AARCH64_OPDE_EXPECTED_A_AFTER_B and AARCH64_OPDE_A_SHOULD_FOLLOW_B
are not paired with an error string, but we had an assert that the
error was nonnull. Previously this assert was testing uninitialised
memory and so could pass or fail arbitrarily.
opcodes/
* aarch64-opc.c (verify_mops_pme_sequence): Initialize the error
field to null for AARCH64_OPDE_EXPECTED_A_AFTER_B and
AARCH64_OPDE_A_SHOULD_FOLLOW_B.
* aarch64-dis.c (print_verifier_notes): Move assert.
The MOPS instructions should be used as a triple, such as:
cpyfp [x0]!, [x1]!, x2!
cpyfm [x0]!, [x1]!, x2!
cpyfe [x0]!, [x1]!, x2!
The registers should also be the same for each writeback operand.
This patch adds a warning for code that doesn't follow this rule,
along similar lines to the warning that we already emit for
invalid uses of MOVPRFX.
include/
* opcode/aarch64.h (C_SCAN_MOPS_P, C_SCAN_MOPS_M, C_SCAN_MOPS_E)
(C_SCAN_MOPS_PME): New macros.
(AARCH64_OPDE_A_SHOULD_FOLLOW_B): New aarch64_operand_error_kind.
(AARCH64_OPDE_EXPECTED_A_AFTER_B): Likewise.
(aarch64_operand_error): Make each data value a union between
an int and a string.
opcodes/
* aarch64-tbl.h (MOPS_CPY_OP1_OP2_INSN): Add scan flags.
(MOPS_SET_OP1_OP2_INSN): Likewise.
* aarch64-opc.c (set_out_of_range_error): Update after change to
aarch64_operand_error.
(set_unaligned_error, set_reg_list_error): Likewise.
(init_insn_sequence): Use a 3-instruction sequence for
MOPS P instructions.
(verify_mops_pme_sequence): New function.
(verify_constraints): Call it.
* aarch64-dis.c (print_verifier_notes): Handle
AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
gas/
* config/tc-aarch64.c (operand_mismatch_kind_names): Add entries
for AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
(operand_error_higher_severity_p): Check that
AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B
come between AARCH64_OPDE_RECOVERABLE and AARCH64_OPDE_SYNTAX_ERROR;
their relative order is not significant.
(record_operand_error_with_data): Update after change to
aarch64_operand_error.
(output_operand_error_record): Likewise. Handle
AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
* testsuite/gas/aarch64/mops_invalid_2.s,
testsuite/gas/aarch64/mops_invalid_2.d,
testsuite/gas/aarch64/mops_invalid_2.l: New test.
This patch adds support for FEAT_MOPS, an Armv8.8-A extension
that provides memcpy and memset acceleration instructions.
I took the perhaps controversial decision to generate the individual
instruction forms using macros rather than list them out individually.
This becomes useful with a follow-on patch to check that code follows
the correct P/M/E sequence.
[https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions?lang=en]
include/
* opcode/aarch64.h (AARCH64_FEATURE_MOPS): New macro.
(AARCH64_ARCH_V8_8): Make armv8.8-a imply AARCH64_FEATURE_MOPS.
(AARCH64_OPND_MOPS_ADDR_Rd): New aarch64_opnd.
(AARCH64_OPND_MOPS_ADDR_Rs): Likewise.
(AARCH64_OPND_MOPS_WB_Rn): Likewise.
opcodes/
* aarch64-asm.h (ins_x0_to_x30): New inserter.
* aarch64-asm.c (aarch64_ins_x0_to_x30): New function.
* aarch64-dis.h (ext_x0_to_x30): New extractor.
* aarch64-dis.c (aarch64_ext_x0_to_x30): New function.
* aarch64-tbl.h (aarch64_feature_mops): New feature set.
(aarch64_feature_mops_memtag): Likewise.
(MOPS, MOPS_MEMTAG, MOPS_INSN, MOPS_MEMTAG_INSN)
(MOPS_CPY_OP1_OP2_PME_INSN, MOPS_CPY_OP1_OP2_INSN, MOPS_CPY_OP1_INSN)
(MOPS_CPY_INSN, MOPS_SET_OP1_OP2_PME_INSN, MOPS_SET_OP1_OP2_INSN)
(MOPS_SET_INSN): New macros.
(aarch64_opcode_table): Add MOPS instructions.
(aarch64_opcode_table): Add entries for AARCH64_OPND_MOPS_ADDR_Rd,
AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn.
* aarch64-opc.c (aarch64_print_operand): Handle
AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and
AARCH64_OPND_MOPS_WB_Rn.
(verify_three_different_regs): New function.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
gas/
* doc/c-aarch64.texi: Document +mops.
* config/tc-aarch64.c (parse_x0_to_x30): New function.
(parse_operands): Handle AARCH64_OPND_MOPS_ADDR_Rd,
AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn.
(aarch64_features): Add "mops".
* testsuite/gas/aarch64/mops.s, testsuite/gas/aarch64/mops.d: New test.
* testsuite/gas/aarch64/mops_invalid.s,
* testsuite/gas/aarch64/mops_invalid.d,
* testsuite/gas/aarch64/mops_invalid.l: Likewise.
Armv8.8-A defines a read-only system register called id_aa64isar2_el1.
The register was previously RES0 and should therefore be accepted
at all architecture levels.
[https://developer.arm.com/documentation/ddi0595/2021-09/AArch64-Registers/ID-AA64ISAR2-EL1--AArch64-Instruction-Set-Attribute-Register-2?lang=en]
opcodes/
* aarch64-opc.c (aarch64_sys_regs): Add id_aa64isar2_el1.
gas/
* testsuite/gas/aarch64/sysreg-diagnostic.s: Test writes to
id_aa64isar2_el1.
* testsuite/gas/aarch64/sysreg-diagnostic.d: Update accordingly.
