This commit adds the ability for bare metal RISC-V target to generate
core files from within GDB.
The intended use case is that a user will connect to a remote bare
metal target, debug up to some error condition, then generate a core
file in the normal way using:
(gdb) generate-core-file
This core file can then be used to revisit the state of the remote
target without having to reconnect to the remote target.
The core file creation code is split between two new files. In
elf-none-tdep.c is code for any architecture with the none
ABI (i.e. bare metal) when the BFD library is built with ELF support.
In riscv-none-tdep.c are the RISC-V specific parts. This is where the
regset and regcache_map_entry structures are defined that control how
registers are laid out in the core file. As this file could (in
theory at least) be used for a non-ELF bare metal RISC-V target, the
calls into elf-none-tdep.c are guarded with '#ifdef HAVE_ELF'.
Currently for RISC-V only the x-regs and f-regs (if present) are
written out. In future commits I plan to add support for writing out
the RISC-V CSRs.
The core dump format is based around generating an ELF containing
sections for the writable regions of memory that a user could be
using. Which regions are dumped rely on GDB's existing common core
dumping code, GDB will attempt to figure out the stack and heap as
well as copying out writable data sections as identified by the
original ELF.
Register information is added to the core dump using notes, just as it
is for Linux of FreeBSD core dumps. The note types used consist of
the 3 basic types you would expect in a OS based core dump,
NT_PRPSINFO, NT_PRSTATUS, NT_FPREGSET.
The layout of these notes differs slightly (due to field sizes)
between RV32 and RV64. Below I describe the data layout for each
note. In all cases, all padding fields should be set to zero.
Note NT_PRPSINFO is optional. Its data layout is:
struct prpsinfo32_t /* For RV32. */
{
uint8_t padding[32];
char fname[16];
char psargs[80];
}
struct prpsinfo64_t /* For RV64. */
{
uint8_t padding[40];
char fname[16];
char psargs[80];
}
Field 'fname' - null terminated string consisting of the basename of
(up to the fist 15 characters of) the executable. Any additional
space should be set to zero. If there's no executable name then
this field can be set to all zero.
Field 'psargs' - a null terminated string up to 80 characters in
length. Any additional space should be filled with zero. This
field contains the full executable path and any arguments passed
to the executable. If there's nothing sensible to write in this
field then fill it with zero.
Note NT_PRSTATUS is required, its data layout is:
struct prstatus32_t /* For RV32. */
{
uint8_t padding_1[12];
uint16_t sig;
uint8_t padding_2[10];
uint32_t thread_id;
uint8_t padding_3[44];
uint32_t x_regs[32];
uint8_t padding_4[4];
}
struct prstatus64_t /* For RV64. */
{
uint8_t padding_1[12];
uint16_t sig;
uint8_t padding_2[18];
uint32_t thread_id;
uint8_t padding_3[76];
uint64_t x_regs[32];
uint8_t padding_4[4];
}
Field 'sig' - the signal that stopped this thread. It's implementation
defined what this field actually means. Within GDB this will be
the signal number that the remote target reports as the stop
reason for this thread.
Field 'thread_is' - the thread id for this thread. It's implementation
defined what this field actually means. Within GDB this will be
thread thread-id that is assigned to each remote thread.
Field 'x_regs' - at index 0 we store the program counter, and at
indices 1 to 31 we store x-registers 1 to 31. x-register 0 is not
stored, its value is always zero anyway.
Note NT_FPREGSET is optional, its data layout is:
fpregset32_t /* For targets with 'F' extension. */
{
uint32_t f_regs[32];
uint32_t fcsr;
}
fpregset64_t /* For targets with 'D' extension . */
{
uint64_t f_regs[32];
uint32_t fcsr;
}
Field 'f_regs' - stores f-registers 0 to 31.
Field 'fcsr' - stores the fcsr CSR register, and is always 4-bytes.
The rules for ordering the notes is the same as for Linux. The
NT_PRSTATUS note must come before any other notes about additional
register sets. And for multi-threaded targets all registers for a
single thread should be grouped together. This is because only
NT_PRSTATUS includes a thread-id, all additional register notes after
a NT_PRSTATUS are assumed to belong to the same thread until a
different NT_PRSTATUS is seen.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add riscv-none-tdep.o.
(ALLDEPFILES): Add riscv-none-tdep.c.
* configure: Regenerate.
* configure.ac (CONFIG_OBS): Add elf-none-tdep.o when BFD has ELF
support.
* configure.tgt (riscv*-*-*): Include riscv-none-tdep.c.
* elf-none-tdep.c: New file.
* elf-none-tdep.h: New file.
* riscv-none-tdep.c: New file.
While reviewing the Linux and FreeBSD core dumping code within GDB for
another patch series, I noticed that the code that collects the
registers for each thread and writes these into ELF note format is
basically identical between Linux and FreeBSD.
This commit merges this code and moves it into a new file gcore-elf.c.
The function find_signalled_thread is moved from linux-tdep.c to
gcore.c despite not being shared. A later commit will make use of
this function.
I did merge, and then revert a previous version of this patch (commit
82a1fd3a49 for the original patch and 03642b7189 for the revert).
The problem with the original patch is that it introduced a
unconditional dependency between GDB and some ELF specific functions
in the BFD library, e.g. elfcore_write_prstatus and
elfcore_write_register_note. It was pointed out in this mailing list
post:
https://sourceware.org/pipermail/gdb-patches/2021-February/175750.html
that this change was breaking any build of GDB for non-ELF targets.
To confirm this breakage, and to test this new version of GDB I
configured and built for the target x86_64-apple-darwin20.3.0.
Where the previous version of this patch placed all of the common code
into gcore.c, which is included in all builds of GDB, this new patch
only places non-ELF specific generic code (i.e. find_signalled_thread)
into gcore.c, the ELF specific code is put into the new gcore-elf.c
file, which is only included in GDB if BFD has ELF support.
The contents of gcore-elf.c are referenced unconditionally from
linux-tdep.c and fbsd-tdep.c, this is fine, we previously always
assumed that these two targets required ELF support, and we continue
to make that assumption after this patch; nothing has changed there.
With my previous version of this patch the darwin target mentioned
above failed to build, but with the new version, the target builds
fine.
There are a couple of minor changes to the FreeBSD target after this
commit, but I believe that these are changes for the better:
(1) For FreeBSD we always used to record the thread-id in the core
file by using ptid_t.lwp (). In contrast the Linux code did this:
/* For remote targets the LWP may not be available, so use the TID. */
long lwp = ptid.lwp ();
if (lwp == 0)
lwp = ptid.tid ();
Both target now do this:
/* The LWP is often not available for bare metal target, in which case
use the tid instead. */
if (ptid.lwp_p ())
lwp = ptid.lwp ();
else
lwp = ptid.tid ();
Which is equivalent for Linux, but is a change for FreeBSD. I think
that all this means is that in some cases where GDB might have
previously recorded a thread-id of 0 for each thread, we might now get
something more useful.
