On IRIX 5, every global symbol that is not explicitly labelled as
being a function is assumed to be an object. There is no reason
why IRIX behaviour should extend to all MIPS targets, so limit this
to only IRIX targets.
gas/
PR 14798
* config/tc-mips.c (s_mips_globl): Only treat symbols that are
not explicitly labelled as BSF_OBJECTs for IRIX targets.
* testsuite/gas/mips/pr14798.s: New test source.
* testsuite/gas/mips/pr14798-irix.d: New test.
* testsuite/gas/mips/pr14798.d: Likewise.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
PR 14798
* testsuite/binutils-all/readelf.ss-mips: Update reference output.
* testsuite/binutils-all/readelf.ss-tmips: Likewise.
ld/
PR 14798
* testsuite/ld-mips-elf/reloc-6a.s: Specify .text section for
global code symbols.
* testsuite/ld-mips-elf/reloc-6b.s: Likewise.
PR 24538
gas * macro.c (get_any_string): Increase size of buffer used to hold
decimal value of expression result.
* dw2gencfi.c (get_debugseg_name): Handle an empty name.
* dwarf2dbg.c (get_filenum): Catch integer wraparound when
extending allocate file array.
(dwarf2_directive_filename): Add extra checks of the computed file
number.
* config/tc-arm.c (arm_tc_equal_in_insn): Insert copy of name into
warning hash table.
(s_arm_eabi_attribute): Check for obj_elf_vendor_attribute
returning -1.
* config/tc-i386.c (i386_output_nops): Catch an attempt to
generate nops of negative lengths.
* as.h (MAX_LITTLENUMS): Move definition to here from...
* config/atof-ieee.c: ...here.
* config/tc-aarch64.c: ...here.
* config/tc-arc.c: ...here.
* config/tc-arm.c: ...here.
* config/tc-epiphany.c: ...here.
* config/tc-i386.c: ...here.
* config/tc-ia64.c: ...here. (And correct the value).
* config/tc-m32c.c: ...here.
* config/tc-m32r.c: ...here.
* config/tc-metag.c: ...here.
* config/tc-microblaze.c: ...here.
* config/tc-nds32.c: ...here.
* config/tc-or1k.c: ...here.
* config/tc-score.c: ...here.
* config/tc-score7.c: ...here.
* config/tc-tic4x.c: ...here.
* config/tc-tilegx.c: ...here.
* config/tc-tilepro.c: ...here.
* config/tc-visium.c: ...here.
* config/tc-sh.c (md_assemble): Add check for an instruction with
no opcodes.
* config/tc-mips.c (mips_lookup_insn): Add check for very short
instruction name.
* config/tc-tic54x.c: Use unsigned chars to access is_end_of_line
array.
(tic54x_start_line_hook): Check for an empty line.
(next_line_shows_parallel): Do not walk off the end of the string.
(tic54x_macro_start): Check for too much macro nesting.
(tic54x_start_label): Add label_start parameter. Use this
parameter to check the first character of the label.
* config/tc-tic54x.h (TC_START_LABEL_WITHOUT_COLON): Pass
line_start variable to tic54x_start_label.
PR 24538
opcodes * ia64-opc.c (ia64_find_matching_opcode): Check for reaching the
end of the table prematurely.
Release 6 of the MIPS architecture does not have an ADDI instruction.
ADD/SUB instructions with immediate operands can be expanded to load
and immediate value and then perform the operation.
gas/
* config/tc-mips.c (macro) <M_ADD_I, M_SUB_I, M_DADD_I, M_DSUB_I>:
Add expansions for MIPS r6.
* testsuite/gas/mips/add.s: Enable tests for R6.
* testsuite/gas/mips/daddi.s: Annotate to test DADD for R6.
* testsuite/gas/mips/mipsr6@add.d: Likewise.
* gas/testsuite/gas/mips/mipsr6@dadd.d: New test.
* gas/testsuite/gas/mips/mips.exp: Run the new test.
opcodes/
* mips-opc.c (mips_opcodes): Enable ADD, SUB, DADD and DSUB
macros for R6.
Add paired load-link and store-conditional instructions to the
EVA ASE for MIPS32R6[1]. These instructions are optional within
the EVA ASE. Their presence is indicated by the XNP bit in the
Config5 register.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 230-231, pp. 357-360.
gas/
* config/tc-mips.c (mips_set_ase): Handle ASE_EVA_R6.
(macro) <M_LLWPE_AB, M_SCWPE_AB>: New cases.
(mips_after_parse_args): Translate EVA to EVA_R6.
* testsuite/gas/mips/ase-errors-1.s: Add new instructions.
* testsuite/gas/mips/eva.s: Likewise.
* testsuite/gas/mips/ase-errors-1.l: Check errors for
new instructions.
* testsuite/gas/mips/mipsr6@eva.d: Check new test cases.
include/
* opcode/mips.h (ASE_EVA_R6): New macro.
(M_LLWPE_AB, M_SCWPE_AB): New enum values.
opcodes/
* mips-dis.c (mips_calculate_combination_ases): Add ISA
argument and set ASE_EVA_R6 appropriately.
