Make Sparc a Multi-Arch target. Discard PARAMS macro (require ANSI).
* sparc-tdep.c: include arch-utils.h.
(SPARC_HAS_FPU, FP_REGISTER_BYTES, FP_MAX_REG NUM, SPARC_INTREG_SIZE,
DUMMY_REG_SAVE_OFFSET): provide multi-arch-compatible definitions.
(GDB_TARGET_IS_SPARC64): make into a runtime test.
(struct frame_extra_info): Define, use instead of the macro.
(Many places): Use alloca instead of statically allocated buffers
that depend on a multi-arch variable such as MAX_REGISTER_RAW_SIZE.
(sparc_extract_struct_value_address): Accept a pointer arg instead
of an array sized by REGISTER_BYTES.
(examine_prologue): Accept a pointer to an array of CORE_ADDR,
instead of the defunct struct frame_saved_regs. Recognize new
Sparc64 store instructions as part of the prologue. Ignore the
destination of a frame store when parsing the prologue (so long
as it's on the stack).
(sparc_push_dummy_frame): Fix incorrect buffer offset for PSTATE.
(sparc_frame_find_saved_regs): Accept a ptr to an array of CORE_ADDR
instead of the defunct struct frame_saved_regs.
(supply_gregset): Discard unnecessary 'zerobuf': just send NULL to
supply_register. Provide 4-byte offset to compensate for diff
between size of the prgreg_t elements on a 64-bit host and size
of the registers for a 32-bit target. Fill all inaccessible regs
with zero so they won't keep being requested again and again.
(fill_gregset): Handle 32/64 size difference between registers
and prgreg_t. Handle as many new 64-bit regs as possible.
(supply_fpregset, fill_fpregset): Attempt to handle 64-bit world.
(sparc_push_arguments): Rename to sparc32_push_arguments.
Copy arguments into registers as well as onto stack, so that the
CALL_DUMMY (code pushed onto the target stack) is not required.
(sparc_extract_return_value): Rename to sparc32_extract_return_value.
(sparc_store_return_value): Use memset instead of bzero.
Use write_register_gen instead of write_register_bytes.
(sparclet_store_return_value): New function.
(_initialize_sparc_tdep): Call register_gdbarch_init to activate
the gdbarch multi-architecture system.
(sp64_push_arguments): Rename to sparc64_push_arguments.
Extend to store arguments in general registers as well as on stack.
(sparc64_extract_return_value): Rename to sp64_extract_return_value.
Use as a private function, to be called by the new external function
sparc64_extract_return_value.
(sparclet_extract_return_value): New function.
(sparc32_stack_align, sparc64_stack_align, sparc32_register_name,
sparc64_register_name, sparc_print_extra_frame_info,
sparclite_register_name, sparclet_register_name,
sparc_push_return_address, sparc64_use_struct_convention,
sparc32_store_struct_return, sparc64_store_struct_return,
sparc32_register_virtual_type, sparc64_register_virtual_type,
sparc32_register_size, sparc64_register_size,
sparc32_register_byte, sparc64_register_byte,
sparc_gdbarch_skip_prologue, sparc_convert_to_virtual,
sparc_convert_to_raw, sparc_frame_init_saved_regs,
sparc_frame_address, sparc_gdbarch_fix_call_dummy,
sparc_coerce_float_to_double, sparc_call_dummy_address,
sparc_y_regnum, sparc_reg_struct_has_addr, sparc_intreg_size,
sparc_return_value_on_stack): New functions supporting multi-arch.
(sparc_gdbarch_init): New function; initialize multi-arch.
(struct gdbarch_tdep): Define, use for private multi-arch data.
* config/sparc/tm-sparc.h: Move definitions around, enclose with
#ifdef GDB_MULTI_ARCH tests, provide some multi-arch alternate
definitions. Add enums for register names, to help debugging gdb.
This header file must work for non-multi-arch and for multi-arch.
* config/sparc/tm-sp64.h: Add GDB_MULTI_ARCH configuration. Also add
AT_ENTRY_POINT definitions for CALL_DUMMY, for non-multi-arch case.
Define GDB_MULTI_ARCH.