(2) When collecting the registers for Linux we collected into a zero
initialised buffer. By contrast on FreeBSD the buffer is left
uninitialised. In the new code the buffer is always zero initialised.
I suspect once the registers are copied into the buffer there's
probably no gaps left so this makes no difference, but if it does then
using zeros rather than random bits of GDB's memory is probably a good
thing.
Otherwise, there should be no other user visible changes after this
commit.
Tested this on x86-64/GNU-Linux and x86-64/FreeBSD-12.2 with no
regressions.
gdb/ChangeLog:
* Makefile.in (SFILES): Add gcore-elf.c.
(HFILES_NO_SRCDIR): Add gcore-elf.h
* configure: Regenerate.
* configure.ac: Add gcore-elf.o to CONFIG_OBS if we have ELF
support.
* fbsd-tdep.c: Add 'gcore-elf.h' include.
(struct fbsd_collect_regset_section_cb_data): Delete.
(fbsd_collect_regset_section_cb): Delete.
(fbsd_collect_thread_registers): Delete.
(struct fbsd_corefile_thread_data): Delete.
(fbsd_corefile_thread): Delete.
(fbsd_make_corefile_notes): Call
gcore_elf_build_thread_register_notes instead of the now deleted
FreeBSD code.
* gcore-elf.c: New file, the content was moved here from
linux-tdep.c, functions were renamed and given minor cleanup.
* gcore-elf.h: New file.
* gcore.c (gcore_find_signalled_thread): Moved here from
linux-tdep.c and given a new name. Minor cleanups.
* gcore.h (gcore_find_signalled_thread): Declare.
* linux-tdep.c: Add 'gcore.h' and 'gcore-elf.h' includes.
(struct linux_collect_regset_section_cb_data): Delete.
(linux_collect_regset_section_cb): Delete.
(linux_collect_thread_registers): Delete.
(linux_corefile_thread): Call
gcore_elf_build_thread_register_notes.
(find_signalled_thread): Delete.
(linux_make_corefile_notes): Call gcore_find_signalled_thread.
Avoid the error message when source-highlight is actually available.
2020-12-19 Bernd Edlinger <bernd.edlinger@hotmail.de>
* configure.ac: Move the static libs vs. source-highlight
error message to a better place.
* configure: Regenerate.
I am getting
I'm sorry, Dave, I can't do that. Symbol format `elf64-littleriscv' unknown.
errors after updating from GDB 8.3 to 10. Bisecting showed that since
commit 1ff6de0312 ("bfd, ld: add CTF section linking"), bfd.h depends
on strncmp() being present, so configuring with
-Werror=implicit-function-declaration results in the check for ELF
support in BFD failing:
.../gdb/gdb/../bfd/elf-bfd.h: In function 'bfd_section_is_ctf':
.../gdb/gdb/../bfd/elf-bfd.h:3086:10: error: implicit declaration of function 'strncmp' [-Werror=implicit-function-declaration]
return strncmp (name, ".ctf", 4) == 0 && (name[4] == 0 || name[4] == '.');
gdb/ChangeLog:
* acincludde.m4 (GDB_AC_CHECK_BFD): Include string.h in the test
program.
Change-Id: Iec5e21d454c2a544c44d65e23cfde552c424c18e
This commit modifies gdb's configure script to trigger an error
if we cannot find a usable libgmp.
For the record, making this a requirement was discussed in March 2018:
https://sourceware.org/pipermail/gdb-patches/2018-March/147373.html
gdb/ChangeLog:
* configure.ac: Generate an error if a usable GMP library
could not be found.
* configure: Regenerate.
This patch allows a user to tell gdb's configure script where
his GMP library is installed.
gdb/ChangeLog:
* configure.ac: Add support for --with-libgmp-prefix.
* Makefile.in (LIBGMP): New variable.
(CLIBS): Include $(LIBGMP).
* configure, config.in: Regenerate
In python 3, itertools is a builtin module, so whether or not the
python you link against is a shared or a static one, importing it
works.
Change the import test to use ctypes which is a dynamic module in both
python 2 and 3.
gdb/ChangeLog:
PR python/26832
* configure: Regenerate.
* configure.ac: Check for python modules ctypes instead of
itertools.
... with AC_LINK_IFELSE + AC_LANG_PROGRAM.
All changes in the generated configure file are insignificant whitespace
changes.
gdb/ChangeLog:
* configure: Re-generate.
* sanitize.m4: Replace AC_TRY_LINK with AC_LINK_IFELSE +
AC_LANG_PROGRAM.
Change-Id: I6fc4c39e10b28d2ade964e0d59a7f8ec0d3a272a
For some reason, autoupdate isn't able to grok ptrace.m4:
$ autoupdate ptrace.m4
/usr/bin/m4:/tmp/auYjuodw/input.m4:171: ERROR: end of file in string
autoupdate: /usr/bin/m4 failed with exit status: 1
Honestly, I'm unable to grok it either. This patch re-indents it in a
way that I think is easier to read. With this patch applied, autoupdate
becomes able to parse ptrace.m4, but I chose to keep this re-indent in a
patch of its own.
All the changes in generated configure files consist of insignificant
whitespace changes.
gdb/ChangeLog:
* configure: Re-generate.
gdbserver/ChangeLog:
* configure: Re-generate.
gdbsupport/ChangeLog:
* configure: Re-generate.
* ptrace.m4: Re-indent.
Change-Id: Ie2afab09fecc8b6d0cccccb47ac9756f3843881e
Run autoupdate on configure.ac and adjust the indentation of the result
for better readability. This removes a bunch of warnings when running
`autoreconf -vf -Wall`. The changes are:
* Replace AC_INIT with AC_INIT and no arguments plus
AC_CONFIG_SRCDIR.
* Replace AC_ERROR with AC_MSG_ERROR.
* Replace AC_TRY_LINK with AC_LINK_IFELSE.
* Replace AC_TRY_COMPILE with AC_COMPILE_IFELSE.
* Replace AC_HELP_STRING with AS_HELP_STRING.
autoupdate erroneously tries to replace AC_C_LONG_DOUBLE in a comment,
which I reverted manually.
All the changes in the generated configure file are insignificant
whitespaces changes.
gdb/ChangeLog:
* configure.ac: Modernize.
* configure: Re-generate.
Change-Id: Ie3a1409c8032a36a6383da964286a46ece9b546e
`autoconf -Wall` notes that AM_PROG_CC_STDC is obsolete:
Fixes this autoconf warning:
configure.ac:40: warning: 'AM_PROG_CC_STDC': this macro is obsolete.
configure.ac:40: You should simply use the 'AC_PROG_CC' macro instead.
configure.ac:40: Also, your code should no longer depend upon 'am_cv_prog_cc_stdc',
configure.ac:40: but upon 'ac_cv_prog_cc_stdc'.
aclocal.m4:770: AM_PROG_CC_STDC is expanded from...
configure.ac:40: the top level
Since we build with a C++ compiler now, I don't think this is relevant.
