Without the GNU_PROPERTY_X86_ISA_1_USED property, all ISAs may be used.
If a bit in the GNU_PROPERTY_X86_ISA_1_USED property is unset, the
corresponding x86 instruction set isn’t used. When merging properties
from 2 input files and one input file doesn't have the
GNU_PROPERTY_X86_ISA_1_USED property, the output file shouldn't have
it neither. This patch removes the GNU_PROPERTY_X86_ISA_1_USED
property if an input file doesn't have it.
This patch replaces the GNU_PROPERTY_X86_ISA_1_USED property with the
GNU_PROPERTY_X86_ISA_1_NEEDED property which is the minimum ISA
requirement.
bfd/
PR ld/23486
* elfxx-x86.c (_bfd_x86_elf_merge_gnu_properties): Remove
GNU_PROPERTY_X86_ISA_1_USED if an input file doesn't have it.
(_bfd_x86_elf_link_setup_gnu_properties): Adding the
GNU_PROPERTY_X86_ISA_1_NEEDED, instead of
GNU_PROPERTY_X86_ISA_1_USED, property.
ld/
PR ld/23486
* testsuite/ld-i386/i386.exp: Run PR ld/23486 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr23486a.d: New file.
* testsuite/ld-i386/pr23486b.d: Likewise.
* testsuite/ld-x86-64/pr23486a-x32.d: Likewise.
* testsuite/ld-x86-64/pr23486a.d: Likewise.
* testsuite/ld-x86-64/pr23486a.s: Likewise.
* testsuite/ld-x86-64/pr23486b-x32.d: Likewise.
* testsuite/ld-x86-64/pr23486b.d: Likewise.
* testsuite/ld-x86-64/pr23486b.s: Likewise.
* testsuite/ld-i386/property-3.r: Remove "x86 ISA used".
* testsuite/ld-i386/property-4.r: Likewise.
* testsuite/ld-i386/property-5.r: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-shstk3a.d: Likewise.
* testsuite/ld-i386/property-x86-shstk3b.d: Likewise.
* testsuite/ld-x86-64/property-3.r: Likewise.
* testsuite/ld-x86-64/property-4.r: Likewise.
* testsuite/ld-x86-64/property-5.r: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise.
This patch generates EH info for the new _notoc linkage stubs, to
support unwinding from asynchronous signal handlers. Unwinding
through the __tls_get_addr_opt stub was already supported, but that
was just a single stub. With multiple stubs the EH opcodes need to be
emitted and sized when iterating over stubs, so this is done when
emitting and sizing the stub code. Emitting the CIEs and FDEs is done
when sizing the stubs, as we did before in order to have the linker
generated FDEs indexed in .eh_frame_hdr. I moved the final tweaks to
FDEs from ppc64_elf_finish_dynamic_sections to ppc64_elf_build_stubs
simply because it's tidier to be done with them at that point.
bfd/
* elf64-ppc.c (struct map_stub): Delete tls_get_addr_opt_bctrl.
Add lr_restore, eh_size and eh_base.
(eh_advance, eh_advance_size): New functions.
(build_tls_get_addr_stub): Emit EH info for stub.
(ppc_build_one_stub): Likewise for _notoc stubs.
(ppc_size_one_stub): Size EH info for stub.
(group_sections): Init new map_stub fields.
(stub_eh_frame_size): Delete.
(ppc64_elf_size_stubs): Size EH info for stubs. Set up dummy EH
program for stubs.
(ppc64_elf_build_stubs): Reinit new map_stub fields. Set FDE
offset to stub section here..
(ppc64_elf_finish_dynamic_sections): ..rather than here.
ld/
* testsuite/ld-powerpc/notoc.s: Generate some cfi.
* testsuite/ld-powerpc/notoc.d: Adjust.
* testsuite/ld-powerpc/notoc.wf: New file.
* testsuite/ld-powerpc/powerpc.exp: Run "ext" and "notoc" tests
as run_ld_link_tests rather than run_dump_test.
R_PPC64_REL24_NOTOC is used on calls like "bl foo@notoc" to tell the
linker that linkage stubs for PLT calls or long branches can't use r2
for pic addressing. Instead, new stubs that generate pc-relative
addresses are used. One complication is that pc-relative offsets to
the PLT may need to be 64-bit in large programs, in contrast to the
toc-relative addressing used by older PLT linkage stubs where a 32-bit
offset is sufficient until the PLT itself exceeds 2G in size.
.eh_frame info to cover the _notoc stubs is yet to be implemented.
bfd/
* elf64-ppc.c (ADDI_R12_R11, ADDI_R12_R12, LIS_R12),
(ADDIS_R12_R11, ORIS_R12_R12_0, ORI_R12_R12_0),
(SLDI_R12_R12_32, LDX_R12_R11_R12, ADD_R12_R11_R12): Define.
(ppc64_elf_howto_raw): Add R_PPC64_REL24_NOTOC entry.
(ppc64_elf_reloc_type_lookup): Support R_PPC64_REL24_NOTOC.
(ppc_stub_type): Add ppc_stub_long_branch_notoc,
ppc_stub_long_branch_both, ppc_stub_plt_branch_notoc,
ppc_stub_plt_branch_both, ppc_stub_plt_call_notoc, and
ppc_stub_plt_call_both.
(is_branch_reloc): Add R_PPC64_REL24_NOTOC.
(build_offset, size_offset): New functions.
(plt_stub_size): Support plt_call_notoc and plt_call_both.
(ppc_build_one_stub, ppc_size_one_stub): Support new stubs.
(toc_adjusting_stub_needed): Handle R_PPC64_REL24_NOTOC.
(ppc64_elf_size_stubs): Likewise, and new stubs.
(ppc64_elf_build_stubs, ppc64_elf_relocate_section): Likewise.
* reloc.c: Add BFD_RELOC_PPC64_REL24_NOTOC.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Support @notoc.
(ppc_force_relocation, ppc_fix_adjustable): Handle REL24_NOTOC.
ld/
* testsuite/ld-powerpc/ext.d,
* testsuite/ld-powerpc/ext.s,
* testsuite/ld-powerpc/ext.lnk,
* testsuite/ld-powerpc/notoc.d,
* testsuite/ld-powerpc/notoc.s: New tests.
* testsuite/ld-powerpc/powerpc.exp: Run them.
Not a lot is conveyed by putting _r2off in a stub symbol that can't be
seen by inspecting the stub code or the toc restoring instruction
immediately after a call via such a stub. Also, we don't distinguish
plt_call stub symbols from plt_call_r2save stub symbols, so this patch
makes long branch and plt branch stub symbols consistent with that
decision.
bfd/
* elf64-ppc.c (ppc_build_one_stub): Lose "_r2off" in stub symbols.
ld/
* testsuite/ld-powerpc/elfv2exe.d: Adjust for stub symbol change.
* testsuite/ld-powerpc/tocopt6.d: Likewise.
The .note.gnu.property section should be aligned to 4 bytes for x32.
* testsuite/ld-x86-64/property-x86-3.s: Use ".p2align 2" to
align .note.gnu.property section if __64_bit__ is undefined.
Add a testcase to limit open files to 16 for AR with plugin. Before
commit 103da91bc0
Author: Nick Clifton <nickc@redhat.com>
Date: Wed Aug 1 14:34:41 2018 +0100
Close resource leaks in the BFD library's plugin handler.
it failed with:
../binutils/ar: tmpdir/pr23460f.o: plugin needed to handle lto object
PR binutils/23460
* testsuite/ld-plugin/lto.exp: Run the PR binutils/23460 test.
* testsuite/ld-plugin/pr23460a.c: New file.
* testsuite/ld-plugin/pr23460b.c: Likewise.
* testsuite/ld-plugin/pr23460c.c: Likewise.
* testsuite/ld-plugin/pr23460d.c: Likewise.
* testsuite/ld-plugin/pr23460e.c: Likewise.
* testsuite/ld-plugin/pr23460f.c: Likewise.
The modified test failed on some powerpc targets due to differences in
default hash style. If the default hash style is both, then more
sections are created, bumping section ids. Section id is used in stub
symbols and although the test is careful to not depend on id in
labels, the stub hash traversal order changes when stub names change.
That lead to the stubs being emitted in a different order and thus not
matching expected output.
* testsuite/ld-powerpc/powerpc.exp: Run tlsopt5 with hash-style
specified.
This patch sets stub_offset in ppc_size_one_stub rather than in
ppc_build_one_stub. That allows the plt stub alignment to be done in
just ppc_size_one_stub rather than both functions. The patch also
corrects the place where the alignment was done, fixing a possible
error in .eh_frame data, and tidies some offset calculations.
bfd/
* elf64-ppc.c (plt_stub_pad): Delay plt_stub_size call until needed.
(ppc_build_one_stub): Don't set stub_offset, instead assert that
it is sane. Don't adjust stub_offset for alignment. Adjust size
calculation. Use "targ" temp when calculating offsets.
(ppc_size_one_stub): Set stub_offset here. Use "targ" temp when
calculating offsets. Adjust for alignment before setting
tls_get_addr_opt_bctrl.
ld/
* testsuite/ld-powerpc/powerpc.exp: Run tlsopt5 with plt alignment.
* testsuite/ld-powerpc/tlsopt5.s: Add extra call.
* testsuite/ld-powerpc/tlsopt5.wf: Adjust expected output.
* testsuite/ld-powerpc/tlsopt5.d: Likewise.
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc.
This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about.
bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY.
(BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise.
* Makefile.in: Regenerated.
* archures.c (enum bfd_architecture): Add bfd_arch_csky and
related bfd_mach defines.
(bfd_csky_arch): Declare.
(bfd_archures_list): Add C-SKY.
* bfd-in.h (elf32_csky_build_stubs): Declare.
(elf32_csky_size_stubs): Declare.
(elf32_csky_next_input_section: Declare.
(elf32_csky_setup_section_lists): Declare.
* bfd-in2.h: Regenerated.
* config.bfd: Add C-SKY.
* configure.ac: Likewise.
* configure: Regenerated.
* cpu-csky.c: New file.
* elf-bfd.h (enum elf_target_id): Add C-SKY.
* elf32-csky.c: New file.
* libbfd.h: Regenerated.
* reloc.c: Add C-SKY relocations.
* targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare.
(_bfd_target_vector): Add C-SKY target vector entries.
binutils* readelf.c: Include elf/csky.h.
(guess_is_rela): Handle EM_CSKY.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
(is_32bit_abs_reloc): Likewise.
include * dis-asm.h (csky_symbol_is_valid): Declare.
* opcode/csky.h: New file.
opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c.
* Makefile.in: Regenerated.
* configure.ac: Add C-SKY.
* configure: Regenerated.
* csky-dis.c: New file.
* csky-opc.h: New file.
* disassemble.c (ARCH_csky): Define.
(disassembler, disassemble_init_for_target): Add case for ARCH_csky.
* disassemble.h (print_insn_csky, csky_get_disassembler): Declare.
gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY.
(TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise.
* Makefile.in: Regenerated.
* config/tc-csky.c: New file.
* config/tc-csky.h: New file.
* config/te-csky_abiv1.h: New file.
* config/te-csky_abiv1_linux.h: New file.
* config/te-csky_abiv2.h: New file.
* config/te-csky_abiv2_linux.h: New file.
* configure.tgt: Add C-SKY.
* doc/Makefile.am (CPU_DOCS): Add entry for C-SKY.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set CSKY feature.
* doc/as.texi (Overview): Add C-SKY options.
(Machine Dependencies): Likewise.
* doc/c-csky.texi: New file.
* testsuite/gas/csky/*: New test cases.
ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations.
(ecskyelf.c, ecskyelf_linux.c): New rules.
* Makefile.in: Regenerated.
* configure.tgt: Add C-SKY.
* emulparams/cskyelf.sh: New file.
* emulparams/cskyelf_linux.sh: New file.
* emultempl/cskyelf.em: New file.
* gen-doc.texi: Add C-SKY.
* ld.texi: Likewise.
(Options specific to C-SKY targets): New section.
* testsuite/ld-csky/*: New tests.
This adds support for ".localentry 1", a new st_other
STO_PPC64_LOCAL_MASK encoding that signifies a function with a single
entry point like ".localentry 0", but unlike a ".localentry 0"
function does not preserve r2.
include/
* elf/ppc64.h: Specify byte offset to local entry for values
of two to six in STO_PPC64_LOCAL_MASK. Clarify r2 return
value for such functions when entering via global entry point.
Specify meaning of a value of one in STO_PPC64_LOCAL_MASK.
bfd/
* elf64-ppc.c (ppc64_elf_size_stubs): Use a ppc_stub_long_branch_r2off
for calls to symbols with STO_PPC64_LOCAL_MASK bits set to 1.
gas/
* config/tc-ppc.c (ppc_elf_localentry): Allow .localentry values
of 1 and 7 to directly set value into STO_PPC64_LOCAL_MASK bits.
ld/testsuite/
* ld-powerpc/elfv2.s: Add .localentry f5,1 testcase.
* ld-powerpc/elfv2exe.d: Update.
* ld-powerpc/elfv2so.d: Update.
One of the ill effects of ld -r is to mash together sections. That
can result in reduced icache performance at runtime due to unexpected
movement of code. Another problem is that sections can become too
large to link on targets that have limited relative addressing. ld -r
--relax attempts to overcome the large section problem for branches by
inserting trampolines, but the powerpc support added lots of
unnecessary trampolines. This patch trims them somewhat.
bfd/
* elf32-ppc.c (ppc_elf_relax_section): Ignore common or undef locals.
Avoid trashing toff with added when used as a symbol index.
