bfd * coff-i386.c (in_reloc_p): Add R_SECTION.
(howto_table): Add R_SECTION.
(coff_pe_i386_relocation_section): Add support for R_SECTION.
(coff_i386_reloc_type_lookup): Add support for
BFD_RELOC_16_SECCIDX.
* coff-x86_64.c (in_reloc_p): Add R_SECTION.
(howto_table): Add R_SECTION.
(coff_pe_amd64_relocation_section): Add support for R_SECTION.
(coff_amd64_reloc_type_lookup): Add support for
BFD_RELOC_16_SECCIDX.
* reloc.c: Add BFD_RELOC_16_SECIDX.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas * config/tc-i386.c (pe_directive_secidx): New function.
(md_pseudo_table): Add support for secidx.
(x86_cons_fix_new): Likewise.
(tc_gen_reloc): Likewise.
* expr.c (op_rank): Add O_secidx.
* expr.h (operatorT): Likewise.
* symbols.c (resolve_symbol_value): Add support for O_secidx.
* testsuite/gas/i386/secidx.s: New test source file.
* testsuite/gas/i386/secidx.d: New test driver file.
* testsuite/gas/i386/i386.exp: Run new test.
include * coff/i386.h: Define R_SECTION.
* coff/x86_64.h: Likewise.
ld * testsuite/ld-pe/secidx1.s: New test source file.
* testsuite/ld-pe/secidx2.s: New test source file.
* testsuite/ld-pe/secidx.d: New test driver file.
* testsuite/ld-pe/secidx_64.d: New test driver file.
* testsuite/ld-pe/pe.exp: Add new tests.
So far z16 was identified as arch14. After the machine has been
announced we can now add the real name.
gas/ChangeLog:
* config/tc-s390.c (s390_parse_cpu): Add z16 as alternate CPU
name.
* doc/as.texi: Add z16 and arch14 to CPU string list.
* doc/c-s390.texi: Add z16 to CPU string list.
opcodes/ChangeLog:
* s390-mkopc.c (main): Enable z16 as CPU string in the opcode
table.
PR 28981
* dwarf.c (fetch_indexed_value): Rename to fecth_indexed_addr and
return the address, rather than a string.
(fetch_indexed_value): New function - returns a value indexed by a
DW_FORM_loclistx or DW_FORM_rnglistx form.
(read_and_display_attr_value): Add support for DW_FORM_loclistx
and DW_FORM_rnglistx.
(process_debug_info): Load the loclists and rnglists sections.
(display_loclists_list): Add support for DW_LLE_base_addressx,
DW_LLE_startx_endx, DW_LLE_startx_length and
DW_LLE_default_location.
(display_offset_entry_loclists): New function. Displays a
.debug_loclists section that contains offset entry tables.
(display_debug_loc): Call the new function.
(display_debug_rnglists_list): Add support for
DW_RLE_base_addressx, DW_RLE_startx_endx and DW_RLE_startx_length.
(display_debug_ranges): Display the contents of the section's
header.
* dwarf.h (struct debug_info): Add loclists_base field.
* testsuite/binutils-all/dw5.W: Update expected output.
* testsuite/binutils-all/x86-64/pr26808.dump: Likewise.
PR 28791
* config/tc-z80.c (emit_data_val): Do not warn about overlarge
constants generated by bit manipulation operators.
* testsuite/gas/z80/pr28791.s: New test source file.
* testsuite/gas/z80/pr28791.d: New test driver file.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
In out_dir_and_file_list, if file 0 is copied from file 1, only the filename
is copied, and the dir and md5 fields are left to their default values.
Fix this by adding the copy of the dir and md5 fields.
gas/ChangeLog:
2021-11-26 Tom de Vries <tdevries@suse.de>
PR 28629
* dwarf2dbg.c (out_dir_and_file_list): When copying file 1 to file 0,
also copy dir and md5 fields.
* testsuite/gas/i386/dwarf5-line-4.d: Adjust expected output.
