A double-free happens when using a JIT debug info reader that creates
more than one block. In the loop that frees blocks in finalize_symtab,
at the very end, the gdb_block_iter_tmp variable is set initially, but
not changed as the loop advances. If we have two blocks, the first
iteration frees the first block, the second iteration frees the second
block, but the third iteration tries to free the second block again, as
gdb_block_iter_tmp keeps pointing on the second block.
Fix it by assigning the gdb_block_iter_tmp variable in the loop.
I have improved the jit-reader.exp test to cover this case, by adding a
second "JIT-ed" function and creating a block for it. I have renamed
the existing function to something I find a bit more descriptive. There
are no significant changes to jit-reader.exp itself, only updates
following the renaming. The important changes are in jithost.c
(generate a new function) and in jitreader.c (create a gdb_block for
that function).
This was found because of an ASan report:
$ ./gdb testsuite/outputs/gdb.base/jit-reader/jit-reader -ex "jit-reader-load /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/jit-reader/jitreader.so" -ex r
Reading symbols from testsuite/outputs/gdb.base/jit-reader/jit-reader...
Starting program: /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/jit-reader/jit-reader
=================================================================
==1751048==ERROR: AddressSanitizer: heap-use-after-free on address 0x604000042eb8 at pc 0x5650ef8eec88 bp 0x7ffe52767290 sp 0x7ffe52767280
READ of size 8 at 0x604000042eb8 thread T0
#0 0x5650ef8eec87 in finalize_symtab /home/simark/src/binutils-gdb/gdb/jit.c:768
#1 0x5650ef8eef88 in jit_object_close_impl /home/simark/src/binutils-gdb/gdb/jit.c:797
#2 0x7fbbda986278 in read_debug_info /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jitreader.c:71
#3 0x5650ef8ef56b in jit_reader_try_read_symtab /home/simark/src/binutils-gdb/gdb/jit.c:850
#4 0x5650ef8effe3 in jit_register_code /home/simark/src/binutils-gdb/gdb/jit.c:948
#5 0x5650ef8f2c92 in jit_event_handler(gdbarch*) /home/simark/src/binutils-gdb/gdb/jit.c:1396
#6 0x5650ef0d137e in handle_jit_event /home/simark/src/binutils-gdb/gdb/breakpoint.c:5470
[snip]
0x604000042eb8 is located 40 bytes inside of 48-byte region [0x604000042e90,0x604000042ec0)
freed by thread T0 here:
#0 0x7fbbe57376b0 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:122
#1 0x5650ef8f350b in xfree<gdb_block> /home/simark/src/binutils-gdb/gdb/gdbsupport/common-utils.h:62
#2 0x5650ef8eeca9 in finalize_symtab /home/simark/src/binutils-gdb/gdb/jit.c:769
#3 0x5650ef8eef88 in jit_object_close_impl /home/simark/src/binutils-gdb/gdb/jit.c:797
#4 0x7fbbda986278 in read_debug_info /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jitreader.c:71
#5 0x5650ef8ef56b in jit_reader_try_read_symtab /home/simark/src/binutils-gdb/gdb/jit.c:850
#6 0x5650ef8effe3 in jit_register_code /home/simark/src/binutils-gdb/gdb/jit.c:948
#7 0x5650ef8f2c92 in jit_event_handler(gdbarch*) /home/simark/src/binutils-gdb/gdb/jit.c:1396
#8 0x5650ef0d137e in handle_jit_event /home/simark/src/binutils-gdb/gdb/breakpoint.c:5470
[snip]
previously allocated by thread T0 here:
#0 0x7fbbe5737cd8 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:153
#1 0x5650eef662f3 in xcalloc /home/simark/src/binutils-gdb/gdb/alloc.c:100
#2 0x5650ef8f34ea in xcnew<gdb_block> /home/simark/src/binutils-gdb/gdb/gdbsupport/poison.h:122
#3 0x5650ef8ed467 in jit_block_open_impl /home/simark/src/binutils-gdb/gdb/jit.c:557
#4 0x7fbbda98620a in read_debug_info /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jitreader.c:60
#5 0x5650ef8ef56b in jit_reader_try_read_symtab /home/simark/src/binutils-gdb/gdb/jit.c:850
#6 0x5650ef8effe3 in jit_register_code /home/simark/src/binutils-gdb/gdb/jit.c:948
#7 0x5650ef8f2c92 in jit_event_handler(gdbarch*) /home/simark/src/binutils-gdb/gdb/jit.c:1396
#8 0x5650ef0d137e in handle_jit_event /home/simark/src/binutils-gdb/gdb/breakpoint.c:5470
[snip]
gdb/ChangeLog:
* jit.c (finalize_symtab): Set gdb_block_iter_tmp in loop.
