It has only a single use and can easily be represented by dq_mode
instead. Plus its handling in intel_operand_size() was duplicating
that of vex_vsib_{d,q}_w_dq_mode anyway.
Unlike the high bit of VEX.vvvv / EVEX.vvvv, EVEX.V' is not ignored
outside of 64-bit mode. Oddly enough there already are tests for these
cases, but their expectations were wrong. (This may have been based on
an old SDM version, where the restriction wasn't properly spelled out.)
What so far was OP_E_register() can be easily reused also for OP_G().
Add suitable parameters to the function and move the invocation of
swap_operand() to OP_E(). Adjust MOVSXD's first operand: There never was
a need to use movsxd_mode there, and its use gets in the way of the code
folding.
With EVEX.W clear the instruction doesn't ignore the rounding mode, but
(like for other insns without rounding semantics) EVEX.b set causes #UD.
Hence the handling of EVEX.W needs to be done when processing
evex_rounding_64_mode, not at the decode stages.
Derive a new 64-bit testcase from the 32-bit one to cover the different
EVEX.W treatment in both cases.
When running test-case gdb.cp/step-and-next-inline.exp with gcc-11, I run
into:
...
KPASS: gdb.cp/step-and-next-inline.exp: no_header: next step 1 \
(PRMS symtab/25507)
FAIL: gdb.cp/step-and-next-inline.exp: no_header: next step 2
KPASS: gdb.cp/step-and-next-inline.exp: no_header: next step 3 \
(PRMS symtab/25507)
...
[ Note that I get the same result with gcc-11 and target board
unix/gdb:debug_flags=-gdwarf-4, so this is not a dwarf 4 vs 5 issue. ]
With gcc-10, I have this trace:
...
64 get_alias_set (&xx);
get_alias_set (t=0x601038 <xx>) at step-and-next-inline.cc:51
51 if (t != NULL
40 if (t->x != i)
52 && TREE_TYPE (t).z != 1
43 return x;
53 && TREE_TYPE (t).z != 2
43 return x;
54 && TREE_TYPE (t).z != 3)
43 return x;
main () at step-and-next-inline.cc:65
65 return 0;
...
and with gcc-11, I have instead:
...
64 get_alias_set (&xx);
get_alias_set (t=0x601038 <xx>) at step-and-next-inline.cc:51
51 if (t != NULL
52 && TREE_TYPE (t).z != 1
43 return x;
53 && TREE_TYPE (t).z != 2
43 return x;
54 && TREE_TYPE (t).z != 3)
43 return x;
main () at step-and-next-inline.cc:65
65 return 0;
...
and with clang-10, I have instead:
...
64 get_alias_set (&xx);
get_alias_set (t=0x601034 <xx>) at step-and-next-inline.cc:51
51 if (t != NULL
52 && TREE_TYPE (t).z != 1
53 && TREE_TYPE (t).z != 2
54 && TREE_TYPE (t).z != 3)
51 if (t != NULL
57 }
main () at step-and-next-inline.cc:65
65 return 0;
...
The test-case tries to verify that we don't step into inlined function
tree_check (lines 40-43) (so, with the clang trace we get that right).
The test-case then tries to kfail the problems when using gcc, but this is
done in such a way that the testing still gets out of sync after a failure.
That is: the "next step 2" check that is supposed to match
"TREE_TYPE (t).z != 2" is actually matching "TREE_TYPE (t).z != 1":
...
(gdb) next^M
52 && TREE_TYPE (t).z != 1^M
(gdb) PASS: gdb.cp/step-and-next-inline.exp: no_header: next step 2
...
Fix this by issuing extra nexts to arrive at the required lines.
Tested on x86_64-linux, with gcc-8, gcc-9, gcc-10, gcc-11, clang-8, clang-10
and clang-12.
gdb/testsuite/ChangeLog:
2021-07-20 Tom de Vries <tdevries@suse.de>
* gdb.cp/step-and-next-inline.cc (tree_check, get_alias_set, main):
Tag closing brace with comment.
* gdb.cp/step-and-next-inline.h: Update to keep identical with
step-and-next-inline.cc.
* gdb.cp/step-and-next-inline.exp: Issue extra next when required.
* ld.texi: Document new output section type.
* ldgram.y: Add new token.
* ldlang.c: Handle the new flag.
* ldlang.h: Add readonly_section to list of section types.
* ldlex.l: Add a new identifier.
* testsuite/ld-scripts/output-section-types.t: New example linker script.
* testsuite/ld-scripts/output-section-types.d: Test driver.
* testsyute/ld-scripts/script.exp: Run the new test.