* config/sparc/tm-sparclet.h: Add GDB_MULTI_ARCH configuration.
Do not define GDB_MULTI_ARCH (bfd does not correctly identify target).
* config/sparc/tm-sparclite.h: Ditto.
* config/sparc/tm-sun4sol2.h: Define GDB_MULTI_ARCH.
* sparclet-rom.c (sparclet_regnames): Initialize explicitly, to
avoid using deprecated REGISTER_NAMES macro.
* Makefile.in: Let sparc-tdep.c depend on arch-utils.h.
that directory.
* defs.h utils.c (error warning): Make message be const.
* main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
to hook. Otherwise send it to fputs.
* monitor.c monitor.h (monitor_get_dev_name): New function. Does
the obvious.
* remote-e7000.c: Remove debugify stuff. Change printf, fprintf
to _filtered forms to make output appear in GUIs. Replace all
uses of SERIAL_READCHAR with readchar, which has better error
checking.
* (e7000_parse_device): Add prototype.
* (readchar): Improve doc. Handle random serial errors.
* (expect): Disable notice_quit code. It's busted. Remove
serial error handling (it's now handled in readchar). Remove
remote_debug echoing. That's handled in readchar as well.
* (e7000_parse_device): Remove serial_flag arg. It's not
necessary.
* (e7000_open): Split into two pieces. Second part is
e7000_start_remote, and is error protected. Now, when we connect
to the target, we setup the initial frame and registers so that
the user gets an immediate indication of where the target is.
* (gch): Remove debug output. That's handled by readchar.
* (e7000_read_inferior_memory): Handle errors better.
* (_initialize_remote_e7000): Get rid of `<xxx>' things from
command names. They show up when doing completion and confuse
things horribly.
* ser-e7kpc.c: Remove the last seven months of brain damage. Get
rid of the DLL's since we can access the device directly from Win32s
and Win95. Get rid of debugify crud.
* serial.c: Remove debugify cruft.
* (serial_logchar serial_log_command serial_write serial_readchar
serial_send_break serial_close): Merge common functionality into
serial_logchar. Clean up rest of routines.
* sparclet-rom.c: Disembowel. Leave only download routine.
Download routine now switches to remote target automatically.
* top.c (disconnect): Only define if SIGHUP is defined. Cleans
up MSVC/Win32 problem.
* utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
or gdb_stderr.
* config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
* config/sparc/tm-sparclet.h: Remove override for prompt.
* sparclet-rom.c: Remove includes of Unix system files.
Add function "sparclet_supply_register" so that parse_register_dump
will not seg-fault by calling a null function pointer.
Remove XMODEM support (unfinished work?).
Remove flag "MO_HANDLE_NL", so monitor's output can be read by humans.
Add fill command.
Remove colon from getreg.resp_delim so PSR register will work.
Remove pointer to sparclet_load (downloading SREC's doesn't work).
Null out local register names for %g0, all %cc and all %asr regs,
since the monitor can't report them. Will return zero instead.
* sparclet-stub.c: New -- remote protocol support for sparclet CPU.
* config/sparc/tm-sparclet.h: Re-arrange REGISTER_NAMES:
Add back %g0 and %psr, add %cc coprocessor regs, add %asr regs.
Adjust NUM_REGS and REGISTER_BYTES accordingly
* monitor.h,monitor.c:
Added monitor flags MO_NO_ECHO_ON_SETMEM (don't expect echo on
setmem command), MO_RUN_FIRST_TIME (if command to start process
running on target is different from one to continue execution),
MO_HEX_PREFIX (if addresses from monitor have a "0x" prefix).
* monitor.c,parse.c,sparc-tdep.c:
Don't require strings in the registers array. This is to allow
NULLs to be place holders in the tm-*.h file so that only minor
changes are needed when a new processor is introduced (eg, one
without floating point).
* sparc-tdep.c: Conditionally remove dependancies on floating point.
* sparclet-rom.c,config/sparc/sparclet.mt,config/sparc/tm-sparclet.h:
New files for target sparclet.
* symfile.c: Add option for 2nd parameter on load command : a load
offset added to the vma of each section.
