We check register-only source operand to decide if two source operands of
VEX encoded instructions should be swapped. But source operands in AMX
instructions with two source operands swapped are all register-only
operand. Add SwapSources to indicate two source operands should be
swapped.
gas/
* config/tc-i386.c (build_modrm_byte): Check vexswapsources to
swap two source operands.
opcodes/
* i386-gen.c (opcode_modifiers): Add VexSwapSources.
* i386-opc.h (VexSwapSources): New.
(i386_opcode_modifier): Add vexswapsources.
* i386-opc.tbl: Add VexSwapSources to BMI2 and BMI instructions
with two source operands swapped.
* i386-tbl.h: Regenerated.
The unprivileged CSR should be controlled by other specific specs rather
than the privileged spec. For example, the debug CSR should be controlled
by the debug spec, and the float CSR should be controlled by the float
spec. User may use assembler options to choose what the debug and other
specs they want, or may encode the versions of specs into the architecture
string directly. Since we haven't decided which one is better, we set the
defined and aborted versions of unprivileged CSR to PRIV_SPEC_CLASS_NONE
in the include/opcode/riscv-opc.h, to tell assembler don't check priv spec
versions for them. However, these PRIV_SPEC_CLASS_NONE will be changed
to FLOAT_SPEC_CLASS_* and DEBUG_SPEC_CLASS_* in the future.
gas/
* config/tc-riscv.c (riscv_csr_class_check): Removed. Move the
checking into riscv_csr_address.
(riscv_csr_version_check): Likewise.
(riscv_csr_address): New function. Return the suitable CSR address
after checking the ISA dependency and versions. Issue warnings if
we find any conflict and -mcsr-check is set. CSR_CLASS_F and
CSR_CLASS_DEBUG are unprivileged CSR for now, so don't check the
priv spec versions for them.
(reg_csr_lookup_internal): Call riscv_csr_address to find the
suitable CSR address.
* testsuite/gas/riscv/priv-reg-fail-fext.d: Remove -mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-fext.l: We don't care the
priv spec warnings here. These warnings are added by accident.
Remove them and only focus on the ISA dependency warnings.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Updated since
dscratch0 and dscratch1 are regarded as the unprivileged CSR rather
than the privileged ones.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* testsuite/gas/riscv/priv-reg.s: Likewise. Add missing debug CSR.
* testsuite/gas/riscv/priv-reg-version-1p9.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise.
* testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
* testsuite/gas/riscv/csr-dw-regnums.s: Likewise.
include/
* opcode/riscv-opc.h: Support the unprivileged CSR. The versions
of the unprivileged CSR should be PRIV_SPEC_CLASS_NONE for now.
* opcode/riscv.h (enum riscv_csr_class): Add CSR_CLASS_DEBUG.
opcodes/
* riscv-dis.c (print_insn_args, case 'E'): Updated. Let the
unprivileged CSR can also be initialized.
Rename VecSIB to SIB to support Intel Advanced Matrix Extensions which
introduces instructions with a mandatory SIB byte which isn't a vector
SIB (VSIB).
gas/
* config/tc-i386.c (check_VecOperands): Replace vecsib with sib.
Replace VecSIB128, VecSIB256 and VecSIB512 with VECSIB128,
VECSIB256 and VECSIB512, respectively.
(build_modrm_byte): Replace vecsib with sib.
opcodes/
* i386-gen.c (opcode_modifiers): Replace VecSIB with SIB.
(VecSIB128): Renamed to ...
(VECSIB128): This.
(VecSIB256): Renamed to ...
(VECSIB256): This.
(VecSIB512): Renamed to ...
(VECSIB512): This.
(VecSIB): Renamed to ...
(SIB): This.
(i386_opcode_modifier): Replace vecsib with sib.
* i386-opc.tbl (VexSIB128): New.
(VecSIB256): Likewise.
(VecSIB512): Likewise.
Replace VecSIB=1, VecSIB=2 and VecSIB=3 with VexSIB128, VecSIB256
and VecSIB512, respectively.
The {Q|Q} construct on lgdt/lidt and the slightly different {Q|IQ}
struck me as odd when encountering. Realizing they both have the same
effect, let's free up the I macro by using the former form of construct
where needed (there aren't that many uses overall).
