Replace it with for_each_thread with pid filtering. We can remove
lynx_delete_thread_callback and pass remove_thread directly.
I can't build/test this change, but it should be obvious enough.
gdb/gdbserver/ChangeLog:
* lynx.low (lynx_delete_thread_callback): Remove.
(lynx_mourn): Use for_each_thread.
Replace with for_each_thread with pid filtering.
regcache_invalidate_one is not longer needed, as it was only used to
filter the pid. We can call regcache_invalidate_thread directly.
gdb/gdbserver/ChangeLog:
* regcache.c (regcache_invalidate_one): Remove.
(regcache_invalidate_pid): use for_each_thread.
This is a partial fix for the gold testsuite failures documented in
PR 21090. The use of -fpie triggers some mov-to-lea optimizations that
are not compatible with incremental linking, so those optimizations need
to be disabled. We also diagnose the attempt to use -pie with incremental
linking, and force -no-pie for the incremental tests in case the build has
been configured to have GCC pass -pie all the time.
We still have a problem where compiling with -fpie results in some GOT
entries even when linking with -no-pie. This combination still causes test
failures because we are not updating the GOT entries in an incremental update
link.
gold/
PR gold/21090
* incremental.cc (Sized_relobj_incr::do_relocate): Fix comment.
* options.cc (General_options::finalize): Disallow -pie with
incremental linking.
* x86_64.cc (Target_x86_64::Scan::local): Don't do mov-to-lea
or callq-to-direct optimizations for incremental links.
(Target_x86_64::Scan::global): Likewise.
(Target_x86_64::Relocate::relocate): Likewise.
* testsuite/Makefile.am (incremental_test): Force -no-pie.
(incremental_test_2): Likewise.
(incremental_test_3): Likewise.
(incremental_test_4): Likewise.
(incremental_test_5): Likewise.
(incremental_test_6): Likewise.
(incremental_copy_test): Likewise.
(incremental_common_test_1): Likewise.
(incremental_comdat_test_1): Likewise.
* testsuite/Makefile.in: Regenerate.
With the new compiler, we're running out of patch space for the .eh_frame
section. To workaround that issue, we compile the before and after versions
both with no unwind tables.
gold/
PR gold/22309
* testsuite/Makefile.am (two_file_test_1_v1_ndebug.o): Compile with
no EH information.
(two_file_test_1_ndebug.o): Likewise.
* testsuite/Makefile.in: Regenerate.
* testsuite/two_file_test_1.cc: Touch to force recompilation with new
flags.
* testsuite/two_file_test_1_v1.cc: Likewise.
The purpose of this concept is to turn the load of debugging
information off, either globally (via the '--readnever' option), or
objfile-specific. The implementation proposed here is an extension of
the patch distributed with Fedora GDB; looking at the Fedora patch
itself and the history, one can see some reasons why it was never
resubmitted:
- The patch appears to have been introduced as a workaround, at
least initially;
- The patch is far from perfect, as it simply shunts the load of
DWARF debugging information, without really worrying about the
other debug format.
- Who really does non-symbolic debugging anyways?
One use of this feature is when a user simply wants to do the
following sequence: attach, dump core, detach. Loading the debugging
information in this case is an unnecessary cause of delay.
This patch expands the version shipped with Fedora GDB in order to
make the feature available for all the debuginfo backends, not only
for DWARF. It also implements a per-objfile flag which can be
activated by using the "-readnever" command when using the
'add-symbol-file' or 'symbol-file' commands.
It's also worth mentioning that this patch tests whether GDB correctly
fails to initialize if both '--readnow' and '--readnever' options are
passed.
Tested on the BuildBot.
gdb/ChangeLog:
2017-12-01 Andrew Cagney <cagney@redhat.com>
Joel Brobecker <brobecker@adacore.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0: Mention new '--readnever'
feature.
* coffread.c (coff_symfile_read): Do not map over sections with
'coff_locate_sections' if readnever is on.
* dwarf2read.c (dwarf2_has_info): Return 0 if
readnever is on.
* elfread.c (elf_symfile_read): Do not map over sections with
'elf_locate_sections' if readnever is on.
* main.c (validate_readnow_readnever): New function.
(captured_main_1): Add support for --readnever.
(print_gdb_help): Document --readnever.
* objfile-flags.h (enum objfile_flag) <OBJF_READNEVER>: New
flag.
* symfile.c (readnever_symbol_files): New global.
(symbol_file_add_with_addrs): Set 'OBJF_READNEVER' when
'READNEVER_SYMBOL_FILES' is set.
(validate_readnow_readnever): New function.
(symbol_file_command): Handle '-readnever' option.
Call 'validate_readnow_readnever'.
(add_symbol_file_command): Handle '-readnever' option.
Call 'validate_readnow_readnever'.
(_initialize_symfile): Document new '-readnever' option for
both 'symbol-file' and 'add-symbol-file' commands.
* top.h (readnever_symbol_files): New extern global.
* xcoffread.c (xcoff_initial_scan): Do not read debug
information if readnever is on.
gdb/doc/ChangeLog:
2017-12-01 Andrew Cagney <cagney@redhat.com>
Joel Brobecker <brobecker@adacore.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (File Options): Document --readnever.
(Commands to Specify Files): Likewise, for 'symbol-file' and
'add-symbol-file'.
gdb/testsuite/ChangeLog:
2017-12-01 Joel Brobecker <brobecker@adacore.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/readnever.c, gdb.base/readnever.exp: New files.
This is a bug that's been detected while doing the readnever work.
If you use 'symbol-file' or 'add-symbol-file', the position of each
argument passed to the command matters. This means that if you do:
(gdb) symbol-file -readnow /foo/bar
The symbol file specified will (correctly) have all of its symbols
read by GDB (because of the -readnow flag). However, if you do:
(gdb) symbol-file /foo/bar -readnow
GDB will silently ignore the -readnow flag, because it was specified
after the filename. This is not a good thing to do and may confuse
the user.
To address that, I've modified the argument parsing mechanisms of
symbol_file_command and add_symbol_file_command to be
"position-independent". I have also added one error call at the end
of add_symbol_file_command's argument parsing logic, which now clearly
complains if no filename has been specified. Both commands now
support the "--" option to stop argument processing.
