mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-12 11:53:32 +08:00
acff96643e
104 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Siva Chandra
|
6c659fc2c7 |
Enable chained function calls in C++ expressions.
gdb/ChangeLog: * eval.c: Include gdbthread.h. (evaluate_subexp): Enable thread stack temporaries before evaluating a complete expression and clean them up after the evaluation is complete. * gdbthread.h: Include common/vec.h. (value_ptr): New typedef. (VEC (value_ptr)): New vector type. (value_vec): New typedef. (struct thread_info): Add new fields stack_temporaries_enabled and stack_temporaries. (enable_thread_stack_temporaries) (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries): Declare. * gdbtypes.c (class_or_union_p): New function. * gdbtypes.h (class_or_union_p): Declare. * infcall.c (call_function_by_hand): Store return values of class type as temporaries on stack. * thread.c (enable_thread_stack_temporaries): New function. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary): Likewise. (value_in_thread_stack_temporaries): Likewise. * value.c (value_force_lval): New function. * value.h (value_force_lval): Declare. gdb/testsuite/ChangeLog: * gdb.cp/chained-calls.cc: New file. * gdb.cp/chained-calls.exp: New file. * gdb.cp/smartp.exp: Remove KFAIL for "p c2->inta". |
||
Pedro Alves
|
7f5ef60532 |
PR gdb/12623: non-stop crashes inferior, PC adjustment and 1-byte insns
TL;DR - if we step an instruction that is as long as
decr_pc_after_break (1-byte on x86) right after removing the
breakpoint at PC, in non-stop mode, adjust_pc_after_break adjusts the
PC, but it shouldn't.
In non-stop mode, when a breakpoint is removed, it is moved to the
"moribund locations" list. This is because other threads that are
running may have tripped on that breakpoint as well, and we haven't
heard about it. When a trap is reported, we check if perhaps it was
such a deleted breakpoint that caused the trap. If so, we also need
to adjust the PC (decr_pc_after_break).
Now, say that, on x86:
- a breakpoint was placed at an address where we have an instruction
of the same length as decr_pc_after_break on this arch (1 on x86).
- the breakpoint is removed, and thus put on the moribund locations
list.
- the thread is single-stepped.
As there's no breakpoint inserted at PC anymore, the single-step
actually executes the 1-byte instruction normally. GDB should _not_
adjust the PC for the resulting SIGTRAP. But, adjust_pc_after_break
confuses the step SIGTRAP reported for this single-step as being a
SIGTRAP for the moribund location of the breakpoint that used to be at
the previous PC, and so infrun applies the decr_pc_after_break
adjustment incorrectly.
The confusion comes from the special case mentioned in the comment:
static void
adjust_pc_after_break (struct execution_control_state *ecs)
{
...
As a special case, we could have hardware single-stepped a
software breakpoint. In this case (prev_pc == breakpoint_pc),
we also need to back up to the breakpoint address. */
if (thread_has_single_step_breakpoints_set (ecs->event_thread)
|| !ptid_equal (ecs->ptid, inferior_ptid)
|| !currently_stepping (ecs->event_thread)
|| (ecs->event_thread->stepped_breakpoint
&& ecs->event_thread->prev_pc == breakpoint_pc))
regcache_write_pc (regcache, breakpoint_pc);
The condition that incorrectly triggers is the
"ecs->event_thread->prev_pc == breakpoint_pc" one.
Afterwards, the next resume resume re-executes an instruction that had
already executed, which if you're lucky, results in the inferior
crashing. If you're unlucky, you'll get silent bad behavior...
The fix is to remember that we stepped a breakpoint. Turns out the
only case we step a breakpoint instruction today isn't covered by the
testsuite. It's the case of a 'handle nostop" signal arriving while a
step is in progress _and_ we have a software watchpoint, which forces
always single-stepping. This commit extends sigstep.exp to cover
that, and adds a new test for the adjust_pc_after_break issue.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-28 Pedro Alves <palves@redhat.com>
PR gdb/12623
* gdbthread.h (struct thread_info) <stepped_breakpoint>: New
field.
* infrun.c (resume) <stepping breakpoint instruction>: Set the
thread's stepped_breakpoint field. Skip if reverse debugging.
Add comment.
(init_thread_stepping_state, handle_signal_stop): Clear the
thread's stepped_breakpoint field.
gdb/testsuite/
2014-10-28 Pedro Alves <palves@redhat.com>
PR gdb/12623
* gdb.base/sigstep.c (no_handler): New global.
(main): If 'no_handler is true, set the signal handlers to
SIG_IGN.
* gdb.base/sigstep.exp (breakpoint_over_handler): Add
with_sw_watch and no_handler parameters. Handle them.
(top level) <stepping over handler when stopped at a breakpoint
test>: Add a test axis for testing with a software watchpoint, and
another for testing with the signal handler set to SIG_IGN.
* gdb.base/step-sw-breakpoint-adjust-pc.c: New file.
* gdb.base/step-sw-breakpoint-adjust-pc.exp: New file.
|
||
Doug Evans
|
28153fd321 |
Fix some comments to say minus_one_ptid instead of PID == -1.
gdb/ChangeLog: * gdbthread.h (set_running): Fix comment. (set_executing, finish_thread_state): Fix comment. |
||
|
Pedro Alves
|
ab970af197 |
remote: get rid of all the T packets when syncing the thread list
This commit avoids the prune_threads call in the remote target's target_update_thread_list's implementation, eliminating all the "thread alive" RSP traffic (one packet per thread) whenever we fetch the thread list. IOW, this: Sending packet: $Tp2141.2150#82...Packet received: OK Sending packet: $Tp2141.214f#b7...Packet received: OK Sending packet: $Tp2141.2141#82...Packet received: OK ... more T packets; it's one per previously known live thread ... Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n Becomes: Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n Tested on x86_64 Fedora 20, native gdbserver: - tests the qXfer:threads:read method. Tested on x86_64 Fedora 20, native gdbserver with qXfer:threads:read force-disabled in gdbserver: - So that GDB falls back to the qfThreadInfo/qsThreadInfo method. And also manually smoked tested force disabling both qXfer:threads:read and qfThreadInfo/qsThreadInfo in gdbserver. gdb/ 2014-10-15 Pedro Alves <palves@redhat.com> * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): New macro. * remote.c (remote_update_thread_list): Skip calling prune_threads if any thread listing method is supported, and instead walk over the set of remote threads listed, deleting those that are not found in GDB's thread list. |
||
|
Pedro Alves
|
e8032dde10 |
Push pruning old threads down to the target
When GDB wants to sync the thread list with the target's (e.g., due to
"info threads"), it calls update_thread_list:
update_thread_list (void)
{
prune_threads ();
target_find_new_threads ();
update_threads_executing ();
}
And then prune_threads does:
prune_threads (void)
{
struct thread_info *tp, *next;
for (tp = thread_list; tp; tp = next)
{
next = tp->next;
if (!thread_alive (tp))
delete_thread (tp->ptid);
}
}
Calling thread_live on each thread one by one is expensive.
E.g., on Linux, it ends up doing kill(SIG0) once for each thread. Not
a big deal, but still a bunch of syscalls...
With the remote target, it's cumbersome. That thread_alive call ends
up generating one T packet per thread:
Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
That seems a bit silly when target_find_new_threads method
implementations will always fetch the whole current set of target
threads, and then add those that are not in GDB's thread list, to
GDB's thread list.
This patch thus pushes down the responsibility of pruning dead threads
to the target_find_new_threads method instead, so a target may
implement pruning dead threads however it wants.