With there now being several multi-character macros also re-do "alt"
handling slightly: Terminate it when finding the closing brace, rather
than after the next single character. Also set the flag only when
actually in Intel syntax mode.
Multiple -M options can be specified in any order. Therefore stright
assignment to fields affected needs to be avoided, such that earlier
options' effects won't be discarded. This was in particular a problem
for -Msuffix followed by certain of the other sub-options.
While updating documentation, take the liberty and also drop the
redundant mentioning of being able to comma-separate multiple options.
There's clearly a shortage of available macro characters, as can be seen
from the various two-character macros that had to be introduced. Don't
waste characters for things that can be expressed differently. In the
case of J this alternative is {l|}.
SYSRET can't use the same macro as IRET, since there's no 16-bit operand
size form of it. Re-use LQ for it instead.
Doing so made obvious that outside of 64-bit mode {,V}CVTSI2S{S,D} and
PTWRITE should have an 'l' suffix printed only in suffix-always mode.
We do know some conflicts among different privileged specs. For linker,
the safest approach is that don't allow the object linked with others which
may cause conflicts. But this may cause inconvenience since not all objects
with conflicting priv specs are linked will cause problems. But it is hard
to know the detailed conflict cases for linker, so we probably need a option
to tell linker that we do know there are no conflicts, or we are willing to
take risks to link the objects with conflicted priv specs. But the option
is still under discussion.
Therefore, we can report warnings rather than errors when linking the objects
with conflicted priv specs. This not only makes the linker more flexible,
but also warns people that the conflicts may happen. We also need to update
the output priv spec version once the input priv spec is newer.
bfd/
* elfxx-riscv.c (struct priv_spec_t priv_specs[]): Move them from
opcodes/riscv-opc.c to bfd/elfxx-riscv.c, since we need it in linker.
(riscv_get_priv_spec_class): Likewise.
(riscv_get_priv_spec_name): Likewise.
(riscv_get_priv_spec_class_from_numbers): New function, convert
the version numbers into string, then call riscv_get_priv_spec_class
to get the priv spec class.
* elfxx-riscv.h (riscv_get_priv_spec_class): Move forward declaration
from include/opcode/riscv.h to bfd/elfxx-riscv.h.
(riscv_get_priv_spec_name): Likewise.
(riscv_get_priv_spec_class_from_numbers): New forward declaration.
(opcode/riscv.h): Include it in the header rather than elfxx-riscv.c.
* elfnn-riscv.c (riscv_merge_attributes): Get the priv spec classes
of input and output objects form their priv spec attributes by
riscv_get_priv_spec_class_from_numbers. Report warning rather than
errors when linking objects with differnet priv spec versions. We do
know v1.9.1 may have conflicts to other versions, so report the
warning, too. After that, update the output priv spec version to the
newest one so far.
gas/
* config/tc-riscv.c (buf_size, buf): Remove the unused variables.
(riscv_set_default_priv_spec): Get the priv spec version from the
priv spec attributes by riscv_get_priv_spec_class_from_numbers.
include/
* opcode/riscv.h (riscv_get_priv_spec_class): Move the function
forward declarations to bfd/elfxx-riscv.h.
(riscv_get_priv_spec_name): Likewise.
opcodes/
* riscv-opc.c: Move the structures and functions to bfd/elfxx-riscv.c.
* riscv-dis.c: Include elfxx-riscv.h.
ld/
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-01.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-02.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-03.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-04.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-05.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-06.d: Updated.
There is a conflict between v1.9 and v1.9.1 - CSR MISA address. MISA is
0xf10 in v1.9, but change to 0x301 in v1.9.1. The change made MISA writable,
but may also cause risk of compatibility. Binutils already support the
-mpriv-spec options and ELF priv attributes, which can used to choose what
privileged spec you want, and then give a correponding CSR name and address
to use. But Gdb and other tools don't have the simialr mechanism for now.
However, there are two things can be confirmed,
1. If we don't have a way to control the priv specs, then the changes, like
MISA, will cause risk and hard to maintain.
2. We get the guarantee that the CSR address won't be reused in the future
specs, even if it is dropped.
