s: New file.
	* gas/tilepro/t_constants.d: Likewise.
	* gas/tilepro/t_insns.s: Likewise.
	* gas/tilepro/tilepro.exp: Likewise.
	* gas/tilepro/t_insns.d: Likewise.
	* gas/tilegx/tilegx.exp: Likewise.
	* gas/tilegx/t_insns.d: Likewise.
	* gas/tilegx/t_insns.s: Likewise.

	* dis-asm.h (print_insn_tilegx): Declare.
	(print_insn_tilepro): Likewise.

	* tilegx.h: New file.
	* tilepro.h: New file.

	* common.h: Add EM_TILEGX.
	* tilegx.h: New file.
	* tilepro.h: New file.

	* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32tilegx.c and
	eelf32tilepro.c.
	(ALL_64_EMULATION_SOURCES): Add eelf64tilegx.c.
	(eelf32tilegx.c): New target.
	(eelf32tilepro.c): Likewise.
	(eelf64tilegx.c): Likewise.
	* Makefile.in: Regenerate.
	* configure.tgt: Handle tilegx-*-* and tilepro-*-*.
	* emulparams/elf32tilegx.sh: New file.
	* emulparams/elf64tilegx.sh: New file.
	* emulparams/elf32tilepro.sh: New file.

	* ld-elf/eh5.d: Don't run on tile*.
	* ld-srec/srec.exp: xfail on tile*.
	* ld-tilegx/external.s: New file.
	* ld-tilegx/reloc.d: New file.
	* ld-tilegx/reloc.s: New file.
	* ld-tilegx/tilegx.exp: New file.
	* ld-tilepro/external.s: New file.
	* ld-tilepro/reloc.d: New file.
	* ld-tilepro/reloc.s: New file.
	* ld-tilepro/tilepro.exp: New file.

	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add tilegx-dis.c,
	tilegx-opc.c, tilepro-dis.c, and tilepro-opc.c.
	* Makefile.in: Regenerate.
	* configure.in: Handle bfd_tilegx_arch and bfd_tilepro_arch.
	* configure: Regenerate.
	* disassemble.c (disassembler): Add ARCH_tilegx and ARCH_tilepro.
	* po/POTFILES.in: Regenerate.
	* tilegx-dis.c: New file.
	* tilegx-opc.c: New file.
	* tilepro-dis.c: New file.
	* tilepro-opc.c: New file.
2011-06-13 15:18:54 +00:00
Nick Clifton
ab3719da06 configure.tgt: Accept any V850 architecture. 2011-06-08 07:43:18 +00:00
Bernd Schmidt
2a6163793f ld/
(eelf32_tic6x_linux_be.c, eelf32_tic6x_linux_le.c,
	eelf32_tic6x_elf_be.c, eelf32_tic6x_elf_le.c): New rules.
	* Makefile.am (ALL_EMULATIONS): Add these files.
	(eelf32_tic6x_be.c, eelf32_tic6x_le.c): Depend on tic6xdsbt.em.
	* Makefile.in: Regenerated.
	* emultempl/tic6xdsbt.em (is_tic6x_target): Allow more tic6x target
	vectors.
	* emulparams/elf32_tic6x_elf_be.sh: New file.
	* emulparams/elf32_tic6x_elf_le.sh: New file.
	* emulparams/elf32_tic6x_linux_be.sh: New file.
	* emulparams/elf32_tic6x_linux_le.sh: New file.
	* configure.tgt (tic6x-*-elf, tic6x-*-uclinux): New.
	(tic6x-*-*): Replaced by these.

	ld/testsuite/
	* ld-tic6x/dsbt.ld (OUTPUT_FORMAT): Add.
	* ld-tic6x/tic6x.exp: Add OSABI tests.

	bfd/
	* config.bfd (tic6x-*-elf, tic6x-*-uclinux): New.
	(tic6x-*-*): Replaced by these.
	* elf32-tic6x.c (elf32_tic6x_set_osabi): New static function.
	(elf32_tic6x_check_relocs): Create dynamic sections if -shared.
	(elf_backend_relocs_compatible, elf_backend_post_process_headers):
	Define.
	(elf32_bed, TARGET_LITTLE_SYM, TARGET_LITTLE_NAME, TARGET_BIG_SYM,
	TARGET_BIG_NAME, ELF_OSABI): Redefine twice, and include
	"elf32-target.h" two more times.
	* configure.in: Handle bfd_elf32_tic6x_linux_be_vec,
	bfd_elf32_tic6x_linux_le_vec, bfd_elf32_tic6x_elf_be_vec and
	bfd_elf32_tic6x_elf_le_vec.
	* configure: Regenerate.
2011-05-13 18:15:33 +00:00
Jan Beulich
3ac5406bdb bfd/
2011-05-13  Jan Beulich  <jbeulich@novell.com>

	* config.bfd: Add targets x86_64-*-pe and x86_64-*-pep.

ld/
2011-05-13  Jan Beulich  <jbeulich@novell.com>

	* configure.tgt: Add targets x86_64-*-pe and x86_64-*-pep.
2011-05-13 06:43:13 +00:00
Nick Clifton
0e9dfb4626 PR ld/12643
* configure.tgt: Add support for arm-*-gnueabihf targets.
2011-04-08 16:05:12 +00:00
Joseph Myers
91db4c57cf * configure.tgt: Remove stray ;;. 2011-04-07 01:19:22 +00:00
Joseph Myers
8c5fc80011 bfd:
* config.bfd (thumb-*-oabi): Don't handle in list of obsolete
	targets.
	(strongarm*, thumb*, xscale*): Remove architectures.
	(strongarm-*-kaos*, thumb-*-coff, thumb-*-elf, thumb-epoc-pe*,
	thumb-*-pe*, strongarm-*-elf, strongarm-*-coff, xscale-*-elf,
	xscale-*-coff): Remove targets.

binutils:
	* configure.in (thumb-*-pe*): Remove.
	* configure: Regenerate.

binutils/testsuite:
	* binutils-all/objcopy.exp (*arm*-*-coff): Change to arm*-*-coff.
	(xscale-*-coff, thumb*-*-coff, thumb*-*-pe): Don't handle.

gas:
	* configure.tgt (strongarm*be, strongarm*b, strongarm*,
	xscale*be|xscale*b, xscale*): Remove architectures.
	(thumb-*-coff, thumb-*-rtems*, thumb-*-elf, thumb-epoc-pe,
	thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets.

gas/testsuite:
	* gas/all/gas.exp (*arm*-*-coff): Change to arm*-*-coff.
	(thumb*-*-coff, thumb*-*-pe*): Don;t handle.
	* gas/arm/arm.exp (*arm*-*-*): Change to arm*-*-*.
	(*xscale*-*-*): Don't handle.
	* gas/cfi/cfi.exp (xscale*-*): Don't handle.
	* gas/elf/elf.exp (*arm*-*-*): Change to arm*-*-*.
	(xscale*-*-*): Don't handle.

ld:
	* configure.tgt (thumb-*-linux-* | thumb-*-uclinux*,
	strongarm-*-coff, strongarm-*-elf, strongarm-*-kaos*,
	thumb-*-coff, thumb-*-elf, thumb-epoc-pe, thumb-*-pe,
	xscale-*-coff, xscale-*-elf): Remove targets.

ld/testsuite:
	* ld-selective/selective.exp (xscale-*-*): Don't handle.
	* ld-srec/srec.exp (strongarm*-*-*, xscale*-*-*, thumb-*-*): Don't
	handle.
	(*arm*-*-*): Change to arm*-*-*.
	(strongarm*-*-coff, xscale*-*-coff, thumb-*-coff*, thumb-*-pe*,
	thumb-*-elf*, strongarm*-*-*, thumb-*-*): Remove xfails.
	* ld-undefined/undefined.exp (thumb*-*-pe*, thumb*-*-pe*): Remove
	commented-out xfails.
	(thumb-elf): Remove reference in comment.
	* lib/ld-lib.exp (strongarm*-*-*, xscale*-*-*, thumb-*-*): Don't
	handle.
2011-04-06 17:09:56 +00:00
H.J. Lu
d02c4aae3d Fix elf_l1om linker scripts.
2011-03-31  H.J. Lu  <hongjiu.lu@intel.com>

	* configure.tgt: Add elf_l1om to targ_extra_libpath for
	 x86_64-*-linux-*.

	* emulparams/elf_l1om.sh: Remove duplicates.
2011-03-31 22:23:09 +00:00
Nick Clifton
5b806d2793 Add support for DragonFlyBSD target. 2011-03-28 11:18:27 +00:00
Eric B. Weddington
8cc66334fa /bfd:
2011-03-22  Eric B. Weddington  <eric.weddington@atmel.com>

	* archures.c: Add AVR XMEGA architecture information.
	* cpu-avr.c (arch_info_struct): Likewise.
	* elf32-avr.c (bfd_elf_avr_final_write_processing): Likewise.
	(elf32_avr_object_p): Likewise.

/gas:
2011-03-22  Eric B. Weddington  <eric.weddington@atmel.com>

	* config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
	(AVR_INSN): Change definition to match.
	(avr_opcodes): Likewise, change to match.
	(mcu_types): Add XMEGA architecture names and new XMEGA device names.
	(md_show_usage): Add XMEGA architecture names.
	(avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
	Add support for SPM Z+ instruction.
	* doc/c-avr.texi: Add documentation for XMEGA architectures and
	devices.

/include/opcode:
2011-03-22  Eric B. Weddington  <eric.weddington@atmel.com>

	* avr.h (AVR_ISA_SPMX,AVR_ISA_DES,AVR_ISA_M256,AVR_ISA_XMEGA):
	New instruction set flags.
	(AVR_INSN): Add new instructions for SPM Z+, DES for XMEGA.

/ld:
2011-03-22  Eric B. Weddington  <eric.weddington@atmel.com>

	* Makefile.am (ALL_EMULATION_SOURCES): Add AVR XMEGA architectures.
	(eavrxmega?.c): Likewise.
	* configure.tgt (targ_extra_emuls): Likewise.
	* emulparams/avrxmega1.sh: New file.
	* emulparams/avrxmega2.sh: Likewise.
	* emulparams/avrxmega3.sh: Likewise.
	* emulparams/avrxmega4.sh: Likewise.
	* emulparams/avrxmega5.sh: Likewise.
	* emulparams/avrxmega6.sh: Likewise.
	* emulparams/avrxmega7.sh: Likewise.
	* emultempl/avrelf.em (avr_elf_${EMULATION_NAME}_before_allocation):
	Add avrxmega6, avrxmega7 to list of architectures for no stubs.

/opcodes:
2011-03-22  Eric B. Weddington  <eric.weddington@atmel.com>

	* avr-dis.c (avr_operand): Add opcode_str parameter. Check for
	post-increment to support LPM Z+ instruction. Add support for 'E'
	constraint for DES instruction.
	(print_insn_avr): Adjust calls to avr_operand. Rename variable.
2011-03-22 18:10:48 +00:00
Richard Sandiford
aeffff6722 bfd/
2010-12-23  Robert Millan  <rmh@gnu.org>

	* config.bfd: Recognize mips-freebsd and mips-kfreebsd-gnu.
	* configure.host: Likewise.
	* configure.in: Support for `bfd_elf32_ntradbigmips_freebsd_vec',
	`bfd_elf32_ntradlittlemips_freebsd_vec',
	`bfd_elf32_tradbigmips_freebsd_vec',
	`bfd_elf32_tradlittlemips_freebsd_vec',
	`bfd_elf64_tradbigmips_freebsd_vec' and
	`bfd_elf64_tradlittlemips_freebsd_vec'.
	* configure: Regenerate.
	* elf32-mips.c: New target for FreeBSD support
	(same as traditional MIPS but overrides ELF_OSABI
	with ELFOSABI_FREEBSD).
	* elf64-mips.c: Likewise.
	* elfn32-mips.c: Likewise.
	* targets.c (_bfd_target_vector): Add
	`bfd_elf32_ntradbigmips_freebsd_vec',
	`bfd_elf32_ntradlittlemips_freebsd_vec',
	`bfd_elf32_tradbigmips_freebsd_vec',
	`bfd_elf32_tradlittlemips_freebsd_vec',
	`bfd_elf64_tradbigmips_freebsd_vec' and
	`bfd_elf64_tradlittlemips_freebsd_vec'.

ld/
2010-12-14  Robert Millan  <rmh@gnu.org>

	* configure.tgt: Recognize mips-freebsd and mips-kfreebsd-gnu.

	* emulparams/elf32btsmip_fbsd.sh: New file.
	* emulparams/elf32btsmipn32_fbsd.sh: Likewise.
	* emulparams/elf32ltsmip_fbsd.sh: Likewise.
	* emulparams/elf32ltsmipn32_fbsd.sh: Likewise.
	* emulparams/elf64btsmip_fbsd.sh: Likewise.
	* emulparams/elf64ltsmip_fbsd.sh: Likewise.

