The linker tries to put the end of the last section in the relro
segment exactly on a page boundary, because the relro segment itself
must end on a page boundary. If for any reason this can't be done,
padding is inserted. Since the end of the relro segment is typically
between .got and .got.plt, padding effectively increases the size of
the GOT. This isn't nice for targets and code models with limited GOT
addressing.
The problem with the current code is that it doesn't cope very well
with aligned sections in the relro segment. When making .got aligned
to a 256 byte boundary for PowerPC64, I found that often the initial
alignment attempt failed and the fallback attempt to be less than
adequate. This is a particular problem for PowerPC64 since the
distance between .got and .plt affects the size of plt call stubs,
leading to "stubs don't match calculated size" errors.
So this rewrite takes a direct approach to calculating a new relro
base. Starting from the last section in the segment, we calculate
where it must start to position its end on the boundary, or as near as
possible considering alignment requirements. The new start then
becomes the goal for the previous section to end, and so on for all
sections. This of course ignores the possibility that user scripts
will place . = ALIGN(xxx); in the relro segment, or provide section
address expressions. In those cases we might fail, but the old code
probably did too, and a fallback is provided.
ld/
* ldexp.h (struct ldexp_control): Delete dataseg.min_base. Add
data_seg.relro_offset.
* ldexp.c (fold_binary <DATA_SEGMENT_ALIGN>): Don't set min_base.
(fold_binary <DATA_SEGMENT_RELRO_END>): Do set relro_offset.
* ldlang.c (lang_size_sections): Rewrite code adjusting relro
segment base to line up last section on page boundary.
ld/testsuite/
* ld-x86-64/pr18176.d: Update.
gold marks _init and _fini via symbol, ld marks them via section
(default scripts set .init and .fini section KEEP). This makes it
possible for people to write their own _init and not bother to put the
function into the right section.
PR ld/18223
* ldlang.c (lang_process): Add _init and _fini to gc_sym_list.
Adjusting the start of the relro segment in order to make it end
exactly on a page boundary runs into difficulties when sections in the
relro segment are aligned; Adjusting the start by (next_page - end)
sometimes results in more than that adjustment occurring at the end,
overrunning the page boundary. So when that occurs we try a new lower
start position by masking the adjusted start with the maximum section
alignment. However, we didn't consider that this masked start address
may in fact be before the initial relro base, which is silly since
that can only increase padding at the relro end.
I've also moved some calculations closer to where they are used, and
comments closer to the relevant statements.
* ldlang.c (lang_size_sections): When alignment of sections
results in relro base adjustment being too large, don't go lower
than the initial value.
* ldexp.c (fold_binary <DATA_SEGMENT_RELRO_END>): Comment.
* scripttempl/elf.sc (DATA_SEGMENT_ALIGN): Omit SEGMENT_SIZE
alignment when SEGMENT_SIZE is the same as MAXPAGESIZE.
LTO output objects have an STT_FILE symbol using the name of the file,
a temporary file. This results in executables that can't be exactly
reproduced, so the file name needs to be dropped. We don't want to
lose all file symbols when linking a mix of lto and non-lto objects as
a file symbol can be used to figure which source file generated a
given local symbol. So lto output objects need to be marked.
I chose to mark lto output objects with a new bfd flag. This flag is
also used to fix a bug in the link-once handling; An object being
loaded after "loading_lto_outputs" is set might be one extracted from
an archive to satisfy new references from lto objects, not an lto
object itself.
The new flag is copied from archive to elements, and the same done
for no_export. This fixes a bug in that --exclude-libs doesn't work
with thin archives. I'm not completely happy with this part of the
patch and may revist this to avoid the hack in
_bfd_look_for_bfd_in_cache.
PR ld/17973
include/
* bfdlink.h (struct bfd_link_info): Delete loading_lto_outputs.
bfd/
* bfd.c (struct bfd): Add lto_output.
* linker.c (_bfd_handle_already_linked): Explicitly test for
objects added by the lto plugin.
* opncls.c (_bfd_new_bfd_contained_in): Copy lto_output and
no_export flags from archive.
* archive.c (open_nested_file): New function, setting lto_output
and no_export, extracted from..
(find_nested_archive): ..here. Flip params. Rename from
_bfd_find_nested_archive.
(_bfd_get_elt_at_filepos): Correct var typo. Use open_nested_file.
(_bfd_look_for_bfd_in_cache): Copy no_export.
* elflink.c (elf_link_add_object_symbols): Remove now unnecessary
my_archive->no_export test.
(elf_link_input_bfd): Drop existing lto_output STT_FILE syms.
Don't use the file name when adding lto_output STT_FILE sym.
* bfd-in2.h: Regenerate.
ld/
* ldlang.h (struct lang_input_statement_flags): Add lto_output.
* ldlang.c (lang_process): Don't set loading_lto_outputs.
* ldfile.c (ldfile_try_open_bfd): Transfer entry flags.lto_output
to bfd.
* plugin.c (add_input_file, add_input_library): Set flags.lto_output.
The changes to reorder sections for better relro protection on powerpc64,
3e2b0f31, 23283c1b, and 5ad18f16, run into a problem with xlc.
xlc -qdatalocal puts global variables into .toc, which means that .toc
must be writable. The simplest way to accomplish this is to edit the
linker script to remove .toc sections from .got on detecting xlc object
files.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Add "object_in_toc".
* elf64-ppc.c (ppc64_elf_add_symbol_hook): Assume that global symbols
in .toc indicate xlc compiled code that might require a rw .toc.
ld/
* emulparams/elf64ppc.sh (INITIAL_READWRITE_SECTIONS): Define.
* emultempl/ppc64elf.em (params): Init new field.
(ppc_after_open): New function.
(LDEMUL_AFTER_OPEN): Define.
* ldlang.c (lang_final): Whitespace fix.
ld/testsuite/
* ld-powerpc/tocvar.d, * ld-powerpc/tocvar.s: New test.
* ld-powerpc/tocnovar.d, * ld-powerpc/tocnovar.s: New test.
* ld-powerpc/powerpc.exp: Run tocvar and tocnovar.
This patch fixes PR 4643 by allowing symbols in the LENGTH and ORIGIN
fields of MEMORY regions. Previously, only constants and constant
expressions are allowed.
For the AVR target, this helps define memory constraints more
accurately (per device), without having to create a ton of device
specific linker scripts.
ld/
PR 4643
* ldexp.c (fold_name): Fold LENGTH only after
lang_first_phase_enum.
* ldgram.y (memory_spec): Don't evaluate ORIGIN and LENGTH
rightaway.
* ldlang.h (struct memory_region_struct): Add origin_exp and
length_exp fields.
* ldlang.c (lang_do_memory_regions): New.
(lang_memory_region_lookup): Initialize origin_exp and
length_exp fields.
(lang_process): Call lang_do_memory_regions.
ld/testsuite/
* ld-scripts/memory.t: Define new symbol tred.
* ld-scripts/memory_sym.t: New.
* ld-scripts/script.exp: Perform MEMORY with symbols test, and
conditionally check values of linker symbols.
When creating a linker mapfile (using -Map=MAPFILE), we previously would
always try to evaluate the expression from a PROVIDE statement.
However, this is not always safe, consider:
PROVIDE (foo = 0x10);
PROVIDE (bar = foo);
In this example, if neither 'foo' or 'bar' is needed, then while
generating the linker mapfile evaluating the expression for 'foo' is
harmless (just the value 0x10). However, evaluating the expression for
'bar' requires the symbol 'foo', which is undefined. This used to cause
a fatal error.
This patch changes the behaviour, so that when the destination of the
PROVIDE is not defined (that is the PROVIDE is not going to provide
anything) the expression is not evaluated, and instead a special string
is displayed to indicate that the linker is discarding the PROVIDE
statement.
This change not only fixes the spurious undefined symbol error, but also
means that a user can now tell if a PROVIDE statement has provided
anything by inspecting the linker mapfile, something that could not be
done before.
ld/ChangeLog:
* ldlang.c (print_assignment): Only evaluate the expression for a
PROVIDE'd assignment when the destination is being defined.
Display a special message for PROVIDE'd symbols that are not being
provided.
ld/testsuite/ChangeLog:
* ld-scripts/provide-4.d: New file.
* ld-scripts/provide-4-map.d: New file.
* ld-scripts/provide-4.t: New file.
* ld-scripts/provide-5.d: New file.
* ld-scripts/provide-5.s: New file.
* ld-scripts/provide-5-map.d: New file.
* ld-scripts/provide-5.t: New file.
* ld-scripts/provide.exp: Run the provide-4.d and provide-5.d
tests.
Running lang_common before garbage collection means slightly less work
in garbage collection code, since common symbols should no longer
appear there. It does have the side effect of keeping linker script
symbols (at least those defined outside of sections) global too,
hence some testsuite churn.
bfd/
PR 17165
* elf-bfd.h (ELF_COMMON_DEF): Note that this might be true for
linker script assignments too.
* elflink.c (elf_gc_sweep_symbol): Don't drop ELF_COMMON_DEF syms.
(bfd_elf_gc_mark_dynamic_ref_symbol): Similarly.
ld/
PR 17165
* ldlang.c (lang_process): Run lang_common before lang_gc_sections.
ld/testsuite/
* ld-gc/pr14265.d,
* ld-cris/tls-gc-68.d,
* ld-cris/tls-gc-69.d,
* ld-cris/tls-gc-70.d,
* ld-cris/tls-gc-71.d,
* ld-cris/tls-gc-75.d,
* ld-cris/tls-gc-76.d,
* ld-cris/tls-gc-79.d,
* ld-mmix/bpo-10.d,
* ld-mmix/bpo-11.d: Update.
