POWER10 adds some return-oriented programming (ROP) instructions and
this patch adds support for them. You will notice that they are enabled
for POWER8 and later, not just POWER10 and later. This is on purpose.
This allows the instructions to be added to POWER8 binaries that can be
run on POWER8, POWER9 and POWER10 cpus. On POWER8 and POWER9, these
instructions just act as nop's.
opcodes/
* ppc-opc.c (insert_dw, (extract_dw): New functions.
(DW, (XRC_MASK): Define.
(powerpc_opcodes) <hashchk, hashchkp, hashst, haststp>: New mnemonics.
gas/
* testsuite/gas/ppc/rop-checks.d,
* testsuite/gas/ppc/rop-checks.l,
* testsuite/gas/ppc/rop-checks.s,
* testsuite/gas/ppc/rop.d,
* testsuite/gas/ppc/rop.s: New tests.
* testsuite/gas/ppc/ppc.exp: Run them.
commit f478212851 did the regen by hand, missed a change in
ld/configure and didn't update line numbers. Fix that, and an old
regen of ld/Makefile.in with the wrong automake.
bfd/
* configure: Regenerate.
binutils/
* configure: Regenerate.
gas/
* configure: Regenerate.
gprof/
* configure: Regenerate.
ld/
* Makefile.in: Regenerate.
* configure: Regenerate.
libctf/
* configure: Regenerate.
opcodes/
* configure: Regenerate.
zlib/
* configure: Regenerate.
PR 27129
* aarch64-dis.c (determine_disassembling_preference): Move call to
aarch64_match_operands_constraint outside of the assertion.
* aarch64-asm.c (aarch64_ins_limm_1): Remove call to assert.
Replace with a return of FALSE.
Add support for the pause hint instruction, as specified in the
Zihintpause extension. The pause instruction is encoded as a
special form of a memory fence (which is available as part of the
base instruction set). The chosen encoding does not mandate any
particular memory ordering and therefore is a true hint.
bfd/
* elfxx-riscv.c (riscv_std_z_ext_strtab): Added zihintpause.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Added
INSN_CLASS_ZIHINTPAUSE.
* testsuite/gas/riscv/pause.d: New testcase. Adding coverage for
the pause hint instruction.
* testsuite/gas/riscv/pause.s: Likewise.
include/
* opcode/riscv-opc.h: Added MATCH_PAUSE, MASK_PAUSE and DECLARE_INSN
for pause hint instruction.
* opcode/riscv.h (enum riscv_insn_class): Added INSN_CLASS_ZIHINTPAUSE.
opcodes/
* riscv-opc.c (riscv_opcodes): Add pause hint instruction.
In fact rev8/orc.b/zext.h are the aliases of grevi/gorci/pack[w], so we
should update them to INSN_ALIAS when we have supported their true instruction
in the future. Though we still use the [MATCH|MAKS]_[GREVI|GORCI|PACK|PACKW]
to encode them. Besides, the orc.b has the same encoding both in rv32 and
rv64, so we just keep one of them in the opcode table.
This patch is implemented according to the following link,
https://github.com/riscv/riscv-bitmanip/pull/101
2021-01-07 Claire Xenia Wolf <claire@symbioticeda.com>
Jim Wilson <jimw@sifive.com>
Andrew Waterman <andrew@sifive.com>
Maxim Blinov <maxim.blinov@embecosm.com>
Kito Cheng <kito.cheng@sifive.com>
Nelson Chu <nelson.chu@sifive.com>
bfd/
* elfxx-riscv.c (riscv_std_z_ext_strtab): Added zba, zbb and zbc.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Handle INSN_CLASS_ZB*.
(riscv_get_default_ext_version): Do not check the default_isa_spec when
the version defined in the riscv_opcodes table is ISA_SPEC_CLASS_DRAFT.
* testsuite/gas/riscv/bitmanip-insns-32.d: New testcase.
* testsuite/gas/riscv/bitmanip-insns-64.d: Likewise.