This patch provides a testcase for both commands, in order to make
sure that the argument order does not matter. It has been
regression-tested on BuildBot.
gdb/ChangeLog:
2017-12-01 Sergio Durigan Junior <sergiodj@redhat.com>
* symfile.c (symbol_file_command): Call
'symbol_file_add_main_1' only after processing all command
line options.
(add_symbol_file_command): Modify logic to make arguments
position-independent.
gdb/testsuite/ChangeLog:
2017-12-01 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/relocate.exp: Add tests to guarantee that arguments
to 'symbol-file' and 'add-symbol-file' can be
position-independent.
One of our users reported that trying to print the following expression,
caused GDB to SEGV:
(gdb) print some_package.some_type (val)
In this particular instance, the crash occurred inside ada_args_match
because it is given a NULL "func", leading to the SEGV because of:
struct type *func_type = SYMBOL_TYPE (func);
This NULL symbol comes from a list of symbols which was given to
ada_resolve_function (parameter called "syms") which then iterates
over each of them to discard the ones that don't match the actuals:
for (k = 0; k < nsyms; k += 1)
{
struct type *type = ada_check_typedef (SYMBOL_TYPE (syms[k].symbol));
if (ada_args_match (syms[k].symbol, args, nargs)
&& (fallback || return_match (type, context_type)))
[...]
}
What's really interesting is that, when entering the block above for
the first time, all entries in SYMS have a valid (non-NULL) symbol.
However, once we return from the call to ada_check_typedef, the first
entry of our SYMS table gets set to all zeros:
(gdb) p syms[0]
$2 = {symbol = 0x0, block = 0x0}
Hence the call to ada_args_match with a NULL symbol, and the ensuing
SEGV.
To find out why this happen, we need to step back a little and look
at how syms was allocated. This list of symbols comes from a symbol
lookup, which means ada_lookup_symbol_list_worker. We have our first
hint when we look at the function's documentation and see:
This vector is transient---good only to the next call of
ada_lookup_symbol_list.
Implementation-wise, this is done by using a static global obstack,
which we just re-initialize each time ada_lookup_symbol_list_worker
gets called:
obstack_free (&symbol_list_obstack, NULL);
obstack_init (&symbol_list_obstack);
This property was probably established in order to facilitate the use
of the returned vector, since the users of that function would not have
to worry about releasing that memory when no longer needed. However,
I found during this investigation that it is all to easy to indirectly
trigger another symbol lookup while still using the results of a previous
lookup.
In our particular case, there is the call to ada_check_typedef, which
leads to check_typedef. As it happens, my first symbol had a type which
was a typedef to a stub type, so check_typedef calls lookup_symbol to
find the non-stub version. This in turn eventually leads us back to
ada_lookup_symbol_list_worker, where the first thing it does is free
the memory area when our list of symbols have been residing and then
recreates a new one. in other words, SYMS then becomes a dangling
pointer!
This patch fixes the issue by having ada_lookup_symbol_list_worker
return a copy of the list of symbols, with the responsibility of
deallocating that list now transfered to the users of that list.
More generally speaking, it is absolutely amazing that we haven't seen
consequences of this issue before. This can happen fairly frequently.
For instance, I found that ada-exp.y::write_var_or_type calls
ada_lookup_symbol_list, and then, while processing that list, calls
select_possible_type_sym, which leads to ada_prefer_type, eventually
leading to ada_check_typedef again (via eg. ada_is_array_descriptor_type).
Even more amazing is the fact that, while I was able to produce multiple
scenarios where the corruption occurs, none of them leads to incorrect
behavior at the user level. In other words, it requires a very precise
set of conditions for the corruption to become user-visible, and
despite having a megalarge program where the crash occured, using that
as a template for creating a reproducer did not work (pb goes away).
This is why this patch does not come with a reproducer. On the other hand,
this should not be a problem in terms of testing coverage, as the changes
are made in common areas which, at least for the most part, are routinely
exercised during testing.
gdb/ChangeLog:
* ada-lang.c (symbol_list_obstack): Delete.
(resolve_subexp): Make sure "candidates" gets xfree'ed.
(ada_lookup_symbol_list_worker): Remove the limitation that
the result is only good until the next call, now making it
the responsibility of the caller to free the result when no
longer needed. Adjust the function's intro comment accordingly.
(ada_lookup_symbol_list): Adjust the function's intro comment.
(ada_iterate_over_symbols): Make sure "results" gets xfree'ed.
(ada_lookup_encoded_symbol, get_var_value): Likewise.
(_initialize_ada_language): Remove symbol_list_obstack
initialization.
* ada-exp.y (block_lookup): Make sure "syms" gets xfree'ed.
(write_var_or_type, write_name_assoc): Likewise.
Tested on x86_64-linux.
The problem is that while the command line isn't trivially empty,
it contains no input files. As gold tries to configure the number
of threads to use based on the number of input files, this causes
the assertion failure above. Fix this problem by making the logic
in gold.cc more robust and also adding a better error message
about --start-lib to options.cc.
gold/
PR gold/22406
* gold.cc (queue_initial_tasks) Check for number of real input files.
* options.cc (Command_line::process) Check for unterminated --start-lib
options.
* testsuite/Makefile.am: Add new test script.
* testsuite/Makefile.in: Regenerate.
* testsuite/check_empty_command_lines.sh: New test script.
If a shared library contains an undefined symbol and LTO adds
a new reference to that same undefined symbol, the reference in the new
object added by the plugin would not trigger a rescan of the archive
containing the symbol.
2017-11-17 Stephen Crane <sjc@immunant.com>
gold/
PR gold/22448
* symtab.cc (Symbol_table::add_from_object): Only rescan for
undefined symbols in regular, not dynamic, objects.
The purpose of this concept is to turn the load of debugging
information off, either globally (via the '--readnever' option), or
objfile-specific. The implementation proposed here is an extension of
the patch distributed with Fedora GDB; looking at the Fedora patch
itself and the history, one can see some reasons why it was never
resubmitted:
- The patch appears to have been introduced as a workaround, at
least initially;
- The patch is far from perfect, as it simply shunts the load of
DWARF debugging information, without really worrying about the
other debug format.
- Who really does non-symbolic debugging anyways?
One use of this feature is when a user simply wants to do the
following sequence: attach, dump core, detach. Loading the debugging
information in this case is an unnecessary cause of delay.