Ignore R_PPC_PLTREL24 addends in unused example code. Avoid
creating unnecessary fixups when relocatable.
ld/
* testsuite/ld-powerpc/big.s: New file.
* testsuite/ld-powerpc/relaxrl.d: New test.
* testsuite/ld-powerpc/powerpc.exp: Run new test.
* testsuite/ld-powerpc/relaxr.d: Adjust.
Three tests with individual .exp files can be implemented in less
verbose way with run_dump_test infrastructure. Convert them.
ld/
2018-07-23 Max Filippov <jcmvbkbc@gmail.com>
* testsuite/ld-xtensa/coalesce.d: New file.
* testsuite/ld-xtensa/coalesce.exp: Remove file.
* testsuite/ld-xtensa/diff_overflow.d: New file.
* testsuite/ld-xtensa/diff_overflow.exp: Remove file.
* testsuite/ld-xtensa/lcall.d: New file.
* testsuite/ld-xtensa/lcall.exp: Remove file.
* testsuite/ld-xtensa/xtensa.exp (coalesce, diff_overflow)
(lcall): New tests.
ld/
2018-07-23 Max Filippov <jcmvbkbc@gmail.com>
* testsuite/ld-xtensa/relax-static-defs.s: New file.
* testsuite/ld-xtensa/relax-static-local-pie.d: New file.
* testsuite/ld-xtensa/relax-static-local-shared.d: New file.
* testsuite/ld-xtensa/relax-static-local.s: New file.
* testsuite/ld-xtensa/relax-static-pie.d: New file.
* testsuite/ld-xtensa/relax-static-shared.d: New file.
* testsuite/ld-xtensa/relax-static.s: New file.
* testsuite/ld-xtensa/relax-undef-weak-local-pie.d: New file.
* testsuite/ld-xtensa/relax-undef-weak-local-shared.d: New file.
* testsuite/ld-xtensa/relax-undef-weak-local.s: New file.
* testsuite/ld-xtensa/relax-undef-weak-pie.d: New file.
* testsuite/ld-xtensa/relax-undef-weak-shared.d: New file.
* testsuite/ld-xtensa/relax-undef-weak.s: New file.
* testsuite/ld-xtensa/xtensa.exp: New file.
xtensa.exp in fact only checks xtensa*-*-linux* configurations, rename
it to xtensa-linux.exp to allow xtensa.exp to check xtensa*-*-*.
ld/
2018-07-23 Max Filippov <jcmvbkbc@gmail.com>
* testsuite/ld-xtensa/xtensa.exp: Rename to xtensa-linux.exp.
PowerPC64 fails here due to emitting a warning about discarded dynamic
relocations. That's a good thing, since accidentally discarding
dynamic relocations will likely result in a non-working binary.
* testsuite/ld-elf/reloc-discard-warn.d: New.
* testsuite/ld-elf/reloc-discard.d: Skip test on PowerPC64.
On many targets, like x86, .rel.dyn/.rela.dyn section is combined from
different .rel/.rela sections by -z combreloc. To discard dynamic
relocation section, we need to discard .rel.* and .rela.* sections
instead of .rel.dyn and .rela.dyn sections.
Note: This test fails for targets which issue a warning when dynamic
section is discarded.
* testsuite/ld-elf/reloc-discard.ld: Discard .rel.* and .rela.*
sections instead of .rel.dyn and .rela.dyn sections.
When -z separate-code, which is enabled by default for Linux/x86, is
used to create executable, ld won't place any data in the code-only
PT_LOAD segment. If there are no data sections placed before the
code-only PT_LOAD segment, the program headers won't be mapped into
any PT_LOAD segment. When the executable tries to access it (based
on the program header address passed in AT_PHDR), it will lead to
segfault. This patch inserts a GNU_PROPERTY_X86_ISA_1_USED note if
there may be no data sections before the text section so that the
first PT_LOAD segment won't be code-only and will contain the program
header.
Testcases are adjusted to either pass "-z noseparate-code" to ld or
discard the .note.gnu.property section. A Linux/x86 run-time test is
added.
bfd/
PR ld/23428
* elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): If the
separate code program header is needed, make sure that the first
read-only PT_LOAD segment has no code by adding a
GNU_PROPERTY_X86_ISA_1_USED note.
ld/
PR ld/23428
* testsuite/ld-elf/linux-x86.S: New file.
* testsuite/ld-elf/linux-x86.exp: Likewise.
* testsuite/ld-elf/pr23428.c: Likewise.
* testsuite/ld-elf/sec64k.exp: Pass "-z noseparate-code" to ld
for Linux/x86 targets.
* testsuite/ld-i386/abs-iamcu.d: Likewise.
* testsuite/ld-i386/abs.d: Likewise.
* testsuite/ld-i386/pr12718.d: Likewise.
* testsuite/ld-i386/pr12921.d: Likewise.
* testsuite/ld-x86-64/abs-k1om.d: Likewise.
* testsuite/ld-x86-64/abs-l1om.d: Likewise.
* testsuite/ld-x86-64/abs.d: Likewise.
* testsuite/ld-x86-64/pr12718.d: Likewise.
* testsuite/ld-x86-64/pr12921.d: Likewise.
* testsuite/ld-linkonce/zeroeh.ld: Discard .note.gnu.property
section.
* testsuite/ld-scripts/print-memory-usage.t: Likewise.
* testsuite/ld-scripts/size-2.t: Likewise.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Use ld
to create executable if language is "asm".
This patch fixes some ifunc testisms after H.J. Lu's patch to enable the
use of IFUNC pointers in position dependent code for binutils. See PR
LD/23169 in binutils bugzilla.
The aarch64 ifunc error message test was changed to no longer expect
this error message as this is now an accepted combination. This patch
also disables the executable tests added by H.J. Lu for aarch64, just as
Alan Modra did with his patch, as these tests only seem to work on some
architectures.
ld/ChangeLog:
2018-07-19 Andre Vieira <andre.simoesdiasvieira@arm.com>
* testsuite/ld-aarch64/ifunc-9.d: Remove no longer expected error.
* testsuite/ld-ifunc/ifunc.exp: Disable tests for aarch64.
Fix a crash that occurs in `_bfd_mips_elf_finish_dynamic_sections' if a
dynamic relocation section has been created, but marked to be discarded
by an assignment to the /DISCARD/ output section in a linker script.
In that case the output section is the absolute section, which has no
ELF section data attached, so trying to set its `sh_size' parameter
causes a null pointer dereference.
This is only done as the value for the DT_RELSZ dynamic entry is being
set, so fix the problem by not creating DT_REL, DT_RELSZ or DT_RELENT
dynamic entries in the first place if the dynamic relocation section
will not be output, as with no dynamic relocation data present these
would not serve their purpose anyway.
Add a generic ELF test case to verify that no dynamic relocation data is
reported in the dynamic segment.
bfd/
* elfxx-mips.c (_bfd_mips_elf_size_dynamic_sections): Do not
create DT_REL, DT_RELSZ or DT_RELENT dynamic entries if the
dynamic relocation section will be discarded from output.
(_bfd_mips_elf_finish_dynamic_sections) <DT_RELSZ>: Assert that
the dynamic relocation section will be retained in output.
ld/
* testsuite/ld-elf/reloc-discard.d: New test.
* testsuite/ld-elf/reloc-discard.ld: New test linker script.
* testsuite/ld-elf/reloc-discard.s: New test source.
Currently on S/390 the .got.plt always comes first which prevents the
GNU_RELRO segment from being extended across the non-plt GOT entries.
Just swapping both unfortunately is not that simple since our ABI
requires the _GLOBAL_OFFSET_TABLE_ symbol to point to the very
beginning of the entire GOT. Of the 3 magic GOT entries the first is
accessed via got pointer while second and third are being accessed via
DT_PLTGOT. In order to keep them together we make DT_PLTGOT to point
to the .got instead of .got.plt. However, this violates an assumption
in the dynamic linker prelink undo code about the GOTPLT entries
starting at DT_PLTGOT + 3. We got rid of this requirement with a
Glibc patch already in version 2.24:
https://sourceware.org/ml/libc-alpha/2016-06/msg01302.html
So the S/390 relro GOT layout will look like this with this patch:
+----------------------------------+
|got[0]: DYNAMIC | <--- _GLOBAL_OFFSET_TABLE_ == DT_PLTGOT .got
|got[1]: link_map parm |
|got[2]: &_dl_runtime_resolve |
+----------------------------------+
| | non-plt GOT entries
| |
| |
+----------------------------------+
| | <--- .gotplt, PLT GOT entries
| |
| |
| |
+----------------------------------+
The patch detects the current layout in size_dynamic_section in order
to deal also with linker scripts not generated by this ld version.
With partial relro enabled we pick a linker script where .got and
.got.plt are swapped which then triggers the rest of the logic.
ld/ChangeLog:
2018-07-18 Andreas Krebbel <krebbel@linux.ibm.com>
* emulparams/elf64_s390.sh: Define GENERATE_RELRO_SCRIPT and
SEPARATE_GOTPLT.
* testsuite/ld-s390/gotreloc_64-relro-1.dd: New test.
* testsuite/ld-s390/gotreloc_64-norelro-1.dd: Renamed from ...
* testsuite/ld-s390/gotreloc_64-1.dd: ... this.
* testsuite/ld-s390/s390.exp: Split the GOT testcase into two.
bfd/ChangeLog:
2018-07-18 Andreas Krebbel <krebbel@linux.ibm.com>
* elf-s390-common.c (s390_gotplt_after_got_p): New function.
(s390_got_pointer): New function.
(s390_got_offset): New function.
(s390_gotplt_offset): New function.
* elf64-s390.c (allocate_dynrelocs): Adjust comment.
(elf_s390_size_dynamic_sections): Move space for magic GOT entries
from .got.plt to .got if necessary and pick the right location for
_GLOBAL_OFFSET_TABLE_.
(elf_s390_relocate_section): Use the wrapper functions from
elf-s390-common.c to deal with both possible layouts (either .got
or .got.plt first).
(elf_s390_finish_dynamic_sections): Likewise.
(elf_s390_finish_dynamic_symbol): Make the location of the GOT
magic entries conditional.
Complement commit 500c05ddbe ("MIPS/ld/testsuite: Limit export class
call reloc tests to DSO targets") and also check for target's shared
library support in determining whether to run reloc 6 tests, which
require it. No changes in results as all targets currently enabled for
NewABI testing support shared libraries.
ld/
* testsuite/ld-mips-elf/mips-elf.exp: Limit reloc 6 tests to
shared library targets.
Correct an issue with commit 0f20cc3522 ("TLS support for MIPS"),
<https://sourceware.org/ml/binutils/2005-02/msg00607.html>, where a
condition used to determine whether to use a dynamic symbol for GD, LD
and IE TLS dynamic relocations against a symbol that has been defined
locally has been incorrectly reversed.
It's executables rather than dynamic shared objects where no symbol is
required, because such symbols cannot be preempted and therefore their
values (thread pointer offsets) are fixed at the static link time as is
the associated module ID of the main executable, so the original
condition should have been `shared' instead of `!shared'. This wrong
condition was then later converted from `!shared' to `!bfd_link_pic',
with commit 0e1862bb40 ("Add output_type to bfd_link_info").
Use the correct `bfd_link_dll' condition then, and adjust code for the
dynamic symbol index possibly being -1 as with symbols that have been
forced local, removing unnecessary dynamic relocations from dynamic
regular executables. PIE executables are unaffected as the existing
condition excluded them by chance due to the conversion mentioned above.
Adjust test cases accordingly.
bfd/
* elfxx-mips.c (mips_tls_got_relocs): Use `bfd_link_dll' rather
than `!bfd_link_pic' in determining the dynamic symbol index.
Avoid the index of -1.
(mips_elf_initialize_tls_slots): Likewise. Flatten code by
moving `dyn' to the beginning of the function block.
ld/
* testsuite/ld-mips-elf/tlsdyn-o32.d: Update test for dynamic
relocation removal.
* testsuite/ld-mips-elf/tlsdyn-o32.got: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-1.d: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-1.got: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-2.d: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-2.got: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-3.d: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-3.got: Likewise.
Correct a commit 0e1862bb40 ("Add output_type to bfd_link_info") issue
and use `bfd_link_dll' rather than `bfd_link_pic' in determining whether
to fully resolve GD, LD and IE TLS relocations referring to symbols
locally defined rather than deferring them to the load time by means of
dynamic relocations.
Such symbols cannot be preempted in PIE executables, which are
necessarily PIC, and therefore their values (thread pointer offsets) are
fixed at the static link time as is the associated module ID of the main
executable.
Given the `tlsbin-o32.s' and `tlsdyn-o32.s' sources from our test suite
this removes the absolute TLS relocations from the static:
DYNAMIC RELOCATION RECORDS
OFFSET TYPE VALUE
00000000 R_MIPS_NONE *ABS*
1000002c R_MIPS_TLS_TPREL32 *ABS*
10000030 R_MIPS_TLS_DTPMOD32 *ABS*
10000038 R_MIPS_TLS_DTPMOD32 *ABS*
and the dynamic:
DYNAMIC RELOCATION RECORDS
OFFSET TYPE VALUE
00000000 R_MIPS_NONE *ABS*
1000002c R_MIPS_TLS_TPREL32 *ABS*
10000038 R_MIPS_TLS_DTPMOD32 *ABS*
10000044 R_MIPS_TLS_DTPMOD32 *ABS*
10000030 R_MIPS_TLS_DTPMOD32 tlsvar_gd
10000034 R_MIPS_TLS_DTPREL32 tlsvar_gd
10000040 R_MIPS_TLS_TPREL32 tlsvar_ie
PIE executable respectively, as reported by `objdump -R', and fills the
corresponding GOT slots with the values expected, as recorded with the
test cases added. The new output from `objdump -R' is:
DYNAMIC RELOCATION RECORDS (none)
and:
DYNAMIC RELOCATION RECORDS
OFFSET TYPE VALUE
00000000 R_MIPS_NONE *ABS*
10000030 R_MIPS_TLS_DTPMOD32 tlsvar_gd
10000034 R_MIPS_TLS_DTPREL32 tlsvar_gd
10000040 R_MIPS_TLS_TPREL32 tlsvar_ie
for the static and the dynamic executable respectively.
