PR 27793
* som.c (som_slurp_symbol_table): Assign symbols without any scope
to the undefined section.
(som_decode_symclass): Check for a missing symbol section.
* syms.c (bfd_decode_symclass): Likewise.
PR 27792
* som.c (som_slurp_string_table): Place a terminating NUL byte at
the end of the table.
(som_slurp_symbol_table): Check for an over-large offset into the
string string table.
bfd * elf.c (_bfd_elf_maybe_function_sym): Do not accept annobin
symbols as potential function symbols.
* elfnn-aarch64.c (elfNN_aarch64_maybe_function_sym): Likewise.
* elf64-ppc.c (ppc64_elf_maybe_function_sym): Likewise.
* elf32-arm.c (elf32_arm_maybe_function_sym): Likewise.
ld * testsuite/ld-elf/anno-sym.s: New test source file.
* testsuite/ld-elf/anno-sym.d: New test driver.
* testsuite/ld-elf/anno-sym.l: New test error output.
The only insn requiring a truly 16-bit PC-relative relocation outside of
16-bit mode is XBEGIN (with an operand size override). For it, the
relocation generated should behave similar to 8- and (for 64-bit) 32-bit
PC-relatives ones, i.e. be checked for a signed value to fit the field.
This same mode is also correct for 16-bit code. Outside of 16-bit code,
branches with operand size overrides act in a truly PC-relative way only
when living in the low 32k of address space, as they truncate rIP to 16
bits. This can't be expressed by a PC-relative relocation.
Putting in place a new testcase, I'd like to note that the two existing
ones (pcrel16 and pcrel16abs) appear to be pretty pointless: They don't
expect any error despite supposedly checking for overflow, and in fact
there can't possibly be any error for the
- former since gas doesn't emit any relocation in the first place there,
- latter because the way the relocation gets expressed by gas doesn't
allow the linker to notice the overflow; it should be detected by gas
if at all, but see above (an error would be reported here for x86-64
afaict, but this test doesn't get re-used there).
The change implementing the .persistent family of sections broke the
existing support for the .persistent.bss section in the compiler:
int a __attribute__ ((section (".persistent.bss")));
t.s: Assembler messages:
t.s:4: Warning: setting incorrect section type for .persistent.bss
The compiler encodes it as @nobits but the assembler expects @progbits.
The assembler is incorrect and should treat the section like the compiler.
bfd/
* elf.c (special_sections_p): Add .persistent.bss.
gas/
* testsuite/gas/elf/section25.d: Run it everywhere.
* testsuite/gas/elf/section26.d: Likewise.
* testsuite/gas/elf/section26.s: Add test for .persistent.bss.
These are marker relocations, so together with their bit size being zero
their byte size should be zero as well. This is expressed by a value of
3, not 0.
bfd/ChangeLog:
* coff-rs6000.c (_bfd_xcoff_swap_aux_in): Add errors for
unsupported storage class or auxialiry entries.
Improve and adapt to new aux structures.
Add C_DWARF support.
(_bfd_xcoff_swap_aux_out): Likewise.
* coff64-rs6000.c (_bfd_xcoff64_swap_aux_in): Likewise.
(_bfd_xcoff64_swap_aux_out): Likewise.
binutils/ChangeLog:
* od-xcoff.c (dump_xcoff32_symbols): Adapt to new
aux structures.
include/ChangeLog:
* coff/internal.h (union internal_auxent):
Add x_sect structure.
* coff/rs6000.h (union external_auxent): Rework to
match official documentation.
* coff/rs6k64.h (union external_auxent): Likewise.
(_AUX_SECT): New define.
PR 27760
include * coff/pe.h (IMAGE_DLLCHARACTERISTICS_APPCONTAINER): Define.
(IMAGE_DLLCHARACTERISTICS_GUARD_CF): Define.
bfd * peXXigen.c (_bfd_XX_print_private_bfd_data_common): Add display
of IMAGE_FILE_REMOVABLE_RUN_FROM_SWAP,
IMAGE_FILE_NET_RUN_FROM_SWAP and IMAGE_FILE_UP_SYSTEM_ONLY flags.
Decode the contents of the DllCharacteristics field.
So don't set those flags for an executable. In the patch I also test
DYNAMIC even though the PE bfd code doesn't appear to set it for dlls.
I figure it doesn't hurt to include that flag too.
PR 27567
bfd/
* coffcode.h (styp_to_sec_flags): Use an unsigned long styp_flags.