gdb/testsuite/ChangeLog:
* gdb.base/jit-reader.exp (jit_reader_test): Rename
jit_function_00 to jit_function_stack_mangle.
* gdb.base/jithost.c (jit_function_t): Rename to...
(jit_function_stack_mangle_t): ... this.
(jit_function_add_t): New typedef.
(jit_function_00_code): Rename to...
(jit_function_stack_mangle_code): ... this, make static.
(jit_function_add_code): New.
(main): Generate "add" function and call it. Adjust to changes
in jithost_abi.
* gdb.base/jithost.h (struct jithost_abi_bounds): New.
(struct jithost_abi) <begin, end>: Remove fields.
<object, function_stack_mangle, function_add>: New fields.
* gdb.base/jitreader.c (struct reader_state) <code_begin,
code_end>: Remove fields.
<func_stack_mangle>: New field.
(read_debug_info): Adjust to renaming, create block for "add"
function.
(read_sp, unwind_frame, get_frame_id): Adjust to other changes.
I noticed that get_exec_file could return a "const char *". This
patch implements this change.
I couldn't build all the code -- but I did build Linux native and a
mingw cross.
Consequently, the NTO code has a hack, where it casts away const. I
think this can be removed, but that required more work there, and
since I couldn't compile it, I felt it best not to try.
Let me know what you think.
gdb/ChangeLog
2019-12-16 Tom Tromey <tromey@adacore.com>
* windows-nat.c (windows_nat_target::attach): Update.
* remote.c (extended_remote_target::attach): Update.
* procfs.c (procfs_target::attach): Update.
* nto-procfs.c (nto_procfs_target::attach): Update.
(nto_procfs_target::create_inferior): Update.
* inf-ptrace.c (inf_ptrace_target::attach): Update.
* gnu-nat.c (gnu_nat_target::attach): Update.
(gnu_nat_target::detach): Update.
* darwin-nat.c (darwin_nat_target::attach): Update.
* corefile.c (get_exec_file): Constify result. Remove extraneous
return.
* bsd-kvm.c (bsd_kvm_target_open): Update.
* gdbsupport/common-inferior.h (get_exec_file): Constify result.
gdb/gdbserver/ChangeLog
2019-12-16 Tom Tromey <tromey@adacore.com>
* server.c (get_exec_file): Constify result.
Change-Id: I29c60f7313a7def0dcb290ff0c2a4c1dea4f981f
I'm flying blind here, not having an s+core s3 insn set reference,
but this seems reasonably obvious from what is done by the assembler.
s3_do16_rpop does some mixing of imm and reg values to place in the
rpop reg field, but I'm not going to try to fix the disassembly
there.
* score-dis.c (print_insn_score16): Move rpush/rpop imm field
value adjustment so that it doesn't affect reg field too.
The ubsan complaint is fixed by the SBM change, with similar possible
complaints fixed by the EXTRACT change. The rest is just cleanup.
include/
* opcode/crx.h (inst <match>): Make unsigned int.
opcodes/
* crx-dis.c (EXTRACT, SBM): Avoid signed overflow.