This moves support code for DEFINED to ldexp.c where it is used,
losing the lang_ prefix on identifiers. Two new functions are needed
to initialize and clean up to hash table, but other than that there
are no functional changes here.
* ldexp.c (struct definedness_hash_entry, definedness_table)
(definedness_newfunc, symbol_defined, update_definedness): Move
and rename from..
* ldlang.h (struct lang_definedness_hash_entry): ..here,..
* ldlang.c (lang_definedness_table, lang_definedness_newfunc)
(lang_symbol_defined, lang_update_definedness): ..and here.
* ldexp.c (ldexp_init, ldexp_finish): New functions, extracted from..
* ldlang.c (lang_init, lang_finish): ..here.
* ldexp.h (ldexp_init, ldexp_finish): Declare.
* ldlang.h (lang_symbol_defined, lang_update_definedness): Delete.
* ldmain.c (main): Call ldexp_init and ldexp_finish.
* ldlang.c (lang_add_input_file): If the first character in the
filename is '=', prepend the sysroot and force the context of that
input file to non-sysroot.
The "input_flags.sysrooted = 0" thing described in the comment is
covered by the testsuite part ("root-anchored =-prefixed script
inside"), but only observable for --with-sysroot configurations.
The idea here is to drop .eh_frame FDEs corresponding to dropped
comdat group sections or linkonce sections, but not perform changes in
encoding.
bfd/
PR 17467
* elf-eh-frame.c (ENSURE_NO_RELOCS): Don't stop at first NONE reloc.
(_bfd_elf_parse_eh_frame): When relocatable output, don't set
flags enabling conversion of CIEs and FDEs to use relative encoding.
(find_merged_cie): Similarly.
(_bfd_elf_write_section_eh_frame): Don't edit FDEs when
relocatable, except for CIE pointer.
* elflink.c (bfd_elf_reloc_symbol_deleted_p): Return true for
relocs against symbols in dropped comdat group sections.
(bfd_elf_discard_info): Do some eh_frame optimisation when
relocatable.
ld/
* ldlang.c (lang_add_section): Set up map_head.s and map_tail.s when
relocatable.
Presents .eh_frame input sections to the optimisation machinery in
elf-eh-frame.c in the order they are given by the linker script.
PR 16563
bfd/
* elflink.c (bfd_elf_discard_info): Process .eh_frame and .stab
in the order they are mapped to output sections.
ld/
* ldlang.c (map_head_is_link_order): Rename from
stripped_excluded_sections.
(lang_clear_os_map): New function, extracted from..
(strip_excluded_output_sections): ..here.
* ldlang.h (lang_clear_os_map): Declare.
* ldwrite.c (ldwrite): Call lang_clear_os_map.
* emultempl/sh64elf.em (sh64_elf_${EMULATION_NAME}_after_allocation):
Likewise.
When a shared library appears within --start-group/--end-group ld may
only discover a need for loading the library on the second or
subsequent pass over archive libraries, as more objects are extracted.
ld/
PR 17068
* ldlang.c (load_symbols): Always check flags.reload.
(open_input_bfds): Always reload --as-needed shared libraries,
not just when rescanning.
* ldlang.h (struct lang_input_statement_flags): Update reload comment.
* plugin.c (plugin_should_reload): Assume shared library arg.
* plugin.h (plugin_should_reload): Update comment.
ld/testsuite
* ld-elf/pr17068.s: New.
* ld-elf/pr17068a.s: New.
* ld-elf/pr17068b.s: New.
* ld-elf/pr17068c.s: New.
* ld-elf/pr17068d.s: New.
* ld-elf/pr17068e.s: New.
* ld-elf/pr17068ez.s: New.
* ld-elf/elf.exp: Run new test.
sys/param.h on recent versions of powerpc glibc ends up including
asm/elf.h via asm/sigcontex.h. asm/elf.h defines R_PPC_* and R_PPC64_*
macros, which clash with our include/elf/ppc.h and include/elf/ppc64.h.
It turns out that no current source uses LD_PATHMAX, so there is no
need for limits.h or sys/param.h, except for one occurrence of UINT_MAX.
I don't have a quarrel with limits.h, but it seems unnecessary just
for UINT_MAX.
* sysdep.h: Don't include limits.h and sys/param.h. Don't
include unistd.h twice.
(LD_PATHMAX): Don't define.
* ldlang.c (lang_common): Don't use UINT_MAX.
1) _SDA_BASE_ and _SDA2_BASE_ and defined automatically, in a similar
manner to the way _GLOBAL_OFFSET_TABLE_ is handled. It's a little
more complicated to remove the symbols because _SDA_BASE_ needs to
be there if either .sdata or .sbss is present, and similarly for
_SDA2_BASE.
2) The linker created .sdata and .sdata2 sections used for
R_PPC_EMB_SDAI16 and R_PPC_EMB_SDA2I16 pointers are created early.
Nowadays we strip unneeded sections from the output, so it isn't
necessary to delay creating the sections.
3) The output section for targets of various SDA relocs is now checked
as per the ABI(s). We previously allowed .sdata.foo and similar,
most likely because at some stage we were checking input sections.
Also, the patch fixes a long-standing bug in size_input_sections
that affects the values of symbols defined in stripped input
sections.
PR 16952
bfd/
* elf32-ppc.c (ppc_elf_create_linker_section): Move earlier.
Remove redundant setting of htab->elf.dynobj. Don't align.
Define .sdata symbols using _bfd_elf_define_linkage_sym.
(ppc_elf_create_glink): Call ppc_elf_create_linker_section.
(create_sdata_sym): Delete.
(elf_allocate_pointer_linker_section): Rename from
elf_create_pointer_linker_section. Align section.
(ppc_elf_check_relocs): Don't call ppc_elf_creat_linker_section
directly here, or create_sdata_sym. Set ref_regular on _SDA_BASE_
and _SDA2_BASE_.
(ppc_elf_size_dynamic_sections): Remove ATTRIBUTE_UNUSED on param.
Remove unnecessary tests on _SDA_BASE_ sym.
(maybe_strip_sdasym, ppc_elf_maybe_strip_sdata_syms): New functions.
(ppc_elf_relocate_section): Tighten SDA reloc symbol section checks.
* elf32-ppc.h (ppc_elf_set_sdata_syms): Delete.
(ppc_elf_maybe_strip_sdata_syms): Declare.
ld/
* emulparams/elf32ppccommon.sh (_SDA_BASE_, _SDA2_BASE_): Delete.
* emultempl/ppc32elf.em (ppc_before_allocation): Call
ppc_elf_maybe_strip_sdata_syms.
* ldlang.c (size_input_section): Correct output_offset value
for excluded input sections.
ld:
* ldlang.c (lang_finish): Don't call bfd_link_hash_table_free here.
(output_bfd_hash_table_free_fn): New variable.
(open_output): Save the _bfd_link_hash_table_free function for the
output_bfd into output_bfd_hash_table_free_fn.
* ldmain.c (ld_cleanup): If set, call output_bfd_hash_table_free_fn
on link_info.hash.
* ldlang.h (output_bfd_hash_table_free_fn): Declare.
ld/testsuite:
* ld-mmix/wrap1.d, ld-mmix/wrap1a.s, ld-mmix/wrap1b.s,
ld-mmix/wrap1c.s, ld-mmix/wrap2.d, ld-mmix/wrap3.d,
ld-mmix/wrap3a.s, ld-mmix/wrap3b.s, ld-mmix/wrap4.d: New
tests.
When aligning input sections, we are supposed to take the fill pattern
from a FILL statement, if there is one in the output section statement.
ld/
* ldlang.c (lang_size_sections_1 <lang_input_section_enum>): Use
current "fill", not "output_section_statement->fill".
ld/testsuite/
* ld-scripts/fill.d, * ld-scripts/fill.t, * ld-scripts/fill_0.s,
* ld-scripts/fill_1.s, * ld-scripts/fill_2.s: New test.
* ld-scripts/data.exp: Run it.
For libraries without a soname, -l:libfoo.so set DT_NEEDED to the search
dir plus filename, while gold and -lfoo just use the filename. This
patch fixes the inconsistency.
* ldlang.h (full_name_provided): New input flag.
* ldlang.c (new_afile): Don't use lang_input_file_is_search_file_enum
for -l:namespec. Instead use lang_input_file_is_l_enum with
full_name_provided flag.
* ldlfile.c (ldfile_open_file_search): Don't complete lib name if
full_name_provided flag is set.
* emultempl/elf32.em (gld${EMULATION_NAME}_open_dynamic_archive):
Handle full_name_provided libraries. Tidy EXTRA_SHLIB_EXTENSION
support. Set DT_NEEDED for -l:namespec as namespec.
* emultempl/aix.em (ppc_after_open_output): Handle full_name_provided.
* emultempl/linux.em (gld${EMULATION_NAME}_open_dynamic_archive):
Don't handle full_name_provided libraries.
* emultempl/pe.em (gld${EMULATION_NAME}_open_dynamic_archive): Ditto.
* emultempl/pep.em (gld${EMULATION_NAME}_open_dynamic_archive): Ditto.