(coff_write_object_contents): Pass bfd to COFF_ENCODE_ALIGNMENT,
ignore alignment checks when return is false. Formatting.
include/
* coff/internal.h (struct internal_scnhdr): Make s_flags unsigned long.
* coff/pe.h (COFF_ENCODE_ALIGNMENT): Don't set align flags for an
executable and return false. Do so for a relocatable object and
evaluate to true.
* coff/ti.h (COFF_ENCODE_ALIGNMENT): Add bfd arg and evaluate to true.
(COFF_DECODE_ALIGNMENT): Formatting.
* coff/z80.h (COFF_ENCODE_ALIGNMENT): Similarly.
(COFF_DECODE_ALIGNMENT): Similarly.
The local ".L0" symbol are usually generated to mark where the
auipc instruction is, and clang also uses ".LBB" to do the same
thing. Besides, clang also uses the empty name symbols for label
differences. Arm surpress their mapping symbols by regarding them
as special symbols, and MIPS surpress all local symbols. Therefore,
RISC-V probably need to surpress the local and empty name symbols
for nm and related tools. User can use "--special-syms" to show
these surpressed symbols.
bfd/
PR27584
* elfnn-riscv.c (riscv_elf_is_target_special_symbol): Added to
omit local and empty symbols since they usually generated to
mark the auipc instructions.
Since p_memsz of the loadable PT_NOTE segment should be the same as
p_filesz, set p_memsz on the loadable PT_NOTE segment when updating
p_filesz.
bfd/
PR binutils/27708
* elf.c (assign_file_positions_for_non_load_sections): Set
p_memsz to p_filesz for the loadable PT_NOTE segment.
binutils/
PR binutils/27708
* testsuite/binutils-all/x86-64/pr27708.dump: New file.
* testsuite/binutils-all/x86-64/pr27708.exe.bz2: Likewise.
* testsuite/binutils-all/x86-64/x86-64.exp: Run binutils/27708
test.
git commit b95a0a3177 changed a "return FALSE" to "continue", and
missed updating the while loop iterator.
* xcofflink.c (xcoff_link_check_ar_symbols): Update esym earlier.
bfd/
* elfnn-riscv.c (riscv_version_mismatch): Do not report the warning
when the version of input or output is RISCV_UNKNOWN_VERSION, since
the extension is added implicitly.
* elfxx-riscv.c: Updated the obsolete comments.
(RISCV_UNKNOWN_VERSION): Moved to elfxx-riscv.h.
* elfxx-riscv.h (RISCV_UNKNOWN_VERSION): Added.
elf_backend_archive_symbol_lookup might be called when the linker hash
table has entries of type generic_link_hash_entry. This happens for
instance when running the mmix target linker testsuite where the
output is mmo but input is elf64-mmix.
* elf-bfd.h (struct elf_backend_data): Return bfd_link_hash_entry*
from elf_backend_archive_symbol_lookup.
(_bfd_elf_archive_symbol_lookup): Return bfd_link_hash_entry*.
* elf64-ppc.c (ppc64_elf_archive_symbol_lookup): Likewise. Check
we have a ppc_hash_table before accessing ppc_link_hash_entry
fields.
* elflink.c (_bfd_elf_archive_symbol_lookup): Return
bfd_link_hash_entry*.
(elf_link_add_archive_symbols): Adjust to suit.
Fix the wrong version of i-ext when expanding g-ext. This was changed by
the previous patch accidently.
bfd/
* elfxx-riscv.c (riscv_parse_std_ext): Fixed the wrong versions of
i-ext when expanding g-ext.
The linker does not care the default versions of the extensions, since
it does not have the default ISA spec setting. Therefore, linker won't
insert the implicit extensions for the input objects. But we used to
insert the i-ext as the explicit extension, even if the e-ext is set.
This causes linker to report "cannot find default versions of the ISA
extension `i'" errors when linking the input objects with e-ext.
This patch fixes the above linker problem, and also remove the confused
riscv_ext_dont_care_version function. Unless these "dont care" extensions
are set in the input architecture explicitly, otherwise we always insert
them as the implicit ones. Afterwards, let riscv_arch_str1 surpress them
not to output to the architecture string if their versions are
RISCV_UNKNOWN_VERSION.
bfd/
* elfxx-riscv.c (riscv_ext_dont_care_version): Removed.
(riscv_parse_add_subset): Always add the implicit extensions, even if
their versions are RISCV_UNKNOWN_VERSION.