If you look at the messages removed from gdbsupport/aclocal.m4, it says
that this functionality is now integrated in AC_PROG_CC, which we
already call. So it might not even make a difference.
We had a local version of AM_PROG_CC_STDC, in gdb/acinclude.m4 (only
used by gdb/configure.ac), remove it.
gdb/ChangeLog:
* acinclude.m4 (AM_PROG_CC_STDC): Remove.
* configure: Re-generate.
* configure.ac: Remove AM_PROG_CC_STDC.
gdbsupport/ChangeLog:
* aclocal.m4: Re-generate.
* configure: Re-generate.
* configure.ac: Remove AM_PROG_CC_STDC.
Change-Id: Ic824393598805d4f78cda9d119f8af46096e9c73
`autoreconf -Wall` notes that AC_CANONICAL_SYSTEM is obsolete:
configure.ac:36: warning: The macro `AC_CANONICAL_SYSTEM' is obsolete.
Replace it by AC_CANONICAL_BUILD, AC_CANONICAL_HOST and
AC_CANONICAL_TARGET in configure.ac files in gdb, gdbserver and
gdbsupport. All three macros may not be needed everywhere, but it is
hard to completely audit the configure files to see which are required,
so I think it's better (and that there's no downside) to just call all
three.
gdb/ChangeLog:
* configure.ac: Use AC_CANONICAL_{BUILD,HOST,TARGET} instead of
AC_CANONICAL_SYSTEM.
* configure: Re-generate.
gdbserver/ChangeLog:
* configure.ac: Use AC_CANONICAL_{BUILD,HOST,TARGET} instead of
AC_CANONICAL_SYSTEM.
* configure: Re-generate.
gdbsupport/ChangeLog:
* configure.ac: Use AC_CANONICAL_{BUILD,HOST,TARGET} instead of
AC_CANONICAL_SYSTEM.
* configure: Re-generate.
Change-Id: Ifd0e21f1e478634e768b5de1b8ee06a7f690d863
FreeBSD systems have provided these functions in libutil since 7.1
release. The most recent release without support is 6.4 released in
November of 2008.
This also requires libutil-freebsd on GNU/kFreeBSD systems. I assume
that those systems have supported kinfo_get_file and kinfo_get_vmmap
over a similar timeframe.
gdb/ChangeLog:
* configure.ac: Remove check for kinfo_getvmmap().
* configure, config.in: Regenerate.
* fbsd-nat.c (fbsd_read_mapping): Remove
(fbsd_nat_target::find_memory_regions): Remove the procfs version.
(fbsd_nat_target::info_proc): Assume kinfo_getfile() and
kinfo_get_vmmap() are always present.
gdbsupport/ChangeLog:
* common.m4 (GDB_AC_COMMON): Refactor checks for kinfo_getfile().
* configure, config.in: Regenerate.
GDB currently doesn't build on 32-bit Solaris:
* On Solaris 11.4/x86:
In file included from /usr/include/sys/procfs.h:26,
from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24:
/usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment"
#error "Cannot use procfs in the large file compilation environment"
^~~~~
* On Solaris 11.3/x86 there are several more instances of this.
The interaction between procfs and large-file support historically has
been a royal mess on Solaris:
* There are two versions of the procfs interface:
** The old ioctl-based /proc, deprecated and not used any longer in
either gdb or binutils.
** The `new' (introduced in Solaris 2.6, 1997) structured /proc.
* There are two headers one can possibly include:
** <procfs.h> which only provides the structured /proc, definining
_STRUCTURED_PROC=1 and then including ...
** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based
/proc, but provides structured /proc if _STRUCTURED_PROC == 1.
* procfs and the large-file environment didn't go well together:
** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit
compilations when the large-file environment was active
(_FILE_OFFSET_BITS == 64).
** In both Solaris 11.4 and Illumos, this restriction was lifted for
structured /proc.
So one has to be careful always to define _STRUCTURED_PROC=1 when
testing for or using <sys/procfs.h> on Solaris. As the errors above
show, this isn't always the case in binutils-gdb right now.
Also one may need to disable large-file support for 32-bit compilations
on Solaris. config/largefile.m4 meant to do this by wrapping the
AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding
ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because
it neglects the _STRUCTURED_PROC part.
To make things even worse, since GCC 9 g++ predefines
_FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to
enable large-file support, this has no effect, breaking the gdb build.
This patch addresses all this as follows:
* All tests for the <sys/procfs.h> header are made with
_STRUCTURED_PROC=1, the definition going into the various config.h
files instead of having to make them (and sometimes failing) in the
affected sources.
* To cope with the g++ predefine of _FILE_OFFSET_BITS=64,
-U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had
been far easier to have just
#undef _FILE_OFFSET_BITS
in config.h, but unfortunately such a construct in config.in is
commented by config.status irrespective of indentation and whitespace
if large-file support is disabled. I found no way around this and
putting the #undef in several global headers for bfd, binutils, ld,
and gdb seemed way more invasive.
* Last, the applicability check in largefile.m4 was modified only to
disable largefile support if really needed. To do so, it checks if
<sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it
doesn't, the disabling only happens if gdb exists in-tree and isn't
disabled, otherwise (building binutils from a tarball), there's no
conflict.
What initially confused me was the check for $plugins here, which
originally caused the disabling not to take place. Since AC_PLUGINGS
does enable plugin support if <dlfcn.h> exists (which it does on
Solaris), the disabling never happened.
I could find no explanation why the linker plugin needs large-file
support but thought it would be enough if gld and GCC's lto-plugin
agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not
enough: lto-plugin uses the simple-object interface from libiberty,
which includes off_t arguments. So to fully disable large-file
support would mean also disabling it in libiberty and its users: gcc
and libstdc++-v3. This seems highly undesirable, so I decided to
disable the linker plugin instead if large-file support won't work.
The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both
Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to
predefined _FILE_OFFSET_BITS=64). Also regtested on
amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4),
x86_64-pc-linux-gnu and i686-pc-linux-gnu.
config:
* largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>:
Check for <sys/procfs.h> incompatilibity with large-file support
on Solaris.
Only disable large-file support and perhaps plugins if needed.
Set, substitute LARGEFILE_CPPFLAGS if so.
bfd:
* bfd.m4 (BFD_SYS_PROCFS_H): New macro.
(BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H.
Don't define _STRUCTURED_PROC.
(BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise.
* elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define.
* configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>.
* configure, config.in: Regenerate.
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
binutils:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gas:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gdb:
* proc-api.c (_STRUCTURED_PROC): Don't define.
* proc-events.c: Likewise.
* proc-flags.c: Likewise.
* proc-why.c: Likewise.
* procfs.c: Likewise.
* Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* configure, config.in: Regenerate.
gdbserver:
* configure, config.in: Regenerate.
gdbsupport:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for
<sys/procfs.h>.
* Makefile.in: Regenerate.
* configure, config.in: Regenerate.
gnulib:
* configure.ac: Run ACX_LARGEFILE before gl_EARLY.
* configure: Regenerate.
gprof:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
ld:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
There is no need to check $pkg_cv_[]$1[]_LIBS works if package check
failed.
config/
PR binutils/26301
* pkg.m4 (PKG_CHECK_MODULES): Use AC_TRY_LINK only if
$pkg_failed = no.
binutils/
PR binutils/26301
* configure: Regenerated.
gdb/
PR binutils/26301
* configure: Regenerated.
It is quite normal to have headers without library on multilib OSes.
Add AC_TRY_LINK to PKG_CHECK_MODULES to check if $pkg_cv_[]$1[]_LIBS
works.
config/
PR binutils/26301
* pkg.m4 (PKG_CHECK_MODULES): Add AC_TRY_LINK to check if
$pkg_cv_[]$1[]_LIBS works.
binutils/
PR binutils/26301
* configure: Regenerated.
gdb/
PR binutils/26301
* configure: Regenerated.
I'm running into a build breaker:
...
src/gdb/ser-tcp.c:65:13: error: conflicting declaration ‘typedef int
socklen_t’
65 | typedef int socklen_t;
| ^~~~~~~~~
In file included from ../gnulib/import/unistd.h:40,
from
/home/vries/gdb_versions/devel/src/gdb/../gnulib/import/pathmax.h:42,
from
/home/vries/gdb_versions/devel/src/gdb/../gdbsupport/common-defs.h:120,
from src/gdb/defs.h:28,
from src/gdb/ser-tcp.c:20:
/usr/include/unistd.h:277:21: note: previous declaration as ‘typedef
__socklen_t socklen_t’
277 | typedef __socklen_t socklen_t;
| ^~~~~~~~~
...
after commit 05a6b8c28b "Don't unnecessarily redefine 'socklen_t' type in
MinGW builds".
The root cause is a typo in gdb/configure.ac, using sys/sockets.h where
sys/socket.h was meant:
...
AC_CHECK_HEADERS([sys/sockets.h])
...
Fix the typo.
Build and tested on x86_64-linux.
gdb/ChangeLog:
2020-07-27 Tom de Vries <tdevries@suse.de>
* configure.ac: Fix sys/sockets.h -> sys/socket.h typo.
* config.in: Regenerate.
* configure: Regenerate.
The original configure-time tests in gdb/ and gdbserver/ failed to
detect that 'socklen_t' is defined in MinGW headers because the test
program included only sys/socket.h, which is absent in MinGW system
headers. However on MS-Windows this data type is declared in another
header, ws2tcpip.h. The modified test programs try using ws2tcpip.h
if sys/socket.h is unavailable.
Thanks to Joel Brobecker who helped me regenerate the configure
scripts and the config.in files.
gdb/ChangeLog:
2020-07-26 Eli Zaretskii <eliz@gnu.org>
* configure.ac (AC_CHECK_HEADERS): Check for sys/socket.h and
ws2tcpip.h. When checking whether socklen_t type is defined, use
ws2tcpip.h if it is available and sys/socket.h isn't.
* configure: Regenerate.
* config.in: Regenerate.
gdbserver/ChangeLog:
2020-07-26 Eli Zaretskii <eliz@gnu.org>
* configure.ac (AC_CHECK_HEADERS): Add ws2tcpip.h.
When checking whether socklen_t type is defined, use ws2tcpip.h if
it is available and sys/socket.h isn't.
* configure: Regenerate.
* config.in: Regenerate.
This fixes test runs and compilation when --disable-libctf,
--disable-static, or --enable-shared are passed.
Changes since v2: Use GCC_ENABLE and fix indentation. Fix prototype
using 'void'. Use 'unsupported' and gdb_caching_proc.
Changes since v3: Adapt to upstream changes providing skip_ctf_tests.
Changes since v4: Adapt to upstream changes in the seven months (!)
since I last looked at this.
gdb/ChangeLog
* configure.ac: Add --enable-libctf: handle --disable-static
properly.
* acinclude.m4: sinclude ../config/enable.m4.
* Makefile.in (aclocal_m4_deps): Adjust accordingly.
(LIBCTF): Substitute in.
(CTF_DEPS): New, likewise.
(CLIBS): libctf needs symbols from libbfd: move earlier.
(CDEPS): Use CTF_DEPS, not LIBCTF, now LIBCTF can include rpath
flags.
* ctfread.c: Surround in ENABLE_LIBCTF.
(elfctf_build_psymtabs) [!ENABLE_LIBCTF]: New stub.
* configure: Regenerate.
* config.in: Likewise.
gdb/testsuite/ChangeLog
* configure.ac: Add --enable-libctf.
* aclocal.m4: sinclude ../config/enable.m4.
* Makefile.in (site.exp): Add enable_libctf to site.exp.
* lib/gdb.exp (skip_ctf_tests): Use it.
* gdb.base/ctf-constvars.exp: Error message tweak.
* gdb.base/ctf-ptype.exp: Likewise.
* configure: Regenerate.
I recently stumbled on this code mentioning Linux kernel 2.6.25, and
thought it could be time for some spring cleaning (newer GDBs probably
don't need to supports 12-year old kernels). I then found that the
"legacy" case is probably broken anyway, which gives an even better
motivation for its removal.
In short, this patch removes the configure checks that check if
user_regs_struct contains the fs_base/gs_base fields and adjusts all
uses of the HAVE_STRUCT_USER_REGS_STRUCT_{FS,GS}_BASE macros. The
longer explanation/rationale follows.
Apparently, Linux kernels since 2.6.25 (that's from 2008) have been
reliably providing fs_base and gs_base as part of user_regs_struct.
Commit df5d438e33d7 in the Linux kernel [1] seems related. This means
that we can get these values by reading registers with PTRACE_GETREGS.
Previously, these values were obtained using a separate
PTRACE_ARCH_PRCTL ptrace call.
First, I'm not even sure the configure check was really right in the
first place.
The user_regs_struct used by GDB comes from
/usr/include/x86_64-linux-gnu/sys/user.h (or equivalent on other
distros) and is provided by glibc. glibc has had the fs_base/gs_base
fields in there for a very long time, at least since this commit from
2001 [2]. The Linux kernel also has its version of user_regs_struct,
which I think was exported to user-space at some point. It included the
fs_base/gs_base fields since at least this 2002 commit [3]. In any
case, my conclusion is that the fields were there long before the
aforementioned Linux kernel commit. The kernel commit didn't add these
fields, it only made sure that they have reliable values when obtained
with PTRACE_GETREGS.