I'm not sure if Gdb needs to care about the priv spec versions, it is still
discussing. But drop the priv spec v1.9, and make sure that we won't reuse
the CSR address is a useful solution for now. Also, we might drop the v1.9.1
in a year or two. After that, specs above v1.10 should be compatible anyway.
gas/
* testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Removed.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p9.d: Likewise.
include/
* opcode/riscv-opc.h: Update the defined versions of CSR from
PRIV_SPEC_CLASS_1P9 to PRIV_SPEC_CLASS_1P9P1. Also, drop the
MISA DECLARE_CSR_ALIAS since it's aborted version is v1.9.
* opcode/riscv.h (enum riscv_priv_spec_class): Remove
PRIV_SPEC_CLASS_1P9.
opcodes/
* riscv-opc.c (priv_specs): Remove v1.9 and PRIV_SPEC_CLASS_1P9.
Prior to this patch, the information describing the AArch64 system
registers was separate from the information describing which system
registers are available depending on the CPU feature set. Indeed, the
latter was implemented as a separate function from the main table with
the system register information.
This patch remedies this situation and puts the feature information into
the system register table itself.
This has several advantages:
* Having all the information described in one place is easier to
maintain.
* The logic to check whether a system register is supported now becomes
trivial (and much more efficient).
Since this patch ended up touching every line of the system register
table, I took the opportunity to make the formatting more consistent and
remove some redundant comments.
Note that there is still more refactoring that could be done along the
same lines here (e.g. with the TLB instructions) but this seemed like a
reasonable first pass.
Testing:
* Regression tested an x64 -> aarch64-none-elf cross binutils.
* Built aarch64-none-elf cross toolchain, checked newlib startup
code still works.
* Bootstrapped binutils on aarch64-linux-gnu, regression tested.
* Built aarch64 kernel using new binutils with allyesconfig.
OK for master? If so, I'll need a maintainer to commit on my behalf
since I don't have write access.
Thanks,
Alex
---
include/ChangeLog:
2020-06-11 Alex Coplan <alex.coplan@arm.com>
* opcode/aarch64.h (aarch64_sys_reg): Add required features to struct
describing system registers.
opcodes/ChangeLog:
2020-06-11 Alex Coplan <alex.coplan@arm.com>
* aarch64-opc.c (SYSREG): New macro for describing system registers.
(SR_CORE): Likewise.
(SR_FEAT): Likewise.
(SR_RNG): Likewise.
(SR_V8_1): Likewise.
(SR_V8_2): Likewise.
(SR_V8_3): Likewise.
(SR_V8_4): Likewise.
(SR_PAN): Likewise.
(SR_RAS): Likewise.
(SR_SSBS): Likewise.
(SR_SVE): Likewise.
(SR_ID_PFR2): Likewise.
(SR_PROFILE): Likewise.
(SR_MEMTAG): Likewise.
(SR_SCXTNUM): Likewise.
(aarch64_sys_regs): Refactor to store feature information in the table.
(aarch64_sys_reg_supported_p): Collapse logic for system registers
that now describe their own features.
(aarch64_pstatefield_supported_p): Likewise.
All of data size, rep, lock, and rex prefixes are invalid with VEX- and
alike encoded insns. Make sure they get printed explicitly in all cases,
to signal the anomaly. With this, do away with "rex_ignored" - if there
is a rex prefix, we want to print it anyway for VEX etc (and there's
nothing "ignored" about it in the first place - such an instruction will
raise #UD).
Neither the legacy nor the VEX-encoded forms are permitted with register
operands, just like is already the case for their store forms as well as
{,V}MOV{L,H}PS.
At the same time, besides folding respective vex_len_table[] entries,
adjust adjacent related legacy mod_table[] entries:
- when the prefix was already decoded, PREFIX_OPCODE is pointless,
- limit the amount of string literals by using X consistently on all
{,V}MOV{L,H}P{S,D} forms.
For major opcodes allowing only packed FP kinds of operands, i.e. the
ones where legacy and AVX decoding uses the X macro, we can do so for
AVX512 as well, by attaching to the checking logic the "EVEX.W must
match presence of embedded 66 prefix" rule. (Encodings not following
this general pattern simply may not gain the PREFIX_OPCODE attribute.)
