"gdbcore.h", "regcache.h", and "bsd-kvm.h".
(ppcnbsd_supply_pcb): New function.
(_initialize_ppcnbsd_nat): New prototype and function.
* config/powerpc/nbsd.mh (NATDEPFILES): Add bsd-kvm.o.
(LOADLIBES): New variable.
* Makefile.in (ppcnbsd-nat.o): Update dependencies.
the lower 32-bit halves of the GPRS to be their own raw registers,
not pseudoregisters.
* ppc-tdep.h (struct gdbarch_tdep): Remove ppc_gprs_pseudo_p flag;
add ppc_ev0_upper_regnum flag.
* rs6000-tdep.c: #include "reggroups.h".
(spe_register_p): Recognize the ev upper half registers as SPE
registers.
(init_sim_regno_table): Build gdb->sim mappings for the upper-half
registers.
(e500_move_ev_register): New function.
(e500_pseudo_register_read, e500_pseudo_register_write): The 'ev'
vector registers are the pseudo-registers now, formed by splicing
together the gprs and the upper-half registers.
(e500_register_reggroup_p): New function.
(P): Macro deleted.
(P8, A4): New macro.
(PPC_EV_REGS, PPC_GPRS_PSEUDO_REGS): Macros deleted.
(PPC_SPE_GP_REGS, PPC_SPE_UPPER_GP_REGS, PPC_EV_PSEUDO_REGS): New
macros.
(registers_e500): Rearrange register set so that the raw register
set contains 32-bit GPRs and upper-half registers, and the SPE
vector registers become pseudo-registers.
(rs6000_gdbarch_init): Don't initialize tdep->ppc_gprs_pseudo_p;
it has been deleted. Initialize ppc_ev0_upper_regnum. Many other
register numbers are now the same for the E500 as they are for
other PowerPC variants. Register e500_register_reggroup_p as the
register group function for the E500.
* Makefile.in (rs6000-tdep.o): Update dependencies.
Adapt PPC E500 native support to the new raw regcache layout.
* ppc-linux-nat.c (struct gdb_evrregset_t): Doc fixes.
(read_spliced_spe_reg, write_spliced_spe_reg): Deleted.
(fetch_spe_register, store_spe_register): Handle fetching/storing
all the SPE registers at once, if regno == -1. These now take
over the job of fetch_spe_registers and store_spe_registers.
(fetch_spe_registers, store_spe_registers): Deleted.
(fetch_ppc_registers, store_ppc_registers): Fetch/store gprs
unconditionally; they're always raw. Fetch/store SPE upper half
registers, if present, instead of ev registers.
(fetch_register, store_register): Remove sanity checks: gprs are
never pseudo-registers now, so we never need to even mention any
registers that are ever pseudoregisters.
2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* ppc-tdep.h (struct gdbarch_tdep): New member: 'sim_regno'.
* rs6000-tdep.c: #include "sim-regno.h" and "gdb/sim-ppc.h".
(set_sim_regno, init_sim_regno_table, rs6000_register_sim_regno):
New functions.
(rs6000_gdbarch_init): Register rs6000_register_sim_regno. Call
init_sim_regno_table.
* Makefile.in (gdb_sim_ppc_h): New variable.
(rs6000-tdep.o): Update dependencies.
include/gdb/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
* sim-ppc.h: New file.
sim/ppc/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* sim_calls.c: #include "registers.h" and "gdb/sim-ppc.h"; do not
include GDB's "defs.h".
(gdb_register_name_table): New variable.
(gdb_register_name_table_size): New enum constant.
(gdb_register_name): New function.
(sim_fetch_register, sim_store_register): Use gdb_register_name,
instead of calling gdbarch_register_name.
* Makefile.in (GDB_SIM_PPC_H): New variable.
(DEFS_H): Delete variable.
(sim_calls.o): Update dependencies.
<machine/pcb.h> and "bsd-kvm.h".
(PCB_REGS_FP, PCB_REGS_SP): Define if not already defined.
(m68kbsd_supply_pcb): New function.
(_initialize_m68kbsd_nat): New prototype and function.
* Makefile.in (m68kbsd-nat.o): Update dependencies.
* config/m68k/nbsdelf.mh (NATDEPFILES): Add bsd-kvm.o.
(LOADLIBES): New variable.
* config/m68k/obsd.mh (NATDEPFILES): Add bsd-kvm.o.