(get_number_of_operands, getargtype, getbits, getregname),
(getcopregname, getprocregname, gettrapstring, getcinvstring),
(getregliststring, get_word_at_PC, get_words_at_PC, build_mask),
(powerof2, match_opcode, make_instruction, print_arguments),
(print_arg): Delete forward declarations, moving static to..
(getregname, getcopregname, getregliststring): ..these definitions.
(build_mask): Return unsigned int mask.
(match_opcode): Use unsigned int vars.
Note that using 1u in N32_BIT makes all of N32_BIT, __MASK, __MF, __GF
and __SEXT evaluate as unsigned int (the latter three when when their
v arg is int or smaller). This would be a problem if assigning the
result to a bfd_vma, long, or other type wider than an int since the
__SEXT result would be zero extended to the wider type. Fortunately
nds32 target code doesn't use wider types unnecessarily.
include/
* opcode/nds32.h (N32_BIT): Define using 1u.
(__SEXT): Use __MASK and N32_BIT.
(N32_IMMS): Remove duplicate mask.
opcodes/
* nds32-dis.c (print_insn16, print_insn32): Remove forward decls.
(struct objdump_disasm_info): Delete.
(nds32_parse_audio_ext, nds32_parse_opcode): Cast result of
N32_IMMS to unsigned before shifting left.
Commit 8c9b417187 didn't remove a glaring left shift of a number
that had just been sign extended.
* moxie-dis.c (INST2OFFSET): Don't left shift a signed value.
(print_insn_moxie): Remove unnecessary cast.
This removes symbol_set_language and SYMBOL_SET_LANGUAGE in favor of
a new function general_symbol_info::set_language. symbol and minimal_symbol
already inherit from that struct so this works naturally.
gdb/ChangeLog:
2019-12-15 Christian Biesinger <cbiesinger@google.com>
* ada-exp.y (write_ambiguous_var): Update.
* coffread.c (process_coff_symbol): Update.
* ctfread.c (ctf_add_enum_member_cb): Update.
(new_symbol): Update.
* dwarf2read.c (fixup_go_packaging): Update.
(new_symbol): Update.
* language.c (language_alloc_type_symbol): Update.
* mdebugread.c (new_symbol): Update.
* minsyms.c (minimal_symbol_reader::record_full): Update.
* psymtab.c (add_psymbol_to_bcache): Update.
* stabsread.c (define_symbol): Update.
(read_enum_type): Update.
* symtab.c (symbol_set_language): Make this a member function...
(general_symbol_info::set_language): ... here.
* symtab.h (struct general_symbol_info) <set_language>: New function.
(SYMBOL_SET_LANGUAGE): Remove.
(symbol_set_language): Remove.
Change-Id: Ideafb6c384004b9adef793a1192735c501da41d5
Instead of using SYMBOL_LANGUAGE (sym) = foo.
Having only a single way to set a symbol's language is clearer and this
is also a requirement for making set_language a member function.
gdb/ChangeLog:
2019-12-15 Christian Biesinger <cbiesinger@google.com>
* ada-exp.y (write_ambiguous_var): Call symbol_set_language to
set the language of sym.
* language.c (language_alloc_type_symbol): Likewise.
Change-Id: I85338ea2e4121155f2da222fe0aa6b7d3ffe26f7
In this commit:
commit 086baaf134
Date: Tue Oct 15 16:18:26 2019 +0100
gdb/python: Introduce gdb.lookup_static_symbols
A duplicate description of gdb.lookup_global_symbol was accidentally
added. This commit corrects this mistake and removes the duplicate.
gdb/doc/ChangeLog:
* python.texi (Symbols In Python): Remove duplicate description of
gdb.lookup_global_symbol.
Change-Id: I4457b42cf05bde39e5c0ff39f168af919cad1255
This change adds support for the unlink system call, which is
required by the GCC testsuite. It also switches read/write/open
system calls to use the sim_io_* functions.