* testsuite/gas/aarch64/sysreg-diagnostic.l: Likewise.
* testsuite/gas/aarch64/sysreg.s: Test reads from
id_aa64isar2_el1.
* testsuite/gas/aarch64/sysreg.d: Update accordingly.
libopcodes has some code to check constraints across sequences
of consecutive instructions. It was added to support MOVPRFX
sequences but is going to be useful for the Armv8.8-A MOPS
feature as well.
Currently the structure has one field to record the instruction
that started a sequence and another to record the remaining
instructions in the sequence. It's more convenient for the
MOPS code if we put the instructions into a single array instead.
No functional change intended.
include/
* opcode/aarch64.h (aarch64_instr_sequence): Replace num_insns
and current_insns with num_added_insns and num_allocated_insns.
opcodes/
* aarch64-opc.c (add_insn_to_sequence): New function.
(init_insn_sequence): Update for new aarch64_instr_sequence layout.
Add the first instruction to the inst array.
(verify_constraints): Update for new aarch64_instr_sequence layout.
Don't add the last instruction to the array.
The immediate form of MSR has a 4-bit immediate field (in CRm).
However, many forms of MSR require a smaller immediate. These cases
are identified by value in operand_general_constraint_met_p,
but they're now the common case rather than the exception.
This patch therefore adds the maximum value to the sys_reg
description and gets the range from there. It also enforces
the minimum of 0, which avoids a situation in which:
msr dit, #2
would give the expected:
Error: immediate value out of range 0 to 1
whereas:
msr dit, #-1
would give:
Error: immediate value out of range 0 to 15
(from the later UIMM4 checking).
Also:
- we were reporting the first error above against the wrong operand
- TCO takes a single-bit immediate, but we previously allowed
all 16 values.
[https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions/MSR--immediate---Move-immediate-value-to-Special-Register-?lang=en]
opcodes/
* aarch64-opc.h (F_REG_MAX_VALUE, F_GET_REG_MAX_VALUE): New macros.
* aarch64-opc.c (operand_general_constraint_met_p): Read the
maximum MSR immediate value from aarch64_pstatefields.
(aarch64_pstatefields): Add the maximum immediate value
for each register.
gas/
* testsuite/gas/aarch64/sysreg-4.s: Use an immediate value of 1
rather than 8 for the TCO test.
* testsuite/gas/aarch64/sysreg-4.d: Update accordingly.
* testsuite/gas/aarch64/armv8_2-a-illegal.l: Fix operand number
in MSR immediate error messages.
* testsuite/gas/aarch64/diagnostic.l: Likewise.
* testsuite/gas/aarch64/pan-illegal.l: Likewise.
* testsuite/gas/aarch64/ssbs-illegal1.l: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4b.s,
* testsuite/gas/aarch64/illegal-sysreg-4b.d,
* testsuite/gas/aarch64/illegal-sysreg-4b.l: New test.
This patch adds support for various system registers, up to Armv8.7-A.
This includes all the registers that were mentioned in the PR and that
hadn't become supported since.
opcodes/
PR aarch64/27145
* aarch64-opc.c (SR_V8_4): Remove duplicate definition.
(SR_V8_6, SR_V8_7, SR_GIC, SR_AMU): New macros.
(aarch64_sys_regs): Add missing entries (up to Armv8.7-A).
gas/
PR aarch64/27145
* testsuite/gas/aarch64/sysreg-8.s,
* testsuite/gas/aarch64/sysreg-8.d,
* testsuite/gas/aarch64/illegal-sysreg-8.s,
* testsuite/gas/aarch64/illegal-sysreg-8.d,
* testsuite/gas/aarch64/illegal-sysreg-8.l,
* testsuite/gas/aarch64/illegal-sysreg-8b.s,
* testsuite/gas/aarch64/illegal-sysreg-8b.d,
* testsuite/gas/aarch64/illegal-sysreg-8b.l: New tests.
* testsuite/gas/aarch64/sysreg.s: Change system register numbers
to ones that are still unallocated.
* testsuite/gas/aarch64/sysreg.d: Update accordingly.
We have a +lor feature flag for the Limited Ordering Regions
extension, but the associated registers didn't use it.
opcodes/
* aarch64-opc.c (SR_LOR): New macro.
(aarch64_sys_regs): Use it for lorc_el1, lorea_el1, lorn_el1 and
lorsa_el1.
gas/
* testsuite/gas/aarch64/sysreg-7.s: Enable +lor.
* testsuite/gas/aarch64/illegal-sysreg-7.s: Test for LOR registers
without +lor.
* testsuite/gas/aarch64/illegal-sysreg-7.d: Update accordingly.
* testsuite/gas/aarch64/illegal-sysreg-7.l: Likewise.
ZIDR_EL1 was part of an early version of SVE, but didn't make
it to the final release.
opcodes/
* aarch64-opc.c (aarch64_sys_regs): Remove zidr_el1 entry.
gas/
* testsuite/gas/aarch64/sve-sysreg.s: Remove zidr_el1.
* testsuite/gas/aarch64/sve-sysreg.d: Update accordingly.
* testsuite/gas/aarch64/sve-sysreg-invalid.l: Likewise.
MFAR_EL3 is a read/write register, but was incorrectly marked as
read-only
[https://developer.arm.com/documentation/ddi0601/2021-09/AArch64-Registers/MFAR-EL3--PA-Fault-Address-Register?lang=en]
opcodes/
* aarch64-opc.c (aarch64_sys_regs): Mark mfar_el3 as read-write.
gas/
* testsuite/gas/aarch64/rme.s: Test writing to mfar_el3.
* testsuite/gas/aarch64/rme.d: Update accordingly.
* testsuite/gas/aarch64/rme-invalid.s: Delete.
* testsuite/gas/aarch64/rme-invalid.l: Likewise.
* testsuite/gas/aarch64/rme-invalid.d: Likewise.
We were incorrectly allowing writes to PMSIDR_EL1, which is
a read-only register.