* emultempl/vms.em (gld${EMULATION_NAME}_open_dynamic_archive): Ditto.
Ensures TLS orphans are placed adjacent to existing TLS sections,
and fixes places where the output_section_statement flags (which might
not be set) were tested when bfd_section flags were available.
* ldlang.c (lang_output_section_find_by_flags): Be careful to
test look->bfd_section->flags if available rather than
look->flags. Separate SEC_THREAD_LOCAL handling from
SEC_READONLY loop, and rewrite.
Adds a section for --as-needed libraries to a linker map file, similar
to what we do for archive libraries.
bfd/
* elflink.c (elf_link_add_object_symbols): Call minfo for --as-needed.
ld/
* ldlang.c (asneeded_list_head, asneeded_list_tail): New vars.
(lang_init): Initialise them.
(lang_print_asneeded): New function.
(lang_process): Call lang_print_asneeded.
* ldlang.h (struct asneeded_minfo): New.
(asneeded_list_tail): Declare.
* ldmain.c (add_archive_element): Improve archive map heading.
* ldmisc.c (minfo): Stash --as-needed info.
Modifies ld machinery tracking linker script assignments to notice all
assignments, not just those symbols mentioned in DEFINED().
ld/
PR ld/14962
* ldlang.h (struct lang_definedness_hash_entry): Add by_object and
by_script. Make iteration a single bit field.
(lang_track_definedness, lang_symbol_definition_iteration): Delete.
(lang_symbol_defined): Declare.
* ldlang.c (lang_statement_iteration): Expand comment a little.
(lang_init <lang_definedness_table>): Make it bigger.
(lang_track_definedness, lang_symbol_definition): Delete.
(lang_definedness_newfunc): Update.
(lang_symbol_defined): New function.
(lang_update_definedness): Create entries here. Do track whether
script definition of symbol is valid, even when also defined in
an object file.
* ldexp.c (fold_name <DEFINED>): Update.
(fold_name <NAME>): Allow self-assignment for absolute symbols
defined in a linker script.
ld/testsuite/
* ld-scripts/pr14962-2.d,
* ld-scripts/pr14962-2.t: New test.
* ld-scripts/expr.exp: Run it.
Tie output section statements to their associated output section via
output section userdata. This allows us to avoid hash lookups which
are slower and fail when multiple output sections have the same name.
* ldlang.h (lang_output_section_get): Define.
* ldlang.c (lang_output_section_get): Likewise.
(init_os): Set the output_section userdata to the output
section statement.
* emultempl/hppaelf.em: Use lang_output_section_get instead of
lang_output_section_find where applicable.
* emultempl/aarch64elf.em: Likewise.
* emultempl/aix.em: Likewise.
* emultempl/armelf.em: Likewise.
* emultempl/m68hc1xelf.em: Likewise.
* emultempl/metagelf.em: Likewise.
* emultempl/mipself.em: Likewise.
* emultempl/ppc64elf.em: Likewise.
* emultempl/spuelf.em: Likewise.
A long time ago ld made use of userdata to tie an output section to
its lang_input_statement_struct object file. Some time later Joern
made map file printing of symbols at lot faster, using userdata on
input sections. That complicated allocation of userdata, and when the
output section use disappeared a year later, the code wasn't properly
cleaned up. This patch does that cleanup, and also tidies the symbol
printing code to not allocate userdata where it won't be needed. We
don't print symbols defined in the absolute section or in output
sections.
* ld.h (fat_section_userdata_type, get_userdata): Move to..
* ldlang.h (input_section_userdata_type, get_userdata): ..here.
* ldlang.c (init_map_userdata): Delete. Fold into..
(sort_def_symbol): ..here. Don't attach input section userdata
to output sections or global bfd sections.
(lang_map): Don't pre-allocate input section userdata.
(init_os): Don't allocate userdata for output sections.
(print_all_symbols): Update.
This patch fixes 2 GNU_RELRO segment bugs:
1. lang_size_sections didn't properly align base to the maximum
alignment power of sections between DATA_SEGMENT_ALIGN and
DATA_SEGMENT_RELRO_END.
2. ld failed to adjust LOAD segment to generate GNU_RELRO segment
when LOAD segment doesn't fit GNU_RELRO segment. This is
https://sourceware.org/bugzilla/show_bug.cgi?id=14207
We "fixed" ld by not generating GNU_RELRO segment. This patch
adjusts LOAD segment to generate GNU_RELRO segment. It fixes
PR ld/16322 and at the same time it also fixes PR binutils/16323
since now we can adjust LOAD segment if it is too small.
bfd/
PR ld/14207
PR ld/16322
PR binutils/16323
* elf.c (_bfd_elf_map_sections_to_segments): Don't check section
size for PT_GNU_RELRO segment.
(assign_file_positions_for_load_sections): If PT_LOAD segment
doesn't fit PT_GNU_RELRO segment, adjust its p_filesz and p_memsz.
ld/
PR ld/14207
PR ld/16322
PR binutils/16323
* ldlang.c (lang_size_sections): Properly align RELRO base.
ld/testsuite/
PR ld/14207
PR ld/16322
PR binutils/16323
* ld-elf/pr16322.d: New file.
* ld-elf/pr16322.s: Likewise.
* ld-x86-64/pr14207.d: Expect PT_GNU_RELRO segment.
ld/
* ldlang.c (lang_size_sections_1): When given an lma_region align
LMA as per VMA only if lma_region is the same as region.
ld/testsuite/
* ld-scripts/rgn-at6.s, * ld-scripts/rgn-at6.t, * ld-scripts/rgn-at6.d,
* ld-scripts/rgn-at7.t, * ld-scripts/rgn-at7.d: New tests.
* ldexp.h (struct ldexp_control): Add "assign_name".
* ldexp.c (fold_name <NAME>): Compare and clear assign_name on match.
(exp_fold_tree_1): Remove existing code testing for self assignment.
Instead set and test expld.assign_name.
* ldlang.c (scan_for_self_assignment): Delete.
(print_assignment): Instead set and test expld.assign_name.
* ld.h (ld_config_type): New flag member separate_code.
* emultempl/elf32.em
(gld${EMULATION_NAME}_before_parse): Set it based on $SEPARATE_CODE.
* ldlang.c (ldlang_override_segment_assignment): If it's set, then
always return TRUE when SEC_CODE differs between the sections.
"section_relative_symbol" field to "update_dot".
* ldlang.c: Update all uses.
(strip_excluded_output_sections): Don't test update_dot_tree here..
(lang_leave_overlay): ..set update_dot here.
* ldemul.c (before_allocation_default): Revert last change.
ldlang.c (lang_add_section): Likewise.
(strip_excluded_output_sections): Don't strip output sections with
user input sections when emitrelocations, unless all are SEC_EXCLUDE.
ld/testsuite/
* ld-powerpc/vxworks-relax.rd: Remove check on reloc section
file offset and reloc symbol indices.
* ldlang.c (lang_process): Rerun lang_do_assignments before
starting garbage collection.
* ldexp.c (fold_name): Generate a reloc for defined symbols
found without an associated output section during the mark phase.
(exp_fold_tree_1): Continue processing an expression, even if we
are unable to fold it, if we are in the first two evaluation
phases.
* ldexp.h (enum lang_phase_type): Add descriptions of the phases.
* ld-gc/pr13683.c: New test source file.
* ld-gc/pr13683.d: New test control and output file.
* ld-gc/gc.exp: Run the pr13683 test.
* ld-cris/tls-gc-68: Update expected symbol table dump.
* ld-cris/tls-gc-69: Likewise.
* ld-cris/tls-gc-70: Likewise.
* ld-cris/tls-gc-71: Likewise.
* ld-cris/tls-gc-75: Likewise.
* ld-cris/tls-gc-76.d: Likewise.
* ld-cris/tls-gc-79.d: Likewise.
* ld.h (parsing_defsym): Delete.
* ldexp.c (exp_intop, exp_bigintop, exp_relop): Set type.filename.
(fold_binary, fold_name, exp_fold_tree_1, exp_get_vma, exp_get_fill,
exp_get_abs_int): Add tree arg for %S in error messages. Don't
fudge lineno.
(exp_binop, exp_unop, exp_nameop, exp_assop, exp_assert): Copy
type.filename from sub-tree.
(exp_trinop): Likewise, and use "cond" rather than "lhs".
* ldexp.h (node_type): Add filename field to struct.
* ldfile.c (ldfile_input_filename): Delete. Remove all refs.
* ldfile.h (ldfile_input_filename): Delete.
* ldgram.y (phdr_type, phdr_qualifiers, yyerror): Add NULL arg for
%S in error messages.
* ldemul.c (syslib_default, hll_default): Likewise.
* ldlang.c (lang_memory_region_lookup, lang_memory_region_alias,
lang_get_regions, lang_new_phdr): Likewise.
(lang_size_sections_1): Pass addr_tree for %S.
* ldlex.h (lex_redirect): Update prototype.
(ldlex_filename): Declare.
* ldlex.l (<EOF>): Don't set ldfile_input_filename.
(lex_redirect): Add fake_filename and count params. Push
fake_filename to file_name_stack and init lineno from count.
(ldlex_filename): New function.
(lex_warn_invalid): Use above.
* ldmain.c (main): Update lex_redirect call.
* ldmisc.c (vfinfo <%S>): Take file name and line number from
etree_type arg, or use current if arg is NULL.