2018-07-11 Maciej W. Rozycki <macro@mips.com>
Rich Felker <bugdal@aerifal.cx>
bfd/
PR ld/22570
* elfxx-mips.c (mips_tls_got_relocs): Use `bfd_link_dll' rather
than `bfd_link_pic' to determine whether dynamic relocations are
to be produced.
(mips_elf_initialize_tls_slots): Likewise.
ld/
PR ld/22570
* testsuite/ld-mips-elf/tlsbin-pie-o32.d: New test.
* testsuite/ld-mips-elf/tlsbin-pie-o32.got: New test.
* testsuite/ld-mips-elf/tlsdyn-pie-o32.d: New test.
* testsuite/ld-mips-elf/tlsdyn-pie-o32.got: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
git commit 624940689a wrongly changed fill.d and fill16.d notarget
entries to xfail, so revert that change and instead replace notarget
with skip. The two tests are complementary.
This patch also modifies the pr20022 test to use .data, avoiding
xfails on targets that complain about dynamic relocations in .text.
This shows a bug in metag which discards section _foo in pr2022.so.
* testsuite/ld-elf/hash.d: Comment on mips xfail.
* testsuite/ld-gc/pr20022b.s: Use .data not .text.
* testsuite/ld-gc/pr20022.d: Remove xfails.
* testsuite/ld-scripts/fill.d: Revert most of last patch, but use
skip rather than notarget.
* testsuite/ld-scripts/fill16.d: Likewise.
Only run MIPS/LD export class call relocation tests with shared library
targets, avoiding:
.../ld/ld-new: -shared not supported
linker errors and removing:
FAIL: MIPS export class call relocation test (o32)
regressions with `mipsel-ps2-elf' and `mips64el-ps2-elf' targets.
ld/
* testsuite/ld-mips-elf/mips-elf.exp: Limit export class call
relocation tests to shared library targets.
The current default dumps for n64 GOT relocation tests only work for
IRIX targets really, while the Linux dumps are suitable for non-Linux
targets as well. Make the Linux dumps the default then and handle the
IRIX ones as a special case.
Define an `irix' variable as a shorthand for `[istarget *-*-irix*]' and
use it for these n64 GOT relocation tests as well as export class call
relocation tests.
ld/
* testsuite/ld-mips-elf/elf-rel-got-n64.d: Rename to...
* testsuite/ld-mips-elf/elf-rel-got-n64-irix.d: ... this.
* testsuite/ld-mips-elf/elf-rel-got-n64-linux.d: Rename to...
* testsuite/ld-mips-elf/elf-rel-got-n64.d: ... this.
* testsuite/ld-mips-elf/elf-rel-xgot-n64.d: Rename to...
* testsuite/ld-mips-elf/elf-rel-xgot-n64-irix.d: ... this.
* testsuite/ld-mips-elf/elf-rel-xgot-n64-linux.dd: Rename to...
* testsuite/ld-mips-elf/elf-rel-xgot-n64.d: ... this.
* testsuite/ld-mips-elf/mips-elf.exp: Update accordingly.
Define `irix' as a shorthand for `[istarget *-*-irix*]' and use
it throughout.
Factor in the presence of a `.gnu.attributes' section at the end of the
respective dumps:
Disassembly of section .gnu.attributes:
0000000000000000 <.gnu.attributes>:
0: 41000000 bc0f 4 <__dso_displacement+0x4>
4: 0f676e75 jal d9db9d4 <__dso_displacement+0xd9db9d4>
8: 00010000 sll zero,at,0x0
c: 00070401 0x70401
and also ignore any trailing output with the IRIX variant of n64 GOT
relocation tests, like already done with the Linux and the embedded
ones, removing:
FAIL: MIPS ELF got reloc n64
FAIL: MIPS ELF xgot reloc n64
LD testsuite regressions with the `mips-sgi-irix6' target.
ld/
* testsuite/ld-mips-elf/elf-rel-got-n64.d: Add `#pass' at the
end.
* testsuite/ld-mips-elf/elf-rel-xgot-n64.d: Likewise.
Correct a MIPS/BFD linker issue with dynamic symbol and corresponding
GOT entry values being redirected to lazy binding stubs where the stubs
section has been discarded by assigning to the `/DISCARD/' output
section in the linker script used. The issue manifests itself by the
values entered being relative to the absolute section, which is what any
discarded sections are internally assigned in the linker.
For the `stub-dynsym-2.s' piece of code included as a test case with
this change this issue results in the dynamic symbol table and the GOT
looking like:
Symbol table '.dynsym' contains 3 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00000010 0 FUNC GLOBAL DEFAULT UND bar
2: 00000000 0 FUNC GLOBAL DEFAULT UND foo
Primary GOT:
Canonical gp value: 00097ff0
Reserved entries:
Address Access Initial Purpose
00090000 -32752(gp) 00000000 Lazy resolver
00090004 -32748(gp) 80000000 Module pointer (GNU extension)
Global entries:
Address Access Initial Sym.Val. Type Ndx Name
00090008 -32744(gp) 00000010 00000010 FUNC UND bar
0009000c -32740(gp) 00000000 00000000 FUNC UND foo
if assembled to regular MIPS code, or:
Symbol table '.dynsym' contains 3 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000d 0 FUNC GLOBAL DEFAULT UND bar
2: 00000001 0 FUNC GLOBAL DEFAULT UND foo
Primary GOT:
Canonical gp value: 00097ff0
Reserved entries:
Address Access Initial Purpose
00090000 -32752(gp) 00000000 Lazy resolver
00090004 -32748(gp) 80000000 Module pointer (GNU extension)
Global entries:
Address Access Initial Sym.Val. Type Ndx Name
00090008 -32744(gp) 0000000d 0000000d FUNC UND bar
0009000c -32740(gp) 00000001 00000001 FUNC UND foo
if assembled to microMIPS code. Symbol values and GOT entries record
the offset into the inexistent stubs section and the ISA bit rather than
zero, which would be the case if a lazy binding stub was not used for
other reasons, such as the value of the symbol being taken for a purpose
other than making a function call (e.g. an R_MIPS_GOT16 relocation).
Correct the issue by refraining from redirecting symbols to lazy binding
stubs if the stubs section is going to be discarded.
bfd/
* elfxx-mips.c (_bfd_mips_elf_adjust_dynamic_symbol): Don't set
`->needs_lazy_stub' if the stubs output section is the absolute
section.
ld/
* testsuite/ld-mips-elf/stub-dynsym-2.dd: New test.
* testsuite/ld-mips-elf/stub-dynsym-2.gd: New test.
* testsuite/ld-mips-elf/stub-dynsym-2.sd: New test.
* testsuite/ld-mips-elf/stub-dynsym-discard-2.gd: New test.
* testsuite/ld-mips-elf/stub-dynsym-discard-2.sd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-2.dd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-2.gd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-2.sd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-2.dd: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-2.gd: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-2.sd: New
test.
* testsuite/ld-mips-elf/stub-dynsym-2.ld: New test linker
script.
* testsuite/ld-mips-elf/stub-dynsym-discard-2.ld: New test
linker script.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Bring the LD implementation of `run_dump_test' in line with its binutils
and GAS counterparts and report the UNSUPPORTED status for tests the run
of which has been prevented by means of one or more of `target',
`alltargets' and `notarget' tags. Define `skip', `anyskip' and `noskip'
tags, which do not report anything for tests that are not run.
The rationale behind this is that we want to have unsupported tests
reported to ensure that they have actually been attempted and have not
been accidentally suppressed. Then tests which have target-specific
variants that cannot be expressed with a single .d file can make use of
the newly added tags to silently suppress the uninteresting variants.
ld/
* testsuite/lib/ld-lib.exp (run_dump_test): Call `unsupported'
if the target being tested has been excluded by means of one or
more of `target', `alltargets' and `notarget' tags. Add support
for `skip', `anyskip' and `noskip' tags.
Bring the LD implementation of `run_dump_test' in line with its binutils
and GAS counterparts and use the intended test name, from the `name' tag
if set, for test status reporting as soon as it is available.
ld/
* testsuite/lib/ld-lib.exp (run_dump_test): Move the setting of
`testname' earlier on and use it for test status reporting.
With config.sub now properly returning m68hc12-unknown-elf rather than
m68hc12-unknown-none, more ELF tests run. This patch enables
STB_GNU_UNIQUE processing fixing some testsuite failures that probably
no m68hc12 user cares about, and removes some XPASSes.
bfd/
* elf32-m68hc1x.c (elf32_m68hc11_post_process_headers): Call
_bfd_elf_post_process_headers.
ld/
* testsuite/ld-discard/extern.d: Remove m68hc12 xfail.
* testsuite/ld-discard/start.d: Likewise.
* testsuite/ld-discard/static.d: Likewise.
Replace two remaining spelled-out calls to `[istarget mips*-*-linux*]'
in `mips-elf.exp' with $linux_gnu, which is equivalent.
ld/
* testsuite/ld-mips-elf/mips-elf.exp: Replace remaining calls to
`[istarget mips*-*-linux*]' with $linux_gnu.
There is no need to generate x86 ISA properties with empty bits in
linker output.
bfd/
PR ld/23372
* elfxx-x86.c (_bfd_x86_elf_merge_gnu_properties): Remove x86
ISA properties with empty bits.
ld/
PR ld/23372
* testsuite/ld-i386/i386.exp: Run pr23372a and pr23372b.
* testsuite/ld-i386/pr23372a.d: New file.
* testsuite/ld-i386/pr23372a.s: Likewise.
* testsuite/ld-i386/pr23372b.d: Likewise.
* testsuite/ld-i386/pr23372b.s: Likewise.
* testsuite/ld-i386/pr23372c.s: Likewise.
* testsuite/ld-x86-64/pr23372a-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372a.d: Likewise.
* testsuite/ld-x86-64/pr23372a.s: Likewise.
* testsuite/ld-x86-64/pr23372b-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372b.d: Likewise.
* testsuite/ld-x86-64/pr23372b.s: Likewise.
* testsuite/ld-x86-64/pr23372c.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr23372a, pr23372a-x32,
pr23372b and pr23372b-x32.
And report the two input files that are incompatible rather than
reporting that an input file is incompatible with the output.
bfd/
* elf-bfd.h (_bfd_elf_ppc_merge_fp_attributes): Update prototype.
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): Return error
on mismatch. Remove "warning: " from messages. Track last bfd
used to set tags.
(ppc_elf_merge_obj_attributes): Likewise. Handle status from
_bfd_elf_ppc_merge_fp_attributes.
* elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Handle status
from _bfd_elf_ppc_merge_fp_attributes.
ld/
* testsuite/ld-powerpc/attr-gnu-4-12.d: Update expected output.
* testsuite/ld-powerpc/attr-gnu-4-13.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-21.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-23.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-31.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-12-21.d: Likewise.
Set non_ir_ref_regular to TRUE for symbols forced into the output file
so that they won't be removed by garbage collection with LTO.
PR ld/23309
* ldlang.c (insert_undefined): Set non_ir_ref_regular to TRUE.
* plugin.c (is_visible_from_outside): Don't scan entry_symbol.
* testsuite/ld-plugin/pr23309.c: New file.
* testsuite/ld-plugin/pr23309.d: Likewise.
We need to clear the R_X86_64_converted_reloc_bit bit after setting it
to avoid leaking it out by --emit-relocs.
bfd/
PR ld/23324
* elf64-x86-64.c (elf_x86_64_relocate_section): Clear the
R_X86_64_converted_reloc_bit bit.
ld/
PR ld/23324
* testsuite/ld-x86-64/pr23324.s: New file.
* testsuite/ld-x86-64/pr23324a.d: Likewise.
* testsuite/ld-x86-64/pr23324b.d: Likewise.
BFD's bfd_get_mach () function returns a bfd specific value representing
the architecture of the target which is populated from the Tag_CPU_arch
build attribute value of that target. Among other users of that
interfacem, objdump which uses it to print the architecture version of
the binary being examinated and to decide what instruction is available
if run with "-m arm" via its own mapping from bfd_mach_arm_X values to
feature bits available.
However, both BFD and objdump's most recent known architecture is
Armv5TE. When encountering a newer architecture bfd_get_mach will return
bfd_mach_arm_unknown. This is unfortunate since objdump uses that value
to allow all instructions on all architectures which is already what it
does by default, making the "-m arm" trick useless.
This patch updates BFD and objdump's knowledge of Arm architecture
versions up to the latest Armv8-M Baseline and Mainline, Armv8-R and
Armv8.4-A architectures. Since several architecture versions (eg. 8.X-A)
share the same Tag_CPU_arch build attribute value and
bfd_mach_arm values, the mapping from bfd machine value to feature bits
need to return the most featureful feature bits that would yield the
given bfd machine value otherwise some instruction would not disassemble
under "-m arm" mode. The patch rework that mapping to make this clearer
and simplify writing the mapping rules. In particular, for simplicity
all FPU instructions are allowed in all cases.