[https://developer.arm.com/documentation/ddi0595/2021-09/AArch64-Registers/PMSIDR-EL1--Sampling-Profiling-ID-Register?lang=en]
opcodes/
* aarch64-opc.c (aarch64_sys_regs): Make pmsidr_el1 as F_REG_READ.
gas/
* testsuite/gas/aarch64/msr.s: Remove write to pmsidr_el1.
* testsuite/gas/aarch64/msr.d: Update accordingly.
* testsuite/gas/aarch64/illegal-sysreg-2.s,
* testsuite/gas/aarch64/illegal-sysreg-2.d,
* testsuite/gas/aarch64/illegal-sysreg-2.l: New test.
There is a lot of overlap between the ETM and ETE system registers,
so some registers were listed twice.
Already tested by etm.[sd] and ete.[sd].
opcodes/
* aarch64-opc.c (aarch64_sys_regs): Combine ETE and ETM blocks
and remove redundant entries.
gas/
* testsuite/gas/aarch64/etm.s: Remove duplicated test.
* testsuite/gas/aarch64/etm.d: Update accordingly.
According the rvv spec,
https://github.com/riscv/riscv-v-spec/blob/master/vtype-format.adoc
The bits of vtype immediate from 8 to (xlen - 1) should be reserved.
Therefore, we should also dump the vtype immediate as numbers, when
they are set over 8-bits. I think this is a bug that we used to support
vediv extension and use the bit 8 and 9 of vtype, but forgot to update
the behavior when removing the vediv.
Consider the testcases,
vsetvli a0, a1, 0x700 # the reserved bit 10, 9 and 8 are used.
vsetvli a0, a1, 0x400 # the reserved bit 10 is used.
vsetvli a0, a1, 0x300 # the reserved bit 9 and 8 are used.
vsetvli a0, a1, 0x100 # the reserved bit 8 is used.
vsetivli a0, 0xb, 0x300 # the reserved bit 9 and 8 are used.
vsetivli a0, 0xb, 0x100 # the reserved bit 8 is used.
The original objdump shows the following result,
0000000000000000 <.text>:
0: 7005f557 vsetvli a0,a1,1792
4: 4005f557 vsetvli a0,a1,1024
8: 3005f557 vsetvli a0,a1,e8,m1,tu,mu
c: 1005f557 vsetvli a0,a1,e8,m1,tu,mu
10: f005f557 vsetivli a0,11,e8,m1,tu,mu
14: d005f557 vsetivli a0,11,e8,m1,tu,mu
But in fact the correct result should be,
0000000000000000 <.text>:
0: 7005f557 vsetvli a0,a1,1792
4: 4005f557 vsetvli a0,a1,1024
8: 3005f557 vsetvli a0,a1,768
c: 1005f557 vsetvli a0,a1,256
10: f005f557 vsetivli a0,11,768
14: d005f557 vsetivli a0,11,256
gas/
* testsuite/gas/riscv/vector-insns.d: Added testcases to
test the reserved bit 8 to (xlen-1) of vtype.
* testsuite/gas/riscv/vector-insns.s: Likewise.
include/
* opcode/riscv.h: Removed OP_MASK_VTYPE_RES and OP_SH_VTYPE_RES,
since they are different for operand Vc and Vb.
opcodes/
* riscv-dis.c (print_insn_args): Updated imm_vtype_res to
extract the reserved immediate of vtype correctly.
Consider the following case,
vsetvli a0, a1, 0x4 # unrecognized vlmul
vsetvli a0, a1, 0x20 # unrecognized vsew
vsetivli a0, 0xb, 0x4 # unrecognized vlmul
vsetivli a0, 0xb, 0x20 # unrecognized vsew
For the current dis-assembler, we get the result,
0000000000000000 <.text>:
0: 0045f557 vsetvli a0,a1,e8,(null),tu,mu
4: 0205f557 vsetvli a0,a1,e128,m1,tu,mu
8: c045f557 vsetivli a0,11,e8,(null),tu,mu
c: c205f557 vsetivli a0,11,e128,m1,tu,mu
The vsew e128 and vlmul (null) are preserved according to the spec,
so dump these fields looks wrong. Consider that we are used to dump
the unrecognized csr as csr numbers directly, we should also dump
the whole vset[i]vli immediates as numbers, once the vsew or vlmul
is reserved. Therefore, following is what I expected,
0000000000000000 <.text>:
0: 0045f557 vsetvli a0,a1,4
4: 0205f557 vsetvli a0,a1,32
8: c045f557 vsetivli a0,11,4
c: c205f557 vsetivli a0,11,32
gas/
* testsuite/gas/riscv/vector-insns.d: Rewrite the vset[i]vli
testcases since we should dump the immediate as numbers once
the vsew or vlmul is reserved.
* testsuite/gas/riscv/vector-insns.s: Likewise.
opcodes/
* riscv-dis.c (print_insn_args): The reserved vsew and vlmul
are NULL string in the riscv_vsew and riscv_vlmul, so dump the
whole imm as numbers once one of them is NULL.
* riscv-opc.c (riscv_vsew): Set the reserved vsew to NULL.
(riscv_vlmul): Set the reserved vlmul to NULL.
In preparation for the next commit, which will add GDB support for
RISC-V disassembler options, this commit restructures how the
disassembler options are managed within libopcodes.
The implementation provided here is based on this mailing list patch
which was never committed:
https://sourceware.org/pipermail/binutils/2021-January/114944.html
which in turn took inspiration from the MIPS implementation of the
same feature.
The biggest changes from the original mailing list post are:
1. The GDB changes have been split into a separate patch, and
2. The `riscv_option_args_privspec` variable, which held the valid
priv-spec values is now gone, instead we use the `riscv_priv_specs`
array from bfd/cpu-riscv.c instead.