(set_default_mips_dis_options): Pass ISA to above.
(parse_mips_dis_option): Likewise.
* mips-opc.c (EVAR6): New macro.
(mips_builtin_opcodes): Add llwpe, scwpe.
Derived from patch authored by Andrew Bennett <andrew.bennett@imgtec.com>
Add several baseline MIPS32R6[1] and MIPS64R6[2] instructions
that were omitted from the initial spec. These instructions
are optional in implementations but not associated with any
ASE or pseudo-ASE. Their presence is indicated by the XNP bit
in the Config5 register.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 228-229, pp. 354-357.
[2] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 289-290 and pp. 458-460.
gas/
* config/tc-mips.c (macro) <M_LLWP_AB, M_LLDP_AB, M_SCWP_AB,
M_SCDP_AB>: New cases and expansions for paired instructions.
* testsuite/gas/mips/llpscp-32.s: New test source.
* testsuite/gas/mips/llpscp-64.s: Likewise.
* testsuite/gas/mips/llpscp-32.d: New test.
* testsuite/gas/mips/llpscp-64.d: Likewise.
* testsuite/gas/mips/mips.exp: Run the new tests.
* testsuite/gas/mips/r6.s: Add new instructions to test source.
* testsuite/gas/mips/r6-64.s: Likewise.
* testsuite/gas/mips/r6-64-n32.d: Check new instructions.
* testsuite/gas/mips/r6-64-n64.d: Likewise.
* testsuite/gas/mips/r6-n32.d: Likewise.
* testsuite/gas/mips/r6-n64.d: Likwwise.
* testsuite/gas/mips/r6.d: Likewise.
include/
* opcode/mips.h (M_LLWP_AB, M_LLDP_AB): New enum values.
(M_SCWP_AB, M_SCDP_AB): Likewise.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add llwp, lldp, scwp, scdp.
gas/
* config/tc-mips.c (mips_cpu_info_table): Add i6500. Update
default ASEs for i6400.
* doc/c-mips.texi (-march): Document i6500.
* testsuite/gas/mips/elf_mach_i6400.d: New test.
* testsuite/gas/mips/elf_mach_i6500.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
GAS does not enable implicit ASEs for most MIPS processors.
The rework of option handling done as part of .module implementation
left the implicit ASE logic broken and default enabled ASEs for
most processors did not get applied. This patch ensures the ASE
information is carried forward to the point where it is required.
gas/
* config/tc-mips.c (mips_set_options) <init_ase>: New field.
(file_mips_opts, mips_opts) <init_ase>: Initialize new field.
(file_mips_check_options): Propagate initial ASE settings.
(mips_after_parse_args, parse_code_option): Track the initial
ASE settings for a CPU.
(s_mipsset): Restore the initial ASE settings when reverting
to the default arch.
* testsuite/gas/mips/elf_mach_p6600.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test.
`-march=r5900' already enables the R5900 short loop workaround.
However, the R5900 ISA and most other MIPS ISAs are mutually
exclusive since R5900-specific instructions are generated as well.
The `-mfix-r5900' option can be used in combination with e.g.
`-mips2' or `-mips3' to generate generic MIPS binaries that also
work with the R5900 target.
This change has been tested with `make RUNTESTFLAGS=mips.exp
check-gas' for the targets `mipsr5900el-unknown-linux-gnu',
`mipsr5900el-elf' and `mips3-unknown-linux-gnu'.
gas/
* config/tc-mips.c (mips_fix_r5900, mips_fix_r5900_explicit):
New variables.
(options): Add OPTION_FIX_R5900 and OPTION_NO_FIX_R5900
enumeration constants.
(md_longopts): Add "mfix-r5900" and "mno-fix-r5900" options.
(can_swap_branch_p, md_parse_option, mips_after_parse_args):
Handle the new options.
(md_show_usage): Document the `-mfix-r5900' option.
* doc/as.texi: Likewise.
* doc/c-mips.texi: Likewise.
* testsuite/gas/mips/mips.exp: Run R5900 dump tests.
* testsuite/gas/mips/r5900-fix.d: Test `-mfix-r5900' option.
* testsuite/gas/mips/r5900-fix.s: Likewise.
* testsuite/gas/mips/r5900-no-fix.d: Test `-mno-fix-r5900'.
* testsuite/gas/mips/r5900-no-fix.s: Likewise.
* testsuite/gas/mips/r5900.s: Extend the R5900 short loop fix
test with border cases.
* testsuite/gas/mips/r5900.d: Add extra expected disassembly.
* config/tc-mips.c (can_swap_branch_p): Clarify the R5900 short
loop hardware bug conditions. Correct note on the R5900
instruction count short loop fix.
The MMI instruction set has been implemented in many Loongson
processors. There is a lot of software optimized for MMI. This patch
splits MMI from loongson2f/3a, and adds GAS and disassembler options for
MMI instructions.