Finally, the patch also rewrite the cpu_arch_ver table in GAS to use the
TAG_CPU_ARCH_X macros rather than hardcode their value.
2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* archures.c (bfd_mach_arm_5TEJ, bfd_mach_arm_6, bfd_mach_arm_6KZ,
bfd_mach_arm_6T2, bfd_mach_arm_6K, bfd_mach_arm_7, bfd_mach_arm_6M,
bfd_mach_arm_6SM, bfd_mach_arm_7EM, bfd_mach_arm_8, bfd_mach_arm_8R,
bfd_mach_arm_8M_BASE, bfd_mach_arm_8M_MAIN): Define.
* bfd-in2.h: Regenerate.
* cpu-arm.c (arch_info_struct): Add entries for above new
bfd_mach_arm values.
* elf32-arm.c (bfd_arm_get_mach_from_attributes): Add Tag_CPU_arch to
bfd_mach_arm mapping logic for pre Armv4 and Armv5TEJ and later
architectures. Force assert failure for any new Tag_CPU_arch value.
gas/
* config/tc-arm.c (cpu_arch_ver): Use symbolic TAG_CPU_ARCH macros
rather than hardcode their values.
ld/
* arm-dis.c (select_arm_features): Fix typo in heading comment. Allow
all FPU features and add mapping from new bfd_mach_arm values to
allowed CPU feature bits.
opcodes/
* testsuite/ld-arm/tls-descrelax-be8.d: Add architecture version in
expected result.
* testsuite/ld-arm/tls-descrelax-v7.d: Likewise.
* testsuite/ld-arm/tls-longplt-lib.d: Likewise.
* testsuite/ld-arm/tls-longplt.d: Likewise.
The testcase isn't valid. If it happens to run on your target, you're
lucky.
PR 23169
* testsuite/ld-ifunc/ifunc.exp: Don't run pr23169 tests on
powerpc. Comment.
The addressable signed 32-bit range for n64 MIPS `.got.plt' references
is from 0xffffffff7fff8000 to 0x7fff7fff, due to how the composition of
an LUI and an LD instruction works for address calculation in the 64-bit
addressing mode, such as when CP0.Status.UX=1.
We currently have a range check in `mips_finish_exec_plt', however it is
not correct as it verifies that the `.got.plt' start address referred is
between 0xffffffff80000000 and 0x7fffffff. It is also implemented as an
assertion rather than a proper error message despite that the situation
can be triggered by user input. Additionally there is no check made for
individual `.got.plt' entries referred even though they can be out of
range while the `.got.plt' start address is not.
Fix all these problems and use the correct range for the check, limiting
it to n64 output files, and then issue a proper error message both in
`mips_finish_exec_plt' and in `_bfd_mips_elf_finish_dynamic_symbol',
suggesting the use of the `-Ttext-segment=...' option that will often
work and with the default linker scripts in particular. Add suitable
tests covering boundary cases.
bfd/
PR ld/22966
* elfxx-mips.c (_bfd_mips_elf_finish_dynamic_symbol): Verify the
`.got.plt' entry referred is in range.
(mips_finish_exec_plt): Correct the range check for `.got.plt'
start. Replace the assertion used for that with a proper error
message.
ld/
PR ld/22966
* testsuite/ld-mips-elf/n64-plt-1.dd: New test.
* testsuite/ld-mips-elf/n64-plt-1.gd: New test.
* testsuite/ld-mips-elf/n64-plt-2.ed: New test.
* testsuite/ld-mips-elf/n64-plt-3.ed: New test.
* testsuite/ld-mips-elf/n64-plt-4.dd: New test.
* testsuite/ld-mips-elf/n64-plt-4.gd: New test.
* testsuite/ld-mips-elf/n64-plt-1.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt-2.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt-3.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt-4.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt.s: New test source.
* testsuite/ld-mips-elf/n64-plt-lib.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Remove:
FAIL: DT_TEXTREL map file warning
introduced with commit 63c1f59d66 ("readonly_dynrelocs"), coming from
the lack of a "dynamic relocation against `foo' in read-only section
`.rodata'" warning message produced.
The cause of the failure is that for sections which have dynamic
relocations attached the MIPS backend sets SHF_WRITE, in
`mips_elf_create_dynamic_relocation', yielding:
$ readelf -S textrel.so | grep rodata
[ 8] .rodata PROGBITS 00000254 000254 000004 00 WA 0 0 1
$
so the section is read/write and therefore there is nothing to warn
about.
This arrangement came from commit 7403cb6305 ("PATCH for N32 ABI"),
<https://sourceware.org/ml/binutils/1999-q2/msg00375.html>, i.e. for all
practical purposes it has been there since forever, and therefore it can
be considered a part of the ABI and the test case irrelevant for MIPS
targets.
We don't have a clean way to request UNSUPPORTED result, which would be
the most appropriate here, so just XFAIL the test instead.
ld/
* testsuite/ld-elf/shared.exp: XFAIL DT_TEXTREL map file warning
test for `mips*-*-*'.
Plus a number of fixes to the pr23169 tests.
* testsuite/lib/ld-lib.exp (check_ifunc_available): Pass without
running executable when non-native.
(check_ifunc_attribute_available): Likewise.
* testsuite/ld-ifunc/pr23169a.rd: Remove extraneous lines. Match
st_other strings. Pass when func is an ifunc.
* testsuite/ld-ifunc/pr23169b.rd: Remove extraneous lines. Correct
reloc regexp. Correct match-anything line.
* testsuite/ld-ifunc/pr23169c.rd: Remove extraneous lines. Match
st_other strings.
Many ELF targets arrange to emit a number of section symbols in
.dynsym for use by dynamic relocations. This happens before the
dynamic relocations are output, and the need for those symbols
determined. In most cases they are not needed. A proper analysis of
the need for dynamic section symbols is target specific and tedious,
so this patch just excludes them in the obvious case when no
dynamic relocations are present.
The patch also runs the new pr23161 and pr23162 tests on more targets.
bfd/
* elf-bfd.h (struct elf_link_hash_table): Add "dynamic_relocs".
* elflink.c (_bfd_elf_init_2_index_sections): Comment fix.
(_bfd_elf_add_dynamic_entry): Set "dynamic_relocs".
(_bfd_elf_link_renumber_dynsyms): Exclude all section symbols when
"dynamic_relocs" is not set.
* elfxx-mips.c (count_section_dynsyms): Likewise.
ld/
* testsuite/ld-elf/readelf.exp: Delete DUMP and selection of
variant ver_def.vd.
* testsuite/ld-elf/ver_def-tic6x.vd: Delete.
* testsuite/ld-elf/shared.exp: Run most pr23161 and pr23162 tests for
linux, nacl and gnu targets.
* testsuite/ld-mips-elf/mips-elf.exp: Set base_syms to 1.
* testsuite/ld-elf/pr23161a.rd: Don't check reloc type. Allow any
order of __bss_start, _edata and _end.
* testsuite/ld-elf/pr23161b.rd: Don't check plt and dyn relocs.
Allow and order of __bss_start, _edata and _end.
* testsuite/ld-elf/pr23162.rd: Fail if __bss_start, _edata or _end
relocs are present rather than testing for no relocations.
* testsuite/ld-aarch64/gc-plt-relocs.d,
* testsuite/ld-aarch64/ifunc-1-local.d,
* testsuite/ld-aarch64/ifunc-1.d,
* testsuite/ld-aarch64/ifunc-2-local.d,
* testsuite/ld-aarch64/ifunc-2.d,
* testsuite/ld-aarch64/ifunc-21.d,
* testsuite/ld-aarch64/ifunc-3a.d,
* testsuite/ld-arm/farcall-mixed-lib-v4t.d,
* testsuite/ld-arm/farcall-mixed-lib.d,
* testsuite/ld-arm/gc-hidden-1.d,
* testsuite/ld-arm/tls-gdesc-got.d,
* testsuite/ld-arm/tls-lib-loc.d,
* testsuite/ld-arm/tls-longplt-lib.d,
* testsuite/ld-arm/tls-thumb1.d,
* testsuite/ld-cris/libdso-10.d,
* testsuite/ld-cris/libdso-11.d,
* testsuite/ld-cris/libdso-13b.d,
* testsuite/ld-cris/libdso-14.d,
* testsuite/ld-cris/libdso-15.d,
* testsuite/ld-cris/pic-gc-72.d,
* testsuite/ld-cris/pic-gc-73.d,
* testsuite/ld-cris/tls-gc-71.d,
* testsuite/ld-mips-elf/mips16-pic-4a.nd,
* testsuite/ld-mips-elf/pic-and-nonpic-3a.dd,
* testsuite/ld-mips-elf/pie-n32.d,
* testsuite/ld-mips-elf/pie-n64.d,
* testsuite/ld-mips-elf/pie-o32.d: Update for removed dynamic
section symbols.
See email thread starting here for more details:
https://sourceware.org/ml/binutils/2018-06/msg00036.html
PR 22983
* testsuite/ld-plugin/lto.exp: Use individual tests to check for
the presence of each expected symbol.
* testsuite/ld-plugin/pr22983.1.d: New file.
* testsuite/ld-plugin/pr22983.2.d: New file.
* testsuite/ld-plugin/pr22983.3.d: New file.
* testsuite/ld-plugin/pr22983.4.d: New file.
Adapt the existing regular MIPS lazy binding stub tests for microMIPS
code verification. Check both regular and `--insn32' variants.
Correct indentation issues in the conditional updated.
ld/
* testsuite/ld-mips-elf/stub-dynsym-micromips-1-7fff.d: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-1-8000.d: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-1-fff0.d: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-1-10000.d: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-1-2fe80.d: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-1-7fff.d:
New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-1-8000.d:
New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-1-fff0.d:
New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-1-10000.d:
New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-1-2fe80.d:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests. Fix
indentation.
There is no need to put hidden _edata, __bss_start, and _end in dynamic
symbol table in shared libraries.
bfd/
PR ld/23161
* elfxx-x86.c (elf_x86_hide_linker_defined): New function.
(_bfd_x86_elf_link_check_relocs): Use it to hide hidden
__bss_start, _end and _edata in shared libraries.
ld/
PR ld/23161
* testsuite/ld-elf/pr23161d.rd: Remove local _edata, __bss_start,
and _end from dynamic symbol table.
bfd_hide_sym_by_version can't be used to check if a versioned symbol is
hidden. This patch adds _bfd_elf_link_hide_sym_by_version to support
both versioned and unversioned symbols by extracting versioned symbol
check from _bfd_elf_link_assign_sym_version.
bfd/
PR ld/23194
* elf-bfd.h (_bfd_elf_link_hide_sym_by_version): New.
* elflink.c (_bfd_elf_link_hide_versioned_symbol): New function.
Extracted from _bfd_elf_link_assign_sym_version.
(_bfd_elf_link_hide_sym_by_version): New function.
(_bfd_elf_link_assign_sym_version): Use
_bfd_elf_link_hide_versioned_symbol.
* elfxx-x86.c (_bfd_x86_elf_link_symbol_references_local): Call
_bfd_elf_link_hide_sym_by_version instead of
bfd_hide_sym_by_version. Don't check unversioned symbol.
ld/
PR ld/23194
* testsuite/ld-i386/pr23194.d: Expect only R_386_GLOB_DAT
against foobar.
* testsuite/ld-i386/pr23194.map: Add foobar.
* testsuite/ld-x86-64/pr23194.map: Likewise.
* testsuite/ld-i386/pr23194.s: Add a common foobar symbol.
* testsuite/ld-x86-64/pr23194.s: Likewise.
* testsuite/ld-x86-64/pr23194.d: Expect only R_X86_64_GLOB_DAT
against foobar.
bfd_hide_sym_by_version can't be used to check if a versioned symbol is
hidden. It has to be synced with _bfd_elf_link_assign_sym_version to
get the correct answer.
bfd/
PR ld/23194
* elfxx-x86.c (_bfd_x86_elf_link_symbol_references_local): Don't
set eh->local_ref to 1 if a symbol is versioned and there is a
version script.
ld/
PR ld/23194
* testsuite/ld-i386/i386.exp: Run pr23194.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr23194.d: New file.
* testsuite/ld-i386/pr23194.map: Likewise.
* testsuite/ld-i386/pr23194.s: Likewise.
* testsuite/ld-x86-64/pr23194.d: Likewise.
* testsuite/ld-x86-64/pr23194.map: Likewise.
* testsuite/ld-x86-64/pr23194.s: Likewise.
Since the pr23189 test isn't Linux specific, run it for all targets.
* testsuite/ld-i386/i386.exp: Run pr23189 for all targets.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
bfd * Makefile.am: Add s12z files.
* Makefile.in: Regenerate.
* archures.c: Add bfd_s12z_arch.
* bfd-in.h: Add exports of bfd_putb24 and bfd_putl24.
* bfd-in2.h: Regenerate.
* config.bfd: Add s12z target.
* configure.ac: Add s12z target.
* configure: Regenerate.
* cpu-s12z.c: New file.
* elf32-s12z.c: New file.
* libbfd.c (bfd_putb24): New function.
(bfd_putl24): New function.
* libbfd.h: Regenerate.
* reloc.c: Add s12z relocations.
(bfd_get_reloc_size): Handle size 5 relocs.
* targets.c: Add s12z_elf32_vec.
opcodes * Makefile.am: Add support for s12z architecture.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* s12z-dis.c: New file.
* s12z.h: New file.
include * elf/s12z.h: New header.
ld * Makefile.am: Add support for s12z architecture.
* configure.tgt: Likewise.
* Makefile.in: Regenerate.
* emulparams/m9s12zelf.sh: New file.
* scripttempl/elfm9s12z.sc: New file.