Note that testing of the thus altered decoding has already been put in
place by "x86: correct decoding of packed-FP-only AVX encodings".
This can also be at least partly applied to scalar-FP-only insns (i.e.
V{,U}COMIS{S,D}) as well as the vector-FP forms of insns also allowing
scalar encodings (e.g. VADDP{S,D}).
Take the opportunity and also fix EVEX-encoded VMOVNTP{S,D} as well as
to-memory forms of VMOV{L,H}PS and both forms of VMOV{L,H}PD to wrongly
disassemble with only register operands.
Various AVX insns utilizing the X macro fail to reject F3/F2 embedded
prefix encodings. As the PREFIX_OPCODE attribute wasn't used by any
non-legacy-encoded insns so far, re-use it to achieve the intended
effect.
Register aliases (created e.g. via .set) check their target register at
the time of creation of the alias. While this makes sense, it's not
enough: The underlying register must also be "visible" at the time of
use. Wrong use of such aliases would lead to internal errors in e.g.
add_prefix() or build_modrm_byte().
Split the checking part of parse_real_register() into a new helper
function and use it also from the latter part of parse_register() (at
the same time replacing a minor open coded part of it).
Since parse_register() returning NULL already has a meaning, a fake new
"bad register" indicator gets added, which all callers need to check
for.
cpu/ChangeLog:
2020-06-02 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (define-bpf-isa): Set base-insn-bitsize to 64.
* bpf.opc (bpf_print_insn): Do not set endian_code here.
gas/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (md_begin): Pass CGEN_CPU_OPEN_INSN_ENDIAN to
bpf_cgen_cpu_open.
(md_assemble): Remove no longer needed hack.
opcodes/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* disassemble.c (disassemble_init_for_target): Set endian_code for
bpf targets.
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
* bpf-dis.c: Likewise.
The CGEN support code in opcodes accesses instruction contents using a
couple of functions defined in cgen-opc.c: cgen_get_insn_value and
cgen_put_insn_value. These functions use the "instruction endianness"
in the CPU description to order the read/written bytes.
The process of writing an instruction to the object file is:
a) cgen_put_insn_value ;; Writes out the opcodes.
b) ARCH_cgen_insert_operand
insert_normal
insert_1
cgen_put_insn_value ;; Writes out the bytes of the
;; operand.
Likewise, the process of reading an instruction from the object file
is:
a) cgen_get_insn_value ;; Reads the opcodes.
b) ARCH_cgen_extract_operand
extract_normal
extract_1
cgen_get_insn_value ;; Reads in the bytes of the
;; operand.
As can be seen above, cgen_{get,put}_insn_value are used to both
process the instruction opcodes (the constant fields conforming the
base instruction) and also the values of the instruction operands,
such as immediates.
This is problematic for architectures in which the endianness of
instructions is different to the endianness of data. An example is
BPF, where instructions are always encoded big-endian but the data may
be either big or little.
This patch changes the cgen_{get,put}_insn_value functions in order to
get an extra argument with the endianness to use, and adapts the
existin callers to these functions in order to provide cd->endian or
cd->insn_endian, whatever appropriate. Callers like extract_1 and
insert_1 pass cd->endian (since they are reading/writing operand
values) while callers reading/writing the base instruction pass
cd->insn_endian instead.
A few little adjustments have been needed in some existing CGEN based
ports:
* The BPF assembler uses cgen_put_insn_value. It has been adapted to
pass the new endian argument.
* The mep port has code in mep.opc that uses cgen_{get,put}_insn_value.
It has been adapted to pass the new endianargument. Ditto for a
call in the assembler.
Tested with --enable-targets=all.
Regested in all supported targets.
No regressions.
include/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/cgen.h: Get an `endian' argument in both
cgen_get_insn_value and cgen_put_insn_value.
opcodes/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* cgen-opc.c (cgen_get_insn_value): Get an `endian' argument.
(cgen_put_insn_value): Likewise.
(cgen_lookup_insn): Pass endianness to cgen_{get,put}_insn_value.
* cgen-dis.in (print_insn): Likewise.
* cgen-ibld.in (insert_1): Likewise.
(insert_1): Likewise.
(insert_insn_normal): Likewise.