This patch expands the version shipped with Fedora GDB in order to
make the feature available for all the debuginfo backends, not only
for DWARF. It also implements a per-objfile flag which can be
activated by using the "-readnever" command when using the
'add-symbol-file' or 'symbol-file' commands.
It's also worth mentioning that this patch tests whether GDB correctly
fails to initialize if both '--readnow' and '--readnever' options are
passed.
Tested on the BuildBot.
gdb/ChangeLog:
2017-12-01 Andrew Cagney <cagney@redhat.com>
Joel Brobecker <brobecker@adacore.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0: Mention new '--readnever'
feature.
* coffread.c (coff_symfile_read): Do not map over sections with
'coff_locate_sections' if readnever is on.
* dwarf2read.c (dwarf2_has_info): Return 0 if
readnever is on.
* elfread.c (elf_symfile_read): Do not map over sections with
'elf_locate_sections' if readnever is on.
* main.c (validate_readnow_readnever): New function.
(captured_main_1): Add support for --readnever.
(print_gdb_help): Document --readnever.
* objfile-flags.h (enum objfile_flag) <OBJF_READNEVER>: New
flag.
* symfile.c (readnever_symbol_files): New global.
(symbol_file_add_with_addrs): Set 'OBJF_READNEVER' when
'READNEVER_SYMBOL_FILES' is set.
(validate_readnow_readnever): New function.
(symbol_file_command): Handle '-readnever' option.
Call 'validate_readnow_readnever'.
(add_symbol_file_command): Handle '-readnever' option.
Call 'validate_readnow_readnever'.
(_initialize_symfile): Document new '-readnever' option for
both 'symbol-file' and 'add-symbol-file' commands.
* top.h (readnever_symbol_files): New extern global.
* xcoffread.c (xcoff_initial_scan): Do not read debug
information if readnever is on.
gdb/doc/ChangeLog:
2017-12-01 Andrew Cagney <cagney@redhat.com>
Joel Brobecker <brobecker@adacore.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (File Options): Document --readnever.
(Commands to Specify Files): Likewise, for 'symbol-file' and
'add-symbol-file'.
gdb/testsuite/ChangeLog:
2017-12-01 Joel Brobecker <brobecker@adacore.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/readnever.c, gdb.base/readnever.exp: New files.
On irc, Pedro pointed out that dependencies for objects in
subdirectories didn't seem to be working.
The bug was that the "-include" for .deps files was using the wrong file
name for subdirectory objects; e.g., for cli/cli-decode.o it was trying
to open .deps/cli/cli-decode.o, whereas the correct file is
cli/.deps/cli-decode.o.
This patch changes how the dep files are found. Tested by touching a
source file and rebuilding cli/cli-decode.o.
2017-12-01 Tom Tromey <tom@tromey.com>
* Makefile.in (all_deps_files): New variable.
Include .Po files using all_deps_files.
The copyright header in most of GDB files were changed from mail address
to the URL in the conversion to GPLv3 in Aug 2007. However, some files
still use mail address instead of the URL. This patch fixes them.
gdb/testsuite:
2017-12-01 Yao Qi <yao.qi@linaro.org>
* gdb.arch/aarch64-atomic-inst.exp: Replace mail address with
the URL in copyright header.
* gdb.arch/aarch64-fp.exp: Likewise.
* gdb.arch/ppc64-atomic-inst.exp: Likewise.
* gdb.arch/ppc64-isa207-atomic-inst.exp: Likewise.
* gdb.base/expand-psymtabs.exp: Likewise.
* gdb.cp/expand-psymtabs-cxx.exp: Likewise.
* gdb.fortran/common-block.exp: Likewise.
* gdb.fortran/common-block.f90: Likewise.
* gdb.fortran/logical.exp: Likewise.
* gdb.fortran/vla-datatypes.f90: Likewise.
* gdb.fortran/vla-sub.f90: Likewise.
This adds the test I was using when testing 60d67dc8.
* testsuite/ld-elfweak/alias.c,
* testsuite/ld-elfweak/alias.dat,
* testsuite/ld-elfweak/aliasmain.c,
* testsuite/ld-elfweak/weakref1.c,
* testsuite/ld-elfweak/weakref2.c: New test.
* testsuite/ld-elfweak/elfweak.exp: Run it. Don't return on fails,
attempt other tests.
In early October, HJ Lu added support for a number of targets to "Dump
dynamic relocation in read-only section with minfo". This extends
that support to more targets, displays the symbol involved, and splits
the existing function that sets TEXTREL into a "readonly_dynrelocs"
and "maybe_set_textrel" function. I'll need "readonly_dynrelocs" if I
ever get around to fixing "pr22374 function pointer initialization"
fails.
am33_2.0, arc, bfin, hppa64, mn10300, and nios2 fail to mark a binary
needing text relocations with DT_TEXTREL. That's not good. xtensa also
fails to do so but complains about "dangerous relocation: dynamic
relocation in read-only section" so I reckon that is fine and have
marked the test as an xfail. The other targets need maintainer
attention.
Curiously, the map file dump wasn't added for x86, so the map test
currently fail on x86. It also fails on alpha, am33_2.0, arc, bfin,
hppa64, ia64, m68k, mips, mn10300, nios2, score and vax. cris
complains with "tmpdir/textrel.o, section .rodata: relocation
R_CRIS_32 should not be used in a shared object; recompile with -fPIC"
so I've marked it as an xfail.
bfd/
* elf32-hppa.c (maybe_set_textrel): Print symbol for map file output.
* elf32-ppc.c (maybe_set_textrel): Likewise.
* elf64-ppc.c (maybe_set_textrel): Likewise.
* elf32-arm.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(elf32_arm_readonly_dynrelocs): ..this.
* elf32-lm32.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-m32r.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-metag.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-nds32.c: Delete unnecessary forward declarations.
(readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-or1k.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-s390.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-sh.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-tic6x.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(elf32_tic6x_readonly_dynrelocs): ..this.
* elf32-tilepro.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf64-s390.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfnn-aarch64.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(aarch64_readonly_readonly_dynrelocs): ..this.
* elfnn-riscv.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfxx-sparc.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfxx-tilegx.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
ld/
* testsuite/ld-elf/shared.exp: Run new textrel tests.
* testsuite/ld-elf/textrel.map: New file.
* testsuite/ld-elf/textrel.rd: New file.
* testsuite/ld-elf/textrel.s: New file.
