gas * config/tc-arm.c (arm_extensions):
(arm_archs): New entry for "armv8.4-a".
Add FPU_ARCH_DOTPROD_NEON_VFP_ARMV8.
(arm_ext_v8_2): New variable.
(enum arm_reg_type): New enumeration REG_TYPE_NSD.
(reg_expected_msgs): New entry for REG_TYPE_NSD.
(parse_typed_reg_or_scalar): Handle REG_TYPE_NSD.
(parse_scalar): Support REG_TYPE_VFS.
(enum operand_parse_code): New enumerations OP_RNSD and OP_RNSD_RNSC.
(parse_operands): Handle OP_RNSD and OP_RNSD_RNSC.
(NEON_SHAPE_DEF): New entries for DHH and DHS.
(neon_scalar_for_fmac_fp16_long): New function to generate Rm encoding
for new FP16 instructions in ARMv8.2-A.
(do_neon_fmac_maybe_scalar_long): New function to encode new FP16
instructions in ARMv8.2-A.
(do_neon_vfmal): Wrapper function for vfmal.
(do_neon_vfmsl): Wrapper function for vfmsl.
(insns): New entries for vfmal and vfmsl.
* doc/c-arm.texi (-march): Document "armv8.4-a".
* testsuite/gas/arm/dotprod-mandatory.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16.s: New test source.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.s: New test source.
* testsuite/gas/arm/armv8_2-a-fp16.d: New test.
* testsuite/gas/arm/armv8_3-a-fp16.d: New test.
* testsuite/gas/arm/armv8_4-a-fp16.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16-thumb2.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.l: New error file.
opcodes * arm-dis.c (coprocessor_opcodes): New entries for ARMv8.2-A new
FP16 instructions, including vfmal.f16 and vfmsl.f16.
include * opcode/arm.h (ARM_AEXT2_V8_4A): Include Dot Product feature.
(ARM_EXT2_V8_4A): New macro.
(ARM_AEXT2_V8_4A): Likewise.
(ARM_ARCH_V8_4A): Likewise.
According to ARMv8-A architecture manual, REG_SP is allowed in CRC32
instructions in Thumb mode. It is REG_PC that will cause unpredictable
behaviours on both ARM and Thumb.
This patch removes the incorrect warning on Thumb mode.
Meanwhile the disassembler is updated to use format "<bitfield>R" instead of
"<bitfield>S". "<bitfield>S" is not used elsewhere. so I have deleted related
code from the disassembler.
gas/
* config/tc-arm.c (do_crc32_1): Remove warning on REG_SP for thumb_mode.
* testsuite/gas/arm/crc32-armv8-a-bad.d: Update exepcted result.
* testsuite/gas/arm/crc32-armv8-r-bad.d: Likewise.
* testsuite/gas/arm/crc32-armv8-a.d: Likewise.
* testsuite/gas/arm/crc32-armv8-r.d: Likewise.
* testsuite/gas/arm/crc32-armv8-ar-bad.s: Update test case.
* testsuite/gas/arm/crc32-armv8-ar.s: Likewise.
* testsuite/gas/arm/crc32-bad.l: Update expected error message.
opcode/
* arm-dis.c (thumb32_opcodes): Use format 'R' instead of 'S' for
register operands in CRC instructions.
(print_insn_thumb32): Remove "<bitfield>S" support. Updated the
comments.
This patch adds support mvfr2 control registers for armv8-a as
this was missed from the original port to armv8-a (documented
at G6.2.109 in (Issue B.a) of the ARM-ARM. This was discovered
by an internal user of the GNU toolchain.
I'd like to backport this to the binutils 2.28 and binutils 2.29
release branch if possible (with suitable testing and basically
checking removing the armv8-r parts).
Tristan - are you ok with the backports ?
Applied to trunk.
regards Ramana
2017-07-04 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
* gas/config/tc-arm.c (arm_regs): Add MVFR2.
(do_vmrs): Constraint for MVFR2 and armv8.
(do_vmsr): Likewise.
* gas/testsuite/gas/arm/armv8-a+fp.d: Update.
* gas/testsuite/gas/arm/armv8-ar+fp.s: Likewise.
* gas/testsuite/gas/arm/armv8-r+fp.d: Likewise.
* gas/testsuite/gas/arm/vfp-bad.s: Likewise.