When running test-case gdb.base/ptype-offsets.exp with gcc-11 (with -gdwarf-5
default) or gcc-10 with target board unix/gdb:debug_flags=-gdwarf-5 we run
into this regression:
...
(gdb) ptype/o static_member^M
/* offset | size */ type = struct static_member {^M
- static static_member Empty;^M
/* 0 | 4 */ int abc;^M
^M
/* total size (bytes): 4 */^M
}^M
-(gdb) PASS: gdb.base/ptype-offsets.exp: ptype/o static_member
+(gdb) FAIL: gdb.base/ptype-offsets.exp: ptype/o static_member
...
This is caused by missing debug info, which I filed as gcc PR101452 - "[debug,
dwarf-5] undefined static member removed by
-feliminate-unused-debug-symbols".
It's not clear yet whether this is a bug or a feature, but work around this in
the test-cases by:
- defining the static member
- adding additional_flags=-fno-eliminate-unused-debug-types.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2021-07-20 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (gcc_major_version): New proc.
* gdb.base/ptype-offsets.cc: Define static member static_member::Empty.
* gdb.cp/templates.exp: Define static member using -DGCC_BUG.
* gdb.cp/m-static.exp: Add
additional_flags=-fno-eliminate-unused-debug-types.
* gdb.cp/pr-574.exp: Same.
* gdb.cp/pr9167.exp: Same.
With gcc-11 we run into:
...
(gdb) print pa_ptr.all^M
That operation is not available on integers of more than 8 bytes.^M
(gdb) KFAIL: gdb.ada/arrayptr.exp: scenario=all: print pa_ptr.all (PRMS: gdb/20991)
...
This is due to PR exp/20991 - "__int128 type support". Mark this and similar
FAILs as KFAIL.
Also mark this FAIL:
....
(gdb) print pa_ptr(3)^M
cannot subscript or call something of type `foo__packed_array_ptr'^M
(gdb) FAIL: gdb.ada/arrayptr.exp: scenario=minimal: print pa_ptr(3)
...
as a KFAIL for PR ada/28115 - "Support packed array encoded as
DW_TAG_subrange_type".
Tested on x86_64-linux, with gcc-10 and gcc-11.
gdb/testsuite/ChangeLog:
2021-07-21 Tom de Vries <tdevries@suse.de>
* gdb.ada/arrayptr.exp: Add KFAILs for PR20991 and PR28115.
* gdb.ada/exprs.exp: Add KFAILs for PR20991.
* gdb.ada/packed_array_assign.exp: Same.
netbsdpe was deprecated in c2ce831330.
Since then, a release has passed (2.37), and it was marked obselete in
5c9cbf07f3. Unless I am mistaken, that
means we can now remove support altogether.
All branches in the "active" code are remove, and the target is
additionally marked as obsolete next to the other removed ones for
libbfd and gdb.
Per [1] from the NetBSD toolchain list, PE/COFF support was removed a
decade ago. Furthermore, the sole mention of this target in the binutils
commit history was in 2002. Together, I'm led to believe this target
hasn't seen much attention in quite a while.
[1]: https://mail-index.netbsd.org/tech-toolchain/2021/06/16/msg003996.html
bfd/
* config.bfd: Remove netbsdpe entry.
binutils/
* configure.ac: Remove netbsdpe entry.
* testsuite/lib/binutils-common.exp (is_pecoff_format): Likewise.
* configure: Regenerate.
gas/
* configure.tgt: Remove netbsdpe entry.
gdb/
* configure.tgt: Add netbsdpe to removed targets.
ld/
* configure.tgt: Remove netbsdpe entry.
* testsuite/ld-bootstrap/bootstrap.exp: Likewise.
When the architecture supports memory tagging, we handle
pointer/reference types in a special way, so we can validate tags and
show mismatches.
Unfortunately, the currently implementation errors out when the user
prints non-address values: composite types, floats, references, member
functions and other things.
Vector registers:
(gdb) p $v0
Value can't be converted to integer.
Non-existent internal variables:
(gdb) p $foo
Value can't be converted to integer.
The same happens for complex types and printing struct/union types.
There are a few problems here.
The first one is that after print_command_1 evaluates the expression
to print, the tag validation code call value_as_address
unconditionally, without making sure we have have a suitable type
where it makes to sense to call it. That results in value_as_address
(if it isn't given a pointer-like type) trying to treat the value as
an integer and convert it to an address, which #1 - doesn't make sense
(i.e., no sense in validating tags after "print 1"), and throws for
non-integer-convertible types. We fix this by making sure we have a
pointer or reference type first, and only if so then proceed to check
if the address-like value has tags.