Co-authored-by: Simon Cook <simon.cook@embecosm.com>
include/ChangeLog:
* dis-asm.h (disassembler_options_riscv): Declare.
opcodes/ChangeLog:
* riscv-dis.c (enum riscv_option_arg_t): New enum typedef.
(riscv_options): New static global.
(disassembler_options_riscv): New function.
(print_riscv_disassembler_options): Rewrite to use
disassembler_options_riscv.
Put bpf back in the 32-bit targets, even though bpf requires a 64-bit
bfd. bpf sim support apparently works without being 64-bit.
* Makefile.am (TARGET64_LIBOPCODES_CFILES): Move bpf files..
(TARGET32_LIBOPCODES_CFILES): ..to here.
* Makefile.in: Regenerate.
Reuse float instructions in INSN_CLASS_F/D/Q, use riscv_subset_supports to
verify if z*inx enabled and use gpr instead of fpr when z*inx is enable.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Added support for
z*inx extension.
gas/ChangeLog:
* config/tc-riscv.c (riscv_ip): Added register choice for z*inx.
include/ChangeLog:
* opcode/riscv.h (enum riscv_insn_class): Reused INSN_CLASS_* for z*inx.
opcodes/ChangeLog:
* riscv-dis.c (riscv_disassemble_insn): Added disassemble check for
z*inx.
* riscv-opc.c: Reused INSN_CLASS_* for z*inx.
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch is adding new SVE2 instructions added to support SME extension.
The following SVE2 instructions are added by the SME architecture:
* PSEL,
* REVD, SCLAMP and UCLAMP.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_pred_reg_with_index):
New parser.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-9-illegal.d: New test.
* testsuite/gas/aarch64/sme-9-illegal.l: New test.
* testsuite/gas/aarch64/sme-9-illegal.s: New test.
* testsuite/gas/aarch64/sme-9.d: New test.
* testsuite/gas/aarch64/sme-9.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_PnT_Wm_imm.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_pred_reg_with_index):
New inserter.
* aarch64-dis.c (aarch64_ext_sme_pred_reg_with_index):
New extractor.
* aarch64-opc.c (aarch64_print_operand): Printout of
OPND_SME_PnT_Wm_imm.
* aarch64-opc.h (enum aarch64_field_kind): New bitfields
FLD_SME_Rm, FLD_SME_i1, FLD_SME_tszh, FLD_SME_tszl.
* aarch64-tbl.h (OP_SVE_NN_BHSD): New qualifier.
(OP_SVE_QMQ): New qualifier.
(struct aarch64_opcode): New instructions PSEL, REVD,
SCLAMP and UCLAMP.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding miscellaneous SME related system registers.
gas/ChangeLog:
* testsuite/gas/aarch64/sme-sysreg.d: New test.
* testsuite/gas/aarch64/sme-sysreg.s: New test.
* testsuite/gas/aarch64/sme-sysreg-illegal.d: New test.
* testsuite/gas/aarch64/sme-sysreg-illegal.l: New test.
* testsuite/gas/aarch64/sme-sysreg-illegal.s: New test.
opcodes/ChangeLog:
* aarch64-opc.c: New system registers id_aa64smfr0_el1,
smcr_el1, smcr_el12, smcr_el2, smcr_el3, smpri_el1,
smprimap_el2, smidr_el1, tpidr2_el0 and mpamsm_el1.
This patch is adding new SME mode selection and state access instructions:
* Add SMSTART and SMSTOP instructions.
* Add SVCR system register.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_sm_za): New parser.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-8-illegal.d: New test.
* testsuite/gas/aarch64/sme-8-illegal.l: New test.
* testsuite/gas/aarch64/sme-8-illegal.s: New test.
* testsuite/gas/aarch64/sme-8.d: New test.
* testsuite/gas/aarch64/sme-8.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_SM_ZA.
(enum aarch64_insn_class): New instruction classes
sme_start and sme_stop.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_pstatefield): New inserter.
(aarch64_ins_sme_sm_za): New inserter.
* aarch64-dis.c (aarch64_ext_imm): New extractor.
(aarch64_ext_pstatefield): New extractor.
(aarch64_ext_sme_sm_za): New extractor.
* aarch64-opc.c (operand_general_constraint_met_p):
New pstatefield value for SME instructions.
(aarch64_print_operand): Printout for OPND_SME_SM_ZA.
(SR_SME): New register SVCR.
* aarch64-opc.h (F_REG_IN_CRM): New register endcoding.
* aarch64-opc.h (F_IMM_IN_CRM): New immediate endcoding.
(PSTATE_ENCODE_CRM): Encode CRm field.
(PSTATE_DECODE_CRM): Decode CRm field.
(PSTATE_ENCODE_CRM_IMM): Encode CRm immediate field.
(PSTATE_DECODE_CRM_IMM): Decode CRm immediate field.
(PSTATE_ENCODE_CRM_AND_IMM): Encode CRm and immediate
field.
* aarch64-tbl.h (struct aarch64_opcode): New SMSTART
and SMSTOP instructions.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new loads and stores defined by SME instructions.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_address): New parser.
(parse_sme_za_hv_tiles_operand_with_braces): New parser.
(parse_sme_za_array): New parser.
(output_operand_error_record): Print error details if
present.
(parse_operands): Support new operands.
* testsuite/gas/aarch64/sme-5-illegal.d: New test.
* testsuite/gas/aarch64/sme-5-illegal.l: New test.
* testsuite/gas/aarch64/sme-5-illegal.s: New test.
* testsuite/gas/aarch64/sme-5.d: New test.
* testsuite/gas/aarch64/sme-5.s: New test.
* testsuite/gas/aarch64/sme-6-illegal.d: New test.
* testsuite/gas/aarch64/sme-6-illegal.l: New test.
* testsuite/gas/aarch64/sme-6-illegal.s: New test.
* testsuite/gas/aarch64/sme-6.d: New test.
* testsuite/gas/aarch64/sme-6.s: New test.
* testsuite/gas/aarch64/sme-7-illegal.d: New test.
