After the previous commit that imported libbacktrace from gcc, this
commit updates src-release.sh so that the libbacktrace directory is
included in the gdb release tar file.
ChangeLog:
* src-release.sh (GDB_SUPPPORT_DIRS): Add libbacktrace.
Libtool needs to get BSD-format (or MS-format) output out of the system
nm, so that it can scan generated object files for symbol names for
-export-symbols-regex support. Some nms need specific flags to turn on
BSD-formatted output, so libtool checks for this in its AC_PATH_NM.
Unfortunately the code to do this has a pair of interlocking flaws:
- it runs the test by doing an nm of /dev/null. Some platforms
reasonably refuse to do an nm on a device file, but before now this
has only been worked around by assuming that the error message has a
specific textual form emitted by Tru64 nm, and that getting this
error means this is Tru64 nm and that nm -B would work to produce
BSD-format output, even though the test never actually got anything
but an error message out of nm -B. This is fixable by nm'ing *nm
itself* (since we necessarily have a path to it).
- the test is entirely skipped if NM is set in the environment, on the
grounds that the user has overridden the test: but the user cannot
reasonably be expected to know that libtool wants not only nm but
also flags forcing BSD-format output. Worse yet, one such "user" is
the top-level Cygnus configure script, which neither tests for
nor specifies any BSD-format flags. So platforms needing BSD-format
flags always fail to set them when run in a Cygnus tree, breaking
-export-symbols-regex on such platforms. Libtool also needs to
augment $LD on some platforms, but this is done unconditionally,
augmenting whatever the user specified: the nm check should do the
same.
One wrinkle: if the user has overridden $NM, a path might have been
provided: so we use the user-specified path if there was one, and
otherwise do the path search as usual. (If the nm specified doesn't
work, this might lead to a few extra pointless path searches -- but
the test is going to fail anyway, so that's not a problem.)
(Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a
symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where
*that* is a symlink to /usr/bin/nm.)
ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
PR libctf/27967
* libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided
NM, if there is one. Run nm on itself, not on /dev/null, to avoid
errors from nms that refuse to work on non-regular files. Remove
other workarounds for this problem. Strip out blank lines from the
nm output.
This reports common symbols like GNU nm, via a type code of 'C'.
ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
PR libctf/27967
* libtool.m4 (lt_cv_sys_global_symbol_pipe): Augment symcode for
Solaris 11.
Complement commit 6999161a2a ("Move readline to the readline/readline
subdirectory") and update the path to readline config.{sub,guess} files
documented in MAINTAINERS.
* MAINTAINERS: Update path to readline config.{sub,guess} files.
Complement commit ae52f48306 ("Add MIPS r3 and r5 support.") and get
changes for config.sub to recognize MIPS CPU patterns for the R3 and R5
ISA levels, used by GAS to set defaults in gas/configure.ac. Oddly, R6
ISA support has been correctly added already.
/
* config.guess: Import from upstream.
* config.sub: Likewise.
readline/
* readline/support/config.guess: Import from upstream.
* readline/support/config.sub: Likewise.
We're going to start using gnulib in the sim, so make sure it exists.
ChangeLog:
* Makefile.def: Add configure-sim dependency on all-gnulib.
* Makefile.in: Regenerated.
This stops problems parallel-installing if a relink of libctf is needed.
Also adds corresponding install-strip dependencies.
ChangeLog
2021-03-18 Nick Alcock <nick.alcock@oracle.com>
PR libctf/27482
* Makefile.def: Add install-bfd dependencies for install-libctf and
install-ld, and install-strip-bfd dependencies for
install-strip-libctf and install-strip-ld; move the install-ld
dependency on install-libctf to join it.
* Makefile.in: Regenerated.
I'm not entirely sure why this is here since the sim doesn't use
anything from the gdb/ dir directly, and the commit that added it
included a bunch more changes and doesn't seem to call out this
dep specifically.