* gas/testsuite/gas/arm/vfp-bad.l: Likewise.
* opcodes/arm-dis.c: Support MVFR2 in disassembly
with vmrs and vmsr.
This patch add assembler and disassembler support for new Dot Product
Extension.
The support can be enabled through the new "+dotprod" extension.
include/
* opcode/arm.h (FPU_NEON_EXT_DOTPROD): New macro.
(FPU_ARCH_DOTPROD_NEON_VFP_ARMV8): New macro.
gas/
* config/tc-arm.c (fpu_neon_ext_dotprod): New variable.
(neon_scalar_for_mul): Improve comments.
(do_neon_dotproduct): New function to encode Dot Product instructions.
(do_neon_dotproduct_s): Wrapper function for signed Dot Product
instructions.
(do_neon_dotproduct_u): Wrapper function for unsigned Dot Product
instructions.
(insns): New entries for vsdot and vudot.
(arm_extensions): New entry for "dotprod".
* doc/c-arm.texi: Document new "dotprod" extension.
* testsuite/gas/arm/dotprod.s: New test source.
* testsuite/gas/arm/dotprod-illegal.s: New test source.
* testsuite/gas/arm/dotprod.d: New test.
* testsuite/gas/arm/dotprod-thumb2.d: New test.
* testsuite/gas/arm/dotprod-illegal.d: New test.
* testsuite/gas/arm/dotprod-legacy-arch.d: New test.
* testsuite/gas/arm/dotprod-illegal.l: New error file.
* testsuite/gas/arm/dotprod-legacy-arch.l: New error file.
opcodes/
* arm-dis.c (coprocessor_opcodes): New entries for vsdot and vudot.
This is a follow-up to
[PATCH 0/6] Unify the disassembler selection in gdb and objdump
https://sourceware.org/ml/binutils/2017-05/msg00192.html
that is, opcodes is able to select the right disassembler, so gdb
doesn't have to select them. Instead, gdb can just use
default_print_insn. As a result, these print_insn_XXX are not used
out of opcodes, so this patch also moves their declarations from
include/dis-asm.h to opcodes/disassemble.h. With this change,
GDB doesn't use any print_insn_XXX directly any more.
gdb:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_gdb_print_insn): Call
default_print_insn instead of print_insn_aarch64.
* arm-tdep.c (gdb_print_insn_arm): Call
default_print_insn instead of print_insn_big_arm
and print_insn_little_arm.
* i386-tdep.c (i386_print_insn): Call default_print_insn
instead of print_insn_i386.
* ia64-tdep.c (ia64_print_insn): Call
default_print_insn instead of print_insn_ia64.
* mips-tdep.c (gdb_print_insn_mips): Call
default_print_insn instead of print_insn_big_mips
and print_insn_little_mips.
* spu-tdep.c (gdb_print_insn_spu): Call default_print_insn
instead of print_insn_spu.
include:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (print_insn_aarch64): Move it to opcodes/disassemble.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
(print_insn_spu): Likewise.
opcodes:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c: Include disassemble.h instead of dis-asm.h.
* arm-dis.c: Likewise.
* ia64-dis.c: Likewise.
* mips-dis.c: Likewise.
* spu-dis.c: Likewise.
* disassemble.h (print_insn_aarch64): New declaration, moved from
include/dis-asm.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
The memory disassemble_info::disassembler_options points to is always
owned by the client. I.e., that field is an non-owning, observing
pointer. Thus const makes sense.
Are the include/ and opcodes/ bits OK?
Tested on x86_64 Fedora 23, built with --enable-targets=all.
include/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* dis-asm.h (disassemble_info) <disassembler_options>: Now a
"const char *".
(next_disassembler_option): Constify.
opcodes/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arc-dis.c (parse_option, parse_disassembler_options): Constify.
* arm-dis.c (parse_arm_disassembler_options): Constify.
* ppc-dis.c (powerpc_init_dialect): Constify local.
* vax-dis.c (parse_disassembler_options): Constify.
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arm-tdep.c (show_disassembly_style_sfunc): Constify local.
* disasm.c (set_disassembler_options): Constify local.
* i386-tdep.c (i386_print_insn): Remove cast and FIXME comment.
This commit adds support to GDB so that it can modify the disassembler-options
value that is passed to the disassembler, similar to objdump's -M option.
