mirrors/binutils-gdb
0
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-15 05:13:35 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity
90,566 Commits 385 Branches 134 Tags 598 MiB
ae3b3f34ed
Commit Graph

114 Commits

Author SHA1 Message Date
Sergio Durigan Junior
7c5ded6a00 C++-fy and prepare for sharing fork_inferior 
As a preparation for the next patch, which will move fork_inferior
from GDB to common/ (and therefore share it with gdbserver), it is
interesting to convert a few functions to C++.

This patch touches functions related to parsing command-line arguments
to the inferior (see gdb/fork-child.c:breakup_args), the way the
arguments are stored on fork_inferior (using std::vector instead of
char **), and the code responsible for dealing with argv also on
gdbserver.

I've taken this opportunity and decided to constify a few arguments to
fork_inferior/create_inferior as well, in order to make the code
cleaner.  And now, on gdbserver, we're using xstrdup everywhere and
aren't checking for memory allocation failures anymore, as requested
by Pedro:

  <https://sourceware.org/ml/gdb-patches/2017-03/msg00191.html>
  Message-Id: <025ebdb9-90d9-d54a-c055-57ed2406b812@redhat.com>

  Pedro Alves wrote:

  > On the "== NULL" check: IIUC, the old NULL check was there to
  > handle strdup returning NULL due to out-of-memory.
  > See NULL checks and comments further above in this function.
  > Now that you're using a std::vector, that doesn't work or make
  > sense any longer, since if push_back fails to allocate space for
  > its internal buffer (with operator new), our operator new replacement
  > (common/new-op.c) calls malloc_failure, which aborts gdbserver.
  >
  > Not sure it makes sense to handle out-of-memory specially in
  > the gdb/rsp-facing functions nowadays (maybe git blame/log/patch
  > submission for that code shows some guidelines).  Maybe (or, probably)
  > it's OK to stop caring about it, but then we should consistently remove
  > left over code, by using xstrdup instead and remove the NULL checks.

IMO this refactoring was very good to increase the readability of the
code as well, because some parts of the argument handling were
unnecessarily confusing before.

gdb/ChangeLog:
2017-04-12  Sergio Durigan Junior  <sergiodj@redhat.com>

	* common/common-utils.c (free_vector_argv): New function.
	* common/common-utils.h: Include <vector>.
	(free_vector_argv): New prototype.
	* darwin-nat.c (darwin_create_inferior): Rewrite function
	prototype in order to constify "exec_file" and accept a
	"std::string" for "allargs".
	* fork-child.c: Include <vector>.
	(breakup_args): Rewrite function, using C++.
	(fork_inferior): Rewrite function header, constify "exec_file_arg"
	and accept "std::string" for "allargs".  Update the code to
	calculate "argv" based on "allargs".  Update calls to "exec_fun"
	and "execvp".
	* gnu-nat.c (gnu_create_inferior): Rewrite function prototype in
	order to constify "exec_file" and accept a "std::string" for
	"allargs".
	* go32-nat.c (go32_create_inferior): Likewise.
	* inf-ptrace.c (inf_ptrace_create_inferior): Likewise.
	* infcmd.c (run_command_1): Constify "exec_file".  Use
	"std::string" for inferior arguments.
	* inferior.h (fork_inferior): Update prototype.
	* linux-nat.c (linux_nat_create_inferior): Rewrite function
	prototype in order to constify "exec_file" and accept a
	"std::string" for "allargs".
	* nto-procfs.c (procfs_create_inferior): Likewise.
	* procfs.c (procfs_create_inferior): Likewise.
	* remote-sim.c (gdbsim_create_inferior): Likewise.
	* remote.c (extended_remote_run): Update code to accept
	"std::string" as argument.
	(extended_remote_create_inferior): Rewrite function prototype in
	order to constify "exec_file" and accept a "std::string" for
	"allargs".
	* rs6000-nat.c (super_create_inferior): Likewise.
	(rs6000_create_inferior): Likewise.
	* target.h (struct target_ops) <to_create_inferior>: Likewise.
	* windows-nat.c (windows_create_inferior): Likewise.

gdb/gdbserver/ChangeLog:
2017-04-12  Sergio Durigan Junior  <sergiodj@redhat.com>

	* server.c: Include <vector>.
	<program_argv, wrapper_argv>: Convert to std::vector.
	(start_inferior): Rewrite function to use C++.
	(handle_v_run): Likewise.  Update code that calculates the argv
	based on the vRun packet; use C++.
	(captured_main): Likewise.
 2017-04-12 01:02:03 -04:00
Simon Marchi
bcc0c096d5 Use ptid from regcache in almost all remaining nat files 
This patch contains almost all of the remaining changes needed to make
to_fetch_registers/to_store_registers/to_prepare_to_store independent of
inferior_ptid.  It contains only some "trivial" changes, the more
complicated ones are in separate patches.

gdb/ChangeLog:

	* i386-linux-nat.c (fetch_register, store_register,
	i386_linux_fetch_inferior_registers,
	i386_linux_store_inferior_registers): Use ptid from regcache.
	* ia64-linux-nat.c (ia64_linux_fetch_register,
	ia64_linux_store_register): Likewise.
	* inf-ptrace.c (inf_ptrace_fetch_register,
	inf_ptrace_store_register): Likewise.
	* m32r-linux-nat.c (m32r_linux_fetch_inferior_registers,
	m32r_linux_store_inferior_registers): Likewise.
	* m68k-bsd-nat.c (m68kbsd_fetch_inferior_registers,
	m68kbsd_store_inferior_registers): Likewise.
	* m68k-linux-nat.c (fetch_register, store_register,
	m68k_linux_fetch_inferior_registers,
	m68k_linux_store_inferior_registers): Likewise.
	* m88k-bsd-nat.c (m88kbsd_fetch_inferior_registers,
	m88kbsd_store_inferior_registers): Likewise.
	* mips-fbsd-nat.c (mips_fbsd_fetch_inferior_registers,
	mips_fbsd_store_inferior_registers): Likewise.
	* mips-linux-nat.c (mips64_linux_regsets_fetch_registers,
	mips64_linux_regsets_store_registers): Likewise.
	* mips-nbsd-nat.c (mipsnbsd_fetch_inferior_registers,
	mipsnbsd_store_inferior_registers): Likewise.
	* mips-obsd-nat.c (mips64obsd_fetch_inferior_registers,
	mips64obsd_store_inferior_registers): Likewise.
	* nto-procfs.c (procfs_fetch_registers, procfs_store_registers):
	Likewise.
	* ppc-fbsd-nat.c (ppcfbsd_fetch_inferior_registers,
	ppcfbsd_store_inferior_registers): Likewise.
	* ppc-linux-nat.c (ppc_linux_fetch_inferior_registers,
	ppc_linux_store_inferior_registers): Likewise.
	* ppc-nbsd-nat.c (ppcnbsd_fetch_inferior_registers,
	ppcnbsd_store_inferior_registers): Likewise.
	* ppc-obsd-nat.c (ppcobsd_fetch_registers,
	ppcobsd_store_registers): Likewise.
	* procfs.c (procfs_fetch_registers, procfs_store_registers):
	Likewise.
	* ravenscar-thread.c (ravenscar_fetch_registers,
	ravenscar_store_registers, ravenscar_prepare_to_store):
	Likewise.
	* record-btrace.c (record_btrace_fetch_registers,
	record_btrace_store_registers, record_btrace_prepare_to_store):
	Likewise.
	* remote-sim.c (gdbsim_fetch_register, gdbsim_store_register):
	Lookup inferior using ptid from regcache, instead of
	current_inferior.
	* remote.c (remote_fetch_registers, remote_store_registers): Use
	ptid from regcache.
	* rs6000-nat.c (fetch_register, store_register): Likewise.
	* s390-linux-nat.c (s390_linux_fetch_inferior_registers,
	s390_linux_store_inferior_registers): Likewise.
	* sh-nbsd-nat.c (shnbsd_fetch_inferior_registers,
	shnbsd_store_inferior_registers): Likewise.
	* sol-thread.c (sol_thread_fetch_registers,
	sol_thread_store_registers): Likewise.
	* sparc-nat.c (sparc_fetch_inferior_registers,
	sparc_store_inferior_registers): Likewise.
	* tilegx-linux-nat.c (fetch_inferior_registers,
	store_inferior_registers): Likewise.
	* vax-bsd-nat.c (vaxbsd_fetch_inferior_registers,
	vaxbsd_store_inferior_registers): Likewise.
	* xtensa-linux-nat.c (fetch_gregs, store_gregs, fetch_xtregs,
	store_xtregs): Likewise.
 2017-03-20 17:37:36 -04:00
Joel Brobecker
61baf725ec update copyright year range in GDB files 
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.

gdb/ChangeLog:

        Update copyright year range in all GDB files.
 2017-01-01 10:52:34 +04:00
Sergio Durigan Junior
bc1e6c81d5 Consolidate target_mourn_inferior between GDB and gdbserver 
This patch consolidates the API of target_mourn_inferior between GDB
and gdbserver, in my continuing efforts to make sharing the
fork_inferior function possible between both.

GDB's version of the function did not care about the inferior's ptid
being mourned, but gdbserver's needed to know this information.  Since
it actually makes sense to pass the ptid as an argument, instead of
depending on a global value directly (which GDB's version did), I
decided to make the generic API to accept it.  I then went on and
extended all calls being made on GDB to include a ptid argument (which
ended up being inferior_ptid most of the times, anyway), and now we
have a more sane interface.

On GDB's side, after talking to Pedro a bit about it, we decided that
just an assertion to make sure that the ptid being passed is equal to
inferior_ptid would be enough for now, on the GDB side.  We can remove
the assertion and perform more operations later if we ever pass
anything different than inferior_ptid.

Regression tested on our BuildBot, everything OK.

I'd appreciate a special look at gdb/windows-nat.c's modification
because I wasn't really sure what to do there.  It seemed to me that
maybe I should build a ptid out of the process information there, but
then I am almost sure the assertion on GDB's side would trigger.

gdb/ChangeLog:
2016-09-19  Sergio Durigan Junior  <sergiodj@redhat.com>

	* darwin-nat.c (darwin_kill_inferior): Adjusting call to
	target_mourn_inferior to include ptid_t argument.
	* fork-child.c (startup_inferior): Likewise.
	* gnu-nat.c (gnu_kill_inferior): Likewise.
	* inf-ptrace.c (inf_ptrace_kill): Likewise.
	* infrun.c (handle_inferior_event_1): Likewise.
	* linux-nat.c (linux_nat_attach): Likewise.
	(linux_nat_kill): Likewise.
	* nto-procfs.c (interrupt_query): Likewise.
	(procfs_interrupt): Likewise.
	(procfs_kill_inferior): Likewise.
	* procfs.c (procfs_kill_inferior): Likewise.
	* record.c (record_mourn_inferior): Likewise.
	* remote-sim.c (gdbsim_kill): Likewise.
	* remote.c (remote_detach_1): Likewise.
	(remote_kill): Likewise.
	* target.c (target_mourn_inferior): Change declaration to accept
	new ptid_t argument; use gdb_assert on it.
	* target.h (target_mourn_inferior): Move function prototype from
	here...
	* target/target.h (target_mourn_inferior): ... to here.  Adjust it
	to accept new ptid_t argument.
	* windows-nat.c (get_windows_debug_event): Adjusting call to
	target_mourn_inferior to include ptid_t argument.

gdb/gdbserver/ChangeLog:
2016-09-19  Sergio Durigan Junior  <sergiodj@redhat.com>

	* server.c (start_inferior): Call target_mourn_inferior instead of
	mourn_inferior; pass ptid_t argument to it.
	(resume): Likewise.
	(handle_target_event): Likewise.
	* target.c (target_mourn_inferior): New function.
	* target.h (mourn_inferior): Delete macro.
 2016-09-19 00:17:29 -04:00
Pedro Alves
325fac504a gdb: Use std::min and std::max throughout 
Otherwise including <string> or some other C++ header is broken.
E.g.:

  In file included from /opt/gcc/include/c++/7.0.0/bits/char_traits.h:39:0,
		   from /opt/gcc/include/c++/7.0.0/string:40,
		   from /home/pedro/gdb/mygit/cxx-convertion/src/gdb/infrun.c:68:
  /opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:243:56: error: macro "min" passed 3 arguments, but takes just 2
       min(const _Tp& __a, const _Tp& __b, _Compare __comp)
							  ^
  /opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:265:56: error: macro "max" passed 3 arguments, but takes just 2
       max(const _Tp& __a, const _Tp& __b, _Compare __comp)
							  ^
  In file included from .../src/gdb/infrun.c:21:0:

To the best of my grepping abilities, I believe I adjusted all min/max
calls.

gdb/ChangeLog:
2016-09-16  Pedro Alves  <palves@redhat.com>

	* defs.h (min, max): Delete.
	* aarch64-tdep.c: Include <algorithm> and use std::min and
	std::max throughout.
	* aarch64-tdep.c: Likewise.
	* alpha-tdep.c: Likewise.
	* amd64-tdep.c: Likewise.
	* amd64-windows-tdep.c: Likewise.
	* arm-tdep.c: Likewise.
	* avr-tdep.c: Likewise.
	* breakpoint.c: Likewise.
	* btrace.c: Likewise.
	* ctf.c: Likewise.
	* disasm.c: Likewise.
	* doublest.c: Likewise.
	* dwarf2loc.c: Likewise.
	* dwarf2read.c: Likewise.
	* environ.c: Likewise.
	* exec.c: Likewise.
	* f-exp.y: Likewise.
	* findcmd.c: Likewise.
	* ft32-tdep.c: Likewise.
	* gcore.c: Likewise.
	* hppa-tdep.c: Likewise.
	* i386-darwin-tdep.c: Likewise.
	* i386-tdep.c: Likewise.
	* linux-thread-db.c: Likewise.
	* lm32-tdep.c: Likewise.
	* m32r-tdep.c: Likewise.
	* m88k-tdep.c: Likewise.
	* memrange.c: Likewise.
	* minidebug.c: Likewise.
	* mips-tdep.c: Likewise.
	* moxie-tdep.c: Likewise.
	* nds32-tdep.c: Likewise.
	* nios2-tdep.c: Likewise.
	* nto-procfs.c: Likewise.
	* parse.c: Likewise.
	* ppc-sysv-tdep.c: Likewise.
	* probe.c: Likewise.
	* record-btrace.c: Likewise.
	* remote.c: Likewise.
	* rs6000-tdep.c: Likewise.
	* rx-tdep.c: Likewise.
	* s390-linux-nat.c: Likewise.
	* s390-linux-tdep.c: Likewise.
	* ser-tcp.c: Likewise.
	* sh-tdep.c: Likewise.
	* sh64-tdep.c: Likewise.
	* source.c: Likewise.
	* sparc-tdep.c: Likewise.
	* symfile.c: Likewise.
	* target-memory.c: Likewise.
	* target.c: Likewise.
	* tic6x-tdep.c: Likewise.
	* tilegx-tdep.c: Likewise.
	* tracefile-tfile.c: Likewise.
	* tracepoint.c: Likewise.
	* valprint.c: Likewise.
	* value.c: Likewise.
	* xtensa-tdep.c: Likewise.
	* cli/cli-cmds.c: Likewise.
	* compile/compile-object-load.c: Likewise.
 2016-09-16 19:55:17 +01:00
Pedro Alves
7397181903 Plumb enum remove_bp_reason all the way to target_remove_breakpoint 
So the target knows whether we're detaching breakpoints.
Nothing uses the parameter in this patch yet.

gdb/ChangeLog:
2016-08-10  Pedro Alves  <palves@redhat.com>

	PR gdb/19187
	* break-catch-sig.c (signal_catchpoint_remove_location): Adjust
	interface.
	* break-catch-syscall.c (remove_catch_syscall):
	* breakpoint.c (enum remove_bp_reason): Moved to breakpoint.h.
	(remove_breakpoint_1): Pass 'reason' down.
	(remove_catch_fork, remove_catch_vfork, remove_catch_solib)
	(remove_catch_exec, remove_watchpoint, remove_masked_watchpoint)
	(base_breakpoint_remove_location, bkpt_remove_location)
	(bkpt_probe_remove_location, bkpt_probe_remove_location): Adjust
	interface.
	* breakpoint.h (enum remove_bp_reason): Moved here from
	breakpoint.c.
	(struct breakpoint_ops) <remove_location>: Add 'reason' parameter.
	* corelow.c (core_remove_breakpoint): New function.
	(init_core_ops): Install it as to_remove_breakpoint method.
	* exec.c (exec_remove_breakpoint): New function.
	(init_exec_ops): Install it as to_remove_breakpoint method.
	* mem-break.c (memory_remove_breakpoint): Adjust interface.
	* record-btrace.c (record_btrace_remove_breakpoint): Adjust
	interface.
	* record-full.c (record_full_remove_breakpoint)
	(record_full_core_remove_breakpoint): Adjust interface.
	* remote.c (remote_remove_breakpoint): Adjust interface.
	* target-debug.h (target_debug_print_enum_remove_bp_reason): New
	macro.
	* target-delegates.c: Regenerate.
	* target.c (target_remove_breakpoint): Add 'reason' parameter.
	* target.h (struct target_ops) <to_remove_breakpoint>: Add
	'reason' parameter.
	(target_remove_breakpoint, memory_remove_breakpoint): Add 'reason'
	parameter.
 2016-08-10 23:03:29 +01:00
Pedro Alves
0f48b75707 Factor out "Detaching from program" message printing 
Several targets have a copy of the same code that prints

 "Detaching from program ..."

in their target_detach implementation.  Factor that out to a common
function.