* testsuite/ld-discard/static.d: Expect to fail for the s12z
target.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr14926.d: Skip for the s12z target.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-s12z: New directory.
* testsuite/ld-s12z/opr-linking.d: New file.
* testsuite/ld-s12z/opr-linking.s: New file.
* testsuite/ld-s12z/relative-linking.d: New file.
* testsuite/ld-s12z/relative-linking.s: New file.
* testsuite/ld-s12z/z12s.exp: New file.
gas * Makefile.am: Add support for s12z target.
* Makefile.in: Regenerate.
* NEWS: Mention the new support.
* config/tc-s12z.c: New file.
* config/tc-s12z.h: New file.
* configure.tgt: Add s12z support.
* doc/Makefile.am: Likewise.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add s12z documentation.
* doc/as.textinfo: Likewise.
* doc/c-s12z.texi: New file.
* testsuite/gas/s12z: New directory.
* testsuite/gas/s12z/abs.d: New file.
* testsuite/gas/s12z/abs.s: New file.
* testsuite/gas/s12z/adc-imm.d: New file.
* testsuite/gas/s12z/adc-imm.s: New file.
* testsuite/gas/s12z/adc-opr.d: New file.
* testsuite/gas/s12z/adc-opr.s: New file.
* testsuite/gas/s12z/add-imm.d: New file.
* testsuite/gas/s12z/add-imm.s: New file.
* testsuite/gas/s12z/add-opr.d: New file.
* testsuite/gas/s12z/add-opr.s: New file.
* testsuite/gas/s12z/and-imm.d: New file.
* testsuite/gas/s12z/and-imm.s: New file.
* testsuite/gas/s12z/and-opr.d: New file.
* testsuite/gas/s12z/and-opr.s: New file.
* testsuite/gas/s12z/and-or-cc.d: New file.
* testsuite/gas/s12z/and-or-cc.s: New file.
* testsuite/gas/s12z/bfext-special.d: New file.
* testsuite/gas/s12z/bfext-special.s: New file.
* testsuite/gas/s12z/bfext.d: New file.
* testsuite/gas/s12z/bfext.s: New file.
* testsuite/gas/s12z/bit-manip.d: New file.
* testsuite/gas/s12z/bit-manip.s: New file.
* testsuite/gas/s12z/bit.d: New file.
* testsuite/gas/s12z/bit.s: New file.
* testsuite/gas/s12z/bra-expression-defined.d: New file.
* testsuite/gas/s12z/bra-expression-defined.s: New file.
* testsuite/gas/s12z/bra-expression-undef.d: New file.
* testsuite/gas/s12z/bra-expression-undef.s: New file.
* testsuite/gas/s12z/bra.d: New file.
* testsuite/gas/s12z/bra.s: New file.
* testsuite/gas/s12z/brclr-symbols.d: New file.
* testsuite/gas/s12z/brclr-symbols.s: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file.
* testsuite/gas/s12z/clb.d: New file.
* testsuite/gas/s12z/clb.s: New file.
* testsuite/gas/s12z/clr-opr.d: New file.
* testsuite/gas/s12z/clr-opr.s: New file.
* testsuite/gas/s12z/clr.d: New file.
* testsuite/gas/s12z/clr.s: New file.
* testsuite/gas/s12z/cmp-imm.d: New file.
* testsuite/gas/s12z/cmp-imm.s: New file.
* testsuite/gas/s12z/cmp-opr-inc.d: New file.
* testsuite/gas/s12z/cmp-opr-inc.s: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.s: New file.
* testsuite/gas/s12z/cmp-opr-reg.d: New file.
* testsuite/gas/s12z/cmp-opr-reg.s: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.s: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.d: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.s: New file.
* testsuite/gas/s12z/cmp-opr-xys.d: New file.
* testsuite/gas/s12z/cmp-opr-xys.s: New file.
* testsuite/gas/s12z/cmp-s-imm.d: New file.
* testsuite/gas/s12z/cmp-s-imm.s: New file.
* testsuite/gas/s12z/cmp-s-opr.d: New file.
* testsuite/gas/s12z/cmp-s-opr.s: New file.
* testsuite/gas/s12z/cmp-xy.d: New file.
* testsuite/gas/s12z/cmp-xy.s: New file.
* testsuite/gas/s12z/com-opr.d: New file.
* testsuite/gas/s12z/com-opr.s: New file.
* testsuite/gas/s12z/complex-shifts.d: New file.
* testsuite/gas/s12z/complex-shifts.s: New file.
* testsuite/gas/s12z/db-tb-cc-opr.d: New file.
* testsuite/gas/s12z/db-tb-cc-opr.s: New file.
* testsuite/gas/s12z/db-tb-cc-reg.d: New file.
* testsuite/gas/s12z/db-tb-cc-reg.s: New file.
* testsuite/gas/s12z/dbCC.d: New file.
* testsuite/gas/s12z/dbCC.s: New file.
* testsuite/gas/s12z/dec-opr.d: New file.
* testsuite/gas/s12z/dec-opr.s: New file.
* testsuite/gas/s12z/dec.d: New file.
* testsuite/gas/s12z/dec.s: New file.
* testsuite/gas/s12z/div.d: New file.
* testsuite/gas/s12z/div.s: New file.
* testsuite/gas/s12z/eor.d: New file.
* testsuite/gas/s12z/eor.s: New file.
* testsuite/gas/s12z/exg.d: New file.
* testsuite/gas/s12z/exg.s: New file.
* testsuite/gas/s12z/ext24-ld-xy.d: New file.
* testsuite/gas/s12z/ext24-ld-xy.s: New file.
* testsuite/gas/s12z/inc-opr.d: New file.
* testsuite/gas/s12z/inc-opr.s: New file.
* testsuite/gas/s12z/inc.d: New file.
* testsuite/gas/s12z/inc.s: New file.
* testsuite/gas/s12z/inh.d: New file.
* testsuite/gas/s12z/inh.s: New file.
* testsuite/gas/s12z/jmp.d: New file.
* testsuite/gas/s12z/jmp.s: New file.
* testsuite/gas/s12z/jsr.d: New file.
* testsuite/gas/s12z/jsr.s: New file.
* testsuite/gas/s12z/ld-imm-page2.d: New file.
* testsuite/gas/s12z/ld-imm-page2.s: New file.
* testsuite/gas/s12z/ld-imm.d: New file.
* testsuite/gas/s12z/ld-imm.s: New file.
* testsuite/gas/s12z/ld-immu18.d: New file.
* testsuite/gas/s12z/ld-immu18.s: New file.
* testsuite/gas/s12z/ld-large-direct.d: New file.
* testsuite/gas/s12z/ld-large-direct.s: New file.
* testsuite/gas/s12z/ld-opr.d: New file.
* testsuite/gas/s12z/ld-opr.s: New file.
* testsuite/gas/s12z/ld-s-opr.d: New file.
* testsuite/gas/s12z/ld-s-opr.s: New file.
* testsuite/gas/s12z/ld-small-direct.d: New file.
* testsuite/gas/s12z/ld-small-direct.s: New file.
* testsuite/gas/s12z/lea-immu18.d: New file.
* testsuite/gas/s12z/lea-immu18.s: New file.
* testsuite/gas/s12z/lea.d: New file.
* testsuite/gas/s12z/lea.s: New file.
* testsuite/gas/s12z/mac.d: New file.
* testsuite/gas/s12z/mac.s: New file.
* testsuite/gas/s12z/min-max.d: New file.
* testsuite/gas/s12z/min-max.s: New file.
* testsuite/gas/s12z/mod.d: New file.
* testsuite/gas/s12z/mod.s: New file.
* testsuite/gas/s12z/mov.d: New file.
* testsuite/gas/s12z/mov.s: New file.
* testsuite/gas/s12z/mul-imm.d: New file.
* testsuite/gas/s12z/mul-imm.s: New file.
* testsuite/gas/s12z/mul-opr-opr.d: New file.
* testsuite/gas/s12z/mul-opr-opr.s: New file.
* testsuite/gas/s12z/mul-opr.d: New file.
* testsuite/gas/s12z/mul-opr.s: New file.
* testsuite/gas/s12z/mul-reg.d: New file.
* testsuite/gas/s12z/mul-reg.s: New file.
* testsuite/gas/s12z/mul.d: New file.
* testsuite/gas/s12z/mul.s: New file.
* testsuite/gas/s12z/neg-opr.d: New file.
* testsuite/gas/s12z/neg-opr.s: New file.
* testsuite/gas/s12z/not-so-simple-shifts.d: New file.
* testsuite/gas/s12z/not-so-simple-shifts.s: New file.
* testsuite/gas/s12z/opr-18u.d: New file.
* testsuite/gas/s12z/opr-18u.s: New file.
* testsuite/gas/s12z/opr-expr.d: New file.
* testsuite/gas/s12z/opr-expr.s: New file.
* testsuite/gas/s12z/opr-ext-18.d: New file.
* testsuite/gas/s12z/opr-ext-18.s: New file.
* testsuite/gas/s12z/opr-idx-24-reg.d: New file.
* testsuite/gas/s12z/opr-idx-24-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-reg.d: New file.
* testsuite/gas/s12z/opr-idx3-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.d: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.s: New file.
* testsuite/gas/s12z/opr-indirect-expr.d: New file.
* testsuite/gas/s12z/opr-indirect-expr.s: New file.
* testsuite/gas/s12z/opr-symbol.d: New file.
* testsuite/gas/s12z/opr-symbol.s: New file.
* testsuite/gas/s12z/or-imm.d: New file.
* testsuite/gas/s12z/or-imm.s: New file.
* testsuite/gas/s12z/or-opr.d: New file.
* testsuite/gas/s12z/or-opr.s: New file.
* testsuite/gas/s12z/p2-mul.d: New file.
* testsuite/gas/s12z/p2-mul.s: New file.
* testsuite/gas/s12z/page2-inh.d: New file.
* testsuite/gas/s12z/page2-inh.s: New file.
* testsuite/gas/s12z/psh-pul.d: New file.
* testsuite/gas/s12z/psh-pul.s: New file.
* testsuite/gas/s12z/qmul.d: New file.
* testsuite/gas/s12z/qmul.s: New file.
* testsuite/gas/s12z/rotate.d: New file.
* testsuite/gas/s12z/rotate.s: New file.
* testsuite/gas/s12z/s12z.exp: New file.
* testsuite/gas/s12z/sat.d: New file.
* testsuite/gas/s12z/sat.s: New file.
* testsuite/gas/s12z/sbc-imm.d: New file.
* testsuite/gas/s12z/sbc-imm.s: New file.
* testsuite/gas/s12z/sbc-opr.d: New file.
* testsuite/gas/s12z/sbc-opr.s: New file.
* testsuite/gas/s12z/shift.d: New file.
* testsuite/gas/s12z/shift.s: New file.
* testsuite/gas/s12z/simple-shift.d: New file.
* testsuite/gas/s12z/simple-shift.s: New file.
* testsuite/gas/s12z/single-ops.d: New file.
* testsuite/gas/s12z/single-ops.s: New file.
* testsuite/gas/s12z/specd6.d: New file.
* testsuite/gas/s12z/specd6.s: New file.
* testsuite/gas/s12z/st-large-direct.d: New file.
* testsuite/gas/s12z/st-large-direct.s: New file.
* testsuite/gas/s12z/st-opr.d: New file.
* testsuite/gas/s12z/st-opr.s: New file.
* testsuite/gas/s12z/st-s-opr.d: New file.
* testsuite/gas/s12z/st-s-opr.s: New file.
* testsuite/gas/s12z/st-small-direct.d: New file.
* testsuite/gas/s12z/st-small-direct.s: New file.
* testsuite/gas/s12z/st-xy.d: New file.
* testsuite/gas/s12z/st-xy.s: New file.
* testsuite/gas/s12z/sub-imm.d: New file.
* testsuite/gas/s12z/sub-imm.s: New file.
* testsuite/gas/s12z/sub-opr.d: New file.
* testsuite/gas/s12z/sub-opr.s: New file.
* testsuite/gas/s12z/tfr.d: New file.
* testsuite/gas/s12z/tfr.s: New file.
* testsuite/gas/s12z/trap.d: New file.
* testsuite/gas/s12z/trap.s: New file.
binutils* readelf.c: Add support for s12z architecture.
* testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z
targets.
Since symbols created by HIDDEN and PROVIDE_HIDDEN assignments in
linker script may be marked as defined, but not hidden, we can't
set eh->local_ref to 1 in _bfd_x86_elf_link_symbol_references_local.
Also R_386_GOT32X should be handled as just like R_386_GOT32 when
relocating a section. The input R_386_GOT32X relocations, which
can be relaxed, should have been converted to R_386_PC32, R_386_32
or R_386_GOTOFF.
bfd/
PR ld/23189
* elf32-i386.c (elf_i386_relocate_section): Handle R_386_GOT32X
like R_386_GOT32.
* elfxx-x86.c (_bfd_x86_elf_link_symbol_references_local): Don't
set eh->local_ref to 1 for linker defined symbols.
ld/
PR ld/23189
* testsuite/ld-i386/i386.exp: Run pr23189.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr23189.d: New file.
* testsuite/ld-i386/pr23189.s: Likewise.
* testsuite/ld-i386/pr23189.t: Likewise.
* testsuite/ld-x86-64/pr23189.d: Likewise.
* testsuite/ld-x86-64/pr23189.s: Likewise.
* testsuite/ld-x86-64/pr23189.t: Likewise.
gas * write.c (maybe_generate_build_notes): Generate notes on a
per-code-section basis. Skip linkonce sections.
ld * testsuite/ld-elf/notes.exp: New file: Run new test.