2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com>
Maciej W. Rozycki <macro@mips.com>
bfd/
* elfxx-mips.c (print_mips_ases): Add MMI extension.
binutils/
* readelf.c (print_mips_ases): Add MMI extension.
gas/
* NEWS: Mention MultiMedia extensions Instructions (MMI)
support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and
OPTION_NO_LOONGSON_MMI.
(md_longopts): Likewise.
(mips_ases): Define availability for MMI.
(mips_convert_ase_flags): Map ASE_LOONGSON_MMI to
AFL_ASE_LOONGSON_MMI.
(mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a.
(md_show_usage): Add help for -mloongson-mmi and
-mno-loongson-mmi.
* doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi.
* doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi,
.set loongson-mmi and .set noloongson-mmi.
* testsuite/gas/mips/loongson-2f.d: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-2f.s: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.s: Here.
* testsuite/gas/mips/loongson-3a.d: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-3a.s: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.s: Here.
* testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and
loongson-3a-mmi tests.
include/
* elf/mips.h (AFL_ASE_MMI): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI.
* opcode/mips.h (ASE_LOONGSON_MMI): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add MMI to loongson2f and
loongson3a descriptors.
(parse_mips_ase_option): Handle -M loongson-mmi option.
(print_mips_disassembler_options): Document -M loongson-mmi.
* mips-opc.c (LMMI): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI
instructions.
In the microMIPS mode also accept %half, %got, %call, %got_hi, %got_lo,
%call_hi, %call_lo, %neg, %got_page, %highest, %got_disp, %tlsgd,
%tlsldm, %dtprel_hi, %dtprel_lo, %gottprel, %tprel_hi and %tprel_lo
percent-ops with macros, so that they can be used with instructions that
expand into sequences if relocation is required due to their limited
offset span, such as LL, LWL, etc., fixing GAS assertions:
.../gas/testsuite/gas/mips/elf-rel28.s: Assembler messages:
.../gas/testsuite/gas/mips/elf-rel28.s:17: Internal error in macro_build at .../gas/config/tc-mips.c:8854.
Please report this bug.
observed if an attempt is made to assemble the `elf-rel28.s' test case
modified to use one of the affected instructions to microMIPS code.
gas/
* config/tc-mips.c (macro_build) <'i', 'j'>: Also accept
BFD_RELOC_16, BFD_RELOC_MIPS_GOT16, BFD_RELOC_MIPS_CALL16,
BFD_RELOC_MIPS_GOT_HI16, BFD_RELOC_MIPS_GOT_LO16,
BFD_RELOC_MIPS_CALL_HI16, BFD_RELOC_MIPS_CALL_LO16,
BFD_RELOC_MIPS_SUB, BFD_RELOC_MIPS_GOT_PAGE,
BFD_RELOC_MIPS_HIGHEST, BFD_RELOC_MIPS_GOT_DISP,
BFD_RELOC_MIPS_TLS_GD, BFD_RELOC_MIPS_TLS_LDM,
BFD_RELOC_MIPS_TLS_DTPREL_HI16, BFD_RELOC_MIPS_TLS_DTPREL_LO16,
BFD_RELOC_MIPS_TLS_GOTTPREL, BFD_RELOC_MIPS_TLS_TPREL_HI16 and
BFD_RELOC_MIPS_TLS_TPREL_LO16 relocations if in the microMIPS
mode.
* testsuite/gas/mips/elf-rel28-lldscd-n32.d: New test.
* testsuite/gas/mips/elf-rel28-lldscd-micromips-n32.d: New test.
* testsuite/gas/mips/elf-rel28-lldscd-n64.d: New test.
* testsuite/gas/mips/elf-rel28-lldscd-micromips-n64.d: New test.
* testsuite/gas/mips/elf-rel28.s: Add instruction selection.
* testsuite/gas/mips/mips.exp: Run the new tests.
Add support for the Global INValidate Application Specific Extension
for Release 6 of the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 187-191
bfd/
* elfxx-mips.c (print_mips_ases): Add GINV extension.
binutils/
* readelf.c (print_mips_ases): Add GINV extension.
gas/
* NEWS: Mention MIPS Global INValidate ASE support.
* config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV.
(md_longopts): Likewise.
(mips_ases): Define availability for GINV.
(mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV.
(md_show_usage): Add help for -mginv and -mno-ginv.
* doc/as.texinfo: Document -mginv, -mno-ginv.
* doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and
.set noginv.
* testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV
ASE.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/ase-errors-1.l: Likewise.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ginv.d: New test.
* testsuite/gas/mips/ginv-err.d: New test.
* testsuite/gas/mips/ginv-err.l: New test stderr output.
* testsuite/gas/mips/ginv.s: New test source.
* testsuite/gas/mips/ginv-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
* elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros.
(AFL_ASE_MASK): Update to include AFL_ASE_GINV.
* opcode/mips.h: Document "+\" operand format.
(ASE_GINV): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and
mips64r6 descriptors.
(parse_mips_ase_option): Handle -Mginv option.
(print_mips_disassembler_options): Document -Mginv.
* mips-opc.c (decode_mips_operand) <+\>: New operand format.