So, checking for the presence of the fs_base/gs_base fields in struct
user_regs_struct doesn't sound like a good way of knowing if we can
reliably get the fs_base/gs_base values from PTRACE_GETREGS. My guess
is that if we were using that strategy on a < 2.6.25 kernel, things
would not work correctly:
- configure would find that the user_regs_struct has the fs_base/gs_base
fields (which are probided by glibc anyway)
- we would be reading the fs_base/gs_base values using PTRACE_GETREGS,
for which the kernel would provide unreliable values
Second, I have tried to see how things worked by forcing GDB to not use
fs_base/gs_base from PTRACE_GETREGS (forcing it to use the "legacy"
code, by configuring with
ac_cv_member_struct_user_regs_struct_gs_base=no ac_cv_member_struct_user_regs_struct_fs_base=no
Doing so breaks writing registers back to the inferior. For example,
calling an inferior functions gives an internal error:
(gdb) p malloc(10)
/home/smarchi/src/binutils-gdb/gdb/i387-tdep.c:1408: internal-error: invalid i387 regnum 152
The relevant last frames where this error happens are:
#8 0x0000563123d262fc in internal_error (file=0x563123e93fd8 "/home/smarchi/src/binutils-gdb/gdb/i387-tdep.c", line=1408, fmt=0x563123e94482 "invalid i387 regnum %d") at /home/smarchi/src/binutils-gdb/gdbsupport/errors.cc:55
#9 0x0000563123047d0d in i387_collect_xsave (regcache=0x5631269453f0, regnum=152, xsave=0x7ffd38402a20, gcore=0) at /home/smarchi/src/binutils-gdb/gdb/i387-tdep.c:1408
#10 0x0000563122c69e8a in amd64_collect_xsave (regcache=0x5631269453f0, regnum=152, xsave=0x7ffd38402a20, gcore=0) at /home/smarchi/src/binutils-gdb/gdb/amd64-tdep.c:3448
#11 0x0000563122c5e94c in amd64_linux_nat_target::store_registers (this=0x56312515fd10 <the_amd64_linux_nat_target>, regcache=0x5631269453f0, regnum=152) at /home/smarchi/src/binutils-gdb/gdb/amd64-linux-nat.c:335
#12 0x00005631234c8c80 in target_store_registers (regcache=0x5631269453f0, regno=152) at /home/smarchi/src/binutils-gdb/gdb/target.c:3485
#13 0x00005631232e8df7 in regcache::raw_write (this=0x5631269453f0, regnum=152, buf=0x56312759e468 "@\225\372\367\377\177") at /home/smarchi/src/binutils-gdb/gdb/regcache.c:765
#14 0x00005631232e8f0c in regcache::cooked_write (this=0x5631269453f0, regnum=152, buf=0x56312759e468 "@\225\372\367\377\177") at /home/smarchi/src/binutils-gdb/gdb/regcache.c:778
#15 0x00005631232e75ec in regcache::restore (this=0x5631269453f0, src=0x5631275eb130) at /home/smarchi/src/binutils-gdb/gdb/regcache.c:283
#16 0x0000563123083fc4 in infcall_suspend_state::restore (this=0x5631273ed930, gdbarch=0x56312718cf20, tp=0x5631270bca90, regcache=0x5631269453f0) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:9103
#17 0x0000563123081eed in restore_infcall_suspend_state (inf_state=0x5631273ed930) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:9151
The problem seems to be that amd64_linux_nat_target::store_registers
calls amd64_native_gregset_supplies_p to know whether gregset provides
fs_base. When !HAVE_STRUCT_USER_REGS_STRUCT_FS_BASE,
amd64_native_gregset_supplies_p returns false. store_registers
therefore assumes that it must be an "xstate" register. This is of
course wrong, and that leads to the failed assertion when
i387_collect_xsave doesn't recognize the register.
amd64_linux_nat_target::store_registers could probably be fixed to
handle this case, but I don't think it's worth it, given that it would
only be to support very old kernels.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5d438e33d7fc914ba9b6e0d6b019a8966c5fcc
[2] https://sourceware.org/git/?p=glibc.git;a=commit;h=c9cf6ddeebb7bb
[3] https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=88e4bc32686ebd0b1111a94f93eba2d334241f68
gdb/ChangeLog:
* configure.ac: Remove check for fs_base/gs_base in
user_regs_struct.
* configure: Re-generate.
* config.in: Re-generate.
* amd64-nat.c (amd64_native_gregset_reg_offset): Adjust.
* amd64-linux-nat.c (amd64_linux_nat_target::fetch_registers,
amd64_linux_nat_target::store_registers, ps_get_thread_area, ): Adjust.
gdbserver/ChangeLog:
* configure.ac: Remove check for fs_base/gs_base in
user_regs_struct.
* configure: Re-generate.
* config.in: Re-generate.
* linux-x86-low.cc (x86_64_regmap, x86_fill_gregset,
x86_store_gregset): Adjust.
gdb_select.h and the event loop require some configure checks, so this
moves the needed checks to common.m4 and updates the configure
scripts.
gdb/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Remove checks that are now in GDB_AC_COMMON.
gdbserver/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* config.in: Rebuild.
gdbsupport/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* config.in, configure: Rebuild.
* common.m4 (GDB_AC_COMMON): Check for poll.h, sys/poll.h,
sys/select.h, and poll.
I stumbled on this snippet in nat/gdb_ptrace.h:
/* Some systems, in particular DEC OSF/1, Digital Unix, Compaq Tru64
or whatever it's called these days, don't provide a prototype for
ptrace. Provide one to silence compiler warnings. */
#ifndef HAVE_DECL_PTRACE
extern PTRACE_TYPE_RET ptrace();
#endif
I believe this is unnecessary today and should be removed. First, the
comment only mentions OSes we don't support (and to be honest, I had
never even heard of).
But most importantly, in C++, a declaration with empty parenthesis
declares a function that accepts no arguments, unlike in C. So if this
declaration was really used, GDB wouldn't build, since all ptrace call
sites pass some arguments. Since we haven't heard anything about this
causing some build failures since we have transitioned to C++, I
conclude that it's not used.
This patch removes it as well as the corresponding configure check.
gdb/ChangeLog:
* ptrace.m4: Don't check for ptrace declaration.
* config.in: Re-generate.
* configure: Re-generate.
* nat/gdb_ptrace.h: Don't declare ptrace if HAVE_DECL_PTRACE is
not defined.
gdbserver/ChangeLog:
* config.in: Re-generate.
* configure: Re-generate.
gdbsupport/ChangeLog:
* config.in: Re-generate.
* configure: Re-generate.
While working on the preceding selftests patches, I noticed that some
selftests-specific files are included in the build even when selftests
are disabled, namely disasm-selftest.c and gdbarch-selftests.c. These
files are entirely #if'ed out when building with selftests disabled.
This is not a huge problem, but I think it would make more sense if
these files were simply not built.