* testsuite/ld-elf/note1_1.s: New file: Source file for test.
* testsuite/ld-elf/note1_2.s: New file: Source file for test.
* testsuite/ld-elf/note1.r: New file: Expected readelf output.
If IFUNC symbol is defined in position-dependent executable, we should
change it to the normal function and set its address to its PLT entry
which should be resolved by R_*_IRELATIVE at run-time. All external
references should be resolved to its PLT in executable.
bfd/
PR ld/23169
* elf-ifunc.c (_bfd_elf_allocate_ifunc_dyn_relocs): Don't issue
an error on IFUNC pointer defined in PDE.
* elf32-i386.c (elf_i386_finish_dynamic_symbol): Call
_bfd_x86_elf_link_fixup_ifunc_symbol.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Likewise.
* elfxx-x86.c (_bfd_x86_elf_link_fixup_ifunc_symbol): New
function.
* elfxx-x86.h (_bfd_x86_elf_link_fixup_ifunc_symbol): New.
ld/
PR ld/23169
* testsuite/ld-ifunc/ifunc-9-i386.d: New file.
* testsuite/ld-ifunc/ifunc-9-x86-64.d: Likewise.
* testsuite/ld-ifunc/pr23169a.c: Likewise.
* testsuite/ld-ifunc/pr23169a.rd: Likewise.
* testsuite/ld-ifunc/pr23169b.c: Likewise.
* testsuite/ld-ifunc/pr23169b.c: Likewise.
* testsuite/ld-ifunc/pr23169c.rd: Likewise.
* testsuite/ld-ifunc/pr23169c.rd: Likewise.
* testsuite/ld-ifunc/ifunc-9-x86.d: Removed.
* testsuite/ld-ifunc/ifunc.exp: Run PR ld/23169 tests.
__bss_start, _end and _edata are defined by linker to mark regions
within executables and shared libraries. All references within
executables should be locally resolved.
This patch doesn't change how their references within shared libraries
are resolved.
bfd/
PR ld/23162
* elfxx-x86.c (elf_x86_linker_defined): New function.
(_bfd_x86_elf_link_check_relocs): Use it to mark __bss_start,
_end and _edata locally defined within executables.
ld/
PR ld/23162
* testsuite/ld-elf/pr23162.map: New file.
* testsuite/ld-elf/pr23162.rd: Likewise.
* testsuite/ld-elf/pr23162a.c: Likewise.
* testsuite/ld-elf/pr23162b.c: Likewise.
* testsuite/ld-elf/shared.exp: Run PR ld/23162 tests.
Sections may well belong in multiple segments. The testcase in the PR
saw an allocated section being assigned to an ABIFLAGS segment, then
not being assigned to a LOAD segment because it had already been
handled. To fix that particular problem this patch sets and tests
segment_mark only for LOAD segments. I kept the segment_mark test for
LOAD segments because I think there may otherwise be a problem with
zero size sections.
A few other problems showed up with the testcase. Some targets align
.dynamic, resulting in the test failing with "section .dynamic lma
0x800000c0 adjusted to 0x800000cc" and similar messages. I've tried
to handle that with some more hacks to the segment lma, which do the
right thing for the testcase, but may well fail in other situations.
I've also removed the tests of segment lma (p_paddr) and code involved
in deciding that an adjusted segment no longer covers the file or
program headers. Those test can't be correct in the face of objcopy
--change-section-lma. It may be necessary to reinstate the tests but
do them modulo page size, but we'll see how this goes.
PR 20659
bfd/
* elf.c (rewrite_elf_program_header): Use segment_mark only for
PT_LOAD headers. Delete first_matching_lma and first_suggested_lma.
Instead make matching_lma and suggested_lma pointers to the
sections. Align section vma and lma calculated from segment.
Don't clear includes_phdrs or includes_filehdr based on p_paddr
test. Try to handle alignment padding before first section by
adjusting new segment lma down. Adjust PT_PHDR map p_paddr.
ld/
* testsuite/ld-elf/changelma.d,
* testsuite/ld-elf/changelma.lnk,
* testsuite/ld-elf/changelma.s: New test.
My original implementation for LDI32 pseudo does not conform to
the TI ABI. I wrongly documented my TI PRU ELF object files inspection,
which got propagated into my binutils implementation.
Issue was exposed when running the GCC ABI testsuite against TI toolchain.
According to TI ABI, LDI32 must use first LDI instruction to load
the MSB 16bits, and second LDI instruction for the LSB 16bits.
This patch will break binary compatibility with previously released
binutils versions for PRU. Still, I think it is better to fix
binutils to conform to the chip vendor ABI.
bfd * elf32-pru.c (pru_elf32_do_ldi32_relocate): Make LDI32 relocation
conformant to TI ABI.
(pru_elf32_relax_section): Likewise.
(pru_elf_relax_delete_bytes): Fix offsets for new LDI32 code.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): Ignore addend.
(pru_elf32_pmem_relocate): Trap - should not get here.
(pru_elf32_relocate_section): Add support for REL relocations.
(elf_info_to_howto_rel): Enable REL.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
gas * config/tc-pru.c (md_apply_fix): Make LDI32 relocation conformant
to TI ABI.
(pru_assemble_arg_i): Likewise.
(output_insn_ldi32): Likewise.
* testsuite/gas/pru/ldi.d: Update test for the now fixed LDI32.
* gas/config/tc-pru.c (pru_assemble_arg_b): Check imm8 operand range.
* gas/testsuite/gas/pru/illegal2.l: New test.
* gas/testsuite/gas/pru/illegal2.s: New test.
* gas/testsuite/gas/pru/pru.exp: Register new illegal2 test.
ld * scripttempl/pru.sc: Add LD sections to allow linking TI
toolchain object files.
* scripttempl/pru.sc: Switch to init_array.
* testsuite/ld-pru/ldi32.d: Update LDI32 test to conform to TI ABI.
* testsuite/ld-pru/norelax_ldi32-data.d: Likewise.
* testsuite/ld-pru/norelax_ldi32-dis.d: Likewise.
* testsuite/ld-pru/relax_ldi32-data.d: Likewise.
* testsuite/ld-pru/relax_ldi32-dis.d: Likewise.
The _gp_disp is a magic symbol, always implicitly defined by the linker.
It does not make a sense to write it into symbol tables for output files.
Moreover, now if the linker gets a version script, the _gp_disp symbol
gets zero version definition index. The zero index means[1]:
"The symbol is local, not available outside the object."
But the _gp_disp symbol has GLOBAL binding. That confuses some tools
like for example the LLD linker when they get such files as inputs.
This patch fixes the problem - it prevents writing the _gp_disp symbol
in regular and dynamic symbol tables.
This was tested by running LD test suite on a mipsel-linux board.
References:
[1] "Linux Standard Base Specification", Section "10.7.2 Symbol
Version Table", p. 32
2018-05-03 Simon Atanasyan <simon@atanasyan.com>
bfd/
* elf32-mips.c: (elf32_mips_fixup_symbol): New function.
(elf_backend_fixup_symbol): New macro.
* elfxx-mips.c: (mips_elf_output_extsym): Discard _gp_disp
handling.
(_bfd_mips_elf_finish_dynamic_symbol): Likewise.
ld/
* testsuite/ld-mips-elf/gp-disp-sym.d: New test.
* testsuite/ld-mips-elf/gp-disp-sym.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
* testsuite/ld-mips-elf/mips16-pic-2.ad: Update for _gp_disp
symbol removal.
* testsuite/ld-mips-elf/mips16-pic-2.nd: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-3a.dd: Likewise.
* testsuite/ld-mips-elf/tlslib-o32-hidden.got: Likewise.
* testsuite/ld-mips-elf/tlslib-o32-ver.got: Likewise.
* testsuite/ld-mips-elf/tlslib-o32.got: Likewise.
Mark these `run_dump_test' cases across `ld-mips-elf/mips-elf.exp' that
are run unconditionally and require shared library support for exclusion
for targets that do not have such support, removing these failures:
FAIL: MIPS BAL/JALX in PIC mode
FAIL: microMIPS BAL/JALX in PIC mode
FAIL: MIPS BAL/JALX in PIC mode (ignore branch ISA)
FAIL: microMIPS BAL/JALX in PIC mode (ignore branch ISA)
FAIL: ld-mips-elf/hash1a
FAIL: ld-mips-elf/hash1b
FAIL: ld-mips-elf/hash1c
with `mipsel-ps2-elf' and `mips64el-ps2-elf' targets. Tests that are
guarded with `linux_gnu' will have to be reviewed separately.
ld/
* testsuite/ld-mips-elf/bal-jalx-pic.d: Only run for
`check_shared_lib_support' targets.
* testsuite/ld-mips-elf/bal-jalx-pic-n32.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-n64.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n32.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n64.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n32.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n64.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips.d:
Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n32.d:
Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n64.d:
Likewise.
* testsuite/ld-mips-elf/hash1a.d: Likewise.
* testsuite/ld-mips-elf/hash1b.d: Likewise.
* testsuite/ld-mips-elf/hash1c.d: Likewise.
* testsuite/ld-mips-elf/relax-jalr-n32-shared.d: Likewise.
* testsuite/ld-mips-elf/relax-jalr-n64-shared.d: Likewise.
Implement a more complex way of selecting targets to include or exclude
with `run_dump_test' cases, by extending the syntax for the `target',
`not-target', `skip' and `not-skip' options (with the binutils and GAS
test suites) and the `target', `alltargets' and `notarget' options (with
the LD test suite) to also accept a name of a TCL procedure instead of a
target triplet glob matching expression. The result, 1 or 0, of the
procedure determines whether the test is to be run or not. This mimics
and expands `dg-require-effective-target' from the GCC test suite.
Names of TCL procedures are supplied in square brackets `[]' as with TCL
procedure calls, observing that target triplet glob matching expressions
do not normally start and end with matching square brackets both at a
time. Arguments for procedures are allowed if required.
Having a way to specify a complex condition for a `run_dump_test' case
to run has the advantage of keeping it local within the test case itself
where tool options related to the check might be also present, removing
the need to wrap `run_dump_test' calls into an `if' block whose only
reason is to do a feature check, and ultimately lets one have the test
reported as UNSUPPORTED automagically if required (not currently
supported by the `run_dump_test' options used for LD).
binutils/
* testsuite/lib/binutils-common.exp (match_target): New procedure.
* testsuite/lib/utils-lib.exp (run_dump_test): Use it in place
of `istarget' for matching with `target', `not-target', `skip'
and `not-skip' options.
gas/
* testsuite/lib/gas-defs.exp (run_dump_test): Use `match_target'
in place of `istarget' for matching with `target', `not-target',
`skip' and `not-skip' options.
ld/
* testsuite/lib/ld-lib.exp (run_dump_test): Use `match_target'
in place of `istarget' for matching with `target', `alltargets'
and `notarget' options.
gcc configured using --with-ld always uses that particular version of
ld if it exists. This patch adds a check that the ld version reported
directly from ld-new matches that reported via gcc. I chose to
compare the ld --version output rather than a more strict test (for
example by gcc --print-prog-name=ld), because the version test allows
a user to run the ld testsuite after installing a new ld (in the place
expected by gcc).
Sample output:
Running target unix
Using /usr/share/dejagnu/baseboards/unix.exp as board description file for target.
Using /usr/share/dejagnu/config/unix.exp as generic interface file for target.
Using /home/alan/src/binutils-gdb/ld/testsuite/config/default.exp as tool-and-target-specific interface file.
ERROR: ************************************************************************
ERROR: Your compiler driver ignores -B when choosing ld.
ERROR: You will not be testing the new ld in many of the following tests.
ERROR: It seems you will be testing /usr/bin/x86_64-w64-mingw32-ld instead.
ERROR: ************************************************************************
WARNING: Assuming target board is the local machine (which is probably wrong).
You may need to set your DEJAGNU environment variable.
Running /home/alan/src/binutils-gdb/ld/testsuite/ld-aarch64/aarch64-elf.exp ...
* testsuite/lib/ld-lib.exp (run_host_cmd): Check that gcc -B
works.
max-page-size only matters for demand paged executables or shared
libraries, and the ideal size is the largest value used by your
operating system. Values larger than necessary just waste file space
and memory. common-page-size also affects file and memory size,
trading a possible small increase in file size for a decrease in
memory size when the operating system is using a common-page-size
page. With a powerpc max-page-size of 64k and common-page-size of 4k
many executables will use no more memory pages when the system page
size is 4k than an executable linked with -z max-page-size=0x1000,
yet will still run on a system using 64k pages. However, when running
on a system using 64k pages relro protection will not be completely
effective.
Due to the relro problem, powerpc binutils has been using a default
common-page-size of 64k since 2014-12-18 (git commit 04c6a44c7),
leading to complaints about increased file and memory sizes. People
not using relro do have a valid reason to complain..
So this patch introduces an extra back-end value to use as the default
for common-page-size when generating relro executables, and enables
the support for powerpc. Non relro executables will now be generated
with a default common-page-size of 4k.
bfd/
* elf-bfd.h (struct elf_backend_data): Add relropagesize.
* elfxx-target.h (ELF_RELROPAGESIZE): Provide default and
sanity test.
(elfNN_bed): Init relropagesize.
* bfd.c (bfd_emul_get_commonpagesize): Add boolean param to
select relropagesize.
* elf32-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
(ELF_MINPAGESIZE): Don't define.
* elf64-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
* bfd-in2.h: Regenerate.
ld/
* ldmain.c (main): Move config.maxpagesize and
config.commonpagesize initialization to..
* ldemul.c (after_parse_default): ..here.