* testsuite/gas/aarch64/sme-7-illegal.l: New test.
* testsuite/gas/aarch64/sme-7-illegal.s: New test.
* testsuite/gas/aarch64/sme-7.d: New test.
* testsuite/gas/aarch64/sme-7.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operands.
(enum aarch64_insn_class): Added sme_ldr and sme_str.
(AARCH64_OPDE_UNTIED_IMMS): New operand error kind.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_za_hv_tiles): New inserter.
(aarch64_ins_sme_za_list): New inserter.
(aarch64_ins_sme_za_array): New inserter.
(aarch64_ins_sme_addr_ri_u4xvl): New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): Added
ins_sme_za_list, ins_sme_za_array and ins_sme_addr_ri_u4xvl.
* aarch64-dis.c (aarch64_ext_sme_za_hv_tiles): New extractor.
(aarch64_ext_sme_za_list): New extractor.
(aarch64_ext_sme_za_array): New extractor.
(aarch64_ext_sme_addr_ri_u4xvl): New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): Added
ext_sme_za_list, ext_sme_za_array and ext_sme_addr_ri_u4xvl.
* aarch64-opc.c (operand_general_constraint_met_p):
(aarch64_match_operands_constraint): Handle sme_ldr, sme_str
and sme_misc.
(aarch64_print_operand): New operands supported.
* aarch64-tbl.h (OP_SVE_QUU): New qualifier.
(OP_SVE_QZU): New qualifier.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding ZERO (a list of 64-bit element ZA tiles)
instruction.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_list_of_64bit_tiles):
New parser.
(parse_operands): Handle OPND_SME_list_of_64bit_tiles.
* testsuite/gas/aarch64/sme-4-illegal.d: New test.
* testsuite/gas/aarch64/sme-4-illegal.l: New test.
* testsuite/gas/aarch64/sme-4-illegal.s: New test.
* testsuite/gas/aarch64/sme-4.d: New test.
* testsuite/gas/aarch64/sme-4.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_list_of_64bit_tiles.
opcodes/ChangeLog:
* aarch64-opc.c (print_sme_za_list): New printing function.
(aarch64_print_operand): Handle OPND_SME_list_of_64bit_tiles.
* aarch64-opc.h (enum aarch64_field_kind): New bitfield
FLD_SME_zero_mask.
* aarch64-tbl.h (struct aarch64_opcode): New ZERO instruction.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new MOV (alias) and MOVA SME instruction.
gas/ChangeLog:
* config/tc-aarch64.c (enum sme_hv_slice): new enum.
(struct reloc_entry): Added ZAH and ZAV registers.
(parse_sme_immediate): Immediate parser.
(parse_sme_za_hv_tiles_operand): ZA tile parser.
(parse_sme_za_hv_tiles_operand_index): Index parser.
(parse_operands): Added ZA tile parser calls.
(REGNUMS): New macro. Regs with suffix.
(REGSET16S): New macro. 16 regs with suffix.
* testsuite/gas/aarch64/sme-2-illegal.d: New test.
* testsuite/gas/aarch64/sme-2-illegal.l: New test.
* testsuite/gas/aarch64/sme-2-illegal.s: New test.
* testsuite/gas/aarch64/sme-2.d: New test.
* testsuite/gas/aarch64/sme-2.s: New test.
* testsuite/gas/aarch64/sme-2a.d: New test.
* testsuite/gas/aarch64/sme-2a.s: New test.
* testsuite/gas/aarch64/sme-3-illegal.d: New test.
* testsuite/gas/aarch64/sme-3-illegal.l: New test.
* testsuite/gas/aarch64/sme-3-illegal.s: New test.
* testsuite/gas/aarch64/sme-3.d: New test.
* testsuite/gas/aarch64/sme-3.s: New test.
* testsuite/gas/aarch64/sme-3a.d: New test.
* testsuite/gas/aarch64/sme-3a.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New enums
AARCH64_OPND_SME_ZA_HV_idx_src and
AARCH64_OPND_SME_ZA_HV_idx_dest.
(struct aarch64_opnd_info): New ZA tile vector struct.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_za_hv_tiles):
New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER):
New inserter ins_sme_za_hv_tiles.
* aarch64-dis.c (aarch64_ext_sme_za_hv_tiles):
New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR):
New extractor ext_sme_za_hv_tiles.
* aarch64-opc.c (aarch64_print_operand):
Handle SME_ZA_HV_idx_src and SME_ZA_HV_idx_dest.
* aarch64-opc.h (enum aarch64_field_kind): New enums
FLD_SME_size_10, FLD_SME_Q, FLD_SME_V and FLD_SME_Rv.
(struct aarch64_operand): Increase fields size to 5.
* aarch64-tbl.h (OP_SME_BHSDQ_PM_BHSDQ): New qualifiers
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
Patch is adding new SME matrix instructions. Please note additional
instructions will be added in following patches.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_zada_operand):
New parser.
* config/tc-aarch64.c (parse_reg_with_qual):
New reg parser.
* config/tc-aarch64.c (R_ZA): New egister type.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-illegal.d: New test.
* testsuite/gas/aarch64/sme-illegal.l: New test.
* testsuite/gas/aarch64/sme-illegal.s: New test.
* testsuite/gas/aarch64/sme.d: New test.
* testsuite/gas/aarch64/sme.s: New test.
* testsuite/gas/aarch64/sme-f64.d: New test.
* testsuite/gas/aarch64/sme-f64.s: New test.
* testsuite/gas/aarch64/sme-i64.d: New test.
* testsuite/gas/aarch64/sme-i64.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operands
AARCH64_OPND_SME_ZAda_2b, AARCH64_OPND_SME_ZAda_3b and
AARCH64_OPND_SME_Pm.
(enum aarch64_insn_class): New instruction class sme_misc.
opcodes/ChangeLog:
* aarch64-opc.c (aarch64_print_operand):
Print OPND_SME_ZAda_2b and OPND_SME_ZAda_3b operands.