(extract_1): Likewise.
* bpf-dis.c: Regenerate.
* bpf-ibld.c: Likewise.
* bpf-ibld.c: Likewise.
* cgen-dis.in: Likewise.
* cgen-ibld.in: Likewise.
* cgen-opc.c: Likewise.
* epiphany-dis.c: Likewise.
* epiphany-ibld.c: Likewise.
* fr30-dis.c: Likewise.
* fr30-ibld.c: Likewise.
* frv-dis.c: Likewise.
* frv-ibld.c: Likewise.
* ip2k-dis.c: Likewise.
* ip2k-ibld.c: Likewise.
* iq2000-dis.c: Likewise.
* iq2000-ibld.c: Likewise.
* lm32-dis.c: Likewise.
* lm32-ibld.c: Likewise.
* m32c-dis.c: Likewise.
* m32c-ibld.c: Likewise.
* m32r-dis.c: Likewise.
* m32r-ibld.c: Likewise.
* mep-dis.c: Likewise.
* mep-ibld.c: Likewise.
* mt-dis.c: Likewise.
* mt-ibld.c: Likewise.
* or1k-dis.c: Likewise.
* or1k-ibld.c: Likewise.
* xc16x-dis.c: Likewise.
* xc16x-ibld.c: Likewise.
* xstormy16-dis.c: Likewise.
* xstormy16-ibld.c: Likewise.
gas/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* cgen.c (gas_cgen_finish_insn): Pass the endianness to
cgen_put_insn_value.
(gas_cgen_md_apply_fix): Likewise.
(gas_cgen_md_apply_fix): Likewise.
* config/tc-bpf.c (md_apply_fix): Pass data endianness to
cgen_put_insn_value.
* config/tc-mep.c (mep_check_ivc2_scheduling): Pass endianness to
cgen_put_insn_value.
cpu/ChangeLog:
2020-06-02 Jose E. Marchesi <jose.marchesi@oracle.com>
* mep.opc (print_slot_insn): Pass the insn endianness to
cgen_get_insn_value.
This patch adds support for a new CGEN_OPEN_INSN_ENDIAN argument
for @arch@_cgen_cpu_open. This is useful for architectures in
which the endianness of the instruction words is not the same
than the endianness used for data.
An accompanying patch has been sent to the CGEN mailing list that
adds support for this argument on the CGEN side [1]. Its been
already pre-approved [2], and will be applied simultaneously with
this binutils series.
[1] https://sourceware.org/pipermail/cgen/2020q2/002733.html
[2] https://sourceware.org/pipermail/cgen/2020q2/002737.html
include/ChangeLog:
2020-06-04 Jose E. Marchesi <jemarch@gnu.org>
* opcode/cgen.h (enum cgen_cpu_open_arg): New value
CGEN_CPU_OPEN_INSN_ENDIAN.
opcodes/ChangeLog:
2020-06-04 Jose E. Marchesi <jemarch@gnu.org>
* cgen-dis.in (cpu_desc_list): New field `insn_endian'.
(print_insn_): Handle instruction endian.
* bpf-dis.c: Regenerate.
* bpf-desc.c: Regenerate.
* epiphany-dis.c: Likewise.
* epiphany-desc.c: Likewise.
* fr30-dis.c: Likewise.
* fr30-desc.c: Likewise.
* frv-dis.c: Likewise.
* frv-desc.c: Likewise.
* ip2k-dis.c: Likewise.
* ip2k-desc.c: Likewise.
* iq2000-dis.c: Likewise.
* iq2000-desc.c: Likewise.
* lm32-dis.c: Likewise.
* lm32-desc.c: Likewise.
* m32c-dis.c: Likewise.
* m32c-desc.c: Likewise.
* m32r-dis.c: Likewise.
* m32r-desc.c: Likewise.
* mep-dis.c: Likewise.
* mep-desc.c: Likewise.
* mt-dis.c: Likewise.
* mt-desc.c: Likewise.
* or1k-dis.c: Likewise.
* or1k-desc.c: Likewise.
* xc16x-dis.c: Likewise.
* xc16x-desc.c: Likewise.
* xstormy16-dis.c: Likewise.