* lexsup.c (parsing_defsym): Delete.
(parse_args <OPTION_DEFSYM>): Update lex_redirect call.
bfd_size_type.
(size_input_section): Change alignment_needed varible to
bfd_size_type.
* ld/ldlang.h (lang_padding_statement_type): Change size field to
bfd_size_type.
bfd/
* elf.c (assign_file_positions_for_load_sections): Set sh_offset for
.tbss, and page align same for all SHT_NOBITS sections.
ld/
* ldlang.c (lang_output_section_find_by_flags): Match orphan .sdata2
like sections to existing .sdata2, and similarly for orphan TLS
sections.
* emultempl/elf32.em (place_orphan): Exclude .tbss from orphan_bss.
* ldlang.c (enum open_bfd_mode): New.
(open_input_bfds): Replace "force" param with "mode". Reload
archives for rescan. Update all callers.
(lang_process): Make another open_input_bfds pass for plugins.
ld/ChangeLog:
2011-03-10 Dave Korn <dave.korn.cygwin@gmail.com>
* ldlang.h (lang_input_statement_type): Add new 'claim_archive' flag,
wrapping both it and 'claim' flag in #ifdef ENABLE_PLUGINS.
* ldmain.c (add_archive_element): Set it if the member is claimed.
* ldlang.c (new_afile): Initialise claim_archive and claimed members.
(find_replacements_insert_point): New helper function.
(lang_process): After adding and opening replacement files passed
from plugin, splice them into correct place in statement list and
file chains to preserve critical link order.
(lang_list_insert_after): New helper function.
(lang_list_remove_tail): Likewise.
The default language in version scripts is supposed to be C, but no
symbol demangling is performed on the symbols by default. This makes
targets with a symbol prefix to fail with most version scripts out
there. So strip away this prefix by default.
This fixes many tests (real world and ld's testsuite) for Blackfin
targets and doesn't seem to cause regressions for x86_64.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* ldexp.h (enum phase_enum): Comment. Add exp_dataseg_done.
* ldexp.c (fold_unary <DATA_SEGMENT_END>): Rearrange code. Test
for exp_dataseg_done rather than expld.phase == lang_final_phase_enum
to detect when we've finished sizing sections.
(fold_binary <DATA_SEGMENT_ALIGN>): Likewise.
(fold_binary <DATA_SEGMENT_RELRO_END>): Likewise. Also test
that we are not inside an output section statement.
* ldlang.c (lang_size_sections): Set exp_dataseg_done on exit if
not exp_dataseg_relro_adjust or exp_dataseg_adjust. Don't set
lang_final_phase_enum here.
(lang_process): Set lang_final_phase_enum here.
* ldlang.c (ldlang_def_chain_list): New variable. Contains a list
of symbols defined via the --defsym command line option and
currently waiting assignment.
(insert_defined): Add a defined symbol to the symbol table.
(ldlang_add_def): Add a entry to the ldlang_def_chain_list.
(lang_place_defineds): Walk ldlang_def_chain_list defining the
symbols.
(lang_process): Call lang_place_defineds.
(lang_add_assignment): If the assignment has come from a --defsym
command line option then call lang_add_def.
* ld-script/default-script2.d: Fix expected address for text
section.
PR gold/12001
* script.h (class Symbol_assignment: name): New member. Returns
the name of the symbol.
* scrfipt.cc (Script_options::is_pending_assignment): New member.
Returns true if the given symbol name is on the list of
assignments wating to be processed.
* archive.cc (should_incldue_member): If the symbol is undefined,
check to see if it is on the list of symbols pending assignment.
[PATCH] Add infrastructure for plugin API; functionality to follow.
include/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 1/6).
* plugin-api.h (LDPT_GNU_LD_VERSION): New ld_plugin_tag enum member.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 1/6).
* configure.in: Add AC_CHECKs for file io and dlfcn headers and
functions and AC_SEARCH for -ldl.
(enable_plugins): New shell variable set if above tests find dlopen
functionality.
(ENABLE_PLUGINS): Add related automake conditional.
* configure: Regenerate.
* config.in: Likewise.
* Makefile.am (PLUGIN_C): Declare plugin C source file, conditional
on ENABLE_PLUGINS being defined.
(PLUGIN_H): Likewise for header file.
(PLUGIN_OBJECT): Likewise for object file.
(PLUGIN_CFLAGS): Likewise -D flag required to compile plugin support.
(AM_CPPFLAGS): Use PLUGIN_CFLAGS.
(CFILES): Use PLUGIN_C.
(HFILES): Use PLUGIN_H.
(OFILES): Use PLUGIN_OBJECT.
(ld_new_SOURCES): Use PLUGIN_C.
(noinst_LTLIBRARIES)[ENABLE_PLUGINS]: Declare test plugin.
(libldtestplug_la_SOURCES)[ENABLE_PLUGINS]: Add automake definition
for test plugin.
(libldtestplug_la_CFLAGS)[ENABLE_PLUGINS]: Likewise.
(libldtestplug_la_LDFLAGS)[ENABLE_PLUGINS]: Likewise.
* Makefile.in: Regenerate.
* sysdep.h: Include stdarg.h, unistd.h and one of fcntl.h or
sys/file.h where available. Include dlfcn.h when ENABLE_PLUGINS.
(O_RDONLY): Supply default definition likewise to bfd's sysdep.h
(O_WRONLY): Likewise.
(O_RDWR): Likewise.
(O_ACCMODE): Likewise.
(O_BINARY): Likewise.
(SEEK_SET): Likewise.
(SEEK_CUR): Likewise.
(SEEK_END): Likewise.
* ldmisc.c (vfinfo): Make non-static. Add %p format char.
* ldmisc.h (vfinfo): Declare extern prototype.
* lexsup.c (enum option_values)[ENABLE_PLUGINS]: Add new entries for
OPTION_PLUGIN and OPTION_PLUGIN_OPT.
(ld_options[])[ENABLE_PLUGINS]: Add option data for the above two.
(parse_args)[ENABLE_PLUGINS]: Handle them, and load all plugins once
option parsing is complete.
* ldmain.c (main)[ENABLE_PLUGINS]: Call plugin cleanup hooks just
after lang_finish.
* plugin.c: New source file.
* plugin.h: Likewise new header.
* testplug.c: New source file.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 1/6).
* ld-bootstrap/bootstrap.exp: Skip static tests also if LD plugins
are enabled.
* lib/ld-lib.exp (proc regexp_diff): Extend verbose debug output.
(proc set_file_contents): Write a file with the supplied content.
(run_ld_link_tests): Add new 'ld' action to test linker output.
(proc check_plugin_api_available): Return true if linker under test
supports the plugin API.
* ld-plugin/func.c: New test source file.
* ld-plugin/main.c: Likewise.
* ld-plugin/text.c: Likewise.
* ld-plugin/plugin-1.d: New dump test output pattern script.
* ld-plugin/plugin-2.d: Likewise.
* ld-plugin/plugin-3.d: Likewise.
* ld-plugin/plugin-4.d: Likewise.
* ld-plugin/plugin-5.d: Likewise.
* ld-plugin/plugin.exp: New test control script.
---
[PATCH] Implement claim file and all symbols read hooks and add symbols callback.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 2/6).
* ldfile.c (ldfile_try_open_bfd)[ENABLE_PLUGINS]: Don't return early
during compat checks if they pass, instead offer any successfully
opened and accepted file to the plugin claim file hooks chain. Create
a dummy bfd to accept symbols added by the plugin, if the plugin
claims the file.
* ldlang.c (lang_process)[ENABLE_PLUGINS]: Call plugin all symbols
read hook chain before ldemul_after_open.
* ldlang.h (struct lang_input_statement_struct): Add new single-bit
'claimed' flag.
* plugin.c (IRONLY_SUFFIX): New macro for dummy bfd file suffix.
(IRONLY_SUFFIX_LEN): Length of the above string.
(plugin_get_ir_dummy_bfd): New function to create the dummy bfd used
to store symbols for ir-only files.
(is_ir_dummy_bfd): New function to check if a bfd is ir-only.
(asymbol_from_plugin_symbol): New function converts symbol formats.
(add_symbols): Call it to convert plugin syms to bfd syms and add
them to the dummy bfd.
* plugin.h: Add missing include guards.
(plugin_get_ir_dummy_bfd): Add prototype.
(is_ir_dummy_bfd): Likewise.
* testplug.c (TV_MESSAGE): New helper macro.
(struct claim_file): New struct.
(claim_file_t): New typedef.
(tag_names[]): Make static and const.
(claimfiles_list): New variable.
(claimfiles_tail_chain_ptr): Likewise.
(last_claimfile): Likewise.
(record_claim_file): Record a file to claim on a singly-linked list.
(parse_symdefstr): Parse an ASCII representation of a symbol from a
plugin option into the fields of a struct ld_plugin_symbol.
(record_claimed_file_symbol): Use it to parse plugin option for
adding a symbol.
(parse_option): Parse claim file and add symbol options.
(dump_tv_tag): Use TV_MESSAGE.
(onload): Likewise.
(onclaim_file): Make static. Use TV_MESSAGE. Scan list of files to
claim and claim this file if required, adding any symbols specified.
(onall_symbols_read): Make static and use TV_MESSAGE.
(oncleanup): Likewise.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 2/6).
* ld-plugin/plugin-3.d: Enable regexes for new functionality.