	* Makefile.am: Add build rules for `eelf32btsmip_fbsd.c',
	`eelf32btsmipn32_fbsd.c', `eelf32ltsmip_fbsd.c',
	`eelf32ltsmipn32_fbsd.c', `eelf64btsmip_fbsd.c' and
	`eelf64ltsmip_fbsd.c'.
	* Makefile.in: Regenerate.

gas/
2010-12-19  Robert Millan  <rmh@gnu.org>
	    Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (ELF_TARGET): New macro.  Generates target
	names accordingly to whether TE_FreeBSD and whether TE_TMIPS
	are defined.
	(mips_target_format): Refactor code using ELF_TARGET().
	(support_64bit_objects): Likewise.

	* configure.in: Recognize mips-freebsd and mips-kfreebsd-gnu.
	* configure.tgt: Likewise.
	* configure: Regenerate.

binutils/testsuite/
	* binutils-all/readelf.exp: Handle MIPS FreeBSD targets.

gas/testsuite/
	* gas/mips/e32el-rel2.d: Accept any file format.
	* gas/mips/elf-rel.d: Likewise.
	* gas/mips/elf-rel2.d: Likewise.
	* gas/mips/elf-rel3.d: Likewise.
	* gas/mips/elfel-rel.d: Likewise.
	* gas/mips/elfel-rel2.d: Likewise.
	* gas/mips/elfel-rel3.d: Likewise.
	* gas/mips/ldstla-32-mips3-shared.d: Likewise.
	* gas/mips/ldstla-32-mips3.d: Likewise.
	* gas/mips/ldstla-32-shared.d: Likewise.
	* gas/mips/ldstla-32.d: Likewise.
	* gas/mips/ldstla-n64-shared.d: Likewise.
	* gas/mips/ldstla-n64.d: Likewise.
	* gas/mips/noat-1.d: Likewise.
	* gas/mips/set-arch.d: Likewise.
	* gas/mips/tls-o32.d: Likewise.

ld/testsuite/
	* ld-mips-elf/mips-elf-flags.exp: Handle FreeBSD targets.
	* ld-mips-elf/mips-elf.exp: Likewise.
	* ld-mips-elf/mips16-call-global.d: Accept any file format.
	* ld-mips-elf/mips16-intermix.d: Likewise.
2010-12-31 11:01:00 +00:00
H.J. Lu
351f65ca26 Add x86-64 ILP32 support.
bfd/

2010-12-30  H.J. Lu  <hongjiu.lu@intel.com>

	* archures.c (bfd_mach_x64_32): New.
	(bfd_mach_x64_32_intel_syntax): Likewise.
	* bfd-in2.h: Regenerated.

	* config.bfd (targ64_selvecs): Add bfd_elf32_x86_64_vec for
	i[3-7]86-*-linux-*.
	(targ_selvecs): Add bfd_elf32_x86_64_vec for x86_64-*-linux-*.

	* configure.in: Support bfd_elf32_x86_64_vec.
	* configure: Regenerated.

	* cpu-i386.c (bfd_x64_32_arch_intel_syntax): New.
	(bfd_x64_32_arch): Likewise.

	* elf-bfd.h (elf_append_rela): New prototype.
	(elf_append_rel): Likewise.
	(elf64_r_info): Likewise.
	(elf32_r_info): Likewise.
	(elf64_r_sym): Likewise.
	(elf32_r_sym): Likewise.

	* elf64-x86-64.c (ABI_64_P): New.
	(elf_x86_64_info_to_howto): Replace ELF64_R_TYPE with
	ELF32_R_TYPE.  Replace ELF64_ST_TYPE with ELF_ST_TYPE.
	(elf_x86_64_check_tls_transition):Likewise.
	(elf_x86_64_check_relocs): Likewise.
	(elf_x86_64_gc_mark_hook):Likewise.
	(elf_x86_64_gc_sweep_hook): Likewise.
	(elf_x86_64_relocate_section): Likewise.
	(elf_x86_64_reloc_type_class): Likewise.
	(ELF_DYNAMIC_INTERPRETER): Renamed to ...
	(ELF64_DYNAMIC_INTERPRETER): This.
	(ELF32_DYNAMIC_INTERPRETER): New.
	(elf_x86_64_link_hash_table): Add r_info, r_sym, swap_reloca_out,
	dynamic_interpreter and dynamic_interpreter_size.
	(elf_x86_64_get_local_sym_hash): Replace ELF64_R_SYM with
	htab->r_sym.  Replace ELF64_R_INFO with htab->r_info.
	(elf_x86_64_get_local_sym_hash): Likewise.
	(elf_x86_64_check_tls_transition):Likewise.
	(elf_x86_64_check_relocs): Likewise.
	(elf_x86_64_gc_mark_hook):Likewise.
	(elf_x86_64_gc_sweep_hook): Likewise.
	(elf_x86_64_relocate_section): Likewise.
	(elf_x86_64_finish_dynamic_symbol): Likewise.
	(elf_x86_64_finish_local_dynamic_symbol): Likewise.
	(elf_x86_64_link_hash_table_create): Initialize r_info, r_sym,
	swap_reloca_out, dynamic_interpreter and dynamic_interpreter_size.
	(elf_x86_64_check_relocs): Check ABI_64_P when requesting for
	PIC.
	(elf_x86_64_relocate_section): Likewise.
	(elf64_x86_64_adjust_dynamic_symbol): Replace sizeof
	(Elf64_External_Rela) with bed->s->sizeof_rela.
	(elf64_x86_64_allocate_dynrelocs): Likewise.
	(elf64_x86_64_size_dynamic_sections): Likewise.
	(elf64_x86_64_finish_dynamic_symbol): Likewise.
	(elf64_x86_64_append_rela): Removed.
	(elf32_x86_64_elf_object_p): New.
	Add bfd_elf32_x86_64_vec.

	* elf64-x86-64.c (elf64_x86_64_xxx): Renamed to ...
	(elf_x86_64_xxx): This.

	* elflink.c (bfd_elf_final_link): Check ELF file class on error.
	(elf_append_rela): New.
	(elf_append_rel): Likewise.
	(elf64_r_info): Likewise.
	(elf32_r_info): Likewise.
	(elf64_r_sym): Likewise.
	(elf32_r_sym): Likewise.

	* targets.c (bfd_elf32_x86_64_vec): New.
	(_bfd_target_vector): Add bfd_elf32_x86_64_vec.

gas/

2010-12-30  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (x86_elf_abi): New.
	(i386_mach): Return bfd_mach_x64_32 for ILP32.
	(OPTION_N32): Likewise.
	(md_longopts): Add "n32" for ELF.
	(md_parse_option): Handle OPTION_N32.
	(md_show_usage): Add --n32.
	(i386_target_format): Update and check x86_elf_abi.

	* config/tc-i386.h (ELF_TARGET_FORMAT32): New.

	* doc/as.texinfo: Document --n32.
	* doc/c-i386.texi: Likewise.

gas/testsuite/

2010-12-30  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/i386/ilp32/lns/ilp32.exp: New.
	* gas/i386/ilp32/lns/lns-common-1.d: Likewise.
	* gas/i386/ilp32/lns/lns-duplicate.d: Likewise.

	* gas/i386/ilp32/cfi/cfi-common-1.d: New.
	* gas/i386/ilp32/cfi/cfi-common-2.d: Likewise.
	* gas/i386/ilp32/cfi/cfi-common-3.d: Likewise.
	* gas/i386/ilp32/cfi/cfi-common-4.d: Likewise.
	* gas/i386/ilp32/cfi/cfi-common-5.d: Likewise.
	* gas/i386/ilp32/cfi/cfi-common-6.d: Likewise.
	* gas/i386/ilp32/cfi/cfi-common-7.d: Likewise.
	* gas/i386/ilp32/cfi/cfi-x86_64.d: Likewise.
	* gas/i386/ilp32/cfi/ilp32.exp: Likewise.
	* gas/i386/ilp32/elf/ehopt0.d: Likewise.
	* gas/i386/ilp32/elf/equ-reloc.d: Likewise.
	* gas/i386/ilp32/elf/file.d: Likewise.
	* gas/i386/ilp32/elf/group0a.d: Likewise.
	* gas/i386/ilp32/elf/group0b.d: Likewise.
	* gas/i386/ilp32/elf/group1a.d: Likewise.
	* gas/i386/ilp32/elf/group1b.d: Likewise.
	* gas/i386/ilp32/elf/ifunc-1.d: Likewise.
	* gas/i386/ilp32/elf/ilp32.exp: Likewise.
	* gas/i386/ilp32/elf/redef.d: Likewise.
	* gas/i386/ilp32/elf/section0.d: Likewise.
	* gas/i386/ilp32/elf/section1.d: Likewise.
	* gas/i386/ilp32/elf/section3.d: Likewise.
	* gas/i386/ilp32/elf/section4.d: Likewise.
	* gas/i386/ilp32/elf/section6.d: Likewise.
	* gas/i386/ilp32/elf/section7.d: Likewise.
	* gas/i386/ilp32/elf/struct.d: Likewise.
	* gas/i386/ilp32/elf/symtab.d: Likewise.
	* gas/i386/ilp32/elf/symver.d: Likewise.

	* gas/i386/ilp32/ilp32.exp: New.
	* gas/i386/ilp32/immed64.d: Likewise.
	* gas/i386/ilp32/mixed-mode-reloc64.d: Likewise.
	* gas/i386/ilp32/reloc64.d: Likewise.
	* gas/i386/ilp32/rex.d: Likewise.
	* gas/i386/ilp32/rexw.d: Likewise.
	* gas/i386/ilp32/svme64.d: Likewise.
	* gas/i386/ilp32/x86-64-addr32.d: Likewise.
	* gas/i386/ilp32/x86-64-addr32-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-aes.d: Likewise.
	* gas/i386/ilp32/x86-64-aes-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-amdfam10.d: Likewise.
	* gas/i386/ilp32/x86-64-arch-1.d: Likewise.
	* gas/i386/ilp32/x86-64-arch-2.d: Likewise.
	* gas/i386/ilp32/x86-64-avx.d: Likewise.
	* gas/i386/ilp32/x86-64-avx-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-avx-swap.d: Likewise.
	* gas/i386/ilp32/x86-64-avx-swap-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-branch.d: Likewise.
	* gas/i386/ilp32/x86-64-cbw.d: Likewise.
	* gas/i386/ilp32/x86-64-cbw-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-clmul.d: Likewise.
	* gas/i386/ilp32/x86-64-clmul-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-crc32.d: Likewise.
	* gas/i386/ilp32/x86-64-crc32-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-crx.d: Likewise.
	* gas/i386/ilp32/x86-64-crx-suffix.d: Likewise.
	* gas/i386/ilp32/x86-64.d: Likewise.
	* gas/i386/ilp32/x86-64-disp.d: Likewise.
	* gas/i386/ilp32/x86-64-disp-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-drx.d: Likewise.
	* gas/i386/ilp32/x86-64-drx-suffix.d: Likewise.
	* gas/i386/ilp32/x86-64-ept.d: Likewise.
	* gas/i386/ilp32/x86-64-ept-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-fma4.d: Likewise.
	* gas/i386/ilp32/x86-64-fma.d: Likewise.
	* gas/i386/ilp32/x86-64-fma-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-gidt.d: Likewise.
	* gas/i386/ilp32/x86-64-ifunc.d: Likewise.
	* gas/i386/ilp32/x86-64-intel64.d: Likewise.
	* gas/i386/ilp32/x86-64-io.d: Likewise.
	* gas/i386/ilp32/x86-64-io-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-io-suffix.d: Likewise.
	* gas/i386/ilp32/x86-64-localpic.d: Likewise.
	* gas/i386/ilp32/x86-64-mem.d: Likewise.
	* gas/i386/ilp32/x86-64-mem-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-movbe.d: Likewise.
	* gas/i386/ilp32/x86-64-movbe-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-nops-1-core2.d: Likewise.
	* gas/i386/ilp32/x86-64-nops-1.d: Likewise.
	* gas/i386/ilp32/x86-64-nops-1-k8.d: Likewise.
	* gas/i386/ilp32/x86-64-nops-1-nocona.d: Likewise.
	* gas/i386/ilp32/x86-64-nops-1-pentium.d: Likewise.
	* gas/i386/ilp32/x86-64-nops-2.d: Likewise.
	* gas/i386/ilp32/x86-64-nops-3.d: Likewise.
	* gas/i386/ilp32/x86-64-nops-4-core2.d: Likewise.
	* gas/i386/ilp32/x86-64-nops-4.d: Likewise.
	* gas/i386/ilp32/x86-64-nops-4-k8.d: Likewise.
	* gas/i386/ilp32/x86-64-nops-5.d: Likewise.
	* gas/i386/ilp32/x86-64-nops-5-k8.d: Likewise.
	* gas/i386/ilp32/x86-64-nops.d: Likewise.
	* gas/i386/ilp32/x86-64-opcode.d: Likewise.
	* gas/i386/ilp32/x86-64-opcode-inval.d: Likewise.
	* gas/i386/ilp32/x86-64-opcode-inval-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-opts.d: Likewise.
	* gas/i386/ilp32/x86-64-opts-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-pcrel.d: Likewise.
	* gas/i386/ilp32/x86-64-reg.d: Likewise.
	* gas/i386/ilp32/x86-64-reg-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-rep.d: Likewise.
	* gas/i386/ilp32/x86-64-rep-suffix.d: Likewise.
	* gas/i386/ilp32/x86-64-rip.d: Likewise.
	* gas/i386/ilp32/x86-64-rip-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-sib.d: Likewise.
	* gas/i386/ilp32/x86-64-sib-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-simd.d: Likewise.
	* gas/i386/ilp32/x86-64-simd-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-simd-suffix.d: Likewise.
	* gas/i386/ilp32/x86-64-sse2avx.d: Likewise.
	* gas/i386/ilp32/x86-64-sse2avx-opts.d: Likewise.
	* gas/i386/ilp32/x86-64-sse2avx-opts-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-sse3.d: Likewise.
	* gas/i386/ilp32/x86-64-sse4_1.d: Likewise.
	* gas/i386/ilp32/x86-64-sse4_1-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-sse4_2.d: Likewise.
	* gas/i386/ilp32/x86-64-sse4_2-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-sse-check.d: Likewise.
	* gas/i386/ilp32/x86-64-sse-check-none.d: Likewise.
	* gas/i386/ilp32/x86-64-sse-check-warn.d: Likewise.
	* gas/i386/ilp32/x86-64-sse-noavx.d: Likewise.
	* gas/i386/ilp32/x86-64-ssse3.d: Likewise.
	* gas/i386/ilp32/x86-64-stack.d: Likewise.
	* gas/i386/ilp32/x86-64-stack-intel.d: Likewise.
	* gas/i386/ilp32/x86-64-stack-suffix.d: Likewise.
	* gas/i386/ilp32/x86-64-unwind.d: Likewise.
	* gas/i386/ilp32/x86-64-vmx.d: Likewise.
	* gas/i386/ilp32/x86-64-xsave.d: Likewise.
	* gas/i386/ilp32/x86-64-xsave-intel.d: Likewise.

ld/

2010-12-30  H.J. Lu  <hongjiu.lu@intel.com>

	* emulparams/elf32_x86_64.sh: New.