(For now, I left the couple targets that print this a bit differently
alone.  Maybe this could be further pulled out into infcmd.c.  If we
did that, and those targets want to continue printing differently,
this new function could be converted to a target method.)

gdb/ChangeLog:
2016-07-01  Pedro Alves  <palves@redhat.com>

	* darwin-nat.c (darwin_detach): Use target_announce_detach.
	* inf-ptrace.c (inf_ptrace_detach): Likewise.
	* nto-procfs.c (procfs_detach): Likewise.
	* remote.c (remote_detach_1): Likewise.
	* target.c (target_announce_detach): New function.
	* target.h (target_announce_detach): New declaration.
 2016-07-01 11:25:50 +01:00
Pedro Alves
651ce16aa7 Do target_terminal_ours in query & friends instead of in all callers 
Any time a caller calls query & friends / prompt_for_continue without
ensuring that gdb owns the terminal for input is a bug.  So do that in
defaulted_query / prompt_for_continue directly instead.

An example of a case where we currently miss calling
target_terminal_ours is internal_error.  Ever since defaulted_query
was made to use gdb_readline_callback, there's no way to answer the
internal error query if the internal error happens while the target is
has the terminal:

  (gdb) c
  Continuing.
  .../src/gdb/linux-nat.c:1676: internal-error: linux_nat_resume: Assertion `dummy_counter < 10' failed.
  A problem internal to GDB has been detected,
  further debugging may prove unreliable.
  Quit this debugging session? (y or n) _

Entering 'y' or 'n' does not work, GDB does not respond.

gdb/ChangeLog:
2016-04-12  Pedro Alves  <palves@redhat.com>

	PR gdb/19828
	* gnu-nat.c (inf_validate_task_sc): Don't call
	target_terminal_ours / target_terminal_inferior around query.
	* i386-tdep.c (i386_record_lea_modrm, i386_process_record): Don't
	call target_terminal_ours / target_terminal_inferior around
	yquery.
	* linux-record.c (record_linux_system_call): Don't call
	target_terminal_ours / target_terminal_inferior around yquery.
	* nto-procfs.c (interrupt_query): Don't call target_terminal_ours
	/ target_terminal_inferior around query.
	* record-full.c (record_full_check_insn_num): Remove
	'set_terminal' parameter.  Don't call target_terminal_ours /
	target_terminal_inferior around query.
	(record_full_message, record_full_registers_change)
	(record_full_xfer_partial): Adjust.
	* remote.c (interrupt_query): Don't call target_terminal_ours /
	target_terminal_inferior around query.
	* utils.c (defaulted_query): Install cleanup to restore target
	terminal.  Put target_terminal_ours_for_output in effect while
	defaulted producing, and target_terminal_ours in in effect while
	handling input.
	(prompt_for_continue): Install cleanup to restore target terminal.
	Put target_terminal_ours in in effect while handling input.
 2016-04-12 17:00:01 +01:00
Joel Brobecker
618f726fcb GDB copyright headers update after running GDB's copyright.py script. 
gdb/ChangeLog:

        Update year range in copyright notice of all files.
 2016-01-01 08:43:22 +04:00
Aleksandar Ristovski
a9889169e5 [nto] Fix nto target stopped by watchpoint. 
Fix 'stopped by watchpoint' detection: add inferior data, use inferior data
for storing last stopped flags needed for detection.

gdb/ChangeLog:

	* nto-procfs.c (procfs_wait): Set stopped_flags nad stopped_pc.
	(procfs_stopped_by_watchpoint): Use flags stored in inferior data.
	* nto-tdep.c (nto_new_inferior_data_reg): New definition.
	(nto_new_inferior_data, nto_inferior_data_cleanup, nto_inferior_data):
	New functions.
	(_initialize_nto_tdep): New forward declaration, new function.
	* nto-tdep.h (struct nto_inferior_data): New struct.
	(nto_inferior_data): New function declaration.
 2015-10-21 10:37:33 -04:00
Aleksandar Ristovski
e5343fde20 [nto] Implement procfs_pid_to_exec_file. 
gdb/ChangeLog:

	* gdb/nto-procfs.c (procfs_pid_to_exec_file): New function.
	(init_procfs_targets): Wire new function.
 2015-10-20 13:11:53 -04:00
Aleksandar Ristovski
8a6c0ccdd2 [nto] Implement TARGET_OBJECT_AUXV. 
Fix 'info auxv' for nto.

gdb/ChangeLog:

	* nto-procfs.c (sys/auxv.h): Include.
	(procfs_xfer_partial): Implement TARGET_OBJECT_AUXV.
	* nto-tdep.c (nto_read_auxv_from_initial_stack): New function.
	* nto-tdep.h (nto_read_auxv_from_initial_stack): New declaration.
 2015-10-20 13:02:33 -04:00
Aleksandar Ristovski
609c3040c2 [nto] Fixes for nto procfs. 
Fix errnoeus construction of procfs path. The issue is, after the first
info pidlist or first run, the path for local node (the most common node)
will be reset to empty which makes subsequent queries and runs impossible.

gdb/ChangeLog:

	* nto-procfs.c (nto_procfs_path): Rename to...
	(nodestr): ... this, and change type.
	(nto_node): Use new variable and logic accordingly.
	(procfs_open_1): Use new variable name. Use local buffer to construct
	procfrs path.
	(procfs_pidlist): Use NODESTR to construct procfs path.
	(procfs_files_info): Use NODESTR to output meaningful text.
	(do_attach): Construct procfs using NODESTR.
	(procfs_create_inferior): Compare pointer to NULL.
 2015-10-20 13:02:09 -04:00
Aleksandar Ristovski
774ee6d252 [nto] Fix nto build. 
gdb/gdbserver/ChangeLog:

	* gdbserver/nto-low.c (nto_insert_point, nto_remove_point): Fix
	variable name.

gdb/ChangeLog:

	* nto-procfs.c (common/filestuff.h): Include.
	(procfs_can_use_hw_breakpoint): Fix enum name.
	(procfs_open_1): Fix compiler warning.
	(procfs_pidlist): Make static.
	(procfs_meminfo): Make static, fix type name, add missing argument.
	(procfs_store_registers): Make static.
	(procfs_thread_info): Remove unused function.
	(_initialize_procfs): Forward declare.
 2015-10-16 11:49:03 -04:00
Pedro Alves
a40805d4a7 gdb: Use sighandler_t everywhere 
This fixes 14 build errors like these in C++ mode:

 src/gdb/extension.c: In function ‘void install_sigint_handler(const signal_handler*)’:
 src/gdb/extension.c:698:41: error: invalid conversion from ‘void (*)()’ to ‘__sighandler_t {aka void (*)(int)}’ [-fpermissive]
    signal (SIGINT, handler_state->handler);
					  ^
 In file included from build-gnulib/import/signal.h:52:0,
		  from ../../src/gdb/extension.c:24:
 /usr/include/signal.h:102:23: error:   initializing argument 2 of ‘void (* signal(int, __sighandler_t))(int)’ [-fpermissive]
  extern __sighandler_t signal (int __sig, __sighandler_t __handler)
			^

Instead of this everywhere:

 -  RETSIGTYPE (*handle_sigint_for_compare) () = handle_sigint;
 +  RETSIGTYPE (*handle_sigint_for_compare) (int) = handle_sigint;

Use sighandler_t (a GNU extension).  That's OK to use unconditionaly
because gnulib's signal.h replacement makes sure that it is available.

gdb/ChangeLog:
2015-08-27  Pedro Alves  <palves@redhat.com>

	* cp-support.c (gdb_demangle): Use sighandler_t.  Remove cast.
	* extension-priv.h: Include signal.h.
	(struct signal_handler) <handler>: Change type to sighandler_t.
	* extension.c (install_gdb_sigint_handler): Use sighandler_t.
	* inflow.c (sigint_ours, sigquit_ours): Change type to
	sighandler_t.
	(child_terminal_inferior): Remove casts.
	(child_terminal_ours_1, new_tty): Use sighandler_t.  Remove casts.
	(osig): Change type to sighandler_t.
	* nto-procfs.c (ofunc): Change type to sighandler_t.
	(procfs_wait): Remove casts.
	* remote-m32r-sdi.c (m32r_wait, m32r_load): Use sighandler_t.
	* remote-sim.c (gdbsim_wait): Use sighandler_t.
	* utils.c (wait_to_die_with_timeout): Use sighandler_t.
 2015-08-27 13:26:23 +01:00
Simon Marchi
8d7493201c Replace some xmalloc-family functions with XNEW-family ones 
This patch is part of the make-gdb-buildable-in-C++ effort.  The idea is
to change some calls to the xmalloc family of functions to calls to the
equivalents in the XNEW family.  This avoids adding an explicit cast, so
it keeps the code a bit more readable.  Some of them also map relatively
well to a C++ equivalent (XNEW (struct foo) -> new foo), so it will be
possible to do scripted replacements if needed.

I only changed calls that were obviously allocating memory for one or
multiple "objects".  Allocation of variable sizes (such as strings or
buffer handling) will be for later (and won't use XNEW).

  - xmalloc (sizeof (struct foo)) -> XNEW (struct foo)
  - xmalloc (num * sizeof (struct foo)) -> XNEWVEC (struct foo, num)
  - xcalloc (1, sizeof (struct foo)) -> XCNEW (struct foo)
  - xcalloc (num, sizeof (struct foo)) -> XCNEWVEC (struct foo, num)
  - xrealloc (p, num * sizeof (struct foo) -> XRESIZEVEC (struct foo, p, num)
  - obstack_alloc (ob, sizeof (struct foo)) -> XOBNEW (ob, struct foo)
  - obstack_alloc (ob, num * sizeof (struct foo)) -> XOBNEWVEC (ob, struct foo, num)
  - alloca (sizeof (struct foo)) -> XALLOCA (struct foo)
  - alloca (num * sizeof (struct foo)) -> XALLOCAVEC (struct foo, num)

Some instances of xmalloc followed by memset to zero the buffer were
replaced by XCNEW or XCNEWVEC.

I regtested on x86-64, Ubuntu 14.04, but the patch touches many
architecture-specific files.  For those I'll have to rely on the
buildbot or people complaining that I broke their gdb.

gdb/ChangeLog:

	* aarch64-linux-nat.c (aarch64_add_process): Likewise.
	* aarch64-tdep.c (aarch64_gdbarch_init): Likewise.
	* ada-exp.y (write_ambiguous_var): Likewise.
	* ada-lang.c (resolve_subexp): Likewise.
	(user_select_syms): Likewise.
	(assign_aggregate): Likewise.
	(ada_evaluate_subexp): Likewise.
	(cache_symbol): Likewise.
	* addrmap.c (allocate_key): Likewise.
	(addrmap_create_mutable): Likewise.
	* aix-thread.c (sync_threadlists): Likewise.
	* alpha-tdep.c (alpha_push_dummy_call): Likewise.
	(alpha_gdbarch_init): Likewise.
	* amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise.
	* arm-linux-nat.c (arm_linux_add_process): Likewise.
	* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise.
	* arm-tdep.c (push_stack_item): Likewise.
	(arm_displaced_step_copy_insn): Likewise.
	(arm_gdbarch_init): Likewise.
	(_initialize_arm_tdep): Likewise.
	* avr-tdep.c (push_stack_item): Likewise.
	* ax-general.c (new_agent_expr): Likewise.
	* block.c (block_initialize_namespace): Likewise.
	* breakpoint.c (alloc_counted_command_line): Likewise.
	(update_dprintf_command_list): Likewise.
	(parse_breakpoint_sals): Likewise.
	(decode_static_tracepoint_spec): Likewise.
	(until_break_command): Likewise.
	(clear_command): Likewise.
	(update_global_location_list): Likewise.
	(get_breakpoint_objfile_data) Likewise.
	* btrace.c (ftrace_new_function): Likewise.
	(btrace_set_insn_history): Likewise.
	(btrace_set_call_history): Likewise.
	* buildsym.c (add_symbol_to_list): Likewise.
	(record_pending_block): Likewise.
	(start_subfile): Likewise.
	(start_buildsym_compunit): Likewise.
	(push_subfile): Likewise.
	(end_symtab_get_static_block): Likewise.
	(buildsym_init): Likewise.
	* cli/cli-cmds.c (source_command): Likewise.
	* cli/cli-decode.c (add_cmd): Likewise.
	* cli/cli-script.c (build_command_line): Likewise.
	(setup_user_args): Likewise.
	(realloc_body_list): Likewise.
	(process_next_line): Likewise.
	(copy_command_lines): Likewise.
	* cli/cli-setshow.c (do_set_command): Likewise.
	* coff-pe-read.c (read_pe_exported_syms): Likewise.
	* coffread.c (coff_locate_sections): Likewise.
	(coff_symtab_read): Likewise.
	(coff_read_struct_type): Likewise.
	* common/cleanups.c (make_my_cleanup2): Likewise.
	* common/common-exceptions.c (throw_it): Likewise.
	* common/filestuff.c (make_cleanup_close): Likewise.
	* common/format.c (parse_format_string): Likewise.
	* common/queue.h (DEFINE_QUEUE_P): Likewise.
	* compile/compile-object-load.c (munmap_list_add): Likewise.
	(compile_object_load): Likewise.
	* compile/compile-object-run.c (compile_object_run): Likewise.
	* compile/compile.c (append_args): Likewise.
	* corefile.c (specify_exec_file_hook): Likewise.
	* cp-support.c (make_symbol_overload_list): Likewise.
	* cris-tdep.c (push_stack_item): Likewise.
	(cris_gdbarch_init): Likewise.
	* ctf.c (ctf_trace_file_writer_new): Likewise.
	* dbxread.c (init_header_files): Likewise.
	(add_new_header_file): Likewise.
	(init_bincl_list): Likewise.
	(dbx_end_psymtab): Likewise.
	(start_psymtab): Likewise.
	(dbx_end_psymtab): Likewise.
	* dcache.c (dcache_init): Likewise.
	* dictionary.c (dict_create_hashed): Likewise.
	(dict_create_hashed_expandable): Likewise.
	(dict_create_linear): Likewise.
	(dict_create_linear_expandable): Likewise.
	* dtrace-probe.c (dtrace_process_dof_probe): Likewise.
	* dummy-frame.c (register_dummy_frame_dtor): Likewise.
	* dwarf2-frame-tailcall.c (cache_new_ref1): Likewise.
	* dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
	(decode_frame_entry_1): Likewise.
	* dwarf2expr.c (new_dwarf_expr_context): Likewise.
	* dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
	* dwarf2read.c (dwarf2_has_info): Likewise.
	(create_signatured_type_table_from_index): Likewise.
	(dwarf2_read_index): Likewise.
	(dw2_get_file_names_reader): Likewise.
	(create_all_type_units): Likewise.
	(read_cutu_die_from_dwo): Likewise.
	(init_tu_and_read_dwo_dies): Likewise.
	(init_cutu_and_read_dies): Likewise.
	(create_all_comp_units): Likewise.
	(queue_comp_unit): Likewise.
	(inherit_abstract_dies): Likewise.
	(read_call_site_scope): Likewise.
	(dwarf2_add_field): Likewise.
	(dwarf2_add_typedef): Likewise.
	(dwarf2_add_member_fn): Likewise.
	(attr_to_dynamic_prop): Likewise.
	(abbrev_table_alloc_abbrev): Likewise.
	(abbrev_table_read_table): Likewise.
	(add_include_dir): Likewise.
	(add_file_name): Likewise.
	(dwarf_decode_line_header): Likewise.
	(dwarf2_const_value_attr): Likewise.
	(dwarf_alloc_block): Likewise.
	(parse_macro_definition): Likewise.
	(set_die_type): Likewise.
	(write_psymtabs_to_index): Likewise.
	(create_cus_from_index): Likewise.
	(dwarf2_create_include_psymtab): Likewise.
	(process_psymtab_comp_unit_reader): Likewise.
	(build_type_psymtab_dependencies): Likewise.
	(read_comp_units_from_section): Likewise.
	(compute_compunit_symtab_includes): Likewise.
	(create_dwo_unit_in_dwp_v1): Likewise.
	(create_dwo_unit_in_dwp_v2): Likewise.
	(read_func_scope): Likewise.
	(process_structure_scope): Likewise.
	(mark_common_block_symbol_computed): Likewise.
	(load_partial_dies): Likewise.
	(dwarf2_symbol_mark_computed): Likewise.
	* elfread.c (elf_symfile_segments): Likewise.
	(elf_read_minimal_symbols): Likewise.
	* environ.c (make_environ): Likewise.
	* eval.c (evaluate_subexp_standard): Likewise.
	* event-loop.c (create_file_handler): Likewise.
	(create_async_signal_handler): Likewise.
	(create_async_event_handler): Likewise.
	(create_timer): Likewise.
	* exec.c (build_section_table): Likewise.
	* fbsd-nat.c (fbsd_remember_child): Likewise.
	* fork-child.c (fork_inferior): Likewise.
	* frv-tdep.c (new_variant): Likewise.
	* gdbarch.sh (gdbarch_alloc): Likewise.
	(append_name): Likewise.
	* gdbtypes.c (rank_function): Likewise.
	(copy_type_recursive): Likewise.
	(add_dyn_prop): Likewise.
	* gnu-nat.c (make_proc): Likewise.
	(make_inf): Likewise.
	(gnu_write_inferior): Likewise.
	* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
	(build_std_type_info_type): Likewise.
	* guile/scm-param.c (compute_enum_list): Likewise.
	* guile/scm-utils.c (gdbscm_parse_function_args): Likewise.
	* guile/scm-value.c (gdbscm_value_call): Likewise.
	* h8300-tdep.c (h8300_gdbarch_init): Likewise.
	* hppa-tdep.c (hppa_init_objfile_priv_data): Likewise.
	(read_unwind_info): Likewise.
	* ia64-tdep.c (ia64_gdbarch_init): Likewise.
	* infcall.c (dummy_frame_context_saver_setup): Likewise.
	(call_function_by_hand_dummy): Likewise.
	* infcmd.c (step_once): Likewise.
	(finish_forward): Likewise.
	(attach_command): Likewise.
	(notice_new_inferior): Likewise.
	* inferior.c (add_inferior_silent): Likewise.
	* infrun.c (add_displaced_stepping_state): Likewise.
	(save_infcall_control_state): Likewise.
	(save_inferior_ptid): Likewise.
	(_initialize_infrun): Likewise.
	* jit.c (bfd_open_from_target_memory): Likewise.
	(jit_gdbarch_data_init): Likewise.
	* language.c (add_language): Likewise.
	* linespec.c (decode_line_2): Likewise.
	* linux-nat.c (add_to_pid_list): Likewise.
	(add_initial_lwp): Likewise.
	* linux-thread-db.c (add_thread_db_info): Likewise.
	(record_thread): Likewise.
	(info_auto_load_libthread_db): Likewise.
	* m32c-tdep.c (m32c_gdbarch_init): Likewise.
	* m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise.
	* m68k-tdep.c (m68k_gdbarch_init): Likewise.
	* m88k-tdep.c (m88k_analyze_prologue): Likewise.
	* macrocmd.c (macro_define_command): Likewise.
	* macroexp.c (gather_arguments): Likewise.
	* macroscope.c (sal_macro_scope): Likewise.
	* macrotab.c (new_macro_table): Likewise.
	* mdebugread.c (push_parse_stack): Likewise.
	(parse_partial_symbols): Likewise.
	(parse_symbol): Likewise.
	(psymtab_to_symtab_1): Likewise.
	(new_block): Likewise.
	(new_psymtab): Likewise.
	(mdebug_build_psymtabs): Likewise.
	(add_pending): Likewise.
	(elfmdebug_build_psymtabs): Likewise.
	* mep-tdep.c (mep_gdbarch_init): Likewise.
	* mi/mi-main.c (mi_execute_command): Likewise.
	* mi/mi-parse.c (mi_parse_argv): Likewise.
	* minidebug.c (lzma_open): Likewise.
	* minsyms.c (terminate_minimal_symbol_table): Likewise.
	* mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise.
	* mips-tdep.c (mips_gdbarch_init): Likewise.
	* mn10300-tdep.c (mn10300_gdbarch_init): Likewise.
	* msp430-tdep.c (msp430_gdbarch_init): Likewise.
	* mt-tdep.c (mt_registers_info): Likewise.
	* nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise.
	* nat/linux-btrace.c (linux_enable_bts): Likewise.
	(linux_enable_pt): Likewise.
	* nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise.
	(linux_xfer_osdata_processgroups): Likewise.
	* nios2-tdep.c (nios2_gdbarch_init): Likewise.
	* nto-procfs.c (procfs_meminfo): Likewise.
	* objc-lang.c (start_msglist): Likewise.
	(selectors_info): Likewise.
	(classes_info): Likewise.
	(find_methods): Likewise.
	* objfiles.c (allocate_objfile): Likewise.
	(update_section_map): Likewise.
	* osabi.c (gdbarch_register_osabi): Likewise.
	(gdbarch_register_osabi_sniffer): Likewise.
	* parse.c (start_arglist): Likewise.
	* ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise.
	(hwdebug_insert_point): Likewise.
	* printcmd.c (display_command): Likewise.
	(ui_printf): Likewise.
	* procfs.c (create_procinfo): Likewise.
	(load_syscalls): Likewise.
	(proc_get_LDT_entry): Likewise.
	(proc_update_threads): Likewise.
	* prologue-value.c (make_pv_area): Likewise.
	(pv_area_store): Likewise.
	* psymtab.c (extend_psymbol_list): Likewise.
	(init_psymbol_list): Likewise.
	(allocate_psymtab): Likewise.
	* python/py-inferior.c (add_thread_object): Likewise.
	* python/py-param.c (compute_enum_values): Likewise.
	* python/py-value.c (valpy_call): Likewise.
	* python/py-varobj.c (py_varobj_iter_next): Likewise.
	* python/python.c (ensure_python_env): Likewise.
	* record-btrace.c (record_btrace_start_replaying): Likewise.
	* record-full.c (record_full_reg_alloc): Likewise.
	(record_full_mem_alloc): Likewise.
	(record_full_end_alloc): Likewise.
	(record_full_core_xfer_partial): Likewise.
	* regcache.c (get_thread_arch_aspace_regcache): Likewise.
	* remote-fileio.c (remote_fileio_init_fd_map): Likewise.
	* remote-notif.c (remote_notif_state_allocate): Likewise.
	* remote.c (demand_private_info): Likewise.
	(remote_notif_stop_alloc_reply): Likewise.
	(remote_enable_btrace): Likewise.
	* reverse.c (save_bookmark_command): Likewise.
	* rl78-tdep.c (rl78_gdbarch_init): Likewise.
	* rx-tdep.c (rx_gdbarch_init): Likewise.
	* s390-linux-nat.c (s390_insert_watchpoint): Likewise.
	* ser-go32.c (dos_get_tty_state): Likewise.
	(dos_copy_tty_state): Likewise.
	* ser-mingw.c (ser_windows_open): Likewise.
	(ser_console_wait_handle): Likewise.
	(ser_console_get_tty_state): Likewise.
	(make_pipe_state): Likewise.
	(net_windows_open): Likewise.
	* ser-unix.c (hardwire_get_tty_state): Likewise.
	(hardwire_copy_tty_state): Likewise.
	* solib-aix.c (solib_aix_new_lm_info): Likewise.
	* solib-dsbt.c (dsbt_current_sos): Likewise.
	(dsbt_relocate_main_executable): Likewise.
	* solib-frv.c (frv_current_sos): Likewise.
	(frv_relocate_main_executable): Likewise.
	* solib-spu.c (spu_bfd_fopen): Likewise.
	* solib-svr4.c (lm_info_read): Likewise.
	(svr4_copy_library_list): Likewise.
	(svr4_default_sos): Likewise.
	* source.c (find_source_lines): Likewise.
	(line_info): Likewise.
	(add_substitute_path_rule): Likewise.
	* spu-linux-nat.c (spu_bfd_open): Likewise.
	* spu-tdep.c (info_spu_dma_cmdlist): Likewise.
	* stabsread.c (dbx_lookup_type): Likewise.
	(read_type): Likewise.
	(read_member_functions): Likewise.
	(read_struct_fields): Likewise.
	(read_baseclasses): Likewise.
	(read_args): Likewise.
	(_initialize_stabsread): Likewise.
	* stack.c (func_command): Likewise.
	* stap-probe.c (handle_stap_probe): Likewise.
	* symfile.c (addrs_section_sort): Likewise.
	(addr_info_make_relative): Likewise.
	(load_section_callback): Likewise.
	(add_symbol_file_command): Likewise.
	(init_filename_language_table): Likewise.
	* symtab.c (create_filename_seen_cache): Likewise.
	(sort_search_symbols_remove_dups): Likewise.
	(search_symbols): Likewise.
	* target.c (make_cleanup_restore_target_terminal): Likewise.
	* thread.c (new_thread): Likewise.
	(enable_thread_stack_temporaries): Likewise.
	(make_cleanup_restore_current_thread): Likewise.
	(thread_apply_all_command): Likewise.
	* tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
	* top.c (gdb_readline_wrapper): Likewise.
	* tracefile-tfile.c (tfile_trace_file_writer_new): Likewise.
	* tracepoint.c (trace_find_line_command): Likewise.
	(all_tracepoint_actions_and_cleanup): Likewise.
	(make_cleanup_restore_current_traceframe): Likewise.
	(get_uploaded_tp): Likewise.
	(get_uploaded_tsv): Likewise.
	* tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
	(tui_alloc_win_info): Likewise.
	(tui_alloc_content): Likewise.
	(tui_add_content_elements): Likewise.
	* tui/tui-disasm.c (tui_find_disassembly_address): Likewise.
	(tui_set_disassem_content): Likewise.
	* ui-file.c (ui_file_new): Likewise.
	(stdio_file_new): Likewise.
	(tee_file_new): Likewise.
	* utils.c (make_cleanup_restore_integer): Likewise.
	(add_internal_problem_command): Likewise.
	* v850-tdep.c (v850_gdbarch_init): Likewise.
	* valops.c (find_oload_champ): Likewise.
	* value.c (allocate_value_lazy): Likewise.
	(record_latest_value): Likewise.
	(create_internalvar): Likewise.
	* varobj.c (install_variable): Likewise.
	(new_variable): Likewise.
	(new_root_variable): Likewise.
	(cppush): Likewise.
	(_initialize_varobj): Likewise.
	* windows-nat.c (windows_make_so): Likewise.
	* x86-nat.c (x86_add_process): Likewise.
	* xcoffread.c (arrange_linetable): Likewise.
	(allocate_include_entry): Likewise.
	(process_linenos): Likewise.
	(SYMBOL_DUP): Likewise.
	(xcoff_start_psymtab): Likewise.
	(xcoff_end_psymtab): Likewise.
	* xml-support.c (gdb_xml_parse_attr_ulongest): Likewise.
	* xtensa-tdep.c (xtensa_register_type): Likewise.
	* gdbarch.c: Regenerate.
	* gdbarch.h: Regenerate.

gdb/gdbserver/ChangeLog:

	* ax.c (gdb_parse_agent_expr): Likewise.
	(compile_bytecodes): Likewise.
	* dll.c (loaded_dll): Likewise.
	* event-loop.c (append_callback_event): Likewise.
	(create_file_handler): Likewise.
	(create_file_event): Likewise.
	* hostio.c (handle_open): Likewise.
	* inferiors.c (add_thread): Likewise.
	(add_process): Likewise.
	* linux-aarch64-low.c (aarch64_linux_new_process): Likewise.
	* linux-arm-low.c (arm_new_process): Likewise.
	(arm_new_thread): Likewise.
	* linux-low.c (add_to_pid_list): Likewise.
	(linux_add_process): Likewise.
	(handle_extended_wait): Likewise.
	(add_lwp): Likewise.
	(enqueue_one_deferred_signal): Likewise.
	(enqueue_pending_signal): Likewise.
	(linux_resume_one_lwp_throw): Likewise.
	(linux_resume_one_thread): Likewise.
	(linux_read_memory): Likewise.
	(linux_write_memory): Likewise.
	* linux-mips-low.c (mips_linux_new_process): Likewise.
	(mips_linux_new_thread): Likewise.
	(mips_add_watchpoint): Likewise.
	* linux-x86-low.c (initialize_low_arch): Likewise.
	* lynx-low.c (lynx_add_process): Likewise.
	* mem-break.c (set_raw_breakpoint_at): Likewise.
	(set_breakpoint): Likewise.
	(add_condition_to_breakpoint): Likewise.
	(add_commands_to_breakpoint): Likewise.
	(clone_agent_expr): Likewise.
	(clone_one_breakpoint): Likewise.
	* regcache.c (new_register_cache): Likewise.
	* remote-utils.c (look_up_one_symbol): Likewise.
	* server.c (queue_stop_reply): Likewise.
	(start_inferior): Likewise.
	(queue_stop_reply_callback): Likewise.
	(handle_target_event): Likewise.
	* spu-low.c (fetch_ppc_memory): Likewise.
	(store_ppc_memory): Likewise.
	* target.c (set_target_ops): Likewise.
	* thread-db.c (thread_db_load_search): Likewise.
	(try_thread_db_load_1): Likewise.
	* tracepoint.c (add_tracepoint): Likewise.
	(add_tracepoint_action): Likewise.
	(create_trace_state_variable): Likewise.
	(cmd_qtdpsrc): Likewise.
	(cmd_qtro): Likewise.
	(add_while_stepping_state): Likewise.
	* win32-low.c (child_add_thread): Likewise.
	(get_image_name): Likewise.
 2015-08-26 17:18:12 -04:00
Pedro Alves
bfedc46af3 Fix interrupt-noterm.exp on targets always in non-stop 
With "maint set target-non-stop on" we get:

 @@ -66,13 +66,16 @@ Continuing.
  interrupt
  (gdb) PASS: gdb.base/interrupt-noterm.exp: interrupt

 -Program received signal SIGINT, Interrupt.
 -PASS: gdb.base/interrupt-noterm.exp: inferior received SIGINT
 -testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 0 seconds
 +[process 12119] #1 stopped.
 +0x0000003615ebc6d0 in __nanosleep_nocancel () at ../sysdeps/unix/syscall-template.S:81
 +81     T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
 +FAIL: gdb.base/interrupt-noterm.exp: inferior received SIGINT (timeout)
 +testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 10 seconds

That is, we get "[$thread] #1 stopped" instead of SIGINT.

The issue is that we don't currently distinguish send
"interrupt/ctrl-c" to target terminal vs "stop/pause" thread well;
both cases go through "target_stop".

And then, the native Linux backend (linux-nat.c) implements
target_stop with SIGSTOP in non-stop mode, and SIGINT in all-stop
mode.  Since "maint set target-non-stop on" forces the backend to be
always running in non-stop mode, even though the user-visible behavior
is "set non-stop" is "off", "interrupt" causes a SIGSTOP instead of
the SIGINT the test expects.

Fix this by introducing a target_interrupt method to use in the
"interrupt/ctrl-c" case, so "set non-stop off" can always work the
same irrespective of "maint set target-non-stop on/off".  I'm
explictly considering changing the "set non-stop on" behavior as out
of scope here.

Most of the patch is an across-the-board rename of to_stop hook
implementations to to_interrupt.  The only targets where something
more than a rename is being done are linux-nat.c and remote.c, which
are the only targets that support async, and thus are the only ones
the core side calls target_stop on.

gdb/ChangeLog:
2015-08-07  Pedro Alves  <palves@redhat.com>

	* darwin-nat.c (darwin_stop): Rename to ...
	(darwin_interrupt): ... this.
	(_initialize_darwin_inferior): Adjust.
	* gnu-nat.c (gnu_stop): Delete.
	(gnu_target): Don't install gnu_stop.
	* inf-ptrace.c (inf_ptrace_stop): Rename to ...
	(inf_ptrace_interrupt): ... this.
	(inf_ptrace_target): Adjust.
	* infcmd.c (interrupt_target_1): Use target_interrupt instead of
	target_stop.
	* linux-nat (linux_nat_stop): Rename to ...
	(linux_nat_interrupt): ... this.
	(linux_nat_stop): Reimplement.
	(linux_nat_add_target): Install linux_nat_interrupt.
	* nto-procfs.c (nto_interrupt_twice): Rename to ...
	(nto_handle_sigint_twice): ... this.
	(nto_interrupt): Rename to ...
	(nto_handle_sigint): ... this.  Call target_interrupt instead of
	target_stop.
	(procfs_wait): Adjust.
	(procfs_stop): Rename to ...
	(procfs_interrupt): ... this.
	(init_procfs_targets): Adjust.
	* procfs.c (procfs_stop): Rename to ...
	(procfs_interrupt): ... this.
	(procfs_target): Adjust.
	* remote-m32r-sdi.c (m32r_stop): Rename to ...
	(m32r_interrupt): ... this.
	(init_m32r_ops): Adjust.
	* remote-sim.c (gdbsim_stop_inferior): Rename to ...
	(gdbsim_interrupt_inferior): ... this.
	(gdbsim_stop): Rename to ...
	(gdbsim_interrupt): ... this.
	(gdbsim_cntrl_c): Adjust.
	(init_gdbsim_ops): Adjust.
	* remote.c (sync_remote_interrupt): Adjust comments.
	(remote_stop_as): Rename to ...
	(remote_interrupt_as): ... this.
	(remote_stop): Adjust comment.
	(remote_interrupt): New function.
	(init_remote_ops): Install remote_interrupt.
	* target.c (target_interrupt): New function.
	* target.h (struct target_ops) <to_interrupt>: New field.
	(target_interrupt): New declaration.
	* windows-nat.c (windows_stop): Rename to ...
	(windows_interrupt): ... this.
	* target-delegates.c: Regenerate.
 2015-08-07 17:26:20 +01:00
Simon Marchi
f486487f55 Mostly trivial enum fixes 
This is a patch I extracted from Pedro's C++ branch.  It contains the
most trivial enum fixes, where an integer type/value was used instead
of the appropriate enum type/value.  It fixes many C++ errors, since
in C++ you can't mix integers and enums implicitely.

Regardless of the C++ conversion, I think this is a good cleanup to make
use of the appropriate enum types.