* xstormy16-desc.c: Likewise.
binutils/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* objdump.c (disassemble_data): Set disasm_info.endian_code to
disasm_info.endian after the latter is initialized to the
endianness reported by BFD.
The original report is as follow,
https://sourceware.org/pipermail/binutils/2020-June/111383.html
Inlcude the bfd.h in the include/opcode/riscv.h may cause gdbserver fail
to build. I just want to use the `bfd_boolean` in the opcodes/riscv-opc.c,
but I didn't realize this cause the build failed. Fortunately, I can also
use the `int` as the function return types just like others in the
opcodes/riscv-opc.c.
include/
* opcode/riscv.h: Remove #include "bfd.h". And change the return
types of riscv_get_isa_spec_class and riscv_get_priv_spec_class
from bfd_boolean to int.
opcodes/
* riscv-opc.c (riscv_get_isa_spec_class): Change bfd_boolean to int.
(riscv_get_priv_spec_class): Likewise.
This patch adds semantic RTL descriptions to the eBPF instructions
defined in cpu/bpf.cpu. It also contains a couple of minor
improvements.
Tested in bpf-unknown-none targets.
No regressions.
cpu/ChangeLog:
2020-05-28 Jose E. Marchesi <jose.marchesi@oracle.com>
David Faust <david.faust@oracle.com>
* bpf.cpu (define-alu-insn-un): Add definitions of semantics.
(define-alu-insn-mov): Likewise.
(daib): Likewise.
(define-alu-instructions): Likewise.
(define-endian-insn): Likewise.
(define-lddw): Likewise.
(dlabs): Likewise.
(dlind): Likewise.
(dxli): Likewise.
(dxsi): Likewise.
(dsti): Likewise.
(define-ldstx-insns): Likewise.
(define-st-insns): Likewise.
(define-cond-jump-insn): Likewise.
(dcji): Likewise.
(define-condjump-insns): Likewise.
(define-call-insn): Likewise.
(ja): Likewise.
("exit"): Likewise.
(define-atomic-insns): Likewise.
(sem-exchange-and-add): New macro.
* bpf.cpu ("brkpt"): New instruction.
(bpfbf): Set word-bitsize to 32 and insn-endian big.
(h-gpr): Prefer r0 to `a' and r6 to `ctx'.
(h-pc): Expand definition.
* bpf.opc (bpf_print_insn): Set endian_code to BIG.
opcodes/ChangeLog:
2020-05-28 Jose E. Marchesi <jose.marchesi@oracle.com>
David Faust <david.faust@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-dis.c: Likewise.
In commit 6031ac352c I added some casts
to explicitly do conversions from unsigned to signed as 32-bit
quantities to address some bugs with different sizes of long and
bfd_signed_vma. Those casts were removed in the rewrite of the
sign-extension logic in commit 1d61b03226,
reintroducing the same bugs. This patch restores the casts.
2020-05-26 Sandra Loosemore <sandra@codesourcery.com>
opcodes/
* nios2-dis.c (nios2_print_insn_arg): Add explicit casts to
extractions of signed fields.
Accept vector alignment hints on z13 although they are ignored there.
The advantage is that any binary compiled for architecture level z13 may
run on z14 or later and benefit from vector alignment hints.
gas/ChangeLog:
2020-05-18 Stefan Schulze Frielinghaus <stefansf@linux.ibm.com>
* testsuite/gas/s390/zarch-z13.d: Add regexp checks for vector
load/store instruction variants with alignment hints.
* testsuite/gas/s390/zarch-z13.s: Emit new vector load/store
instruction variants with alignment hints.
opcodes/ChangeLog:
2020-05-18 Stefan Schulze Frielinghaus <stefansf@linux.ibm.com>
* s390-opc.txt: Relocate vector load/store instructions with
additional alignment parameter and change architecture level
constraint from z14 to z13.
1. Remove the -mriscv-isa-version and --with-riscv-isa-version options.
We can still use -march to choose the version for each extensions, so there is
no need to add these.
2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...].
Unlike the architecture string has specified by spec, ther is no need to do
the same thing for options.
3. Spilt the patches to reduce the burdens of review.
[PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions
to
[PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions
[PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default.
[PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version.
to
[PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version.
[PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version.
4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c.
