These are files that need to be updated by hand, because the copyright.py
script isn't able to handle them automatically.
gdb/ChangeLog:
* gdbarch.sh: Update copyright year range of generated files.
gdb/doc/ChangeLog:
* gdb.texinfo, refcard.tex: Update copyright year range.
This fixes yet more errors in the alpha-vms buffer size checks.
* vms-alpha.c (_bfd_vms_slurp_eisd): Don't overflow when checking
offset. Don't overflow when checking rec_size, and do allow
rec_size to the end of the buffer. Ensure eisd->type can be
accessed, not just the first 32 bytes. Don't call
_bfd_vms_save_counted_string with zero length remaining. Fail
on empty string section name.
(_bfd_vms_slurp_egsd): Formatting. Catch more reads past end
of record size. Correct remaining length calculation. Fail
on empty string section name. Consolidate error paths.
This changes a few TUI globals to be "static". Tested by rebuilding.
gdb/ChangeLog
2019-12-30 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (tui_border_mode_translate)
(tui_border_kind_translate_vline, tui_border_kind_translate_hline)
(tui_border_kind_translate_ulcorner)
(tui_border_kind_translate_urcorner)
(tui_border_kind_translate_llcorner)
(tui_border_kind_translate_lrcorner, tui_active_border_mode)
(tui_border_mode, tui_border_kind): Now static.
Change-Id: Ibb49a0df195dfe780a5ba1f90e9125ab5f6b7ce1
This changes a few spots in the TUI to use "bool" rather than "int".
Tested on x86-64 Fedora 28.
gdb/ChangeLog
2019-12-30 Tom Tromey <tom@tromey.com>
* tui/tui-interp.c (tui_start_enabled): Now bool.
(_initialize_tui_interp): Update.
* tui/tui-hooks.c (tui_refreshing_registers): Now bool.
(tui_register_changed)
(tui_refresh_frame_and_register_information): Update.
* tui/tui-win.c (tui_update_variables): Return bool.
* tui/tui-win.h (tui_update_variables): Return bool.
* tui/tui.c (tui_get_command_dimension): Return bool.
* tui/tui.h (tui_get_command_dimension): Return bool.
Change-Id: I55b7f2d62d2ef88da3587dc914ada9f463ad8d2b
Quite a few bfd_zalloc calls are wasting time clearing memory, and
should be bfd_alloc instead.
* archive.c (do_slurp_bsd_armap): Use bfd_alloc rather than
bfd_zalloc when memory is all written after the call.
(do_slurp_coff_armap): Likewise. Set bfd_error on ridiculously
large allocations that overflow bfd_size_type. Use just one
bfd_release on error exit.
(_bfd_slurp_extended_name_table): Use bfd_alloc for extended_names,
clear last byte rather than the entire array. Use bfd_alloc for
string table. Rearrange and simplify code copying file names.
A missing part of git commit cd30bcef4a.
* od-macho.c: Include elfcomm.h.
(dump_dyld_info_rebase, dump_dyld_info_bind): Fix read_leb128 args.
(dump_dyld_info_export_1, dump_segment_split_info): Likewise.
This removes code that was present from the very first git revisison
7b4ac7e1ed from 1988. It was in the
gdb/dbxread.c at the time (and makes more sense for dbx line info format
since line numbers are 16-bit entities in that debug format and debugging
files with more than 65535 lines would not work anyway) but moved from
there to gdb/buildsym.c which is used for dwarf line info as well, and
excluding an arbitrary line number does certainly not make sense nowadays.
Add a test case for line 65535
gdb:
2019-12-29 Bernd Edlinger <bernd.edlinger@hotmail.de>
* buildsym.c (buildsym_compunit::record_line): Do no longer ignore
line 65535.
gdb/testsuite:
2019-12-29 Bernd Edlinger <bernd.edlinger@hotmail.de>
* gdb.base/line65535.exp: New file.
* gdb.base/line65535.c: New file.
* vms-alpha.c (_bfd_vms_slurp_egsd): Make base_addr a bfd_vma.
Limit alignment power. Correct and simplify alignment expression.
(evax_bfd_print_relocation_records): Avoid signed shift left.
This test verifies that GDB correctly identifies the run-time type of
"s" as being the type "Circle". However, that can only be done
correctly if the GNAT runtime has been compiled and shipped with debug
information, so that GDB can poke in its internal data structures.
Currently the test fails when when running against a GNAT runtime
without debug info. This is the case, for example, on Arch Linux using
the distribution package.
This patch adds a helper in lib/ada.exp to check whether the GNAT
runtime has debug info or not. It then uses it in
gdb.ada/ptype_tagged_param.exp to expect a different result, depending
on whether we have debug info or not in the runtime.
At first, I made it so we would XFAIL the test, in the absence of debug
info, but then I thought that we might as well test for the output we
expect in the absence of debug info instead.
gdb/testsuite/ChangeLog:
* lib/ada.exp (gnat_runtime_has_debug_info): New proc.
* lib/gnat_debug_info_test.adb: New file.