(riscv_parse_std_ext): Delay to add i-ext as the implicit extension
in the riscv_parse_add_implicit_subsets. Besides, add g-ext as the
implicit extension after it has been expanded.
(riscv_parse_add_implicit_subsets): Updated.
The original discussion is as follows,
https://github.com/riscv/riscv-isa-manual/issues/637
I never considered the prefixes may have multiple letters, like zxm.
But the ISA spec has been updated for a long time that I haven't noticed.
This patch rewrites the part of architecture parser to support parsing
the multi-letter prefixes. Besides, I also improve the parser to report
errors in details. One of the most obvious improvement is - Do not parse
the prefixed extensions according to the orders in the parse_config.
If we do so, then we used to get "unexpected ISA string at end" errors,
but the message is a little bit hard to know what is happening. I Remove
the confused message, and let riscv_parse_prefixed_ext to report the details.
bfd/
* elfxx-riscv.c (riscv_std_z_ext_strtab): Moved forward.
(riscv_std_s_ext_strtab): Likewise.
(riscv_std_h_ext_strtab): Likewise.
(riscv_std_zxm_ext_strtab): Added for the zxm prefix.
(enum riscv_prefix_ext_class): Moved forward and renamed from
riscv_isa_ext_class. Reorder them according to the parsing order,
since the enum values are used to check the orders in the
riscv_compare_subsets.
(struct riscv_parse_prefix_config): Moved forward and renamed from
riscv_parse_config_t. Also removed the ext_valid_p field, the
related functions are replaced by riscv_valid_prefixed_ext.
(parse_config): Moved forward and updated. The more letters of the
prefix string, the more forward it must be defined. Otherwise, we
will get the wrong mapping when using strncmp in riscv_get_prefix_class.
(riscv_get_prefix_class): Moved forward. Support to parse the
multi-letter prefix, like zxm.
(riscv_known_prefixed_ext): New function, check if the prefixed
extension is supported according to the right riscv_std_*_ext_strtab.
(riscv_valid_prefixed_ext): New function, used to replace the
riscv_ext_*_valid_p functions.
(riscv_init_ext_order): Do not set the values for prefix keywords
since they may have multiple letters for now.
(riscv_compare_subsets): Set the order values of prefix keywords
to negative numbers according to the riscv_prefix_ext_class.
(riscv_parse_std_ext): Call riscv_get_prefix_class to see if we
have parsed the prefixed extensions.
(riscv_parse_prefixed_ext): Updated and removed the parameter config.
Report error when the prefix is unknown.
(riscv_parse_subset): Do not parse the prefixed extensions according
to the orders in the parse_config. Remove the confused message and
let riscv_parse_prefixed_ext to report the details.
* elfxx-riscv.h (enum riscv_isa_ext_class): Moved to elfxx-riscv.c.
(riscv_get_prefix_class): Removed to static.
gas/
* testsuite/gas/riscv/march-fail-order-x-std.d: Renamed from
march-fail-porder-x-std.d.
* testsuite/gas/riscv/march-fail-order-z-std.d: Renamed from
march-fail-porder-z-std.d.
* testsuite/gas/riscv/march-fail-order-x-z.d: Renamed from
march-fail-porder-x-z.d.
* testsuite/gas/riscv/march-fail-order-zx-std.l: Added to replace
march-fail-porder.l.
* testsuite/gas/riscv/march-fail-order-x-z.l: Likewise.
* testsuite/gas/riscv/march-fail-order-x.l: Updated.
* testsuite/gas/riscv/march-fail-order-z.l: Likewise.
* testsuite/gas/riscv/march-fail-single-prefix-h.d: Renamed from
march-fail-single-char-h.d.
* testsuite/gas/riscv/march-fail-single-prefix-s.d: Renamed from
march-fail-single-char-s.d.
* testsuite/gas/riscv/march-fail-single-prefix-x.d: Renamed from
march-fail-single-char-x.d.
* testsuite/gas/riscv/march-fail-single-prefix-z.d: Renamed from
march-fail-single-char-z.d.
* testsuite/gas/riscv/march-fail-single-prefix-zmx.d: Added.
* testsuite/gas/riscv/march-fail-single-prefix.l: Added to replace
march-fail-single-prefix.l.
* testsuite/gas/riscv/march-fail-unknown-zxm.d: Added.
* testsuite/gas/riscv/march-fail-unknown-std.l: Updated.
* testsuite/gas/riscv/march-fail-unknown.l: Likewise.