* testsuite/gas/riscv/bitmanip-insns.s: Likewise.
include/
* opcode/riscv-opc.h: Added MASK/MATCH/DECLARE_INSN for ZBA/ZBB/ZBC.
* opcode/riscv.h (riscv_insn_class): Added INSN_CLASS_ZB*.
(enum riscv_isa_spec_class): Added ISA_SPEC_CLASS_DRAFT for the
frozen extensions.
opcodes/
* riscv-opc.c (riscv_opcodes): Add ZBA/ZBB/ZBC instructions.
(MASK_RVB_IMM): Used for rev8 and orc.b encoding.
https://github.com/riscv/riscv-asm-manual/pull/61
We aleady have sext.w, so just add sext.b, sext.h, zext.b, zext.h
and zext.w. In a certain sense, zext.b is not a pseudo - It is an
alias of andi. Similarly, sext.b and sext.h are aliases of other
rvb instructions, when we enable b extension; But they are pseudos
when we just enable rvi. However, this patch does not consider the
rvb cases. Besides, zext.w is only valid in rv64.
gas/
* config/tc-riscv.c (riscv_ext): New function. Use md_assemblef
to expand the zext and sext pseudos, to give them a chance to be
expanded into c-ext instructions.
(macro): Handle M_ZEXTH, M_ZEXTW, M_SEXTB and M_SEXTH.
* testsuite/gas/riscv/ext.s: New testcase.
* testsuite/gas/riscv/ext-32.d: Likewise.
* testsuite/gas/riscv/ext-64.d: Likewise.
include/
* opcode/riscv.h (M_ZEXTH, M_ZEXTW, M_SEXTB, M_SEXTH.): Added.
opcodes/
* riscv-opc.c (riscv_opcodes): Add sext.[bh] and zext.[bhw].
opcodes/
* disassemble.h (riscv_get_disassembler): Declare.
* disassemble.c (disassembler): Changed to riscv_get_disassembler.
* riscv-dis.c (riscv_get_disassembler): Check the elf privileged spec
attributes before calling print_insn_riscv.
(parse_riscv_dis_option): Same as the assembler, the priority of elf
attributes are higher than the options. If we find the privileged
attributes, but the -Mpriv-spec= is different, then output error/warning
and still use the elf attributes set.
bfd/
* elfxx-riscv.c (riscv_ext_dont_care_version): New function. Return
TRUE if we don't care the versions of the extensions. These extensions
are added to the subset list for special purposes, with the explicit
versions or the RISCV_UNKNOWN_VERSION versions.
(riscv_parse_add_subset): If we do care the versions of the extension,
and the versions are unknown, then report errors for the non-implicit
extensions, and return directly for the implicit one.
(riscv_arch_str1): Do not output i extension after e, and the extensions
which versions are unknown.
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Handle INSN_CLASS_ZICSR
and INSN_CLASS_ZIFENCEI.
* testsuite/gas/riscv/march-imply-i.s: New testcase.
* testsuite/gas/riscv/march-imply-i2p0-01.d: New testcase. The version
of i is less than 2.1, and zi* are supported in the chosen spec, so
enable the fence.i and csr instructions, also output the implicit zi* to
the arch string.
* testsuite/gas/riscv/march-imply-i2p0-02.d: Likewise, but the zi* are
not supported in the spec 2.2. Enable the related instructions since
i's version is less than 2.1, but do not output them.
* testsuite/gas/riscv/march-imply-i2p1-01.d: New testcase. The version
of i is 2.1, so don't add it's implicit zi*, and disable the related
instructions.
* testsuite/gas/riscv/march-imply-i2p1-01.l: Likewise.
* testsuite/gas/riscv/march-imply-i2p1-02.d: Likewise, and set the zi*
explicitly, so enable the related instructions.
* testsuite/gas/riscv/march-imply-i2p0.d: Removed.