* gdb.ada/ptype_tagged_param.exp: Use
gnat_runtime_has_debug_info, expect a different output if
runtime does not have debug info.
I found some dead code in the TUI -- some using #if 0, and some
commented-out code. There's no reason to keep this, so this patch
removes it.
gdb/ChangeLog
2019-12-27 Tom Tromey <tom@tromey.com>
* tui/tui-source.c (tui_source_window::do_scroll_vertical): Remove
commented-out code.
* tui/tui.c: Remove #if 0 code.
Change-Id: Ie00933b2ba498417ce22e5da3f62f5a40c234f33
I noticed that print_disassembly has two #if blocks for TUI code,
where one would do. This patch rearranges the code slightly to remove
a #if.
gdb/ChangeLog
2019-12-27 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (print_disassembly): Reorder "if".
Change-Id: I36f3f682f5685b3d9b148da5aed26eb3cc7d598e
This changes tui_active and tui_finish_init to have type "bool".
gdb/ChangeLog
2019-12-27 Tom Tromey <tom@tromey.com>
* tui/tui.c (tui_active): Now bool.
(tui_finish_init): Likewise.
(tui_enable): Update.
(tui_disable): Update.
(tui_is_window_visible): Update.
* tui/tui.h (tui_active): Now bool.
Change-Id: Ia159ae9beb041137e34956b77f5bcf4e83eaf2b9
tui_gen_win_info::viewport_height is only used in a couple of spots,
and is redundant with "height". This patch removes viewport_height.
gdb/ChangeLog
2019-12-27 Tom Tromey <tom@tromey.com>
* tui/tui-source.c (tui_source_window::maybe_update): Update.
* tui/tui-regs.c (tui_data_window::display_registers_from):
Update.
* tui/tui-layout.c (tui_gen_win_info::resize): Update.
* tui/tui-data.h (struct tui_gen_win_info) <viewport_height>:
Remove.
* tui/tui-command.c (tui_cmd_window::resize): Update.
Change-Id: I020e026fbe289adda8e2fdfebca91bdbdbc312e8
There's no reason to not also issue them in Intel syntax mode, and it
can be quite helpful to mention the actual insn (after all there can be
multiple on a single line).
First and foremost REX must come last. Next JumpInterSegment branches
can't possibly have a REX prefix, as they're consistently CpuNo64. And
finally make BND prefix handling in output_branch() consistent with that
of other prefixes in the same function, and make its placement among
prefixes consistent with output_jump() (which, oddly enough, still isn't
the supposedly canonical order specified by the *_PREFIX definitions).
The expectation of x86-64-branch-3 for "call" / "jmp" with an obvious
direct destination to translate to an indirect _far_ branch is plain
wrong. The operand size prefix should have no effect at all on the
interpretation of the operand. The main underlying issue here is that
the Intel64 templates of the direct branches don't include Disp16, yet
various assumptions exist that it would always be there when there's
also Disp32/Disp32S, toggled by the operand size prefix (which is
being ignored by direct branches in Intel64 mode).
Along these lines it was also wrong to base the displacement width
decision solely on the operand size prefix: REX.W cancels this effect
and hence needs taking into consideration, too.
A disassembler change is needed here as well: XBEGIN was wrongly treated
the same as direct CALL/JMP, which isn't the case - the operand size
prefix does affect displacement size there, it's merely ignored when it
comes to updating [ER]IP.
In memory operand addressing, which forms of displacement are permitted
besides Disp8 is pretty clearly limited
- outside of 64-bit mode, Disp16 or Disp32 only, depending on address
size (MPX being special in not allowing Disp16),
- in 64-bit mode, Disp32s or Disp64 without address size override, and
solely Disp32 with one.
Adjust assembler and i386-gen to match this, observing that templates
already get adjusted before trying to match them against input depending
on the presence of an address size prefix.
This adjustment logic gets extended to all cases, as certain DispNN
values should also be dropped when there's no such prefix. In fact
behavior of the assembler, perhaps besides the exact diagnostics wording,
should not differ between there being templates applicable to 64-bit and
non-64-bit at the same time, or there being fully separate sets of
templates, with their DispNN settings already reduced accordingly.
This adjustment logic further gets guarded such that there wouldn't be
and Disp<N> conversion based on address size prefix when this prefix
doesn't control the width of the displacement (on branches other than
absolute ones).
These adjustments then also allow folding two MOV templates, which had
been split between 64-bit and non-64-bits variants so far.
Once in this area also
- drop the bogus DispNN from JumpByte templates, leaving just the
correct Disp8 there (compensated by i386_finalize_displacement()
now setting Disp8 on their operands),
- add the missing Disp32S to XBEGIN.
Note that the changes make it necessary to temporarily mark a test as
XFAIL; this will get taken care of by a subsequent patch. The failing
parts are entirely bogus and will get replaced.
This also renames it to make it clearer that this is not a cheap
function (to compute_and_set_names). Also renames name to m_name
to make the implementation of the renamed function more readable.