(LOADLIBES): New variable.
* hppa-tdep.h (struct value): Forward declaration.
(gdbarch_tdep): Define tdep find_global_pointer method.
* hppa-tdep.c (hppa32_push_dummy_call): Find the global pointer
associated with the function we are trying to call, and write it
to the gp register.
(hppa32_convert_from_funct_ptr_addr): New function.
(hppa_find_global_pointer): New function.
(hppa_gdbarch_init): Set default find_global_pointer method; set
convert_from_func_ptr_addr method.
* hppa-linux-tdep.c (hppa_linux_find_global_pointer): New function.
(hppa_linux_init_abi): Set find_global_pointer method.
* Makefile.in (hppa-linux-tdep.o): Add value.h dependency.
"gdb_assert.h". Con't include "gregset.h".
(fbsd_make_corefile_notes): Use regset-based core file support
instead off fill_gregset and fill_fpregset.
* Makefile.in (fbsd-proc.o): Update dependencies.
* symfile.h (symbol_file_add_from_memory): Delete declaration.
* symfile-mem.h: Delete file.
* symfile-mem.c: Do not include "symfile-mem.h".
(symbol_file_add_from_memory): Make static. Use "struct bfd" and
"struct bfd_section". When an error do not bother returning NULL.
(add_symbol_file_from_memory_command): Use "struct bfd" and
"struct bfd_section".
* Makefile.in (symfile_mem_h): Delete.
(symfile-mem.o): Update dependencies.
ppc_fp0_regnum and ppc_fpscr_regnum: if they are -1, then this
processor variant lacks those registers.
(ppc_floating_point_unit_p): Change description to make it clear
that this returns info about the ISA, not the ABI.
* rs6000-tdep.c (ppc_floating_point_unit_p): Decide whether to
return true or false by checking tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum. The original code replicated the BFD
arch/mach switching done in rs6000_gdbarch_init; it's better to
keep that logic there, and just check the results here.
(rs6000_gdbarch_init): On the E500, set tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum to -1 to indicate that we have no
floating-point registers.
(ppc_supply_fpregset, ppc_collect_fpregset)
(rs6000_push_dummy_call, rs6000_extract_return_value)
(rs6000_store_return_value): Assert that we have floating-point
registers.
(rs6000_dwarf2_stab_reg_to_regnum): Add FIXME.
(rs6000_frame_cache): Don't note the locations at which
floating-point registers were saved if we have no fprs.
* aix-thread.c (supply_fprs, fill_fprs): Assert that we have FP
registers.
(fetch_regs_user_thread, fetch_regs_kernel_thread)
(store_regs_user_thread, store_regs_kernel_thread): Only call
supply_fprs / fill_fprs if we actually have floating-point
registers.
(special_register_p): Check ppc_fpscr_regnum before matching
against it.
(supply_sprs64, supply_sprs32, fill_sprs64, fill_sprs32): Don't
supply / collect fpscr if we don't have it.
* ppc-bdm.c: #include "gdb_assert.h".
(bdm_ppc_fetch_registers, bdm_ppc_store_registers): Assert that we
have floating-point registers, since I can't test this code on
FP-free systems to adapt it.
* ppc-linux-nat.c (ppc_register_u_addr): Don't match against the
fpscr and floating point register numbers if they don't exist.
(fetch_register): Assert that we have floating-point registers
before we reach the code that handles them.
(store_register): Same. And use tdep instead of calling
gdbarch_tdep again.
(fill_fpregset): Don't try to collect FP registers and fpscr if we
don't have them.
(ppc_linux_sigtramp_cache): Don't record the saved locations of
fprs and fpscr if we don't have them.
(ppc_linux_supply_fpregset): Don't supply fp regs and fpscr if we
don't have them.
* ppcnbsd-nat.c: #include "gdb_assert.h".
(getfpregs_supplies): Assert that we have floating-point registers.
* ppcnbsd-tdep.c (ppcnbsd_supply_fpreg, ppcnbsd_fill_fpreg): Same.
* ppcobsd-tdep.c: #include "gdb_assert.h".
(ppcobsd_supply_gregset, ppcobsd_collect_gregset): Assert that we
have floating-point registers.
* rs6000-nat.c (regmap): Don't match against the fpscr and
floating point register numbers if they don't exist.