The second is that we're calling value_as_address even if we have an
optimized out or unavailable value, which throws, because the value's
contents aren't fully accessible/readable. This error currently
escapes out and aborts the print. This case is fixed by checking for
optimized out / unavailable explicitly.
Third, the tag checking process does not gracefully handle exceptions.
If any exception is thrown from the tag validation code, we abort the
print. E.g., the target may fail to access tags via a running thread.
Or the needed /proc files aren't available. Or some other untold
reason. This is a bit too rigid. This commit changes print_command_1
to catch errors, print them, and still continue with the normal
expression printing path instead of erroring out and printing nothing
useful.
With this patch, printing works correctly again:
(gdb) p $v0
$1 = {d = {f = {2.0546950501119882e-81, 2.0546950501119882e-81}, u = {3399988123389603631, 3399988123389603631}, s = {
3399988123389603631, 3399988123389603631}}, s = {f = {1.59329203e-10, 1.59329203e-10, 1.59329203e-10, 1.59329203e-10}, u = {
791621423, 791621423, 791621423, 791621423}, s = {791621423, 791621423, 791621423, 791621423}}, h = {bf = {1.592e-10,
1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10}, f = {0.11224, 0.11224, 0.11224, 0.11224, 0.11224,
0.11224, 0.11224, 0.11224}, u = {12079, 12079, 12079, 12079, 12079, 12079, 12079, 12079}, s = {12079, 12079, 12079, 12079,
12079, 12079, 12079, 12079}}, b = {u = {47 <repeats 16 times>}, s = {47 <repeats 16 times>}}, q = {u = {
62718710765820030520700417840365121327}, s = {62718710765820030520700417840365121327}}}
(gdb) p $foo
$2 = void
(gdb) p 2 + 2i
$3 = 2 + 2i
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28110
* Two add subset functions is redundant. Keep the riscv_add_implicit_subset,
and renamed it to riscv_add_subset. Besides, if the subset is added in order,
then we just add it at the tail of the subset list.
* Removed the "-march:" prefix from the error messages. Since not only the
-march= option will use the parser, but also the architecture elf attributes,
the default architecture setting and linker will use the same parser.
* Use a function, riscv_parse_check_conflicts, to check the conflicts
of extensions, including the rv64e and rv32q.
The rv32emc-elf/rv32i-elf/rv32gc-linux/rv64gc-elf/rv64gc-linux regressions
are tested and passed.
bfd/
* elfxx-riscv.c (riscv_lookup_subset): Check the subset tail list
first. If the subset is added in order, then we can just add it to
the tail without searching the whole list.
(riscv_add_subset): Replaced by riscv_add_implicit_subset.
(riscv_add_implicit_subset): Renamed to riscv_add_subset.
(riscv_parse_add_subset): Updated.
(riscv_parsing_subset_version): Removed the "-march:" prefix from
the error message.
(riscv_parse_prefixed_ext): Likewise.
(riscv_parse_std_ext): Likewise. And move the rv<xlen>e check
to riscv_parse_check_conflicts.
(riscv_parse_check_conflicts): New function used to check conflicts.
(riscv_parse_subset): Updated.
gas/
* testsuite/gas/riscv/march-fail-base-02.l: Updated.
* testsuite/gas/riscv/march-fail-unknown-std.l: Likewise.
As documented in bug 28086, test gdb.btrace/enable-new-thread.exp
started failing with commit 0618ae4149 ("gdb: optimize
all_matching_threads_iterator"):
(gdb) record btrace^M
(gdb) PASS: gdb.btrace/enable-new-thread.exp: record btrace
break 24^M
Breakpoint 2 at 0x555555555175: file /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.btrace/enable-new-thread.c, line 24.^M
(gdb) continue^M
Continuing.^M
/home/smarchi/src/binutils-gdb/gdb/inferior.c:303: internal-error: inferior* find_inferior_pid(process_stratum_target*, int): Assertion `pid != 0' failed.^M
A problem internal to GDB has been detected,^M
further debugging may prove unreliable.^M
Quit this debugging session? (y or n) FAIL: gdb.btrace/enable-new-thread.exp: continue to breakpoint: cont to bp.1 (GDB internal error)
Note that I only see the failure if GDB is compiled without libipt
support. This is because GDB then makes use BTS instead of PT, so
exercises different code paths.