	* configure.tgt (targ64_extra_emuls): Add elf32_x86_64 for
	i[3-7]86-*-linux-*.
	(targ_extra_libpath): Likewise.
	(targ_extra_emuls): Add elf32_x86_64 for x86_64-*-linux-*.
	(targ_extra_libpath): Likewise.

	* Makefile.am (ALL_64_EMULATION_SOURCES): Add eelf32_x86_64.c.
	(eelf32_x86_64.c): New.
	* Makefile.in: Regenerated.

opcodes/

2010-12-30  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (print_insn): Support bfd_mach_x64_32 and
	bfd_mach_x64_32_intel_syntax.
2010-12-31 00:33:36 +00:00
Alan Modra
9203b09a4b Add sparc64-rtems. 2010-11-30 01:14:08 +00:00
Richard Henderson
c518ddd883 Select 32-bit pei for 64-bit pei configurations. 2010-09-02 22:54:44 +00:00
Alan Modra
360cfc9c8b remove maxq-coff port 2010-06-29 04:17:34 +00:00
Nick Clifton
8e45593ff3 2010-05-21 Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers  <joseph@codesourcery.com>
            Andrew Stubbs  <ams@codesourcery.com>

        bfd/
        * config.bfd (sh-*-uclinux* | sh[12]-*-uclinux*): Add
        bfd_elf32_shl_vec, and FDPIC vectors to targ_selvecs.
        * configure.in: Handle FDPIC vectors.
        * elf32-sh-relocs.h: Add FDPIC and movi20 relocations.
        * elf32-sh.c (DEFAULT_STACK_SIZE): Define.
        (SYMBOL_FUNCDESC_LOCAL): Define.  Use it instead of
        SYMBOL_REFERENCES_LOCAL for function descriptors.
        (fdpic_object_p): New.
        (sh_reloc_map): Add FDPIC and movi20 relocations.
        (sh_elf_info_to_howto, sh_elf_relocate_section): Handle new invalid
        range.
        (struct elf_sh_plt_info): Add got20 and short_plt.  Update all
        definitions.
        (FDPIC_PLT_ENTRY_SIZE, FDPIC_PLT_LAZY_OFFSET): Define.
        (fdpic_sh_plt_entry_be, fdpic_sh_plt_entry_le, fdpic_sh_plts): New.
        (FDPIC_SH2A_PLT_ENTRY_SIZE, FDPIC_SH2A_PLT_LAZY_OFFSET): Define.
        (fdpic_sh2a_plt_entry_be, fdpic_sh2a_plt_entry_le)
        (fdpic_sh2a_short_plt_be, fdpic_sh2a_short_plt_le, fdpic_sh2a_plts):
        New.
        (get_plt_info): Handle FDPIC.
        (MAX_SHORT_PLT): Define.
        (get_plt_index, get_plt_offset): Handle short_plt.
        (union gotref): New.
        (struct elf_sh_link_hash_entry): Add funcdesc, rename tls_type to
        got_type and adjust all uses.  Add GOT_FUNCDESC.
        (struct sh_elf_obj_tdata): Add local_funcdesc.  Rename
        local_got_tls_type to local_got_type.
        (sh_elf_local_got_type): Renamed from sh_elf_local_got_tls_type.  All
        users changed.
        (sh_elf_local_funcdesc): Define.
        (struct elf_sh_link_hash_table): Add sfuncdesc, srelfuncdesc, fdpic_p,
        and srofixup.
        (sh_elf_link_hash_newfunc): Initialize new fields.
        (sh_elf_link_hash_table_create): Set fdpic_p.
        (sh_elf_omit_section_dynsym): New.
        (create_got_section): Create .got.funcdesc, .rela.got.funcdesc
        and .rofixup.
        (allocate_dynrelocs): Allocate local function descriptors and space
        for R_SH_FUNCDESC-related relocations, and for rofixups.
        Handle GOT_FUNCDESC.  Create fixups.  Handle GOT entries which
        require function descriptors.
        (sh_elf_always_size_sections): Handle PT_GNU_STACK and __stacksize.
        (sh_elf_modify_program_headers): New.
        (sh_elf_size_dynamic_sections): Allocate function descriptors for
        local symbols.  Allocate .got.funcdesc contents.  Allocate rofixups.
        Handle local GOT entries of type GOT_FUNCDESC.  Create fixups for
        local GOT entries.  Ensure that FDPIC libraries always have a PLTGOT
        entry in the .dynamic section.
        (sh_elf_add_dyn_reloc, sh_elf_got_offset, sh_elf_initialize_funcdesc)
        (sh_elf_add_rofixup, sh_elf_osec_to_segment)
        (sh_elf_osec_readonly_p, install_movi20_field): New functions.
        (sh_elf_relocate_section): Handle new relocations, R_SH_FUNCDESC,
        R_SH_GOTFUNCDESC and R_SH_GOTOFFFUNCDESC.  Use sh_elf_got_offset
        and .got.plt throughout to find _GLOBAL_OFFSET_TABLE_.  Add rofixup
        read-only section warnings.  Handle undefined weak symbols.  Generate
        fixups for R_SH_DIR32 and GOT entries.  Check for cross-segment
        relocations and clear EF_SH_PIC.  Handle 20-bit relocations.
        Always generate R_SH_DIR32 for FDPIC instead of R_SH_RELATIVE.
        (sh_elf_gc_sweep_hook): Handle R_SH_FUNCDESC, R_SH_GOTOFF20,
        R_SH_GOTFUNCDESC, R_SH_GOTFUNCDESC20, and R_SH_GOTOFFFUNCDESC.
        Handle 20-bit relocations.
        (sh_elf_copy_indirect_symbol): Copy function descriptor reference
        counts.
        (sh_elf_check_relocs): Handle new relocations.  Make symbols
        dynamic for FDPIC relocs.  Account for rofixups.  Error for FDPIC
        symbol mismatches.  Allocate a GOT for R_SH_DIR32. Allocate fixups
        for R_SH_DIR32.
        (sh_elf_copy_private_data): Copy PT_GNU_STACK size.
        (sh_elf_merge_private_data): Copy initial flags.  Do not clobber
        non-mach flags.  Set EF_SH_PIC for FDPIC.  Reject FDPIC mismatches.
        (sh_elf_finish_dynamic_symbol): Do not handle got_funcdesc entries
        here.  Rename sgot to sgotplt and srel to srelplt.  Handle short_plt,
        FDPIC descriptors, and got20.  Create R_SH_FUNCDESC_VALUE for FDPIC.
        Use install_movi20_field.  Rename srel to srelgot.  Always generate
        R_SH_DIR32 for FDPIC instead of R_SH_RELATIVE.
        (sh_elf_finish_dynamic_sections): Fill in the GOT pointer in rofixup.
        Do not fill in reserved GOT entries for FDPIC.  Correct DT_PLTGOT.
        Rename sgot to sgotplt.  Assert that the right number of rofixups
        and dynamic relocations were allocated.
        (sh_elf_use_relative_eh_frame, sh_elf_encode_eh_address): New.
        (elf_backend_omit_section_dynsym): Use sh_elf_omit_section_dynsym.
        (elf_backend_can_make_relative_eh_frame)
        (elf_backend_can_make_lsda_relative_eh_frame)
        (elf_backend_encode_eh_address): Define.
        (TARGET_BIG_SYM, TARGET_BIG_NAME, TARGET_LITTLE_SYM)
        (TARGET_LITTLE_NAME, elf_backend_modify_program_headers, elf32_bed):
        Redefine for FDPIC vector.
        * reloc.c: Add SH FDPIC and movi20 relocations.
        * targets.c (_bfd_target_vector): Add FDPIC vectors.
        * configure, bfd-in2.h, libbfd.h: Regenerated.

        binutils/
        * readelf.c (get_machine_flags): Handle EF_SH_PIC and EF_SH_FDPIC.

        gas/
        * config/tc-sh.c (sh_fdpic): New.
        (sh_check_fixup): Handle relocations on movi20.
        (parse_exp): Do not reject PIC operators here.
        (build_Mytes): Check for unhandled PIC operators here.  Use
        sh_check_fixup for movi20.
        (enum options): Add OPTION_FDPIC.
        (md_longopts, md_parse_option, md_show_usage): Add --fdpic.
        (sh_fix_adjustable, md_apply_fix): Handle FDPIC and movi20 relocations.
        (sh_elf_final_processing): Handle --fdpic.
        (sh_uclinux_target_format): New.
        (sh_parse_name): Handle FDPIC relocation operators.
        * config/tc-sh.h (TARGET_FORMAT): Define specially for TE_UCLINUX.
        (sh_uclinux_target_format): Declare for TE_UCLINUX.
        * configure.tgt (sh-*-uclinux* | sh[12]-*-uclinux*): Set
        em=uclinux.
        * doc/c-sh.texi (SH Options): Document --fdpic.

        gas/testsuite/
        * gas/sh/basic.exp: Run new tests.  Handle uClinux like Linux.
        * gas/sh/fdpic.d: New file.
        * gas/sh/fdpic.s: New file.
        * gas/sh/reg-prefix.d: Force big-endian.
        * gas/sh/sh2a-pic.d: New file.
        * gas/sh/sh2a-pic.s: New file.
        * lib/gas-defs.exp (is_elf_format): Include sh*-*-uclinux*.

        include/elf/
        * sh.h (EF_SH_PIC, EF_SH_FDPIC): Define.
        (R_SH_FIRST_INVALID_RELOC_6, R_SH_LAST_INVALID_RELOC_6): New.  Adjust
        other invalid ranges.
        (R_SH_GOT20, R_SH_GOTOFF20, R_SH_GOTFUNCDESC, R_SH_GOTFUNCDESC20)
        (R_SH_GOTOFFFUNCDESC, R_SH_GOTOFFFUNCDESC20, R_SH_FUNCDESC)
        (R_SH_FUNCDESC_VALUE): New.

        ld/
        * Makefile.am (ALL_EMULATIONS): Add eshelf_fd.o and eshlelf_fd.o.
        (eshelf_fd.c, eshlelf_fd.c): New rules.
        * Makefile.in: Regenerate.
        * configure.tgt (sh-*-uclinux*): Add shelf_fd and shlelf_fd
        emulations.
        * emulparams/shelf_fd.sh: New file.
        * emulparams/shlelf_fd.sh: New file.
        * emulparams/shlelf_linux.sh: Update comment.