(GINV): New macro.
(mips_opcodes): Define ginvi and ginvt.
Add support for the CRC Application Specific Extension for Release 6 of
the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 143-148
[2] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 165-170
ChangeLog:
bfd/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elfxx-mips.c (print_mips_ases): Add CRC.
binutils/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* readelf.c (print_mips_ases): Add CRC.
gas/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC.
(md_longopts): Likewise.
(md_show_usage): Add help for -mcrc and -mno-crc.
(mips_ases): Define availability for CRC and CRC64.
(mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC.
* doc/as.texinfo: Document -mcrc, -mno-crc.
* doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and
.set no-crc.
* testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC
ASE.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ase-errors-1.s: Likewise.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/crc.d: New test.
* testsuite/gas/mips/crc64.d: New test.
* testsuite/gas/mips/crc-err.d: New test.
* testsuite/gas/mips/crc64-err.d: New test.
* testsuite/gas/mips/crc-err.l: New test stderr output.
* testsuite/gas/mips/crc64-err.l: New test stderr output.
* testsuite/gas/mips/crc.s: New test source.
* testsuite/gas/mips/crc64.s: New test source.
* testsuite/gas/mips/crc-err.s: New test source.
* testsuite/gas/mips/crc64-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elf/mips.h (AFL_ASE_CRC): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_CRC.
* opcode/mips.h (ASE_CRC): New macro.
* opcode/mips.h (ASE_CRC64): Likewise.
opcodes/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs.
* mips-opc.c (CRC, CRC64): New macros.
(mips_builtin_opcodes): Define crc32b, crc32h, crc32w,
crc32cb, crc32ch and crc32cw for CRC. Define crc32d and
crc32cd for CRC64.
Match commit 4ffff32f75 ("Match mips_optimize to the -O option
supplied") and adjust `--help' output for `-O0', `-O', `-O1' and `-O2'
options.
gas/
* config/tc-mips.c (md_show_usage): Correct help text for `-O0'
and `-O'. Mention `-O1'. Add `-O2' and its description.
Remove an issue with `as --help' always reporting `o32' as the default
ABI regardless of what the default actually is, originally caused by
commit cac012d6d3 ("check mips abi x linker emulation compatibility"),
<https://sourceware.org/ml/binutils/2003-05/msg00187.html> missing an
update here.
gas/
* config/tc-mips.c (md_show_usage): Correctly indicate the
configuration-specific default ABI.
Correct a commit 25499ac7ee ("MIPS16e2: Add MIPS16e2 ASE support") GAS
bug and add missing help text for the `-mmips16e2' and `-mno-mips16e2'
options added with said commit.
gas/
* config/tc-mips.c (md_show_usage): Report `-mmips16e2' and
`-mno-mips16e2' options.
Fix a bug in MIPS n32 ELF object file generation and make such objects
consistent with the n32 BFD requested, by presetting the EF_MIPS_ABI2
flag in the `e_flags' member of the newly created ELF file header, as it
is this flag that tells n32 objects apart from o32 objects.
This flag will then stay set through to output file generation for
writers such as GAS or GDB's `generate-core-file' command. Readers will
overwrite the whole of `e_flags' along with the rest of the ELF file
header in `elf_swap_ehdr_in' and then verify in `mips_elf_n32_object_p'
that the flag is still set before accepting an input file as an n32
object.
The issue was discovered with GDB's `generate-core-file' command making
o32 core files out of n32 debuggees.
bfd/
* elfn32-mips.c (mips_elf_n32_mkobject): New prototype and
function.
(bfd_elf32_mkobject): Use `mips_elf_n32_mkobject' rather than
`_bfd_mips_elf_mkobject'.
gas/
* config/tc-mips.c (mips_elf_final_processing): Don't set
EF_MIPS_ABI2 in `e_flags'.
If a .stabs directive was used before another .set directive in a MIPS
source file, s_mips_stab would call mips_mark_labels without having
initialized the mips_opts structure yet. Fix this by calling
file_mips_check_options which will initialize mips_opts if necessary.
gas/
PR gas/21762
* config/tc-mips.c (s_mips_stab): Insert call to
file_mips_check_options.
* testsuite/gas/mips/micromips@stabs-symbol-type.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
* testsuite/gas/mips/mips16@stabs-symbol-type.d: New test.
* testsuite/gas/mips/stabs-symbol-type.d: New test.
* testsuite/gas/mips/stabs-symbol-type.s: New test source.
Fix a bug in commit 8b10b0b3e1 ("MIPS: Add options to control branch
ISA checks") and with the `-mignore-branch-isa' command-line option also
lift a GAS check for invalid MIPS16 branches between ISA modes, which is
made separately from regular MIPS and microMIPS checks.
gas/
* config/tc-mips.c (md_convert_frag): Respect
`mips_ignore_branch_isa'.
* testsuite/gas/mips/branch-local-5.d: New test.
* testsuite/gas/mips/branch-local-n32-5.d: New test.
* testsuite/gas/mips/branch-local-n64-5.d: New test.