I think that the commit above just exposed an existing problem. The
stack trace of the internal error is:
#8 0x0000561cb81e404e in internal_error (file=0x561cb83aa2f8 "/home/smarchi/src/binutils-gdb/gdb/inferior.c", line=303, fmt=0x561cb83aa099 "%s: Assertion `%s' failed.") at /home/smarchi/src/binutils-gdb/gdbsupport/errors.cc:55
#9 0x0000561cb7b5c031 in find_inferior_pid (targ=0x561cb8aafb60 <the_amd64_linux_nat_target>, pid=0) at /home/smarchi/src/binutils-gdb/gdb/inferior.c:303
#10 0x0000561cb7b5c102 in find_inferior_ptid (targ=0x561cb8aafb60 <the_amd64_linux_nat_target>, ptid=...) at /home/smarchi/src/binutils-gdb/gdb/inferior.c:317
#11 0x0000561cb7f1d1c3 in find_thread_ptid (targ=0x561cb8aafb60 <the_amd64_linux_nat_target>, ptid=...) at /home/smarchi/src/binutils-gdb/gdb/thread.c:487
#12 0x0000561cb7f1b921 in all_matching_threads_iterator::all_matching_threads_iterator (this=0x7ffc4ee34678, filter_target=0x561cb8aafb60 <the_amd64_linux_nat_target>, filter_ptid=...) at /home/smarchi/src/binutils-gdb/gdb/thread-iter.c:125
#13 0x0000561cb77bc462 in filtered_iterator<all_matching_threads_iterator, non_exited_thread_filter>::filtered_iterator<process_stratum_target* const&, ptid_t const&> (this=0x7ffc4ee34670) at /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/filtered-iterator.h:42
#14 0x0000561cb77b97cb in all_non_exited_threads_range::begin (this=0x7ffc4ee34650) at /home/smarchi/src/binutils-gdb/gdb/thread-iter.h:243
#15 0x0000561cb7d8ba30 in record_btrace_target::record_is_replaying (this=0x561cb8aa6250 <record_btrace_ops>, ptid=...) at /home/smarchi/src/binutils-gdb/gdb/record-btrace.c:1411
#16 0x0000561cb7d8bb83 in record_btrace_target::xfer_partial (this=0x561cb8aa6250 <record_btrace_ops>, object=TARGET_OBJECT_MEMORY, annex=0x0, readbuf=0x7ffc4ee34c58 "\260g\343N\374\177", writebuf=0x0, offset=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/record-btrace.c:1437
#17 0x0000561cb7ef73a9 in raw_memory_xfer_partial (ops=0x561cb8aa6250 <record_btrace_ops>, readbuf=0x7ffc4ee34c58 "\260g\343N\374\177", writebuf=0x0, memaddr=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/target.c:1504
#18 0x0000561cb7ef77da in memory_xfer_partial_1 (ops=0x561cb8aa6250 <record_btrace_ops>, object=TARGET_OBJECT_CODE_MEMORY, readbuf=0x7ffc4ee34c58 "\260g\343N\374\177", writebuf=0x0, memaddr=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/target.c:1635
#19 0x0000561cb7ef78b5 in memory_xfer_partial (ops=0x561cb8aa6250 <record_btrace_ops>, object=TARGET_OBJECT_CODE_MEMORY, readbuf=0x7ffc4ee34c58 "\260g\343N\374\177", writebuf=0x0, memaddr=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/target.c:1664
#20 0x0000561cb7ef7ba4 in target_xfer_partial (ops=0x561cb8aa6250 <record_btrace_ops>, object=TARGET_OBJECT_CODE_MEMORY, annex=0x0, readbuf=0x7ffc4ee34c58 "\260g\343N\374\177", writebuf=0x0, offset=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/target.c:1721
#21 0x0000561cb7ef8503 in target_read_partial (ops=0x561cb8aa6250 <record_btrace_ops>, object=TARGET_OBJECT_CODE_MEMORY, annex=0x0, buf=0x7ffc4ee34c58 "\260g\343N\374\177", offset=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/target.c:1974
#22 0x0000561cb7ef861f in target_read (ops=0x561cb8aa6250 <record_btrace_ops>, object=TARGET_OBJECT_CODE_MEMORY, annex=0x0, buf=0x7ffc4ee34c58 "\260g\343N\374\177", offset=140737352774277, len=1) at /home/smarchi/src/binutils-gdb/gdb/target.c:2014
#23 0x0000561cb7ef809f in target_read_code (memaddr=140737352774277, myaddr=0x7ffc4ee34c58 "\260g\343N\374\177", len=1) at /home/smarchi/src/binutils-gdb/gdb/target.c:1869
#24 0x0000561cb7937f4d in gdb_disassembler::dis_asm_read_memory (memaddr=140737352774277, myaddr=0x7ffc4ee34c58 "\260g\343N\374\177", len=1, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/gdb/disasm.c:139