        ld/testsuite/
        * ld-sh/sh.exp: Handle uClinux like Linux.
        * lib/ld-lib.exp (is_elf_format): Include sh*-*-uclinux*.
        * ld-sh/fdpic-funcdesc-shared.d: New file.
        * ld-sh/fdpic-funcdesc-shared.s: New file.
        * ld-sh/fdpic-funcdesc-static.d: New file.
        * ld-sh/fdpic-funcdesc-static.s: New file.
        * ld-sh/fdpic-gotfuncdesc-shared.d: New file.
        * ld-sh/fdpic-gotfuncdesc-shared.s: New file.
        * ld-sh/fdpic-gotfuncdesc-static.d: New file.
        * ld-sh/fdpic-gotfuncdesc-static.s: New file.
        * ld-sh/fdpic-gotfuncdesci20-shared.d: New file.
        * ld-sh/fdpic-gotfuncdesci20-shared.s: New file.
        * ld-sh/fdpic-gotfuncdesci20-static.d: New file.
        * ld-sh/fdpic-gotfuncdesci20-static.s: New file.
        * ld-sh/fdpic-goti20-shared.d: New file.
        * ld-sh/fdpic-goti20-shared.s: New file.
        * ld-sh/fdpic-goti20-static.d: New file.
        * ld-sh/fdpic-goti20-static.s: New file.
        * ld-sh/fdpic-gotofffuncdesc-shared.d: New file.
        * ld-sh/fdpic-gotofffuncdesc-shared.s: New file.
        * ld-sh/fdpic-gotofffuncdesc-static.d: New file.
        * ld-sh/fdpic-gotofffuncdesc-static.s: New file.
        * ld-sh/fdpic-gotofffuncdesci20-shared.d: New file.
        * ld-sh/fdpic-gotofffuncdesci20-shared.s: New file.
        * ld-sh/fdpic-gotofffuncdesci20-static.d: New file.
        * ld-sh/fdpic-gotofffuncdesci20-static.s: New file.
        * ld-sh/fdpic-gotoffi20-shared.d: New file.
        * ld-sh/fdpic-gotoffi20-shared.s: New file.
        * ld-sh/fdpic-gotoffi20-static.d: New file.
        * ld-sh/fdpic-gotoffi20-static.s: New file.
        * ld-sh/fdpic-plt-be.d: New file.
        * ld-sh/fdpic-plt-le.d: New file.
        * ld-sh/fdpic-plt.s: New file.
        * ld-sh/fdpic-plti20-be.d: New file.
        * ld-sh/fdpic-plti20-le.d: New file.
        * ld-sh/fdpic-stack-default.d: New file.
        * ld-sh/fdpic-stack-size.d: New file.
        * ld-sh/fdpic-stack.s: New file.
2010-05-25 14:12:43 +00:00
Tristan Gingold
8b351884bb 2010-04-14 Tristan Gingold <gingold@adacore.com>
* emulparams/alphavms.sh: New file.
	* emultempl/vms.em: New file.
	* scripttempl/alphavms.sc: New file.
	* configure.tgt (alpha*-*-*vms*): Added.
	* Makefile.am (ALL_EMULATIONS): Add ealphavms.o
	(ealphavms.c): New target.
	* Makefile.in: Regenerate.
2010-04-14 09:27:27 +00:00
Joseph Myers
40b365969f bfd:
* Makefile.am (ALL_MACHINES): Add cpu-tic6x.lo.
	(ALL_MACHINES_CFILES): Add cpu-tic6x.c.
	(BFD32_BACKENDS): Add elf32-tic6x.lo.
	(BFD32_BACKENDS_CFILES): Add elf32-tic6x.c.
	* Makefile.in: Regenerate.
	* archures.c (bfd_arch_tic6x, bfd_tic6x_arch): New.
	(bfd_archures_list): Update.
	* config.bfd (tic6x-*-elf): New.
	* configure.in (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec):
	New.
	* configure: Regenerate.
	* cpu-tic6x.c, elf32-tic6x.c: New.
	* reloc.c (BFD_RELOC_C6000_PCR_S21, BFD_RELOC_C6000_PCR_S12,
	BFD_RELOC_C6000_PCR_S10, BFD_RELOC_C6000_PCR_S7,
	BFD_RELOC_C6000_ABS_S16, BFD_RELOC_C6000_ABS_L16,
	BFD_RELOC_C6000_ABS_H16, BFD_RELOC_C6000_SBR_U15_B,
	BFD_RELOC_C6000_SBR_U15_H, BFD_RELOC_C6000_SBR_U15_W,
	BFD_RELOC_C6000_SBR_S16, BFD_RELOC_C6000_SBR_L16_B,
	BFD_RELOC_C6000_SBR_L16_H, BFD_RELOC_C6000_SBR_L16_W,
	BFD_RELOC_C6000_SBR_H16_B, BFD_RELOC_C6000_SBR_H16_H,
	BFD_RELOC_C6000_SBR_H16_W, BFD_RELOC_C6000_SBR_GOT_U15_W,
	BFD_RELOC_C6000_SBR_GOT_L16_W, BFD_RELOC_C6000_SBR_GOT_H16_W,
	BFD_RELOC_C6000_DSBT_INDEX, BFD_RELOC_C6000_PREL31,
	BFD_RELOC_C6000_COPY, BFD_RELOC_C6000_ALIGN,
	BFD_RELOC_C6000_FPHEAD, BFD_RELOC_C6000_NOCMP): New.
	* targets.c (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec): New.
	(_bfd_target_vector): Update.
	* bfd-in2.h, libbfd.h: Regenerate.

binutils:
	* MAINTAINERS: Add self as TI C6X maintainer.
	* NEWS: Add news entry for TI C6X support.
	* readelf.c: Include elf/tic6x.h.
	(guess_is_rela): Handle EM_TI_C6000.
	(dump_relocations): Likewise.
	(get_tic6x_dynamic_type): New.
	(get_dynamic_type): Call it.
	(get_machine_flags): Handle EF_C6000_REL.
	(get_osabi_name): Handle machine-specific values only for relevant
	machines.  Handle C6X values.
	(get_tic6x_segment_type): New.
	(get_segment_type): Call it.
	(get_tic6x_section_type_name): New.
	(get_section_type_name): Call it.
	(is_32bit_abs_reloc, is_16bit_abs_reloc, is_none_reloc): Handle
	EM_TI_C6000.

gas:
	* Makefile.am (TARGET_CPU_CFILES): Add config/tc-tic6x.c.
	(TARGET_CPU_HFILES): Add config/tc-tic6x.h.
	* Makefile.in: Regenerate.
	* NEWS: Add news entry for TI C6X support.
	* app.c (do_scrub_chars): Handle "||^" for TI C6X.  Handle
	TC_PREDICATE_START_CHAR and TC_PREDICATE_END_CHAR.  Keep spaces in
	operands if TC_KEEP_OPERAND_SPACES.
	* configure.tgt (tic6x-*-*): New.
	* config/tc-ia64.h (TC_PREDICATE_START_CHAR,
	TC_PREDICATE_END_CHAR): Define.
	* config/tc-tic6x.c, config/tc-tic6x.h: New.
	* doc/Makefile.am (CPU_DOCS): Add c-tic6x.texi.
	* doc/Makefile.in: Regenerate.
	* doc/all.texi (TIC6X): Define.
	* doc/as.texinfo: Add TI C6X documentation.  Include c-tic6x.texi.
	* doc/c-tic6x.texi: New.

gas/testsuite:
	* gas/tic6x: New directory and testcases.

include:
	* dis-asm.h (print_insn_tic6x): Declare.

include/elf:
	* common.h (ELFOSABI_C6000_ELFABI, ELFOSABI_C6000_LINUX): Define.
	* tic6x.h: New.

include/opcode:
	* tic6x-control-registers.h, tic6x-insn-formats.h,
	tic6x-opcode-table.h, tic6x.h: New.

ld:
	* Makefile.am (ALL_EMULATIONS): Add eelf32_tic6x_be.o and
	eelf32_tic6x_le.o.
	(eelf32_tic6x_be.c, eelf32_tic6x_le.c): New.
	* NEWS: Add news entry for TI C6X support.
	* configure.tgt (tic6x-*-*): New.
	* emulparams/elf32_tic6x_be.sh, emulparams/elf32_tic6x_le.sh: New.

ld/testsuite:
	* ld-elf/flags1.d, ld-elf/merge.d: XFAIL for tic6x-*-*.
	* ld-elf/sec-to-seg.exp: Set B_test_same_seg to 0 for tic6x-*-*.
	* ld-tic6x: New directory and testcases.

opcodes:
	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add tic6x-dis.c.
	* Makefile.in: Regenerate.
	* configure.in (bfd_tic6x_arch): New.
	* configure: Regenerate.
	* disassemble.c (ARCH_tic6x): Define if ARCH_all.
	(disassembler): Handle TI C6X.
	* tic6x-dis.c: New.
2010-03-25 21:12:36 +00:00
Rainer Orth
a6cc6b3bc4 ld:
* Makefile.am (ALL_EMULATIONS): Add eelf32_sparc_sol2.o,
	eelf_i386_sol2.o.
	(ALL_64_EMULATIONS): Add eelf_x86_64_sol2.o, eelf64_sparc_sol2.o.
	(eelf32_sparc_sol2.c): New rule.
	(eelf64_sparc_sol2.c): Likewise.
	(eelf_x86_64_sol2.c): Likewise.
	(eelf_i386_sol2.c): Likewise.
	* Makefile.in: Regenerate.
	* configure.tgt (i[3-7]86-*-solaris2*): Change targ_emul to
	elf_i386_sol2.
	Add elf_i386_ldso, elf_x86_64_sol2 to targ_extra_emuls.
	(x86_64-*-solaris2*): Change targ_emul to elf_x86_64_sol2.
	Add elf_x86_64, elf_i386_sol2, elf_i386 to targ_extra_emuls.
	(sparc-*-solaris2.[0-6]*): Change targ_emul to elf32_sparc_sol2.
	Add target_extra_emuls.
	(sparc-*-solaris2*): Change targ_emul to elf32_sparc_sol2.
	Add elf32_sparc, elf64_sparc_sol2 to targ_extra_emuls.
	(sparcv9-*-solaris2*): Change targ_emul to elf64_sparc_sol2.
	Add elf64_sparc, elf32_sparc_sol2 to target_extra_emuls.
	* emulparams/elf32_sparc_sol2.sh: New file.
	* emulparams/elf64_sparc_sol2.sh: New file.
	* emulparams/elf_i386_sol2.sh: New file.
	* emulparams/elf_x86_64_sol2.sh: New file.
	* emultempl/solaris2.em: New file.

	bfd:
	* elflink.c (bfd_elf_size_dynamic_sections): Don't emit base
	version twice.
	Skip it when constructing def.vd_next.

	* elf32-i386.c (TARGET_LITTLE_SYM): Redefine to
	bfd_elf32_i386_sol2_vec.
	(TARGET_LITTLE_NAME): Redefine to elf32-i386-sol2.
	(elf32_bed): Redefine to elf32_i386_sol2_bed.
	(elf_backend_want_plt_sym): Redefine to 1.

	* elf64-x86-64.c (TARGET_LITTLE_SYM): Redefine to
	bfd_elf64_x86_64_sol2_vec.
	(TARGET_LITTLE_NAME): Redefine to elf64-x86-64-sol2.
	(elf64_bed): Redefine to elf64_x86_64_sol2_bed.
	(elf_backend_want_plt_sym): Redefine to 1.

	* config.bfd (i[3-7]86-*-solaris2*): Set targ_defvec to
	bfd_elf32_i386_sol2_vec.
	Replace bfd_elf64_x86_64_vec by bfd_elf64_x86_64_sol2_vec in
	targ64_selvecs.
	(x86_64-*-solaris2*): Set targ_defvec to bfd_elf32_i386_sol2_vec.
	Replace bfd_elf64_x86_64_vec by bfd_elf64_x86_64_sol2_vec in
	targ_selvecs.

	* configure.in: Handle bfd_elf32_i386_sol2_vec,
	bfd_elf64_x86_64_sol2_vec.
	* configure: Regenerate.

	* targets.c (bfd_elf32_i386_sol2_vec): Declare.
	(bfd_elf64_x86_64_sol2_vec): Declare.
	(_bfd_target_vector): Add bfd_elf32_i386_sol2_vec,
	bfd_elf64_x86_64_sol2_vec.
2010-03-05 19:49:00 +00:00
Nick Clifton
c7927a3c0e bfd
* Makefile.am (ALL_MACHINES): Add cpu-rx.lo.
        (ALL_MACHINES_CFILES): Add cpu-rx.c.
        (BFD32_BACKENDS): Add elf32-rx.lo.
        (BFD32_BACKENDS_CFILES): Add elf32-rx.c.
        * archures.c (bfd_architecture): Add bfd_arch_rx and bfd_mach_rx.
        Export bfd_rx_arch.
        (bfd_archures_list): Add bfd_rx_arch.
        * config.bfd: Add entry for rx-*-elf.
        * configure.in: Add entries for bfd_elf32_rx_le_vec and
        bfd_elf32_rx_be_vec.
        * reloc.c: Add RX relocations.
        * targets.c: Add RX target vectors.
        * Makefile.in: Regenerate.
        * bfd-in2.h: Regenerate.
        * configure: Regenerate.
        * libbfd.h: Regenerate.
        * cpu-rx.c: New file.
        * elf32-rx.c: New file.

binutils
        * readelf.c: Add support for RX target.
        * MAINTAINERS: Add DJ and NickC as maintainers for RX.

gas
        * Makefile.am: Add RX target.
        * configure.in: Likewise.
        * configure.tgt: Likewise.
        * read.c (do_repeat_with_expander): New function.
        * read.h: Provide a prototype for do_repeat_with_expander.
        * doc/Makefile.am: Add RX target documentation.
        * doc/all.texi: Likewise.
        * doc/as.texinfo: Likewise.
        * Makefile.in: Regenerate.
        * NEWS: Mention support for RX architecture.
        * configure: Regenerate.
        * doc/Makefile.in: Regenerate.
        * config/rx-defs.h: New file.
        * config/rx-parse.y: New file.
        * config/tc-rx.h: New file.
        * config/tc-rx.c: New file.
        * doc/c-rx.texi: New file.