Once we do that, target_find_new_threads becomes a misnomer, so the
patch renames it to target_update_thread_list.
The patch doesn't attempt to do any optimization to any target yet.
It simply exports prune_threads, and makes all implementations of
target_update_thread_list call that. It's meant to be a no-op.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* ada-tasks.c (print_ada_task_info, task_command_1): Adjust.
* bsd-uthread.c (bsd_uthread_find_new_threads): Rename to ...
(bsd_uthread_update_thread_list): ... this. Call prune_threads.
(bsd_uthread_target): Adjust.
* corelow.c (core_open): Adjust.
* dec-thread.c (dec_thread_find_new_threads): Update comment.
(dec_thread_update_thread_list): New function.
(init_dec_thread_ops): Adjust.
* gdbthread.h (prune_threads): New declaration.
* linux-thread-db.c (thread_db_find_new_threads): Rename to ...
(thread_db_update_thread_list): ... this. Call prune_threads.
(init_thread_db_ops): Adjust.
* nto-procfs.c (procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
(procfs_attach, procfs_create_inferior, init_procfs_targets):
Adjust.
* obsd-nat.c (obsd_find_new_threads): Rename to ...
(obsd_update_thread_list): ... this. Call prune_threads.
(obsd_add_target): Adjust.
* procfs.c (procfs_target): Adjust.
(procfs_notice_thread): Update comment.
(procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
* ravenscar-thread.c (ravenscar_update_inferior_ptid): Update
comment.
(ravenscar_wait): Adjust.
(ravenscar_find_new_threads): Rename to ...
(ravenscar_update_thread_list): ... this. Call prune_threads.
(init_ravenscar_thread_ops): Adjust.
* record-btrace.c (record_btrace_find_new_threads): Rename to ...
(record_btrace_update_thread_list): ... this. Adjust comment.
(init_record_btrace_ops): Adjust.
* remote.c (remote_threads_info): Rename to ...
(remote_update_thread_list): ... this. Call prune_threads.
(remote_start_remote, extended_remote_attach_1, init_remote_ops):
Adjust.
* sol-thread.c (check_for_thread_db): Adjust.
(sol_find_new_threads_callback): Rename to ...
(sol_update_thread_list_callback): ... this.
(sol_find_new_threads): Rename to ...
(sol_update_thread_list): ... this. Call prune_threads. Adjust.
(sol_get_ada_task_ptid, init_sol_thread_ops): Adjust.
* target-delegates.c: Regenerate.
* target.c (target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* target.h (struct target_ops): Rename to_find_new_threads field
to to_update_thread_list.
(target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* thread.c (prune_threads): Make extern.
(update_thread_list): Adjust.
|
||
|
Pedro Alves
|
34b7e8a6ad |
Make single-step breakpoints be per-thread
This patch finally makes each thread have its own set of single-step breakpoints. This paves the way to have multiple threads software single-stepping, though this patch doesn't flip that switch on yet. That'll be done on a subsequent patch. gdb/ 2014-10-15 Pedro Alves <palves@redhat.com> * breakpoint.c (single_step_breakpoints): Delete global. (insert_single_step_breakpoint): Adjust to store the breakpoint pointer in the current thread. (single_step_breakpoints_inserted, remove_single_step_breakpoints) (cancel_single_step_breakpoints): Delete functions. (breakpoint_has_location_inserted_here): Make extern. (single_step_breakpoint_inserted_here_p): Adjust to walk the breakpoint list. * breakpoint.h (breakpoint_has_location_inserted_here): New declaration. (single_step_breakpoints_inserted, remove_single_step_breakpoints) (cancel_single_step_breakpoints): Remove declarations. * gdbthread.h (struct thread_control_state) <single_step_breakpoints>: New field. (delete_single_step_breakpoints) (thread_has_single_step_breakpoints_set) (thread_has_single_step_breakpoint_here): New declarations. * infrun.c (follow_exec): Also clear the single-step breakpoints. (singlestep_breakpoints_inserted_p, singlestep_ptid) (singlestep_pc): Delete globals. (infrun_thread_ptid_changed): Remove references to removed globals. (resume_cleanups): Delete the current thread's single-step breakpoints. (maybe_software_singlestep): Remove references to removed globals. (resume): Adjust to use thread_has_single_step_breakpoints_set and delete_single_step_breakpoints. (init_wait_for_inferior): Remove references to removed globals. (delete_thread_infrun_breakpoints): Delete the thread's single-step breakpoints too. (delete_just_stopped_threads_infrun_breakpoints): Don't delete single-step breakpoints here. (delete_stopped_threads_single_step_breakpoints): New function. (adjust_pc_after_break): Adjust to use thread_has_single_step_breakpoints_set. (handle_inferior_event): Remove references to removed globals. Use delete_stopped_threads_single_step_breakpoints. (handle_signal_stop): Adjust to per-thread single-step breakpoints. Swap test order to do cheaper tests first. (switch_back_to_stepped_thread): Extend debug output. Remove references to removed globals. * record-full.c (record_full_wait_1): Adjust to per-thread single-step breakpoints. * thread.c (delete_single_step_breakpoints) (thread_has_single_step_breakpoints_set) (thread_has_single_step_breakpoint_here): New functions. (clear_thread_inferior_resources): Also delete the thread's single-step breakpoints. |
||
|
Pedro Alves
|
963f9c80cb |
Rewrite non-continuable watchpoints handling
When GDB finds out the target triggered a watchpoint, and the target has non-continuable watchpoints, GDB sets things up to step past the instruction that triggered the watchpoint. This is just like stepping past a breakpoint, but goes through a different mechanism - it resumes only the thread that needs to step past the watchpoint, but also switches a "infwait state" global, that has the effect that the next target_wait only wait for events only from that thread. This forcing of a ptid to pass to target_wait obviously becomes a bottleneck if we ever support stepping past different watchpoints simultaneously (in separate processes). It's also unnecessary -- the target should only return events for threads that have been resumed; if no other thread than the one we're stepping past the watchpoint has been resumed, then those other threads should not report events. If we couldn't assume that, then stepping past regular breakpoints would be broken for not likewise forcing a similar infwait_state. So this patch eliminates infwait_state, and instead teaches keep_going to mark step_over_info in a way that has the breakpoints module skip inserting watchpoints (because we're stepping past one), like it skips breakpoints when we're stepping past one. Tested on: - x86_64 Fedora 20 (continuable watchpoints) - PPC64 Fedora 18 (non-steppable watchpoints) gdb/ 2014-10-15 Pedro Alves <palves@redhat.com> * breakpoint.c (should_be_inserted): Don't insert watchpoints if trying to step past a non-steppable watchpoint. * gdbthread.h (struct thread_info) <stepping_over_watchpoint>: New field. * infrun.c (struct step_over_info): Add new field 'nonsteppable_watchpoint_p' and adjust comments. (set_step_over_info): New 'nonsteppable_watchpoint_p' parameter. Adjust. (clear_step_over_info): Clear nonsteppable_watchpoint_p as well. (stepping_past_nonsteppable_watchpoint): New function. (step_over_info_valid_p): Also return true if stepping past a nonsteppable watchpoint. (proceed): Adjust call to set_step_over_info. Remove reference to init_infwait_state. (init_wait_for_inferior): Remove reference to init_infwait_state. (waiton_ptid): Delete global. (struct execution_control_state) <stepped_after_stopped_by_watchpoint>: Delete field. (wait_for_inferior, fetch_inferior_event): Always pass minus_one_ptid to target_wait. (init_thread_stepping_state): Clear 'stepping_over_watchpoint' field. (init_infwait_state): Delete function. (handle_inferior_event): Remove infwait_state handling. (handle_signal_stop) <watchpoints handling>: Adjust after stepped_after_stopped_by_watchpoint removal. Don't remove breakpoints here nor set infwait_state. Set the thread's stepping_over_watchpoint flag, and call keep_going instead. (keep_going): Handle stepping_over_watchpoint. Adjust set_step_over_info calls. * infrun.h (stepping_past_nonsteppable_watchpoint): Declare function. |