Currently, the only supported targets are ARM, PowerPC and S/390, but
adding support for a new target(s) is not difficult.
include/
* dis-asm.h (disasm_options_t): New typedef.
(parse_arm_disassembler_option): Remove prototype.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(get_arm_regname_num_options): Likewise.
(disassemble_init_s390): New prototype.
(disassembler_options_powerpc): Likewise.
(disassembler_options_arm): Likewise.
(disassembler_options_s390): Likewise.
(remove_whitespace_and_extra_commas): Likewise.
(disassembler_options_cmp): Likewise.
(next_disassembler_option): New inline function.
(FOR_EACH_DISASSEMBLER_OPTION): New macro.
opcodes/
* disassemble.c Include "safe-ctype.h".
(disassemble_init_for_target): Handle s390 init.
(remove_whitespace_and_extra_commas): New function.
(disassembler_options_cmp): Likewise.
* arm-dis.c: Include "libiberty.h".
(NUM_ELEM): Delete.
(regnames): Use long disassembler style names.
Add force-thumb and no-force-thumb options.
(NUM_ARM_REGNAMES): Rename from this...
(NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE.
(get_arm_regname_num_options): Delete.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(parse_disassembler_options): Likewise.
(parse_arm_disassembler_option): Rename from this...
(parse_arm_disassembler_options): ...to this. Make static.
Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options.
(print_insn): Use parse_arm_disassembler_options.
(disassembler_options_arm): New function.
(print_arm_disassembler_options): Handle updated regnames.
* ppc-dis.c: Include "libiberty.h".
(ppc_opts): Add "32" and "64" entries.
(ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp.
(powerpc_init_dialect): Add break to switch statement.
Use new FOR_EACH_DISASSEMBLER_OPTION macro.
(disassembler_options_powerpc): New function.
(print_ppc_disassembler_options): Use ARRAY_SIZE.
Remove printing of "32" and "64".
* s390-dis.c: Include "libiberty.h".
(init_flag): Remove unneeded variable.
(struct s390_options_t): New structure type.
(options): New structure.
(init_disasm): Rename from this...
(disassemble_init_s390): ...to this. Add initializations for
current_arch_mask and option_use_insn_len_bits_p. Remove init_flag.
(print_insn_s390): Delete call to init_disasm.
(disassembler_options_s390): New function.
(print_s390_disassembler_options): Print using information from
struct 'options'.
* po/opcodes.pot: Regenerate.
binutils/
* objdump.c (main): Use remove_whitespace_and_extra_commas.
gdb/
* NEWS: Mention new set/show disassembler-options commands.
* doc/gdb.texinfo: Document new set/show disassembler-options commands.
* disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h".
(prospective_options): New static variable.
(gdb_disassembler::gdb_disassembler): Initialize
m_di.disassembler_options.
(gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options.
(get_disassembler_options): New function.
(set_disassembler_options): Likewise.
(set_disassembler_options_sfunc): Likewise.
(show_disassembler_options_sfunc): Likewise.
(disassembler_options_completer): Likewise.
(_initialize_disasm): Likewise.
* disasm.h (get_disassembler_options): New prototype.
(set_disassembler_options): Likewise.
* gdbarch.sh (gdbarch_disassembler_options): New variable.
(gdbarch_verify_disassembler_options): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* arm-tdep.c (num_disassembly_options): Delete.
(set_disassembly_style): Likewise.
(arm_disassembler_options): New static variable.
(set_disassembly_style_sfunc): Convert short style name into long
option name. Call set_disassembler_options.
(show_disassembly_style_sfunc): New function.
(arm_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
(_initialize_arm_tdep): Delete regnames variable and update callers.
(arm_disassembler_options): Initialize.
(disasm_options): New variable.
(num_disassembly_options): Rename from this...
(num_disassembly_styles): ...to this. Compute by scanning through
disasm_options.
(valid_disassembly_styles): Initialize using disasm_options.
Remove calls to parse_arm_disassembler_option, get_arm_regnames and
set_arm_regname_option.
Pass show_disassembly_style_sfunc to the "disassembler" setshow command.
* rs6000-tdep.c (powerpc_disassembler_options): New static variable.
(rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
* s390-tdep.c (s390_disassembler_options): New static variable.