gas/testsuite
        * gas/rx: New directory.
        * gas/rx/*: New set of test cases.
        * gas/elf/section2.e-rx: New expected output file.
        * gas/all/gas.exp: Add support for RX target.
        * gas/elf/elf.exp: Likewise.
        * gas/lns/lns.exp: Likewise.
        * gas/macros/macros.exp: Likewise.

include
        * dis-asm.h: Add prototype for print_insn_rx.

include/elf
        * rx.h: New file.

include/opcode
        * rx.h: New file.

ld
        * Makefile.am: Add rules to build RX emulation.
        * configure.tgt: Likewise.
        * NEWS: Mention support for RX architecture.
        * Makefile.in: Regenerate.
        * emulparams/elf32rx.sh: New file.
        * emultempl/rxelf.em: New file.

opcodes
        * Makefile.am: Add RX files.
        * configure.in: Add support for RX target.
        * disassemble.c: Likewise.
        * Makefile.in: Regenerate.
        * configure: Regenerate.
        * opc2c.c: New file.
        * rx-decode.c: New file.
        * rx-decode.opc: New file.
        * rx-dis.c: New file.
2009-09-29 14:17:19 +00:00
Nick Clifton
7ba29e2a41 Add support for Xilinx MicroBlaze processor.
* bfd/Makefile.am: Add cpu-microblaze.{lo,c}, elf32-microblaze.{lo,c}.
        * bfd/Makefile.in: Same.
        * bfd/archures.c: Add bfd_arch_microblaze.
        * bfd/bfd-in2.h: Regenerate.
        * bfd/config.bfd: Add microblaze target.
        * bfd/configure: Add bfd_elf32_microblaze_vec target.
        * bfd/configure.in: Same.
        * bfd/cpu-microblaze.c: New.
        * bfd/elf32-microblaze.c: New.
        * bfd/libbfd-in.h: Add prototype _bfd_dwarf2_fixup_section_debug_loc().
        * bfd/libbfd.h: Regenerate.
        * bfd/reloc.c: Add MICROBLAZE relocations.
        * bfd/section.c: Add struct relax_table and relax_count to section.
        * bfd/targets.c: Add bfd_elf32_microblaze_vec.
        * binutils/MAINTAINERS: Add self as maintainer.
        * binutils/readelf.c: Include elf/microblaze.h, add EM_MICROBLAZE &
        EM_MICROBLAZE_OLD to guess_is_rela(), dump_relocations(),
        get_machine_name().
        * config.sub: Add microblaze target.
        * configure: Same.
        * configure.ac: Same.
        * gas/Makefile.am: add microblaze to CPU_TYPES, config/tc-microblaze.c to
        TARGET_CPU_CFILES, config/tc-microblaze.h to TARGET_CPU_HFILES, add
        DEP_microblaze_elf target.
        * gas/Makefile.in: Same.
        * gas/config/tc-microblaze.c: Add MicroBlaze assembler.
        * gas/config/tc-microblaze.h: Add header for tc-microblaze.c.
        * gas/configure: Add microblaze target.
        * gas/configure.in: Same.
        * gas/configure.tgt: Same.
        * gas/doc/Makefile.am: Add c-microblaze.texi to CPU_DOCS.
        * gas/doc/Makefile.in: Same.
        * gas/doc/all.texi: Set MICROBLAZE.
        * gas/doc/as.texinfo: Add MicroBlaze doc links.
        * gas/doc/c-microblaze.texi: New MicroBlaze docs.
        * include/dis-asm.h: Decl print_insn_microblaze().
        * include/elf/common.h: Define EM_MICROBLAZE & EM_MICROBLAZE_OLD.
        * include/elf/microblaze.h: New reloc definitions.
        * ld/Makefile.am: Add eelf32mb_linux.o, eelf32microblaze.o to
        ALL_EMULATIONS, targets.
        * ld/Makefile.in: Same.
        * ld/configure.tgt: Add microblaze*-linux*, microblaze* targets.
        * ld/emulparams/elf32mb_linux.sh: New.
        * ld/emulparams/elf32microblaze.sh. New.
        * ld/scripttempl/elfmicroblaze.sc: New.
        * opcodes/Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
        CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
        * opcodes/Makefile.in: Same.
        * opcodes/configure: Add bfd_microblaze_arch target.
        * opcodes/configure.in: Same.
        * opcodes/disassemble.c: Define ARCH_microblaze, return
        print_insn_microblaze().
        * opcodes/microblaze-dis.c: New MicroBlaze disassembler.
        * opcodes/microblaze-opc.h: New MicroBlaze opcode definitions.
        * opcodes/microblaze-opcm.h: New MicroBlaze opcode types.
2009-08-06 17:38:04 +00:00
H.J. Lu
8a9036a406 bfd/
2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>

	* archures.c (bfd_architecture): Add bfd_arch_l1om.
	(bfd_l1om_arch): New.
	(bfd_archures_list): Add &bfd_l1om_arch.
	* bfd-in2.h: Regenerated.

	* config.bfd (targ64_selvecs): Add bfd_elf64_l1om_vec if
	bfd_elf64_x86_64_vec is supported.  Add bfd_elf64_l1om_freebsd_vec
	if bfd_elf64_x86_64_freebsd_vec is supported.
	(targ_selvecs): Likewise.

	* configure.in: Support bfd_elf64_l1om_vec and
	bfd_elf64_l1om_freebsd_vec.
	* configure: Regenerated.

	* cpu-l1om.c: New.

	* elf64-x86-64.c (elf64_l1om_elf_object_p): New.
	(bfd_elf64_l1om_vec): Likewise.
	(bfd_elf64_l1om_freebsd_vec): Likewise.

	* Makefile.am (ALL_MACHINES): Add cpu-l1om.lo.
	(ALL_MACHINES_CFILES): Add cpu-l1om.c.
	* Makefile.in: Regenerated.

	* targets.c (bfd_elf64_l1om_vec): New.
	(bfd_elf64_l1om_freebsd_vec): Likewise.
	(_bfd_target_vector): Add bfd_elf64_l1om_vec and
	bfd_elf64_l1om_freebsd_vec.

binutils/

2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>

	* readelf.c (guess_is_rela): Handle EM_L1OM.
	(dump_relocations): Likewise.
	(get_machine_name): Likewise.
	(get_section_type_name): Likewise.
	(get_elf_section_flags): Likewise.
	(get_symbol_index_type): Likewise.
	(is_32bit_abs_reloc): Likewise.
	(is_32bit_pcrel_reloc): Likewise.
	(is_64bit_abs_reloc): Likewise.
	(is_64bit_pcrel_reloc): Likewise.
	(is_none_reloc): Likewise.

gas/

2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (cpu_arch): Add l1om.
	(check_cpu_arch_compatible): New.
	(set_cpu_arch): Use it.
	(i386_arch): New.
	(i386_mach): Return bfd_mach_l1om for Intel L1OM.
	(md_show_usage): Display l1om.
	(i386_target_format): Return ELF_TARGET_L1OM_FORMAT if
	cpu_arch_isa_flags.bitfield.cpul1om is set.

	* config/tc-i386.h (TARGET_ARCH): Use (i386_arch ()).
	(i386_arch): New.
	(ELF_TARGET_L1OM_FORMAT): Likewise.

	* doc/c-i386.texi: Document l1om.

gas/testsuite/

2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/i386/l1om.d: New.
	* gas/i386/l1om-inval.l: Likewise.
	* gas/i386/l1om-inval.s: Likewise.

	* gas/i386/i386.exp: Run l1om-inval and l1om.

include/elf/

2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>

	* common.h (EM_L1OM): New.

ld/

2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>

	* configure.tgt (targ64_extra_emuls): Add elf_l1om if elf_x86_64
	is supported.  Add elf_l1om_fbsd if elf_x86_64_fbsd is supported.
	(targ_extra_emuls): Likewise.

	* Makefile.am (ALL_64_EMULATIONS): Add eelf_l1om.o and
	eelf_l1om_fbsd.o
	(eelf_l1om.c): New.
	(eelf_l1om_fbsd.c): Likewise.
	* Makefile.in: Regenerated.

	* emulparams/elf_l1om.sh: New.
	* emulparams/elf_l1om_fbsd.sh: Likewise.

ld/testsuite/

2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>

	* ld-x86-64/abs-l1om.d: New.
	* ld-x86-64/protected2-l1om.d: Likewise.
	* ld-x86-64/protected3-l1om.d: Likewise.

	* ld-x86-64/x86-64.exp: Run abs-l1om, protected2-l1om and
	protected3-l1om.

opcodes/

2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>

	* configure.in: Handle bfd_l1om_arch.
	* disassemble.c (disassembler): Likewise.

	* configure: Regenerated.

	* i386-dis.c (print_insn): Handle bfd_mach_l1om and
	bfd_mach_l1om_intel_syntax.  Use 8 bytes per line for Intel L1OM.

	* i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
	Add CPU_L1OM_FLAGS.
	(cpu_flags): Add CpuL1OM.
	(set_bitfield): Take an argument to set the value field.
	(process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
	(process_i386_opcode_modifier): Updated.
	(process_i386_operand_type): Likewise.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

	* i386-opc.h (CpuL1OM): New.
	(CpuXsave): Updated.
	(i386_cpu_flags): Add cpul1om.
2009-07-25 14:58:58 +00:00
Dave Korn
361dff7384 2009-06-18 Dave Korn <dave.korn.cygwin@gmail.com>
Merge cegcc and mingw32ce target name changes from CeGCC project,
replacing "arm-*-" by "arm*-*-" where needed.

  2008-09-24  Pedro Alves  <pedroalves@users.sourceforge.net>

	ld/
	* configure.tgt (arm*-*-cegcc*): Set LIB_PATH to
	${tooldir}/lib/w32api.

  2007-12-25  Pedro Alves  <pedro_alves@portugalmail.pt>

	bfd/
	* config.bfd: Add arm*-*-cegcc* target.

  2007-12-25  Pedro Alves  <pedro_alves@portugalmail.pt>

	binutils/
	* configure.in: Add arm*-*-cegcc* and arm*-*-mingw32ce* targets.
	* configure: Regenerate.

  2007-12-25  Pedro Alves  <pedro_alves@portugalmail.pt>

	gas/
	* configure.tgt: Add arm*-*-cegcc* target.

  2007-12-25  Pedro Alves  <pedro_alves@portugalmail.pt>

	ld/
	* configure.tgt: Add arm*-*-cegcc* target.

  2007-12-17  Pedro Alves  <pedro_alves@portugalmail.pt>

	bfd/
	* config.bfd: Add arm-*-mingw32ce* target.

  2007-12-17  Pedro Alves  <pedro_alves@portugalmail.pt>

	gas/
	* configure.tgt: Add arm-*-mingw32ce* target.

  2007-12-17  Pedro Alves  <pedro_alves@portugalmail.pt>

	ld/
	* configure.tgt: Add arm-*-mingw32ce* target.
2009-06-18 02:11:03 +00:00
Nick Clifton
20135e4cea Add new binutils target: moxie 2009-04-16 15:39:48 +00:00
Richard Sandiford
e52315924b bfd/
* config.bfd: Treat AIX 6+ in the same way as AIX 5.
	* configure.in: Likewise.
	* configure: Regenerate.

binutils/
	* configure.tgt: Extend AIX 5 behavior to AIX 6 and above.
	* configure.in: Likewise.
	* configure: Regenerate.

gas/
	* configure.tgt: Extend AIX 5 behavior to AIX 6 and above.
	* configure.in: Likewise.
	* configure: Regenerate.

ld/
	* configure.tgt: Extend AIX 5 behavior to AIX 6 and above.
2009-03-14 09:11:38 +00:00
Nick Clifton
c3b7224ae4 Add support for Score7 architecture. 2009-03-02 10:33:08 +00:00
Dave Anglin
d1bbb13a63 * configure.tgt: Only use elf64hppa target emulation for hpux.
* emulparams/elf64hppa.sh: Don't include hppa64linux.sh.
	(SCRIPT_NAME): Use new script elf64hppa.
	(SCRIPT_NAME, ELFSIZE, NO_REL_RELOCS, ARCH, MACHINE, ENTRY,
	TEMPLATE_NAME, GENERATE_SHLIB_SCRIPT, OTHER_READONLY_SECTIONS,
	OTHER_READWRITE_SECTIONS, OTHER_BSS_SECTIONS, OTHER_GOT_RELOC_SECTIONS,
	DATA_START_SYMBOLS, OTHER_SYMBOLS, DATA_PLT, PLT_BEFORE_GOT,
	TEXT_DYNAMIC): Define.
	* emulparams/hppa64linux.sh: Adjust comments.
	* scripttempl/elf64hppa.sc: New file.
2009-03-01 22:10:36 +00:00
Nick Clifton
84e94c9023 Add LM32 port. 2008-12-23 19:10:25 +00:00
Ulrich Weigand
d7b99e76e2 * configure.tgt [spu-*-elf*]: Set NATIVE_LIB_DIRS to '/lib'. 2008-11-17 20:11:48 +00:00
Nick Clifton
8a2a2dbb65 Add m32c-*-rtems* and m32r-*-rtems* configuration targets. 2008-11-06 15:36:38 +00:00
Eric B. Weddington
7b21ac3f45 Add AVR architectures avr25, avr31, avr35, and avr51 to match GCC.
bfd/
	* archures.c (bfd_mach_avr25, bfd_mach_avr31, bfd_mach_avr35,
	bfd_mach_avr51): New.
	* bfd-in2.h: Regenerate.
	* cpu-avr.c (arch_info_struct): Add avr25, avr31, avr35, and avr51
	architectures. Change comments to match architecture comments in GCC.
	(compatible): Add test for new AVR architectures.
	* elf32-avr.c (bfd_elf_avr_final_write_processing): Recognize
	bfd_mach_avr25, bfd_mach_avr31, bfd_mach_avr35 and bfd_mach_avr51.
	(elf32_avr_object_p): Recognize E_AVR_MACH_AVR25, E_AVR_MACH_AVR31,
	E_AVR_MACH_AVR35 and E_AVR_MACH_AVR51.