#25 0x0000561cb80ab66d in fetch_data (info=0x7ffc4ee34e88, addr=0x7ffc4ee34c59 "g\343N\374\177") at /home/smarchi/src/binutils-gdb/opcodes/i386-dis.c:194
#26 0x0000561cb80ab7e2 in ckprefix () at /home/smarchi/src/binutils-gdb/opcodes/i386-dis.c:8628
#27 0x0000561cb80adbd8 in print_insn (pc=140737352774277, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/opcodes/i386-dis.c:9587
#28 0x0000561cb80abe4f in print_insn_i386 (pc=140737352774277, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/opcodes/i386-dis.c:8894
#29 0x0000561cb7744a19 in default_print_insn (memaddr=140737352774277, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/gdb/arch-utils.c:1029
#30 0x0000561cb7b33067 in i386_print_insn (pc=140737352774277, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/gdb/i386-tdep.c:4013
#31 0x0000561cb7acd8f4 in gdbarch_print_insn (gdbarch=0x561cbae2fb60, vma=140737352774277, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/gdb/gdbarch.c:3478
#32 0x0000561cb793a32d in gdb_disassembler::print_insn (this=0x7ffc4ee34e80, memaddr=140737352774277, branch_delay_insns=0x0) at /home/smarchi/src/binutils-gdb/gdb/disasm.c:795
#33 0x0000561cb793a5b0 in gdb_print_insn (gdbarch=0x561cbae2fb60, memaddr=140737352774277, stream=0x561cb8ac99f8 <null_stream>, branch_delay_insns=0x0) at /home/smarchi/src/binutils-gdb/gdb/disasm.c:850
#34 0x0000561cb793a631 in gdb_insn_length (gdbarch=0x561cbae2fb60, addr=140737352774277) at /home/smarchi/src/binutils-gdb/gdb/disasm.c:859
#35 0x0000561cb77f53f4 in btrace_compute_ftrace_bts (tp=0x561cbba11210, btrace=0x7ffc4ee35188, gaps=...) at /home/smarchi/src/binutils-gdb/gdb/btrace.c:1107
#36 0x0000561cb77f55f5 in btrace_compute_ftrace_1 (tp=0x561cbba11210, btrace=0x7ffc4ee35180, cpu=0x0, gaps=...) at /home/smarchi/src/binutils-gdb/gdb/btrace.c:1527
#37 0x0000561cb77f5705 in btrace_compute_ftrace (tp=0x561cbba11210, btrace=0x7ffc4ee35180, cpu=0x0) at /home/smarchi/src/binutils-gdb/gdb/btrace.c:1560
#38 0x0000561cb77f583b in btrace_add_pc (tp=0x561cbba11210) at /home/smarchi/src/binutils-gdb/gdb/btrace.c:1589
#39 0x0000561cb77f5a86 in btrace_enable (tp=0x561cbba11210, conf=0x561cb8ac6878 <record_btrace_conf>) at /home/smarchi/src/binutils-gdb/gdb/btrace.c:1629
#40 0x0000561cb7d88d26 in record_btrace_enable_warn (tp=0x561cbba11210) at /home/smarchi/src/binutils-gdb/gdb/record-btrace.c:294
#41 0x0000561cb7c603dc in std::__invoke_impl<void, void (*&)(thread_info*), thread_info*> (__f=@0x561cbb6c4878: 0x561cb7d88cdc <record_btrace_enable_warn(thread_info*)>) at /usr/include/c++/10/bits/invoke.h:60
#42 0x0000561cb7c5e5a6 in std::__invoke_r<void, void (*&)(thread_info*), thread_info*> (__fn=@0x561cbb6c4878: 0x561cb7d88cdc <record_btrace_enable_warn(thread_info*)>) at /usr/include/c++/10/bits/invoke.h:153
#43 0x0000561cb7c5dc92 in std::_Function_handler<void (thread_info*), void (*)(thread_info*)>::_M_invoke(std::_Any_data const&, thread_info*&&) (__functor=..., __args#0=@0x7ffc4ee35310: 0x561cbba11210) at /usr/include/c++/10/bits/std_function.h:291
#44 0x0000561cb7f2600f in std::function<void (thread_info*)>::operator()(thread_info*) const (this=0x561cbb6c4878, __args#0=0x561cbba11210) at /usr/include/c++/10/bits/std_function.h:622
#45 0x0000561cb7f23dc8 in gdb::observers::observable<thread_info*>::notify (this=0x561cb8ac5aa0 <gdb::observers::new_thread>, args#0=0x561cbba11210) at /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/observable.h:150
#46 0x0000561cb7f1c436 in add_thread_silent (targ=0x561cb8aafb60 <the_amd64_linux_nat_target>, ptid=...) at /home/smarchi/src/binutils-gdb/gdb/thread.c:263
#47 0x0000561cb7f1c479 in add_thread_with_info (targ=0x561cb8aafb60 <the_amd64_linux_nat_target>, ptid=..., priv=0x561cbb3f7ab0) at /home/smarchi/src/binutils-gdb/gdb/thread.c:272