(s390_gdbarch_init):all set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
gdb/testsuite/
* gdb.arch/powerpc-power.exp: Delete test.
* gdb.arch/powerpc-power.s: Likewise.
* gdb.disasm/disassembler-options.exp: New test.
* gdb.arch/powerpc-altivec.exp: Likewise.
* gdb.arch/powerpc-altivec.s: Likewise.
* gdb.arch/powerpc-altivec2.exp: Likewise.
* gdb.arch/powerpc-altivec2.s: Likewise.
* gdb.arch/powerpc-altivec3.exp: Likewise.
* gdb.arch/powerpc-altivec3.s: Likewise.
* gdb.arch/powerpc-power7.exp: Likewise.
* gdb.arch/powerpc-power7.s: Likewise.
* gdb.arch/powerpc-power8.exp: Likewise.
* gdb.arch/powerpc-power8.s: Likewise.
* gdb.arch/powerpc-power9.exp: Likewise.
* gdb.arch/powerpc-power9.s: Likewise.
* gdb.arch/powerpc-vsx.exp: Likewise.
* gdb.arch/powerpc-vsx.s: Likewise.
* gdb.arch/powerpc-vsx2.exp: Likewise.
* gdb.arch/powerpc-vsx2.s: Likewise.
* gdb.arch/powerpc-vsx3.exp: Likewise.
* gdb.arch/powerpc-vsx3.s: Likewise.
* gdb.arch/arm-disassembler-options.exp: Likewise.
* gdb.arch/powerpc-disassembler-options.exp: Likewise.
* gdb.arch/s390-disassembler-options.exp: Likewise.
Bit 24 of the indexed element vcmla decode mask was incorrectly
left unset. This could cause incorrect disassembly of some
currently undefined instructions as vcmla.
Rotatation immediates were not printed correctly in the disassembly
(could print 170 and 280 instead of 180 and 270).
opcodes/
* arm-dis.c (coprocessor_opcodes): Fix vcmla mask and disassembly.
gas/
* testsuite/gas/arm/armv8_3-a-simd.s: Add vcmla tests.
* testsuite/gas/arm/armv8_3-a-simd.d: Update.
Add support for VCMLA and VCADD advanced SIMD complex number instructions.
The command line option is -march=armv8.3-a+fp16+simd for enabling all
instructions.
In arm-dis.c the formatting syntax was abused a bit to select between
0 vs 90 or 180 vs 270 or 90 vs 270 based on a bit value instead of
duplicating entries in the opcode table.
gas/
* config/tc-arm.c (do_vcmla, do_vcadd): Define.
(neon_scalar_for_vcmla): Define.
(enum operand_parse_code): Add OP_IROT1 and OP_IROT2.
(NEON_ENC_TAB): Add DDSI and QQSI variants.
(insns): Add vcmla and vcadd.
* testsuite/gas/arm/armv8_3-a-simd.d: New.
* testsuite/gas/arm/armv8_3-a-simd.s: New.
* testsuite/gas/arm/armv8_3-a-simd-bad.d: New.
* testsuite/gas/arm/armv8_3-a-simd-bad.l: New.
* testsuite/gas/arm/armv8_3-a-simd-bad.s: New.
opcodes/
* arm-dis.c (coprocessor_opcodes): Add vcmla and vcadd.
(print_insn_coprocessor): Add 'V' format for neon D or Q regs.
2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (v7m_psrs): Add MSPLIM, PSPLIM, MSPLIM_NS,
PSPLIM_NS, PRIMASK_NS, BASEPRI_NS, FAULTMASK_NS, CONTROL_NS, SP_NS and
their lowecase counterpart special registers. Write register
identifier in hex.
* testsuite/gas/arm/archv8m-cmse-msr.s: Reorganize tests per
operation, special register and then case. Use different register for
each operation. Add tests for new special registers.
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Adapt expected result
accordingly.
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise.
opcodes/
* arm-dis.c (psr_name): Use hex as case labels. Add detection for
MSPLIM, PSPLIM, MSPLIM_NS, PSPLIM_NS, PRIMASK_NS, BASEPRI_NS,
FAULTMASK_NS, CONTROL_NS and SP_NS special registers.
This patch fixes the typo "uf" in the comment. I'll push it in as the
change is obvious.
2016-06-30 Yao Qi <yao.qi@linaro.org>
* arm-dis.c (print_insn): Fix typo in comment.