gas/
	* config/tc-avr.c (mcu_types): Add avr25, avr31, avr35, and avr51
	architectures. Reorganize list to put mcu types in correct architectures
	and to order list same as in GCC. Use new ISA definitions in
	include/opcode/avr.h.
	* doc/c-avr.texi: Add avr25, avr31, avr35, and avr51 architecture
	descriptions. Reorganize descriptions to put mcu types in correct
	architectures and to order lists same as in GCC.

include/
	* elf/avr.h (E_AVR_MACH_AVR25, E_AVR_MACH_AVR31,
	E_AVR_MACH_AVR35, E_AVR_MACH_AVR51): Define.
	(EF_AVR_MACH): Redefine to 0x7F.
	* opcode/avr.h (AVR_ISA_TINY3, AVR_ISA_ALL, AVR_ISA_USB162): Remove.
	(AVR_ISA_AVR3): Redefine.
	(AVR_ISA_AVR1, AVR_ISA_AVR2, AVR_ISA_AVR31, AVR_ISA_AVR35,
	AVR_ISA_AVR3_ALL, AVR_ISA_AVR4, AVR_ISA_AVR5, AVR_ISA_AVR51,
	AVR_ISA_AVR6): Define.

ld/
	* Makefile.am (ALL_EMULATIONS): Add eavr25.o, eavr31.o, eavr35.o,
	and eavr51.o.
	Add rules for eavr25.c, eavr31.c, eavr35.c, eavr51.c.
	* Makefile.in: Regenerate.
	* configure.tgt (avr-*-*, targ_extra_emuls): Add avr25, avr31, avr35
	and avr51.
	* emulparams/avr25.sh: New file.
	* emulparams/avr31.sh: New file.
	* emulparams/avr35.sh: New file.
	* emulparams/avr51.sh: New file.
2008-08-09 05:35:13 +00:00
Mike Frysinger
bec9537ec1 2008-04-25 Michael Frysinger <vapier@gentoo.org>
* configure.tgt (bfin-*-linux-uclibc*): Set targ_emul to elf32bfinfd
	and targ_extra_emuls to elf32bfin.
2008-04-26 01:10:55 +00:00
Bob Wilson
f8a52b5923 2008-01-31 Marc Gauthier <marc@tensilica.com>
bfd/
	* config.bfd (xtensa*-*-*): Recognize processor variants.
gas/
	* configure.tgt (xtensa*-*-*): Recognize processor variants.
gas/testsuite/
	* gas/all/gas.exp: Recognize Xtensa processor variants.
	* gas/elf/elf.exp: Likewise.
	* gas/lns/lns.exp: Likewise.
ld/
	* configure.tgt (xtensa*-*-*): Recognize processor variants.
ld/testsuite/
	* ld-elf/merge.d: Recognize Xtensa processor variants.
	* ld-xtensa/coalesce.exp: Likewise.
	* ld-xtensa/lcall.exp: Likewise.
2008-02-01 17:58:48 +00:00
Nick Clifton
00b2bfc124 * config.bfd (x86_64-*-solaris2): Add support for this target.
* configure.tgt (x86_64-*-solaris2): Add support for this target.
2008-01-28 16:57:22 +00:00
Nick Clifton
bfff164249 Add MN10300 linker relaxation support for symbol differences 2007-10-19 17:31:31 +00:00
Nick Clifton
0b3e17e93d Add support for i386-dragonfly target. 2007-08-28 11:02:55 +00:00
Nick Clifton
c2c09cab6c * configure.tgt: Add bfin-*rtems*. 2007-08-07 09:32:06 +00:00
Nick Clifton
3d3d428f04 New port: National Semiconductor's CR16 2007-06-29 14:09:34 +00:00
Paul Brook
9fcfe2ed35 2007-04-04 Paul Brook <paul@codesourcery.com>
ld/
	* configure.tgt: Loosen checks for arm uclinux eabi targets.
	gas/
	* configure.tgt: Loosen checks for arm uclinux eabi targets.
2007-04-04 18:02:39 +00:00
Bernd Schmidt
3f2dad243c * configure.tgt (bfin-*-elf, bfin-*-uclinux*): Add targ_extra_libpath.
(bfin-*-linux-uclibc*): New target.
2007-03-19 17:31:31 +00:00
Nathan Sidwell
ed6ba29825 bfd/
* config.bfd (sh-*-uclinux, sh[12]-*-uclinux): New stanza.

	gas/
	* configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.

	ld/
	* Makefile.am (ALL_EMULATIONS): Add eshelf_uclinux.o
	(eshelf_uclinux.c): New target.
	* Makefile.in: Rebuilt.
	* configure.tgt (sh-*-uclinux* | sh[12]-*-uclinux*): New stanza.
	* emulparams/shelf_uclinux.sh: New.
2007-02-28 10:53:19 +00:00
Alan Modra
46c3c2015b * configure.tgt: Fix type last change. 2007-02-28 01:39:59 +00:00
Alan Modra
37dc280a2e * configure.tgt (spu-*-elf*): Delete targ_extra_ofiles. 2007-02-28 01:29:58 +00:00
Joseph Myers
919e35ed89 * configure.tgt (mips64*el-*-linux-*, mips64*-*-linux-*,
mips*el-*-linux-*, mips*-*-linux-*): Set
	targ_extra_libpath=$targ_extra_emuls.
2007-02-22 15:05:42 +00:00
H.J. Lu
534d31192c 2007-02-09 H.J. Lu <hongjiu.lu@intel.com>
* configure.in (targ_extra_emuls): Add $targ64_extra_emuls if
	want64 is true.
	(targ_extra_libpath): Add $targ64_extra_libpath if want64 is
	true
	* configure: Regenerated.

	* configure.tgt (targ_extra_libpath): Initialize.
	(targ64_extra_emuls): New. Document. Initialize.
	(targ64_extra_libpath): Likewise.
	(i[3-7]86-*-linux-*): Set targ64_extra_emuls and
	targ64_extra_libpath.
	(powerpc*-*-linux*): Likewise.
	(s390-*-linux*): Likewise.
2007-02-09 18:20:24 +00:00
Paul Brook
7bd1c9613d 2007-02-07 Paul Brook <paul@codesourcery.com>
ld/
	* configure.tgt: Add arm*-*-uclinux-*eabi.
	gas/
	* configure.tgt: Ditto.
2007-02-07 17:06:20 +00:00
Dave Brolley
19d9b7d3f8 Support for Toshiba MeP. 2007-02-05 20:16:32 +00:00
Nick Clifton
42037fe5bb Renamed target x86_64-*-mingw64 to x86_64-*-mingw*. 2007-01-08 17:21:50 +00:00
Nick Clifton
916c46cb42 PR ld/3843
* configure.tgt (x86_64_[k]freebsd*): Add targ_extra_libpath and tdir_elf_i386_fbsd.
2007-01-08 15:38:59 +00:00
Kazu Hirata
ebff6cd5e5 bfd/
* config.bfd: Recognize fido.

gas/
	* configure.tgt: Recognize fido.

ld/
	* configure.tgt: Recognize fido.
2006-12-24 02:48:59 +00:00
Ben Elliston
a6c73b34d0 * configure.tgt (NATIVE_LIB_DIRS): Specify for spu-*-elf*. 2006-12-15 05:49:28 +00:00
Joseph Myers
fffbd2ef6b 2006-10-26 Joseph S. Myers <joseph@codesourcery.com>
Mark Mitchell  <mark@codesourcery.com>

	* configure.tgt (arm*linux*): Support both big- and little-endian.
2006-10-26 12:52:39 +00:00
Alan Modra
e9f5312993 New Cell SPU port. 2006-10-25 06:49:21 +00:00
Joseph Myers
e4818e07f3 * configure.tgt (i[3-7]86-*-linux-*): Also define
targ_extra_libpath in want64 case.
	* emulparams/elf_x86_64.sh: Handle i[3-7]86-*-linux-* the same as
	x86_64*-linux*.
2006-10-18 16:24:01 +00:00
Nick Clifton
99ad839030 Add x86_64-mingw64 target 2006-09-20 11:35:11 +00:00
Thiemo Seufer
6f69307352 * configure.tgt: Add mips*el-sde-elf* and mips*-sde-elf*
configurations.
2006-09-18 13:18:44 +00:00
Nick Clifton
1c0d3aa6ae Add support for Score target. 2006-09-16 23:51:50 +00:00
Nick Clifton
57da97f58c * configure.tgt: Set targ_emul to arm_wince_pe for ARM Windows CE targets. 2006-08-22 11:50:33 +00:00
Richard Sandiford
55e6e39790 bfd/
2006-08-02  Richard Sandiford  <richard@codesourcery.com>
	    Kazu Hirata  <kazu@codesourcery.com>
	    Phil Edwards  <phil@codesourcery.com>
	    Nathan Sidwell  <nathan@codesourcery.com>