(fetch_inferior_registers, store_inferior_registers,
fetch_core_registers): Only fetch / store / supply the
floating-point registers and the fpscr if we have them.
* Makefile.in (ppc-bdm.o, ppc-linux-nat.o, ppcnbsd-nat.o)
(ppcobsd-tdep.o): Update dependencies.
ppc_fp0_regnum and ppc_fpscr_regnum: if they are -1, then this
processor variant lacks those registers.
(ppc_floating_point_unit_p): Change description to make it clear
that this returns info about the ISA, not the ABI.
* rs6000-tdep.c (ppc_floating_point_unit_p): Decide whether to
return true or false by checking tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum. The original code replicated the BFD
arch/mach switching done in rs6000_gdbarch_init; it's better to
keep that logic there, and just check the results here.
(rs6000_gdbarch_init): On the E500, set tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum to -1 to indicate that we have no
floating-point registers.
(ppc_supply_fpregset, ppc_collect_fpregset)
(rs6000_push_dummy_call, rs6000_extract_return_value)
(rs6000_store_return_value): Assert that we have floating-point
registers.
(rs6000_dwarf2_stab_reg_to_regnum): Add FIXME.
(rs6000_frame_cache): Don't note the locations at which
floating-point registers were saved if we have no fprs.
* aix-thread.c (supply_fprs, fill_fprs): Assert that we have FP
registers.
(fetch_regs_user_thread, fetch_regs_kernel_thread)
(store_regs_user_thread, store_regs_kernel_thread): Only call
supply_fprs / fill_fprs if we actually have floating-point
registers.
(special_register_p): Check ppc_fpscr_regnum before matching
against it.
(supply_sprs64, supply_sprs32, fill_sprs64, fill_sprs32): Don't
supply / collect fpscr if we don't have it.
* ppc-bdm.c: #include "gdb_assert.h".
(bdm_ppc_fetch_registers, bdm_ppc_store_registers): Assert that we
have floating-point registers, since I can't test this code on
FP-free systems to adapt it.
* ppc-linux-nat.c (ppc_register_u_addr): Don't match against the
fpscr and floating point register numbers if they don't exist.
(fetch_register): Assert that we have floating-point registers
before we reach the code that handles them.
(store_register): Same. And use tdep instead of calling
gdbarch_tdep again.
(fill_fpregset): Don't try to collect FP registers and fpscr if we
don't have them.
(ppc_linux_sigtramp_cache): Don't record the saved locations of
fprs and fpscr if we don't have them.
(ppc_linux_supply_fpregset): Don't supply fp regs and fpscr if we
don't have them.
* ppcnbsd-nat.c: #include "gdb_assert.h".
(getfpregs_supplies): Assert that we have floating-point registers.
* ppcnbsd-tdep.c (ppcnbsd_supply_fpreg, ppcnbsd_fill_fpreg): Same.
* ppcobsd-tdep.c: #include "gdb_assert.h".
(ppcobsd_supply_gregset, ppcobsd_collect_gregset): Assert that we
have floating-point registers.
* rs6000-nat.c (regmap): Don't match against the fpscr and
floating point register numbers if they don't exist.
(fetch_inferior_registers, store_inferior_registers,
fetch_core_registers): Only fetch / store / supply the
floating-point registers and the fpscr if we have them.
* Makefile.in (ppc-bdm.o, ppc-linux-nat.o, ppcnbsd-nat.o)
(ppcobsd-tdep.o): Update dependencies.
include "symtab.h", "opcode/vax.h" and "inferior.h".
(vax_skip_prologue): Replace calls to read_memory_integer by calls
to read_memory_unsigned_integer.
(vax_gdbarch_init): Reorder.
(_initialize_vax_tdep): Spell out prototype.
* Makefile.in (vax-tdep.o): Update dependencies.
* Makefile.in (ALLDEPFILES): Add hppa-linux-tdep.c and
hppa-linux-nat.c.
(hppa-linux-tdep.o, hppa-linux-nat.o): Define rules.
* hppa-linux-nat.c (fetch_register, store_register): Define.
(fetch_inferior_registers, store_inferior_registers): Define.
(supply_gregset): Add comment and clean up some unneeded code.
(fill_gregset): Add comment and fix so that it saves registers in
the right place in the gregset.
(fill_fpregset): Fix buffer overrun problem.
* config/pa/nm-linux.h (FETCH_INFERIOR_REGISTERS): Define.