The behavior is same as comparing the choosen privilege spec.
include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean.
(enum riscv_isa_spec_class): New enum class. All supported ISA spec
belong to one of the class
(struct riscv_ext_version): New structure holds version information
for the specific ISA.
* opcode/riscv-opc.h (DECLARE_CSR): There are two version information,
define_version and abort_version. The define_version means which
privilege spec is started to define the CSR, and the abort_version
means which privilege spec is started to abort the CSR. If the CSR is
valid for the newest spec, then the abort_version should be
PRIV_SPEC_CLASS_DRAFT.
(DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR.
* opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define
the current supported privilege spec versions.
(struct riscv_csr_extra): Add new fields to store more information
about the CSR. We use these information to find the suitable CSR
address when user choosing a specific privilege spec.
binutils * dwarf.c: Updated since DECLARE_CSR is changed.
opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store
all information about the supported spec and the corresponding ISA
versions. Currently, only Zicsr is supported to verify the
correctness of Z sub extension settings. Others will be supported
in the future patches.
(struct isa_spec_t, isa_specs): List for all supported ISA spec
classes and the corresponding strings.
(riscv_get_isa_spec_class): New function. Get the corresponding ISA
spec class by giving a ISA spec string.
* riscv-opc.c (struct priv_spec_t): New structure.
(struct priv_spec_t priv_specs): List for all supported privilege spec
classes and the corresponding strings.
(riscv_get_priv_spec_class): New function. Get the corresponding
privilege spec class by giving a spec string.
(riscv_get_priv_spec_name): New function. Get the corresponding
privilege spec string by giving a CSR version class.
* riscv-dis.c: Updated since DECLARE_CSR is changed.
* riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR
according to the chosen version. Build a hash table riscv_csr_hash to
store the valid CSR for the chosen pirv verison. Dump the direct
CSR address rather than it's name if it is invalid.
(parse_riscv_dis_option_without_args): New function. Parse the options
without arguments.
(parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to
parse the options without arguments first, and then handle the options
with arguments. Add the new option -Mpriv-spec, which has argument.
* riscv-dis.c (print_riscv_disassembler_options): Add description
about the new OBJDUMP option.
ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated
priv attributes according to the -mpriv-spec option.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function
get_default_version. It is used to find the default version for
the specific extension.
* elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters
default_major_version and default_minor_version. Add new bfd_boolean
parameter *use_default_version. Set it to TRUE if we need to call
the callback rps->get_default_version to find the default version.
(riscv_parse_std_ext): Call rps->get_default_version if we fail to find
the default version in riscv_parsing_subset_version, and then call
riscv_add_subset to add the subset into subset list.
(riscv_parse_prefixed_ext): Likewise.
(riscv_std_z_ext_strtab): Support Zicsr extensions.
* elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the
strings rather than characters.
riscv_merge_arch_attr_info): The callback function get_default_version
is only needed for assembler, so set it to NULL int the linker.
* elfxx-riscv.c (riscv_estimate_digit): Remove the static.
* elfxx-riscv.h: Updated.
gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated.
* config/tc-riscv.c (default_arch_with_ext, default_isa_spec):
Static variables which are used to set the ISA extensions. You can
use -march (or ELF build attributes) and -misa-spec to set them,
respectively.
(ext_version_hash): The hash table used to handle the extensions
with versions.
(init_ext_version_hash): Initialize the ext_version_hash according
to riscv_ext_version_table.
(riscv_get_default_ext_version): The callback function of
riscv_parse_subset_t. According to the choosed ISA spec,
get the default version for the specific extension.
(riscv_set_arch): Set the callback function.
(enum options, struct option md_longopts): Add new option -misa-spec.
(md_parse_option): Do not call riscv_set_arch for -march. We will
call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class
to set default_isa_spec class.
(riscv_after_parse_args): Call init_ext_version_hash to initialize the
ext_version_hash, and then call riscv_set_arch to set the architecture
with versions according to default_arch_with_ext.
* testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for
x extensions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we
already set it's version to 2p1 by march, so no need to use the default
2p2 version. For m-ext, we do not set the version by -march and ELF arch
attribute, so set the default 2p0 to it. For zicsr, it is not defined in
ISA spec 2p2, so set 0p0 to it.