Regression-tested on native x86_64.

gdb/ChangeLog:

	* aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Use enum
	type or value instead of integer.
	(aarch64_linux_insert_watchpoint): Likewise.
	(aarch64_linux_remove_watchpoint): Likewise.
	* ada-lang.c (ada_op_print_tab): Likewise.
	* amd64-linux-tdep.c (amd64_canonicalize_syscall): Likewise.
	(amd64_linux_syscall_record_common): Likewise.
	* arch-utils.c (target_byte_order_user): Likewise.
	(default_byte_order): Likewise.
	* arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Likewise.
	(arm_linux_get_hwbp_type): Likewise.
	(arm_linux_hw_watchpoint_initialize): Likewise.
	(arm_linux_insert_watchpoint): Likewise.
	* arm-linux-tdep.c (arm_canonicalize_syscall): Likewise.
	(arm_linux_syscall_record): Likewise.
	* breakpoint.c (update_watchpoint): Likewise.
	(breakpoint_here_p): Likewise.
	(bpstat_print): Likewise.
	(enable_breakpoint_disp): Likewise.
	* c-lang.c (c_op_print_tab): Likewise.
	* cli/cli-decode.c (add_info_alias): Likewise.
	* d-lang.c (d_op_print_tab): Likewise.
	* eval.c (evaluate_subexp_standard): Likewise.
	* f-exp.y (dot_ops): Likewise.
	(f77_keywords): Likewise.
	* f-lang.c (f_op_print_tab): Likewise.
	* go-lang.c (go_op_print_tab): Likewise.
	* guile/scm-breakpoint.c (gdbscm_make_breakpoint): Likewise.
	* guile/scm-cmd.c (gdbscm_make_command): Likewise.
	* guile/scm-param.c (gdbscm_make_parameter): Likewise.
	* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer): Likewise.
	* guile/scm-string.c (struct scm_to_stringn_data): Likewise.
	(struct scm_from_stringn_data): Likewise.
	* i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
	* ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
	(ia64_linux_remove_watchpoint): Likewise.
	(ia64_linux_can_use_hw_breakpoint): Likewise.
	* infrun.c (print_stop_event): Likewise.
	* jv-lang.c (java_op_print_tab): Likewise.
	* linux-nat.c (linux_proc_xfer_partial): Likewise.
	* linux-nat.h (struct lwp_info): Likewise.
	* linux-thread-db.c (enable_thread_event): Likewise.
	* m2-lang.c (m2_op_print_tab): Likewise.
	* mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
	(mi_cmd_stack_list_variables): Likewise.
	* mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
	* mi/mi-out.c (mi_table_begin): Likewise.
	(mi_table_header): Likewise.
	* mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Likewise.
	(mips_linux_insert_watchpoint): Likewise.
	(mips_linux_remove_watchpoint): Likewise.
	* nat/mips-linux-watch.c (mips_linux_watch_type_to_irw): Likewise.
	* nat/mips-linux-watch.h (struct mips_watchpoint): Likewise.
	(mips_linux_watch_type_to_irw): Likewise.
	* nto-procfs.c (procfs_can_use_hw_breakpoint): Likewise.
	(procfs_insert_hw_watchpoint): Likewise.
	(procfs_remove_hw_watchpoint): Likewise.
	(procfs_hw_watchpoint): Likewise.
	(procfs_can_use_hw_breakpoint): Likewise.
	(procfs_remove_hw_watchpoint): Likewise.
	(procfs_insert_hw_watchpoint): Likewise.
	* p-lang.c (pascal_op_print_tab): Likewise.
	* ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Likewise.
	* ppc-linux-tdep.c (ppu2spu_unwind_register): Likewise.
	* ppc-sysv-tdep.c (get_decimal_float_return_value): Likewise.
	* procfs.c (procfs_can_use_hw_breakpoint): Likewise.
	(procfs_insert_watchpoint): Likewise.
	(procfs_remove_watchpoint): Likewise.
	* psymtab.c (recursively_search_psymtabs): Likewise.
	* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Likewise.
	(m32r_insert_watchpoint): Likewise.
	* remote-mips.c (mips_can_use_watchpoint): Likewise.
	(mips_insert_watchpoint): Likewise.
	(mips_remove_watchpoint): Likewise.
	* remote.c (watchpoint_to_Z_packet): Likewise.
	(remote_insert_watchpoint): Likewise.
	(remote_remove_watchpoint): Likewise.
	(remote_check_watch_resources): Likewise.
	* s390-linux-nat.c (s390_insert_watchpoint): Likewise.
	(s390_remove_watchpoint): Likewise.
	(s390_can_use_hw_breakpoint): Likewise.
	* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
	* spu-linux-nat.c (spu_can_use_hw_breakpoint): Likewise.
	* target.h (struct target_ops): Likewise.
	* tilegx-tdep.c (tilegx_analyze_prologue): Likewise.
	* ui-out.c (struct ui_out_hdr): Likewise.
	(append_header_to_list): Likewise.
	(get_next_header): Likewise.
	(verify_field): Likewise.
	(ui_out_begin): Likewise.
	(ui_out_field_int): Likewise.
	(ui_out_field_fmt_int): Likewise.
	(ui_out_field_skip): Likewise.
	(ui_out_field_string): Likewise.
	(ui_out_field_fmt): Likewise.
	* varobj.c (new_variable): Likewise.
	* x86-nat.c (x86_insert_watchpoint): Likewise.
	(x86_remove_watchpoint): Likewise.
	(x86_can_use_hw_breakpoint): Likewise.
	* xtensa-tdep.h (struct gdbarch_tdep): Likewise.
	* inflow.c (enum gdb_has_a_terminal_flag_enum): Add name to
	previously anonymous enumeration type..
	* linux-record.h (enum gdb_syscall): Add gdb_sys_no_syscall
	value.
	* target-debug.h (target_debug_print_enum_target_hw_bp_type): New.
	(target_debug_print_enum_bptype): New.
	* target-delegates.c: Regenerate.
 2015-07-31 13:19:53 -04:00
Pedro Alves
fe978cb071 C++ keyword cleanliness, mostly auto-generated 
This patch renames symbols that happen to have names which are
reserved keywords in C++.

Most of this was generated with Tromey's cxx-conversion.el script.
Some places where later hand massaged a bit, to fix formatting, etc.
And this was rebased several times meanwhile, along with re-running
the script, so re-running the script from scratch probably does not
result in the exact same output.  I don't think that matters anyway.

gdb/
2015-02-27  Tom Tromey  <tromey@redhat.com>
	    Pedro Alves  <palves@redhat.com>

	Rename symbols whose names are reserved C++ keywords throughout.

gdb/gdbserver/
2015-02-27  Tom Tromey  <tromey@redhat.com>
	    Pedro Alves  <palves@redhat.com>

	Rename symbols whose names are reserved C++ keywords throughout.
 2015-02-27 16:33:07 +00:00
Joel Brobecker
32d0add0a6 Update year range in copyright notice of all files owned by the GDB project. 
gdb/ChangeLog:

        Update year range in copyright notice of all files.
 2015-01-01 13:32:14 +04:00
Pedro Alves
e8032dde10 Push pruning old threads down to the target 
When GDB wants to sync the thread list with the target's (e.g., due to
"info threads"), it calls update_thread_list:

 update_thread_list (void)
 {
   prune_threads ();
   target_find_new_threads ();
   update_threads_executing ();
 }

And then prune_threads does:

 prune_threads (void)
 {
   struct thread_info *tp, *next;

   for (tp = thread_list; tp; tp = next)
     {
       next = tp->next;
       if (!thread_alive (tp))
	 delete_thread (tp->ptid);
     }
 }

Calling thread_live on each thread one by one is expensive.

E.g., on Linux, it ends up doing kill(SIG0) once for each thread.  Not
a big deal, but still a bunch of syscalls...

With the remote target, it's cumbersome.  That thread_alive call ends
up generating one T packet per thread:

 Sending packet: $Tp2141.2150#82...Packet received: OK
 Sending packet: $Tp2141.214f#b7...Packet received: OK
 Sending packet: $Tp2141.2141#82...Packet received: OK
 Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n

That seems a bit silly when target_find_new_threads method
implementations will always fetch the whole current set of target
threads, and then add those that are not in GDB's thread list, to
GDB's thread list.

This patch thus pushes down the responsibility of pruning dead threads
to the target_find_new_threads method instead, so a target may
implement pruning dead threads however it wants.

Once we do that, target_find_new_threads becomes a misnomer, so the
patch renames it to target_update_thread_list.

The patch doesn't attempt to do any optimization to any target yet.
It simply exports prune_threads, and makes all implementations of
target_update_thread_list call that.  It's meant to be a no-op.

gdb/
2014-10-15  Pedro Alves  <palves@redhat.com>

	* ada-tasks.c (print_ada_task_info, task_command_1): Adjust.
	* bsd-uthread.c (bsd_uthread_find_new_threads): Rename to ...
	(bsd_uthread_update_thread_list): ... this.  Call prune_threads.
	(bsd_uthread_target): Adjust.
	* corelow.c (core_open): Adjust.
	* dec-thread.c (dec_thread_find_new_threads): Update comment.
	(dec_thread_update_thread_list): New function.
	(init_dec_thread_ops): Adjust.
	* gdbthread.h (prune_threads): New declaration.
	* linux-thread-db.c (thread_db_find_new_threads): Rename to ...
	(thread_db_update_thread_list): ... this.  Call prune_threads.
	(init_thread_db_ops): Adjust.
	* nto-procfs.c (procfs_find_new_threads): Rename to ...
	(procfs_update_thread_list): ... this.  Call prune_threads.
	(procfs_attach, procfs_create_inferior, init_procfs_targets):
	Adjust.
	* obsd-nat.c (obsd_find_new_threads): Rename to ...
	(obsd_update_thread_list): ... this.  Call prune_threads.
	(obsd_add_target): Adjust.
	* procfs.c (procfs_target): Adjust.
	(procfs_notice_thread): Update comment.
	(procfs_find_new_threads): Rename to ...
	(procfs_update_thread_list): ... this.  Call prune_threads.
	* ravenscar-thread.c (ravenscar_update_inferior_ptid): Update
	comment.
	(ravenscar_wait): Adjust.
	(ravenscar_find_new_threads): Rename to ...
	(ravenscar_update_thread_list): ... this.  Call prune_threads.
	(init_ravenscar_thread_ops): Adjust.
	* record-btrace.c (record_btrace_find_new_threads): Rename to ...
	(record_btrace_update_thread_list): ... this.  Adjust comment.
	(init_record_btrace_ops): Adjust.
	* remote.c (remote_threads_info): Rename to ...
	(remote_update_thread_list): ... this.  Call prune_threads.
	(remote_start_remote, extended_remote_attach_1, init_remote_ops):
	Adjust.
	* sol-thread.c (check_for_thread_db): Adjust.
	(sol_find_new_threads_callback): Rename to ...
	(sol_update_thread_list_callback): ... this.
	(sol_find_new_threads): Rename to ...
	(sol_update_thread_list): ... this.  Call prune_threads.  Adjust.
	(sol_get_ada_task_ptid, init_sol_thread_ops): Adjust.
	* target-delegates.c: Regenerate.
	* target.c (target_find_new_threads): Rename to ...
	(target_update_thread_list): ... this.
	* target.h (struct target_ops): Rename to_find_new_threads field
	to to_update_thread_list.
	(target_find_new_threads): Rename to ...
	(target_update_thread_list): ... this.
	* thread.c (prune_threads): Make extern.
	(update_thread_list): Adjust.
 2014-10-15 22:54:13 +01:00
Gary Benson
c765fdb902 Remove spurious exceptions.h inclusions 
defs.h includes utils.h, and utils.h includes exceptions.h.  All GDB
.c files include defs.h as their first line, so no file other than
utils.h needs to include exceptions.h.  This commit removes all such
inclusions.

gdb/ChangeLog:

	* ada-lang.c: Do not include exceptions.h.
	* ada-valprint.c: Likewise.
	* amd64-tdep.c: Likewise.
	* auto-load.c: Likewise.
	* block.c: Likewise.
	* break-catch-throw.c: Likewise.
	* breakpoint.c: Likewise.
	* btrace.c: Likewise.
	* c-lang.c: Likewise.
	* cli/cli-cmds.c: Likewise.
	* cli/cli-interp.c: Likewise.
	* cli/cli-script.c: Likewise.
	* completer.c: Likewise.
	* corefile.c: Likewise.
	* corelow.c: Likewise.
	* cp-abi.c: Likewise.
	* cp-support.c: Likewise.
	* cp-valprint.c: Likewise.
	* darwin-nat.c: Likewise.
	* dwarf2-frame-tailcall.c: Likewise.
	* dwarf2-frame.c: Likewise.
	* dwarf2loc.c: Likewise.
	* dwarf2read.c: Likewise.
	* eval.c: Likewise.
	* event-loop.c: Likewise.
	* event-top.c: Likewise.
	* f-valprint.c: Likewise.
	* frame-unwind.c: Likewise.
	* frame.c: Likewise.
	* gdbtypes.c: Likewise.
	* gnu-v2-abi.c: Likewise.
	* gnu-v3-abi.c: Likewise.
	* guile/scm-auto-load.c: Likewise.
	* guile/scm-breakpoint.c: Likewise.
	* guile/scm-cmd.c: Likewise.
	* guile/scm-frame.c: Likewise.
	* guile/scm-lazy-string.c: Likewise.
	* guile/scm-param.c: Likewise.
	* guile/scm-symbol.c: Likewise.
	* guile/scm-type.c: Likewise.
	* hppa-hpux-tdep.c: Likewise.
	* i386-tdep.c: Likewise.
	* inf-loop.c: Likewise.
	* infcall.c: Likewise.
	* infcmd.c: Likewise.
	* infrun.c: Likewise.
	* interps.c: Likewise.
	* interps.h: Likewise.
	* jit.c: Likewise.
	* linespec.c: Likewise.
	* linux-nat.c: Likewise.
	* linux-thread-db.c: Likewise.
	* m32r-rom.c: Likewise.
	* main.c: Likewise.
	* memory-map.c: Likewise.
	* mi/mi-cmd-break.c: Likewise.
	* mi/mi-cmd-stack.c: Likewise.
	* mi/mi-interp.c: Likewise.
	* mi/mi-main.c: Likewise.
	* monitor.c: Likewise.
	* nto-procfs.c: Likewise.
	* objc-lang.c: Likewise.
	* p-valprint.c: Likewise.
	* parse.c: Likewise.
	* ppc-linux-tdep.c: Likewise.
	* printcmd.c: Likewise.
	* probe.c: Likewise.
	* python/py-auto-load.c: Likewise.
	* python/py-breakpoint.c: Likewise.
	* python/py-cmd.c: Likewise.
	* python/py-finishbreakpoint.c: Likewise.
	* python/py-frame.c: Likewise.
	* python/py-framefilter.c: Likewise.
	* python/py-function.c: Likewise.
	* python/py-gdb-readline.c: Likewise.
	* python/py-inferior.c: Likewise.
	* python/py-infthread.c: Likewise.
	* python/py-lazy-string.c: Likewise.
	* python/py-linetable.c: Likewise.
	* python/py-param.c: Likewise.
	* python/py-prettyprint.c: Likewise.
	* python/py-symbol.c: Likewise.
	* python/py-type.c: Likewise.
	* python/py-value.c: Likewise.
	* python/python-internal.h: Likewise.
	* python/python.c: Likewise.
	* record-btrace.c: Likewise.
	* record-full.c: Likewise.
	* regcache.c: Likewise.
	* remote-fileio.c: Likewise.
	* remote-mips.c: Likewise.
	* remote.c: Likewise.
	* rs6000-aix-tdep.c: Likewise.
	* rs6000-nat.c: Likewise.
	* skip.c: Likewise.
	* solib-darwin.c: Likewise.
	* solib-dsbt.c: Likewise.
	* solib-frv.c: Likewise.
	* solib-ia64-hpux.c: Likewise.
	* solib-spu.c: Likewise.
	* solib-svr4.c: Likewise.
	* solib.c: Likewise.
	* spu-tdep.c: Likewise.
	* stack.c: Likewise.
	* stap-probe.c: Likewise.
	* symfile-mem.c: Likewise.
	* symmisc.c: Likewise.
	* target.c: Likewise.
	* thread.c: Likewise.
	* top.c: Likewise.
	* tracepoint.c: Likewise.
	* tui/tui-interp.c: Likewise.
	* typeprint.c: Likewise.
	* utils.c: Likewise.
	* valarith.c: Likewise.
	* valops.c: Likewise.
	* valprint.c: Likewise.
	* value.c: Likewise.
	* varobj.c: Likewise.
	* windows-nat.c: Likewise.
	* xml-support.c: Likewise.
 2014-10-08 09:33:22 +01:00
Maciej W. Rozycki
0d5ed15352 Avoid software breakpoint's instruction shadow inconsistency 
This change:

commit b775012e84
Author: Luis Machado <luisgpm@br.ibm.com>
Date:   Fri Feb 24 15:10:59 2012 +0000

    2012-02-24  Luis Machado  <lgustavo@codesourcery.com>

	* remote.c (remote_supports_cond_breakpoints): New forward
	declaration.
[...]

changed the way breakpoints are inserted and removed such that
`insert_bp_location' can now be called with the breakpoint being handled
already in place, while previously the call was only ever made for
breakpoints that have not been put in place.  This in turn caused an
issue for software breakpoints and targets for which a breakpoint's
`placed_address' may not be the same as the original requested address.

The issue is `insert_bp_location' overwrites the previously adjusted
value in `placed_address' with the original address, that is only
replaced back with the correct adjusted address later on when
`gdbarch_breakpoint_from_pc' is called.  Meanwhile there's a window
where the value in `placed_address' does not correspond to data stored
in `shadow_contents', leading to incorrect instruction bytes being
supplied when `one_breakpoint_xfer_memory' is called to supply the
instruction overlaid by the breakpoint.

And this is exactly what happens on the MIPS target with software
breakpoints placed in microMIPS code.  In this case not only
`placed_address' is not the original address because of the ISA bit, but
`mips_breakpoint_from_pc' has to read the original instruction to
determine which one of the two software breakpoint instruction encodings
to choose as well.  The 16-bit encoding is used to replace 16-bit
instructions and similarly the 32-bit one is used with 32-bit
instructions, to satisfy branch delay slot size requirements.

