(symfile.h, objfiles.h, xcoffsolib.h): Include.
(vmap): New global variable.
(exec_close): Close and free objects in vmap chain.
(exec_file_command) [IBM6000_TARGET]: Set up initial vmap.
(bfdsec_to_vmap, map_vmap): Moved here from xcoffexec.c.
(exec_files_info): Print vmap information.
* xcoffexec.c: Remove.
* config/rs6000/rs6000.mt, config/rs6000/rs6000lynx.mt
(TDEPFILES): Use exec.o instead of xcoffexec.o.
* TODO: Remove pertinent items.
rather than explicitly adding the frag address.
* config/obj-coff.c (coff_frob_symbol): Add a zero entry to mark
the end of the line numbers; this replaces the zero entry which
used to be added by coff_add_linesym, removed Oct 7.
(coff_adjust_section_syms): Ignore sections with no seginfo.
Update the RS/6000 assembler for recent gas changes.
* elf32-i386.c (elf_i386_check_relocs): Make sure that a symbol
with a global offset table entry or a procedure linkage table
entry is added to the dynamic symbol table.
* elf32-sparc.c (elf32_sparc_check_relocs): Likewise.
* elf32-i386.c (elf_i386_adjust_dynamic_symbol): If a symbol has
already gotten a procedure linkage table entry, change the
definition to the PLT entry.
* elf32-sparc.c (elf32_sparc_adjust_dynamic_symbol): Likewise.
Lynx wait status.
(fetch_core_registers): Don't try to fetch a register if
regmap maps it to -1.
* sparc-tdep.c (sparc_frame_find_saved_regs): Use FRAME_SAVED_I0
and FRAME_SAVED_L0 when setting saved_regs_addr. SPARC Lynx
stores the registers in a weird order.
These patches make SPARC Lynx gdb usable, though it still has problems.
type.
(coff_read_string_table): Cast argument to bfd_h_get_32 to correct type.
* elfcode.h (elf_link_output_extsym): Cast argument to bfd_elf_hash to correct
type.
* symfile.h (ADD_PSYMBOL_VT_TO_LIST),
symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):
No longer demangle partial symbols.
* symtab.c (lookup_symbol, list_symbols): Handle mangled
variables, e.g. C++ static members, via the minimal symbols.
Handle reordered functions in an objfile, for Irix 5.2 shared
libraries.
* objfiles.h (OBJF_REORDERED): New bit in the objfile flags,
set if the functions in an objfile are reordered.
* mdebugread.c (parse_partial_symbols): Detect reordered
functions in an objfile.
* symtab.c (find_pc_psymtab, find_pc_symtab): Use expensive
lookup algorithm if the functions in the objfile are reordered.
* xcoffexec.c (exec_close): If the current target has a copy
of the exec_ops sections, reflect the freeing of the sections
in current_target.
* valops.c (call_function_by_hand): Use `sizeof dummy1', not
`sizeof dummy', for constructing the call dummy code.
* config/sparc/tm-sparc.h: Add PARAMS declarations to all
function declarations.
* sparc-tdep.c (sparc_pop_frame): Cast result of
read_memory_integer to CORE_ADDR when passing it to PC_ADJUST.
* irix5-nat.c (enable_break): Set breakpoint at the entry point
of the executable, to handle the case where main resides in a
shared library.
* irix5-nat.c (solib_create_inferior_hook): Reset stop_soon_quietly
after shared library symbol reading, to get rid of a warning from
heuristic_proc_start if the startup code has no symbolic debug info.
* breakpoint.h (struct breakpoint): Add new fields language
and input_radix, to enable breakpoint resetting with the
proper language and radix.
* breakpoint.c (set_raw_breakpoint): Initialize them.
(breakpoint_re_set_one): Use them when resetting the breakpoint.
(breakpoint_re_set): Preserve current language and input_radix
across breakpoint_re_set_one calls.
* symtab.c (decode_line_1): Do not build a canonical line
specification for `*expr' line specifications.
* breakpoint.h (bpstat_stop_status): Fix prototype declaration.
and stack pointer during stepping, to speed things up.
A. Changes to not select a frame until we need a selected frame:
* blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
* infrun.c (wait_for_inferior): Move call to select_frame back to
normal_stop. This reverts a change of 13 Apr 94 (it says Jeff
Law, but the change was my idea); the only reason for that change
was so we could save and restore the selected frame in
wait_for_inferior, and now that flush_cached frames clears the
selected frame, that should work OK now.
B. Changes to not create a current_frame until we need one:
* blockframe.c (get_current_frame): If current_frame is NULL, try
to create an innermost frame.
* sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
infrun.c (wait_for_inferior), thread.c (thread_switch),
convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
i960-tdep.c (pop_frame), m68k-tdep.c
(m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
(push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
(pop_frame), config/arm/tm-arm.h (POP_FRAME),
config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
(POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
(POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
call create_new_frame.
* corelow.c (core_open), altos-xdep.c (core_file_command),
arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
m3-nat.c (select_thread), sun386-nat.c (core_file_command),
umax-xdep.c (core_file_command): Don't call create_new_frame; do
call flush_cached_frames.
* blockframe.c (reinit_frame_cache): Don't call create_new_frame
or select_frame.
C. Changes to get rid of stop_frame_address and instead only
fetch the frame pointer when we need it.
* breakpoint.c (bpstat_stop_status): Remove argument
frame_address; use FRAME_FP (get_current_frame ()).
* infrun.c (wait_for_inferior): Don't pass frame pointer to
bpstat_stop_status.
* infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
()) instead of stop_frame_address.
* infrun.c (save_inferior_status, restore_inferior_status),
inferior.h (struct inferior_status): Don't save and restore
stop_frame_address.
* inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
(select_thread): Remove stop_frame_address and uses thereof.
D. Same thing for the stack pointer.
* infrun.c (wait_for_inferior): Remove stop_sp and replace
uses thereof with read_sp ().
E. Change to eliminate one nasty little spot where we were
wanting to know the frame pointer from before the current step
(idea from GDB 3.5, which saved my ass, because my other ideas of
how to fix it were very baroque).
* infrun.c: Remove prev_frame_address.
* infrun.c (wait_for_inferior, step_over_function): Use
step_frame_address instead of prev_frame_address.
F. Same basic idea for the stack pointer.
* inferior.h, infcmd.c: New variable step_sp.
* infcmd.c (step_1, until_next_command): Set it.
* infrun.c: Remove prev_sp and replace uses by step_sp.
* infrun.c (wait_for_inferior): If we get out of the step
range, then set step_sp to the current stack pointer before we
start going again.
both it and TC_M88K.
(coff_adjust_section_syms): New function.
(coff_frob_section): For non-empty sections, create aux entry for the section
symbol, indicating the size.
(n_line_nos): New variable.
(add_lineno): Increment it.
(coff_add_linesym): Increment n_line_nos, don't call add_lineno.
(coff_frob_file): New function; map coff_adjust_section_syms over sections.
(obj_coff_line): Only reset line_base for .bf symbols.
* config/obj-coff.h (coff_adjust_section_syms, coff_frob_file): Declare.
(obj_frob_file): New macro.
* config/obj-coff.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Renamed from
obj_frob_forward_symbol, and rewritten for new parameter list.