||
|
Pedro Alves
|
b57bacecd5 |
Fix non-stop regressions caused by "breakpoints always-inserted off" changes
Commit
|
||
|
Pedro Alves
|
32990adaad |
Reduce Hg packet (select remote general thread) bouncing
A patch I wrote made GDB pull the thread list sooner when debugging with target remote, and I noticed an intended consequence. GDB started bouncing around the currently selected remote/general thread more frequently. E.g.: Sending packet: $qTMinFTPILen#3b...Packet received: 5 +Sending packet: $Hgp726d.726d#53...Packet received: OK Sending packet: $m400680,40#2f...Packet received: 85c0741455bff00d60004889e5ffd05de97bffffff0f1f00e973ffffff0f1f00554889e5c745fc00000000c745fc01000000e900000000c745fc02000000b800 +Sending packet: $Hgp726d.7278#28...Packet received: OK Sending packet: $m4006b2,1#28...Packet received: e9 Fast tracepoint 2 at 0x4006b2: file gdb/testsuite/gdb.trace/range-stepping.c, line 53. Sending packet: $qTStatus#49...Packet received: T0;tnotrun:0;tframes:0;tcreated:0;tfree:500000;tsize:500000;circular:0;disconn:0;starttime:0;stoptime:0;username:;notes:: This ended up breaking "tstart" when one has fast tracepoints set, because gdbserver isn't expecting an Hg packet in response to qRelocInsn: (gdb) ftrace *set_point Fast tracepoint 3 at 0x4006b2: file gdb/testsuite/gdb.trace/range-stepping.c, line 53. (gdb) PASS: gdb.trace/range-stepping.exp: ftrace: ftrace *set_point tstart gdbserver: Malformed response to qRelocInsn, ignoring: Hgp2783.2783 Target does not support this command. (gdb) FAIL: gdb.trace/range-stepping.exp: ftrace: tstart remote_trace_start should probably start by making sure the remote current thread matches inferior_ptid (calling set_general_thread), but still, reducing unnecessary bouncing is a good idea. It happens because the memory/symbol/breakpoint routines use switch_to_program_space_and_thread to do something in the right context and then revert back to the previously current thread. The fix is to simply make any_thread_of_process, find_inferior_for_program_space, etc. give preference to the current thread/inferior it if matches. gdb/ 2014-10-02 Pedro Alves <palves@redhat.com> * gdbthread.h (any_thread_of_process, any_live_thread_of_process): Adjust comments. * inferior.c (find_inferior_for_program_space): Give preference to the current inferior. * inferior.h (find_inferior_for_program_space): Update comment. * progspace.c (switch_to_program_space_and_thread): Prefer the current inferior if it's bound to the program space requested. If the inferior found doesn't have a PID yet, don't bother looking up a thread. * progspace.h (switch_to_program_space_and_thread): Adjust comment. * thread.c (any_thread_of_process, any_live_thread_of_process): Give preference to the current thread. |
||
|
Pedro Alves
|
705096250d |
Always pass signals to the right thread
Currently, GDB can pass a signal to the wrong thread in several
different but related scenarios.
E.g., if thread 1 stops for signal SIGFOO, the user switches to thread
2, and then issues "continue", SIGFOO is actually delivered to thread
2, not thread 1. This obviously messes up programs that use
pthread_kill to send signals to specific threads.
This has been a known issue for a long while. Back in 2008 when I
made stop_signal be per-thread (
|
||
Doug Evans
|
e86c23a851 |
Revert gdbthread.h (any_running): Declare.
Not properly marked as 1/2.
This reverts commit
|
||
|
Doug Evans
|
1a76d59888 |
* gdbthread.h (any_running): Declare.
* thread.c (any_running): New function. |
||
Yao Qi
|
78c164b006 |
Remove any_running
Function any_running isn't used. This patch is to remove it. Rebuild GDB for linux and mingw. gdb: 2014-06-19 Yao Qi <yao@codesourcery.com> * gdbthread.h (any_running): Remove the declaration. * thread.c (any_running): Remove. |
||
|
Yao Qi
|
f6e29b6ec0 |
Use enum thread_state
This patch is to change field state's type to 'enum thread_state', and replace RUNNING with THREAD_RUNNING and STOPPED with THREAD_STOPPED respectively in comments. gdb: 2014-06-19 Yao Qi <yao@codesourcery.com> * gdbthread.h (struct thread_info) <state>: Change its type to 'enum thread_state'. Update comments. |
||
|
Pedro Alves
|
034f788c5e |
Fix next over threaded execl with "set scheduler-locking step".
Running gdb.threads/thread-execl.exp with scheduler-locking set to "step" reveals a problem: (gdb) next^M [Thread 0x7ffff7fda700 (LWP 27168) exited]^M [New LWP 27168]^M [Thread 0x7ffff74ee700 (LWP 27174) exited]^M process 27168 is executing new program: /home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.threads/thread-execl^M [Thread debugging using libthread_db enabled]^M Using host libthread_db library "/lib64/libthread_db.so.1".^M infrun.c:5225: internal-error: switch_back_to_stepped_thread: Assertion `!schedlock_applies (1)' failed.^M A problem internal to GDB has been detected,^M further debugging may prove unreliable.^M Quit this debugging session? (y or n) FAIL: gdb.threads/thread-execl.exp: schedlock step: get to main in new image (GDB internal error) The assertion is correct. The issue is that GDB is mistakenly trying to switch back to an exited thread, that was previously stepping when it exited. This is exactly the sort of thing the test wants to make sure doesn't happen: # Now set a breakpoint at `main', and step over the execl call. The # breakpoint at main should be reached. GDB should not try to revert # back to the old thread from the old image and resume stepping it We don't see this bug with schedlock off only because a different sequence of events makes GDB manage to delete the thread instead of marking it exited. This particular internal error can be fixed by making the loop over all threads in switch_back_to_stepped_thread skip exited threads. But, looking over other ALL_THREADS users, all either can or should be skipping exited threads too. So for simplicity, this patch replaces ALL_THREADS with a new macro that skips exited threads itself, and updates everything to use it. Tested on x86_64 Fedora 20. gdb/ 2014-06-19 Pedro Alves <palves@redhat.com> * gdbthread.h (ALL_THREADS): Delete. (ALL_NON_EXITED_THREADS): New macro. * btrace.c (btrace_free_objfile): Use ALL_NON_EXITED_THREADS instead of ALL_THREADS. * infrun.c (find_thread_needs_step_over) (switch_back_to_stepped_thread): Use ALL_NON_EXITED_THREADS instead of ALL_THREADS. * record-btrace.c (record_btrace_open) (record_btrace_stop_recording, record_btrace_close) (record_btrace_is_replaying, record_btrace_resume) (record_btrace_find_thread_to_move, record_btrace_wait): Likewise. * remote.c (append_pending_thread_resumptions): Likewise. * thread.c (thread_apply_all_command): Likewise. gdb/testsuite/ 2014-06-19 Pedro Alves <palves@redhat.com> * gdb.threads/thread-execl.exp (do_test): New procedure, factored out from ... (top level): ... here. Iterate running tests under different scheduler-locking settings. |
||
|
Pedro Alves
|
17b2616cba |
PR gdb/13860: don't lose '-interpreter-exec console EXECUTION_COMMAND''s output in async mode.