2019-12-14 Anthony Green <green@moxielogic.com>
* interp.c (sim_engine_run): Make use of sim_io_* functions for
read/write/open system calls. Implement the unlink system call.
Ref.: https://bugzilla.redhat.com/show_bug.cgi?id=1728147
Ref.: https://sourceware.org/bugzilla/show_bug.cgi?id=23613
Hi,
This bug has been reported against Fedora GDB, but there's also an
upstream bug. The problem reported is that GDB segfaults when the
working directory is deleted. It's pretty use to reproduce it:
mkdir bla
cd bla
rmdir ../bla
gdb echo
Debugging the problem is a bit tricky, because, since the current
directory doesn't exist anymore, a corefile cannot be saved there.
After a few attempts, I came up with the following:
gdb -ex 'shell mkdir bla' -ex 'cd bla' -ex 'shell rmdir ../bla' -ex 'r echo' ./gdb/gdb
This assumes that you're inside a build directory which contains
./gdb/gdb, of course.
After investigating it, I found that the problem happens at
gdb_abspath, where we're dereferencing 'current_directory' without
checking if it's NULL:
...
(concat (current_directory,
IS_DIR_SEPARATOR (current_directory[strlen (current_directory) - 1])
? "" : SLASH_STRING,
...
So I fixed the problem with the patch below. The idea is that, if
'current_directory' is NULL, then the final string returned should be
just the "path".
After fixing the bug, I found a similar one reported against our
bugzilla: PR gdb/23613. The problem is the same, but the reproducer
is a bit different.
I really tried writing a testcase for this, but unfortunately it's
apparently not possible to start GDB inside a non-existent directory
with DejaGNU.
I regression tested this patch on the BuildBot, and no regressions
were found.
gdb/ChangeLog:
2019-12-14 Sergio Durigan Junior <sergiodj@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1728147
PR gdb/23613
* bsd-kvm.c (bsd_kvm_target_open): Use 'gdb_abspath'.
* corelow.c: Include 'gdbsupport/pathstuff.h'.
(core_target_open): Use 'gdb_abspath'.
* gdbsupport/pathstuff.c (gdb_abspath): Guard against
'current_directory == NULL' case.
* gdbsupport/pathstuff.h (gdb_abspath): Expand comment and
explain what happens when 'current_directory' is NULL.
* go32-nat.c (go32_nat_target::wait): Check if
'current_directory' is NULL before call to 'chdir'.
* source.c (add_path): Use 'gdb_abspath'.
* top.c: Include 'gdbsupport/pathstuff.h'.
(init_history): Use 'gdb_abspath'.
(set_history_filename): Likewise.
* tracefile-tfile.c: Include 'gdbsupport/pathstuff.h'.
(tfile_target_open): Use 'gdb_abspath'.
Change-Id: Ibb0932fa25bc5c2d3ae4a7f64bd7f32885ca403b
This reverts commit 62e77f56f0.
(except for ChangeLog and a bugfix in minimal_symbol_reader::install)
As agreed on the mailing list, now that GDB 9 has branched, this patch
reverts the change to set worker-threads to zero. After this patch,
multithreaded minsym demangling will be enabled again by default.
gdb/ChangeLog:
2019-12-13 Christian Biesinger <cbiesinger@google.com>
* maint.c (n_worker_threads): Default to -1.
(worker_threads_disabled): Remove function.
* maint.h (worker_threads_disabled): Remove function.
* minsyms.c (minimal_symbol_reader::record_full): Don't call
symbol_set_names here if worker_threads_disabled () is true.
Change-Id: I5ff3e318d96f60968c8b8bedb84546ad2314d94b
ARI has a check for multiple calls to warning or error, suggesting
that they be combined into a single call. This triggers at three
places in gdb -- throw_bad_regnum_error, guile_repl_command, and the
end of value_cast -- and after examining these, I think they all make
sense as-is. Instead, it makes sense to remove this check from ARI.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove check for multiple calls to
warning or error.