* testsuite/ld-elf/textrel.warn: New file.
This patch introduces a testcase that exercises a scenario
which used to trigger an internal-error, but no longer does:
Consider the following array:
type Small is new Integer range Ident (1) .. Ident (10);
type Table is array (1 .. 3) of Small;
A1 : Table := (3, 5, 8);
The particularity of this array is that the type of each element
is a range type whose bounds are dynamic, since they depend on
the value returned by Ident (1) and Ident (10). Trying to apply
the repeat operator ('@') on one of its elements used to yield
an internal error:
(gdb) p a1(1)@3
$1 =
/[...]/gdbtypes.c:4512: internal-error:
copy_type: Assertion `TYPE_OBJFILE_OWNED (type)' failed.
Although the issue no longer appears, the testcase is still
interesting to have.
gdb/testsuite/ChangeLog:
* gdb.ada/repeat_dyn: New testcase.
Tested on x86_64-linux with clean results.
The addresses of erratum stubs can be changed by relaxation passes, and
need to be updated.
gold/
PR gold/20765
* aarch64.cc (Aarch64_relobj::update_erratum_address): New method.
(AArch64_relobj::scan_errata): Update addresses in stub table after
relaxation pass.
I checked over the results of applying --fix-cortex-a53-843419 to
a very large program (gitit) with two stub tables and thousands
of erratum fixes. I noticed that all the erratum_stubs were being
created but about 1/3 of them were being skipped over by
fix_errata_and_relocate_erratum_stubs(). By skipped over I mean
no branch relocation or adrp -> adr transformation was applied to
the erratum address, leaving the erratum_stub unreachable, and
with a branch with a 0 immediate.
The root cause of the skipped over erratum_stubs is
Erratum_stub::invalidate_erratum_stub() that is used to set
relobj_ to NULL when an erratum_stub has been processed.
Unfortunately relobj_ is used in operator<() so altering relobj
makes the results from erratum_stubs_.lower_bound() as used in
find_erratum_stubs_for_input_section() unreliable.
2017-11-30 Peter Smith <peter.smith@linaro.org>
Cary Coutant <ccoutant@gmail.com>
gold/
PR gold/20765
* aarch64.cc (Erratum_stub::invalidate_erratum_stub): Use erratum_insn_
instead of relobj_ to invalidate the stub.
(Erratum_stub::is_invalidated_erratum_stub): Likewise.
The fix for PR21868 (an internal error when --fix-cortex-a53-843419
is applied) has a small mistake in it. When the stub_owner section
needs an erratum fix an incorrect address for the stubs for the section
is given to relocate_erratum_stub. If we are lucky we will get a segfault;
if we aren't, an incorrect patch or data corruption is possible.
The error is visible in PR21868, but the side-effects aren't fatal.
gold/
PR gold/22233
* aarch64.cc (AArch64_relobj::fix_errata_and_relocate_erratum_stubs):
Fix calculation of stub address.
This cleans up yet more craziness with non_got_ref.
PR 22533
* elf32-hppa.c (elf32_hppa_copy_indirect_symbol): Don't do anything
special with non_got_ref for weak aliases.
(elf32_hppa_check_relocs): Tweak setting of non_got_ref.
(elf32_hppa_adjust_dynamic_symbol): When initialising weak aliases,
don't uselessly copy non_got_ref. Clear dyn_relocs instead if
strong symbol is allocated in dynbss. Tidy comments.
(elf32_hppa_relocate_section): Comment fix.
* elf32-ppc.c (ppc_elf_copy_indirect_symbol): Don't do anything
special with non_got_ref for weak aliases.
(ppc_elf_adjust_dynamic_symbol): When initialising weak aliases,
don't uselessly copy non_got_ref. Clear dyn_relocs instead if
strong symbol is allocated in dynbss. Tidy comments.
* elf64-ppc.c (ppc64_elf_copy_indirect_symbol): Don't do anything
special with non_got_ref for weak aliases.
(ppc64_elf_adjust_dynamic_symbol): When initialising weak aliases,
don't uselessly copy non_got_ref. Clear dyn_relocs instead if
strong symbol is allocated in dynbss. Tidy comments.
Now that the ppc64 breakpoint regression is fixed, running the
gdb.cell test suite showed a few more test case problems, caused
by tests that haven't been updated to adapt to GDB changes.
gdb/testsuite/ChangeLog:
2017-11-30 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.cell/gcore.exp: Fix typo when setting spu_bin.
Update for changed thread numbering.
* gdb.cell/bt.exp: Update for changed GDB output.
local-board.exp was introduced recently, containing the code required to
force the gdbserver boards to be non-remote (from the DejaGNU point of
view). Other board files use the same trick of forcing isremote to 0.
Instead of doing it by hand in each file, include local-board.exp.
gdb/testsuite/ChangeLog:
* boards/cc-with-tweaks.exp: Include local-board.exp instead of
setting isremote by hand.
* boards/dwarf4-gdb-index.exp: Likewise.
* boards/fission.exp: Likewise.
* boards/stabs.exp: Likewise.
gdb.linespec/cpls-ops.exp is currently failing on x86-64 -m32 and other
32-bit ports:
b test_op_new::operator new(unsigned int) FAIL: gdb.linespec/cpls-ops.exp: operator-new: tab complete "b test_op_new::operator" (timeout)
^CQuit
(gdb) complete b test_op_new::operator
b test_op_new::operator new(unsigned int)
(gdb) FAIL: gdb.linespec/cpls-ops.exp: operator-new: cmd complete "b test_op_new::operator"
The problem is simply that the testcase incorrectly assumes that
size_t is "unsigned long".
Fix this by extracting the right type with the "ptype" command.
gdb/testsuite/ChangeLog:
2017-11-30 Pedro Alves <palves@redhat.com>
* gdb.linespec/cpls-ops.exp
(check_explicit_skips_function_argument): Extract the underlying
type of size_t instead of hardcoding it.
This is the previously mentioned patch to get rid of
unstructured/ioctl-based procfs support in procfs.c. Given that support
for structured procfs was introduced in Solaris 2.6 back in 1997 and
we're just removing support for Solaris < 10, there's no point in
carrying that baggage (and tons of support for IRIX and OSF/1 as well)
around any longer.
Most of the patch should be straightforward (removing support for
!NEW_PROC_API, non-Solaris OSes and pre-Solaris 10 quirks).