This patch adds the architecture extension "+ras" to enable RAS
support. It is enabled by default for -march=armv8.2-a and available but
disabled by default for armv8-a and armv8.1-a.
gas/
* config/tc-arm.c (arm_ext_v8_2): Rename to arm_ext_ras.
(arm_ext_ras): Renamed from arm_ext_v8_2.
(insns): Update for arm_ext_v8_2 renaming.
(arm_extensions): Add "ras".
* doc/c-arm.texi (ARM Options): Add an entry for "ras".
* testsuite/gas/arm/armv8-a+ras.d: New.
* testsuite/gas/arm/armv8_2-a.d: Add explicit command line
options.
include/
* opcode/arm.h (ARM_EXT2_RAS): New. Also align preceding
entries.
(ARM_AEXT_V8_2A): Add ARM_EXT2_RAS.
opcodes/
* arm-dis.c (arm_opcodes): Replace ARM_EXT_V8_2A with
ARM_EXT_RAS in relevant entries.
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elf32-arm.c (elf32_arm_size_stubs): Use new macros
ARM_GET_SYM_BRANCH_TYPE and ARM_SET_SYM_BRANCH_TYPE to respectively get
and set branch type of a symbol.
(bfd_elf32_arm_process_before_allocation): Likewise.
(elf32_arm_relocate_section): Likewise and fix identation along the
way.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_finish_dynamic_symbol): Likewise.
(elf32_arm_swap_symbol_in): Likewise.
(elf32_arm_swap_symbol_out): Likewise.
gas/
* config/tc-arm.c (arm_adjust_symtab): Use ARM_SET_SYM_BRANCH_TYPE to
set branch type of a symbol.
gdb/
* arm-tdep.c (arm_elf_make_msymbol_special): Use
ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
include/
* arm.h (enum arm_st_branch_type): Add new ST_BRANCH_ENUM_SIZE
enumerator.
(NUM_ENUM_ARM_ST_BRANCH_TYPE_BITS): New macro.
(ENUM_ARM_ST_BRANCH_TYPE_BITMASK): Likewise.
(ARM_SYM_BRANCH_TYPE): Replace by ...
(ARM_GET_SYM_BRANCH_TYPE): This and ...
(ARM_SET_SYM_BRANCH_TYPE): This in two versions depending on whether
BFD_ASSERT is defined or not.
ld/
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Use
ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
opcodes/
* arm-dis.c (get_sym_code_type): Use ARM_GET_SYM_BRANCH_TYPE to get
branch type of a symbol.
(print_insn): Likewise.
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (arm_ext_m): Add feature bit ARM_EXT2_V8M_MAIN.
(arm_ext_v8m_main): New feature set for bit ARM_EXT2_V8M_MAIN.
(arm_ext_v8m_m_only): New feature set for instructions in ARMv8-M not
shared with a non M profile architecture.
(do_rn): New function.
(known_t32_only_insn): Check opcode against arm_ext_v8m_m_only rather
than arm_ext_v8m.
(v7m_psrs): Add ARMv8-M security extensions new special registers.
(insns): Add ARMv8-M Security Extensions instructions.
(aeabi_set_public_attributes): Use arm_ext_v8m_m_only instead of
arm_ext_v8m_m to decide the profile and the Thumb ISA.
* testsuite/gas/arm/archv8m-cmse.s: New file.
* testsuite/gas/arm/archv8m-cmse-main.s: Likewise..
* testsuite/gas/arm/archv8m-cmse-msr.s: Likewise.
* testsuite/gas/arm/any-cmse.d: Likewise.
* testsuite/gas/arm/any-cmse-main.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-base.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-main-1.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-main-2.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.
include/
* opcode/arm.h (ARM_EXT2_V8M_MAIN): new feature bit.
(ARM_AEXT2_V8M_MAIN): New architecture extension feature set.
(ARM_ARCH_V8M_MAIN): Use ARM_AEXT2_V8M_MAIN instead of ARM_AEXT2_V8M
for the high core bits.
opcodes/
* arm-dis.c (coprocessor_opcodes): Add entries for VFP ARMv8-M
Mainline Security Extensions instructions.
(thumb_opcodes): Add entries for narrow ARMv8-M Security
Extensions instructions.