* testsuite/gas/mips/branch-local-6.d: New test.
* testsuite/gas/mips/branch-local-n32-6.d: New test.
* testsuite/gas/mips/branch-local-n64-6.d: New test.
* testsuite/gas/mips/branch-local-7.d: New test.
* testsuite/gas/mips/branch-local-n32-7.d: New test.
* testsuite/gas/mips/branch-local-n64-7.d: New test.
* testsuite/gas/mips/branch-local-ignore-5.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-5.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-5.d: New test.
* testsuite/gas/mips/branch-local-ignore-6.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-6.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-6.d: New test.
* testsuite/gas/mips/branch-local-5.l: New stderr output.
* testsuite/gas/mips/branch-local-6.l: New stderr output.
* testsuite/gas/mips/branch-local-5.s: New test source.
* testsuite/gas/mips/branch-local-6.s: New test source.
* testsuite/gas/mips/branch-local-7.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Use a switch on the relaxation type rather than a chain of conditionals
in microMIPS fixup creation, improving source code structure and aiding
the compiler with code generation.
gas/
* config/tc-mips.c (md_convert_frag): Use a switch on the
microMIPS relaxation type rather than a chain of conditionals.
There is no need to use a helper expression in the creation of fixups
made from a frag's symbol and offset, because a simple `symbol+offset'
expression can be handled directly, with the use of a `fix_new' rather
than a `fix_new_exp' call. Rewrite `md_convert_frag' using `fix_new'
then and remove all the unneeded helper expressions, simplifying code.
gas/
* config/tc-mips.c (md_convert_frag): Rewrite `fix_new_exp'
calls in terms of `fix_new'.
Use frag symbols with a non-zero offset directly in `fix_new_exp' calls
made in PIC branch relaxation. There is no need here to make a helper
symbol to hold the result of a `symbol+offset' calculation requested as
only branches to local symbols are relaxed and in this case the LO16
part of the PIC address load sequence will have the offset accounted for
in calculation against the local GOT entry retrieved as the GOT16 high
part. Consequently actual code produed is identical whether a helper
symbol is used or the original `symbol+offset' expression used directly.
Verify that this is indeed the case with GAS and LD tests.
gas/
* config/tc-mips.c (md_convert_frag): Don't make a helper
expression symbol for `fix_new_exp' called with a non-zero
offset.
* testsuite/gas/mips/relax-offset.d: New test.
* testsuite/gas/mips/mips1@relax-offset.d: New test.
* testsuite/gas/mips/r3000@relax-offset.d: New test.
* testsuite/gas/mips/r3900@relax-offset.d: New test.
* testsuite/gas/mips/micromips@relax-offset.d: New test.
* testsuite/gas/mips/relax-offset.l: New stderr output.
* testsuite/gas/mips/relax-offset.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/relax-offset.dd: New test.
* testsuite/ld-mips-elf/relax-offset.gd: New test.
* testsuite/ld-mips-elf/relax-offset-umips.dd: New test.
* testsuite/ld-mips-elf/relax-offset-umips.gd: New test.
* testsuite/ld-mips-elf/relax-offset.ld: New test linker script.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
(prune_warnings): New temporary procedure.
Complement commit a92713e60e ("Preparse MIPS instructions into
tokens"), <https://sourceware.org/ml/binutils/2013-07/msg00143.html>,
and update `match_float_constant' and `match_operand' function
descriptions according to semantics changes.
gas/
* config/tc-mips.c (match_float_constant): Update description.
(match_operand): Likewise.
Add support for the base and Virtualization ASE microMIPS instructions
as per the architecture specifications[1][2][3][4].
Most of this change by Andrew Bennett.
[1] "MIPS Architecture for Programmers Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit
Instructions", p. 340
[2] "microMIPS32 Architecture for Programmers Volume IV-i:
Virtualization Module of the microMIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00848, Revision 1.06,
December 10, 2013, Section 6.1 "Overview", pp. 133, 136
[3] "MIPS Architecture for Programmers Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit
Instructions", pp. 415, 444
[4] "microMIPS64 Architecture for Programmers Volume IV-i:
Virtualization Module of the microMIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00849, Revision 1.06,
December 10, 2013, Section 6.1 "Overview", pp. 134-135, 139-140
binutils/
* NEWS: Mention microMIPS XPA support.
opcodes/
* micromips-opc.c (XPA, XPAVZ): New macros.
(micromips_opcodes): Add "mfhc0", "mfhgc0", "mthc0" and
"mthgc0".
gas/
* config/tc-mips.c (mips_ases): Add microMIPS XPA support.
* testsuite/gas/mips/micromips@xpa.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test. Enable
`xpa-virt-err' test for `micromips'.
Correct a commit 7d64c587c1 ("Add support for the MIPS eXtended
Physical Address (XPA) ASE.") bug, causing XPA base and Virtualization
ASE instructions to be wrongly always enabled with the selection of the
MIPS32r2 or higher ISA.