Only a few points need explanations:
* <sys/syscall.h> was already included unconditionally in most places,
so there's no need to have guards in a few remaining ones.
* configure.host already obsoletes i?86-*-sysv4.2, i?86-*-sysv5, so
NEW_PROC_API detection for those in configure.ac can go.
* I'm still including <sys/procfs.h> with #define _STRUCTURED_PROC 1.
Theoretically, it would be better to include <procfs.h> on Solaris
(which includes that define), but that breaks the build over
<procfs.h> vs. gdb's "procfs.h", and doesn't exist on Linux.
* I've regenerated syscall_table[] in proc-events.c with a small script
from Solaris 10, 11.3, 11.4 <sys/syscall.h>, so there should be no
traces of older Solaris versions and other OSes left.
* prsysent_t and DYNAMIC_SYSCALLS was only used for AIX 5, but AIX
doesn't use procfs.c any longer, so all related code can go.
The patch was generated with diff -w so one can easier see changes
without being distracted by simple reindentations.
So far, it has only been compiled and smoke-tested on
amd64-pc-solaris2.1[01], sparcv9-sun-solaris2.1[01], and
x86_64-pc-linux-gnu. Certainly needs more testing (Solaris 11.3
vs. 11.4, 32-bit gdb, testsuite once I've figured out what's wrong on
Solaris 10 etc.), but it's enough to get a first impression how much
cleanup is possible here.
* configure.ac Don't check for sys/fault.h, sys/syscall.h,
sys/proc.h.
(NEW_PROC_API): Remove.
(prsysent_t, pr_sigset_t, pr_sigaction64_t, pr_siginfo64_t):
Likewise.
* common/common.m4 (GDB_AC_COMMON): Don't check for sys/syscall.h.
* configure: Regenerate.
* config.in: Regenerate.
* gdbserver/configure: Regenerate.
* gdbserver/config.in: Regenerate.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Remove
NEW_PROC_API test.
* sparc-sol2-nat.c (_initialize_sparc_sol2_nat): Likewise.
* linux-btrace.c: Remove HAVE_SYS_SYSCALL_H test.
* proc-api.c: Remove !NEW_PROC_API support.
Remove HAVE_SYS_PROC_H and HAVE_SYS_USER_H tests.
Remove tests for macros always defined on Solaris.
* proc-events.c: Remove !NEW_PROC_API support.
Remove Remove HAVE_SYS_SYSCALL_H, HAVE_SYS_PROC_H and
HAVE_SYS_USER_H tests.
(init_syscall_table): Remove non-Solaris syscalls.
Remove tests for syscalls present on all Solaris versions.
Add missing Solaris 10+ syscalls.
(signal_table): Remove non-Solaris signals.
Remove tests for signals present on all Solaris versions.
(fault_table): Remove non-Solaris faults.
Remove tests for faults present on all Solaris versions.
* proc-flags.c: Remove !NEW_PROC_API support.
(pr_flag_table): Remove non-Solaris and pre-Solaris 7 comments.
Remove non-Solaris flags.
* proc-why.c: Remove !NEW_PROC_API support.
(pr_why_table): Remove meaningless comments.
Remove tests for reasons present on all Solaris versions.
Remove OSF/1 cases.
(proc_prettyfprint_why): Likewise.
* procfs.c: Remove !NEW_PROC_API and DYNAMIC_SYSCALLS support.
Remove HAVE_SYS_FAULT_H and HAVE_SYS_SYSCALL_H tests.
Remove WA_READ test, IRIX watchpoint support.
(gdb_sigset_t, gdb_sigaction_t, gdb_siginfo_t): Replace by base
types. Change users.
(gdb_praddset, gdb_prdelset, gdb_premptysysset, gdb_praddsysset)
(gdb_prdelset, gdb_pr_issyssetmember): Replace by base macros.
Change callers.
Remove CTL_PROC_NAME_FMT tests.
(gdb_prstatus_t, gdb_lwpstatus_t): Replace by base types. Change
users.
(sysset_t_size): Remove. Use sizeof (sysset_t) in callers.
Remove PROCFS_DONT_PIOCSSIG_CURSIG support.
(proc_modify_flag): Replace GDBRESET by PCUNSET.
Remove PR_ASYNC, PR_KLC tests.
(proc_unset_inherit_on_fork): Remove PR_ASYNC test.
(proc_parent_pid): Remove PCWATCH etc. tests.
(proc_set_watchpoint): Remove !PCWATCH && !PIOCSWATCH support.
Remove PCAGENT test.
(proc_get_nthreads) [PIOCNTHR && PIOCTLIST]: Remove.
Remove SYS_lwpcreate || SYS_lwp_create test.
(proc_get_current_thread): Likewise.
[PIOCNTHR && PIOCTLIST]: Remove.
[PIOCLSTATUS]: Remove.
(procfs_debug_inferior): Remove non-Solaris cases, conditionals.
[PRFS_STOPEXEC]: Remove.
(syscall_is_lwp_exit): Remove non-Solaris cases, conditionals.
(syscall_is_exit): Likewise.
(syscall_is_exec): Likewise.
(syscall_is_lwp_create): Likewise.
Remove SYS_syssgi support.
(procfs_wait): Remove PR_ASYNC, !PIOCSSPCACT tests.
[SYS_syssgi]: Remove.
Remove non-Solaris cases, conditionals.
(unconditionally_kill_inferior) [PROCFS_NEED_PIOCSSIG_FOR_KILL]:
Remove.
(procfs_init_inferior) [SYS_syssgi]: Remove.
(procfs_set_exec_trap) [PRFS_STOPEXEC]: Remove.
(procfs_inferior_created) [SYS_syssgi]: Remove.
(procfs_set_watchpoint): Remove !AIX5 test.
(procfs_stopped_by_watchpoint): Remove FLTWATCH test, FLTKWATCH
case.
(mappingflags) [MA_PHYS]: Remove.
(info_mappings_callback): Remove PCAGENT test.
Remove PIOCOPENLWP || PCAGENT test.
BaseIndex implies - with the exception of string instructions the
optional presence of a displacement. This is almost completely uniform
for all instructions (the sole exception being MPX ones, which don't
allow 16-bit addressing and hence Disp16), so there's no point in
explicitly stating this in the main opcode table. Drop those explict
specifications in favor of adding logic to i386-gen, shrinking the
table size quite a bit and hence making it more readable.