* testsuite/gas/riscv/march-imply-i2p1.d: Removed.
include/
* opcode/riscv.h: Add INSN_CLASS_ZICSR and INSN_CLASS_ZIFENCEI.
opcodes/
* riscv-opc.c (riscv_opcodes): Control fence.i and csr instructions by
zifencei and zicsr.
These two extended mnemonics are documented in the Principles of
Operations manual but currently not supported by Binutils. They
provide aliases for already supported instructions with the zero flag
being set. The flag otherwise is mingled into one of the immediate
operands what makes asm code much harder to read.
opcodes/
* s390-opc.txt: Add risbgz and risbgnz.
* s390-opc.c (U6_26): New operand type.
(INSTR_RIE_RRUUU2, MASK_RIE_RRUUU2): New instruction format and
mask.
gas/
* testsuite/gas/s390/zarch-z10.s: Add tests for risbgz.
* testsuite/gas/s390/zarch-z10.d: Add regexp for risbgz.
* testsuite/gas/s390/zarch-zEC12.s: Add tests for risbgnz.
* testsuite/gas/s390/zarch-zEC12.d: Add regexp for risbgnz.
Add extended mnemonics used in the HLASM assembler. All of them are
just aliases for instructions we already support and help when
assembling code which was written for the HLASM assembler.
The HLASM mnemonics are documented here:
https://www.ibm.com/support/knowledgecenter/SSENW6_1.6.0/com.ibm.hlasm.v1r6.asm/asmr1023.pdf
See the 'Branching with extended mnemonic codes' chapter.
objdump will still print the existing mnemonics with the exception of
relative nop branches (i.e. conditional branches with an empty
condition code mask). Now we have jnop and jgnop which will be used
by objdump when possible.
The same change have been applied to the LLVM assembler:
https://reviews.llvm.org/D92185
opcodes/
* s390-opc.txt: Add extended mnemonics.
gas/
* testsuite/gas/s390/esa-g5.s: Test new extended mnemonics.
* testsuite/gas/s390/esa-g5.d: Likewise.
* testsuite/gas/s390/esa-z900.s: Likewise.
* testsuite/gas/s390/esa-z900.d: Likewise.
* testsuite/gas/s390/zarch-z900.s: Likewise.
* testsuite/gas/s390/zarch-z900.d: Likewise.
ld/
* testsuite/ld-s390/tlsbin_64.dd: The newly added jgnop mnemonic
replaces long relative branches with empty condition code mask.
Although spec had defined and ratified p, v and n extensions,
but we don't have any related implementaitons so far, so keep
them in the supported extension table looks weird. Remove them
until we have the related implementations.
opcodes/
* riscv-opc.c (riscv_ext_version_table): Remove the p, v, n
and their versions.
The previous change
"x86: Ignore CS/DS/ES/SS segment-override prefixes in 64-bit mode"
to ignore segment override prefixes in 64-bit mode lead to dumping
branch hints as excessive prefixes:
ffffffff8109d5a0 <vmx_get_rflags>:
...
ffffffff8109d601: 3e 77 0a ds ja,pt ffffffff8109d60e <vmx_get_rflags+0x6e>
^^^^^
In this particular case, those prefixes are not excessive but are used
to provide branch hints - taken/not-taken - to the CPU.
Assign active_seg_prefix in that particular case to consume them.
gas/
2002-11-29 Borislav Petkov <bp@suse.de>
* testsuite/gas/i386/branch.d: Add new branch insns test.
* testsuite/gas/i386/branch.s: Likewise.
* testsuite/gas/i386/i386.exp: Insert the new branch test.
* testsuite/gas/i386/x86-64-branch.d: Test for branch hints insns.
* testsuite/gas/i386/x86-64-branch.s: Likewise.
* testsuite/gas/i386/ilp32/x86-64-branch.d: Likewise.
opcodes/
2020-11-28 Borislav Petkov <bp@suse.de>
* i386-dis.c (print_insn): Set active_seg_prefix for branch hint insns
to not dump branch hint prefixes 0x2E and 0x3E as unused prefixes.