Update Makefile.tpl to add missing changes in
commit af019bfde9
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Sat Jan 9 06:51:15 2021 -0800
Support the PGO build for binutils+gdb
"autogen Makefile.def" showed no changes in Makefile.in.
PR binutils/26766
* Makefile.tpl (PGO_BUILD_TRAINING_FLAGS_TO_PASS): Add
PGO_BUILD_TRAINING=yes.
(PGO_BUILD_TRAINING_MFLAGS): New.
(all): Pass $(PGO_BUILD_TRAINING_MFLAGS) to the PGO build.
Since ld may depend on libctf (if present), and libctf may be relinked
by the installation process, libctf must be installed before ld is,
or the relink may fail if it calls on symbols or symbol versions that do
not exist in any libctf already present on the system. (If none is
present, the copy in the build tree will be automatically used, but
if one *is* present, it may take precedence and break things.)
(This is a maybe- dependency, so it will work even if libctf is
disabled.)
ChangeLog
2021-01-26 Nick Alcock <nick.alcock@oracle.com>
PR 27250
* Makefile.def: Add install-libctf dependency to install-ld.
* Makefile.in: Regenerated.
The indentation of the body of the nested statements got out of sync
leading to the entire function being indented incorrectly and looking
like it's part of the for loop.
Check if AR is usable for LTO build with --enable-pgo-build=lto:
checking for -plugin option... ar: no operation specified
Failed: ar --plugin /usr/gcc-11.0.0-x32/libexec/gcc/x86_64-pc-linux-gnu/11.0.0/liblto_plugin.so rc
no
configure: error: AR with --plugin and rc is required for LTO build
instead of build failure later.
PR binutils/26766
* configure.ac:
* configure: Regenerated.
AR from older binutils doesn't work with --plugin and rc:
[hjl@gnu-cfl-2 bin]$ touch foo.c
[hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
[hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
./ar: no operation specified
[hjl@gnu-cfl-2 bin]$ ./ar --version
GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112
Copyright (C) 2018 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License version 3 or (at your option) any later version.
This program has absolutely no warranty.
[hjl@gnu-cfl-2 bin]$
Check if AR works with --plugin and rc before passing --plugin to AR and
RANLIB.
PR ld/27173
* configure: Regenerated.
* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with
--plugin and rc before enabling --plugin.
config/
PR ld/27173
* gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with
--plugin and rc before enabling --plugin.
libiberty/
PR ld/27173
* configure: Regenerated.
zlib/
PR ld/27173
* configure: Regenerated.
Add the --enable-pgo-build[=lto] configure option. When binutils+gdb
is not built together with GCC, --enable-pgo-build enables the PGO build:
1. First build with -fprofile-generate.
2. Use "make maybe-check-*" to generate profiling data and pass -i to make
to ignore errors when generating profiling data.
3. Use "make clean" to remove the previous build.
4. Rebuild with -fprofile-use.
With --enable-pgo-build=lto, -flto=jobserver -ffat-lto-objects are used
together with -fprofile-generate and -fprofile-use. Add '+' to the command
line for recursive make to support -flto=jobserver -ffat-lto-objects.
NB: --enable-pgo-build=lto enables the PGO build with LTO while
--enable-lto enables LTO support in toolchain.
PR binutils/26766
* Makefile.tpl (BUILD_CFLAGS): New.
(CFLAGS): Append $(BUILD_CFLAGS).
(CXXFLAGS): Likewise.
(PGO_BUILD_GEN_FLAGS_TO_PASS): New.
(PGO_BUILD_TRAINING_CFLAGS): Likewise.
(PGO_BUILD_TRAINING_CXXFLAGS): Likewise.
(PGO_BUILD_TRAINING_FLAGS_TO_PASS): Likewise.
(PGO_BUILD_TRAINING_MFLAGS): Likewise.
(PGO_BUILD_USE_FLAGS_TO_PASS): Likewise.
(PGO-TRAINING-TARGETS): Likewise.
(PGO_BUILD_TRAINING): Likewise.
(all): Add '+' to the command line for recursive make. Support
the PGO build.