* testsuite/ld-powerpc/ppc476-shared.d: Pass -z common-page-size.
* testsuite/ld-powerpc/ppc476-shared2.d: Likewise.
Necessary if gcc is to use PLT16 relocs to implement -mlongcall, and
there isn't a good technical reason why local symbols should be
excluded from PLT16 support. Non-ifunc local symbol PLT entries go in
a separate section to other PLT entries. In a fixed position
executable they won't need to be relocated, and in a PIE or shared
library I chose to not implement lazy relocation.
bfd/
* elf64-ppc.c (LOCAL_PLT_ENTRY_SIZE): Define.
(struct ppc_stub_hash_entry): Add symtype field.
(PLT_KEEP): Define.
(struct ppc_link_hash_table): Add pltlocal and relpltlocal.
(create_linkage_sections): Create pltlocal and relpltlocal.
(ppc64_elf_check_relocs): Allow PLT relocs on local symbols.
Set PLT_KEEP.
(ppc64_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls.
(allocate_dynrelocs): Allocate pltlocal and relpltlocal.
(ppc64_elf_size_dynamic_sections): Size pltlocal and relpltlocal.
Keep PLT entries for inline calls against locals.
(ppc_build_one_stub): Use pltlocal as appropriate.
(ppc_size_one_stub): Likewise.
(ppc64_elf_size_stubs): Set symtype.
(build_global_entry_stubs_and_plt): Init pltlocal and write
relpltlocal for globals.
(write_plt_relocs_for_local_syms): Likewise for local syms.
(ppc64_elf_relocate_section): Support PLT for local syms.
* elf32-ppc.c (PLT_KEEP): Define.
(struct ppc_elf_link_hash_table): Add pltlocal and relpltlocal.
(ppc_elf_create_glink): Create pltlocal and relpltlocal.
(ppc_elf_check_relocs): Allow PLT relocs on local symbols.
Set PLT_KEEP. Adjust update_local_sym_info call.
(ppc_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls.
(allocate_dynrelocs): Allocate pltlocal and relpltlocal.
(ppc_elf_size_dynamic_sections): Size pltlocal and relpltlocal.
(ppc_elf_relocate_section): Support PLT16 relocs for local syms.
(write_global_sym_plt): Init pltlocal and write relpltlocal.
(ppc_finish_symbols): Likewise for locals.
ld/
* emulparams/elf32ppc.sh (OTHER_RELRO_SECTIONS_2): Add .branch_lt.
(OTHER_GOT_RELOC_SECTIONS): Add .rela.branch_lt.
* testsuite/ld-powerpc/elfv2so.d: Update for symbol/stub reordering.
* testsuite/ld-powerpc/relbrlt.d: Likewise.
* testsuite/ld-powerpc/relbrlt.s: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlstocso.r: Likewise.
gold/
* powerpc.cc (Target_powerpc::lplt_): New variable.
(Target_powerpc::lplt_section): Associated accessor.
(Target_powerpc::plt_off): Handle local non-ifunc symbols.
(Target_powerpc::make_lplt_section): New function.
(Target_powerpc::make_local_plt_entry): New function.
(Powerpc_relobj::do_relocate_sections): Write out lplt.
(Output_data_plt_powerpc::first_plt_entry_offset): Zero for lplt.
(Output_data_plt_powerpc::add_local_entry): New function.
(Output_data_plt_powerpc::do_write): Ignore lplt.
(Target_powerpc::make_iplt_section): Make lplt first.
(Target_powerpc::make_brlt_section): Make .branch_lt relro.
(Target_powerpc::Scan::local): Handle PLT16 relocs.
Complement commit 86b24e15c4 ("MIPS/LD/testsuite: Correct
comm-data.exp test ABI/emul/endian arrangement") and set LD emulations
correctly for `mips*-*-kfreebsd*-gnu' targets in comm-data.exp, removing
test suite failures:
FAIL: MIPS o32/copyreloc common symbol override test (auxiliary shared object build)
FAIL: MIPS o32/copyreloc common symbol override test
FAIL: MIPS o32/nocopyreloc common symbol override test (auxiliary shared object build)
FAIL: MIPS o32/nocopyreloc common symbol override test
ld/
* testsuite/ld-mips-elf/comm-data.exp: Correct support for
`mips*-*-kfreebsd*-gnu' targets.
This patch adds the following relocation support into binutils bfd linker.
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC.
Those relocations includes both ip64 and ilp32 variant.
This is a regression for the corner case of a hidden symbol in a PIC/PIE
binary which is subject to both a new-style GOTDATA relocation and an
old-style GOT relocation. In this case, depending on the link order,
the R_SPARC_RELATIVE dynamic relocation for the GOT slot needed because
of the old-style relocation can be replaced with R_SPARC_NONE coming
from the GOTDATA relocation.
The fix simply records whether an old-style GOT relocation is seen for a
symbol and prevents the R_SPARC_NONE from being generated in this case.
bfd/
* elfxx-sparc.c (struct _bfd_sparc_elf_link_hash_entry): Add new flag
has_old_style_got_reloc.
(_bfd_sparc_elf_check_relocs) <GOT relocations>: Set it for old-style
relocations. Fix a couple of long lines.
(_bfd_sparc_elf_relocate_section) <R_SPARC_GOTDATA_OP>: Do not generate
a R_SPARC_NONE for the GOT slot if the symbol is also subject to
old-style GOT relocations.
ld/
* testsuite/ld-sparc/sparc.exp: Add test for mixed GOTDATA/GOT relocs.
* testsuite/ld-sparc/gotop-hidden.c: New file.
* testsuite/ld-sparc/got-hidden32.s: Likewise.
* testsuite/ld-sparc/got-hidden64.s: Likewise.
* testsuite/ld-sparc/pass.out: Likewise.
The TLSDESC entry in a lazy procedure linkage table is called indirectly
with "callq *(%rax)". This patch adds an ENDBR64 to support indirect
branch tracking in Intel CET. The TLSDESC PLT entry now looks like:
0xf3, 0x0f, 0x1e, 0xfa, /* endbr64 */
0xff, 0x35, 8, 0, 0, 0, /* pushq GOT+8(%rip) */
0xff, 0x25, 16, 0, 0, 0 /* jmpq *GOT+TDG(%rip) */
The BND prefix isn't needed since MPX isn't used for TLSDESC.
bfd/
PR ld/23000
* elf64-x86-64.c (elf_x86_64_finish_dynamic_sections): Add
ENDBR64 to the TLSDESC PLT entry.
ld/
PR ld/23000
* testsuite/ld-x86-64/tlsdesc.pd: Updated.
Complement commit 8988502d75 ("MIPS/LD/testsuite: Correct dynamic
links with VR4100, VR4300 and VR5000") and commit bf48520113 ("gc.exp:
Fix a typo: $LFLAGS -> $LDFLAGS"), and remove extraneous additional LD
flags explicitly passed to the personality test on invocation. This
passing has accidentally leaked from a WIP version of the former change.
With the actual version committed the $LDFLAGS global variable is used
instead for `run_dump_test' to use implicitly, so that `-call_shared'
precedes `-lpersonality' on the linker's command line, as otherwise a
shared `libpersonality.so' library wouldn't be considered for linking,
causing the test to fail.
ld/
* testsuite/ld-gc/gc.exp: Remove extraneous LD flags from the
personality test.
If a symbol is made dynamic by --dynamic-list, it has non-IR reference.
bfd/
PR ld/22983
* elflink.c (bfd_elf_link_mark_dynamic_symbol): Set
non_ir_ref_dynamic if a symbol is made dynamic by --dynamic-list.
ld/
PR ld/22983
* testsuite/ld-plugin/lto.exp: Run PR ld/22983 test.
* testsuite/ld-plugin/pr22983.d: New file.
* testsuite/ld-plugin/pr22983.t: Likewise.
* testsuite/ld-plugin/pr22983a.c: Likewise.
* testsuite/ld-plugin/pr22983b.c: Likewise.
Extend
commit b7c871edcd
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed May 17 07:57:15 2017 -0700
Mark debug sections referenced by kept debug sections
to handle the local debug definition section.
bfd/
PR ld/20882
* elflink.c (elf_gc_mark_debug_section): Also check the local
debug definition section.
ld/
PR ld/20882
* testsuite/ld-gc/pr20882.d: Also dump and check .debug_abbrev
section.
* testsuite/ld-gc/pr20882b.s: Add .debug_abbrev section.
Following on from PR 22929, I have found the same problem exists with
other ifunc supporting targets too. Plus see this link for the bug
being reported against the s390x binutils for Fedora rawhide:
https://bugzilla.redhat.com/show_bug.cgi?id=1553705
So I am going to check in the patch below which applies the same
change that H.J. made for the x86_64 target to the other affected
targets. (Specifically: S390, AArch64 and Sparc). Plus it adds a new
test to the linker testsuite to make sure that this problem stays
fixed.
bfd * elf64-s390.c (elf_s390_relocate_section): Move check for
relocations against non-allocated sections to before the code that
handles ifunc relocations.
* elf32-s390.c (elf_s390_relocate_section): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Treat
relocs against IFUNC symbols in non-allocated sections as relocs
against FUNC symbols.
* elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Likewise.
ld * testsuite/ld-ifunc/ifuncmod5.s: New test. Checks that targets
that support IFUNC symbols can handle relocations against those
symbols in NOTE sections.
* testsuite/ld-ifunc/ifuncmod5.d: New file: Driver for the new
test.
* testsuite/ld-ifunc/ifunc.exp: Run the new test.
When resolving a relocation against IFUNC symbol in a SHT_NOTE section
without SHF_ALLOC, we treat it as relocation against FUNC symbol since
it needs the address of IFUNC symbol, not the address returned by IFUNC
function.
bfd/
PR ld/22929
* elf32-i386.c (elf_i386_relocate_section): Treat relocation
against IFUNC symbol in SHT_NOTE section without SHF_ALLOC as
relocation against FUNC symbol.
* elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
ld/
PR ld/22929
* testsuite/ld-i386/i386.exp: Run PR ld/22929 test.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr22929.d: New file.
* testsuite/ld-i386/pr22929.s: Likewise.
* testsuite/ld-x86-64/pr22929.d: Likewise.
* testsuite/ld-x86-64/pr22929.s: Likewise.
For absolute symbols which are forced local or not dynamic, the ABS relocation
should be resolved at static linking time.
Originally, an RELATIVE/ABS relocation will be generated even for absolution
symbols for the dynamic linker to resolve.
bfd/
2018-03-07 Renlin Li <renlin.li@arm.com>
PR ld/20402
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Check absolute symbol,
and don't emit relocation in specific case.
ld/
2018-03-07 Renlin Li <renlin.li@arm.com>
PR ld/20402
* testsuite/ld-aarch64/aarch64-elf.exp: Run new test.
* testsuite/ld-aarch64/pr20402.s: New.
* testsuite/ld-aarch64/pr20402.d: New.
Currently, when `mips_elf_calculate_relocation' is asked to relocate an
undefined symbol, it reports an error or a warning and immediately
returns without performing the relocation. This is fine if the link
fails, but if unresolved_syms_in_objects == RM_GENERATE_WARNING, the
link will continue and output some unrelocated code, which is a
regression from commit e7e2196da3 ("MIPS/BFD: Correctly report
undefined relocations").
Fix this by continuing after calling the `undefined_symbol' hook unless
this is an error condition.
bfd/
PR ld/21900
* elfxx-mips.c (mips_elf_calculate_relocation): Only return
after calling `undefined_symbol' hook if this is an error
condition. Assume the value of 0 for the symbol requested
otherwise.
ld/
PR ld/21900
* testsuite/ld-mips-elf/undefined-warn.d: New test.
* testsuite/ld-mips-elf/undefined.s: Add padding at the end.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
More standarization of error/warning messages. The ARM backend has
some multi-line error messages, which don't fit particularly well with
the GNU coding standard insistence that error messages shouldn't be
capitalized or have a full-stop. I've replaced the line breaks with
semicolons.
So for instance the following
system/path/to/ld: myobject.o: invalid special symbol `foo'.
system/path/to/ld: It must be a global or weak function symbol.
becomes
system/path/to/ld: myobject.o: invalid special symbol `foo'; it must be a global or weak function symbol
bfd/
* elf32-arm.c, * elfnn-aarch64.c: Standardize error/warning messages.
ld/
* testsuite/ld-aarch64/reloc-overflow-bad.d,
* testsuite/ld-arm/attr-merge-9.out,
* testsuite/ld-arm/attr-merge-arch-2.d,
* testsuite/ld-arm/attr-merge-unknown-1.d,
* testsuite/ld-arm/attr-merge-unknown-2.d,
* testsuite/ld-arm/attr-merge-unknown-2r.d,
* testsuite/ld-arm/attr-merge-unknown-3.d,
* testsuite/ld-arm/cmse-implib-errors.out,
* testsuite/ld-arm/cmse-new-earlier-later-implib.out,
* testsuite/ld-arm/cmse-new-implib-no-output.out,
* testsuite/ld-arm/cmse-new-implib-not-sg-in-implib.out,
* testsuite/ld-arm/cmse-new-implib.out,
* testsuite/ld-arm/cmse-new-wrong-implib.out,
* testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out,
* testsuite/ld-arm/cmse-veneers-wrong-entryfct.out,
* testsuite/ld-arm/group-relocs-alu-bad-2.d,
* testsuite/ld-arm/group-relocs-alu-bad.d,
* testsuite/ld-arm/group-relocs-ldc-bad-2.d,
* testsuite/ld-arm/group-relocs-ldc-bad.d,
* testsuite/ld-arm/group-relocs-ldr-bad-2.d,
* testsuite/ld-arm/group-relocs-ldr-bad.d,
* testsuite/ld-arm/group-relocs-ldrs-bad-2.d,
* testsuite/ld-arm/group-relocs-ldrs-bad.d,
* testsuite/ld-arm/stm32l4xx-cannot-fix-far-ldm.d: Update.