The mismatch between `placed_address' and the address data in
`shadow_contents' has been obtained from leads to the wrong encoding
being used in some cases, which in the case of a 32-bit software
breakpoint instruction replacing a 16-bit instruction causes corruption
to the adjacent following instruction and leads the debug session astray
if execution reaches there e.g. with a jump.

To address this problem I made the change below, that adds a
`reqstd_address' field to `struct bp_target_info' and leaves
`placed_address' unchanged once it has been set.  This ensures data in
`shadow_contents' is always consistent with `placed_address'.

This approach also has this good side effect that all the places that
examine the breakpoint's address see a consistent value, either
`reqstd_address' or `placed_address', as required.  Currently some
places see either the original or the adjusted address in
`placed_address', depending on whether they have been called before
`gdbarch_remote_breakpoint_from_pc' or afterwards.  This is in
particular true for subsequent calls to
`gdbarch_remote_breakpoint_from_pc' itself, e.g. from
`one_breakpoint_xfer_memory'.  This is also important for places like
`find_single_step_breakpoint' where a breakpoint's address is compared
to the raw value of $pc.

	* breakpoint.h (bp_target_info): Add `reqstd_address' member,
	update comments.
	* breakpoint.c (one_breakpoint_xfer_memory): Use `reqstd_address'
	for the breakpoint's address.  Don't preinitialize `placed_size'.
	(insert_bp_location): Set `reqstd_address' rather than
	`placed_address'.
	(bp_target_info_copy_insertion_state): Also copy `placed_address'.
	(bkpt_insert_location): Use `reqstd_address' for the breakpoint's
	address.
	(bkpt_remove_location): Likewise.
	(deprecated_insert_raw_breakpoint): Likewise.
	(deprecated_remove_raw_breakpoint): Likewise.
	(find_single_step_breakpoint): Likewise.
	* mem-break.c (default_memory_insert_breakpoint): Use
	`reqstd_address' for the breakpoint's address.  Don't set
	`placed_address' or `placed_size' if breakpoint contents couldn't
	have been determined.
	* remote.c (remote_insert_breakpoint): Use `reqstd_address' for
	the breakpoint's address.
	(remote_insert_hw_breakpoint): Likewise.  Don't set
	`placed_address' or `placed_size' if breakpoint couldn't have been
	set.
	* aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Use
	`reqstd_address' for the breakpoint's address.
	* arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Likewise.
	* ia64-tdep.c (ia64_memory_insert_breakpoint): Likewise.
	* m32r-tdep.c (m32r_memory_insert_breakpoint): Likewise.
	* microblaze-linux-tdep.c
	(microblaze_linux_memory_remove_breakpoint): Likewise.
	* monitor.c (monitor_insert_breakpoint): Likewise.
	* nto-procfs.c (procfs_insert_breakpoint): Likewise.
	(procfs_insert_hw_breakpoint): Likewise.
	* ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Likewise.
	* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
	* remote-m32r-sdi.c (m32r_insert_breakpoint): Likewise.
	* remote-mips.c (mips_insert_breakpoint): Likewise.
	* x86-nat.c (x86_insert_hw_breakpoint): Likewise.
 2014-10-03 12:54:34 +01:00
Gary Benson
6d3d12ebef Include string.h in common-defs.h 
This commit includes string.h in common-defs.h and removes all other
inclusions.

gdb/
2014-08-07  Gary Benson  <gbenson@redhat.com>

	* common/common-defs.h: Include string.h.
	* aarch64-tdep.c: Do not include string.h.
	* ada-exp.y: Likewise.
	* ada-lang.c: Likewise.
	* ada-lex.l: Likewise.
	* ada-typeprint.c: Likewise.
	* ada-valprint.c: Likewise.
	* aix-thread.c: Likewise.
	* alpha-linux-tdep.c: Likewise.
	* alpha-mdebug-tdep.c: Likewise.
	* alpha-nat.c: Likewise.
	* alpha-osf1-tdep.c: Likewise.
	* alpha-tdep.c: Likewise.
	* alphanbsd-tdep.c: Likewise.
	* amd64-dicos-tdep.c: Likewise.
	* amd64-linux-tdep.c: Likewise.
	* amd64-nat.c: Likewise.
	* amd64-sol2-tdep.c: Likewise.
	* amd64fbsd-tdep.c: Likewise.
	* amd64obsd-tdep.c: Likewise.
	* arch-utils.c: Likewise.
	* arm-linux-nat.c: Likewise.
	* arm-linux-tdep.c: Likewise.
	* arm-tdep.c: Likewise.
	* arm-wince-tdep.c: Likewise.
	* armbsd-tdep.c: Likewise.
	* armnbsd-nat.c: Likewise.
	* armnbsd-tdep.c: Likewise.
	* armobsd-tdep.c: Likewise.
	* avr-tdep.c: Likewise.
	* ax-gdb.c: Likewise.
	* ax-general.c: Likewise.
	* bcache.c: Likewise.
	* bfin-tdep.c: Likewise.
	* breakpoint.c: Likewise.
	* build-id.c: Likewise.
	* buildsym.c: Likewise.
	* c-exp.y: Likewise.
	* c-lang.c: Likewise.
	* c-typeprint.c: Likewise.
	* c-valprint.c: Likewise.
	* charset.c: Likewise.
	* cli-out.c: Likewise.
	* cli/cli-cmds.c: Likewise.
	* cli/cli-decode.c: Likewise.
	* cli/cli-dump.c: Likewise.
	* cli/cli-interp.c: Likewise.
	* cli/cli-logging.c: Likewise.
	* cli/cli-script.c: Likewise.
	* cli/cli-setshow.c: Likewise.
	* cli/cli-utils.c: Likewise.
	* coffread.c: Likewise.
	* common/agent.c: Likewise.
	* common/buffer.c: Likewise.
	* common/buffer.h: Likewise.
	* common/common-utils.c: Likewise.
	* common/filestuff.c: Likewise.
	* common/filestuff.c: Likewise.
	* common/format.c: Likewise.
	* common/print-utils.c: Likewise.
	* common/rsp-low.c: Likewise.
	* common/signals.c: Likewise.
	* common/vec.h: Likewise.
	* common/xml-utils.c: Likewise.
	* core-regset.c: Likewise.
	* corefile.c: Likewise.
	* corelow.c: Likewise.
	* cp-abi.c: Likewise.
	* cp-name-parser.y: Likewise.
	* cp-support.c: Likewise.
	* cp-valprint.c: Likewise.
	* cris-tdep.c: Likewise.
	* d-exp.y: Likewise.
	* darwin-nat.c: Likewise.
	* dbxread.c: Likewise.
	* dcache.c: Likewise.
	* demangle.c: Likewise.
	* dicos-tdep.c: Likewise.
	* disasm.c: Likewise.
	* doublest.c: Likewise.
	* dsrec.c: Likewise.
	* dummy-frame.c: Likewise.
	* dwarf2-frame.c: Likewise.
	* dwarf2loc.c: Likewise.
	* dwarf2read.c: Likewise.
	* elfread.c: Likewise.
	* environ.c: Likewise.
	* eval.c: Likewise.
	* event-loop.c: Likewise.
	* exceptions.c: Likewise.
	* exec.c: Likewise.
	* expprint.c: Likewise.
	* f-exp.y: Likewise.
	* f-lang.c: Likewise.
	* f-typeprint.c: Likewise.
	* f-valprint.c: Likewise.
	* fbsd-nat.c: Likewise.
	* findcmd.c: Likewise.
	* findvar.c: Likewise.
	* fork-child.c: Likewise.
	* frame.c: Likewise.
	* frv-linux-tdep.c: Likewise.
	* frv-tdep.c: Likewise.
	* gdb.c: Likewise.
	* gdb_bfd.c: Likewise.
	* gdbarch.c: Likewise.
	* gdbarch.sh: Likewise.
	* gdbtypes.c: Likewise.
	* gnu-nat.c: Likewise.
	* gnu-v2-abi.c: Likewise.
	* gnu-v3-abi.c: Likewise.
	* go-exp.y: Likewise.
	* go-lang.c: Likewise.
	* go32-nat.c: Likewise.
	* guile/guile.c: Likewise.
	* guile/scm-auto-load.c: Likewise.
	* hppa-hpux-tdep.c: Likewise.
	* hppa-linux-nat.c: Likewise.
	* hppanbsd-tdep.c: Likewise.
	* hppaobsd-tdep.c: Likewise.
	* i386-cygwin-tdep.c: Likewise.
	* i386-dicos-tdep.c: Likewise.
	* i386-linux-tdep.c: Likewise.
	* i386-nto-tdep.c: Likewise.
	* i386-sol2-tdep.c: Likewise.
	* i386-tdep.c: Likewise.
	* i386bsd-tdep.c: Likewise.
	* i386gnu-nat.c: Likewise.
	* i386nbsd-tdep.c: Likewise.
	* i386obsd-tdep.c: Likewise.
	* i387-tdep.c: Likewise.
	* ia64-libunwind-tdep.c: Likewise.
	* ia64-linux-nat.c: Likewise.
	* inf-child.c: Likewise.
	* inf-ptrace.c: Likewise.
	* inf-ttrace.c: Likewise.
	* infcall.c: Likewise.
	* infcmd.c: Likewise.
	* inflow.c: Likewise.
	* infrun.c: Likewise.
	* interps.c: Likewise.
	* iq2000-tdep.c: Likewise.
	* irix5-nat.c: Likewise.
	* jv-exp.y: Likewise.
	* jv-lang.c: Likewise.
	* jv-typeprint.c: Likewise.
	* jv-valprint.c: Likewise.
	* language.c: Likewise.
	* linux-fork.c: Likewise.
	* linux-nat.c: Likewise.
	* lm32-tdep.c: Likewise.
	* m2-exp.y: Likewise.
	* m2-typeprint.c: Likewise.
	* m32c-tdep.c: Likewise.
	* m32r-linux-nat.c: Likewise.
	* m32r-linux-tdep.c: Likewise.
	* m32r-rom.c: Likewise.
	* m32r-tdep.c: Likewise.
	* m68hc11-tdep.c: Likewise.
	* m68k-tdep.c: Likewise.
	* m68kbsd-tdep.c: Likewise.
	* m68klinux-nat.c: Likewise.
	* m68klinux-tdep.c: Likewise.
	* m88k-tdep.c: Likewise.
	* machoread.c: Likewise.
	* macrocmd.c: Likewise.
	* main.c: Likewise.
	* mdebugread.c: Likewise.
	* mem-break.c: Likewise.
	* memattr.c: Likewise.
	* memory-map.c: Likewise.
	* mep-tdep.c: Likewise.
	* mi/mi-cmd-break.c: Likewise.
	* mi/mi-cmd-disas.c: Likewise.
	* mi/mi-cmd-env.c: Likewise.
	* mi/mi-cmd-stack.c: Likewise.
	* mi/mi-cmd-var.c: Likewise.
	* mi/mi-cmds.c: Likewise.
	* mi/mi-console.c: Likewise.
	* mi/mi-getopt.c: Likewise.
	* mi/mi-interp.c: Likewise.
	* mi/mi-main.c: Likewise.
	* mi/mi-parse.c: Likewise.
	* microblaze-rom.c: Likewise.
	* microblaze-tdep.c: Likewise.
	* mingw-hdep.c: Likewise.
	* minidebug.c: Likewise.
	* minsyms.c: Likewise.
	* mips-irix-tdep.c: Likewise.
	* mips-linux-tdep.c: Likewise.
	* mips-tdep.c: Likewise.
	* mips64obsd-tdep.c: Likewise.
	* mipsnbsd-tdep.c: Likewise.
	* mipsread.c: Likewise.
	* mn10300-linux-tdep.c: Likewise.
	* mn10300-tdep.c: Likewise.
	* monitor.c: Likewise.
	* moxie-tdep.c: Likewise.
	* mt-tdep.c: Likewise.
	* nat/linux-btrace.c: Likewise.
	* nat/linux-osdata.c: Likewise.
	* nat/linux-procfs.c: Likewise.
	* nat/linux-ptrace.c: Likewise.
	* nat/linux-waitpid.c: Likewise.
	* nbsd-tdep.c: Likewise.
	* nios2-linux-tdep.c: Likewise.
	* nto-procfs.c: Likewise.
	* nto-tdep.c: Likewise.
	* objc-lang.c: Likewise.
	* objfiles.c: Likewise.
	* opencl-lang.c: Likewise.
	* osabi.c: Likewise.
	* osdata.c: Likewise.
	* p-exp.y: Likewise.
	* p-lang.c: Likewise.
	* p-typeprint.c: Likewise.
	* parse.c: Likewise.
	* posix-hdep.c: Likewise.
	* ppc-linux-nat.c: Likewise.
	* ppc-sysv-tdep.c: Likewise.
	* ppcfbsd-tdep.c: Likewise.
	* ppcnbsd-tdep.c: Likewise.
	* ppcobsd-tdep.c: Likewise.
	* printcmd.c: Likewise.
	* procfs.c: Likewise.
	* prologue-value.c: Likewise.
	* python/py-auto-load.c: Likewise.
	* python/py-gdb-readline.c: Likewise.
	* ravenscar-thread.c: Likewise.
	* regcache.c: Likewise.
	* registry.c: Likewise.
	* remote-fileio.c: Likewise.
	* remote-m32r-sdi.c: Likewise.
	* remote-mips.c: Likewise.
	* remote-notif.c: Likewise.
	* remote-sim.c: Likewise.
	* remote.c: Likewise.
	* reverse.c: Likewise.
	* rs6000-aix-tdep.c: Likewise.
	* ser-base.c: Likewise.
	* ser-go32.c: Likewise.
	* ser-mingw.c: Likewise.
	* ser-pipe.c: Likewise.
	* ser-tcp.c: Likewise.
	* ser-unix.c: Likewise.
	* serial.c: Likewise.
	* sh-tdep.c: Likewise.
	* sh64-tdep.c: Likewise.
	* shnbsd-tdep.c: Likewise.
	* skip.c: Likewise.
	* sol-thread.c: Likewise.
	* solib-dsbt.c: Likewise.
	* solib-frv.c: Likewise.
	* solib-osf.c: Likewise.
	* solib-som.c: Likewise.
	* solib-spu.c: Likewise.
	* solib-target.c: Likewise.
	* solib.c: Likewise.
	* somread.c: Likewise.
	* source.c: Likewise.
	* sparc-nat.c: Likewise.
	* sparc-sol2-tdep.c: Likewise.
	* sparc-tdep.c: Likewise.
	* sparc64-tdep.c: Likewise.
	* sparc64fbsd-tdep.c: Likewise.
	* sparc64nbsd-tdep.c: Likewise.
	* sparcnbsd-tdep.c: Likewise.
	* spu-linux-nat.c: Likewise.
	* spu-multiarch.c: Likewise.
	* spu-tdep.c: Likewise.
	* stabsread.c: Likewise.
	* stack.c: Likewise.
	* std-regs.c: Likewise.
	* symfile.c: Likewise.
	* symmisc.c: Likewise.
	* symtab.c: Likewise.
	* target.c: Likewise.
	* thread.c: Likewise.
	* tilegx-linux-nat.c: Likewise.
	* tilegx-tdep.c: Likewise.
	* top.c: Likewise.
	* tracepoint.c: Likewise.
	* tui/tui-command.c: Likewise.
	* tui/tui-data.c: Likewise.
	* tui/tui-disasm.c: Likewise.
	* tui/tui-file.c: Likewise.
	* tui/tui-layout.c: Likewise.
	* tui/tui-out.c: Likewise.
	* tui/tui-regs.c: Likewise.
	* tui/tui-source.c: Likewise.
	* tui/tui-stack.c: Likewise.
	* tui/tui-win.c: Likewise.
	* tui/tui-windata.c: Likewise.
	* tui/tui-winsource.c: Likewise.
	* typeprint.c: Likewise.
	* ui-file.c: Likewise.
	* ui-out.c: Likewise.
	* user-regs.c: Likewise.
	* utils.c: Likewise.
	* v850-tdep.c: Likewise.
	* valarith.c: Likewise.
	* valops.c: Likewise.
	* valprint.c: Likewise.
	* value.c: Likewise.
	* varobj.c: Likewise.
	* vax-tdep.c: Likewise.
	* vaxnbsd-tdep.c: Likewise.
	* vaxobsd-tdep.c: Likewise.
	* windows-nat.c: Likewise.
	* xcoffread.c: Likewise.
	* xml-support.c: Likewise.
	* xstormy16-tdep.c: Likewise.
	* xtensa-linux-nat.c: Likewise.

gdb/gdbserver/
2014-08-07  Gary Benson  <gbenson@redhat.com>

	* server.h: Do not include string.h.
	* event-loop.c: Likewise.
	* linux-low.c: Likewise.
	* regcache.c: Likewise.
	* remote-utils.c: Likewise.
	* spu-low.c: Likewise.
	* utils.c: Likewise.
 2014-08-07 09:06:47 +01:00
Tom Tromey
014f9477f4 constify to_open 
This makes target_ops::to_open take a const string and then fixes the
fallout.

There were a few of these I could not build.  However I eyeballed it
and in any case the fixes should generally be trivial.