The other part of PR gdb/13860 is about console execution commands in MI getting their output half lost. E.g., take the finish command, executed on a frontend's GDB console: sync: finish &"finish\n" ~"Run till exit from #0 usleep (useconds=10) at ../sysdeps/unix/sysv/linux/usleep.c:27\n" ^running *running,thread-id="1" (gdb) ~"0x00000000004004d7 in foo () at stepinf.c:6\n" ~"6\t usleep (10);\n" ~"Value returned is $1 = 0\n" *stopped,reason="function-finished",frame={addr="0x00000000004004d7",func="foo",args=[],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="6"},thread-id="1",stopped-threads="all",core="1" async: finish &"finish\n" ~"Run till exit from #0 usleep (useconds=10) at ../sysdeps/unix/sysv/linux/usleep.c:27\n" ^running *running,thread-id="1" (gdb) *stopped,reason="function-finished",frame={addr="0x00000000004004d7",func="foo",args=[],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="6"},gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0" Note how all the "Value returned" etc. output is missing in async mode. The same happens with e.g., catchpoints: =breakpoint-modified,bkpt={number="1",type="catchpoint",disp="keep",enabled="y",what="22016",times="1"} ~"\nCatchpoint " ~"1 (forked process 22016), 0x0000003791cbd8a6 in __libc_fork () at ../nptl/sysdeps/unix/sysv/linux/fork.c:131\n" ~"131\t pid = ARCH_FORK ();\n" *stopped,reason="fork",disp="keep",bkptno="1",newpid="22016",frame={addr="0x0000003791cbd8a6",func="__libc_fork",args=[],file="../nptl/sysdeps/unix/sysv/linux/fork.c",fullname="/usr/src/debug/glibc-2.14-394-g8f3b1ff/nptl/sysdeps/unix/sysv/linux/fork.c",line="131"},thread-id="1",stopped-threads="all",core="0" where all those ~ lines are missing in async mode, or just the "step" current line indication: s &"s\n" ^running *running,thread-id="all" (gdb) ~"13\t foo ();\n" *stopped,frame={addr="0x00000000004004ef",func="main",args=[{name="argc",value="1"},{name="argv",value="0x7fffffffdd78"}],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="13"},thread-id="1",stopped-threads="all",core="3" (gdb) Or in the case of the PRs example, the "Stopped due to shared library event" note: start &"start\n" ~"Temporary breakpoint 1 at 0x400608: file ../../../src/gdb/testsuite/gdb.mi/solib-main.c, line 21.\n" =breakpoint-created,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x0000000000400608",func="main",file="../../../src/gdb/testsuite/gdb.mi/solib-main.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.mi/solib-main.c",line="21",times="0",original-location="main"} ~"Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/solib-main \n" =thread-group-started,id="i1",pid="21990" =thread-created,id="1",group-id="i1" ^running *running,thread-id="all" (gdb) =library-loaded,id="/lib64/ld-linux-x86-64.so.2",target-name="/lib64/ld-linux-x86-64.so.2",host-name="/lib64/ld-linux-x86-64.so.2",symbols-loaded="0",thread-group="i1" ~"Stopped due to shared library event (no libraries added or removed)\n" *stopped,reason="solib-event",thread-id="1",stopped-threads="all",core="3" (gdb) IMO, if you're typing execution commands in a frontend's console, you expect to see their output. Indeed it's what you get in sync mode. I think async mode should do the same. Deciding what to mirror to the console wrt to breakpoints and random stops gets messy real fast. E.g., say "s" trips on a breakpoint. We'd clearly want to mirror the event to the console in this case. But what about more complicated cases like "s&; thread n; s&", and one of those steps spawning a new thread, and that thread hitting a breakpoint? It's impossible in general to track whether the thread had any relation to the commands that had been executed. So I think we should just simplify and always mirror breakpoints and random events to the console. Notes: - mi->out is the same as gdb_stdout when MI is the current interpreter. I think that referring to that directly is cleaner. An earlier revision of this patch made the changes that are now done in mi_on_normal_stop directly in infrun.c:normal_stop, and so not having an obvious place to put the new uiout by then, and not wanting to abuse CLI's uiout, I made a temporary uiout when necessary. - Hopefuly the rest of the patch is more or less obvious given the comments added. Tested on x86_64 Fedora 20, no regressions. 2014-05-21 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdbthread.h (struct thread_control_state): New field `command_interp'. * infrun.c (follow_fork): Copy the new thread control field to the child fork thread. (clear_proceed_status_thread): Clear the new thread control field. (proceed): Set the new thread control field. * interps.h (command_interp): Declare. * interps.c (command_interpreter): New global. (command_interp): New function. (interp_exec): Set `command_interpreter' while here. * cli-out.c (cli_uiout_dtor): New function. (cli_ui_out_impl): Install it. * mi/mi-interp.c: Include cli-out.h. (mi_cmd_interpreter_exec): Add comment. (restore_current_uiout_cleanup): New function. (ui_out_free_cleanup): New function. (mi_on_normal_stop): If finishing an execution command started by a CLI command, or any kind of breakpoint-like event triggered, print the stop event to the output (CLI) stream. * mi/mi-out.c (mi_ui_out_impl): Install NULL `dtor' handler. 2014-05-21 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp (line_callee4_next_step): New global. (top level): Test that output related to execution commands is sent to the console with CLI commands, but not with MI commands. Test that breakpoint events are always mirrored to the console. Also expect the new source line to be output after a "next" in async mode too. Make it a pass/fail test. * gdb.mi/mi-solib.exp: Test that the CLI solib event note is output. * lib/mi-support.exp (mi_gdb_expect_cli_output): New procedure. |
||
Joel Brobecker
|
ecd75fc8ee | Update Copyright year range in all files maintained by GDB. | ||
Luis Machado
|
dfd4cc6311 |
* aarch64-linux-nat.c: Replace PIDGET with ptid_get_pid.