	* config.bfd (sh-*-vxworks): Use bfd_elf32_shvxworks_vec and
	bfd_elf32_shlvxworks_vec.
	* configure.in (bfd_elf32_sh64_vec): Add elf-vxworks.lo.
	(bfd_elf32_sh64l_vec, bfd_elf32_sh64lin_vec): Likewise.
	(bfd_elf32_sh64blin_vec, bfd_elf32_sh64lnbsd_vec): Likewise.
	(bfd_elf32_sh64nbsd_vec, bfd_elf32_sh_vec): Likewise.
	(bfd_elf32_shblin_vec, bfd_elf32_shl_vec): Likewise.
	(bfd_elf32_shl_symbian_vec, bfd_elf32_shlin_vec): Likewise.
	(bfd_elf32_shlnbsd_vec, bfd_elf32_shnbsd_vec): Likewise.
	(bfd_elf32_shlvxworks_vec, bfd_elf32_shvxworks_vec): New stanzas.
	* configure: Regenerate.
	* Makefile.am: Regenerate dependencies.
	* Makefile.in: Regenerate.
	* elf-vxworks.c (elf_vxworks_gott_symbol_p): New function.
	(elf_vxworks_add_symbol_hook): Use it.
	(elf_vxworks_link_output_symbol_hook): Likewise.  Use the hash
	table entry to check for weak undefined symbols and to obtain
	the original bfd.
	(elf_vxworks_emit_relocs): Use target_index instead of this_idx.
	* elf32-sh-relocs.h: New file, split from elf32-sh.c.
	(R_SH_DIR32): Use SH_PARTIAL32 for the partial_inplace field,
	SH_SRC_MASK32 for the src_mask field, and SH_ELF_RELOC for the
	special_function field.
	(R_SH_REL32): Use SH_PARTIAL32 and SH_SRC_MASK32 here too.
	(R_SH_REL32, R_SH_TLS_GD_32, R_SH_TLS_LD_32): Likewise.
	(R_SH_TLS_LDO_32, R_SH_TLS_IE_32, R_SH_TLS_LE_32): Likewise.
	(R_SH_TLS_DTPMOD32, R_SH_TLS_DTPOFF32, R_SH_TLS_TPOFF32): Likewise.
	(R_SH_GOT32, R_SH_PLT32, R_SH_COPY, R_SH_GLOB_DAT): Likewise.
	(R_SH_JMP_SLOT, R_SH_RELATIVE, R_SH_GOTOFF, R_SH_GOTPC): Likewise.
	(SH_PARTIAL32, SH_SRC_MASK32, SH_ELF_RELOC): Undefine at end of file.
	* elf32-sh.c: Include elf32-vxworks.h.
	(MINUS_ONE): Define.
	(sh_elf_howto_table): Include elf32-sh-relocs.h with SH_PARTIAL32
	set to TRUE, SH_SRC_MASK32 set to 0xffffffff, and SH_ELF_RELOC set
	to sh_elf_reloc.
	(sh_vxworks_howto_table): New variable.  Include elf32-sh-relocs.h
	with SH_PARTIAL32 set to FALSE, SH_SRC_MASK32 set to 0, and
	SH_ELF_RELOC set to bfd_elf_generic_reloc.
	(vxworks_object_p, get_howto_table): New functions.
	(sh_elf_reloc_type_lookup): Fix typo.  Use get_howto_table.
	(sh_elf_info_to_howto): Use get_howto_table.
	(sh_elf_relax_section): Honor the partial_inplace field of the
	R_SH_DIR32 howto.
	(sh_elf_relax_delete_bytes): Likewise.
	(elf_sh_plt_info): New structure.
	(PLT_ENTRY_SIZE): Replace both definitions with...
	(ELF_PLT_ENTRY_SIZE): ...this new macro, with separate definitions for
	INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
	(elf_sh_plt0_entry_be): Update sizes of both definitions accordingly.
	(elf_sh_plt0_entry_le): Likewise.
	(elf_sh_plt_entry_be, elf_sh_plt_entry_le): Likewise.
	(elf_sh_pic_plt_entry_be, elf_sh_pic_plt_entry_le): Likewise.
	(elf_sh_plts): New structure, with separate definitions for
	INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
	(elf_sh_plt0_entry): Delete both definitions.
	(elf_sh_plt_entry, elf_sh_pic_plt_entry): Likewise.
	(elf_sh_sizeof_plt, elf_sh_plt_plt0_offset): Likewise.
	(elf_sh_plt_temp_offset, elf_sh_plt_symbol_offset): Likewise.
	(elf_sh_plt_reloc_offset): Likewise.
	(movi_shori_putval): Delete in favor of...
	(install_plt_field): ...this new function, with separate definitions
	for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
	(get_plt_info): New function, with separate definitions
	for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
	(elf_sh_plt0_linker_offset, elf_sh_plt0_gotid_offset): Delete.
	(VXWORKS_PLT_HEADER_SIZE, VXWORKS_PLT_ENTRY_SIZE): New macros.
	(vxworks_sh_plt0_entry_be, vxworks_sh_plt0_entry_le): New constants.
	(vxworks_sh_plt_entry_be, vxworks_sh_plt_entry_le): Likewise.
	(vxworks_sh_pic_plt_entry_be, vxworks_sh_pic_plt_entry_le): Likewise.
	(get_plt_index, get_plt_offset): New functions.
	(elf_sh_link_hash_table): Add srelplt2, plt_info and vxworks_p fields.
	(sh_elf_link_hash_table_create): Initialize them.
	(sh_elf_create_dynamic_sections): Call
	elf_vxworks_create_dynamic_sections for VxWorks.
	(allocate_dynrelocs): Use htab->plt_info to get the size of PLT
	entries.  Allocate relocation entries in .rela.plt.unloaded if
	generating a VxWorks executable.
	(sh_elf_always_size_sections): New function.
	(sh_elf_size_dynamic_sections): Extend .rela.plt handling to
	.rela.plt.unloaded.
	(sh_elf_relocate_section): Use get_howto_table.  Honor
	partial_inplace when calculating the addend for dynamic
	relocations.  Use get_plt_index.
	(sh_elf_finish_dynamic_symbol): Use get_plt_index, install_plt_field
	and htab->plt_info.  Fill in the bra .plt offset for VxWorks
	executables.  Populate .rela.plt.unloaded.  Do not make
	_GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
	(sh_elf_finish_dynamic_sections): Use install_plt_field and
	htab->plt_info.  Handle cases where there is no special PLT header.
	Populate the first relocation in .rela.plt.unloaded and fix up
	the remaining entries.
	(sh_elf_plt_sym_val): Use get_plt_info.
	(elf_backend_always_size_sections): Define.
	(TARGET_BIG_SYM, TARGET_BIG_NAME): Override for VxWorks.
	(TARGET_LITTLE_SYM, TARGET_BIG_SYM): Likewise.
	(elf32_bed, elf_backend_want_plt_sym): Likewise.
	(elf_symbol_leading_char, elf_backend_want_got_underscore): Likewise.
	(elf_backend_grok_prstatus, elf_backend_grok_psinfo): Likewise.
	(elf_backend_add_symbol_hook): Likewise.
	(elf_backend_link_output_symbol_hook): Likewise.
	(elf_backend_emit_relocs): Likewise.
	(elf_backend_final_write_processing): Likewise.
	(ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): Likewise.
	* targets.c (bfd_elf32_shlvxworks_vec): Declare.
	(bfd_elf32_shvxworks_vec): Likewise.
	(_bfd_target_vector): Include bfd_elf32_shlvxworks_vec and
	bfd_elf32_shvxworks_vec.

gas/
	* config/tc-sh.c (apply_full_field_fix): New function.
	(md_apply_fix): Use it instead of md_number_to_chars.  Do not fill
	in fx_addnumber for BFD_RELOC_32_PLT_PCREL.
	(tc_gen_reloc): Use fx_addnumber rather than 0 as the default case.
	* config/tc-sh.h (TARGET_FORMAT): Override for TE_VXWORKS.

ld/
2006-08-02  Richard Sandiford  <richard@codesourcery.com>
	    Kazu Hirata  <kazu@codesourcery.com>
	    Phil Edwards  <phil@codesourcery.com>

	* Makefile.am (ALL_EMULATIONS): Add eshelf_vxworks.o and
	eshlelf_vxworks.o.
	(eshelf_vxworks.c, eshlelf_vxworks.c): New rules.
	* Makefile.in: Regenerate.
	* configure.tgt (sh-*-vxworks): Use shelf_vxworks and
	shlelf_vxworks.
	* emulparams/shelf_vxworks.sh: New file.
	* emulparams/shlelf_vxworks.sh: Likewise.
	* emulparams/vxworks.sh (FINI): Prefix _etext with ${SYMPREFIX}.
	(OTHER_END_SYMBOLS): Likewise _ehdr.
	(DATA_END_SYMBOLS): Likewise _edata.
	* emultempl/vxworks.em (vxworks_after_open): Check whether output_bfd
	is indeed an ELF file before dealing with --force-dynamic.

ld/testsuite/
	* ld-sh/rd-sh.exp: Treat vxworks1-static.d specially.
	* ld-sh/sh-vxworks.exp: New file.
	* ld-sh/sh.exp: Extend sh-linux SIZEOF_HEADERS handling to
	sh-*-vxworks.
	* ld-sh/vxworks1-le.dd, ld-sh/vxworks1-lib-le.dd,
	* ld-sh/vxworks1-lib.dd, ld-sh/vxworks1-lib.nd,
	* ld-sh/vxworks1-lib.rd, ld-sh/vxworks1-lib.s,
	* ld-sh/vxworks1-static.d, ld-sh/vxworks1.dd,
	* ld-sh/vxworks1.ld, ld-sh/vxworks1.rd, ld-sh/vxworks1.s,
	* ld-sh/vxworks2-static.sd, ld-sh/vxworks2.s,
	* ld-sh/vxworks2.sd, ld-sh/vxworks3-le.dd,
	* ld-sh/vxworks3-lib-le.dd, ld-sh/vxworks3-lib.dd,
	* ld-sh/vxworks3-lib.s, ld-sh/vxworks3.dd, ld-sh/vxworks3.s,
	* ld-sh/vxworks4.d, ld-sh/vxworks4a.s, ld-sh/vxworks4b.s,
	* ld-sh/reloc1.s, ld-sh/reloc1.d: New tests.
2006-08-04 13:13:56 +00:00
Daniel Jacobowitz
d19628a59d * configure.tgt (i[3-7]86-*-solaris2*, i[3-7]86-*-solaris*): Correct
typo setting targ_extra_libpath.
2006-07-14 15:26:36 +00:00
Daniel Jacobowitz
0faaaeb8fc * configure.tgt (i[3-7]86-*-solaris2*, i[3-7]86-*-solaris*): Set
targ_extra_libpath.
2006-06-23 18:11:47 +00:00
Nick Clifton
28c9d252b4 Add support for AVR6 family 2006-05-24 07:36:12 +00:00
Richard Sandiford
910600e9c7 bfd/
* config.bfd (sparc-*-vxworks*): New stanza.
	* configure.in (bfd_elf32_sparc_vxworks_vec): New stanza.
	(bfd_elf32_sparc_vec, bfd_elf64_sparc_vec): Add elf-vxworks.lo.
	* configure: Regenerate.
	* elf32-sparc.c: Include elf-vxworks.h.
	(elf32_sparc_vxworks_link_hash_table_create: New.
	(elf32_sparc_vxworks_final_write_processing): New.
	(TARGET_BIG_SYM): Override for VxWorks.
	(TARGET_BIG_NAME, ELF_MINPAGESIZE): Likewise.
	(bfd_elf32_bfd_link_hash_table_create): Likewise.
	(elf_backend_want_got_plt, elf_backend_plt_readonly): Likewise.
	(elf_backend_got_header_size, elf_backend_add_symbol_hook): Likewise.
	(elf_backend_link_output_symbol_hook): Likewise.
	(elf_backend_emit_relocs): Likewise.
	(elf_backend_final_write_processing, elf32_bed): Likewise.
	* elfxx-sparc.c: Include libiberty.h and elf-vxworks.h.
	(sparc_vxworks_exec_plt0_entry, sparc_vxworks_exec_plt_entry): New.
	(sparc_vxworks_shared_plt0_entry, sparc_vxworks_shared_plt_entry): New.
	(_bfd_sparc_elf_link_hash_table_create): Don't initialize
	build_plt_entry here.
	(create_got_section): Initialize sgotplt for VxWorks.
	(_bfd_sparc_elf_create_dynamic_sections): Initialize build_plt_entry,
	plt_header_size and plt_entry_size, with new VxWorks-specific settings.
	Call elf_vxworks_create_dynamic_sections for VxWorks.
	(allocate_dynrelocs): Use plt_header_size and plt_entry_size.
	Allocate room for .got.plt and .rela.plt.unloaded entries on VxWorks.
	(_bfd_sparc_elf_size_dynamic_sections): Don't allocate a nop in .plt
	for VxWorks.  Check for the .got.plt section.
	(sparc_vxworks_build_plt_entry): New function.
	(_bfd_sparc_elf_finish_dynamic_symbol): Add handling of VxWorks PLTs.
	Don't make _GLOBAL_OFFSET_TABLE_ and _PROCEDURE_LINKAGE_TABLE_
	absolute on VxWorks.
	(sparc32_finish_dyn): Add special handling for DT_RELASZ
	and DT_PLTGOT on VxWorks.
	(sparc_vxworks_finish_exec_plt): New.
	(sparc_vxworks_finish_shared_plt): New.
	(_bfd_sparc_elf_finish_dynamic_sections): Call them.
	Use plt_header_size and plt_entry_size.
	* elfxx-sparc.h (_bfd_sparc_elf_link_hash_table): Add is_vxworks,
	srelplt2, sgotplt, plt_header_size and plt_entry_size fields.
	* Makefile.am (elfxx-sparc.lo): Depend on elf-vxworks.h.
	(elf32-sparc.lo): Likewise.
	* Makefile.in: Regenerate.
	* targets.c (bfd_elf32_sparc_vxworks_vec): Declare.
	(_bfd_target_vector): Add a pointer to it.

gas/
	* config/tc-sparc.c (sparc_target_format): Handle TE_VXWORKS.
	(GOTT_BASE, GOTT_INDEX): New.
	(tc_gen_reloc): Don't alter relocations against GOTT_BASE and
	GOTT_INDEX when generating VxWorks PIC.
	* configure.tgt (sparc*-*-vxworks*): Remove this special case;
	use the generic *-*-vxworks* stanza instead.

gas/testsuite/
	* gas/sparc/vxworks-pic.s, gas/sparc/vxworks-pic.d: New test.
	* gas/sparc/sparc.exp: Run it.  Remove sparc*-*-vxworks* XFAILs.

ld/
	* configure.tgt (sparc*-*-vxworks*): New stanza.
	* emulparams/elf32_sparc_vxworks.sh: New file.
	* Makefile.am (ALL_EMULATIONS): Add eelf32_sparc_vxworks.o.
	(eelf32_sparc_vxworks.c): New rule.
	* Makefile.in: Regenerate.