This is based on the patch to fix up the target debugging for to_open,
because that changes gdb to not directly install to_open as the target
command

2014-07-30  Tom Tromey  <tromey@redhat.com>

	* bsd-kvm.c (bsd_kvm_open): Constify.
	* corelow.c (core_open): Constify.
	* ctf.c (ctf_open): Constify.
	* dbug-rom.c (dbug_open): Constify.
	* exec.c (exec_open): Constify.
	* m32r-rom.c (m32r_open, mon2000_open): Constify.
	* microblaze-rom.c (picobug_open): Constify.
	* nto-procfs.c (procfs_open_1, procfs_open, procfs_native_open):
	Constify.
	* ppcbug-rom.c (ppcbug_open0, ppcbug_open1): Constify.
	* record-btrace.c (record_btrace_open): Constify.
	* record-full.c (record_full_core_open_1, record_full_open_1)
	(record_full_open): Constify.
	* remote-m32r-sdi.c (m32r_open): Constify.
	* remote-mips.c (common_open, mips_open, pmon_open, ddb_open)
	(rockhopper_open, lsi_open): Constify.
	* remote-sim.c (gdbsim_open): Constify.
	* remote.c (remote_open, extended_remote_open, remote_open_1):
	Constify.
	* target.h (struct target_ops) <to_open>: Make "arg" const.
	* tracefile-tfile.c (tfile_open): Constify.
 2014-07-30 08:02:53 -06:00
Tom Tromey
c0939df1ce constify to_attach 
This constifies the "args" argument to the target_ops to_attach
method.

I updated all instances of the method.  I could not compile all of
them but I hand-inspected them.  In all cases either the argument is
ignored, or it is passed to parse_pid_to_attach.  (linux-nat does some
extra stuff, but that one I built...)

If you want to try it on your host of choice, please do so.

The code in parse_pid_to_attach seems a little bogus to me.  If there
is a platform with a broken strtoul, we have better methods for fixing
the issue now.  However, I left the code as is since it is clearly ok
to do so.

Built and regtested on x86-64 Fedora 20.

2014-06-04  Tom Tromey  <tromey@redhat.com>

	* procfs.c (procfs_attach): Make "args" const.
	* windows-nat.c (windows_attach): Make "args" const.
	* nto-procfs.c (procfs_attach): Make "args" const.
	* inf-ttrace.c (inf_ttrace_attach): Make "args" const.
	* go32-nat.c (go32_attach): Make "args" const.
	* gnu-nat.c (gnu_attach): Make "args" const.
	* darwin-nat.c (darwin_attach): Make "args" const.
	* inf-ptrace.c (inf_ptrace_attach): Make "args" const.
	* linux-nat.c (linux_nat_attach): Make "args" const.
	* remote.c (extended_remote_attach_1, extended_remote_attach):
	Make "args" const.
	* target.h (struct target_ops) <to_attach>: Make "args" const.
	(find_default_attach): Likewise.
	* utils.c (parse_pid_to_attach): Make "args" const.
	* utils.h (parse_pid_to_attach): Update.
 2014-06-04 11:11:43 -06:00
Pedro Alves
c1ee2fb3cb Native targets: Add inf-child.c:inf_child_mourn_inferior and use it. 
Most ports do the same thing in the tail of their mourn routine - call
generic_mourn_inferior+inf_child_maybe_unpush_target.

This factors that out to a convenience function.  More could be done,
but this converts only the really obvious ones.

Tested by building GDB on x86_64 Fedora 20, mingw32 and djgpp.  The
rest is untested, but I think a patch can't get more obvious.

gdb/
2014-05-21  Pedro Alves  <palves@redhat.com>

	* inf-child.c (inf_child_mourn_inferior): New function.
	* inf-child.h (inf_child_mourn_inferior): New declaration.
	* darwin-nat.c (darwin_mourn_inferior): Use
	inf_child_mourn_inferior.
	* gnu-nat.c (gnu_mourn_inferior): Likewise.
	* inf-ptrace.c (inf_ptrace_mourn_inferior): Likewise.
	* inf-ttrace.c (inf_ttrace_mourn_inferior): Likewise.
	* nto-procfs.c (procfs_mourn_inferior): Likewise.
	* windows-nat.c (windows_mourn_inferior): Likewise.
 2014-05-21 22:28:23 +01:00
Pedro Alves
6a3cb8e88a Allow making GDB not automatically connect to the native target. 
Sometimes it's useful to be able to disable the automatic connection
to the native target.  E.g., sometimes GDB disconnects from the
extended-remote target I was debugging, without me noticing it, and
then I do "run".  That starts the program locally, and only after a
little head scratch session do I figure out the program is running
locally instead of remotely as intended.  Same thing with "attach",
"info os", etc.

With the patch, we now can have this instead:

 (gdb) set auto-connect-native-target off
 (gdb) target extended-remote :9999
 ...
 *gdb disconnects*
 (gdb) run
 Don't know how to run.  Try "help target".

To still be able to connect to the native target with
auto-connect-native-target set to off, I've made "target native" work
instead of erroring out as today.

Before:

 (gdb) target native
 Use the "run" command to start a native process.

After:

 (gdb) target native
 Done.  Use the "run" command to start a process.
 (gdb) maint print target-stack
 The current target stack is:
   - native (Native process)
   - exec (Local exec file)
   - None (None)
 (gdb) run
 Starting program: ./a.out
 ...

I've also wanted this for the testsuite, when running against the
native-extended-gdbserver.exp board (runs against gdbserver in
extended-remote mode).  With a non-native-target board, it's always a
bug to launch a program with the native target.  Turns out we still
have one such case this patch catches:

 (gdb) break main
 Breakpoint 1 at 0x4009e5: file ../../../src/gdb/testsuite/gdb.base/coremaker.c, line 138.
 (gdb) run
 Don't know how to run.  Try "help target".
 (gdb) FAIL: gdb.base/corefile.exp: run: with core

On the patch itself, probably the least obvious bit is the need to go
through all targets, and move the unpush_target call to after the
generic_mourn_inferior call instead of before.  This is what
inf-ptrace.c does too, ever since multi-process support was added.
The reason inf-ptrace.c does things in that order is that in the
current multi-process/single-target model, we shouldn't unpush the
target if there are still other live inferiors being debugged.  The
check for that is "have_inferiors ()" (a misnomer nowadays...), which
does:

 have_inferiors (void)
 {
   for (inf = inferior_list; inf; inf = inf->next)
     if (inf->pid != 0)
       return 1;

It's generic_mourn_inferior that ends up clearing inf->pid, so we need
to call it before the have_inferiors check.  To make all native
targets behave the same WRT to explicit "target native", I've added an
inf_child_maybe_unpush_target function that targets call instead of
calling unpush_target directly, and as that includes the
have_inferiors check, I needed to adjust the targets.

Tested on x86_64 Fedora 20, native, and also with the
extended-gdbserver board.

Confirmed a cross build of djgpp gdb still builds.

Smoke tested a cross build of Windows gdb under Wine.

Untested otherwise.

gdb/
2014-05-21  Pedro Alves  <palves@redhat.com>

	* inf-child.c (inf_child_ops, inf_child_explicitly_opened): New
	globals.
	(inf_child_open_target): New function.
	(inf_child_open): Use inf_child_open_target to push the target
	instead of erroring out.
	(inf_child_disconnect, inf_child_close)
	(inf_child_maybe_unpush_target): New functions.
	(inf_child_target): Install inf_child_disconnect and
	inf_child_close.  Store a pointer to the returned object.
	* inf-child.h (inf_child_open_target, inf_child_maybe_unpush): New
	declarations.
	* target.c (auto_connect_native_target): New global.
	(show_default_run_target): New function.
	(find_default_run_target): Return NULL if automatically connecting
	to the native target is disabled.
	(_initialize_target): Install set/show auto-connect-native-target.
	* NEWS: Mention "set auto-connect-native-target", and "target
	native".
	* linux-nat.c (super_close): New global.
	(linux_nat_close): Call super_close.
	(linux_nat_add_target): Store a pointer to the base class's
	to_close method.
	* inf-ptrace.c (inf_ptrace_mourn_inferior, inf_ptrace_detach): Use
	inf_child_maybe_unpush.
	* inf-ttrace.c (inf_ttrace_him): Don't push the target if it is
	already pushed.
	(inf_ttrace_mourn_inferior): Only unpush the target after mourning
	the inferior.  Use inf_child_maybe_unpush_target.
	(inf_ttrace_attach): Don't push the target if it is already
	pushed.
	(inf_ttrace_detach): Use inf_child_maybe_unpush_target.
	* darwin-nat.c (darwin_mourn_inferior): Only unpush the target
	after mourning the inferior.  Use inf_child_maybe_unpush_target.
	(darwin_attach_pid): Don't push the target if it is already
	pushed.
	* gnu-nat.c (gnu_mourn_inferior): Only unpush the target after
	mourning the inferior.  Use inf_child_maybe_unpush_target.
	(gnu_detach): Use inf_child_maybe_unpush_target.
	* go32-nat.c (go32_create_inferior): Don't push the target if it
	is already pushed.
	(go32_mourn_inferior): Use inf_child_maybe_unpush_target.
	* nto-procfs.c (procfs_is_nto_target): Adjust comment.
	(procfs_open): Rename to ...
	(procfs_open_1): ... this.  Add target_ops parameter.  Adjust
	comments.  Can target_preopen before changing node.  Call
	inf_child_open_target to push the target explicitly.
	(procfs_attach): Don't push the target if it is already pushed.
	(procfs_detach): Use inf_child_maybe_unpush_target.
	(procfs_create_inferior): Don't push the target if it is already
	pushed.
	(nto_native_ops): New global.
	(procfs_open): Reimplement.
	(procfs_native_open): New function.
	(init_procfs_targets): Install procfs_native_open as to_open of
	"target native".  Store a pointer to the "native" target in
	nto_native_ops.
	* procfs.c (procfs_attach): Don't push the target if it is already
	pushed.
	(procfs_detach): Use inf_child_maybe_unpush_target.
	(procfs_mourn_inferior): Only unpush the target after mourning the
	inferior.  Use inf_child_maybe_unpush_target.
	(procfs_init_inferior): Don't push the target if it is already
	pushed.
	* windows-nat.c (do_initial_windows_stuff): Don't push the target
	if it is already pushed.
	(windows_detach): Use inf_child_maybe_unpush_target.
	(windows_mourn_inferior): Only unpush the target after mourning
	the inferior.  Use inf_child_maybe_unpush_target.

gdb/doc/
2014-05-21  Pedro Alves  <palves@redhat.com>

	* gdb.texinfo (Starting): Document "set/show
	auto-connect-native-target".
	(Target Commands): Document "target native".

gdb/testsuite/
2014-05-21  Pedro Alves  <palves@redhat.com>

	* boards/gdbserver-base.exp (GDBFLAGS): Set to "set
	auto-connect-native-target off".
	* gdb.base/auto-connect-native-target.c: New file.
	* gdb.base/auto-connect-native-target.exp: New file.
 2014-05-21 18:30:47 +01:00
Pedro Alves
132f8e032c nto-procfs.c: Add "target native". 
This makes QNX/NTO end up with two targets.  It preserves "target
procfs <node>", and adds a "native" target to be like other native
ports.

Not tested.

gdb/
2014-05-21  Pedro Alves  <palves@redhat.com>

	* nto-procfs.c (procfs_can_run): New function.
	(nto_procfs_ops): New global.
	(init_procfs_targets): New, based on procfs_target.  Install
	"target native" in addition to "target procfs".
	(_initialize_procfs): Call init_procfs_targets instead of adding
	the target here.
 2014-05-21 18:30:45 +01:00
Pedro Alves
ee8e9165af Make the nto-procfs.c target inherit inf-child.c. 
So that all native targets inherit a single "superclass".

Target methods that are set to or do the same as inf-child.c's are
removed.

Not tested.

gdb/
2014-03-12  Pedro Alves  <palves@redhat.com>

	* nto-procfs.c: Include inf-child.h.
	(procfs_ops): Delete global.
	(procfs_can_run): Delete method.
	(procfs_detach, procfs_mourn_inferior): Unpush the passed in
	target pointer instead of referencing procfs_ops.
	(procfs_prepare_to_store): Delete.
	(init_procfs_ops): Delete function.
	(procfs_target): New function, based on init_procfs_ops, but
	inherit inf_child_target.
	(_initialize_procfs): Use procfs_target.
 2014-03-12 11:24:41 +00:00
Pedro Alves
9d46c4e5f5 nto-procfs.c: Don't install a deprecated_xfer_memory method 
This removes yet another instance of a deprecated_xfer_memory user.

Completely untested.

gdb/
2014-02-26  Pedro Alves  <palves@redhat.com>

	* nto-procfs.c (procfs_xfer_memory): Adjust interface as a
	to_xfer_partial helper.  Rewrite.
	(procfs_xfer_partial): New function.
	(init_procfs_ops): Don't install a deprecated_xfer_memory hook.
	Install a to_xfer_partial hook.
 2014-02-26 14:37:48 +00:00
Tom Tromey
8476dc92e4 fix buglet in nto-procfs.c 
I happened to notice that nto-procfs.c defines
procfs_remove_hw_breakpoint but never uses it.  This caused it not to
be updated by my target-method-updating script.  This patch fixes the
function and installs it properly.  I have no way to test this,
however.

2014-02-19  Tom Tromey  <tromey@redhat.com>

	* nto-procfs.c (procfs_remove_hw_breakpoint): Add 'self'
	argument.
	(init_procfs_ops): Correctly set to_remove_hw_breakpoint.
 2014-02-19 07:48:48 -07:00
Tom Tromey
1eab8a48bf Add target_ops argument to to_stop 
2014-02-19  Tom Tromey  <tromey@redhat.com>

	* windows-nat.c (windows_stop): Add 'self' argument.
	* target.h (struct target_ops) <to_stop>: Add argument.
	* target.c (target_stop): Add argument.
	(debug_to_stop): Add argument.
	(update_current_target): Update.
	* remote.c (remote_stop): Add 'self' argument.
	* remote-sim.c (gdbsim_stop): Add 'self' argument.
	(gdbsim_cntrl_c): Update.
	* remote-m32r-sdi.c (m32r_stop): Add 'self' argument.
	* procfs.c (procfs_stop): Add 'self' argument.
	* nto-procfs.c (procfs_stop): Add 'self' argument.
	* monitor.c (monitor_stop): Add 'self' argument.
	(monitor_open): Update.
	* linux-nat.c (linux_nat_stop): Add argument.
	* inf-ptrace.c (inf_ptrace_stop): Add 'self' argument.
	* gnu-nat.c (gnu_stop): Add 'self' argument.
	* darwin-nat.c (darwin_stop): Add 'self' argument.
 2014-02-19 07:45:55 -07:00
Tom Tromey
94bedb42a7 Add target_ops argument to to_pass_signals 
2014-02-19  Tom Tromey  <tromey@redhat.com>

	* target.h (struct target_ops) <to_pass_signals>: Add argument.
	* target.c (target_pass_signals): Add argument.
	* remote.c (remote_pass_signals): Add 'self' argument.
	(remote_start_remote): Update.
	* procfs.c (procfs_pass_signals): Add 'self' argument.
	* nto-procfs.c (procfs_pass_signals): Add 'self' argument.
	* linux-nat.c (linux_nat_pass_signals): Add 'self' argument.
	(linux_nat_create_inferior, linux_nat_attach): Update.
 2014-02-19 07:45:51 -07:00
Tom Tromey
da82bd6b65 Add target_ops argument to to_can_run 
2014-02-19  Tom Tromey  <tromey@redhat.com>

	* windows-nat.c (windows_can_run): Add 'self' argument.
	* target.h (struct target_ops) <to_can_run>: Add argument.
	(target_can_run): Add argument.
	* target.c (debug_to_can_run): Add argument.
	(update_current_target): Update.
	* nto-procfs.c (procfs_can_run): Add 'self' argument.
	* inf-child.c (inf_child_can_run): Add 'self' argument.
	* go32-nat.c (go32_can_run): Add 'self' argument.
 2014-02-19 07:45:50 -07:00
Tom Tromey
7bb99c5383 Add target_ops argument to to_insert_watchpoint 
2014-02-19  Tom Tromey  <tromey@redhat.com>

	* target.h (struct target_ops) <to_insert_watchpoint>: Add
	argument.
	(target_insert_watchpoint): Add argument.
	* target.c (debug_to_insert_watchpoint): Add argument.
	(update_current_target): Update.
	* s390-linux-nat.c (s390_insert_watchpoint): Add 'self' argument.
	* remote.c (remote_insert_watchpoint): Add 'self' argument.
	* remote-mips.c (mips_insert_watchpoint): Add 'self' argument.
	* remote-m32r-sdi.c (m32r_insert_watchpoint): Add 'self' argument.
	* procfs.c (procfs_insert_watchpoint): Add 'self' argument.
	* ppc-linux-nat.c (ppc_linux_insert_watchpoint): Add 'self'
	argument.
	* nto-procfs.c (procfs_insert_hw_watchpoint): Add 'self' argument.
	(procfs_insert_hw_watchpoint): Add 'self' argument.
	* mips-linux-nat.c (mips_linux_insert_watchpoint): Add 'self'
	argument.
	* inf-ttrace.c (inf_ttrace_insert_watchpoint): Add 'self'
	argument.
	* ia64-linux-nat.c (ia64_linux_insert_watchpoint): Add 'self'
	argument.
	* i386-nat.c (i386_insert_watchpoint): Add 'self' argument.
	* arm-linux-nat.c (arm_linux_insert_watchpoint): Add 'self'
	argument.
	* aarch64-linux-nat.c (aarch64_linux_insert_watchpoint): Add
	'self' argument.
 2014-02-19 07:45:34 -07:00
Tom Tromey
11b5219af5 Add target_ops argument to to_remove_watchpoint 
2014-02-19  Tom Tromey  <tromey@redhat.com>