The opcodes/i386-tbl.h changes are due to a few cases where pointless
Disp* still hadn't been removed from their insns.
While we shouldn't outright reject such (as was wrongly done by commit
4d36230d59 ("x86: Update segment register check in Intel syntax"), as
MASM accepts them even silently, issue (by default) a warning for such
questionable constructs.
Building current gdb mainline with gcc 7.1 on Solaris 11.4 fails:
/vol/src/gnu/gdb/gdb/dist/gdb/sol-thread.c: In function `void _initialize_sol_thread()':
/vol/src/gnu/gdb/gdb/dist/gdb/sol-thread.c:1229:66: error: invalid conversion from `void (*)(char*, int)' to `void (*)(const char*, int)' [-fpermissive]
_("Show info on Solaris user threads."), &maintenanceinfolist);
^
In file included from /vol/src/gnu/gdb/gdb/dist/gdb/completer.h:21:0,
from /vol/src/gnu/gdb/gdb/dist/gdb/symtab.h:31,
from /vol/src/gnu/gdb/gdb/dist/gdb/language.h:26,
from /vol/src/gnu/gdb/gdb/dist/gdb/frame.h:72,
from /vol/src/gnu/gdb/gdb/dist/gdb/gdbarch.h:39,
from /vol/src/gnu/gdb/gdb/dist/gdb/defs.h:557,
from /vol/src/gnu/gdb/gdb/dist/gdb/sol-thread.c:51:
/vol/src/gnu/gdb/gdb/dist/gdb/command.h:140:33: note: initializing argument 3 of `cmd_list_element* add_cmd(const char*, command_class, void (*)(const char*, int), const char*, cmd_list_element**)'
extern struct cmd_list_element *add_cmd (const char *, enum command_class,
^~~~~~~
The following patch allows compilation to succeed on i386-pc-solaris2.11
and sparc-sun-solaris2.11.
* sol-thread.c (info_solthreads): Constify args.
Cast args to void *.
ASFLAGS should be restored after any modification. Fixes
metag-linux +FAIL: Long branch stub
metag-linux +FAIL: Long branch stub (PIC, app)
mn10300-elf +FAIL: difference of two same-section symbols where the difference is held in another section
mn10300-elf +FAIL: relaxation and alignment directives
PR 22471
* testsuite/ld-elf/shared.exp: Save and restore ASFLAGS.
mpfr.h uses a non-portable test to guess if intmax_t is available and
if API functions using intmax_t should be exposed. Define
MPFR_USE_INTMAX_T to override the non-portable test and always expose
these functions. This fixes the build on platforms where the test
guesses incorrectly.
gdb/ChangeLog:
* target-float.c [HAVE_LIBMPFR]: Define MPFR_USE_INTMAX_T.
This patch fixes a potential issue which was noticed by code inspection:
ada-lang.c::to_fixed_range_type uses gdbtypes.c::create_static_range_type
to create most of the range type, which relies on create_range_type to
do most of the work. The latter has the following piece of code which
sets the length of the range type to match the length of the index_type:
if (TYPE_STUB (index_type))
TYPE_TARGET_STUB (result_type) = 1;
else
TYPE_LENGTH (result_type) = TYPE_LENGTH (check_typedef (index_type));
In Ada, it is actually possible to have a range type whose size
is smaller than its base type. For instance, with:
type Unsigned2_T is range 0 .. 2 ** 16 - 1;
for Unsigned2_T'SIZE use 16;
The compiler generates the following DWARF:
.uleb128 0x3 # (DIE (0x4e) DW_TAG_subrange_type)
.byte 0x2 # DW_AT_byte_size
.byte 0 # DW_AT_lower_bound
.value 0xffff # DW_AT_upper_bound
.long .LASF64 # DW_AT_name: "try__unsigned2_t___XDLU_0__65535"
.long 0x616 # DW_AT_type
... which points to the following base type...
.uleb128 0x1d # (DIE (0x616) DW_TAG_base_type)
.byte 0x4 # DW_AT_byte_size
.byte 0x5 # DW_AT_encoding
.long .LASF57 # DW_AT_name: "try__Tunsigned2_tB"
# DW_AT_artificial
... which has a size of 4 bytes.
With a type like this one, create_range_type returns a type whose
size is 4 bytes, instead of 2, which is not what we we would normally
expect.
Currently, this function is only used to handle array index types,
so the length of the type actually does not matter and there should
not be any user-visible consequences of the current behavior. But
it seems best to plug this latent bug now, rather than wait for it
to surface....
gdb/ChangeLog:
* ada-lang.c (to_fixed_range_type): Make sure that the size
of the range type being returned is the same as the size
of the range type being fixed.
Tested on x86_64-linux, no regression.
Trying to set a breakpoint in a function with an ABI tag does not work
currently. E.g., debugging gdb itself, we see this with the
"string_printf" function:
(top-gdb) b string_print [TAB]
(top-gdb) b string_printf[abi:cxx11](char const*, ...) [RET]
No source file named string_printf[abi.
Make breakpoint pending on future shared library load? (y or [n])
Quoting doesn't help:
(top-gdb) b 'string_printf[abi:cxx11]'(char const*, ...)
malformed linespec error: unexpected string, "(char const*, ...)"
(top-gdb) b 'string_printf[abi:cxx11](char const*, ...)'
No source file named string_printf[abi.
Make breakpoint pending on future shared library load? (y or [n]) n
This patch fixes this, and takes it a bit further.
The actual symbol name as demangled by libiberty's demangler is really
string_printf[abi:cxx11](char const*, ...)
however, this patch makes it possible to set the breakpoint with
string_printf(char const*, ...)
too. I.e., ignoring the ABI tag.
And to match, it teaches the completer to complete the symbol name
without the ABI tag, i.e.,
"string_pri<TAB>" -> "string_printf(char const*, ...)"
If however, you really want to break on a symbol with the tag, then
you simply start writing the tag, and GDB will preserve it, like:
"string_printf[a<TAB>" -> "string_printf[abi:cxx11](char const*, ...)"
Grows the gdb.linespec/ tests like this:
-# of expected passes 8977
+# of expected passes 9176
gdb/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
PR c++/19436
* NEWS: Mention setting breakpoints on functions with C++ ABI
tags.