With this patch, I propose to put all the selftests-specific source
files into a SELFTESTS_SRCS Makefile variable (even selftest-arch.c,
which is currently added by the configure script).
gdb/ChangeLog:
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Rename to...
(SELFTESTS_SRCS): ... this. Add disasm-selftests.c,
gdbarch-selfselftests.c and selftest-arch.c.
(SUBDIR_UNITTESTS_OBS): Rename to...
(SELFTESTS_OBS): ... this.
(COMMON_SFILES): Remove disasm-selftests.c and
gdbarch-selftests.c.
* configure.ac: Don't add selftest-arch.{c,o} to
CONFIG_{SRCS,OBS}.
* disasm-selftests.c, gdbarch-selftests.c: Remove GDB_SELF_TEST
preprocessor conditions.
The same is done for gdb, gdbserver and gdbsupport. I therefore think
it makes sense to move that to GDB_AC_COMMON.
It is required to move the call to GDB_AC_COMMON so it is before
GDB_AC_SELFTEST in gdbserver/configure.ac, otherwise the $development
variable isn't set when the code behind GDB_AC_SELFTEST executes.
gdb/ChangeLog:
* configure.ac: Don't source bfd/development.sh.
* selftest.m4: Modify comment.
* configure: Re-generate.
gdbserver/ChangeLog:
* configure.ac: Don't source bfd/development.sh, move
GDB_AC_COMMON higher.
* configure: Re-generate.
gdbsupport/ChangeLog:
* configure.ac: Don't source bfd/development.sh.
* common.m4: Source bfd/development.sh.
* configure: Re-generate.
Before commit 3d1e5a43cb ("gdbsupport/configure.ac: source
development.sh"), the GDB build in non-development mode (turn
development to false in bfd/development.sh if you want to try) was
broken because the gdbsupport configure script didn't source
bfd/development.sh to set the development variable.
Since the GDB_AC_SELFTEST macro relies on the `development` variable, I
propose to modify it such that it errors out if $development does not
have an expected value of "true" or "false". This could prevent a
future similar problem from happening while refactoring the configure
scripts. It would have caught the problem fixed by the patch mentioned
earlier.
gdb/ChangeLog:
* selftest.m4 (GDB_AC_SELFTEST): Error out if $development is
not "true" or "false".
* configure: Re-generate.
gdbserver/ChangeLog:
* configure: Re-generate.
gdbsupport/ChangeLog:
* configure: Re-generate.
While compiling with clang, I noticed it didn't catch cases where my
function declaration didn't match my function definition. This is
normally caught by gcc with -Wmissing-declarations.
On clang, this is caught by -Wmissing-prototypes instead.
Note that on gcc, -Wmissing-prototypes also exists, but is only valid
for C and Objective-C. It gets correctly rejected by the configure
script since gcc rejects it with:
cc1plus: error: command line option '-Wmissing-prototypes' is valid for C/ObjC but not for C++ -Werror
So this warning flag ends up not used for gcc (which is what we want).
gdb/ChangeLog:
* configure: Re-generate.
gdbserver/ChangeLog:
* configure: Re-generate.
gdbsupport/ChangeLog:
* configure: Re-generate.
* warning.m4: Enable -Wmissing-prototypes.
debuginfod is a lightweight web service that indexes ELF/DWARF debugging
resources by build-id and serves them over HTTP.
This patch enables GDB to query debuginfod servers for separate debug
files and source code when it is otherwise not able to find them.
GDB can be built with debuginfod using the --with-debuginfod configure
option.
This requires that libdebuginfod be installed and found at configure time.
debuginfod is packaged with elfutils, starting with version 0.178.
For more information see https://sourceware.org/elfutils/.
Tested on x86_64 Fedora 31.
gdb/ChangeLog:
2020-02-26 Aaron Merey <amerey@redhat.com>
* Makefile.in: Handle optional debuginfod support.
* NEWS: Update.
* README: Add --with-debuginfod summary.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle optional debuginfod support.
* debuginfod-support.c: debuginfod helper functions.
* debuginfod-support.h: Ditto.
* doc/gdb.texinfo: Add --with-debuginfod to configure options
summary.
* dwarf2/read.c (dwarf2_get_dwz_file): Query debuginfod servers
when a dwz file cannot be found.
* elfread.c (elf_symfile_read): Query debuginfod servers when a
debuginfo file cannot be found.
* source.c (open_source_file): Query debuginfod servers when a
source file cannot be found.
* top.c (print_gdb_configuration): Include
--{with,without}-debuginfod in the output.
gdb/testsuite/ChangeLog:
2020-02-26 Aaron Merey <amerey@redhat.com>
* gdb.debuginfod: New directory for debuginfod tests.
* gdb.debuginfod/main.c: New test file.
* gdb.debuginfod/fetch_src_and_symbols.exp: New tests.
The motivation behind this commit is to make it easier to bundle the
Python *.py library files with GDB when statically linking GDB against
libpython. The Python files will be manually added into the GDB
installation tree, and GDB should be able to find them at run-time.
The installation tree will look like this:
.
|-- bin/
|-- include/
|-- lib/
| `-- python3.8/
`-- share/
The benefit here is that the entire installation tree can be bundled
into a single archive and copied to another machine with a different
version of Python installed, and GDB will still work, including its
Python support.
In use the new configure options would be used something like this,
first build and install a static Python library:
mkdir python
cd python
# Clone or download Python into a src/ directory.
mkdir build
export PYTHON_INSTALL_PATH=$PWD/install
cd build
../src/configure --disable-shared --prefix=$PYTHON_INSTALL_PATH
make
make install
Now build and install GDB:
mkdir binutils-gdb
cd binutils-gdb
# Clone or download GDB into a src/ directory.
mkdir build
export GDB_INSTALL_DIR=$PWD/install
cd build
../src/configure \
--prefix=$GDB_INSTALL_DIR \
--with-python=$PYTHON_INSTALL_PATH/bin/python3 \
--with-python-libdir=$GDB_INSTALL_DIR/lib
make all-gdb
make install-gdb
Finally, copy the Python libraries into the GDB install:
cp -r $PYTHON_INSTALL_DIR/lib/python3.8/ $GDB_INSTALL_DIR/lib
After this the Python src, build, and install directories are no
longer needed and can be deleted.
If the new --with-python-libdir option is not used then the existing
behaviour is left unchanged, GDB will look for the Python libraries in
the lib/ directory within the python path. The concatenation of the
python prefix and the string 'lib/' is now done at configure time,
rather than at run time in GDB as it was previous, however, this was
never something that the user had dynamic control over, so there's no
loss of functionality.
gdb/ChangeLog:
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Add --with-python-libdir option.
* main.c: Use WITH_PYTHON_LIBDIR.
GCC's config/ChangeLog since the last time this merge was done
(in the binutils-gdb commit 0b4d000cc4) is included at the
end of this commit message.
It is worth noting that the binutils-gdb commit 301a9420d9
added the file config/debuginfod.m4 which is not present in GCC's
config/ directory. This file is preserved, unmodified, after this
commit.