Change-Id: I0618683623a3c7324460c7b9e5d7f252d88c2e8d
ARI has a "fix" call for "long long", but this call is incorrect.
This patch removes it.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove call to "fix" for "long long".
Change-Id: I97bca2dc04b579fcf7c9dba7fe7fd939451bcefa
This adds -Wno- support to ARI, so that warnings can be disabled
selectively. I use this to ignore "deprecated" warnings.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Handle -Wno- prefix.
Change-Id: I6919faedf920e857df4f597df66f0ba3943e0eac
This changes the ARI usage text to use the GNU style for
"metasyntactic variables".
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh (usage): Use GNU style.
Change-Id: Ibe5a867571382d2985d1b8b78dfef3ddd02291ff
A few spots can validly call vsprintf; this adds ARI markers to
suppress warnings at these places.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* gdbsupport/common-utils.c (string_printf, string_vprintf)
(string_vappendf): Add ARI comment.
Change-Id: Ia8665aa5d7b7331a3985b18626b19764a264447b
This silences ARI at the one spot that is permitted to call
floatformat_to_double, and also removes the corresponding "fix" call
from gdb_ari.sh -- it was incorrect, and now is not needed.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove "fix" call for
floatformat_to_double.
* target-float.c (host_float_ops<T>::from_target): Add ARI
comment.
Change-Id: I778a17a04da417c113194004dd7de3b1df381266
There are a handful of spots in gdb that validly call abort. This
patch adds the appropriate ARI marker to these lines, to silence the
ARI report. This also removes the "fix" call for "abort" from
gdb_ari.sh; it was incorrect and now is not needed.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove "fix" call for abort.
* utils.c (abort_with_message, dump_core, internal_vproblem): Add
ARI marker to abort.
* event-top.c (handle_sigsegv): Add ARI marker to abort.
Change-Id: I09ce6aa5010bbe4e5bb73ffdb727481be39d34d6
ARI reports the wrong substitution for floatformat_from_double.
"floatformat_from_doublest" was renamed in 2017.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Fix floatformat_from_double text.
Change-Id: Ibf1b194ea509b12ae8bc30ce285c809c96218557
The text for the ATTRIBUTE_UNUSED check in ARI is plainly incorrect
now -- gdb does in fact use ATTRIBUTE_UNUSED, and there's no issue in
doing so, when done properly.
This patch removes this check.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove ATTRIBUTE_UNUSED check.
Change-Id: I13fd8e9b40dbaab3978dbf9b6c4228b62299d944
The "boolean" and "var_boolean" checks from ARI seem only to generate
false reports.
Now that gdb is in C++, at least the "boolean" check seems unlikely to
ever generate a true report.
The "var_boolean" check likewise doesn't seem valuable any more --
presumably this refers to some ancient way of doing things in gdb, and
isn't likely to find a bug in the future.
Therefore, this patch removes these two checks.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove "boolean" and "var_boolean"
checks.
Change-Id: Iaf449b51e8182ffa0b9ed25fe688e0ff64a07a67
The Solaris buildbot builder complained about some recent patches of
mine. Building with GCC 7 failed.
This patch fixes the bug. I'm checking it in.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* gdbsupport/safe-iterator.h (class basic_safe_range) <begin,
end>: No longer "const".
Change-Id: I5f428fab61087f467ac3b6475f4ef4dbd314fcb0
Many places in this file use spaces only for indentation. Fix them to
conform to GNU style.
gdb/ChangeLog:
* jit.c: Fix indentation, replace spaces with tabs where
applicable.
This enables support for the msp430-elfbare target being added to GCC.
gdb/ChangeLog:
2019-12-13 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* configure.tgt: Match msp430-*-elf* targets when configuring GDB.