(thumb32_opcodes): Add entries for wide ARMv8-M Security Extensions
instructions.
(psr_name): Add new MSP_NS and PSP_NS ARMv8-M Security Extensions
special registers.
gas/
* config/tc-arm.c (N_S_32): New.
(N_F_16_32): Likewise.
(N_SUF_32): Support N_F16.
(N_IF_32): Likewise.
(neon_dyadic_misc): Likewise.
(do_neon_cmp): Likewise.
(do_neon_cmp_inv): Likewise.
(do_neon_mul): Likewise.
(do_neon_fcmp_absolute): Likewise.
(do_neon_step): Likewise.
(do_neon_abs_neg): Likewise.
(CVT_FLAVOR_VAR): Likewise.
(do_neon_cvt_1): Likewise.
(do_neon_recip_est): Likewise.
(do_vmaxnm): Likewise.
(do_vrint_1): Likewise.
(neon_check_type): Check architecture support for FP16 extension.
(insns): Update comments.
* testsuite/gas/arm/armv8-2-fp16-simd.s: New test source.
* testsuite/gas/arm/armv8-2-fp16-simd.d: New testcase for arm mode.
* testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise for thumb mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning.d: New rejection test for
arm mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning-thumb.d: Likewise for
thumb mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning.l: New expected rejection
error file.
opcode/
* arm-dis.c (neon_opcodes): Support new FP16 instructions.
opcodes/
2016-02-24 Renlin Li <renlin.li@arm.com>
* arm-dis.c (print_insn_coprocessor): Check co-processor number for
cpd/cpd2, mcr/mcr2, mrc/mrc2, ldc/ldc2, stc/stc2.
gas/
2016-02-24 Renlin Li <renlin.li@arm.com>
* testsuite/gas/arm/copro.s: Use coprocessor other than 10, 11.
* testsuite/gas/arm/copro.d: Update.
The ARMv8.2 architecture includes the RAS extension which adds an
instruction, ESB, and a number of coprocessor registers. This patch adds
the instruction to binutils, making it available when -march=armv8.2-a
is selected. It also adds tests for the instruction and for the
coprocessor registers.
gas/
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_ext_v8_2): New.
(insns): Add "esb".
* testsuite/gas/arm/armv8_2-a.d: New.
* testsuite/gas/arm/armv8_2-a.s: New.
opcodes/
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
* arm-dis.c (arm_opcodes): Add "esb".
(thumb_opcodes): Likewise.
Change-Id: I67f3d70789db78d1c66a56c4994675f99ac15e34
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
(tag_cpu_arch_combine): Adjust comment in v4t_plus_v6_m with regards
to merging with ARMv8-M Baseline.
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Baseline Tag_CPU_arch
value.
gas/
* config/tc-arm.c (arm_ext_v6t2_v8m): New feature for instructions
shared between ARMv6T2 and ARMv8-M.
(move_or_literal_pool): Check mov.w/mvn and movw availability against
arm_ext_v6t2 and arm_ext_v6t2_v8m respectively instead of checking
arm_arch_t2.
(do_t_branch): Error out for wide conditional branch instructions if
targetting ARMv8-M Baseline.
(non_v6t2_wide_only_insn): Add the logic for new wide-only instructions
in ARMv8-M Baseline.
(wide_insn_ok): New function.
(md_assemble): Use wide_insn_ok instead of non_v6t2_wide_only_insn and
adapt error message for unsupported wide instruction to ARMv8-M
Baseline.
(insns): Reorganize instructions shared by ARMv8-M Baseline and
ARMv6t2 architecture.
(arm_cpus): Set feature bit ARM_EXT2_V6T2_V8M for marvell-pj4 and
marvell-whitney cores.
(arm_archs): Define armv8-m.base architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_BASE architecture version.
(aeabi_set_public_attributes): Add logic to set Tag_CPU_arch to 17 for
ARMv8-M Mainline. Set Tag_DIV_use for ARMv8-M Baseline as well.
gas/testsuite/
* gas/arm/archv8m-base.d: New file.
* gas/arm/attr-march-armv8m.base.d: Likewise.
* gas/arm/armv8m.base-idiv.d: Likewise.
* gas/arm/any-armv8m.d: Adapt to deal with ARMv8-M Baseline.
include/elf/
* arm.h (TAG_CPU_ARCH_V8M_BASE): Declare.
include/opcode/
* arm.h (ARM_EXT2_V6T2_V8M): New extension bit.