	* target.h (struct target_ops) <to_remove_watchpoint>: Add
	argument.
	(target_remove_watchpoint): Add argument.
	* target.c (debug_to_remove_watchpoint): Add argument.
	(update_current_target): Update.
	* s390-linux-nat.c (s390_remove_watchpoint): Add 'self' argument.
	* remote.c (remote_remove_watchpoint): Add 'self' argument.
	* remote-mips.c (mips_remove_watchpoint): Add 'self' argument.
	* remote-m32r-sdi.c (m32r_remove_watchpoint): Add 'self' argument.
	* procfs.c (procfs_remove_watchpoint): Add 'self' argument.
	* ppc-linux-nat.c (ppc_linux_remove_watchpoint): Add 'self'
	argument.
	* nto-procfs.c (procfs_remove_hw_watchpoint): Add 'self' argument.
	* mips-linux-nat.c (mips_linux_remove_watchpoint): Add 'self'
	argument.
	* inf-ttrace.c (inf_ttrace_remove_watchpoint): Add 'self'
	argument.
	* ia64-linux-nat.c (ia64_linux_remove_watchpoint): Add 'self'
	argument.
	* i386-nat.c (i386_remove_watchpoint): Add 'self' argument.
	* arm-linux-nat.c (arm_linux_remove_watchpoint): Add 'self'
	argument.
	* aarch64-linux-nat.c (aarch64_linux_remove_watchpoint): Add
	'self' argument.
 2014-02-19 07:45:33 -07:00
Tom Tromey
23a267714b Add target_ops argument to to_insert_hw_breakpoint 
2014-02-19  Tom Tromey  <tromey@redhat.com>

	* target.h (struct target_ops) <to_insert_hw_breakpoint>: Add
	argument.
	(target_insert_hw_breakpoint): Add argument.
	* target.c (debug_to_insert_hw_breakpoint): Add argument.
	(update_current_target): Update.
	* remote.c (remote_insert_hw_breakpoint): Add 'self' argument.
	* ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Add 'self'
	argument.
	* nto-procfs.c (procfs_insert_hw_breakpoint): Add 'self' argument.
	* i386-nat.c (i386_insert_hw_breakpoint): Add 'self' argument.
	* arm-linux-nat.c (arm_linux_insert_hw_breakpoint): Add 'self'
	argument.
	* aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Add
	'self' argument.
 2014-02-19 07:45:31 -07:00
Tom Tromey
5461485a87 Add target_ops argument to to_can_use_hw_breakpoint 
2014-02-19  Tom Tromey  <tromey@redhat.com>

	* target.h (struct target_ops) <to_can_use_hw_breakpoint>: Add
	argument.
	(target_can_use_hardware_watchpoint): Add argument.
	* target.c (debug_to_can_use_hw_breakpoint): Add argument.
	(update_current_target): Update.
	* spu-linux-nat.c (spu_can_use_hw_breakpoint): Add 'self'
	argument.
	* s390-linux-nat.c (s390_can_use_hw_breakpoint): Add 'self'
	argument.
	* remote.c (remote_check_watch_resources): Add 'self' argument.
	* remote-mips.c (mips_can_use_watchpoint): Add 'self' argument.
	* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Add 'self'
	argument.
	* procfs.c (procfs_can_use_hw_breakpoint): Add 'self' argument.
	* ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Add 'self'
	argument.
	* nto-procfs.c (procfs_can_use_hw_breakpoint): Add 'self'
	argument.
	* mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Add 'self'
	argument.
	* inf-ttrace.c (inf_ttrace_can_use_hw_breakpoint): Add 'self'
	argument.
	* ia64-linux-nat.c (ia64_linux_can_use_hw_breakpoint): Add 'self'
	argument.
	* ia64-hpux-nat.c (ia64_hpux_can_use_hw_breakpoint): Add 'self'
	argument.
	* i386-nat.c (i386_can_use_hw_breakpoint): Add 'self' argument.
	* arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Add 'self'
	argument.
	* aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Add
	'self' argument.
 2014-02-19 07:45:30 -07:00
Tom Tromey
f045800c90 Add target_ops argument to to_post_attach 
2014-02-19  Tom Tromey  <tromey@redhat.com>

	* target.h (struct target_ops) <to_post_attach>: Add argument.
	(target_post_attach): Add argument.
	* target.c (debug_to_post_attach): Add argument.
	(update_current_target): Update.
	* spu-linux-nat.c (spu_child_post_attach): Add 'self' argument.
	* nto-procfs.c (procfs_post_attach): Add 'self' argument.
	* linux-nat.c (linux_child_post_attach): Add 'self' argument.
	* inf-ptrace.c (inf_ptrace_post_attach): Add 'self' argument.
	* inf-child.c (inf_child_post_attach): Add 'self' argument.
 2014-02-19 07:45:29 -07:00
Tom Tromey
6a109b6b2c add "this" pointers to more target APIs 
A subsequent pass introduces delegation helper functions to the target
API.  This delegation is much cleaner if the target_ops pointer is
directly available at delegation time.

This patch adds the "this" pointer to various to_* methods for this
purpose.

This updates a number of ports which I am unable to test.  Please give
them a look-over.  Any possible problem here is trivial, though, as
all that is required is adding an argument to a function.

2014-02-19  Tom Tromey  <tromey@redhat.com>

	* aarch64-linux-nat.c (aarch64_linux_stopped_by_watchpoint):
	Add 'ops' argument.
	* arm-linux-nat.c (arm_linux_stopped_by_watchpoint): Add
	'ops' argument.
	* i386-nat.c (i386_stopped_by_watchpoint): Add 'ops' argument.
	* ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Add
	'ops' argument.
	* inf-ttrace.c (inf_ttrace_stopped_by_watchpoint): Add 'ops'
	argument.
	* linux-nat.c (save_sigtrap): Update.
	(linux_nat_stopped_by_watchpoint, linux_nat_is_async_p)
	(linux_nat_can_async_p, linux_nat_async): Add 'ops' argument.
	(linux_nat_close): Update.
	* mips-linux-nat.c (mips_linux_stopped_by_watchpoint): Add 'ops'
	argument.
	* ppc-linux-nat.c (ppc_linux_stopped_by_watchpoint): Add 'ops'
	argument.
	* procfs.c (procfs_stopped_by_watchpoint): Add 'ops' argument.
	* record-full.c (record_full_beneath_to_stopped_by_watchpoint)
	(record_full_beneath_to_async, tmp_to_stopped_by_watchpoint)
	(tmp_to_async): Add 'ops' argument.
	(record_full_stopped_by_watchpoint, record_full_async)
	(record_full_can_async_p, record_full_is_async_p): Add 'ops'
	argument.
	* remote-m32r-sdi.c (m32r_insert_breakpoint, m32r_remove_breakpoint)
	(m32r_stopped_by_watchpoint): Add 'ops' argument.
	* remote-mips.c	(mips_stopped_by_watchpoint): Add 'ops' argument.
	* remote.c (remote_stopped_by_watchpoint_p, remote_can_async_p)
	(remote_is_async_p, remote_async): Add 'ops' argument.
	(remote_stopped_data_address): Update.
	* s390-nat.c (s390_stopped_by_watchpoint): Add 'ops' argument.
	* target.c (update_current_target)
	(find_default_can_async_p, find_default_is_async_p): Update.
	(init_dummy_target): Update.
	(debug_to_stopped_by_watchpoint): Add 'ops' argument.
	* target.h (struct target_ops) <to_stopped_by_watchpoint,
	to_can_async_p, to_is_async_p, to_async>: Add 'ops' argument.
	(target_can_async_p, target_is_async_p, target_async)
	(target_stopped_by_watchpoint): Update.
 2014-02-19 07:45:20 -07:00
Markus Metzger
3db08215d4 target, breakpoint: allow insert/remove breakpoint to be forwarded 
2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

	* target.h (target_ops) <to_insert_breakpoint>
	<to_remove_breakpoint>: Add target_ops parameter.
	(forward_target_insert_breakpoint): New.
	(forward_target_remove_breakpoint): New.
	(memory_remove_breakpoint, memory_insert_breakpoint):
	Add target_ops parameter.
	* target.c (target_insert_breakpoint): Split into this and ...
	(forward_target_insert_breakpoint): ... this.
	(target_remove_breakpoint): Split into this and ...
	(forward_target_remove_breakpoint): ... this.
	(debug_to_insert_breakpoint): Add target_ops parameter.
	Call forward_target_insert_breakpoint.
	(debug_to_remove_breakpoint): Add target_ops parameter.
	Call forward_target_remove_breakpoint.
	(update_current_target): Do not inherit or default to_insert_breakpoint
	and to_remove_breakpoint.
	* corelow.c (ignore): Add target_ops parameter.
	* exec.c (ignore): Add target_ops parameter.
	* mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
	Add target_ops parameter.
	* monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
	Add target_ops parameter.
	* nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
	Add target_ops parameter.
	* record-full.c (record_full_beneath_to_insert_breakpoint)
	(record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
	(tmp_to_remove_breakpoint, record_full_insert_breakpoint)
	(record_full_remove_breakpoint, record_full_core_insert_breakpoint)
	(record_full_core_remove_breakpoint): Add target_ops parameter.
	Update users.
	(record_full_beneath_to_insert_breakpoint_ops)
	(record_full_beneath_to_remove_breakpoint_ops)
	(tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
	(record_full_open): Initialize tmp_to_insert_breakpoint_ops,
	tmp_to_remove_breakpoint_ops,
	record_full_beneath_to_insert_breakpoint_ops, and
	record_full_beneath_to_remove_breakpoint_ops.
	* remote-m32r-sdi.c (m32r_insert_breakpoint)
	(m32r_remove_breakpoint): Add target_ops parameter.
	* remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
	Add target_ops parameter.
	* remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
	Add target_ops parameter.
 2014-01-16 13:06:13 +01:00
Markus Metzger
f32dbf8c79 Add target_ops argument to to_prepare_to_store 
2013-12-17  Tom Tromey  <tromey@redhat.com>

	* windows-nat.c (windows_prepare_to_store): Add 'self' argument.
	* target.h (struct target_ops) <to_prepare_to_store>: Add
	argument.
	(target_prepare_to_store): Add argument.
	* target.c (debug_to_prepare_to_store): Add argument.
	(update_current_target): Update.
	* remote.c (remote_prepare_to_store): Add 'self' argument.
	* remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
	* remote-mips.c (mips_prepare_to_store): Add 'self' argument.
	* remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
	* record-full.c (record_full_core_prepare_to_store): Add 'self'
	argument.
	* ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
	* nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
	* monitor.c (monitor_prepare_to_store): Add 'self' argument.
	* inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
	* go32-nat.c (go32_prepare_to_store): Add 'self' argument.
 2014-01-16 13:06:10 +01:00
Joel Brobecker
ecd75fc8ee Update Copyright year range in all files maintained by GDB. 2014-01-01 07:54:24 +04:00
Tom Tromey
2978b11100 remove gdb_dirent.h 
This removes gdb_dirent.h and updates the code to use dirent.h
instead.  It also removes the now-useless configure checks.

2013-11-18  Tom Tromey  <tromey@redhat.com>

	* common/common.m4 (GDB_AC_COMMON): Don't use AC_HEADER_DIRENT.
	* common/gdb_dirent.h: Remove.
	* common/filestuff.c: Use dirent.h.
	* common/linux-osdata.c: Use dirent.h.
	(NAMELEN): Define.
	* config.in: Rebuild.
	* configure: Rebuild.
	* configure.ac: Don't use AC_HEADER_DIRENT.
	* linux-fork.c: Use dirent.h
	* linux-nat.c: Use dirent.h.
	* nto-procfs.c: Use dirent.h.
	* procfs.c: Use dirent.h.

2013-11-18  Tom Tromey  <tromey@redhat.com>

	* config.in: Rebuild.
	* configure: Rebuild.
	* configure.ac: Don't use AC_HEADER_DIRENT.
 2013-11-18 13:29:01 -07:00
Tom Tromey
0e9f083f4c remove gdb_string.h 
This removes gdb_string.h.  This patch is purely mechanical.  I
created it by running the two commands:

    git rm common/gdb_string.h
    perl -pi -e's/"gdb_string.h"/<string.h>/;'  *.[chyl] */*.[chyl]