PR 25237
* elf.c (assign_file_positions_for_load_sections): Attempt to
keep meaningless p_offset for PT_LOAD segments without file
contents within file size.
A plan I had a while ago was to write the DWARF index in a worker
thread. This is why objfile::partial_symtabs is a shared_ptr.
However, it turned out that doing this required keeping the objfile
alive as well. Now that objfiles are managed using shared_ptr,
there's no need for partial_symtabs to be one as well, so this patch
reverts that change.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* objfiles.h (struct objfile) <partial_symtabs>: Now a
unique_ptr.
Change-Id: I3d7831006c40d4c8f3173ba51c0c1b0a32021ae5
This changes objfiles to be managed using a shared_ptr. shared_ptr is
chosen because it enables the use of objfiles in background threads.
The simplest way to do this was to introduce a new iterator that will
return the underlying objfile, rather than a shared_ptr. (I also
tried changing the rest of gdb to use shared_ptr, but this was quite
large; and to using intrusive reference counting, but this also was
tricky.)
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* progspace.h (objfile_list): New typedef.
(class unwrapping_objfile_iterator)
(struct unwrapping_objfile_range): Newl
(struct program_space) <objfiles_range>: Change type.
<objfiles>: Change return type.
<add_objfile>: Change type of "objfile" parameter.
<objfiles_list>: Now a list of shared_ptr.
* progspace.c (program_space::add_objfile): Change type of
"objfile". Update.
(program_space::remove_objfile): Update.
* objfiles.h (struct objfile) <~objfile>: Make public.
* objfiles.c (objfile::make): Update.
(objfile::unlink): Don't call delete.
Change-Id: I6fb7fbf06efb7cb7474c525908365863eae27eb3
This changes free_all_objfiles to be a method on program_space, in
line with the other changes to treat program_space as a container for
objfiles.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (symbol_file_clear): Update.
* progspace.h (struct program_space) <free_all_objfiles>: Declare
method.
* progspace.c (program_space::free_all_objfiles): New method.
* objfiles.h (free_all_objfiles): Don't declare.
* objfiles.c (free_all_objfiles): Move to program_space.
Change-Id: I908b549d2981b6005f7ca181fc0e6d24fc8b7b6f
This introduces the basic_safe_range class, which can be used to
create a basic_safe_iterator. This also changes basic_safe_iterator
in two ways.
First, it simplifies the constructor. This seemed unnecessarily
complicated to me, and keeping it this way would prevent the second
change...
... which is to add a second constructor for initializing the
one-past-the-end iterator that is stored in basic_safe_iterator.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* gdbsupport/safe-iterator.h (basic_safe_iterator): Simplify. Add
second constructor.
(basic_safe_range): New class.
Change-Id: Ib351ef6fd435129a5053c64e5561877e1459ab37
This removes the MULTI_OBJFILE_P macro in favor of a method on the
program space.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* progspace.c (program_space::multi_objfile_p): New method.
* printcmd.c (info_symbol_command): Update.
* maint.c (maintenance_translate_address): Update.
* objfiles.h (MULTI_OBJFILE_P): Remove.
* progspace.h (struct program_space) <multi_objfile_p>: New
method.
Change-Id: I2779e26ea8909078d63fea8f13bce94cab73948c
This introduces a new method, program_space::remove_objfile, and
changes the objfile destructor not to unlink an objfile from the
program space's list.
This is cleaner because, like the previous patch, it treats the
program space more like a container for objfiles. Also, this makes it
possible to keep an objfile alive even though it has been unlinked
from the program space's list, which is important for processing in a
worker thread.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* progspace.h (struct program_space) <remove_objfile>: Declare.
* progspace.c (program_space::remove_objfile): New method.
* objfiles.c (unlink_objfile): Remove.
(objfile::unlink): Call remove_objfile.
(objfile): Don't call unlink_objfile.