* as.c (parse_args): Add support for --multibyte-handling.
* as.h (multibyte_handling): Declare.
* app.c (scan_for_multibyte_characters): New function.
(do_scrub_chars): Call the new function if multibyte warning is
enabled.
* input-scrub,c (input_scrub_next_buffer): Call the multibyte
scanning function if multibyte warnings are enabled.
* symbols.c (struct symbol_flags): Add multibyte_warned bit.
(symbol_init): Call the multibyte scanning function if multibyte
symbol warnings are enabled.
(S_SET_SEGMENT): Likewise.
* NEWS: Mention the new feature.
* doc/as.texi: Document the new feature.
* testsuite/gas/all/multibyte.s: New test source file.
* testsuite/gas/all/multibyte1.d: New test driver file.
* testsuite/gas/all/multibyte1.l: New test expected output.
* testsuite/gas/all/multibyte2.d: New test driver file.
* testsuite/gas/all/multibyte2.l: New test expected output.
* testsuite/gas/all/gas.exp: Run the new tests.
Gas uses the directory part, if present, of the .file 0 directive to set
entry 0 of the directory table in DWARF 5, which represents the "current
directory".
Now Gas also uses the file part of the same directive to set entry 0 of the
file table, which represents the "current compilation file". But the latter
need not be located in the former so GCC will use a full path in the file
part when it is passed a full path:
gcc -c /full/path/test.c -save-temps
yields:
.file 0 "/current/directory" "/full/path/test.c"
in the assembly file and:
The Directory Table (offset 0x22, lines 2, columns 1):
Entry Name
0 (indirect line string, offset: 0x25): /current/directory
1 (indirect line string, offset: 0x38): /full/path
The File Name Table (offset 0x30, lines 2, columns 2):
Entry Dir Name
0 0 (indirect line string, offset: 0x43): /full/path/test.c
in the object file. Note the full path and the questionable Dir value in
the 0 entry of the file table.
PR 28436
* config/tc-arm.c (do_vfp_nsyn_push_pop_check): New function.
(do_vfp_nsyn_pop): Use the new function.
(do_vfp_nsyn_push): Use the new function.
* testsuite/gas/arm/v8_1m-mve.s: Add new instructions.
* testsuite/gas/arm/v8_1m-mve.d: Updated expected disassembly.
SPR 896 and the mfppr mfppr32, mtppr and mtppr32 extended mnemonics were added
in ISA 2.03, so enable them on POWER5 and later.
opcodes/
* ppc-opc.c (powerpc_opcodes) <mfppr, mfppr32, mtppr, mtppr32>: Enable
on POWER5 and later.
gas/
* testsuite/gas/ppc/power5.s: New test.
* testsuite/gas/ppc/power5.d: Likewise.
* testsuite/gas/ppc/ppc.exp: Run it.
* testsuite/gas/ppc/power7.s: Remove tests for mfppr, mfppr32, mtppr
and mtppr32.
* testsuite/gas/ppc/power7.d: Likewise.
PR 28292
gas * config/tc-v850.c (handle_lo16): Also accept
BFD_RELOC_V850_LO16_SPLIT_OFFSET.
* testsuite/gas/v850/split-lo16.s: Add extra line.
* testsuite/gas/v850/split-lo16.d: Update expected disassembly.
opcodes * v850-opc.c (D16): Use BFD_RELOC_V850_LO16_SPLIT_OFFSET in place
of BFD_RELOC_16.
Some frontends, like the gcc Objective-C frontend, emit symbols with $
characters in them. The AVR target code in gas treats $ as a line separator,
so the code doesn?t assemble correctly.
Provide a machine-specific option to disable treating $ as a line separator.
* config/tc-avr.c (enum options): Add option flag.
(struct option): Add option -mno-dollar-line-separator.
(md_parse_option): Adjust treatment of $ when option is present.
* config/tc-avr.h: Use avr_line_separator_chars.