* ld-plugin/plugin-5.d: Likewise.
* ld-plugin/plugin-6.d: New testcase.
* ld-plugin/plugin-7.d: Likewise.
* ld-plugin/plugin.exp: Use 'nm' on compiled test objects to determine
whether symbols in plugin arguments need an underscore prefix. Add
new plugin-6.d and plugin-7.d testcases.
---
[PATCH] Implement get symbols callback.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 3/6).
* ldmain.c (notice)[ENABLE_PLUGINS]: Call plugin_notice.
* plugin.c (non_ironly_hash): Add new bfd hash table.
(plugin_load_plugins): Exit early if no plugins to load. If plugins
do load successfully, set notice_all flag in link info.
(get_symbols): Implement.
(plugin_load_plugins): Exit early if no plugins to load, else after
loading plugins successfully enable notice_all mode.
(init_non_ironly_hash): Lazily init non_ironly_hash table.
(plugin_notice): Record symbols referenced from non-IR files in the
non_ironly_hash. Suppress tracing, cref generation and nocrossrefs
tracking for symbols from dummy IR bfds.
* plugin.h: Fix formatting.
(plugin_notice): Add prototype.
* testplug.c (dumpresolutions): New global var.
(parse_options): Accept "dumpresolutions".
(onall_symbols_read): Get syms and dump resolutions if it was given.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 3/6).
* ld-plugin/plugin-8.d: New testcase.
* ld-plugin/plugin.exp: Invoke it.
---
[PATCH] Implement add input file, add input lib and set extra lib path callbacks.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 4/6).
* ldlang.c (lang_process)[ENABLE_PLUGINS]: Move invocation of
plugin_call_all_symbols_read to before setting of gc_sym_list, and
open any new input files that may have been added during it.
* ldmain.c (multiple_definition)[ENABLE_PLUGINS]: Call out to
plugin_multiple_definition and let it have first say over what to do
with the clashing definitions.
* plugin.c (no_more_claiming): New boolean variable.
(plugin_cached_allow_multiple_defs): Likewise.
(add_input_file): Implement.
(add_input_library): Likewise.
(set_extra_library_path): Likewise.
(plugin_call_claim_file): Don't do anything when no_more_claiming set.
(plugin_call_all_symbols_read): Set it. Disable link info
"allow_multiple_definition" flag, but cache its value.
(plugin_multiple_definition): New function.
* plugin.h (plugin_multiple_definition): Add prototype.
* testplug.c (addfile_enum_t): New enumerated typedef.
(add_file_t): New struct typedef.
(addfiles_list): New variable.
(addfiles_tail_chain_ptr): Likewise.
(record_add_file): New function.
(parse_option): Parse "add:", "lib:" and "dir:" options and call it.
(onall_symbols_read): Iterate the list of new files, libs and dirs,
adding them.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 4/6).
* ld-plugin/plugin-9.d: New testcase.
* ld-plugin/plugin.exp: Invoke it.
---
[PATCH] Add ELF symbol visibility support to plugin interface.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 5/6).
* plugin.c (asymbol_from_plugin_symbol): If the bfd is an ELF bfd,
find the elf symbol data and set the visibility in the st_other field.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 5/6).
* ld-plugin/plugin-ignore.d: New dump test control script.
* ld-plugin/plugin-vis-1.d: Likewise.
* ld-plugin/plugin.exp: Add list of ELF-only tests and run them if
testing on an ELF target.
---
[PATCH] Add archive support to plugin interface.
bfd/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* aoutx.h (aout_link_check_ar_symbols): Take new "subsbfd" reference
parameter and pass it when invoking add_archive_element callback.
(aout_link_check_archive_element): Handle substitute bfd if it
was set during add_archive_element callback in the above.
* cofflink.c (coff_link_check_ar_symbols): Take new "subsbfd" reference
parameter and pass it when invoking add_archive_element callback.
(coff_link_check_archive_element): Handle substitute bfd if it
was set during add_archive_element callback in the above.
* ecoff.c (read_ext_syms_and_strs): New function holds symbol-reading
code factored-out from ecoff_link_check_archive_element.
(reread_ext_syms_and_strs): Clear old symbols and call it.
(ecoff_link_check_archive_element): Use the above. Handle substitute
BFD if one is set by add_archive_element callback.
(ecoff_link_add_archive_symbols): Likewise allow bfd substitution.
* elflink.c (elf_link_add_archive_symbols): Likewise.
* linker.c (generic_link_check_archive_element): Likewise.
* pdp11.c (aout_link_check_ar_symbols): Take new "subsbfd" reference
parameter and pass it when invoking add_archive_element callback.
(aout_link_check_archive_element): Handle substitute bfd if it was
set during add_archive_element callback in the above.
* vms-alpha.c (alpha_vms_link_add_archive_symbols): Handle substitute
BFD if one is set by add_archive_element callback.
* xcofflink.c (xcoff_link_check_dynamic_ar_symbols): Take new "subsbfd"
reference parameter and pass it when invoking add_archive_element
callback.
(xcoff_link_check_ar_symbols): Likewise.
(xcoff_link_check_archive_element): Handle bfd substitution if it was
set by callback in the above.
include/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* bfdlink.h (struct_bfd_link_callbacks): Document new argument
to add_archive_element callback used to return a replacement bfd which
is to be added to the hash table in place of the original element.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* ldlang.c (load_symbols): Handle bfd subsitution when calling the
add_archive_element callback.
* ldmain.c (add_archive_element)[ENABLE_PLUGINS]: Offer the archive
member to the plugins and if claimed set "subsbfd" output parameter to
point to the dummy IR-only BFD.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* ld-plugin/plugin-10.d: New dump test control script.
* ld-plugin/plugin-11.d: Likewise.
* ld-plugin/plugin.exp: Run them.
---
* ldlang.c (lang_add_section): Don't copy SEC_RELOC from input
to output section on a final link.
bfd/
* elf.c (_bfd_elf_init_private_section_data): Allow for SEC_RELOC
difference between input and output section.
* ldlang.c (lang_add_section): Allow for debugging
section to be marked as noload but to keep content.
(IGNORE_SECTION): Likewise.
(lang_check_section_addresses): Likewise.
* ldwrite.c (build_link_order): Likewise.
* elf.c (bfd_elf_get_default_section_type): Don't test SEC_NEVER_LOAD.
* elflink.c (elf_link_input_bfd): Likewise.
ld/
* ld.texinfo (NOLOAD): Do not erroneously state that contents will
appear in output file.
* ldlang.c (lang_add_section): Clear SEC_HAS_CONTENTS on noload
unless SEC_COFF_SHARED_LIBRARY.
(map_input_to_output_sections): Don't set SEC_HAS_CONTENTS for noload
output sections.
(lang_size_sections_1): Don't test SEC_NEVER_LOAD when deciding
to update dot in region. Ditto when setting SEC_ALLOC if dot
advanced due to assignment.
* ldwrite.c (build_link_order): Don't test SEC_NEVER_LOAD.
* ldlang.h (lang_for_each_statement_worker): Declare.
* ldlang.c (lang_for_each_statement_worker): Make global. Don't
recurse into children of output_section_statement with constraint
set to -1.
(print_assignment): Handle NULL output_section->bfd_section.
(lang_size_sections_1): Ignore output section statement address
when constraint is -1.
* emultempl/xtensaelf.em (lang_for_each_statement_worker): Delete.
* NEWS: Mention change in linker script expression evaluation.
ld/
* ld.texinfo (Expression Section): Detail expression evaluation.
(Builtin Functions <ADDR>): Correct.
(Builtin Functions <LOADADDR>): Don't mention LOADADDR normally
the same as ADDR.
(Builtin Functions <SEGMENT_START>): Typo fix.
* ldexp.c (new_number): New function.
(make_abs, exp_get_abs_int): Cope with NULL expld.result.section.
(fold_unary <'~', '!', '-'>): Don't make_abs.
(fold_binary): Simplify result section logic. Return NULL section
for logical ops.
(fold_binary <SEGMENT_START>): Use new_rel_from_abs to set value to
a consistent result.
(fold_name <SIZEOF_HEADERS>): Return new_number, not new_abs.
(fold_name <DEFINED, SIZEOF, ALIGNOF, LENGTH, CONSTANT>): Likewise.
(fold_name <NAME>): No need to handle absolute symbols differently
from relative ones.
(fold_name <ORIGIN>): Don't return valid result when
lang_first_phase_enum. Return new_rel_from_abs, not new_abs.
(exp_fold_tree_1 <etree_value>): Return new_number, not new_rel.
(exp_fold_tree_1): Ajust for NULL expld.result.section. When assigning
a plain number to dot, assume the value is relative to expld.section.
Make terms not in an output section, absolute.
* ldlang.c (print_assignment): Fix style nit.
(lang_size_sections_1): Cope with NULL expld.result.section.
(lang_do_assignments_1): Likewise.
ld/testsuite/
* ld-scripts/memory.t: Remove ORIGIN fudge.
PR ld/11304
* elf.c (_bfd_elf_init_private_section_data): Rename need_group
to final_link and invert. For final link allow some flags to
differ. Don't specially allow flags to be all zero.
ld/
* ldlang.c (init_os): Remove isec param. Don't check for
bfd_section already set or call bfd_init_private_section_data
here.
(exp_init_os): Update init_os call.
(lang_add_section): Tidy. Really don't set SEC_LINK_ONCE
flags. Call bfd_init_private_section_data here.