* configure.ac: Add --enable-pgo-build[=lto].
AC_SUBST PGO_BUILD_GEN_CFLAGS, PGO_BUILD_USE_CFLAGS and
PGO_BUILD_LTO_CFLAGS. Enable the PGO build in Makefile.
* Makefile.in: Regenerated.
* configure: Likewise.
$ ./config.sub powerpc-eabivle
Invalid configuration `powerpc-eabivle': OS `eabivle' not recognized
$ ./config.sub powerpc-unknown-eabivle
Invalid configuration `powerpc-unknown-eabivle': OS `eabivle' not recognized
Also powerpc-eabisim and probably some arm configurations.
* config.sub: Accept OS of eabi* and gnueabi*.
This introduces a new lookup testsuite under libctf, which operates by
compiling (with libtool) a "lookup" .c file that uses libctf to analyze
some other program, then compiling some number of test object files with
CTF and optionally linking them together and running the lookup program
on the test object files (or linked test binary), before diffing the
result much as run_dump_test does.
This lets us test the portions of libctf that are not previously
testable, notably the portions that do lookup on linked output and
that create dynamic dictionaries and then do lookup on them before
writing them out, something that is not tested by the ld-ctf testsuite
because the linker never does this.
A couple of simple tests are added: one testing the functionality of
enum lookups, and one testing that the recently-added commit adding
extra paranoia to incomplete type handling doesn't break linking and
that the result of the link is an (otherwise-impossible) array of
forward type in the shared CTF dict.
ChangeLog
2021-01-05 Nick Alcock <nick.alcock@oracle.com>
* Makefile.def (libctf): No longer no_check. Checking depends on
all-ld.
* Makefile.in: Regenerated.
libctf/ChangeLog
2021-01-05 Nick Alcock <nick.alcock@oracle.com>
* Makefile.am (EXPECT): New.
(RUNTEST): Likewise.
(RUNTESTFLAGS): Likewise.
(CC_FOR_TARGET): Likewise.
(check-DEJAGNU): Likewise.
(AUTOMAKE_OPTIONS): Add dejagnu.
* Makefile.in: Regenerated.
* testsuite/config/default.exp: New.
* testsuite/lib/ctf-lib.exp: Likewise.
* testsuite/libctf-lookup/enum.lk: New test.
* testsuite/libctf-lookup/enum-ctf.c: New CTF input.
* testsuite/libctf-lookup/enum.c: New lookup test.
* testsuite/libctf-lookup/ambiguous-struct*.c: New test.
* testsuite/libctf-lookup/lookup.exp: New.
Prints progress like:
Downloading 4.89 MB separate debug info for /usr/lib64/libgcrypt.so.20.
Downloading 1.10 MB separate debug info for /usr/lib64/liblzma.so.5.
Downloading 1.31 MB separate debug info for /usr/lib64/liblz4.so.1.
Downloading 0.96 MB separate debug info for /usr/lib64/libsmime3.so.
[### ]
Tested on x86_64-linux.
ChangeLog:
2020-12-16 Martin Liska <mliska@suse.cz>
Tom de Vries <tdevries@suse.de>
* gdb/debuginfod-support.c (struct user_data): Remove has_printed
field. Add meter field.
(progressfn): Print progress using meter.
GNU Global outputs can be safely ignored.
ChangeLog:
2020-12-02 Enze Li <lienze2010@hotmail.com>
* .gitignore: Add gnu global outputs.
Change-Id: I04ce68ab3279426195793adb56f834a34ee72ea2
Bring in a few lines that are in gcc's .gitignore but not binutils-gdb's
.gitignore.
ChangeLog:
* .gitignore: Sync with gcc.
Change-Id: I8900ddfbb5ab8cce6236e1905fdbb52fb4c291e2
I just came across the GDB 10.1 release notes and saw that md5 is still
being used in those. I thought it would be a good idea to instead have a
more modern, secure and wildly available hash function such as SHA256 as
part of the release process.
The changes have been done rather mechnically via sed but executing the
`src-release.sh -b gdb` did work so I am confident about the result.