(ARM_AEXT2_V8A): New architecture extension bitfield.
(ARM_AEXT2_V8_1A): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_AEXT_V8M_BASE): New architecture extension bitfield.
(ARM_AEXT2_V8M): Add extension bit ARM_EXT2_V6T2_V8M.
(ARM_ARCH_V6T2): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield.
(ARM_ARCH_V6KT2): Likewise.
(ARM_ARCH_V6ZT2): Likewise.
(ARM_ARCH_V6KZT2): Likewise.
(ARM_ARCH_V7): Likewise.
(ARM_ARCH_V7A): Likewise.
(ARM_ARCH_V7VE): Likewise.
(ARM_ARCH_V7R): Likewise.
(ARM_ARCH_V7M): Likewise.
(ARM_ARCH_V7EM): Likewise.
(ARM_ARCH_V8A): Likewise.
(ARM_ARCH_V8M_BASE): New architecture bitfield.
(ARM_ARCH_THUMB2): Include instructions shared by ARMv6t2 and ARMv8-M.
(ARM_ARCH_V7A_SEC): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield and reindent.
(ARM_ARCH_V7A_MP_SEC): Likewise.
(ARM_ARCH_V7R_IDIV): Likewise.
(ARM_ARCH_V8A_FP): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_ARCH_V8A_SIMD): Likewise.
(ARM_ARCH_V8A_CRYPTOV1): Likewise.
opcodes/
* arm-dis.c (arm_opcodes): Guard movw, movt cbz, cbnz, clrex, ldrex,
ldrexb, ldrexh, strex, strexb, strexh shared by ARMv6T2 and ARMv8-M by
ARM_EXT2_V6T2_V8M instead of ARM_EXT_V6T2.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
(tag_cpu_arch_combine): Adjust v4t_plus_v6_m and comb array to account
for new TAG_CPU_ARCH_V4T_PLUS_V6_M value. Deal with NULL values in
comb array.
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Mainline Tag_CPU_arch
value.
(arm_attr_tag_THUMB_ISA_use): Add ARMv8-M Mainline Tag_THUMB_ISA_use
value.
gas/
* config/tc-arm.c (arm_ext_m): Include ARMv8-M.
(arm_ext_v8m): New feature for ARMv8-M.
(arm_ext_atomics): New feature for ARMv8 atomics.
(do_tt): New encoding function for TT* instructions.
(insns): Add new entries for ARMv8-M specific instructions and
reorganize the ones shared by ARMv8-M Mainline and ARMv8-A.
(arm_archs): Define armv8-m.main architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_MAIN architecture version and
clarify the ordering rule.
(aeabi_set_public_attributes): Use TAG_CPU_ARCH_* macro to refer to
Tag_CPU_arch values for ARMv7e-M detection. Add logic to keep setting
Tag_CPU_arch to ARMv8-A for -march=all. Also set Tag_CPU_arch_profile
to 'A' if extension bit for atomic instructions is set, unless it is
ARMv8-M. Set Tag_THUMB_ISA_use to 3 for ARMv8-M. Set Tag_DIV_use to 0
for ARMv8-M Mainline.
gas/testsuite/
* gas/arm/archv8m.s: New file.
* gas/arm/archv8m-main.d: Likewise.
* gas/arm/attr-march-armv8m.main.d: Likewise.
* gas/arm/any-armv8m.s: Likewise.
* gas/arm/any-armv8m.d: Likewise.
include/elf/
* arm.h (TAG_CPU_ARCH_V8M_MAIN): Declare.
(MAX_TAG_CPU_ARCH): Define to TAG_CPU_ARCH_V8M_MAIN.
(TAG_CPU_ARCH_V4T_PLUS_V6_M): Define to unused value 15.
include/opcode/
* arm.h (ARM_EXT2_ATOMICS): New extension bit.
(ARM_EXT2_V8M): Likewise.
(ARM_EXT_V8): Adjust comment with regards to atomics and remove
mention of legacy use for that bit.
(ARM_AEXT2_V8_1A): New architecture extension bitfield.
(ARM_AEXT2_V8_2A): Likewise.
(ARM_AEXT_V8M_MAIN): Likewise.