For example this source assembles successfully as shown below:
$ cat xpa.s
mfhc0 $2, $1
$ as -32 -mips32 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32 (mips32) `mfhc0 $2,$1'
$ as -32 -mips32r2 -o xpa.o xpa.s
$ objdump -d xpa.o
xpa.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <.text>:
0: 40420800 mfhc0 v0,c0_random
...
$
To address this issue remove the I33 (INSN_ISA32R2) marking from all XPA
instructions in the opcode table. Additionally, for XPA Virtualization
ASE instructions implement an XPAVZ (ASE_XPA_VIRT) combination ASE flag
and use it in place of IVIRT|XPA (ASE_VIRT|ASE_XPA).
Now the same source is correctly rejected unless the `-mxpa' option is
also used:
$ as -32 -mips32r2 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mfhc0 $2,$1'
$ as -32 -mips32r2 -mxpa -o xpa.o xpa.s
$
Add test cases for XPA base and XPA Virtualization ASE instructions.
Parts of this change by Andrew Bennett.
include/
* opcode/mips.h (ASE_XPA_VIRT): New macro.
opcodes/
* mips-dis.c (mips_calculate_combination_ases): Handle the
ASE_XPA_VIRT flag.
(parse_mips_ase_option): New function.
(parse_mips_dis_option): Factor out ASE option handling to the
new function. Call `mips_calculate_combination_ases'.
* mips-opc.c (XPAVZ): New macro.
(mips_builtin_opcodes): Correct ISA and ASE flags for "mfhc0",
"mfhgc0", "mthc0" and "mthgc0".
gas/
* config/tc-mips.c (mips_set_ase): Handle the ASE_XPA_VIRT flag.
* testsuite/gas/mips/xpa.d: Remove `xpa' from `-M' in `objdump'
flags. Add `-mvirt' to `as' flags.
* testsuite/gas/mips/xpa-err.d: New test.
* testsuite/gas/mips/xpa-virt-err.d: New test.
* testsuite/gas/mips/xpa-err.l: New stderr output.
* testsuite/gas/mips/xpa-virt-err.l: New stderr output.
* testsuite/gas/mips/xpa-err.s: New test source.
* testsuite/gas/mips/xpa-virt-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
* testsuite/binutils-all/mips/mips-xpa-virt-1.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-2.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-3.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-4.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
Correct a commit 25499ac7ee ("MIPS16e2: Add MIPS16e2 ASE support") GAS
bug with the handling of the ASE_MIPS16E2_MT combination ASE flag, which
is not correctly calculated as `.set nomips16e2' and `.set nomt'
pseudo-ops are processed. This leads to code like:
$ cat foo.s
.set nomt
evpe
.align 4, 0
$ cat bar.s
.set nomips16e2
dvpe
.align 4, 0
$
to successfully assemble where it should not:
$ as -32 -mips32r3 -mmt -mips16 -mmips16e2 -o foo.o foo.s
$ as -32 -mips32r3 -mmt -mips16 -mmips16e2 -o bar.o bar.s
$ objdump -m mips:16 -d foo.o
foo.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <.text>:
0: f027 6700 evpe
...
bar.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <.text>:
0: f026 6700 dvpe
...
$
This happens because ASE_MIPS16E2_MT once set in `mips_set_ase' is never
cleared. Fix the problem by clearing it there before it is calculated
based on the ASE_MT and ASE_MIPS16E2 flags, making assembly fail as
expected:
$ as -32 -mips32r3 -mmt -mips16 -mmips16e2 -o foo.o foo.s
foo.s: Assembler messages:
foo.s:2: Error: opcode not supported on this processor: mips32r3 (mips32r3) `evpe'
$ as -32 -mips32r3 -mmt -mips16 -mmips16e2 -o bar.o bar.s
bar.s: Assembler messages:
bar.s:2: Error: opcode not supported on this processor: mips32r3 (mips32r3) `dvpe'
$
gas/
* config/tc-mips.c (mips_set_ase): Clear the ASE_MIPS16E2_MT
flag before recalculating.
* testsuite/gas/mips/mips16e2-mt-err.d: New test.
* testsuite/gas/mips/mips16e2-mt-err.l: New stderr output.
* testsuite/gas/mips/mips16e2-mt-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with
the MIPS16e2 ASE as per documentation, including in particular:
1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW
MIPS16e2 instructions[1], for assembly and disassembly,
2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE
regular MIPS instructions[2], for assembly and disassembly,
3. ELF binary file annotation for the interAptiv MR2 MIPS architecture
extension.
4. Support for interAptiv MR2 architecture selection for assembly, in
the form of the `-march=interaptiv-mr2' command-line option and its
corresponding `arch=interaptiv-mr2' setting for the `.set' and
`.module' pseudo-ops.
5. Support for interAptiv MR2 architecture selection for disassembly,
in the form of the `mips:interaptiv-mr2' target architecture, for
use e.g. with the `-m' command-line option for `objdump'.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
Imagination Technologies Ltd., Document Number: MD00904, Revision
02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific
Instructions", pp. 878-883
[2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917
include/
* elf/mips.h (E_MIPS_MACH_IAMR2): New macro.
