The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified). If none are specified, the arch is
expected to support both, and the value will be probed based on the
user runtime options or the input program.
Only two arches today set the default value (bpf & mips). We can
probably let this go as it only shows up in one scenario: the sim
is invoked, but with no inputs, and no user endian selection. This
means bpf will not behave like the other arches: an error is shown
and forces the user to make a choice. If an input program is used
though, we'll still switch the default to that. This allows us to
remove the WITH_DEFAULT_TARGET_BYTE_ORDER setting.
For the ports that set a "wire" endian, move it to the runtime init
of the respective sim_open calls. This allows us to change the
WITH_TARGET_BYTE_ORDER to purely a user-selected configure setting
if they want to force a specific endianness.
With all the endian logic moved to runtime selection, we can move
the configure call up to the common dir so we only process it once
across all ports.
The ppc arch was picking the wire endian based on the target used,
but since we weren't doing that for other biendian arches, we can
let this go too. We'll rely on the input selecting the endian, or
make the user decide.
Currently, the sim-config module will abort if alignment settings
haven't been specified by the port's configure.ac. This is a bit
weird when we've allowed SIM_AC_OPTION_ALIGNMENT to seem like it's
optional to use. Thus everyone invokes it.
There are 4 alignment settings, but really only 2 matters: strict
and nonstrict. The "mixed" setting is just the default ("unset"),
and "forced" isn't used directly by anyone (it's available as a
runtime option for some ports).
The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified). If none are specified, then the
build won't work (see above as if SIM_AC_OPTION_ALIGNMENT wasn't
called). If default settings are provided, then that is used, but
we allow the user to override at runtime. Otherwise, the "wire"
settings are used and user runtime options to change are ignored.
Most ports specify a default, or set the "wire" to nonstrict. A
few set "wire" to strict, but it's not clear that's necessary as
it doesn't make the code behavior, by default, any different. It
might make things a little faster, but we should provide the user
the choice of the compromises to make: force a specific mode at
compile time for faster runtime, or allow the choice at runtime.
More likely it seems like an oversight when these ports were
initially created, and/or copied & pasted from existing ports.
With all that backstory, let's get to what this commit does.
First kill off the idea of a compile-time default alignment and
set it to nonstrict in the common code. For any ports that want
strict alignment by default, that code is moved to sim_open while
initializing the sim. That means WITH_DEFAULT_ALIGNMENT can be
completely removed.
Moving the default alignment to the runtime also allows removal
of setting the "wire" settings at configure time. Which allows
removing of all arguments to SIM_AC_OPTION_ALIGNMENT and moving
that call to common code.
The macro logic can be reworked to not pass WITH_ALIGNMENT as -D
CPPFLAG and instead move it to config.h.
All of these taken together mean we can hoist the macro up to the
top level and share it among all sims so behavior is consistent
among all the ports.
Move these options up to the common dir so we only test & export
them once across all ports. The AC_INIT macro does a lot of the
heavy lifting already which allows further simplification.
Move these options up to the common dir so we only test & export
them once across all ports.
The ppc code needs a little extra care with its trace settings as
it's not exactly the same API as the common code. The other knobs
are the same though.
Since ppc now shares a config.h with the top-level, move all of its
relevant settings up a level. The ppc port tests a lot more funcs,
but that's because its syscall emulation is a lot more complete.
We'll probably utilize some of these in the common code too.
Move the various platform tests up a level to avoid duplication
across the ports. When building multiple versions, this speeds
things up a bit.
For now we move the obvious stuff up a level, but we don't turn
own the config.h entirely just yet -- we still have some tests
related to libraries that need consideration.
This is needed when building for a target whose ar & ranlib are
incompatible with the current build system. For example, building
for Windows on a Linux system.
Then manually import the automake rule for libigen.a, but tweak the
tool variables to use the FOR_BUILD variants.
Provide a simple example simulator for people porting to new targets
to use as a reference. This one has the advantage of being used by
people and having a fun program available for it.
It doesn't require a special target -- the example simulators can be
built for any existing port.
This doesn't actually create one `run` program like other projects,
but creates multiple `run-$arch` targets. While it might not seem
that useful initially, this has some nice properties:
- Allows us to quickly build all sim targets in a single tree.
- Positions us better for converting targets over to a proper
multitarget build+install.
We don't have the ability to actually run tests against them, but
that's due to a limitation in gas: it doesn't support multitarget.
If that ever changes, we should be able to turn on our tests too.
We can improve the test framework to fallback to a system toolchain
if available to help mitigate that.
This simplifies the build a bit (especially for deps in port subdirs),
and avoids recursive make. This in turn speeds up the build, and sets
us up for multi-target.
The sim's recently switch to using Automake caused a build failure for
me, because I didn't have the correct auto* tools in my path.
However, the rule in the tree is that this is not needed in general.
This patch adds a call to AM_MAINTAINER_MODE, to align the sim with
the way the rest of the tree works here.
sim/ChangeLog
2021-03-08 Tom Tromey <tromey@adacore.com>
* aclocal.m4, configure, Makefile.in: Rebuild.
* configure.ac: Use AM_MAINTAINER_MODE.