(verify_constraints): Handle OPND_SME_Pm.
* aarch64-opc.h (enum aarch64_field_kind):
New bit fields FLD_SME_ZAda_2b, FLD_SME_ZAda_3b and FLD_SME_Pm.
* aarch64-tbl.h (OP_SME_ZADA_PN_PM_ZN_S): New qualifier set.
(OP_SME_ZADA_PN_PM_ZN_D): New qualifier.
(OP_SME_ZADA_PN_PM_ZN_ZM): New qualifier.
(OP_SME_ZADA_S_PM_PM_S_S): New qualifier.
(OP_SME_ZADA_D_PM_PM_D_D): New qualifier.
(OP_SME_ZADA_S_PM_PM_H_H): New qualifier.
(OP_SME_ZADA_S_PM_PM_B_B): New qualifier.
(OP_SME_ZADA_D_PM_PM_H_H): New qualifier.
(SME_INSN): New instruction macro.
(SME_F64_INSN): New instruction macro.
(SME_I64_INSN): New instruction macro.
(SME_INSNC): New instruction macro.
(struct aarch64_opcode): New SME instructions.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This series of patches (tagged [SME]) add support for the Scalable
Matrix Extension. Patch introduces new command line options: +sme, +sme-f64 and
+sme-i64 to -march command line options.
gas/ChangeLog:
* NEWS: Updated docs.
* config/tc-aarch64.c: New SME command line options.
* doc/c-aarch64.texi: Update docs.
include/ChangeLog:
* opcode/aarch64.h (AARCH64_FEATURE_SME): New flag.
(AARCH64_FEATURE_SME_F64): New flag.
(AARCH64_FEATURE_SME_I64): New flag.
opcodes/ChangeLog:
* aarch64-tbl.h (SME): New feature object.
2021-11-17 Jim Wilson <jimw@sifive.com>
Kito Cheng <kito.cheng@sifive.com>
Nelson Chu <nelson.chu@sifive.com>
This patch is porting from the following riscv github,
https://github.com/riscv/riscv-binutils-gdb/tree/rvv-1.0.x
And here is the vector spec,
https://github.com/riscv/riscv-v-spec
bfd/
* elfxx-riscv.c (riscv_implicit_subsets): Added imply rules
of v, zve and zvl extensions.
(riscv_supported_std_ext): Updated verison of v to 1.0.
(riscv_supported_std_z_ext): Added zve and zvl extensions.
(riscv_parse_check_conflicts): The zvl extensions need to
enable either v or zve extension.
(riscv_multi_subset_supports): Check the subset list to know
if the INSN_CLASS_V and INSN_CLASS_ZVEF instructions are supported.
gas/
* config/tc-riscv.c (enum riscv_csr_class): Added CSR_CLASS_V.
(enum reg_class): Added RCLASS_VECR and RCLASS_VECM.
(validate_riscv_insn): Check whether the rvv operands are valid.
(md_begin): Initialize register hash for rvv registers.
(macro_build): Added rvv operands when expanding rvv pseudoes.
(vector_macro): Expand rvv macros into one or more instructions.
(macro): Likewise.
(my_getVsetvliExpression): Similar to my_getVsetvliExpression,
but used for parsing vsetvli operands.
(riscv_ip): Parse and encode rvv operands. Besides, The rvv loads
and stores with EEW 64 cannot be used when zve32x is enabled.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Updated -march
to rv32ifv_zkr.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg.s: Added rvv csr testcases.
* testsuite/gas/riscv/priv-reg-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/march-imply-v.d: New testcase.
* testsuite/gas/riscv/vector-insns-fail-zve32xf.d: Likewise.
* testsuite/gas/riscv/vector-insns-fail-zve32xf.l: Likewise.
* testsuite/gas/riscv/vector-insns-fail-zvl.d: Likewise.
* testsuite/gas/riscv/vector-insns-fail-zvl.l: Likewise.
* testsuite/gas/riscv/vector-insns-vmsgtvx.d: Likewise.
* testsuite/gas/riscv/vector-insns-vmsgtvx.s: Likewise.
* testsuite/gas/riscv/vector-insns-zero-imm.d: Likewise.
* testsuite/gas/riscv/vector-insns-zero-imm.s: Likewise.
* testsuite/gas/riscv/vector-insns.d: Likewise.
* testsuite/gas/riscv/vector-insns.s: Likewise.
include/
* opcode/riscv-opc.h: Defined mask/match encodings and csrs for rvv.
* opcode/riscv.h: Defined rvv immediate encodings and fields.
(enum riscv_insn_class): Added INSN_CLASS_V and INSN_CLASS_ZVEF.
(INSN_V_EEW64): Defined.
(M_VMSGE, M_VMSGEU): Added for the rvv pseudoes.
opcodes/
* riscv-dis.c (print_insn_args): Dump the rvv operands.
* riscv-opc.c (riscv_vecr_names_numeric): Defined rvv registers.
(riscv_vecm_names_numeric): Likewise.
(riscv_vsew): Likewise.
(riscv_vlmul): Likewise.
(riscv_vta): Likewise.
(riscv_vma): Likewise.
(match_vs1_eq_vs2): Added for rvv Vu operand.
(match_vd_eq_vs1_eq_vs2): Added for rvv Vv operand.
(riscv_opcodes): Added rvv v1.0 instructions.
Add instructions in k-ext, some instruction in zbkb, zbkc is reuse from
zbb,zbc, we just change the class attribute to make them both support.
The 'aes64ks1i' and 'aes64ks2' instructions are present in both the Zknd
and Zkne extensions on rv64. Add new operand letter 'y' to present 'bs'
symbol and 'Y' to present 'rnum' symbolc for zkn instructions. Also add
a new Entropy Source CSR define 'seed' located at address 0x015.
bfd/
* elfxx-riscv.c (riscv_multi_subset_supports): Added support for
crypto extension.
gas/
*config/tc-riscv.c (enum riscv_csr_class): Added CSR_CLASS_ZKR.