* completer.h (completion_match_for_lcd) <match,
mark_ignored_range>: New methods.
<finish>: Consider ignored ranges.
<clear>: Clear ignored ranges.
<m_ignored_ranges, m_finished_storage>: New fields.
* cp-support.c (cp_search_name_hash): Ignore ABI tags.
(cp_symbol_name_matches_1, cp_fq_symbol_name_matches): Pass the
completion_match_for_lcd pointer to strncmp_iw_with_mode.
(test_cp_symbol_name_cmp): Add [abi:...] tags unit tests.
* language.c (default_symbol_name_matcher): Pass the
completion_match_for_lcd pointer to strncmp_iw_with_mode.
* linespec.c (linespec_lexer_lex_string): Don't tokenize ABI tags.
* utils.c (skip_abi_tag): New function.
(strncmp_iw_with_mode): Add completion_match_for_lcd parameter.
Handle ABI tags.
* utils.h (strncmp_iw_with_mode): Add completion_match_for_lcd
parameter.
gdb/testsuite/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
PR c++/19436
* gdb.linespec/cpls-abi-tag.cc: New file.
* gdb.linespec/cpls-abi-tag.exp: New file.
gdb/doc/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
PR c++/19436
* gdb.texinfo (Debugging C Plus Plus): Document setting
breakpoints in functions with ABI tags.
This patch teaches GDB about setting breakpoints in all scopes
(namespaces and classes) by default.
Here's a contrived example:
(gdb) b func<tab>
(anonymous namespace)::A::function() Bn::(anonymous namespace)::B::function() function(int, int)
(anonymous namespace)::B::function() Bn::(anonymous namespace)::function() gdb::(anonymous namespace)::A::function()
(anonymous namespace)::B::function() const Bn::(anonymous namespace)::function(int, int) gdb::(anonymous namespace)::function()
(anonymous namespace)::function() Bn::B::func() gdb::(anonymous namespace)::function(int, int)
(anonymous namespace)::function(int, int) Bn::B::function() gdb::A::func()
A::func() Bn::func() gdb::A::function()
A::function() Bn::function() gdb::func()
B::func() Bn::function(int, int) gdb::function()
B::function() Bn::function(long) gdb::function(int, int)
B::function() const func() gdb::function(long)
B::function_const() const function()
(gdb) b function
Breakpoint 1 at 0x4005ce: function. (26 locations)
(gdb) b B::function<tab>
(anonymous namespace)::B::function() B::function() const Bn::B::function()
(anonymous namespace)::B::function() const B::function_const() const
B::function() Bn::(anonymous namespace)::B::function()
(gdb) b B::function
Breakpoint 1 at 0x40072c: B::function. (6 locations)
To get back the original behavior of interpreting the function name as
a fully-qualified name, you can use the new "-qualified" (or "-q")
option/flag (added by this commit). For example:
(gdb) b B::function
(anonymous namespace)::B::function() B::function() const Bn::B::function()
(anonymous namespace)::B::function() const B::function_const() const
B::function() Bn::(anonymous namespace)::B::function()
vs:
(gdb) b -qualified B::function
B::function() B::function() const B::function_const() const
I've chosen "-qualified" / "-q" because "-f" (for "full" or
"fully-qualified") is already taken for "-function".
Note: the "-qualified" option works with both linespecs and explicit
locations. I.e., these are equivalent:
(gdb) b -q func
(gdb) b -q -f func
and so are these:
(gdb) b -q filename.cc:func
(gdb) b -q -s filename.cc -f func
(gdb) b -s filename.cc -q -f func
(gdb) b -s filename.cc -f func -q
To better understand why I consider wild matching the better default,
consider what happens when we get to the point when _all_ of GDB is
wrapped under "namespace gdb {}". I have a patch series that does
that, and when I started debugging that GDB, I immediately became
frustrated. You'd have to write "b gdb::internal_error", "b
gdb::foo", "b gdb::bar", etc. etc., which gets annoying pretty
quickly. OTOH, consider how this makes it very easy to set
breakpoints in classes wrapped in anonymous namespaces. You just
don't think of them, GDB finds the symbols for you automatically.
(At the Cauldron a couple months ago, several people told me that they
run into a similar issue when debugging other C++ projects. One
example was when debugging LLVM, which puts all its code under the
"llvm" namespace.)
Implementation-wise, what the patch does is:
- makes C++ symbol name hashing only consider the last component of
a symbol name. (so that we can look up symbol names by
last-component name only).
- adds a C++ symbol name matcher for symbol_name_match_type::WILD,
which ignores missing leading specifiers / components.
- adjusts a few preexisting testsuite tests to use "-qualified" when
they mean it.
- adds new testsuite tests.
- adds unit tests.
Grows the gdb.linespec/ tests like this:
-# of expected passes 7823
+# of expected passes 8977
gdb/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* NEWS: Mention that breakpoints on C++ functions are now set on
on all namespaces/classes by default, and mention "break
-qualified".
* ax-gdb.c (agent_command_1): Adjust to pass a
symbol_name_match_type to new_linespec_location.
* breakpoint.c (parse_breakpoint_sals): Adjust to
get_linespec_location's return type change.
(strace_marker_create_sals_from_location): Adjust to pass a
symbol_name_match_type to new_linespec_location.
(strace_marker_decode_location): Adjust to get_linespec_location's
return type change.
(strace_command): Adjust to pass a symbol_name_match_type to
new_linespec_location.
(LOCATION_HELP_STRING): Add paragraph about wildmatching, and
mention "-qualified".
* c-lang.c (cplus_language_defn): Install cp_search_name_hash.
* completer.c (explicit_location_match_type::MATCH_QUALIFIED): New
enumerator.
(complete_address_and_linespec_locations): New parameter
'match_type'. Pass it down.
(explicit_options): Add "-qualified".
(collect_explicit_location_matches): Pass the requested match type
to the linespec completers. Handle MATCH_QUALIFIED.
(location_completer): Handle "-qualified" combined with linespecs.
* cp-support.c (cp_search_name_hash): New.
(cp_symbol_name_matches_1): Implement wild matching for C++.
(cp_fq_symbol_name_matches): Reimplement.
(cp_get_symbol_name_matcher): Return different matchers depending
on the lookup name's match type.
(selftests::test_cp_symbol_name_matches): Add wild matching tests.