(map_input_to_output_sections): Tidy. Update init_os calls.
Use os->sectype to select sec flags for lang_data_statement.
* ldlang.c (exp_init_os): Delete forward declaration.
(init_os): Don't check for bfd_section already created and don't
init addr_tree and load_base expressions here.
(map_input_to_output_sections): Only map input to output sections
and set constraints here, and as an exception, create output
sections which have their address set. Move all the other code to..
(create_other_output_sections): ..here. New function. Handle init
of addr_tree and load_base here too.
(lang_process): Call create_other_output_sections.
* ldfile.c: (ldfile_open_file): Do not stop link upon encountering
a missing file or library. Instead mark the entry as missing and
set the global flag to indicate that missing files were
encountered.
* ldlang.c (missing_files): New exported variable.
(load_symbols): Skip loading if the file is missing.
(open_input_bfds): Terminate link if any input files were
missing.
* ldlang.h (struct lang_input_statement_struct): Add missing_file
field.
Add export of missing_file variable.
* ld.h (struct args_type): Rename 'relax' field to
'disable_target_specific_optimizations' and turn it into a
tri-state variable.
(RELAXATION_DISABLED_BY_DEFAULT): New macro.
(RELAXATION_DISABLED_BY_USER): New macro.
(RELAXATION_ENABLED): New macro.
(DISABLE_RELAXATION): New macro.
(ENABLE_RELAXATION): New macro.
* lexsup (enum option_values): Add OPTION_NO_RELAX.
(struct ld_options): Add --no-relax.
(parse_args): Handle OPTION_NO_RELAX. Use DISABLE_RELAXATION and
ENABLE_RELAXATION macros.
* ldlang.c (lang_relax_sections): Use RELAXATION_ENABLED macro.
(lang_process): Likewise.
* ldmain.c (main): Initialise
disable_target_specific_optimizations field.
(multiple_definition): Use RELAXATION_ENABLED macro.
* ld.texinfo: Document new command line option.
* emultempl/alphaelf.em: Remove --no-relax option.
(before_allocation): Test RELAXATION_DISABLED_BY_USER macro.
Use ENABLE_RELAXATION macro.
* emultempl/avrelf.em: (after_allocation): Test RELAXATION_ENABLED
macro.
* emultempl/cr16elf.em: Remove --no-relax option.
(before_allocation): Test RELAXATION_DISABLED_BY_USER macro.
Use ENABLE_RELAXATION macro.
* emultempl/crxelf.em: Remove --no-relax option.
(before_allocation): Test RELAXATION_DISABLED_BY_USER macro.
Use ENABLE_RELAXATION macro.
* emultempl/mmix-elfnmmo.em: (before_allocation): Use
ENABLE_RELAXATION macro.
* emultempl/needrelax.em: (before_allocation): Use
ENABLE_RELAXATION macro.
* emultempl/ppc32elf.em: (before_allocation): Test
RELAXATION_DISABLED_BY_DEFAULT macro. Use
ENABLE_RELAXATION macro.
* emultempl/sh64elf.em: (before_allocation): Test
RELAXATION_ENABLED macro. Use DISABLE_RELAXATION macro.
* emultempl/xtensaelf.em: Remove --no-relax option.
(before_allocation): Test RELAXATION_ENABLED macro.
Use ENABLE_RELAXATION macro.
* ldlang.h (struct lang_input_statement_struct): Rename add_needed
to add_DT_NEEDED_for_dynamic. Rename as_needed to
add_DT_NEEDED_for_regular.
* ldlang.c: Likewise.
* ldlang.h: Likewise.
* ldlang.c: Use the new variable names.
* ldgram.y: Likewise.
* emultempl/elf32.em: Likewise.
* ld.texinfo: Document the renamed option. Also mention its
affect on the resolution of dynamic symbols.
* NEWS: Mention the changed option name.
* ldlang.c (lang_new_phdr): Check PHDRS and FILEHDR in loadable
segments do not appear after a different loadable segment.
* ld.texinfo (PHDRS): Document order of processing segments.
Document where PHDRS and FILEHDR may appear.
ld/testsuite/
* ld-scripts/phdrs3.d: New.
* ld-scripts/phdrs3.t: New.
* ld-scripts/phdrs3.exp: New.
keyword in c++.
* bfd/aoutx.h (NAME (aout, make_empty_symbol)): Rename variable
new to new_symbol.
* bfd/coffgen.c (coff_make_empty_symbol)
(coff_bfd_make_debug_symbol): Rename variable new to new_symbol.
* bfd/cpu-ia64-opc.c (ext_reg, ins_imms_scaled): Rename variable
new to new_insn.
* bfd/doc/chew.c (newentry, add_intrinsic): Rename variable new to
new_d.
* bfd/ecoff.c (_bfd_ecoff_make_empty_symbol): Rename variable new
to new_symbol.
* bfd/elf32-m68k.c (elf_m68k_get_got_entry_type): Rename argument
new to new_reloc.
* bfd/hash.c (bfd_hash_lookup): Rename variable new to new_string.
* bfd/ieee.c (ieee_make_empty_symbol): Rename variable new to
new_symbol.
* bfd/linker.c (bfd_new_link_order): Rename variable new to
new_lo.
* bfd/mach-o.c (bfd_mach_o_sizeof_headers): Rename variable new to
symbol.
* bfd/oasys.c (oasys_make_empty_symbol): Rename variable new to
new_symbol_type.
* bfd/pdp11.c (NAME (aout, make_empty_symbol)): Rename variable
new to new_symbol_type.
* bfd/plugin.c (bfd_plugin_make_empty_symbol): Rename variable new
to new_symbol.
* bfd/rs6000-core.c (CoreHdr, VmInfo): Rename union member new to
new_dump.
(read_hdr, rs6000coff_core_p)
(rs6000coff_core_file_matches_executable_p)
(rs6000coff_core_file_failing_command)
(rs6000coff_core_file_failing_signal): Updated function to use new
union member name.
* bfd/som.c (som_make_empty_symbol): Rename variable new to
new_symbol_type.
* bfd/syms.c (_bfd_generic_make_empty_symbol): Rename variable new
to new_symbol.
* bfd/tekhex.c (first_phase, tekhex_make_empty_symbol): Rename
variable new to new_symbol.
* binutils/nlmconv.c (main): Rename variable new to new_name.
* gas/config/tc-arm.c (insert_reg_alias): Rename variable new to
new_reg.
* gas/config/tc-dlx.c (parse_operand): Rename variable new to
new_pos.
* gas/config/tc-ia64.c (ia64_gen_real_reloc_type): Rename variable
new to newr.
* gas/config/tc-mcore.c (parse_exp, parse_imm): Rename variable
new to new_pointer.
* gas/config/tc-microblaze.c (parse_exp, parse_imm, check_got):
Change name from new to new_pointer.
* gas/config/tc-or32.c (parse_operand): Rename variable new to
new_pointer.
* gas/config/tc-pdp11.c (md_assemble): Rename variable new to
new_pointer.
* gas/config/tc-pj.c (alias): Change argument new to new_name.
* gas/config/tc-score.c (s3_build_score_ops_hsh): Rename variable
new to new_opcode. (s3_build_dependency_insn_hsh) Rename variable
new to new_i2n. (s3_convert): Rename variables old and new to
r_old and r_new.
* gas/config/tc-score7.c (s7_build_score_ops_hsh): Rename variable
new to new_opcode. (s7_build_dependency_insn_hsh): Rename variable
new to new_i2d. (s7_b32_relax_to_b16, s7_convert_frag): Rename
variables old and new to r_old and r_new.
* gas/config/tc-sh.c (parse_exp): Rename variable new to
new_pointer.
* gas/config/tc-sh64.c (shmedia_parse_exp): Rename variable new to
new_pointer.
* gas/config/tc-tic4x.c (tic4x_operand_parse): Rename variable new
to new_pointer.
* gas/config/tc-z8k.c (parse_exp): Rename variable new to
new_pointer.
* gas/listing.c (listing_newline): Rename variable new to new_i.
* ld/ldexp.c (exp_intop, exp_bigintop, exp_relop, exp_binop)
(exp_trinop, exp_unop, exp_nameop, exp_assop): Rename variable new
to new_e.
* ld/ldfile.c (ldfile_add_library_path): Rename variable new to
new_dirs. (ldfile_add_arch): Rename variable new to new_arch.
* ld/ldlang.c (new_statement, lang_final, lang_add_wild)
(lang_target, lang_add_fill, lang_add_data, lang_add_assignment)
(lang_add_insert): Rename variable new to new_stmt. (new_afile):
Added missing cast. (lang_memory_region_lookup): Rename variable
new to new_region. (init_os): Rename variable new to
new_userdata. (lang_add_section): Rename variable new to
new_section. (ldlang_add_undef): Rename variable new to
new_undef. (realsymbol): Rename variable new to new_name.
* opcodes/z8kgen.c (internal, gas): Rename variable new to new_op.
Updated sources to avoid using the identifier name "template",
which is a keyword in c++.
* bfd/elf32-arm.c (struct stub_def): Rename member template to
template_sequence. (arm_build_one_stub,
find_stub_size_and_template, arm_size_one_stub, arm_map_one_stub):
Rename variable template to template_sequence.
* bfd/elfxx-ia64.c (elfNN_ia64_relax_br, elfNN_ia64_relax_brl):
Rename variable template to template_val.