2013-11-18  Tom Tromey  <tromey@redhat.com>

	* common/gdb_string.h: Remove.
	* aarch64-tdep.c: Use string.h, not gdb_string.h.
	* ada-exp.y: Use string.h, not gdb_string.h.
	* ada-lang.c: Use string.h, not gdb_string.h.
	* ada-lex.l: Use string.h, not gdb_string.h.
	* ada-typeprint.c: Use string.h, not gdb_string.h.
	* ada-valprint.c: Use string.h, not gdb_string.h.
	* aix-thread.c: Use string.h, not gdb_string.h.
	* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
	* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
	* alpha-nat.c: Use string.h, not gdb_string.h.
	* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
	* alpha-tdep.c: Use string.h, not gdb_string.h.
	* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
	* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
	* amd64-linux-nat.c: Use string.h, not gdb_string.h.
	* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
	* amd64-nat.c: Use string.h, not gdb_string.h.
	* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
	* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
	* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
	* arch-utils.c: Use string.h, not gdb_string.h.
	* arm-linux-nat.c: Use string.h, not gdb_string.h.
	* arm-linux-tdep.c: Use string.h, not gdb_string.h.
	* arm-tdep.c: Use string.h, not gdb_string.h.
	* arm-wince-tdep.c: Use string.h, not gdb_string.h.
	* armbsd-tdep.c: Use string.h, not gdb_string.h.
	* armnbsd-nat.c: Use string.h, not gdb_string.h.
	* armnbsd-tdep.c: Use string.h, not gdb_string.h.
	* armobsd-tdep.c: Use string.h, not gdb_string.h.
	* avr-tdep.c: Use string.h, not gdb_string.h.
	* ax-gdb.c: Use string.h, not gdb_string.h.
	* ax-general.c: Use string.h, not gdb_string.h.
	* bcache.c: Use string.h, not gdb_string.h.
	* bfin-tdep.c: Use string.h, not gdb_string.h.
	* breakpoint.c: Use string.h, not gdb_string.h.
	* build-id.c: Use string.h, not gdb_string.h.
	* buildsym.c: Use string.h, not gdb_string.h.
	* c-exp.y: Use string.h, not gdb_string.h.
	* c-lang.c: Use string.h, not gdb_string.h.
	* c-typeprint.c: Use string.h, not gdb_string.h.
	* c-valprint.c: Use string.h, not gdb_string.h.
	* charset.c: Use string.h, not gdb_string.h.
	* cli-out.c: Use string.h, not gdb_string.h.
	* cli/cli-cmds.c: Use string.h, not gdb_string.h.
	* cli/cli-decode.c: Use string.h, not gdb_string.h.
	* cli/cli-dump.c: Use string.h, not gdb_string.h.
	* cli/cli-interp.c: Use string.h, not gdb_string.h.
	* cli/cli-logging.c: Use string.h, not gdb_string.h.
	* cli/cli-script.c: Use string.h, not gdb_string.h.
	* cli/cli-setshow.c: Use string.h, not gdb_string.h.
	* cli/cli-utils.c: Use string.h, not gdb_string.h.
	* coffread.c: Use string.h, not gdb_string.h.
	* common/common-utils.c: Use string.h, not gdb_string.h.
	* common/filestuff.c: Use string.h, not gdb_string.h.
	* common/linux-procfs.c: Use string.h, not gdb_string.h.
	* common/linux-ptrace.c: Use string.h, not gdb_string.h.
	* common/signals.c: Use string.h, not gdb_string.h.
	* common/vec.h: Use string.h, not gdb_string.h.
	* core-regset.c: Use string.h, not gdb_string.h.
	* corefile.c: Use string.h, not gdb_string.h.
	* corelow.c: Use string.h, not gdb_string.h.
	* cp-abi.c: Use string.h, not gdb_string.h.
	* cp-support.c: Use string.h, not gdb_string.h.
	* cp-valprint.c: Use string.h, not gdb_string.h.
	* cris-tdep.c: Use string.h, not gdb_string.h.
	* d-lang.c: Use string.h, not gdb_string.h.
	* dbxread.c: Use string.h, not gdb_string.h.
	* dcache.c: Use string.h, not gdb_string.h.
	* demangle.c: Use string.h, not gdb_string.h.
	* dicos-tdep.c: Use string.h, not gdb_string.h.
	* disasm.c: Use string.h, not gdb_string.h.
	* doublest.c: Use string.h, not gdb_string.h.
	* dsrec.c: Use string.h, not gdb_string.h.
	* dummy-frame.c: Use string.h, not gdb_string.h.
	* dwarf2-frame.c: Use string.h, not gdb_string.h.
	* dwarf2loc.c: Use string.h, not gdb_string.h.
	* dwarf2read.c: Use string.h, not gdb_string.h.
	* elfread.c: Use string.h, not gdb_string.h.
	* environ.c: Use string.h, not gdb_string.h.
	* eval.c: Use string.h, not gdb_string.h.
	* event-loop.c: Use string.h, not gdb_string.h.
	* exceptions.c: Use string.h, not gdb_string.h.
	* exec.c: Use string.h, not gdb_string.h.
	* expprint.c: Use string.h, not gdb_string.h.
	* f-exp.y: Use string.h, not gdb_string.h.
	* f-lang.c: Use string.h, not gdb_string.h.
	* f-typeprint.c: Use string.h, not gdb_string.h.
	* f-valprint.c: Use string.h, not gdb_string.h.
	* fbsd-nat.c: Use string.h, not gdb_string.h.
	* findcmd.c: Use string.h, not gdb_string.h.
	* findvar.c: Use string.h, not gdb_string.h.
	* fork-child.c: Use string.h, not gdb_string.h.
	* frame.c: Use string.h, not gdb_string.h.
	* frv-linux-tdep.c: Use string.h, not gdb_string.h.
	* frv-tdep.c: Use string.h, not gdb_string.h.
	* gdb.c: Use string.h, not gdb_string.h.
	* gdb_bfd.c: Use string.h, not gdb_string.h.
	* gdbarch.c: Use string.h, not gdb_string.h.
	* gdbtypes.c: Use string.h, not gdb_string.h.
	* gnu-nat.c: Use string.h, not gdb_string.h.
	* gnu-v2-abi.c: Use string.h, not gdb_string.h.
	* gnu-v3-abi.c: Use string.h, not gdb_string.h.
	* go-exp.y: Use string.h, not gdb_string.h.
	* go-lang.c: Use string.h, not gdb_string.h.
	* go32-nat.c: Use string.h, not gdb_string.h.
	* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
	* hppa-linux-nat.c: Use string.h, not gdb_string.h.
	* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
	* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
	* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
	* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
	* i386-linux-nat.c: Use string.h, not gdb_string.h.
	* i386-linux-tdep.c: Use string.h, not gdb_string.h.
	* i386-nto-tdep.c: Use string.h, not gdb_string.h.
	* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
	* i386-tdep.c: Use string.h, not gdb_string.h.
	* i386bsd-tdep.c: Use string.h, not gdb_string.h.
	* i386gnu-nat.c: Use string.h, not gdb_string.h.
	* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
	* i386obsd-tdep.c: Use string.h, not gdb_string.h.
	* i387-tdep.c: Use string.h, not gdb_string.h.
	* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
	* ia64-linux-nat.c: Use string.h, not gdb_string.h.
	* inf-child.c: Use string.h, not gdb_string.h.
	* inf-ptrace.c: Use string.h, not gdb_string.h.
	* inf-ttrace.c: Use string.h, not gdb_string.h.
	* infcall.c: Use string.h, not gdb_string.h.
	* infcmd.c: Use string.h, not gdb_string.h.
	* inflow.c: Use string.h, not gdb_string.h.
	* infrun.c: Use string.h, not gdb_string.h.
	* interps.c: Use string.h, not gdb_string.h.
	* iq2000-tdep.c: Use string.h, not gdb_string.h.
	* irix5-nat.c: Use string.h, not gdb_string.h.
	* jv-exp.y: Use string.h, not gdb_string.h.
	* jv-lang.c: Use string.h, not gdb_string.h.
	* jv-typeprint.c: Use string.h, not gdb_string.h.
	* jv-valprint.c: Use string.h, not gdb_string.h.
	* language.c: Use string.h, not gdb_string.h.
	* linux-fork.c: Use string.h, not gdb_string.h.
	* linux-nat.c: Use string.h, not gdb_string.h.
	* lm32-tdep.c: Use string.h, not gdb_string.h.
	* m2-exp.y: Use string.h, not gdb_string.h.
	* m2-typeprint.c: Use string.h, not gdb_string.h.
	* m32c-tdep.c: Use string.h, not gdb_string.h.
	* m32r-linux-nat.c: Use string.h, not gdb_string.h.
	* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
	* m32r-rom.c: Use string.h, not gdb_string.h.
	* m32r-tdep.c: Use string.h, not gdb_string.h.
	* m68hc11-tdep.c: Use string.h, not gdb_string.h.
	* m68k-tdep.c: Use string.h, not gdb_string.h.
	* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
	* m68klinux-nat.c: Use string.h, not gdb_string.h.
	* m68klinux-tdep.c: Use string.h, not gdb_string.h.
	* m88k-tdep.c: Use string.h, not gdb_string.h.
	* macrocmd.c: Use string.h, not gdb_string.h.
	* main.c: Use string.h, not gdb_string.h.
	* mdebugread.c: Use string.h, not gdb_string.h.
	* mem-break.c: Use string.h, not gdb_string.h.
	* memattr.c: Use string.h, not gdb_string.h.
	* memory-map.c: Use string.h, not gdb_string.h.
	* mep-tdep.c: Use string.h, not gdb_string.h.
	* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
	* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
	* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
	* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
	* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
	* mi/mi-cmds.c: Use string.h, not gdb_string.h.
	* mi/mi-console.c: Use string.h, not gdb_string.h.
	* mi/mi-getopt.c: Use string.h, not gdb_string.h.
	* mi/mi-interp.c: Use string.h, not gdb_string.h.
	* mi/mi-main.c: Use string.h, not gdb_string.h.
	* mi/mi-parse.c: Use string.h, not gdb_string.h.
	* microblaze-rom.c: Use string.h, not gdb_string.h.
	* microblaze-tdep.c: Use string.h, not gdb_string.h.
	* mingw-hdep.c: Use string.h, not gdb_string.h.
	* minidebug.c: Use string.h, not gdb_string.h.
	* minsyms.c: Use string.h, not gdb_string.h.
	* mips-irix-tdep.c: Use string.h, not gdb_string.h.
	* mips-linux-tdep.c: Use string.h, not gdb_string.h.
	* mips-tdep.c: Use string.h, not gdb_string.h.
	* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
	* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
	* mipsread.c: Use string.h, not gdb_string.h.
	* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
	* mn10300-tdep.c: Use string.h, not gdb_string.h.
	* monitor.c: Use string.h, not gdb_string.h.
	* moxie-tdep.c: Use string.h, not gdb_string.h.
	* mt-tdep.c: Use string.h, not gdb_string.h.
	* nbsd-tdep.c: Use string.h, not gdb_string.h.
	* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
	* nto-procfs.c: Use string.h, not gdb_string.h.
	* nto-tdep.c: Use string.h, not gdb_string.h.
	* objc-lang.c: Use string.h, not gdb_string.h.
	* objfiles.c: Use string.h, not gdb_string.h.
	* opencl-lang.c: Use string.h, not gdb_string.h.
	* osabi.c: Use string.h, not gdb_string.h.
	* osdata.c: Use string.h, not gdb_string.h.
	* p-exp.y: Use string.h, not gdb_string.h.
	* p-lang.c: Use string.h, not gdb_string.h.
	* p-typeprint.c: Use string.h, not gdb_string.h.
	* parse.c: Use string.h, not gdb_string.h.
	* posix-hdep.c: Use string.h, not gdb_string.h.
	* ppc-linux-nat.c: Use string.h, not gdb_string.h.
	* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
	* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
	* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
	* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
	* printcmd.c: Use string.h, not gdb_string.h.
	* procfs.c: Use string.h, not gdb_string.h.
	* prologue-value.c: Use string.h, not gdb_string.h.
	* python/py-auto-load.c: Use string.h, not gdb_string.h.
	* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
	* ravenscar-thread.c: Use string.h, not gdb_string.h.
	* regcache.c: Use string.h, not gdb_string.h.
	* registry.c: Use string.h, not gdb_string.h.
	* remote-fileio.c: Use string.h, not gdb_string.h.
	* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
	* remote-mips.c: Use string.h, not gdb_string.h.
	* remote-sim.c: Use string.h, not gdb_string.h.
	* remote.c: Use string.h, not gdb_string.h.
	* reverse.c: Use string.h, not gdb_string.h.
	* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
	* ser-base.c: Use string.h, not gdb_string.h.
	* ser-go32.c: Use string.h, not gdb_string.h.
	* ser-mingw.c: Use string.h, not gdb_string.h.
	* ser-pipe.c: Use string.h, not gdb_string.h.
	* ser-tcp.c: Use string.h, not gdb_string.h.
	* ser-unix.c: Use string.h, not gdb_string.h.
	* serial.c: Use string.h, not gdb_string.h.
	* sh-tdep.c: Use string.h, not gdb_string.h.
	* sh64-tdep.c: Use string.h, not gdb_string.h.
	* shnbsd-tdep.c: Use string.h, not gdb_string.h.
	* skip.c: Use string.h, not gdb_string.h.
	* sol-thread.c: Use string.h, not gdb_string.h.
	* solib-dsbt.c: Use string.h, not gdb_string.h.
	* solib-frv.c: Use string.h, not gdb_string.h.
	* solib-osf.c: Use string.h, not gdb_string.h.
	* solib-spu.c: Use string.h, not gdb_string.h.
	* solib-target.c: Use string.h, not gdb_string.h.
	* solib.c: Use string.h, not gdb_string.h.
	* somread.c: Use string.h, not gdb_string.h.
	* source.c: Use string.h, not gdb_string.h.
	* sparc-nat.c: Use string.h, not gdb_string.h.
	* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
	* sparc-tdep.c: Use string.h, not gdb_string.h.
	* sparc64-tdep.c: Use string.h, not gdb_string.h.
	* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
	* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
	* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
	* spu-linux-nat.c: Use string.h, not gdb_string.h.
	* spu-multiarch.c: Use string.h, not gdb_string.h.
	* spu-tdep.c: Use string.h, not gdb_string.h.
	* stabsread.c: Use string.h, not gdb_string.h.
	* stack.c: Use string.h, not gdb_string.h.
	* std-regs.c: Use string.h, not gdb_string.h.
	* symfile.c: Use string.h, not gdb_string.h.
	* symmisc.c: Use string.h, not gdb_string.h.
	* symtab.c: Use string.h, not gdb_string.h.
	* target.c: Use string.h, not gdb_string.h.
	* thread.c: Use string.h, not gdb_string.h.
	* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
	* tilegx-tdep.c: Use string.h, not gdb_string.h.
	* top.c: Use string.h, not gdb_string.h.
	* tracepoint.c: Use string.h, not gdb_string.h.
	* tui/tui-command.c: Use string.h, not gdb_string.h.
	* tui/tui-data.c: Use string.h, not gdb_string.h.
	* tui/tui-disasm.c: Use string.h, not gdb_string.h.
	* tui/tui-file.c: Use string.h, not gdb_string.h.
	* tui/tui-layout.c: Use string.h, not gdb_string.h.
	* tui/tui-out.c: Use string.h, not gdb_string.h.
	* tui/tui-regs.c: Use string.h, not gdb_string.h.
	* tui/tui-source.c: Use string.h, not gdb_string.h.
	* tui/tui-stack.c: Use string.h, not gdb_string.h.
	* tui/tui-win.c: Use string.h, not gdb_string.h.
	* tui/tui-windata.c: Use string.h, not gdb_string.h.
	* tui/tui-winsource.c: Use string.h, not gdb_string.h.
	* typeprint.c: Use string.h, not gdb_string.h.
	* ui-file.c: Use string.h, not gdb_string.h.
	* ui-out.c: Use string.h, not gdb_string.h.
	* user-regs.c: Use string.h, not gdb_string.h.
	* utils.c: Use string.h, not gdb_string.h.
	* v850-tdep.c: Use string.h, not gdb_string.h.
	* valarith.c: Use string.h, not gdb_string.h.
	* valops.c: Use string.h, not gdb_string.h.
	* valprint.c: Use string.h, not gdb_string.h.
	* value.c: Use string.h, not gdb_string.h.
	* varobj.c: Use string.h, not gdb_string.h.
	* vax-tdep.c: Use string.h, not gdb_string.h.
	* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
	* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
	* windows-nat.c: Use string.h, not gdb_string.h.
	* xcoffread.c: Use string.h, not gdb_string.h.
	* xml-support.c: Use string.h, not gdb_string.h.
	* xstormy16-tdep.c: Use string.h, not gdb_string.h.
	* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
 2013-11-18 13:29:00 -07:00
Tom Tromey
52554a0e32 constify to_detach 
This patch constifies the target_ops method to_detach.

This is a small cleanup, but also, I think, a bug-prevention fix,
since gdb already acts as if the "args" argument here was const.

In particular, top.c:quit_force calls kill_or_detach via
iterate_over_inferiors.  kill_or_detach calls target_detach, passing
the same argument each time.  So, if one of these methods was not
const-correct, then kill_or_detach would change its behavior in a
strange way.

I could not build every target I modified in this patch.  I've
inspected them all by hand, though.  Many targets do not use the
"args" parameter; a couple pass it to atoi; and a few pass it on to
the to_detach method of the target beneath.  The only code that
required a real change was in linux-nat.c, and that only needed the
introduction of a temporary variable for const-correctness.

2013-11-08  Tom Tromey  <tromey@redhat.com>

	* aix-thread.c (aix_thread_detach): Update.
	* corelow.c (core_detach): Update.
	* darwin-nat.c (darwin_detach): Update.
	* dec-thread.c (dec_thread_detach): Update.
	* gnu-nat.c (gnu_detach): Update.
	* go32-nat.c (go32_detach): Update.
	* inf-ptrace.c (inf_ptrace_detach): Update.
	* inf-ttrace.c (inf_ttrace_detach): Update.
	* linux-fork.c (linux_fork_detach): Update.
	* linux-fork.h (linux_fork_detach): Update.
	* linux-nat.c (linux_nat_detach): Update.  Introduce "tem"
	local for const-correctness.
	* linux-thread-db.c (thread_db_detach): Update.
	* monitor.c (monitor_detach): Update.
	* nto-procfs.c (procfs_detach): Update.
	* procfs.c (procfs_detach): Update.
	* record.c (record_detach): Update.
	* record.h (record_detach): Update.
	* remote-m32r-sdi.c (m32r_detach): Update.
	* remote-mips.c (mips_detach): Update.
	* remote-sim.c (gdbsim_detach): Update.
	* remote.c (remote_detach_1, remote_detach)
	(extended_remote_detach): Update.
	* sol-thread.c (sol_thread_detach): Update.
	* target.c (target_detach): Make "args" const.
	(init_dummy_target): Update.
	* target.h (struct target_ops) <to_detach>: Make argument const.
	(target_detach): Likewise.
	* windows-nat.c (windows_detach): Update.
 2013-11-08 09:38:41 -07:00
Luis Machado
dfd4cc6311 * aarch64-linux-nat.c: Replace PIDGET with ptid_get_pid. 
Replace TIDGET with ptid_get_lwp.
	Replace GET_LWP with ptid_get_lwp.
	* aix-thread.c (BUILD_THREAD, BUILD_LWP): Remove.
	Replace BUILD_THREAD with ptid_build.
	Replace BUILD_LWP with ptid_build.
	Replace PIDGET with ptid_get_pid.
	Replace TIDGET with ptid_get_lwp.
	* alphabsd-nat.c: Replace PIDGET with ptid_get_pid.
	* amd64-linux-nat.c: Replace PIDGET with ptid_get_pid.
	Replace TIDGET with ptid_get_lwp.
	* amd64bsd-nat.c: Replace PIDGET with ptid_get_pid.
	* arm-linux-nat.c: Replace PIDGET with ptid_get_pid.
	Replace TIDGET with ptid_get_lwp.
	Replace GET_LWP with ptid_get_lwp.
	* armnbsd-nat.c: Replace PIDGET with ptid_get_pid.
	* auxv.c: Likewise.
	* breakpoint.c: Likewise.
	* common/ptid.c (ptid_is_pid): Condense check for
	null_ptid and minus_one_ptid.
	(ptid_lwp_p): New function.
	(ptid_tid_p): New function.
	* common/ptid.h: Update comments for accessors.
	(ptid_lwp_p): New prototype.
	(ptid_tid_p): New prototype.
	* defs.h (PIDGET, TIDGET, MERGEPID): Do not define.
	* gcore.c: Replace PIDGET with ptid_get_pid.
	* gdbthread.h: Likewise.
	* gnu-nat.c: Likewise.
	* hppa-linux-nat.c: Replace PIDGET with ptid_get_pid.
	Replace TIDGET with ptid_get_lwp.
	* hppabsd-nat.c: Replace PIDGET with ptid_get_pid.
	* hppanbsd-nat.c: Likewise.
	* i386-linux-nat.c: Replace PIDGET with ptid_get_pid.
	Replace TIDGET with ptid_get_lwp.
	* i386bsd-nat.c: Replace PIDGET with ptid_get_pid.
	* ia64-linux-nat.c: Replace PIDGET with ptid_get_pid.
	* infcmd.c: Likewise.
	* inferior.h: Likewise.
	* inflow.c: Likewise.
	* infrun.c: Likewise.
	* linux-fork.c: Likewise.
	* linux-nat.c: Replace PIDGET with ptid_get_pid.
	Replace GET_PID with ptid_get_pid.
	Replace is_lwp with ptid_lwp_p.
	Replace GET_LWP with ptid_get_lwp.
	Replace BUILD_LWP with ptid_build.
 2013-09-30 11:50:12 +00:00
Andrew Burgess
039e3c2282 Replace most uses of deprecated_throw_reason with quit. 
http://sourceware.org/ml/gdb-patches/2013-07/msg00778.html

gdb/ChangeLog

        * monitor.c (monitor_interrupt_query): Replace use of
        deprecated_throw_reason with quit.
        * nto-procfs.c (interrupt_query): Likewise.
        * remote-fileio.c (remote_fileio_sig_exit): Likewise.
        * remote-mips.c (mips_kill): Likewise.
        * remote.c (interrupt_query): Likewise.
 2013-07-31 12:44:33 +00:00
Joel Brobecker
28e7fd6234 Update years in copyright notice for the GDB files. 
Two modifications:
  1. The addition of 2013 to the copyright year range for every file;
  2. The use of a single year range, instead of potentially multiple
     year ranges, as approved by the FSF.
 2013-01-01 06:33:28 +00:00