* dwarf2dbg.c (get_directory_table_entry): Ensure that dir[0]
contains current working directory.
(out_dir_and_file_list): Likewise.
* testsuite/gas/elf/dwarf-5-dir0.s: New test source file.
* testsuite/gas/elf/dwarf-5-dir0.d: New test driver.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/elf/dwarf-5-file0.d: Adjust expected output.
* testsuite/gas/i386/dwarf5-line-1.d: Likewise.
* testsuite/gas/i386/dwarf5-line-2.d: Likewise.
gas/write.c provides a fallback TC_VALIDATE_FIX_SUB define that can be
a problem for some targets, the problem being that a non-zero
definition of TC_VALIDATE_FIX_SUB says that some uses of fx_subsy are
OK, in effect that the target will handle fx_subsy in md_apply_fix
and/or tc_gen_reloc. A lot of targets don't have the necessary
md_apply_fix and tc_gen_reloc support. So a safer default is to
disallow fx_subsy by default.
I've had a good look over target usage of fx_subsy, and think I've
caught all the cases where targets need TC_VALIDATE_FIX_SUB. Possible
failures would be limited to alpha, microblaze, ppc and s390 (the
targets that define UNDEFINED_DIFFERENCE_OK), or targets that generate
fixups with BFD_RELOC_GPREL32/16 and use a syntax explicitly showing
a difference expression.
* write.c (TC_VALIDATE_FIX_SUB): Default to 0.
* config/tc-hppa.h (TC_VALIDATE_FIX_SUB): Define.
* config/tc-microblaze.h (TC_VALIDATE_FIX_SUB): Define.
* config/tc-alpha.h (TC_VALIDATE_FIX_SUB): Define for ECOFF.
* config/tc-ppc.h (TC_VALIDATE_FIX_SUB): Don't define for ELF.
Do define for XCOFF.
DWARF sections have special names on AIX which need be handled
by objdump in order to correctly print them.
This patch also adds the correlation in bfd for future uses.
bfd/
* libxcoff.h (struct xcoff_dwsect_name): Add DWARF name.
* coff-rs6000.c (xcoff_dwsect_names): Update.
* coffcode.h (sec_to_styp_flags): Likewise.
(coff_new_section_hook): Likewise.
binutils/
* dwarf.h (struct dwarf_section): Add XCOFF name.
* dwarf.c (struct dwarf_section_display): Update.
* objdump.c (load_debug_section): Add XCOFF name handler.
(dump_dwarf_section): Likewise.
gas/
* config/tc-ppc.c (ppc_change_debug_section): Update to
match new name's field.
Some extern declarations differ in constnes to their definitions too.
Let's make sure this sort of thing doesn't happen again, but putting
the externs in a header where they belong.
gas/
* config/tc-nds32.c (nds32_keyword_gpr): Don't declare.
(md_begin): Constify k.
opcodes/
* nds32-dis.c (nds32_find_reg_keyword): Constify arg and return.
(nds32_parse_audio_ext, nds32_parse_opcode): Constify psys_reg.
(nds32_field_table, nds32_opcode_table, nds32_keyword_table),
(nds32_opcodes, nds32_operand_fields, nds32_keywords),
(nds32_keyword_gpr): Move declarations to..
* nds32-asm.h: ..here, constifying to match definitions.
This is exporting the variable "opcodes" as a large writable blob.
This is not a namespace friendly name, so add a "microblaze" prefix,
and then sprinkle const over its definition & use.
Power10 prefixed instructions must not cross 64-byte boundaries.
This is already handled.
However, on XCOFF, the csect must be updated to match the new
alignment.
* config/tc-ppc.c (md_assemble): Update ppc_current_csect
alignment when finding prefixed instructions.