* gas/config/tc-arm.c (struct asm_cond, struct asm_psr, struct
asm_barrier_opt): Change member template to
template_name. (md_begin): Update code to reflect new member
names.
* gas/config/tc-i386.c (struct templates, struct _i386_insn)
(match_template, cpu_flags_match, match_reg_size, match_mem_size)
(operand_size_match, md_begin, i386_print_statistics, pi)
(build_vex_prefix, md_assemble, parse_insn, optimize_imm)
(optimize_disp): Updated code to use new names. (parse_insn):
Added casts.
* gas/config/tc-ia64.c (dot_template, emit_one_bundle): Updated
code to use new names.
* gas/config/tc-score.c (struct s3_asm_opcode): Renamed member
template to template_name. (s3_parse_16_32_inst, s3_parse_48_inst,
s3_do_macro_ldst_label, s3_build_score_ops_hsh): Update code to
use new names.
* gas/config/tc-score7.c (struct s7_asm_opcode): Renamed member
template to template_name. (s7_parse_16_32_inst,
s7_do_macro_ldst_label, s7_build_score_ops_hsh): Update code to
use new names.
* gas/config/tc-tic30.c (md_begin, struct tic30_insn)
(md_assemble): Update code to use new names.
* gas/config/tc-tic54x.c (struct _tic54x_insn, md_begin)
(optimize_insn, tic54x_parse_insn, next_line_shows_parallel):
Update code to use new names.
* include/opcode/tic30.h (template): Rename type template to
insn_template. Updated code to use new name.
* include/opcode/tic54x.h (template): Rename type template to
insn_template.
* opcodes/cris-dis.c (bytes_to_skip): Update code to use new name.
* opcodes/i386-dis.c (putop): Update code to use new name.
* opcodes/i386-gen.c (process_i386_opcodes): Update code to use
new name.
* opcodes/i386-opc.h (struct template): Rename struct template to
insn_template. Update code accordingly.
* opcodes/i386-tbl.h (i386_optab): Update type to use new name.
* opcodes/ia64-dis.c (print_insn_ia64): Rename variable template
to template_val.
* opcodes/tic30-dis.c (struct instruction, get_tic30_instruction):
Update code to use new name.
* opcodes/tic54x-dis.c (has_lkaddr, get_insn_size)
(print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
Update code to use new name.
* opcodes/tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
Update type to new name.
* ld.h (fat_user_section_struct): Add map_symbol_def_count field.
* ldlang.c (hash_entry_addr_cmp): New function.
(print_all_symbols): Sort the symbols by address before printing them.
assignment inside output section statement. Ensure only one
set of symbols per output section.
* emultempl/pe.em (gld_${EMULATION_NAME}_place_orphan): Add non-
dollar sections before dollar sections. Correct add_child
list insertion.
* emultempl/pep.em (gld_${EMULATION_NAME}_place_orphan): Likewise.
if it is not overridden and section is for the same vma region as
the previous section.
* ld-scripts/rgn-at.exp: New.
* ld-scripts/rgn-at.s: New.
* ld-scripts/rgn-at1.d: New.
* ld-scripts/rgn-at1.t: New.
* ld-scripts/rgn-at2.d: New.
* ld-scripts/rgn-at2.t: New.
* ld-scripts/rgn-at3.d: New.
* ld-scripts/rgn-at3.t: New.
* ldlang.c: Likewise.
* ldlang.h: Likewise.
* ldlex.l: Likewise.
* NEWS: Mention the new feature.
* ld.texinfo: Document the new feature.
* ld-scripts/regions-alias-1.t: New file.
* ld-scripts/regions-alias-2.t: New file.
* ld-scripts/regions-alias-3.t: New file.
* ld-scripts/regions-alias-4.t: New file.
* ld-scripts/script.exp: Run region alias tests.
PR 7047
* bfdlink.h (struct bfd_elf_version_expr): Delete "symbol".
Add "literal".
bfd/
PR 7047
* configure.in: Bump version.
* configure: Regenerate.
* elflink.c (_bfd_elf_link_assign_sym_version): Continue matching
against version nodes when a global match is a wildcard. Similarly
continue matching on local wildcard matches, rather than only
continuing for "*". Have any global wildcard match override a
local wildcard match. Correct logic hiding unversioned symbol.
(bfd_elf_size_dynamic_sections): Update for changes to struct
bfd_elf_version_expr.
ld/
PR 7047
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_new_vers_pattern): Update
for changes to struct bfd_elf_version_expr.
* ldlang.c (lang_vers_match, version_expr_head_hash): Likewise.
(version_expr_head_eq, lang_finalize_version_expr_head): Likewise.
(lang_register_vers_node): Likewise.
(lang_new_vers_pattern): Likewise. Ensure "literal" is set when
no glob chars found in "pattern".
(realsymbol): Correct backslash quote logic.
* ld.texinfo (VERSION): Warn about global wildcards.
(lang_output_section_statement_lookup): Update prototype.
* ldlang.c (lang_output_section_find,
lang_output_section_statement_lookup_1): Merge into..
(lang_output_section_statement_lookup): ..here. Update all callers.
(process_insert_statements): Set constraint negative
for output section statements we might be inserting. Make error
fatal on not finding insertion section.
(lang_output_section_find): Rather than comparing
output_section_statement.constraint against -1, test whether
it is postive.
(lang_output_section_statement_lookup_1): Likewise.
(output_prev_sec_find, strip_excluded_output_sections): Likewise.
(lang_record_phdrs): Likewise.
* emultempl/elf32.em (output_rel_find): Likewise.
* NEWS: Mention INSERT.
* ldexp.c (fold_binary <DATA_SEGMENT_ALIGN>): Do not align
EXPLD.DATASEG.MIN_BASE.
* ldlang.c (lang_size_sections): New variable OLD_BASE. Rename
OLD_MIN_BASE to MIN_BASE with the former alignment from `ldexp.c'.
Use OLD_BASE now for the minimal base check after the base decrease by
the maximum alignment found.
statement has an update_dot_tree expression, apply it to
print_dot.
(print_input_section): Do not update print_dot if it would move
print_dot backwards.
(lang_do_assignments_1): If the output section statement has an
update_dot_tree expression apply it to dot.
* ld-scripts/overlay-size.t (end_of_bss_overlays): Define.
(end_of_text_overlays): Define.
(end_of_data_overlays): Define.
* ld-scripts/overlay-size-map.d: Add expected values for
end_of_bss_overlays, end_of_text_overlays and
end_of_data_overlays.
* ld.texinfo: Likewise.
* ldlang.c: Formatting throughout.
(archive_path): Only assume "[A-Za-z]:" is a dos drive.
(input_statement_is_archive_path): New function, extracted from..
(walk_wild): ..here.
(walk_wild_consider_section): Match archive:path here too.
(init_map_userdata, sort_def_symbol): Convert to ISO C.
* ldmain.c (main): Set link_info.path_separator.
* emultempl/spuelf.em (choose_target): Don't set it here.
* testsuite/ld-elfcomm/elfcomm.exp (test_sort_common): Test the
ascending/descending argument to the --sort-common command line
option.
* testsuite/ld-elfcomm/sort-common.s: New file.
* ld.h (enum sort_order): New.
* ldlang.c (lang_check: Fix comment.
(lang_common): Sort commons in ascending or descending order.
(lang_one_common): Likewise.
* lexsup.c (ld_options): Have --sort-common take an option
argument.
(parse_args): Handle argument to --sort-common.
* ld.texinfo (--sort-common): Document new optional argument.
* NEWS: Mention new feature.
* ldlang.c (lang_size_sections_1): Honour the setting of an
lma_region even if there is no vma region set, or the vma region
is the same as the lma region.
PR 5604
* elf-bfd.h (struct elf_backend_data): Add gc_keep. Remove param
names from others.
(_bfd_elf_gc_keep): Declare.
* elfxx-target.h (elf_backend_gc_keep): Define.
(elfNN_bed): Init new field.
* elflink.c (_bfd_elf_gc_keep): New function.
(bfd_elf_gc_sections): Call gc_keep.
* elf64-ppc.c (elf_backend_gc_keep): Define.
(struct _ppc64_elf_section_data): Move .opd related fields to
a struct so they don't occupy the same storage. Adjust accesses
throughout file.
(ppc64_elf_gc_keep): New function, split out from..
(ppc64_elf_gc_mark_hook): ..here. Don't call _bfd_elf_gc_mark
to mark .opd section, just set gc_mark.
(ppc64_elf_edit_opd): Remove no_opd_opt parm. Don't set opd->adjust
unless we are changing .opd. Test non-NULL opd->adjust at all
accesses throughout file.
* elf64-ppc.h (ppc64_elf_edit_opd): Update prototype.
ld/
PR 5604
* ldlang.c (lang_gc_sections): Move code to set SEC_KEEP on entry
syms to _bfd_elf_gc_keep.
* emultempl/ppc64elf.em (ppc_before_allocation): Don't call
ppc64_elf_edit_opd if no_opd_opt.
2008-01-11 Tristan Gingold <gingold@adacore.com>
Eric Botcazou <ebotcazou@adacore.com>
* ldlang.c (lang_end): Warns if the entry point is not found when
--gc-sections.
Emit an error if no root is specified when --gc-sections -r.
* ld.texinfo (Options): Document that --gc-sections is compatible
with -r and -q.