Replace TIDGET with ptid_get_lwp. Replace GET_LWP with ptid_get_lwp. * aix-thread.c (BUILD_THREAD, BUILD_LWP): Remove. Replace BUILD_THREAD with ptid_build. Replace BUILD_LWP with ptid_build. Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * alphabsd-nat.c: Replace PIDGET with ptid_get_pid. * amd64-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * amd64bsd-nat.c: Replace PIDGET with ptid_get_pid. * arm-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. Replace GET_LWP with ptid_get_lwp. * armnbsd-nat.c: Replace PIDGET with ptid_get_pid. * auxv.c: Likewise. * breakpoint.c: Likewise. * common/ptid.c (ptid_is_pid): Condense check for null_ptid and minus_one_ptid. (ptid_lwp_p): New function. (ptid_tid_p): New function. * common/ptid.h: Update comments for accessors. (ptid_lwp_p): New prototype. (ptid_tid_p): New prototype. * defs.h (PIDGET, TIDGET, MERGEPID): Do not define. * gcore.c: Replace PIDGET with ptid_get_pid. * gdbthread.h: Likewise. * gnu-nat.c: Likewise. * hppa-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * hppabsd-nat.c: Replace PIDGET with ptid_get_pid. * hppanbsd-nat.c: Likewise. * i386-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * i386bsd-nat.c: Replace PIDGET with ptid_get_pid. * ia64-linux-nat.c: Replace PIDGET with ptid_get_pid. * infcmd.c: Likewise. * inferior.h: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Replace PIDGET with ptid_get_pid. Replace GET_PID with ptid_get_pid. Replace is_lwp with ptid_lwp_p. Replace GET_LWP with ptid_get_lwp. Replace BUILD_LWP with ptid_build. |
||
|
Pedro Alves
|
c1e36e3e91 |
range stepping: gdb
This patch teaches GDB to take advantage of target-assisted range stepping. It adds a new 'r ADDR1,ADDR2' action to vCont (vCont;r), meaning, "step once, and keep stepping as long as the thread is in the [ADDR1,ADDR2) range". Rationale: When user issues the "step" command on the following line of source, a = b + c + d * e - a; GDB single-steps every single instruction until the program reaches a new different line. E.g., on x86_64, that line compiles to: 0x08048434 <+65>: mov 0x1c(%esp),%eax 0x08048438 <+69>: mov 0x30(%esp),%edx 0x0804843c <+73>: add %eax,%edx 0x0804843e <+75>: mov 0x18(%esp),%eax 0x08048442 <+79>: imul 0x2c(%esp),%eax 0x08048447 <+84>: add %edx,%eax 0x08048449 <+86>: sub 0x34(%esp),%eax 0x0804844d <+90>: mov %eax,0x34(%esp) 0x08048451 <+94>: mov 0x1c(%esp),%eax and the following is the RSP traffic between GDB and GDBserver: --> vCont;s:p2e13.2e13;c <-- T0505:68efffbf;04:30efffbf;08:3c840408;thread:p2e13.2e13;core:1; --> vCont;s:p2e13.2e13;c <-- T0505:68efffbf;04:30efffbf;08:3e840408;thread:p2e13.2e13;core:2; --> vCont;s:p2e13.2e13;c <-- T0505:68efffbf;04:30efffbf;08:42840408;thread:p2e13.2e13;core:2; --> vCont;s:p2e13.2e13;c <-- T0505:68efffbf;04:30efffbf;08:47840408;thread:p2e13.2e13;core:0; --> vCont;s:p2e13.2e13;c <-- T0505:68efffbf;04:30efffbf;08:49840408;thread:p2e13.2e13;core:0; --> vCont;s:p2e13.2e13;c <-- T0505:68efffbf;04:30efffbf;08:4d840408;thread:p2e13.2e13;core:0; --> vCont;s:p2e13.2e13;c <-- T0505:68efffbf;04:30efffbf;08:51840408;thread:p2e13.2e13;core:0; IOW, a lot of roundtrips between GDB and GDBserver. If we add a new command to the RSP, meaning "keep stepping and don't report a stop until the program goes out of the [0x08048434, 0x08048451) address range", then the RSP traffic can be reduced down to: --> vCont;r8048434,8048451:p2db0.2db0;c <-- T0505:68efffbf;04:30efffbf;08:51840408;thread:p2db0.2db0;core:1; As number of packets is reduced dramatically, the performance of stepping source lines is much improved. In case something is wrong with range stepping on the stub side, the debug info or even gdb, this adds a "set/show range-stepping" command to be able to turn range stepping off. gdb/ 2013-05-23 Yao Qi <yao@codesourcery.com> Pedro Alves <palves@redhat.com> * gdbthread.h (struct thread_control_state) <may_range_step>: New field. * infcmd.c (step_once, until_next_command): Enable range stepping. * infrun.c (displaced_step_prepare): Disable range stepping. (resume): Disable range stepping if stepping over a breakpoint or we have software watchpoints. If range stepping is enabled, assert the thread is in the stepping range. (clear_proceed_status_thread): Clear may_range_step. (handle_inferior_event): Disable range stepping as soon as we know the thread that hit the event. Re-enable it whenever we're going to step with a step range. * remote.c (struct vCont_action_support) <r>: New field. (use_range_stepping): New global. (remote_vcont_probe): Handle 'r' action. (append_resumption): Append an 'r' action if the thread may range step. (show_range_stepping): New function. (set_range_stepping): New function. (_initialize_remote): Call add_setshow_boolean_cmd to register the 'set range-stepping' and 'show range-stepping' commands. * NEWS: Mention range stepping, the new vCont;r action, and the new "set/show range-stepping" commands. gdb/doc/ 2013-05-23 Yao Qi <yao@codesourcery.com> Pedro Alves <palves@redhat.com> * gdb.texinfo (Packets): Document 'vCont;r'. (Continuing and Stepping): Document target-assisted range stepping, and the 'set range-stepping' and 'show range-stepping' commands. |
||
|
Pedro Alves
|
ce4c476a0f |
Factor out in-stepping-range checks.
This adds a function for doing within-thread's-stepping-range checks, and converts a couple spots to use it. Following patches will add more uses. gdb/ 2013-05-23 Yao Qi <yao@codesourcery.com> Pedro Alves <palves@redhat.com> * gdbthread.h (pc_in_thread_step_range): New declaration. * thread.c (pc_in_thread_step_range): New function. * infrun.c (handle_inferior_event): Use it. |
||
Markus Metzger
|
02d2762576 |
Add branch trace information to struct thread_info.
Add functions to enable, disable, clear, and fetch a thread's branch trace. gdb/ * target.h: Include btrace.h. (struct target_ops) <to_supports_btrace, to_enable_btrace, to_disable_btrace, to_teardown_btrace, to_read_btrace>: New. * target.c (target_supports_btrace): New function. (target_enable_btrace): New function. (target_disable_btrace): New function. (target_teardown_btrace): New function. (target_read_btrace): New function. * btrace.h: New file. * btrace.c: New file. * Makefile.in: Add btrace.c. * gdbthread.h: Include btrace.h. (struct thread_info): Add btrace field. * thread.c: Include btrace.h. (clear_thread_inferior_resources): Call target_teardown_btrace. * common/btrace-common.h: New file. |
||
Joel Brobecker
|
28e7fd6234 |
Update years in copyright notice for the GDB files.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
||
|
Pedro Alves
|
e5ef252af0 |
gdb/
2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> * gdbthread.h (ALL_THREADS): New macro. (thread_list): Declare. * infrun.c (handle_inferior_event) <spurious signal>: Don't keep going, but instead fall through to the stepping handling. * linux-nat.c (resume_lwp): New parameter 'signo'. Resume with the passed in signal. Adjust debug output. (resume_callback): Rename to ... (linux_nat_resume_callback): ... this. Pass the thread's last stop signal, if in "pass" state. (linux_nat_resume): Adjust to rename. (stop_wait_callback): New assertion. Don't respawn signals; instead let the LWP remain with SIGNALLED set. (linux_nat_wait_1): Remove flushing of pending SIGSTOPs. * remote.c (append_pending_thread_resumptions): New. (remote_vcont_resume): Call it. * target.h (target_resume): Extend comment. gdb/testsuite/ 2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> * gdb.threads/siginfo-threads.exp: New file. * gdb.threads/siginfo-threads.c: New file. * gdb.threads/sigstep-threads.exp: New file. * gdb.threads/sigstep-threads.c: New file. |
||
Jan Kratochvil
|
e2e4d78b22 |
gdb/
Remove stale dummy frames. * breakpoint.c: Include dummy-frame.h. (longjmp_breakpoint_ops): New variable. (update_breakpoints_after_exec, breakpoint_init_inferior): Delete also bp_longjmp_call_dummy. (bpstat_what, bptype_string, print_one_breakpoint_location) (init_bp_location): Support bp_longjmp_call_dummy. (set_longjmp_breakpoint): Use longjmp_breakpoint_ops. Comment why. (set_longjmp_breakpoint_for_call_dummy) (check_longjmp_breakpoint_for_call_dummy, longjmp_bkpt_dtor): New functions. (initialize_breakpoint_ops): Initialize longjmp_breakpoint_ops. * breakpoint.h (enum bptype): New item bp_longjmp_call_dummy. Delete FIXME comment and extend the other comment for bp_call_dummy. (set_longjmp_breakpoint_for_call_dummy) (check_longjmp_breakpoint_for_call_dummy): New declarations. * dummy-frame.c: Include gdbthread.h. (pop_dummy_frame_bpt): New function. (pop_dummy_frame): Call pop_dummy_frame_bpt. (dummy_frame_discard): New function. (cleanup_dummy_frames): Update the comment about longjmps. * dummy-frame.h (dummy_frame_discard): New declaration. * gdbthread.h (struct thread_info): Extend initiating_frame comment. * infcall.c (call_function_by_hand): New variable longjmp_b. Call set_longjmp_breakpoint_for_call_dummy. Chain its breakpoints with BPT. * infrun.c (handle_inferior_event) <BPSTAT_WHAT_CLEAR_LONGJMP_RESUME>: Add case 4 comment. Call check_longjmp_breakpoint_for_call_dummy and keep_going if IS_LONGJMP and there is no other reason to stop. gdb/testsuite/ Remove stale dummy frames. * gdb.base/call-signal-resume.exp (maintenance print dummy-frames) (maintenance info breakpoints): New tests. * gdb.base/stale-infcall.c: New file. * gdb.base/stale-infcall.exp: New file. |
||
|
Pedro Alves
|
2ea286498f |
gdb/
2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout. gdb/gdbserver/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout. include/gdb/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout. sim/common/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace target_signal with gdb_signal throughout. |
||
|
Joel Brobecker
|
0b30217134 |
Copyright year update in most files of the GDB Project.