This is needed to move to automake & its dejagnu-provided logic,
and eventually by the unified sim logic. The $arch is used only
to figure out which `run` program to use when running tests, and
as we move to a single top-level build, we can delete this and
use sim/run directly.
These settings might have made sense in darker compiler times, but I
think they're largely obsolete now. Looking through the values that
get used in HDEFINES, it's quite limited, and configure itself should
handle them. If we still need something, we can leverage standard
autoconf macros instead, after we get a clear user report.
TDEFINES was never set anywhere and was always empty, so prune that.
This is a hand-written implementation that should have fairly complete
coverage for the base integer instruction set ("i"), and for the atomic
("a") and integer multiplication+division ("m") extensions. It also
covers 32-bit & 64-bit targets.
The unittest coverage is a bit weak atm, but should get better.
This was mostly orphaned a while back, but left behind so people could
still run `make headers`. Merge that one target to the top sim dir and
delete all the build logic. This should avoid confusing people further.
Now that we've moved all ports to dejagnu & testsuite/sim/, the only
thing the testsuite/configure script has been doing is filling in the
sim_arch field in the testsuite/Makefile. We can simply let the top
sim/configure script do that for us now. This simplifies & speeds up
the build a bit by killing an entire configure script.
When building with a primary target that doesn't feature a simulator,
one would expect for nothing to be done in sim/. However, a
$(top_builddir)/sim/testsuite directory is created, with a Makefile
containing a rule like:
check-DEJAGNU: site.exp
echo "Dejagnu-checking in `pwd` directory ..."
rootme=`pwd`; export rootme; echo rootme = $$rootme; \
srcdir=`cd ${srcdir}; pwd`; export srcdir ; echo srcdir = $$srcdir; \
EXPECT=${EXPECT} ; export EXPECT ; echo EXPECT = $$EXPECT; \
if [ -f $$rootme/../../expect/expect ]; then \
TCL_LIBRARY=`cd $$srcdir/../../tcl/library && pwd`; \
export TCL_LIBRARY; \
fi; \
echo TCL_LIBRARY = $$TCL_LIBRARY; \
runtest=$(RUNTEST); echo runtest = $$runtest; \
if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
$$runtest $(RUNTESTFLAGS); \
else echo "WARNING: could not find \`runtest'" 1>&2; :;\
fi
Consequently, when `make check' recurses into sim/testsuite, the above
rule is executed. Until now, the desired effect (of doing nothing)
was achieved because `runtest --version' fails due to a malformed
site.exp being generated in objdir: it is malformed because the
primary target doesn't configure a $sim_arch. i.e. this was doing the
right thing just by chance.
However, the git version of dejagnu seems to have changed in a way
runtest doesn't try to load site.exp when it gets --version. The net
effect is that the rule above tries to actually run the tests, failing
miserably.
This little patch makes sim/configure to not recurse into
sim/testsuite if the primary target didn't configure a simulator.
Tested with:
- A simulator target (bpf-unkonwn-none).
- A simulator-less target (x86_64-linux-gnu).
- A simulator-less target and --build-targets=all.
sim/ChangeLog:
2020-09-03 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure.ac: Do not configure sim/testsuite nor sim/igen if the
primary target doesn't have a simulator.
* configure: Regenerate.
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
These are separted out to make the patch easier to read and smaller.
sim/ChangeLog:
2017-12-12 Stafford Horne <shorne@gmail.com>
Peter Gavin <pgavin@gmail.com>
* configure: Regenerated.
* or1k/aclocal.m4: Generated.
* or1k/config.in: Generated.
* or1k/configure: Generated.
Now that cconfig.h doesn't exist, there's no need to build in the common
subdir anymore. We leave the configure/Makefile files in there as there
is a helper for developers to generate the nltvals.def file. Once that
gets cleaned up in the future though, we can drop the build logic too.
Since the testsuite subdir has to handle dynamic arch values already,
there's no real value in requiring arches to opt in to it. Most have
a testsuite now anyways, and we're requiring it in the future.
Now that the common sim testsuite code supports .S and .c files, we
can import the Blackfin testsuite. There are about ~800 tests here,
so I'm only attaching a compressed patch of them. Other than adding
files to sim/testsuite/sim/bfin/, the sim/configure.tgt file was
updated to mark Blackfin as having a testsuite, and sim/configure
regenerated.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This can boot Das U-Boot and a Linux kernel. It also supports Linux
userspace FLAT and FDPIC (dynamic and static) ELFs.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The testsuite subdir has a note about unifying the target->subdir logic,
so do just that. The end goal here is to have `make check` work out of
the box without having to delve into dejagnu internals.
The target-specific logic is split out of the top level configure.ac file
and into a dedicated configure.tgt similar to other subprojects (gdb and
ld and etc...) with the difference that this file has to be included at
the m4 level instead of the shell level. This is necessary only because
autoconf requires AC_CONFIG_SUBDIRS be given a string literal and not a
variable value.
Then the toplevel and the testsuite configure files pull this in, the sim
subdir gets expanded into testsuite/site.exp, and the default sim run code
uses this info to set the sim path to the local compiled run file if it
hasn't already been specified.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