#48 0x0000561cb7bfa1d0 in record_thread (info=0x561cbb0413a0, tp=0x0, ptid=..., th_p=0x7ffc4ee35610, ti_p=0x7ffc4ee35620) at /home/smarchi/src/binutils-gdb/gdb/linux-thread-db.c:1380
#49 0x0000561cb7bf7a2a in thread_from_lwp (stopped=0x561cba81db20, ptid=...) at /home/smarchi/src/binutils-gdb/gdb/linux-thread-db.c:429
#50 0x0000561cb7bf7ac5 in thread_db_notice_clone (parent=..., child=...) at /home/smarchi/src/binutils-gdb/gdb/linux-thread-db.c:447
#51 0x0000561cb7bdc9a2 in linux_handle_extended_wait (lp=0x561cbae25720, status=4991) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:1981
#52 0x0000561cb7bdf0f3 in linux_nat_filter_event (lwpid=435403, status=198015) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:2920
#53 0x0000561cb7bdfed6 in linux_nat_wait_1 (ptid=..., ourstatus=0x7ffc4ee36398, target_options=...) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:3202
#54 0x0000561cb7be0b68 in linux_nat_target::wait (this=0x561cb8aafb60 <the_amd64_linux_nat_target>, ptid=..., ourstatus=0x7ffc4ee36398, target_options=...) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:3440
#55 0x0000561cb7bfa2fc in thread_db_target::wait (this=0x561cb8a9acd0 <the_thread_db_target>, ptid=..., ourstatus=0x7ffc4ee36398, options=...) at /home/smarchi/src/binutils-gdb/gdb/linux-thread-db.c:1412
#56 0x0000561cb7d8e356 in record_btrace_target::wait (this=0x561cb8aa6250 <record_btrace_ops>, ptid=..., status=0x7ffc4ee36398, options=...) at /home/smarchi/src/binutils-gdb/gdb/record-btrace.c:2547
#57 0x0000561cb7ef996d in target_wait (ptid=..., status=0x7ffc4ee36398, options=...) at /home/smarchi/src/binutils-gdb/gdb/target.c:2608
#58 0x0000561cb7b6d297 in do_target_wait_1 (inf=0x561cba6d8780, ptid=..., status=0x7ffc4ee36398, options=...) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:3640
#59 0x0000561cb7b6d43e in operator() (__closure=0x7ffc4ee36190, inf=0x561cba6d8780) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:3701
#60 0x0000561cb7b6d7b2 in do_target_wait (ecs=0x7ffc4ee36370, options=...) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:3720
#61 0x0000561cb7b6e67d in fetch_inferior_event () at /home/smarchi/src/binutils-gdb/gdb/infrun.c:4069
#62 0x0000561cb7b4659b in inferior_event_handler (event_type=INF_REG_EVENT) at /home/smarchi/src/binutils-gdb/gdb/inf-loop.c:41
#63 0x0000561cb7be25f7 in handle_target_event (error=0, client_data=0x0) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:4227
#64 0x0000561cb81e4ee2 in handle_file_event (file_ptr=0x561cbae24e10, ready_mask=1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:575
#65 0x0000561cb81e5490 in gdb_wait_for_event (block=0) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:701
#66 0x0000561cb81e41be in gdb_do_one_event () at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:212
#67 0x0000561cb7c18096 in start_event_loop () at /home/smarchi/src/binutils-gdb/gdb/main.c:421
#68 0x0000561cb7c181e0 in captured_command_loop () at /home/smarchi/src/binutils-gdb/gdb/main.c:481
#69 0x0000561cb7c19d7e in captured_main (data=0x7ffc4ee366a0) at /home/smarchi/src/binutils-gdb/gdb/main.c:1353
#70 0x0000561cb7c19df0 in gdb_main (args=0x7ffc4ee366a0) at /home/smarchi/src/binutils-gdb/gdb/main.c:1368
#71 0x0000561cb7693186 in main (argc=11, argv=0x7ffc4ee367b8) at /home/smarchi/src/binutils-gdb/gdb/gdb.c:32
At frame 45, the new_thread observable is fired. At this moment, the
new thread isn't the current thread, inferior_ptid is null_ptid. I
think this is ok: the new_thread observable doesn't give any guarantee
on the global context when observers are invoked. Frame 35,
btrace_compute_ftrace_bts, calls gdb_insn_length. gdb_insn_length
doesn't have a thread_info or other parameter what could indicate where
to read memory from, it implicitly uses the global context
(inferior_ptid).