Change-Id: I22f768827723dce21886fae9b3664532c8349e68
This introduces a new method, program_space::add_objfile, that adds an
objfile to the program space's list of objfiles. It also changes the
obfile's constructor so that linking an objfile into this list is not
done here.
The former is an improvement because it makes more sense to treat the
program space as a container holding objfiles -- so manipulation of
the list belongs there.
The latter is not strictly needed, but seemed better both because it
is removing a global side effect from a constructor, and for symmetry
reasons, as a subsequent patch will remove unlinking from the
destructor.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* progspace.h (struct program_space) <add_objfile>: Declare
method.
* progspace.c (program_space::add_objfile): New method.
* objfiles.c (~objfile): Don't unlink objfile.
(put_objfile_before): Remove.
(add_separate_debug_objfile): Don't call put_objfile_before.
(objfile::make): Call add_objfile. Set new_objfiles_available on
the per-program-space data.
Change-Id: I93e8525dda631cb89dcc2046a5c51c7c9f34ccfd
The idea behind this is that, in the long run, some code will need to
be able to hold onto an objfile after it is unlinked from the program
space. In particular, this is needed for some functionality to be
moved to worker threads -- otherwise the objfile can be deleted while
still in use.
So, this makes ~objfile private, replacing it with an "unlink" method,
making it more obvious which operation is intended at the calling
points.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (syms_from_objfile_1): Use objfile_up.
(syms_from_objfile_1, remove_symbol_file_command): Call unlink
method.
(reread_symbols): Use objfile_up.
* solib.c (update_solib_list, reload_shared_libraries_1): Call
unlink method.
* objfiles.h (struct objfile) <~objfile>: Now private.
<unlink>: New method.
(struct objfile_deleter): New.
(objfile_up): New typedef.
* objfiles.c (objfile::unlink): New method.
(free_objfile_separate_debug, free_all_objfiles)
(objfile_purge_solibs): Use it.
* jit.c (jit_unregister_code): Remove.
(jit_inferior_exit_hook, jit_event_handler): Call unlink on
objfile.
* compile/compile-object-run.c (do_module_cleanup): Call unlink on
objfile.
* compile/compile-object-load.c (compile_object_load): Use
objfile_up.
Change-Id: I934bee70b26b8b24e1735828fb1e60fe8a05714f
This changes objfile::make to take a "parent" parameter, and makes
add_separate_debug_objfile static.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (symbol_file_add_with_addrs): Pass "parent" to
objfile::make.
* objfiles.h (struct objjfile) <make>: No longer inline.
(add_separate_debug_objfile): Don't declare.
* objfiles.c (add_separate_debug_objfile): Now static.
(objfile::make): Move from objfiles.h. Call
add_separate_debug_objfile. Add "parent" parameter.
Change-Id: I631f43bb71738dea6ae0697317bf8ef4a0db4617
This changes the objfile constructor to be private, changing the
callers to use a factory method. This isn't perhaps strictly needed
for the goal of this series -- changing the container model of
objfiles -- but is a nice symmetry.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (symbol_file_add_with_addrs): Use objfile::make.
* objfiles.h (struct objfile): Make constructor private.
<make>: New static method.
* jit.c (jit_object_close_impl): Update.
Change-Id: I42e07bc80a88cf3322ace94ffe869ae5788bcb29
Similar to SP, BP, SI and DI registers, R12-R15 registers must use REX
prefix for the low byte register when optimizing
test $imm7, %r64/%r32/%r16 -> test $imm7, %r8
PR gas/25274
* config/tc-i386.c (optimize_encoding): Also check R12-R15
registers for "test $imm7, %r64/%r32/%r16 -> test $imm7, %r8"
optimization.
* testsuite/gas/i386/x86-64-optimize-3.s: Add tests for test
with r12.
* testsuite/gas/i386/x86-64-optimize-3.d: Updated.
* testsuite/gas/i386/x86-64-optimize-3b.d: Likewise.