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
||
|
Pedro Alves
|
305962315a |
2011-09-13 Pedro Alves <pedro@codesourcery.com>
* gdbthread.h (enum thread_state): Moved here. (struct thread_info): Rename `executing_' field to `executing' and `state_' to `state'. * thread.c (enum thread_state): Moved to gdbthread.h. (new_thread, add_thread_silent, delete_thread_1) (any_live_thread_of_process, thread_alive, set_running) (set_running, is_thread_state, any_running, is_executing) (set_executing, finish_thread_state, print_thread_info) (do_captured_thread_select): Adjust. |
||
|
Yao Qi
|
ede1849f92 |
gdb/
* gdbthread.h (struct thread_info): Remove fields `stepping_through_solib_after_catch' and `stepping_through_solib_catchpoints'. * infrun.c (init_thread_stepping_state): Update. (process_event_stop_test, currently_stepping): Update. (currently_stepping_or_nexting_callback): Update. |
||
|
Yao Qi
|
6aa27652a7 |
gdb/
* gdbthread.h (struct thread_info): Comment on field `step_after_step_resume_breakpoint'. |
||
Marc Khouzam
|
9941e0c5c1 |
2011-04-19 Marc Khouzam <marc.khouzam@ericsson.com>
* thread.c (any_live_thread_of_process): Prioritize threads that are not executing. * gdbthread.h (any_live_thread_of_process): Update comment as per above change. |
||
Michael Snyder
|
aea5b2797c |
2011-02-21 Michael Snyder <msnyder@vmware.com>
* gdbthread.h (print_thread_info): Change prototype. * thread.c (print_thread_info): Accept char* instead of int for requested_threads argument. Use new function number_is_in_list to determine which threads to list. (info_threads_command): Pass char* to print_thread_info. * cli/cli-utils.c (number_is_in_list): New function. * cli/cli-utils.h (number_is_in_list): Export. * mi/mi-main.c (mi_cmd_thread_info): Pass char* to print_thread_info. (print_one_inferior): Ditto. (mi_cmd_list_thread_groups): Ditto. 2011-02-21 Michael Snyder <msnyder@vmware.com> * gdb.threads/thread-find.exp: Update patterns for changes in output of "info threads" command. |
||
Tom Tromey
|
4694da0147 |
gdb
PR mi/8618: * thread.c (free_thread): Free 'name'. (print_thread_info): Emit thread name. Change CLI output. (thread_name_command): New function. (do_captured_thread_select): Emit newline. (_initialize_thread): Register 'thread name' command. * target.h (struct target_ops) <to_thread_name>: New field. (target_thread_name): New macro. * target.c (update_current_target): Handle to_thread_name. * python/py-infthread.c (thpy_get_name): New function. (thpy_set_name): Likewise. (thread_object_getset): Add "name". * linux-nat.c (linux_nat_thread_name): New function. (linux_nat_add_target): Set to_thread_name. * gdbthread.h (struct thread_info) <name>: New field. gdb/doc * gdb.texinfo (Threads): Document thread name output and `thread name' command. (Threads In Python): Document Thread.name attribute. (GDB/MI Thread Commands): Document thread attributes. gdb/testsuite * gdb.python/py-infthread.exp: Add thread tests. |
||
|
Michael Snyder
|
0963b4bd45 |
2011-01-07 Michael Snyder <msnyder@vmware.com>
* ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. |
||
|
Joel Brobecker
|
7b6bb8daac | run copyright.sh for 2011. | ||
|
Tom Tromey
|
186c406b19 |
gdb
PR c++/9593: * thread.c (clear_thread_inferior_resources): Call delete_longjmp_breakpoint. * infrun.c (handle_inferior_event): Handle exception breakpoints. (handle_inferior_event): Likewise. (insert_exception_resume_breakpoint): New function. (check_exception_resume): Likewise. * inferior.h (delete_longjmp_breakpoint_cleanup): Declare. * infcmd.c (delete_longjmp_breakpoint_cleanup): No longer static. (step_1): Set thread's initiating frame. (until_next_continuation): New function. (until_next_command): Support exception breakpoints. (finish_command_continuation): Delete longjmp breakpoint. (finish_forward): Support exception breakpoints. * gdbthread.h (struct thread_info) <initiating_frame>: New field. * breakpoint.h (enum bptype) <bp_exception, bp_exception_resume, bp_exception_master>: New constants. (struct bpstat_what) <is_longjmp>: New field. (set_longjmp_breakpoint): Update. * breakpoint.c (create_exception_master_breakpoint): New function. (update_breakpoints_after_exec): Handle bp_exception_master. Call create_exception_master_breakpoint. (print_it_typical): Handle bp_exception_master, bp_exception. (bpstat_stop_status): Handle bp_exception_master. (bpstat_what): Handle bp_exception_master, bp_exception, bp_exception_resume. (bptype_string): Likewise. (print_one_breakpoint_location): Likewise. (allocate_bp_location): Likewise. (set_longjmp_breakpoint): Handle exception breakpoints. Change interface. (delete_longjmp_breakpoint): Handle exception breakpoints. (mention): Likewise. (struct until_break_command_continuation_args) <thread_num>: New field. (until_break_command_continuation): Call delete_longjmp_breakpoint. (until_break_command): Support exception breakpoints. (delete_command): Likewise. (breakpoint_re_set_one): Likewise. (breakpoint_re_set): Likewise. gdb/testuite * gdb.java/jnpe.java: New file. * gdb.java/jnpe.exp: New file. * gdb.cp/nextoverthrow.exp: New file. * gdb.cp/nextoverthrow.cc: New file. |
||
|
Jan Kratochvil
|
8358c15c55 |
gdb/
Fix step_resume_breakpoint unsaved during an infcall. * gdbthread.h (struct thread_control_state): Move here field step_resume_breakpoint ... (struct thread_info): ... from here. * infrun.c (save_infcall_control_state): Reset control.step_resume_breakpoint to NULL. (restore_infcall_control_state, discard_infcall_control_state): Delete control.step_resume_breakpoint. * arm-linux-tdep.c, infrun.c, thread.c: Update all the references to the moved field. gdb/testsuite/ Fix step_resume_breakpoint unsaved during an infcall. * gdb.base/step-resume-infcall.exp: New file. * gdb.base/step-resume-infcall.c: New file. |
||
|
Jan Kratochvil
|
16c381f058 |
gdb/