(ARM_AEXT2_V8M): Likewise.
(ARM_ARCH_V8A): Use ARM_EXT2_ATOMICS for features in second bitfield.
(ARM_ARCH_V8_1A): Likewise with ARM_AEXT2_V8_1A.
(ARM_ARCH_V8_2A): Likewise with ARM_AEXT2_V8_2A.
(ARM_ARCH_V8M_MAIN): New architecture feature bitfield.
(ARM_ARCH_V8A_FP): Use ARM_EXT2_ATOMICS for features in second bitfield
and reindent.
(ARM_ARCH_V8A_SIMD): Likewise.
(ARM_ARCH_V8A_CRYPTOV1): Likewise.
(ARM_ARCH_V8_1A_FP): Use ARM_AEXT2_V8_1A to set second bitfield of
feature bits.
(ARM_ARCH_V8_1A_SIMD): Likewise.
(ARM_ARCH_V8_1A_CRYPTOV1): Likewise.
opcodes/
* arm-dis.c (arm_opcodes): Guard lda, ldab, ldaex, ldaexb, ldaexh, stl,
stlb, stlh, stlex, stlexb and stlexh by ARM_EXT2_ATOMICS instead of
ARM_EXT_V8.
(thumb32_opcodes): Add entries for wide ARMv8-M instructions.
opcodes * arm-dis.c (print_insn_arm): Disassembling for all targets V6
and higher with ARM instruction set will now mark the 26-bit
versions of teq,tst,cmn and cmp as UNPREDICTABLE.
(arm_opcodes): Fix for unpredictable nop being recognized as a teq.
test * gas/arm/nops.d: New.
* gas/arm/nops.s: New.
* gas/arm/inst.d: Changed expectation file for 26-bit teq,
tst, cmn and cmp.
opcodes * arm-dis.c (print_insn_coprocessor): Added support for quarter
float bitfield format.
(coprocessor_opcodes): Changed VFP vmov reg,immediate to use new
quarter float bitfield format.
tests * gas/arm/vfpv3-const-conv.d: Update expected result due to change
of comment for vmov reg,immediate with VFP coprocessor.
2015-04-15 Renlin Li <renlin.li@arm.com>
opcodes/:
* arm-dis.c (thumb32_opcodes): Define 'D' format control code,
use it for ssat and ssat16.
(print_insn_thumb32): Add handle case for 'D' control code.
gas/testsuite/:
* gas/arm/arch7em.d: Adjust required ssat and ssat16 immediate field.
* gas/arm/thumb32.d: Likewise.
2015-03-03 Jiong Wang <jiong.wang@arm.com>
opcode/
* arm-dis.c (arm_symbol_is_valid): Skip ARM private symbols.
binutils/testsuite/
* binutils-all/arm/rvct_symbol.s: New testcase.
* binutils-all/arm/objdump.exp: Run it.
2014-08-21 Nathan Sidwell <nathan@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
opcodes/
* arm-dis.c (print_arm_address): Negate the GPR-relative offset
returned if the U bit is set.
2014-08-21 Paul Brook <paul@codesourcery.com>
gas/testsuite/
* gas/arm/arch7a-mp.d: Adjust according to `print_arm_address'
offset fix.
* gas/arm/arch7r-mp.d: Likewise.
* config/tc-arm.c (T16_32_TAB): Add _udf.
(do_t_udf): New function.
(insns): Add "udf".
* gas/arm/udf-bad.s: New file.
* gas/arm/udf-bad.d: New file.
* gas/arm/udf-bad.l: New file.
* gas/arm/udf.s: New file.
* gas/arm/udf.d: New file.
* gas/arm/udf.l: New file.
* arm-dis.c (arm_opcodes): Add udf.
(thumb_opcodes): Use "udf" mnemonic rather than UNDEFINED_INSTRUCTION.
(thumb32_opcodes): Add udf.w.
(print_insn_thumb32): Handle %H as the thumb32_opcodes comment says.
* arm-dis.c: Use preferred form of vrint instruction variants
for disassembly.
2012-10-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* gas/arm/armv8-a+fp.d: Use preferred form of vrint instruction
variants for disassembly.
* gas/arm/armv8-a+fp.s: Likewise.
* gas/arm/armv8-a+simd.d: Likewise.
* gas/arm/armv8-a+simd.s: Likewise.