(AFL_EXT_INTERAPTIV_MR2): Likewise.
* opcode/mips.h: Document new operand codes defined.
(INSN_INTERAPTIV_MR2): New macro.
(INSN_CHIP_MASK): Adjust accordingly.
(CPU_INTERAPTIV_MR2): New macro.
(cpu_is_member) <CPU_INTERAPTIV_MR2>: New case.
(MIPS16_ALL_ARGS): Rename to...
(MIPS_SVRS_ALL_ARGS): ... this.
(MIPS16_ALL_STATICS): Rename to...
(MIPS_SVRS_ALL_STATICS): ... this.
bfd/
* archures.c (bfd_mach_mips_interaptiv_mr2): New macro.
* cpu-mips.c (I_interaptiv_mr2): New enum value.
(arch_info_struct): Add "mips:interaptiv-mr2" entry.
* elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New
case.
(mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
(mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and
`bfd_mach_mips_interaptiv_mr2' entries.
* bfd-in2.h: Regenerate.
opcodes/
* mips-formats.h (INT_BIAS): New macro.
(INT_ADJ): Redefine in INT_BIAS terms.
* mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry.
(mips_print_save_restore): New function.
(print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment.
(validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort'
call.
(print_insn_args): Handle OP_SAVE_RESTORE_LIST.
(print_mips16_insn_arg): Call `mips_print_save_restore' for
OP_SAVE_RESTORE_LIST handling, factored out from here.
* mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case.
(RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros.
(mips_builtin_opcodes): Add "restore" and "save" entries.
* mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases.
(IAMR2): New macro.
(mips16_opcodes): Add "copyw" and "ucopyw" entries.
binutils/
* readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
* NEWS: Mention Imagination interAptiv MR2 processor support.
gas/
* config/tc-mips.c (validate_mips_insn): Handle
OP_SAVE_RESTORE_LIST specially.
(mips_encode_save_restore, mips16_encode_save_restore): New
functions.
(match_save_restore_list_operand): Factor out SAVE/RESTORE
operand insertion into the instruction word or halfword to these
new functions.
(mips_cpu_info_table): Add "interaptiv-mr2" entry.
* doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
`-march=' argument list.
Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
Improve out-of-range operand error diagnostics for invalid values in the
[32768,65535] range used for a signed 16-bit immediate, making the
message consistent with that used for other invalid values, e.g.:
foo.s:1: Error: operand 2 must be an immediate expression `addiu $2,$gp,32768'
foo.s:2: Error: invalid operands `lw $2,32768($gp)'
vs:
foo.s:3: Error: operand 3 out of range `addiu $2,$gp,-32769'
foo.s:4: Error: operand 2 out of range `lw $2,-32769($gp)'
This case does not currently trigger however, for two reasons.
First, for regular MIPS and microMIPS assembly in the case of no match
caused by `match_int_operand' here, the function is always called again
from `mips_ip' via `match_insns', `match_insn' and then `match_operand'
for the same opcode table's entry with `lax_match' set to TRUE, in which
case the attempt to match succeeds and no error is issued.
Second, in the case of MIPS16 assembly no call to `match_int_operand' is
made at all for signed 16-bit immediates, because such immediates are
currently only matched with extensible instructions, and these are
handled in `match_mips16_insn' via `match_expression' directly rather
than via `match_operand'.
This will change for MIPS16 code with MIPS16e2 support introduced, where
non-extensible instructions accepting signed 16-bit immediates will be
added, so make the case work well right from the start:
foo.s:1: Error: operand 3 out of range `addiu $2,$gp,32768'
foo.s:2: Error: operand 2 out of range `lw $2,32768($gp)'
gas/
* config/tc-mips.c (match_int_operand): Call
`match_out_of_range' before returning failure for 0x8000-0xffff
values conditionally allowed.
Improve operand error diagnostics for non-constant expressions used for
a 16-bit immediate, making the message more descriptive and indicating
the offending operand, e.g.:
foo.s:1: Error: invalid operands `lui $2,foo-bar'
will show as:
foo.s:1: Error: operand 2 must be constant `lui $2,foo-bar'
This case does not currently trigger however, for two reasons.
First, for regular MIPS and microMIPS assembly in the case of no match
caused by `match_int_operand' here, the function is always called again
from `mips_ip' via `match_insns', `match_insn' and then `match_operand'
for the same opcode table's entry with `lax_match' set to TRUE, in which
case the attempt to match succeeds and no error is issued.
Second, in the case of MIPS16 assembly no call to `match_int_operand' is
made at all for 16-bit immediates, because such immediates are currently
only matched with extensible instructions, and these are handled in
`match_mips16_insn' via `match_expression' directly rather than via
`match_operand'.
This will change for MIPS16 code with MIPS16e2 support introduced, where
non-extensible instructions accepting 16-bit immediates will be added,
so make the case work well right from the start.
gas/
* config/tc-mips.c (match_int_operand): Call
`match_not_constant' before returning failure for a non-constant
16-bit immediate conditionally allowed.