Rename and move inferior_thread_state and inferior_status. * gdbthread.h (struct thread_control_state): New struct, move fields step_range_start, step_range_end, step_frame_id, step_stack_frame_id, trap_expected, proceed_to_finish, in_infcall, step_over_calls, stop_step and stop_bpstat here from struct thread_info. (struct thread_suspend_state): New struct, move field stop_signal here from struct thread_info. (struct thread_info): Move the fields above from this struct. * inferior.h: Move the inferior_thread_state and inferior_status declarations comment to their definitions at infrun.c. (struct inferior_control_state): New struct, move field stop_soon from struct inferior here. (struct inferior_suspend_state): New empty struct. (struct inferior): New fields control and suspend. Move out field stop_soon. * infrun.c (struct inferior_thread_state): Rename to ... (infcall_suspend_state): ... here. Replace field stop_signal by fields thread_suspend and inferior_suspend. (save_inferior_thread_state): Rename to ... (save_infcall_suspend_state): ... here. New variable inf. Update the code for new fields. (restore_inferior_thread_state): Rename to ... (restore_infcall_suspend_state): ... here. New variable inf. Update the code for new fields. (do_restore_inferior_thread_state_cleanup): Rename to ... (do_restore_infcall_suspend_state_cleanup): ... here. (make_cleanup_restore_inferior_thread_state): Rename to ... (make_cleanup_restore_infcall_suspend_state): ... here. (discard_inferior_thread_state): Rename to ... (discard_infcall_suspend_state): ... here. (get_inferior_thread_state_regcache): Rename to ... (get_infcall_suspend_state_regcache): ... here. (struct inferior_status): Rename to ... (struct infcall_control_state): ... here. Replace fields step_range_start, step_range_end, step_frame_id, step_stack_frame_id, trap_expected, proceed_to_finish, in_infcall, step_over_calls, stop_step, stop_bpstat and stop_soon by fields thread_control and inferior_control. (save_inferior_status): Rename to ... (save_infcall_control_state): ... here. Update the code for new fields. (restore_inferior_status): Rename to ... (restore_infcall_control_state): ... here. Update the code for new fields. (do_restore_inferior_status_cleanup): Rename to ... (do_restore_infcall_control_state_cleanup): ... here. (make_cleanup_restore_inferior_status): Rename to ... (make_cleanup_restore_infcall_control_state): ... here. (discard_inferior_status): Rename to ... (discard_infcall_control_state): ... here. * alpha-tdep.c, breakpoint.c, dummy-frame.c, dummy-frame.h, exceptions.c, fbsd-nat.c, gdbthread.h, infcall.c, infcmd.c, inferior.c, inferior.h, infrun.c, linux-nat.c, mi/mi-interp.c, mips-tdep.c, procfs.c, solib-irix.c, solib-osf.c, solib-spu.c, solib-sunos.c, solib-svr4.c, thread.c, windows-nat.c: Update all the references to the moved fields and renamed functions. |
||
|
Jan Kratochvil
|
a289b8f64e |
gdb/
Revert: 2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <pedro@codesourcery.com> * gdbthread.h (currently_stepping): New declaration. * infrun.c (currently_stepping): Remove the forward declaration. (currently_stepping): Make it global. * linux-nat.c (resume_callback) <lp->stopped && lp->status == 0>: New variables tp and step, initialized them. Pass STEP to to_resume. Print also possibly "PTRACE_SINGLESTEP" if STEP. Initialize LP->STEP. * remote.c (currently_stepping_callback): New. (remote_vcont_resume) <ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid)>: New variable tp. Call currently_stepping_callback and step such thread. gdb/testsuite/ Revert: 2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.threads/sigstep-threads.exp: New file. * gdb.threads/sigstep-threads.c: New file. |
||
|
Jan Kratochvil
|
8aeb23f364 |
gdb/
* gdbthread.h (currently_stepping): New declaration. * infrun.c (currently_stepping): Remove the forward declaration. (currently_stepping): Make it global. * linux-nat.c (resume_callback) <lp->stopped && lp->status == 0>: New variables tp and step, initialized them. Pass STEP to to_resume. Print also possibly "PTRACE_SINGLESTEP" if STEP. Initialize LP->STEP. * remote.c (currently_stepping_callback): New. (remote_vcont_resume) <ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid)>: New variable tp. Call currently_stepping_callback and step such thread. gdb/testsuite/ * gdb.threads/sigstep-threads.exp: New file. * gdb.threads/sigstep-threads.c: New file. |
||
Vladimir Prus
|
dc146f7c09 |
Implement core awareness.
* bcache.c (compare_ints): Remove (print_percentage): Use compare_positive_ints. * defs.h (compare_positive_ints): Declare. * linux-nat.h (struct lin_lwp): New field core. (linux_nat_core_of_thread_1): Declare. * linux-nat.c (add_lwp): Init the 'core' field. (linux_nat_wait_1): Record the core. (linux_nat_core_of_thread_1, linux_nat_core_of_thread): New. (linux_nat_add_target): Register the above. * linux-thread-db.c (update_thread_core): New. (thread_db_find_new_threads): Update core information for every thread. * remote.c (struct private_thread_info): New. (free_private_thread_info, demand_private_info): New. (PACKET_qXfer_threads, use_osdata_threads): New. (struct thread_item, threads_parsing_context (start_thread, end_thread, thread_attributes) (thread_children, threads_children, threads_elements): New. (remote_threads_info): Try qXfer:threads before anything else. (remote_protocol_packets): Register qXfer:threads. (remote_open_1): Init use_osdata_threads. (struct stop_reply): New field 'core'. (remote_parse_stop_reply): Parse core number. (process_stop_reply): Record core number. (remote_xfer_partial): Handle qXfer:threads. (remote_core_of_thread): New. (init_remote_ops): Register remote_core_of_thread. (_initialize_remote): Register qXfer:read. * target.c (target_core_of_thread): New * target.h (enum target_object): New value TARGET_OBJECT_THREADS. (struct target_ops): New field to_core_of_threads. (target_core_of_thread): Declare. * gdbthread.h (struct thread_info): New field private_dtor. * thread.c (print_thread_info): Report the core. * ui-out.c (MAX_UI_OUT_LEVELS): Increase. * utils.c (compare_positive_ints): New. * features/threads.dtd: New. * mi/mi-interp.c (mi_on_normal_stop): Report the core. * mi/mi-main.c (struct collect_cores_data, collect_cores) (do_nothing, free_vector_of_osdata_items) (splay_tree_int_comparator, free_splay_tree): New. (print_one_inferior_data): Implemented printing of selected inferiors. Collect and print cores. (output_cores): New. (mi_cmd_list_thread_groups): Support --recurse. Permit specifying thread groups together with --available. |
||
|
Joel Brobecker
|
4c38e0a4fc |
Update copyright year in most headers.