(riscv_csr_address): Checked for CSR_CLASS_ZKR.
(validate_riscv_insn): Added y and Y for bs and rnum operands.
(riscv_ip): Handle y and Y operands.
include/
* opcode/riscv-opc.h: Added encodings of crypto instructions.
Also defined new csr seed, which address is 0x15.
* opcode/riscv.h: Defined OP_* and INSN_CLASS_* for crypto.
opcodes/
* riscv-dis.c (print_insn_args): Recognized new y and Y operands.
* riscv-opc.c (riscv_opcodes): Added crypto instructions.
For now we should always generate the elf architecture attribute both for
elf and linux toolchains, so that we could dump the objects correctly
according to the generated architecture string. This patch resolves the
problem that we probably dump an object with c.nop instructions, but
in fact the c extension isn't allowed. Consider the following case,
nelson@LAPTOP-QFSGI1F2:~/test$ cat temp.s
.option norvc
.option norelax
.text
add a0, a0, a0
.byte 0x1
.balign 16
nelson@LAPTOP-QFSGI1F2:~/test$ ~/binutils-dev/build-elf32-upstream/build-install/bin/riscv32-unknown-elf-as temp.s -o temp.o
nelson@LAPTOP-QFSGI1F2:~/test$ ~/binutils-dev/build-elf32-upstream/build-install/bin/riscv32-unknown-elf-objdump -d temp.o
temp.o: file format elf32-littleriscv
Disassembly of section .text:
00000000 <.text>:
0: 00a50533 add a0,a0,a0
4: 01 .byte 0x01
5: 00 .byte 0x00
6: 0001 nop
8: 00000013 nop
c: 00000013 nop
nelson@LAPTOP-QFSGI1F2:~/test$ ~/binutils-dev/build-elf32-upstream/build-install/bin/riscv32-unknown-elf-readelf -A temp.o
Attribute Section: riscv
File Attributes
Tag_RISCV_arch: "rv32i2p0_m2p0_a2p0_f2p0_d2p0"
The c.nop at address 0x6 is generated for alignment, but since the rvc isn't
allowed for this object, dump it as a c.nop instruction looks wrong. After
applying this patch, I get the following result,
nelson@LAPTOP-QFSGI1F2:~/test$ ~/binutils-dev/build-elf32-upstream/build-install/bin/riscv32-unknown-elf-objdump -d temp.o
temp.o: file format elf32-littleriscv
Disassembly of section .text:
00000000 <.text>:
0: 00a50533 add a0,a0,a0
4: 01 .byte 0x01
5: 00 .byte 0x00
6: 0001 .2byte 0x1
8: 00000013 nop
c: 00000013 nop
For the current objdump, we dump data to .byte/.short/.word/.dword, and
dump the unknown or unsupported instructions to .2byte/.4byte/.8byte, which
respectively are 2, 4 and 8 bytes instructions. Therefore, we shouldn't
dump the 0x0001 as a c.nop instruction in the above case, we should dump
it to .2byte 0x1 as a unknown instruction, since the rvc is disabled.
However, consider that some people may use the new objdump to dump the old
objects, which don't have any elf attributes. We usually set the default
architecture string to rv64g by bfd/elfxx-riscv.c:riscv_set_default_arch.
But this will cause rvc instructions to be unrecognized. Therefore, we
set the default architecture string to rv64gc for disassembler, to keep
the previous behavior.
This patch pass the riscv-gnu-toolchain gcc/binutils regressions for
rv32emc-elf, rv32gc-linux, rv32i-elf, rv64gc-elf and rv64gc-linux
toolchains. Also, tested by --enable-targets=all and can build
riscv-gdb successfully.
bfd/
* elfnn-riscv.c (riscv_merge_arch_attr_info): Tidy the
codes for riscv_parse_subset_t setting.
* elfxx-riscv.c (riscv_get_default_ext_version): Updated.
(riscv_subset_supports): Moved from gas/config/tc-riscv.c.
(riscv_multi_subset_supports): Likewise.
* elfxx-riscv.h: Added extern for riscv_subset_supports and
riscv_multi_subset_supports.
gas/
* config/tc-riscv.c (riscv_subset_supports): Moved to
bfd/elfxx-riscv.c.
(riscv_multi_subset_supports): Likewise.
(riscv_rps_as): Defined for architectrue parser.
(riscv_set_arch): Updated.
(riscv_set_abi_by_arch): Likewise.
(riscv_csr_address): Likewise.
(reg_lookup_internal): Likewise.
(riscv_ip): Likewise.
(s_riscv_option): Updated.
* testsuite/gas/riscv/mapping-04b.d: Updated.
* testsuite/gas/riscv/mapping-norelax-03b.d: Likewise.
* testsuite/gas/riscv/mapping-norelax-04b.d: Likewise.
opcodes/
* riscv-dis.c: Include elfxx-riscv.h since we need the
architecture parser. Also removed the cpu-riscv.h, it
is already included in elfxx-riscv.h.
(default_isa_spec): Defined since the parser need this
to set the default architecture string.
(xlen): Moved out from riscv_disassemble_insn as a global
variable, it is more convenient to initialize riscv_rps_dis.
(riscv_subsets): Defined to recoed the supported
extensions.
(riscv_rps_dis): Defined for architectrue parser.
(riscv_disassemble_insn): Call riscv_multi_subset_supports
to make sure if the instructions are valid or not.
(print_insn_riscv): Initialize the riscv_subsets by parsing
the elf architectrue attribute. Otherwise, set the default
architectrue string to rv64gc.
This file doesn't use anything from bfd (sysdep.h), so drop that
include. This avoids an implicit dependency on the generated
config.h which can be problematic for build-time tools.
Also swap stdio.h for stddef.h. This file isn't doing or using
any I/O structures, but it does need NULL.