* cp-support.h (cp_search_name_hash): New declaration.
* dwarf2read.c
(selftests::dw2_expand_symtabs_matching::test_symbols): Add
symbols.
(test_dw2_expand_symtabs_matching_symbol): Add wild matching
tests.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Adjust to
pass a symbol_name_match_type to new_linespec_location.
* linespec.c (linespec_parse_basic): Lookup function symbols using
the parser's symbol name match type.
(convert_explicit_location_to_linespec): New
symbol_name_match_type parameter. Pass it down to
find_linespec_symbols.
(convert_explicit_location_to_sals): Pass the location's name
match type to convert_explicit_location_to_linespec.
(parse_linespec): New match_type parameter. Save it in the
parser.
(linespec_parser_new): Default to symbol_name_match_type::WILD.
(linespec_complete_function): New symbol_name_match_type
parameter. Use it.
(complete_linespec_component): Pass down the parser's recorded
name match type.
(linespec_complete_label): New symbol_name_match_type parameter.
Use it.
(linespec_complete): New symbol_name_match_type parameter. Save
it in the parser and pass it down. Adjust to
get_linespec_location's prototype change.
(find_function_symbols, find_linespec_symbols): New
symbol_name_match_type parameter. Pass it down instead of
assuming symbol_name_match_type::WILD.
* linespec.h (linespec_complete, linespec_complete_function)
(linespec_complete_label): New symbol_name_match_type parameter.
* location.c (event_location::linespec_location): Now a struct
linespec_location.
(EL_LINESPEC): Adjust.
(initialize_explicit_location): Default to
symbol_name_match_type::WILD.
(new_linespec_location): New symbol_name_match_type parameter.
Record it in the location.
(get_linespec_location): Now returns a struct linespec_location.
(new_explicit_location): Also copy func_name_match_type.
(explicit_to_string_internal)
(string_to_explicit_location): Handle "-qualified".
(copy_event_location): Adjust to LINESPEC_LOCATION type change.
Copy symbol_name_match_type fields.
(event_location_deleter::operator()): Adjust to LINESPEC_LOCATION
type change.
(event_location_to_string): Adjust to LINESPEC_LOCATION type
change. Handle "-qualfied".
(string_to_explicit_location): Handle "-qualified".
(string_to_event_location_basic): New symbol_name_match_type
parameter. Pass it down.
(string_to_event_location): Handle "-qualified".
* location.h (struct linespec_location): New.
(explicit_location::func_name_match_type): New field.
(new_linespec_location): Now returns a const linespec_location *.
(string_to_event_location_basic): New symbol_name_match_type
parameter.
(explicit_completion_info::saw_explicit_location_option): New
field.
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Adjust to pass a
symbol_name_match_type to new_linespec_location.
* python/py-breakpoint.c (bppy_init): Likewise.
* python/python.c (gdbpy_decode_line): Likewise.
gdb/testsuite/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* gdb.base/langs.exp: Use -qualified.
* gdb.cp/meth-typedefs.exp: Use -qualified, and add tests without
it.
* gdb.cp/namespace.exp: Use -qualified.
* gdb.linespec/cpcompletion.exp (overload-2, fqn, fqn-2)
(overload-3, template-overload, template-ret-type, const-overload)
(const-overload-quoted, anon-ns, ambiguous-prefix): New
procedures.
(test_driver): Call them.
* gdb.cp/save-bp-qualified.cc: New.
* gdb.cp/save-bp-qualified.exp: New.
* gdb.linespec/explicit.exp: Test -qualified.
* lib/completion-support.exp (completion::explicit_opts_list): Add
"-qualified".
* lib/gdb.exp (gdb_breakpoint): Handle "qualified".
gdb/doc/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Linespec Locations): Document how "function" is
interpreted in C++ and Ada. Document "-qualified".
(Explicit Locations): Document how "-function" is interpreted in
C++ and Ada. Document "-qualified".
A following patch will add support for wild matching for C++ symbols,
making completing on "b push_ba" on a C++ program complete to
std::vector<...>::push_back, std::string::push_back etc., like:
(gdb) b push_ba[TAB]
std::vector<...>::push_back(....)
std::string<...>::push_back(....)
Currently, we compute the "lowest common denominator" between all
completion candidates (what the input line is adjusted to) as the
common prefix of all matches. That's problematic with wild matching
as above, as then we'd end up with TAB changing the input line to
"b std::", losing the original input, like:
(gdb) b push_ba[TAB]
std::vector<...>::push_back(....)
std::string<...>::push_back(....)
(gdb) b std::
while obviously we'd want it to adjust itself to "b push_back(" instead:
(gdb) b push_ba[TAB]
std::vector<...>::push_back(....)
std::string<...>::push_back(....)
(gdb) b push_back(
This patch adds the core code necessary to support this, though
nothing really makes use of it yet in this patch.
gdb/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_lookup_name_info::matches): Change type of
parameter from completion_match to completion_match_result.
Adjust.
(do_wild_match, do_full_match, ada_symbol_name_matches): Likewise.
* completer.c (completion_tracker::maybe_add_completion): Add
match_for_lcd parameter and use it.
(completion_tracker::add_completion): Likewise.
* completer.h (class completion_match_for_lcd): New class.
(completion_match_result::match_for_lcd): New field.
(completion_match_result::set_match): New method.
(completion_tracker): Add comments.
(completion_tracker::add_completion): Add match_for_lcd parameter.
(completion_tracker::reset_completion_match_result): Reset
match_for_lcd too.
(completion_tracker::maybe_add_completion): Add match_for_lcd
parameter.
(completion_tracker::m_lowest_common_denominator_unique): Extend
comments.
* cp-support.c (cp_symbol_name_matches_1)
(cp_fq_symbol_name_matches): Change type of parameter from
completion_match to completion_match_result. Adjust.
* language.c (default_symbol_name_matcher): Change type of
parameter from completion_match to completion_match_result.
Adjust.
* language.h (completion_match_for_lcd): Forward declare.
(default_symbol_name_matcher): Change type of parameter from
completion_match to completion_match_result.
* symtab.c (compare_symbol_name): Adjust.
(completion_list_add_name): Pass the match_for_lcd to the tracker.
* symtab.h (ada_lookup_name_info::matches): Change type of
parameter from completion_match to completion_match_result.
(symbol_name_matcher_ftype): Likewise, and update comments.