In order to regenerate all of the configure files, I configured with
--enable-maintainer-mode, and built the 'all' target. I then did the
same thing on a source tree without this patch, and only committed
those files that changed when this patch was added.
GCC's config/ChangeLog entries:
2020-02-12 Sandra Loosemore <sandra@codesourcery.com>
PR libstdc++/79193
PR libstdc++/88999
* no-executables.m4: Use a non-empty program to test for linker
support.
2020-02-01 Andrew Burgess <andrew.burgess@embecosm.com>
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Update shell syntax.
2020-01-27 Andrew Burgess <andrew.burgess@embecosm.com>
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Add new
--with-libXXX-type=... option. Use this to guide the selection of
either a shared library or a static library.
2020-01-24 Maciej W. Rozycki <macro@wdc.com>
* toolexeclibdir.m4: New file.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
2019-09-06 Florian Weimer <fweimer@redhat.com>
* futex.m4 (GCC_LINUX_FUTEX): Include <unistd.h> for the syscall
function.
2019-07-08 Richard Sandiford <richard.sandiford@arm.com>
* bootstrap-Og.mk: New file.
2019-06-25 Kwok Cheung Yeung <kcy@codesourcery.com>
Andrew Stubbs <ams@codesourcery.com>
* gthr.m4 (GCC_AC_THREAD_HEADER): Add case for gcn.
2019-05-30 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* ax_count_cpus.m4: New file.
2019-05-02 Richard Biener <rguenther@suse.de>
PR bootstrap/85574
* bootstrap-lto.mk (extra-compare): Set to gcc/lto1$(exeext).
2019-04-16 Martin Liska <mliska@suse.cz>
* bootstrap-lto-lean.mk: Filter out -flto in STAGEtrain_CFLAGS.
2019-04-09 Martin Liska <mliska@suse.cz>
* bootstrap-lto-lean.mk: New file.
2019-03-02 Johannes Pfau <johannespfau@gmail.com>
* mh-mingw: Also set __USE_MINGW_ACCESS flag for C++ code.
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
config/ChangeLog:
* ax_count_cpus.m4: New file, backported from GCC.
* bootstrap-Og.mk: New file, backported from GCC.
* bootstrap-lto-lean.mk: New file, backported from GCC.
* bootstrap-lto.mk: Changes backported from GCC.
* futex.m4: Changes backported from GCC.
* gthr.m4: Changes backported from GCC.
* lib-link.m4: Changes backported from GCC.
* mh-mingw: Changes backported from GCC.
* no-executables.m4: Changes backported from GCC.
* tls.m4: Changes backported from GCC.
* toolexeclibdir.m4: New file, backported from GCC.
binutils/ChangeLog:
* configure: Regenerate.
gdb/ChangeLog:
* configure: Regenerate.
gdbserver/ChangeLog:
* configure: Regenerate.
gdbsupport/ChangeLog:
* configure: Regenerate.
intl/ChangeLog:
* configure: Regenerate.
libiberty/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog.bin-gdb:
* configure: Regenerate.
In my previous commit, I did a last minute modification of warning.m4,
but forgot to re-generate the configure scripts, this commit fixes that.
gdb/ChangeLog:
* configure: Re-generate.
gdbserver/ChangeLog:
* configure: Re-generate.
gdbsupport/ChangeLog:
* configure: Re-generate.
Commit 85f0dd3ce ("[gdb] Fix -Wstrict-null-sentinel warnings") fixed
some violations of -Wstrict-null-sentinel. If we want to enforce this
warning, I think we should enable it in our warning.m4 file.
gdbsupport/ChangeLog:
* warning.m4: Add -Wstrict-null-sentinel.
* configure: Re-generate.
gdbserver/ChangeLog:
* configure: Re-generate.
gdb/ChangeLog:
* configure: Re-generate.
This patch moves gdbserver to the top level.
This patch is as close to a pure move as possible -- gdbserver still
builds its own variant of gnulib and gdbsupport. Changing this will
be done in a separate patch.
[v2] Note that, per Simon's review comment, this patch changes the
tree so that gdbserver is not built for or1k or score. This makes
sense, because there is apparently not actually a gdbserver port here.
[v3] This version of the patch also splits out some configury into a
new file, gdbserver/configure.host, so that the top-level configure
script can simply rely on it in order to decide whether gdbserver
should be built.
[v4] This version adds documentation and removes some unnecessary
top-level dependencies.
[v5] Update docs to mention "make all-gdbserver" and change how
top-level configure decides whether to build gdbserver, switching to a
single, shared script.
Tested by the buildbot.
ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver.
* gdbserver: New directory, moved from gdb/gdbserver.
* configure.ac (host_tools): Add gdbserver.
Only build gdbserver on certain systems.
* Makefile.in, configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gdbserver.
* MAINTAINERS: Add gdbserver.
gdb/ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
* README: Update gdbserver documentation.
* gdbserver: Move to top level.
* configure.tgt (build_gdbserver): Remove.
* configure.ac: Remove --enable-gdbserver.
* configure: Rebuild.
* Makefile.in (distclean): Don't mention gdbserver.
Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e
This moves many needed configure checks from gdb and gdbserver into
common.m4. This helps gdbsupport, nat, and target be self-contained.
The result is a bit spaghetti-ish, because gdbsupport uses another m4
file from gdb/. The resulting code is somewhat non-obvious. However,
these problems already exist, so it's not really that much worse than
what is already done.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Move many checks to ../gdbsupport/common.m4.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Remove any checks that were added to common.m4.
* acinclude.m4: Include lib-ld.m4, lib-prefix.m4, and
lib-link.m4.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure, Makefile.in, aclocal.m4, common.m4, config.in:
Rebuild.
* common.m4 (GDB_AC_COMMON): Move many checks from
gdb/configure.ac.
* acinclude.m4: Include bfd.m4, ptrace.m4.
Change-Id: I931eaa94065df268b30a2f1354390710df89c7f8
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
I noticed that USE_WIN32API is defined separately by gdbserver and
gdb. However, because it is used by code in gdbsupport, it should be
defined by common.m4. This approach ensures that the code will
continue to work when it is moved to the top level.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* gdbsupport/common.m4 (GDB_AC_COMMON): Define WIN32APILIBS and
USE_WIN32API when needed.
* configure.ac (USE_WIN32API): Don't define.
(WIN32LIBS): Use WIN32APILIBS.
* configure: Rebuild.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure.ac (LIBS): Use WIN32APILIBS.
(USE_WIN32API): Don't define.
* configure: Rebuild.