So we reach the all_non_exited_threads_range in
record_btrace_target::record_is_replaying with a null inferior_ptid.
The previous implemention of all_non_exited_threads_range didn't care,
but the new one does. The problem of calling gdb_insn_length and
ultimately trying to read memory with a null inferior_ptid already
existed, but the commit mentioned above made it visible.
Something between frames 40 (record_btrace_enable_warn) and 35
(btrace_compute_ftrace_bts) needs to be switching the global context to
make TP the current thread. Since btrace_compute_ftrace_bts takes the
thread_info to work with as a parameter, that typically means that it
doesn't require its caller to also set the global current context
(current thread) when calling. If it needs to call other functions
that do require the global current thread to be set, then it needs to
temporarily change the current thread while calling these other
functions. Therefore, switch and restore the current thread in
btrace_compute_ftrace_bts.
By inspection, it looks like btrace_compute_ftrace_pt may also call
functions sensitive to the global context: it installs the
btrace_pt_readmem_callback callback in the PT instruction decoder. When
this function gets called, inferior_ptid must be set appropriately. Add
a switch and restore in there too.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28086
Change-Id: I407fbfe41aab990068bd102491aa3709b0a034b3
I'm debugging why GDB crashes on OpenBSD/amd64, turns out it's because
x86_dr_low.get_status is nullptr. It would have been useful to be able
to break on x86_dr_low_get_status, so I thought it would be a good
reason to convert these function-like macros into functions.
Change-Id: Ic200b50ef8455b4697bc518da0fa2bb704cf4721
When run with the gdb-index or debug-names target boards, dup-psym.exp
fails. This came up for me because my new DWARF scanner reuses this
part of the existing index code, and so it registers as a regression.
This is PR symtab/25834.
Looking into this, I found that the DWARF index code here is fairly
different from the psymtab code. I don't think there's a deep reason
for this, and in fact, it seemed to me that the index code could
simply mimic what the psymtab code already does.
That is what this patch implements. The DW_AT_name and DW_AT_comp_dir
are now stored in the quick file names table. This may require
allocating a quick file names table even when DW_AT_stmt_list does not
exist. Then, the functions that work with this data are changed to
use find_source_or_rewrite, just as the psymbol code does. Finally,
line_header::file_full_name is removed, as it is no longer needed.
Currently, the index maintains a hash table of "quick file names".
The hash table uses a deletion function to free the "real name"
components when necessary. There's also a second such function to
implement the forget_cached_source_info method.
This bug fix patch will create a quick file name object even when
there is no DW_AT_stmt_list, meaning that the object won't be entered
in the hash table. So, this patch changes the memory management
approach so that the entries are cleared when the per-BFD object is
destroyed. (A dwarf2_per_cu_data destructor is not introduced,
because we have been avoiding adding a vtable to that class.)
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=25834
map_symbol_filenames can skip type units -- in fact I think it has to,
due to the assertion at the top of dw2_get_file_names. This may be a
regression due to the TU/CU unification patch, I did not check.
The DWARF index file name caching code only records when a line table
has been read and the reading failed. However, the code would be
simpler if it recorded any attempt, which is what this patch
implements.
The final bug fix in this series would duplicate the logic in
psymtab_to_fullname, so this patch extracts the body of this function
into a new function.
file_and_directory carries a std::string in case the compilation
directory is computed, but a subsequent patch wants to preserve this
string without also having to maintain the storage for it. So, this
patch arranges for the compilation directory string to be stored in
the per-BFD string bcache instead.
This patch removes the redundant "comp_unit" parameter from
compute_include_file_name, and arranges to pass a file_and_directory
object from the readers down to this function. It also changes the
partial symtab reader to use find_file_and_directory, rather than
reimplement this functionality by hand.
In order to fix an index-related regression, I want to use
psymtab_include_file_name in the DWARF index file-handling code. This
patch renames this function and changes it to no longer require a
partial symtab to be passed in. A subsequent patch will further
refactor this code to remove the redundant parameter (which was always
there but is now more obvious).