While this does not directly address the release mails, I was wasn't
able to find the template/script used for those, this is probably still
an improvement.
ChangeLog:
* src-release.sh: Use sha256sum instead of md5sum.
binutils/ChangeLog:
* README-how-to-make-a-release: Use sha256sum instead of md5sum.
Change-Id: I9cf19ea40699137c45463b8514f6e29271af2347
After commit:
commit 361cb21935
Date: Tue Oct 6 10:09:06 2020 +0100
gnulib: Ensure all libraries are used when building gdb/gdbserver
We now get an error when, at the top level of the build tree, we do
'make distclean'.
The reason for this is that the gnulib directory is cleaned before the
gdb directory, cleaning gnulib deletes Makefile.gnulib.inc from the
gnulib build directory, which is currently pulled in by the gdb
Makefile.in using 'include'.
This commit adds a dependency between distclean-gnulib and both
distclean-gdb and distclean-gdbserver. This means that gdb and
gdbserver will be cleaned before gnulib, as a result the
Makefile.gnulib.inc file should exist when needed.
ChangeLog:
* Makefile.in: Rebuild.
* Makefile.def: Make distclean-gnulib depend on distclean-gdb and
distclean-gdbserver.
It is quite normal to have headers without library on multilib OSes.
Add AC_TRY_LINK to PKG_CHECK_MODULES to check if $pkg_cv_[]$1[]_LIBS
works.
config/
PR binutils/26301
* pkg.m4 (PKG_CHECK_MODULES): Add AC_TRY_LINK to check if
$pkg_cv_[]$1[]_LIBS works.
binutils/
PR binutils/26301
* configure: Regenerated.
gdb/
PR binutils/26301
* configure: Regenerated.
This changes the gdbserver build to use the gdbsupport that was built
for gdb.
gdbserver and gdbreplay now must use WIN32APILIBS (aka -lws2_32).
Before this change, gdbserver did not define USE_WIN32API when
building gdbsupport, but now this is always done.
ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* Makefile.in: Rebuild.
* Makefile.def (gdbserver): Depend on gdbsupport.
gdbserver/ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac (GDBSERVER_DEPFILES): Remove srv_selftest_objs.
(WIN32APILIBS): New subst.
* Makefile.in (SFILES, OBS, TAGS, GDBREPLAY_OBS): Remove
gdbsupport files.
(gdbsupport/%.o): Remove target.
(GDBSUPPORT_BUILDDIR, GDBSUPPORT): New variables.
(gdbserver$(EXEEXT), gdbreplay$(EXEEXT)): Add GDBSUPPORT.
(WIN32APILIBS): New variable.
(gdbserver$(EXEEXT)): Add WIN32APILIBS.
(gdbreplay$(EXEEXT)): Likewise.
This changes gdbsupport so that it no longer relies on BFD. This is a
precursor to making gdbserver use the already-built gdbsupport,
because building gdbserver should not require BFD to be built.
The most notable change here is that CORE_ADDR is always a 64-bit
type. This makes it so that gdb acts as if it were always built in
64-bit mode.
ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* Makefile.in: Rebuild.
* Makefile.def (gdbsupport): Don't depend on bfd.
gdbsupport/ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* common-types.h: Remove GDBSERVER code.
(gdb_byte, CORE_ADDR, LONGEST, ULONGEST): Redefine.
* common-defs.h: Remove GDBSERVER code.
gdbserver uses gdb's alloc.c, and this in turn can include headers
from intl via gdbsupport/gdb_locale.h. This can cause build failures
in some situations, for example if you build gdb and gdbserver on
mingw.
This patch restores the gdbsupport dependency on intl, and changes
gdbserver to use ZW_GNU_GETTEXT_SISTER_DIR. This fixes this build
problem.
ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* Makefile.in: Rebuild.
* Makefile.def (gdbsupport): Depend on intl.
gdbserver/ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* config.in, configure: Rebuild.
* configure.ac: Call ZW_GNU_GETTEXT_SISTER_DIR.