Change-Id: I40d524d5445ebfb452b36f4d0e102f0b1e1089df
Simon pointed out that the indentation in common.m4 is off. This
patch fixes the problem.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* gdbsupport/common.m4 (GDB_AC_COMMON): Fix indentation.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
Change-Id: I6a629bd5873cca95ba3e17656f0d0ce583a08361
Now that most warnings of this kind are fixed, we can enable
-Wmissing-declarations. I say "most", because it is likely that there
are some more in some configurations I am not able to build, but they
should be pretty easy to fix.
gdb/ChangeLog:
* warning.m4: Add -Wmissing-declarations to build_warnings.
* configure: Re-generate.
gdb/gdbserver/ChangeLog:
* configure: Re-generate.
Change-Id: Iae9b59f22eb5dd1965d09f34c5c9e212cddf67ba
This ensures that empty variables and variables with spaces are handled
correctly.
Code was inconsistent on whether the constant string (e.g. yes/no)
should also be quoted; I tried to be consistent with surrounding code.
This fixes the error Eli reported during configure with mingw (though that
was not fatal).
gdb/ChangeLog:
2019-12-19 Christian Biesinger <cbiesinger@google.com>
* configure: Regenerate.
* configure.ac: Quote variable arguments of test.
* gdbsupport/common.m4: Likewise.
gdb/gdbserver/ChangeLog:
2019-12-19 Christian Biesinger <cbiesinger@google.com>
* configure: Regenerate.
* configure.ac: Quote variable arguments of test.
Change-Id: I220e78b52c7db88b9dd058eda604635b03464fac
To do that, this patch makes IPA compile safe-strerror as well. Because
it doesn't use Gnulib, it calls the Glibc version of strerror_r directly.
Consequently this patch also removes the configure checks for strerror.
gdb/ChangeLog:
2019-12-10 Christian Biesinger <cbiesinger@google.com>
* config.in: Regenerate.
* configure: Regenerate.
* gdbsupport/agent.c (gdb_connect_sync_socket): Call
safe_strerror instead of strerror.
* gdbsupport/common.m4: Don't check for strerror.
* gdbsupport/safe-strerror.c: Support both the glibc version
of strerror_r and the XSI version.
gdb/gdbserver/ChangeLog:
2019-12-10 Christian Biesinger <cbiesinger@google.com>
* Makefile.in: Add safe-strerror.c to gdbreplay and IPA, and change
UNDO_GNULIB_CFLAGS to undo strerror_r instead of strerror.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Don't check for strerror.
* linux-i386-ipa.c (initialize_fast_tracepoint_trampoline_buffer):
Call safe_strerror instead of strerror.
* server.h (strerror): Remove this now-unnecessary declaration.
* tracepoint.c (init_named_socket): Call safe_strerror instead of
strerror.
(gdb_agent_helper_thread): Likewise.
* utils.c (perror_with_name): Likewise.
Change-Id: I74848f072dcde75cb55c435ef9398dc8f958cd73
This adds some configury so that gdb can set the names of worker
threads. This makes them show up more nicely when debugging gdb
itself.
2019-11-26 Tom Tromey <tom@tromey.com>
* gdbsupport/thread-pool.c (thread_pool::set_thread_count): Set
name of worker thread.
* gdbsupport/common.m4 (GDB_AC_COMMON): Check for
pthread_setname_np.
* configure, config.in: Rebuild.
gdb/gdbserver/ChangeLog
2019-11-26 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
Change-Id: I60473d65ae9ae14d8c56ddde39684240c16aaf35
This adds configury support and an RAII class that can be used to
temporarily block signals that are used by gdb. (This class is not
used in this patch, but it split out for easier review.)
The idea of this patch is that these signals should only be delivered
to the main thread. So, when creating a background thread, they are
temporarily blocked; the blocked state is inherited by the new thread.
The sigprocmask man page says:
The use of sigprocmask() is unspecified in a multithreaded
process; see pthread_sigmask(3).
This patch changes gdb to use pthread_sigmask when appropriate, by
introducing a convenience define.
I've updated gdbserver as well, because I had to touch gdbsupport, and
because the threading patches will make it link against the thread
library.
I chose not to touch the NTO code, because I don't know anything about
that platform and because I cannot test it.
Finally, this modifies an existing spot in the Guile layer to use the
new facility.
gdb/ChangeLog
2019-11-26 Tom Tromey <tom@tromey.com>
* gdbsupport/signals-state-save-restore.c (original_signal_mask):
Remove comment.
(save_original_signals_state, restore_original_signals_state): Use
gdb_sigmask.
* linux-nat.c (block_child_signals, restore_child_signals_mask)
(_initialize_linux_nat): Use gdb_sigmask.
* guile/guile.c (_initialize_guile): Use block_signals.
* Makefile.in (HFILES_NO_SRCDIR): Add gdb-sigmask.h.
* gdbsupport/gdb-sigmask.h: New file.
* event-top.c (async_sigtstp_handler): Use gdb_sigmask.
* cp-support.c (gdb_demangle): Use gdb_sigmask.
* gdbsupport/common.m4 (GDB_AC_COMMON): Check for
pthread_sigmask.
* configure, config.in: Rebuild.
* gdbsupport/block-signals.h: New file.
gdb/gdbserver/ChangeLog
2019-11-26 Tom Tromey <tom@tromey.com>
* remote-utils.c (block_unblock_async_io): Use gdb_sigmask.
* linux-low.c (linux_wait_for_event_filtered, linux_async): Use
gdb_sigmask.
* configure, config.in: Rebuild.
Change-Id: If3f37dc57dd859c226e9e4d79458a0514746e8c6
This adds a configure check for std::thread. This is needed because
std::thread is not available on some systems, like some versions of
mingw and DJGPP.
This also adds configury to make sure that a threaded gdb links
against the correct threading library (-lpthread or the like), and
passes the right flags (e.g., -pthread) to the compilations.
Note that this also links gdbserver against the thread library. This
is not strictly necessary at this point in the series, but a later
patch will change gdbsupport to use pthread_sigmask, at which point
this will be needed.
gdb/ChangeLog
2019-11-26 Tom Tromey <tom@tromey.com>
* acinclude.m4: Include ax_pthread.m4.
* Makefile.in (PTHREAD_CFLAGS, PTHREAD_LIBS): New variables.
(INTERNAL_CFLAGS_BASE): Use PTHREAD_CFLAGS.
(CLIBS): Use PTHREAD_LIBS.
(aclocal_m4_deps): Add ax_pthread.m4.
* config.in, configure: Rebuild.
* gdbsupport/common.m4 (GDB_AC_COMMON): Check for std::thread.
gdb/gdbserver/ChangeLog
2019-11-26 Tom Tromey <tom@tromey.com>
* Makefile.in (PTHREAD_CFLAGS, PTHREAD_LIBS): New variables.
(INTERNAL_CFLAGS_BASE): Use PTHREAD_CFLAGS.
(GDBSERVER_LIBS): Use PTHREAD_LIBS.
* acinclude.m4: Include ax_pthread.m4.
* config.in, configure: Rebuild.
Change-Id: I00ec55db6077f2615421a93461fc3be57e916aa0