Commit 54758c3e39 made changes to the picojava support based on
https://sourceware.org/pipermail/binutils/2005-November/045136.html
An update from picojava to picojava II, I think. Unfortunately the
patch neglected any changes to the gas testsuite, resulting in
"FAIL: pj" since that date. This patch makes a few relatively simple
changes to cure the regression.
gas/
* config/tc-pj.c (md_apply_fix): Apply PJ_CODE_REL32 relocs.
* testsuite/gas/pj/ops.s: Update jsr, ret, getstatic,
putstatic, getfield, putfield, invokevirtual, invokespecial,
invokestatic, invokeinterface, goto_w, jsr_w assembly. Delete
version 1 picojava opcodes.
* testsuite/gas/pj/ops.d: Match expected output.
opcodes/
* pj-dis.c (print_insn_pj): Don't print trailing tab. Do
print separator for pcrel insns.
A shift count exceeding the size of the value is undefined behaviour,
and so is negating a signed LONG_MIN.
* config/tc-z80.c (signed_overflow, unsigned_overflow): Avoid UB.
The test contained an expression that can't be evaluated unless
expressions are 64-bit.
* testsuite/gas/ppc/raw.s: Use 0 as pli constant.
* testsuite/gas/ppc/raw.d: Update to suit.
When the same such construct is used multiple times in a source file,
there's still no need to emit a separate symbol each time. Under the
assumption that there won't be many of these, use a simple array
lookup method to record previously used symbols.
PR 27904
* config/tc-aarch64.c (ldst_lo12_determine_real_reloc_type):
Generate a syntax error message if the reloc qualifier does not
match the instruction's size.
Latest gcc versions are now generating csects instead of .lcomm
for bss symbols.
Some adjustements are needed in order to handle them.
* config/tc-ppc.c (md_begin): Create bss section with dummy
symbol.
(ppc_frob_symbol): Output XTY_CM for bss csects.
(ppc_fix_adjustable): Adjust condition to avoid bss csects.
AIX ld expects the section contents for relocations BFD_RELOC_PPC_TLSM
or BFD_RELOC_PPC64_TLSM to be zero.
Actually, it seems to be the case for all the TLS relocations
generated by AIX assembly but only these two are mandatory.
* config/tc-ppc.c (md_apply_fix): Adjust addend to nullify
section contents for BFD_RELOC_PPC_TLSM or
BFD_RELOC_PPC64_TLSM.
* testsuite/gas/ppc/xcoff-tlsm-32.d: New test.
* testsuite/gas/ppc/xcoff-tlsm-64.d: New test.
* testsuite/gas/ppc/xcoff-tlsm.s: New test.
* testsuite/gas/ppc/aix.exp: Run new tests.
Unlike for .dc.? the parsing here failed to skip the colon before
calling hex_float(). To avoid both variants of parsing going out of sync
again, introduce a helper used by both.
While the logic in fixup_segment() so far was off by 1 for fixups
dealing with quantities without known signedness, thus failing to report
an overflow when e.g. a byte-sized resulting value is -0x100, the logic
in emit_expr_with_reloc() reported an overflow even on large negative
values when the respective positive ones would not be warned
about, and when fixup_segment() wouldn't do so either. Such diagnostics
all ought to follow a similar pattern of what value range is acceptable.
(If expressions' X_unsigned was reliably set, emit_expr_with_reloc()'s
checking might make sense to tighten based on that flag.)
Note that with commit 80aab57939 ("Changes to let cons handle bignums
like general expressions") having added handling of nbytes >
sizeof(valueT) in the O_constant case, converting to O_big, the setting
to zero of "hibit" had become dead. With "hibit" no longer used, this
code now gets dropped altogether. But additionally a respective know()
gets inserted.
The testsuite uses the output to determine whether BFD64 is in effect.
--x32 is supported for ELF only; don't advertise it for PE/COFF. --64 is
also supported for Mach-O; advertise it. Adjust the testsuite's BFD64
check accordingly.
Also replace "code" by "object", since it's the object format that the
options primarily control. It's also _initial_ code bitness, but this
can be changed by directives.