ld/testsuite/
	* ld-sparc/vxworks1.dd, ld-sparc/vxworks1.ld, ld-sparc/vxworks1-lib.dd,
	* ld-sparc/vxworks1-lib.nd, ld-sparc/vxworks1-lib.rd,
	* ld-sparc/vxworks1-lib.s, ld-sparc/vxworks1.rd, ld-sparc/vxworks1.s,
	* ld-sparc/vxworks1-static.d, ld-sparc/vxworks2.s,
	* ld-sparc/vxworks2.sd, ld-sparc/vxworks2-static.sd: New tests.
	* ld-sparc/sparc.exp: Run them.
2006-04-05 12:41:59 +00:00
Bernd Schmidt
753a4ce392 * emulparams/elf32bfinfd.sh: New file.
* emultempl/bfin.em: Delete.
	* emulparams/bfin.sh: Lose reference to bfin.em.
	* Makefile.am (eelf32bfin.c): Likewise.
	(eelf32bfinfd.c): New.
	* Makefile.in: Regenerate.
	* configure.tgt (bfin-*-elf, bfin-*-uclinux): Add elf32bfinfd to
	targ_extra_emuls.
2006-03-26 00:46:13 +00:00
Richard Sandiford
0a44bf6950 Richard Sandiford <richard@codesourcery.com>
Daniel Jacobowitz  <dan@codesourcery.com>
	Phil Edwards  <phil@codesourcery.com>
	Zack Weinberg  <zack@codesourcery.com>
	Mark Mitchell  <mark@codesourcery.com>
	Nathan Sidwell  <nathan@codesourcery.com>

bfd/
	* bfd-in2.h: Regenerate.
	* config.bfd (mips*-*-vxworks*, mips*el-*-vxworks*): New stanzas.
	* configure.in (bfd_elf32_bigmips_vxworks_vec): New stanza.
	(bfd_elf32_littlemips_vxworks_vec): Likewise.
	(bfd_elf32_bigmips_vec): Add elf-vxworks.lo.
	(bfd_elf32_littlemips_vec): Likewise.
	(bfd_elf32_nbigmips_vec): Likewise.
	(bfd_elf32_nlittlemips_vec): Likewise.
	(bfd_elf32_ntradbigmips_vec): Likewise.
	(bfd_elf32_ntradlittlemips_vec): Likewise.
	(bfd_elf32_tradbigmips_vec): Likewise.
	(bfd_elf32_tradlittlemips_vec): Likewise.
	(bfd_elf64_bigmips_vec): Likewise.
	(bfd_elf64_littlemips_vec): Likewise.
	(bfd_elf64_tradbigmips_vec): Likewise.
	(bfd_elf64_tradlittlemips_vec): Likewise.
	* elf32-mips.c: Include elf-vxworks.h.
	(mips_info_to_howto_rel): Use elf_backend_mips_rtype_to_howto
	instead of calling mips_elf32_rtype_to_howto directly.
	(mips_vxworks_copy_howto_rela): New reloc howto.
	(mips_vxworks_jump_slot_howto_rela): Likewise.
	(mips_vxworks_bfd_reloc_type_lookup): New function.
	(mips_vxworks_rtype_to_howto): Likewise.
	(mips_vxworks_final_write_processing): Likewise.
	(TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Override for VxWorks.
	(TARGET_BIG_SYM, TARGET_BIG_NAME, elf_bed, ELF_MAXPAGESIZE): Likewise.
	(elf_backend_want_got_plt): Likewise.
	(elf_backend_want_plt_sym): Likewise.
	(elf_backend_got_symbol_offset): Likewise.
	(elf_backend_want_dynbss): Likewise.
	(elf_backend_may_use_rel_p): Likewise.
	(elf_backend_may_use_rela_p): Likewise.
	(elf_backend_default_use_rela_p): Likewise.
	(elf_backend_got_header_size: Likewise.
	(elf_backend_plt_readonly): Likewise.
	(bfd_elf32_bfd_reloc_type_lookup): Likewise.
	(elf_backend_mips_rtype_to_howto): Likewise.
	(elf_backend_adjust_dynamic_symbol): Likewise.
	(elf_backend_finish_dynamic_symbol): Likewise.
	(bfd_elf32_bfd_link_hash_table_create): Likewise.
	(elf_backend_add_symbol_hook): Likewise.
	(elf_backend_link_output_symbol_hook): Likewise.
	(elf_backend_emit_relocs): Likewise.
	(elf_backend_final_write_processing: Likewise.
	(elf_backend_additional_program_headers): Likewise.
	(elf_backend_modify_segment_map): Likewise.
	(elf_backend_symbol_processing): Likewise.
	* elfxx-mips.c: Include elf-vxworks.h.
	(mips_elf_link_hash_entry): Add is_relocation_target and
	is_branch_target fields.
	(mips_elf_link_hash_table): Add is_vxworks, srelbss, sdynbss, srelplt,
	srelplt2, sgotplt, splt, plt_header_size and plt_entry_size fields.
	(MIPS_ELF_RELA_SIZE, MIPS_ELF_REL_DYN_NAME): New macros.
	(MIPS_RESERVED_GOTNO): Take a mips_elf_link_hash_table argument.
	Return 3 for VxWorks.
	(ELF_MIPS_GP_OFFSET): Change the argument from a bfd to a
	mips_elf_link_hash_table.  Return 0 for VxWorks.
	(MIPS_ELF_GOT_MAX_SIZE): Change the argument from a bfd to a
	mips_elf_link_hash_table.  Update the call to ELF_MIPS_GP_OFFSET.
	(mips_vxworks_exec_plt0_entry): New variable.
	(mips_vxworks_exec_plt_entry): Likewise.
	(mips_vxworks_shared_plt0_entry): Likewise.
	(mips_vxworks_shared_plt_entry): Likewise.
	(mips_elf_link_hash_newfunc): Initialize the new hash_entry fields.
	(mips_elf_rel_dyn_section): Change the bfd argument to a
	mips_elf_link_hash_table.  Use MIPS_ELF_REL_DYN_NAME to get
	the name of the section.
	(mips_elf_initialize_tls_slots): Update the call to
	mips_elf_rel_dyn_section.
	(mips_elf_gotplt_index): New function.
	(mips_elf_local_got_index): Add an input_section argument.
	Update the call to mips_elf_create_local_got_entry.
	(mips_elf_got_page): Likewise.
	(mips_elf_got16_entry): Likewise.
	(mips_elf_create_local_got_entry): Add bfd_link_info and input_section
	arguments.  Create dynamic relocations for each entry on VxWorks.
	(mips_elf_merge_gots): Update the use of MIPS_ELF_GOT_MAX_SIZE.
	(mips_elf_multi_got): Update the uses of MIPS_ELF_GOT_MAX_SIZE
	and MIPS_RESERVED_GOTNO.
	(mips_elf_create_got_section): Update the uses of
	MIPS_ELF_GOT_MAX_SIZE.  Create .got.plt on VxWorks.
	(is_gott_symbol): New function.
	(mips_elf_calculate_relocation): Use a dynobj local variable.
	Update the calls to mips_elf_local_got_index, mips_elf_got16_entry and
	mips_elf_got_page_entry.  Set G to the .got.plt entry when calculating
	VxWorks R_MIPS_CALL* relocations.  Calculate and use G for all GOT
	relocations on VxWorks.  Add dynamic relocations for references
	to the VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols.  Don't
	create dynamic relocations for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64
	in VxWorks executables.
	(mips_elf_allocate_dynamic_relocations): Add a bfd_link_info argument.
	Use MIPS_ELF_RELA_SIZE to calculate the size of a VxWorks entry.
	Don't allocate a null entry on VxWorks.
	(mips_elf_create_dynamic_relocation): Update the call to
	mips_elf_rel_dyn_section.  Use absolute rather than relative
	relocations for VxWorks, and make them RELA rather than REL.
	(_bfd_mips_elf_create_dynamic_sections): Don't make .dynamic
	read-only on VxWorks.  Update the call to mips_elf_rel_dyn_section.
	Create the .plt, .rela.plt, .dynbss and .rela.bss sections on
	VxWorks.  Likewise create the _PROCEDURE_LINKAGE_TABLE symbol.
	Call elf_vxworks_create_dynamic_sections for VxWorks and
	initialize the plt_header_size and plt_entry_size fields.
	(_bfd_mips_elf_check_relocs): Don't allow GOT relocations to be
	used in VxWorks executables.  Don't allocate dynamic relocations
	for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 in VxWorks executables.
	Set is_relocation_target for each symbol referenced by a relocation.
	Allocate .rela.dyn entries for relocations against the special
	VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols.  Create GOT
	entries for all VxWorks R_MIPS_GOT16 relocations.  Don't allocate
	a global GOT entry for symbols mentioned in VxWorks R_MIPS_CALL*,
	R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 relocations.  Update the calls
	to mips_elf_rel_dyn_section and mips_elf_allocate_dynamic_relocations.
	Set is_branch_target for symbols mentioned in R_MIPS_PC16 or R_MIPS_26
	relocations.  Don't set no_fn_stub on VxWorks.
	(_bfd_mips_elf_adjust_dynamic_symbol): Update the call to
	mips_elf_allocate_dynamic_relocations.
	(_bfd_mips_vxworks_adjust_dynamic_symbol): New function.
	(_bfd_mips_elf_always_size_sections): Do not allocate GOT page
	entries for VxWorks, and do not create multiple GOTs.
	(_bfd_mips_elf_size_dynamic_sections): Use MIPS_ELF_REL_DYN_NAME.
	Handle .got specially for VxWorks.  Update the uses of
	MIPS_RESERVED_GOTNO and mips_elf_allocate_dynamic_relocations.
	Check for sgotplt and splt.  Allocate the .rel(a).dyn contents last,
	once its final size is known.  Set DF_TEXTREL for VxWorks.  Add
	DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL, DT_PLTRELSZ and DT_JMPREL
	tags on VxWorks.  Do not add the MIPS-specific tags for VxWorks.
	(_bfd_mips_vxworks_finish_dynamic_symbol): New function.
	(mips_vxworks_finish_exec_plt): Likewise.
	(mips_vxworks_finish_shared_plt): Likewise.
	(_bfd_mips_elf_finish_dynamic_sections): Remove an unncessary call
	to mips_elf_rel_dyn_section.  Use a VxWorks-specific value of
	DT_PLTGOT.  Handle DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL,
	DT_PLTRELSZ and DT_JMPREL.  Update the uses of MIPS_RESERVED_GOTNO
	and mips_elf_rel_dyn_section.  Use a different GOT header for
	VxWorks.  Don't sort .rela.dyn on VxWorks.  Finish the PLT on VxWorks.
	(_bfd_mips_elf_link_hash_table_create): Initialize the new
	mips_elf_link_hash_table fields.
	(_bfd_mips_vxworks_link_hash_table_create): New function.
	(_bfd_mips_elf_final_link): Set the GP value to _GLOBAL_OFFSET_TABLE_
	on VxWorks.  Update the call to ELF_MIPS_GP_OFFSET.
	* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Declare.
	(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
	(_bfd_mips_vxworks_link_hash_table_create): Likewise.
	* libbfd.h: Regenerate.
	* Makefile.am (elfxx-mips.lo): Depend on elf-vxworks.h.
	(elf32-mips.lo): Likewise.
	* Makefile.in: Regenerate.
	* reloc.c (BFD_RELOC_MIPS_COPY, BFD_RELOC_MIPS_JUMP_SLOT): Declare.
	* targets.c (bfd_elf32_bigmips_vxworks_vec): Declare.
	(bfd_elf32_littlemips_vxworks_vec): Likewise.
	(_bfd_target_vector): Add entries for them.

gas/
	* config/tc-mips.c (mips_target_format): Handle vxworks targets.
	(md_begin): Complain about -G being used for PIC.  Don't change
	the text, data and bss alignments on VxWorks.
	(reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
	generating VxWorks PIC.
	(load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
	(macro): Likewise, but do not treat la $25 specially for
	VxWorks PIC, and do not handle jal.
	(OPTION_MVXWORKS_PIC): New macro.
	(md_longopts): Add -mvxworks-pic.
	(md_parse_option): Don't complain about using PIC and -G together here.
	Handle OPTION_MVXWORKS_PIC.
	(md_estimate_size_before_relax): Always use the first relaxation
	sequence on VxWorks.
	* config/tc-mips.h (VXWORKS_PIC): New.

gas/testsuite/
	* gas/mips/vxworks1.s, gas/mips/vxworks1.d,
	* gas/mips/vxworks1-xgot.d: New tests.
	* gas/mips/mips.exp: Run them.  Do not run other tests on VxWorks.

include/elf/
	* mips.h (R_MIPS_COPY, R_MIPS_JUMP_SLOT): New relocs.

ld/
	* configure.tgt (mips*el-*-vxworks*, mips*-*-vxworks*): Use
	separate VxWorks emulations.
	* emulparams/elf32ebmipvxworks.sh: New file.
	* emulparams/elf32elmipvxworks.sh: New file.
	* Makefile.am (ALL_EMULATIONS): Add eelf32ebmipvxworks.o and
	eelf32elmipvxworks.o.
	(eelf32ebmipvxworks.c, eelf32elmipvxworks.c): New rules.
	* Makefile.in: Regenerate.

ld/testsuite/
	* ld-mips/vxworks1.dd, ld-mips/vxworks1.ld, ld-mips/vxworks1-lib.dd,
	* ld-mips/vxworks1-lib.nd, ld-mips/vxworks1-lib.rd,
	* ld-mips/vxworks1-lib.s, ld-mips/vxworks1.rd, ld-mips/vxworks1.s,
	* ld-mips/vxworks1-static.d, ld-mips/vxworks2.s, ld-mips/vxworks2.sd,
	* ld-mips/vxworks2-static.sd: New tests.
	* ld-mips/mips-elf.exp: Run them.
2006-03-22 09:28:15 +00:00
Nick Clifton
d70c5fc7c5 Add support for the Infineon XC16X. 2006-02-17 14:36:28 +00:00
Nick Hudson
aaa2ab3d61 bfd:
* config.bfd (mips*el-*-netbsd*, mips*-*-netbsd*): Use
	traditional MIPS ELF targets.

	gas:
	* configure.tgt: set emulation for mips-*-netbsd*

	ld:
	* configure.tgt (mips*el-*-netbsd*, mips*-*-netbsd*):
	Use the traditional target.
2006-02-16 08:05:02 +00:00