* acinclude.m4: Include gettext-sister.m4.
* Makefile.in (top_builddir, INTL, INTL_DEPS, INTL_CFLAGS): New
variables.
(INCLUDE_CFLAGS): Add INTL_CFLAGS.
(gdbserver$(EXEEXT), gdbreplay$(EXEEXT)): Use INTL_DEPS, INTL.
An earlier patch changed gdbserver to use the already-built top-level
gnulib and gdbsupport. However, if one did a build that did not
include gdb, then gdbserver would fail to build.
The problem is that configure.ac only adds gnulib and gdbsupport to
the build when gdb is being built. This patch fixes the problem by
arranging for this to happen when gdbserver is built.
ChangeLog
2020-02-17 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac (configdirs): Add gnulib and gdbsupport when building
gdbserver.
This changes gdbserver so that it no longer builds its own gnulib and
libiberty. Instead, it now relies on the ones that were already built
at the top level.
gdbsupport is still built specially for gdbserver. This is more
complicated and will be tackled in a subsequent patch.
ChangeLog
2020-02-14 Tom Tromey <tom@tromey.com>
* Makefile.in: Rebuild.
* Makefile.def: Make gdbserver require gnulib and libiberty.
gdbserver/ChangeLog
2020-02-14 Tom Tromey <tom@tromey.com>
* acinclude.m4: Don't include acx_configure_dir.m4.
* Makefile.in (LIBIBERTY_BUILDDIR, GNULIB_BUILDDIR): Update.
(SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): Remove.
(all, install-only, uninstall, clean-info, clean)
(maintainer-clean): Don't recurse.
(subdir_do, all-lib): Remove.
($(LIBGNU) $(LIBIBERTY) $(GNULIB_H)): Remove rule.
(GNULIB_H): Remove.
(generated_files): Update.
($(GNULIB_BUILDDIR)/Makefile): Remove rule.
* configure: Rebuild.
* configure.ac: Don't configure gnulib or libiberty.
(GNULIB): Update.
gdbsupport/ChangeLog
2020-02-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Change path to gnulib/config.h.
Change-Id: I469cbbf5db2ab37109c058e9e3a1e4f4dabdfc98
This patch moves gdbserver to the top level.
This patch is as close to a pure move as possible -- gdbserver still
builds its own variant of gnulib and gdbsupport. Changing this will
be done in a separate patch.
[v2] Note that, per Simon's review comment, this patch changes the
tree so that gdbserver is not built for or1k or score. This makes
sense, because there is apparently not actually a gdbserver port here.
[v3] This version of the patch also splits out some configury into a
new file, gdbserver/configure.host, so that the top-level configure
script can simply rely on it in order to decide whether gdbserver
should be built.
[v4] This version adds documentation and removes some unnecessary
top-level dependencies.
[v5] Update docs to mention "make all-gdbserver" and change how
top-level configure decides whether to build gdbserver, switching to a
single, shared script.
Tested by the buildbot.
ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver.
* gdbserver: New directory, moved from gdb/gdbserver.
* configure.ac (host_tools): Add gdbserver.
Only build gdbserver on certain systems.
* Makefile.in, configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gdbserver.
* MAINTAINERS: Add gdbserver.
gdb/ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
* README: Update gdbserver documentation.
* gdbserver: Move to top level.
* configure.tgt (build_gdbserver): Remove.
* configure.ac: Remove --enable-gdbserver.
* configure: Rebuild.
* Makefile.in (distclean): Don't mention gdbserver.
Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e
The move of gdbsupport to the top level directory requires a small
change to src-release.sh's "getver" function, which is responsible for
determining the version string that will be appended to the release
tarball: now the create-version.sh script lives under ./gdbsupport,
and not under gdb/gdbsupport anymore.
This patch unbreaks the snapshot generation, which hasn't been working
since January 14th.
ChangeLog:
2020-01-29 Sergio Durigan Junior <sergiodj@redhat.com>
* src-release.sh (getver): Look for gdbsupport's
create-version.sh script at the current directory if tool is
"gdb".