* ldmain.c (main): Do not error out if -r and --gc-sections.
* scripttempl/elf.sc: Emit ENTRY command only if relocating.
ld/testsuite:
2008-01-11 Tristan Gingold <gingold@adacore.com>
* lib/ld-lib.exp (check_gc_sections_available): Now available on
VxWorks.
* ld-gc: New directory for testing --gc-sections.
* ld-gc/gc.c: New file.
* ld-gc/gc.exp: New file.
* ld-gc/noent.s: New file.
* ld-gc/noent.d: New file.
* ldlang.c (lang_check_section_addresses): Also report size of
overflow for any overflowed memory regions.
(os_region_check): Diagnose an overflowed region only once per
region. Do not reset region->current on overflow.
2007-10-17 Zack Weinberg <zack@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* ld-scripts/rgn-over.exp: New driver.
* ld-scripts/rgn-over.s: New file.
* ld-scripts/rgn-over1.d, ld-scripts/rgn-over1.t,
ld-scripts/rgn-over2.d, ld-scripts/rgn-over2.t,
ld-scripts/rgn-over3.d, ld-scripts/rgn-over3.t,
ld-scripts/rgn-over4.d, ld-scripts/rgn-over4.t,
ld-scripts/rgn-over5.d, ld-scripts/rgn-over5.t,
ld-scripts/rgn-over6.d, ld-scripts/rgn-over6.t,
ld-scripts/rgn-over7.d, ld-scripts/rgn-over7.t:
New test cases.
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* elf32-arm.c (elf32_arm_compare_mapping): Compare first on vma,
then on type.
binutils/testsuite:
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* binutils-all/ar.exp (long_filenames): Delete temporary files on
the host.
* binutils-all/arm/objdump.exp: Only check "which $OBJDUMP" if
host is local.
* binutils-all/objcopy.exp: Use ${srecfile} to get the name of the
srec file to be passed to binutils_run.
(objcopy_test_readelf): Use remote_exec.
* binutils-all/readelf.exp (readelf_find_size): Use remote_exec.
(readelf_test): Likewise.
(readelf_wi_test): Likewise.
* lib/utils-lib.exp (run_dump_test): Only check "which $binary" if
host is local. Use remote_exec. Use $tempfile not
tmpdir/bintest.o.
gas:
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* as.c (main): Flush stderr before printing listings to ensure
consistent output order across platforms.
gas/testsuite:
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* lib/gas-defs.exp (gas_version): Use remote_* functions instead
of exec.
(gas_host_run): New.
(gas_run): Use gas_host_run.
(gas_start): Likewise.
(run_dump_test): Likewise.
(objdump): Use gas_host_run.
(objdump_start_no_subdir): Likewise.
* lib/gas-dg.exp (gas-dg-test): Use "remote_file host delete".
* lib/run: Remove.
* gas/macros/macros.exp: Download app4b.s to host.
* gas/i386/i386.exp (gas_64_check): Use gas_host_run.
(gas_32_check): Likewise.
* gas/maxq10/maxq10.exp (gas_64_check): Likewise
(gas_32_check): Likewise.
* gas/maxq20/maxq20.exp (gas_64_check): Likewise
(gas_32_check): Likewise.
* gas/sparc/sparc.exp (gas_64_check): Likewise.
* gas/cfi/cfi.exp: Likewise.
* gas/elf/elf.exp (run_list_test): Likewise. Use temporary file
for readelf output in place of pipe.
* gas/all/gas.exp: Download incbin.dat to host.
(do_comment): Allow \r\r\n.
ld:
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* ldlang.c (sort_sections_by_lma): Sort by internal id after lma
for stable sort.
ld/testsuite:
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* ld-elfcomm/elfcomm.exp: Use run_host_cmd. Only check "which
$CC" if host is local.
* ld-checks/checks.exp: Use run_host_cmd.
* ld-elf/exclude.exp: Likewise.
* ld-elf/elf.exp: Download merge.ld if host is remote.
* ld-elf/binutils.exp (binutils_test): Use remote_exec.
* ld-elf/tls_common.exp: Use run_host_cmd.
* lib/ld-lib.exp (ld_version): Only check "which $ld" if host is
local. Use remote_exec.
(run_host_cmd): New.
(run_host_cmd_yesno): New.
(default_ld_relocate): Use run_host_cmd_yesno.
(default_ld_link): Likewise.
(default_ld_simple_link): Use run_host_cmd.
(default_ld_compile): Only check "which $ccprog" if host is local.
Use remote_file and remote_exec.
(default_ld_assemble): Only check "which $as" if host is local.
Use run_host_cmd.
(default_ld_nm): Use remote_exec, remote_upload and remote_file.
(run_dump_test): Use remote_exec, remote_upload and remote_file.
Only check "which $binary" if host is local.
(run_ld_link_tests): Use remote_exec, remote_upload and
remote_file.
* ld-selective/selective.exp: Only check "which $CXX" if host is
local. Use remote_exec.
* ld-scripts/phdrs.exp: Only check "which $objdump" if host is
local. Use run_host_cmd.
* ld-scripts/phdrs2.exp: Likewise.
* ld-scripts/weak.exp: Likewise.
* ld-undefined/weak-undef.exp: Likewise.
* ld-scripts/crossref.exp: Only check "which $CC" if host is local.
Use run_host_cmd.
* ld-scripts/map-address.exp: Upload map_address.map if host is
remote.
* ld-srec/srec.exp (run_srec_tests): Use run_host_cmd. Only check
"which $CC" and "which $CXX" if host is local.
* ld-undefined/undefined.exp: Only check "which $CC" if host is
local. Use remote_file and run_host_cmd.
* config/default.exp: Use remote_exec to create tmpdir.
* ldlang.c (lang_insert_orphan): When searching through linker
script to place an orphan, don't stop on statements that appear
outside of SECTIONS.
* emultempl/elf32.em (output_rel_find): Prefer read-only alloc
sections over read/write alloc sections.
ld/testsuite/
* ld-elf/weak-dyn-1.rd: Adjust.
* ldlang.h (enum section_type): Add overlay_section.
* ldlang.c (lang_add_section): Handle flags for overlay_section
as per normal_section.
(lang_size_sections_1): When setting lma, detect overlays by
os->sectype rather than by looking for overlapping vmas.
(lang_enter_overlay_section): Use overlay_section type.
(lang_leave_overlay): Set first overlay section to normal.
ld/testsuite/
* ld-spu/ovl.lnk: Use OVERLAY keyword.
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Mention -l:foo.
* ld.texinfo: Document it.
* ldlang.c (new_afile): If a lang_input_file_is_l_enum
entry as a name beginning with a coloh, convert it to a
lang_input_file_is_search_file_enum entry without the colon.
ld/testsuite/
* ld-libs/lib-1.s, ld-libs/lib-2.s, ld-libs/lib-2.d,
* ld-libs/libs.exp: New files.
* ldlang.c (lang_insert_orphan): Provide start/stop loadaddr syms
rather than defining unconditionally.
(lang_leave_overlay_section): Likewise.
* ld.texinfo (Overlay Description): Update description and examples
for start/stop syms.
ld/testsuite/
* ld-elf/overlay.d: -u symbols we want to see in the output.
2007-01-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3831
* elf-bfd.h (bfd_elf_link_mark_dynamic_symbol): Add an
argument, Elf_Internal_Sym *.
* elflink.c (bfd_elf_link_mark_dynamic_symbol): Mark a data
symbol dynamic if info->dynamic_data is TRUE.
(bfd_elf_record_link_assignment): Updated call to
bfd_elf_record_link_assignment.
(_bfd_elf_merge_symbol): Likewise. Always call
bfd_elf_link_mark_dynamic_symbol.
include/
2007-01-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3831
* bfdlink.h (bfd_link_info): Rename dynamic to dynamic_list.
Add dynamic and dynamic_data.
ld/
2007-01-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3831
* NEWS: Mention -Bsymbolic-functions, --dynamic-list-data and
--dynamic-list-cpp-new.
* ld.texinfo: Document -Bsymbolic-functions, --dynamic-list-data
and --dynamic-list-cpp-new.
* ldlang.c (lang_append_dynamic_list_cpp_new): New.
(lang_process): Change link_info.dynamic to
link_info.dynamic_list.
(lang_append_dynamic_list): Likewise.
* ldmain.c (main): Likewise. Initialize link_info.dynamic and
link_info.dynamic_data to FALSE.
* ldlang.h (lang_append_dynamic_list_cpp_new): New.
* lexsup.c (option_values): Add OPTION_DYNAMIC_LIST_DATA and
OPTION_DYNAMIC_LIST_CPP_NEW.
(ld_options): Add entries for -Bsymbolic-functions,
--dynamic-list-data and --dynamic-list-cpp-new. Make
-Bsymbolic-functions an alias of --dynamic-list-data.
(parse_args): Change link_info.dynamic to link_info.dynamic_list.
Set link_info.dynamic to TRUE for --dynamic-list and
--dynamic-list-cpp-typeinfo. Handle --dynamic-list-data and
--dynamic-list-cpp-new.
ld/testsuite/
2007-01-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3831
* ld-elf/del.cc: New.
* ld-elf/dl5.cc: Likewise.
* ld-elf/dl5.out: Likewise.
* ld-elf/new.cc: Likewise.
* ld-elf/shared.exp: Add tests for --dynamic-list-data and
--dynamic-list-cpp-new.