Extract FLAGM (Condition flag manipulation) feature from Armv8.4-A.
Please note that FLAGM stays a Armv8.4-A feature but now can be
assigned to other architectures or CPUs.
New -march option +flagm is added to enable independently this
feature.
include * opcode/pru.h: Add LMBD (left-most bit detect) opcode index
opcodes * pru-opc.c: Add opcode description for LMBD (left-most bit detect)
gas * testsuite/gas/pru/misc.s: Add tests for lmbd (left-most bit detect)
* testsuite/gas/pru/misc.d: Add tests for lmbd (left-most bit
This patch:
+ Adds new ACCDATA_EL1 (Accelerator Data) system register, see [0].
+ Adds LS64 instruction tests.
+ Update LS64 feature test with new register.
+ Fix comment for AARCH64_OPND_Rt_LS64.
[0] https://developer.arm.com/docs/ddi0595/i/aarch64-system-registers/accdata_el1
Note: as this is register only extension we do not want to hide these
registers behind -march flag going forward (they should be enabled by
default).
Atomic 64-byte load/store instructions limit Rt register number to
values matching below condition (register <Xt> number must be even
and <= 22):
if Rt<4:3> == '11' || Rt<0> == '1' then UNDEFINED;
This patch adds check if Rt fulfills above requirement.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
Extract PAC (Pointer Authentication) feature from Armv8.3-A.
Please note that PAC stays a Armv8.3-A feature but now can be
assigned to other architectures or CPUs.
This patch:
+ updates RAS feature system registers with new RAS 1.1 regs.
+ extends RAS/RAS 1.1 support for all architecture levels of Armv8-A.
Please note that early Armv8-A architectures do not officially support RAS
extension.
Rationale of the patch:
To ease development so that user-friendly RAS system registers operands can be
used. Certain use cases require developers to enable only more generic
architecture (e.g. -march=armv8-a) during system development. Users must use
RAS extension registers bearing in mind that system they use must support it.
The RAS (Reliability, Availability, Serviceability) extension is a
system-level extension that defines a number of system registers.
RAS 1.1 (FEAT_RASv1p1) introduces five new system registers:
ERXPFGCTL_EL1, ERXPFGCDN_EL1, ERXMISC2_EL1, ERXMISC3_EL1 and
ERXPFGF_EL1.
For details see [0].
[0] https://developer.arm.com/docs/ddi0595/i/
Armv8.7 architecture introduces the "accelerator extension", aka
load/store of 64 bytes. New atomic load/store instructions are: LD64B,
ST64B, ST64BV and ST64BV0.
This patch adds:
+ New feature +ls64 to -march command line.
+ New atomic load/store instructions associated with above feature.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/
* config/tc-csky.c (get_operand_value): Add handler for
OPRND_TYPE_IMM5b_VSH and OPRND_TYPE_VREG_WITH_INDEX.
* testsuite/gas/csky/csky_vdsp.d : Fix the disassembling
for vector register.
opcodes/
* csky-dis.c (csky_output_operand): Add handler for
OPRND_TYPE_IMM5b_VSH and OPRND_TYPE_VREG_WITH_INDEX.
* csky-opc.h (OPRND_TYPE_VREG_WITH_INDEX): New enum.
(OPRND_TYPE_IMM5b_VSH): New enum.
(csky_v2_opcodes): Fix and add some instructions for VDSPV1.
Change-Id: Ia5675d7b716fe5c331e6121ad8f83061ef6454bb
Remove the duplicated entry in opcodes/po/es.po:
binutils-gdb/opcodes/po/es.po:749: duplicate message definition...
binutils-gdb/opcodes/po/es.po:742: ...this is the location of the first definition
* po/es.po: Remove the duplicated entry.
bfd * po/es.po: Fix printf format
binutils * windmc.c: Fix printf format
gas * config/tc-arc.c: Fix printf format
opcodes * po/es.po: Fix printf format
sim * arm/armos.c: Fix printf format
* ppc/emul_netbsd.c: Fix printf format
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