Change-Id: Id3b8bed6583a1aaa120c07009366f6c94a62d5db
When running a program with the simulator target, I get:
/home/simark/src/binutils-gdb/gdb/inferior.c:279: internal-error: inferior* find_inferior_pid(process_stratum_target*, int): Assertion `pid != 0' failed.
This can be reproduced by building a GDB for --target=arm-none-gnueabi,
and running with
$ ./gdb -nx --data-directory=data-directory a.out -ex "target sim" -ex load -ex "b main" -ex r
Where a.out is any program with a main.
The problem is that gdbsim_target::wait assumes that inferior_ptid has
the value of the thread it wants to report an event for.
Actually, it's the target's responsibility to come up with the ptid of
the thread the event is for. In the sim target, that ptid is stored in
sim_inferior_data::remote_sim_ptid, so return that instead of
inferior_ptid.
ChangeLog:
* remote-sim.c (gdbsim_target::wait): Return
sim_data->remote_sim_ptid instead of inferior_ptid.
2020-01-01 Ben Elliston <bje@gnu.org>
* config.guess: Update copyright years.
* config.sub: Likewise.
2019-12-21 Ben Elliston <bje@gnu.org>
* config.guess (set_cc_for_build): Prevent multiple calls by
checking if $tmp is already set. We can't check CC_FOR_BUILD as
the user may set it externally. Thanks to Torbj?rn Granlund for
the bug report.
2019-12-21 Torbj?rn Granlund <tg@gmplib.org>
* config.guess (alpha:Linux:*:*): Guard against missing
/proc/cpuinfo by redirecting standard error to /dev/null.
2019-09-12 Daniel Bittman <danielbittman1@gmail.com>
* config.guess (*:Twizzler:*:*): New.
* config.sub (-twizzler*): New.
2019-07-24 Ben Elliston <bje@gnu.org>
* config.guess (mips:OSF1:*.*): Whitespace cleanup.
2019-06-30 Ben Elliston <bje@gnu.org>
* config.sub (case $os): Match nsk* and powerunix. Don't later
match nsk* and set os=nsk which removes the OS version number.
2019-06-30 Ben Elliston <bje@gnu.org>
* config.sub: Recognise os108*.
2019-06-26 Ben Elliston <bje@gnu.org>
* config.sub (hp300): Set $os to hpux.
2019-06-26 Ben Elliston <bje@gnu.org>
* config.sub (vsta): Move into alphabetical order.
2019-06-10 Ben Elliston <bje@gnu.org>
* config.guess (*:OS108:*:*): Recognise new OS.
2019-05-28 Ben Elliston <bje@gnu.org>
* config.guess (*:Darwin:*:*): Run xcode-select to determine if a
system compiler is installed. If not, do not run set_cc_for_build,
as the default cc will open a dialog box asking to install
Xcode. If no C compiler is available, guess based on uname -p and
uname -m.
2019-05-28 Ben Elliston <bje@gnu.org>
* config.guess (*:Darwin:*:*): Simplify UNAME_PROCESSOR.
Trying to run "make all-gdbsupport" at the top-level in a build from scratch
results in:
make[2]: Entering directory '/home/smarchi/build/binutils-gdb/gdbsupport'
CC agent.o
In file included from /home/smarchi/src/binutils-gdb/gdbsupport/common-defs.h:133,
from /home/smarchi/src/binutils-gdb/gdbsupport/agent.c:20:
/home/smarchi/src/binutils-gdb/gdbsupport/common-types.h:35:10: fatal error: bfd.h: No such file or directory
35 | #include "bfd.h"
| ^~~~~~~
Before building all-gdbsupport, we need all-bfd to run, so that bfd.h is
generated.
(Once this patch is merged in the binutils-gdb repo, I'll send it to gcc
to keep the files in sync.)
ChangeLog:
* Makefile.def: Add dependencies of all-gdbsupport on all-bfd.
* Makefile.in: Re-generate.
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