The GNU coding standard says error messages should be of the form
program:sourcefile:lineno: message
or
program: message
and
"The string message should not begin with a capital letter when it
follows a program name and/or file name, because that isn’t the
beginning of a sentence. (The sentence conceptually starts at the
beginning of the line.) Also, it should not end with a period."
This patch does that for ppc, and removes some British spelling.
I've also switched some error output from using the linker callback
einfo to _bfd_error_handler, due to improved compilation time
argument checking now done for the latter function.
bfd/
* elf32-ppc.c: Standardize error/warning messages. Use
_bfd_error_handler rather than einfo when einfo features not used.
* elf64-ppc.c: Likewise.
ld/
* testsuite/ld-powerpc/attr-gnu-12-21.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-12.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-13.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-21.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-23.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-31.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Update.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Update.
Use the SEC_FIXED_SIZE flag to actually fix the size of `.reginfo' and
`.MIPS.abiflags' sections in `_bfd_mips_elf_always_size_sections', as
originally intended, removing link failures such as:
ld: final link failed: Section has no contents
or:
ld: final link failed: Bad value
or:
ld: foo: .reginfo section size should be 24 bytes, actual size is 32
and assertion failures like:
ld: BFD (GNU Binutils) 2.30.51.20180131 assertion fail .../bfd/elfxx-mips.c:14322
in link scenarios involving a linker script that either creates an
output `.reginfo' or `.MIPS.abiflags' section from scratch or produces
either section from different sections. If such an output section's
size turns out to be incorrect according to the psABI, then the section
is either truncated or padded out to the correct size, as relevant.
This allows people to handle these sections in a link in an unusual way,
while still addressing the issue covered by commit 58807c48a5
("_bfd_mips_elf_final_link: Notify user about wrong .reginfo size").
The original arrangement, coming from an unindentified change made to
what was called `mips_elf_always_size_sections' back then, between
commit 02650bd0a9 ("This adds ABI flags to MIPS/ELF object files.")
and commit 252b5132c7 ("19990502 sourceware import"), also missing
from BFD ChangeLog files, assumed that the output section size is not
going to change after return from `bfd_elf_size_dynamic_sections', the
caller of that function, called in turn from `ldemul_before_allocation'
via `gld${EMULATION_NAME}_before_allocation' in ld/emultempl/elf32.em,
and ultimately from `lang_process'. This is because later on in
`lang_process' processing `lang_size_sections' is called , happily
recalculating the section size, and it has actually already been the
case at the time of commit 252b5132c7 ("19990502 sourceware import"),
so the assumption was clearly incorrect right from the beginning.
bfd/
* elfxx-mips.c (_bfd_mips_elf_always_size_sections): Set
SEC_FIXED_SIZE and SEC_HAS_CONTENTS flags for `.reginfo' and
`.MIPS.abiflags' sections.
(_bfd_mips_elf_final_link): Avoid reading beyond `.reginfo'
section's end.
ld/
* testsuite/ld-mips-elf/reginfo-0.d: New test.
* testsuite/ld-mips-elf/reginfo-0r.d: New test.
* testsuite/ld-mips-elf/reginfo-1.d: New test.
* testsuite/ld-mips-elf/reginfo-1r.d: New test.
* testsuite/ld-mips-elf/reginfo-2.d: New test.
* testsuite/ld-mips-elf/reginfo-2r.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-0.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-0r.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-1.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-1r.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-2.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-2r.d: New test.
* testsuite/ld-mips-elf/reginfo-0.ld: New test linker script.
* testsuite/ld-mips-elf/reginfo-1.ld: New test linker script.
* testsuite/ld-mips-elf/mips-abiflags-0.ld: New test linker
script.
* testsuite/ld-mips-elf/mips-abiflags-1.ld: New test linker
script.
* testsuite/ld-mips-elf/reginfo-1.s: New test source.
* testsuite/ld-mips-elf/reginfo-2.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
ld-elf/ehdr_start fails with -z separate-code. Since there is no data
LOAD segment before code LOAD segment:
There are 2 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x200000 0x0000000000600000 0x0000000000600000 0x000010 0x000010 R E 0x200000
LOAD 0x400000 0x0000000000800000 0x0000000000800000 0x000008 0x000008 R 0x200000
Section to Segment mapping:
Segment Sections...
00 .text
01 .rodata
the program header isn't included in any LOAD segment. As the result,
reference to __ehdr_start is resolved to zero. Pass --build-id to ld
to add a data LOAD segment before code LOAD segment to put the program
header in the data LOAD segment.
PR ld/22845
* testsuite/ld-elf/ehdr_start.d: Pass --build-id to ld.
-z separate-code creates separate code LOAD segment, aligns it to the
maximum page size and places .plt section before .text section. But
ld-elf/eh4 passes -Ttext 0x400 to linker to place .text section at
address 0x400, which is impossible for linker to accomplish:
$ ld -shared -Ttext 0x400 -z separate-code -o x.so eh4.o
ld: section .eh_frame LMA [0000000000200000,000000000020006b] overlaps section .plt LMA [0000000000200000,000000000020001f]
Since ld-elf/eh4 also checks exact addresses, this patch passes
-z max-page-size=0x200000 -z noseparate-code to ld.
PR ld/22845
* ld-elf/eh4.d: Pass -z max-page-size=0x200000 -z noseparate-code
to ld.
"-z separate-code" generates different addresses. Update these tests
to accept any addresses.
* testsuite/ld-x86-64/bnd-ifunc-1.d: Updated.
* testsuite/ld-x86-64/ilp32-4.d: Likewise.
Add -z noseparate-code -z max-page-size=0x200000 since these tests
check for exact addresses and don't expect extra PT_LOAD segment. But
don't add them to nacl targets since they generate different addresses.
* testsuite/ld-x86-64/x86-64.exp: Add -z noseparate-code
-z max-page-size=0x200000, excluding NaCl target.
These tests fail due to one extra PT_LOAD segment with -z separate-code.
* testsuite/ld-elf/pr19162.d: Add -z noseparate-code.
* testsuite/ld-elf/textaddr1.d: Likewise.
* testsuite/ld-elf/textaddr2.d: Likewise.
* testsuite/ld-elf/textaddr4.d: Likewise.
* testsuite/ld-elf/textaddr6.d: Likewise.
bfd/
* elfnn-riscv.c (riscv_elf_relocate_section): Use bfd_reloc_dangerous
when pcrel_lo reloc has an addend. Use reloc_dangerous callback for
bfd_reloc_dangerous. Use einfo instead of warning callback for errors.
Add %X%P to error messages.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run pcrel-lo-addend test.
* testsuite/ld-riscv-elf/pcrel-lo-addend.d: New.
* testsuite/ld-riscv-elf/pcrel-lo-addend.s: New.
Since PLT in PDE and PC-relative PLT in PIE can be used as function
address, there is no need for dynamic PC-relative relocation against
a dynamic function definition in PIE. Linker should resolve PC-relative
reference to its PLT address.
NB: i386 has non-PIC PLT and PIC PLT. Only non-PIC PLT in PDE can
be used as function address. PIC PLT in PIE can't be used as
function address.
bfd/
PR ld/22842
* elf32-i386.c (elf_i386_check_relocs): Pass FALSE for non
PC-relative PLT to NEED_DYNAMIC_RELOCATION_P.
* elf64-x86-64.c (elf_x86_64_check_relocs): Create PLT for
R_X86_64_PC32 reloc against dynamic function in data section.
Pass TRUE for PC-relative PLT to NEED_DYNAMIC_RELOCATION_P.
(elf_x86_64_relocate_section): Use PLT for R_X86_64_PC32 reloc
against dynamic function in data section.
* elfxx-x86.c (elf_x86_allocate_dynrelocs): Use PLT in PIE as
function address only if pcrel_plt is true.
(_bfd_x86_elf_link_hash_table_create): Set pcrel_plt.
* elfxx-x86.h (NEED_DYNAMIC_RELOCATION_P): Add PCREL_PLT for
PC-relative PLT. If PLT is PC-relative, don't generate dynamic
PC-relative relocation against a function definition in data
secton in PIE. Remove the obsolete comments.
(elf_x86_link_hash_table): Add pcrel_plt.
ld/
PR ld/22842
* testsuite/ld-i386/i386.exp: Run PR ld/22842 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr22842a.c: New file.
* testsuite/ld-i386/pr22842b.S: Likewise.
* testsuite/ld-x86-64/pr22842a.c: Likewise.
* testsuite/ld-x86-64/pr22842a.rd: Likewise.
* testsuite/ld-x86-64/pr22842b.S: Likewise.
* testsuite/ld-x86-64/pr22842b.rd: Likewise.
They should be pr22393-3a.so and pr22393-3a-now.so, not pr22393-2a.so
and pr22393-2a-now.so. Since ld-elf/shared.exp creates pr22393-2a.so
and pr22393-2a-now.so, we won't notice the problem if x86-64.exp runs
after ld-elf/shared.exp.
* testsuite/ld-x86-64/x86-64.exp: Replace pr22393-2a.so and
pr22393-2a-now.so with pr22393-3a.so and pr22393-3a-now.so.
Since there is no need to prepare for PLT branch on x86-64, generate
R_X86_64_PLT32, instead of R_X86_64_PC32, if possible, which can be
used as a marker for 32-bit PC-relative branches.
To compile Linux kernel, this patch:
From: "H.J. Lu" <hjl.tools@gmail.com>
Subject: [PATCH] x86: Treat R_X86_64_PLT32 as R_X86_64_PC32
On i386, there are 2 types of PLTs, PIC and non-PIC. PIE and shared
objects must use PIC PLT. To use PIC PLT, you need to load
_GLOBAL_OFFSET_TABLE_ into EBX first. There is no need for that on
x86-64 since x86-64 uses PC-relative PLT.
On x86-64, for 32-bit PC-relative branches, we can generate PLT32
relocation, instead of PC32 relocation, which can also be used as
a marker for 32-bit PC-relative branches. Linker can always reduce
PLT32 relocation to PC32 if function is defined locally. Local
functions should use PC32 relocation. As far as Linux kernel is
concerned, R_X86_64_PLT32 can be treated the same as R_X86_64_PC32
since Linux kernel doesn't use PLT.
is needed. It is available on hjl/plt32/master branch at
https://github.com/hjl-tools/linux
bfd/
PR gas/22791
* elf64-x86-64.c (is_32bit_relative_branch): Removed.
(elf_x86_64_relocate_section): Check PIC relocations in PIE.
Remove is_32bit_relative_branch usage. Disallow PC32 reloc
against protected function in shared object.
gas/
PR gas/22791
* config/tc-i386.c (need_plt32_p): New function.
(output_jump): Generate BFD_RELOC_X86_64_PLT32 if possible.
(md_estimate_size_before_relax): Likewise.
* testsuite/gas/i386/reloc64.d: Updated.
* testsuite/gas/i386/x86-64-jump.d: Likewise.
* testsuite/gas/i386/x86-64-mpx-branch-1.d: Likewise.
* testsuite/gas/i386/x86-64-mpx-branch-2.d: Likewise.
* testsuite/gas/i386/x86-64-relax-2.d: Likewise.
* testsuite/gas/i386/x86-64-relax-3.d: Likewise.
* testsuite/gas/i386/ilp32/reloc64.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-branch.d: Likewise.
ld/
PR gas/22791
* testsuite/ld-x86-64/mpx1c.rd: Updated.
* testsuite/ld-x86-64/pr22791-1.err: New file.
* testsuite/ld-x86-64/pr22791-1a.c: Likewise.
* testsuite/ld-x86-64/pr22791-1b.s: Likewise.
* testsuite/ld-x86-64/pr22791-2.rd: Likewise.
* testsuite/ld-x86-64/pr22791-2a.s: Likewise.
* testsuite/ld-x86-64/pr22791-2b.c: Likewise.
* testsuite/ld-x86-64/pr22791-2c.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/22791 tests.
This fixes the case where all of a group is removed with ld -r, the
situation in the PR, and failures where part of a group is removed
that contain relocs.
bfd/
PR 22836
* elf.c (_bfd_elf_fixup_group_sections): Account for removed
relocation sections. If size reduces to just the flag word,
remove that too and mark with SEC_EXCLUDE.
* elflink.c (bfd_elf_final_link): Strip empty group sections.
binutils/
* testsuite/binutils-all/group-7.s,
* testsuite/binutils-all/group-7a.d,
* testsuite/binutils-all/group-7b.d,
* testsuite/binutils-all/group-7c.d: New tests.
* testsuite/binutils-all/objcopy.exp: Run them.
ld/
* testsuite/ld-elf/pr22836-2.d,
* testsuite/ld-elf/pr22836-2.s: New test.
lld lays out the relro segment differently to GNU ld, not bothering to
include the first few bytes of .got.plt and padding out to a page at
the end of the segment. This patch teaches binutils to recognize the
different (and somewhat inferior) layout as valid.
bfd/
PR 22829
* elf.c (assign_file_positions_for_non_load_sections): Rewrite
PT_GNU_RELRO setup.
ld/
* testsuite/ld-x86-64/pr14207.d: Adjust relro p_filesz.
This reverts most of commit 1be5d8d3bb.
Left in place are addition of --no-plt-align to some ppc32 ld tests
and the ld.texinfo --no-plt-thread-safe fix.