Most of the places that access sym->m_name directly were also changed
to call linkage_name () instead, to make it clearer which name they
are accessing.
gdb/ChangeLog:
2019-12-26 Christian Biesinger <cbiesinger@google.com>
* ada-lang.c (ada_decode_symbol): Update.
* buildsym.c (add_symbol_to_list): Update.
* coffread.c (process_coff_symbol): Update.
* ctfread.c (ctf_add_enum_member_cb): Update.
(new_symbol): Update.
(ctf_add_var_cb): Update.
* dwarf2read.c (fixup_go_packaging): Update.
(dwarf2_compute_name): Update.
(new_symbol): Update.
* jit.c (finalize_symtab): Update.
* language.c (language_alloc_type_symbol): Update.
* mdebugread.c (new_symbol): Update.
* minsyms.c (minimal_symbol_reader::record_full): Update.
(minimal_symbol_reader::install): Update.
* psymtab.c (print_partial_symbols): Update.
(psymbol_hash): Update.
(psymbol_compare): Update.
(add_psymbol_to_bcache): Update.
(maintenance_check_psymtabs): Update.
* stabsread.c (define_symbol): Update.
* symtab.c (symbol_set_names): Rename to...
(general_symbol_info::compute_and_set_names): ...this.
(general_symbol_info::natural_name): Update.
(general_symbol_info::search_name): Update.
(fixup_section): Update.
* symtab.h (struct general_symbol_info) <name>: Rename to...
<m_name>: ...this.
<compute_and_set_names>: Rename from...
(symbol_set_names): ...this.
(SYMBOL_SET_NAMES): Remove.
(struct symbol) <ctor>: Update.
Change-Id: I8da1f10cab4e0b89f19d5750fa4e6e2ac8d2b24f
Now that we enabled it by default, this change adds a NEWS entry for it.
gdb/ChangeLog:
2019-12-26 Christian Biesinger <cbiesinger@google.com>
* NEWS: Mention that multithreaded symbol loading is now on by
default.
Change-Id: Ic344596a3b1b6e612a0071a50df49588b833c15d
I reckon it's quite OK to write &p->field in C when p might be NULL,
and lots of old C programmers probably agree with me. However, ubsan
disagrees and so do some people I respect. I suspect C++ influence is
to blame for the ubsan behaviour. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92634. So far no one has
educated me as to why I'm wrong to claim that there isn't anything in
the C standard to say that p->field is always (*p).field. Note 79
doesn't quite do that because it doesn't cover null pointers. If
there was such an equivalence then you could claim &p->field has a
null pointer reference when p is NULL, even though no C compiler would
ever dereference p.
Anyway, to silence ubsan I'm going to apply the following though I
prefer to avoid casts when possible. And I'm using (void *)
deliberately because this is C, not C++!
* ldlang.c (lang_output_section_find_by_flags): Don't use &p->field
when p might be NULL.
* ldelf.c (output_rel_find, ldelf_place_orphan): Likewise.
(insert_os_after, lang_insert_orphan, lookup_name): Likewise.
(strip_excluded_output_sections, lang_clear_os_map): Likewise.
(lang_check, lang_for_each_input_file): Likewise.
(lang_reset_memory_regions, find_replacements_insert_point): Likewise.
(find_rescan_insertion, lang_propagate_lma_regions): Likewise.
(lang_record_phdrs): Likewise.
* emultempl/alphaelf.em (alpha_after_open): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_${EMULATION_NAME}_place_orphan): Likewise.
* emultempl/pep.em (gld_${EMULATION_NAME}_place_orphan): Likewise.
* emultempl/ppc32elf.em (ppc_after_check_relocs): Likewise.
* emultempl/spuelf.em (spu_before_allocation): Likewise.
(embedded_spu_file): Likewise.
Triggered by overflow of size calulation resulting in a too small
buffer. The testcase found one of the som_bfd_count_ar_symbols
problems.
* som.c (setup_sections): Don't overflow space_strings_size. Use
bfd_malloc2 to catch overflow of size calculation.
(som_prep_for_fixups): Use bfd_zalloc2 to catch overflow of size
calculation.
(som_build_and_write_symbol_table): Similarly use bfd_zmalloc2.
(som_slurp_symbol_table): Similarly use bfd_zmalloc2, bfd_malloc2,
and bfd_zalloc2.
(bfd_som_attach_aux_hdr): Use size_t vars for string length.
(som_bfd_count_ar_symbols): Use bfd_malloc2 to catch overflow of
size calculation. Use size_t vars for length and catch overflow.
(som_slurp_armap): Use bfd_alloc2 to catch overflow of size
calculation.
(som_bfd_ar_write_symbol_stuff): Similarly use bfd_zmalloc2 and
bfd_malloc2. Perform size calculations in bfd_size_type.
"perf record" creates files perf.data/perf.data.old; these can be safely
ignored in .gitignore, to avoid showing up in git status.
ChangeLog:
2019-12-26 Christian Biesinger <cbiesinger@google.com>
* .gitignore: Add perf.data and perf.data.old.
Change-Id: I214ae9d6b7265c2cb1356f11c9b0b82e2b391352