Improve bignum operand error diagnostics for cases where a constant
would be accepted and report them as range errors, also indicating the
offending operand and instruction, e.g.:
$ cat bignum.s
addiu $2, 0x10000000000000000
break 0x10000000000000000
$ as -o bignum.o bignum.s
bignum.s:1: Error: bignum invalid
bignum.s:2: Error: operand 1 must be constant `break 0x10000000000000000'
$
now show as:
$ as -o bignum.o bignum.s
bignum.s:1: Error: operand 2 out of range `addiu $2,0x10000000000000000'
bignum.s:2: Error: operand 1 out of range `break 0x10000000000000000'
$
gas/
* config/tc-mips.c (match_const_int): Call `match_out_of_range'
rather than `match_not_constant' for unrelocated operands
retrieved as an `O_big' expression.
(match_int_operand): Call `match_out_of_range' for relocatable
operands retrieved as an `O_big' expression.
(match_mips16_insn): Call `match_out_of_range' for relaxable
operands retrieved as an `O_big' expression.
* testsuite/gas/mips/addiu-error.d: New test.
* testsuite/gas/mips/mips16@addiu-error.d: New test.
* testsuite/gas/mips/micromips@addiu-error.d: New test.
* testsuite/gas/mips/break-error.d: New test.
* testsuite/gas/mips/lui-1.l: Adjust error message.
* testsuite/gas/mips/addiu-error.l: New stderr output.
* testsuite/gas/mips/mips16@addiu-error.l: New stderr output.
* testsuite/gas/mips/micromips@addiu-error.l: New stderr output.
* testsuite/gas/mips/break-error.l: New stderr output.
* testsuite/gas/mips/addiu-error.s: New test source.
* testsuite/gas/mips/break-error.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Improve non-immediate operand error diagnostics for extensible MIPS16
instructions and make it match corresponding regular MIPS and microMIPS
handling, e.g:
$ cat addiu.s
addiu $4, $3, $2
$ as -o addiu.o addiu.s
addiu.s: Assembler messages:
addiu.s:1: Error: operand 3 must be an immediate expression `addiu $4,$3,$2'
$ as -mips16 -o addiu.o addiu.s
addiu.s: Assembler messages:
addiu.s:1: Error: invalid operands `addiu $4,$3,$2'
$
To do so observe that for extensible MIPS16 instructions and a non-PC
relative operand this case is handled by an explicit OT_INTEGER check in
`match_mips16_insn' returning a failure right away and consequently
preventing a call to `match_expression' from being made. As from commit
d436c1c2e8 ("Improve error reporting for register expressions"),
<https://sourceware.org/ml/binutils/2013-08/msg00134.html>, however the
check has become redundant as `match_expression' now only ever returns
success for OT_INTEGER argument tokens, and a special case of an OT_CHAR
`(' token already handled by `match_mips16_insn' just ahead of the
`match_expression' call. Previously it also returned success for OT_REG
argument tokens.
Let the call to `match_expression' always happen then, yielding the same
failure for the affected cases, however with more accurate diagnostics
provided by the call making reporting consistent:
$ as -mips16 -o addiu.o addiu.s
addiu.s: Assembler messages:
addiu.s:1: Error: operand 3 must be an immediate expression `addiu $4,$3,$2'
$
gas/
* config/tc-mips.c (match_mips16_insn): Remove the explicit
OT_INTEGER check before the `match_expression' call.
* testsuite/gas/mips/mips16-insn-e.l: Adjust messages.
* testsuite/gas/mips/mips16-32@mips16-insn-e.l: Likewise.
* testsuite/gas/mips/mips16-64@mips16-insn-e.l: Likewise.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: Likewise.
* testsuite/gas/mips/mips16-reg-error.d: New test.
* testsuite/gas/mips/mips16-reg-error.l: New stderr output.
* testsuite/gas/mips/mips16-reg-error.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
Improve disallowed relocation operand error diagnostics for MIPS16 code
and make it match corresponding regular MIPS and microMIPS handling,
e.g:
$ cat sltu.s
sltu $2, %lo(foo)
$ as -o sltu.o sltu.s
sltu.s: Assembler messages:
sltu.s:1: Error: operand 2 must be constant `sltu $2,%lo(foo)'
$ as -mips16 -o sltu.o sltu.s
sltu.s: Assembler messages:
sltu.s:1: Error: invalid operands `sltu $2,%lo(foo)'
$
To do so call `match_not_constant' from `match_mips16_insn' whenever a
disallowed relocation operation has been noticed, like `match_const_int'
does, making reporting consistent:
$ as -mips16 -o sltu.o sltu.s
sltu.s: Assembler messages:
sltu.s:1: Error: operand 2 must be constant `sltu $2,%lo(foo)'
$
gas/
* config/tc-mips.c (match_mips16_insn): Call
`match_not_constant' for a disallowed relocation operation.
* testsuite/gas/mips/mips16-reloc-error.d: New test.
* testsuite/gas/mips/mips16-reloc-error.l: New stderr output.
* testsuite/gas/mips/mips16-reloc-error.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