* testsuite/gas/riscv/attribute-10.d: New testcase. The version of
zicsr is 2p0 according to ISA spec 20191213.
* config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT)
(DEFAULT_RISCV_ISA_SPEC): Default configure option settings.
You can set them by configure options --with-arch and
--with-isa-spec, respectively.
(riscv_set_default_isa_spec): New function used to set the
default ISA spec.
(md_parse_option): Call riscv_set_default_isa_spec rather than
call riscv_get_isa_spec_class directly.
(riscv_after_parse_args): If the -isa-spec is not set, then we
set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by
calling riscv_set_default_isa_spec.
* testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since
the --with-isa-spec may be set to different ISA spec.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* configure.ac: Add configure options, --with-arch and
--with-isa-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (default_priv_spec): Static variable which is
used to check if the CSR is valid for the chosen privilege spec. You
can use -mpriv-spec to set it.
(enum reg_class): We now get the CSR address from csr_extra_hash rather
than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX.
(riscv_init_csr_hashes): Only need to initialize one hash table
csr_extra_hash.
(riscv_csr_class_check): Change the return type to void. Don't check
the ISA dependency if -mcsr-check isn't set.
(riscv_csr_version_check): New function. Check and find the CSR address
from csr_extra_hash, according to default_priv_spec. Report warning
for the invalid CSR if -mcsr-check is set.
(reg_csr_lookup_internal): Updated.
(reg_lookup_internal): Likewise.
(md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed.
(enum options, struct option md_longopts): Add new GAS option -mpriv-spec.
(md_parse_option): Call riscv_set_default_priv_version to set
default_priv_spec.
(riscv_after_parse_args): If -mpriv-spec isn't set, then set the default
privilege spec to the newest one.
(enum riscv_csr_class, struct riscv_csr_extra): Move them to
include/opcode/riscv.h.
* testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want
to check the ISA dependency for CSR, so fix the spec version by adding
-mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some
version warnings for the test case.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case.
Check whether the CSR is valid when privilege version 1.9 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case.
Check whether the CSR is valid when privilege version 1.9.1 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case.
Check whether the CSR is valid when privilege version 1.10 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case.
Check whether the CSR is valid when privilege version 1.11 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option
setting. You can set it by configure option --with-priv-spec.
(riscv_set_default_priv_spec): New function used to set the default
privilege spec.
(md_parse_option): Call riscv_set_default_priv_spec rather than
call riscv_get_priv_spec_class directly.
(riscv_after_parse_args): If -mpriv-spec isn't set, then we set the
default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by
calling riscv_set_default_priv_spec.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since
the --with-priv-spec may be set to different privilege spec.
* testsuite/gas/riscv/priv-reg.d: Likewise.
* configure.ac: Add configure option --with-priv-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to
explicit_attr. Set it to TRUE if any ELF attribute is found.
(riscv_set_default_priv_spec): Try to set the default_priv_spec if
the priv attributes are set.
(md_assemble): Set the default_priv_spec according to the priv
attributes when we start to assemble instruction.
(riscv_write_out_attrs): Rename riscv_write_out_arch_attr to
riscv_write_out_attrs. Update the arch and priv attributes. If we
don't set the corresponding ELF attributes, then try to output the
default ones.
(riscv_set_public_attributes): If any ELF attribute or -march-attr
options is set (explicit_attr is TRUE), then call riscv_write_out_attrs
to update the arch and priv attributes.
(s_riscv_attribute): Make sure all arch and priv attributes are set
before any instruction.
* testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any
ELF attribute or -march-attr is set. If the priv attributes are not
set, then try to update them by the default setting (-mpriv-spec or
--with-priv-spec).
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec
set by priv attributes must be supported.
* testsuite/gas/riscv/attribute-05.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated
priv attributes according to the -mpriv-spec option.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg.d: Removed.
* testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the
CSR according to the priv spec 1.9.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the
CSR according to the priv spec 1.9.1.
* testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the
CSR according to the priv spec 1.10.
* testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the
CSR according to the priv spec 1.11.
* config/tc-riscv.c (md_show_usage): Add descriptions about
the new GAS options.
* doc/c-riscv.texi: Likewise.