Tidy the gas/config/tc-riscv.c and opcodes/riscv-dis.c, to prepare for
moving the released extensions (including released vendor extensions)
from integration branch back to mainline.
* Added parts of missing comments.
* Updated md_show_usage.
* For validate_riscv_insn, riscv_ip and print_insn_args, unify the
following pointer names,
- oparg: pointed to the parsed operand defined in the riscv_opcodes.
- asarg: pointed to the parsed operand from assembly.
- opargStart: recorded the parsed operand name from riscv_opcodes.
- asargStart: recorded the parsed operand name from assembly.
gas/
* config/tc-riscv.c: Added parts of missind comments and updated
the md_show_usage.
(riscv_multi_subset_supports): Tidy codes.
(validate_riscv_insn): Unify the pointer names, oparg, asarg,
opargStart and asargStart, to prepare for moving the released
extensions from integration branch back to mainline.
(riscv_ip): Likewise.
(macro_build): Added fmtStart, also used to prepare for moving
released extensions.
(md_show_usage): Added missing descriptions for new options.
opcodes/
* riscv-dis.c (print_insn_args): Unify the pointer names,
oparg and opargStart, to prepare for moving the released
extensions from integration branch back to mainline.
If built as a shared library, libopcodes has a load-time dependency on
libbfd, which is recorded in the dynamic section, however without a
corresponding RPATH entry for the directory to find libbfd in. This
causes loading to fail whenever libbfd is only pulled by libopcodes
indirectly and libbfd has been installed in a directory that is not in
the dynamic loader's search path.
It does not happen with the programs included with binutils or GDB,
because they all also pull libbfd when using libopcodes, but it can
happen with external software, e.g.:
$ gdbserver --help
gdbserver: error while loading shared libraries: libbfd-[...].so: cannot open shared object file: No such file or directory
$
(not our `gdbserver').
Indirect dynamic dependencies are handled by libtool automatically by
adding RPATH entries as required, however our setup for libopcodes
prevents this from happening by linking in libbfd with an explicit file
reference sneaked through to the linker directly behind libtool's back
via the `-Wl' linker command-line option rather than via `-l' combined
with a suitable library search path specified via `-L', as it would be
usually the case, or just referring to the relevant .la file in a fully
libtool-enabled configuration such as ours.
According to an observation in the discussion back in 2007[1][2][3] that
has led to the current arrangement it is to prevent libtool from picking
up the wrong version of libbfd. It does not appear to be needed though,
not at least with our current libtool incarnation, as directly referring
`libbfd.la' does exactly what it should, as previously suggested[4], and
with no link-time reference to the installation directory other than to
set RPATH. Uninstalled version of libopcodes has libbfd's build-time
location prepended to RPATH too, as also expected.
Use a direct reference to `libbfd.la' then, making the load error quoted
above go away. Alternatively `-L' and `-l' could be used to the same
effect, but it seems an unnecessary complication and just another way to
circumvent rather than making use of libtool.
References:
[1] "compile failure due to undefined symbol",
<https://sourceware.org/ml/binutils/2007-08/msg00476.html>
[2] same, <https://sourceware.org/ml/binutils/2007-09/msg00000.html>
[3] same, <https://sourceware.org/ml/binutils/2007-10/msg00019.html>
[4] same, <https://sourceware.org/ml/binutils/2007-10/msg00034.html>
opcodes/
* Makefile.am: Remove obsolete comment.
* configure.ac: Refer `libbfd.la' to link shared BFD library
except for Cygwin.
* Makefile.in: Regenerate.
* configure: Regenerate.
If a call to the read_memory_func fails then we should call the
memory_error_func to notify the user of the disassembler of the
address that was a problem.
Without this GDB will report all memory errors as being at address
0x0.
opcodes/ChangeLog:
* z80-dis.c (fetch_data): Call memory_error_func if the
read_memory_func call fails.
If a call to the read_memory_func fails then we should call the
memory_error_func to notify the user of the disassembler of the
address that was a problem.
Without this GDB will report all memory errors as being at address
0x0.
opcodes/ChangeLog:
* s12z-disc.c (abstract_read_memory): Call memory_error_func if
the read_memory_func call fails.
Add aliases for the non-immediate mnemonics of b{set,clr,inv,ext} to
yencode the respective immediate insn b{set,clr,inv,ext}i when the
second source operand is an immediate.
2021-01-11 Philipp Tomsich <philipp.tomsich@vrull.eu>
gas/
* testsuite/gas/riscv/b-ext.d: Add tests.
* testsuite/gas/riscv/b-ext.s: Likewise.
* testsuite/gas/riscv/b-ext-64.d: Likewise.
* testsuite/gas/riscv/b-ext-64.s: Likewise.
opcodes/
* riscv-opc.c (riscv_opcodes): Add aliases for Zbs.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
The Zb[abc] opcodes are bundled just below the Privileged opcodes in
riscv_opcodes, possibly giving the appearance that they are part of
the Privileged spec for an uninitiated reader. This separates them
out and adds comments above each section to clearly identify them as
Zba, Zbb or Zbc opcodes.
2021-10-04 Philipp Tomsich <philipp.tomsich@vrull.eu>
opcodes/
* riscv-opc.c: Split of Zb[abc] instructions and add comments.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Don't print broadcast for scalar_mode, and print {bad} for invalid broadcast.
gas/
PR binutils/28381
* testsuite/gas/i386/bad-bcast.s: Add a new testcase.
* testsuite/gas/i386/bad-bcast.d: Likewise.
* testsuite/gas/i386/bad-bcast-intel.d: New.
opcodes/
PR binutils/28381
* i386-dis.c (static struct): Add no_broadcast.
(OP_E_memory): Mark invalid broadcast with no_broadcast=1 and Print "{bad}"for it.
(intel_operand_size): mark invalid broadcast with no_broadcast=1.
(OP_XMM): Mark scalar_mode with no_broadcast=1.