Automatic update by copyright.sh. |
||
|
Pedro Alves
|
6c95b8df7f |
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode". |
||
|
Pedro Alves
|
2277426b30 |
gdb/
2009-07-02 Pedro Alves <pedro@codesourcery.com> * linux-nat.c (linux_child_follow_fork): If we're staying attached to the child process, enable event reporting on it. Don't handle checkpoints here. Instead, add the child fork to the lwp thread and inferior lists without clobbering the previous inferior. Let the thread_db layer learn about a new child process, even if following the parent. (linux_nat_switch_fork): Delete lwps of the current inferior only, instead of clearing the whole list. Use thread_change_ptid to give the core the illusion the new checkpoint is still the same inferior. Clear the register cache. (linux_handle_extended_wait): Handle checkpoints here. (linux_multi_process): Turn on. * linux-fork.c (struct fork_info) <pc>: Remove field. (init_fork_list): Do not delete the checkpoint from the inferior list (it is not there). (fork_load_infrun_state): Don't switch inferior_ptid here. Pass the new checkpoint's ptid to linux_nat_switch_fork. (fork_save_infrun_state): Make static. Don't stop the pc field of fork_info, it's gone. (linux_fork_mourn_inferior): Don't delete the checkpoint from the inferior list, it's not there. (linux_fork_detach): Ditto. (delete_fork_command): Replace mention of fork/checkpoint by checkpoint only. (detach_fork_command): Likewise. Don't delete the checkpoint from the inferior list. (info_forks_command): Adjust. (restore_detach_fork): Delete. (checkpointing_pid): New. (linux_fork_checkpointing_p): New. (save_detach_fork): Delete. (checkpoint_command): Delete temp_detach_fork. Don't remove breakpoints, that's a nop. Store the pid of the process we're checkpointing, and use make_cleanup_restore_integer to restore it. Don't reinsert breakpoints here. (process_command, fork_command): Delete. (restart_command): Update comments to only mention checkpoints, not forks. (_initialize_linux_fork): Delete "fork", "process", "info forks" commands. * linux-fork.h (fork_save_infrun_state, fork_list): Delete declarations. (linux_fork_checkpointing_p): Declare. * cli/cli-cmds.c (killlist): New. * cli/cli-cmds.h (killlist): Declare. * gdbcmd.h (killlist): Declare. * inferior.c: Include "gdbthread.h". (detach_inferior_command, kill_inferior_command) (inferior_command): New. (info_inferiors_command): Allow specifying a specific inferior id. (_initialize_inferiors): Register "inferior", "kill inferior" and "detach inferior" commands. * infcmd.c (_initialize_infcmd): Make "kill" a prefix command. * gdbthread.h (any_thread_of_process): Declare. * thread.c (any_thread_of_process): New. * NEWS: Mention multi-inferior debugging. Mention 'info inferiors', 'inferior', 'detach inferior' and 'kill inferior' as new commands. (Removed commands): New section, mentioning that 'info forks', 'fork', 'process', 'delete fork' and 'detach fork' are now gone. gdb/testsuite/ 2009-07-02 Pedro Alves <pedro@codesourcery.com> * gdb.base/multi-forks.exp: Only run detach-on-fork tests on linux. Adjust to use "inferior", "info inferiors", "detach inferior" and "kill inferior" instead of "restart", "info fork", "detach fork" and "delete fork". * gdb.base/ending-run.exp: Spell out "info". * gdb.base/help.exp: Adjust to use test_prefix_command_help for the "kill" command. gdb/doc/ 2009-07-02 Pedro Alves <pedro@codesourcery.com> * gdb.texinfo (Debugging multiple inferiors): Document the "inferior", "detach inferior" and "kill inferior" commands. (Debugging Programs with Multiple Processes): Adjust to mention generic "inferior" commands. Delete mention of "detach fork" and "delete fork". Cross reference to "Debugging multiple inferiors" section. |
||
Daniel Jacobowitz
|
edb3359dff |
gdb/
* NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function. |
||
|
Doug Evans
|
e09875d410 |
gdb:
Global renaming of find_thread_pid to find_thread_ptid. * gdbthread.h (find_thread_ptid): Renamed from find_thread_pid. * thread.c (find_thread_ptid): Renamed from find_thread_pid. All callers updated. gdbserver: Global renaming of find_thread_pid to find_thread_ptid. * server.h (find_thread_ptid): Renamed from find_thread_pid. * inferiors.c (find_thread_ptid): Renamed from find_thread_pid. All callers updated. |
||
|
Pedro Alves
|
e58b0e63bb |
gdb/
* gdbthread.h (struct thread_info): New `pending_follow' field. * thread.c (new_thread): New function. (add_thread_silent): Use it. * breakpoint.c (internal_breakpoint_number): New global, moved from inside... (create_internal_breakpoint): ... this. (clone_momentary_breakpoint): New. * breakpoint.h (clone_momentary_breakpoint): Declare. * infrun.c (nullify_last_target_wait_ptid): Move declaration higher. (pending_follow): Delete. (follow_fork): Handle pending follow fork event here. Moved the preserving of thread stepping state here. (resume): Don't handle pending follow fork events here. Only install the inferior's terminal modes if we're about to resume it. (proceed): Handle possible pending follow fork events here. (init_wait_for_inferior): No need to clear pending_follow anymore, it's gone. (handle_inferior_event): Adjust to per-thread `pending_follow'. Call `follow_fork' to handle following the fork. If the follow-fork is cancelled, stop stepping. * linux-nat.c (linux_child_follow_fork): Adjust to per-thread `pending_follow' events. Remove code that handled preserving the thread stepping state. * inf-ptrace.c (inf_ptrace_follow_fork): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork): Ditto. gdb/testsuite/ * gdb.threads/fork-thread-pending.c: New. * gdb.threads/fork-thread-pending.exp: New. |
||
|
Pedro Alves
|
bad34192e5 |
* remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
if the thread's ptid without a thread id field is in the list before calling thread_change_ptid. (extended_remote_attach_1): In non-stop mode, do not rely on querying the current thread, instead, query the thread list, and select the first thread of the process. * gdbthread.h (first_thread_of_process): Declare. * thread.c (first_thread_of_process): Define. |
||
|
Pedro Alves
|
c5a4d20bb9 |
* gdbthread.h (struct thread_info): Add in_infcall member.
* infcall.c (run_inferior_call): Save, set and restore in_infcall. Remove reverences to suppress_resume_observer. Refresh `call_thread' after returning from `proceed'. * infcmd.c (suppress_resume_observer): Delete. * inferior.h (suppress_resume_observer): Delete declaration. * mi/mi-interp.c (mi_on_resume): Suppress output while calling an inferior function. * thread.c (set_running): Remove references to suppress_resume_observer. * infrun.c (struct inferior_status): Add in_infcall member. (save_inferior_status): Save it. (restore_inferior_status): Restore it. |
||
|
Pedro Alves
|
29f49a6a4f |
PR gdb/9747:
* gdbthread.h (finish_thread_state, finish_thread_state_cleanup): Declare. * thread.c (finish_thread_state, finish_thread_state_cleanup): New. * infrun.c (wait_for_inferior, fetch_inferior_event): If an error is thrown while handling an event, finish the thread state. (normal_stop): Use finish_thread_state cleanup. * infcmd.c (run_command_1): If an error is thrown while starting the inferior, finish the thread state. |
||
|
Joel Brobecker
|
0fb0cc7590 | Updated copyright notices for most files. |