The test gdb.threads/fork-plus-threads.exp fails since 08bdefb58b
("gdb: make inferior_list use intrusive_list"):
FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
Looking at the log, we see that we are left with a bunch of inferiors in
the detach-on-fork=off case:
info inferiors^M
Num Description Connection Executable ^M
* 1 <null> <snip>/fork-plus-threads ^M
2 <null> <snip>/fork-plus-threads ^M
3 <null> <snip>/fork-plus-threads ^M
4 <null> <snip>/fork-plus-threads ^M
5 <null> <snip>/fork-plus-threads ^M
6 <null> <snip>/fork-plus-threads ^M
7 <null> <snip>/fork-plus-threads ^M
8 <null> <snip>/fork-plus-threads ^M
9 <null> <snip>/fork-plus-threads ^M
10 <null> <snip>/fork-plus-threads ^M
11 <null> <snip>/fork-plus-threads ^M
(gdb) FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
when we expect to have just one. The problem is prune_inferiors not
pruning inferiors. And this is caused by all_inferiors_safe not
actually iterating on inferiors. The current implementation:
inline all_inferiors_safe_range
all_inferiors_safe ()
{
return {};
}
default-constructs an all_inferiors_safe_range, which default-constructs
an all_inferiors_safe_iterator as its m_begin field, which
default-constructs a all_inferiors_iterator. A default-constructed
all_inferiors_iterator is an end iterator, which means we have
constructed an (end,end) all_inferiors_safe_range.
We actually need to pass down the list on which we want to iterator
(that is the inferior_list global), so that all_inferiors_iterator's
first constructor is chosen. We also pass nullptr as the proc_target
filter. In this case, we don't do any filtering, but if in the future
all_inferiors_safe needed to allow filtering on process target (like
all_inferiors does), we could pass down a process target pointer.
basic_safe_iterator's constructor needs to be changed to allow
constructing the wrapped iterator with multiple arguments, not just one.
With this, gdb.threads/fork-plus-threads.exp is passing once again for
me.
Change-Id: I650552ede596e3590c4b7606ce403690a0278a01
Currently, gdb cannot step outside of a signal handler on RISC-V
platforms. This causes multiple failures in gdb.base/sigstep.exp:
FAIL: gdb.base/sigstep.exp: continue to handler, nothing in handler, step from handler: leave handler (timeout)
FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: leave handler (timeout)
FAIL: gdb.base/sigstep.exp: continue to handler, nothing in handler, next from handler: leave handler (timeout)
FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, next from handler: leave handler (timeout)
FAIL: gdb.base/sigstep.exp: stepi from handleri: leave signal trampoline
FAIL: gdb.base/sigstep.exp: nexti from handleri: leave signal trampoline
=== gdb Summary ===
# of expected passes 587
# of unexpected failures 6
This patch adds support for stepping outside of a signal handler on
riscv*-*-linux*.
Implementation is heavily inspired from mips_linux_syscall_next_pc and
surroundings as advised by Pedro Alves.
After this patch, all tests in gdb.base/sigstep.exp pass.
Build and tested on riscv64-linux-gnu.
Many tests fail in gdb/testsuite/gdb.base/sigstep.exp on
riscv64-linux-gnu. Those tests check that when stepping, if the
debuggee received a signal it should step inside the signal handler.
This feature requires hardware support for single stepping (or at least
kernel support), but none are available on riscv*-linux-gnu hosts, at
the moment at least.
This patch adds RISC-V to the list of configurations that does not
have hardware single step capability, disabling tests relying on such
feature.
Tested on riscv64-linux-gnu.
While working on my series to replace the DWARF psymbol reader, I
noticed that the expand_symtabs_matching has an undocumented
invariant. I think that, if this invariant is not followed, then GDB
will crash. So, this patch documents this in the relevant spots and
introduces some asserts to make it clear.
Regression tested on x86-64 Fedora 32.
Investigation of using the Python API with an Ada program showed that
an array of dynamic types was not being handled properly. I tracked
this down to an oddity of how array strides are handled.
In gdb, an array stride can be attached to the range type, via the
range_bounds object. However, the stride can also be put into the
array's first field. From create_range_type_with_stride:
else if (bit_stride > 0)
TYPE_FIELD_BITSIZE (result_type, 0) = bit_stride;
It's hard to be sure why this is done, but I would guess a combination
of historical reasons plus a desire (mentioned in a comment somewhere)
to avoid modifying the range type.
This patch fixes the problem by changing type::bit_stride to
understand this convention. It also fixes one spot that reproduces
this logic.
Regression tested on x86-64 Fedora 32.
bfd * elf32-or1k.c (or1k_elf_relocate_section): Use a separate entry
in switch case R_OR1K_INSN_REL_26 where we need to check for
!SYMBOL_CALLS_LOCAL() instead of !SYMBOL_REFERENCES_LOCAL().
PR gdb/28093 points out that gdb crashes when language is set to
"unknown" and expression parsing is attempted. At first I thought
this was a regression due to the expression rewrite, but it turns out
that older versions crash as well.
This patch avoids the crash by changing the default expression parser
to throw an exception. I think this is preferable -- the current
behavior of silently doing nothing does not really make sense.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28093
